DKSF-70-4-X-X-1 DEFINITIONS ::= BEGIN
 
IMPORTS
        enterprises,
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Counter32,
        Gauge32,
        Counter64,
        Integer32,
        TimeTicks,
        NOTIFICATION-TYPE 
                FROM SNMPv2-SMI 
        TEXTUAL-CONVENTION,
        DisplayString,
        TruthValue,
        TimeStamp
                FROM SNMPv2-TC 
        snmpTraps 
                FROM SNMPv2-MIB ;
                
 
uniPingServerSolutionV3 MODULE-IDENTITY 
        LAST-UPDATED "201505290000Z"  
        ORGANIZATION "Alentis Electronics" 
        CONTACT-INFO 
                "developers@netping.ru" 
        DESCRIPTION 
                "Generic MIB for NetPing remote sensing and control" 

        REVISION "201505290000Z"        
        DESCRIPTION                
                "npIoTrapLevelLegend added, npIrStatus values redefined"                
                
        REVISION "201412030000Z"   
        DESCRIPTION                  
                "npRelayMode, npIoLevelOut values changed"

        REVISION "201411260000Z"   
        DESCRIPTION                 
                "npRelayN, npRelayMode, npIoLineN, npRelHumSensorStatusH, npRelHumSensorStatus values changed"
                
        REVISION "201402020000Z"   
        DESCRIPTION 
                "npRelayMode valid values changed, (3) excluded "                  
                
        REVISION "201401290000Z"   
        DESCRIPTION 
                "npCurLoop, npRelHumidity, npIr branches has added"                  
                
        REVISION "201401210000Z"   
        DESCRIPTION 
                "partial rewrite for DKSF 70"  
                
        REVISION "201304110000Z"   
        DESCRIPTION 
                "partial rewrite for DKSF 48"                
				
        REVISION "201205310000Z"   
        DESCRIPTION 
                "npPwrRelayState branch was added"
				
        REVISION "201204170000Z"   
        DESCRIPTION 
                "npReboot branch was added"

		REVISION "201203230000Z"   
        DESCRIPTION 
                "Minor changes to IR module for IRC-TRv2"				
				
        REVISION "201109230000Z"   
        DESCRIPTION 
                "4 IO lines,
                 Identification is changed from DKSF 52.4 to DKSF 52.5"
                 
        REVISION "201103240000Z"   
        DESCRIPTION 
                "npIoPulseCounter, npIoSinglePulseDuration, npIoSinglePulseStart is added
                 Identification is changed from DKSF 52.3 to DKSF 52.4"
                
        REVISION "201010140000Z"   
        DESCRIPTION 
                "IR module support" 

        REVISION "201009200000Z"   
        DESCRIPTION 
                "dksf 52.3 subversion" 

        REVISION "201005310000Z"   
        DESCRIPTION 
                "dksf 51.3 subversion" 
                
        REVISION "201004140000Z"   
        DESCRIPTION 
                "SMIv2-style rewrite" 
                
        ::= { lightcom 70 }


                
lightcom OBJECT IDENTIFIER::={enterprises 25728 }


npTrapInfo OBJECT IDENTIFIER::={lightcom 90}

npTrapEmailTo OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "user-specified e-mail for NetPing Trap Forwarding Service"
     ::={npTrapInfo 1}   


npRelay OBJECT IDENTIFIER::={ lightcom 5500 }

npRelayTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpRelayEntry
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Watchdog and outlet/relay control table"     
    ::= { npRelay 5 } 

npRelayEntry     OBJECT-TYPE 
    SYNTAX     NpRelayEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Relay/outlet table row"  
    INDEX     { npRelayN } 
    ::= { npRelayTable 1 } 

