-- -- phyDs1.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285 -- Monday, November 02, 2009 at 16:15:28 -- ZHONE-Wan-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex, ifAlias, InterfaceIndex FROM IF-MIB PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TimeStamp, TruthValue FROM SNMPv2-TC zhoneDsx FROM Zhone ZhoneAdminString FROM Zhone-TC; -- To Create generated mib handler: -- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp rfc1907.mib iftype.mib rfc2233.mib rfc2493.mib Zhone.mib Zhone-TC.mib -stub -o ds1MibHdlr.c phyDs1.mib -- To create generated protection layer: -- /vob/zhonetools/bin/pahrser.pl rfc1907.mib iftype.mib rfc2233.mib rfc2493.mib Zhone.mib Zhone-TC.mib phyDs1.mib -- -- -- -- -- -- -- -- -- -- -- -- 1.3.6.1.4.1.5504.5.2.1 zhoneDs1Mib MODULE-IDENTITY LAST-UPDATED "200905120738Z" -- May 12, 2009 at 07:38 GMT ORGANIZATION "Zhone Technologies." CONTACT-INFO " Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "The zhone WAN MIB for configuration of the line. This mib handles CSU and DSX mode." REVISION "200907231115Z" -- July 23, 2009 at 11:15 GMT DESCRIPTION "Added zhoneDs1BertTable." REVISION "200905120738Z" -- May 12, 2009 at 07:38 GMT DESCRIPTION "Obsoleted zhoneDs1TxClockRecovery, functionality moved to ZHONE-CARD-RESOURCES-MIB object cardPweTrafficMode." REVISION "200811100858Z" -- November 10, 2008 at 08:58 GMT DESCRIPTION "Added zhoneDs1TxClockRecovery and zhoneDs1TxClockAdaptiveQuality for PWE timing." REVISION "200605121246Z" -- May 12, 2006 at 12:46 GMT DESCRIPTION "Added Timeslot Assignment" REVISION "200402051147Z" -- February 05, 2004 at 11:47 GMT DESCRIPTION "V01.01.10 - Add ds1LinePower." REVISION "200401211536Z" -- January 21, 2004 at 15:36 GMT DESCRIPTION "V01.01.09 - Added DS1 Group Index to ds1 profile" REVISION "200305151315Z" -- May 15, 2003 at 13:15 GMT DESCRIPTION "V01.01.08 added ifAlias to the OBJECTS clause for zhoneLineStatusChange trap." REVISION "200302041312Z" -- February 04, 2003 at 13:12 GMT DESCRIPTION "V01.01.07 added zhoneDs1ProtocolEmulation & zhoneDs1SignalType " REVISION "200110221004Z" -- October 22, 2001 at 10:04 GMT DESCRIPTION "V01.01.07 Updated description for zhoneClockSourceEligibility" REVISION "200108221350Z" -- August 22, 2001 at 13:50 GMT DESCRIPTION "V01.01.06 Added Coset Polynomial as a part a ds1_profile" REVISION "200108141624Z" -- August 14, 2001 at 16:24 GMT DESCRIPTION "V01.01.05 Added Cell Scrambling as a part a ds1_profile" REVISION "200108091007Z" -- August 09, 2001 at 10:07 GMT DESCRIPTION "V01.01.04 Add unframed ds1/e1 options into zhoneLineType this is required by DS1/E1 ATM Trunk card" REVISION "200101181328Z" -- January 18, 2001 at 13:28 GMT DESCRIPTION "V01.01.03 Changes to the DS1 transmit clock source" REVISION "200101041119Z" -- January 04, 2001 at 11:19 GMT DESCRIPTION "V01.01.02 Add comments for supported fields in this release. Added sendCode types for E1 to MIB definition. Statistics and far end information is not supported in this release." REVISION "200011131130Z" -- November 13, 2000 at 11:30 GMT DESCRIPTION "V01.01.01 Description for Payloadloop corrected" REVISION "200009211027Z" -- September 21, 2000 at 10:27 GMT DESCRIPTION "V01.01.00 Ds1Trap Prefix corrected" REVISION "200009121359Z" -- September 12, 2000 at 13:59 GMT DESCRIPTION "V01.00.00 Initial Release" ::= { zhoneDsx 1 } -- -- Node definitions -- -- 1.3.6.1.4.1.5504.5.2.2 zhoneDs1Table OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Configuration table. Statistical information not supported on BAN in this release." ::= { zhoneDsx 2 } -- 1.3.6.1.4.1.5504.5.2.2.1 zhoneDs1Entry OBJECT-TYPE SYNTAX ZhoneDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Configuration table." INDEX { zhoneLineIndex } ::= { zhoneDs1Table 1 } ZhoneDs1Entry ::= SEQUENCE { zhoneLineIndex InterfaceIndex, zhoneTimeElapsed INTEGER, zhoneValidIntervals INTEGER, zhoneLineType INTEGER, zhoneLineCoding INTEGER, zhoneSendCode INTEGER, zhoneCircuitIdentifier ZhoneAdminString, zhoneLoopbackConfig INTEGER, zhoneLineStatus INTEGER, zhoneSignalMode INTEGER, zhoneTransmitClockSource INTEGER, zhoneFdl INTEGER, zhoneInvalidIntervals INTEGER, zhoneDsxLineLength INTEGER, zhoneLineStatusLastChange TimeStamp, zhoneLineStatusChangeTrapEnable INTEGER, zhoneLoopbackStatus INTEGER, zhoneDs1ChannelNumber INTEGER, zhoneChannelization INTEGER, zhoneDs1Mode INTEGER, zhoneCsuLineLength INTEGER, zhoneClockSourceEligibility INTEGER, zhoneCellScramble TruthValue, zhoneCosetPolynomial TruthValue, zhoneDs1ProtocolEmulation INTEGER, zhoneDs1SignalType INTEGER, zhoneDs1GroupIndex INTEGER, zhoneDs1LinePower INTEGER, zhoneDs1TimeslotAssignment BITS, zhoneDs1TxClockRecovery INTEGER, zhoneDs1TxClockAdaptiveQuality INTEGER } -- 1.3.6.1.4.1.5504.5.2.2.1.1 zhoneLineIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object should be made equal to ifIndex. