LUM-BACKUP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, DisplayString, TestAndIncr, DateAndTime, TruthValue FROM SNMPv2-TC lumModules, lumBackupMIB FROM LUM-REG CommandString, FaultStatus FROM LUM-TC; lumBackupMIBModule MODULE-IDENTITY LAST-UPDATED "201712150000Z" -- Dec 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The backup MIB. - General - Locally stored configuration files - Command (only SNMP) " REVISION "201712150000Z" -- Dec 15th 2017 DESCRIPTION "Removed unused command loadConfigFile" REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "- Added sftp upload group - Added backup scheme attribute to backupGeneral - Changed ORGANIZATION and CONTACT-INFO" REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default operStatus to down." REVISION "200701110000Z" -- January 11th 2007 DESCRIPTION "Added minimal compliance and 'upload' to localhost." REVISION "200512050000Z" -- December 5th 2005 DESCRIPTION "Added backupUploadUploadNow and backupUploadStatus." REVISION "200412210000Z" -- December 21st 2004 DESCRIPTION "Added backup upload." REVISION "200412200000Z" -- December 20th 2004 DESCRIPTION "Added primary file name." REVISION "200411090000Z" -- November 9th 2004 DESCRIPTION "Added installConfigFile." REVISION "200410280000Z" -- October 28th 2004 DESCRIPTION "Added global state and configuration timestamps." REVISION "200409300000Z" -- September 30th 2004 DESCRIPTION "Added table size variables in backupGeneral." REVISION "200406170000Z" -- June 16th 2004 DESCRIPTION "Added unsaved changes flag in backupGeneral." REVISION "200210290000Z" -- October 29th 2002 DESCRIPTION "Command group is now implemented. Added configLastChange in accordance with other MIBs." REVISION "200110300000Z" -- October 30th 2001 DESCRIPTION "MIB verson and testAndIncr hidder, not supported yet. Command group hidden, not supported yet. Added lastChangeTime for the whole mib. Updated compliance accordingly" REVISION "200108160000Z" -- August 16th 2001 DESCRIPTION "Added backup command group." REVISION "200108010000Z" -- August 1st 2001 DESCRIPTION "The initial revision of this module." ::= { lumModules 7 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumBackupConfs OBJECT IDENTIFIER ::= { lumBackupMIB 1 } lumBackupGroups OBJECT IDENTIFIER ::= { lumBackupConfs 1 } lumBackupCompl OBJECT IDENTIFIER ::= { lumBackupConfs 2 } lumBackupMinimalGroups OBJECT IDENTIFIER ::= { lumBackupConfs 3 } lumBackupMinimalCompl OBJECT IDENTIFIER ::= { lumBackupConfs 4 } -- ---------------------------------------------------- -- Root for objects in the backup MIB -- ---------------------------------------------------- lumBackupMIBObjects OBJECT IDENTIFIER ::= { lumBackupMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- backupGeneral OBJECT IDENTIFIER ::= { lumBackupMIBObjects 1 } backupFileList OBJECT IDENTIFIER ::= { lumBackupMIBObjects 2 } backupCommand OBJECT IDENTIFIER ::= { lumBackupMIBObjects 3 } backupPersistentFileList OBJECT IDENTIFIER ::= { lumBackupMIBObjects 4 } backupUpload OBJECT IDENTIFIER ::= { lumBackupMIBObjects 5 } backupSftpUpload OBJECT IDENTIFIER ::= { lumBackupMIBObjects 6 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- backupGeneralTestAndIncr OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "Protection against simultaneous access from multiple managers. See SNMPv2-TC. " ::= { backupGeneral 1 } backupGeneralMibSpecVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB specification version. " DEFVAL { "" } ::= { backupGeneral 2 } backupGeneralMibImplVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB implementation version. " DEFVAL { "" } ::= { backupGeneral 3 } backupGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { backupGeneral 4 } backupGeneralConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { backupGeneral 5 } backupGeneralUnsavedChanges OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Set to true(1) if unsaved changes exists. " ::= { backupGeneral 6 } backupGeneralFileTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the configuration file table. " ::= { backupGeneral 7 } backupGeneralPersistentFileTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the persistent file list table. configuration file. " ::= { backupGeneral 8 } backupGeneralInstallConfigFile OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Install a new configuration file. The file can either be fetched from a remote server or installed from local directory. There are 3 cases: 1. Remote server. Give server addr and full path installConfigFile / installConfigFile 192.168.10.27/tftp/config.xml 2. From a local directory installConfigFile installConfigFile /root/config.xml 3. From the local download directory /tftpboot/downloaded installConfigFile installConfigFile config.xml The file will be installed as an deactivated configuration file, activate manually. " ::= { backupGeneral 9 } backupGeneralGlobalStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of any MIB in the node was last changed. " ::= { backupGeneral 10 } backupGeneralGlobalConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of any MIB in the node was last changed. " ::= { backupGeneral 11 } backupGeneralPrimaryFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the current primary configuration file. " ::= { backupGeneral 12 } backupGeneralWarnForUnsaved OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the warning for unsaved changes. disabled - warning is disabled. enabled - warning is enabled. " DEFVAL { enabled } ::= { backupGeneral 13 } backupGeneralWarnUnsavedDelay OBJECT-TYPE SYNTAX Unsigned32 (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how long time there must be unsaved changes before the warning is issued. " DEFVAL { 15 } ::= { backupGeneral 14 } backupGeneralUnsavedChangesAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration has not been saved for a specified numer of minutes. This function can be disabled, and it is possible to specify the delay how long time there must be unsaved changes, before the warning is issued. A(ctivation): When the configuration is changed and not saved for a specified number of minutes. D(e-activation): When the configuration is saved, or this alarm function is disabled. " ::= { backupGeneral 15 } backupGeneralSavedConfigurationGenerationId OBJECT-TYPE SYNTAX Unsigned32 (0.. 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "A counter that is incremented each time a backup is saved. " DEFVAL {0} ::= { backupGeneral 16 } backupGeneralBackupScheme OBJECT-TYPE SYNTAX INTEGER { tftp (1), sftp (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The selected backup transfer initiator. TFTP: The node element will act as a TFTP client, uploading the compressed backup entity file upon request to a specified TFTP server. (S)FTP: The node element will act as a SFTP server. It continuously compresses the backup files and makes the resulting backup entity file available for download by a network management system. NOTE: If SFTP is not available, the node will act as a FTP server instead. This attribute can be written via SNMP. " DEFVAL { tftp } ::= { backupGeneral 17 } -- ---------------------------------------------------- -- Backup file group -- ---------------------------------------------------- backupFileTable OBJECT-TYPE SYNTAX SEQUENCE OF BackupFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of saved configuration files." ::= { backupFileList 1 } backupFileEntry OBJECT-TYPE SYNTAX BackupFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the configuration file list. " INDEX { backupFileIndex } ::= { backupFileTable 1 } BackupFileEntry ::= SEQUENCE { backupFileIndex Unsigned32, backupFileName DisplayString, backupFileDescr DisplayString, backupFileLastChangeTime DateAndTime, backupFileAdminStatus INTEGER, backupFileOperStatus INTEGER, backupFileRowStatus RowStatus, backupFileUrl DisplayString } backupFileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration file. " ::= { backupFileEntry 1 } backupFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the configuration file. " ::= { backupFileEntry 2 } backupFileDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A user configurable descriptive text of the configuration file. " DEFVAL { "" } ::= { backupFileEntry 3 } backupFileLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the file was last changed. " ::= { backupFileEntry 4 } backupFileAdminStatus OBJECT-TYPE SYNTAX INTEGER { down (1), secondary (2), primary (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which configuration file will be used when loading the configuration. down - This configuration