-- ***************************************************************** -- EKINOPS-Pm404.TXT: MIB -- --MIB Part Number:3MI00301AFAD --MIB Version:01 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pm404-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePm404 MODULE-IDENTITY LAST-UPDATED "201605230000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net" DESCRIPTION "MIB for the Ekinops Pm404 hardware." REVISION "200704040000Z" DESCRIPTION "Initial Version." REVISION "200709190000Z" DESCRIPTION "Add loopbacks on line1 and line2" REVISION "200711210000Z" DESCRIPTION "Update Ekinops address,Helps on objects, Ports Labels" REVISION "200904210000Z" DESCRIPTION "Update of Mib number" REVISION "200908170000Z" DESCRIPTION "CondType parameters insertion" REVISION "200912140000Z" DESCRIPTION "Correction on Traps on Line 2" REVISION "201002240000Z" DESCRIPTION "Probcause,AlarmType - NMS" REVISION "201011050000Z" DESCRIPTION "Formulas in comments" REVISION "201012170000Z" DESCRIPTION "Fix on Smpc trap" REVISION "201207040000Z" DESCRIPTION "Minor cosmetic updates" REVISION "201403250000Z" DESCRIPTION "Probcause,AlarmType - NMS completion" REVISION "201412150000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201605230000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" ::= { ekinops 25 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pm404alarms OBJECT IDENTIFIER ::= { modulePm404 2 } pm404AlmOther OBJECT IDENTIFIER ::= { pm404alarms 1 } pm404AlmOtherNurg OBJECT IDENTIFIER ::= { pm404AlmOther 1 } pm404AlmOtherUrg OBJECT IDENTIFIER ::= { pm404AlmOther 2 } pm404AlmOtherCrit OBJECT IDENTIFIER ::= { pm404AlmOther 3 } pm404AlmClient OBJECT IDENTIFIER ::= { pm404alarms 2 } pm404AlmClientNurg OBJECT IDENTIFIER ::= { pm404AlmClient 1 } pm404AlmClientUrg OBJECT IDENTIFIER ::= { pm404AlmClient 2 } pm404AlmClientCrit OBJECT IDENTIFIER ::= { pm404AlmClient 3 } pm404AlmLine OBJECT IDENTIFIER ::= { pm404alarms 3 } pm404AlmLineNurg OBJECT IDENTIFIER ::= { pm404AlmLine 1 } pm404AlmLineUrg OBJECT IDENTIFIER ::= { pm404AlmLine 2 } pm404AlmLineCrit OBJECT IDENTIFIER ::= { pm404AlmLine 3 } pm404measures OBJECT IDENTIFIER ::= { modulePm404 3 } pm404MesrOther OBJECT IDENTIFIER ::= { pm404measures 1 } pm404MesrClient OBJECT IDENTIFIER ::= { pm404measures 2 } pm404MesrLine OBJECT IDENTIFIER ::= { pm404measures 3 } pm404counters OBJECT IDENTIFIER ::= { modulePm404 4 } pm404CntOther OBJECT IDENTIFIER ::= { pm404counters 1 } pm404CntClient OBJECT IDENTIFIER ::= { pm404counters 2 } pm404CntLine OBJECT IDENTIFIER ::= { pm404counters 3 } pm404controlsWrite OBJECT IDENTIFIER ::= { modulePm404 6 } pm404CtrlOther OBJECT IDENTIFIER ::= { pm404controlsWrite 1 } pm404CtrlClient OBJECT IDENTIFIER ::= { pm404controlsWrite 2 } pm404CtrlLine OBJECT IDENTIFIER ::= { pm404controlsWrite 3 } pm404ri OBJECT IDENTIFIER ::= { modulePm404 7 } pm404riTable OBJECT IDENTIFIER ::= { pm404ri 1 } pm404Config OBJECT IDENTIFIER ::= { modulePm404 9 } pm404traps OBJECT IDENTIFIER ::= { modulePm404 10 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm404RinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pm404ri 2 } pm404RinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pm404ri 3 } pm404RinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pm404ri 4 } pm404RinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pm404ri 5 } pm404RinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform desciption: This OID contains the description of the Gateware platform." ::= { pm404ri 6 } pm404RinvLine1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm404RinvLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm404riTable 1 } pm404RinvLine1Entry OBJECT-TYPE SYNTAX Pm404RinvLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the Line1 SFP table" INDEX { pm404RinvLine1Index } ::= { pm404RinvLine1Table 1 } Pm404RinvLine1Entry::= SEQUENCE { pm404RinvLine1Index Integer32, pm404RinvSfpLine1 DisplayString } pm404RinvLine1Index OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for Line1 SFP table" ::= { pm404RinvLine1Entry 1 } pm404RinvSfpLine1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the Line1 SFP" ::= { pm404RinvLine1Entry 2 } pm404RinvLine2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm404RinvLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm404riTable 2 } pm404RinvLine2Entry OBJECT-TYPE SYNTAX Pm404RinvLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the Line SFP table" INDEX { pm404RinvLine2Index } ::= { pm404RinvLine2Table 1 } Pm404RinvLine2Entry::= SEQUENCE { pm404RinvLine2Index