LUM-IP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, DateAndTime FROM SNMPv2-TC lumModules, lumIpMIB FROM LUM-REG MgmtNameString, CommandString FROM LUM-TC; lumIpMIBModule MODULE-IDENTITY LAST-UPDATED "201812200000Z" -- Dec 20th 2018 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The IP and OSPF MIB. - General - IP addresses - IP routes - OSPF interfaces " REVISION "201812200000Z" -- Dec 20th 2018 DESCRIPTION "Changes made for release r32.0: - Added ipIfDstAddr in table ipIfGroup" REVISION "201805310000Z" -- May 31th 2018 DESCRIPTION "Changes made for release r30.1.1: - Added netconfMode in table general" REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201606140000Z" -- Jun 14th 2016 DESCRIPTION "Changes made for release r27a - Added sftp_mode - Added tftp_mode enable/disable configuration" REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default operStatus to down." REVISION "201308140000Z" -- August 14th 2013 DESCRIPTION "Improved help text for metric." REVISION "200901230000Z" -- January 23th 2009 DESCRIPTION "Added OSPF Passive interface attribute." REVISION "200412060000Z" -- December 6th 2004 DESCRIPTION "Added IP address command." REVISION "200412030000Z" -- December 3rd 2004 DESCRIPTION "Added symbolic name attributes for routes and OSPF neighbours." REVISION "200410010000Z" -- October 1st 2004 DESCRIPTION "Added table size variables." REVISION "200305150000Z" -- May 15th 2003 DESCRIPTION "Added ftp and telnet mode." REVISION "200209130000Z" -- September 13th 2002 DESCRIPTION "Added OSPF general parameters, interface and neighbor list." REVISION "200203120000Z" -- March 12th 2002 DESCRIPTION "Added IP address and mask for the mgmt interface. Interface table is now read-only." REVISION "200111210000Z" -- November 21st 2001 DESCRIPTION "Added metric to the ospf interface." REVISION "200111200000Z" -- November 20th 2001 DESCRIPTION "Removed metrics, moved in-band interfaces to the WDM-mib. Minor fixes." REVISION "200111160000Z" -- November 16th 2001 DESCRIPTION "The initial revision of this module." ::= { lumModules 15 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumIpConfs OBJECT IDENTIFIER ::= { lumIpMIB 1 } lumIpGroups OBJECT IDENTIFIER ::= { lumIpConfs 1 } lumIpCompl OBJECT IDENTIFIER ::= { lumIpConfs 2 } -- ---------------------------------------------------- -- Root for objects in the ip MIB -- ---------------------------------------------------- lumIpMIBObjects OBJECT IDENTIFIER ::= { lumIpMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- ipGeneral OBJECT IDENTIFIER ::= { lumIpMIBObjects 1 } ipIfList OBJECT IDENTIFIER ::= { lumIpMIBObjects 2 } ipRouteList OBJECT IDENTIFIER ::= { lumIpMIBObjects 3 } ospfGeneral OBJECT IDENTIFIER ::= { lumIpMIBObjects 4 } ospfIfList OBJECT IDENTIFIER ::= { lumIpMIBObjects 5 } ospfNbrList OBJECT IDENTIFIER ::= { lumIpMIBObjects 6 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- N/A -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- ipGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { ipGeneral 1 } ipGeneralNextMgmtAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address associated with the management interface. If set to 0.0.0.0 the IP address from the boot parameter area is used. Updating this variable requires a restart of the system. " ::= { ipGeneral 2 } ipGeneralStoredMgmtAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address associated with the management interface. Note that this address may be different from the one stored in the boot parameter area. " ::= { ipGeneral 3 } ipGeneralNextMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask associated with the IP address of the management interface. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. If set to 0.0.0.0 the net mask from the boot parameter area is used. Updating this variable requires a restart of the system. " ::= { ipGeneral 4 } ipGeneralStoredMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask associated with the management interface. Note that this mask may be different from the one stored in the boot parameter area. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. " ::= { ipGeneral 5 } ipGeneralConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { ipGeneral 6 } ipGeneralTelnetMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables/disables the telnet service in the node. enabled - Telnet is enabled. disabled - Telnet is disabled. " DEFVAL { enabled } ::= { ipGeneral 7 } ipGeneralFtpMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables/disables access the file transfer (FTP) service in the network element. enabled - FTP is enabled. disabled - FTP is disabled. " DEFVAL { enabled } ::= { ipGeneral 8 } ipGeneralIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the interface table. " ::= { ipGeneral 9 } ipGeneralRouteTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the route table. " ::= { ipGeneral 10 } ipGeneralOspfIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the OSPF interface table. " ::= { ipGeneral 11 } ipGeneralOspfNbrTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the OSPF neighbour table. " ::= { ipGeneral 12 } ipGeneralChangeNextMgmtAddr OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Change IP address and mask. If the address is set to 0.0.0.0 the IP address and net mask from the boot parameter area is used. Updating this variable requires a restart of the system. " ::= { ipGeneral 13 } ipGeneralSftpMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "If this is enabled, then sftp is available on the node. enabled - SFTP is working. disabled - SFTP will not work on this node. " DEFVAL { enabled } ::= { ipGeneral 14 } ipGeneralTftpMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or Disable the TFTP service on the CU for transferring files using DCN or the local craft ETH port (CU-SFP/III). enabled - TFTP server on CU (Control Unit) is allowed to recieve data from DCN and Locat Craft ETH. disabled - TFTP server on CU (Control Unit) is not allowed to recieve data to/from DCN and Local Craft ETH. This is default from release 27. Note: Local Craft ETH is available on CU-SFP/III. " DEFVAL { disabled } ::= { ipGeneral 15 } ipGeneralNetconfMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or Disable the NETCONF (Network Configuration Protocol) service for the network element. enabled - NETCONF is enabled. disabled - NETCONF is disabled. " DEFVAL { disabled } ::= { ipGeneral 16 } -- ---------------------------------------------------- -- IP interface table -- ---------------------------------------------------- ipIfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP interface table." ::= { ipIfList 1 } ipIfEntry OBJECT-TYPE SYNTAX IpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IP interface table. " INDEX { ipIfIndex } ::= { ipIfTable 1 } IpIfEntry ::= SEQUENCE { ipIfIndex Unsigned32, ipIfName MgmtNameString, ipIfAddr IpAddress, ipIfNetMask IpAddress, ipIfOperStatus INTEGER, ipIfDstAddr IpAddress } ipIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { ipIfEntry 1 } ipIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the object, for example 'eth1' or 'ppp-1-7'. For the latter the numbers indicate the subrack and slot number. " ::= { ipIfEntry 2 } ipIfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. Set to 0.0.0.0 if no address is assigned. " ::= { ipIfEntry 3 } ipIfNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. " ::= { ipIfEntry 4 } ipIfOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), up (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. down - The interfaces is disabled. up - The interface is ready to pass packages. " DEFVAL { down } ::= { ipIfEntry 5 } ipIfDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this interface. Set to 0.0.0.0 if no address is assigned. " ::= { ipIfEntry 6 } -- ---------------------------------------------------- -- IP routing table -- ---------------------------------------------------- ipRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statically configured IP routes." ::= { ipRouteList 1 } ipRouteEntry OBJECT-TYPE SYNTAX IpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the routing table. " INDEX { ipRouteIndex } ::= { ipRouteTable 1 } IpRouteEntry ::= SEQUENCE { ipRouteIndex Unsigned32, ipRouteDest IpAddress, ipRouteMask IpAddress, ipRouteNextHop IpAddress, ipRouteIfName MgmtNameString, ipRouteRowStatus RowStatus, ipRouteProto INTEGER, ipRouteMetric Unsigned32, ipRouteOperStatus INTEGER, ipRouteName MgmtNameString } ipRouteIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { ipRouteEntry 1 } ipRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipRouteMask object is not equal to x. " ::= { ipRouteEntry 2 } ipRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipRouteDest object is not equal to ipRouteDest. " ::= { ipRouteEntry 3 } ipRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. nextHop is restricted to the same sub-net as the node belongs. " ::= { ipRouteEntry 4 } ipRouteIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the local interface through which the next hop of this route should