--MibName=rcDot1ag RAISECOM-DOT1AG-MIB DEFINITIONS ::= BEGIN -- ****************************************************************** -- IEEE P802.1ag(TM) CFM MIB -- ****************************************************************** IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, TimeInterval, TimeStamp, RowStatus, TruthValue, MacAddress, TDomain, TAddress FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] LldpChassisId, LldpChassisIdSubtype, LldpPortId, LldpPortIdSubtype FROM LLDP-MIB -- [IEEExxx] VlanIdOrNone, VlanId FROM Q-BRIDGE-MIB -- [RFC4363] iscomSwitch FROM RAISECOM-BASE-MIB Dot1agCfmMaintDomainNameType, Dot1agCfmMaintDomainName, Dot1agCfmIngressActionFieldValue, Dot1agCfmMaintAssocNameType, Dot1agCfmMaintAssocName, Dot1agCfmMDLevel, Dot1agCfmMDLevelOrNone, Dot1agCfmMpDirection, Dot1agCfmPortStatus, Dot1agCfmInterfaceStatus, Dot1agCfmHighestDefectPri, Dot1agCfmLowestAlarmPri, Dot1agCfmMepId, Dot1agCfmMepIdOrZero, Dot1agCfmMhfCreation, Dot1agCfmIdPermission, Dot1agCfmCcmInterval, Dot1agCfmFngState, Dot1agCfmRelayActionFieldValue, Dot1agCfmEgressActionFieldValue, Dot1agCfmRemoteMepState, Dot1afCfmIndexIntegerNextFree, Dot1agCfmMepDefects, dot1agCfmMepHighestPrDefect, Dot1agCfmConfigErrors, Dot1agCfmPbbComponentIdentifier FROM IEEE8021-CFM-MIB --[IEEE8021-CFM-MIB81.mib] ; rcDot1ag MODULE-IDENTITY LAST-UPDATED "200706100000Z" -- 06/10/2007 00:00GMT ORGANIZATION "Raisecom, Inc." CONTACT-INFO " Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: chendonghua@raisecom.com" DESCRIPTION "This MIB module defines objects to CFM " REVISION "200712210000Z" -- 12/21/2007 00:00GMT DESCRIPTION "this mib is redefined in order to access from private MIB note outside!" ::= { iscomSwitch 32 } rcDot1agNotifications OBJECT IDENTIFIER ::= { rcDot1ag 0 } rcDot1agMIBObjects OBJECT IDENTIFIER ::= { rcDot1ag 1 } rcDot1agCfmConformance OBJECT IDENTIFIER ::= { rcDot1ag 2 } -- ****************************************************************** -- Groups in the CFM MIB Module -- ****************************************************************** rcDot1agCfmStack OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 1 } rcDot1agCfmDefaultMd OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 2 } rcDot1agCfmVlan OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 3 } rcDot1agCfmConfigErrorList OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 4 } rcDot1agCfmMd OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 5 } rcDot1agCfmMa OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 6 } rcDot1agCfmMep OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 7 } -- ****************************************************************** -- Textual conventions -- ****************************************************************** -- ****************************************************************** -- The Stack Object. This group will contain all the MIBs objects -- needed to access the Stack managed object. -- ****************************************************************** -- ****************************************************************** -- The CFM Stack Table -- ****************************************************************** rcDot1agCfmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. " REFERENCE "802.1ag clauses 12.14.2" ::= { rcDot1agCfmStack 1 } rcDot1agCfmStackEntry OBJECT-TYPE SYNTAX RcDot1agCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Stack table entry" INDEX { rcDot1agCfmStackifIndex, rcDot1agCfmStackVlanIdOrNone, rcDot1agCfmStackMdLevel, rcDot1agCfmStackDirection } ::= { rcDot1agCfmStackTable 1 } RcDot1agCfmStackEntry ::= SEQUENCE { rcDot1agCfmStackifIndex InterfaceIndex, rcDot1agCfmStackVlanIdOrNone VlanIdOrNone, rcDot1agCfmStackMdLevel Dot1agCfmMDLevel, rcDot1agCfmStackDirection Dot1agCfmMpDirection, rcDot1agCfmStackMdIndex Unsigned32, rcDot1agCfmStackMaIndex Unsigned32, rcDot1agCfmStackMepId Dot1agCfmMepIdOrZero, rcDot1agCfmStackMacAddress MacAddress } rcDot1agCfmStackifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the rcDot1agCfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the rcDot1agCfmStackTable with the interface index. " REFERENCE "802.1ag clause 12.14.2.1.2:a" ::= { rcDot1agCfmStackEntry 1 } rcDot1agCfmStackVlanIdOrNone OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID to which the MP is attached, or 0, if none." REFERENCE "802.1ag clauses 12.14.2.1.2:d, 22.1.7" ::= { rcDot1agCfmStackEntry 2 } rcDot1agCfmStackMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS not-accessible STATUS current DESCRIPTION "MD Level of the Maintenance Point." REFERENCE "802.1ag clause 12.14.2.1.2:b" ::= { rcDot1agCfmStackEntry 3 } rcDot1agCfmStackDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction in which the MP faces on the Bridge Port" REFERENCE "802.1ag clause 12.14.2.1.2:c" ::= { rcDot1agCfmStackEntry 4 } rcDot1agCfmStackMdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Maintenance Domain in the rcDot1agCfmMdTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:b" ::= { rcDot1agCfmStackEntry 5 } rcDot1agCfmStackMaIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the MA in the rcDot1agCfmMaNetTable and rcDot1agCfmMaCompTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:c" ::= { rcDot1agCfmStackEntry 6 } rcDot1agCfmStackMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If an MEP is configured, the MEPID, else 0" REFERENCE "802.1ag clause 12.14.2.1.3:d" ::= { rcDot1agCfmStackEntry 7 } rcDot1agCfmStackMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MP." REFERENCE "802.1ag clause 12.14.2.1.3:e" ::= { rcDot1agCfmStackEntry 8 } -- ****************************************************************** -- The VLAN Table -- ****************************************************************** rcDot1agCfmVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VLAN of that VID. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clauses 12.14.3.1.3:a, 12.14.3.2.2:a, 12.14.5.3.2:c, 12.14.6.1.3:b, 22.1.5." ::= { rcDot1agCfmVlan 1 } rcDot1agCfmVlanEntry OBJECT-TYPE SYNTAX RcDot1agCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN table entry." INDEX { rcDot1agCfmVlanComponentId, rcDot1agCfmVlanVid } ::= { rcDot1agCfmVlanTable 1 } RcDot1agCfmVlanEntry ::= SEQUENCE { rcDot1agCfmVlanComponentId Dot1agCfmPbbComponentIdentifier, rcDot1agCfmVlanVid VlanId, rcDot1agCfmVlanPrimaryVid VlanId, rcDot1agCfmVlanRowStatus RowStatus } rcDot1agCfmVlanComponentId OBJECT-TYPE SYNTAX Dot1agCfmPbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this rcDot1agCfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) must be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { rcDot1agCfmVlanEntry 1 } rcDot1agCfmVlanVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. " ::= { rcDot1agCfmVlanEntry 2 } rcDot1agCfmVlanPrimaryVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Primary VLAN ID of the VLAN with which this entry's rcDot1agCfmVlanVid is associated. This value must not equal the value of rcDot1agCfmVlanVid. " ::= { rcDot1agCfmVlanEntry 3 } rcDot1agCfmVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { rcDot1agCfmVlanEntry 4 } -- ******************************************************************* -- The Default MD Level object. This group will contain all the -- MIB objects needed to access and modify default MD level -- managed objects. -- ******************************************************************* rcDot1agCfmDefaultMdDefLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdLevel object contains the value -1. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {0} ::= { rcDot1agCfmDefaultMd 1 } rcDot1agCfmDefaultMdDefMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation -- { -- defMHFnone (1), -- defMHFdefault (2), -- defMHFexplicit (3) -- } MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdMhfCreation object contains the value defMHFdefer. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:d" DEFVAL {defMHFnone} ::= { rcDot1agCfmDefaultMd 2 } rcDot1agCfmDefaultMdDefIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission -- { -- sendIdNone (1), -- sendIdChassis (2), -- sendIdManage (3), -- sendIdChassisManage (4) -- } MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, for each rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdIdPermission object contains the value sendIdDefer. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:e" DEFVAL { sendIdNone } ::= { rcDot1agCfmDefaultMd 3 } -- ******************************************************************* -- The Default MD Level Table -- ******************************************************************* rcDot1agCfmDefaultMdTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in subclause 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in subclause 22.2.3 in place of this table entry's objects. The agent maintains the value of rcDot1agCfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3" ::= { rcDot1agCfmDefaultMd 4 } rcDot1agCfmDefaultMdEntry OBJECT-TYPE SYNTAX RcDot1agCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Default MD Level table entry." INDEX { rcDot1agCfmDefaultMdComponentId, rcDot1agCfmDefaultMdPrimaryVid } ::= { rcDot1agCfmDefaultMdTable 1 } RcDot1agCfmDefaultMdEntry ::= SEQUENCE { rcDot1agCfmDefaultMdComponentId Dot1agCfmPbbComponentIdentifier, rcDot1agCfmDefaultMdPrimaryVid VlanId, rcDot1agCfmDefaultMdStatus TruthValue, rcDot1agCfmDefaultMdLevel Dot1agCfmMDLevelOrNone, rcDot1agCfmDefaultMdMhfCreation Dot1agCfmMhfCreation, rcDot1agCfmDefaultMdIdPermission Dot1agCfmIdPermission } rcDot1agCfmDefaultMdComponentId OBJECT-TYPE SYNTAX Dot1agCfmPbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this rcDot1agCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) must be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { rcDot1agCfmDefaultMdEntry 1 } rcDot1agCfmDefaultMdPrimaryVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Primary VID of the VLAN to which this entry's objects apply." ::= { rcDot1agCfmDefaultMdEntry 2 } rcDot1agCfmDefaultMdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false. " REFERENCE "802.1ag clause 12.14.3.1.3:b" ::= { rcDot1agCfmDefaultMdEntry 3 } rcDot1agCfmDefaultMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevelOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. If this object has the value -1, the MD Level for MHF creation for this VLAN is controlled by rcDot1agCfmDefaultMdDefLevel. " REFERENCE "802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {-1} ::= { rcDot1agCfmDefaultMdEntry 4 } rcDot1agCfmDefaultMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by rcDot1agCfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of rcDot1agCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:d" DEFVAL {defMHFdefer} ::= { rcDot1agCfmDefaultMdEntry 5 } rcDot1agCfmDefaultMdIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by rcDot1agCfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of rcDot1agCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:e" DEFVAL { sendIdDefer } ::= { rcDot1agCfmDefaultMdEntry 6 } -- ****************************************************************** -- The CFM configuration error list managed object. This group will -- contain all the MIB objects used to read the interfaces and VIDs -- configured incorrectly. -- ****************************************************************** -- ****************************************************************** -- The CFM Configuration Error List Table -- ****************************************************************** rcDot1agCfmConfigErrorListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. " REFERENCE "802.1ag clause 12.14.4" ::= {rcDot1agCfmConfigErrorList 1} rcDot1agCfmConfigErrorListEntry OBJECT-TYPE SYNTAX RcDot1agCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Config Error List Table entry" INDEX { rcDot1agCfmConfigErrorListVid, rcDot1agCfmConfigErrorListIfIndex } ::= { rcDot1agCfmConfigErrorListTable 1} RcDot1agCfmConfigErrorListEntry ::= SEQUENCE { rcDot1agCfmConfigErrorListVid VlanId, rcDot1agCfmConfigErrorListIfIndex InterfaceIndex, rcDot1agCfmConfigErrorListErrorType Dot1agCfmConfigErrors } rcDot1agCfmConfigErrorListVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID of the VLAN with interfaces in error." REFERENCE "802.1ag Clause 12.14.4.1.2:a" ::= { rcDot1agCfmConfigErrorListEntry 1 } rcDot1agCfmConfigErrorListIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in rcDot1agCfmConfigErrorListTable indexed by that InterfaceIndex value. " REFERENCE "802.1ag clause 12.14.4.1.2:b" ::= { rcDot1agCfmConfigErrorListEntry 2 } rcDot1agCfmConfigErrorListErrorType OBJECT-TYPE SYNTAX Dot1agCfmConfigErrors MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. " REFERENCE "802.1ag clause 12.14.4.1.3:b" ::= { rcDot1agCfmConfigErrorListEntry 3 } -- ****************************************************************** -- The Maintenance Domain Managed Object. This group contains all -- the MIB objects used to maintain Maintenance Domains. -- ****************************************************************** rcDot1agCfmMdTableNextIndex OBJECT-TYPE SYNTAX Dot1afCfmIndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for rcDot1agCfmMdIndex in the rcDot1agCfmMdTable, or a zero to indicate that none exist. " ::= { rcDot1agCfmMd 1 } -- ****************************************************************** -- The Maintenance Domain Table -- ****************************************************************** rcDot1agCfmMdTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.21) as the network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. " REFERENCE "802.1ag clauses 3.21 and 18.1" ::= { rcDot1agCfmMd 2 } rcDot1agCfmMdEntry OBJECT-TYPE SYNTAX RcDot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage. " INDEX {rcDot1agCfmMdIndex } ::= { rcDot1agCfmMdTable 1 } RcDot1agCfmMdEntry ::= SEQUENCE { rcDot1agCfmMdIndex Unsigned32, rcDot1agCfmMdFormat Dot1agCfmMaintDomainNameType, rcDot1agCfmMdName Dot1agCfmMaintDomainName, rcDot1agCfmMdMdLevel Dot1agCfmMDLevel, rcDot1agCfmMdMhfCreation Dot1agCfmMhfCreation, rcDot1agCfmMdMhfIdPermission Dot1agCfmIdPermission, rcDot1agCfmMdMaNextIndex Dot1afCfmIndexIntegerNextFree, rcDot1agCfmMdRowStatus RowStatus } rcDot1agCfmMdIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to the Maintenance Domain table. rcDot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value should keep increasing up to the time that they wrap around. This is to facilitate access control based on OID. " ::= { rcDot1agCfmMdEntry 1 } rcDot1agCfmMdFormat OBJECT-TYPE SYNTAX Dot1agCfmMaintDomainNameType MAX-ACCESS read-create STATUS current DESCRIPTION "The type (and thereby format) of the Maintenance Domain Name." REFERENCE "802.1ag clause 21.6.5.1" DEFVAL { charString } ::= { rcDot1agCfmMdEntry 2 } rcDot1agCfmMdName OBJECT-TYPE SYNTAX Dot1agCfmMaintDomainName MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain name. The type/format of this object is determined by the value of the rcDot1agCfmMdNameType object. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. Clause 3.23 defines a Maintenance Domain name as the identifier, unique over the domain for which CFM is to protect against accidental concatenation of Service Instances, of a particular Maintenance Domain. " REFERENCE "802.1ag clauses 3.23, 12.14.5, and 21.6.5.3" DEFVAL { "DEFAULT" } ::= { rcDot1agCfmMdEntry 3 } rcDot1agCfmMdMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain Level." REFERENCE "802.1ag clause 12.14.5.1.3:b" DEFVAL { 0 } ::= { rcDot1agCfmMdEntry 4 } rcDot1agCfmMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation -- { -- defMHFnone (1), -- defMHFdefault (2), -- defMHFexplicit (3) -- } MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. " REFERENCE "802.1ag clause 12.14.5.1.3:c" DEFVAL { defMHFnone } ::= { rcDot1agCfmMdEntry 5 } rcDot1agCfmMdMhfIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission -- { -- sendIdNone (1), -- sendIdChassis (2), -- sendIdManage (3), -- sendIdChassisManage (4) -- } MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. " REFERENCE "802.1ag clause 12.14.5.1.3:d" DEFVAL { sendIdNone } ::= { rcDot1agCfmMdEntry 6 } rcDot1agCfmMdMaNextIndex OBJECT-TYPE SYNTAX Dot1afCfmIndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "Value to be used as the index of the MA table entries, both the rcDot1agCfmMaNetTable and the rcDot1agCfmMaCompTable, for this Maintenance Domain when the management entity wants to create a new row in those tables. " ::= { rcDot1agCfmMdEntry 7 } rcDot1agCfmMdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { rcDot1agCfmMdEntry 8 } -- ****************************************************************** -- The Maintenance Association Object. This group contains all the -- MIB objects used to read, create, modify, and delete Maintenance -- Associations in the MIB. -- ****************************************************************** -- ****************************************************************** -- The Maintenance Association (MA) Network Table -- ****************************************************************** rcDot1agCfmMaNetTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMaNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is constant across all Bridges in a Maintenance Domain, and across all components of a single Bridge. That part of the MA table that can vary from Bridge component to Bridge component is contained in the rcDot1agCfmMaCompTable. Creation of a Service Instance establishes a connectionless association among the selected DSAPs. Configuring a Maintenance association End Point (MEP) at each of the DSAPs creates a Maintenance Association (MA) to monitor that connectionless connectivity. The MA is identified by a Short MA Name that is unique within the Maintenance Domain and chosen to facilitate easy identification of the Service Instance. Together, the Maintenance Domain Name and the Short MA Name form the Maintenance Association Identifier (MAID) that is carried in CFM Messages to identify incorrect connectivity among Service Instances. A small integer, the Maintenance association End Point Identifier (MEPID), identifies each MEP among those configured on a single MA (802.1ag clauses 3.16 and 18.2). This table uses two indices, first index is the index of the Maintenance Domain table. The second index is the same as the index of the rcDot1agCfmMaCompEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 18.2" ::= { rcDot1agCfmMa 1 } rcDot1agCfmMaNetEntry OBJECT-TYPE SYNTAX RcDot1agCfmMaNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {rcDot1agCfmMdIndex, rcDot1agCfmMaIndex } ::= { rcDot1agCfmMaNetTable 1 } RcDot1agCfmMaNetEntry ::= SEQUENCE { rcDot1agCfmMaIndex Unsigned32, rcDot1agCfmMaNetFormat Dot1agCfmMaintAssocNameType, rcDot1agCfmMaNetName Dot1agCfmMaintAssocName, rcDot1agCfmMaNetCcmInterval Dot1agCfmCcmInterval, rcDot1agCfmMaNetRowStatus RowStatus } rcDot1agCfmMaIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MA table rcDot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. " ::= { rcDot1agCfmMaNetEntry 1 } rcDot1agCfmMaNetFormat OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocNameType MAX-ACCESS read-create STATUS current DESCRIPTION "The type (and thereby format) of the Maintenance Association Name. " REFERENCE "802.1ag clauses 21.6.5.4" ::= { rcDot1agCfmMaNetEntry 2 } rcDot1agCfmMaNetName OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocName MAX-ACCESS read-create STATUS current DESCRIPTION "The Short Maintenance Association name. The type/format of this object is determined by the value of the rcDot1agCfmMaNetNameType object. This name must be unique within a maintenance domain. " REFERENCE "802.1ag clauses 21.6.5.6, and Table 21-20" ::= { rcDot1agCfmMaNetEntry 3 } rcDot1agCfmMaNetCcmInterval OBJECT-TYPE SYNTAX Dot1agCfmCcmInterval MAX-ACCESS read-create STATUS current DESCRIPTION "Interval between CCM transmissions to be used by all MEPs in the MA. " REFERENCE "802.1ag clause 12.14.6.1.3:e" DEFVAL { interval1s } ::= { rcDot1agCfmMaNetEntry 4 } rcDot1agCfmMaNetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { rcDot1agCfmMaNetEntry 5 } -- ****************************************************************** -- The Maintenance Association (MA) Component Table -- ****************************************************************** rcDot1agCfmMaCompTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the rcDot1agCfmMaNetTable. This table uses three indices, first index is the rcDot1agCfmPbbComponentIdentifier that identifies the component within the Bridge for which the information in the rcDot1agCfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the rcDot1agCfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 18.2" ::= { rcDot1agCfmMa 2 } rcDot1agCfmMaCompEntry OBJECT-TYPE SYNTAX RcDot1agCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {rcDot1agCfmMaComponentId, rcDot1agCfmMdIndex, rcDot1agCfmMaIndex } ::= { rcDot1agCfmMaCompTable 1 } RcDot1agCfmMaCompEntry ::= SEQUENCE { rcDot1agCfmMaComponentId Dot1agCfmPbbComponentIdentifier, rcDot1agCfmMaCompPrimaryVlanId VlanIdOrNone, rcDot1agCfmMaCompMhfCreation Dot1agCfmMhfCreation, rcDot1agCfmMaCompIdPermission