Integer32, pm404RinvsfpLine2 DisplayString } pm404RinvLine2Index OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pm404RinvLine2Entry 1 } pm404RinvsfpLine2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the Line2 SFP" ::= { pm404RinvLine2Entry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pm404AlmsynthAlm0 OBJECT IDENTIFIER ::= { pm404AlmOtherCrit 0 } pm404AlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404AlmsynthAlm0 16 } pm404AlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404AlmsynthAlm0 15 } pm404AlmModuleGlobFailure OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the PM MODULE_GLOB_FAILURE equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlm0 9 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pm404AlmsynthAlm2 OBJECT IDENTIFIER ::= { pm404AlmOtherNurg 2 } pm404AlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF other (1) other (1) (2) " ::= { pm404AlmsynthAlm2 4 } pm404AlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD other (1) other (1) (2) " ::= { pm404AlmsynthAlm2 3 } pm404AlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD other (1) other (1) (2) " ::= { pm404AlmsynthAlm2 2 } pm404AlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE other (1) other (1) (2) " ::= { pm404AlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pm404AlmsynthAlmLine1 articles --- ********************************************************* pm404AlmsynthAlmLine1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm404AlmsynthAlmLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404AlmsynthAlmLine1 Article " ::= { pm404AlmClientCrit 8 } pm404AlmsynthAlmLine1Entry OBJECT-TYPE SYNTAX Pm404AlmsynthAlmLine1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404AlmsynthAlmLine1 table " INDEX { pm404AlmsynthAlmLine1Index } ::= { pm404AlmsynthAlmLine1Table 1 } Pm404AlmsynthAlmLine1Entry ::= SEQUENCE { pm404AlmsynthAlmLine1Index INTEGER, pm404AlmLine1FailAccPortn EkiOnOff, pm404AlmLine1SfpDdmAlmPortn EkiOnOff, pm404AlmLine1SfpDdmWarningPortn EkiOnOff, pm404AlmLine1DwCaisPortn EkiOnOff, pm404AlmLine1LocalOosPortn EkiOnOff, pm404AlmLine1LsdPortn EkiOnOff, pm404AlmLine1HwFailAccPortn EkiOnOff, pm404AlmLine1DdmAbsentPortn EkiOnOff, pm404AlmLine1SfpAbsentPortn EkiOnOff } pm404AlmsynthAlmLine1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404AlmsynthAlmLine1 table " ::= { pm404AlmsynthAlmLine1Entry 1 } pm404AlmLine1FailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 Access Fail :This OID indicates a failure on the Line 1 port LINE1_FAIL_ACC_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine1Entry 13 } pm404AlmLine1SfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line 1 SFP DDM :This OID indicates an alarm is being received from the Line 1 SFP DDM This alarm indicates if a DDM Alarm has been detected on the line 1 transceiver LINE1_SFP_DDM_ALM_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine1Entry 11 } pm404AlmLine1SfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line 1 SFP DDM :This OID indicates a warning is being received from the Line 1 SFP DDM This alarm indicates if a DDM Warning has been detected on the line 1 transceiver LINE1_SFP_DDM_WARNING_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine1Entry 10 } pm404AlmLine1DwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 AIS Inserted :This OID indicates a CAIS has been inserted on the output Line 1 port. This status indicates if a Line Alarm Indication Signal is currently inserted on the line 1 interface LINE1_DW_CAIS_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine1Entry 9 } pm404AlmLine1LocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 Port In Service :This OID indicates that the local Line 1 port is In Service (1) or Out of Service (2) This status indicates if the line port 1 is in service LINE1_LOCAL_OOS_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine1Entry 7 } pm404AlmLine1LsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Laser Shutdown :This OID indicates the Line 1 SFP transmitter output has shut down. This status indicates if the line 1 transceiver laser is ON or OFF LINE1_LSD_A other (1) equipmentAlarm (5) (2) " ::= { pm404AlmsynthAlmLine1Entry 6 } pm404AlmLine1HwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 HW Fail :This OID indicates a failure on Line 1 port, most probably caused by a HW issue. LINE1_HW_FAIL_ACC_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine1Entry 5 } pm404AlmLine1DdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Line 1 SFP :This OID indicates that the