NpRelayEntry     ::= SEQUENCE { 
    npRelayN               INTEGER,
    npRelayMode            INTEGER,
    npRelayStartReset      INTEGER,
    npRelayMemo            DisplayString,
    npRelayState           INTEGER
-- not in dksf70 npRelayPowered INTEGER
    } 
    
npRelayN  OBJECT-TYPE 
    SYNTAX     INTEGER  (1..1)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The N of output relay" 
    ::= { npRelayEntry 1 }
    
npRelayMode  OBJECT-TYPE
     SYNTAX     INTEGER {
                   flip(-1),
                   off(0),
                   on(1),
                   watchdog(2),
                   schedule(3),
                   scheduleAndWatchdog(4),
                   logic(5)
     }
     MAX-ACCESS     read-write
     STATUS     current
     DESCRIPTION     "Control of relay:
                     -1 - flip between on(1) and off(0)
                      0 - manual off 
                      1 - manual on
                      2 - watchdog
                      3 - schedule
                      4 - both schedule and watchdog (while switched on by schedule)
                      5 - logic"
     ::={npRelayEntry  2}
     
npRelayStartReset  OBJECT-TYPE
     SYNTAX     INTEGER
     MAX-ACCESS read-write
     STATUS     current
     DESCRIPTION     "Write 1 to start reset (switch relay off for some time)"
     ::={npRelayEntry 3}    
    
npRelayMemo  OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Relay memo"
     ::={npRelayEntry 6}     

npRelayState  OBJECT-TYPE
     SYNTAX     INTEGER {
                   off(0),
                   on(1)
     }
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Actual relay state at the moment, 
                      regardless of source of control.
                      0 - relay is off 
                      1 - relay is on"
     ::={npRelayEntry  15}

-- npRelayPowered OBJECT-TYPE
--     SYNTAX     INTEGER {
--                   no(0),
--                 yes(1)
--     }
--     MAX-ACCESS     read-only
--     STATUS     current
--     DESCRIPTION     "AC presence on output.
--                      0 - no AC dew to relay switched off or no ac on input
--                      1 - AC is present"
--     ::={npRelayEntry  16}
 
 
npThermo OBJECT IDENTIFIER::={lightcom 8800}
     
npThermoTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpThermoEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Thermo Sensors Table"     
    ::= { npThermo 1 } 

npThermoEntry       OBJECT-TYPE 
    SYNTAX     NpThermoEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Thermo Sensors Table Row"     
    INDEX     { npThermoSensorN } 
    ::= { npThermoTable 1 } 

NpThermoEntry     ::= SEQUENCE { 
    npThermoSensorN INTEGER,
    npThermoValue   INTEGER,
    npThermoStatus  INTEGER,
    npThermoLow     INTEGER,
    npThermoHigh    INTEGER,
    npThermoMemo    DisplayString 
    } 

npThermoSensorN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The id of temperature sensor, 1 to 8" 
    ::= { npThermoEntry 1 }

npThermoValue     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature, deg.C" 
    ::= { npThermoEntry 2 }      
     
npThermoStatus    OBJECT-TYPE 
    SYNTAX     INTEGER {
                  failed(0),
                  low(1),
                  norm(2),
                  high(3)
                }     
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)" 
    ::= { npThermoEntry 3 }      

npThermoLow      OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Bottom margin of normal temperature range, deg.C" 
    ::= { npThermoEntry 4 } 

npThermoHigh     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Top margin of normal temperature range, deg.C" 
    ::= { npThermoEntry 5 } 
    
npThermoMemo    OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "T channel memo" 
    ::= { npThermoEntry 6 } 
    
    
npThermoTraps      OBJECT IDENTIFIER::={npThermo 2} 
npThermoTrapPrefix OBJECT IDENTIFIER::={npThermoTraps 0} 

npThermoTrapSensorN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The id of temperature sensor, 1 to 8" 
    ::= { npThermoTraps 1 }

npThermoTrapValue     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature, deg.C" 
    ::= { npThermoTraps 2 }      
     
npThermoTrapStatus    OBJECT-TYPE 
    SYNTAX     INTEGER {
                  failed(0),
                  low(1),
                  norm(2),
                  high(3)
                }     
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)" 
    ::= { npThermoTraps 3 }      

npThermoTrapLow      OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Bottom margin of normal temperature range, deg.C" 
    ::= { npThermoTraps 4 } 

npThermoTrapHigh     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Top margin of normal temperature range, deg.C" 
    ::= { npThermoTraps 5 } 
    
npThermoTrapMemo    OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "T channel memo" 
    ::= { npThermoTraps 6 } 
    
npThermoTrap NOTIFICATION-TYPE
OBJECTS { 
    npThermoTrapSensorN,
    npThermoTrapValue,
    npThermoTrapStatus,
    npThermoTrapLow,
    npThermoTrapHigh,
    npThermoTrapMemo 
        }
STATUS  current
DESCRIPTION
        "Status of Thermo sensor is changed (crossing of normal temp. range)"
::= { npThermoTrapPrefix 1 }



npIo  OBJECT IDENTIFIER::={lightcom 8900}
     
npIoTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpIoEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Digital Input/output Table"     
    ::= { npIo 1 } 

npIoEntry        OBJECT-TYPE 
    SYNTAX     NpIoEntry
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Digital Input/output Table Row"     
    INDEX     { npIoLineN } 
    ::= { npIoTable 1 } 