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs." ::= { zhoneDs1Entry 1 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.2 zhoneTimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { zhoneDs1Entry 2 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.3 zhoneValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The numberof previous near end intervals for which data was collected. The value will be 96 unless the interface was brouht online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been oline. In the case where the agent is a proxxy, it is possible that some intervals are unavailable. In this case, the interval is the maximum interval number for which data is available. " ::= { zhoneDs1Entry 3 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.4 zhoneLineType OBJECT-TYPE SYNTAX INTEGER { other(1), esf(2), d4(3), slc96(4), e1(5), e1Crc(6), e1Mf(7), e1CrcMf(8), e1Unframed(9), ds1Unframed(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: other(1) (not supported in this release) esf(2) Extended SuperFrame DS1 (T1.107) d4(3) AT&T D4 format DS1 (T1.107) slc96(4) (not supported in this release) e1(5) ITU-T Recommendation G.704 (not supported in this release) e1Crc(6) ITU-T Recommendation G.704 (not supported in this release) e1Mf(7) G.704 multiframing enabled e1CrcMf(8) G.704 multiframing enabled and crc enabled e1Unframed(9) E1 with no framing ds1Unframed(10) Ds1 with no framing For clarification, the capacity for each E1 type is as listed below: e1 or e1Crc - e1, with framing, no signalling = 31 x 64k = 1984k e1Mf or e1CrcMf - e1, with framing, signalling = 30 x 64k = 1920k For further information See ITU-T Recomm G.704 Default is set to esf for T1 platforms and e1CrcMf for E1 platforms. BAN E1: esf,d4 T1:e1,e1mf,e1crcmf" ::= { zhoneDs1Entry 4 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.5 zhoneLineCoding OBJECT-TYPE SYNTAX INTEGER { jbzs(1), b8zs(2), hdb3(3), zbtsi(4), ami(5), other(6), b6zs(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. jbzs refers the Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8 bit periods is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per channel, or 1.344 Mbps, is available for data. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use zbtsi, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use hdb3 or ami. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data. b6zs refers to the user of a specifed pattern of normal bits and bipolar violations which are used to replace a sequence of six zero bits. Used for DS2. Default is set to b8zs for T1 platforms and hdb3 for E1. TITLE: AVAILABILITY: jbzs(1) (not supported in this release) b8zs(2) (not supported for e1 lineTypes) hdb3(3) (supported for e1 lineTypes) zbtsi(4) (not supported in this release) ami(5) other(6) (not supported in this release) b6zs(7) (not supported in this rele BAN E1: hdb3,ami; T1: b8zs,ami" ::= { zhoneDs1Entry 5 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.6 zhoneSendCode OBJECT-TYPE SYNTAX INTEGER { sendNoCode(1), sendLineCode(2), sendPayloadCode(3), sendResetCode(4), sendQRSSPattern(5), send511Pattern(6), send3in24Pattern(7), sendOtherTestPattern(8), send2047Pattern(9), send1in2Pattern(10), sendInbandCode(11), sendInbandCodeOff(12), sendLineCodeOff(13), sendPayloadCodeOff(14), send2ToPower9Minus1Pattern(15), send2ToPower11Minus1Pattern(16), send2ToPower15Minus1Pattern(17), send2ToPower20Minus1Pattern(18), send2ToPower23Minus1Pattern(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: SendNoCode sending looped or normal data sendLineCode sending a request for a line loopback T1 related sendCodes ------------------------------------------ sendPayloadCode sending a request for a payload loopback sendResetCode sending a loopback termination request sendQRSSPattern sending a Quasi-Random Signal (QRS) test pattern send511Pattern sending a 511 bit fixed test pattern send3in24Pattern sending a fixed test pattern of 3 bits set in 24 sendOtherTestPattern sending a test pattern other than those described by this object send2047Pattern, sending 2047 test pattern. send1in2Pattern, sending alternate one , zero pattern. sendInbandCode, sending inband loopback command. sendInbandCodeOff, sending inband loopback off command. sendLineCodeOff, sending line loopback command. sendPayloadCodeOff, sending payload loopback command. E1 related send codes ------------------------------------------ send2ToPower9Minus1Pattern refer to O.153 send2ToPower11Minus1Pattern refer to O.152 and O.153 send2ToPower15Minus1Pattern refer to O.151 send2ToPower20Minus1Pattern refer to O.153 QRSS bit = 1 send2ToPower23Minus1Pattern refer to O.151 Only sendNoCode is supported on E1 platforms in this release. N/A for BAN " DEFVAL { sendNoCode } ::= { zhoneDs1Entry 6 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.7 zhoneCircuitIdentifier OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { zhoneDs1Entry 7 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.8 zhoneLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), lineLoop(2), localLoop(3), payloadLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. localLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. " DEFVAL { noLoop } ::= { zhoneDs1Entry 8 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.9 zhoneLineStatus OBJECT-TYPE SYNTAX INTEGER (1..