-- ***************************************************************** -- EKINOPS-pmoail.TXT: MIB -- --MIB Part Number:3MI00205AJAD --MIB Version:02 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-PmOail-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulepmoail MODULE-IDENTITY LAST-UPDATED "201605230000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net" DESCRIPTION "Creation" REVISION "200903230000Z" DESCRIPTION "Add ext Pumps features" REVISION "200904080000Z" DESCRIPTION "Cosmetic for mib compilers" REVISION "200909240000Z" DESCRIPTION "CondType parameters insertion" REVISION "200912140000Z" DESCRIPTION "Correction on traps" REVISION "201002240000Z" DESCRIPTION "Probcause,AlarmType - NMS" REVISION "201007150000Z" DESCRIPTION "Add inventory objects for the NMS" REVISION "201010290000Z" DESCRIPTION "Formula in comments, Objetcs removal" REVISION "201011030000Z" DESCRIPTION "Modify inventory objects for the NMS" REVISION "201207040000Z" DESCRIPTION "Minor cosmetic updates" REVISION "201210050000Z" DESCRIPTION "Minor labels changes" REVISION "201403260000Z" DESCRIPTION "Probcause,AlarmType - NMS completion" REVISION "201412100000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201605230000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" ::= { ekinops 36 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pmoailalarms OBJECT IDENTIFIER ::= { modulepmoail 2 } pmoailAlmOther OBJECT IDENTIFIER ::= { pmoailalarms 1 } pmoailAlmOtherNurg OBJECT IDENTIFIER ::= { pmoailAlmOther 1 } pmoailAlmOtherUrg OBJECT IDENTIFIER ::= { pmoailAlmOther 2 } pmoailAlmOtherCrit OBJECT IDENTIFIER ::= { pmoailAlmOther 3 } pmoailAlmClient OBJECT IDENTIFIER ::= { pmoailalarms 2 } pmoailAlmClientNurg OBJECT IDENTIFIER ::= { pmoailAlmClient 1 } pmoailAlmClientUrg OBJECT IDENTIFIER ::= { pmoailAlmClient 2 } pmoailAlmClientCrit OBJECT IDENTIFIER ::= { pmoailAlmClient 3 } pmoailAlmLine OBJECT IDENTIFIER ::= { pmoailalarms 3 } pmoailAlmLineNurg OBJECT IDENTIFIER ::= { pmoailAlmLine 1 } pmoailAlmLineUrg OBJECT IDENTIFIER ::= { pmoailAlmLine 2 } pmoailAlmLineCrit OBJECT IDENTIFIER ::= { pmoailAlmLine 3 } pmoailmeasures OBJECT IDENTIFIER ::= { modulepmoail 3 } pmoailMesrOther OBJECT IDENTIFIER ::= { pmoailmeasures 1 } pmoailMesrClient OBJECT IDENTIFIER ::= { pmoailmeasures 2 } pmoailMesrLine OBJECT IDENTIFIER ::= { pmoailmeasures 3 } pmoailcontrolsWrite OBJECT IDENTIFIER ::= { modulepmoail 6 } pmoailCtrlOther OBJECT IDENTIFIER ::= { pmoailcontrolsWrite 1 } pmoailCtrlClient OBJECT IDENTIFIER ::= { pmoailcontrolsWrite 2 } pmoailCtrlLine OBJECT IDENTIFIER ::= { pmoailcontrolsWrite 3 } pmoailri OBJECT IDENTIFIER ::= { modulepmoail 7 } pmoailConfig OBJECT IDENTIFIER ::= { modulepmoail 9 } pmoailtraps OBJECT IDENTIFIER ::= { modulepmoail 10 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** PmoailpreampMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OA preamp" SYNTAX INTEGER { oapreampdefaultmode(0), oapreampconstantcurrentmode(1), oapreampconstantpowermode(2) } PmoailboosterMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OA booster" SYNTAX INTEGER { oaboosterdefaultmode(0), oaboosterconstantcurrentmode(1), oaboosterconstantpowermode(2) } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pmoailRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pmoailri 2 } pmoailRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pmoailri 3 } pmoailRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pmoailri 4 } pmoailRinvSwFoa OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Optical device driver description: This OID contains the description of the driver of the optical devices (Booster and Pre-Amp)" ::= { pmoailri 5 } pmoailRinvInLine1Table OBJECT-TYPE SYNTAX SEQUENCE OF PmoailRinvInLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the InLine1s on the selected module" ::= { pmoailri 6 } pmoailRinvInLine1Entry OBJECT-TYPE SYNTAX PmoailRinvInLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the InLine1s table" INDEX { pmoailRinvInLine1Index } ::= { pmoailRinvInLine1Table 1 } PmoailRinvInLine1Entry::= SEQUENCE { pmoailRinvInLine1Index Integer32, pmoailRinvInLine1 DisplayString } pmoailRinvInLine1Index OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for InLine1 table" ::= { pmoailRinvInLine1Entry 1 } pmoailRinvInLine1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the InLine1: This OID contains the inventory for the InLine1" ::= { pmoailRinvInLine1Entry 2 } pmoailRinvInLine2Table OBJECT-TYPE SYNTAX SEQUENCE OF PmoailRinvInLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the InLine2s on the selected module" ::= { pmoailri 7 } pmoailRinvInLine2Entry OBJECT-TYPE SYNTAX PmoailRinvInLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the InLine2 table" INDEX { pmoailRinvInLine2Index } ::= { pmoailRinvInLine2Table 1 } PmoailRinvInLine2Entry::= SEQUENCE { pmoailRinvInLine2Index Integer32, pmoailRinvInLine2 DisplayString } pmoailRinvInLine2Index OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for InLine2 table" ::= { pmoailRinvInLine2Entry 1 } pmoailRinvInLine2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the InLine2: This OID contains the inventory for the InLine2" ::= { pmoailRinvInLine2Entry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pmoailAlmsynthAlm0 OBJECT IDENTIFIER ::= { pmoailAlmOtherCrit 0 } pmoailAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmsynthAlm0 16 } pmoailAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmsynthAlm0 15 } pmoailAlmExtPumpNotLocked OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " External Pump1 Not Detected :This OID indicates that the first external pump is not detected by the amplifier module This alarm indicates if the first external pump is detected