will not be loaded. secondary - This is the secondary configuration. primary - This is the primary configuration. Note: There can be only one primary and one secondary configuration file at any given time. " DEFVAL { primary } ::= { backupFileEntry 5 } backupFileOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), running (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which configuration file was most recently loaded. down - This configuration is not in use. running - This configuration was loaded most recently. " DEFVAL { down } ::= { backupFileEntry 6 } backupFileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: It is only possible to delete files. Creation is not supported. " ::= { backupFileEntry 7 } backupFileUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The full path indicating where the file can be found on the network element. " ::= { backupFileEntry 8 } -- ---------------------------------------------------- -- Backup command group -- ---------------------------------------------------- backupCommandName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the backup to be created. If set to the empty string the current configuration file is overwritten. This attribute can be written via SNMP. " DEFVAL { "" } ::= { backupCommand 1 } backupCommandDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The description for the backup to be created. This attribute can be written via SNMP. " DEFVAL { "" } ::= { backupCommand 2 } backupCommandAdminStatus OBJECT-TYPE SYNTAX INTEGER { down (1), secondary (2), primary (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The adminStatus for the backup to be created. See also backupFileAdminStatus. This attribute can be written via SNMP. " DEFVAL { primary } ::= { backupCommand 3 } backupCommandAction OBJECT-TYPE SYNTAX INTEGER { idle (1), saveTofile (2), busy (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiates the backup. idle - No backup in progress. saveTofile - Write backup to local persistent storage. busy - Backup function is busy This attribute can be written via SNMP. " DEFVAL { idle } ::= { backupCommand 4 } backupCommandResult OBJECT-TYPE SYNTAX INTEGER { idle (1), success (2), failed (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the most recent backup. " ::= { backupCommand 5 } -- ---------------------------------------------------- -- Backup upload group -- ---------------------------------------------------- backupUploadServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for the backup server. Backups are transferred using TFTP. Setting the address to 127.0.0.1 (local host) will only create the file locally; does not attempt to transfer i to the backup server. Transfers are disabled if the address is set to 0.0.0.0. This attribute can be written via SNMP. " ::= { backupUpload 1 } backupUploadServerPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination path on the backup server. The configuration package will be written to the following filename. /backup_.zip where path is the destination path and IP address is the numerical IP address with '.'s replaced with '_'s. For example: /tftpboot/backup_192_168_10_101.zip This attribute can be written via SNMP. " DEFVAL { "/upload" } ::= { backupUpload 2 } backupUploadTimeHour OBJECT-TYPE SYNTAX Unsigned32 (0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "The hour during which backups are transferred. The transfer is scheduled at a random time during the hour. This attribute can be written via SNMP. " DEFVAL { 23 } ::= { backupUpload 3 } backupUploadAction OBJECT-TYPE SYNTAX INTEGER { idle (1), pending (2), upload (3), busy (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiates the backup. idle - No backup pending or in progress. pending - An upload will be performed at the next time. upload - Activate upload immediately. busy - Backup function is busy. This attribute can be written via SNMP. " DEFVAL { idle } ::= { backupUpload 4 } backupUploadResult OBJECT-TYPE SYNTAX INTEGER { idle (1), success (2), failed (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the most recent backup upload. " ::= { backupUpload 5 } backupUploadLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when a successful upload was last performed. " ::= { backupUpload 6 } backupUploadFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent configuration upload failed. A(ctivation): When the upload fails. D(e-activation): When the upload succeeds or when the upload is disabled (address set to 0.0.0.0). " ::= { backupUpload 7 } backupUploadNextTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the next upload attempt will be made. " ::= { backupUpload 8 } backupUploadInstallUploadFile OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Installs an upload file. Includes the following files: - Configuration file - SNMP agent configuration - Local user database The file can either be fetched from a remote server or installed from local directory. There are 3 cases: 1. Remote server. Give server addr and full path installUploadFile / installUploadFile 192.168.10.27/tftp/backup_192_168_10_101.zip 2. From a local directory installUploadFile installUploadFile /root/backup_192_168_10_101.zip 3. From the local download directory /tftpboot/downloaded installUploadFile installUploadFile backup_192_168_10_101.zip Note: The configuration file is installed as primary.xml, it will not overwrite an existing file with the same name. " ::= { backupUpload 9 } backupUploadStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), pending (2), busy (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Upload function status. idle - No backup pending or in progress. pending - An upload will be performed at the next time. busy - The function is busy. " DEFVAL { idle } ::= { backupUpload 10 } backupUploadUploadNow OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Triggers an (almost) immediate upload attempt. " ::= { backupUpload 11 } backupUploadLocalFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The local file name for the configuration package. " DEFVAL { "" } ::= { backupUpload 12 } -- ---------------------------------------------------- -- Backup sftp upload group -- ---------------------------------------------------- backupSftpUploadBackupEntityAvailability OBJECT-TYPE SYNTAX INTEGER { available (1), availableOutdated (2), notAvailable (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The availability of the compressed backup entity file. available: The compressed backup entity file is available and contains the latest changes written to the backup files. availableOutdated: The compressed backup entity file is available but does not contains the latest changes written to the backup files. notAvailable: Either there is no compressed backup entity file available or a new backup entity file is currently being compressed. " DEFVAL { notAvailable } ::= { backupSftpUpload 1 } backupSftpUploadBackupEntityCompressionTimestamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The unix timestamp of the last successful compression of the backup files. " ::= { backupSftpUpload 2 } backupSftpUploadBackupEntityCrc OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A 32 bit CRC checksum of the backup entity file. " ::= { backupSftpUpload 3 } backupSftpUploadRestoreEntityAction OBJECT-TYPE SYNTAX INTEGER { ready (1), busy (2), restoreNow (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiates the restore of the backup entity file pointed out by the 'Restore entity file path' attribute. Administrator privileges are required to perform a restore procedure. " DEFVAL { ready } ::= { backupSftpUpload 5 } backupSftpUploadBackupEntityFilePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The absolute path of the backup entity file. " ::= { backupSftpUpload 6 } backupSftpUploadRestoreEntityFilePath OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "The absolute path of the restore entity file. This file will be removed when a restore procedure is performed. Administrator privileges are required to modify this path. " ::= { backupSftpUpload 7 } backupSftpUploadRestoreEntityRestoreNow OBJECT-TYPE SYNTAX INTEGER { normal (1), restore (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restore from backup. Includes the following files: - Configuration file - SNMP agent configuration - Local user database The backup file is fetched from the location pointed out by restoreEntityFilePath attribute. Note: The configuration file is installed as primary.xml, it will not overwrite an existing file with the same name. " ::= { backupSftpUpload 8 } -- ---------------------------------------------------- -- Backup persistent files group -- ---------------------------------------------------- backupPersistentFileTable OBJECT-TYPE SYNTAX SEQUENCE OF BackupPersistentFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of available persistent files." ::= { backupPersistentFileList 1 } backupPersistentFileEntry OBJECT-TYPE SYNTAX BackupPersistentFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the persistent file list. " INDEX { backupPersistentFileIndex } ::= { backupPersistentFileTable 1 } BackupPersistentFileEntry ::= SEQUENCE { backupPersistentFileIndex Unsigned32, backupPersistentFileName DisplayString, backupPersistentFileDescr DisplayString } backupPersistentFileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration file. " ::= { backupPersistentFileEntry 1 } backupPersistentFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The file name of the persistent file. " ::= { backupPersistentFileEntry 2 } backupPersistentFileDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A user configurable descriptive text of the configuration file. " ::= { backupPersistentFileEntry 3 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- backupGeneralGroup OBJECT-GROUP OBJECTS { backupGeneralTestAndIncr, backupGeneralMibSpecVersion, backupGeneralMibImplVersion } STATUS deprecated DESCRIPTION "The backup general objects." ::= { lumBackupGroups 1 } backupFileGroup OBJECT-GROUP OBJECTS { backupFileIndex, backupFileName, backupFileDescr, backupFileLastChangeTime, backupFileAdminStatus, backupFileOperStatus, backupFileRowStatus } STATUS deprecated DESCRIPTION "The backup file objects." ::= { lumBackupGroups 2 } backupCommandGroup OBJECT-GROUP OBJECTS { backupCommandName, backupCommandDescr, backupCommandAdminStatus, backupCommandAction, backupCommandResult } STATUS current DESCRIPTION "The backup command objects." ::= { lumBackupGroups 3 } backupGeneralGroupV2 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime } STATUS deprecated DESCRIPTION "The backup general objects v2." ::= { lumBackupGroups 4 } backupGeneralGroupV3 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime } STATUS deprecated DESCRIPTION "The backup general objects v3." ::= { lumBackupGroups 5 } backupPersistentFileGroup OBJECT-GROUP OBJECTS { backupPersistentFileIndex, backupPersistentFileName, backupPersistentFileDescr } STATUS current DESCRIPTION "The backup persistent file objects." ::= { lumBackupGroups 6 } backupFileGroupV2 OBJECT-GROUP OBJECTS { backupFileIndex, backupFileName, backupFileDescr, backupFileLastChangeTime, backupFileAdminStatus, backupFileOperStatus, backupFileRowStatus, backupFileUrl } STATUS current DESCRIPTION "The backup file objects v2." ::= { lumBackupGroups 7 } backupGeneralGroupV4 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges } STATUS deprecated DESCRIPTION "The backup general objects v4." ::= { lumBackupGroups 8 } backupGeneralGroupV5 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges, backupGeneralFileTableSize, backupGeneralPersistentFileTableSize, backupGeneralInstallConfigFile, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime, backupGeneralPrimaryFileName } STATUS deprecated DESCRIPTION "The backup general objects v5." ::= { lumBackupGroups 9 } backupUploadGroup OBJECT-GROUP OBJECTS { backupUploadServerAddr, backupUploadServerPath, backupUploadTimeHour, backupUploadAction, backupUploadResult, backupUploadLastChangeTime, backupUploadFailure, backupUploadNextTime, backupUploadInstallUploadFile } STATUS deprecated DESCRIPTION "The backup upload objects." ::= { lumBackupGroups 10 } backupGeneralGroupV6 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges, backupGeneralFileTableSize, backupGeneralPersistentFileTableSize, backupGeneralInstallConfigFile, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime, backupGeneralPrimaryFileName, backupGeneralWarnForUnsaved, backupGeneralWarnUnsavedDelay, backupGeneralUnsavedChangesAlarm } STATUS deprecated DESCRIPTION "The backup general objects v6 (5.0)." ::= { lumBackupGroups 11 } backupUploadGroupV2 OBJECT-GROUP OBJECTS { backupUploadServerAddr, backupUploadServerPath, backupUploadTimeHour, backupUploadAction, backupUploadResult, backupUploadLastChangeTime, backupUploadFailure, backupUploadNextTime, backupUploadInstallUploadFile } STATUS current DESCRIPTION "The backup upload objects v2 (5.0)." ::= { lumBackupGroups 12 } backupUploadGroupV3 OBJECT-GROUP OBJECTS { backupUploadServerAddr, backupUploadServerPath, backupUploadTimeHour, backupUploadAction, backupUploadResult, backupUploadLastChangeTime, backupUploadFailure, backupUploadNextTime, backupUploadInstallUploadFile, backupUploadUploadNow, backupUploadStatus, backupUploadLocalFile } STATUS current DESCRIPTION "The backup upload objects v3 (8.0)." ::= { lumBackupGroups 13 } backupGeneralGroupV7 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges, backupGeneralFileTableSize, backupGeneralPersistentFileTableSize, backupGeneralInstallConfigFile, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime, backupGeneralPrimaryFileName, backupGeneralWarnForUnsaved, backupGeneralWarnUnsavedDelay, backupGeneralUnsavedChangesAlarm, backupGeneralSavedConfigurationGenerationId } STATUS deprecated DESCRIPTION "The backup general objects v7 (12.0)." ::= { lumBackupGroups 14 } backupGeneralGroupV8 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges, backupGeneralFileTableSize, backupGeneralPersistentFileTableSize, backupGeneralInstallConfigFile, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime, backupGeneralPrimaryFileName, backupGeneralWarnForUnsaved, backupGeneralWarnUnsavedDelay, backupGeneralUnsavedChangesAlarm, backupGeneralSavedConfigurationGenerationId, backupGeneralBackupScheme } STATUS deprecated DESCRIPTION "The backup general objects v8 (29.0)." ::= { lumBackupGroups 15 } backupSftpUploadGroup OBJECT-GROUP OBJECTS { backupSftpUploadBackupEntityAvailability, backupSftpUploadBackupEntityCompressionTimestamp, backupSftpUploadBackupEntityCrc, backupSftpUploadRestoreEntityAction, backupSftpUploadBackupEntityFilePath, backupSftpUploadRestoreEntityFilePath} STATUS deprecated DESCRIPTION "The backup sftp upload objects (29.0)" ::= { lumBackupGroups 16 } backupGeneralGroupV9 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralUnsavedChanges, backupGeneralFileTableSize, backupGeneralPersistentFileTableSize, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime, backupGeneralPrimaryFileName, backupGeneralWarnForUnsaved, backupGeneralWarnUnsavedDelay, backupGeneralUnsavedChangesAlarm, backupGeneralSavedConfigurationGenerationId, backupGeneralBackupScheme } STATUS current DESCRIPTION "The backup general objects v9 (30.0)." ::= { lumBackupGroups 17 } backupSftpUploadGroupV2 OBJECT-GROUP OBJECTS { backupSftpUploadBackupEntityAvailability, backupSftpUploadBackupEntityCompressionTimestamp, backupSftpUploadBackupEntityCrc, backupSftpUploadRestoreEntityAction, backupSftpUploadBackupEntityFilePath, backupSftpUploadRestoreEntityFilePath, backupSftpUploadRestoreEntityRestoreNow} STATUS current DESCRIPTION "The backup sftp upload objects (30.0)" ::= { lumBackupGroups 18 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumBackupBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v1." MODULE MANDATORY-GROUPS { backupGeneralGroup, backupFileGroup, backupCommandGroup } ::= { lumBackupCompl 1 } lumBackupBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v2." MODULE MANDATORY-GROUPS { backupGeneralGroupV2, backupFileGroup } ::= { lumBackupCompl 2 } lumBackupBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v3." MODULE MANDATORY-GROUPS { backupGeneralGroupV3, backupFileGroup, backupCommandGroup } ::= { lumBackupCompl 3 } lumBackupBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v4." MODULE MANDATORY-GROUPS { backupGeneralGroupV3, backupFileGroup, backupCommandGroup, backupPersistentFileGroup } ::= { lumBackupCompl 4 } lumBackupBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v5." MODULE MANDATORY-GROUPS { backupGeneralGroupV3, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup } ::= { lumBackupCompl 5 } lumBackupBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v6." MODULE MANDATORY-GROUPS { backupGeneralGroupV4, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup } ::= { lumBackupCompl 6 } lumBackupBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v7 3.1." MODULE MANDATORY-GROUPS { backupGeneralGroupV5, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroup } ::= { lumBackupCompl 7 } lumBackupBasicComplV8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v8 4.