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. If the zhloopbackState bit is set, the loopback in effect can be determined from the loopbackConfig object. The various bit positions are: noAlarm(1) No alarm present rcvFarEndLOF(2) Far end LOF (a.k.a., Yellow Alarm) xmtFarEndLOF(4) Near end sending LOF Indication rcvAIS(8) Far end sending AIS xmtAIS(16) Near end sending AIS lossOfFrame(32 Near end LOF (a.k.a., Red Alarm) lossOfSignal(64) Near end Loss Of Signal loopbackState(128) Near end is looped ts16AIS(256) E1 TS16 AIS rcvFarEndLOMF(512) Far End Sending TS16 LOMF xmtFarEndLOMF(1024) Near End Sending TS16 LOMF rcvTestCode(2048) Near End detects a test code otherFailure(4096) any line status not defined here unavailSigState(8192) Near End in Unavailable Signal State netEquipOOS(16384) Carrier Equipment Out of Service " ::= { zhoneDs1Entry 9 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.10 zhoneSignalMode OBJECT-TYPE SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3), messageOriented(4), other(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a DS1. Default is set to robbedBit for T1 platforms and messageOriented for E1. TITLE: AVAILABILITY: none(1) robbedBit(2) (not supported for E1 lineTypes) bitOriented(3) (only supported for E1 lineTypes) messageOriented(4) has the same effect as none other(5) (not supported in this release) N/A For BAN" ::= { zhoneDs1Entry 10 } -- 1.3.6.1.4.1.5504.5.2.2.1.11 zhoneTransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), throughTiming(3), sonetThroughTiming(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reflects the source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. Only set if this DS1 has zhoneClockSourceEligibility equal to 'eligible' and the state of that ds1 is 'up' and the ds1 resource provider decided this DS1 is to provide the transmit clock for all the DS1s. Only one DS1 will have this set per platform. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock. Example: If a DS1 other than this one reflects 'loopTiming', this DS1 will use that DS1 as its transmit clock. Therefore this DS1 reflects 'throughTiming'. 'sonetThroughTiming' indecates that recovered receive clock from the far-side sonet node is used as the transmit clock." DEFVAL { throughTiming } ::= { zhoneDs1Entry 11 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.12 zhoneFdl OBJECT-TYPE SYNTAX INTEGER { other(1), ansiT1403(2), att54016(3), fdlNone(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 'other' indicates that a protocol other than one following is used. 'ansiT1403' refers to the FDL exchange recommended by ANSI. 'att54016' refers to ESF FDL exchanges. 'fdlNone' indicates that the device does not use the FDL. TITLE: AVAILABILITY: other(1) (not supported in this release) ansiT1403(2) (not supported in this release) att54016(3) (not supported in this release) fdlNone(4) " DEFVAL { fdlNone } ::= { zhoneDs1Entry 12 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.13 zhoneInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to zwValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { zhoneDs1Entry 13 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.14 zhoneDsxLineLength OBJECT-TYPE SYNTAX INTEGER { dsx0(1), dsx133(2), dsx266(3), dsx399(4), dsx533(5), dsx655(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The length of the dsx wan is in feets. This objects provides information for line build out circuitry. The valid range is: 'dsx0(1)' It is 0 feet for the line build out (LBO) and the default setting. 'dsx133(2)'It is 133 feets for the LBO. 'dsx266(3)'It is 266 feets for the LBO. 'dsx399(4)'It is 399 feets for the LBO. 'dsx533(5)'It is 533 feets for the LBO. 'dsx655(6)'It is 655 feets for the LBO. This field is not used for E1 platforms. " DEFVAL { dsx0 } ::= { zhoneDs1Entry 14 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.15 zhoneLineStatusLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value." ::= { zhoneDs1Entry 15 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.16 zhoneLineStatusChangeTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether zhoneLineStatusChange traps should be generated for this interface. " DEFVAL { disabled } ::= { zhoneDs1Entry 16 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.17 zhoneLoopbackStatus OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a local manager and remotely from the far end. This status is combination of loopbackConfig, and sendCode options as this status represents the local as well as far loopbacks. The various positions are: noLoopback(1) nearEndLineLoopback(2) nearEndOtherLoopback(4) nearEndLocalLoopback(8) farEndPayloadLoopback(16) farEndLineLoopback(32)" ::= { zhoneDs1Entry 17 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.18 zhoneDs1ChannelNumber OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3." ::= { zhoneDs1Entry 18 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.19 zhoneChannelization OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabledDs0(2), enabledDs1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabledDs1 indicated that this is a DS2 channelized into DS1s. Setting this value will cause the creation or deletion of entries in the ifTable for the DS0s that are within the DS1. TITLE: AVAILABILITY: disabled(1) (not supported in this release) enabledDs0(2) enabledDs1(3) (not supported in this release) For BAN disabled" DEFVAL { enabledDs0 } ::= { zhoneDs1Entry 19 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.20 zhoneDs1Mode OBJECT-TYPE SYNTAX INTEGER { other(1), dsx(2), csu(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "'other' wan is not in csu or dsx mode. 'dsx' T1 wan is in dsx mode. 'csu' T1 wan is in csu mode. Default setting is 'csu' for T1 platforms and 'other' for E1. TITLE: AVAILABILITY: other(1) dsx(2) csu(3) BAN E1:other; T1:csu,dsx" ::= { zhoneDs1Entry 20 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.21 zhoneCsuLineLength OBJECT-TYPE SYNTAX INTEGER { csu00(1), csu75(2), csu150(3), csu225(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 'csu00' it is 0 dB for csu ds1 wan for line build out. 