-- ************************************************************************************************ -- FileName :mmpfPMib.my -- Description :MultiMedia Platform private MIB(D4000 流用,改造 MIB定義ファイル) -- Revision History : -- Ver. mark date -- 01.24 @024 01/16/2002 -- ************************************************************************************************ -- NECSW-MIB DEFINITIONS ::= BEGIN MMPF-MIB DEFINITIONS ::= BEGIN IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI Integer32, Gauge32 FROM SNMPv2-SMI TimeStamp, PhysAddress FROM SNMPv2-TC OBJECT-TYPE FROM RFC-1212 -- DisplayString -- FROM RFC1155-SMI -- @008 add from TruthValue FROM RFC1253-MIB -- @008 add end TRAP-TYPE FROM RFC-1215; RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } NetPrefix ::= OCTET STRING (SIZE (13)) DisplayString ::= OCTET STRING BridgeId ::= OCTET STRING (SIZE (8)) Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds DateAndTime ::= OCTET STRING (SIZE (7 | 8 | 11)) -- in OpenView above must be comment 98/12/15 YI @002 -- Added SIZE(7) for SanFran -- The following definition was gotten from rfc1514 -- A date-time specification for the local time of day. -- This data type is intended to provide a consistent -- method of reporting date information. -- -- field octets contents range -- _____ ______ ________ _____ -- 1 1-2 year 0..65536 -- (in network byte order) -- 2 3 month 1..12 -- 3 4 day 1..31 -- 4 5 hour 0..23 -- 5 6 minutes 0..59 -- 6 7 seconds 0..60 -- (use 60 for leap-second) -- 7 8 deci-seconds 0..9 -- 8 9 direction from UTC "+" / "-" -- (in ascii notation) -- 9 10 hours from UTC 0..11 -- 10 11 minutes from UTC 0..59 -- -- Note that if only local time is known, then -- timezone information (fields 8-10) is not present. -- The following definition was cadged from the Bridge MIB MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order -- defined by IEEE 802.1a, i.e., as if it were transmitted -- least significant bit first, even though 802.5 (in -- contrast to other n802.x protocols) requires MAC -- addresses to be transmitted most significant bit first. -- -- 16-bit addresses, if needed, are represented by setting -- their upper 4 octets to all 0's, i.e., AAFF would be -- represented as 00000000AAFF. -- The following definition is privately defined for Sanfran Private MIB -- nec OBJECT IDENTIFIER ::= { enterprises 119} -- necProduct OBJECT IDENTIFIER ::= { nec 1 } -- nec-mib OBJECT IDENTIFIER ::= { nec 2 } -- necExperimental OBJECT IDENTIFIER ::= { nec 3 } -- datax OBJECT IDENTIFIER ::= { necProduct 3 } -- ether-sw OBJECT IDENTIFIER ::= { datax 10 } -- sf OBJECT IDENTIFIER ::= { ether-sw 3 } -- necCommon OBJECT IDENTIFIER ::= { nec-mib 1 } -- necFunction OBJECT IDENTIFIER ::= { nec-mib 2 } -- necProductDepend OBJECT IDENTIFIER ::= { nec-mib 3 } -- datax-mib OBJECT IDENTIFIER ::= { necProductDepend 3 } -- ether-sw-mib OBJECT IDENTIFIER ::= { datax-mib 10 } -- sf-mib OBJECT IDENTIFIER ::= { ether-sw-mib 3 } org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } nec OBJECT IDENTIFIER ::= { enterprises 119} -- 98/12/15 YI mmpf => mmpf-mib CHG start @002 -- sysObjectID necProduct OBJECT IDENTIFIER ::= { nec 1 } datax OBJECT IDENTIFIER ::= { necProduct 3 } mmpf OBJECT IDENTIFIER ::= { datax 13 } mmn9110 OBJECT IDENTIFIER ::= { mmpf 1 } mmn9120 OBJECT IDENTIFIER ::= { mmpf 2 } -- [sysObjectID] MM-Node9110/MM-Node9120 -- mmn9110 OBJECT IDENTIFIER ::= { nec necProduct(1) datax(3) mmpf(13) mmn9110(1) } -- mmn9120 OBJECT IDENTIFIER ::= { nec necProduct(1) datax(3) mmpf(13) mmn9110(2) } -- @016 add from -- for IX5005 ix5005 OBJECT IDENTIFIER ::= { mmpf 3 } -- @016 add end -- @023 add from -- for IX5003 ix5003 OBJECT IDENTIFIER ::= { mmpf 4 } -- @023 add end nec-mib OBJECT IDENTIFIER ::= { nec 2 } necProductDepend OBJECT IDENTIFIER ::= { nec-mib 3 } datax-mib OBJECT IDENTIFIER ::= { necProductDepend 3 } mmpf-mib OBJECT IDENTIFIER ::= { datax-mib 13 } -- D4000 流用,改造 MIB定義 mpSystem OBJECT IDENTIFIER ::= { mmpf-mib 1 } mpIfCard OBJECT IDENTIFIER ::= { mmpf-mib 2 } mpEtherPort OBJECT IDENTIFIER ::= { mmpf-mib 3 } mpVlan OBJECT IDENTIFIER ::= { mmpf-mib 4 } mpBridge OBJECT IDENTIFIER ::= { mmpf-mib 5 } mpDbAccess OBJECT IDENTIFIER ::= { mmpf-mib 6 } mpEventLog OBJECT IDENTIFIER ::= { mmpf-mib 7 } mpUiSession OBJECT IDENTIFIER ::= { mmpf-mib 8 } mpFtp OBJECT IDENTIFIER ::= { mmpf-mib 9 } mpDhcp OBJECT IDENTIFIER ::= { mmpf-mib 10 } mpIp OBJECT IDENTIFIER ::= { mmpf-mib 11 } mpRip OBJECT IDENTIFIER ::= { mmpf-mib 12 } mpSnmp OBJECT IDENTIFIER ::= { mmpf-mib 13 } mpStats OBJECT IDENTIFIER ::= { mmpf-mib 14 } mpCli OBJECT IDENTIFIER ::= { mmpf-mib 15 } mpAtm OBJECT IDENTIFIER ::= { mmpf-mib 16 } mpLis OBJECT IDENTIFIER ::= { mmpf-mib 17 } mpDns OBJECT IDENTIFIER ::= { mmpf-mib 18 } mpLec OBJECT IDENTIFIER ::= { mmpf-mib 19 } mpMpc OBJECT IDENTIFIER ::= { mmpf-mib 20 } mpStp OBJECT IDENTIFIER ::= { mmpf-mib 21 } mpLlc OBJECT IDENTIFIER ::= { mmpf-mib 22 } -- @008 add from -- 91XX ステップ3.0 MIB定義 mpOspf OBJECT IDENTIFIER ::= { mmpf-mib 23 } -- @008 add end -- 91XX ステップ1.0 MIB定義 mpObsCtl OBJECT IDENTIFIER ::= { mmpf-mib 101 } mpCardInfo OBJECT IDENTIFIER ::= { mmpf-mib 102 } mpInterface OBJECT IDENTIFIER ::= { mmpf-mib 103 } -- 91XX ステップ2.0 MIB定義 mpPvoice OBJECT IDENTIFIER ::= { mmpf-mib 104 } -- @008 add from -- 91XX ステップ3.0 MIB定義 mpAtmCallCtl OBJECT IDENTIFIER ::= { mmpf-mib 110 } mpCes OBJECT IDENTIFIER ::= { mmpf-mib 111 } mpIpsw OBJECT IDENTIFIER ::= { mmpf-mib 112 } mpInsCtl OBJECT IDENTIFIER ::= { mmpf-mib 113 } mpFfr OBJECT IDENTIFIER ::= { mmpf-mib 114 } mpIpswAtm OBJECT IDENTIFIER ::= { mmpf-mib 115 } -- @008 add to -- @017 add from mpPpp OBJECT IDENTIFIER ::= { mmpf-mib 120 } mpPos OBJECT IDENTIFIER ::= { mmpf-mib 121 } mpFrpp OBJECT IDENTIFIER ::= { mmpf-mib 123 } mpMpls OBJECT IDENTIFIER ::= { mmpf-mib 124 } mpMcc OBJECT IDENTIFIER ::= { mmpf-mib 125 } -- @017 add to -- @019 add from mpDetour OBJECT IDENTIFIER ::= { mmpf-mib 130 } -- @019 add to -- @022 add from mpIpv6 OBJECT IDENTIFIER ::= { mmpf-mib 131 } -- @022 add to -- @024 add from mpNetwatch OBJECT IDENTIFIER ::= { mmpf-mib 132 } mpNetping OBJECT IDENTIFIER ::= { mmpf-mib 133 } -- @024 add to -- 98/12/15 YI mmpf => mmpf-mib CHG end -- *************************************************************************** -- the MM_Node9110/9120 System Group -- 11/30/1998 all overwrite @001 -- 12/21/1998 @002 -- *************************************************************************** -- Implementation of this group is mandatory for all the EtherStar -- systems. mpSysSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the software version number of this equipment" ::= { mpSystem 1 } mpSysTime OBJECT-TYPE SYNTAX DateAndTime ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the date and time to the realtime clock of this equipment" ::= { mpSystem 2 } mpSysFanTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSysFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the FAN information of this equipment." ::= { mpSystem 3 } mpSysFanEntry OBJECT-TYPE SYNTAX MpSysFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the FAN information of this equipment." INDEX { mpSysFanIndex } ::= { mpSysFanTable 1 } MpSysFanEntry ::= SEQUENCE { mpSysFanIndex INTEGER, mpSysFanType DisplayString, mpSysFanStatus INTEGER } mpSysFanIndex OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the FAN in the equipment uniquely. If machine is 9110, the range is '1' to '6'. If machine is 9120, the range is '1' to '10'." ::= { mpSysFanEntry 1 } mpSysFanType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the FAN type." ::= { mpSysFanEntry 2 } mpSysFanStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of the FAN operation. If it is set to '1', the FAN operation is normal. If it is set to '2', the FAN operation is abnormal." ::= { mpSysFanEntry 3 } mpSysVoltageTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSysVoltageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the information of the voltages of the equipment." ::= { mpSystem 4 } mpSysVoltageEntry OBJECT-TYPE SYNTAX MpSysVoltageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the information of the voltages of the equipment." INDEX { mpSysVoltagePackageIndex, mpSysVoltageIndex } ::= { mpSysVoltageTable 1 } MpSysVoltageEntry ::= SEQUENCE { mpSysVoltagePackageIndex INTEGER, mpSysVoltageIndex INTEGER, mpSysVoltageType DisplayString, mpSysVoltageReading INTEGER, mpSysVoltageStatus INTEGER } mpSysVoltagePackageIndex OBJECT-TYPE SYNTAX INTEGER { com0(1), -- chg to small case 12/21/98 YH com1(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Index value to identify the COM Package in the equipment uniquely." ::= { mpSysVoltageEntry 1 } mpSysVoltageIndex OBJECT-TYPE SYNTAX INTEGER { volt3point3a(1), -- chg 1st char to no-figure 12/21/98 YH volt3point3b(2), volt50v(3), volt3point3c(4), -- @021 add volt2point5(5), -- @021 add volt3point3d(6) -- @021 add } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify uniquely the voltage provided by the power unit of the equipment." ::= { mpSysVoltageEntry 2 } mpSysVoltageType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the power unit type and com type." ::= { mpSysVoltageEntry 3 } mpSysVoltageReading OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed voltage, in milli-volt (mV)." ::= { mpSysVoltageEntry 4 } mpSysVoltageStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the statsus of the voltage. If it is set to '1', the voltage is within the normal range. If it is set to '2', the voltage is in the abnormal range." ::= { mpSysVoltageEntry 5 } mpSysTempTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSysTempEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the Temperature information of this equipment." ::={ mpSystem 5 } mpSysTempEntry OBJECT-TYPE SYNTAX MpSysTempEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the information of the temperature of the equipment." INDEX { mpSysTempPackageIndex } ::= { mpSysTempTable 1 } MpSysTempEntry ::= SEQUENCE { mpSysTempPackageIndex INTEGER, mpSysTempType DisplayString, mpSysTempStatus INTEGER, mpSysTempReading INTEGER, mpSysTempMinThresh INTEGER, mpSysTempMaxThresh INTEGER } mpSysTempPackageIndex OBJECT-TYPE SYNTAX INTEGER { com0(1), -- chg to small case 12/21/98YH com1(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Index value to identify the COM Package in the equipment uniquely." ::= { mpSysTempEntry 1 } mpSysTempType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the com unit type." ::= { mpSysTempEntry 2 } mpSysTempStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of the temperature of this equipment inside. If it is set to '1', the temperature is within the normal temperature range. If it is set to '2', the temperrature is in the abnomal range." ::= { mpSysTempEntry 3 } mpSysTempReading OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the temperature of the equipment inside, in degree (Celusius)." ::= { mpSysTempEntry 4 } mpSysTempMinThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the temperature of the equipment inside, in degree (Celusius)." ::= { mpSysTempEntry 5 } mpSysTempMaxThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the higher threshold of the normal temparature range for the equipment, in degree (Celsius)." ::= { mpSysTempEntry 6 } mpSysEqpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSysEqpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the outside equipment information." ::= { mpSystem 6 } mpSysEqpEntry OBJECT-TYPE SYNTAX MpSysEqpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the outside equipment information." INDEX { mpSysEqpIndex } ::= { mpSysEqpTable 1 } MpSysEqpEntry ::= SEQUENCE { mpSysEqpIndex INTEGER, mpSysEqpType DisplayString, mpSysEqpStatus INTEGER } mpSysEqpIndex OBJECT-TYPE SYNTAX INTEGER { equipment0(1), equipment1(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the outside equipment uniquely." ::= { mpSysEqpEntry 1 } mpSysEqpType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the external equipment type." ::= { mpSysEqpEntry 2 } mpSysEqpStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of the outside equipment operation. If it is set to '1', the outside equipment operation is normal. If it is set to '2', the outside equipment operation is abnormal." ::= { mpSysEqpEntry 3 } mpSysCpuUseTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSysCpuUseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the percentage of cpu using information." ::= { mpSystem 7 } mpSysCpuUseEntry OBJECT-TYPE SYNTAX MpSysCpuUseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the percentage of cpu using information." INDEX { mpSysCpuUseIndex, mpSysCpuTimeIndex } ::= { mpSysCpuUseTable 1 } MpSysCpuUseEntry ::= SEQUENCE { mpSysCpuUseIndex INTEGER, mpSysCpuTimeIndex INTEGER, mpSysCpuUseType DisplayString, mpSysCpuTimeType DisplayString, mpSysCpuUse INTEGER } mpSysCpuUseIndex OBJECT-TYPE SYNTAX INTEGER { slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot9(9), slot10(10), slot11(11), slot12(12), com0(91), com1(93) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the package in the equipment uniquely." ::= { mpSysCpuUseEntry 1 } mpSysCpuTimeIndex OBJECT-TYPE SYNTAX INTEGER { seconds5(1), minute1(2), minutes5(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the time collecting percentage of cpu using uniquely." ::= { mpSysCpuUseEntry 2 } mpSysCpuUseType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the slot type." ::= { mpSysCpuUseEntry 3 } mpSysCpuTimeType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the character string which describes the time type of collecting percentage of cpu using." ::= { mpSysCpuUseEntry 4 } mpSysCpuUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the percentage of cpu using." ::= { mpSysCpuUseEntry 5 } -- *************************************************************************** -- the MM_Node9110/9120 Interface Card Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. mpIfCardTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIfCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about interface card." ::= { mpIfCard 1 } mpIfCardEntry OBJECT-TYPE SYNTAX MpIfCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry Indicates that contains information about interface card." INDEX { mpIfCardSlotNumber } ::= { mpIfCardTable 1 } MpIfCardEntry ::= SEQUENCE { mpIfCardSlotNumber INTEGER, mpIfCardType INTEGER, mpIfCardOperSide DisplayString, mpIfCardOperVersion DisplayString, mpIfCardSideAVersion DisplayString, mpIfCardSideBVersion DisplayString, mpIfCardBootDpVersion DisplayString } mpIfCardSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates slot number of the interface card." ::= { mpIfCardEntry 1 } mpIfCardType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates kind of the interface card." ::= { mpIfCardEntry 2 } mpIfCardOperSide OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the side which was used for setting up" ::= { mpIfCardEntry 3 } mpIfCardOperVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the firmware version in operation." ::= { mpIfCardEntry 4 } mpIfCardSideAVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the firmware version of side A." ::= { mpIfCardEntry 5 } mpIfCardSideBVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the firmware version of side B." ::= { mpIfCardEntry 6 } mpIfCardBootDpVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the firmware version of BOOT/DP." ::= { mpIfCardEntry 7 } -- *************************************************************************** -- the MM_Node9110/9120 Ether Port Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. mpEtherPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MpEtherPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of Ether port information." ::= { mpEtherPort 1 } mpEtherPortEntry OBJECT-TYPE SYNTAX MpEtherPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of each Ether port's information." INDEX { mpEtherPortIfIndex } ::= { mpEtherPortTable 1 } MpEtherPortEntry ::= SEQUENCE { mpEtherPortIfIndex INTEGER, mpEtherPortLoopBackType INTEGER, mpEtherPortMode INTEGER } mpEtherPortIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex." ::= { mpEtherPortEntry 1 } mpEtherPortLoopBackType OBJECT-TYPE SYNTAX INTEGER { none(1), internal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of the Loop-back test. If it is set to '2', the internal Loop-back test is executed. The Loop-back test is finished when one test packet has been sent. If it is set to '1', the Loop-back testing is not being executed, which means it is in the normal mode." ::= { mpEtherPortEntry 2 } mpEtherPortMode OBJECT-TYPE SYNTAX INTEGER{ auto(1), hdx10(2), fdx10(3), hdx100(4), fdx100(5), hdx1000(6), -- @013 fdx1000(7) -- @013 } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the operation mode of the port. In case of Antomatical mode, the value '1' is set. In case of HDX10M, the value '2' is set. In case of FDX10M, the value '3' is set. In case of HDX100M, the value '4' is set. In case of FDX100M, the value '5' is set. In case of HDX1000M, the value '6' is set. -- @013 In case of FDX1000M, the value '7' is set. -- @013 The default value is '1'." ::= { mpEtherPortEntry 3 } mpEtherPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpEtherPortStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of Ether port status information." ::= { mpEtherPort 2 } mpEtherPortStatusEntry OBJECT-TYPE SYNTAX MpEtherPortStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of each Ether port's status information." INDEX { mpEtherPortStsIfIndex } ::= { mpEtherPortStatusTable 1 } MpEtherPortStatusEntry ::= SEQUENCE { mpEtherPortStsIfIndex INTEGER, mpEtherPortStsLoopBackResult INTEGER, mpEtherPortStsMode INTEGER, mpEtherPortStsSpeed Gauge, mpEtherPortStsFullDuplex INTEGER } mpEtherPortStsIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex." ::= { mpEtherPortStatusEntry 1 } mpEtherPortStsLoopBackResult OBJECT-TYPE SYNTAX INTEGER { invalid(1), notAccepted(2), success(3), fail(4) } -- @008 ACCESS read-write ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the result of the Loop-back test." ::= { mpEtherPortStatusEntry 2 } mpEtherPortStsMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates operation mode of the port. If it set to '1', operation mode is automatic. If it set to '2', operation mode is manual." ::= { mpEtherPortStatusEntry 3 } mpEtherPortStsSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicastes current speed of the port in bps." ::= { mpEtherPortStatusEntry 4 } mpEtherPortStsFullDuplex OBJECT-TYPE SYNTAX INTEGER { hdx(1), fdx(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates which current port status is full-duplex or half-duplex. If it is set to '1', it is half-duplex. If it is set to '2', it is full-duplex." ::= { mpEtherPortStatusEntry 5 } -- *************************************************************************** -- the MM_Node9110/9120 Virtual LAN Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. mpVlanModeStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates to validate the configuration of VLAN group. It is set to '1' when the configuration will be valid, after the value of objects had been modified." ::= { mpVlan 1 } -- the VLAN table mpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "It is used for VLAN configuration." ::= { mpVlan 2 } mpVlanEntry OBJECT-TYPE SYNTAX MpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table entry of the VLAN configuration." INDEX { mpVlanIndex } ::= { mpVlanTable 1 } MpVlanEntry ::= SEQUENCE { mpVlanIndex INTEGER, mpVlanRtrIndex INTEGER, mpVlanName DisplayString, mpVlanNameStatus INTEGER } mpVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the specified number to identify the VLAN. The lowest number must be assigned to the default VLAN." ::= { mpVlanEntry 1 } mpVlanRtrIndex OBJECT-TYPE SYNTAX INTEGER -- @008 ACCESS read-write ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the interface number assigned to the VLAN uniquely, within the equipment. The VLAN identified by this object is the same VLAN identified by the same number of ifIndex. The lowest number must be assigned to the default VLAN." ::= { mpVlanEntry 2 } mpVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the name which is assigned to the VLAN for administrative purpose. I is used to assign or change the name of VLAN. In the initial state, only 'default' is registered as the default VLAN. The default VLAN name cannot be changed." ::= { mpVlanEntry 3 } mpVlanNameStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "No description." ::= { mpVlanEntry 4 } -- the VLAN Group table mpVlanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of the VLAN group name registration." ::= { mpVlan 3 } mpVlanGroupEntry OBJECT-TYPE SYNTAX MpVlanGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of the VLAN group name registration." INDEX { mpVlanGrpIndex } ::= { mpVlanGroupTable 1 } MpVlanGroupEntry ::= SEQUENCE { mpVlanGrpIndex INTEGER, mpVlanGrpName DisplayString, mpVlanGrpNameStatus INTEGER } mpVlanGrpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify VLAN group. The value of this index and the index mpVlanIndex must be assigned uniquely,witrhin the range of 2 - 4095." ::= { mpVlanGroupEntry 1 } mpVlanGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is the name defined to this VLAN Group, for management purpose." ::= { mpVlanGroupEntry 2 } mpVlanGrpNameStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the entry of mpVlanGroupTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpVlanGroupEntry 3 } -- the Bigpipe table mpVlanBigpipeTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanBigpipeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of BigPipe name registration." ::= { mpVlan 4 } mpVlanBigpipeEntry OBJECT-TYPE SYNTAX MpVlanBigpipeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the entry of the mpVlanBigPipeTable." INDEX { mpVlanBigpipeIndex } ::= { mpVlanBigpipeTable 1 } MpVlanBigpipeEntry ::= SEQUENCE { mpVlanBigpipeIndex INTEGER, mpVlanBigpipeName DisplayString, mpVlanBigpipeNameStatus INTEGER, mpVlanBigpipeMode -- @013 INTEGER -- @013 } mpVlanBigpipeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "No description." ::= { mpVlanBigpipeEntry 1 } mpVlanBigpipeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the index to identify the BigPipe. The value of this index should be within 1 - 6." ::= { mpVlanBigpipeEntry 2 } mpVlanBigpipeNameStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the entry of mpVlanBigPipeTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpVlanBigpipeEntry 3 } -- @013 add START mpVlanBigpipeMode OBJECT-TYPE SYNTAX INTEGER { open(1), clese(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to specify the communication status of BigPipe to VLAN. If the value is set to '1', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are passed. If the value is set to '2', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are filtered. The default value is '1'." ::= { mpVlanBigpipeEntry 4 } -- @013 add END -- the Vlan Intf table mpVlanIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the interface (Ethernet port and logical ELAN port) subsucription to VLAN." ::= { mpVlan 5 } mpVlanIntfEntry OBJECT-TYPE SYNTAX MpVlanIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpVlanIntfTable." INDEX { mpVlanIntfVlanIndex, mpVlanIntfNumber } ::= { mpVlanIntfTable 1 } MpVlanIntfEntry ::= SEQUENCE { mpVlanIntfVlanIndex INTEGER, mpVlanIntfNumber INTEGER, mpVlanIntfStatus INTEGER } mpVlanIntfVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing VLAN to which the interfaces are subscribed. When the equipment is just shipped from factory, all the Ethernet ports are subscribed to the default VLAN." ::= { mpVlanIntfEntry 1 } mpVlanIntfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the Ethernet port number or logical ELAN port number subscribed to this VLAN. The value of this index is the same as ifIndex." ::= { mpVlanIntfEntry 2 } mpVlanIntfStatus OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to register or delete the interface to this VLAN. The value '1' is set to register the interface to this VLAN, and the value '2' is set to delete the interface from this VLAN. When all the interfaces are deleted from this VLAN, the table entry of this VLAN is also deleted." ::= { mpVlanIntfEntry 3 } -- the Vlan Group Intf table mpVlanGroupIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanGroupIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the VLAN subscription to VLAN Group." ::= { mpVlan 6 } mpVlanGroupIntfEntry OBJECT-TYPE SYNTAX MpVlanGroupIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpVlanGroupIntfTable." INDEX { mpVlanGrpIntfIndex, mpVlanGrpIntfVlanIndex } ::= { mpVlanGroupIntfTable 1 } MpVlanGroupIntfEntry ::= SEQUENCE { mpVlanGrpIntfIndex INTEGER, mpVlanGrpIntfVlanIndex INTEGER, mpVlanGrpIntfStatus INTEGER } mpVlanGrpIntfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing VLAN Group to which the VLANs are subscribed." ::= { mpVlanGroupIntfEntry 1 } mpVlanGrpIntfVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VLAN which is subscribed to this VLAN Group." ::= { mpVlanGroupIntfEntry 2 } mpVlanGrpIntfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to register/delete the VLAN to/from this VLAN Group. The value '1' is set to register this VLAN to this VLAN Group, and the value '2' is set to delete this VLAN from this VLAN Group." ::= { mpVlanGroupIntfEntry 3 } -- the Bigpipe Intf table mpVlanBigpipeIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanBigpipeIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the interface (Ethernet port) subscription to BigPipe." ::= { mpVlan 7 } mpVlanBigpipeIntfEntry OBJECT-TYPE SYNTAX MpVlanBigpipeIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpVlanBigPipeIntfTable." INDEX { mpVlanBigpipeIntfIndex, mpVlanBigpipeIntfNumber } ::= { mpVlanBigpipeIntfTable 1 } MpVlanBigpipeIntfEntry ::= SEQUENCE { mpVlanBigpipeIntfIndex INTEGER, mpVlanBigpipeIntfNumber INTEGER, mpVlanBigpipeIntfNumberStatus INTEGER } mpVlanBigpipeIntfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing BigPipe." ::= { mpVlanBigpipeIntfEntry 1 } mpVlanBigpipeIntfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the physical interface (Ethernet port) number subscribed to this BigPipe. The value of this index is the same as the value of ifIndex. The interface which is to be subscribed to BigPipe must not be subscribedany VLAN." ::= { mpVlanBigpipeIntfEntry 2 } mpVlanBigpipeIntfNumberStatus OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to register/delete the interface (Ethernet port) to/from this BigPipe. The value '1' is set to register this interface to this BigPipe, and the value '2' is set to delete this interface from this BigPipe." ::= { mpVlanBigpipeIntfEntry 3 } -- the Vlan Mac table mpVlanMacTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of MAC address data of the VLAN." ::= { mpVlan 8 } mpVlanMacEntry OBJECT-TYPE SYNTAX MpVlanMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpVlanMacTable." INDEX { mpVlanMacVlanIndex, mpVlanMacAddress } ::= { mpVlanMacTable 1 } MpVlanMacEntry ::= SEQUENCE { mpVlanMacVlanIndex INTEGER, mpVlanMacAddress MacAddress, mpVlanMacIntfNumber INTEGER, mpVlanMacStatus INTEGER } mpVlanMacVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing VLAN. The value of this object is the VLAN number." ::= { mpVlanMacEntry 1 } mpVlanMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object is the MAC address which is included in this VLAN." ::= { mpVlanMacEntry 2 } mpVlanMacIntfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is the Ethernet port number or logical ELAN number, from which the frame with source MAC address included in this VLAN can be received.This interface must belong to this VLAN. This object is set to '0' when no port is specified." ::= { mpVlanMacEntry 3 } mpVlanMacStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the entry of this table. The value '1' is set to create the entry, and the value '2' is set to deletethe entry." ::= { mpVlanMacEntry 4 } -- Bigpipe Vid Control table mpVlanBigpipeVidControlTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanBigpipeVidControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the filter condition concerning to VID for BigPipe." ::= { mpVlan 9 } mpVlanBigpipeVidControlEntry OBJECT-TYPE SYNTAX MpVlanBigpipeVidControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpVlanBigpipeVidControlTable." INDEX { mpVlanBigpipeVidControlIndex, mpVlanBigpipeVidControlVid } ::= { mpVlanBigpipeVidControlTable 1 } MpVlanBigpipeVidControlEntry ::= SEQUENCE { mpVlanBigpipeVidControlIndex INTEGER, mpVlanBigpipeVidControlVid INTEGER, mpVlanBigpipeVidControlStatus INTEGER } mpVlanBigpipeVidControlIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the BigPipe to which this filter condition is applied." ::= { mpVlanBigpipeVidControlEntry 1 } mpVlanBigpipeVidControlVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the VID of VLAN or VLAN Group, to which this filter condition is applied." ::= { mpVlanBigpipeVidControlEntry 2 } mpVlanBigpipeVidControlStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to register/delete the VID filter condition for BigPipe. The value '1' is set to register the filter condition, and the value '2' is set to delete the filter condition." ::= { mpVlanBigpipeVidControlEntry 3 } -- Forwarding Data Base table mpVlanTpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanTpFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about forwarding database per VLAN." ::= { mpVlan 10 } mpVlanTpFdbEntry OBJECT-TYPE SYNTAX MpVlanTpFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about forwarding database per VLAN." INDEX { mpVlanTpFdbVlanIndex, mpVlanTpFdbMacAddress } ::= { mpVlanTpFdbTable 1 } MpVlanTpFdbEntry ::= SEQUENCE { mpVlanTpFdbVlanIndex INTEGER, mpVlanTpFdbMacAddress MacAddress, mpVlanTpFdbIntfNumber INTEGER, mpVlanTpFdbStatus INTEGER } mpVlanTpFdbVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the VLAN number to specify the forwarding database per VLAN." ::= { mpVlanTpFdbEntry 1 } mpVlanTpFdbMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the destination MAC Address which belongs to the forwarding information of this VLAN." ::= { mpVlanTpFdbEntry 2 } mpVlanTpFdbIntfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Either the value '0', or the port number of the port from which the frame, which has a source address equal to the value of the 'mpVlanTPFdbMacAddress', was received. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding information about this address." ::= { mpVlanTpFdbEntry 3 } mpVlanTpFdbStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of this entry. If it is '1', this entry is none of the following. If it is '2', this entry is not longer valie, but has not yet been flushed from the table. If it is '3', this entry was learned, and is being used. If it is '4', this entry is the bridge's MAC addresses. If it is '5', this entry is the MAC address which was registered as filtering condition." ::= { mpVlanTpFdbEntry 4 } mpVlanTagProtocolId OBJECT-TYPE SYNTAX INTEGER (1501..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates VLAN Tag Protocol ID used in this system. Range of VLAN Tag Protocol ID is from 1501(0x05dd) to 65535(0xffff) except 2048(0x0800), 2054(0x0806)." ::= { mpVlan 11 } -- @014 add START mpVlanTagPpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpVlanTagPpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "It is used for VLAN Tag PP(Point-to-Point) configuration." ::= { mpVlan 12 } mpVlanTagPpEntry OBJECT-TYPE SYNTAX MpVlanTagPpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table entry of the VLAN Tag PP configuration." INDEX { mpVlanTagPpIndex } ::= { mpVlanTagPpTable 1 } MpVlanTagPpEntry ::= SEQUENCE { mpVlanTagPpIndex INTEGER, mpVlanTagPpRtrIndex INTEGER, mpVlanTagPpIntfNumber INTEGER, mpVlanTagPpName DisplayString, mpVlanTagPpMacType INTEGER, mpVlanTagPpNameStatus INTEGER } mpVlanTagPpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the specified number to identify the VLAN Tag PP." ::= { mpVlanTagPpEntry 1 } mpVlanTagPpRtrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the interface number assigned to the VLAN Tag PP uniquely, within the equipment. The VLAN Tag PP identified by this object is the same VLAN Tag PP identified by the same number of ifIndex." ::= { mpVlanTagPpEntry 2 } mpVlanTagPpIntfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the index to identify the Ethernet port number or PPP port number subscribed to this VLAN Tag PP. The value of this index is the same as ifIndex." ::= { mpVlanTagPpEntry 3 } mpVlanTagPpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the name which is assigned to the VLAN Tag PP for administrative purpose. It is used to assign or change the name of VLAN Tag PP." ::= { mpVlanTagPpEntry 4 } mpVlanTagPpMacType OBJECT-TYPE SYNTAX INTEGER { global(1), private(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the MAC address type. If the value is set to '1', global MAC address of the physical port is used. If the value is set to '2', private MAC address given by user (first 4 octets) is used. In case of 2, the last two octets is given by the value of the mpVlanTagPpIndex." ::= { mpVlanTagPpEntry 5 } mpVlanTagPpNameStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to register or delete the VLAN Tag PP." ::= { mpVlanTagPpEntry 6 } -- @014 add END -- *************************************************************************** -- the MM_Node9110/9120 Bridge Group -- *************************************************************************** -- Destination Mac Filter table mpBrgDestMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF MpBrgDestMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the filter condition concerning to the destination MAC address." ::= { mpBridge 1 } mpBrgDestMacFilterEntry OBJECT-TYPE SYNTAX MpBrgDestMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpBrgDestMacFilterTable." INDEX { mpBrgDestMacFilterVlanIndex, mpBrgDestMacFilterAddress } ::= { mpBrgDestMacFilterTable 1 } MpBrgDestMacFilterEntry ::= SEQUENCE { mpBrgDestMacFilterVlanIndex INTEGER, mpBrgDestMacFilterAddress MacAddress, mpBrgDestMacFilterStatus INTEGER } mpBrgDestMacFilterVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VLAN to which this filter condition is applied." ::= { mpBrgDestMacFilterEntry 1 } mpBrgDestMacFilterAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object is the destination MAC address which is filtered in this VLAN." ::= { mpBrgDestMacFilterEntry 2 } mpBrgDestMacFilterStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpBrgDestMacFilterEntry 3 } -- Source Mac Filter table mpBrgSrcMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF MpBrgSrcMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the filter condition concerning to the source MAC address." ::= { mpBridge 2 } mpBrgSrcMacFilterEntry OBJECT-TYPE SYNTAX MpBrgSrcMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpBrgSrcMacFilterTable." INDEX { mpBrgSrcMacFilterVlanIndex, mpBrgSrcMacFilterAddress } ::= { mpBrgSrcMacFilterTable 1 } MpBrgSrcMacFilterEntry ::= SEQUENCE { mpBrgSrcMacFilterVlanIndex INTEGER, mpBrgSrcMacFilterAddress MacAddress, mpBrgSrcMacFilterStatus INTEGER } mpBrgSrcMacFilterVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VLAN to which this filter condition is applied." ::= { mpBrgSrcMacFilterEntry 1 } mpBrgSrcMacFilterAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object is the source MAC address which is filtered in this VLAN." ::= { mpBrgSrcMacFilterEntry 2 } mpBrgSrcMacFilterStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpBrgSrcMacFilterEntry 3 } -- Destination Port Filter table mpBrgDestPortFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF MpBrgDestPortFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type ofject of the filter condition concerning to the destination port." ::= { mpBridge 3 } mpBrgDestPortFilterEntry OBJECT-TYPE SYNTAX MpBrgDestPortFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpBrgDestPortFilterTable." INDEX { mpBrgDestPortFilterIfIndex } ::= { mpBrgDestPortFilterTable 1 } MpBrgDestPortFilterEntry ::= SEQUENCE { mpBrgDestPortFilterIfIndex INTEGER, mpBrgDestPortFilterStatus INTEGER } mpBrgDestPortFilterIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the destination port to which the filtering function is applied. The value of this index is the same as IfIndex." ::= { mpBrgDestPortFilterEntry 1 } mpBrgDestPortFilterStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpBrgDestPortFilterEntry 2 } -- Source Port Filter table mpBrgSrcPortFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF MpBrgSrcPortFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type ofject of the filter condition concerning to the source port." ::= { mpBridge 4 } mpBrgSrcPortFilterEntry OBJECT-TYPE SYNTAX MpBrgSrcPortFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpBrgSrcPortFilterTable." INDEX { mpBrgSrcPortFilterIfIndex } ::= { mpBrgSrcPortFilterTable 1 } MpBrgSrcPortFilterEntry ::= SEQUENCE { mpBrgSrcPortFilterIfIndex INTEGER, mpBrgSrcPortFilterStatus INTEGER } mpBrgSrcPortFilterIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the source port to which the filtering function is applied. The value of this index is the same as IfIndex." ::= { mpBrgSrcPortFilterEntry 1 } mpBrgSrcPortFilterStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpBrgSrcPortFilterEntry 2 } -- *************************************************************************** -- the MM_Node9110/9120 Database Access Group -- 10/23/1998 add mpDbAccessAllSave @001 -- 12/21/1998 add mpDbAccessAllSave @002 -- *************************************************************************** -- Implementation of this group is mandatory for all the SANFRAN systems. mpDbAccessSave OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Signal the system applications to save their config." -- save処理を実行する場合は1を指定する。save処理実行中は -- 2を返す。2を指定した場合は、何も処理を行わずにsuccessを -- 返す。" ::= { mpDbAccess 1 } mpDbAccessAllSave OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Signal the system applications to save their all config." -- save all処理を実行する場合は1を指定する。save all処理実行中は -- 2を返す。2を指定した場合は、何も処理を行わずにsuccessを -- 返す。" ::= { mpDbAccess 2 } -- **************************************************************************** -- Event Log MIB Objects -- 10/23/1998 all overwrite @001 -- **************************************************************************** -- Implementation of this group is mandatory for all the SANFRAN systems. -- Scalar objects mpEventLogAttribute OBJECT-TYPE SYNTAX INTEGER { wraparound (1), discardnewevents (2), newlog (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the type of logging for the events." ::= { mpEventLog 1 } mpEventLogSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the log size." ::= { mpEventLog 2 } mpEventLoggingFilter OBJECT-TYPE SYNTAX INTEGER -- 0x01 (bit 0) for CRITICAL -- 0x02 (bit 1) for MAJOR -- 0x04 (bit 2) for MINOR -- 0x08 (bit 3) for WARNING -- 0x10 (bit 4) for INFORMATIONAL ACCESS read-write STATUS mandatory DESCRIPTION "Specifies filtering to be applied to incoming events. Bit mapped." ::= { mpEventLog 3 } mpEventLogEarliestEvent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the index of the earliest event in the log." ::= { mpEventLog 4 } mpEventLogLatestEvent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the index of the latest event in the log." ::= { mpEventLog 5 } mpEventLogNumEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the number of entries in the log." ::= { mpEventLog 6 } mpEventLogCriticalEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of critical events in the log." ::= { mpEventLog 7 } mpEventLogMajorEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of major events in the log." ::= { mpEventLog 8 } mpEventLogMinorEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of minor events in the log." ::= { mpEventLog 9 } mpEventLogWarningEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of warning events in the log." ::= { mpEventLog 10 } mpEventLogInformationalEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of informational events in the log." ::= { mpEventLog 11 } mpEventLogClearAll OBJECT-TYPE SYNTAX INTEGER { clear (1), noaction (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the log if set to clear." ::= { mpEventLog 12 } mpEventLogClearSeverity OBJECT-TYPE SYNTAX INTEGER { critical (1), major (2), minor (3), warning (4), informational (5), noaction (6) } ACCESS read-write STATUS mandatory DESCRIPTION "Deletes entries in the log with specified severity." ::= { mpEventLog 13 } mpEventLogClearPeriod OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Deletes entries in the log within the specified period. format : yyyy/[m]m/[d]d yyyy/m[m]/[d]d yyyy year mm month dd day " ::= { mpEventLog 14 } -- Tabular objects mpEventTable OBJECT-TYPE SYNTAX SEQUENCE OF MpEventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Event related details." ::= { mpEventLog 15 } mpEventEntry OBJECT-TYPE SYNTAX MpEventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Details for particular event." INDEX { mpEventIndex } ::= { mpEventTable 1 } MpEventEntry ::= SEQUENCE { mpEventIndex INTEGER, mpEventSource INTEGER, mpEventCode INTEGER, mpEventTimeStamp DisplayString, mpEventSeverity INTEGER, mpEventDescription DisplayString } mpEventIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Index to the event in the table." ::= { mpEventEntry 1 } mpEventSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates any code that may be associated with the source of the event. If no source is associated defaults to 0." ::= { mpEventEntry 2 } mpEventCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates any code that may be associated with the event for further details. If no code is associated defaults to 0." ::= { mpEventEntry 3 } mpEventTimeStamp OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp of the event." ::= { mpEventEntry 4 } mpEventSeverity OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), informational(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates event severity." ::= { mpEventEntry 5 } mpEventDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Brief description of the recorded event." ::= { mpEventEntry 6 } mpTrapFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF MpTrapFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of Trap Filter Information." ::= { mpEventLog 16 } mpTrapFilterEntry OBJECT-TYPE SYNTAX MpTrapFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of Trap Filter Information." INDEX { mpTrapFilterEnterprise, mpTrapFilterGeneric, mpTrapFilterSpecific } ::= { mpTrapFilterTable 1 } MpTrapFilterEntry ::= SEQUENCE { mpTrapFilterGeneric INTEGER, mpTrapFilterSpecific INTEGER, mpTrapFilterEnterprise OBJECT IDENTIFIER, mpTrapFilterStatus INTEGER, mpTrapFilterName DisplayString } mpTrapFilterGeneric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the generic-trap to identify the trap to which this filter condition is applied." ::= { mpTrapFilterEntry 1 } mpTrapFilterSpecific OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the specific-trap to identify the trap to which this filter condition is applied." ::= { mpTrapFilterEntry 2 } mpTrapFilterEnterprise OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the enterprise-trap to identify the trap to which this filter condition is applied." ::= { mpTrapFilterEntry 3 } mpTrapFilterStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies validity of trap filter." ::= { mpTrapFilterEntry 4 } mpTrapFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object is the name of the trap to be displayed." ::= { mpTrapFilterEntry 5 } mpEventTrapSeverityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpEventTrapSeverityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Control Severity of Trap" --トラップの重要度情報を管理する ::= { mpEventLog 17 } mpEventTrapSeverityEntry OBJECT-TYPE SYNTAX MpEventTrapSeverityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "severity of SpecificTrap" --特定トラップの重要度情報 INDEX { mpEventTrapSeverityIndex } ::= { mpEventTrapSeverityTable 1 } MpEventTrapSeverityEntry ::= SEQUENCE { mpEventTrapSeverityIndex INTEGER, mpEventTrapCode INTEGER, mpEventTrapSeverity INTEGER, mpEventTrapDescription DisplayString } mpEventTrapSeverityIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Index of Trap Severity Table" --トラップ重要度テーブルのインデックス ::= { mpEventTrapSeverityEntry 1 } mpEventTrapCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EventCode" --イベントコード ::= { mpEventTrapSeverityEntry 2 } mpEventTrapSeverity OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), informational(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Severity of Trap" --トラップの重要度 ::= { mpEventTrapSeverityEntry 3 } mpEventTrapDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Information of Trap" --トラップの簡潔な情報 ::= { mpEventTrapSeverityEntry 4 } mpEventLogAlmRenewalTimeStamp OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of Alm State Change" --ALMの状態変化が発生した時刻 ::= { mpEventLog 18 } -- *************************************************************************** -- the SanFran UISM Group -- *************************************************************************** mpUiSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF MpUiSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table that describes active connections." ::= { mpUiSession 1 } mpUiSessionEntry OBJECT-TYPE SYNTAX MpUiSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes each node in the session table. " INDEX { mpUiSessionPort } ::= { mpUiSessionTable 1 } MpUiSessionEntry ::= SEQUENCE { mpUiSessionPort INTEGER, mpUiSessionTime INTEGER, mpUiSessionUserStatus INTEGER, mpUiSessionStatus INTEGER } mpUiSessionPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The telnet port/async port that the session is using. " ::= { mpUiSessionEntry 1 } mpUiSessionTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The starting time of the session " ::= { mpUiSessionEntry 2 } mpUiSessionUserStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), operator (2), supervisor (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the session user. " ::= { mpUiSessionEntry 3 } mpUiSessionStatus OBJECT-TYPE SYNTAX INTEGER{ valid (1), invalid (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Session validity " ::= { mpUiSessionEntry 4 } -- *************************************************************************** -- the MM_Node9110/9120 FTP Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. mpFtpServerStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the operating status of FTP server. The value '1' is set to enable the FTP server functionality, and the value '2' is set to disable the FTP server functionality." ::= { mpFtp 1 } -- *************************************************************************** -- the MM_Node9110/9120 DHCP/BOOTP Group -- *************************************************************************** -- Implementation of this group is mandatory for -- all the MM_Node9110/9120 systems. mpDhcpRelayRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of the total number of received Dhcp Relay request." ::= { mpDhcp 1 } mpDhcpRelayReplys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of received Dhcp Relay reply." ::= { mpDhcp 2 } mpDhcpRelayRequestDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of discarded Dhcp Relay request." ::= { mpDhcp 3 } mpDhcpRelayReplyDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of discareded Dhcp Relay reply." ::= { mpDhcp 4 } mpDhcpRelayEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only -- ACCESS read-write STATUS mandatory DESCRIPTION "The current operational state of the Dhcp Relay Agent. This object is changed to '1' automatically, when mpDhcpRelayIfTable is created initially. Vice versa, this object is changed to '2' automatically, when mpDhcpRelayIfTable is deleted lastly. The default value of this object is '2'." ::= { mpDhcp 5 } mpDhcpRelayMaxHops OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the maximum number of the hop count of Dhcp Relay Agent. The value of this object must be within the range of 1 - 16. The default value of this object is 4." ::= { mpDhcp 6 } -- @020 the BOOTP/DHCP relay destination IP address table -- @020 mpDhcpRelayTable OBJECT-TYPE -- @020 SYNTAX SEQUENCE OF MpDhcpRelayEntry -- @020 ACCESS not-accessible -- @020 STATUS mandatory -- @020 DESCRIPTION "This is the table type object of the Dhcp Relay -- @020 Agent data." -- @020 ::= { mpDhcp 7 } -- @020 mpDhcpRelayEntry OBJECT-TYPE -- @020 SYNTAX MpDhcpRelayEntry -- @020 ACCESS not-accessible -- @020 STATUS mandatory -- @020 DESCRIPTION "This object is the table entry of -- @020 mpDhcpRelayTable." -- @020 INDEX { mpDhcpRelayEntIfIndex } -- @020 ::= { mpDhcpRelayTable 1 } -- @020 MpDhcpRelayEntry ::= -- @020 SEQUENCE { -- @020 mpDhcpRelayEntIfIndex -- @020 INTEGER, -- @020 mpDhcpRelayEntAddr -- @020 IpAddress, -- @020 mpDhcpRelayEntStatus -- @020 INTEGER -- @020 } -- @020 mpDhcpRelayEntIfIndex OBJECT-TYPE -- @020 SYNTAX INTEGER -- @020 ACCESS read-only -- @020 STATUS mandatory -- @020 DESCRIPTION "This is the index to identify the VLAN/LIS -- @020 interface. The value of this index is the same as -- @020 ifIndex." -- @020 ::= { mpDhcpRelayEntry 1 } -- @020 mpDhcpRelayEntAddr OBJECT-TYPE -- @020 SYNTAX IpAddress -- @020 ACCESS read-write -- @020 STATUS mandatory -- @020 DESCRIPTION "This object specifies the relaying destination IP -- @020 address." -- @020 ::= { mpDhcpRelayEntry 2 } -- @020 mpDhcpRelayEntStatus OBJECT-TYPE -- @020 SYNTAX INTEGER { -- @020 valid(1), -- @020 invalid(2) -- @020 } -- @020 ACCESS read-write -- @020 STATUS mandatory -- @020 DESCRIPTION "This object is used to create or delete the table -- @020 entry. The value '1' is set to create the entry, -- @020 and the value '2' is set to delete the entry." -- @020 ::= { mpDhcpRelayEntry 3 } -- @020 add from -- the BOOTP/DHCP relay interface table mpDhcpRelayIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpDhcpRelayIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the Dhcp Relay Agent interface data." ::= { mpDhcp 8 } mpDhcpRelayIfEntry OBJECT-TYPE SYNTAX MpDhcpRelayIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is the table entry of mpDhcpRelayIfTable." INDEX { mpDhcpRelayIfEntIfIndex } ::= { mpDhcpRelayIfTable 1 } MpDhcpRelayIfEntry ::= SEQUENCE { mpDhcpRelayIfEntIfIndex INTEGER, mpDhcpRelayIfEntTransMode INTEGER, mpDhcpRelayIfEntRequests Counter, mpDhcpRelayIfEntReplies Counter, mpDhcpRelayIfEntRequestTransmits Counter, mpDhcpRelayIfEntRequestDiscards Counter, mpDhcpRelayIfEntReplyDiscards Counter, mpDhcpRelayIfEntStatus INTEGER } mpDhcpRelayIfEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the router interface. The value of this index is the same as ifIndex." ::= { mpDhcpRelayIfEntry 1 } mpDhcpRelayIfEntTransMode OBJECT-TYPE SYNTAX INTEGER { all1(1), all2(2), roundrobin(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of Transfer Mode. The default value of this object is '1'." ::= { mpDhcpRelayIfEntry 2 } mpDhcpRelayIfEntRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of the total number of received BOOTP-REQUEST from this interface." ::= { mpDhcpRelayIfEntry 3 } mpDhcpRelayIfEntReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of attempt to transmit BOOTP-REPLY to this interface." ::= { mpDhcpRelayIfEntry 4 } mpDhcpRelayIfEntRequestTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of the total number of transmitted BOOTP-REQUEST." ::= { mpDhcpRelayIfEntry 5 } mpDhcpRelayIfEntRequestDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of discarded BOOTP-REQUEST." ::= { mpDhcpRelayIfEntry 6 } mpDhcpRelayIfEntReplyDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the counter of the total number of discareded BOOTP-REPLY." ::= { mpDhcpRelayIfEntry 7 } mpDhcpRelayIfEntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpDhcpRelayIfEntry 8 } -- the BOOTP/DHCP relay destination IP address table mpDhcpRelayAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpDhcpRelayAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the Dhcp Relay Agent Destination IP Address data." ::= { mpDhcp 9 } mpDhcpRelayAddrEntry OBJECT-TYPE SYNTAX MpDhcpRelayAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is the table entry of mpDhcpRelayAddrTable." INDEX { mpDhcpRelayAddrEntIfIndex, mpDhcpRelayAddrEntAddr } ::= { mpDhcpRelayAddrTable 1 } MpDhcpRelayAddrEntry ::= SEQUENCE { mpDhcpRelayAddrEntIfIndex INTEGER, mpDhcpRelayAddrEntAddr IpAddress, mpDhcpRelayAddrEntStatus INTEGER } mpDhcpRelayAddrEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the index to identify the router interface. The value of this index is the same as ifIndex." ::= { mpDhcpRelayAddrEntry 1 } mpDhcpRelayAddrEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the relaying destination IP address." ::= { mpDhcpRelayAddrEntry 2 } mpDhcpRelayAddrEntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry." ::= { mpDhcpRelayAddrEntry 3 } -- @020 add end -- *************************************************************************** -- the MM_Node9110/9120 IP Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. -- @015 the IP address table -- @015 mpIpAddrTable OBJECT-TYPE -- @015 SYNTAX SEQUENCE OF MpIpAddrEntry -- @015 ACCESS not-accessible -- @015 STATUS mandatory -- @015 DESCRIPTION "The table of addressing information relevant to -- @015 this entity's IP addresses." -- @015 ::= { mpIp 1 } -- @015 mpIpAddrEntry OBJECT-TYPE -- @015 SYNTAX MpIpAddrEntry -- @015 ACCESS not-accessible -- @015 STATUS mandatory -- @015 DESCRIPTION "The addressing information for one of this -- @015 entity's IP addresses." -- @015 INDEX { mpIpAdEntAddr, -- @015 mpIpAdEntIfIndex } -- @015 ::= { mpIpAddrTable 1 } -- @015 MpIpAddrEntry ::= -- @015 SEQUENCE { -- @015 mpIpAdEntAddr -- @015 IpAddress, -- @015 mpIpAdEntIfIndex -- @015 INTEGER, -- @015 mpIpAdEntNetMask -- @015 IpAddress, -- @015 mpIpAdEntBcastAddr -- @015 INTEGER, -- @015 mpIpAdEntStatus -- @015 INTEGER, -- @015 mpIpAdEntEncapType -- @015 INTEGER, -- @015 mpIpAdEntForwarding -- @015 INTEGER, -- @008 mpIpAdEntInOffsetIface -- @008 INTEGER, -- @008 mpIpAdEntOutOffsetIface -- @008 INTEGER -- @008 add from -- @015 mpIpAdEntArpTimeOut -- @015 INTEGER, -- @015 mpIpAdEntIcmpRedirectStatus -- @015 INTEGER -- @008 add end -- @015 } -- @015 mpIpAdEntAddr OBJECT-TYPE -- @015 SYNTAX IpAddress -- @015 ACCESS read-only -- @015 STATUS mandatory -- @015 DESCRIPTION "The IP address to which this entry's addressing -- @015 information pertains. This IP address must always -- @015 be a unicast IP address and it should never be a -- @015 Class D or E IP address." -- @015 ::= { mpIpAddrEntry 1 } -- @015 mpIpAdEntIfIndex OBJECT-TYPE -- @015 SYNTAX INTEGER -- @015 ACCESS read-only -- @015 STATUS mandatory -- @015 DESCRIPTION "The index value which uniquely identifies the -- @015 interface to which this entry is applicable. The -- @015 interface referred by a particular value of this -- @015 index is the same interface as identified by the -- @015 same value of ifIndex." -- @015 ::= { mpIpAddrEntry 2 } -- @015 mpIpAdEntNetMask OBJECT-TYPE -- @015 SYNTAX IpAddress -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "The subnet mask associated with the IP address of -- @015 this entry. The value of this object is an IP -- @015 address with the network part bits set to all 1's -- @015 and all the hosts part bits set to all 0's." -- @015 ::= { mpIpAddrEntry 3 } -- @015 mpIpAdEntBcastAddr OBJECT-TYPE -- @015 SYNTAX INTEGER -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "The value of this object is the broadcast IP -- @015 address for this entry. The broadcast IP address -- @015 is the the IP address with the host part bits -- @015 set to all 1's or all 0's." -- @015 ::= { mpIpAddrEntry 4 } -- @015 mpIpAdEntStatus OBJECT-TYPE -- @015 SYNTAX INTEGER { -- @015 valid(1), -- @015 invalid(2) -- @015 } -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "When an entry is created it autmatically becomes -- @015 valid(1). When this object is set to invalid(2) -- @015 then this entry will be deleted." -- @015 ::= { mpIpAddrEntry 5 } -- @015 mpIpAdEntEncapType OBJECT-TYPE -- @015 SYNTAX INTEGER { -- @015 none(1), -- @015 dix(2), -- @015 snap(3) -- @015 } -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "This object refers to the encapsulation type -- @015 for the interface of this entry. For VLAN -- @015 interfaces the encapsulation type can only be -- @015 set to dix(2) or snap(3). For LIS interfaces -- @015 the encapsulation type can only be set to -- @015 none(1)." -- @015 ::= { mpIpAddrEntry 6 } -- @015 mpIpAdEntForwarding OBJECT-TYPE -- @015 SYNTAX INTEGER { -- @015 forwarding(1), -- @015 not-forwarding(2) -- @015 } -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "This object indicates operation for data gram. -- @015 to forwarding(1). When this interface is IP host, -- @015 this object is set to not-forwarding(2)." -- @015 ::= { mpIpAddrEntry 7 } -- @008 mpIpAdEntInOffsetIface OBJECT-TYPE -- @008 SYNTAX INTEGER (0..15) -- @008 ACCESS read-write -- @008 STATUS mandatory -- @008 DESCRIPTION "The value of this object is offset which is -- @008 added to RIP receiving data. The range of value -- @008 is from 0 to 15. The dafault value is 0" -- @008 ::= { mpIpAddrEntry 8 } -- @008 mpIpAdEntOutOffsetIface OBJECT-TYPE -- @008 SYNTAX INTEGER (0..15) -- @008 ACCESS read-write -- @008 STATUS mandatory -- @008 DESCRIPTION "The value of this object is offset which is -- @008 added to RIP receiving data. The range of value -- @008 is from 0 to 15. The dafault value is 0" -- @008 ::= { mpIpAddrEntry 9 } -- @008 add from -- @015 mpIpAdEntArpTimeOut OBJECT-TYPE -- @015 SYNTAX INTEGER (0..2147483647) -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "Effective time of the Dynamic IP ARP table -- @015 (ipNetToMediaTable). The value 0 means infinity." -- @015 ::= { mpIpAddrEntry 10 } -- @015 mpIpAdEntIcmpRedirectStatus OBJECT-TYPE -- @015 SYNTAX INTEGER { -- @015 enabled(1), -- @015 disabled(2) -- @015 } -- @015 ACCESS read-write -- @015 STATUS mandatory -- @015 DESCRIPTION "This object indicates whether an ICMP redirect -- @015 message is transmitted to this Interface." -- @015 ::= { mpIpAddrEntry 11 } -- @008 add end -- the IP routing table -- @008 mpIpRouteTable OBJECT-TYPE -- @008 SYNTAX SEQUENCE OF MpIpRouteEntry -- @008 ACCESS not-accessible -- @008 STATUS mandatory -- @008 DESCRIPTION "This is the table type object of priprity data of -- @008 IP routing information." -- @008 ::= { mpIp 2 } -- @008 mpIpRouteEntry OBJECT-TYPE -- @008 SYNTAX MpIpRouteEntry -- @008 ACCESS not-accessible -- @008 STATUS mandatory -- @008 DESCRIPTION "This is the table entry of mpIpRouteTable." -- @008 INDEX { mpIpRouteDest } -- @008 ::= { mpIpRouteTable 1 } -- @008 MpIpRouteEntry ::= -- @008 SEQUENCE { -- @008 mpIpRouteDest -- @008 IpAddress, -- @008 mpIpRouteEntPriority -- @008 INTEGER -- @008 } -- @008 mpIpRouteDest OBJECT-TYPE -- @008 SYNTAX IpAddress -- @008 ACCESS read-only -- @008 STATUS mandatory -- @008 DESCRIPTION "This object identifies the destination IP address -- @008 of the entry." -- @008 ::= { mpIpRouteEntry 1 } -- @008 mpIpRouteEntPriority OBJECT-TYPE -- @008 SYNTAX INTEGER { -- @008 other(1), -- @008 static(2), -- @008 float(3) -- @008 } -- @008 ACCESS read-write -- @008 STATUS mandatory -- @008 DESCRIPTION "This object specifies the priority corresponding -- @008 to this destination IP address. In case of static -- @008 registration, the value '1' is set to this object. -- @008 In case of floating condition, the value '2' is -- @008 set to this object." -- @008 ::= { mpIpRouteEntry 2 } -- IP Filter Exclude table mpIpFilterExcludeTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpFilterExcludeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of IP address excluding filter condition. Table of Exclude IP Filter." ::= { mpIp 3 } mpIpFilterExcludeEntry OBJECT-TYPE SYNTAX MpIpFilterExcludeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpIpFilterExcludeTable. Exclude IP Filter fields." INDEX { mpIpFilterExEntIndex } ::= { mpIpFilterExcludeTable 1 } MpIpFilterExcludeEntry ::= SEQUENCE { mpIpFilterExEntIndex INTEGER, mpIpFilterExEntInIfIndex INTEGER, mpIpFilterExEntOutIfIndex INTEGER, mpIpFilterExEntSrcIpAddr IpAddress, mpIpFilterExEntSrcAddrMask IpAddress, mpIpFilterExEntDestIpAddr IpAddress, mpIpFilterExEntDestAddrMask IpAddress, mpIpFilterExEntIpOptions INTEGER, mpIpFilterExEntIpProcNumber INTEGER, mpIpFilterExEntSrcPort INTEGER, mpIpFilterExEntDestPort INTEGER, mpIpFilterExEntTcpAckOffSegment INTEGER, mpIpFilterExEntIcmpSend INTEGER, mpIpFilterExEntEventLogging INTEGER, mpIpFilterExEntStatus RowStatus } mpIpFilterExEntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the IP address excluding filter entry." ::= { mpIpFilterExcludeEntry 1 } mpIpFilterExEntInIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the input interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface." ::= { mpIpFilterExcludeEntry 2 } mpIpFilterExEntOutIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the output interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface." ::= { mpIpFilterExcludeEntry 3 } mpIpFilterExEntSrcIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the source IP address to which the excluding filter is applied." ::= { mpIpFilterExcludeEntry 4 } mpIpFilterExEntSrcAddrMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored." ::= { mpIpFilterExcludeEntry 5 } mpIpFilterExEntDestIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the destination IP address to which the excluding filter is applied." ::= { mpIpFilterExcludeEntry 6 } mpIpFilterExEntDestAddrMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored." ::= { mpIpFilterExcludeEntry 7 } mpIpFilterExEntIpOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the IP option to which the excluding filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object." ::= { mpIpFilterExcludeEntry 8 } mpIpFilterExEntIpProcNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This obeject specifies the protocol to which the excluding filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object." ::= { mpIpFilterExcludeEntry 9 } mpIpFilterExEntSrcPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the receiving TCP/UDP port number to which the excluding filter is applied." ::= { mpIpFilterExcludeEntry 10 } mpIpFilterExEntDestPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the sending TCP/UDP port number to which the excluding filter is applied." ::= { mpIpFilterExcludeEntry 11 } mpIpFilterExEntTcpAckOffSegment OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object." ::= { mpIpFilterExcludeEntry 12 } mpIpFilterExEntIcmpSend OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the ICMP(error) sending method when a packet is discarded by IP filtering function. In case of sending ICMP error packet, the value '1' is set to this object. In case of not sending ICMP error packet, the value '2' is set to this object." ::= { mpIpFilterExcludeEntry 13 } mpIpFilterExEntEventLogging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the event handling method when a packet is discarded by IP filtering function. In case of reporting it by event, the value '1' is set to this object. In case of not reporting it by event, the value '2' is set to this object." ::= { mpIpFilterExcludeEntry 14 } mpIpFilterExEntStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify this table entry." ::= { mpIpFilterExcludeEntry 15 } -- IP Filter Include table mpIpFilterIncludeTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpFilterIncludeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of IP pass-filter condition data." ::= { mpIp 4 } mpIpFilterIncludeEntry OBJECT-TYPE SYNTAX MpIpFilterIncludeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpIpFilterIncludeTable." INDEX { mpIpFilterInEntIndex } ::= { mpIpFilterIncludeTable 1 } MpIpFilterIncludeEntry ::= SEQUENCE { mpIpFilterInEntIndex INTEGER, mpIpFilterInEntInIfIndex INTEGER, mpIpFilterInEntOutIfIndex INTEGER, mpIpFilterInEntSrcIpAddr IpAddress, mpIpFilterInEntSrcAddrMask IpAddress, mpIpFilterInEntDestIpAddr IpAddress, mpIpFilterInEntDestAddrMask IpAddress, mpIpFilterInEntIpOptions INTEGER, mpIpFilterInEntIpProcNumber INTEGER, mpIpFilterInEntSrcPort INTEGER, mpIpFilterInEntDestPort INTEGER, mpIpFilterInEntTcpAckOffSegment INTEGER, mpIpFilterInEntLifeTime INTEGER, mpIpFilterInEntStatus RowStatus } mpIpFilterInEntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the IP pass-filter condition table entry." ::= { mpIpFilterIncludeEntry 1 } mpIpFilterInEntInIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the input interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface." ::= { mpIpFilterIncludeEntry 2 } mpIpFilterInEntOutIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the output interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface." ::= { mpIpFilterIncludeEntry 3 } mpIpFilterInEntSrcIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the source IP address to which the IP pass-filter is applied." ::= { mpIpFilterIncludeEntry 4 } mpIpFilterInEntSrcAddrMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specified the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored." ::= { mpIpFilterIncludeEntry 5 } mpIpFilterInEntDestIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the destination IP address to which the IP pass-filter is applied." ::= { mpIpFilterIncludeEntry 6 } mpIpFilterInEntDestAddrMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specified the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored." ::= { mpIpFilterIncludeEntry 7 } mpIpFilterInEntIpOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the IP option to which the IP pass-filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object." ::= { mpIpFilterIncludeEntry 8 } mpIpFilterInEntIpProcNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This obeject specifies the protocol to which the IP pass-filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object." ::= { mpIpFilterIncludeEntry 9 } mpIpFilterInEntSrcPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the receiving TCP/UDP port number to which the IP pass-filter is applied." ::= { mpIpFilterIncludeEntry 10 } mpIpFilterInEntDestPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the sending TCP/UDP port number to which the IP pass-filter is applied." ::= { mpIpFilterIncludeEntry 11 } mpIpFilterInEntTcpAckOffSegment OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object." ::= { mpIpFilterIncludeEntry 12 } mpIpFilterInEntLifeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the valid time period of this IP pass-filter condition. When the valid time period expired, this entry is deleted automatically. In case of setting the value '0' to this object, this IP pass-filter condition lasts until it is deleted by operator command." ::= { mpIpFilterIncludeEntry 13 } mpIpFilterInEntStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify this table entry." ::= { mpIpFilterIncludeEntry 14 } -- IP Filter Statistics mpIpInFilterDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of total number of the receiving packets discarded by this IP filter." ::= { mpIp 5 } mpIpOutFilterDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of total number of the receiving packets discarded by this IP filter." ::= { mpIp 6 } -- @008 add from -- IP Static Route table mpIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of static route." ::= { mpIp 7 } mpIpStaticRouteEntry OBJECT-TYPE SYNTAX MpIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry of static route." INDEX { mpIpStaticRouteDest, mpIpStaticRouteMask, mpIpStaticRouteNextHop } ::= { mpIpStaticRouteTable 1 } MpIpStaticRouteEntry ::= SEQUENCE { mpIpStaticRouteDest IpAddress, mpIpStaticRouteMask IpAddress, mpIpStaticRouteNextHop IpAddress, mpIpStaticRouteIfIndex INTEGER, mpIpStaticRouteType INTEGER, mpIpStaticRoutePriority INTEGER, mpIpStaticRouteTag INTEGER, mpIpStaticRouteStatus INTEGER } mpIpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies destination IP Address of static route." ::= { mpIpStaticRouteEntry 1 } mpIpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies network mask of static route." ::= { mpIpStaticRouteEntry 2 } mpIpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies next-hop IP Address of static route. The value 0 is specified when route type is 'other','reject' or' local'." ::= { mpIpStaticRouteEntry 3 } mpIpStaticRouteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the outgoing ifIndex." ::= { mpIpStaticRouteEntry 4 } mpIpStaticRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), reject(2), local(3), remote(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the route type. The route type other(1) is not reflected to IP routing table. The route type reject(2) is used to discard corresponding IP packet." ::= { mpIpStaticRouteEntry 5 } mpIpStaticRoutePriority OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies route priority. The entry which route priority is the smallest in usable next-hop is reflected to IP routing table when route priority is different in every next-hop at the case of multi-path." ::= { mpIpStaticRouteEntry 6 } mpIpStaticRouteTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies route tag. In case route type is 'reject', setting to this object is prohibited." ::= { mpIpStaticRouteEntry 7 } mpIpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies status of this entry. When entry is deleted, invalid(2) is set." ::= { mpIpStaticRouteEntry 8 } -- IP Route Priority table mpIpRoutePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpRoutePriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The route priority table of the routing protocol unit. The value of this table is the default value of each routing protocol of this system. It is used for tie-break when the requirement of the addition of routing table for the same network from plural routing protocols occur and route priority is the same." ::= { mpIp 8 } mpIpRoutePriorityEntry OBJECT-TYPE SYNTAX MpIpRoutePriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A route priority entry of the routing protocol." INDEX { mpIpRoutePriorityProtocol } ::= { mpIpRoutePriorityTable 1 } MpIpRoutePriorityEntry ::= SEQUENCE { mpIpRoutePriorityProtocol INTEGER, mpIpRoutePriorityValue INTEGER } mpIpRoutePriorityProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), static(3), ospfIntraArea(4), ospfInterArea(5), ospfExternal(6), rip(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the protocol of IP routing table." ::= { mpIpRoutePriorityEntry 1 } mpIpRoutePriorityValue OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies route priority value." ::= { mpIpRoutePriorityEntry 2 } -- IP Import List table mpIpImportListTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table which is used to distribute route information to different routing protocol. It defines condition of routing table to be distributed and value to be used at distributing." ::= { mpIp 9 } mpIpImportListEntry OBJECT-TYPE SYNTAX MpIpImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry which is used to distribute route information to different routing protocol." INDEX { mpIpImportListNumber } ::= { mpIpImportListTable 1 } MpIpImportListEntry ::= SEQUENCE { mpIpImportListNumber INTEGER, mpIpImportListAction INTEGER, mpIpImportListConIfIndex INTEGER, mpIpImportListConNetAddr IpAddress, mpIpImportListConNetMask IpAddress, mpIpImportListConNetStatus INTEGER, mpIpImportListConRangeStatus INTEGER, mpIpImportListConNextHop IpAddress, mpIpImportListConSource IpAddress, mpIpImportListConSourceStatus INTEGER, mpIpImportListConMetric INTEGER, mpIpImportListConRouteType INTEGER, mpIpImportListConTag INTEGER, mpIpImportListConTagStatus INTEGER, mpIpImportListConPId INTEGER, mpIpImportListSetNetAddr IpAddress, mpIpImportListSetNetMask IpAddress, mpIpImportListSetNetStatus INTEGER, mpIpImportListSetMetric INTEGER, mpIpImportListSetNextHop IpAddress, mpIpImportListSetTag INTEGER, mpIpImportListSetRouteType INTEGER, mpIpImportListTableStatus INTEGER } mpIpImportListNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies import-list number." ::= { mpIpImportListEntry 1 } mpIpImportListAction OBJECT-TYPE SYNTAX INTEGER { import(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether routing table corresponding to the condition is distributed or ignored." ::= { mpIpImportListEntry 2 } mpIpImportListConIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a condition by the outgoing interface. The value 0 means it is outside of the condition decision." ::= { mpIpImportListEntry 3 } mpIpImportListConNetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the network address. It is shared with the network condition and the range condition. " ::= { mpIpImportListEntry 4 } mpIpImportListConNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the network mask. It is shared with the network condition and the range condition." ::= { mpIpImportListEntry 5 } mpIpImportListConNetStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of condition about network address." ::= { mpIpImportListEntry 6 } mpIpImportListConRangeStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of condition about network address range." ::= { mpIpImportListEntry 7 } mpIpImportListConNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the condition about next-hop. The value 0 means it is outside of the condition decision." ::= { mpIpImportListEntry 8 } mpIpImportListConSource OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies IP address or router ID of advertising router." ::= { mpIpImportListEntry 9 } mpIpImportListConSourceStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of condition about advertising router." ::= { mpIpImportListEntry 10 } mpIpImportListConMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the condition about metric. The value 0 means it is outside of the condition decision." ::= { mpIpImportListEntry 11 } mpIpImportListConRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), internal(2), intraArea(3), interArea(4), external(5), type1External(6), type2External(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the condition about route type. The value 0 means it is outside of the condition decision." ::= { mpIpImportListEntry 12 } mpIpImportListConTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies route tag." ::= { mpIpImportListEntry 13 } mpIpImportListConTagStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of condition about route tag." ::= { mpIpImportListEntry 14 } mpIpImportListConPId OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the condition about protocol ID. The value 0 means it is outside of the condition decision." ::= { mpIpImportListEntry 15 } mpIpImportListSetNetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the network address which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 16 } mpIpImportListSetNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the mask address which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 17 } mpIpImportListSetNetStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of network address which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 18 } mpIpImportListSetMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the metric value which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 19 } mpIpImportListSetNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the next-hop IP address which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 20 } mpIpImportListSetTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the route tag which is applied when routing table corresponding to the condition is distributed." ::= { mpIpImportListEntry 21 } mpIpImportListSetRouteType OBJECT-TYPE SYNTAX INTEGER { type1External(1), type2External(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the external route type which is applied when routing table corresponding to the condition is distributed to OSPF." ::= { mpIpImportListEntry 22 } mpIpImportListTableStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies status of this entry. When entry is deleted, invalid(2) is set." ::= { mpIpImportListEntry 23 } -- @008 add end -- @015 add from -- the VPN table mpIpVpnTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's ifIndex." ::= { mpIp 10 } mpIpVpnEntry OBJECT-TYPE SYNTAX MpIpVpnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's ifIndex." INDEX { mpIpVpnIfIndex } ::= { mpIpVpnTable 1 } MpIpVpnEntry ::= SEQUENCE { mpIpVpnIfIndex INTEGER, mpIpVpnId INTEGER } mpIpVpnIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { mpIpVpnEntry 1 } mpIpVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the index to identify VPN the entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnEntry 2 } -- the VPN IP group table mpIpVpnIpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of IP group information relevant to this entity's VPNID." ::= { mpIp 11 } mpIpVpnIpGroupEntry OBJECT-TYPE SYNTAX MpIpVpnIpGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP group information for one of this entity's VPNID." INDEX { mpIpVpnIpGroupVpnId } ::= { mpIpVpnIpGroupTable 1 } MpIpVpnIpGroupEntry ::= SEQUENCE { mpIpVpnIpGroupVpnId INTEGER, mpIpVpnIpForwarding INTEGER, mpIpVpnIpDefaultTTL INTEGER, mpIpVpnIpInReceives Counter, mpIpVpnIpInHdrErrors Counter, mpIpVpnIpInAddrErrors Counter, mpIpVpnIpForwDatagrams Counter, mpIpVpnIpInUnknownProtos Counter, mpIpVpnIpInDiscards Counter, mpIpVpnIpInDelivers Counter, mpIpVpnIpOutRequests Counter, mpIpVpnIpOutDiscards Counter, mpIpVpnIpOutNoRoutes Counter, mpIpVpnIpReasmTimeout Counter, mpIpVpnIpReasmReqds Counter, mpIpVpnIpReasmOKs Counter, mpIpVpnIpReasmFails Counter, mpIpVpnIpFragOKs Counter, mpIpVpnIpFragFails Counter, mpIpVpnIpFragCreates Counter, mpIpVpnIpRoutingDiscards Counter, mpIpVpnIpInFilterDiscards Counter, mpIpVpnIpOutFilterDiscards Counter, mpIpVpnIpGroupStatus INTEGER } mpIpVpnIpGroupVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpGroupEntry 1 } mpIpVpnIpForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), -- acting as a gateway not-forwarding(2) -- NOT acting as a gateway } ACCESS read-write STATUS mandatory DESCRIPTION "The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value." ::= { mpIpVpnIpGroupEntry 2 } mpIpVpnIpDefaultTTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol." ::= { mpIpVpnIpGroupEntry 3 } mpIpVpnIpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { mpIpVpnIpGroupEntry 4 } mpIpVpnIpInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { mpIpVpnIpGroupEntry 5 } mpIpVpnIpInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { mpIpVpnIpGroupEntry 6 } mpIpVpnIpForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { mpIpVpnIpGroupEntry 7 } mpIpVpnIpInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { mpIpVpnIpGroupEntry 8 } mpIpVpnIpInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { mpIpVpnIpGroupEntry 9 } mpIpVpnIpInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { mpIpVpnIpGroupEntry 10 } mpIpVpnIpOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { mpIpVpnIpGroupEntry 11 } mpIpVpnIpOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { mpIpVpnIpGroupEntry 12 } mpIpVpnIpOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { mpIpVpnIpGroupEntry 13 } mpIpVpnIpReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { mpIpVpnIpGroupEntry 14 } mpIpVpnIpReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { mpIpVpnIpGroupEntry 15 } mpIpVpnIpReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully re- assembled." ::= { mpIpVpnIpGroupEntry 16 } mpIpVpnIpReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { mpIpVpnIpGroupEntry 17 } mpIpVpnIpFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { mpIpVpnIpGroupEntry 18 } mpIpVpnIpFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { mpIpVpnIpGroupEntry 19 } mpIpVpnIpFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { mpIpVpnIpGroupEntry 20 } mpIpVpnIpRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing." ::= { mpIpVpnIpGroupEntry 21 } mpIpVpnIpInFilterDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of total number of the receiving packets discarded by this IP filter." ::= { mpIpVpnIpGroupEntry 22 } mpIpVpnIpOutFilterDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is the counter of total number of the receiving packets discarded by this IP filter." ::= { mpIpVpnIpGroupEntry 23 } mpIpVpnIpGroupStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted." ::= { mpIpVpnIpGroupEntry 24 } -- the VPN IP address table mpIpVpnIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's VPNID & IP addresses." ::= { mpIp 12 } mpIpVpnIpAddrEntry OBJECT-TYPE SYNTAX MpIpVpnIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's VPNID & IP addresses." INDEX { mpIpVpnIpAdEntVpnId, mpIpVpnIpAdEntIfIndex, mpIpVpnIpAdEntAddr, mpIpVpnIpAdEntNetMask } ::= { mpIpVpnIpAddrTable 1 } MpIpVpnIpAddrEntry ::= SEQUENCE { mpIpVpnIpAdEntVpnId INTEGER, mpIpVpnIpAdEntIfIndex INTEGER, mpIpVpnIpAdEntAddr IpAddress, mpIpVpnIpAdEntNetMask IpAddress, mpIpVpnIpAdEntBcastAddr INTEGER, mpIpVpnIpAdEntReasmMaxSize INTEGER, mpIpVpnIpAdEntStatus INTEGER, mpIpVpnIpAdEntEncapType INTEGER, mpIpVpnIpAdEntForwarding INTEGER, mpIpVpnIpAdEntArpTimeOut INTEGER, mpIpVpnIpAdEntIcmpRedirectStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachNetInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachNetOutStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachHostInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachHostOutStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachProtInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachProtOutStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachPortInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachPortOutStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachFragNeededInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachRouteFailInStatus INTEGER, mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatus INTEGER, mpIpVpnIpAdEntIcmpTtlExceedInStatus INTEGER, mpIpVpnIpAdEntIcmpTtlExceedOutStatus INTEGER, mpIpVpnIpAdEntIcmpReassemblyExceedInStatus INTEGER, mpIpVpnIpAdEntIcmpReassemblyExceedOutStatus INTEGER, mpIpVpnIpAdEntIcmpParamProbInStatus INTEGER, mpIpVpnIpAdEntIcmpParamProbOutStatus INTEGER, mpIpVpnIpAdEntProxyArpStatus INTEGER, mpIpVpnIpAdEntDirectedBroadcastStatus INTEGER, mpIpVpnIpAdEntPathThroughListNumber INTEGER, mpIpVpnIpAdEntExtendedStaticRouteListNumber INTEGER } mpIpVpnIpAdEntVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpAddrEntry 1 } mpIpVpnIpAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { mpIpVpnIpAddrEntry 2 } mpIpVpnIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address to which this entry's addressing information pertains. This IP address must always be a unicast IP address and it should never be a Class D or E IP address." ::= { mpIpVpnIpAddrEntry 3 } mpIpVpnIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of this object is an IP address with the network part bits set to all 1's and all the hosts part bits set to all 0's." ::= { mpIpVpnIpAddrEntry 4 } mpIpVpnIpAdEntBcastAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the broadcast IP address for this entry. The broadcast IP address is the the IP address with the host part bits set to all 1's or all 0's." ::= { mpIpVpnIpAddrEntry 5 } mpIpVpnIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { mpIpVpnIpAddrEntry 6 } mpIpVpnIpAdEntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted." ::= { mpIpVpnIpAddrEntry 7 } mpIpVpnIpAdEntEncapType OBJECT-TYPE SYNTAX INTEGER { none(1), dix(2), snap(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object refers to the encapsulation type for the interface of this entry. For VLAN interfaces the encapsulation type can only be set to dix(2) or snap(3). For LIS interfaces the encapsulation type can only be set to none(1)." ::= { mpIpVpnIpAddrEntry 8 } mpIpVpnIpAdEntForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), not-forwarding(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates operation for data gram. to forwarding(1). When this interface is IP host, this object is set to not-forwarding(2)." ::= { mpIpVpnIpAddrEntry 9 } mpIpVpnIpAdEntArpTimeOut OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Effective time of the Dynamic VPN IP ARP table (mpIpVpnIpNetToMediaTable). The value 0 means infinity." ::= { mpIpVpnIpAddrEntry 10 } mpIpVpnIpAdEntIcmpRedirectStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP redirect message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 11 } mpIpVpnIpAdEntIcmpUnreachNetInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(network unreachable in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 12 } mpIpVpnIpAdEntIcmpUnreachNetOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(network unreachable out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 13 } mpIpVpnIpAdEntIcmpUnreachHostInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(host unreachable in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 14 } mpIpVpnIpAdEntIcmpUnreachHostOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(host unreachable out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 15 } mpIpVpnIpAdEntIcmpUnreachProtInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(protocol unreachable in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 16 } mpIpVpnIpAdEntIcmpUnreachProtOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(protocol unreachable out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 17 } mpIpVpnIpAdEntIcmpUnreachPortInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(port unreachable in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 18 } mpIpVpnIpAdEntIcmpUnreachPortOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(port unreachable out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 19 } mpIpVpnIpAdEntIcmpUnreachFragNeededInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 20 } mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 21 } mpIpVpnIpAdEntIcmpUnreachRouteFailInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(source route failed in)message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 22 } mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP destination unreachable(source route failed out)message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 23 } mpIpVpnIpAdEntIcmpTtlExceedInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP time exceeded(time to live exceeded in transit in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 24 } mpIpVpnIpAdEntIcmpTtlExceedOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP time exceeded(time to live exceeded in transit out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 25 } mpIpVpnIpAdEntIcmpReassemblyExceedInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 26 } mpIpVpnIpAdEntIcmpReassemblyExceedOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 27 } mpIpVpnIpAdEntIcmpParamProbInStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP parameter problem(in) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 28 } mpIpVpnIpAdEntIcmpParamProbOutStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether an ICMP parameter problem(out) message is transmitted to this Interface." ::= { mpIpVpnIpAddrEntry 29 } mpIpVpnIpAdEntProxyArpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the operating status of the Proxy ARP in this Interface.This object is set to '1' to enable the Proxy ARP functionality, and is set to '2' to disable the Proxy ARP functionality." ::= { mpIpVpnIpAddrEntry 30 } mpIpVpnIpAdEntDirectedBroadcastStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the operating status of the Directed Broadcast Forwarding in this Interface. This object is set to '1' to enable the Directed Broadcast Forwarding functionality, and is set to '2' to disable the Directed Broadcast Forwarding functionality." ::= { mpIpVpnIpAddrEntry 31 } mpIpVpnIpAdEntPathThroughListNumber OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the operating status of the Path Through Forwarding in this Interface. This object is set to 'except 0' to enable the Path Through Forwarding functionality, and is set to '0' to disable the Path Through Forwarding functionality.But, this number must be in relation to the direction-list." ::= { mpIpVpnIpAddrEntry 32 } mpIpVpnIpAdEntExtendedStaticRouteListNumber OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the operating status of the Extended Static Routing in this Interface. This object is set to 'except 0' to enable the Extended Static Routing functionality, and is set to '0' to disable the Extended Static Routing functionality.But, this number must be in relation to the direction-list." ::= { mpIpVpnIpAddrEntry 33 } -- the VPN IP cidr table mpIpVpnIpCidrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpCidrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of IP cidr information relevant to this entity's VPNID." ::= { mpIp 13 } mpIpVpnIpCidrEntry OBJECT-TYPE SYNTAX MpIpVpnIpCidrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP cidr information for one of this entity's VPNID." INDEX { mpIpVpnIpCidrVpnId } ::= { mpIpVpnIpCidrTable 1 } MpIpVpnIpCidrEntry ::= SEQUENCE { mpIpVpnIpCidrVpnId INTEGER, mpIpVpnIpCidrRouteNumber Gauge32 } mpIpVpnIpCidrVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpCidrEntry 1 } mpIpVpnIpCidrRouteNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The number of current mpIpVpnIpCidrRouteTable entries that are not invalid." ::= { mpIpVpnIpCidrEntry 2 } -- the VPN IP cidr route table -- The IP CIDR Route Table obsoletes and replaces the ipRoute -- Table current in MIB-I and MIB-II and the IP Forwarding Table. -- It adds knowledge of the autonomous system of the next hop, -- multiple next hops, and policy routing, and Classless -- Inter-Domain Routing. mpIpVpnIpCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpCidrRouteEntry MAX-ACCESS not-accessible -- @015 STATUS current STATUS mandatory DESCRIPTION "This entity's IP Routing table." REFERENCE "RFC 1213 Section 6.6, The IP Group" ::= { mpIp 14 } mpIpVpnIpCidrRouteEntry OBJECT-TYPE SYNTAX MpIpVpnIpCidrRouteEntry MAX-ACCESS not-accessible -- @015 STATUS current STATUS mandatory DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { mpIpVpnIpCidrRouteVpnId, mpIpVpnIpCidrRouteDest, mpIpVpnIpCidrRouteMask, mpIpVpnIpCidrRouteTos, mpIpVpnIpCidrRouteNextHop } ::= { mpIpVpnIpCidrRouteTable 1 } MpIpVpnIpCidrRouteEntry ::= SEQUENCE { mpIpVpnIpCidrRouteVpnId INTEGER, mpIpVpnIpCidrRouteDest IpAddress, mpIpVpnIpCidrRouteMask IpAddress, mpIpVpnIpCidrRouteTos Integer32, mpIpVpnIpCidrRouteNextHop IpAddress, mpIpVpnIpCidrRouteIfIndex Integer32, mpIpVpnIpCidrRouteType INTEGER, mpIpVpnIpCidrRouteProto INTEGER, mpIpVpnIpCidrRouteAge Integer32, mpIpVpnIpCidrRouteInfo OBJECT IDENTIFIER, mpIpVpnIpCidrRouteNextHopAS Integer32, mpIpVpnIpCidrRouteMetric1 Integer32, mpIpVpnIpCidrRouteMetric2 Integer32, mpIpVpnIpCidrRouteMetric3 Integer32, mpIpVpnIpCidrRouteMetric4 Integer32, mpIpVpnIpCidrRouteMetric5 Integer32, mpIpVpnIpCidrRouteStatus RowStatus } mpIpVpnIpCidrRouteVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpCidrRouteEntry 1 } mpIpVpnIpCidrRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteMask object is not equal to x." ::= { mpIpVpnIpCidrRouteEntry 2 } mpIpVpnIpCidrRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpCidrRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteDest object is not equal to mpIpVpnIpCidrRouteDest." ::= { mpIpVpnIpCidrRouteEntry 3 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. mpIpVpnIpCidrRouteTos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30" ::= { mpIpVpnIpCidrRouteEntry 4 } mpIpVpnIpCidrRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { mpIpVpnIpCidrRouteEntry 5 } mpIpVpnIpCidrRouteIfIndex OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." DEFVAL { 0 } ::= { mpIpVpnIpCidrRouteEntry 6 } mpIpVpnIpCidrRouteType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB reject (2), -- route which discards traffic local (3), -- local interface remote (4) -- remote