-- ***************************************************************** -- RBN-DHCP-MIB Redback DHCP Mib -- -- Copyright (c) 2004-2005 RedBack Networks, Inc. -- All rights reserved. -- -- ***************************************************************** RBN-DHCP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, IpAddress FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB RbnSlot FROM RBN-TC rbnMgmt FROM RBN-SMI; rbnDhcpMib MODULE-IDENTITY LAST-UPDATED "201003101700Z" -- Mar 10, 2010 ORGANIZATION "Redback Networks, Inc." CONTACT-INFO " RedBack Networks, Inc. Postal: 300 Holger Way San Jose, CA 95134-1362 USA Phone: +1 408 750 5000 Fax: +1 408 750 5599 E-mail: mib-info@redback.com" DESCRIPTION "Defines the objects necessary to obtain information about DHCP Servers for interfaces within a context." REVISION "201003101700Z" -- Mar 10, 2010 DESCRIPTION "Added rbnDhcpLeaseFileStorageSlot, rbnDhcpLeaseFileErrorType, and rbnDhcpLeaseFileFailure." REVISION "200510141700Z" -- Oct 14, 2005 DESCRIPTION "Added new rbnDhcpRangeThresholdTable table." REVISION "200405031700Z" -- May 3, 2004 DESCRIPTION "Initial version." ::= { rbnMgmt 30 } rbnDhcpMIBNotifications OBJECT IDENTIFIER ::= { rbnDhcpMib 0 } rbnDhcpMIBObjects OBJECT IDENTIFIER ::= { rbnDhcpMib 1 } rbnDhcpMIBConformance OBJECT IDENTIFIER ::= { rbnDhcpMib 2 } rbnDhcpIntfThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF RbnDhcpIntfThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The purpose of this table is to allow monitoring of per interface DHCP server thresholds through SNMP. This table contains the objects which characterize DHCP server thresholds. Each row in the table corresponds to information about the leases in a DHCP server range for a particular interface and the corresponding capacity, usage and falling and rising thresholds. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3)." ::= { rbnDhcpMIBObjects 1 } rbnDhcpIntfThresholdEntry OBJECT-TYPE SYNTAX RbnDhcpIntfThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the rbnDhcpIntfThresholdTable." INDEX { IMPLIED rbnDhcpIntfThresholdName } ::= { rbnDhcpIntfThresholdTable 1 } RbnDhcpIntfThresholdEntry ::= SEQUENCE { rbnDhcpIntfThresholdName SnmpAdminString, rbnDhcpIntfThresholdContextName SnmpAdminString, rbnDhcpIntfThresholdSize Unsigned32, rbnDhcpIntfThresholdAvailable Unsigned32, rbnDhcpIntfThresholdInuse Unsigned32, rbnDhcpIntfThresholdFallingThreshold Unsigned32, rbnDhcpIntfThresholdFallingSendTrap TruthValue, rbnDhcpIntfThresholdFallingLogMessage TruthValue, rbnDhcpIntfThresholdRisingThreshold Unsigned32, rbnDhcpIntfThresholdRisingSendTrap TruthValue, rbnDhcpIntfThresholdRisingLogMessage TruthValue } rbnDhcpIntfThresholdName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the interface. An entry configured by other means may have been given a name whose length is greater than 80. Names which exceed this length are not accessible via SNMP operations." ::= { rbnDhcpIntfThresholdEntry 1 } rbnDhcpIntfThresholdContextName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the context which contains the interface." ::= { rbnDhcpIntfThresholdEntry 2 } rbnDhcpIntfThresholdSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that have been reserved for the DHCP server in this interface." ::= { rbnDhcpIntfThresholdEntry 3 } rbnDhcpIntfThresholdAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that are available in this interface." ::= { rbnDhcpIntfThresholdEntry 4 } rbnDhcpIntfThresholdInuse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that are in use in this interface." ::= { rbnDhcpIntfThresholdEntry 5 } rbnDhcpIntfThresholdFallingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The falling threshold is a value which specifies that any enabled falling threshold events are to be generated when the value of the currently available leases drops to the falling threshold value via an allocation of a lease from the pool. The number of available leases is reported in rbnDhcpIntfThresholdAvailable. A falling threshold event is either a notification or a log message or both. Falling