-- ***************************************************************** -- QTECH-BFD-MIB.mib: Qtech BFD MIB file -- -- 2012-12-26 Wangxiaoyang@qtech.com.cn -- -- Copyright (c) 2012 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-BFD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, Integer32, Unsigned32, Counter32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB qtechMgmt FROM QTECH-SMI; -- TEXTUAL-CONVENTION QtechBfdSessIndexTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An index used to uniquely identify BFD sessions." SYNTAX Unsigned32 (1..4294967295) QtechBfdIntervalTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The BFD interval in microseconds." SYNTAX Unsigned32 (0..4294967295) QtechBfdMultiplierTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The BFD failure detection multiplier." SYNTAX Unsigned32 (1..255) QtechBfdDiagTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A common BFD diagnostic code." SYNTAX INTEGER { noDiagnostic(0), controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8) } QtechBfdSessTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD session type" REFERENCE "Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2010. Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop), RFC 5881, June 2010. Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD) for Multihop Paths, RFC 5883, June 2010." SYNTAX INTEGER { singleHop(1), multiHopTotallyArbitraryPaths(2), multiHopOutOfBandSignaling(3), multiHopUnidirectionalLinks(4), multiPointHead(5), multiPointTail(6) } QtechBfdSessOperModeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD session operating mode" REFERENCE "Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2010." SYNTAX INTEGER { asyncModeWEchoFunction(1), asynchModeWOEchoFunction(2), demandModeWEchoFunction(3), demandModeWOEchoFunction(4) } QtechBfdCtrlDestPortNumberTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "UDP destination port number of BFD control packets. 3784 represents single hop BFD session. 4784 represents multi hop BFD session. However, syntax is left open to wider range of values purposely for two reasons: 1. implementation uses non-compliant port number for valid proprietary reason. 2. potential future extension drafts." REFERENCE "Use of port 3784 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop), RFC 5881, June 2010. Use of port 4784 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop), RFC 5881, June 2010." SYNTAX Unsigned32 (0..65535) QtechBfdCtrlSourcePortNumberTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "UDP source port number of BFD control packets. However, syntax is left open to wider range of values purposely for two reasons: 1. implementation uses non-compliant port number for valid proprietary reason. 2. potential future extension drafts." REFERENCE "Port 49152..65535 (RFC5881)" SYNTAX Unsigned32 (0..65535) QtechBfdSessStateTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD session state. State failing(5) is only applicable if corresponding session is running in BFD version 0." REFERENCE "RFC 5880 - Bidirectional Forwarding Detection (BFD), Katz, D., Ward, D., June 2010." SYNTAX INTEGER { adminDown(1), down(2), init(3), up(4), failing(5) } QtechBfdSessAuthenticationTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD authentication type" REFERENCE "Sections 4.2 - 4.4 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2010." SYNTAX INTEGER { noAuthentication(-1), reserved(0), simplePassword(1), keyedMD5(2), meticulousKeyedMD5(3), keyedSHA1(4), meticulousKeyedSHA1(5) } QtechBfdSessionAuthenticationKeyTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x " STATUS current DESCRIPTION "BFD authentication key type. A QtechBfdSessionAuthenticationKeyTC is always interpreted within the context of an QtechBfdSessAuthenticationTypeTC value. Every usage of the QtechBfdSessionAuthenticationTypeTC textual convention is required to specify the the QtechBfdSessionAuthenticationKeyTC object that provides the context. It is suggested that the QtechBfdSessionAuthentcationTypeTC object be logically registered before the object(s) that use the QtechBfdSessionAuthenticationKeyTC textual convention, if they appear in the same logical row. The value of a QtechBfdSessionAuthenticationKeyTC must always be consistent with the value of the associated QtechBfdSessionAuthencationTypeTC object. Attempts to set a QtechBfdSessionAuthenticationKeyTC object to a value inconsistent with the associated QtechBfdSessionAuthenticationTypeTC must fail with an inconsistentValue