Line 1 SFP module does not support the Digital Diagnostic Monitoring function This status indicates if the line transceiver includes the DDM feature LINE1_DDM_ABSENT_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine1Entry 3 } pm404AlmLine1SfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Absent :This OID indicates that the SFP module is not present in the Line 1 port. This alarm indicates if the line 1 transceiver is present. LINE1_SFP_ABSENT_A inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm404AlmsynthAlmLine1Entry 2 } --- ********************************************************* --- TABLE for the pm404AlmsynthAlmLine2 articles --- ********************************************************* pm404AlmsynthAlmLine2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm404AlmsynthAlmLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404AlmsynthAlmLine2 Article " ::= { pm404AlmLineCrit 12 } pm404AlmsynthAlmLine2Entry OBJECT-TYPE SYNTAX Pm404AlmsynthAlmLine2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404AlmsynthAlmLine2 table " INDEX { pm404AlmsynthAlmLine2Index } ::= { pm404AlmsynthAlmLine2Table 1 } Pm404AlmsynthAlmLine2Entry ::= SEQUENCE { pm404AlmsynthAlmLine2Index INTEGER, pm404AlmLine2FailPortn EkiOnOff, pm404AlmLine2DdmAlmPortn EkiOnOff, pm404AlmLine2DdmWarningPortn EkiOnOff, pm404AlmLine2DwCaisPortn EkiOnOff, pm404AlmLine2LocalOosPortn EkiOnOff, pm404AlmLine2LsdPortn EkiOnOff, pm404AlmLine2HwFailPortn EkiOnOff, pm404AlmLine2DdmAbsentPortn EkiOnOff, pm404AlmLine2SfpAbsentPortn EkiOnOff } pm404AlmsynthAlmLine2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404AlmsynthAlmLine2 table " ::= { pm404AlmsynthAlmLine2Entry 1 } pm404AlmLine2FailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 Access Fail :This OID indicates a failure on the Line 2 port LINE2_FAIL_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine2Entry 13 } pm404AlmLine2DdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line 2 SFP DDM :This OID indicates an alarm is being received from the Line 2 SFP DDM This alarm indicates if a DDM Alarm has been detected on the line 2 transceiver LINE2_DDM_ALM_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine2Entry 11 } pm404AlmLine2DdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line 2 SFP DDM :This OID indicates a warning is being received from the Line 2 SFP DDM This alarm indicates if a DDM Warning has been detected on the line 2 transceiver LINE2_DDM_WARNING_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine2Entry 10 } pm404AlmLine2DwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 AIS Inserted :This OID indicates a CAIS has been inserted on the output Line 2 port. This status indicates if a Line Alarm Indication Signal is currently inserted on the line 2 interface LINE2_DW_CAIS_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine2Entry 9 } pm404AlmLine2LocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 Port In Servicee :This OID indicates that the local Line 2 port is In Service (1) or Out of Service (2) This status indicates if the line port 2 is in service LINE2_LOCAL_OOS_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine2Entry 7 } pm404AlmLine2LsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Laser Shutdown :This OID indicates the Line 2 SFP transmitter output has shut down. This status indicates if the line 2 transceiver laser is ON or OFF LINE2_LSD_A other (1) equipmentAlarm (5) (2) " ::= { pm404AlmsynthAlmLine2Entry 6 } pm404AlmLine2HwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 HW Fail :This OID indicates a failure on Line 2 port, most probably caused by a HW issue. LINE2_HW_FAIL_A equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm404AlmsynthAlmLine2Entry 5 } pm404AlmLine2DdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Line 2 SFP :This OID indicates that the Line 2 SFP module does not support the Digital Diagnostic Monitoring function This status indicates if the line transceiver includes the DDM feature LINE2_DDM_ABSENT_A informationalStatus(1000) other (1) (2) " ::= { pm404AlmsynthAlmLine2Entry 3 } pm404AlmLine2SfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Absent :This OID indicates that the SFP module is not present in the Line 2 port. This alarm indicates if the line 2 transceiver is present. LINE2_SFP_ABSENT_A inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm404AlmsynthAlmLine2Entry 2 } --- ********************************************************* --- TABLE for the pm404Almline1AccessioAlm articles --- ********************************************************* pm404Almline1AccessioAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline1AccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline1AccessioAlm Article " ::= { pm404AlmClientCrit 16 } pm404Almline1AccessioAlmEntry OBJECT-TYPE SYNTAX Pm404Almline1AccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline1AccessioAlm table " INDEX { pm404Almline1AccessioAlmIndex } ::= { pm404Almline1AccessioAlmTable 1 } Pm404Almline1AccessioAlmEntry ::= SEQUENCE { pm404Almline1AccessioAlmIndex INTEGER, pm404AlmLine1ErrSigCdrPortn EkiOnOff, pm404AlmLine1LosCdrPortn EkiOnOff, pm404AlmLine1LosPortn EkiOnOff, pm404AlmLine1LasFailPortn EkiOnOff } pm404Almline1AccessioAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline1AccessioAlm table " ::= { pm404Almline1AccessioAlmEntry 1 } pm404AlmLine1ErrSigCdrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Error Signal On CDR On Line 1 : LINE1__ERR_SIG_CDR_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1AccessioAlmEntry 8 } pm404AlmLine1LosCdrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Signal On CDR On Line 1 : LINE1_LOS_CDR_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1AccessioAlmEntry 7 } pm404AlmLine1LosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Optical Signal On Line 1 :This OID indicates that no signal is present on the SFP of the Line 1 port This alarm indicates if an optical signal is detected on the line 1 transceiver input LINE1_LOS_A receiveFailure (41) physicalViolation (9) (2) " ::= { pm404Almline1AccessioAlmEntry 5 } pm404AlmLine1LasFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the Line 1 port (this alarm reports the transmitter failure alarm generated by the SFPs) This alarm indicates if the laser of the line 1 transceiver is in fail condition LINE1_LAS_FAIL_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1AccessioAlmEntry 2 } --- ********************************************************* --- TABLE for the pm404Almline2AccessioAlm articles --- ********************************************************* pm404Almline2AccessioAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline2AccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline2AccessioAlm Article " ::= { pm404AlmLineCrit 20 } pm404Almline2AccessioAlmEntry OBJECT-TYPE SYNTAX Pm404Almline2AccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline2AccessioAlm table " INDEX { pm404Almline2AccessioAlmIndex } ::= { pm404Almline2AccessioAlmTable 1 } Pm404Almline2AccessioAlmEntry ::= SEQUENCE { pm404Almline2AccessioAlmIndex INTEGER, pm404AlmLine2ErrSigCdrPortn EkiOnOff, pm404AlmLine2LosCdrPortn EkiOnOff, pm404AlmLine2LosPortn EkiOnOff, pm404AlmLine2LasFailPortn EkiOnOff } pm404Almline2AccessioAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline2AccessioAlm table " ::= { pm404Almline2AccessioAlmEntry 1 } pm404AlmLine2ErrSigCdrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Error Signal On CDR On Line 2 : LINE2__ERR_SIG_CDR_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2AccessioAlmEntry 8 } pm404AlmLine2LosCdrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Signal On CDR On Line 2 : LINE2_LOS_CDR_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2AccessioAlmEntry 7 } pm404AlmLine2LosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Optical Signal On Line 2 :This OID indicates that no signal is present on the SFP of the Line 2 port This alarm indicates if an optical signal is detected on the line 2 transceiver input LINE2_LOS_A receiveFailure (41) physicalViolation (9) (2) " ::= { pm404Almline2AccessioAlmEntry 5 } pm404AlmLine2LasFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the Line 2 port (this alarm reports the transmitter failure alarm generated by the SFPs) This alarm indicates if the laser of the line 2 transceiver is in fail condition LINE2_LAS_FAIL_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2AccessioAlmEntry 2 } --- ********************************************************* --- TABLE for the pm404Almline1SfpAlmDdm articles --- ********************************************************* pm404Almline1SfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline1SfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline1SfpAlmDdm Article " ::= { pm404AlmClientUrg 24 } pm404Almline1SfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm404Almline1SfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline1SfpAlmDdm table " INDEX { pm404Almline1SfpAlmDdmIndex } ::= { pm404Almline1SfpAlmDdmTable 1 } Pm404Almline1SfpAlmDdmEntry ::= SEQUENCE { pm404Almline1SfpAlmDdmIndex INTEGER, pm404AlmLine1RxPwrHighAlaPortn EkiOnOff, pm404AlmLine1RxPwrLowAlaPortn EkiOnOff, pm404AlmLine1TempHighAlaPortn EkiOnOff, pm404AlmLine1TempLowAlaPortn EkiOnOff, pm404AlmLine1VccHighAlaPortn EkiOnOff, pm404AlmLine1VccLowAlaPortn EkiOnOff, pm404AlmLine1TxBiasHighAlaPortn EkiOnOff, pm404AlmLine1TxBiasLowAlaPortn EkiOnOff, pm404AlmLine1Line1TxPwrHighAlaPortn EkiOnOff, pm404AlmLine1TxPwrLowAlaPortn EkiOnOff } pm404Almline1SfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline1SfpAlmDdm table " ::= { pm404Almline1SfpAlmDdmEntry 1 } pm404AlmLine1RxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM LINE1_RX_PWR_HIGH_ALA_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 17 } pm404AlmLine1RxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM LINE1_RX_PWR_LOW_ALA_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 16 } pm404AlmLine1TempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM LINE1_TEMP_HIGH_ALA_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 9 } pm404AlmLine1TempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM LINE1_TEMP_LOW_ALA_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 8 } pm404AlmLine1VccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM LINE1_VCC_HIGH_ALA_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 7 } pm404AlmLine1VccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM LINE1_VCC_LOW_ALA_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 6 } pm404AlmLine1TxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM LINE1_TX_BIAS_HIGH_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 5 } pm404AlmLine1TxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM LINE1_TX_BIAS_LOW_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 4 } pm404AlmLine1Line1TxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM LINE1_LINE1_TX_PWR_HIGH_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 3 } pm404AlmLine1TxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM LINE1_TX_PWR_LOW_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm404Almline2SfpAlmDdm articles --- ********************************************************* pm404Almline2SfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline2SfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline2SfpAlmDdm Article " ::= { pm404AlmLineUrg 28 } pm404Almline2SfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm404Almline2SfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline2SfpAlmDdm table " INDEX { pm404Almline2SfpAlmDdmIndex } ::= { pm404Almline2SfpAlmDdmTable 1 } Pm404Almline2SfpAlmDdmEntry ::= SEQUENCE { pm404Almline2SfpAlmDdmIndex INTEGER, pm404AlmLine2RxPwrHighAlaPortn EkiOnOff, pm404AlmLine2RxPwrLowAlaPortn EkiOnOff, pm404AlmLine2TempHighAlaPortn EkiOnOff, pm404AlmLine2TempLowAlaPortn EkiOnOff, pm404AlmLine2VccHighAlaPortn EkiOnOff, pm404AlmLine2VccLowAlaPortn EkiOnOff, pm404AlmLine2TxBiasHighAlaPortn EkiOnOff, pm404AlmLine2TxBiasLowAlaPortn EkiOnOff, pm404AlmLine2Line2TxPwrHighAlaPortn EkiOnOff, pm404AlmLine2TxPwrLowAlaPortn EkiOnOff } pm404Almline2SfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline2SfpAlmDdm table " ::= { pm404Almline2SfpAlmDdmEntry 1 } pm404AlmLine2RxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM LINE2_RX_PWR_HIGH_ALA_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 17 } pm404AlmLine2RxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM LINE2_RX_PWR_LOW_ALA_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 16 } pm404AlmLine2TempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM LINE2_TEMP_HIGH_ALA_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 9 } pm404AlmLine2TempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM LINE2_TEMP_LOW_ALA_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 8 } pm404AlmLine2VccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM LINE2_VCC_HIGH_ALA_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 7 } pm404AlmLine2VccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM LINE2_VCC_LOW_ALA_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 6 } pm404AlmLine2TxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM LINE2_TX_BIAS_HIGH_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 5 } pm404AlmLine2TxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM LINE2_TX_BIAS_LOW_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 4 } pm404AlmLine2Line2TxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM LINE2_LINE2_TX_PWR_HIGH_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 3 } pm404AlmLine2TxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM LINE2_TX_PWR_LOW_ALA_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm404Almline1SfpWarnDdm articles --- ********************************************************* pm404Almline1SfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline1SfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline1SfpWarnDdm Article " ::= { pm404AlmClientNurg 32 } pm404Almline1SfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm404Almline1SfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline1SfpWarnDdm table " INDEX { pm404Almline1SfpWarnDdmIndex } ::= { pm404Almline1SfpWarnDdmTable 1 } Pm404Almline1SfpWarnDdmEntry ::= SEQUENCE { pm404Almline1SfpWarnDdmIndex INTEGER, pm404AlmLine1RxPwrHighWngPortn EkiOnOff, pm404AlmLine1RxPwrLowWngPortn EkiOnOff, pm404AlmLine1TempHighWngPortn EkiOnOff, pm404AlmLine1TempLowWngPortn EkiOnOff, pm404AlmLine1VccHighWngPortn EkiOnOff, pm404AlmLine1VccLowWngPortn EkiOnOff, pm404AlmLine1TxBiasHighWngPortn EkiOnOff, pm404AlmLine1TxBiasLowWngPortn EkiOnOff, pm404AlmLine1TxPwrHighWngPortn EkiOnOff, pm404AlmLine1TxPwLowWngPortn EkiOnOff } pm404Almline1SfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline1SfpWarnDdm table " ::= { pm404Almline1SfpWarnDdmEntry 1 } pm404AlmLine1RxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM LINE1_RX_PWR_HIGH_WNG_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 17 } pm404AlmLine1RxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM LINE1_RX_PWR_LOW_WNG_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 16 } pm404AlmLine1TempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM LINE1_TEMP_HIGH_WNG_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 9 } pm404AlmLine1TempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM LINE1_TEMP_LOW_WNG_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 8 } pm404AlmLine1VccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM LINE1_VCC_HIGH_WNG_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 7 } pm404AlmLine1VccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM LINE1_VCC_LOW_WNG_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 6 } pm404AlmLine1TxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM LINE1_TX_BIAS_HIGH_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 5 } pm404AlmLine1TxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM LINE1_TX_BIAS_LOW_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 4 } pm404AlmLine1TxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM LINE1_TX_PWR_HIGH_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 3 } pm404AlmLine1TxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM LINE1_TX_PW_LOW_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline1SfpWarnDdmEntry 2 } --- ********************************************************* --- TABLE for the pm404Almline2SfpWarnDdm articles --- ********************************************************* pm404Almline2SfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Almline2SfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Almline2SfpWarnDdm Article " ::= { pm404AlmLineNurg 36 } pm404Almline2SfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm404Almline2SfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Almline2SfpWarnDdm table " INDEX { pm404Almline2SfpWarnDdmIndex } ::= { pm404Almline2SfpWarnDdmTable 1 } Pm404Almline2SfpWarnDdmEntry ::= SEQUENCE { pm404Almline2SfpWarnDdmIndex INTEGER, pm404AlmLine2RxPwrHighWngPortn EkiOnOff, pm404AlmLine2RxPwrLowWngPortn EkiOnOff, pm404AlmLine2TempHighWngPortn EkiOnOff, pm404AlmLine2TempLowWngPortn EkiOnOff, pm404AlmLine2VccHighWngPortn EkiOnOff, pm404AlmLine2VccLowWngPortn EkiOnOff, pm404AlmLine2TxBiasHighWngPortn EkiOnOff, pm404AlmLine2TxBiasLowWngPortn EkiOnOff, pm404AlmLine2TxPwrHighWngPortn EkiOnOff, pm404AlmLine2TxPwLowWngPortn EkiOnOff } pm404Almline2SfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Almline2SfpWarnDdm table " ::= { pm404Almline2SfpWarnDdmEntry 1 } pm404AlmLine2RxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM LINE2_RX_PWR_HIGH_WNG_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 17 } pm404AlmLine2RxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM LINE2_RX_PWR_LOW_WNG_A receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 16 } pm404AlmLine2TempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM LINE2_TEMP_HIGH_WNG_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 9 } pm404AlmLine2TempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM LINE2_TEMP_LOW_WNG_A temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 