'csu75' it is -7.5 dB for line build out. 'csu150' it is -15.0 dB for line build out. 'csu225' it is -22.5 dB for line build out (LBO). This field is not used for E1 platforms." DEFVAL { csu00 } ::= { zhoneDs1Entry 21 } -- -- 1.3.6.1.4.1.5504.5.2.2.1.22 zhoneClockSourceEligibility OBJECT-TYPE SYNTAX INTEGER { notEligible(1), eligible(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The possible values are: (1) not-eligibile - this DS1 is not eligible to be negotiated as a possible transmit clock source (2) eligible - this DS1 may be used by the DS1 Line resource provider in negotiation as a possible transmit clock source for all DS1s. For BAN DS1, this field is not writeable and will default to eligible. " DEFVAL { notEligible } ::= { zhoneDs1Entry 22 } -- 1.3.6.1.4.1.5504.5.2.2.1.23 zhoneCellScramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field describes the enabled status of the Ds1 Cell Scramble mode. If this field is true(1) then Scramble mode is enabled, if this field is false(2) scramble mode is disable.." DEFVAL { true } ::= { zhoneDs1Entry 23 } -- 1.3.6.1.4.1.5504.5.2.2.1.24 zhoneCosetPolynomial OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field describes the enabled status of the Coset Polynomial mode. If this field is true(1) then Coset Polynomial mode is enabled, if this field is false(2) Coset Polynomial mode is disable." ::= { zhoneDs1Entry 24 } -- 1.3.6.1.4.1.5504.5.2.2.1.25 zhoneDs1ProtocolEmulation OBJECT-TYPE SYNTAX INTEGER { network(1), cpe(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the device is acting as Network-side or CPE with respect to this DS1. For example, if the system is configured with a PBX on the network side of the device, then the device will act as a CPE with respect to the DS1. If the device is on the network side of a PBX, then this leaf should be set to network, as the PBX would be acting as a CPE." DEFVAL { network } ::= { zhoneDs1Entry 25 } -- 1.3.6.1.4.1.5504.5.2.2.1.26 zhoneDs1SignalType OBJECT-TYPE SYNTAX INTEGER { loopStart(1), groundStart(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The signaling type of the FXS interfaces within this DS1." DEFVAL { loopStart } ::= { zhoneDs1Entry 26 } -- 1.3.6.1.4.1.5504.5.2.2.1.27 zhoneDs1GroupIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The Group index this Ds1 belongs to" ::= { zhoneDs1Entry 27 } -- 1.3.6.1.4.1.5504.5.2.2.1.28 zhoneDs1LinePower OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable line power for the DS1 interface." DEFVAL { disabled } ::= { zhoneDs1Entry 28 } -- 1.3.6.1.4.1.5504.5.2.2.1.29 zhoneDs1TimeslotAssignment OBJECT-TYPE SYNTAX BITS { ts0(0), ts1(1), ts2(2), ts3(3), ts4(4), ts5(5), ts6(6), ts7(7), ts8(8), ts9(9), ts10(10), ts11(11), ts12(12), ts13(13), ts14(14), ts15(15), ts16(16), ts17(17), ts18(18), ts19(19), ts20(20), ts21(21), ts22(22), ts23(23), ts24(24), ts25(25), ts26(26), ts27(27), ts28(28), ts29(29), ts30(30), ts31(31) } MAX-ACCESS read-write STATUS current DESCRIPTION "This table entry is a bit field indicating which timeslots in a ds1 are used (or assigned). Default for DS1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+0+0+0+0+0+0+0+0 Default for E1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+0." ::= { zhoneDs1Entry 29 } -- 1.3.6.1.4.1.5504.5.2.2.1.30 zhoneDs1TxClockRecovery OBJECT-TYPE SYNTAX INTEGER { none(1), adaptive(2), differential(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "PWE transmit clock recovery method" DEFVAL { none } ::= { zhoneDs1Entry 30 } -- 1.3.6.1.4.1.5504.5.2.2.1.31 zhoneDs1TxClockAdaptiveQuality OBJECT-TYPE SYNTAX INTEGER { stratum1(1), stratum3(2), stratum3e(3), stratum4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines sync drift when operating in PWE adaptive mode. Values reflect ANSI Standard T1.101 reference clock quality." DEFVAL { stratum3 } ::= { zhoneDs1Entry 31 } -- 1.3.6.1.4.1.5504.5.2.3 zhoneDs1CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1CurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 current table contains various statistics being collected for the current 15 minute interval. Not supported on BAN in this release." ::= { zhoneDsx 3 } -- 1.3.6.1.4.1.5504.5.2.3.1 zhoneDs1CurrentEntry OBJECT-TYPE SYNTAX ZhoneDs1CurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Current table." INDEX { zhoneCurrentIndex } ::= { zhoneDs1CurrentTable 1 } ZhoneDs1CurrentEntry ::= SEQUENCE { zhoneCurrentIndex InterfaceIndex, zhoneCurrentESs PerfCurrentCount, zhoneCurrentSESs PerfCurrentCount, zhoneCurrentSEFSs PerfCurrentCount, zhoneCurrentUASs PerfCurrentCount, zhoneCurrentCSSs PerfCurrentCount, zhoneCurrentPCVs PerfCurrentCount, zhoneCurrentLESs PerfCurrentCount, zhoneCurrentBESs PerfCurrentCount, zhoneCurrentDMs PerfCurrentCount, zhoneCurrentLCVs PerfCurrentCount } -- 1.3.6.1.4.1.5504.5.2.3.1.1 zhoneCurrentIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance." ::= { zhoneDs1CurrentEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.2 zhoneCurrentESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds." ::= { zhoneDs1CurrentEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.3 zhoneCurrentSESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds." ::= { zhoneDs1CurrentEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.4 zhoneCurrentSEFSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds." ::= { zhoneDs1CurrentEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.5 