by the amplifier module EXT_PUMP_NOT_LOCKED pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmsynthAlm0 12 } pmoailAlmDwEdfaInitNotCompl OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Not Initialized :This OID indicates that the initialisation of the IL2 is not completed This status indicates if the IL2 has been correctly initialized DW_EDFA_INIT_NOT_COMPL other (1) other (1) (2) " ::= { pmoailAlmsynthAlm0 11 } pmoailAlmUpEdfaInitNotCompl OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Not Initialized :This OID indicates that the initialisation of the IL1 is not completed This status indicates if the IL1 has been correctly initialized UP_EDFA_INIT_NOT_COMPL other (1) other (1) (2) " ::= { pmoailAlmsynthAlm0 10 } pmoailAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the PM MOD_GLOB_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm0 9 } pmoailAlmMaintenanceMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the PM is in maintenance mode This status indiates if the module is currently in maintenance mode MAINTENANCE_MODE other (1) other (1) (2) " ::= { pmoailAlmsynthAlm0 1 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pmoailAlmsynthAlm2 OBJECT IDENTIFIER ::= { pmoailAlmOtherNurg 2 } pmoailAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD other (1) other (1) (2) " ::= { pmoailAlmsynthAlm2 3 } pmoailAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD other (1) other (1) (2) " ::= { pmoailAlmsynthAlm2 2 } pmoailAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE other (1) other (1) (2) " ::= { pmoailAlmsynthAlm2 1 } --- ***************************************************** --- LEAF for the synthAlm7 article --- ***************************************************** pmoailAlmsynthAlm7 OBJECT IDENTIFIER ::= { pmoailAlmLineCrit 7 } pmoailAlmLineFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm7 12 } pmoailAlmLineDdmAlm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM LINE_DDM_ALM equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm7 10 } pmoailAlmLineDdmWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM LINE_DDM_WARNING equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm7 9 } pmoailAlmLineTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Optical Output Shutdown :This OID indicates the IL1 optical output power is on This status indicates if the IL1 laser pump is ON or OFF LINE_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pmoailAlmsynthAlm7 5 } pmoailAlmLineHwFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm7 4 } --- ***************************************************** --- LEAF for the synthAlm8 article --- ***************************************************** pmoailAlmsynthAlm8 OBJECT IDENTIFIER ::= { pmoailAlmClientCrit 8 } pmoailAlmClientFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Port Failure :This OID indicates a failure on the Client port CLIENT_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm8 12 } pmoailAlmClientDdmAlm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client Optical Module DDM :This OID indicates an alarm is present coming out of Client optical interface DDM CLIENT_DDM_ALM equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm8 10 } pmoailAlmClientDdmWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client Optical Module DDM :This OID indicates a warning is present coming out of Client optical interface DDM CLIENT_DDM_WARNING equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm8 9 } pmoailAlmClientTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Optical Output Shutdown :This OID indicates the IL2 optical output power is on This status indicates if the IL2 laser pump transceiver laser is ON or OFF CLIENT_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pmoailAlmsynthAlm8 5 } pmoailAlmClientHwFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Port HW Failure :This OID indicates a failure on Client port, most probably caused by a HW issue CLIENT_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoailAlmsynthAlm8 4 } --- ***************************************************** --- LEAF for the clientEdfaAlarms1 article --- ***************************************************** pmoailAlmclientEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoailAlmClientUrg 32 } pmoailAlmClientBiasHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Bias High Alarm :This OID indicates that the Bias is higher than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 bias is too high CLIENT_BIAS_HIGH_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 8 } pmoailAlmClientBiasLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Bias Low Alarm :This OID indicates that the Bias is lower than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 bias is too low CLIENT_BIAS_LOW_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 7 } pmoailAlmClientOutputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 tx power is too high CLIENT_OUTPUT_PWR_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 6 } pmoailAlmClientOutputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 tx power is too low CLIENT_OUTPUT_PWR_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 5 } pmoailAlmClientInputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 rx power is too high CLIENT_INPUT_PWR_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 4 } pmoailAlmClientInputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 rx power is too low CLIENT_INPUT_PWR_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 3 } pmoailAlmClientGainHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the IL2 Module This alarm indicates if the IL2 gain is too high CLIENT_GAIN_HIGH_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 2 } pmoailAlmClientGainLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Gain Low Alarm :This OID indicates that the Gain is lower than the alarm theshold of the IL2 Module This alarm indicates if the IL2 gain is too low CLIENT_GAIN_LOW_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms1 1 } --- ***************************************************** --- LEAF for the clientEdfaWarnings article --- ***************************************************** pmoailAlmclientEdfaWarnings OBJECT IDENTIFIER ::= { pmoailAlmClientNurg 33 } pmoailAlmClientBiasHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Bias High Warning :This OID indicates that the Bias is higher than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 bias is too high CLIENT_BIAS_HIGH_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 8 } pmoailAlmClientBiasLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Bias Low Warning :This OID indicates that the Bias is lower than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 bias is too low CLIENT_BIAS_LOW_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 7 } pmoailAlmClientOutputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 tx power is too high CLIENT_OUTPUT_PWR_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 6 } pmoailAlmClientOutputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 tx power is too low CLIENT_OUTPUT_PWR_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 5 } pmoailAlmClientInputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 rx power is too high CLIENT_INPUT_PWR_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 4 } pmoailAlmClientInputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 rx power is too low CLIENT_INPUT_PWR_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 3 } pmoailAlmClientGainHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the IL2 Module This alarm indicates if the IL2 gain is too high CLIENT_GAIN_HIGH_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 2 } pmoailAlmClientGainLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Gain Low Warning :This OID indicates that the Gain is lower than the Warning theshold of the IL2 Module This alarm indicates if the IL2 gain is too low CLIENT_GAIN_LOW_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaWarnings 1 } --- ***************************************************** --- LEAF for the clientEdfaAlarms2 article --- ***************************************************** pmoailAlmclientEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoailAlmClientCrit 35 } pmoailAlmClientExtPumpEdfaLowCurrent OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 External Pump1 Low Current :This OID indicates that the EDFA pump current of the first external pump linked to the IL2 is too low This alarm indicates that the EDFA pump current of the first external pump linked to the IL2 is too low CLIENT_EXT_PUMP_EDFA_LOW_CURRENT pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms2 5 } pmoailAlmClientEdfaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Loss Of Signal :This OID indicates a Loss of Signal on the IL1 Optical Module This alarm indicates if an optical signal is detected on the IL1 input CLIENT_EDFA_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pmoailAlmclientEdfaAlarms2 4 } pmoailAlmClientEdfaLaserFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Pump Laser Fail :This OID indicates a Transmit Laser Fail on the IL2 Optical Module This alarm indicates if the laser of the IL2 is in fail condition CLIENT_EDFA_LASER_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms2 3 } pmoailAlmClientEdfaTecFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 TEC Fail :This OID indicates that the TEC is in fail condition on the IL2 Optical Module This alarm indicates if the TEC of the IL2 is in fail condition CLIENT_EDFA_TEC_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms2 2 } pmoailAlmClientEdfaNr OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Optical Module Not Ready :This OID indicates that the IL2 Optical Module is not ready This status indicates if the IL2 has been correctly initialized CLIENT_EDFA_NR equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoailAlmclientEdfaAlarms2 1 } --- ***************************************************** --- LEAF for the lineEdfaAlarms1 article --- ***************************************************** pmoailAlmlineEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoailAlmLineUrg 40 } pmoailAlmLineBiasHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Bias High Alarm :This OID indicates that the Bias is higher than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 bias is too high LINE_BIAS_HIGH_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 8 } pmoailAlmLineBiasLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Bias Low Alarm :This OID indicates that the Bias is lower than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 bias is too low LINE_BIAS_LOW_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 7 } pmoailAlmLineOutputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 tx power is too high LINE_OUTPUT_PWR_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 6 } pmoailAlmLineOutputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm theshold of the IL1 Optical Module This alarm indicates if the IL1 tx power is too low LINE_OUTPUT_PWR_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 5 } pmoailAlmLineInputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 rx power is too high LINE_INPUT_PWR_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 4 } pmoailAlmLineInputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm theshold of the IL2 Optical Module This alarm indicates if the IL2 rx