error. The following size constraints for a QtechBfdSessionAuthenticationKeyTC object are defined for the associated QtechBfdSessionAuthenticationTypeTC values show below: noAuthentication(-1): SIZE(0) reserved(0): SIZE(0) simplePassword(1): SIZE(1..16) keyedMD5(2): SIZE(16) meticulousKeyedMD5(3): SIZE(16) keyedSHA1(4): SIZE(20) meticulousKeyedSHA1(5): SIZE(20) When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate." REFERENCE "RFC5880, Sections 4.2 - 4.4" SYNTAX OCTET STRING(SIZE(0..252)) -- qtech bfd mib qtechBfdMIB MODULE-IDENTITY LAST-UPDATED "201204141200Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech BFD mibs." REVISION "201204141200Z" DESCRIPTION "Initial version of this MIB module." -- RFC Ed.: RFC-editor pls fill in xxxx ::= { qtechMgmt 48 } -- RFC Ed.: assigned by IANA, see section 7.1 for details -- Top level components of this MIB module. qtechBfdNotifications OBJECT IDENTIFIER ::= { qtechBfdMIB 0 } qtechBfdObjects OBJECT IDENTIFIER ::= { qtechBfdMIB 1 } qtechBfdConformance OBJECT IDENTIFIER ::= { qtechBfdMIB 2 } qtechBfdScalarObjects OBJECT IDENTIFIER ::= { qtechBfdObjects 1 } -- BFD General Variables -- These parameters apply globally to the Systems' -- BFD Process. qtechBfdAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The global administrative status of BFD in this device. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disables it on all interfaces." DEFVAL { enabled } ::= { qtechBfdScalarObjects 1 } qtechBfdSessNotificationsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is set to true(1), then it enables the emission of qtechBfdSessUp and qtechBfdSessDown notifications; otherwise these notifications are not emitted." REFERENCE "See also RFC3413 for explanation that notifications are under the ultimate control of the MIB modules in this document." DEFVAL { false } ::= { qtechBfdScalarObjects 2 } -- BFD Session Table -- The BFD Session Table specifies BFD session specific -- information. qtechBfdSessTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Table describes the BFD sessions." REFERENCE "Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." ::= { qtechBfdObjects 2 } qtechBfdSessEntry OBJECT-TYPE SYNTAX QtechBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Entry describes BFD session." INDEX { qtechBfdSessIndex } ::= { qtechBfdSessTable 1 } QtechBfdSessEntry ::= SEQUENCE { qtechBfdSessIndex QtechBfdSessIndexTC, qtechBfdSessVersionNumber Unsigned32, qtechBfdSessType QtechBfdSessTypeTC, qtechBfdSessDiscriminator Unsigned32, qtechBfdSessRemoteDiscr Unsigned32, qtechBfdSessDestinationUdpPort QtechBfdCtrlDestPortNumberTC, qtechBfdSessSourceUdpPort QtechBfdCtrlSourcePortNumberTC, qtechBfdSessEchoSourceUdpPort InetPortNumber, qtechBfdSessAdminStatus INTEGER, qtechBfdSessState QtechBfdSessStateTC, qtechBfdSessRemoteHeardFlag TruthValue, qtechBfdSessDiag QtechBfdDiagTC, qtechBfdSessOperMode QtechBfdSessOperModeTC, qtechBfdSessDemandModeDesiredFlag TruthValue, qtechBfdSessControlPlaneIndepFlag TruthValue, qtechBfdSessMultipointFlag TruthValue, qtechBfdSessInterface InterfaceIndexOrZero, qtechBfdSessSrcAddrType InetAddressType, qtechBfdSessSrcAddr InetAddress, qtechBfdSessDstAddrType InetAddressType, qtechBfdSessDstAddr InetAddress, qtechBfdSessGTSM TruthValue, qtechBfdSessGTSMTTL Unsigned32, qtechBfdSessDesiredMinTxInterval QtechBfdIntervalTC, qtechBfdSessReqMinRxInterval QtechBfdIntervalTC, qtechBfdSessReqMinEchoRxInterval QtechBfdIntervalTC, qtechBfdSessDetectMult QtechBfdMultiplierTC, qtechBfdSessNegotiatedInterval QtechBfdIntervalTC, qtechBfdSessNegotiatedEchoInterval QtechBfdIntervalTC, qtechBfdSessNegotiatedDetectMult QtechBfdMultiplierTC, qtechBfdSessAuthPresFlag TruthValue, qtechBfdSessAuthenticationType QtechBfdSessAuthenticationTypeTC, qtechBfdSessAuthenticationKeyID Integer32, qtechBfdSessAuthenticationKey QtechBfdSessionAuthenticationKeyTC, qtechBfdSessStorageType StorageType, qtechBfdSessRowStatus RowStatus } qtechBfdSessIndex OBJECT-TYPE SYNTAX QtechBfdSessIndexTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains an index used to represent a unique BFD session on this device." ::= { qtechBfdSessEntry 1 } qtechBfdSessVersionNumber OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The version number of the BFD protocol that this session is running in. Write access is available for this object to provide ability to set desired version for this BFD session." REFERENCE "Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." DEFVAL { 1 } ::= { qtechBfdSessEntry 2 } qtechBfdSessType OBJECT-TYPE