Dot1agCfmIdPermission, rcDot1agCfmMaCompNumberOfVids Unsigned32, rcDot1agCfmMaCompRowStatus RowStatus } rcDot1agCfmMaComponentId OBJECT-TYPE SYNTAX Dot1agCfmPbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this rcDot1agCfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) must be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { rcDot1agCfmMaCompEntry 1 } rcDot1agCfmMaCompPrimaryVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. If the MA is associated with more than one VID, the rcDot1agCfmVlanTable lists them." REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { rcDot1agCfmMaCompEntry 2 } rcDot1agCfmMaCompMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:c" DEFVAL { defMHFdefer } ::= { rcDot1agCfmMaCompEntry 3 } rcDot1agCfmMaCompIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:d" DEFVAL { sendIdDefer } ::= { rcDot1agCfmMaCompEntry 4 } rcDot1agCfmMaCompNumberOfVids OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VIDs associated with the MA. " REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { rcDot1agCfmMaCompEntry 5 } rcDot1agCfmMaCompRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { rcDot1agCfmMaCompEntry 6 } -- ****************************************************************** -- The list of known MEPs for a given MA -- ****************************************************************** rcDot1agCfmMaMepListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMaMepListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of MEPIDs that belong to this MA. Clause 12.14.6.1.3 specifies that a list of MEPIDs in all bridges in that MA, but since SNMP SMI does not allow to state in a MIB that an object in a table is an array, the information has to be stored in another table with two indices, being the first index, the index of the table that contains the list or array. For all bridges in which the same MAID {rcDot1agCfmMdFormat, rcDot1agCfmMdName, rcDot1agCfmMaNetFormat, and rcDot1agCfmMaNetName} is configured, the same set of rcDot1agCfmMaMepListIdentifiers must be configured in the bridges' rcDot1agCfmMaMepListTables. This allows each MEP to determine whether or not it is receiving CCMs from all of the other MEPs in the MA. For example, if one were creating a new MA whose MAID were {charString, 'Dom1', charString, 'MA1'}, that had 2 MEPs, whose MEPIDs were 1 and 3, one could, in Bridge A: 1. Get a new MD index d from rcDot1agCfmMdTableNextIndex. 2. Create the Maintenance Domain {charString, 'Dom1'}. 3. Get a new MA index a from rcDot1agCfmMdMaNextIndex [d]. 4. Create the Maintenance Association {charString, 'MA1'}. 5. Create a new rcDot1agCfmMaMepListEntry for each of the MEPs in the MA: [d, a, 1] and [d, a, 3]. 6. Create one of the new MEPs, say [d, a, 1]. Then, in Bridge B: 7. Do all of these steps 1-6, except for using the other MEPID for the new MEP in Step 6, in this example, MEPID 3. Note that, when creating the MA, MEP List Table, and MEP entries in the second bridge, the indices 'd' and 'a' identifying the MAID {charString, 'Dom1', charString, 'MA1'} may have different values than those in the first Bridge. " REFERENCE "802.1ag clause 12.14.6.1.3:g" ::= { rcDot1agCfmMa 3 } rcDot1agCfmMaMepListEntry OBJECT-TYPE SYNTAX RcDot1agCfmMaMepListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The known MEPS table entry." INDEX { rcDot1agCfmMdIndex, rcDot1agCfmMaIndex, rcDot1agCfmMaMepListIdentifier } ::= { rcDot1agCfmMaMepListTable 1 } RcDot1agCfmMaMepListEntry ::= SEQUENCE { rcDot1agCfmMaMepListIdentifier Dot1agCfmMepId, rcDot1agCfmMaMepListRowStatus RowStatus } rcDot1agCfmMaMepListIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEPID" REFERENCE "802.1ag clause 12.14.6.1.3:g" ::= { rcDot1agCfmMaMepListEntry 1 } rcDot1agCfmMaMepListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. " ::= { rcDot1agCfmMaMepListEntry 2 } -- ****************************************************************** -- The MEP Object. This object represents a Maintenance End -- Point as described in 802.1ag document. -- ****************************************************************** -- ****************************************************************** -- The MEP Table -- ****************************************************************** rcDot1agCfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (802.1ag clause 3.17). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it should transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Wait for rcDot1agCfmMepTransmitLbmStatus value to be true. To do this do this sequence: a. an SNMP GET for both SnmpSetSerialNo and rcDot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU). b. Check if value for rcDot1agCfmMepTransmitLbmStatus is true. - if not, wait x seconds, go to step a above. - if yes, save the value of SnmpSetSerialNo and go to step 2) below 2) Change rcDot1agCfmMepTransmitLbmStatus value from true to false to ensure no other management entity will use the service. In order to not disturb a possible other NMS do this by sending an SNMP SET for both SnmpSetSerialNo and rcDot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU, and make sure SNmpSetSerialNo is the first varBind). For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures that two cooperating NMSes will not step on each others toes. 3) Setup the different data to be sent (number of messages, optional TLVs,...), except do not set rcDot1agCfmMepTransmitLbmMessages. 4) Record the current values of rcDot1agCfmMepLbrIn, rcDot1agCfmMepLbrInOutOfOrder, and rcDot1agCfmMepLbrBadMsdu. 6) Set rcDot1agCfmMepTransmitLbmMessages to a non-zero value to initiate transmission of Loopback messages. 7) Check the value of rcDot1agCfmMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) Monitor the value of rcDot1agCfmMepTransmitLbmMessages. When it reaches 0, the last LBM has been transmitted. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) Compare rcDot1agCfmMepLbrIn, rcDot1agCfmMepLbrInOutOfOrder, and rcDot1agCfmMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. 10) Change the rcDot1agCfmMepTransmitLbmStatus value back to true to allow other management entities to use the table. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above, except transmission is initiated by writing a value to the rcDot1agCfmMepTransmitLtmFlags object. Upon successfully initiating the transmission, the variables rcDot1agCfmMepTransmitLtmSeqNumber and rcDot1agCfmMepTransmitLtmEgressIdentifier return the information required to recover the results of the LTM from the rcDot1agCfmLtrTable. " REFERENCE "802.1ag clauses 12.14.7 and 19.2" ::= { rcDot1agCfmMep 1 } rcDot1agCfmMepEntry OBJECT-TYPE SYNTAX RcDot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { rcDot1agCfmMdIndex, rcDot1agCfmMaIndex, rcDot1agCfmMepIdentifier } ::= { rcDot1agCfmMepTable 1 } RcDot1agCfmMepEntry ::= SEQUENCE { rcDot1agCfmMepIdentifier Dot1agCfmMepId, rcDot1agCfmMepIfIndex InterfaceIndexOrZero, rcDot1agCfmMepDirection Dot1agCfmMpDirection, rcDot1agCfmMepPrimaryVid Unsigned32, rcDot1agCfmMepActive TruthValue, rcDot1agCfmMepFngState Dot1agCfmFngState, rcDot1agCfmMepCciEnabled TruthValue, rcDot1agCfmMepCcmLtmPriority Unsigned32, rcDot1agCfmMepMacAddress MacAddress, rcDot1agCfmMepLowPrDef Dot1agCfmLowestAlarmPri, rcDot1agCfmMepFngAlarmTime TimeInterval, rcDot1agCfmMepFngResetTime TimeInterval, rcDot1agCfmMepHighestPrDefect Dot1agCfmHighestDefectPri, rcDot1agCfmMepDefects Dot1agCfmMepDefects, rcDot1agCfmMepErrorCcmLastFailure OCTET STRING, rcDot1agCfmMepXconCcmLastFailure OCTET STRING, rcDot1agCfmMepCcmSequenceErrors Counter32, rcDot1agCfmMepCciSentCcms Counter32, rcDot1agCfmMepNextLbmTransId Unsigned32, rcDot1agCfmMepLbrIn Counter32, rcDot1agCfmMepLbrInOutOfOrder Counter32, rcDot1agCfmMepLbrBadMsdu Counter32, rcDot1agCfmMepLtmNextSeqNumber Unsigned32, rcDot1agCfmMepUnexpLtrIn Counter32, rcDot1agCfmMepLbrOut Counter32, rcDot1agCfmMepTransmitLbmStatus TruthValue, rcDot1agCfmMepTransmitLbmDestMacAddress MacAddress, rcDot1agCfmMepTransmitLbmDestMepId Dot1agCfmMepIdOrZero, rcDot1agCfmMepTransmitLbmDestIsMepId TruthValue, rcDot1agCfmMepTransmitLbmMessages Integer32, rcDot1agCfmMepTransmitLbmDataTlv OCTET STRING, rcDot1agCfmMepTransmitLbmVlanPriority Integer32, rcDot1agCfmMepTransmitLbmVlanDropEnable TruthValue, rcDot1agCfmMepTransmitLbmResultOK TruthValue, rcDot1agCfmMepTransmitLbmSeqNumber Unsigned32, rcDot1agCfmMepTransmitLtmStatus TruthValue, rcDot1agCfmMepTransmitLtmFlags BITS, rcDot1agCfmMepTransmitLtmTargetMacAddress MacAddress, rcDot1agCfmMepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero, rcDot1agCfmMepTransmitLtmTargetIsMepId TruthValue, rcDot1agCfmMepTransmitLtmTtl Unsigned32, rcDot1agCfmMepTransmitLtmResult TruthValue, rcDot1agCfmMepTransmitLtmSeqNumber Unsigned32, rcDot1agCfmMepTransmitLtmEgressIdentifier OCTET STRING, rcDot1agCfmMepRowStatus RowStatus } rcDot1agCfmMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point (3.18). MEP Identifier is also known as the MEPID. " REFERENCE "802.1ag clauses 3.18, 19.2 and 12.14.7" ::= { rcDot1agCfmMepEntry 1 } rcDot1agCfmMepIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL set this variable to 0. " REFERENCE "802.1ag clause 12.14.7.1.3:b" ::= { rcDot1agCfmMepEntry 2 } rcDot1agCfmMepDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which the MEP faces on the Bridge port." REFERENCE "802.1ag clauses 12.14.7.1.3:c and 19.2" ::= { rcDot1agCfmMepEntry 3 } rcDot1agCfmMepPrimaryVid OBJECT-TYPE SYNTAX Unsigned32(0..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or that the MEP's MA is associated with no VID." REFERENCE "802.1ag clauses 12.14.7.1.3:d" DEFVAL { 0 } ::= { rcDot1agCfmMepEntry 4 } rcDot1agCfmMepActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning." REFERENCE "802.1ag clauses 12.14.7.1.3:e and 20.9.1" DEFVAL { false } ::= { rcDot1agCfmMepEntry 5 } rcDot1agCfmMepFngState OBJECT-TYPE SYNTAX Dot1agCfmFngState MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the MEP Fault Notification Generator State Machine. " REFERENCE "802.1ag clauses 12.14.7.1.3:f and 20.35" DEFVAL { fngReset } ::= { rcDot1agCfmMepEntry 6 } rcDot1agCfmMepCciEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to true, the MEP will generate CCM messages." REFERENCE "802.1ag clauses 12.14.7.1.3:g and 20.10.1" DEFVAL { false } ::= { rcDot1agCfmMepEntry 7 } rcDot1agCfmMepCcmLtmPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for this variable from the priority regeneration table by extracting the highest priority value in this table on this MEPs bridge port. (1 is lowest, then 2, then 0, then 3-7). " REFERENCE "802.1ag clause 12.14.7.1.3:h" ::= { rcDot1agCfmMepEntry 8 } rcDot1agCfmMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MEP." REFERENCE "802.1ag clause 12.14.7.1.3:i and 19.4" ::= { rcDot1agCfmMepEntry 9 } rcDot1agCfmMepLowPrDef OBJECT-TYPE SYNTAX Dot1agCfmLowestAlarmPri MAX-ACCESS read-create STATUS current DESCRIPTION "An integer value specifying the lowest priority defect that is allowed to generate fault alarm. " REFERENCE "802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1" DEFVAL { macRemErrXcon } ::= { rcDot1agCfmMepEntry 10} rcDot1agCfmMepFngAlarmTime OBJECT-TYPE SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). " REFERENCE "802.1ag clauses 12.14.7.1.3:l and 20.33.3" DEFVAL { 250 } ::= { rcDot1agCfmMepEntry 11 } rcDot1agCfmMepFngResetTime OBJECT-TYPE SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects must be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s). " REFERENCE "802.1ag clauses 12.14.7.1.3:m and 20.33.4" DEFVAL { 1000 } ::= { rcDot1agCfmMepEntry 12 } rcDot1agCfmMepHighestPrDefect OBJECT-TYPE SYNTAX Dot1agCfmHighestDefectPri MAX-ACCESS read-only STATUS current DESCRIPTION "The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. " REFERENCE "802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1" ::= { rcDot1agCfmMepEntry 13 } rcDot1agCfmMepDefects OBJECT-TYPE SYNTAX Dot1agCfmMepDefects MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4) " REFERENCE ".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q, 12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5, 20.33.6, 20.33.7." ::= { rcDot1agCfmMepEntry 14 } rcDot1agCfmMepErrorCcmLastFailure OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last-received CCM that triggered an DefErrorCCM fault." REFERENCE "802.1ag clauses 12.14.7.1.3:t and 20.21.2" ::= { rcDot1agCfmMepEntry 15 } rcDot1agCfmMepXconCcmLastFailure OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last-received CCM that triggered a DefXconCCM fault." REFERENCE "802.1ag clauses 12.14.7.1.3:u and 20.23.2" ::= { rcDot1agCfmMepEntry 16 } rcDot1agCfmMepCcmSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out-of-sequence CCMs received from all remote MEPs. " REFERENCE "802.1ag clauses 12.14.7.1.3:v and 20.16.12" ::= { rcDot1agCfmMepEntry 17 } rcDot1agCfmMepCciSentCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { rcDot1agCfmMepEntry 18 } rcDot1agCfmMepNextLbmTransId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. " REFERENCE "802.1ag clauses 12.14.7.1.3:x and 20.28.2" ::= { rcDot1agCfmMepEntry 19 } rcDot1agCfmMepLbrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, in-order Loopback Replies received." REFERENCE "802.1ag clause 12.14.7.1.3:y and 20.31.1" ::= { rcDot1agCfmMepEntry 20 } rcDot1agCfmMepLbrInOutOfOrder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of valid, out-of-order Loopback Replies received. " REFERENCE "802.1ag clause 12.14.7.1.3:z and 20.31.1" ::= { rcDot1agCfmMepEntry 21 } rcDot1agCfmMepLbrBadMsdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). " REFERENCE "802.1ag clause 12.14.7.1.3:aa 20.2.3" ::= { rcDot1agCfmMepEntry 22} rcDot1agCfmMepLtmNextSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. " REFERENCE "802.1ag clause 12.14.7.1.3:ab and 20.36.1" ::= { rcDot1agCfmMepEntry 23 } rcDot1agCfmMepUnexpLtrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unexpected LTRs received (20.39.1). " REFERENCE "802.1ag clause 12.14.7.1.3:ac 20.39.1" ::= { rcDot1agCfmMepEntry 24 } rcDot1agCfmMepLbrOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Loopback Replies transmitted." REFERENCE "802.1ag clause 12.14.7.1.3:ad and 20.26.2" ::= { rcDot1agCfmMepEntry 25 } rcDot1agCfmMepTransmitLbmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted." DEFVAL { true } ::= { rcDot1agCfmMepEntry 26 } rcDot1agCfmMepTransmitLbmDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitLbmDestIsMepId is 'false'. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= { rcDot1agCfmMepEntry 27 } rcDot1agCfmMepTransmitLbmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the column rcDot1agCfmMepTransmitLbmDestIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= { rcDot1agCfmMepEntry 28 } rcDot1agCfmMepTransmitLbmDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= {rcDot1agCfmMepEntry 29 } rcDot1agCfmMepTransmitLbmMessages OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of Loopback messages to be transmitted." REFERENCE "802.1ag clause 12.14.7.3.2:c" DEFVAL { 1 } ::= {rcDot1agCfmMepEntry 30 } rcDot1agCfmMepTransmitLbmDataTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1500)) MAX-ACCESS read-create STATUS current DESCRIPTION "An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. " REFERENCE "802.1ag clause 12.14.7.3.2:d" ::= { rcDot1agCfmMepEntry 31 } rcDot1agCfmMepTransmitLbmVlanPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. " REFERENCE "802.1ag clause 12.14.7.3.2:e" ::= { rcDot1agCfmMepEntry 32 } rcDot1agCfmMepTransmitLbmVlanDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. " REFERENCE "802.1ag clause 12.14.7.3.2:e" DEFVAL { true } ::= { rcDot1agCfmMepEntry 33 } rcDot1agCfmMepTransmitLbmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. " REFERENCE "802.1ag clause 12.14.7.3.3:a" DEFVAL { true } ::= { rcDot1agCfmMepEntry 34 } rcDot1agCfmMepTransmitLbmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Loopback Transaction Identifier (rcDot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if rcDot1agCfmMepTransmitLbmResultOK is false. " REFERENCE "802.1ag clause 12.14.7.3.3:a" ::= { rcDot1agCfmMepEntry 35 } rcDot1agCfmMepTransmitLtmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine." DEFVAL { true } ::= { rcDot1agCfmMepEntry 36 } rcDot1agCfmMepTransmitLtmFlags OBJECT-TYPE SYNTAX BITS { useFDBonly (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "The flags field for LTMs transmitted by the MEP." REFERENCE "802.1ag clause 12.14.7.4.2:b and 20.37.1" DEFVAL { {useFDBonly } } ::= { rcDot1agCfmMepEntry 37 } rcDot1agCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitLtmTargetIsMepId is 'false'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { rcDot1agCfmMepEntry 38 } rcDot1agCfmMepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column rcDot1agCfmMepTransmitLtmTargetIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { rcDot1agCfmMepEntry 39 } rcDot1agCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { rcDot1agCfmMepEntry 40 } rcDot1agCfmMepTransmitLtmTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value returned in the LTR is one less than that received in the LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next hop, and if 0, no LTR is generated. " REFERENCE "802.1ag clause 12.14.7.4.2:d and 21.8.4" DEFVAL {64} ::= { rcDot1agCfmMepEntry 41 } rcDot1agCfmMepTransmitLtmResult OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent" REFERENCE "802.1ag clause 12.14.7.4.3:a" DEFVAL { true } ::= { rcDot1agCfmMepEntry 42 } rcDot1agCfmMepTransmitLtmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LTM Transaction Identifier (rcDot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if rcDot1agCfmMepTransmitLtmResult is false. " REFERENCE "802.1ag clause 12.14.7.4.3:a" ::= { rcDot1agCfmMepEntry 43 } rcDot1agCfmMepTransmitLtmEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address unique to the system in which the MEP Linktrace Initiator or Linktrace Responder resides. The high-order two octets contain a value sufficient to uniquely identify the MEP Linktrace Initiator or Linktrace Responder within that system. For most Bridges, the address of any MAC attached to the Bridge will suffice for the low-order six octets, and 0 for the high-order octets. In some situations, e.g., if multiple virtual Bridges utilizing emulated LANs are implemented in a single physical system, the high-order two octets can be used to differentiate among the transmitting entities. The value returned is undefined if rcDot1agCfmMepTransmitLtmResult is false. " REFERENCE "802.1ag clause 12.14.7.4.3:b and 21.8.8" ::= { rcDot1agCfmMepEntry 44 } rcDot1agCfmMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { rcDot1agCfmMepEntry 45 } -- ****************************************************************** -- The Linktrace Reply Table -- ****************************************************************** rcDot1agCfmLtrTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " REFERENCE "802.1ag clause 12.14.7.5" ::= { rcDot1agCfmMep 2 } rcDot1agCfmLtrEntry OBJECT-TYPE SYNTAX RcDot1agCfmLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Linktrace Reply table entry." INDEX { rcDot1agCfmMdIndex, rcDot1agCfmMaIndex, rcDot1agCfmMepIdentifier, rcDot1agCfmLtrSeqNumber, rcDot1agCfmLtrReceiveOrder } ::= { rcDot1agCfmLtrTable 1 } RcDot1agCfmLtrEntry ::= SEQUENCE { rcDot1agCfmLtrSeqNumber Unsigned32, rcDot1agCfmLtrReceiveOrder Unsigned32, rcDot1agCfmLtrTtl Unsigned32, rcDot1agCfmLtrForwarded TruthValue, rcDot1agCfmLtrTerminalMep TruthValue, rcDot1agCfmLtrLastEgressIdentifier OCTET STRING, rcDot1agCfmLtrNextEgressIdentifier OCTET STRING, rcDot1agCfmLtrRelay Dot1agCfmRelayActionFieldValue, rcDot1agCfmLtrChassisIdSubtype LldpChassisIdSubtype, rcDot1agCfmLtrChassisId LldpChassisId, rcDot1agCfmLtrManAddressDomain TDomain, rcDot1agCfmLtrManAddress TAddress, rcDot1agCfmLtrIngress Dot1agCfmIngressActionFieldValue, rcDot1agCfmLtrIngressMac MacAddress, rcDot1agCfmLtrIngressPortIdSubtype LldpPortIdSubtype, rcDot1agCfmLtrIngressPortId LldpPortId, rcDot1agCfmLtrEgress Dot1agCfmEgressActionFieldValue, rcDot1agCfmLtrEgressMac MacAddress, rcDot1agCfmLtrEgressPortIdSubtype LldpPortIdSubtype, rcDot1agCfmLtrEgressPortId LldpPortId, rcDot1agCfmLtrOrganizationSpecificTlv OCTET STRING } rcDot1agCfmLtrSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. " REFERENCE "802.1ag clause 12.14.7.5.2:b" ::= { rcDot1agCfmLtrEntry 1} rcDot1agCfmLtrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. rcDot1agCfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. " REFERENCE "802.1ag clause 12.14.7.5.2:c" ::= { rcDot1agCfmLtrEntry 2 } rcDot1agCfmLtrTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "TTL field value for a returned LTR." REFERENCE "802.1ag clause 12.14.7.5 and 20.36.2.2" ::= { rcDot1agCfmLtrEntry 3 } rcDot1agCfmLtrForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. " REFERENCE "802.1ag clauses 12.14.7.5.3:c and 20.36.2.1" ::= { rcDot1agCfmLtrEntry 4 } rcDot1agCfmLtrTerminalMep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. " REFERENCE "802.1ag clauses 12.14.7.5.3:d and 20.36.2.1" ::= { rcDot1agCfmLtrEntry 5 } rcDot1agCfmLtrLastEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. " REFERENCE "802.1ag clauses 12.14.7.5.3:e