-- ZyXEL Communications Corporation -- Private Enterprise MIB definition -- This file describes the ZyXEL Communications Corporation Enterprise MIB. -- It contains ZyXEL products OIDs, and common managed objects. -- $Log: ZYXEL-IPV6-MIB.mib $ -- Revision 1.5 2013/12/06 07:06:08 ccho -- remove uncessary imports -- Revision 1.4 2013/11/06 05:41:31 ccho -- fix mib style -- Revision 1.3 2012/09/19 07:38:04 Kevin -- if it's leaf node, revise the vender name from zyxel to zy -- Revision 1.2 2012/07/05 06:23:07 Kevin -- 1. upgrade from SNMP to SNMPv2 -- 2. clean warning -- Revision 1.1 2012/05/30 07:49:39 Kevin -- Initial revision ZYXEL-IPV6-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM SNMPv2-SMI -- RFC2578 MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC -- RFC2579 EnabledStatus FROM P-BRIDGE-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC2851 esMgmt FROM ZYXEL-ES-SMI; zyxelIpv6 MODULE-IDENTITY LAST-UPDATED "201207010000Z" ORGANIZATION "Enterprise Solution ZyXEL" CONTACT-INFO "" DESCRIPTION "The subtree for Internet Protocol version 6 (IPv6)" ::= { esMgmt 34 } zyxelIpv6Setup OBJECT IDENTIFIER ::= { zyxelIpv6 1 } -- -- -- 34. zyxelIpv6 -- -- zyIpv6HopLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Enter the number of the IPv6 hop limit (from 1 to 255)." ::= { zyxelIpv6Setup 1 } zyIpv6IcmpRateLimitErrorInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Enter a value of error interval to control the sending rate of error messages, and the minimum accuracy is 10 milliseconds." ::= { zyxelIpv6Setup 2 } zyIpv6IcmpRateLimitBucketSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Enter a value of bucket size to control the number of ICMPv6 message allowed per error interval." ::= { zyxelIpv6Setup 3 } zyIpv6MaxNumberOfGlobalAddrresses OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of IPv6 Global Address entries that can be created." ::= { zyxelIpv6Setup 4 } -- zyxelIpv6Table zyxelIpv6Table OBJECT-TYPE SYNTAX SEQUENCE OF ZyxelIpv6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains IPv6 configuration." ::= { zyxelIpv6Setup 5 } zyxelIpv6Entry OBJECT-TYPE SYNTAX ZyxelIpv6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains IPv6 configuration. " INDEX { zyIpv6IfIndex } ::= { zyxelIpv6Table 1 } ZyxelIpv6Entry ::= SEQUENCE { zyIpv6IfIndex INTEGER, zyIpv6State EnabledStatus, zyIpv6AddressAutoConfigState EnabledStatus, zyIpv6LinkLocalIpAddrressType InetAddressType, zyIpv6LinkLocalIpAddrress InetAddress, zyIpv6DefaultGatewayType InetAddressType, zyIpv6DefaultGateway InetAddress } zyIpv6IfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of IPv6 Interface." ::= { zyxelIpv6Entry 1 } zyIpv6State OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable IPv6 on the interface." ::= { zyxelIpv6Entry 2 } zyIpv6AddressAutoConfigState OBJECT-TYPE SYNTAX EnabledStatus{ stateless(1), stateful(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable stateless address auto-configuration." ::= { zyxelIpv6Entry 3 } zyIpv6LinkLocalIpAddrressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This type of the link local address." ::= { zyxelIpv6Entry 4 } zyIpv6LinkLocalIpAddrress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 link local address. Each interface has only one IPv6 link local address." ::= { zyxelIpv6Entry 5 } zyIpv6DefaultGatewayType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This type of default gateway address." ::= { zyxelIpv6Entry 6 } zyIpv6DefaultGateway OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 default gateway." ::= { zyxelIpv6Entry 7 } -- zyxelIpv6GlobalAddressTable zyxelIpv6GlobalAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF ZyxelIpv6GlobalAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains IPv6 global address configuration. " ::= { zyxelIpv6Setup 6 } zyxelIpv6GlobalAddressEntry OBJECT-TYPE SYNTAX ZyxelIpv6GlobalAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains IPv6 global address configuration. " INDEX { zyIpv6GlobalAddressIfIndex, zyIpv6GlobalAddressIpAddressType, zyIpv6GlobalAddressIpAddress, zyIpv6GlobalAddressPrefixLength, zyIpv6GlobalAddressEUI64State } ::= { zyxelIpv6GlobalAddressTable 1 } ZyxelIpv6GlobalAddressEntry ::= SEQUENCE { zyIpv6GlobalAddressIfIndex INTEGER, zyIpv6GlobalAddressIpAddressType InetAddressType, zyIpv6GlobalAddressIpAddress InetAddress, zyIpv6GlobalAddressPrefixLength INTEGER, zyIpv6GlobalAddressEUI64State EnabledStatus, zyIpv6GlobalAddressStatus INTEGER, zyIpv6GlobalAddressRowStatus RowStatus } zyIpv6GlobalAddressIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of IPv6 global address interface." ::= { zyxelIpv6GlobalAddressEntry 1 } zyIpv6GlobalAddressIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of IPv6 global address." ::= { zyxelIpv6GlobalAddressEntry 2 } zyIpv6GlobalAddressIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 global address. Each interface can be multiple IPv6 global addresses." ::= { zyxelIpv6GlobalAddressEntry 3 } zyIpv6GlobalAddressPrefixLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 global address prefix length." ::= { zyxelIpv6GlobalAddressEntry 4 } zyIpv6GlobalAddressEUI64State OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enable/Disable EUI-64 and enable it will replace the IPv6 address from the post-64 bit to EUI-64 MAC address." ::= { zyxelIpv6GlobalAddressEntry 5 } zyIpv6GlobalAddressStatus OBJECT-TYPE SYNTAX INTEGER{ preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of IPv6 global address." ::= { zyxelIpv6GlobalAddressEntry 6 } zyIpv6GlobalAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entry to be created and deleted an IPv6 global address entry." ::= { zyxelIpv6GlobalAddressEntry 7 } END