SYNTAX QtechBfdSessTypeTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of this BFD session." ::= { qtechBfdSessEntry 3 } qtechBfdSessDiscriminator OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the local discriminator for this BFD session, used to uniquely identify it." ::= { qtechBfdSessEntry 4 } qtechBfdSessRemoteDiscr OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the session discriminator chosen by the remote system for this BFD session. The value may be zero(0) if the remote discriminator is not yet known or if the session is in the down or adminDown(1) state." REFERENCE "Section 6.8.6, from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." ::= { qtechBfdSessEntry 5 } qtechBfdSessDestinationUdpPort OBJECT-TYPE SYNTAX QtechBfdCtrlDestPortNumberTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the destination UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) state." DEFVAL { 0 } ::= { qtechBfdSessEntry 6 } qtechBfdSessSourceUdpPort OBJECT-TYPE SYNTAX QtechBfdCtrlSourcePortNumberTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the source UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) state. Upon creation of a new BFD session via this MIB, the value of zero(0) specified would permit the implementation to chose its own source port number." DEFVAL { 0 } ::= { qtechBfdSessEntry 7 } qtechBfdSessEchoSourceUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the source UDP port number used for this BFD session's echo packets. The value may be zero(0) if the session is not running in the echo mode, or the session is in adminDown(1) state. Upon creation of a new BFD session via this MIB, the value of zero(0) would permit the implementation to chose its own source port number." DEFVAL { 0 } ::= { qtechBfdSessEntry 8 } qtechBfdSessAdminStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "A transition from 'stop' to 'start' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from 'start' to 'stop' will cause the BFD sesssion to be brought down to adminDown(1). Care should be used in providing write access to this object without adequate authentication." DEFVAL { 2 } ::= { qtechBfdSessEntry 9 } qtechBfdSessState OBJECT-TYPE SYNTAX QtechBfdSessStateTC MAX-ACCESS read-only STATUS current DESCRIPTION "BFD session state." DEFVAL { 2 } ::= { qtechBfdSessEntry 10 } qtechBfdSessRemoteHeardFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(2) if the local system has not received BFD packets recently (within the detection time) or if the local system is attempting to tear down the BFD session." REFERENCE "Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." DEFVAL { false } ::= { qtechBfdSessEntry 11 } qtechBfdSessDiag OBJECT-TYPE SYNTAX QtechBfdDiagTC MAX-ACCESS read-only STATUS current DESCRIPTION "A diagnostic code specifying the local system's reason for the last transition of the session from up(4) to some other state." ::= { qtechBfdSessEntry 12 } qtechBfdSessOperMode OBJECT-TYPE SYNTAX QtechBfdSessOperModeTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies current operating mode that BFD session is operating in." ::= { qtechBfdSessEntry 13 } qtechBfdSessDemandModeDesiredFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(2) if not" DEFVAL { false } ::= { qtechBfdSessEntry 14 } qtechBfdSessControlPlaneIndepFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the control plane. Otherwise, the value is set to false(2)" DEFVAL { false } ::= { qtechBfdSessEntry 15 } qtechBfdSessMultipointFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Multipoint (M) bit for this session. It is set to true(1) if Multipoint (M) bit is set to 1. Otherwise, the value is set to false(2)" DEFVAL { false } ::= { qtechBfdSessEntry 16 } qtechBfdSessInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface associated with this BFD session." ::= { qtechBfdSessEntry 17 } qtechBfdSessSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies IP address type of the source IP address of this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4) have to be supported. The value of unknown(0) is allowed only when the session is singleHop(1) and the source IP address of this BFD session is drived from the outgoing interface, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent MUST return an inconsistentValue error." ::= { qtechBfdSessEntry 18 } qtechBfdSessSrcAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the source IP address of this BFD session." ::= { qtechBfdSessEntry 19 } qtechBfdSessDstAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4) have