and 20.36.2.3" ::= { rcDot1agCfmLtrEntry 6 } rcDot1agCfmLtrNextEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, i.e., any value can be transmitted, and the field is ignored by the receiver. " REFERENCE "802.1ag clauses 12.14.7.5.3:f and 20.36.2.4" ::= { rcDot1agCfmLtrEntry 7 } rcDot1agCfmLtrRelay OBJECT-TYPE SYNTAX Dot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "Value returned in the Relay Action field." REFERENCE "802.1ag clauses 12.14.7.5.3:g and 20.36.2.5" ::= { rcDot1agCfmLtrEntry 8 } rcDot1agCfmLtrChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the rcDot1agCfmLtrChassisId has a length of 0." REFERENCE "802.1ag clauses 12.14.7.5.3:h and 21.5.3.2" ::= { rcDot1agCfmLtrEntry 9 } rcDot1agCfmLtrChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the rcDot1agCfmLtrChassisIdSubtype object. " REFERENCE "802.1ag clauses 12.14.7.5.3:i and 21.5.3.3" ::= { rcDot1agCfmLtrEntry 10 } rcDot1agCfmLtrManAddressDomain OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The TDomain that identifies the type and format of the related rcDot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the LTR. Received in the LTR Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object rcDot1agCfmMepDbManAddress must have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.5.3:j, 21.5.3.5, 21.9.6" ::= { rcDot1agCfmLtrEntry 11 } rcDot1agCfmLtrManAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object rcDot1agCfmLtrManAddressDomain contains the value 'zeroDotZero', this object rcDot1agCfmLtrManAddress must have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.5.3:j, 21.5.3.7, 21.9.6" ::= { rcDot1agCfmLtrEntry 12 } rcDot1agCfmLtrIngress OBJECT-TYPE SYNTAX Dot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM." REFERENCE "802.1ag clauses 12.14.7.5.3:k and 20.36.2.6" ::= { rcDot1agCfmLtrEntry 13 } rcDot1agCfmLtrIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field. If the rcDot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:l and 20.36.2.7" ::= { rcDot1agCfmLtrEntry 14 } rcDot1agCfmLtrIngressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the Ingress Port ID. If the rcDot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:m and 20.36.2.8" ::= { rcDot1agCfmLtrEntry 15 } rcDot1agCfmLtrIngressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the rcDot1agCfmLtrIngressPortIdSubtype object. If the rcDot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:n and 20.36.2.9" ::= { rcDot1agCfmLtrEntry 16 } rcDot1agCfmLtrEgress OBJECT-TYPE SYNTAX Dot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM." REFERENCE "802.1ag clauses 12.14.7.5.3:o and 20.36.2.10" ::= { rcDot1agCfmLtrEntry 17 } rcDot1agCfmLtrEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field. If the rcDot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:p and 20.36.2.11" ::= { rcDot1agCfmLtrEntry 18 } rcDot1agCfmLtrEgressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the egress Port ID. If the rcDot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:q and 20.36.2.12" ::= { rcDot1agCfmLtrEntry 19 } rcDot1agCfmLtrEgressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the rcDot1agCfmLtrEgressPortIdSubtype object. If the rcDot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:r and 20.36.2.13" ::= { rcDot1agCfmLtrEntry 20 } rcDot1agCfmLtrOrganizationSpecificTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0|4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "802.1ag clauses 12.14.7.5.3:s, 21.5.2" ::= { rcDot1agCfmLtrEntry 21 } -- ****************************************************************** -- The MEP Database Table -- ****************************************************************** rcDot1agCfmMepDbTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDot1agCfmMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " REFERENCE "802.1ag clause 19.2.15" ::= { rcDot1agCfmMep 3 } rcDot1agCfmMepDbEntry OBJECT-TYPE SYNTAX RcDot1agCfmMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database table entry." INDEX { rcDot1agCfmMdIndex, rcDot1agCfmMaIndex, rcDot1agCfmMepIdentifier, rcDot1agCfmMepDbRMepIdentifier } ::= { rcDot1agCfmMepDbTable 1 } RcDot1agCfmMepDbEntry ::= SEQUENCE { rcDot1agCfmMepDbRMepIdentifier Dot1agCfmMepId, rcDot1agCfmMepDbRMepState Dot1agCfmRemoteMepState, rcDot1agCfmMepDbRMepFailedOkTime TimeStamp, rcDot1agCfmMepDbMacAddress MacAddress, rcDot1agCfmMepDbRdi TruthValue, rcDot1agCfmMepDbPortStatusTlv Dot1agCfmPortStatus, rcDot1agCfmMepDbInterfaceStatusTlv Dot1agCfmInterfaceStatus, rcDot1agCfmMepDbChassisIdSubtype LldpChassisIdSubtype, rcDot1agCfmMepDbChassisId LldpChassisId, rcDot1agCfmMepDbManAddressDomain TDomain, rcDot1agCfmMepDbManAddress TAddress } rcDot1agCfmMepDbRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. " REFERENCE "802.1ag clause 12.14.7.6.2:b" ::= { rcDot1agCfmMepDbEntry 1 } rcDot1agCfmMepDbRMepState OBJECT-TYPE SYNTAX Dot1agCfmRemoteMepState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the remote MEP IFF State machines." REFERENCE "802.1ag clause 12.14.7.6.3:b and 20.22" ::= { rcDot1agCfmMepDbEntry 2} rcDot1agCfmMepDbRMepFailedOkTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. " REFERENCE "802.1ag clause 12.14.7.6.3:c" ::= { rcDot1agCfmMepDbEntry 3 } rcDot1agCfmMepDbMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the remote MEP." REFERENCE "802.1ag clause 12.14.7.6.3:d and 20.19.7" ::= { rcDot1agCfmMepDbEntry 4 } rcDot1agCfmMepDbRdi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. " REFERENCE "802.1ag clauses 12.14.7.6.3:e and 20.19.2" ::= { rcDot1agCfmMepDbEntry 5 } rcDot1agCfmMepDbPortStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:f and 20.19.3" DEFVAL { psNoPortStateTLV } ::= { rcDot1agCfmMepDbEntry 6} rcDot1agCfmMepDbInterfaceStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmInterfaceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:g and 20.19.4" DEFVAL { isNoInterfaceStatusTLV } ::= { rcDot1agCfmMepDbEntry 7} rcDot1agCfmMepDbChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID received in the last CCM." REFERENCE "802.1ag clauses 12.14.7.6.3:h and 21.5.3.2" ::= { rcDot1agCfmMepDbEntry 8 } rcDot1agCfmMepDbChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID. The format of this object is determined by the value of the rcDot1agCfmLtrChassisIdSubtype object. " REFERENCE "802.1ag clauses 12.14.7.6.3:h and 21.5.3.3" ::= { rcDot1agCfmMepDbEntry 9 } rcDot1agCfmMepDbManAddressDomain OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The TDomain that identifies the type and format of the related rcDot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object rcDot1agCfmMepDbManAddress must have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.6.3:h, 21.5.3.5, 21.6.7" ::= { rcDot1agCfmMepDbEntry 10 } rcDot1agCfmMepDbManAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object rcDot1agCfmMepDbManAddressDomain contains the value 'zeroDotZero', this object rcDot1agCfmMepDbManAddress must have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.6.3:h, 21.5.3.7, 21.6.7" ::= { rcDot1agCfmMepDbEntry 11 } -- ****************************************************************** -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity -- whenever a MEP loses/restores contact with one or more other MEPs. -- ****************************************************************** rcDot1agCfmFaultAlarm NOTIFICATION-TYPE OBJECTS { rcDot1agCfmMepHighestPrDefect } STATUS current DESCRIPTION "A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the rcDot1agCfmMepHighestPrDefect variable in the notification: rcDot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (rcDot1agCfmMdTable). rcDot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (rcDot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry (rcDot1agCfmMaCompTable). rcDot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (rcDot1agCfmMepTable). " REFERENCE "802.1ag clause 12.14.7.7" ::= { rcDot1agNotifications 1 } -- ****************************************************************** -- IEEE 802.1ag MIB Module - Conformance Information -- ****************************************************************** rcDot1agCfmCompliances OBJECT IDENTIFIER ::= { rcDot1agCfmConformance 1 } rcDot1agCfmGroups OBJECT IDENTIFIER ::= { rcDot1agCfmConformance 2 } -- ****************************************************************** -- Units of conformance -- ****************************************************************** rcDot1agCfmStackGroup OBJECT-GROUP OBJECTS { rcDot1agCfmStackMdIndex, rcDot1agCfmStackMaIndex, rcDot1agCfmStackMepId, rcDot1agCfmStackMacAddress } STATUS current DESCRIPTION "Objects for the Stack group." ::= { rcDot1agCfmGroups 1 } rcDot1agCfmDefaultMdGroup OBJECT-GROUP OBJECTS { rcDot1agCfmDefaultMdDefLevel, rcDot1agCfmDefaultMdDefMhfCreation, rcDot1agCfmDefaultMdDefIdPermission, rcDot1agCfmDefaultMdStatus, rcDot1agCfmDefaultMdLevel, rcDot1agCfmDefaultMdMhfCreation, rcDot1agCfmDefaultMdIdPermission } STATUS current DESCRIPTION "Objects for the Default MD Level group." ::= { rcDot1agCfmGroups 2 } rcDot1agCfmVlanIdGroup OBJECT-GROUP OBJECTS { rcDot1agCfmVlanPrimaryVid, rcDot1agCfmVlanRowStatus } STATUS current DESCRIPTION "Objects for the VLAN ID group." ::= { rcDot1agCfmGroups 3 } rcDot1agCfmConfigErrorListGroup OBJECT-GROUP OBJECTS { rcDot1agCfmConfigErrorListErrorType } STATUS current DESCRIPTION "Objects for the CFM Configuration Error List Group." ::= {rcDot1agCfmGroups 4 } rcDot1agCfmMdGroup OBJECT-GROUP OBJECTS { rcDot1agCfmMdTableNextIndex, rcDot1agCfmMdName, rcDot1agCfmMdFormat, rcDot1agCfmMdMdLevel, rcDot1agCfmMdMhfCreation, rcDot1agCfmMdMhfIdPermission, rcDot1agCfmMdMaNextIndex, rcDot1agCfmMdRowStatus } STATUS current DESCRIPTION "Objects for the Maintenance Domain Group." ::={rcDot1agCfmGroups 5 } rcDot1agCfmMaGroup OBJECT-GROUP OBJECTS { rcDot1agCfmMaNetFormat, rcDot1agCfmMaNetName, rcDot1agCfmMaNetCcmInterval, rcDot1agCfmMaNetRowStatus, rcDot1agCfmMaCompPrimaryVlanId, rcDot1agCfmMaCompMhfCreation, rcDot1agCfmMaCompIdPermission, rcDot1agCfmMaCompRowStatus, rcDot1agCfmMaCompNumberOfVids, rcDot1agCfmMaMepListRowStatus } STATUS current DESCRIPTION "Objects for the MA group." ::= { rcDot1agCfmGroups 6 } rcDot1agCfmMepGroup OBJECT-GROUP OBJECTS { rcDot1agCfmMepIfIndex, rcDot1agCfmMepDirection, rcDot1agCfmMepPrimaryVid, rcDot1agCfmMepActive, rcDot1agCfmMepFngState, rcDot1agCfmMepCciEnabled, rcDot1agCfmMepCcmLtmPriority, rcDot1agCfmMepMacAddress, rcDot1agCfmMepLowPrDef, rcDot1agCfmMepFngAlarmTime, rcDot1agCfmMepFngResetTime, rcDot1agCfmMepHighestPrDefect, rcDot1agCfmMepDefects, rcDot1agCfmMepErrorCcmLastFailure, rcDot1agCfmMepXconCcmLastFailure, rcDot1agCfmMepCcmSequenceErrors, rcDot1agCfmMepCciSentCcms, rcDot1agCfmMepNextLbmTransId, rcDot1agCfmMepLbrIn, rcDot1agCfmMepLbrInOutOfOrder, rcDot1agCfmMepLbrBadMsdu, rcDot1agCfmMepLtmNextSeqNumber, rcDot1agCfmMepUnexpLtrIn, rcDot1agCfmMepLbrOut, rcDot1agCfmMepTransmitLbmStatus, rcDot1agCfmMepTransmitLbmDestMacAddress, rcDot1agCfmMepTransmitLbmDestMepId, rcDot1agCfmMepTransmitLbmDestIsMepId, rcDot1agCfmMepTransmitLbmMessages, rcDot1agCfmMepTransmitLbmDataTlv, rcDot1agCfmMepTransmitLbmVlanPriority, rcDot1agCfmMepTransmitLbmVlanDropEnable, rcDot1agCfmMepTransmitLbmResultOK, rcDot1agCfmMepTransmitLbmSeqNumber, rcDot1agCfmMepTransmitLtmStatus, rcDot1agCfmMepTransmitLtmFlags, rcDot1agCfmMepTransmitLtmTargetMacAddress, rcDot1agCfmMepTransmitLtmTargetMepId, rcDot1agCfmMepTransmitLtmTargetIsMepId, rcDot1agCfmMepTransmitLtmTtl, rcDot1agCfmMepTransmitLtmResult, rcDot1agCfmMepTransmitLtmSeqNumber, rcDot1agCfmMepTransmitLtmEgressIdentifier, rcDot1agCfmMepRowStatus, rcDot1agCfmLtrForwarded, rcDot1agCfmLtrRelay, rcDot1agCfmLtrChassisIdSubtype, rcDot1agCfmLtrChassisId, rcDot1agCfmLtrManAddress, rcDot1agCfmLtrManAddressDomain, rcDot1agCfmLtrIngress, rcDot1agCfmLtrIngressMac, rcDot1agCfmLtrIngressPortIdSubtype, rcDot1agCfmLtrIngressPortId, rcDot1agCfmLtrEgress, rcDot1agCfmLtrEgressMac, rcDot1agCfmLtrEgressPortIdSubtype, rcDot1agCfmLtrEgressPortId, rcDot1agCfmLtrTerminalMep, rcDot1agCfmLtrLastEgressIdentifier, rcDot1agCfmLtrNextEgressIdentifier, rcDot1agCfmLtrTtl, rcDot1agCfmLtrOrganizationSpecificTlv } STATUS current DESCRIPTION "Objects for the MEP group." ::= { rcDot1agCfmGroups 7 } rcDot1agCfmMepDbGroup OBJECT-GROUP OBJECTS { rcDot1agCfmMepDbRMepState, rcDot1agCfmMepDbRMepFailedOkTime, rcDot1agCfmMepDbMacAddress, rcDot1agCfmMepDbRdi, rcDot1agCfmMepDbPortStatusTlv, rcDot1agCfmMepDbInterfaceStatusTlv, rcDot1agCfmMepDbChassisIdSubtype, rcDot1agCfmMepDbChassisId, rcDot1agCfmMepDbManAddressDomain, rcDot1agCfmMepDbManAddress } STATUS current DESCRIPTION "Objects for the MEP group." ::= { rcDot1agCfmGroups 8 } rcDot1agCfmNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { rcDot1agCfmFaultAlarm } STATUS current DESCRIPTION "Objects for the Notifications group." ::= { rcDot1agCfmGroups 9 } -- ****************************************************************** -- MIB Module Compliance statements -- ****************************************************************** rcDot1agCfmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the CFM MIB module." MODULE MANDATORY-GROUPS { rcDot1agCfmStackGroup, rcDot1agCfmDefaultMdGroup, rcDot1agCfmConfigErrorListGroup, rcDot1agCfmMdGroup, rcDot1agCfmMaGroup, rcDot1agCfmMepGroup, rcDot1agCfmMepDbGroup, rcDot1agCfmNotificationsGroup } GROUP rcDot1agCfmVlanIdGroup DESCRIPTION "The VLAN ID group is optional." OBJECT rcDot1agCfmMepLbrBadMsdu MIN-ACCESS not-accessible DESCRIPTION "The rcDot1agCfmMepLbrBadMsdu variable is optional. It must not be present if the system cannot compare a received LBR to the corresponding LBM." OBJECT rcDot1agCfmMdRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." OBJECT rcDot1agCfmMaNetRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." OBJECT rcDot1agCfmMaCompRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." OBJECT rcDot1agCfmVlanRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." OBJECT rcDot1agCfmMaMepListRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." OBJECT rcDot1agCfmMepRowStatus SYNTAX RowStatus DESCRIPTION "Support for createAndWait is not required." ::= { rcDot1agCfmCompliances 1 } END