power is too low LINE_INPUT_PWR_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 3 } pmoailAlmLineGainHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the IL1 Module This alarm indicates if the IL1 gain is too high LINE_GAIN_HIGH_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 2 } pmoailAlmLineGainLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Gain Low Alarm :This OID indicates that the Gain is lower than the alarm theshold of the IL1 Module This alarm indicates if the IL1 gain is too low LINE_GAIN_LOW_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms1 1 } --- ***************************************************** --- LEAF for the lineEdfaWarnings article --- ***************************************************** pmoailAlmlineEdfaWarnings OBJECT IDENTIFIER ::= { pmoailAlmLineNurg 41 } pmoailAlmLineBiasHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Bias High Warning :This OID indicates that the Bias is higher than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 bias is too high LINE_BIAS_HIGH_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 8 } pmoailAlmLineBiasLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Bias Low Warning :This OID indicates that the Bias is lower than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 bias is too low LINE_BIAS_LOW_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 7 } pmoailAlmLineOutputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 tx power is too high LINE_OUTPUT_PWR_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 6 } pmoailAlmLineOutputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning theshold of the IL1 Optical Module This warning indicates if the IL1 tx power is too low LINE_OUTPUT_PWR_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 5 } pmoailAlmLineInputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 rx power is too high LINE_INPUT_PWR_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 4 } pmoailAlmLineInputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning theshold of the IL2 Optical Module This warning indicates if the IL2 rx power is too low LINE_INPUT_PWR_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 3 } pmoailAlmLineGainHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the IL1 Module This alarm indicates if the IL1 gain is too high LINE_GAIN_HIGH_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 2 } pmoailAlmLineGainLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Gain Low Warning :This OID indicates that the Gain is lower than the Warning theshold of the IL1 Module This alarm indicates if the IL1 gain is too low LINE_GAIN_LOW_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaWarnings 1 } --- ***************************************************** --- LEAF for the lineEdfaAlarms2 article --- ***************************************************** pmoailAlmlineEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoailAlmLineCrit 43 } pmoailAlmLineExtPumpEdfaLowCurrent OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 External Pump1 Low Current :This OID indicates that the EDFA pump current of the first external pump linked to the IL1 is too low This alarm indicates that the EDFA pump current of the first external pump linked to the IL1 is too low. LINE_EXT_PUMP_EDFA_LOW_CURRENT pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms2 5 } pmoailAlmLineEdfaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Loss Of Signal :This OID indicates a Loss of Signal on the IL2 Optical Module This alarm indicates if an optical signal is detected on the IL2 input LINE_EDFA_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pmoailAlmlineEdfaAlarms2 4 } pmoailAlmLineEdfaLaserFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Pump Laser Fail :This OID indicates a Transmit Laser Fail on the IL1 Optical Module This alarm indicates if the laser of the IL1 is in fail condition LINE_EDFA_LASER_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms2 3 } pmoailAlmLineEdfaTecFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 TEC Fail :This OID indicates that the TEC is in fail condition on the IL1 Optical Module This alarm indicates if the TEC of the IL1 is in fail condition LINE_EDFA_TEC_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms2 2 } pmoailAlmLineEdfaNr OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Optical Module Not Ready :This OID indicates that the IL1 Optical Module is not ready This status indicates if the IL1 has been correctly initialized LINE_EDFA_NR equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoailAlmlineEdfaAlarms2 1 } --- ***************************************************** --- LEAF for the foaAlarms article --- ***************************************************** pmoailAlmfoaAlarms OBJECT IDENTIFIER ::= { pmoailAlmOtherUrg 74 } pmoailAlmTempHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature High Alarm :This OID indicates that the PM temperature is higher than the alarm threshold TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaAlarms 8 } pmoailAlmTermpLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature Low Alarm :This OID indicates that the PM temperature if lower than the alarm threshold TERMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaAlarms 7 } pmoailAlm3v3HighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " 3V3 High Alarm :This OID indicates that the PM 3V3 voltage is higher than the alarm threshold 3V3_HIGH_ALARM powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaAlarms 6 } pmoailAlm3v3LowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " 3V3 Low Alarm :This OID indicates that the PM 3V3 voltage is lower than the alarm threshold 3V3_LOW_ALARM powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaAlarms 5 } --- ***************************************************** --- LEAF for the foaWarnings article --- ***************************************************** pmoailAlmfoaWarnings OBJECT IDENTIFIER ::= { pmoailAlmOtherNurg 75 } pmoailAlmTempHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature High Warning :This OID indicates that the PM temperature if higher than the Warning threshold TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaWarnings 8 } pmoailAlmTermpLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature Low Warning :This OID indicates that the PM temperature if lower than the Warning threshold TERMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaWarnings 7 } pmoailAlm3v3HighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " 3V3 High Warning :This OID indicates that the PM 3V3 voltage is higher than the Warning threshold 3V3_HIGH_WARNING powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaWarnings 6 } pmoailAlm3v3LowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " 3V3 Low Warning :This OID indicates that the PM 3V3 voltage is lower than the Warning threshold 3V3_LOW_WARNING powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoailAlmfoaWarnings 5 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synth0 article --- ***************************************************** pmoailCtrlsynth0 OBJECT IDENTIFIER ::= { pmoailCtrlOther 0 } pmoailCtrlConfClear OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. This control restores the default configuration of the module " ::= { pmoailCtrlsynth0 13 } pmoailCtrlConfFlash OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. This control saves the customer configuration on the module " ::= { pmoailCtrlsynth0 9 } pmoailCtrlConfLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables :When set this enables loading from flash configuration1 into the module. " ::= { pmoailCtrlsynth0 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pmoailCtrlswMgnt OBJECT IDENTIFIER ::= { pmoailCtrlOther 5 } pmoailCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unchanged. This control initiates a warm reset of the module. " ::= { pmoailCtrlswMgnt 3 } pmoailCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pmoailCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the clientEdfaLaserOff article --- ***************************************************** pmoailCtrlclientEdfaLaserOff OBJECT IDENTIFIER ::= { pmoailCtrlClient 32 } pmoailCtrlClientEdfaLaserOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Pump Laser Shutdown :This OID switches OFF the laser of the IL2 Optical Module This control defines the laser state of the IL2 " ::= { pmoailCtrlclientEdfaLaserOff 1 } --- ***************************************************** --- LEAF for the clientEdfaMode article --- ***************************************************** pmoailCtrlclientEdfaMode OBJECT-TYPE SYNTAX PmoailpreampMode MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Module Mode :This OID selects the mode of the IL2 Module This control defines the IL2 Mode (0: Default mode, 2:Constant output power) " ::= { pmoailCtrlClient 33 } --- ***************************************************** --- LEAF for the clientIlasSettingValue article --- ***************************************************** pmoailCtrlclientIlasSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Laser Current Value :This OID sets the value of the laser current of the IL2 Module (active only in constant current mode) (AV = Current *100) (Unit = mA) This control defines the IL2 Laser current in mA (valid only in constant current mode) " ::= { pmoailCtrlClient 34 } --- ***************************************************** --- LEAF for the clientPlasSettingValue article --- ***************************************************** pmoailCtrlclientPlasSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Pump Power Value :This OID sets the value of the laser power of the IL2 Optical Module (active only in constant power mode) (AV=(Power/0,005) + 32768) (Unit = dBm) This control defines the IL2 laser power in dBm (valid only in constant output power mode) " ::= { pmoailCtrlClient 35 } --- ***************************************************** --- LEAF for the clientGainSettingValue article --- ***************************************************** pmoailCtrlclientGainSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Gain Value :This OID sets the value of the gain of the IL2 Module (active only in constant gain mode) (AV=(Gain/0,005) + 32768) (Unit = dB) " ::= { pmoailCtrlClient 36 } --- ***************************************************** --- LEAF for the clientEffPwrOutSettingValue article --- ***************************************************** pmoailCtrlclientEffPwrOutSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL2 Effective Output Power :This OID sets the value of the effective output power (without noise power) of the IL2 Module (active only in input power function mode) (AV=(Power/0,005) + 32768) (Unit = dBm) This control defines the IL2 effective output power in dBm (valid only in Effective Ouput power mode). " ::= { pmoailCtrlClient 37 } --- ***************************************************** --- LEAF for the lineEdfaLaserOff article --- ***************************************************** pmoailCtrllineEdfaLaserOff OBJECT IDENTIFIER ::= { pmoailCtrlLine 40 } pmoailCtrlLineEdfaLaserOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Pump Laser Shutdown :This OID switches OFF the laser of the IL1 Optical Module This control defines the laser state of the IL1 " ::= { pmoailCtrllineEdfaLaserOff 1 } --- ***************************************************** --- LEAF for the lineEdfaMode