to be supported. The value of unknown(0) is allowed only when the session is singleHop(1) and the outgoing interface is of type point-to-point, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent MUST return an inconsistentValue error." ::= { qtechBfdSessEntry 20 } qtechBfdSessDstAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the neighboring IP address which is being monitored with this BFD session." ::= { qtechBfdSessEntry 21 } qtechBfdSessGTSM OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of this object to true(1) will enable GTSM protection of the BFD session. GTSM MUST be enabled on a singleHop(1) session if no authentication is in use." REFERENCE "RFC5082, The Generalized TTL Security Mechanism (GTSM). RFC5881, Section 5" DEFVAL { false } ::= { qtechBfdSessEntry 22 } qtechBfdSessGTSMTTL OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is valid only when qtechBfdSessGTSM protection is enabled on the system. This object specifies the minimum allowed TTL for received BFD control packets. For singleHop(1) session, if GTSM protection is enabled, this object SHOULD be set to maximum TTL allowed for single hop. The value of zero(0) indicates that qtechBfdSessGTSM is disabled." REFERENCE "RFC5082, The Generalized TTL Security Mechanism (GTSM). RFC5881, Section 5" DEFVAL { 0 } ::= { qtechBfdSessEntry 23 } qtechBfdSessDesiredMinTxInterval OBJECT-TYPE SYNTAX QtechBfdIntervalTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used." REFERENCE "Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." ::= { qtechBfdSessEntry 24 } qtechBfdSessReqMinRxInterval OBJECT-TYPE SYNTAX QtechBfdIntervalTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets." REFERENCE "Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." ::= { qtechBfdSessEntry 25 } qtechBfdSessReqMinEchoRxInterval OBJECT-TYPE SYNTAX QtechBfdIntervalTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. Value must be zero(0) if this is a multihop BFD session." ::= { qtechBfdSessEntry 26 } qtechBfdSessDetectMult OBJECT-TYPE SYNTAX QtechBfdMultiplierTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Detect time multiplier." ::= { qtechBfdSessEntry 27 } qtechBfdSessNegotiatedInterval OBJECT-TYPE SYNTAX QtechBfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Control packets." ::= { qtechBfdSessEntry 28 } qtechBfdSessNegotiatedEchoInterval OBJECT-TYPE SYNTAX QtechBfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD echo packets. Value is expected to be zero if the sessions is not running in echo mode." ::= { qtechBfdSessEntry 29 } qtechBfdSessNegotiatedDetectMult OBJECT-TYPE SYNTAX QtechBfdMultiplierTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Detect time multiplier." ::= { qtechBfdSessEntry 30 } qtechBfdSessAuthPresFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(2) if not." REFERENCE "Sections 4.2 - 4.4 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." DEFVAL { false } ::= { qtechBfdSessEntry 31 } qtechBfdSessAuthenticationType OBJECT-TYPE SYNTAX QtechBfdSessAuthenticationTypeTC MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as other authentication related objects are set to read-create in order to support management of a single key ID at a time, key rotation is not handled. Key update in practice must be done by atomic update using a set containing all affected objects in the same varBindList or otherwise risk the session dropping. Value -1 indicates that no authentication is in use for this session." REFERENCE "Sections 4.2 - 4.4 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." DEFVAL { -1 } ::= { qtechBfdSessEntry 32 } qtechBfdSessAuthenticationKeyID OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. When qtechBfdSessAuthPresFlag is false(2), then the value of this object MUST be -1. The value -1 indicates that no Authentication Key ID will be present in the optional BFD Authentication Section." REFERENCE "Sections 4.2 - 4.4 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." DEFVAL { -1 } ::= { qtechBfdSessEntry 33 } qtechBfdSessAuthenticationKey OBJECT-TYPE SYNTAX QtechBfdSessionAuthenticationKeyTC MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication key. When the qtechBfdSessAuthenticationType is simplePassword(1), the value of this object is the password present in the BFD packets. When the qtechBfdSessAuthentication type is one of the keyed authentication types, this value is used in the computation of the key present in the BFD authentication packet." REFERENCE "Sections 4.2 - 4.4 from