LUM-SOAM-PM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI -- RFC 2578 TruthValue, MacAddress, DateAndTime, RowStatus, TimeInterval, DisplayString FROM SNMPv2-TC -- RFC 2579 OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB IEEE8021PriorityValue FROM IEEE8021-TC-MIB -- IEEE 802.1ap MefSoamTcSessionType, MefSoamTcStatusType FROM MEF-SOAM-TC-MIB lumModules, lumSoamPmMIB FROM LUM-REG MgmtNameString, SubrackNumber, SlotNumber, FaultStatus, Unsigned32WithNA, BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus, CommandString FROM LUM-TC; lumSoamPmMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring (SOAM-PM). " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default value notPresent for operStatus." REVISION "201501140000Z" -- Jan 14th 2015 DESCRIPTION "Updated for revision R25: -Added emxp240iie" REVISION "201405160000Z" -- May 16th 2014 DESCRIPTION "Updated for revision R23." ::= { lumModules 60 } -- ---------------------------------------------------- -- Compliance area, containing groups and compliance -- specifications. -- ---------------------------------------------------- lumSoamPmConfs OBJECT IDENTIFIER ::= { lumSoamPmMIB 1 } -- ***************************************************************************** -- SOAM-PM MIB Module - Conformance Information -- ***************************************************************************** lumSoamPmGroups OBJECT IDENTIFIER ::= { lumSoamPmConfs 1 } lumSoamPmCompliances OBJECT IDENTIFIER ::= { lumSoamPmConfs 2 } -- ***************************************************************************** -- Object definitions in the SOAM PM MIB Module -- ***************************************************************************** lumSoamPmMIBObjects OBJECT IDENTIFIER ::= { lumSoamPmMIB 2 } -- ***************************************************************************** -- Groups in the SOAM PM MIB Module -- ***************************************************************************** soamPmGeneral OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 1 } soamPmLmObjects OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 2 } soamPmDmObjects OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 3 } -- -------------------------------------------------- -- General group -- -------------------------------------------------- soamPmGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { soamPmGeneral 1 } soamPmGeneralLmStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { soamPmGeneral 2 } soamPmGeneralLmObjectsTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of ethernet service OAM LM objects table " ::= { soamPmGeneral 3 } soamPmGeneralDmObjectsTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of ethernet service OAM DM objects table " ::= { soamPmGeneral 4 } -- *************************************************************************** -- Ethernet Loss Measurement Configuration Table -- *************************************************************************** soamPmLmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SoamPmLmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes configuration objects and operations for the Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM]. Each row in the table represents a Loss Measurement session for the defined remote MEP." REFERENCE "[MEF SOAM-PM] R68; [Y.1731]" ::= { soamPmLmObjects 1 } soamPmLmCfgEntry OBJECT-TYPE SYNTAX SoamPmLmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of soamPmLmCfgTable. " INDEX { soamPmLmCfgIndex } ::= { soamPmLmCfgTable 1 } SoamPmLmCfgEntry ::= SEQUENCE { soamPmLmCfgIndex Unsigned32, soamPmLmCfgName MgmtNameString, soamPmLmCfgDescr DisplayString, soamPmLmCfgSubrack SubrackNumber, soamPmLmCfgSlot SlotNumber, soamPmLmCfgEnabled TruthValue, soamPmLmCfgMessagePeriod INTEGER, soamPmLmCfgDestMacAddress MacAddress, soamPmLmCfgMepName DisplayString, soamPmLmCfgMaidIdentifier DisplayString, soamPmLmCfgDestMepId Dot1agCfmMepIdOrZero, soamPmLmCfgDestIsMepId TruthValue, soamPmLmCfgInternalReference Unsigned32, soamPmLmCfgLocalDeviceType INTEGER, soamPmLmCfgType INTEGER, soamPmLmCfgPriority IEEE8021PriorityValue, soamPmLmCfgAvailabilityFlrThreshold Unsigned32, soamPmLmCfgAvailabilityUasAlarmThreshold Unsigned32, soamPmLmCfgSessionType MefSoamTcSessionType, soamPmLmCfgSessionStatus MefSoamTcStatusType, soamPmLmCfgCosAwareness INTEGER, soamPmLmCfgRowStatus RowStatus, soamPmLmCfgAdminStatus BoardOrInterfaceAdminStatus, soamPmLmCfgOperStatus BoardOrInterfaceOperStatus, soamPmLmCfgStats CommandString } soamPmLmCfgIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. The index is not persistent and may be reused between restarts. " ::= { soamPmLmCfgEntry 1 } soamPmLmCfgName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the LM session. The name has the same structure as the name of the remote mep. LM:megname:slot:subrack:mepid: The priority is not used for NID. " ::= { soamPmLmCfgEntry 2 } soamPmLmCfgDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label for the LM session. " DEFVAL { "" } ::= { soamPmLmCfgEntry 3 } soamPmLmCfgSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The number of the subrack where this OAM object is defined " ::= { soamPmLmCfgEntry 4 } soamPmLmCfgSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The slot where this OAM Object is defined. " ::= { soamPmLmCfgEntry 5 } soamPmLmCfgEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether the Loss Measurement session is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. " REFERENCE "[MEF SOAM-PM] R4, R5, R6, O1, R12, R14" DEFVAL { true } ::= { soamPmLmCfgEntry 6 } soamPmLmCfgMessagePeriod OBJECT-TYPE SYNTAX INTEGER { interval100ms (0), interval1s (1), interval10s (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R76, R77, D29, D30" DEFVAL { interval1s } ::= { soamPmLmCfgEntry 7 } soamPmLmCfgDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target or Destination MAC Address Field to be transmitted. This address will be used if the value of the object soamPmLmDestIsMepId is 'false'. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R70, R104" ::= { soamPmLmCfgEntry 8 } soamPmLmCfgMepName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the MEP this LM session belongs to. Persistent cross-reference to MEP table. " ::= { soamPmLmCfgEntry 9 } soamPmLmCfgMaidIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "A unique user definied identifier for the MEG. " DEFVAL { "" } ::= { soamPmLmCfgEntry 10 } soamPmLmCfgDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmDestIsMepId is 'true'. A value of zero means that the destination MEP ID has not been configured. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R70, R104" DEFVAL { 0 } ::= { soamPmLmCfgEntry 11 } soamPmLmCfgDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP is used for SOAM LM frame transmission. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R70, R104" DEFVAL { true } ::= { soamPmLmCfgEntry 12 } soamPmLmCfgInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= {soamPmLmCfgEntry 13 } soamPmLmCfgLocalDeviceType OBJECT-TYPE SYNTAX INTEGER { emxp (1), nidGe (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of device the LM is created and associated. " DEFVAL { emxp } ::= { soamPmLmCfgEntry 14 } soamPmLmCfgType OBJECT-TYPE SYNTAX INTEGER { lmLmm (1), lmSlm (2), lmCcm (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU generated and received SLR responses tracked lmCcm(3) CCM SOAM PDU generated and received CCM PDUs tracked The lmSlm value is required. The lmLmm and lmCcm values are optional. The lmCcm loss measurement values are only valid for a point-to-point MEG. Multipoint MEGs may give unreliable loss measurements. Only lmLmm is supported. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[Y.1731] [MEF SOAM-PM] R51, R68, O7, R102" DEFVAL { lmLmm } ::= { soamPmLmCfgEntry 15 } soamPmLmCfgPriority OBJECT-TYPE SYNTAX IEEE8021PriorityValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. If the session attibute soamPmLmCfgCosAwareness is 'priorityAware' then only frames of the same Class of Service are counted. If the Session is 'priorityBlind' then all frames for all Class of Service combined are counted. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R1, R2, R71, D28, R72, R73, R105-R109, D45; [MEF 10.2.1] Section 6.8" DEFVAL { 0 } ::= { soamPmLmCfgEntry 16 } soamPmLmCfgAvailabilityFlrThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availability threshold range of 0.000 through 100.000 is supported. This parameter is equivalent to the Availability parameter of 'C' as specified by MEF 10.2.1. For SNMP, units are in millipercent (percent with 3 decimals). This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R81, R82, D34" DEFVAL { 1 } ::= { soamPmLmCfgEntry 17 } soamPmLmCfgAvailabilityUasAlarmThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies the configurable number of seconds the session shall be determined to be unavailable before raising an alarm. " DEFVAL { 5 } ::= { soamPmLmCfgEntry 18 } soamPmLmCfgSessionType OBJECT-TYPE SYNTAX MefSoamTcSessionType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onDemand' indicates the current session is 'On-Demand'. Only Proactive sessions are supported. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R3" DEFVAL { proactive } ::= { soamPmLmCfgEntry 19 } soamPmLmCfgSessionStatus OBJECT-TYPE SYNTAX MefSoamTcStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between the start time and the stop time, and soamPmLmCfgEnabled is true. A value of 'notActive' indicates the current LM session is not active, i.e. it has not started yet, has stopped upon reaching the stop time, or is disabled. " ::= { soamPmLmCfgEntry 20 } soamPmLmCfgCosAwareness OBJECT-TYPE SYNTAX INTEGER { priorityBlind (1), priorityAware (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Define CoS awareness for the LM initiator. A CoS aware LM Initiater will send counters associated with the priority of the sent LMM packets. priorityBlind - LM Initiator is Cos unaware (counters for all priorities are aggregated.) priorityAware - LM Responder is CoS aware (use counters associated with the priority of sent LMM packet). " DEFVAL { priorityBlind } ::= { soamPmLmCfgEntry 21 } soamPmLmCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. This attribute can be written via SNMP. " ::= { soamPmLmCfgEntry 22 } soamPmLmCfgAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for an LM Session. down - The LM session should be inactive. service - The LM session is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The session should be activated when it becomes available. Alarms are not suppressed. notApplicable - used to tell that attribute is not used in current configuration. " DEFVAL { up } ::= { soamPmLmCfgEntry 23 } soamPmLmCfgOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition to the 'up' state. up - The object is active. " DEFVAL { notPresent } ::= { soamPmLmCfgEntry 24 } soamPmLmCfgStats OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "View current statistics for the LM session. " ::= { soamPmLmCfgEntry 25 } -- ************************************************************************** -- Ethernet Loss Measurement Current Statistic Table -- ************************************************************************** soamPmLmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SoamPmLmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the results for the current Measurement Interval in a SOAM Loss Measurement session gathered during the interval indicated by soamPmLmCfgMeasurementInterval. A row in this table is created automatically by the SNMP Agent when the Loss Measurement session is configured." REFERENCE "[MEF SOAM-PM] R7, R15, D9, D18" ::= { soamPmLmObjects 2 } soamPmLmStatsEntry OBJECT-TYPE SYNTAX SoamPmLmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of soamPmLmStatsTable " INDEX { soamPmLmStatsIndex } ::= { soamPmLmStatsTable 1 } SoamPmLmStatsEntry ::= SEQUENCE { soamPmLmStatsIndex Unsigned32, soamPmLmStatsLocalDeviceType INTEGER, soamPmLmStatsName MgmtNameString, soamPmLmStatsSubrack SubrackNumber, soamPmLmStatsSlot SlotNumber, soamPmLmStatsMaidIdentifier DisplayString, soamPmLmStatsDestMepId Dot1agCfmMepIdOrZero, soamPmLmStatsInternalReference Unsigned32, soamPmLmStatsMepName DisplayString, soamPmLmStatsSuspect15Min TruthValue, soamPmLmStatsSuspectPrevious15Min TruthValue, soamPmLmStatsSuspect24H TruthValue, soamPmLmStatsReset15Min INTEGER, soamPmLmStatsReset24H INTEGER, soamPmLmStatsStartTime15Min DateAndTime, soamPmLmStatsElapsedTime15Min TimeInterval, soamPmLmStatsForwardTransmittedFrames15Min Counter64, soamPmLmStatsForwardReceivedFrames15Min Counter64, soamPmLmStatsForwardMinFlr15Min Unsigned32WithNA, soamPmLmStatsForwardMaxFlr15Min Unsigned32, soamPmLmStatsForwardAvgFlr15Min Unsigned32, soamPmLmStatsForwardHighLoss15Min Unsigned32, soamPmLmStatsBackwardTransmittedFrames15Min Counter64, soamPmLmStatsBackwardReceivedFrames15Min Counter64, soamPmLmStatsBackwardMinFlr15Min Unsigned32WithNA, soamPmLmStatsBackwardMaxFlr15Min Unsigned32, soamPmLmStatsBackwardAvgFlr15Min