threshold events are enabled if either or both of rbnDhcpIntfThresholdFallingSendTrap and rbnDhcpIntfThresholdFallingLogMessage are true. Note, this is a falling threshold, so a falling threshold event will only be triggered on a transition of the value of rbnDhcpIntfThresholdAvailable dropping from (rbnDhcpIntfThresholdFallingThreshold+1) to rbnDhcpIntfThresholdFallingThreshold." ::= { rbnDhcpIntfThresholdEntry 6 } rbnDhcpIntfThresholdFallingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a falling threshold, a trap will be sent. See the definition of the rbnDhcpIntfThresholdFallingThresholdMet notification for the information included in the trap." ::= { rbnDhcpIntfThresholdEntry 7 } rbnDhcpIntfThresholdFallingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a falling threshold, a message will be logged. See the definition of the rbnDhcpIntfThresholdFallingThresholdMet notification for the information included in the trap." ::= { rbnDhcpIntfThresholdEntry 8 } rbnDhcpIntfThresholdRisingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The rising threshold is a value which specifies that any enabled rising threshold events are to be generated when the value of the currently available leases reaches the rising threshold value via a returning of a lease to the pool. The number of available leases is reported in rbnDhcpIntfThresholdAvailable. A rising threshold event is either a notification or a log message or both. Rising threshold events are enabled if either or both of rbnDhcpIntfThresholdRisingSendTrap and rbnDhcpIntfThresholdRisingLogMessage are true. Note, this is a rising threshold, so a rising threshold event will only be triggered on a transition of the value of rbnDhcpIntfThresholdAvailable increasing from (rbnDhcpIntfThresholdRisingThreshold-1) to rbnDhcpIntfThresholdRisingThreshold." ::= { rbnDhcpIntfThresholdEntry 9 } rbnDhcpIntfThresholdRisingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a rising threshold, a trap will be sent. See the definition of the rbnDhcpIntfThresholdRisingThresholdMet notification for the information included in the trap." ::= { rbnDhcpIntfThresholdEntry 10 } rbnDhcpIntfThresholdRisingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a rising threshold, a message will be logged. See the definition of the rbnDhcpIntfThresholdRisingThresholdMet notification for the information included in the trap." ::= { rbnDhcpIntfThresholdEntry 11 } rbnDhcpRangeThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF RbnDhcpRangeThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The purpose of this table is to allow monitoring of DHCP server ranges within interfaces. This table contains the objects which characterize DHCP server ranges. Each row in the table corresponds to information about the leases in a DHCP server for a particular range within a particular interface and the corresponding capacity, usage and falling and rising thresholds. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3)." ::= { rbnDhcpMIBObjects 3 } rbnDhcpRangeThresholdEntry OBJECT-TYPE SYNTAX RbnDhcpRangeThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the rbnDhcpRangeThresholdTable." INDEX { rbnDhcpRangeThresholdInterfaceIdx, rbnDhcpRangeThresholdAddr } ::= { rbnDhcpRangeThresholdTable 1 } RbnDhcpRangeThresholdEntry ::= SEQUENCE { rbnDhcpRangeThresholdInterfaceIdx Unsigned32, rbnDhcpRangeThresholdAddr IpAddress, rbnDhcpRangeThresholdEndAddr IpAddress, rbnDhcpRangeThresholdContextName SnmpAdminString, rbnDhcpRangeThresholdInterfaceName SnmpAdminString, rbnDhcpRangeThresholdSize Unsigned32, rbnDhcpRangeThresholdAvailable Unsigned32, rbnDhcpRangeThresholdInuse Unsigned32, rbnDhcpRangeThresholdFallingThreshold Unsigned32, rbnDhcpRangeThresholdFallingSendTrap TruthValue, rbnDhcpRangeThresholdFallingLogMessage TruthValue, rbnDhcpRangeThresholdRisingThreshold Unsigned32, rbnDhcpRangeThresholdRisingSendTrap TruthValue, rbnDhcpRangeThresholdRisingLogMessage TruthValue } rbnDhcpRangeThresholdInterfaceIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface containing the DHCP range." ::= { rbnDhcpRangeThresholdEntry 1 } rbnDhcpRangeThresholdAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The start address of the DHCP range." ::= { rbnDhcpRangeThresholdEntry 2 } rbnDhcpRangeThresholdEndAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The end address of the DHCP range." ::= { rbnDhcpRangeThresholdEntry 3 } rbnDhcpRangeThresholdContextName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the context which contains the interface." ::= { rbnDhcpRangeThresholdEntry 4 } rbnDhcpRangeThresholdInterfaceName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface containing the DHCP range." ::= { rbnDhcpRangeThresholdEntry 5 } rbnDhcpRangeThresholdSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that have been reserved for the DHCP server in this range." ::= { rbnDhcpRangeThresholdEntry 6 } rbnDhcpRangeThresholdAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that are available in this range." ::= { rbnDhcpRangeThresholdEntry 7 } rbnDhcpRangeThresholdInuse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of leases that are in use in this range." ::= { rbnDhcpRangeThresholdEntry 8 } rbnDhcpRangeThresholdFallingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The falling threshold is a value which specifies that any enabled falling threshold events are to be generated when the value of the currently available leases drops to the falling threshold value via an allocation of a lease from the range. The number of available leases is reported in rbnDhcpRangeThresholdAvailable. A falling threshold event is either a notification or a log message or both. Falling threshold events are enabled if either or both of rbnDhcpRangeThresholdFallingSendTrap and rbnDhcpRangeThresholdFallingLogMessage are true. Note, this is a falling threshold, so a falling threshold event will only be triggered on a transition of the value of rbnDhcpRangeThresholdAvailable dropping from (rbnDhcpRangeThresholdFallingThreshold+1) to rbnDhcpRangeThresholdFallingThreshold." ::= { rbnDhcpRangeThresholdEntry 9 } rbnDhcpRangeThresholdFallingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a falling threshold, a trap will be sent. See the definition of the rbnDhcpRangeThresholdFallingThresholdMet notification for the information included in the trap." ::= { rbnDhcpRangeThresholdEntry 10 } rbnDhcpRangeThresholdFallingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a falling threshold, a message will be logged. See the definition of the rbnDhcpRangeThresholdFallingThresholdMet notification for the information included in the trap." ::= { rbnDhcpRangeThresholdEntry 11 } rbnDhcpRangeThresholdRisingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The rising threshold is a value which specifies that any enabled rising threshold events are to be generated when the value of the currently available leases reaches the rising threshold value via a returning of a lease to the range. The number of available leases is reported in rbnDhcpRangeThresholdAvailable. A rising threshold event is either a notification or a log message or both. Rising threshold events are enabled if either or both of rbnDhcpRangeThresholdRisingSendTrap and rbnDhcpRangeThresholdRisingLogMessage are true. Note, this is a rising threshold, so a rising threshold event will only be triggered on a transition of the value of rbnDhcpRangeThresholdAvailable increasing from (rbnDhcpRangeThresholdRisingThreshold-1) to rbnDhcpRangeThresholdRisingThreshold." ::= { rbnDhcpRangeThresholdEntry 12 } rbnDhcpRangeThresholdRisingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a rising threshold, a trap will be sent. See the definition of the rbnDhcpRangeThresholdRisingThresholdMet notification for the information included in the trap." ::= { rbnDhcpRangeThresholdEntry 13 } rbnDhcpRangeThresholdRisingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching a rising threshold, a message will be logged. See the definition of the rbnDhcpRangeThresholdRisingThresholdMet notification for the information included in the trap." ::= { rbnDhcpRangeThresholdEntry 14 } -- -- DHCP Threshold per