from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012." ::= { qtechBfdSessEntry 34 } qtechBfdSessStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." ::= { qtechBfdSessEntry 35 } qtechBfdSessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the qtechBfdSessRowStatus and qtechBfdSessStorageType." ::= { qtechBfdSessEntry 36 } -- BFD Session Performance Table qtechBfdSessPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechBfdSessPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies BFD Session performance counters." ::= { qtechBfdObjects 3 } qtechBfdSessPerfEntry OBJECT-TYPE SYNTAX QtechBfdSessPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by a BFD-enabled node for every BFD Session. qtechBfdSessPerfDiscTime is used to indicate potential discontinuity for all counter objects in this table." AUGMENTS { qtechBfdSessEntry } ::= { qtechBfdSessPerfTable 1 } QtechBfdSessPerfEntry ::= SEQUENCE { qtechBfdSessPerfCtrlPktIn Counter32, qtechBfdSessPerfCtrlPktOut Counter32, qtechBfdSessPerfCtrlPktDrop Counter32, qtechBfdSessPerfCtrlPktDropLastTime TimeStamp, qtechBfdSessPerfEchoPktIn Counter32, qtechBfdSessPerfEchoPktOut Counter32, qtechBfdSessPerfEchoPktDrop Counter32, qtechBfdSessPerfEchoPktDropLastTime TimeStamp, qtechBfdSessUpTime TimeStamp, qtechBfdSessPerfLastSessDownTime TimeStamp, qtechBfdSessPerfLastCommLostDiag QtechBfdDiagTC, qtechBfdSessPerfSessUpCount Counter32, qtechBfdSessPerfDiscTime TimeStamp, -- High Capacity Counters qtechBfdSessPerfCtrlPktInHC Counter64, qtechBfdSessPerfCtrlPktOutHC Counter64, qtechBfdSessPerfCtrlPktDropHC Counter64, qtechBfdSessPerfEchoPktInHC Counter64, qtechBfdSessPerfEchoPktOutHC Counter64, qtechBfdSessPerfEchoPktDropHC Counter64 } -- Ed Note: should we add per-diag code counts here, qtechBfdSessPerfCtrlPktIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD control messages received for this BFD session. This value MUST be equal to the least significant 32 bits of qtechBfdSessPerfCtrlPktInHC." ::= { qtechBfdSessPerfEntry 1 } qtechBfdSessPerfCtrlPktOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD control messages sent for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of qtechBfdSessPerfCtrlPktOutHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 2 } qtechBfdSessPerfCtrlPktDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD control messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of significant 32 bits of qtechBfdSessPerfCtrlPktDropHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 3 } qtechBfdSessPerfCtrlPktDropLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which received BFD control message for this session was dropped. If no such up event exists, this object contains a zero value." ::= { qtechBfdSessPerfEntry 4 } qtechBfdSessPerfEchoPktIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of qtechBfdSessPerfEchoPktInHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 5 } qtechBfdSessPerfEchoPktOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD echo messages sent for this BFD session. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfEchoPktOutHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 6 } qtechBfdSessPerfEchoPktDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BFD echo messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfEchoPktDropHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 7 } qtechBfdSessPerfEchoPktDropLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which received BFD echo message for this session was dropped. If no such up event exists, this object contains a zero value." ::= { qtechBfdSessPerfEntry 8 } qtechBfdSessUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value." ::= { qtechBfdSessPerfEntry 9 } qtechBfdSessPerfLastSessDownTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object contains a zero value." ::= { qtechBfdSessPerfEntry 10 } qtechBfdSessPerfLastCommLostDiag OBJECT-TYPE SYNTAX QtechBfdDiagTC MAX-ACCESS read-only STATUS current DESCRIPTION "The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value." ::= { qtechBfdSessPerfEntry 11 } qtechBfdSessPerfSessUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this session has gone into the Up state since the system last rebooted." ::= { qtechBfdSessPerfEntry 12 } qtechBfdSessPerfDiscTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the specific instances associated with this BFD session of any Counter32 object contained in the BfdSessPerfTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { qtechBfdSessPerfEntry 13 } qtechBfdSessPerfCtrlPktInHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD control messages received for this BFD session. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfCtrlPktInHC if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 14 } qtechBfdSessPerfCtrlPktOutHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD control messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfCtrlPktOut if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 15 } qtechBfdSessPerfCtrlPktDropHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD control messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfCtrlPktDrop if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 16 } qtechBfdSessPerfEchoPktInHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfEchoPktIn if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 17 } qtechBfdSessPerfEchoPktOutHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD echo messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfEchoPktOut if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 18 } qtechBfdSessPerfEchoPktDropHC OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the total number of BFD echo messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of qtechBfdSessPerfEchoPktDrop if supported, and MUST do so the rules spelled out in RFC 2863." ::= { qtechBfdSessPerfEntry 19 } -- BFD Session Discriminator Mapping Table qtechBfdSessDiscMapTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechBfdSessDiscMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Discriminator Mapping Table maps a local discriminator value to associated BFD session's QtechBfdSessIndexTC used in the qtechBfdSessionTable." ::= { qtechBfdObjects 4 } qtechBfdSessDiscMapEntry OBJECT-TYPE SYNTAX QtechBfdSessDiscMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Discriminator Map Entry describes BFD session that is mapped to this QtechBfdSessIndexTC." INDEX { qtechBfdSessDiscriminator } ::= { qtechBfdSessDiscMapTable 1 } QtechBfdSessDiscMapEntry ::= SEQUENCE { qtechBfdSessDiscMapIndex QtechBfdSessIndexTC, qtechBfdSessDiscMapStorageType StorageType, qtechBfdSessDiscMapRowStatus RowStatus } qtechBfdSessDiscMapIndex OBJECT-TYPE SYNTAX QtechBfdSessIndexTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the QtechBfdSessIndexTC referred to by the indices of this row. In essence, a mapping is provided between these indexes and the QtechBfdSessTable." ::= { qtechBfdSessDiscMapEntry 1 } qtechBfdSessDiscMapStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." ::= { qtechBfdSessDiscMapEntry 2 } qtechBfdSessDiscMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the qtechBfdSessDiscMapRowStatus and qtechBfdSessDiscMapStorageType." ::= { qtechBfdSessDiscMapEntry 3 } -- BFD Session IP Mapping Table qtechBfdSessIpMapTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechBfdSessIpMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session IP Mapping Table maps given qtechBfdSessInterface, qtechBfdSessSrcAddrType, qtechBfdSessSrcAddr, qtechBfdSessDstAddrType and qtechBfdSessDstAddr to an associated BFD session's QtechBfdSessIndexTC used in the qtechBfdSessionTable." ::= { qtechBfdObjects 5 } qtechBfdSessIpMapEntry OBJECT-TYPE SYNTAX QtechBfdSessIpMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session IP Map Entry describes BFD session that is mapped to this QtechBfdSessIndexTC." INDEX { qtechBfdSessInterface, qtechBfdSessSrcAddrType, qtechBfdSessSrcAddr, qtechBfdSessDstAddrType, qtechBfdSessDstAddr } ::= { qtechBfdSessIpMapTable 1 } QtechBfdSessIpMapEntry ::= SEQUENCE { qtechBfdSessIpMapIndex QtechBfdSessIndexTC, qtechBfdSessIpMapStorageType StorageType, qtechBfdSessIpMapRowStatus RowStatus } qtechBfdSessIpMapIndex OBJECT-TYPE SYNTAX QtechBfdSessIndexTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the QtechBfdSessIndexTC referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the QtechBfdSessTable." ::= { qtechBfdSessIpMapEntry 1 } qtechBfdSessIpMapStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." ::= { qtechBfdSessIpMapEntry 2 } qtechBfdSessIpMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the qtechBfdSessIpMapRowStatus and qtechBfdSessIpMapStorageType." ::= { qtechBfdSessIpMapEntry 3 } -- Notification Configuration qtechBfdSessUp NOTIFICATION-TYPE OBJECTS { qtechBfdSessDiag, -- low range value qtechBfdSessDiag -- high range value } STATUS current DESCRIPTION "This notification is generated when the qtechBfdSessState object for one or more contiguous entries in qtechBfdSessTable are about to enter the up(4) state from some other state. The included values