NpIoEntry   ::= SEQUENCE { 
    npIoLineN    INTEGER,
    npIoLevelIn  INTEGER,
    npIoLevelOut INTEGER,
    npIoMemo     DisplayString,
    npIoPulseCounter        Counter32,
    npIoSinglePulseDuration INTEGER,
    npIoSinglePulseStart    INTEGER
    } 

npIoLineN      OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Number of IO line, from 1 to max supported" 
    ::= { npIoEntry 1 }

npIoLevelIn    OBJECT-TYPE 
    SYNTAX     INTEGER (0..1)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Input level, 0 or 1" 
    ::= { npIoEntry 2 }
    
npIoLevelOut   OBJECT-TYPE 
    SYNTAX     INTEGER {
                 flip(-1),
                 low(0),
                 high(1)
                 }
    MAX-ACCESS     read-write 
    STATUS     current 
    DESCRIPTION  "Output level, 0 or 1.
                  Write -1 to flip output." 
    ::= { npIoEntry 3 }  

npIoMemo    OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "IO line memo" 
    ::= { npIoEntry 6 }    

npIoPulseCounter   OBJECT-TYPE 
    SYNTAX     Counter32
    MAX-ACCESS     read-write 
    STATUS     current 
    DESCRIPTION  "Pulse Counter on IO input line (counts positive fronts)
                  Write 0 to reset." 
    ::= { npIoEntry 9 }     

npIoSinglePulseDuration   OBJECT-TYPE 
    SYNTAX     INTEGER (100..25500)
    MAX-ACCESS    read-write 
    STATUS     current 
    DESCRIPTION  "Set duration of single pulse on IO output line,
                  100ms to 25500ms, min. step is 100ms" 
    ::= { npIoEntry 12 }     

npIoSinglePulseStart    OBJECT-TYPE     
    SYNTAX     INTEGER
    MAX-ACCESS    read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to start single pulse on IO output. 
                  Output will be inverted for time, specified by npIoSinglePulseDuration"
    ::= { npIoEntry 13 } 

npIoTraps      OBJECT IDENTIFIER::={npIo 2} 
npIoTrapPrefix OBJECT IDENTIFIER::={npIoTraps 0} 

npIoTrapLineN OBJECT-TYPE 
    SYNTAX     INTEGER (1..2)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Trap data, Number of IO line" 
    ::= { npIoTraps 1 }

npIoTrapLevelIn OBJECT-TYPE 
    SYNTAX     INTEGER (0..1)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Trap data, new Input level, 0 or 1" 
    ::= { npIoTraps 2 }

npIoTrapMemo OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Trap data, IO line memo" 
    ::= { npIoTraps 6 }
    
npIoTrapLevelLegend OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Legend for current logic level on the IO line" 
    ::= { npIoTraps 7 }    
    
npIoTrap NOTIFICATION-TYPE
    OBJECTS { 
          npIoTrapLineN,
          npIoTrapLevelIn,
          npIoTrapMemo,
          npIoTrapLevelLegend
        }
    STATUS  current
    DESCRIPTION
        "Input state of IO line is changed"
    ::= { npIoTrapPrefix 1 }


    
npCurLoop OBJECT IDENTIFIER::={lightcom 8300}
     
npCurLoopTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpCurLoopEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Current loop sensors Table"     
    ::= { npCurLoop 1 } 

npCurLoopEntry       OBJECT-TYPE 
    SYNTAX     NpCurLoopEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Current loop sensors Table Row"     
    INDEX     { npCurLoopN } 
    ::= { npCurLoopTable 1 } 