context objects -- rbnDhcpCtxThreshold OBJECT IDENTIFIER ::= { rbnDhcpMIBObjects 2 } rbnDhcpCtxThresholdName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..63)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object identifies the context in which a falling or rising per context threshold event occurs" ::= { rbnDhcpCtxThreshold 1 } rbnDhcpCtxThresholdSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of leases in all DHCP ranges of all interfaces in the context valid in the current view." ::= { rbnDhcpCtxThreshold 2 } rbnDhcpCtxThresholdAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of leases available in all DHCP ranges of all interfaces in the context valid in the current view." ::= { rbnDhcpCtxThreshold 3 } rbnDhcpCtxThresholdInuse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of leases in use in all DHCP ranges of all interfaces in the context valid in the current view." ::= { rbnDhcpCtxThreshold 4 } rbnDhcpCtxThresholdFallingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The falling threshold value for the context valid in the current view. Just as rbnDhcpIntfThresholdFallingThreshold is the per interface falling threshold, this object is the per context falling threshold. When the sum of the all available DHCP leases in all interfaces of the context valid in the current view reaches the value of this object a falling threshold action of a trap, a log message, or both will be generated. This is a falling threshold, so the evaluation of whether to perform the action occurs upon allocation of a lease from the available pool of leases from any interface within the context. The action of whether to send a trap and/or log message is specified by the values of rbnDhcpCtxThresholdFallingSendTrap and rbnDhcpCtxThresholdFallingLogMessage. If there is no per context rising threshold, the value of this object will be zero and the values of rbnDhcpCtxThresholdFallingSendTrap and rbnDhcpCtxThresholdFallingLogMessage will be false." ::= { rbnDhcpCtxThreshold 5 } rbnDhcpCtxThresholdFallingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching the per context falling threshold, a trap will be sent. See the definition of the rbnDhcpCtxThresholdFallingThresholdMet for the information included in the trap." ::= { rbnDhcpCtxThreshold 6 } rbnDhcpCtxThresholdFallingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching the per context falling threshold, a message will be logged. The information contained in the message logged is the same as that included in the rbnDhcpCtxThresholdFallingThresholdMet trap." ::= { rbnDhcpCtxThreshold 7 } rbnDhcpCtxThresholdRisingThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..196608) MAX-ACCESS read-only STATUS current DESCRIPTION "The rising threshold value for the context valid in the current view. Just as rbnDhcpIntfThresholdRisingThreshold is the per interface rising threshold, this object is the per context rising threshold. When the sum of the all available DHCP leases in all interfaces of the context valid in the current view reaches the value of this object a rising threshold action of a trap, a log message, or both will be generated. This is a rising threshold, so the evaluation of whether to perform the action occurs upon return of a lease to the available pool of leases defined in any interface within the context. The action of whether to send a trap and/or log message is specified by the values of rbnDhcpCtxThresholdRisingSendTrap and rbnDhcpCtxThresholdRisingLogMessage. If there is no per context rising threshold, the value of this object will be zero and the values of rbnDhcpCtxThresholdRisingSendTrap and rbnDhcpCtxThresholdRisingLogMessage will be false." ::= { rbnDhcpCtxThreshold 8 } rbnDhcpCtxThresholdRisingSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching the per context rising threshold, a trap will be sent. See the definition of the rbnDhcpCtxThresholdRisingThresholdMet for the information included in the trap." ::= { rbnDhcpCtxThreshold 9 } rbnDhcpCtxThresholdRisingLogMessage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, upon