article --- ***************************************************** pmoailCtrllineEdfaMode OBJECT-TYPE SYNTAX PmoailboosterMode MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Module Mode :This OID selects the mode of the IL1 Module This control defines the IL1 Mode (0: Default mode, 2:Constant output power) " ::= { pmoailCtrlLine 41 } --- ***************************************************** --- LEAF for the lineIlasSettingValue article --- ***************************************************** pmoailCtrllineIlasSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Laser Current Value :This OID sets the value of the laser current of the IL1 Module (active only in constant current mode) (AV = Current *100) (Unit = mA) This control defines the IL1 Laser current in mA (valid only in constant current mode) " ::= { pmoailCtrlLine 42 } --- ***************************************************** --- LEAF for the linePlasSettingValue article --- ***************************************************** pmoailCtrllinePlasSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Pump Power Value :This OID sets the value of the laser power of the IL1 Optical Module (active only in constant power mode) (AV=(Power/0,005) + 32768) (Unit = dBm) This control defines the IL1 laser power in dBm (valid only in constant output power mode) " ::= { pmoailCtrlLine 43 } --- ***************************************************** --- LEAF for the lineGainSettingValue article --- ***************************************************** pmoailCtrllineGainSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Gain Value :This OID sets the value of the gain of the IL1 Module (active only in constant gain mode) (AV=(Gain/0,005) + 32768) (Unit = dB) " ::= { pmoailCtrlLine 44 } --- ***************************************************** --- LEAF for the lineEffPwrOutSettingValue article --- ***************************************************** pmoailCtrllineEffPwrOutSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " IL1 Effective Output Power :This OID sets the value of the effective output power (without noise power) of the IL1 Module (active only in input power function mode) (AV=(Power/0,005) + 32768) (Unit = dBm) " ::= { pmoailCtrlLine 45 } --- ***************************************************** --- LEAF for the powerDown article --- ***************************************************** pmoailCtrlpowerDown OBJECT IDENTIFIER ::= { pmoailCtrlOther 72 } pmoailCtrlSoftPowerDown OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Software Shutdown :This OID shuts down the PM Software This control initiates a shut down of software. " ::= { pmoailCtrlpowerDown 1 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pmoailCtrlledTest OBJECT IDENTIFIER ::= { pmoailCtrlOther 73 } pmoailCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pmoailCtrlledTest 3 } pmoailCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pmoailCtrlledTest 2 } pmoailCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pmoailCtrlledTest 1 } --- ***************************************************** --- LEAF for the maintMode article --- ***************************************************** pmoailCtrlmaintMode OBJECT IDENTIFIER ::= { pmoailCtrlOther 75 } pmoailCtrlMaintenance OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Maintenance Mode :This OID sets the PM in maintenance mode This control enables the maintenance mode of the module " ::= { pmoailCtrlmaintMode 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the clientEdfaBiasMeas article --- ***************************************************** pmoailMesrclientEdfaBiasMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Pump Laser Current :This OID gives the pump laser current of the IL2 Optical Module (Current =AV/100) (Unit = mA) This measure gives the bias of the IL2 pump laser " ::= { pmoailMesrClient 32 } --- ***************************************************** --- LEAF for the clientEdfaTxpwrMeas article --- ***************************************************** pmoailMesrclientEdfaTxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Tx Power :This OID gives the transmit power value of the IL2 Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Tx optical power of the IL2 " ::= { pmoailMesrClient 33 } --- ***************************************************** --- LEAF for the clientEdfaRxpwrMeas article --- ***************************************************** pmoailMesrclientEdfaRxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Rx Power :This OID gives the receive power value of the IL1 Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Rx optical power of the IL1 " ::= { pmoailMesrClient 34 } --- ***************************************************** --- LEAF for the clientEdfaGainMeas article --- ***************************************************** pmoailMesrclientEdfaGainMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Gain :This OID gives the gain value of the IL2 Module (Gain =(AV-32768)*0,005) (Unit = dB) This measure gives the optical gain of the IL2 " ::= { pmoailMesrClient 35 } --- ***************************************************** --- LEAF for the lineEdfaBiasMeas article --- ***************************************************** pmoailMesrlineEdfaBiasMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Pump Laser Current :This OID gives the pump laser current of the IL1 Optical Module (Current =AV/100) (Unit = mA) This measure gives the bias of the IL1 pump laser " ::= { pmoailMesrLine 40 } --- ***************************************************** --- LEAF for the lineEdfaTxpwrMeas article --- ***************************************************** pmoailMesrlineEdfaTxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Tx