be reached. The following interface names are permitted: pn-n-n-n-n - In-band management wrapper channel or optical supervision interfaces. Where n is a number. Set to the empty string if not used. " ::= { ipRouteEntry 5 } ipRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. " ::= { ipRouteEntry 6 } ipRouteProto OBJECT-TYPE SYNTAX INTEGER { system (1), kernel (2), connect (3), static (4), rip (5), ripng (6), ospf (7), ospf6 (8), bgp (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. " ::= { ipRouteEntry 7 } ipRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes ipRouteProto value. Note, this value is not possible to change when protocol is set to 'connect'. " DEFVAL { 0 } ::= { ipRouteEntry 8 } ipRouteOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), up (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative state for the interface. down - The route is in-active. up - The route is active. " ::= { ipRouteEntry 9 } ipRouteName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "Symbolic name of the route entry. " ::= { ipRouteEntry 10 } -- ---------------------------------------------------- -- OSPF general group -- ---------------------------------------------------- ospfGeneralRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address used as a router id for the OSPF routing protocol. " ::= { ospfGeneral 1 } ospfGeneralDistrMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables distribution of static routes throughout the OSPF routing domain (i.e. the so called AS). Note: The values for metric type and cost revert back to default values when distribution is disabled. enabled - Routes are distributed. disabled - Static routes are not distributed. " DEFVAL { disabled } ::= { ospfGeneral 2 } ospfGeneralDistrMetricType OBJECT-TYPE SYNTAX INTEGER { comparableCost (1), nonComparable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The (common) metric type for all advertised static routes. See also RFC 2328 'OSPF Version 2'. Note: The values for metric type and cost revert back to default values when distribution is disabled. comparableCost - External type 1 nonComparable - External type 2 " DEFVAL { nonComparable } ::= { ospfGeneral 3 } ospfGeneralDistrMetric OBJECT-TYPE SYNTAX Unsigned32 (0..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "The (common) cost for all advertised static routes. Note: The values for metric type and cost revert back to default values when distribution is disabled. " DEFVAL { 20 } ::= { ospfGeneral 4 } -- ---------------------------------------------------- -- OSPF interface group -- ---------------------------------------------------- ospfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Table describes the interfaces from the viewpoint of OSPF." ::= { ospfIfList 1 } ospfIfEntry OBJECT-TYPE SYNTAX OspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Entry describes one interface from the viewpoint of OSPF. " INDEX { ospfIfIndex } ::= { ospfIfTable 1 } OspfIfEntry ::= SEQUENCE { ospfIfIndex Unsigned32, ospfIfName MgmtNameString, ospfIfAreaId IpAddress, ospfIfMetric Unsigned32, ospfIfRtrPriority Integer32, ospfIfDesignatedRouterId IpAddress, ospfIfBackupDesignatedRouterId IpAddress, ospfIfAdminStatus INTEGER, ospfIfOperStatus INTEGER, ospfIfRowStatus RowStatus, ospfIfPassive INTEGER } ospfIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { ospfIfEntry 1 } ospfIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the interface. OSPF configuration is not permitted on the following interfaces: The following interface names are permitted: eth1 - The management interface. pn-n-n-n-n - In-band management wrapper channel or optical supervision channels interfaces. Where n is a number. " ::= { ospfIfEntry 3 } ospfIfAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. " ::= { ospfIfEntry 4 } -- The following does not come out well in the generate help text; -- should include a fix in the help text generator... -- DEFVAL { '00000000'h } ospfIfMetric OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF internal cost. " DEFVAL { 10 } ::= { ospfIfEntry 5 } ospfIfRtrPriority OBJECT-TYPE SYNTAX Integer32 (0..'FF'h) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. When two routers attached to a network both attempt to become Designated Router, the one with the highest Router Priority value takes precedence. In the event of a tie in this value, routers will use their Router ID as a tie breaker. " DEFVAL { 0 } ::= { ospfIfEntry 6 } ospfIfDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router id of the designated router for the network to which the interface connects. 