-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00 --------------------------------------------------------------------------- -- (C)opyright 2009-2014 bintec elmeg GmbH --------------------------------------------------------------------------- FEC-BAC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, mib-2, enterprises FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC InterfaceIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF bibo FROM BINTEC-MIB; --------------------------------------------------------------------------- -- bacMIB --------------------------------------------------------------------------- bacMIB MODULE-IDENTITY LAST-UPDATED "201109130000Z" ORGANIZATION "bintec elmeg GmbH" CONTACT-INFO "EMail: info@bintec-elmeg.com Web: www.bintec-elmeg.com" DESCRIPTION "The MIB module for Bandwidth Admission Control (BAC) administration entities." REVISION "200911200000Z" DESCRIPTION "Initial revision" REVISION "201109130000Z" DESCRIPTION "Global switch for admission control was added." ::= { bibo 60 } --------------------------------------------------------------------------- -- OID groups & all tables --------------------------------------------------------------------------- bacConf OBJECT IDENTIFIER -- bacPropertyTable 1 -- bacPropertyStatusTable 2 -- bacEntityRelationTable 3 -- bacInterfaceRelationTable 4 -- bacAddressTable 5 -- bacAudioCodecPropertyTable 6 -- bacGlobal 7 ::= { bacMIB 1 } --------------------------------------------------------------------------- -- bacGlobal --------------------------------------------------------------------------- bacGlobal OBJECT IDENTIFIER ::= { bacConf 7 } bacGlobalAdmissionDefault OBJECT-TYPE SYNTAX INTEGER { forbidden(1), private-networks-only(2), unrestriced(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default behaviour for admission checking, if not any entity relation is configured for a given voip entity. forbidden(1) : Admission is always refused. private-networks-only(2): Admission is granted, if IP of voip entity is a private network address (see RFC 1918 and RFC 5735). unrestriced(3) : Admission is always granted." DEFVAL { private-networks-only } ::= { bacGlobal 1 } --------------------------------------------------------------------------- -- bacPropertyTable --------------------------------------------------------------------------- bacPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF BacPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configured bandwidth admission control property entries. Typically one entry is created for each IP interface (WAN, LAN, WLAN) and describes mainly the static bandwidth properties for this interface. A hierarchical relation can be achived, by defining a parent property entry via bacPropertyParentIndex field." ::= { bacConf 1 } bacPropertyEntry OBJECT-TYPE SYNTAX BacPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacPropertyTable" INDEX { bacPropertyIndex } ::= { bacPropertyTable 1 } BacPropertyEntry ::= SEQUENCE { bacPropertyIndex INTEGER, bacPropertyDescr DisplayString, bacPropertyParentIndex INTEGER, bacPropertyDscpSignalling INTEGER, bacPropertyDscpAudio INTEGER, bacPropertyBwConfigUp INTEGER, bacPropertyBwConfigDown INTEGER, bacPropertyAdminStatus INTEGER } bacPropertyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index in this property table." ::= { bacPropertyEntry 1 } bacPropertyDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The description of the bandwidth property entry." ::= { bacPropertyEntry 2 } bacPropertyParentIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the parent BAC property. Is 0, if no parent defined." ::= { bacPropertyEntry 3 } bacPropertyDscpSignalling OBJECT-TYPE SYNTAX INTEGER (0 .. 63) MAX-ACCESS read-write STATUS current DESCRIPTION "The 6 bit DSCP value used in IP header for signalling data." DEFVAL { 46 } -- 46 is binary 101110, see RFC 2598 (expedited forwarding) ::= { bacPropertyEntry 4 } bacPropertyDscpAudio OBJECT-TYPE SYNTAX INTEGER (0 .. 63) MAX-ACCESS read-write STATUS current DESCRIPTION "The 6 bit DSCP value used IP header for media data." DEFVAL { 46 } -- 46 is binary 101110, see RFC 2598 (expedited forwarding) ::= { bacPropertyEntry 5 } bacPropertyBwConfigUp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The configured bandwidth for up direction." ::= { bacPropertyEntry 6 } bacPropertyBwConfigDown OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The configured bandwidth for down direction." ::= { bacPropertyEntry 7 } bacPropertyAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If the AdminStatus is set to enabled(1) this entry will be used, if set to disabled(2) it won't be used. You may also delete this entry by changing it to delete(3)." DEFVAL { enabled } ::= { bacPropertyEntry 8 } --------------------------------------------------------------------------- -- bacPropertyStatusTable --------------------------------------------------------------------------- bacPropertyStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF BacPropertyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of bandwidth admission control property entries. Typically one entry is created for each interface (WAN, LAN, WLAN) and describes the dynamic properties of this interface. Each entry is the dynamic part of the properties defined in bacPropertyTable and is referenced by bacPropertyStatusIndex." ::= { bacConf 2 } bacPropertyStatusEntry OBJECT-TYPE SYNTAX BacPropertyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacPropertyStatusTable." INDEX { bacPropertyStatusIndex } ::= { bacPropertyStatusTable 1 } BacPropertyStatusEntry ::= SEQUENCE { bacPropertyStatusIndex INTEGER, bacPropertyStatusBwReservedUp INTEGER, bacPropertyStatusBwReservedDown INTEGER, bacPropertyStatusBwInterfaceUp INTEGER, bacPropertyStatusBwInterfaceDown INTEGER } bacPropertyStatusIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index in this status table. This index is used to reference the entry in bacPropertyTable where it is used as index as well." ::= { bacPropertyStatusEntry 1 } bacPropertyStatusBwReservedUp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The currently reserved bandwidth for up direction." DEFVAL { 0 } ::= { bacPropertyStatusEntry 2 } bacPropertyStatusBwReservedDown OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The currently reserved bandwidth for down direction." DEFVAL { 0 } ::= { bacPropertyStatusEntry 3 } bacPropertyStatusBwInterfaceUp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of the corresponding interface for up direction. 0 if no interface available or no information about interface available." DEFVAL { 0 } ::= { bacPropertyStatusEntry 4 } bacPropertyStatusBwInterfaceDown OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of the corresponding interface for down direction. 0 if no interface available or no information about interface available." DEFVAL { 0 } ::= { bacPropertyStatusEntry 5 } --------------------------------------------------------------------------- -- bacEntityRelationTable --------------------------------------------------------------------------- bacEntityRelationTable OBJECT-TYPE SYNTAX SEQUENCE OF BacEntityRelationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of relation entries between BAC properties and voip entities. The BAC properties are described as entries in bacPropertyTable. Entities are referenced by type and index." ::= { bacConf 3 } bacEntityRelationEntry OBJECT-TYPE SYNTAX BacEntityRelationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacEntityRelationTable." INDEX { bacEntityRelationIndex } ::= { bacEntityRelationTable 1 } BacEntityRelationEntry ::= SEQUENCE { bacEntityRelationIndex INTEGER, bacEntityRelationPropertyIndex INTEGER, bacEntityRelationEntityType INTEGER, bacEntityRelationEntityIndex INTEGER, bacEntityRelationAdminStatus INTEGER } bacEntityRelationIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index in this entity relation table." ::= { bacEntityRelationEntry 1 } bacEntityRelationPropertyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of entry in bacPropertyTable to be referenced." ::= { bacEntityRelationEntry 2 } bacEntityRelationEntityType OBJECT-TYPE SYNTAX INTEGER { provider(1), extension(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of entity. provider(1) The entity is a provider extension(2) The entity is an extension" DEFVAL { provider } ::= { bacEntityRelationEntry 3 } bacEntityRelationEntityIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index in corresponding entity table. Depending on the used product different entities are addressed: bacEntityRelationEntityType provider: voipProviderTable or mpsTrunkGroupTable bacEntityRelationEntityType extension: voipExtensionTable or mpsTerminalTable" ::= { bacEntityRelationEntry 4 } bacEntityRelationAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If the AdminStatus is set to enabled(1) this entry will be used, if set to disabled(2) it won't be used. You may also delete this entry by changing it to delete(3)." DEFVAL { enabled } ::= { bacEntityRelationEntry 5 } --------------------------------------------------------------------------- -- bacInterfaceRelationTable --------------------------------------------------------------------------- bacInterfaceRelationTable OBJECT-TYPE SYNTAX SEQUENCE OF BacInterfaceRelationTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of relation entries between BAC properties and interfaces. The BAC properties are described as entries in bacPropertyTable. Entities are referenced by ifIndex." ::= { bacConf 4 } bacInterfaceRelationEntry OBJECT-TYPE SYNTAX BacInterfaceRelationTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacInterfaceRelationTable." INDEX { bacInterfaceRelationIndex } ::= { bacInterfaceRelationTable 1 } BacInterfaceRelationTable ::= SEQUENCE { bacInterfaceRelationIndex INTEGER, bacInterfaceRelationPropertyIndex INTEGER, bacInterfaceRelationIfIndex INTEGER, bacInterfaceRelationAdminStatus INTEGER } bacInterfaceRelationIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index