of qtechBfdSessDiag MUST both be set equal to this new state (i.e: up(4)). The two instances of qtechBfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For the cases where a contiguous range of sessions have transitioned into the up(4) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single qtechBfdSessEntry, then the instance identifier (and values) of the two qtechBfdSessDiag objects MUST be the identical." ::= { qtechBfdNotifications 1 } qtechBfdSessDown NOTIFICATION-TYPE OBJECTS { qtechBfdSessDiag, -- low range value qtechBfdSessDiag -- high range value } STATUS current DESCRIPTION "This notification is generated when the qtechBfdSessState object for one or more contiguous entries in qtechBfdSessTable are about to enter the down(2) or adminDown(1) states from some other state. The included values of qtechBfdSessDiag MUST both be set equal to this new state (i.e: down(2) or adminDown(1)). The two instances of qtechBfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of sessions have transitioned into the down(2) or adminDown(1) states at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single qtechBfdSessEntry, then the instance identifier (and values) of the two qtechBfdSessDiag objects MUST be the identical." ::= { qtechBfdNotifications 2 } -- Ed Note: We need to add notification for changes -- when the two ends automatically negotiate to a new detection time -- value or when detection multiplier changes. -- Module compliance. qtechBfdGroups OBJECT IDENTIFIER ::= { qtechBfdConformance 1 } qtechBfdCompliances OBJECT IDENTIFIER ::= { qtechBfdConformance 2 } -- Compliance requirement for fully compliant implementations. qtechBfdModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide full support for the BFD-MIB module. Such devices can then be monitored and also be configured using this MIB module." MODULE -- This module. MANDATORY-GROUPS { qtechBfdSessionGroup, qtechBfdSessionReadOnlyGroup, qtechBfdSessionPerfGroup, qtechBfdNotificationGroup } GROUP qtechBfdSessionPerfHCGroup DESCRIPTION "This group is mandatory for all systems that are able to support the Counter64 date type." OBJECT qtechBfdSessSrcAddrType SYNTAX InetAddressType --{ unknown(0), ipv4(1), ipv6(2), ipv6z(4) } DESCRIPTION "Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required." OBJECT qtechBfdSessSrcAddr SYNTAX InetAddress (SIZE (0|4|16|20)) DESCRIPTION "An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes." OBJECT qtechBfdSessDstAddrType SYNTAX InetAddressType --{ unknown(0), ipv4(1), ipv6(2), ipv6z(4) } DESCRIPTION "Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required." OBJECT qtechBfdSessDstAddr SYNTAX InetAddress (SIZE (0|4|16|20)) DESCRIPTION "An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes." OBJECT qtechBfdSessRowStatus SYNTAX RowStatus --{ active(1), notInService(2) } --WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notReady is not required." OBJECT qtechBfdSessDiscMapRowStatus SYNTAX RowStatus --{ active(1), notInService(2) } --WRITE-SYNTAX RowStatus { active(1), notInService(2), --createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notReady is not required." OBJECT qtechBfdSessIpMapRowStatus SYNTAX RowStatus --{ active(1), notInService(2) } --WRITE-SYNTAX RowStatus { active(1), notInService(2), --createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notReady is not required." ::= { qtechBfdCompliances 1 } qtechBfdModuleReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that only provide read-only support for BFD-MIB. Such devices can then be monitored but cannot be configured using this MIB module." MODULE -- This module. MANDATORY-GROUPS { qtechBfdSessionGroup, qtechBfdSessionReadOnlyGroup, qtechBfdSessionPerfGroup, qtechBfdNotificationGroup } GROUP qtechBfdSessionPerfHCGroup DESCRIPTION "This group is mandatory for all systems that are able to support the Counter64 date type." OBJECT qtechBfdSessVersionNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDestinationUdpPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessSourceUdpPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessEchoSourceUdpPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessOperMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDemandModeDesiredFlag MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessControlPlaneIndepFlag MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessMultipointFlag MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessInterface MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessSrcAddrType SYNTAX