0.0.0.0 means that there is no designated router. " ::= { ospfIfEntry 7 } ospfIfBackupDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router id of the backup designated router for the network to which the interface connects. 0.0.0.0 means that there is no backup designated router. " ::= { ospfIfEntry 8 } ospfIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF administrative status of the interface. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'down' denotes that the interface is external to OSPF. " DEFVAL { down } ::= { ospfIfEntry 9 } ospfIfOperStatus OBJECT-TYPE SYNTAX INTEGER { undefined (0), down (1), loopback (2), waiting (3), ptp (4), dr (5), bdr (6), odr (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF operative status of the interface. See also RFC 2328 'OSPF Version 2'. down loopback waiting ptp - point to point dr - designated router bdr - backup designated router odr - other designated router " ::= { ospfIfEntry 10 } ospfIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. " ::= { ospfIfEntry 11 } ospfIfPassive OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF Passive mode. If OSPF Passive mode is set to enable, OSPF will not advertice itself on this interface. This interface will however be adverticed on other interfaces. " DEFVAL { disabled } ::= { ospfIfEntry 12 } -- ---------------------------------------------------- -- OSPF neighbor group -- ---------------------------------------------------- ospfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Neighbors." ::= { ospfNbrList 1 } ospfNbrEntry OBJECT-TYPE SYNTAX OspfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Neighbor Table describes all neighbors in the locality of the subject router. " INDEX { ospfNbrIndex } ::= { ospfNbrTable 1 } OspfNbrEntry ::= SEQUENCE { ospfNbrIndex Unsigned32, ospfNbrIpAddr IpAddress, ospfNbrRtrId IpAddress, ospfNbrIfName MgmtNameString, ospfNbrOperStatus INTEGER, ospfNbrName MgmtNameString } ospfNbrIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { ospfNbrEntry 1 } ospfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the address of another of the neighbors interfaces. " ::= { ospfNbrEntry 2 } ospfNbrRtrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An IP address uniquely identifying the neighboring router in the Autonomous System. " ::= { ospfNbrEntry 3 } ospfNbrIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the local interface the neighboring router has been discovered on. " ::= { ospfNbrEntry 4 } ospfNbrOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the relationship with this neighbor. See also RFC 2328 'OSPF Version 2'. " ::= { ospfNbrEntry 5 } ospfNbrName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "A symbolic name of the neighbor. " ::= { ospfNbrEntry 6 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- ipGeneralGroup OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask } STATUS current DESCRIPTION "The general objects." ::= { lumIpGroups 1 } ipIfGroup OBJECT-GROUP OBJECTS { ipIfIndex, ipIfName, ipIfAddr, ipIfNetMask, ipIfOperStatus } STATUS deprecated DESCRIPTION "The IP interface objects." ::= { lumIpGroups 2 } ipRouteGroup OBJECT-GROUP OBJECTS { ipRouteIndex, ipRouteDest, ipRouteMask, ipRouteNextHop, ipRouteIfName, ipRouteRowStatus, ipRouteProto, ipRouteMetric, ipRouteOperStatus } STATUS deprecated DESCRIPTION "The IP route objects." ::= { lumIpGroups 3 } ospfGeneralGroup OBJECT-GROUP OBJECTS { ospfGeneralRouterId, ospfGeneralDistrMode, ospfGeneralDistrMetricType, ospfGeneralDistrMetric } STATUS current DESCRIPTION "The OSPF general objects." ::= { lumIpGroups 4 } ospfIfGroup OBJECT-GROUP OBJECTS { ospfIfIndex, ospfIfName, ospfIfAreaId, ospfIfMetric, ospfIfRtrPriority, ospfIfDesignatedRouterId, ospfIfBackupDesignatedRouterId, ospfIfAdminStatus, ospfIfOperStatus, ospfIfRowStatus } STATUS deprecated DESCRIPTION "The OSPF interface objects." ::= { lumIpGroups 5 } ospfNbrGroup OBJECT-GROUP OBJECTS { ospfNbrIndex, ospfNbrIpAddr, ospfNbrRtrId, ospfNbrIfName, ospfNbrOperStatus } STATUS deprecated DESCRIPTION "The OSPF neighbor objects." ::= { lumIpGroups 6 } ipGeneralGroupV2 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime } STATUS deprecated DESCRIPTION "The general objects v2." ::= { lumIpGroups 7 } ipGeneralGroupV3 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime, ipGeneralTelnetMode, ipGeneralFtpMode } STATUS current DESCRIPTION "The general objects v3." ::= { lumIpGroups 8 } ipGeneralGroupV4 