Unsigned32, soamPmLmStatsBackwardHighLoss15Min Unsigned32, soamPmLmStatsUnavailableSeconds15Min Unsigned32, soamPmLmStatsStartTimePrevious15Min DateAndTime, soamPmLmStatsElapsedTimePrevious15Min TimeInterval, soamPmLmStatsForwardTransmittedFramesPrevious15Min Counter64, soamPmLmStatsForwardReceivedFramesPrevious15Min Counter64, soamPmLmStatsForwardMinFlrPrevious15Min Unsigned32WithNA, soamPmLmStatsForwardMaxFlrPrevious15Min Unsigned32, soamPmLmStatsForwardAvgFlrPrevious15Min Unsigned32, soamPmLmStatsForwardHighLossPrevious15Min Unsigned32, soamPmLmStatsBackwardTransmittedFramesPrevious15Min Counter64, soamPmLmStatsBackwardReceivedFramesPrevious15Min Counter64, soamPmLmStatsBackwardMinFlrPrevious15Min Unsigned32WithNA, soamPmLmStatsBackwardMaxFlrPrevious15Min Unsigned32, soamPmLmStatsBackwardAvgFlrPrevious15Min Unsigned32, soamPmLmStatsBackwardHighLossPrevious15Min Unsigned32, soamPmLmStatsStartTime24H DateAndTime, soamPmLmStatsElapsedTime24H TimeInterval, soamPmLmStatsForwardTransmittedFrames24H Counter64, soamPmLmStatsForwardReceivedFrames24H Counter64, soamPmLmStatsForwardMinFlr24H Unsigned32WithNA, soamPmLmStatsForwardMaxFlr24H Unsigned32, soamPmLmStatsForwardAvgFlr24H Unsigned32, soamPmLmStatsForwardHighLoss24H Unsigned32, soamPmLmStatsBackwardTransmittedFrames24H Counter64, soamPmLmStatsBackwardReceivedFrames24H Counter64, soamPmLmStatsBackwardMinFlr24H Unsigned32WithNA, soamPmLmStatsBackwardMaxFlr24H Unsigned32, soamPmLmStatsBackwardAvgFlr24H Unsigned32, soamPmLmStatsBackwardHighLoss24H Unsigned32, soamPmLmStatsUas FaultStatus, soamPmLmStatsPriority IEEE8021PriorityValue } soamPmLmStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the current Measurement Interval for this PM session. The index is the same as for the configuration, i.e soamPmLmCfgIndex and is not persistent and may be reused between restarts. " ::= { soamPmLmStatsEntry 1 } soamPmLmStatsLocalDeviceType OBJECT-TYPE SYNTAX INTEGER { emxp (1), nidGe (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of device the LM is created and associated. " DEFVAL { emxp } ::= { soamPmLmStatsEntry 2 } soamPmLmStatsName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the LM session, same as the name of remote MEP that this LM session is associated with. " ::= { soamPmLmStatsEntry 3 } soamPmLmStatsSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where this OAM object is defined " ::= { soamPmLmStatsEntry 4 } soamPmLmStatsSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The slot where this OAM Object is defined. " ::= { soamPmLmStatsEntry 5 } soamPmLmStatsMaidIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique user definied identifier for the MEG. " DEFVAL { "" } ::= { soamPmLmStatsEntry 6 } soamPmLmStatsDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmDestIsMepId is 'true'. A value of zero means that the destination MEP ID has not been configured. This object is only valid for the entity transmitting the Loss Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for the 'lmCcm' type. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R70, R104" DEFVAL { 0 } ::= { soamPmLmStatsEntry 7 } soamPmLmStatsInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= { soamPmLmStatsEntry 8 } soamPmLmStatsMepName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the MEP this LM session belongs to. Persistent cross-reference to MEP table. " ::= { soamPmLmStatsEntry 9 } soamPmLmStatsSuspect15Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmLmStatsEntry 10 } soamPmLmStatsSuspectPrevious15Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmLmStatsEntry 11 } soamPmLmStatsSuspect24H OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmLmStatsEntry 12 } soamPmLmStatsReset15Min OBJECT-TYPE SYNTAX INTEGER { normal (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the 15 minute counters for the LM session. After a successful reset the default value (normal) is restored in this action attribute. " DEFVAL { normal } ::= { soamPmLmStatsEntry 13 } soamPmLmStatsReset24H OBJECT-TYPE SYNTAX INTEGER { normal (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the 24 hour counters for the LM session. After a successful reset the default value (normal) is restored in this action attribute. " DEFVAL { normal } ::= { soamPmLmStatsEntry 14 } soamPmLmStatsStartTime15Min OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R87, R112" ::= { soamPmLmStatsEntry 15 } soamPmLmStatsElapsedTime15Min OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R87, R112" ::= { soamPmLmStatsEntry 16 } soamPmLmStatsForwardTransmittedFrames15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 17 } soamPmLmStatsForwardReceivedFrames15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of types lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 18 } soamPmLmStatsForwardMinFlr15Min OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 19 } soamPmLmStatsForwardMaxFlr15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 20 } soamPmLmStatsForwardAvgFlr15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 21 } soamPmLmStatsForwardHighLoss15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 22 } soamPmLmStatsBackwardTransmittedFrames15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 23 } soamPmLmStatsBackwardReceivedFrames15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 24 } soamPmLmStatsBackwardMinFlr15Min OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 25 } soamPmLmStatsBackwardMaxFlr15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 26 } soamPmLmStatsBackwardAvgFlr15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 27 } soamPmLmStatsBackwardHighLoss15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 28 } soamPmLmStatsUnavailableSeconds15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number if seconds the service has been been unavailable during the 15 min interval. The service has been unavailable when the FLR threshold is exceeded in either the forward or backward direction. " ::= { soamPmLmStatsEntry 29 } soamPmLmStatsStartTimePrevious15Min OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R87, R112" ::= { soamPmLmStatsEntry 30 } soamPmLmStatsElapsedTimePrevious15Min OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R87, R112" ::= { soamPmLmStatsEntry 31 } soamPmLmStatsForwardTransmittedFramesPrevious15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 32 } soamPmLmStatsForwardReceivedFramesPrevious15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of types lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 33 } soamPmLmStatsForwardMinFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 34 } soamPmLmStatsForwardMaxFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 35 } soamPmLmStatsForwardAvgFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 36 } soamPmLmStatsForwardHighLossPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 37 } soamPmLmStatsBackwardTransmittedFramesPrevious15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 38 } soamPmLmStatsBackwardReceivedFramesPrevious15Min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 39 } soamPmLmStatsBackwardMinFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 40 } soamPmLmStatsBackwardMaxFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 41 } soamPmLmStatsBackwardAvgFlrPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 42 } soamPmLmStatsBackwardHighLossPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 43 } soamPmLmStatsStartTime24H OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R87, R112" ::= { soamPmLmStatsEntry 44 } soamPmLmStatsElapsedTime24H OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R87, R112" ::= { soamPmLmStatsEntry 45 } soamPmLmStatsForwardTransmittedFrames24H OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 46 } soamPmLmStatsForwardReceivedFrames24H OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of types lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 47 } soamPmLmStatsForwardMinFlr24H OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 48 } soamPmLmStatsForwardMaxFlr24H OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 49 } soamPmLmStatsForwardAvgFlr24H OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 50 } soamPmLmStatsForwardHighLoss24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 51 } soamPmLmStatsBackwardTransmittedFrames24H OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 52 } soamPmLmStatsBackwardReceivedFrames24H OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level only. For a PM Session of type lmSlm this includes the count of SOAM ETH-SLM frames only. " REFERENCE "[MEF SOAM-PM] R69, R87, R112" ::= { soamPmLmStatsEntry 53 } soamPmLmStatsBackwardMinFlr24H OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" DEFVAL { 4294967294 } ::= { soamPmLmStatsEntry 54 } soamPmLmStatsBackwardMaxFlr24H OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 55 } soamPmLmStatsBackwardAvgFlr24H OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 through 100.000. Precision is in millipercent " REFERENCE "[MEF SOAM-PM] D37" ::= { soamPmLmStatsEntry 56 } soamPmLmStatsBackwardHighLoss24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in MEF 10.2.1. " REFERENCE "[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87" ::= { soamPmLmStatsEntry 57 } soamPmLmStatsUas OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Unavailable seconds (UAS) 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start of a new 15 minute period the associated UAS counter is reset to zero, by definition. At the same time the fault status is cleared. " ::= { soamPmLmStatsEntry 58 } soamPmLmStatsPriority OBJECT-TYPE SYNTAX IEEE8021PriorityValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Class of Service are counted. The default value is to be the value which yields the lowest frame loss. This object is not applicable if soamPmLmCfgType is set to lmCcm. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R1, R2, R71, D28, R72, R73, R105-R109, D45; [MEF 10.2.1] Section 6.8" DEFVAL { 0 } ::= { soamPmLmStatsEntry 59 } -- ************************************************************************** -- Ethernet Delay Measurement Configuration Table -- ************************************************************************** soamPmDmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SoamPmDmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes configuration objects and operations for the Delay Measurement function. Each row in the table represents a Delay Measurement session for the defined remote MEP." REFERENCE "[MEF SOAM-PM] R50; [Y.1731]" ::= { soamPmDmObjects 1 } soamPmDmCfgEntry OBJECT-TYPE SYNTAX SoamPmDmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of soamPmDmCfgTable. " INDEX { soamPmDmCfgIndex } ::= { soamPmDmCfgTable 1 } SoamPmDmCfgEntry ::= SEQUENCE { soamPmDmCfgIndex Unsigned32, soamPmDmCfgName MgmtNameString, soamPmDmCfgDescr DisplayString, soamPmDmCfgSubrack SubrackNumber, soamPmDmCfgSlot SlotNumber, soamPmDmCfgInternalReference Unsigned32, soamPmDmCfgLocalDeviceType INTEGER, soamPmDmCfgDropEligible TruthValue, soamPmDmCfgType INTEGER, soamPmDmCfgEnabled TruthValue, soamPmDmCfgMessagePeriod INTEGER, soamPmDmCfgPriority IEEE8021PriorityValue, soamPmDmCfgDestMacAddress MacAddress, soamPmDmCfgMepName DisplayString, soamPmDmCfgMaidIdentifier DisplayString, soamPmDmCfgDestMepId Dot1agCfmMepIdOrZero, soamPmDmCfgDestIsMepId TruthValue, soamPmDmCfgSessionType MefSoamTcSessionType, soamPmDmCfgSessionStatus MefSoamTcStatusType, soamPmDmCfgRowStatus RowStatus, soamPmDmCfgAdminStatus BoardOrInterfaceAdminStatus, soamPmDmCfgOperStatus BoardOrInterfaceOperStatus, soamPmDmCfgStats CommandString} soamPmDmCfgIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "An index to the Delay Measurement Configuration table which indicates the specific measurement session for the MEP. The index is not persistent and may be reused between restarts. " ::= { soamPmDmCfgEntry 1 } soamPmDmCfgName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DM session. The name has the same structure as the name of the remote mep. DM:megname:slot:subrack:mepid: The priority is not used for NID. " ::= { soamPmDmCfgEntry 2 } soamPmDmCfgDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label for the DM session. " DEFVAL { "" } ::= { soamPmDmCfgEntry 3 } soamPmDmCfgSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The number of the subrack where this OAM object is defined " ::= { soamPmDmCfgEntry 4 } soamPmDmCfgSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The slot where this OAM Object is defined. " ::= { soamPmDmCfgEntry 5 } soamPmDmCfgInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= {soamPmDmCfgEntry 6 } soamPmDmCfgLocalDeviceType OBJECT-TYPE SYNTAX INTEGER { emxp (1), nidGe (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of device the DM is created and associated. " DEFVAL { emxp } ::= { soamPmDmCfgEntry 7 } soamPmDmCfgDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the drop eligibility of a specific OAM frame. Frames with ETH-DM information are always marked as drop ineligible. " REFERENCE "[MEF SOAM-PM] R4, R5, R6, O1, R12, R14" DEFVAL { false } ::= { soamPmDmCfgEntry 8 } soamPmDmCfgType OBJECT-TYPE SYNTAX INTEGER { dmDmm (1), dm1DmTx (2), dm1DmRx (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates what type of Delay Measurement is to be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (one-way or two-way measurements) dm1DmTx(2) 1DM SOAM PDU generated (one-way measurements are made by the receiver) dm1DmRx(3) 1DM SOAM PDU received and tracked (one-way measurements) The exact PDUs to use are specified by this object in combination with soamPmDmCfgVersion. The value dmDMM is required. The values dm1DmTx and dm1DmRx are optional. Only mmDmm is supported. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R52, R53, R54, O5, R88" DEFVAL { dmDmm } ::= { soamPmDmCfgEntry 9 } soamPmDmCfgEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether the Delay Measurement session is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. " REFERENCE "[MEF SOAM-PM] R4, R5, R6, O1, R12, R14" DEFVAL { true } ::= { soamPmDmCfgEntry 10 } soamPmDmCfgMessagePeriod OBJECT-TYPE SYNTAX INTEGER { interval100ms (0), interval1s (1), interval10s (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the interval between Delay Measurement OAM message transmission. For Delay Measurement monitoring applications, the default value is 100ms s. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R61, R62, D22, R95, R96, D39" DEFVAL { interval100ms } ::= { soamPmDmCfgEntry 11 } soamPmDmCfgPriority OBJECT-TYPE SYNTAX IEEE8021PriorityValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority of frames with Delay Measurement OAM message information. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R1, R2, R56, D21, R57, R58, R90-R94, D28; [MEF 10.2.1] Section 6.8" DEFVAL { 0 } ::= { soamPmDmCfgEntry 12 } soamPmDmCfgDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target or Destination MAC Address Field to be transmitted. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R55, R89" ::= { soamPmDmCfgEntry 13 } soamPmDmCfgMepName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the MEP this DM session belongs to. Persistent cross-reference to MEP table. " ::= { soamPmDmCfgEntry 14 } soamPmDmCfgMaidIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "A unique user definied identifier for the MEG. " DEFVAL { "" } ::= { soamPmDmCfgEntry 15 } soamPmDmCfgDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will be used if the value of the column soamPmDmDestIsMepId is 'true'. A value of zero means that the destination MEP ID has not been configured. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R55, R89" DEFVAL { 0 } ::= { soamPmDmCfgEntry 16 } soamPmDmCfgDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A value of 'true' indicates that MEPID of the target MEP is used for SOAM DM frame transmission. A value of 'false' indicates that the destination MAC address of the target MEP is used for SOAM DM frame transmission. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R55, R89" DEFVAL { true } ::= { soamPmDmCfgEntry 17 } soamPmDmCfgSessionType OBJECT-TYPE SYNTAX MefSoamTcSessionType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onDemand' indicates the current session is 'On-Demand'. Only Proactive is supported. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R3" DEFVAL { proactive } ::= { soamPmDmCfgEntry 18 } soamPmDmCfgSessionStatus OBJECT-TYPE SYNTAX MefSoamTcStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the DM session. A value of 'active' indicates the current DM session is active. A value of 'notActive' indicates the current DM session is not active. This attibute is only supported for NID. For EXMP, admin and operstatus attyributes are used. " ::= { soamPmDmCfgEntry 19 } soamPmDmCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. This attribute can be written via SNMP. " ::= { soamPmDmCfgEntry 20 } soamPmDmCfgAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for a DM Session. down - The DM session should be inactive. service - The DM session is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The session should be activated when it becomes available. Alarms are not suppressed. notApplicable - used to tell that attribute is not used in current configuration. " DEFVAL { up } ::= { soamPmDmCfgEntry 21 } soamPmDmCfgOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition to the 'up' state. up - The object is active. " ::= { soamPmDmCfgEntry 22 } soamPmDmCfgStats OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "View current statistics for the DM session. " ::= { soamPmDmCfgEntry 23 } -- ************************************************************************** -- Ethernet Delay Measurement Current Statistic Table -- ************************************************************************** soamPmDmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SoamPmDmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the results for the current Measurement Interval in a SOAM Delay Measurement session gathered during the interval indicated by soamPmLmCfgMeasurementInterval. A row in this table is created automatically by the SNMP Agent when the Delay Measurement session is configured." REFERENCE "[MEF SOAM-PM] R7, R15, D9, D18" ::= { soamPmDmObjects 2 } soamPmDmStatsEntry OBJECT-TYPE SYNTAX SoamPmDmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of soamPmDmStatsTable " INDEX { soamPmDmStatsIndex } ::= { soamPmDmStatsTable 1 } SoamPmDmStatsEntry ::= SEQUENCE { soamPmDmStatsIndex Unsigned32, soamPmDmStatsLocalDeviceType INTEGER, soamPmDmStatsName MgmtNameString, soamPmDmStatsSubrack SubrackNumber, soamPmDmStatsSlot SlotNumber, soamPmDmStatsMaidIdentifier DisplayString, soamPmDmStatsDestMepId Dot1agCfmMepIdOrZero, soamPmDmStatsInternalReference Unsigned32, soamPmDmStatsMepName DisplayString, soamPmDmStatsSuspect15Min TruthValue, soamPmDmStatsSuspectPrevious15Min TruthValue, soamPmDmStatsSuspect24H TruthValue, soamPmDmStatsReset15Min INTEGER, soamPmDmStatsReset24H INTEGER, soamPmDmStatsStartTime15Min DateAndTime, soamPmDmStatsElapsedTime15Min TimeInterval, soamPmDmStatsFrameDelayTwoWayMin15Min Unsigned32WithNA, soamPmDmStatsFrameDelayTwoWayMax15Min Unsigned32, soamPmDmStatsFrameDelayTwoWayAvg15Min Unsigned32, soamPmDmStatsIfdvTwoWayMin15Min Unsigned32WithNA, soamPmDmStatsIfdvTwoWayMax15Min Unsigned32, soamPmDmStatsIfdvTwoWayAvg15Min Unsigned32, soamPmDmStatsStartTimePrevious15Min DateAndTime, soamPmDmStatsElapsedTimePrevious15Min TimeInterval, soamPmDmStatsFrameDelayTwoWayMinPrevious15Min