in this interface relation table." ::= { bacInterfaceRelationEntry 1 } bacInterfaceRelationPropertyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of entry in bacPropertyTable to be referenced." ::= { bacInterfaceRelationEntry 2 } bacInterfaceRelationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Index of entry in ifTable to be referenced." ::= { bacInterfaceRelationEntry 3 } bacInterfaceRelationAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If AdminStatus is set to enabled(1) this entry will be used, if set to disabled(2) it won't be used. You may also delete this entry by changing it to delete(3)." DEFVAL { enabled } ::= { bacInterfaceRelationEntry 4 } --------------------------------------------------------------------------- -- bacAddressTable --------------------------------------------------------------------------- bacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF BacAddressTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP address ranges or address names belonging to BAC properties. The BAC properties are described as entries in bacPropertyTable. The IP address ranges are defines by address and netmask." ::= { bacConf 5 } bacAddressEntry OBJECT-TYPE SYNTAX BacAddressTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacAddressTable." INDEX { bacAddressIndex } ::= { bacAddressTable 1 } BacAddressTable ::= SEQUENCE { bacAddressIndex INTEGER, bacAddressPropertyIndex INTEGER, bacAddressIpAddress IpAddress, bacAddressIpNetmask IpAddress, bacAddressDomain DisplayString, bacAddressAdminStatus INTEGER } bacAddressIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index in this IP address table." ::= { bacAddressEntry 1 } bacAddressPropertyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of entry in bacPropertyTable to be referenced." ::= { bacAddressEntry 2 } bacAddressIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address defining the IP address range." ::= { bacAddressEntry 3 } bacAddressIpNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The netmask defining the IP address range." DEFVAL { 'FFFFFFFF'H } ::= { bacAddressEntry 4 } bacAddressDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The domain name defining the address. If empty bacAddressIpAddress and bacAddressIpNetmask is used." DEFVAL { "" } ::= { bacAddressEntry 5 } bacAddressAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If the AdminStatus is set to enabled(1) this entry will be used, if set to disabled(2) it won't be used. You may also delete this entry by changing it to delete(3)." DEFVAL { enabled } ::= { bacAddressEntry 6 } --------------------------------------------------------------------------- -- bacAudioCodecPropertyTable --------------------------------------------------------------------------- bacAudioCodecPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF BacAudioCodecPropertyTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of audio codec property entries." ::= { bacConf 6 } bacAudioCodecPropertyEntry OBJECT-TYPE SYNTAX BacAudioCodecPropertyTable MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry in bacAudioCodecPropertyTable." INDEX { bacAudioCodecPropertyIndex } ::= { bacAudioCodecPropertyTable 1 } BacAudioCodecPropertyTable ::= SEQUENCE { bacAudioCodecPropertyIndex INTEGER, bacAudioCodecPropertyDescr DisplayString, bacAudioCodecPropertyBandwidth INTEGER, bacAudioCodecPropertyFrameDuration INTEGER, bacAudioCodecPropertyFrameSize INTEGER, bacAudioCodecPropertyMosValue INTEGER } bacAudioCodecPropertyIndex OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The id of the codec and index in this property table." ::= { bacAudioCodecPropertyEntry 1 } bacAudioCodecPropertyDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The decription of this codec entry." ::= { bacAudioCodecPropertyEntry 2 } bacAudioCodecPropertyBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The required bandwidth in bits per seconds." ::= { bacAudioCodecPropertyEntry 3 } bacAudioCodecPropertyFrameDuration OBJECT-TYPE SYNTAX INTEGER UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of one frame in microseconds." -- The duration is choosen in microsends and not in millisonds -- because of codecs like LPC10: 22.5 ms = 225 us ::= { bacAudioCodecPropertyEntry 4 } bacAudioCodecPropertyFrameSize OBJECT-TYPE SYNTAX INTEGER UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of one frame in bits." -- The size is choosen in bits and not in bytes -- because of codecs like GSM: 32.5 bytes = 260 bits ::= { bacAudioCodecPropertyEntry 5 } bacAudioCodecPropertyMosValue OBJECT-TYPE SYNTAX INTEGER (100..500) MAX-ACCESS read-only STATUS current DESCRIPTION "The mean opinion score of this codec in hundredth. MOS specifies a numerical indication of the perceived audio quality. The following rating scheme exists: 1.00 Bad 2.00 Poor 3.00 Fair 4.00 Good 5.00 Excellent" ::= { bacAudioCodecPropertyEntry 6 } --------------------------------------------------------------------------- END