--***************************************************************************** -- -- Copyright 2010 Electroline Equipment Inc -- All Rights Reserved -- -- -- --***************************************************************************** -- Filename: ELECTROLINE-DVM-CONFIG.mib -- Author: Alain Leclerc -- Creation Date: 2010.05.18 --***************************************************************************** -- Description: -- -- This file contains the SNMPv2 MIB definition of the Configuration branch -- for the DVM products. -- --***************************************************************************** -- Revision History: -- 2010.05.18 Alain Leclerc First Draft -- 2011.02.09 Alain Leclerc Added mib to disable channel bonding -- 2011.04.27 Alain Leclerc Added mibs for the FPGA image Download -- 2011.05.19 Alain Leclerc Modify the EMS table to support IPv6 and HTTP Post --***************************************************************************** ELECTROLINE-DVM-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC dvmConfiguration FROM ELECTROLINE-DVM-ROOT-MIB DisplayString FROM RFC1213-MIB NetworkAddress FROM RFC1155-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 InetAddress, InetAddressType FROM INET-ADDRESS-MIB -- RFC 4001 TenthdB, TenthdBmV, FROM DOCS-IF-MIB; -- **************************************************************************** -- * Definition of Configuration Sub-groups -- **************************************************************************** dvmCfgGlobal OBJECT-IDENTITY STATUS current DESCRIPTION "Group of configuration objects related to all DVM models" ::= { dvmConfiguration 1 } -- **************************************************************************** -- * EMS CONFIGURATION DATA -- * -- * The following MIB objects control communication (Traps) with external Element -- * / Network Management Systems. It includes the EMS Address Table that is used to -- * indicate to the DVM the IP addresses of the EMS / NMS and related parameters. -- **************************************************************************** dvmCfgEms OBJECT-IDENTITY STATUS current DESCRIPTION "This sub-tree contains configuration information for trap management." ::= { dvmCfgGlobal 1 } cfgEmsAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF CfgEmsAddressEntry MAX-ACCESS read-write STATUS current DESCRIPTION "This is the list of ip addresses of the Element Management System(s) to which the DVM will send its AlarmEvent traps. The entries in this table are stored in non-volatile memory. A maximum of 10 entries is supported. " ::= { dvmCfgEms 1 } cfgEmsAddressEntry OBJECT-TYPE SYNTAX CfgEmsAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EMS entry definition" INDEX { cfgEmsAddressIndex } ::= { cfgEmsAddressTable 1 } CfgEmsAddressEntry ::= SEQUENCE { cfgEmsAddressIndex INTEGER, cfgEmsAddressIP IpAddress, cfgEmsAddressTrapPortNumber INTEGER, cfgEmsAddressType InetAddressType, cfgEmsAddress InetAddress, cfgEmsAddressProtocol INTEGER } cfgEmsAddressIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the EMS address table" ::= { cfgEmsAddressEntry 1 } cfgEmsAddressIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the EMS server that will receive traps. If the EMS server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is used only to have a more human readable ipv4 address. See also cfgEmsAddress. This object will have its value modified, given a valid SET to cfgEmsAddress." ::= { cfgEmsAddressEntry 2 } cfgEmsAddressTrapPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the Ems's port number to which the trap will be sent to. The default value is the common SNMP trap port (162)." ::= { cfgEmsAddressEntry 3 } cfgEmsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type of the EMS server. Values: unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)" ::= { cfgEmsAddressEntry 4 } cfgEmsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the destination EMS that will receive traps. If the message server is unknown, return the zero- length address string." ::= { cfgEmsAddressEntry 5} cfgEmsAddressProtocol OBJECT-TYPE SYNTAX INTEGER {snmp(1), http_post(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB can be used to remotely restore the factory default values, thus overwriting any other setup values that were stored in the DVM's non-volatile memory. The DVM must be reset following this command (commonReset or other reset function)." ::= { cfgEmsAddressEntry 6 } -- **************************************************************************** -- * GLOBAL CONFIGURATION DATA -- * -- * These MIB objects control some functions of the DVM that cannot be set -- * DOCSIS MIBs. -- **************************************************************************** dvmCfgResetToFactory OBJECT-TYPE SYNTAX INTEGER {reset(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB can be used to remotely restore the factory default values, thus overwriting any other setup values that were stored in the DVM's non-volatile memory. The DVM must be reset following this command (commonReset or other reset function)." ::= { dvmCfgGlobal 2 } dvmCfgUsbMode OBJECT-TYPE SYNTAX INTEGER {cpe(1), craft(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB controls the behavior of the USB port. In craft mode, the USB port has a default MAC address which enables a PC to be connected locally to any DVM with the same driver and network adapter settings. In craft mode, read access to the DOCSIS MIBS and read/write access to the HMS is allowed. In CPE mode, the USB port behaves like a normal cable modem USB port, allowing access to the network if this access has been provisioned by the CMTS. In CPE mode, access to the MIBs is as per DOCSIS specifications. As well, read-write access to the Electroline MIBs is permitted. The DVM must be reset following this command (commonReset or other reset function) in order for the change to take effect. The value of this MIB is stored in non-volatile memory." ::= { dvmCfgGlobal 3 } dvmChannelBondingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the support of channel bonding. The value of this MIB is stored in non-volatile memory." ::= { dvmCfgGlobal 4 } -- **************************************************************************** -- * FPGA Configuration -- * -- * The following MIB objects are dedicated to the FPGA chipset on the DVM -- **************************************************************************** dvmCfgFpga OBJECT-IDENTITY STATUS current DESCRIPTION "This sub-tree contains configuration information For the FPGA chipset." ::= { dvmCfgGlobal 5 } dvmCfgFpgaSoftware OBJECT-IDENTITY STATUS current DESCRIPTION "This sub-tree contains control to perform a software update on the FPGA chipset." ::= { dvmCfgFpga 1 } dvmCfgFpgaSwServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of address of the TFTP server used for software upgrades. Values: unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)" ::= { dvmCfgFpgaSoftware 1 } dvmCfgFpgaSwServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the TFTP server used for software upgrades. If the TFTP server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is used only to have a more human readable ipv4 address. See also dvmCfgFpgaSwServerAddress. This object will have its value modified, given a valid SET to dvmCfgFpgaSwServerAddress." ::= { dvmCfgFpgaSoftware 2 } dvmCfgFpgaSwServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the TFTP server used for software upgrades. If the TFTP server is unknown, return the zero- length address string." ::= { dvmCfgFpgaSoftware 3} dvmCfgFpgaSwFilename OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the software image to be downloaded via TFTP for the FPGA. If unknown, the value of this object is the zero-length string." ::= { dvmCfgFpgaSoftware 4 } dvmCfgFpgaSwDloadNow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, a TFTP download will begin which will load the FPGA image from the TFTP server specified in dvmCfgFpgaSwServerAddress using the file specified in dvmCfgFpgaSwFilename. When read, always returns false(2)." ::= { dvmCfgFpgaSoftware 5 } dvmCfgFpgaSwDloadStatus OBJECT-TYPE SYNTAX INTEGER { failure(0), success(1), inProgress(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the last (or current) FPGA firmware image download attempt." ::= { dvmCfgFpgaSoftware 6 } dvmCfgFpgaSwCurrentVers OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version currently operating in the FPGA device." ::= { dvmCfgFpgaSoftware 7 } dvmCfgSystemTrapEnginFilter OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "OID use for comparaison with each OID parameter filter from NMS address list - TLV38" ::={dvmCfgGlobal 6 } END