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime, ipGeneralTelnetMode, ipGeneralFtpMode, ipGeneralIfTableSize, ipGeneralRouteTableSize, ipGeneralOspfIfTableSize, ipGeneralOspfNbrTableSize } STATUS deprecated DESCRIPTION "The general objects v4." ::= { lumIpGroups 9 } ipRouteGroupV2 OBJECT-GROUP OBJECTS { ipRouteIndex, ipRouteDest, ipRouteMask, ipRouteNextHop, ipRouteIfName, ipRouteRowStatus, ipRouteProto, ipRouteMetric, ipRouteOperStatus, ipRouteName } STATUS current DESCRIPTION "The IP route objects v2." ::= { lumIpGroups 10 } ospfNbrGroupV2 OBJECT-GROUP OBJECTS { ospfNbrIndex, ospfNbrIpAddr, ospfNbrRtrId, ospfNbrIfName, ospfNbrOperStatus, ospfNbrName } STATUS current DESCRIPTION "The OSPF neighbor objects v2." ::= { lumIpGroups 11 } ipGeneralGroupV5 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime, ipGeneralTelnetMode, ipGeneralFtpMode, ipGeneralIfTableSize, ipGeneralRouteTableSize, ipGeneralOspfIfTableSize, ipGeneralOspfNbrTableSize, ipGeneralChangeNextMgmtAddr } STATUS deprecated DESCRIPTION "The general objects v5." ::= { lumIpGroups 12 } ospfIfGroupV2 OBJECT-GROUP OBJECTS { ospfIfIndex, ospfIfName, ospfIfAreaId, ospfIfMetric, ospfIfRtrPriority, ospfIfDesignatedRouterId, ospfIfBackupDesignatedRouterId, ospfIfAdminStatus, ospfIfOperStatus, ospfIfRowStatus, ospfIfPassive } STATUS current DESCRIPTION "The OSPF interface objects." ::= { lumIpGroups 13 } ipGeneralGroupV6 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime, ipGeneralTelnetMode, ipGeneralFtpMode, ipGeneralIfTableSize, ipGeneralRouteTableSize, ipGeneralOspfIfTableSize, ipGeneralOspfNbrTableSize, ipGeneralChangeNextMgmtAddr, ipGeneralSftpMode, ipGeneralTftpMode} STATUS deprecated DESCRIPTION "The general objects v6." ::= { lumIpGroups 14 } ipGeneralGroupV7 OBJECT-GROUP OBJECTS { ipGeneralLastChangeTime, ipGeneralNextMgmtAddress, ipGeneralStoredMgmtAddress, ipGeneralNextMgmtNetMask, ipGeneralStoredMgmtNetMask, ipGeneralConfigLastChangeTime, ipGeneralTelnetMode, ipGeneralFtpMode, ipGeneralIfTableSize, ipGeneralRouteTableSize, ipGeneralOspfIfTableSize, ipGeneralOspfNbrTableSize, ipGeneralChangeNextMgmtAddr, ipGeneralSftpMode, ipGeneralTftpMode, ipGeneralNetconfMode} STATUS current DESCRIPTION "The general objects v7." ::= { lumIpGroups 15 } ipIfGroupV2 OBJECT-GROUP OBJECTS { ipIfIndex, ipIfName, ipIfAddr, ipIfNetMask, ipIfOperStatus, ipIfDstAddr } STATUS current DESCRIPTION "The IP interface objects." ::= { lumIpGroups 16 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumIpBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB." MODULE MANDATORY-GROUPS { ipGeneralGroup, ipIfGroup, ipRouteGroup } ::= { lumIpCompl 1 } lumIpBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v2." MODULE MANDATORY-GROUPS { ipGeneralGroup, ipIfGroup, ipRouteGroup, ospfGeneralGroup, ospfIfGroup, ospfNbrGroup } ::= { lumIpCompl 2 } lumIpBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v3." MODULE MANDATORY-GROUPS { ipGeneralGroupV2, ipIfGroup, ipRouteGroup, ospfGeneralGroup, ospfIfGroup, ospfNbrGroup } ::= { lumIpCompl 3 } lumIpBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v4." MODULE MANDATORY-GROUPS { ipGeneralGroupV3, ipIfGroup, ipRouteGroup, ospfGeneralGroup, ospfIfGroup, ospfNbrGroup } ::= { lumIpCompl 4 } lumIpBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v5." MODULE MANDATORY-GROUPS { ipGeneralGroupV4, ipIfGroup, ipRouteGroup, ospfGeneralGroup, ospfIfGroup, ospfNbrGroup } ::= { lumIpCompl 5 } lumIpBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v6 (3.1)." MODULE MANDATORY-GROUPS { ipGeneralGroupV5, ipIfGroup, ipRouteGroupV2, ospfGeneralGroup, ospfIfGroup, ospfNbrGroupV2 } ::= { lumIpCompl 6 } lumIpBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v7 (13.0)." MODULE MANDATORY-GROUPS { ipGeneralGroupV5, ipIfGroup, ipRouteGroupV2, ospfGeneralGroup, ospfIfGroupV2, ospfNbrGroupV2 } ::= { lumIpCompl 7 } lumIpBasicComplV8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v8 (27.0)." MODULE MANDATORY-GROUPS { ipGeneralGroupV6, ipIfGroup, ipRouteGroupV2, ospfGeneralGroup, ospfIfGroupV2, ospfNbrGroupV2 } ::= { lumIpCompl 8 } lumIpBasicComplV9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the IP MIB v9 (30.1)." MODULE MANDATORY-GROUPS { ipGeneralGroupV7, ipIfGroup, ipRouteGroupV2, ospfGeneralGroup, ospfIfGroupV2, ospfNbrGroupV2 } ::= { lumIpCompl 9 } lumIpBasicComplV10 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the IP MIB v10 (32.0)." MODULE MANDATORY-GROUPS { ipGeneralGroupV7, ipIfGroupV2, ipRouteGroupV2, ospfGeneralGroup, ospfIfGroupV2, ospfNbrGroupV2 } ::= { lumIpCompl 10 } END