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV5, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroup } ::= { lumBackupCompl 8 } lumBackupBasicComplV9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v9 5.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV6, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV2 } ::= { lumBackupCompl 9 } lumBackupBasicComplV10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v10 8.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV6, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV3 } ::= { lumBackupCompl 10 } lumBackupBasicComplV11 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v11 12.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV7, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV3 } ::= { lumBackupCompl 11 } lumBackupBasicComplV12 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v12 29.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV8, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV3, backupSftpUploadGroup} ::= { lumBackupCompl 12 } lumBackupBasicComplV13 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the backup MIB v13 30.0." MODULE MANDATORY-GROUPS { backupGeneralGroupV9, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV3, backupSftpUploadGroupV2} ::= { lumBackupCompl 13 } lumBackupBasicComplV14 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the backup MIB v14 (30.1)." MODULE MANDATORY-GROUPS { backupGeneralGroupV9, backupFileGroupV2, backupCommandGroup, backupPersistentFileGroup, backupUploadGroupV3, backupSftpUploadGroupV2} ::= { lumBackupCompl 14 } -- ---------------------------------------------------- -- Minimal object and event groups -- ---------------------------------------------------- backupGeneralMinimalGroupV1 OBJECT-GROUP OBJECTS { backupGeneralLastChangeTime, backupGeneralConfigLastChangeTime, backupGeneralGlobalStateLastChangeTime, backupGeneralGlobalConfigLastChangeTime } STATUS current DESCRIPTION "The backup general minimal objects v1 (5.0)." ::= { lumBackupMinimalGroups 1 } backupUploadMinimalGroupV1 OBJECT-GROUP OBJECTS { backupUploadServerAddr, backupUploadTimeHour, backupUploadAction, backupUploadResult, backupUploadLastChangeTime, backupUploadFailure, backupUploadNextTime, backupUploadLocalFile } STATUS current DESCRIPTION "The backup upload minimal objects v1 (8.0)." ::= { lumBackupMinimalGroups 2 } backupSftpUploadMinimalGroupV1 OBJECT-GROUP OBJECTS { backupSftpUploadBackupEntityAvailability, backupSftpUploadBackupEntityCompressionTimestamp, backupSftpUploadBackupEntityCrc, backupSftpUploadRestoreEntityAction, backupSftpUploadBackupEntityFilePath, backupSftpUploadRestoreEntityFilePath} STATUS deprecated DESCRIPTION "The backup upload minimal objects v1 (29.0)." ::= { lumBackupMinimalGroups 3 } backupSftpUploadMinimalGroupV2 OBJECT-GROUP OBJECTS { backupSftpUploadBackupEntityAvailability, backupSftpUploadBackupEntityCompressionTimestamp, backupSftpUploadBackupEntityCrc, backupSftpUploadRestoreEntityAction, backupSftpUploadBackupEntityFilePath, backupSftpUploadRestoreEntityFilePath, backupSftpUploadRestoreEntityRestoreNow} STATUS current DESCRIPTION "The backup upload minimal objects v2 (30.0)." ::= { lumBackupMinimalGroups 4 } -- ---------------------------------------------------- -- Minimal Compliance -- ---------------------------------------------------- lumBackupMinimalComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the backup MIB v1" MODULE MANDATORY-GROUPS { backupGeneralMinimalGroupV1, backupUploadMinimalGroupV1} ::= { lumBackupMinimalCompl 1 } lumBackupMinimalComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the backup MIB v2" MODULE MANDATORY-GROUPS { backupGeneralMinimalGroupV1, backupUploadMinimalGroupV1, backupSftpUploadMinimalGroupV1} ::= { lumBackupMinimalCompl 2 } lumBackupMinimalComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the backup MIB v3" MODULE MANDATORY-GROUPS { backupGeneralMinimalGroupV1, backupUploadMinimalGroupV1, backupSftpUploadMinimalGroupV2} ::= { lumBackupMinimalCompl 3 } lumBackupMinimalComplV4 MODULE-COMPLIANCE STATUS current DESCRIPTION "Minimal implementation requirements for the backup MIB v4 (30.1)" MODULE MANDATORY-GROUPS { backupGeneralMinimalGroupV1, backupUploadMinimalGroupV1, backupSftpUploadMinimalGroupV2} ::= { lumBackupMinimalCompl 4 } END