Unsigned32WithNA, soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min Unsigned32, soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min Unsigned32, soamPmDmStatsIfdvTwoWayMinPrevious15Min Unsigned32WithNA, soamPmDmStatsIfdvTwoWayMaxPrevious15Min Unsigned32, soamPmDmStatsIfdvTwoWayAvgPrevious15Min Unsigned32, soamPmDmStatsStartTime24H DateAndTime, soamPmDmStatsElapsedTime24H TimeInterval, soamPmDmStatsFrameDelayTwoWayMin24H Unsigned32WithNA, soamPmDmStatsFrameDelayTwoWayMax24H Unsigned32, soamPmDmStatsFrameDelayTwoWayAvg24H Unsigned32, soamPmDmStatsIfdvTwoWayMin24H Unsigned32WithNA, soamPmDmStatsIfdvTwoWayMax24H Unsigned32, soamPmDmStatsIfdvTwoWayAvg24H Unsigned32, soamPmDmStatsPriority IEEE8021PriorityValue } soamPmDmStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the current Measurement Interval for this PM session. The index is the same as for the configuration, i.e soamPmDmCfgIndex and is not persistent and may be reused between restarts. " ::= { soamPmDmStatsEntry 1 } soamPmDmStatsLocalDeviceType OBJECT-TYPE SYNTAX INTEGER { emxp (1), nidGe (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of device the DM is created and associated. " DEFVAL { emxp } ::= { soamPmDmStatsEntry 2 } soamPmDmStatsName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DM session, same as the name of remote MEP that this DM session is associated with. " ::= { soamPmDmStatsEntry 3 } soamPmDmStatsSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where this OAM object is defined " ::= { soamPmDmStatsEntry 4 } soamPmDmStatsSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The slot where this OAM Object is defined. " ::= { soamPmDmStatsEntry 5 } soamPmDmStatsMaidIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique user definied identifier for the MEG. " DEFVAL { "" } ::= { soamPmDmStatsEntry 6 } soamPmDmStatsDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmDestIsMepId is 'true'. A value of zero means that the destination MEP ID has not been configured. This object is only valid for the entity transmitting the Loss Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for the 'lmCcm' type. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R70, R104" DEFVAL { 0 } ::= { soamPmDmStatsEntry 7 } soamPmDmStatsInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= { soamPmDmStatsEntry 8 } soamPmDmStatsMepName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the MEP this DM session belongs to. Persistent cross-reference to MEP table. " ::= { soamPmDmStatsEntry 9 } soamPmDmStatsSuspect15Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmDmStatsEntry 10 } soamPmDmStatsSuspectPrevious15Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmDmStatsEntry 11 } soamPmDmStatsSuspect24H OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following: 1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The conducting of a performance measurement is halted before the current Measurement Interval is completed 3 - A local test, failure, or reconfiguration that disrupts service " REFERENCE "[MEF SOAM-PM] R39, R40, R41" ::= { soamPmDmStatsEntry 12 } soamPmDmStatsReset15Min OBJECT-TYPE SYNTAX INTEGER { normal (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the 15 minute counters for the DM session. After a successful reset the default value (normal) is restored in this action attribute. " DEFVAL { normal } ::= { soamPmDmStatsEntry 13 } soamPmDmStatsReset24H OBJECT-TYPE SYNTAX INTEGER { normal (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the 24 hour counters for the DM session. After a successful reset the default value (normal) is restored in this action attribute. " DEFVAL { normal } ::= { soamPmDmStatsEntry 14 } soamPmDmStatsStartTime15Min OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R66, R100" ::= { soamPmDmStatsEntry 15 } soamPmDmStatsElapsedTime15Min OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R66, R100" ::= { soamPmDmStatsEntry 16 } soamPmDmStatsFrameDelayTwoWayMin15Min OBJECT-TYPE SYNTAX Unsigned32WithNA (0..100000 | 4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 17 } soamPmDmStatsFrameDelayTwoWayMax15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 18 } soamPmDmStatsFrameDelayTwoWayAvg15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 19 } soamPmDmStatsIfdvTwoWayMin15Min OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 20 } soamPmDmStatsIfdvTwoWayMax15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 21 } soamPmDmStatsIfdvTwoWayAvg15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 22 } soamPmDmStatsStartTimePrevious15Min OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R66, R100" ::= { soamPmDmStatsEntry 23 } soamPmDmStatsElapsedTimePrevious15Min OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R66, R100" ::= { soamPmDmStatsEntry 24 } soamPmDmStatsFrameDelayTwoWayMinPrevious15Min OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 25 } soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 26 } soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 27 } soamPmDmStatsIfdvTwoWayMinPrevious15Min OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 28 } soamPmDmStatsIfdvTwoWayMaxPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 29 } soamPmDmStatsIfdvTwoWayAvgPrevious15Min OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 30 } soamPmDmStatsStartTime24H OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval started. " REFERENCE "[MEF SOAM-PM] R22, R66, R100" ::= { soamPmDmStatsEntry 31 } soamPmDmStatsElapsedTime24H OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time that the current Measurement Interval has been running, in seconds. " REFERENCE "[MEF SOAM-PM] R24, R66, R100" ::= { soamPmDmStatsEntry 32 } soamPmDmStatsFrameDelayTwoWayMin24H OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 33 } soamPmDmStatsFrameDelayTwoWayMax24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 34 } soamPmDmStatsFrameDelayTwoWayAvg24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " REFERENCE "[MEF SOAM-PM] R66" ::= { soamPmDmStatsEntry 35 } soamPmDmStatsIfdvTwoWayMin24H OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " DEFVAL { 4294967294 } ::= { soamPmDmStatsEntry 36 } soamPmDmStatsIfdvTwoWayMax24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 37 } soamPmDmStatsIfdvTwoWayAvg24H OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. " ::= { soamPmDmStatsEntry 38 } soamPmDmStatsPriority OBJECT-TYPE SYNTAX IEEE8021PriorityValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the priority of