zhoneCurrentUASs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds." ::= { zhoneDs1CurrentEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.6 zhoneCurrentCSSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds." ::= { zhoneDs1CurrentEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.7 zhoneCurrentPCVs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations." ::= { zhoneDs1CurrentEntry 7 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.8 zhoneCurrentLESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds." ::= { zhoneDs1CurrentEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.9 zhoneCurrentBESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds." ::= { zhoneDs1CurrentEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.10 zhoneCurrentDMs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes." ::= { zhoneDs1CurrentEntry 10 } -- -- 1.3.6.1.4.1.5504.5.2.3.1.11 zhoneCurrentLCVs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Code Violations (LCVs)." ::= { zhoneDs1CurrentEntry 11 } -- 1.3.6.1.4.1.5504.5.2.4 zhoneDs1IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1IntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by zwIntervalNumber) for one specific instance (identified by zwIntervalIndex). Not supported on BAN in this release." ::= { zhoneDsx 4 } -- 1.3.6.1.4.1.5504.5.2.4.1 zhoneDs1IntervalEntry OBJECT-TYPE SYNTAX ZhoneDs1IntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Interval table." INDEX { zhoneIntervalIndex, zhoneIntervalNumber } ::= { zhoneDs1IntervalTable 1 } ZhoneDs1IntervalEntry ::= SEQUENCE { zhoneIntervalIndex InterfaceIndex, zhoneIntervalNumber INTEGER, zhoneIntervalESs PerfIntervalCount, zhoneIntervalSESs PerfIntervalCount, zhoneIntervalSEFSs PerfIntervalCount, zhoneIntervalUASs PerfIntervalCount, zhoneIntervalCSSs PerfIntervalCount, zhoneIntervalPCVs PerfIntervalCount, zhoneIntervalLESs PerfIntervalCount, zhoneIntervalBESs PerfIntervalCount, zhoneIntervalDMs PerfIntervalCount, zhoneIntervalLCVs PerfIntervalCount, zhoneIntervalValidData TruthValue } -- -- -- 1.3.6.1.4.1.5504.5.2.4.1.1 zhoneIntervalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance." ::= { zhoneDs1IntervalEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.2 zhoneIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1." ::= { zhoneDs1IntervalEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.3 zhoneIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds." ::= { zhoneDs1IntervalEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.4 zhoneIntervalSESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds." ::= { zhoneDs1IntervalEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.5 zhoneIntervalSEFSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds." ::= { zhoneDs1IntervalEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.6 zhoneIntervalUASs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary." ::= { zhoneDs1IntervalEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.7 zhoneIntervalCSSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds." ::= { zhoneDs1IntervalEntry 7 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.8 zhoneIntervalPCVs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations." ::= { zhoneDs1IntervalEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.9 zhoneIntervalLESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds." ::= { zhoneDs1IntervalEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.10 zhoneIntervalBESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds." ::= { zhoneDs1IntervalEntry 10 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.11 zhoneIntervalDMs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes." ::= { zhoneDs1IntervalEntry 11 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.12 zhoneIntervalLCVs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Code Violations." ::= { zhoneDs1IntervalEntry 12 } -- -- 1.3.6.1.4.1.5504.5.2.4.1.13 zhoneIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { zhoneDs1IntervalEntry 13 } -- 1.3.6.1.4.1.5504.5.2.5 zhoneDs1TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1TotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported on BAN in this release." ::= { zhoneDsx 5 } -- 1.3.6.1.4.1.5504.5.2.5.1 zhoneDs1TotalEntry OBJECT-TYPE SYNTAX ZhoneDs1TotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Total table." INDEX { zhoneTotalIndex } ::= { zhoneDs1TotalTable 1 } ZhoneDs1TotalEntry ::= SEQUENCE { zhoneTotalIndex InterfaceIndex, zhoneTotalESs PerfTotalCount, zhoneTotalSESs PerfTotalCount, zhoneTotalSEFSs PerfTotalCount, zhoneTotalUASs PerfTotalCount, zhoneTotalCSSs PerfTotalCount, zhoneTotalPCVs PerfTotalCount, zhoneTotalLESs PerfTotalCount, zhoneTotalBESs PerfTotalCount, zhoneTotalDMs PerfTotalCount, zhoneTotalLCVs PerfTotalCount } -- 1.3.6.1.4.1.5504.5.2.5.1.1 zhoneTotalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance." ::= { zhoneDs1TotalEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.2 zhoneTotalESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.3 zhoneTotalSESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.4 zhoneTotalSEFSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.5 zhoneTotalUASs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.6 zhoneTotalCSSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.7 