destination } -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes." ::= { mpIpVpnIpCidrRouteEntry 7 } mpIpVpnIpCidrRouteProto OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect -- the following are all dynamic -- routing protocols egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II isIs (9), -- Dual IS-IS esIs (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15), -- InterDomain Policy Routing ciscoEigrp (16) -- Cisco EIGRP } MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols." ::= { mpIpVpnIpCidrRouteEntry 8 } mpIpVpnIpCidrRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." DEFVAL { 0 } ::= { mpIpVpnIpCidrRouteEntry 9 } mpIpVpnIpCidrRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mpIpVpnIpCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { mpIpVpnIpCidrRouteEntry 10 } mpIpVpnIpCidrRouteNextHopAS OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero." DEFVAL { 0 } ::= { mpIpVpnIpCidrRouteEntry 11 } mpIpVpnIpCidrRouteMetric1 OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { mpIpVpnIpCidrRouteEntry 12 } mpIpVpnIpCidrRouteMetric2 OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { mpIpVpnIpCidrRouteEntry 13 } mpIpVpnIpCidrRouteMetric3 OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { mpIpVpnIpCidrRouteEntry 14 } mpIpVpnIpCidrRouteMetric4 OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { mpIpVpnIpCidrRouteEntry 15 } mpIpVpnIpCidrRouteMetric5 OBJECT-TYPE SYNTAX Integer32 -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { mpIpVpnIpCidrRouteEntry 16 } mpIpVpnIpCidrRouteStatus OBJECT-TYPE SYNTAX RowStatus -- @015 MAX-ACCESS read-create MAX-ACCESS read-only -- @015 STATUS current STATUS mandatory DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { mpIpVpnIpCidrRouteEntry 17 } -- conformance information -- the VPN IP routing table -- The IP routing table contains an entry for each route -- presently known to this entity. mpIpVpnIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's IP Routing table." ::= { mpIp 15 } mpIpVpnIpRouteEntry OBJECT-TYPE SYNTAX MpIpVpnIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A route to a particular destination." INDEX { mpIpVpnIpRouteVpnId, mpIpVpnIpRouteDest } ::= { mpIpVpnIpRouteTable 1 } MpIpVpnIpRouteEntry ::= SEQUENCE { mpIpVpnIpRouteVpnId INTEGER, mpIpVpnIpRouteDest IpAddress, mpIpVpnIpRouteIfIndex INTEGER, mpIpVpnIpRouteMetric1 INTEGER, mpIpVpnIpRouteMetric2 INTEGER, mpIpVpnIpRouteMetric3 INTEGER, mpIpVpnIpRouteMetric4 INTEGER, mpIpVpnIpRouteNextHop IpAddress, mpIpVpnIpRouteType INTEGER, mpIpVpnIpRouteProto INTEGER, mpIpVpnIpRouteAge INTEGER, mpIpVpnIpRouteMask IpAddress, mpIpVpnIpRouteMetric5 INTEGER, mpIpVpnIpRouteInfo OBJECT IDENTIFIER } mpIpVpnIpRouteVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpRouteEntry 1 } mpIpVpnIpRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { mpIpVpnIpRouteEntry 2 } mpIpVpnIpRouteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { mpIpVpnIpRouteEntry 3 } mpIpVpnIpRouteMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { mpIpVpnIpRouteEntry 4 } mpIpVpnIpRouteMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { mpIpVpnIpRouteEntry 5 } mpIpVpnIpRouteMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { mpIpVpnIpRouteEntry 6 } mpIpVpnIpRouteMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { mpIpVpnIpRouteEntry 7 } mpIpVpnIpRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)" ::= { mpIpVpnIpRouteEntry 8 } mpIpVpnIpRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated route -- route to directly direct(3), -- connected (sub-)network -- route to a non-local indirect(4) -- host/network/sub-network } ACCESS read-write STATUS mandatory DESCRIPTION "The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpRouteType object." ::= { mpIpVpnIpRouteEntry 9 } mpIpVpnIpRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- non-protocol information, -- e.g., manually configured local(2), -- entries -- set via a network netmgmt(3), -- management protocol -- obtained via ICMP, icmp(4), -- e.g., Redirect -- the remaining values are -- all gateway routing -- protocols egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { mpIpVpnIpRouteEntry 10 } mpIpVpnIpRouteAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { mpIpVpnIpRouteEntry 11 } mpIpVpnIpRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpRouteMask by determining whether the value of the correspondent mpIpVpnIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the mpIpVpnIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { mpIpVpnIpRouteEntry 12 } mpIpVpnIpRouteMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { mpIpVpnIpRouteEntry 13 } mpIpVpnIpRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's mpIpVpnIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { mpIpVpnIpRouteEntry 14 } -- the VPN IP address translation table -- The IP address translation table contain the IpAddress to -- `physical' address equivalences. Some interfaces do not -- use translation tables for determining address -- equivalences (e.g., DDN-X.25 has an algorithmic method); -- if all interfaces are of this type, then the Address -- Translation table is empty, i.e., has zero entries. mpIpVpnIpNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP Address Translation table used for mapping from IP addresses to physical addresses." ::= { mpIp 16 } mpIpVpnIpNetToMediaEntry OBJECT-TYPE SYNTAX MpIpVpnIpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one IpAddress to `physical' address equivalence." INDEX { mpIpVpnIpNetToMediaVpnId, mpIpVpnIpNetToMediaIfIndex, mpIpVpnIpNetToMediaNetAddress } ::= { mpIpVpnIpNetToMediaTable 1 } MpIpVpnIpNetToMediaEntry ::= SEQUENCE { mpIpVpnIpNetToMediaVpnId INTEGER, mpIpVpnIpNetToMediaIfIndex INTEGER, mpIpVpnIpNetToMediaPhysAddress PhysAddress, mpIpVpnIpNetToMediaNetAddress IpAddress, mpIpVpnIpNetToMediaType INTEGER } mpIpVpnIpNetToMediaVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIpNetToMediaEntry 1 } mpIpVpnIpNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { mpIpVpnIpNetToMediaEntry 2 } mpIpVpnIpNetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { mpIpVpnIpNetToMediaEntry 3 } mpIpVpnIpNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media- dependent `physical' address." ::= { mpIpVpnIpNetToMediaEntry 4 } mpIpVpnIpNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpNetToMediaType object." ::= { mpIpVpnIpNetToMediaEntry 5 } -- the VPN static proxy ARP table mpIpVpnStaticProxyArpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnStaticProxyArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's Static Proxy ARP table." ::= { mpIp 17 } mpIpVpnStaticProxyArpEntry OBJECT-TYPE SYNTAX MpIpVpnStaticProxyArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's Static Proxy ARP table." INDEX { mpIpVpnStaticProxyArpVpnId, mpIpVpnStaticProxyArpIfIndex, mpIpVpnStaticProxyArpNetAddress, mpIpVpnStaticProxyArpNetMask } ::= { mpIpVpnStaticProxyArpTable 1 } MpIpVpnStaticProxyArpEntry ::= SEQUENCE { mpIpVpnStaticProxyArpVpnId INTEGER, mpIpVpnStaticProxyArpIfIndex INTEGER, mpIpVpnStaticProxyArpNetAddress IpAddress, mpIpVpnStaticProxyArpNetMask IpAddress, mpIpVpnStaticProxyArpStatus INTEGER } mpIpVpnStaticProxyArpVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnStaticProxyArpEntry 1 } mpIpVpnStaticProxyArpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { mpIpVpnStaticProxyArpEntry 2 } mpIpVpnStaticProxyArpNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media- dependent `physical' address." ::= { mpIpVpnStaticProxyArpEntry 3 } mpIpVpnStaticProxyArpNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media- dependent `physical' address." ::= { mpIpVpnStaticProxyArpEntry 4 } mpIpVpnStaticProxyArpStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted." ::= { mpIpVpnStaticProxyArpEntry 5 } -- the VPN ICMP table -- Implementation of the ICMP group is mandatory for all -- systems. mpIpVpnIcmpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnIcmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of ICMP group information relevant to this entity's VPNID." ::= { mpIp 18 } mpIpVpnIcmpEntry OBJECT-TYPE SYNTAX MpIpVpnIcmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ICMP group information for one of this entity's VPNID." INDEX { mpIpVpnIcmpVpnId } ::= { mpIpVpnIcmpTable 1 } MpIpVpnIcmpEntry ::= SEQUENCE { mpIpVpnIcmpVpnId INTEGER, mpIpVpnIcmpInMsgs Counter, mpIpVpnIcmpInErrors Counter, mpIpVpnIcmpInDestUnreachs Counter, mpIpVpnIcmpInTimeExcds Counter, mpIpVpnIcmpInParmProbs Counter, mpIpVpnIcmpInSrcQuenchs Counter, mpIpVpnIcmpInRedirects Counter, mpIpVpnIcmpInEchos Counter, mpIpVpnIcmpInEchoReps Counter, mpIpVpnIcmpInTimestamps Counter, mpIpVpnIcmpInTimestampReps Counter, mpIpVpnIcmpInAddrMasks Counter, mpIpVpnIcmpInAddrMaskReps Counter, mpIpVpnIcmpOutMsgs Counter, mpIpVpnIcmpOutErrors Counter, mpIpVpnIcmpOutDestUnreachs Counter, mpIpVpnIcmpOutTimeExcds Counter, mpIpVpnIcmpOutParmProbs Counter, mpIpVpnIcmpOutSrcQuenchs Counter, mpIpVpnIcmpOutRedirects Counter, mpIpVpnIcmpOutEchos Counter, mpIpVpnIcmpOutEchoReps Counter, mpIpVpnIcmpOutTimestamps Counter, mpIpVpnIcmpOutTimestampReps Counter, mpIpVpnIcmpOutAddrMasks Counter, mpIpVpnIcmpOutAddrMaskReps Counter } mpIpVpnIcmpVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535." ::= { mpIpVpnIcmpEntry 1 } mpIpVpnIcmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which the entity received. Note that this counter includes all those counted by mpIpVpnIcmpInErrors." ::= { mpIpVpnIcmpEntry 2 } mpIpVpnIcmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { mpIpVpnIcmpEntry 3 } mpIpVpnIcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { mpIpVpnIcmpEntry 4 } mpIpVpnIcmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { mpIpVpnIcmpEntry 5 } mpIpVpnIcmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { mpIpVpnIcmpEntry 6 } mpIpVpnIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages received." ::= { mpIpVpnIcmpEntry 7 } mpIpVpnIcmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages received." ::= { mpIpVpnIcmpEntry 8 } mpIpVpnIcmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { mpIpVpnIcmpEntry 9 } mpIpVpnIcmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { mpIpVpnIcmpEntry 10 } mpIpVpnIcmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { mpIpVpnIcmpEntry 11 } mpIpVpnIcmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { mpIpVpnIcmpEntry 12 } mpIpVpnIcmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { mpIpVpnIcmpEntry 13 } mpIpVpnIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { mpIpVpnIcmpEntry 14 } mpIpVpnIcmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by mpIpVpnIcmpOutErrors." ::= { mpIpVpnIcmpEntry 15 } mpIpVpnIcmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { mpIpVpnIcmpEntry 16 } mpIpVpnIcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { mpIpVpnIcmpEntry 17 } mpIpVpnIcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { mpIpVpnIcmpEntry 18 } mpIpVpnIcmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { mpIpVpnIcmpEntry 19 } mpIpVpnIcmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { mpIpVpnIcmpEntry 20 } mpIpVpnIcmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { mpIpVpnIcmpEntry 21 } mpIpVpnIcmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { mpIpVpnIcmpEntry 22 } mpIpVpnIcmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { mpIpVpnIcmpEntry 23 } mpIpVpnIcmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { mpIpVpnIcmpEntry 24 } mpIpVpnIcmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { mpIpVpnIcmpEntry 25 } mpIpVpnIcmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { mpIpVpnIcmpEntry 26 } mpIpVpnIcmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { mpIpVpnIcmpEntry 27 } -- @015 add end -- @018 add from -- the VPN Ping table mpIpVpnPingTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpVpnPingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of ping management information relevant to this entity's ICMP echo identifier." ::= { mpIp 19 } mpIpVpnPingEntry OBJECT-TYPE SYNTAX MpIpVpnPingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ping management information for one of this entity's ICMP echo identifier." INDEX { mpIpVpnPingId } ::= { mpIpVpnPingTable 1 } MpIpVpnPingEntry ::= SEQUENCE { mpIpVpnPingId INTEGER, mpIpVpnPingVpnId INTEGER, mpIpVpnPingTarget IpAddress, mpIpVpnPingRequestSend INTEGER, mpIpVpnPingDataLength INTEGER, mpIpVpnPingSendTos INTEGER, mpIpVpnPingSendTtl INTEGER, mpIpVpnPingSendTimeOut INTEGER, mpIpVpnPingSendInterface INTEGER, mpIpVpnPingStatus INTEGER, mpIpVpnPingResult INTEGER, mpIpVpnPingErrorSourceAddress IpAddress } mpIpVpnPingId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the ping entry. The value of this index must be assigned uniquely, within the range of 1 - 65535." ::= { mpIpVpnPingEntry 1 } mpIpVpnPingVpnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the VPNID for this entry, within the range of 1 - 65535." ::= { mpIpVpnPingEntry 2 } mpIpVpnPingTarget OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the destination IP address for this entry. This IP address must always be a unicast IP address and it should never be a Class D or E IP address." ::= { mpIpVpnPingEntry 3 } mpIpVpnPingRequestSend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the ping request number of the times." ::= { mpIpVpnPingEntry 4 } mpIpVpnPingDataLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the ping data length, within the range of 0 - 65507." ::= { mpIpVpnPingEntry 5 } mpIpVpnPingSendTos OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the TOS value in ping packet, within the range of 0 - 0xfe." ::= { mpIpVpnPingEntry 6 } mpIpVpnPingSendTtl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the TTL value in ping packet, within the range of 1 - 255." ::= { mpIpVpnPingEntry 7 } mpIpVpnPingSendTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the ping time out value, within the range of 1 - 60 seconds." ::= { mpIpVpnPingEntry 8 } mpIpVpnPingSendInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is ifIndex. IP address assigned ifIndex is set as source IP address in ping packets." ::= { mpIpVpnPingEntry 9 } mpIpVpnPingStatus OBJECT-TYPE SYNTAX INTEGER { create(1), inProgress(2), complete(3), destroy(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object refers to the ping entry status. When this object is set to create(1), ping entry is created. Set to inProgress(2), ping is Started. When a reply or icmp error receiveed and time out occured, the status become complete(3). This object can not set to complete(3). Set to destroy(4), entry is deleted." ::= { mpIpVpnPingEntry 10 } mpIpVpnPingResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object refers to the ping result status." ::= { mpIpVpnPingEntry 11 } mpIpVpnPingErrorSourceAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This value of this object is the error source IP address in icmp error reply message." ::= { mpIpVpnPingEntry 12 } -- @018 add end -- *************************************************************************** -- the MM_Node9110/9120 RIP Group -- *************************************************************************** mpRip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpRip2IfConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table type object of the RIP sending operation mode." ::= { mpRip 1 } mpRip2IfConfEntry OBJECT-TYPE SYNTAX MpRip2IfConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table entry of mpRip2IfconfTable." INDEX { mpRip2IfConfAddress } ::= { mpRip2IfConfTable 1 } MpRip2IfConfEntry ::= SEQUENCE { mpRip2IfConfAddress IpAddress, mpRip2IfConfPoisoned INTEGER, -- @008 add from mpRip2IfConfAddress IpAddress, mpRip2IfConfPoisoned INTEGER, mpRip2IfConfSplitHorizon INTEGER, mpRip2IfConfHostAdvertise INTEGER, mpRip2IfConfInOffset INTEGER, mpRip2IfConfOutOffset INTEGER, mpRip2IfConfDefType INTEGER, mpRip2IfConfDefMetric INTEGER, mpRip2IfConfDefAddress IpAddress, mpRip2IfConfDefTag INTEGER, mpRip2IfConfDefProtocol INTEGER, mpRip2IfConfDefImportList INTEGER, mpRip2IfConfRoutePriority INTEGER -- @008 add end } mpRip2IfConfAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the IP address of the interface to which the RIP packet is sent." ::= { mpRip2IfConfEntry 1 } mpRip2IfConfPoisoned OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the RIP sending mode of this interface. In case of Sprit Horizon with Poisoned Reverse, the value '1' is set to this object. In case of Sprit Horizon, the value '2' is set to this object." ::= { mpRip2IfConfEntry 2 } -- @008 add from mpRip2IfConfSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The flag about Split-Horizon of this interface." ::= { mpRip2IfConfEntry 3 } mpRip2IfConfHostAdvertise OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The flag which shows whether IP address of interface that condition is Down is transmitted as Host Route to this Interface." ::= { mpRip2IfConfEntry 4 } mpRip2IfConfInOffset OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the metric value to be added to the route information of RIP-response which is received from this interface." ::= { mpRip2IfConfEntry 5 } mpRip2IfConfOutOffset OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the metric value to be added to the route information of RIP-response which is sent to this interface." ::= { mpRip2IfConfEntry 6 } mpRip2IfConfDefType OBJECT-TYPE SYNTAX INTEGER { no(1), distribute(2), always(3), importList(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The timing when default route is advertised to this interface." ::= { mpRip2IfConfEntry 7 } mpRip2IfConfDefMetric OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "The metric value of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'." ::= { mpRip2IfConfEntry 8 } mpRip2IfConfDefAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The next-hop IP addess of default route to be used when the advertised timing (mpRip2IfConfDefType) is set to 'always'." ::= { mpRip2IfConfEntry 9 } mpRip2IfConfDefTag OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'." ::= { mpRip2IfConfEntry 10 } mpRip2IfConfDefProtocol OBJECT-TYPE SYNTAX INTEGER { local(2), static(3), ospf(13) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol of routing table to be used for condition decision when the advertised timing (mpRip2IfConfDefType) is set to 'importList'." ::= { mpRip2IfConfEntry 11 } mpRip2IfConfDefImportList OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'." ::= { mpRip2IfConfEntry 12 } mpRip2IfConfRoutePriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority value which is used when the route information of RIP-response received from this interface is reflected. The value 0 means route priority is not used for each interface." ::= { mpRip2IfConfEntry 13 } mpRip2PeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MpRip2PeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Neighbor information table to transmit RIP-response with unicast." ::= { mpRip 2 } mpRip2PeerEntry OBJECT-TYPE SYNTAX MpRip2PeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Neighbor information Entry to transmit RIP-response with unicast." INDEX { mpRip2PeerAddress } ::= { mpRip2PeerTable 1 } MpRip2PeerEntry ::= SEQUENCE { mpRip2PeerAddress IpAddress, mpRip2PeerVersion INTEGER, mpRip2PeerStatus RowStatus } mpRip2PeerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies IP Address of Neighbor which transmits RIP-response with unicast." ::= { mpRip2PeerEntry 1 } mpRip2PeerVersion OBJECT-TYPE SYNTAX INTEGER { doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies version of RIP-response." ::= { mpRip2PeerEntry 2 } mpRip2PeerStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify this table entry." ::= { mpRip2PeerEntry 3 } mpRip2ImportListTable OBJECT-TYPE SYNTAX SEQUENCE OF MpRip2ImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table for importing route information to other routing protocols or RIP." ::= { mpRip 3 } mpRip2ImportListEntry OBJECT-TYPE SYNTAX MpRip2ImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table for importing route information to other routing protocols or RIP." INDEX { mpRip2ImportListProtocol, mpRip2ImportListNumber } ::= { mpRip2ImportListTable 1 } MpRip2ImportListEntry ::= SEQUENCE { mpRip2ImportListProtocol INTEGER, mpRip2ImportListNumber INTEGER, mpRip2ImportListStatus INTEGER } mpRip2ImportListProtocol OBJECT-TYPE SYNTAX INTEGER { local(2), static(3), ospf(13) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies protocol of IP routing table." ::= { mpRip2ImportListEntry 1 } mpRip2ImportListNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies import list number." ::= { mpRip2ImportListEntry 2 } mpRip2ImportListStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify this table entry." ::= { mpRip2ImportListEntry 3 } mpRip2NetworkPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpRip2NetworkPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table to specify route priority to each network at creating IP routing table." ::= { mpRip 4 } mpRip2NetworkPriorityEntry OBJECT-TYPE SYNTAX MpRip2NetworkPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry to specify route priority to each network at creating IP routing table." INDEX { mpRip2NetworkPriorityAddr, mpRip2NetworkPriorityMask } ::= { mpRip2NetworkPriorityTable 1 } MpRip2NetworkPriorityEntry ::= SEQUENCE { mpRip2NetworkPriorityAddr IpAddress, mpRip2NetworkPriorityMask IpAddress, mpRip2NetworkPriorityValue INTEGER, mpRip2NetworkPriorityStatus RowStatus } mpRip2NetworkPriorityAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies network IP address." ::= { mpRip2NetworkPriorityEntry 1 } mpRip2NetworkPriorityMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies network mask." ::= { mpRip2NetworkPriorityEntry 2 } mpRip2NetworkPriorityValue OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the value of route priority." ::= { mpRip2NetworkPriorityEntry 3 } mpRip2NetworkPriorityStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify this table entry." ::= { mpRip2NetworkPriorityEntry 4 } mpRip2RoutePriority OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority value to be used when the route information of RIP-response received is reflected. It is used when the route priority of interface has not been registered (mpRip2IfConfRoutePriority is 0) and route information doesn't correspond to any network route priority table(mpRip2NetworkPriorityTable)." ::= { mpRip 5 } -- @008 add end -- *************************************************************************** -- Snmp Community and Trap Community name table. -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpSnmpCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSnmpCommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The community table (1-5 entries). This table lists community strings and their access levels. When a Snmp message is received by this entity, the community string in the message is compared with this table to determine access rights of sender." ::= { mpSnmp 1 } mpSnmpCommunityEntry OBJECT-TYPE SYNTAX MpSnmpCommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A community table entry." INDEX { mpSnmpCommunityIndex, mpSnmpCommunityAddr } ::= { mpSnmpCommunityTable 1 } MpSnmpCommunityEntry ::= SEQUENCE { mpSnmpCommunityIndex INTEGER, mpSnmpCommunityStatus INTEGER, mpSnmpCommunityAccess INTEGER, mpSnmpCommunityAddr IpAddress, mpSnmpCommunityName DisplayString } mpSnmpCommunityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the addition/deletion of a particular trap community." ::= { mpSnmpCommunityEntry 1 } mpSnmpCommunityStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry notinuseyet(2),-- after setting it to valid and -- before -- setting the community name invalid(3) -- delete this entry } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the addition/deletion of a particular community. Entries 1 and 2 are reserved for public access( read-only ) and NEC's NMS read -write." ::= { mpSnmpCommunityEntry 2 } mpSnmpCommunityAccess OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "A value of readWrite(2) allows the community to read and write all objects in the MIB. A value of readOnly(1) allows the community to read all objs." ::= { mpSnmpCommunityEntry 3 } mpSnmpCommunityAddr OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "IP address of the registered NMS. This is actually a lists of IP addresses, maximum of 5. A special indexing must be implemented to get all the list of IP addresses for each entry." ::= { mpSnmpCommunityEntry 4 } mpSnmpCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Configurable community string with access rights defined by the value of sysCommunityAccess." ::= { mpSnmpCommunityEntry 5 } mpSnmpTrapCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpSnmpTrapCommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The trap receiver table (0 to 5 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs." ::= { mpSnmp 2 } mpSnmpTrapCommunityEntry OBJECT-TYPE SYNTAX MpSnmpTrapCommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A trap receiver table entry." INDEX { mpSnmpTrapCommunityIndex } ::= { mpSnmpTrapCommunityTable 1 } MpSnmpTrapCommunityEntry ::= SEQUENCE { mpSnmpTrapCommunityIndex INTEGER, mpSnmpTrapCommunityStatus INTEGER, mpSnmpTrapCommunityType INTEGER, mpSnmpTrapCommunityAddr IpAddress, mpSnmpTrapCommunityName DisplayString } mpSnmpTrapCommunityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the row for a particular trap community." ::= { mpSnmpTrapCommunityEntry 1 } mpSnmpTrapCommunityStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry notinuseyet(2),-- after setting it to valid and -- before -- setting the community name invalid(3) -- delete this entry } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the addition/deletion of a particular trap community." ::= { mpSnmpTrapCommunityEntry 2 } mpSnmpTrapCommunityType OBJECT-TYPE SYNTAX INTEGER { networkmanager(1), -- only one supported telephone(2), -- not yet supported faxmachine(3), -- not yet supported pager(4), -- not yet supported emailaddress(5) -- not yet supported } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the recipient of a generated trap. AS of the moment only a NMS station is supported." ::= { mpSnmpTrapCommunityEntry 3 } mpSnmpTrapCommunityAddr OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "For type NMS,IP address for trap receiver. (For now type NMS is yet supported). For telephone,fax, and pager, phone number. For email, this is an Internet email address." ::= { mpSnmpTrapCommunityEntry 4 } mpSnmpTrapCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Community string used for trap messages to this trap receiver." ::= { mpSnmpTrapCommunityEntry 5 } -- ロックMIBグループ @008 mpSnmpLockMib OBJECT IDENTIFIER ::= { mpSnmp 3 } -- ロックMIB IPアドレス @008 mpSnmpLockMibIPaddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "if IPaddress is 0.0.0.0, NMS doesn't SET LockMIB. if not, only 1 NMS is successing to SET LockMIB. note : NMS must SET own IPaddress to LockMIB before NMS tries to SET some specific MIB" -- このMIBの値が 0.0.0.0 であれば、どのNMSも ロックMIBにSETしていないことを示す。 -- 0.0.0.0 以外であれば、既に、ロックMIBをSETしているNMSが存在することを示す。 -- 注．NMS は、特定の排他制御が必要なMIBに対するSET処理を行う前に ロックMIBへの自IPアドレスの -- 設定が成功していることを確認しなければならない。 ::= { mpSnmpLockMib 1 } -- *************************************************************************** -- the SanFran Statistics Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpMonitorGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MpMonitorGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Monitoring Group related details." ::= { mpStats 1 } mpMonitorGroupEntry OBJECT-TYPE SYNTAX MpMonitorGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Details for a group of monitored statistics." INDEX { mpMonGrpObjectInstance, mpMonGrpObjectId } ::= { mpMonitorGroupTable 1 } MpMonitorGroupEntry ::= SEQUENCE { mpMonGrpIndex INTEGER, mpMonGrpObjectId OBJECT IDENTIFIER, mpMonGrpObjectInstance INTEGER, mpMonGrpPollInt INTEGER, mpMonGrpStatus INTEGER, mpMonGrpName DisplayString } mpMonGrpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Specifies the table entry." ::= { mpMonitorGroupEntry 1 } mpMonGrpObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS not-accessible STATUS mandatory DESCRIPTION "Name of the port/module to which the info in the table entry applies to." ::= { mpMonitorGroupEntry 2 } mpMonGrpObjectInstance OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Instance to which the info in the table entry applies to." ::= { mpMonitorGroupEntry 3 } mpMonGrpPollInt OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Interval at which the polling for values is done." ::= { mpMonitorGroupEntry 4 } mpMonGrpStatus OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this field to disable deletes the entry from the list of monitored groups." ::= { mpMonitorGroupEntry 5 } mpMonGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The text value of the monitor group. For release 1, read-only but release 2 will allow the user to set the monitor group name to any textual description." ::= { mpMonitorGroupEntry 6 } mpStatObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF MpStatObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Object related statistics details." ::= { mpStats 2 } mpStatObjectEntry OBJECT-TYPE SYNTAX MpStatObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Details of statistics." INDEX { mpStatObjectGroupId, mpStatObjectId } ::= { mpStatObjectTable 1 } MpStatObjectEntry ::= SEQUENCE { mpStatObjectIndex INTEGER, mpStatObjectGroupId INTEGER, mpStatObjectId OBJECT IDENTIFIER, mpStatObjectName DisplayString, mpStatObjectCurValue INTEGER, mpStatObjectCumRate INTEGER, mpStatObjectIntRate INTEGER } mpStatObjectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Specifies the table entry." ::= { mpStatObjectEntry 1 } mpStatObjectGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Monitoring Group that this obj belongs to." ::= { mpStatObjectEntry 2 } mpStatObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS not-accessible STATUS mandatory DESCRIPTION "OID of the object." ::= { mpStatObjectEntry 3 } mpStatObjectName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..80)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Textual equivalent of the object." ::= { mpStatObjectEntry 4 } mpStatObjectCurValue OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Current value of the object." ::= { mpStatObjectEntry 5 } mpStatObjectCumRate OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Cumulative rate of the object." ::= { mpStatObjectEntry 6 } mpStatObjectIntRate OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Rate of change of the objetc's statistics." ::= { mpStatObjectEntry 7 } -- *************************************************************************** -- the MM_Node9110/9120 CLI Group -- *************************************************************************** -- Implementation of this group is mandatory for all the MM_Node9110/9120 systems. mpCliOperatorTable OBJECT-TYPE SYNTAX SEQUENCE OF MpCliOperatorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of operator mode user for CLI" ::= { mpCli 1 } mpCliOperatorEntry OBJECT-TYPE SYNTAX MpCliOperatorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of operator mode user information." INDEX { mpCliOperatorIndex } ::= { mpCliOperatorTable 1 } MpCliOperatorEntry ::= SEQUENCE { mpCliOperatorIndex INTEGER, mpCliOperatorName DisplayString, mpCliOperatorPasswd DisplayString, mpCliOperatorLoginPasswd DisplayString, mpCliOperatorStatus INTEGER } mpCliOperatorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing operator mode user." ::= { mpCliOperatorEntry 1 } mpCliOperatorName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is the operator user name." ::= { mpCliOperatorEntry 2 } mpCliOperatorPasswd OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is the operator user password which is used for user login." ::= { mpCliOperatorEntry 3 } mpCliOperatorLoginPasswd OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This objects is the operator user password entered by user at login." ::= { mpCliOperatorEntry 4 } mpCliOperatorStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), notinuseyet(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the addition/deletion of a operator." ::= { mpCliOperatorEntry 5 } mpCliSupervisorTable OBJECT-TYPE SYNTAX SEQUENCE OF MpCliSupervisorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of supervisor mode user for CLI" ::= { mpCli 2 } mpCliSupervisorEntry OBJECT-TYPE SYNTAX MpCliSupervisorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of supervisor mode user information." INDEX { mpCliSupervisorIndex } ::= { mpCliSupervisorTable 1 } MpCliSupervisorEntry ::= SEQUENCE { mpCliSupervisorIndex INTEGER, mpCliSupervisorName DisplayString, mpCliSupervisorPasswd DisplayString, mpCliSupervisorLoginPasswd DisplayString, mpCliSupervisorStatus INTEGER } mpCliSupervisorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the existing supervisor mode user" ::= { mpCliSupervisorEntry 1 } mpCliSupervisorName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is the supervisor user name." ::= { mpCliSupervisorEntry 2 } mpCliSupervisorPasswd OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is the supervisor user password which is used for user login." ::= { mpCliSupervisorEntry 3 } mpCliSupervisorLoginPasswd OBJECT-TYPE SYNTAX DisplayString(SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This objects is the supervisor user password entered by user at login." ::= { mpCliSupervisorEntry 4 } mpCliSupervisorStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), notinuseyet(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the addition/deletion of a supervisor." ::= { mpCliSupervisorEntry 5 } -- *************************************************************************** -- the SanFran ATM Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpAtmInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM local interface configuration parameters, one entry per ATM interface port." ::= { mpAtm 1 } mpAtmInterfaceConfEntry OBJECT-TYPE SYNTAX MpAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ATM interface configuration parameters and state variables." INDEX { mpAtmInterfaceIfIndex } ::= { mpAtmInterfaceConfTable 1 } MpAtmInterfaceConfEntry ::= SEQUENCE { mpAtmInterfaceIfIndex INTEGER, mpAtmInterfaceAdminPrefix OCTET STRING, mpAtmInterfaceAdminEsi OCTET STRING, mpAtmInterfaceMaxVpiVciBits INTEGER } mpAtmInterfaceIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmInterfaceConfEntry 1 } mpAtmInterfaceAdminPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 13)) ACCESS read-write STATUS mandatory DESCRIPTION "An prefix assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB." ::= { mpAtmInterfaceConfEntry 2 } mpAtmInterfaceAdminEsi OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 6)) ACCESS read-write STATUS mandatory DESCRIPTION "An ESI assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB." ::= { mpAtmInterfaceConfEntry 3 } mpAtmInterfaceMaxVpiVciBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object sets the maximum number of the sum of VPI/VCI bit number that are able to use at this interface." ::= { mpAtmInterfaceConfEntry 4 } mpAtmVccConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmVccConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains VCC configuration parameters, one entry per ATM interface port." ::= { mpAtm 2 } mpAtmVccConfigEntry OBJECT-TYPE SYNTAX MpAtmVccConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains VCC configuration parameters and state variables." INDEX { mpAtmVccIfIndex } ::= { mpAtmVccConfigTable 1 } MpAtmVccConfigEntry ::= SEQUENCE { mpAtmVccIfIndex INTEGER, mpAtmVccFrameFormat INTEGER, mpAtmVccF4OamSupport INTEGER, mpAtmVccF5OamSupport INTEGER, mpAtmVccFailTimerLof INTEGER, mpAtmVccFailTimerLos INTEGER, mpAtmVccRecoverTimerLof INTEGER, mpAtmVccRecoverTimerLos INTEGER, mpAtmVccFailTimerLop INTEGER, -- add @003 mpAtmVccRecoverTimerLop INTEGER, -- add @003 mpAtmVccCdv INTEGER, -- add @003 mpAtmVccClockMode INTEGER -- add @003 } mpAtmVccIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmVccConfigEntry 1 } mpAtmVccFrameFormat OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of frame format for use at this ATM interface." ::= { mpAtmVccConfigEntry 2 } mpAtmVccF4OamSupport OBJECT-TYPE SYNTAX INTEGER { support(1), nonSupport(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the F4 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported." ::= { mpAtmVccConfigEntry 3 } mpAtmVccF5OamSupport OBJECT-TYPE SYNTAX INTEGER { support(1), nonSupport(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the F5 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported." ::= { mpAtmVccConfigEntry 4 } mpAtmVccFailTimerLof OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOF (Loss of Frames) failure detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 5 } mpAtmVccFailTimerLos OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOS (Loss of Signal) failure detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 6 } mpAtmVccRecoverTimerLof OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOF (Loss of Frames) recovery detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 7 } mpAtmVccRecoverTimerLos OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOS (Loss of Signal) recovery detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 8 } -- add this Object @003 mpAtmVccFailTimerLop OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOP (Loss of Pointer) failure detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 9 } -- add this Object @003 mpAtmVccRecoverTimerLop OBJECT-TYPE SYNTAX INTEGER -- value = 100*n (n=1,2,3,..,600) ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the LOP (Loss of Pointer) recovery detection timer (msec). It is possible to set the integer of a multiple of 100." ::= { mpAtmVccConfigEntry 10 } -- add this Object @003 mpAtmVccCdv OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the value of CDV(Cell Delay Variation) which is used for ATM Mega-Link." ::= { mpAtmVccConfigEntry 11 } -- add this Object @003 mpAtmVccClockMode OBJECT-TYPE SYNTAX INTEGER { line(1), internal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set clock mode of ATM. If it is set to '1', the clock received from the line is used. If it is set to '2', the internal clock is used." ::= { mpAtmVccConfigEntry 12 } mpAtmSscopConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmSscopConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of SSCOP layer parameter configuration." ::= { mpAtm 3 } mpAtmSscopConfigEntry OBJECT-TYPE SYNTAX MpAtmSscopConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of SSCOP layer configuration." INDEX { mpAtmSscopIfIndex } ::= { mpAtmSscopConfigTable 1 } MpAtmSscopConfigEntry ::= SEQUENCE { mpAtmSscopIfIndex INTEGER, mpAtmSscopTimerConnectControl INTEGER, mpAtmSscopTimerKeepalive INTEGER, mpAtmSscopTimerNoResponse INTEGER, mpAtmSscopTimerPoll INTEGER, mpAtmSscopTimerIdle INTEGER, mpAtmSscopMaxConnectControl INTEGER, mpAtmSscopMaxPd INTEGER } mpAtmSscopIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmSscopConfigEntry 1 } mpAtmSscopTimerConnectControl OBJECT-TYPE SYNTAX INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the SSCOP connection control PDU re-sending interval timer (msec). The timer value must be the same as the that of the equipment connected to itself. It is possible to set the integer of a multiple of 250." ::= { mpAtmSscopConfigEntry 2 } mpAtmSscopTimerKeepalive OBJECT-TYPE SYNTAX INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the POLL PDU re-sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250." ::= { mpAtmSscopConfigEntry 3 } mpAtmSscopTimerNoResponse OBJECT-TYPE SYNTAX INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the STAT PDU waiting timer (msec). This is the connection observation timer in the data transmission phase. When it expires, the connection is disconnected. The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250." ::= { mpAtmSscopConfigEntry 4 } mpAtmSscopTimerPoll OBJECT-TYPE SYNTAX INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the POLL PDU sending interval timer in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250." ::= { mpAtmSscopConfigEntry 5 } mpAtmSscopTimerIdle OBJECT-TYPE SYNTAX INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "It is used to set the timer value of the POLL PDU sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250." ::= { mpAtmSscopConfigEntry 6 } mpAtmSscopMaxConnectControl OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the MAX retry count value of the SSCOP connection control PDU sending." ::= { mpAtmSscopConfigEntry 7 } mpAtmSscopMaxPd OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- ITU-T. ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the sending timing of the POLL PDU. After the PDUs as many as the number specified by this object are sent, one POLL PDU is sent." ::= { mpAtmSscopConfigEntry 8 } mpAtmSignalingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmSignalingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM Signaling configuration parameters, one entry per ATM interface port." ::= { mpAtm 4 } mpAtmSignalingConfigEntry OBJECT-TYPE SYNTAX MpAtmSignalingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ATM signaling configuration parameters and state variables." INDEX { mpAtmSigIfIndex } ::= { mpAtmSignalingConfigTable 1 } MpAtmSignalingConfigEntry ::= SEQUENCE { mpAtmSigIfIndex INTEGER, mpAtmSigSvcSupportFlag INTEGER, mpAtmSigUniVersion INTEGER } mpAtmSigIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmSignalingConfigEntry 1 } mpAtmSigSvcSupportFlag OBJECT-TYPE SYNTAX INTEGER { support(1), nonSupport(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SVC functionality is supported or not, for the ATM interface of this equipment. If it is set to '1', SVC functionality is supported. If it is set to '2', it is not supported." ::= { mpAtmSignalingConfigEntry 2 } mpAtmSigUniVersion OBJECT-TYPE SYNTAX INTEGER { uni3-0(1), uni3-1(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the ATM Forum UNI version which is used by the ATM ports of this equipment as the ATM Signaling functionality. This object can be set only when all the ATM ports are closed. It is set to '1' in the case of UNI3.0, and is set to '2' in the case of UNI3.1." ::= { mpAtmSignalingConfigEntry 3 } mpAtmIlmiConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmIlmiConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ILMI configuration parameters, one entry per ATM interface port." ::= { mpAtm 5 } mpAtmIlmiConfigEntry OBJECT-TYPE SYNTAX MpAtmIlmiConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ILMI configuration parameters and state variables." INDEX { mpAtmIlmiIfIndex } ::= { mpAtmIlmiConfigTable 1 } MpAtmIlmiConfigEntry ::= SEQUENCE { mpAtmIlmiIfIndex INTEGER, mpAtmIlmiFlag INTEGER } mpAtmIlmiIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmIlmiConfigEntry 1 } mpAtmIlmiFlag OBJECT-TYPE SYNTAX INTEGER { support(1), nonSupport(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates ILMI Function support status." ::= { mpAtmIlmiConfigEntry 2 } mpAtmStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the statistics data of the SONET or SDH base ATM interface." ::= { mpAtm 6 } mpAtmStatisticsEntry OBJECT-TYPE SYNTAX MpAtmStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the statistics data of each ATM interface." INDEX { mpAtmStatIfIndex } ::= { mpAtmStatisticsTable 1 } MpAtmStatisticsEntry ::= SEQUENCE { mpAtmStatIfIndex INTEGER, mpAtmStatVpiVciErrs Counter, mpAtmStatRcvOverRunErrs Counter, mpAtmStatInvalidCellErrs Counter, mpAtmStatRcvBufEmptys Counter, mpAtmStatRcvStsAlmostFulls Counter, mpAtmStatSndStsAlmostFulls Counter, mpAtmStatOolErrs Counter, mpAtmStatLocErrs Counter, mpAtmStatHecErrs Counter, mpAtmStatOcdErrs Counter, mpAtmStatTcOverFlowErrs Counter, mpAtmStatParityErrs Counter, mpAtmStatC2Errs Counter, mpAtmStatLopErrs Counter, mpAtmStatPaisErrs Counter, mpAtmStatPrdiErrs Counter, mpAtmStatB3Errs Counter, mpAtmStatPathFebeErrs Counter, mpAtmStatB2Errs Counter, mpAtmStatLineFebeErrs Counter, mpAtmStatLaisErrs Counter, mpAtmStatLrdiErrs Counter, mpAtmStatOofErrs Counter, mpAtmStatB1Errs Counter, mpAtmStatLosErrs Counter, mpAtmStatLofErrs Counter, mpAtmStatInPackets Counter, mpAtmStatInOctets Counter, mpAtmStatOutPackets Counter, mpAtmStatOutOctets Counter } mpAtmStatIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface uniquely within the equipment. Each ATM interface identified by this object is the same ATM interface identified by the ifIndex." ::= { mpAtmStatisticsEntry 1 } mpAtmStatVpiVciErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the VPI/VCI error." ::= { mpAtmStatisticsEntry 2 } mpAtmStatRcvOverRunErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the receiving FIFO over-run error." ::= { mpAtmStatisticsEntry 3 } mpAtmStatInvalidCellErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the received invalid cell." ::= { mpAtmStatisticsEntry 4 } mpAtmStatRcvBufEmptys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the received free buffer empty." ::= { mpAtmStatisticsEntry 5 } mpAtmStatRcvStsAlmostFulls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the Rx Status Queue Almost Full." ::= { mpAtmStatisticsEntry 6 } mpAtmStatSndStsAlmostFulls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the Tx Status Queue Almost Full." ::= { mpAtmStatisticsEntry 7 } mpAtmStatOolErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates OOL(Out of Lock) error counter value." ::= { mpAtmStatisticsEntry 8 } mpAtmStatLocErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates LOC(Loss Of Cell Delineation) error counter value." ::= { mpAtmStatisticsEntry 9 } mpAtmStatHecErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the ATM cell HEC error counter value." ::= { mpAtmStatisticsEntry 10 } mpAtmStatOcdErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates OCD(Out Of Cell Delineation) error counter value." ::= { mpAtmStatisticsEntry 11 } mpAtmStatTcOverFlowErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the FIFO overflow." ::= { mpAtmStatisticsEntry 12 } mpAtmStatParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the parity error." ::= { mpAtmStatisticsEntry 13 } mpAtmStatC2Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the C2 error counter value." ::= { mpAtmStatisticsEntry 14 } mpAtmStatLopErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the LOP(Loss of Pointer) error counter value." ::= { mpAtmStatisticsEntry 15 } mpAtmStatPaisErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Path Alarm Indication error counter value." ::= { mpAtmStatisticsEntry 16 } mpAtmStatPrdiErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Path Remote Path Indication error counter value." ::= { mpAtmStatisticsEntry 17 } mpAtmStatB3Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the B3 error counter value." ::= { mpAtmStatisticsEntry 18 } mpAtmStatPathFebeErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Path FEBE error counter value." ::= { mpAtmStatisticsEntry 19 } mpAtmStatB2Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the B2 error counter value." ::= { mpAtmStatisticsEntry 20 } mpAtmStatLineFebeErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Line FEBE error counter value." ::= { mpAtmStatisticsEntry 21 } mpAtmStatLaisErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Line Alarm Indication error counter value." ::= { mpAtmStatisticsEntry 22 } mpAtmStatLrdiErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Line Remote Path indication error counter value." ::= { mpAtmStatisticsEntry 23 } mpAtmStatOofErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the OOF(Out of Frame) error counter value." ::= { mpAtmStatisticsEntry 24 } mpAtmStatB1Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the B1 error counter value." ::= { mpAtmStatisticsEntry 25 } mpAtmStatLosErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the LOS(Loss of Signal) error counter value." ::= { mpAtmStatisticsEntry 26 } mpAtmStatLofErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Inicates the LOF(Loss of Frame) error counter value." ::= { mpAtmStatisticsEntry 27 } mpAtmStatInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the incoming packets." ::= { mpAtmStatisticsEntry 28 } mpAtmStatInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the incoming octets." ::= { mpAtmStatisticsEntry 29 } mpAtmStatOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the outgoing packets." ::= { mpAtmStatisticsEntry 30 } mpAtmStatOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the counter value of the outgoing octets." ::= { mpAtmStatisticsEntry 31 } mpAtmNetPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains network prefix of ATM address got by ILMI." ::= { mpAtm 7} mpAtmNetPrefixEntry OBJECT-TYPE SYNTAX MpAtmNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains network prefix of ATM address got by ILMI." INDEX { mpAtmNetPrefixPort, mpAtmNetPrefixPrefix } ::= { mpAtmNetPrefixTable 1 } MpAtmNetPrefixEntry ::= SEQUENCE { mpAtmNetPrefixPort INTEGER, mpAtmNetPrefixPrefix NetPrefix, mpAtmNetPrefixStatus INTEGER } mpAtmNetPrefixPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies the ATM Port." ::= { mpAtmNetPrefixEntry 1 } mpAtmNetPrefixPrefix OBJECT-TYPE SYNTAX NetPrefix ACCESS read-only STATUS mandatory DESCRIPTION "The network Prefix for ATM address." ::= { mpAtmNetPrefixEntry 2 } mpAtmNetPrefixStatus OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the validity of the network prefix." ::= { mpAtmNetPrefixEntry 3 } -- add this Object @003 mpAtmVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmVpcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains VPL configuration parameters, one entry per ATM interface port." ::= { mpAtm 8 } -- add this Object @003 mpAtmVpcEntry OBJECT-TYPE SYNTAX MpAtmVpcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains VPL configuration parameters and state variables." INDEX { mpAtmVpcIfIndex, mpAtmVpcVpi } ::= { mpAtmVpcTable 1 } -- add this Object @003 MpAtmVpcEntry ::= SEQUENCE { mpAtmVpcIfIndex INTEGER, mpAtmVpcVpi INTEGER, mpAtmVpcAdminStatus INTEGER, mpAtmVpcOperStatus INTEGER, mpAtmVpcLastChange TimeStamp, mpAtmVpcShapingType INTEGER , mpAtmVpcTransmitTrafficDescrIndex INTEGER , mpAtmVpcRowStatus RowStatus } -- add this Object @003 mpAtmVpcIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex." ::= { mpAtmVpcEntry 1 } -- add this Object @003 mpAtmVpcVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits." ::= { mpAtmVpcEntry 2 } -- add this Object @003 mpAtmVpcAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL. The up and down states indicate that the traffic flow is enabled and disabled respectively for this VPL." ::= { mpAtmVpcEntry 3 } -- add this Object @003 mpAtmVpcOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, respectively. The unknown state indicates that the status of this VPL cannot be determined." ::= { mpAtmVpcEntry 4 } -- add this Object @003 mpAtmVpcLastChange OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value." ::= { mpAtmVpcEntry 5 } -- add this Object @003 mpAtmVpcShapingType OBJECT-TYPE SYNTAX INTEGER { vpShaping(1), vcShaping(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates shaping type used for VPC status." ::= { mpAtmVpcEntry 6 } -- add this Object @003 mpAtmVpcTransmitTrafficDescrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL." ::= { mpAtmVpcEntry 7 } -- add this Object @003 mpAtmVpcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex. In addition, if the local VCL end-point is also the VCC end-point: atmVccAalType. In addition, for AAL5 connections only: atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, and atmVccAal5EncapsType." ::= { mpAtmVpcEntry 8 } -- add this Object @003 mpAtmTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF MpAtmTrafficEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on ATM traffic parameters." ::= { mpAtm 9 } -- add this Object @003 mpAtmTrafficEntry OBJECT-TYPE SYNTAX MpAtmTrafficEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ATM traffic parameters." INDEX { mpAtmTrafficDescrParamIndex } ::= { mpAtmTrafficTable 1 } -- add this Object @003 MpAtmTrafficEntry ::= SEQUENCE { mpAtmTrafficDescrParamIndex INTEGER, mpAtmTrafficCdv INTEGER } -- add this Object @003 mpAtmTrafficDescrParamIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index of ATM traffic entry." ::= { mpAtmTrafficEntry 1 } -- add this Object @003 mpAtmTrafficCdv OBJECT-TYPE SYNTAX INTEGER (0..750) ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the CDV(Cell Delay Variation) value" ::= { mpAtmTrafficEntry 2 } -- *************************************************************************** -- the SanFran LIS Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpLisNameTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLisNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that is used for registoring LIS name." ::= { mpLis 1 } mpLisNameEntry OBJECT-TYPE SYNTAX MpLisNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of LIS name." INDEX { mpLisIndex } ::= { mpLisNameTable 1 } MpLisNameEntry ::= SEQUENCE { mpLisIndex INTEGER, mpLisRtrIndex INTEGER, mpLisName DisplayString, mpLisNameStatus INTEGER } mpLisIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A number that uniquely assigned to the LIS." ::= { mpLisNameEntry 1 } mpLisRtrIndex OBJECT-TYPE SYNTAX INTEGER -- These values are defined by a -- configuration file. ACCESS read-only STATUS mandatory DESCRIPTION "An interface number that uniquely assigned to the LIS of the Unit. The LIS recognized by this number is the same as what is recognized by same number of ifIndex." ::= { mpLisNameEntry 2 } mpLisName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "A name assigned to the LIS for management purpose. This object is used for setting or changing a name of the LIS." ::= { mpLisNameEntry 3 } mpLisNameStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used for registoring or deleting an entry of the table. 1 is set when registroing and 2 is set when deletion." ::= { mpLisNameEntry 4 } mpLisAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLisAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table including LIS information." ::= { mpLis 2 } mpLisAdminEntry OBJECT-TYPE SYNTAX MpLisAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in LIS management table. Registoring LIS (1) Manager satation generates a LIS entry in mpLisAdminTable by setting mpLisAdmRowStatus as createAndWait(5). (2) Manager station, if necessary, sets value of management object of mpLisAdminTable. (3) Manager station enables a LIS entry by setting mpLisAdmRowStatus as active(1). Deletion of LIS (1) Manager station disables a LIS entry bu setting mpLisAdmRowStatus as notInService(2). (2) A LIS is deleted by setting mpLisAdmRowStatus as destroy(6). An agent may release all related resources at the moment." INDEX { mpLisAdmIndex } ::= { mpLisAdminTable 1 } MpLisAdminEntry ::= SEQUENCE { mpLisAdmIndex INTEGER, mpLisAdmAtmArpSvExistence INTEGER, mpLisAdmAtmArpSvCallType INTEGER, mpLisAdmAtmArpSvAtmAddress OCTET STRING, mpLisAdmAtmArpSvAtmPortNumber INTEGER, mpLisAdmAtmArpSvVpi INTEGER, mpLisAdmAtmArpSvVci INTEGER, mpLisAdmSvTrafficId INTEGER, mpLisAdmAtmArpSvVcStatus INTEGER, mpLisAdmAtmArpSvRetryCount INTEGER, mpLisAdmLisStatus INTEGER, mpLisAdmMyAtmAddressSel OCTET STRING, mpLisAdmMyIpAddress IpAddress, mpLisAdmMyNetMask IpAddress, mpLisAdmAtmPortNumber INTEGER, mpLisAdmAtmArpTables INTEGER, mpLisAdmSndMtuSize INTEGER, mpLisAdmRcvMtuSize INTEGER, mpLisAdmTrafficId INTEGER, mpLisAdmRowStatus RowStatus } mpLisAdmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows a unique number assigned to this LIS." ::= { mpLisAdminEntry 1 } mpLisAdmAtmArpSvExistence OBJECT-TYPE SYNTAX INTEGER { existence(1), notExisting(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies extistence or non-existence of ATM ARP server. If it exists, 1 is set. If it does not exist, 2 is set." ::= { mpLisAdminEntry 2 } mpLisAdmAtmArpSvCallType OBJECT-TYPE SYNTAX INTEGER { svc(1), pcv(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object shows a type of connection between the LIS and an ATM ARP server. If it is SVC, 1 is shown. If it is PVC, 2 is shown." ::= { mpLisAdminEntry 3 } mpLisAdmAtmArpSvAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns ATM address of an ATM ARP server in the LIS." ::= { mpLisAdminEntry 4 } mpLisAdmAtmArpSvAtmPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of ATM port which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of ATM port." ::= { mpLisAdminEntry 5 } mpLisAdmAtmArpSvVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of VPI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VPI." ::= { mpLisAdminEntry 6 } mpLisAdmAtmArpSvVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of VCI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VCI." ::= { mpLisAdminEntry 7 } mpLisAdmSvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of traffic ID which is used when the LIS is connected to the ATM server." ::= { mpLisAdminEntry 8 } mpLisAdmAtmArpSvVcStatus OBJECT-TYPE SYNTAX INTEGER { open(1), setting(2), usable(3), sendToAtm(4), sendAndRcvAtm(5), rcvFromAtm(6), disconnect(7), disconnectWaiting(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows status of connection between the LIS and an ATM ARP server in follwing number: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconnected = 7 Waiting for disconnection = 8" ::= { mpLisAdminEntry 9 } mpLisAdmAtmArpSvRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of retrying of connection request caused by connection failure between ATM ARP server and the LIS." ::= { mpLisAdminEntry 10 } mpLisAdmLisStatus OBJECT-TYPE SYNTAX INTEGER { usable(1), in-ATM-ARP-request-waiting(2), down(3), notInService(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows status of connection between the LIS and an ATM ARP server in following number: the LIS is available = 1 waiting for In-ATM-ARP-request = 2 not available due to failure = 3 not available by configuration = 4" ::= { mpLisAdminEntry 11 } mpLisAdmMyAtmAddressSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE( 0 | 1 )) ACCESS read-write STATUS mandatory DESCRIPTION "This object assignes ATM address that is used by the LIS interface." ::= { mpLisAdminEntry 12 } mpLisAdmMyIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object assignes IP address that is used by the LIS interface." ::= { mpLisAdminEntry 13 } mpLisAdmMyNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object assignes subnet mask of IP addresss that is used by the LIS interface." ::= { mpLisAdminEntry 14 } mpLisAdmAtmPortNumber OBJECT-TYPE -- @008 SYNTAX IpAddress SYNTAX INTEGER -- @008 ACCESS read-only ACCESS read-write STATUS mandatory DESCRIPTION "This object assignes number of ATM port that is used by the LIS interface." ::= { mpLisAdminEntry 15 } mpLisAdmAtmArpTables OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of ARP tables that are registored in the LIS." ::= { mpLisAdminEntry 16 } mpLisAdmSndMtuSize OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- RFC1755. ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns the maximum size of transmitted AAL5 CPCS PDU payload in octet." ::= { mpLisAdminEntry 17 } mpLisAdmRcvMtuSize OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- RFC1755. ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns the maximum size of received AAL5 CPCS PDU payload in octet." ::= { mpLisAdminEntry 18 } mpLisAdmTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the number of default traffic ID that is used by the LIS interface." ::= { mpLisAdminEntry 19 } mpLisAdmRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The object is used for generating, deleting or modifying a row of the table. In case of of modifying this entry, this object must be changed from active(1) to notInService(2)." ::= { mpLisAdminEntry 20 } mpLisAtmArpAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLisAtmArpAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table includes information of ATM ARP table." ::= { mpLis 3 } mpLisAtmArpAdminEntry OBJECT-TYPE SYNTAX MpLisAtmArpAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The entry includes information of each ATM ARP table. Registration of PVC or static SVC (1) Manager generates an ATM ARP management entry in mpLisAtmArpAdminTable by setting mpLisAtmArpAdmRowStatus as createAndWait(5). (2) Manager sets the number of management object of mpLisAtmArpAdminTable if necessary. (3) Manager enables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as active(1). Deletion of PVC or static SVC (1) Manager disables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as notInService(2). (2) ATM ARP is deleted by setting mpLisAtmArpAdmRowStatus as destroy(6). An agent may release all related resources at the moment." INDEX { mpLisAtmArpAdmLisIndex, mpLisAtmArpAdmIpAddress } ::= { mpLisAtmArpAdminTable 1 } MpLisAtmArpAdminEntry ::= SEQUENCE { mpLisAtmArpAdmLisIndex INTEGER, mpLisAtmArpAdmCallType INTEGER, mpLisAtmArpAdmIpAddress IpAddress, mpLisAtmArpAdmAtmAddress OCTET STRING, mpLisAtmArpAdmMyAtmAddress OCTET STRING, mpLisAtmArpAdmAtmPortNumber INTEGER, mpLisAtmArpAdmVpi INTEGER, mpLisAtmArpAdmVci INTEGER, mpLisAtmArpAdmTrafficId INTEGER, mpLisAtmArpAdmTableStatus INTEGER, mpLisAtmArpAdmAgingTime Gauge, mpLisAtmArpAdmRetryCount INTEGER, mpLisAtmArpAdmRowStatus RowStatus } mpLisAtmArpAdmLisIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the unique number assigned to the LIS." ::= { mpLisAtmArpAdminEntry 1 } mpLisAtmArpAdmCallType OBJECT-TYPE SYNTAX INTEGER { dynamicSvc(1), staticSvc(2), agingPvc(3), noAgingPvc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the type of connection between ATM ARP client and the LIS. If it is dynamic SVC, 1 is shown. If it is static SVC, 2 is shown. If it is PVC with aging, 3 is shown. If it is PVC without aging, 3 is shown." ::= { mpLisAtmArpAdminEntry 2 } mpLisAtmArpAdmIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object is used for configuring or acknowledging of destination IP address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination IP address." ::= { mpLisAtmArpAdminEntry 3 } mpLisAtmArpAdmAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used for configuring or acknowledging of destination ATM address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination ATM address." ::= { mpLisAtmArpAdminEntry 4 } mpLisAtmArpAdmMyAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "This object assigns an ATM address that is used at the interface of the LIS." ::= { mpLisAtmArpAdminEntry 5 } mpLisAtmArpAdmAtmPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of ATM port which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of ATM port." ::= { mpLisAtmArpAdminEntry 6 } mpLisAtmArpAdmVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of VPI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VPI." ::= { mpLisAtmArpAdminEntry 7 } mpLisAtmArpAdmVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of VCI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VCI." ::= { mpLisAtmArpAdminEntry 8 } mpLisAtmArpAdmTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the number of traffic ID that is used for PVC connection between ATM ARP cliennt and the LIS." ::= { mpLisAtmArpAdminEntry 9 } mpLisAtmArpAdmTableStatus OBJECT-TYPE SYNTAX INTEGER { usable(1), confirming(2), atmArpReplyWaiting(3), inAtmArpRequestWaiting(4), aging(5), noService(6), unused(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows status of ATM ARP table in follwing number: the table is available = 1 waiting for acknowledge of being available = 2 waiting for ATM-ARP-reply = 3 waiting for InATM-ARP-reply = 4 aging = 5 not available to service = 6 not available to use = 7" ::= { mpLisAtmArpAdminEntry 10 } mpLisAtmArpAdmAgingTime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the passing time value (sec) of the ATMARP table aging timer. The timer is incre- mented by 1 sec." ::= { mpLisAtmArpAdminEntry 11 } mpLisAtmArpAdmRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of retrying of connection request caused by connection failure between ATM ARP client and the LIS." ::= { mpLisAtmArpAdminEntry 12 } mpLisAtmArpAdmRowStatus OBJECT-TYPE SYNTAX RowStatus -- INTEGER { active(1), -- notInService(2), notReady(3), -- createAndWait(5), destroy(6) } -- The value 'createAndGo(4)' is not -- supported. ACCESS read-write STATUS mandatory DESCRIPTION "The object is used for generating, deleting or modifying a row of the table. In case of modifying this entry. This object must be changed from active(1) to notInService(2)." ::= { mpLisAtmArpAdminEntry 13 } mpLisVcAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLisVcAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table includes information of VC table." ::= { mpLis 4 } mpLisVcAdminEntry OBJECT-TYPE SYNTAX MpLisVcAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The entry includes information of each VC." INDEX { mpLisVcAdmLisIndex, mpLisVcAdmIpAddress } ::= { mpLisVcAdminTable 1 } MpLisVcAdminEntry ::= SEQUENCE { mpLisVcAdmLisIndex INTEGER, mpLisVcAdmIpAddress IpAddress, mpLisVcAdmType INTEGER, mpLisVcAdmVcStatus INTEGER, mpLisVcAdmInactivityTime Gauge, mpLisVcAdmHoldingTime Gauge } mpLisVcAdmLisIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the unique number assigned to the LIS." ::= { mpLisVcAdminEntry 1 } mpLisVcAdmIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object assign the destination IP address." ::= { mpLisVcAdminEntry 2 } mpLisVcAdmType OBJECT-TYPE SYNTAX INTEGER { send-out(1), receive-in(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the type of VC management table. If the table is generated by originating connection, the type is 1. If the table is generated by receiving connection, the type is 2." ::= { mpLisVcAdminEntry 3 } mpLisVcAdmVcStatus OBJECT-TYPE SYNTAX INTEGER { open(1), setting(2), usable(3), sendToAtm(4), sendAndRcvAtm(5), rcvFromAtm(6), disconnect(7), disconnectWaiting(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the status of VC connection as following numbers: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconected = 7 Waiting for disconection =8" ::= { mpLisVcAdminEntry 4 } mpLisVcAdmInactivityTime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the passing time value (sec) of the inactivity timer. The timer is incremented by 1 sec." ::= { mpLisVcAdminEntry 5 } mpLisVcAdmHoldingTime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the remaining time value (sec) of the holding timer. The timer is incremented by 1 sec." ::= { mpLisVcAdminEntry 6 } mpLisStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLisStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object includes statistics information of the LIS." ::= { mpLis 5 } mpLisStatisticsEntry OBJECT-TYPE SYNTAX MpLisStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry includes counters of each statistics information." INDEX { mpLisStatIndex } ::= { mpLisStatisticsTable 1 } MpLisStatisticsEntry ::= SEQUENCE { mpLisStatIndex INTEGER, mpLisStatAtmArpRequestSends Counter, mpLisStatAtmArpReplyReceives Counter, mpLisStatAtmArpNakReceives Counter, mpLisStatAtmArpReplyTimeouts Counter, mpLisStatInAtmArpRequestSends Counter, mpLisStatInAtmArpReplyReceives Counter, mpLisStatInAtmArpRequestReceives Counter, mpLisStatInAtmArpReplyTimeouts Counter, mpLisStatVcInactDisconnects Counter, mpLisStatVcResourceDisconnects Counter, mpLisStatAtmArpTableAgingouts Counter, mpLisStatAtmArpTableDeletions Counter, mpLisStatInPkts Counter, mpLisStatInReceivePkts Counter, mpLisStatInDiscards Counter, mpLisStatInMtuSizeOvers Counter, mpLisStatInSnapErrs Counter, mpLisStatOutPkts Counter, mpLisStatOutTransmitPkts Counter, mpLisStatOutNoRoutes Counter, mpLisStatOutSvFaults Counter, mpLisStatOutCircuitFaults Counter, mpLisStatOutMaxQueues Counter, mpLisStatOutDestUnusuals Counter, mpLisStatOutMtuSizeOvers Counter, mpLisStatOutVcFailures Counter, mpLisStatOutDiscards Counter, mpLisStatOutMaxVcExceeds Counter, mpLisStatVcSetupCounts Counter, mpLisStatVcMaxExceedFailCounts Counter, mpLisStatVcResourceFailCounts Counter, mpLisStatVcAcceptCounts Counter, mpLisStatVcMaxExceedDenyCounts Counter, mpLisStatVcResourceDenyCounts Counter } mpLisStatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the unique number assigned to the LIS." ::= { mpLisStatisticsEntry 1 } mpLisStatAtmArpRequestSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of transmission of ATM ARP request." ::= { mpLisStatisticsEntry 2 } mpLisStatAtmArpReplyReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of receiving of ATM ARP reply." ::= { mpLisStatisticsEntry 3 } mpLisStatAtmArpNakReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of receiving of ATM ARP NAK." ::= { mpLisStatisticsEntry 4 } mpLisStatAtmArpReplyTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of timed-out in waiting for ATM ARP reply." ::= { mpLisStatisticsEntry 5 } mpLisStatInAtmArpRequestSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of transmission of InATM ARP request." ::= { mpLisStatisticsEntry 6 } mpLisStatInAtmArpReplyReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of receiving of InATM ARP reply." ::= { mpLisStatisticsEntry 7 } mpLisStatInAtmArpRequestReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of receiving of InATM ARP request." ::= { mpLisStatisticsEntry 8 } mpLisStatInAtmArpReplyTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of timed-out in waiting for InATM ARP reply." ::= { mpLisStatisticsEntry 9 } mpLisStatVcInactDisconnects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of disconenction by inactivity timer." ::= { mpLisStatisticsEntry 10 } mpLisStatVcResourceDisconnects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of disconenction by resource limitation." ::= { mpLisStatisticsEntry 11 } mpLisStatAtmArpTableAgingouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of ATM ARP table that is deleted due to aged out." ::= { mpLisStatisticsEntry 12 } mpLisStatAtmArpTableDeletions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of ATM ARP table that is deleted due to resource limitation." ::= { mpLisStatisticsEntry 13 } mpLisStatInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of packets transmitted to IP router part." ::= { mpLisStatisticsEntry 14 } mpLisStatInReceivePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of packets received from ATM interface." ::= { mpLisStatisticsEntry 15 } mpLisStatInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of packets that are discarded due to resource limitation." ::= { mpLisStatisticsEntry 16 } mpLisStatInMtuSizeOvers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to exceeding MTU." ::= { mpLisStatisticsEntry 17 } mpLisStatInSnapErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to format error of SNAP in IP over ATM." ::= { mpLisStatisticsEntry 18 } mpLisStatOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of packets received from IP router part." ::= { mpLisStatisticsEntry 19 } mpLisStatOutTransmitPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of packets transmitted to ATM interface." ::= { mpLisStatisticsEntry 20 } mpLisStatOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " This object show the number of discarded packets due to route unknown." ::= { mpLisStatisticsEntry 21 } mpLisStatOutSvFaults OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to failure of ATM ARP server." ::= { mpLisStatisticsEntry 22 } mpLisStatOutCircuitFaults OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to failure of link." ::= { mpLisStatisticsEntry 23 } mpLisStatOutMaxQueues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to overflowing queue." ::= { mpLisStatisticsEntry 24 } mpLisStatOutDestUnusuals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to illegal destination." ::= { mpLisStatisticsEntry 25 } mpLisStatOutMtuSizeOvers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets that are received from IP router part due to exceeding MTU." ::= { mpLisStatisticsEntry 26 } mpLisStatOutVcFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to configuration failure of connection." ::= { mpLisStatisticsEntry 27 } mpLisStatOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to resource limitation in transmitting." ::= { mpLisStatisticsEntry 28 } mpLisStatOutMaxVcExceeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object show the number of discarded packets due to exceeding the maximum number of VC connection." ::= { mpLisStatisticsEntry 29 } mpLisStatVcSetupCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of configuring of call." ::= { mpLisStatisticsEntry 30 } mpLisStatVcMaxExceedFailCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of failure of call configuration due to exceeding the maximum simultaneous connections of VC." ::= { mpLisStatisticsEntry 31 } mpLisStatVcResourceFailCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of failure of call configuration due to resource limitation." ::= { mpLisStatisticsEntry 32 } mpLisStatVcAcceptCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of called by ATM ARP client." ::= { mpLisStatisticsEntry 33 } mpLisStatVcMaxExceedDenyCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of refusing incoming call due to exceeding the maximum simultaneous connections of VC." ::= { mpLisStatisticsEntry 34 } mpLisStatVcResourceDenyCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the number of refusing incoming call due to resource limitation." ::= { mpLisStatisticsEntry 35 } mpLisPvcRegistNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the total number of currently registored PVC." ::= { mpLis 6 } mpLisStSvcRegistNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the total number of currently registored static SVC." ::= { mpLis 7 } mpLisVcConnectNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the total number of currently connected VC in IP over ATM functional block." ::= { mpLis 8 } mpLisSysInactivityTimer OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- RFC1755. ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the value of inactivity timer in second." ::= { mpLis 9 } mpLisSysHoldingTimer OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- RFC1755. ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the value of holding timer in second." ::= { mpLis 10 } mpLisSysAtmArpReplyTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the value of ATM ARP reply waiting timer in second." ::= { mpLis 11 } mpLisSysInAtmArpRequestTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the value of In ATM ARP request waiting timer in second." ::= { mpLis 12 } mpLisSysInAtmArpReplyTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object shows the value of In ATM ARP reply waiting timer in second." ::= { mpLis 13 } mpLisSysAtmArpAgingTime OBJECT-TYPE SYNTAX INTEGER -- The default value is recommended by -- RFC1577. ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the aging time of ATM ARP in second." ::= { mpLis 14 } mpLisSysAtmArpSvPollTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This obhject sets cycle time to check status of VC connection of ATM ARP server in second." ::= { mpLis 15 } mpLisSysAtmArpSvRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the number of retrying in case of failure of call configuration to ATM ARP server." ::= { mpLis 16 } mpLisSysAtmArpClRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the number of retrying in case of failure of call configuration to ATM ARP client." ::= { mpLis 17 } mpLisSysAtmArpReqRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object sets tne number of retrying of ATM ARP request in case of no response from ATM ARP server to which ATM ARP request is sent before timer expiration." ::= { mpLis 18 } mpLisSysInAtmArpReqRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object sets tne number of retrying of InATM ARP request in case of no response from ATM ARP client to which InATM ARP request is sent before timer expiration." ::= { mpLis 19 } mpLisSysMaxVcConnect OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the maximum number of simultaneous connections that is used in IP over ATM functional block. This number is the sum of PVC, dynamic SVC and static SVC that are able to connect simultaneously." ::= { mpLis 20 } mpLisSysMaxQueueNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The object sets the maximum number of queues include packets that are received from IP router." ::= { mpLis 21 } -- *************************************************************************** -- the SanFran DNS Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpDnsClientNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF MpDnsClientNameServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of DNS name server IP addresses." ::= { mpDns 1 } mpDnsClientNameServerEntry OBJECT-TYPE SYNTAX MpDnsClientNameServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of DNS name server IP address." INDEX { mpDnsClientServerEntIpAddress } ::= { mpDnsClientNameServerTable 1 } MpDnsClientNameServerEntry ::= SEQUENCE { mpDnsClientServerEntIpAddress IpAddress, mpDnsClientServerEntStatus INTEGER } mpDnsClientServerEntIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "DNS name server IP address." ::= { mpDnsClientNameServerEntry 1 } mpDnsClientServerEntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DNS name server table entry status." ::= { mpDnsClientNameServerEntry 2 } mpDnsClientStaticRRTable OBJECT-TYPE SYNTAX SEQUENCE OF MpDnsClientStaticRREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of DNS Resource Records(RR)." ::= { mpDns 2 } mpDnsClientStaticRREntry OBJECT-TYPE SYNTAX MpDnsClientStaticRREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of DNS Resource Record." INDEX { mpDnsClientStaticRREntIndex } ::= { mpDnsClientStaticRRTable 1 } MpDnsClientStaticRREntry ::= SEQUENCE { mpDnsClientStaticRREntIndex INTEGER, mpDnsClientStaticRREntHostName DisplayString, mpDnsClientStaticRREntTimeToLive INTEGER, mpDnsClientStaticRREntType INTEGER, mpDnsClientStaticRREntIpAddress IpAddress, mpDnsClientStaticRREntStatus INTEGER } mpDnsClientStaticRREntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of a particular entry." ::= { mpDnsClientStaticRREntry 1 } mpDnsClientStaticRREntHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "The RR's host name field." ::= { mpDnsClientStaticRREntry 2 } mpDnsClientStaticRREntTimeToLive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RR's Time to Live field. Currently, this value can be set to -1 (infinity) only." ::= { mpDnsClientStaticRREntry 3 } mpDnsClientStaticRREntType OBJECT-TYPE SYNTAX INTEGER { type-a(1) -- Host Address } ACCESS read-write STATUS mandatory DESCRIPTION "The RR's type field." ::= { mpDnsClientStaticRREntry 4 } mpDnsClientStaticRREntIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The RR's IP address field." ::= { mpDnsClientStaticRREntry 5 } mpDnsClientStaticRREntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The RR's entry status." ::= { mpDnsClientStaticRREntry 6 } mpDnsClientLocalDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF MpDnsClientLocalDomainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of DNS local domain names." ::= { mpDns 3 } mpDnsClientLocalDomainEntry OBJECT-TYPE SYNTAX MpDnsClientLocalDomainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of DNS local domain name." INDEX { mpDnsClientLocalDomainEntIndex } ::= { mpDnsClientLocalDomainTable 1 } MpDnsClientLocalDomainEntry ::= SEQUENCE { mpDnsClientLocalDomainEntIndex INTEGER, mpDnsClientLocalDomainEntName DisplayString, mpDnsClientLocalDomainEntStatus INTEGER } mpDnsClientLocalDomainEntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of a particular entry." ::= { mpDnsClientLocalDomainEntry 1 } mpDnsClientLocalDomainEntName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Local domain name field." ::= { mpDnsClientLocalDomainEntry 2 } mpDnsClientLocalDomainEntStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Local domain table entry status." ::= { mpDnsClientLocalDomainEntry 3 } mpDnsClientMaxTimeToLive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DNS cache maximum Time to Live(TTL)." ::= { mpDns 4 } mpDnsClientNumberOfQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A counter on how many RR queries have been sent to name server(s)." ::= { mpDns 5 } mpDnsClientNumberOfResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A counter on how many RR responses have been received from name server(s)." ::= { mpDns 6 } -- *************************************************************************** -- the SanFran LEC Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpLecConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLecConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the LEC information." ::= { mpLec 1 } mpLecConfigEntry OBJECT-TYPE SYNTAX MpLecConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the LEC information." INDEX { mpLecIndex } ::= { mpLecConfigTable 1 } MpLecConfigEntry ::= SEQUENCE { mpLecIndex INTEGER, mpLecArpCacheDeleteTime INTEGER, mpLecUnsolicArpResAccept INTEGER, mpLecVccAgingAction INTEGER, mpLecUnknownFrameSendTiming INTEGER, mpLecType INTEGER, mpLecPrimaryAtmInterface INTEGER, mpLecDefaultSendTrafficId INTEGER, mpLecAtmAddressSel OCTET STRING, mpLecDefaultRcvTrafficId INTEGER, mpLecLecsId INTEGER -- @012 } mpLecIndex OBJECT-TYPE SYNTAX INTEGER -- (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify this entry." ::= { mpLecConfigEntry 1 } mpLecArpCacheDeleteTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The aging time for the unused ARP cache entry (sec)." ::= { mpLecConfigEntry 2 } mpLecUnsolicArpResAccept OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether the LEC does the address learning by the LE_ARP_RESPONSE which is broadcasted to another LEC, or not. If the value 'enabled(1)' is set, the LEC does the address learning. If the value 'disabled(2)' is set, the LEC does not do the address learning." ::= { mpLecConfigEntry 3 } mpLecVccAgingAction OBJECT-TYPE SYNTAX INTEGER { noCut(1), myConnectCut(2), otherConnectCut(3), allCut(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether the LEC disconnects the unused VCC for a time defined as C12. The time value is given by the lecVCCTimeoutPeriod (LEC MIB). If the value 'noCut(1)' is set, the LEC does not disconnect the VCC. If the value 'myConnectCut(2)' is set, the LEC disconnects only the VCC which the LEC sets up. If the value 'otherConnectCut(3)' is set, the LEC disconnects only the VCC which the destination LEC sets up. If the value 'allCut(4)' is set, the LEC disconnects all the VCCs." ::= { mpLecConfigEntry 4 } mpLecUnknownFrameSendTiming OBJECT-TYPE SYNTAX INTEGER { soon(1), later(2), noSend(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the timing to send an unknown frame to the BUS. If the value 'soon(1)' is set, the LEC sends the packet immediately. If the value 'later(2)' is set, the LEC sends the packet after a time defined by mpLeUnknownFrameWaitTime. If the value 'noSend(3)' is set, the LEC does not send the packet." ::= { mpLecConfigEntry 5 } mpLecType OBJECT-TYPE SYNTAX INTEGER {atmForum(1), serverLess(2)} ACCESS read-write STATUS mandatory DESCRIPTION "Indicates one of the LEC types described as follows: a) The LEC defined by ATM Forum b) The proprietary LEC (serverless method) defined by NEC. If it is set to '1', this entry uses the method defined by ATM Forum. If it is set to '2', this entry uses the proprietary LEC defined by NEC." ::= { mpLecConfigEntry 6 } mpLecPrimaryAtmInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates number of ATM port which is used for decision of primary ATM address." ::= { mpLecConfigEntry 7 } mpLecDefaultSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the number of default send traffic ID that is used by LEC." ::= { mpLecConfigEntry 8 } mpLecAtmAddressSel OBJECT-TYPE SYNTAX OCTET STRING (1) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates SEL of primary ATM address for LEC" ::= { mpLecConfigEntry 9 } mpLecDefaultRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the number of default receive traffic ID that is used by LEC." ::= { mpLecConfigEntry 10 } -- @012 add START mpLecLecsId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the number of Lecs ID that is used by LEC." ::= { mpLecConfigEntry 11 } -- @012 add END mpLecsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLecsConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of LECS information." ::= { mpLec 2 } mpLecsConfigEntry OBJECT-TYPE SYNTAX MpLecsConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table entry of LECS information. LECS Registration: 1) The object 'mpLecsRowStatus' is set to 'createAndWait(5)', to create LECS entry into the table 'mpLecsConfigTable'. 2) The appropriate values are set to the object 'mpLecsConfigTable'. 3) 'active(1)' is set to the object 'mpLecRowStatus', to activate the LECS entry. LECS deletion: 1) 'notInService(2)' is set to the object 'mpLecsRowStatus', to deactivate the LECS entry. 2) 'destroy(6)' is set to the object 'mpLecRowStatus', to delete the LECS entry." INDEX { mpLecsIndex } ::= { mpLecsConfigTable 1 } MpLecsConfigEntry ::= SEQUENCE { mpLecsIndex INTEGER, mpLecsCallType INTEGER, mpLecsAtmAddress OCTET STRING, mpLecsInterface INTEGER, mpLecsConfigDirectVpi INTEGER, mpLecsConfigDirectVci INTEGER, mpLecsConfigDirectSendTrafficId INTEGER, mpLecsRowStatus RowStatus, mpLecsConfigDirectRcvTrafficId INTEGER } mpLecsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify this table entry." ::= { mpLecsConfigEntry 1 } mpLecsCallType OBJECT-TYPE SYNTAX INTEGER { staticSvc(1), pvc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of the connection between this LEC and the LECS. If it is set to '1', the type is SVC for ATM address registration. If it is set to '2', the type is PVC for VPI/VCI registration." ::= { mpLecsConfigEntry 2 } mpLecsAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM address of the LECS." ::= { mpLecsConfigEntry 3 } mpLecsInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number to which the LECS is connected." ::= { mpLecsConfigEntry 4 } mpLecsConfigDirectVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI of the Configuration Direct VCC." ::= { mpLecsConfigEntry 5 } mpLecsConfigDirectVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI of the Configuration Direct VCC." ::= { mpLecsConfigEntry 6 } mpLecsConfigDirectSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the send traffic ID of the Configuration Direct VCC." ::= { mpLecsConfigEntry 7 } mpLecsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete, or modify the row within this table. Within each conceptual mpLecsConfigTable row, objects which are writable may be modified regardless of the value of mpLecsRowStatus. It is not necessary to set a row's status to 'notInService' first." ::= { mpLecsConfigEntry 8 } mpLecsConfigDirectRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates receive the traffic ID of the Configuration Direct VCC." ::= { mpLecsConfigEntry 9 } mpLecServerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLecServerConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the Server Information." ::= { mpLec 3 } mpLecServerConfigEntry OBJECT-TYPE SYNTAX MpLecServerConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the Server Information." INDEX { mpLecSvIndex } ::= { mpLecServerConfigTable 1 } MpLecServerConfigEntry ::= SEQUENCE { mpLecSvIndex INTEGER, mpLecSvConfigLecsType INTEGER, mpLecSvConfigLecsIndex INTEGER, mpLecSvLesCallType INTEGER, mpLecSvCtrlDirectVccInterface INTEGER, mpLecSvCtrlDirectVpi INTEGER, mpLecSvCtrlDirectVci INTEGER, mpLecSvCtrlDirectSendTrafficId INTEGER, mpLecSvCtrlDistributeVccInterface INTEGER, mpLecSvCtrlDistributeVpi INTEGER, mpLecSvCtrlDistributeVci INTEGER, mpLecSvCtrlDistributeSendTrafficId INTEGER, mpLecSvBusCallType INTEGER, mpLecSvMcastSendVccInterface INTEGER, mpLecSvMcastSendVpi INTEGER, mpLecSvMcastSendVci INTEGER, mpLecSvMcastSendSendTrafficId INTEGER, mpLecSvMcastForwardVccInterface INTEGER, mpLecSvMcastForwardVpi INTEGER, mpLecSvMcastForwardVci INTEGER, mpLecSvMcastForwardSendTrafficId INTEGER, mpLecSvCtrlDirectRcvTrafficId INTEGER, mpLecSvCtrlDistributeRcvTrafficId INTEGER, mpLecSvMcastSendRcvTrafficId INTEGER, mpLecSvMcastForwardRcvTrafficId INTEGER } mpLecSvIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the lecIndex of the LEC which corresponds to this entry." ::= { mpLecServerConfigEntry 1 } mpLecSvConfigLecsType OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the LECS registered in the table 'mpLecsConfigTable' is used or not, when 'automatic(1)' is set to the object 'lecConfigMode'(LEC MIB). If it is set to '2', the LECS is not used. In case when the LECS registered is not used, the LECS should be specified by the method defined by ATM Forum." ::= { mpLecServerConfigEntry 2 } mpLecSvConfigLecsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the 'mpLecsIndex' of the table 'mpLecsConfigTable', to identify the LECS. This object is valid only when 'enable(1)' is set to the object 'mpLecsSvConfigLecsType'." ::= { mpLecServerConfigEntry 3 } mpLecSvLesCallType OBJECT-TYPE SYNTAX INTEGER { staticSvc(1), pvc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of the connection between this LEC and the LES." ::= { mpLecServerConfigEntry 4 } mpLecSvCtrlDirectVccInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number on which the Control Direct VCC is set." ::= { mpLecServerConfigEntry 5 } mpLecSvCtrlDirectVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI of this Control Direct VCC." ::= { mpLecServerConfigEntry 6 } mpLecSvCtrlDirectVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI of this Control Direct VCC." ::= { mpLecServerConfigEntry 7 } mpLecSvCtrlDirectSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the shaper send traffic ID of the Control Direct VCC." ::= { mpLecServerConfigEntry 8 } mpLecSvCtrlDistributeVccInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number on which the Control Distribute VCC is set." ::= { mpLecServerConfigEntry 9 } mpLecSvCtrlDistributeVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI of the Control Distribute VCC." ::= { mpLecServerConfigEntry 10 } mpLecSvCtrlDistributeVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI of the Control Distribute VCC." ::= { mpLecServerConfigEntry 11 } mpLecSvCtrlDistributeSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the send traffic ID of the Control Distribute VCC." ::= { mpLecServerConfigEntry 12 } mpLecSvBusCallType OBJECT-TYPE SYNTAX INTEGER { dynamicSvc(1), pvc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of the connection between this LEC and the BUS. If it is set to '1', the type is SVC specified by the address resolution function. If it is set to '2' the type is PVC for VPI/VCI registration." ::= { mpLecServerConfigEntry 13 } mpLecSvMcastSendVccInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number on which the Multicast Send VCC is set." ::= { mpLecServerConfigEntry 14 } mpLecSvMcastSendVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI of the Multicast Send VCC." ::= { mpLecServerConfigEntry 15 } mpLecSvMcastSendVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI of the Multicast Send VCC." ::= { mpLecServerConfigEntry 16 } mpLecSvMcastSendSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the send traffic ID of the Multicast Send VCC." ::= { mpLecServerConfigEntry 17 } mpLecSvMcastForwardVccInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number on which the Multicast Forward VCC is set." ::= { mpLecServerConfigEntry 18 } mpLecSvMcastForwardVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI of the Multicast Forward VCC." ::= { mpLecServerConfigEntry 19 } mpLecSvMcastForwardVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI of the Multicast Forward VCC." ::= { mpLecServerConfigEntry 20 } mpLecSvMcastForwardSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the send traffic ID of the Multicast Forward VCC." ::= { mpLecServerConfigEntry 21 } mpLecSvCtrlDirectRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the shaper receive traffic ID of the Control Direct VCC." ::= { mpLecServerConfigEntry 22 } mpLecSvCtrlDistributeRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the receive traffic ID of the Control Distribute VCC." ::= { mpLecServerConfigEntry 23 } mpLecSvMcastSendRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the receive traffic ID of the Multicast Send VCC." ::= { mpLecServerConfigEntry 24 } mpLecSvMcastForwardRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the receive traffic ID of the Multicast Forward VCC." ::= { mpLecServerConfigEntry 25 } mpLeArpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLeArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the LE-ARP information." ::= { mpLec 4 } mpLeArpEntry OBJECT-TYPE SYNTAX MpLeArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of the LE-ARP information. The LE-ARP address information is registered by the following procedure ; 1) The NW manager creates LE-ARP table entry in mpLeArpTable, by setting 'createAndWait(5)' to LeArpRowStatus. 