InetAddressType --{ unknown(0), ipv4(1), ipv6(2), ipv6z(4) } MIN-ACCESS read-only DESCRIPTION "Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required." OBJECT qtechBfdSessSrcAddr SYNTAX InetAddress (SIZE (0|4|16|20)) MIN-ACCESS read-only DESCRIPTION "An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes." OBJECT qtechBfdSessDstAddrType SYNTAX InetAddressType --{ unknown(0), ipv4(1), ipv6(2), ipv6z(4) } MIN-ACCESS read-only DESCRIPTION "Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required." OBJECT qtechBfdSessDstAddr SYNTAX InetAddress (SIZE (0|4|16|20)) MIN-ACCESS read-only DESCRIPTION "An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes." OBJECT qtechBfdSessGTSM MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessGTSMTTL MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDesiredMinTxInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessReqMinRxInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessReqMinEchoRxInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDetectMult MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessAuthPresFlag MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessAuthenticationType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessAuthenticationKeyID MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessAuthenticationKey MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessRowStatus SYNTAX RowStatus --{ active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDiscMapStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessDiscMapRowStatus SYNTAX RowStatus --{ active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessIpMapStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT qtechBfdSessIpMapRowStatus SYNTAX RowStatus --{ active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { qtechBfdCompliances 2 } -- Units of conformance. qtechBfdSessionGroup OBJECT-GROUP OBJECTS { qtechBfdAdminStatus, qtechBfdSessNotificationsEnable, qtechBfdSessVersionNumber, qtechBfdSessType, qtechBfdSessDestinationUdpPort, qtechBfdSessSourceUdpPort, qtechBfdSessEchoSourceUdpPort, qtechBfdSessAdminStatus, qtechBfdSessOperMode, qtechBfdSessDemandModeDesiredFlag, qtechBfdSessControlPlaneIndepFlag, qtechBfdSessMultipointFlag, qtechBfdSessInterface, qtechBfdSessSrcAddrType, qtechBfdSessSrcAddr, qtechBfdSessDstAddrType, qtechBfdSessDstAddr, qtechBfdSessGTSM, qtechBfdSessGTSMTTL, qtechBfdSessDesiredMinTxInterval, qtechBfdSessReqMinRxInterval, qtechBfdSessReqMinEchoRxInterval, qtechBfdSessDetectMult, qtechBfdSessAuthPresFlag, qtechBfdSessAuthenticationType, qtechBfdSessAuthenticationKeyID, qtechBfdSessAuthenticationKey, qtechBfdSessStorageType, qtechBfdSessRowStatus, qtechBfdSessDiscMapStorageType, qtechBfdSessDiscMapRowStatus, qtechBfdSessIpMapStorageType, qtechBfdSessIpMapRowStatus } STATUS current DESCRIPTION "Collection of objects needed for BFD sessions." ::= { qtechBfdGroups 1 } qtechBfdSessionReadOnlyGroup OBJECT-GROUP OBJECTS { qtechBfdSessDiscriminator, qtechBfdSessRemoteDiscr, qtechBfdSessState, qtechBfdSessRemoteHeardFlag, qtechBfdSessDiag, qtechBfdSessNegotiatedInterval, qtechBfdSessNegotiatedEchoInterval, qtechBfdSessNegotiatedDetectMult, qtechBfdSessDiscMapIndex, qtechBfdSessIpMapIndex } STATUS current DESCRIPTION "Collection of read-only objects needed for BFD sessions." ::= { qtechBfdGroups 2 } qtechBfdSessionPerfGroup OBJECT-GROUP OBJECTS { qtechBfdSessPerfCtrlPktIn, qtechBfdSessPerfCtrlPktOut, qtechBfdSessPerfCtrlPktDrop, qtechBfdSessPerfCtrlPktDropLastTime, qtechBfdSessPerfEchoPktIn, qtechBfdSessPerfEchoPktOut, qtechBfdSessPerfEchoPktDrop, qtechBfdSessPerfEchoPktDropLastTime, qtechBfdSessUpTime, qtechBfdSessPerfLastSessDownTime, qtechBfdSessPerfLastCommLostDiag, qtechBfdSessPerfSessUpCount, qtechBfdSessPerfDiscTime } STATUS current DESCRIPTION "Collection of objects needed to monitor the performance of BFD sessions." ::= { qtechBfdGroups 3 } qtechBfdSessionPerfHCGroup OBJECT-GROUP OBJECTS { qtechBfdSessPerfCtrlPktInHC, qtechBfdSessPerfCtrlPktOutHC, qtechBfdSessPerfCtrlPktDropHC, qtechBfdSessPerfEchoPktInHC, qtechBfdSessPerfEchoPktOutHC, qtechBfdSessPerfEchoPktDropHC } STATUS current DESCRIPTION "Collection of objects needed to monitor the performance of BFD sessions for which the values of qtechBfdSessPerfPktIn, qtechBfdSessPerfPktOut wrap around too quickly." ::= { qtechBfdGroups 4 } qtechBfdNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { qtechBfdSessUp, qtechBfdSessDown } STATUS current DESCRIPTION "Set of notifications implemented in this module." ::= { qtechBfdGroups 5 } END