zhoneTotalPCVs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 7 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.8 zhoneTotalLESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.9 zhoneTotalBESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.5.1.10 zhoneTotalDMs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 10 } -- 1.3.6.1.4.1.5504.5.2.5.1.11 zhoneTotalLCVs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1TotalEntry 11 } -- 1.3.6.1.4.1.5504.5.2.6 zhoneDs1FarEndCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1FarEndCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end messages on the Facilities Data Link. The definitions are the same as described for the near-end information. Not supported in this release." ::= { zhoneDsx 6 } -- 1.3.6.1.4.1.5504.5.2.6.1 zhoneDs1FarEndCurrentEntry OBJECT-TYPE SYNTAX ZhoneDs1FarEndCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Far End Current table." INDEX { zhoneFarEndCurrentIndex } ::= { zhoneDs1FarEndCurrentTable 1 } ZhoneDs1FarEndCurrentEntry ::= SEQUENCE { zhoneFarEndCurrentIndex InterfaceIndex, zhoneFarEndTimeElapsed INTEGER, zhoneFarEndValidIntervals INTEGER, zhoneFarEndCurrentESs PerfCurrentCount, zhoneFarEndCurrentSESs PerfCurrentCount, zhoneFarEndCurrentSEFSs PerfCurrentCount, zhoneFarEndCurrentUASs PerfCurrentCount, zhoneFarEndCurrentCSSs PerfCurrentCount, zhoneFarEndCurrentLESs PerfCurrentCount, zhoneFarEndCurrentPCVs PerfCurrentCount, zhoneFarEndCurrentBESs PerfCurrentCount, zhoneFarEndCurrentDMs PerfCurrentCount, zhoneFarEndInvalidIntervals INTEGER } -- 1.3.6.1.4.1.5504.5.2.6.1.1 zhoneFarEndCurrentIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex." ::= { zhoneDs1FarEndCurrentEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.2 zhoneFarEndTimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { zhoneDs1FarEndCurrentEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.3 zhoneFarEndValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online." ::= { zhoneDs1FarEndCurrentEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.4 zhoneFarEndCurrentESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Errored Seconds." ::= { zhoneDs1FarEndCurrentEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.5 zhoneFarEndCurrentSESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Seconds." ::= { zhoneDs1FarEndCurrentEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.6 zhoneFarEndCurrentSEFSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Framing Seconds." ::= { zhoneDs1FarEndCurrentEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.7 zhoneFarEndCurrentUASs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds." ::= { zhoneDs1FarEndCurrentEntry 7 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.8 zhoneFarEndCurrentCSSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Controlled Slip Seconds." ::= { zhoneDs1FarEndCurrentEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.9 zhoneFarEndCurrentLESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Line Errored Seconds." ::= { zhoneDs1FarEndCurrentEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.10 zhoneFarEndCurrentPCVs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Path Coding Violations." ::= { zhoneDs1FarEndCurrentEntry 10 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.11 zhoneFarEndCurrentBESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Bursty Errored Seconds." ::= { zhoneDs1FarEndCurrentEntry 11 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.12 zhoneFarEndCurrentDMs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Degraded Minutes." ::= { zhoneDs1FarEndCurrentEntry 12 } -- -- 1.3.6.1.4.1.5504.5.2.6.1.13 zhoneFarEndInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to zhFarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { zhoneDs1FarEndCurrentEntry 13 } -- 1.3.6.1.4.1.5504.5.2.7 zhoneDs1FarEndIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1FarEndIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by zwFarEndIntervalNumber) for one specific instance (identified by zwFarEndIntervalIndex). Not supported in this release." ::= { zhoneDsx 7 } -- 1.3.6.1.4.1.5504.5.2.7.1 zhoneDs1FarEndIntervalEntry OBJECT-TYPE SYNTAX ZhoneDs1FarEndIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Far End Interval table." INDEX { zhoneFarEndIntervalIndex, zhoneFarEndIntervalNumber } ::= { zhoneDs1FarEndIntervalTable 1 } ZhoneDs1FarEndIntervalEntry ::= SEQUENCE { zhoneFarEndIntervalIndex InterfaceIndex, zhoneFarEndIntervalNumber INTEGER, zhoneFarEndIntervalESs PerfIntervalCount, zhoneFarEndIntervalSESs PerfIntervalCount, zhoneFarEndIntervalSEFSs PerfIntervalCount, zhoneFarEndIntervalUASs PerfIntervalCount, zhoneFarEndIntervalCSSs PerfIntervalCount, zhoneFarEndIntervalLESs PerfIntervalCount, zhoneFarEndIntervalPCVs PerfIntervalCount, zhoneFarEndIntervalBESs PerfIntervalCount, zhoneFarEndIntervalDMs PerfIntervalCount, zhoneFarEndIntervalValidData TruthValue } -- 1.3.6.1.4.1.5504.5.2.7.1.1 zhoneFarEndIntervalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex." ::= { zhoneDs1FarEndIntervalEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.2 zhoneFarEndIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1." ::= { zhoneDs1FarEndIntervalEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.3 zhoneFarEndIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Errored Seconds." ::= { zhoneDs1FarEndIntervalEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.4 zhoneFarEndIntervalSESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Seconds." ::= { zhoneDs1FarEndIntervalEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.5 zhoneFarEndIntervalSEFSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Framing Seconds." ::= { zhoneDs1FarEndIntervalEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.6 zhoneFarEndIntervalUASs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds." ::= { zhoneDs1FarEndIntervalEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.7 zhoneFarEndIntervalCSSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Controlled Slip Seconds." ::= { zhoneDs1FarEndIntervalEntry 7 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.8 zhoneFarEndIntervalLESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Line Errored Seconds." ::= { zhoneDs1FarEndIntervalEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.9 zhoneFarEndIntervalPCVs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Path Coding Violations." ::= { zhoneDs1FarEndIntervalEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.10 zhoneFarEndIntervalBESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Bursty Errored Seconds." ::= { zhoneDs1FarEndIntervalEntry 10 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.11 zhoneFarEndIntervalDMs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Degraded Minutes." ::= { zhoneDs1FarEndIntervalEntry 11 } -- -- 1.3.6.1.4.1.5504.5.2.7.1.12 zhoneFarEndIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { zhoneDs1FarEndIntervalEntry 12 } -- 1.3.6.1.4.1.5504.5.2.8 zhoneDs1FarEndTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1FarEndTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported in this release." ::= { zhoneDsx 8 } -- 1.3.6.1.4.1.5504.5.2.8.1 zhoneDs1FarEndTotalEntry OBJECT-TYPE SYNTAX ZhoneDs1FarEndTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Far End Total table." INDEX { zhoneFarEndTotalIndex } ::= { zhoneDs1FarEndTotalTable 1 } ZhoneDs1FarEndTotalEntry ::= SEQUENCE { zhoneFarEndTotalIndex InterfaceIndex, zhoneFarEndTotalESs PerfTotalCount, zhoneFarEndTotalSESs PerfTotalCount, zhoneFarEndTotalSEFSs PerfTotalCount, zhoneFarEndTotalUASs PerfTotalCount, zhoneFarEndTotalCSSs PerfTotalCount, zhoneFarEndTotalLESs PerfTotalCount, zhoneFarEndTotalPCVs PerfTotalCount, zhoneFarEndTotalBESs PerfTotalCount, zhoneFarEndTotalDMs PerfTotalCount } -- 1.3.6.1.4.1.5504.5.2.8.1.1 zhoneFarEndTotalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex." ::= { zhoneDs1FarEndTotalEntry 1 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.2 zhoneFarEndTotalESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 2 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.3 zhoneFarEndTotalSESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 3 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.4 zhoneFarEndTotalSEFSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 4 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.5 zhoneFarEndTotalUASs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 5 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.6 zhoneFarEndTotalCSSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 6 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.7 zhoneFarEndTotalLESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 7 } -- 1.3.6.1.4.1.5504.5.2.8.1.8 zhoneFarEndTotalPCVs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 8 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.9 zhoneFarEndTotalBESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 9 } -- -- 1.3.6.1.4.1.5504.5.2.8.1.10 zhoneFarEndTotalDMs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { zhoneDs1FarEndTotalEntry 10 } -- 1.3.6.1.4.1.5504.5.2.9 zhoneChanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneChanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map a DS2 channel number on a DS3 into an ifIndex, or used to map a DS1 channel number on a DS2 onto an ifIndex. Not supported in this release." ::= { zhoneDsx 9 } -- 1.3.6.1.4.1.5504.5.2.9.1 zhoneChanMappingEntry OBJECT-TYPE SYNTAX ZhoneChanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each ds1 ifEntry within any interface that is channelized to the individual ds1 ifEntry level. This table is intended to facilitate mapping from channelized interface / channel number to DS1 ifEntry. (e.g. mapping (DS3 ifIndex, DS1 Channel Number) -> ifIndex) While this table provides information that can also be found in the ifStackTable and zhoneWanTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the various constituent ds1 ifTable entries, and testing various zhoneWanTable entries to check for the entry with the applicable DS1 channel number." INDEX { ifIndex, zhoneDs1ChannelNumber } ::= { zhoneChanMappingTable 1 } ZhoneChanMappingEntry ::= SEQUENCE { zhoneChanMappedIfIndex InterfaceIndex } -- -- 1.3.6.1.4.1.5504.5.2.9.1.1 zhoneChanMappedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ifIndex value assigned by the agent for the individual ds1 ifEntry that corresponds to the given DS1 channel number (specified by the INDEX element zwDs1ChannelNumber) of the given channelized interface (specified by INDEX element ifIndex)." ::= { zhoneChanMappingEntry 1 } -- 1.3.6.1.4.1.5504.5.2.10 zhoneDsxTraps OBJECT IDENTIFIER ::= { zhoneDsx 10 } -- 1.3.6.1.4.1.5504.5.2.10.0 zhoneDsxTrapsV2 OBJECT IDENTIFIER ::= { zhoneDsxTraps 0 } -- 1.3.6.1.4.1.5504.5.2.10.0.1 zhoneLineStatusChange