Power :This OID gives the transmit power value of the IL1 Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Tx optical power of the IL1 " ::= { pmoailMesrLine 41 } --- ***************************************************** --- LEAF for the lineEdfaRxpwrMeas article --- ***************************************************** pmoailMesrlineEdfaRxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL2 Rx Power :This OID gives the receive power value of the IL2 Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Rx optical power of the IL2 " ::= { pmoailMesrLine 42 } --- ***************************************************** --- LEAF for the lineEdfaGainMeas article --- ***************************************************** pmoailMesrlineEdfaGainMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " IL1 Gain :This OID gives the gain value of the IL1 Module (Gain =(AV-32768)*0,005) (Unit = dB) This measure gives the optical gain of the IL1 " ::= { pmoailMesrLine 43 } --- ***************************************************** --- LEAF for the tempMeas article --- ***************************************************** pmoailMesrtempMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Module Temperature :This OID gives the temperature of the PM (Unit = C) This measure gives the temperature of the module " ::= { pmoailMesrOther 72 } --- ***************************************************** --- LEAF for the 3v3Meas article --- ***************************************************** pmoailMesr3v3Meas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Module 3.3 Voltage :This OID gives the 3V3 voltage of the PM (Unit = V) This measure gives the 3V3 voltage of the module " ::= { pmoailMesrOther 73 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group noValue --- ***************************************************** pmoailCfgNoValue OBJECT IDENTIFIER ::= { pmoailConfig 1 } --- ***************************************************** --- LEAF for the table 2111 --- ***************************************************** pmoailtableclientStartup OBJECT IDENTIFIER ::= { pmoailCfgNoValue 1 } pmoailCfgclientEdfaLaserCtrl OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Laser :This OID configures the default initialisation settings on the client laser. " ::= { pmoailtableclientStartup 2 } pmoailCfgclientEdfaLaserMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client mode :This OID configures the default mode on the client amplifier. " ::= { pmoailtableclientStartup 3 } --- ***************************************************** --- LEAF for the table Group lineStartUp --- ***************************************************** pmoailCfgLineStartUp OBJECT IDENTIFIER ::= { pmoailConfig 2 } --- ***************************************************** --- LEAF for the table 2191 --- ***************************************************** pmoailtablelineStartup OBJECT IDENTIFIER ::= { pmoailCfgLineStartUp 1 } pmoailCfglineEdfaLaserCtrl OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line Laser :This OID configures the default initialisation settings on the line laser. " ::= { pmoailtablelineStartup 2 } pmoailCfglineEdfaLaserMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line mode :This OID configures the default mode on the line amplifier. " ::= { pmoailtablelineStartup 3 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pmoailCfgLabels OBJECT IDENTIFIER ::= { pmoailConfig 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pmoailCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoailCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmoailCfgLabels 1 } pmoailCfgLabelclientEntry OBJECT-TYPE SYNTAX PmoailCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmoailCfgLabelclientIndex } ::= { pmoailCfgLabelclientTable 1 } PmoailCfgLabelclientEntry ::= SEQUENCE { pmoailCfgLabelclientIndex INTEGER, pmoailCfgLabelclientPortn DisplayString } pmoailCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pmoailCfgLabelclientEntry 1 } pmoailCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pmoailCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pmoailCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoailCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmoailCfgLabels 2 } pmoailCfgLabellineEntry OBJECT-TYPE SYNTAX PmoailCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmoailCfgLabellineIndex } ::= { pmoailCfgLabellineTable 1 } PmoailCfgLabellineEntry ::= SEQUENCE { pmoailCfgLabellineIndex INTEGER, pmoailCfgLabellinePortn DisplayString } pmoailCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pmoailCfgLabellineEntry 1 } pmoailCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pmoailCfgLabellineEntry 3 } pmoailCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pmoailConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pmoailtrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pmoailtraps 4 } --- ***************************************************** --- GLOBAL TRAPS --- ***************************************************** pmoailLineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmLineDdmWarning, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pmoailAlmLineDdmWarning "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Warning appears on IL2 input or IL1 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pmoailtraps 30 } pmoailLineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmLineDdmWarning, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Line Not Urgent ON"} --&MATCH { pmoailAlmLineDdmWarning "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Warning disappears on IL2 input or IL1 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pmoailtraps 31 } pmoailLineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmLineDdmAlm, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Urgent ON" --&ACTIONS { log, major } --&MATCH { pmoailAlmLineDdmAlm "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Alarm appears on IL2 input or IL1 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pmoailtraps 32 } pmoailLineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmLineDdmAlm, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Line Urgent ON"} --&MATCH { pmoailAlmLineDdmAlm "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Alarm disappears on IL2 input or IL1 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pmoailtraps 33 } pmoailLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmLineFail, pmoailAlmLineHwFail, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pmoailAlmLineFail "on", pmoailAlmLineHwFail "*", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm appears on IL2 input or IL1 Output of PMOAIL in slot $3 ($A)" --&FILTNAME "PMOAIL Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmoailAlmLineFail "*", pmoailAlmLineHwFail "on", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm appears on IL2 input or IL1 Output of PMOAIL in slot $3 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pmoailtraps 34 } pmoailLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmLineFail, pmoailAlmLineHwFail, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Line Fail ON"} --&MATCH { pmoailAlmLineFail "on", pmoailAlmLineHwFail "*", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on IL2 input or IL1 Output of PMOAIL in slot $3 ($A)" --&FILTNAME "PMOAIL Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmoailAlmLineFail "*", pmoailAlmLineHwFail "on", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on IL2 input or IL1 Output of PMOAIL in slot $3 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pmoailtraps 35 } --- ***************************************************** --- PORTS TRAPS --- ***************************************************** pmoailClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmClientDdmWarning, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pmoailAlmClientDdmWarning "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Warning appears on IL1 input or IL2 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pmoailtraps 40 } pmoailClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmClientDdmWarning, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Client Not Urgent ON"} --&MATCH { pmoailAlmClientDdmWarning "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Warning disappears on IL1 input or IL2 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pmoailtraps 41 } pmoailClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmClientDdmAlm, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Urgent ON" --&ACTIONS { log, major } --&MATCH { pmoailAlmClientDdmAlm "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Alarm appears on IL1 input or IL2 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pmoailtraps 42 } pmoailClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmClientDdmAlm, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Client Urgent ON"} --&MATCH { pmoailAlmClientDdmAlm "on", pmoailtrapBoardNumber "$2"} --&MESG "DDM Alarm disappears on IL1 input or IL2 Output of PMOAIL in slot $2 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pmoailtraps 43 } pmoailClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmClientFail, pmoailAlmClientHwFail, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pmoailAlmClientFail "on", pmoailAlmClientHwFail "*", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm appears on IL1 input or IL2 Output of PMOA-IL in slot $3 ($A)" --&FILTNAME "PMOAIL Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmoailAlmClientFail "*", pmoailAlmClientHwFail "on", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm appears on IL1 input or IL2 Output of PMOA-IL in slot $3 ($A)" DESCRIPTION "Critical client default is activated" ::= { pmoailtraps 44 } pmoailClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmClientFail, pmoailAlmClientHwFail, pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOAIL Client Fail ON"} --&MATCH { pmoailAlmClientFail "on", pmoailAlmClientHwFail "*", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on IL1 input or IL2 Output of PMOA-IL in slot $3 ($A)" --&FILTNAME "PMOAIL Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmoailAlmClientFail "*", pmoailAlmClientHwFail "on", pmoailtrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on IL1 input or IL2 Output of PMOA-IL in slot $3 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pmoailtraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pmoailPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoailAlmDefFuseB, pmoailAlmDefFuseA , pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pmoailAlmDefFuseB "*", pmoailAlmDefFuseA "on", pmoailtrapBoardNumber "$3"} --&MESG "Power Input A Fail on PMOA-IL in Slot $3 ($A)" --&FILTNAME "PMOAIL Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pmoailAlmDefFuseB "on", pmoailAlmDefFuseA "*", pmoailtrapBoardNumber "$3"} --&MESG "Power Input B Fail on PMOA-IL in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pmoailtraps 50 } pmoailPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoailAlmDefFuseB, pmoailAlmDefFuseA , pmoailtrapBoardNumber} STATUS current --&FILTNAME "PMOAIL Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PMOAIL Fuse A Fail ON", "PMOAIL Fuse B Fail ON" } --&MATCH { pmoailAlmDefFuseB "on", pmoailAlmDefFuseA "on", pmoailtrapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PMOA-IL in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pmoailtraps 51 } END