frames with Delay Measurement OAM message information. The default value is to be the value which yields the lowest frame loss. This object can only be written at creation time and cannot be modified once it has been created. " REFERENCE "[MEF SOAM-PM] R1, R2, R56, D21, R57, R58, R90-R94, D28; [MEF 10.2.1] Section 6.8" DEFVAL { 0 } ::= { soamPmDmStatsEntry 39 } -- ****************************************************************** -- SOAM-PM MIB Units of conformance -- ****************************************************************** soamPmGeneralGroupV1 OBJECT-GROUP OBJECTS { soamPmGeneralLastChangeTime, soamPmGeneralLmStateLastChangeTime, soamPmGeneralLmObjectsTableSize, soamPmGeneralDmObjectsTableSize } STATUS current DESCRIPTION "General objects for the MEF service OAM group (R22.0)." ::= { lumSoamPmGroups 1 } soamPmLmCfgGroupV1 OBJECT-GROUP OBJECTS { soamPmLmCfgIndex, soamPmLmCfgName, soamPmLmCfgDescr, soamPmLmCfgSubrack, soamPmLmCfgSlot, soamPmLmCfgInternalReference, soamPmLmCfgLocalDeviceType, soamPmLmCfgType, soamPmLmCfgEnabled, soamPmLmCfgMessagePeriod, soamPmLmCfgPriority, soamPmLmCfgDestMacAddress, soamPmLmCfgMepName, soamPmLmCfgMaidIdentifier, soamPmLmCfgDestMepId, soamPmLmCfgDestIsMepId, soamPmLmCfgAvailabilityFlrThreshold, soamPmLmCfgAvailabilityUasAlarmThreshold, soamPmLmCfgSessionType, soamPmLmCfgSessionStatus } STATUS current DESCRIPTION "Objects for the MEF Service OAM LM Configuration group (R22.0)." ::= { lumSoamPmGroups 2 } soamPmLmStatsGroupV1 OBJECT-GROUP OBJECTS { soamPmLmStatsIndex, soamPmLmStatsLocalDeviceType, soamPmLmStatsName, soamPmLmStatsSubrack, soamPmLmStatsSlot, soamPmLmStatsDestMepId, soamPmLmStatsMaidIdentifier, soamPmLmStatsInternalReference, soamPmLmStatsMepName, soamPmLmStatsSuspect15Min, soamPmLmStatsSuspectPrevious15Min, soamPmLmStatsSuspect24H, soamPmLmStatsReset15Min, soamPmLmStatsReset24H, soamPmLmStatsStartTime15Min, soamPmLmStatsElapsedTime15Min, soamPmLmStatsForwardTransmittedFrames15Min, soamPmLmStatsForwardReceivedFrames15Min, soamPmLmStatsForwardMinFlr15Min, soamPmLmStatsForwardMaxFlr15Min, soamPmLmStatsForwardAvgFlr15Min, soamPmLmStatsForwardHighLoss15Min, soamPmLmStatsBackwardTransmittedFrames15Min, soamPmLmStatsBackwardReceivedFrames15Min, soamPmLmStatsBackwardMinFlr15Min, soamPmLmStatsBackwardMaxFlr15Min, soamPmLmStatsBackwardAvgFlr15Min, soamPmLmStatsBackwardHighLoss15Min, soamPmLmStatsUnavailableSeconds15Min, soamPmLmStatsStartTimePrevious15Min, soamPmLmStatsElapsedTimePrevious15Min, soamPmLmStatsForwardTransmittedFramesPrevious15Min, soamPmLmStatsForwardReceivedFramesPrevious15Min, soamPmLmStatsForwardMinFlrPrevious15Min, soamPmLmStatsForwardMaxFlrPrevious15Min, soamPmLmStatsForwardAvgFlrPrevious15Min, soamPmLmStatsForwardHighLossPrevious15Min, soamPmLmStatsBackwardTransmittedFramesPrevious15Min, soamPmLmStatsBackwardReceivedFramesPrevious15Min, soamPmLmStatsBackwardMinFlrPrevious15Min, soamPmLmStatsBackwardMaxFlrPrevious15Min, soamPmLmStatsBackwardAvgFlrPrevious15Min, soamPmLmStatsBackwardHighLossPrevious15Min, soamPmLmStatsStartTime24H, soamPmLmStatsElapsedTime24H, soamPmLmStatsForwardTransmittedFrames24H, soamPmLmStatsForwardReceivedFrames24H, soamPmLmStatsForwardMinFlr24H, soamPmLmStatsForwardMaxFlr24H, soamPmLmStatsForwardAvgFlr24H, soamPmLmStatsForwardHighLoss24H, soamPmLmStatsBackwardTransmittedFrames24H, soamPmLmStatsBackwardReceivedFrames24H, soamPmLmStatsBackwardMinFlr24H, soamPmLmStatsBackwardMaxFlr24H, soamPmLmStatsBackwardAvgFlr24H, soamPmLmStatsBackwardHighLoss24H, soamPmLmStatsUas } STATUS current DESCRIPTION "Objects for the MEF Service OAM LM current statistics group (R22.0)." ::= { lumSoamPmGroups 3 } soamPmDmCfgGroupV1 OBJECT-GROUP OBJECTS { soamPmDmCfgIndex, soamPmDmCfgName, soamPmDmCfgDescr, soamPmDmCfgSubrack, soamPmDmCfgSlot, soamPmDmCfgInternalReference, soamPmDmCfgLocalDeviceType, soamPmDmCfgDropEligible, soamPmDmCfgType, soamPmDmCfgEnabled, soamPmDmCfgMessagePeriod, soamPmDmCfgPriority, soamPmDmCfgDestMacAddress, soamPmDmCfgMepName, soamPmDmCfgMaidIdentifier, soamPmDmCfgDestMepId, soamPmDmCfgDestIsMepId, soamPmDmCfgSessionType, soamPmDmCfgSessionStatus } STATUS current DESCRIPTION "Objects for the Service OAM DM configuration group (R22.0)." ::= { lumSoamPmGroups 4 } soamPmDmStatsGroupV1 OBJECT-GROUP OBJECTS { soamPmDmStatsIndex, soamPmDmStatsLocalDeviceType, soamPmDmStatsName, soamPmDmStatsSubrack, soamPmDmStatsSlot, soamPmDmStatsDestMepId, soamPmDmStatsMaidIdentifier, soamPmDmStatsInternalReference, soamPmDmStatsMepName, soamPmDmStatsSuspect15Min, soamPmDmStatsSuspectPrevious15Min, soamPmDmStatsSuspect24H, soamPmDmStatsReset15Min, soamPmDmStatsReset24H, soamPmDmStatsStartTime15Min, soamPmDmStatsElapsedTime15Min, soamPmDmStatsFrameDelayTwoWayMin15Min, soamPmDmStatsFrameDelayTwoWayMax15Min, soamPmDmStatsFrameDelayTwoWayAvg15Min, soamPmDmStatsIfdvTwoWayMin15Min, soamPmDmStatsIfdvTwoWayMax15Min, soamPmDmStatsIfdvTwoWayAvg15Min, soamPmDmStatsStartTimePrevious15Min, soamPmDmStatsElapsedTimePrevious15Min, soamPmDmStatsFrameDelayTwoWayMinPrevious15Min, soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min, soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min, soamPmDmStatsIfdvTwoWayMinPrevious15Min, soamPmDmStatsIfdvTwoWayMaxPrevious15Min, soamPmDmStatsIfdvTwoWayAvgPrevious15Min, soamPmDmStatsStartTime24H, soamPmDmStatsElapsedTime24H, soamPmDmStatsFrameDelayTwoWayMin24H, soamPmDmStatsFrameDelayTwoWayMax24H, soamPmDmStatsFrameDelayTwoWayAvg24H, soamPmDmStatsIfdvTwoWayMin24H, soamPmDmStatsIfdvTwoWayMax24H, soamPmDmStatsIfdvTwoWayAvg24H } STATUS current DESCRIPTION "Objects for the Service OAM DM current statistics group (R22.0)." ::= { lumSoamPmGroups 5 } soamPmLmCfgGroupV2 OBJECT-GROUP OBJECTS { soamPmLmCfgIndex, soamPmLmCfgName, soamPmLmCfgDescr, soamPmLmCfgSubrack, soamPmLmCfgSlot, soamPmLmCfgInternalReference, soamPmLmCfgLocalDeviceType, soamPmLmCfgType, soamPmLmCfgEnabled, soamPmLmCfgMessagePeriod, soamPmLmCfgPriority, soamPmLmCfgDestMacAddress, soamPmLmCfgMepName, soamPmLmCfgMaidIdentifier, soamPmLmCfgDestMepId, soamPmLmCfgDestIsMepId, soamPmLmCfgAvailabilityFlrThreshold, soamPmLmCfgAvailabilityUasAlarmThreshold, soamPmLmCfgSessionType, soamPmLmCfgSessionStatus, soamPmLmCfgCosAwareness, soamPmLmCfgRowStatus, soamPmLmCfgAdminStatus, soamPmLmCfgOperStatus } STATUS current DESCRIPTION "Objects for the MEF Service OAM LM Configuration group (R23.0)." ::= { lumSoamPmGroups 6 } soamPmDmCfgGroupV2 OBJECT-GROUP OBJECTS { soamPmDmCfgIndex, soamPmDmCfgName, soamPmDmCfgDescr, soamPmDmCfgSubrack, soamPmDmCfgSlot, soamPmDmCfgInternalReference, soamPmDmCfgLocalDeviceType, soamPmDmCfgDropEligible, soamPmDmCfgType, soamPmDmCfgEnabled, soamPmDmCfgMessagePeriod, soamPmDmCfgPriority, soamPmDmCfgDestMacAddress, soamPmDmCfgMepName, soamPmDmCfgMaidIdentifier, soamPmDmCfgDestMepId, soamPmDmCfgDestIsMepId, soamPmDmCfgSessionType, soamPmDmCfgSessionStatus, soamPmDmCfgRowStatus, soamPmDmCfgAdminStatus, soamPmDmCfgOperStatus } STATUS current DESCRIPTION "Objects for the Service OAM DM configuration group (R23.0)." ::= { lumSoamPmGroups 7 } soamPmLmStatsGroupV2 OBJECT-GROUP OBJECTS { soamPmLmStatsIndex, soamPmLmStatsLocalDeviceType, soamPmLmStatsName, soamPmLmStatsSubrack, soamPmLmStatsSlot, soamPmLmStatsDestMepId, soamPmLmStatsMaidIdentifier, soamPmLmStatsInternalReference, soamPmLmStatsMepName, soamPmLmStatsSuspect15Min, soamPmLmStatsSuspectPrevious15Min, soamPmLmStatsSuspect24H, soamPmLmStatsReset15Min, soamPmLmStatsReset24H, soamPmLmStatsStartTime15Min, soamPmLmStatsElapsedTime15Min, soamPmLmStatsForwardTransmittedFrames15Min, soamPmLmStatsForwardReceivedFrames15Min, soamPmLmStatsForwardMinFlr15Min, soamPmLmStatsForwardMaxFlr15Min, soamPmLmStatsForwardAvgFlr15Min, soamPmLmStatsForwardHighLoss15Min, soamPmLmStatsBackwardTransmittedFrames15Min, soamPmLmStatsBackwardReceivedFrames15Min, soamPmLmStatsBackwardMinFlr15Min, soamPmLmStatsBackwardMaxFlr15Min, soamPmLmStatsBackwardAvgFlr15Min, soamPmLmStatsBackwardHighLoss15Min, soamPmLmStatsUnavailableSeconds15Min, soamPmLmStatsStartTimePrevious15Min, soamPmLmStatsElapsedTimePrevious15Min, soamPmLmStatsForwardTransmittedFramesPrevious15Min, soamPmLmStatsForwardReceivedFramesPrevious15Min, soamPmLmStatsForwardMinFlrPrevious15Min, soamPmLmStatsForwardMaxFlrPrevious15Min, soamPmLmStatsForwardAvgFlrPrevious15Min, soamPmLmStatsForwardHighLossPrevious15Min, soamPmLmStatsBackwardTransmittedFramesPrevious15Min, soamPmLmStatsBackwardReceivedFramesPrevious15Min, soamPmLmStatsBackwardMinFlrPrevious15Min, soamPmLmStatsBackwardMaxFlrPrevious15Min, soamPmLmStatsBackwardAvgFlrPrevious15Min, soamPmLmStatsBackwardHighLossPrevious15Min, soamPmLmStatsStartTime24H, soamPmLmStatsElapsedTime24H, soamPmLmStatsForwardTransmittedFrames24H, soamPmLmStatsForwardReceivedFrames24H, soamPmLmStatsForwardMinFlr24H, soamPmLmStatsForwardMaxFlr24H, soamPmLmStatsForwardAvgFlr24H, soamPmLmStatsForwardHighLoss24H, soamPmLmStatsBackwardTransmittedFrames24H, soamPmLmStatsBackwardReceivedFrames24H, soamPmLmStatsBackwardMinFlr24H, soamPmLmStatsBackwardMaxFlr24H, soamPmLmStatsBackwardAvgFlr24H, soamPmLmStatsBackwardHighLoss24H, soamPmLmStatsUas, soamPmLmStatsPriority } STATUS current DESCRIPTION "Objects for the MEF Service OAM LM current statistics group (R23.0)." ::= { lumSoamPmGroups 8 } soamPmDmStatsGroupV2 OBJECT-GROUP OBJECTS { soamPmDmStatsIndex, soamPmDmStatsLocalDeviceType, soamPmDmStatsName, soamPmDmStatsSubrack, soamPmDmStatsSlot, soamPmDmStatsDestMepId, soamPmDmStatsMaidIdentifier, soamPmDmStatsInternalReference, soamPmDmStatsMepName, soamPmDmStatsSuspect15Min, soamPmDmStatsSuspectPrevious15Min, soamPmDmStatsSuspect24H, soamPmDmStatsReset15Min, soamPmDmStatsReset24H, soamPmDmStatsStartTime15Min, soamPmDmStatsElapsedTime15Min, soamPmDmStatsFrameDelayTwoWayMin15Min, soamPmDmStatsFrameDelayTwoWayMax15Min, soamPmDmStatsFrameDelayTwoWayAvg15Min, soamPmDmStatsIfdvTwoWayMin15Min, soamPmDmStatsIfdvTwoWayMax15Min, soamPmDmStatsIfdvTwoWayAvg15Min, soamPmDmStatsStartTimePrevious15Min, soamPmDmStatsElapsedTimePrevious15Min, soamPmDmStatsFrameDelayTwoWayMinPrevious15Min, soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min, soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min, soamPmDmStatsIfdvTwoWayMinPrevious15Min, soamPmDmStatsIfdvTwoWayMaxPrevious15Min, soamPmDmStatsIfdvTwoWayAvgPrevious15Min, soamPmDmStatsStartTime24H, soamPmDmStatsElapsedTime24H, soamPmDmStatsFrameDelayTwoWayMin24H, soamPmDmStatsFrameDelayTwoWayMax24H, soamPmDmStatsFrameDelayTwoWayAvg24H, soamPmDmStatsIfdvTwoWayMin24H, soamPmDmStatsIfdvTwoWayMax24H, soamPmDmStatsIfdvTwoWayAvg24H, soamPmDmStatsPriority } STATUS current DESCRIPTION "Objects for the Service OAM DM current statistics group (R23.0)." ::= { lumSoamPmGroups 9 } soamPmLmCfgGroupV3 OBJECT-GROUP OBJECTS { soamPmLmCfgIndex, soamPmLmCfgName, soamPmLmCfgDescr, soamPmLmCfgSubrack, soamPmLmCfgSlot, soamPmLmCfgInternalReference, soamPmLmCfgLocalDeviceType, soamPmLmCfgType, soamPmLmCfgEnabled, soamPmLmCfgMessagePeriod, soamPmLmCfgPriority, soamPmLmCfgDestMacAddress, soamPmLmCfgMepName, soamPmLmCfgMaidIdentifier, soamPmLmCfgDestMepId, soamPmLmCfgDestIsMepId, soamPmLmCfgAvailabilityFlrThreshold, soamPmLmCfgAvailabilityUasAlarmThreshold, soamPmLmCfgSessionType, soamPmLmCfgSessionStatus, soamPmLmCfgCosAwareness, soamPmLmCfgRowStatus, soamPmLmCfgAdminStatus, soamPmLmCfgOperStatus, soamPmLmCfgStats} STATUS current DESCRIPTION "Objects for the MEF Service OAM LM Configuration group (R25.0)." ::= { lumSoamPmGroups 10 } soamPmDmCfgGroupV3 OBJECT-GROUP OBJECTS { soamPmDmCfgIndex, soamPmDmCfgName, soamPmDmCfgDescr, soamPmDmCfgSubrack, soamPmDmCfgSlot, soamPmDmCfgInternalReference, soamPmDmCfgLocalDeviceType, soamPmDmCfgDropEligible, soamPmDmCfgType, soamPmDmCfgEnabled, soamPmDmCfgMessagePeriod, soamPmDmCfgPriority, soamPmDmCfgDestMacAddress, soamPmDmCfgMepName, soamPmDmCfgMaidIdentifier, soamPmDmCfgDestMepId, soamPmDmCfgDestIsMepId, soamPmDmCfgSessionType, soamPmDmCfgSessionStatus, soamPmDmCfgRowStatus, soamPmDmCfgAdminStatus, soamPmDmCfgOperStatus, soamPmDmCfgStats } STATUS current DESCRIPTION "Objects for the Service OAM DM configuration group (R25.0)." ::= { lumSoamPmGroups 11 } -- ****************************************************************** -- SOAM-PM MIB Module Compliance statements -- ****************************************************************** soamPmBasicComplV1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the MEF Service OAM PM MIB. (R22.0)" MODULE MANDATORY-GROUPS { soamPmGeneralGroupV1, soamPmLmCfgGroupV1, soamPmLmStatsGroupV1, soamPmDmCfgGroupV1, soamPmDmStatsGroupV1 } ::= { lumSoamPmCompliances 1 } soamPmBasicComplV2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the MEF Service OAM PM MIB. (R23.0)" MODULE MANDATORY-GROUPS { soamPmGeneralGroupV1, soamPmLmCfgGroupV2, soamPmLmStatsGroupV2, soamPmDmCfgGroupV2, soamPmDmStatsGroupV2 } ::= { lumSoamPmCompliances 2 } soamPmBasicComplV3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the MEF Service OAM PM MIB. (R25.0)" MODULE MANDATORY-GROUPS { soamPmGeneralGroupV1, soamPmLmCfgGroupV3, soamPmLmStatsGroupV2, soamPmDmCfgGroupV3, soamPmDmStatsGroupV2 } ::= { lumSoamPmCompliances 3 } END