NOTIFICATION-TYPE OBJECTS { zhoneLineStatus, zhoneLineStatusLastChange, ifAlias } STATUS current DESCRIPTION "A zhoneLineStatusChange trap is not sent when the value of an instance zhoneLineStatus changes. It can be utilizeded by the NMS to trigger polls. When the line status change results from a hihter level line status change (i.e. ds3), then no traps for the ds1 are sent. Not supported on BAN in this release." ::= { zhoneDsxTrapsV2 1 } -- 1.3.6.1.4.1.5504.5.2.13 zhoneDs1BertTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1BertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BERT Table is used to issue Bit Error Rate Tests on a particular Ds1." ::= { zhoneDsx 13 } -- 1.3.6.1.4.1.5504.5.2.13.1 zhoneDs1BertEntry OBJECT-TYPE SYNTAX ZhoneDs1BertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BERT table." INDEX { zhoneBertIndex } ::= { zhoneDs1BertTable 1 } ZhoneDs1BertEntry ::= SEQUENCE { zhoneBertIndex Integer32, zhoneBertInterfaceIndex InterfaceIndex, zhoneBertRequest INTEGER, zhoneBertType INTEGER, zhoneBertTestDuration INTEGER, zhoneBertLoopUp INTEGER } -- 1.3.6.1.4.1.5504.5.2.13.1.1 zhoneBertIndex OBJECT-TYPE SYNTAX Integer32 (1..21) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field is the index field for the BERT test channel. There is only 1 BERT test allowed at a time." ::= { zhoneDs1BertEntry 1 } -- 1.3.6.1.4.1.5504.5.2.13.1.2 zhoneBertInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "This field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0." ::= { zhoneDs1BertEntry 2 } -- 1.3.6.1.4.1.5504.5.2.13.1.3 zhoneBertRequest OBJECT-TYPE SYNTAX INTEGER { noOp(1), start(2), stop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command request list for the Ds1 BERT test. This object corresponds to the list of test operations that can be performed. The possible values are noOp (1), -- used when reading the object start (2), -- start test stop (3), -- stop an initiated test Reading this object will always return the value 'noOp (1)'." ::= { zhoneDs1BertEntry 3 } -- 1.3.6.1.4.1.5504.5.2.13.1.4 zhoneBertType OBJECT-TYPE SYNTAX INTEGER { qrss(1), prbs215(2), prbs220(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of pattern to use for the BERT test on the Ds1. Supported patterns are qrss, prbs 2^15, or prbs 2^20." DEFVAL { qrss } ::= { zhoneDs1BertEntry 4 } -- 1.3.6.1.4.1.5504.5.2.13.1.5 zhoneBertTestDuration OBJECT-TYPE SYNTAX INTEGER (10..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The duration in seconds of the BERT test for the Ds1. The valid range for this field is 10-300 seconds." ::= { zhoneDs1BertEntry 5 } -- 1.3.6.1.4.1.5504.5.2.13.1.6 zhoneBertLoopUp OBJECT-TYPE SYNTAX INTEGER { noloop(1), lineloop(2), payloadloop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The loop code to be sent to the farend prior to running the BERT test for the Ds1." ::= { zhoneDs1BertEntry 6 } -- 1.3.6.1.4.1.5504.5.2.14 zhoneDs1BertResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneDs1BertResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BERT Results Table is used to retrieve results from a Bit Error Rate Test on a particular Ds1." ::= { zhoneDsx 14 } -- 1.3.6.1.4.1.5504.5.2.14.1 zhoneDs1BertResultsEntry OBJECT-TYPE SYNTAX ZhoneDs1BertResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BERT results table." INDEX { zhoneBertIndex } ::= { zhoneDs1BertResultsTable 1 } ZhoneDs1BertResultsEntry ::= SEQUENCE { zhoneBertStatus INTEGER, zhoneBertElapsedTime INTEGER, zhoneBertErroredSeconds INTEGER, zhoneBertOutOfSynchSeconds INTEGER, zhoneBertErrors INTEGER } -- 1.3.6.1.4.1.5504.5.2.14.1.1 zhoneBertStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), abortInProgress(2), complete(3), noResults(4), aborted(5), unsupported(6), portNotAdminTest(7), failed(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The overall BERT operational status. This field will indicate the operation status for the interface indexed by zhoneBertInterfaceIndex. inProgress (1) - if the test is currently running. abortInProgress (2) - if a request to stop the test is still in progress. complete (3) - if the test has been run at least once since system reset and has completed. noResults (4) - if the test results are empty, such as after a system reset. aborted (5) - if the test was aborted by the user before it could complete. unsupported (6) - if the device does not support BERT. portNotAdminTest (7) - if port not in admin TEST. failed (8) - if BERT failed to complete." ::= { zhoneDs1BertResultsEntry 1 } -- 1.3.6.1.4.1.5504.5.2.14.1.2 zhoneBertElapsedTime OBJECT-TYPE SYNTAX INTEGER (0..300) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time of the most recent BERT test." ::= { zhoneDs1BertResultsEntry 2 } -- 1.3.6.1.4.1.5504.5.2.14.1.3 zhoneBertErroredSeconds OBJECT-TYPE SYNTAX INTEGER (0..300) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete." ::= { zhoneDs1BertResultsEntry 3 } -- 1.3.6.1.4.1.5504.5.2.14.1.4 zhoneBertOutOfSynchSeconds OBJECT-TYPE SYNTAX INTEGER (0..300) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of out of synch seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete." ::= { zhoneDs1BertResultsEntry 4 } -- 1.3.6.1.4.1.5504.5.2.14.1.5 zhoneBertErrors OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors for the most recent BERT test. This field is only valid when zhoneBertStatus is complete." ::= { zhoneDs1BertResultsEntry 5 } END -- -- phyDs1.mib --