2) The NW manager sets the appropriate values to the objects contained in mpLeArpTable. 3) The NW manager activates the LE-ARP table entry, by setting 'active(1)' to LeArpRowStatus. The LE-ARP address information is deleted by the following procedure ; 1) The NW manager inactivates the LE-ARP table entry, by setting 'notInService(2)' to LeArpRowStatus. 2) The LE-ARP table entry is deleted, by setting 'destroy(6)' to LeArpRowStatus." INDEX { mpLeArpLecIndex, mpLeArpMacAddress } ::= { mpLeArpTable 1 } MpLeArpEntry ::= SEQUENCE { mpLeArpLecIndex INTEGER, mpLeArpMacAddress MacAddress, mpLeArpCallType INTEGER, mpLeArpInterface INTEGER, mpLeArpVpi INTEGER, mpLeArpVci INTEGER, mpLeArpSendTrafficId INTEGER, mpLeArpRcvTrafficId INTEGER } mpLeArpLecIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the 'lecIndex' of this client." ::= { mpLeArpEntry 1 } mpLeArpMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address for which this cache entry provides a translation." ::= { mpLeArpEntry 2 } mpLeArpCallType OBJECT-TYPE SYNTAX INTEGER { svc(1), pvc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the virtual circuit connection type of the LE-ARP entry. If it is set to '1', it is SVC connection. If it is set to '2', it is PVC connection. It is used to set the connection type when an entry is added to the object 'mpLeArpTable'." ::= { mpLeArpEntry 3 } mpLeArpInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the ATM interface number of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the ATM interface number which is used. In case of SVC connection, it is used to display the ATM interface number which is currently used, but it cannot be used to set." ::= { mpLeArpEntry 4 } mpLeArpVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VPI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VPI value which is used. In case of SVC connection, it is used to display the VPI value which is currently used, but it cannot be used to set." ::= { mpLeArpEntry 5 } mpLeArpVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the VCI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VCI value which is used. In case of SVC connection, it is used to display the VCI value which is currently used, but it cannot be used to set." ::= { mpLeArpEntry 6 } mpLeArpSendTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the send traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set." ::= { mpLeArpEntry 7 } mpLeArpRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the receive traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set." ::= { mpLeArpEntry 8 } mpLecStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLecStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the table of the LEC statistics information." ::= { mpLec 5 } mpLecStatisticsEntry OBJECT-TYPE SYNTAX MpLecStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the entry of statistics information counters." INDEX { mpLecStatIndex } ::= { mpLecStatisticsTable 1 } MpLecStatisticsEntry ::= SEQUENCE { mpLecStatIndex INTEGER, mpLecStatVcSetupSndCounts Counter, mpLecStatVcSetupRcvCounts Counter, mpLecStatVcReleaseSndCounts Counter, mpLecStatVcReleaseRcvCounts Counter, mpLecStatInContFrameFailures Counter, mpLecStatInDataFrameFailures Counter, mpLecStatInNarpRequests Counter, mpLecStatInTopologyRequests Counter, mpLecStatInBusUcastFrames Counter, mpLecStatInBusMcastFrames Counter, mpLecStatInBusBcastFrames Counter, mpLecStatOutContFrameFailures Counter, mpLecStatOutDataFrameFailures Counter, mpLecStatOutNarpRequests Counter, mpLecStatOutTopologyRequests Counter, mpLecStatOutBusUcastFrames Counter, mpLecStatOutBusMcastFrames Counter, mpLecStatOutBusBcastFrames Counter, mpLecStatEchoControlFrames Counter, mpLecStatInNoIDEntryDataFrames Counter, mpLecStatOutNoIDEntryDataFrames Counter, mpLecStatEchoControlFrames Counter, mpLecStatInNoIDEntryDataFrames Counter, mpLecStatOutNoIDEntryDataFrames Counter } mpLecStatIndex OBJECT-TYPE -- remove @003 SYNTAX INTEGER (1..2147483647) SYNTAX INTEGER -- add @003 ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the lecindex to identify the LEC which corresponds to this entry." ::= { mpLecStatisticsEntry 1 } mpLecStatVcSetupSndCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the call set-up done by the LAN Emulation function." ::= { mpLecStatisticsEntry 2 } mpLecStatVcSetupRcvCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the incoming call received by the LAN Emulation function." ::= { mpLecStatisticsEntry 3 } mpLecStatVcReleaseSndCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the call cleared by itself, by LAN Emulation function." ::= { mpLecStatisticsEntry 4 } mpLecStatVcReleaseRcvCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the call cleared by the destination entity, by LAN Emulation function." ::= { mpLecStatisticsEntry 5 } mpLecStatInContFrameFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the discarded control frames received." ::= { mpLecStatisticsEntry 6 } mpLecStatInDataFrameFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of discarded data frames received." ::= { mpLecStatisticsEntry 7 } mpLecStatInNarpRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the received LENARP REQUEST frames." ::= { mpLecStatisticsEntry 8 } mpLecStatInTopologyRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the received LE-TOPOLOGY-REQUEST frames." ::= { mpLecStatisticsEntry 9 } mpLecStatInBusUcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the unknown unicast frames received from the BUS." ::= { mpLecStatisticsEntry 10 } mpLecStatInBusMcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the multicast frames received from the BUS." ::= { mpLecStatisticsEntry 11 } mpLecStatInBusBcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the broadcast frames received from the BUS." ::= { mpLecStatisticsEntry 12 } mpLecStatOutContFrameFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the discarded control frames to be sent." ::= { mpLecStatisticsEntry 13 } mpLecStatOutDataFrameFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the discarded data frames to be sent." ::= { mpLecStatisticsEntry 14 } mpLecStatOutNarpRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the LE-N&RP- REQUEST frames sent." ::= { mpLecStatisticsEntry 15 } mpLecStatOutTopologyRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the LE TOPOLOGY@ REQUEST frames sent." ::= { mpLecStatisticsEntry 16 } mpLecStatOutBusUcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the unknown unicast frames sent to the BUS." ::= { mpLecStatisticsEntry 17 } mpLecStatOutBusMcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the multicast frames sent to the BUS." ::= { mpLecStatisticsEntry 18 } mpLecStatOutBusBcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the broadcast frames sent to the BUS." ::= { mpLecStatisticsEntry 19 } mpLecStatEchoControlFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of the echo frames of control frame. The echo frame is that Lec ID of received control frame is self Lec ID" ::= { mpLecStatisticsEntry 20 } mpLecStatInNoIDEntryDataFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of received data frames without being switched by IPFE." ::= { mpLecStatisticsEntry 21 } mpLecStatOutNoIDEntryDataFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of sent data frames without being switched by IPFE." ::= { mpLecStatisticsEntry 22 } mpLecElanTotalCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Emulated LAN (ELAN) currently configured." ::= { mpLec 6 } mpLecSysMaxVcConnect OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the number of the virtual circuits which are possible to be set simultaneously, used by LEC function. It is the total number of PVCs and SVCs which is possible to be set simultaneously." ::= { mpLec 7 } -- *************************************************************************** -- the SanFran MPC Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpMpcCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF MpMpcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the configuration table of the MPC information." ::= { mpMpc 1 } mpMpcCfgEntry OBJECT-TYPE SYNTAX MpMpcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the configuration entry of the MPC information." INDEX { mpMpcCfgIndex } ::= { mpMpcCfgTable 1 } MpMpcCfgEntry ::= SEQUENCE { mpMpcCfgIndex INTEGER, mpMpcOperatStatus INTEGER, -- @011 mpMpcTrafficId INTEGER, mpMpcSndTrafficId INTEGER, -- @011 add mpMpcRcvTrafficId INTEGER, -- @011 add mpMpcPrtNum INTEGER, mpMpcMaxMps INTEGER, mpMpcMaxCache INTEGER } mpMpcCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index of the MPC which corresponds to this entry." ::= { mpMpcCfgEntry 1 } mpMpcOperatStatus OBJECT-TYPE SYNTAX INTEGER -- @008 ACCESS read-write ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the operation status of MPC. It indicates whether MPC is actually active or not." ::= { mpMpcCfgEntry 2 } -- @001 mpMpcTrafficId OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION "Indicate the traffic ID which is specified when -- MPC connects VC." -- ::= { mpMpcCfgEntry 3 } -- @011 add from mpMpcSndTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the traffic ID which is specified when MPC connects VC." ::= { mpMpcCfgEntry 3 } mpMpcRcvTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the traffic ID which is specified when MPC connects VC." ::= { mpMpcCfgEntry 4 } -- @011 add end mpMpcPrtNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object assigns a number of ATM port which is used when the MPC is connected." ::= { mpMpcCfgEntry 5 } -- @011 mpMpcMaxMps OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the maximum number of MPSs which can be recognized by MPC. MPC is created so as to recognize MPS up to the value set by this object." ::= { mpMpcCfgEntry 6 } -- @011 mpMpcMaxCache OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the maximum number of cache entry which can be recognized by MPC. MPC is created so as to have cache up to the value set by this object. Both Ingress cache and Egress cache are set." ::= { mpMpcCfgEntry 7 } -- @011 mpMpcCacheCntTable OBJECT-TYPE SYNTAX SEQUENCE OF MpMpcCacheCntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the MPoA Client cache table which includes used number of MPC cache managed by agent." ::= { mpMpc 2 } mpMpcCacheCntEntry OBJECT-TYPE SYNTAX MpMpcCacheCntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the MPoA Client cache entry which includes used number of MPC cache managed by agent." INDEX { mpMpcCacheCntIndex } ::= { mpMpcCacheCntTable 1 } MpMpcCacheCntEntry ::= SEQUENCE { mpMpcCacheCntIndex INTEGER, mpMpcIngressCacheCnt INTEGER, mpMpcEgressCacheCnt INTEGER } mpMpcCacheCntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index of the MPC which corresponds to this entry." ::= { mpMpcCacheCntEntry 1 } mpMpcIngressCacheCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Ingress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache." ::= { mpMpcCacheCntEntry 2 } mpMpcEgressCacheCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Egress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache." ::= { mpMpcCacheCntEntry 3 } mpMpcMaxReqSelNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the number of SELs which can be used by all MPC managed by this agent and which are used for capsuling IP." ::= { mpMpc 3 } mpMpcUseSelNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of SELs which is being used by all MPC managed by this agent and which are used for capsuling IP." ::= { mpMpc 4 } -- *************************************************************************** -- the SanFran STP Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpStpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MpStpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information for the Spanning Tree Protocol." ::= { mpStp 1 } mpStpVlanEntry OBJECT-TYPE SYNTAX MpStpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information about the Spanning Tree Protocol." INDEX { mpStpVlanIndex } ::= { mpStpVlanTable 1 } MpStpVlanEntry ::= SEQUENCE { mpStpVlanIndex INTEGER, mpStpVlanProtocolSpecification INTEGER, mpStpVlanPriority INTEGER, mpStpVlanTimeSinceTopologyChange TimeTicks, mpStpVlanTopChanges Counter, mpStpVlanDesignatedRoot BridgeId, mpStpVlanRootCost INTEGER, mpStpVlanRootPort INTEGER, mpStpVlanMaxAge Timeout, mpStpVlanHelloTime Timeout, mpStpVlanHoldTime INTEGER, mpStpVlanForwardDelay Timeout, mpStpVlanBridgeMaxAge Timeout, mpStpVlanBridgeHelloTime Timeout, mpStpVlanBridgeForwardDelay Timeout, mpStpVlanSupportStatus INTEGER } mpStpVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the index value to identify this table entry." ::= { mpStpVlanEntry 1 } mpStpVlanProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined." ::= { mpStpVlanEntry 2 } mpStpVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7" ::= { mpStpVlanEntry 3 } mpStpVlanTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { mpStpVlanEntry 4 } mpStpVlanTopChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { mpStpVlanEntry 5 } mpStpVlanDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { mpStpVlanEntry 6 } mpStpVlanRootCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the root as seen from this bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2" ::= { mpStpVlanEntry 7 } mpStpVlanRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3" ::= { mpStpVlanEntry 8 } mpStpVlanMaxAge OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4" ::= { mpStpVlanEntry 9 } mpStpVlanHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { mpStpVlanEntry 10 } mpStpVlanHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14" ::= { mpStpVlanEntry 11 } mpStpVlanForwardDelay OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mpStpVlanBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { mpStpVlanEntry 12 } mpStpVlanBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" ::= { mpStpVlanEntry 13 } mpStpVlanBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9" ::= { mpStpVlanEntry 14 } mpStpVlanBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { mpStpVlanEntry 15 } mpStpVlanSupportStatus OBJECT-TYPE SYNTAX INTEGER { support(1), nonSupport(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether the VLAN supports Spanning Tree Protocol or not. If the value 'support(1)' is set, the VLAN supports Spanning Tree Protocol. If the value 'nonSupport(2)' is set, the VLAN does not support Spanning Tree Protocol." ::= { mpStpVlanEntry 16 } -- The Spanning Tree Port Table mpStpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MpStpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains port-specific information for the Spanning Tree Protocol." ::= { mpStp 2 } mpStpPortEntry OBJECT-TYPE SYNTAX MpStpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information maintained by every port about the Spanning Tree Protocol state for that port." INDEX { mpStpPortVlanIndex, mpStpPort } ::= { mpStpPortTable 1 } MpStpPortEntry ::= SEQUENCE { mpStpPortVlanIndex INTEGER, mpStpPort INTEGER, mpStpPortPriority INTEGER, mpStpPortState INTEGER, mpStpPortEnable INTEGER, mpStpPortPathCost INTEGER, mpStpPortDesignatedRoot BridgeId, mpStpPortDesignatedCost INTEGER, mpStpPortDesignatedBridge BridgeId, mpStpPortDesignatedPort OCTET STRING, mpStpPortForwardTransitions Counter } mpStpPortVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN ID for which this entry contains Spanning Tree Protocol management information." ::= { mpStpPortEntry 1 } mpStpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2" ::= { mpStpPortEntry 2 } mpStpPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mpStpPort." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1" ::= { mpStpPortEntry 3 } mpStpPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mpStpPortEnable), this object will have a value of disabled(1)." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { mpStpPortEntry 4 } mpStpPortEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The enabled/disabled status of the port." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { mpStpPortEntry 5 } mpStpPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3" ::= { mpStpPortEntry 6 } mpStpPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.4" ::= { mpStpPortEntry 7 } mpStpPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.5" ::= { mpStpPortEntry 8 } mpStpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.6" ::= { mpStpPortEntry 9 } mpStpPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.7" ::= { mpStpPortEntry 10 } mpStpPortForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { mpStpPortEntry 11 } -- *************************************************************************** -- the SanFran LLC Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. -- @011 add from mpLlcSharedVccMaxSduSize OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Maximum SDU size for common VCC which is managed by LLC. LLC make a common VCC according to Maximum SDU size set by this MIB object." ::= { mpLlc 1 } mpLlcAgeOutTime OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates no communication time which is used to judge age out on LLC/SNAP capsulation VCC aging. The VCC is released when no communication time of sending/receiving data reach this value." ::= { mpLlc 2 } -- @011 delete end -- @009 add from mpLlcPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF MpLlcPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table contains information of a PVC." ::= { mpLlc 3 } -- @011 mpLlcPvcEntry OBJECT-TYPE SYNTAX MpLlcPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry indicates a member of PVC information on a ATM interface." INDEX { mpLlcPvcIdIndex } ::= { mpLlcPvcTable 1 } MpLlcPvcEntry ::= SEQUENCE { mpLlcPvcIdIndex INTEGER, mpLlcPvcPort INTEGER, mpLlcPvcVpi INTEGER, mpLlcPvcVci INTEGER, mpLlcPvcSdu INTEGER, mpLlcPvcVcPriority INTEGER, -- add @010 mpLlcPvcForwardTrafficId INTEGER, mpLlcPvcBackwardTrafficId INTEGER, mpLlcPvcAdminStatus INTEGER, mpLlcPvcOperStatus INTEGER, mpLlcPvcRowStatus RowStatus } mpLlcPvcIdIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is an index of PVC entry table. The index indicates the Virtual Circuit Identifier (VC ID)." ::= { mpLlcPvcEntry 1 } mpLlcPvcPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies an ATM port number." ::= { mpLlcPvcEntry 2 } mpLlcPvcVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies a VPI." ::= { mpLlcPvcEntry 3 } mpLlcPvcVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The vaule of this object identifies a VCI." ::= { mpLlcPvcEntry 4 } mpLlcPvcSdu OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies a Service Data Unit." DEFVAL { 9188 } ::= { mpLlcPvcEntry 5 } -- @010 add from mpLlcPvcVcPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates a priority on a specified VC when VC is not one in a PVC." ::= { mpLlcPvcEntry 6 } -- @010 add end mpLlcPvcForwardTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies a traffic-id for outgoing at a specified ATM port." DEFVAL { 1 } ::= { mpLlcPvcEntry 7 } -- @010 mpLlcPvcBackwardTrafficId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The vaule of this object identifies a traffic-id for incoming at a specified ATM port." DEFVAL { 1 } ::= { mpLlcPvcEntry 8 } -- @010 mpLlcPvcAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates status of a VC." ::= { mpLlcPvcEntry 9 } -- @010 mpLlcPvcOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates the current operational status of a VC." ::= { mpLlcPvcEntry 10 } -- @010 mpLlcPvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete or modify a row in this table." ::= { mpLlcPvcEntry 11 } -- @010 -- @009 add to -- @008 add from -- *************************************************************************** -- the SanFran OSPF Group -- *************************************************************************** -- Implementation of this group is mandatory for all the SanFran systems. mpOspfGeneral OBJECT IDENTIFIER ::= { mpOspf 1 } mpOspfVersionNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current version number of the OSPF proto- col is 2." ::= { mpOspfGeneral 1 } mpOspfTOSSupport OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "The router's support for type-of-service rout- ing." ::= { mpOspfGeneral 2 } mpOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)." ::= { mpOspfGeneral 3 } mpOspfExitOverflowInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted." ::= { mpOspfGeneral 4 } mpOspfInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received error packets." ::= { mpOspfGeneral 5 } mpOspfInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received error packets." ::= { mpOspfGeneral 6 } mpOspfGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfGlobalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of the router's OSPF process." ::= { mpOspf 2 } mpOspfGlobalEntry OBJECT-TYPE SYNTAX MpOspfGlobalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of the router's OSPF process." INDEX { mpOspfGlobalProcessId } ::= { mpOspfGlobalTable 1 } MpOspfGlobalEntry ::= SEQUENCE { mpOspfGlobalProcessId INTEGER, mpOspfGlobalMode INTEGER, mpOspfGlobalRouterId IpAddress, mpOspfGlobalAreaBdrRtrStatus TruthValue, mpOspfGlobalASBdrRtrStatus TruthValue, mpOspfGlobalRFC1583Compatibility INTEGER, mpOspfGlobalDefaultRouteType INTEGER, mpOspfGlobalDefMetric INTEGER, mpOspfGlobalDefExternalType INTEGER, mpOspfGlobalDefAddress IpAddress, mpOspfGlobalDefTag INTEGER, mpOspfGlobalDefProtocol INTEGER, mpOspfGlobalDefImportList INTEGER, mpOspfGlobalIntraAreaRoutePriority INTEGER, mpOspfGlobalInterAreaRoutePriority INTEGER, mpOspfGlobalExternalRoutePriority INTEGER, mpOspfGlobalMulticastExtensions INTEGER, mpOspfGlobalDemandExtensions TruthValue, mpOspfGlobalRouterLsaCount Gauge, mpOspfGlobalNetworkLsaCount Gauge, mpOspfGlobalSummaryNetworkLsaCount Gauge, mpOspfGlobalSummaryRouterLsaCount Gauge, mpOspfGlobalExternalLsaCount Gauge, mpOspfGlobalExternalLsaCksumSum Gauge, mpOspfGlobalReceives Counter, mpOspfGlobalReceiveBadAuths Counter, mpOspfGlobalReceiveBadPackets Counter, mpOspfGlobalMulticastSends Counter, mpOspfGlobalUnicastSends Counter, mpOspfGlobalSpfRuns Counter, mpOspfGlobalIncSummaryUpdates Counter, mpOspfGlobalIncExternalUpdates Counter, mpOspfGlobalLsAgeOutCounts Counter, mpOspfGlobalLsFlushCounts Counter, mpOspfGlobalLsdbAllocs Counter, mpOspfGlobalLsdbFrees Counter, mpOspfGlobalBufferAllocFailures Counter } mpOspfGlobalProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfGlobalEntry 1 } mpOspfGlobalMode OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), change(3), cancel(4), active(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of OSPF process." ::= { mpOspfGlobalEntry 2 } mpOspfGlobalRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses." ::= { mpOspfGlobalEntry 3 } mpOspfGlobalAreaBdrRtrStatus OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A flag to note whether this router is an area border router." ::= { mpOspfGlobalEntry 4 } mpOspfGlobalASBdrRtrStatus OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether this router is config- ured as an Autonomous System border router." ::= { mpOspfGlobalEntry 5 } mpOspfGlobalRFC1583Compatibility OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the whether calculation of AS external route is done with RFC1583 mode or RFC2328 mode." ::= { mpOspfGlobalEntry 6 } mpOspfGlobalDefaultRouteType OBJECT-TYPE SYNTAX INTEGER { no(1), always(2), import-list(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indeicates the timing to advertise default route." ::= { mpOspfGlobalEntry 7 } mpOspfGlobalDefMetric OBJECT-TYPE SYNTAX INTEGER(1..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The external cost of default route to be used when the advertising timing of default route is 'always'." ::= { mpOspfGlobalEntry 8 } mpOspfGlobalDefExternalType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The external type of default route to be used when the advertising timing of default route is 'always'." ::= { mpOspfGlobalEntry 9 } mpOspfGlobalDefAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The forwarding address of default route to be used when the advertising timing of default route is 'always'." ::= { mpOspfGlobalEntry 10 } mpOspfGlobalDefTag OBJECT-TYPE SYNTAX INTEGER(0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The route tag of default route to be used when the advertising timing of default route is 'always'." ::= { mpOspfGlobalEntry 11 } mpOspfGlobalDefProtocol OBJECT-TYPE SYNTAX INTEGER { local(2), static(3), rip(8) } ACCESS read-write STATUS mandatory DESCRIPTION "The routing protocol of routing table which judges the condition of import-list When the advertising timing of default route is 'import-list'." ::= { mpOspfGlobalEntry 12 } mpOspfGlobalDefImportList OBJECT-TYPE SYNTAX INTEGER(1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The import-list number which judges the condition of import-list When the advertising timing of default route is 'import-list'." ::= { mpOspfGlobalEntry 13 } mpOspfGlobalIntraAreaRoutePriority OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority which is used when intra-area route is made in IP routing table." ::= { mpOspfGlobalEntry 14 } mpOspfGlobalInterAreaRoutePriority OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority which is used when inter-area route is made in IP routing table." ::= { mpOspfGlobalEntry 15 } mpOspfGlobalExternalRoutePriority OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority which is used when AS external route is made in IP routing table." ::= { mpOspfGlobalEntry 16 } mpOspfGlobalMulticastExtensions OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-write STATUS mandatory DESCRIPTION "A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled." -- fixed to 0 ::= { mpOspfGlobalEntry 17 } mpOspfGlobalDemandExtensions OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The router's support for demand routing." -- fixed to false ::= { mpOspfGlobalEntry 18 } mpOspfGlobalRouterLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Router (LS type 1) link-state advertisements in the link-state database." ::= { mpOspfGlobalEntry 19 } mpOspfGlobalNetworkLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Network (LS type 2) link-state advertisements in the link-state database." ::= { mpOspfGlobalEntry 20 } mpOspfGlobalSummaryNetworkLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Summary Network (LS type 3) link-state advertisements in the link-state database." ::= { mpOspfGlobalEntry 21 } mpOspfGlobalSummaryRouterLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Summary Router (LS type 4) link-state advertisements in the link-state database." ::= { mpOspfGlobalEntry 22 } mpOspfGlobalExternalLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of external (LS type 5) link-state advertisements in the link-state database." ::= { mpOspfGlobalEntry 23 } mpOspfGlobalExternalLsaCksumSum OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers." ::= { mpOspfGlobalEntry 24 } mpOspfGlobalReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets." ::= { mpOspfGlobalEntry 25 } mpOspfGlobalReceiveBadAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets which were discarded for authentication error." ::= { mpOspfGlobalEntry 26 } mpOspfGlobalReceiveBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets which were discarded except authentication error." ::= { mpOspfGlobalEntry 27 } mpOspfGlobalMulticastSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast sent packets." ::= { mpOspfGlobalEntry 28 } mpOspfGlobalUnicastSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unicast sent packets." ::= { mpOspfGlobalEntry 29 } mpOspfGlobalSpfRuns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times of the calculation for shortest path tree." ::= { mpOspfGlobalEntry 30 } mpOspfGlobalIncSummaryUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of summary incremental updates." ::= { mpOspfGlobalEntry 31 } mpOspfGlobalIncExternalUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of external incremental updates." ::= { mpOspfGlobalEntry 32 } mpOspfGlobalLsAgeOutCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LSAs which were reached max age." ::= { mpOspfGlobalEntry 33 } mpOspfGlobalLsFlushCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LSAs which max age were set up and which was removed forcibly." ::= { mpOspfGlobalEntry 34 } mpOspfGlobalLsdbAllocs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LSAs which were allocated." ::= { mpOspfGlobalEntry 35 } mpOspfGlobalLsdbFrees OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LSAs which were released." ::= { mpOspfGlobalEntry 36 } mpOspfGlobalBufferAllocFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that it failed to hunt the buffer for the packet transmission." ::= { mpOspfGlobalEntry 37 } mpOspfImportListTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table to import routing information from other routing protocol to the OSPF process." ::= { mpOspf 3 } mpOspfImportListEntry OBJECT-TYPE SYNTAX MpOspfImportListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry to import routing information from other routing protocol to the OSPF process." INDEX { mpOspfImportListProcessId, mpOspfImportListProtocol, mpOspfImportListNumber } ::= { mpOspfImportListTable 1 } MpOspfImportListEntry ::= SEQUENCE { mpOspfImportListProcessId INTEGER, mpOspfImportListProtocol INTEGER, mpOspfImportListNumber INTEGER, mpOspfImportListStatus RowStatus } mpOspfImportListProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfImportListEntry 1 } mpOspfImportListProtocol OBJECT-TYPE SYNTAX INTEGER { local(2), static(3), rip(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol of IP routing table." ::= { mpOspfImportListEntry 2 } mpOspfImportListNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The import list number." ::= { mpOspfImportListEntry 3 } mpOspfImportListStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfImportListEntry 4 } mpOspfNetworkPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfNetworkPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table to specify route priority for each network at making IP routing table." ::= { mpOspf 4 } mpOspfNetworkPriorityEntry OBJECT-TYPE SYNTAX MpOspfNetworkPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry to specify route priority for each network at making IP routing table." INDEX { mpOspfNetworkPriorityProcessID, mpOspfNetworkPriorityAddress, mpOspfNetworkPriorityMask } ::= { mpOspfNetworkPriorityTable 1 } MpOspfNetworkPriorityEntry ::= SEQUENCE { mpOspfNetworkPriorityProcessID INTEGER, mpOspfNetworkPriorityAddress IpAddress, mpOspfNetworkPriorityMask IpAddress, mpOspfNetworkPriorityValue INTEGER, mpOspfNetworkPriorityStatus RowStatus } mpOspfNetworkPriorityProcessID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfNetworkPriorityEntry 1 } mpOspfNetworkPriorityAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address." ::= { mpOspfNetworkPriorityEntry 2 } mpOspfNetworkPriorityMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network mask." ::= { mpOspfNetworkPriorityEntry 3 } mpOspfNetworkPriorityValue OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The route priority." ::= { mpOspfNetworkPriorityEntry 4 } mpOspfNetworkPriorityStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfNetworkPriorityEntry 5 } mpOspfAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of the router's attached areas." ::= { mpOspf 5 } mpOspfAreaEntry OBJECT-TYPE SYNTAX MpOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas." INDEX { mpOspfAreaProcessId, mpOspfAreaId } ::= { mpOspfAreaTable 1 } MpOspfAreaEntry ::= SEQUENCE { mpOspfAreaProcessId INTEGER, mpOspfAreaId IpAddress, mpOspfAreaImportAsExternal INTEGER, mpOspfAreaStubMetric INTEGER, mpOspfAreaSummary INTEGER, mpOspfAreaConfigIfCount Gauge, mpOspfAreaActiveIfCount Gauge, mpOspfAreaTransitCapability TruthValue, mpOspfAreaTransitNetCount Gauge, mpOspfAreaRtrCount Gauge, mpOspfAreaBdrRtrCount Gauge, mpOspfAreaAsBdrRtrCount Gauge, mpOspfAreaLsaCount Gauge, mpOspfAreaLsaCksumSum Gauge, mpOspfAreaStatus RowStatus } mpOspfAreaProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfAreaEntry 1 } mpOspfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone." ::= { mpOspfAreaEntry 2 } mpOspfAreaImportAsExternal OBJECT-TYPE SYNTAX INTEGER { importExternal (1), importNoExternal (2), importNssa (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The area's support for importing AS external link- state advertisements." ::= { mpOspfAreaEntry 3 } mpOspfAreaStubMetric OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The metric to be set up to default route which advertises to stub area." ::= { mpOspfAreaEntry 4 } mpOspfAreaSummary OBJECT-TYPE SYNTAX INTEGER { noAreaSummary (1), sendAreaSummary (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs." ::= { mpOspfAreaEntry 5 } mpOspfAreaConfigIfCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of the registered interfaces." ::= { mpOspfAreaEntry 6 } mpOspfAreaActiveIfCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of the interface during operation." ::= { mpOspfAreaEntry 7 } mpOspfAreaTransitCapability OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether it is the area which active virtual link exists in." ::= { mpOspfAreaEntry 8 } mpOspfAreaTransitNetCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of reachable transit networks. " ::= { mpOspfAreaEntry 9 } mpOspfAreaRtrCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of reachable routers." ::= { mpOspfAreaEntry 10 } mpOspfAreaBdrRtrCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass." ::= { mpOspfAreaEntry 11 } mpOspfAreaAsBdrRtrCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass." ::= { mpOspfAreaEntry 12 } mpOspfAreaLsaCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's." ::= { mpOspfAreaEntry 13 } mpOspfAreaLsaCksumSum OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers." ::= { mpOspfAreaEntry 14 } mpOspfAreaStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfAreaEntry 15 } mpOspfLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Process's Link State Database." ::= { mpOspf 6 } mpOspfLsdbEntry OBJECT-TYPE SYNTAX MpOspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single Link State Advertisement." INDEX { mpOspfLsdbProcessId, mpOspfLsdbAreaId, mpOspfLsdbType, mpOspfLsdbLsid, mpOspfLsdbRouterId } ::= { mpOspfLsdbTable 1 } MpOspfLsdbEntry ::= SEQUENCE { mpOspfLsdbProcessId INTEGER, mpOspfLsdbAreaId IpAddress, mpOspfLsdbType INTEGER, mpOspfLsdbLsid IpAddress, mpOspfLsdbRouterId IpAddress, mpOspfLsdbSequence INTEGER, mpOspfLsdbAge INTEGER, mpOspfLsdbChecksum INTEGER, mpOspfLsdbAdvertisement OCTET STRING } mpOspfLsdbProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfLsdbEntry 1 } mpOspfLsdbAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." ::= { mpOspfLsdbEntry 2 } mpOspfLsdbType OBJECT-TYPE SYNTAX INTEGER { routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), -- but see ospfExtLsdbTable multicastLink (6), nssaExternalLink (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." ::= { mpOspfLsdbEntry 3 } mpOspfLsdbLsid OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." ::= { mpOspfLsdbEntry 4 } mpOspfLsdbRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." ::= { mpOspfLsdbEntry 5 } mpOspfLsdbSequence OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." ::= { mpOspfLsdbEntry 6 } mpOspfLsdbAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the age of the link state adver- tisement in seconds." ::= { mpOspfLsdbEntry 7 } mpOspfLsdbChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." ::= { mpOspfLsdbEntry 8 } mpOspfLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire Link State Advertisement, including its header." ::= { mpOspfLsdbEntry 9 } mpOspfAreaRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfAreaRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255" ::= { mpOspf 7 } mpOspfAreaRangeEntry OBJECT-TYPE SYNTAX MpOspfAreaRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255" INDEX { mpOspfAreaRangeProcessId, mpOspfAreaRangeAreaId, mpOspfAreaRangeNet, mpOspfAreaRangeMask } ::= { mpOspfAreaRangeTable 1 } MpOspfAreaRangeEntry ::= SEQUENCE { mpOspfAreaRangeProcessId INTEGER, mpOspfAreaRangeAreaId IpAddress, mpOspfAreaRangeNet IpAddress, mpOspfAreaRangeMask IpAddress, mpOspfAreaRangeEffect INTEGER, mpOspfAreaRangeStatus RowStatus } mpOspfAreaRangeProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfAreaRangeEntry 1 } mpOspfAreaRangeAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Area the Address Range is to be found within." ::= { mpOspfAreaRangeEntry 2 } mpOspfAreaRangeNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Net or Subnet indicated by the range." ::= { mpOspfAreaRangeEntry 3 } mpOspfAreaRangeMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." ::= { mpOspfAreaRangeEntry 4 } mpOspfAreaRangeEffect OBJECT-TYPE SYNTAX INTEGER { advertiseMatching (1), doNotAdvertiseMatching (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Subnets subsumed by ranges either trigger the advertisement of the indicated summary (adver- tiseMatching), or result in the subnet's not being advertised at all outside the area." ::= { mpOspfAreaRangeEntry 5 } mpOspfAreaRangeStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfAreaRangeEntry 6 } mpOspfHostTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of Hosts, and their metrics, that the router will advertise as host routes." ::= { mpOspf 8 } mpOspfHostEntry OBJECT-TYPE SYNTAX MpOspfHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A metric to be advertised, for a given type of service, when a given host is reachable." INDEX { mpOspfHostProcessId, mpOspfHostIpAddress } ::= { mpOspfHostTable 1 } MpOspfHostEntry ::= SEQUENCE { mpOspfHostProcessId INTEGER, mpOspfHostIpAddress IpAddress, mpOspfHostMetric INTEGER, mpOspfHostStatus RowStatus } mpOspfHostProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfHostEntry 1 } mpOspfHostIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Host." ::= { mpOspfHostEntry 2 } mpOspfHostMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Metric to be advertised." ::= { mpOspfHostEntry 3 } mpOspfHostStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfHostEntry 4 } mpOspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF." ::= { mpOspf 9 } mpOspfIfEntry OBJECT-TYPE SYNTAX MpOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF." INDEX { mpOspfIfProcessId, mpOspfIfIndex } ::= { mpOspfIfTable 1 } MpOspfIfEntry ::= SEQUENCE { mpOspfIfProcessId INTEGER, mpOspfIfIndex INTEGER, mpOspfIfIpAddress IpAddress, mpOspfIfIpMask IpAddress, mpOspfIfAreaId IpAddress, mpOspfIfType INTEGER, mpOspfIfMetric INTEGER, mpOspfIfRtrPriority INTEGER, mpOspfIfTransitDelay INTEGER, mpOspfIfRetransInterval INTEGER, mpOspfIfHelloInterval INTEGER, mpOspfIfRtrDeadInterval INTEGER, mpOspfIfPollInterval INTEGER, mpOspfIfState INTEGER, mpOspfIfDesignatedRouter IpAddress, mpOspfIfBackupDesignatedRouter IpAddress, mpOspfIfAuthType INTEGER, mpOspfIfAuthKeyId INTEGER, mpOspfIfAuthKey OCTET STRING, mpOspfIfMulticastForwarding INTEGER, mpOspfIfDemand TruthValue, mpOspfIfEvents Counter, mpOspfIfNeighbors Gauge, mpOspfIfAdjacencies Gauge, mpOspfIfFullyAdjacencies Gauge, mpOspfIfLsUpdateFloods Counter, mpOspfIfDelayedAckSends Counter, mpOspfIfStatus RowStatus } mpOspfIfProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfIfEntry 1 } mpOspfIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies ifIndex of interface." ::= { mpOspfIfEntry 2 } mpOspfIfIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of this OSPF interface." ::= { mpOspfIfEntry 3 } mpOspfIfIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network mask registered in interface." ::= { mpOspfIfEntry 4 } mpOspfIfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone." ::= { mpOspfIfEntry 5 } mpOspfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3), pointToMultipoint (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'." ::= { mpOspfIfEntry 6 } mpOspfIfMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The metric of this interface." ::= { mpOspfIfEntry 7 } mpOspfIfRtrPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker." ::= { mpOspfIfEntry 8 } mpOspfIfTransitDelay OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link state update packet over this interface." ::= { mpOspfIfEntry 9 } mpOspfIfRetransInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets." ::= { mpOspfIfEntry 10 } mpOspfIfHelloInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network." ::= { mpOspfIfEntry 11 } mpOspfIfRtrDeadInterval OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network." ::= { mpOspfIfEntry 12 } mpOspfIfPollInterval OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor." ::= { mpOspfIfEntry 13 } mpOspfIfState OBJECT-TYPE SYNTAX INTEGER { down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The OSPF Interface State." ::= { mpOspfIfEntry 14 } mpOspfIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Designated Router." ::= { mpOspfIfEntry 15 } mpOspfIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Backup Designated Router." ::= { mpOspfIfEntry 16 } mpOspfIfAuthType OBJECT-TYPE SYNTAX INTEGER -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for an in- terface. Additional authentication types may be assigned locally." ::= { mpOspfIfEntry 17 } mpOspfIfAuthKeyId OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object." ::= { mpOspfIfEntry 18 } mpOspfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero." ::= { mpOspfIfEntry 19 } mpOspfIfMulticastForwarding OBJECT-TYPE SYNTAX INTEGER { blocked (1), -- no multicast forwarding multicast (2), -- using multicast address unicast (3) -- to each OSPF neighbor } ACCESS read-write STATUS mandatory DESCRIPTION "The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding." ::= { mpOspfIfEntry 20 } mpOspfIfDemand OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface." ::= { mpOspfIfEntry 21 } mpOspfIfEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this OSPF interface has changed its state, or an error has occurred." ::= { mpOspfIfEntry 22 } mpOspfIfNeighbors OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Neighbors." ::= { mpOspfIfEntry 23 } mpOspfIfAdjacencies OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of adjacent Neighbors." ::= { mpOspfIfEntry 24 } mpOspfIfFullyAdjacencies OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of fully adjacent Neighbors." ::= { mpOspfIfEntry 25 } mpOspfIfLsUpdateFloods OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LS-update floods." ::= { mpOspfIfEntry 26 } mpOspfIfDelayedAckSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LS-Ack floods." ::= { mpOspfIfEntry 27 } mpOspfIfStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfIfEntry 28 } mpOspfVirtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about this router's virtual inter- faces." ::= { mpOspf 10 } mpOspfVirtIfEntry OBJECT-TYPE SYNTAX MpOspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single Virtual Interface." INDEX { mpOspfVirtIfProcessId, mpOspfVirtIfId } ::= { mpOspfVirtIfTable 1 } MpOspfVirtIfEntry ::= SEQUENCE { mpOspfVirtIfProcessId INTEGER, mpOspfVirtIfId INTEGER, mpOspfVirtIfNeighbor IpAddress, mpOspfVirtIfAreaId IpAddress, mpOspfVirtIfMetric INTEGER, mpOspfVirtIfTransitDelay INTEGER, mpOspfVirtIfRetransInterval INTEGER, mpOspfVirtIfHelloInterval INTEGER, mpOspfVirtIfRtrDeadInterval INTEGER, mpOspfVirtIfState INTEGER, mpOspfVirtIfAuthType INTEGER, mpOspfVirtIfAuthKeyId INTEGER, mpOspfVirtIfAuthKey OCTET STRING, mpOspfVirtIfEvents Counter, mpOspfVirtIfNeighbors Gauge, mpOspfVirtIfAdjacencies Gauge, mpOspfVirtIfFullyAdjacencies Gauge, mpOspfVirtIfLsUpdateFloods Counter, mpOspfVirtIfDelayedAckSends Counter, mpOspfVirtIfStatus RowStatus } mpOspfVirtIfProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfVirtIfEntry 1 } mpOspfVirtIfId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identification which is used to distinguish virtual link." ::= { mpOspfVirtIfEntry 2 } mpOspfVirtIfNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Router ID of the Virtual Neighbor." ::= { mpOspfVirtIfEntry 3 } mpOspfVirtIfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0" ::= { mpOspfVirtIfEntry 4 } mpOspfVirtIfMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The metric until end point router." ::= { mpOspfVirtIfEntry 5 } mpOspfVirtIfTransitDelay OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link- state update packet over this interface." ::= { mpOspfVirtIfEntry 6 } mpOspfVirtIfRetransInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time." ::= { mpOspfVirtIfEntry 7 } mpOspfVirtIfHelloInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor." ::= { mpOspfVirtIfEntry 8 } mpOspfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor." ::= { mpOspfVirtIfEntry 9 } mpOspfVirtIfState OBJECT-TYPE SYNTAX INTEGER { down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable } ACCESS read-only STATUS mandatory DESCRIPTION "OSPF virtual interface states." ::= { mpOspfVirtIfEntry 10 } mpOspfVirtIfAuthType OBJECT-TYPE SYNTAX INTEGER (0..255) -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally." ::= { mpOspfVirtIfEntry 11 } mpOspfVirtIfAuthKeyId OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object." ::= { mpOspfVirtIfEntry 12 } mpOspfVirtIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) ACCESS read-write STATUS mandatory DESCRIPTION "If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. If Authentication Type is md5, the device will left adjust and zero fill to 16 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. When read, mpOspfVirtIfAuthKey always returns a string of length zero." ::= { mpOspfVirtIfEntry 13 } mpOspfVirtIfEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of state changes or error events on this Virtual Link." ::= { mpOspfVirtIfEntry 14 } mpOspfVirtIfNeighbors OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of neighbors." ::= { mpOspfVirtIfEntry 15 } mpOspfVirtIfAdjacencies OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of adjacent neighbors." ::= { mpOspfVirtIfEntry 16 } mpOspfVirtIfFullyAdjacencies OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of fully adjacent neighbors." ::= { mpOspfVirtIfEntry 17 } mpOspfVirtIfLsUpdateFloods OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LS-update floods." ::= { mpOspfVirtIfEntry 18 } mpOspfVirtIfDelayedAckSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LS-Ack floods." ::= { mpOspfVirtIfEntry 19 } mpOspfVirtIfStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfVirtIfEntry 20 } mpOspfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of non-virtual neighbor information." ::= { mpOspf 11 } mpOspfNbrEntry OBJECT-TYPE SYNTAX MpOspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single neighbor." INDEX { mpOspfNbrProcessId, mpOspfNbrIfIndex, mpOspfNbrIpAddress } ::= { mpOspfNbrTable 1 } MpOspfNbrEntry ::= SEQUENCE { mpOspfNbrProcessId INTEGER, mpOspfNbrIfIndex INTEGER, mpOspfNbrIpAddress IpAddress, mpOspfNbrRtrId IpAddress, mpOspfNbrOptions INTEGER, mpOspfNbrPriority INTEGER, mpOspfNbrCost INTEGER, mpOspfNbrState INTEGER, mpOspfNbrPermanence INTEGER, mpOspfNbrHelloSuppressed TruthValue, mpOspfNbrSelectedDr IpAddress, mpOspfNbrSelectedBdr IpAddress, mpOspfNbrLsSummaryListLen Gauge, mpOspfNbrLsRetransQLen Gauge, mpOspfNbrLsReqListLen Gauge, mpOspfNbrLsUpdateRetrans Counter, mpOspfNbrDirectAckSends Counter, mpOspfNbrDupUpdateReceives Counter, mpOspfNbrOldUpdateReceives Counter, mpOspfNbrDupAckReceives Counter, mpOspfNbrLosses Counter, mpOspfNbrAdjacencyResets Counter, mpOspfNbrStatus RowStatus } mpOspfNbrProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfNbrEntry 1 } mpOspfNbrIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of interface related to the neighbior." ::= { mpOspfNbrEntry 2 } mpOspfNbrIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces." ::= { mpOspfNbrEntry 3 } mpOspfNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System." ::= { mpOspfNbrEntry 4 } mpOspfNbrOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders." ::= { mpOspfNbrEntry 5 } mpOspfNbrPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network." ::= { mpOspfNbrEntry 6 } mpOspfNbrCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The metric to the neighbor which is used for Point-to-MultiPoint network." ::= { mpOspfNbrEntry 7 } mpOspfNbrState OBJECT-TYPE SYNTAX INTEGER { down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The State of the relationship with this Neighbor." ::= { mpOspfNbrEntry 8 } mpOspfNbrPermanence OBJECT-TYPE SYNTAX INTEGER { dynamic (1), -- learned through protocol permanent (2) -- configured address } ACCESS read-only STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known." ::= { mpOspfNbrEntry 9 } mpOspfNbrHelloSuppressed OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Hellos are being suppressed to the neighbor." ::= { mpOspfNbrEntry 10 } mpOspfNbrSelectedDr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The designated router which neighbor selects." ::= { mpOspfNbrEntry 11 } mpOspfNbrSelectedBdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The backup designated router which neighbor selects." ::= { mpOspfNbrEntry 12 } mpOspfNbrLsSummaryListLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the LS-summary queue." ::= { mpOspfNbrEntry 13 } mpOspfNbrLsRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the retransmission queue." ::= { mpOspfNbrEntry 14 } mpOspfNbrLsReqListLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the LS-request queue." ::= { mpOspfNbrEntry 15 } mpOspfNbrLsUpdateRetrans OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times of LS-update re-transmission." ::= { mpOspfNbrEntry 16 } mpOspfNbrDirectAckSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times of LS-Ack Unicast transmission." ::= { mpOspfNbrEntry 17 } mpOspfNbrDupUpdateReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that overlapped LSA was received." ::= { mpOspfNbrEntry 18 } mpOspfNbrOldUpdateReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that old LSA was received." ::= { mpOspfNbrEntry 19 } mpOspfNbrDupAckReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that overlapped LS-Ack was received." ::= { mpOspfNbrEntry 20 } mpOspfNbrLosses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that Neighbor down was recognized." ::= { mpOspfNbrEntry 21 } mpOspfNbrAdjacencyResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that Adjacency was reset." ::= { mpOspfNbrEntry 22 } mpOspfNbrStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { mpOspfNbrEntry 23 } mpOspfVirtNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of virtual neighbor information." ::= { mpOspf 12 } mpOspfVirtNbrEntry OBJECT-TYPE SYNTAX MpOspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Virtual neighbor information." INDEX { mpOspfVirtNbrProcessId, mpOspfVirtNbrIfId } ::= { mpOspfVirtNbrTable 1 } MpOspfVirtNbrEntry ::= SEQUENCE { mpOspfVirtNbrProcessId INTEGER, mpOspfVirtNbrIfId INTEGER, mpOspfVirtNbrAreaId IpAddress, mpOspfVirtNbrRtrId IpAddress, mpOspfVirtNbrIpAddress IpAddress, mpOspfVirtNbrOptions INTEGER, mpOspfVirtNbrState INTEGER, mpOspfVirtNbrHelloSuppressed TruthValue, mpOspfVirtNbrLsSummaryListLen Gauge, mpOspfVirtNbrLsRetransQLen Gauge, mpOspfVirtNbrLsReqListLen Gauge, mpOspfVirtNbrLsUpdateRetrans Counter, mpOspfVirtNbrDirectAckSends Counter, mpOspfVirtNbrDupUpdateReceives Counter, mpOspfVirtNbrOldUpdateReceives Counter, mpOspfVirtNbrDupAckReceives Counter, mpOspfVirtNbrLosses Counter, mpOspfVirtNbrAdjacencyResets Counter } mpOspfVirtNbrProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfVirtNbrEntry 1 } mpOspfVirtNbrIfId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of Interface which transmits packet to Neighbor." ::= { mpOspfVirtNbrEntry 2 } mpOspfVirtNbrAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Transit Area Identifier." ::= { mpOspfVirtNbrEntry 3 } mpOspfVirtNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the neighboring router in the Autonomous System." ::= { mpOspfVirtNbrEntry 4 } mpOspfVirtNbrIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address this Virtual Neighbor is us- ing." ::= { mpOspfVirtNbrEntry 5 } mpOspfVirtNbrOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing." ::= { mpOspfVirtNbrEntry 6 } mpOspfVirtNbrState OBJECT-TYPE SYNTAX INTEGER { down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the Virtual Neighbor Relation- ship." ::= { mpOspfVirtNbrEntry 7 } mpOspfVirtNbrHelloSuppressed OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Hellos are being suppressed to the neighbor" ::= { mpOspfVirtNbrEntry 8 } mpOspfVirtNbrLsSummaryListLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the LS-summary queue." ::= { mpOspfVirtNbrEntry 9 } mpOspfVirtNbrLsRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the retransmission queue." ::= { mpOspfVirtNbrEntry 10 } mpOspfVirtNbrLsReqListLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the LS-request queue." ::= { mpOspfVirtNbrEntry 11 } mpOspfVirtNbrLsUpdateRetrans OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times of LS-update re-transmission." ::= { mpOspfVirtNbrEntry 12 } mpOspfVirtNbrDirectAckSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times of LS-Ack unicast transmission." ::= { mpOspfVirtNbrEntry 13 } mpOspfVirtNbrDupUpdateReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that overlapped LSA was received." ::= { mpOspfVirtNbrEntry 14 } mpOspfVirtNbrOldUpdateReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that old LSA was received." ::= { mpOspfVirtNbrEntry 15 } mpOspfVirtNbrDupAckReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that overlapped LS-Ack was received." ::= { mpOspfVirtNbrEntry 16 } mpOspfVirtNbrLosses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that Neighbor down was recognized." ::= { mpOspfVirtNbrEntry 17 } mpOspfVirtNbrAdjacencyResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that Adjacency was reset." ::= { mpOspfVirtNbrEntry 18 } mpOspfExtLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MpOspfExtLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Process's Links State Database." ::= { mpOspf 13 } mpOspfExtLsdbEntry OBJECT-TYPE SYNTAX MpOspfExtLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single Link State Advertisement." INDEX { mpOspfExtLsdbProcessId, mpOspfExtLsdbLsid, mpOspfExtLsdbRouterId } ::= { mpOspfExtLsdbTable 1 } MpOspfExtLsdbEntry ::= SEQUENCE { mpOspfExtLsdbProcessId INTEGER, mpOspfExtLsdbLsid IpAddress, mpOspfExtLsdbRouterId IpAddress, mpOspfExtLsdbType INTEGER, mpOspfExtLsdbSequence INTEGER, mpOspfExtLsdbAge INTEGER, mpOspfExtLsdbChecksum INTEGER, mpOspfExtLsdbAdvertisement OCTET STRING } mpOspfExtLsdbProcessId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The process ID of OSPF." ::= { mpOspfExtLsdbEntry 1 } mpOspfExtLsdbLsid OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." ::= { mpOspfExtLsdbEntry 2 } mpOspfExtLsdbRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." ::= { mpOspfExtLsdbEntry 3 } mpOspfExtLsdbType OBJECT-TYPE SYNTAX INTEGER { asExternalLink (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." ::= { mpOspfExtLsdbEntry 4 } mpOspfExtLsdbSequence OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." ::= { mpOspfExtLsdbEntry 5 } mpOspfExtLsdbAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the age of the link state adver- tisement in seconds." ::= { mpOspfExtLsdbEntry 6 } mpOspfExtLsdbChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." ::= { mpOspfExtLsdbEntry 7 } mpOspfExtLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE(36)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire Link State Advertisement, including its header." ::= { mpOspfExtLsdbEntry 8 } -- @008 add end -- ******************************************************************* -- Traps used by SanFran. This will be added as soon as new trap MIB -- objects comes out. -- ******************************************************************* -- @001 -- specific-trapの値は、上位3桁（機能ブロック単位の値）に変更する。 11/19 YI -- 下位4桁（TRAPコード値）をシステム仕様書通り修正する。 -- 4桁目を発生・復旧に振り分ける。0=発生 1=復旧 -- 11/30/98 Trap：temperatureFault 〜 returnedToOldFiles まで、上書き -- ******************************************************************* -- System Manager Traps used by ATM-SW. -- ******************************************************************* -- @002 -- VARIABLES変更 -- FAN障害発生 fanUnitFault TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysFanType } DESCRIPTION "This trap is issued when a fan is failured." -- ファン障害発生を通知する。 ::= 170001 -- FAN障害復旧 fanUnitFaultRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysFanType } DESCRIPTION "This trap is issured when a fan is recovered." -- ファン障害復旧を通知する。 ::= 171001 -- 温度障害発生 temperatureFault TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysTempType } DESCRIPTION "This trap is issured when a temperature become abnormal." -- 温度障害発生を通知する。 ::= 170002 -- 温度障害復旧 temperatureFaultRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysTempType } DESCRIPTION "This trap is issured when a temperature is recovered." -- 温度障害復旧を通知する。 ::= 171002 -- 電圧障害発生 voltageFault TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysVoltageType } DESCRIPTION "This trap is issued when a voltage is failured." -- 電圧障害発生を通知する。 ::= 170003 -- 電圧障害復旧 voltageFaultRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysVoltageType } DESCRIPTION "This trap is issued when a voltage is recovered." -- 電圧障害復旧を通知する。 ::= 171003 -- 外部装置障害 exEquipmentFault TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysEqpType } DESCRIPTION "This trap is issued when a equipment is failured." -- 外部装置障害発生を通知する。 ::= 170004 exEquipmentFaultRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription, mpSysEqpType } DESCRIPTION "This trap is issued when a equipment is recovered." -- 外部装置障害復旧を通知する。 ::= 171004 -- COM-COM間BUSパリティエラー発生 combusParityError TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a COM-COM bus parity error is occurred." -- COM-COM間のバスパリティエラー発生を通知する。 ::= 170005 -- COM-COM間BUSパリティエラー復旧 combusParityErrorRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a COM-COM bus parity error is recovered." -- COM-COM間のバスパリティエラー復旧を通知する。 ::= 171005 -- COM-COM間BUSレディアラームエラー発生 combusReadyAlmError TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a COM-COM bus ready alarm error is occurred." -- COM-COM間のバスレディアラームエラー発生を通知する。 ::= 170006 -- COM-COM間BUSレディアラームエラー復旧 combusReadyAlmErrorRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a COM-COM bus ready alarm error is recovered." -- COM-COM間のバスレディアラームエラー復旧を通知する。 ::= 171006 -- Stby COM-Bridge間PCI SERR発生 combrgPciSerrFault TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a Stby COM-Bridge pci serr is occurred." -- スタンバイCOM-Bridge間のPCI Serr発生を通知する。 ::= 170007 -- Stby COM-Bridge間PCI SERR復旧 combrgPciSerrFaultRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when a Stby COM-Bridge pci serr is recoverd." -- スタンバイCOM-Bridge間のPCI Serr復旧を通知する。 ::= 171007 -- Version値書込みNG @007 versionWriteNg TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when failured to write version at file." -- バージョンのファイルへの書込み失敗を通知する。 ::= 170008 -- Version値書込み復旧 @007 versionWriteNgRecover TRAP-TYPE ENTERPRISE { mmn9110 } VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "This trap is issued when recover from failure status to write version at file." -- バージョンのファイルへの書込み失敗状態からの復旧を通知する。 ::= 171008 -- ******************************************************************* -- CLI Traps used by ATM-SW. -- ******************************************************************* supervisorLogin TRAP-TYPE ENTERPRISE mmn9110 VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "Supervisor logs in the system." ::= 1280001 supervisorExit TRAP-TYPE ENTERPRISE mmn9110 VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "Supervisor exits from the system." ::= 1281001 supervisorLoginFailure TRAP-TYPE ENTERPRISE mmn9110 VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "Supervisor login failure from the system." ::= 1280002 -- ******************************************************************* -- File Manager Traps used by ATM-SW. -- ******************************************************************* returnedToOldFiles TRAP-TYPE ENTERPRISE mmn9110 VARIABLES { mpEventTimeStamp, mpEventSeverity, mpEventDescription } DESCRIPTION "Returned to the previous system files." ::= 200001 END