detection of reaching the per context rising threshold, a message will be logged. The information contained in the message logged is the same as that included in the rbnDhcpCtxThresholdRisingThresholdMet trap." ::= { rbnDhcpCtxThreshold 10 } -- -- Definition of notifications. -- rbnDhcpLeaseFileStorageSlot OBJECT-TYPE SYNTAX RbnSlot MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The slot number of the storage device containing the DHCP lease file." ::= { rbnDhcpMIBObjects 4 } rbnDhcpLeaseFileErrorType OBJECT-TYPE SYNTAX INTEGER { storageDeviceDegraded (1), storageDeviceFailed (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Error types of DHCP lease file failure." ::= { rbnDhcpMIBObjects 5 } rbnDhcpIntfThresholdFallingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpIntfThresholdContextName, rbnDhcpIntfThresholdAvailable, rbnDhcpIntfThresholdFallingThreshold } STATUS current DESCRIPTION "A notification indicating that a per interface falling threshold has been reached." ::= { rbnDhcpMIBNotifications 1 } rbnDhcpIntfThresholdRisingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpIntfThresholdContextName, rbnDhcpIntfThresholdAvailable, rbnDhcpIntfThresholdRisingThreshold } STATUS current DESCRIPTION "A notification indicating that a per interface rising threshold has been reached." ::= { rbnDhcpMIBNotifications 2 } rbnDhcpCtxThresholdFallingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpCtxThresholdName, rbnDhcpCtxThresholdAvailable, rbnDhcpCtxThresholdFallingThreshold } STATUS current DESCRIPTION "A notification indicating that the per context falling threshold has been reached." ::= { rbnDhcpMIBNotifications 3 } rbnDhcpCtxThresholdRisingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpCtxThresholdName, rbnDhcpCtxThresholdAvailable, rbnDhcpCtxThresholdRisingThreshold } STATUS current DESCRIPTION "A notification indicating that the per context rising threshold has been reached." ::= { rbnDhcpMIBNotifications 4 } rbnDhcpRangeThresholdFallingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpRangeThresholdContextName, rbnDhcpRangeThresholdInterfaceName, rbnDhcpRangeThresholdEndAddr, rbnDhcpRangeThresholdAvailable, rbnDhcpRangeThresholdFallingThreshold } STATUS current DESCRIPTION "A notification indicating that a per subnet falling threshold has been reached." ::= { rbnDhcpMIBNotifications 5 } rbnDhcpRangeThresholdRisingThresholdMet NOTIFICATION-TYPE OBJECTS { rbnDhcpRangeThresholdContextName, rbnDhcpRangeThresholdInterfaceName, rbnDhcpRangeThresholdEndAddr, rbnDhcpRangeThresholdAvailable, rbnDhcpRangeThresholdRisingThreshold } STATUS current DESCRIPTION "A notification indicating that a per subnet rising threshold has been reached." ::= { rbnDhcpMIBNotifications 6 } rbnDhcpLeaseFileFailure NOTIFICATION-TYPE OBJECTS { rbnDhcpLeaseFileStorageSlot, rbnDhcpLeaseFileErrorType } STATUS current DESCRIPTION "A notification indicating that the system has stopped reading/updating the DHCP lease file." ::= { rbnDhcpMIBNotifications 7 } -- -- Compliance statements. -- rbnDhcpCompliances OBJECT IDENTIFIER ::= { rbnDhcpMIBConformance 1 } rbnDhcpGroups OBJECT IDENTIFIER ::= { rbnDhcpMIBConformance 2 } rbnDhcpThresholdGroup OBJECT-GROUP OBJECTS { rbnDhcpIntfThresholdContextName, rbnDhcpIntfThresholdSize, rbnDhcpIntfThresholdInuse, rbnDhcpIntfThresholdAvailable, rbnDhcpIntfThresholdFallingThreshold, rbnDhcpIntfThresholdFallingSendTrap, rbnDhcpIntfThresholdFallingLogMessage, rbnDhcpIntfThresholdRisingThreshold, rbnDhcpIntfThresholdRisingSendTrap, rbnDhcpIntfThresholdRisingLogMessage, rbnDhcpCtxThresholdName, rbnDhcpCtxThresholdSize, rbnDhcpCtxThresholdAvailable, rbnDhcpCtxThresholdInuse, rbnDhcpCtxThresholdFallingThreshold, rbnDhcpCtxThresholdFallingSendTrap, rbnDhcpCtxThresholdFallingLogMessage, rbnDhcpCtxThresholdRisingThreshold, rbnDhcpCtxThresholdRisingSendTrap, rbnDhcpCtxThresholdRisingLogMessage } STATUS current DESCRIPTION "The collection of objects providing DHCP range information." ::= { rbnDhcpGroups 1 } rbnDhcpThresholdNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnDhcpIntfThresholdFallingThresholdMet, rbnDhcpIntfThresholdRisingThresholdMet, rbnDhcpCtxThresholdFallingThresholdMet, rbnDhcpCtxThresholdRisingThresholdMet } STATUS current DESCRIPTION "The collection of notifications related to a DHCP range." ::= { rbnDhcpGroups 2 } rbnDhcpIntfThresholdGroup OBJECT-GROUP OBJECTS { rbnDhcpIntfThresholdSize, rbnDhcpIntfThresholdInuse, rbnDhcpIntfThresholdAvailable, rbnDhcpIntfThresholdFallingThreshold, rbnDhcpIntfThresholdFallingSendTrap, rbnDhcpIntfThresholdFallingLogMessage, rbnDhcpIntfThresholdRisingThreshold, rbnDhcpIntfThresholdRisingSendTrap, rbnDhcpIntfThresholdRisingLogMessage } STATUS current DESCRIPTION "The collection of objects providing DHCP range information." ::= { rbnDhcpGroups 3 } rbnDhcpCtxThresholdGroup OBJECT-GROUP OBJECTS { rbnDhcpCtxThresholdName, rbnDhcpCtxThresholdSize, rbnDhcpCtxThresholdAvailable, rbnDhcpCtxThresholdInuse, rbnDhcpCtxThresholdFallingThreshold, rbnDhcpCtxThresholdFallingSendTrap, rbnDhcpCtxThresholdFallingLogMessage, rbnDhcpCtxThresholdRisingThreshold, rbnDhcpCtxThresholdRisingSendTrap, rbnDhcpCtxThresholdRisingLogMessage } STATUS current DESCRIPTION "The collection of objects providing DHCP range information." ::= { rbnDhcpGroups 4 } rbnDhcpRangeThresholdGroup OBJECT-GROUP OBJECTS { rbnDhcpRangeThresholdEndAddr, rbnDhcpRangeThresholdContextName, rbnDhcpRangeThresholdInterfaceName, rbnDhcpRangeThresholdSize, rbnDhcpRangeThresholdInuse, rbnDhcpRangeThresholdAvailable, rbnDhcpRangeThresholdFallingThreshold, rbnDhcpRangeThresholdFallingSendTrap, rbnDhcpRangeThresholdFallingLogMessage, rbnDhcpRangeThresholdRisingThreshold, rbnDhcpRangeThresholdRisingSendTrap, rbnDhcpRangeThresholdRisingLogMessage } STATUS current DESCRIPTION "The collection of objects providing DHCP range information." ::= { rbnDhcpGroups 5 } rbnDhcpIntfThresholdNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnDhcpIntfThresholdFallingThresholdMet, rbnDhcpIntfThresholdRisingThresholdMet } STATUS current DESCRIPTION "The collection of notifications related to a DHCP range." ::= { rbnDhcpGroups 6 } rbnDhcpCtxThresholdNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnDhcpCtxThresholdFallingThresholdMet, rbnDhcpCtxThresholdRisingThresholdMet } STATUS current DESCRIPTION "The collection of notifications related to a DHCP range." ::= { rbnDhcpGroups 7 } rbnDhcpRangeThresholdNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnDhcpRangeThresholdFallingThresholdMet, rbnDhcpRangeThresholdRisingThresholdMet } STATUS current DESCRIPTION "The collection of notifications related to a DHCP range." ::= { rbnDhcpGroups 8 } rbnDhcpLeaseFileFailureTrapGroup OBJECT-GROUP OBJECTS { rbnDhcpLeaseFileStorageSlot, rbnDhcpLeaseFileErrorType } STATUS current DESCRIPTION "The collection of objects related to DHCP lease file failures." ::= { rbnDhcpGroups 9 } rbnDhcpLeaseFileFailureNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnDhcpLeaseFileFailure } STATUS current DESCRIPTION "The collection of notifications related to DHCP lease file failures." ::= { rbnDhcpGroups 10 } rbnDhcpThresholdCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for threshold objects in the Redback DHCP MIB." MODULE -- this module MANDATORY-GROUPS { rbnDhcpThresholdGroup, rbnDhcpThresholdNotifyGroup } ::= { rbnDhcpCompliances 1 } rbnDhcpThresholdCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for threshold objects in the Redback DHCP MIB." MODULE -- this module MANDATORY-GROUPS { rbnDhcpIntfThresholdGroup, rbnDhcpCtxThresholdGroup, rbnDhcpRangeThresholdGroup, rbnDhcpIntfThresholdNotifyGroup, rbnDhcpCtxThresholdNotifyGroup, rbnDhcpRangeThresholdNotifyGroup } ::= { rbnDhcpCompliances 2 } rbnDhcpThresholdCompliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for threshold objects in the Redback DHCP MIB." MODULE -- this module MANDATORY-GROUPS { rbnDhcpIntfThresholdGroup, rbnDhcpCtxThresholdGroup, rbnDhcpRangeThresholdGroup, rbnDhcpIntfThresholdNotifyGroup, rbnDhcpCtxThresholdNotifyGroup, rbnDhcpRangeThresholdNotifyGroup, rbnDhcpLeaseFileFailureTrapGroup, rbnDhcpLeaseFileFailureNotifyGroup } ::= { rbnDhcpCompliances 3 } END