--MibName=rcDai -- ***************************************************************** -- switch-dai-mib.mib: Raisecom DAI MIB file -- -- Jun 2008, yupeng -- -- Copyright (c) 1994-2000, 2001 by Raisecom, Inc. -- All rights reserved. -- 01, 20110812, ROS00000394 change the default value of the node rcDaiProtectVlanList -- ***************************************************************** SWITCH-DAI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MacAddress,RowStatus,TruthValue FROM SNMPv2-TC PortList, Vlanset, EnableVar FROM SWITCH-TC rcPortEntry FROM SWITCH-SYSTEM-MIB iscomSwitch FROM RAISECOM-BASE-MIB; rcDai MODULE-IDENTITY LAST-UPDATED "0806130000Z" ORGANIZATION "raisecom Group" CONTACT-INFO " Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: yupeng@raisecom.com" DESCRIPTION "The MIB module for dynamic arp inspection." ::= { iscomSwitch 38} ------------------------------------------------------------------------------ -- -- rcDai - Dynamic ARP Inspection -- -- This group is used to instrument the dynamic ARP inspection support. -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ rcDaiConfig OBJECT IDENTIFIER ::= { rcDai 1 } ------------------------------------------------------------------------------ -- -- DAI Config -- rcDaiStaticEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether the static DAI bind is enabled on the device. A disable(2) value will prevent the static DAI bind rule to write to hardware on the device." DEFVAL { disable } ::= { rcDaiConfig 1 } rcDaiDhcpSnoopEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether the dhcp snooping DAI bind is enabled on the device. A disable(2) value will prevent the dhcp snooping DAI bind on the device." DEFVAL { disable } ::= { rcDaiConfig 2 } rcDaiBindCurrentRules OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current DAI rule number on the device." ::= { rcDaiConfig 3 } rcDaiBindMaxRules OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the historical maximum DAI rule number on this device." ::= { rcDaiConfig 4 } -- -- DAI Port Config -- rcDaiPortTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDaiPortTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries that identify the configured DAI trust for each port." ::= { rcDaiConfig 5 } rcDaiPortTrustEntry OBJECT-TYPE SYNTAX RcDaiPortTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rcDaiPortStateTable. The entry identify the configured DAI trust for the port." AUGMENTS { rcPortEntry } ::= { rcDaiPortTrustTable 1 } RcDaiPortTrustEntry ::= SEQUENCE { rcDaiTrust INTEGER } rcDaiTrust OBJECT-TYPE SYNTAX INTEGER { trust(1), untrust(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the whether trust arp packet on this port." DEFVAL { 2 } ::= { rcDaiPortTrustEntry 1 } -- -- The DAI bind table -- rcDaiBindTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDaiBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of DAI bind table." ::= { rcDaiConfig 6 } rcDaiBindEntry OBJECT-TYPE SYNTAX RcDaiBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the list of DAI bind table." INDEX { rcDaiBindIp} ::= { rcDaiBindTable 1 } RcDaiBindEntry ::= SEQUENCE { rcDaiBindIp IpAddress, rcDaiBindPortId INTEGER, rcDaiBindMac MacAddress, rcDaiBindVlan INTEGER, rcDaiBindMode INTEGER, rcDaiBindInHw INTEGER, rcDaiBindRowStatus RowStatus } rcDaiBindIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index identifying this entry.The ip address of this bind rule." ::= { rcDaiBindEntry 1 } rcDaiBindPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the port id of this rule." ::= { rcDaiBindEntry 2 } rcDaiBindMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the mac address of this rule." ::= { rcDaiBindEntry 3 } rcDaiBindVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the vlan of this rule." ::= { rcDaiBindEntry 4 } rcDaiBindMode OBJECT-TYPE SYNTAX INTEGER { static(1), dhcp-snooping(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the mode of this rule.static(1) specifies this rule is staticly configured.dhcp snooping(2) specifies this rule is learned from dhcp snooping." ::= { rcDaiBindEntry 5 } rcDaiBindInHw OBJECT-TYPE SYNTAX INTEGER { inHw(1), notinHw(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the state of this rule.InHw(1) specifies this rule is in hardware.notInHw(1) specifies this rule is not in hardware." ::= { rcDaiBindEntry 6 } rcDaiBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { rcDaiBindEntry 7 } -- -- Arp Rate Limit port config -- rcArpRLPortEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF RcArpRLPortEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries that identify the configured arp rate limit enable for each port." ::= { rcDaiConfig 7 } rcArpRLPortEnableEntry OBJECT-TYPE SYNTAX RcArpRLPortEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rcArpRLPortEnableTable. The entry identify the configured arp rate limit enable for the port." AUGMENTS { rcPortEntry } ::= { rcArpRLPortEnableTable 1 } RcArpRLPortEnableEntry ::= SEQUENCE { rcArpRLEnable INTEGER } rcArpRLEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the whether enable arp rate limit on this port." DEFVAL { disable } ::= { rcArpRLPortEnableEntry 1 } rcArpRLPortRateTable OBJECT-TYPE SYNTAX SEQUENCE OF RcArpRLPortRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries that identify the configured arp rate limit rate for each port." ::= { rcDaiConfig 8 } rcArpRLPortRateEntry OBJECT-TYPE SYNTAX RcArpRLPortRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rcArpRLPortRateTable. The entry identify the configured arp rate limit rate for the port." AUGMENTS { rcPortEntry } ::= { rcArpRLPortRateTable 1 } RcArpRLPortRateEntry ::= SEQUENCE { rcArpRLRate INTEGER } rcArpRLRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the rate of arp rate limit on this port." DEFVAL { 100 } ::= { rcArpRLPortRateEntry 1 } rcArpRLPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RcArpRLPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries that identify the arp rate limit status for each port." ::= { rcDaiConfig 9 } rcArpRLPortStatusEntry OBJECT-TYPE SYNTAX RcArpRLPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rcArpRLPortStatusTable. The entry identify the arp rate limit status for the port." AUGMENTS { rcPortEntry } ::= { rcArpRLPortStatusTable 1 } RcArpRLPortStatusEntry ::= SEQUENCE { rcArpRLStatus INTEGER } rcArpRLStatus OBJECT-TYPE SYNTAX INTEGER { unoverload(0), overload(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of arp rate limit on this port." ::= { rcArpRLPortStatusEntry 1 } -- -- Arp Rate Limit config -- rcArpRLRecoverEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether the arp rate limit can auto recover after port's arp packets overload." DEFVAL { disable } ::= { rcDaiConfig 10 } rcArpRLRecoverTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the arp rate limit recover time." DEFVAL { 30 } ::= { rcDaiConfig 11 } ---vlan based DAI config rcDaiIsVlanAll OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if Dai protect all vlan." DEFVAL { disable } ::= { rcDaiConfig 12 } rcDaiProtectVlanList OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the protected vlanlist of Dai. if not config the object, the Dai protect all vlan." ::= { rcDaiConfig 13 } END