NpCurLoopEntry     ::= SEQUENCE { 
    npCurLoopN       INTEGER,
    npCurLoopStatus  INTEGER,
    npCurLoopI       INTEGER,
    npCurLoopV       INTEGER,
    npCurLoopR       INTEGER, 
    npCurLoopPower   INTEGER    
    }

npCurLoopN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Index of current loop, 1 to max supported" 
    ::= { npCurLoopEntry 1 }

npCurLoopStatus     OBJECT-TYPE 
    SYNTAX     INTEGER {
        ok(0),
        alert(1),
        cut(2),
        short(3),
        notPowered(4)
        }
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of the loop
                  0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered" 
    ::= { npCurLoopEntry 2 } 

npCurLoopI     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Loop current, mA"
    ::= { npCurLoopEntry 3 }  

npCurLoopV     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Voltage drop on the loop, mV"
    ::= { npCurLoopEntry 4 }
    
npCurLoopR     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Resistance of the loop, Ohm"
    ::= { npCurLoopEntry 5 }
    
npCurLoopPower     OBJECT-TYPE 
    SYNTAX     INTEGER  {
           off(0),
           on(1),
           cyclePower(2)
           }
    MAX-ACCESS     read-write 
    STATUS     current 
    DESCRIPTION  "Control of loop power
                  0=Off, 1=On, 2=reset by off/on power" 
    ::= { npCurLoopEntry 7 } 

npCurLoopTraps   OBJECT IDENTIFIER::={npCurLoop 2} 
npCurLoopTrapPrefix OBJECT IDENTIFIER::={npCurLoopTraps 0} 

npCurLoopTrapN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Index of current loop, which status has changed" 
    ::= { npCurLoopTraps 1 }

npCurLoopTrapStatus     OBJECT-TYPE 
    SYNTAX     INTEGER {
        ok(0),
        alert(1),
        cut(2),
        short(3),
        notPowered(4)
        }
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of the loop
                  0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered" 
    ::= { npCurLoopTraps 2 } 

npCurLoopTrapI     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Loop current, mA"
    ::= { npCurLoopTraps 3 }  

npCurLoopTrapV     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Voltage drop on the loop, mV"
    ::= { npCurLoopTraps 4 }
    
npCurLoopTrapR     OBJECT-TYPE 
    SYNTAX     INTEGER (0..99999)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Resistance of the loop, Ohm"
    ::= { npCurLoopTraps 5 }

npCurLoopTrapPower     OBJECT-TYPE 
    SYNTAX     INTEGER  {
           off(0),
           on(1)
           }
    MAX-ACCESS     read-write 
    STATUS     current 
    DESCRIPTION  "Status of loop power
                  0=Off, 1=On" 
    ::= { npCurLoopTraps 7 } 
    
npCurLoopTrap NOTIFICATION-TYPE
    OBJECTS { 
    npCurLoopTrapN,
    npCurLoopTrapStatus,
    npCurLoopTrapI,
    npCurLoopTrapV,
    npCurLoopTrapR, 
    npCurLoopTrapPower,
	npTrapEmailTo	
        }
    STATUS  current
    DESCRIPTION
        "Status of current loop N has changed!"
    ::= { npCurLoopTrapPrefix 1 }
  


    
npRelHumidity OBJECT IDENTIFIER::={lightcom 8400}
npRelHumSensor OBJECT IDENTIFIER::={npRelHumidity 2}

npRelHumSensorStatus     OBJECT-TYPE 
    SYNTAX     INTEGER {
      error(0),
      ok(1)
      }
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of the Rel.Humidity Sensor One
                  1=Normal, 0=Error or Sensor isn't connected"
    ::= { npRelHumSensor 3 } 
    
npRelHumSensorValueH    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative humidity value, %" 
    ::= { npRelHumSensor 2 } 
    
npRelHumSensorValueT     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..200)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Sensor temperature, deg.C" 
    ::= { npRelHumSensor 4 }     

npRelHumSensorStatusH     OBJECT-TYPE 
    SYNTAX     INTEGER {
                  sensorFailed(0),
                  belowSafeRange(1),
                  inSafeRange(2),
                  aboveSafeRange(3)
                }  
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of Relative Humiduty" 
    ::= { npRelHumSensor 5 } 
	
npRelHumSafeRangeHigh    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative Humidity safe range, top margin, %RH" 
    ::= { npRelHumSensor 7 } 	
	
npRelHumSafeRangeLow    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative Humidity safe range, bottom margin, %RH" 
    ::= { npRelHumSensor 8 } 		

npRelHumSensorValueT100   OBJECT-TYPE 
    SYNTAX     Integer32
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Sensor temperature, deg.C * 100 (fixed point two decimal places)
                  Used to get access to the fractional part of T value" 
    ::= { npRelHumSensor 9 } 

npRelHumTraps   OBJECT IDENTIFIER::={npRelHumidity 9} 
npRelHumTrapPrefix OBJECT IDENTIFIER::={npRelHumTraps 0} 	

npRelHumTrap NOTIFICATION-TYPE
    OBJECTS { 
	npRelHumSensorStatusH,
    npRelHumSensorValueH,
	npRelHumSafeRangeHigh,
	npRelHumSafeRangeLow,
	npTrapEmailTo	
        }
    STATUS  current
    DESCRIPTION
        "Status of Relative Humidity RH sensor has changed!"
    ::= { npRelHumTrapPrefix 1 }




npGsm  OBJECT IDENTIFIER::={lightcom 3800}
npGsmInfo OBJECT IDENTIFIER::={npGsm 1}

npGsmFailed  OBJECT-TYPE 
    SYNTAX     INTEGER {
                        ok (0), 
                        failed (1),
                        fatalError (2)
                       }
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "Firmware's GSM module status" 
    ::= { npGsmInfo 1 }   

npGsmRegistration OBJECT-TYPE 
    SYNTAX     INTEGER {
                        impossible (0), 
                        homeNetwork (1),
                        searching (2),
                        denied (3),
                        unknown (4),
                        roaming (5),
                        infoUpdate (255)
                       }
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "Status of modem registration in GSM network (AT+CREG? result)" 
    ::= { npGsmInfo 2 } 
    
npGsmStrength  OBJECT-TYPE 
    SYNTAX     INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "GSM signal strength.
                  0..31 = 0..100%, 
                  99 = unknown or n/a, 
                  255 = updating info" 
    ::= { npGsmInfo 3 } 

npGsmSendSms  OBJECT-TYPE 
    SYNTAX    DisplayString
    MAX-ACCESS  read-write
    STATUS    current 
    DESCRIPTION  "Send arbitrary SMS.
                  Format: [phone_number,phone_number,...] Message
                  One to four destination phone numbers
                  If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup
                  Only Latin characters allowed in message body"
    ::= { npGsmInfo 9 }     

npGsmTraps      OBJECT IDENTIFIER::={npGsm 2} 
npGsmTrapPrefix OBJECT IDENTIFIER::={npGsmTraps 0} 

npGsmTrap NOTIFICATION-TYPE
    OBJECTS { 
          npGsmFailed,
          npGsmRegistration,
          npGsmStrength
        }
    STATUS  current
    DESCRIPTION
        "GSM modem or SMS firmware problems"
    ::= { npGsmTrapPrefix 1 }


    
npIr  OBJECT IDENTIFIER::={lightcom 7900}
npIrCtrl OBJECT IDENTIFIER::={npIr 1}

npIrPlayCmd OBJECT-TYPE 
    SYNTAX     INTEGER (1..16)
    MAX-ACCESS     read-write 
    STATUS     current 
    DESCRIPTION  "Write IR command number to send IR command" 
    ::= { npIrCtrl 1 }

npIrReset  OBJECT-TYPE 
    SYNTAX     INTEGER (0..1)
    MAX-ACCESS  read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to reset IR transiever.
                  After reset, send IR command and check npIrStatus." 
    ::= { npIrCtrl 2 }   
    
npIrStatus  OBJECT-TYPE 
    SYNTAX     INTEGER {
                  commandCompleted (0),
                  protocolError (1),
                  commandAccepted (2),
                  errorUnknown (16),
                  errorBadNumber (17),
                  errorEmptyRecord (18),
                  errorFlashChip (19),
                  errorTimeout (20),
                  errorExtBusBusy (21)
                } 
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "IR transiever status" 
    ::= { npIrCtrl 3 } 
        
    
    
npReboot OBJECT IDENTIFIER::={ lightcom 911 }   

npSoftReboot OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to reboot device after 
                  current operations completition" 
    ::= { npReboot 1 }

npResetStack OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to re-initialize network 
                  stack" 
    ::= { npReboot 2 }    

npForcedReboot OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to immediate forced reboot" 
    ::= { npReboot 3 } 
	
END