8 } pm404AlmLine2VccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM LINE2_VCC_HIGH_WNG_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 7 } pm404AlmLine2VccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM LINE2_VCC_LOW_WNG_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 6 } pm404AlmLine2TxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM LINE2_TX_BIAS_HIGH_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 5 } pm404AlmLine2TxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM LINE2_TX_BIAS_LOW_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 4 } pm404AlmLine2TxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM LINE2_TX_PWR_HIGH_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 3 } pm404AlmLine2TxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM LINE2_TX_PW_LOW_WNG_A transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm404Almline2SfpWarnDdmEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synth0 article --- ***************************************************** pm404Ctrlsynth0 OBJECT IDENTIFIER ::= { pm404CtrlOther 0 } pm404CtrlConfClear OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. This control restores the default configuration of the module " ::= { pm404Ctrlsynth0 13 } pm404CtrlConfFlash OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. This control saves the customer configuration on the module " ::= { pm404Ctrlsynth0 9 } pm404CtrlConfLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables :When set this enables loading from flash configuration1 into the module. " ::= { pm404Ctrlsynth0 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pm404Ctrlsynth4 OBJECT IDENTIFIER ::= { pm404CtrlOther 4 } pm404CtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pm404Ctrlsynth4 2 } pm404CtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pm404Ctrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pm404CtrlswMgnt OBJECT IDENTIFIER ::= { pm404CtrlOther 5 } pm404CtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unchanged. This control initiates a warm reset of the module. " ::= { pm404CtrlswMgnt 3 } pm404CtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pm404CtrlswMgnt 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline1SfpOnoff articles --- ********************************************************* pm404Ctrlline1SfpOnoffTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline1SfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline1SfpOnoff Article " ::= { pm404CtrlClient 16 } pm404Ctrlline1SfpOnoffEntry OBJECT-TYPE SYNTAX Pm404Ctrlline1SfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline1SfpOnoff table " INDEX { pm404Ctrlline1SfpOnoffIndex } ::= { pm404Ctrlline1SfpOnoffTable 1 } Pm404Ctrlline1SfpOnoffEntry ::= SEQUENCE { pm404Ctrlline1SfpOnoffIndex INTEGER, pm404Ctrlline1SfpOnoffPortn EkiState } pm404Ctrlline1SfpOnoffIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline1SfpOnoff table " ::= { pm404Ctrlline1SfpOnoffEntry 1 } pm404Ctrlline1SfpOnoffPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 1 SFP Laser Shutdown :This OID switches off the SFP This control defines the laser state of the line 1 transceiver " ::= { pm404Ctrlline1SfpOnoffEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline1Loopback articles --- ********************************************************* pm404Ctrlline1LoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline1LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline1Loopback Article " ::= { pm404CtrlClient 17 } pm404Ctrlline1LoopbackEntry OBJECT-TYPE SYNTAX Pm404Ctrlline1LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline1Loopback table " INDEX { pm404Ctrlline1LoopbackIndex } ::= { pm404Ctrlline1LoopbackTable 1 } Pm404Ctrlline1LoopbackEntry ::= SEQUENCE { pm404Ctrlline1LoopbackIndex INTEGER, pm404Ctrlline1LoopbackPortn EkiState } pm404Ctrlline1LoopbackIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline1Loopback table " ::= { pm404Ctrlline1LoopbackEntry 1 } pm404Ctrlline1LoopbackPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 1 Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver This maintenance parameter operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver " ::= { pm404Ctrlline1LoopbackEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline1LoopbackTerm articles --- ********************************************************* pm404Ctrlline1LoopbackTermTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline1LoopbackTermEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline1LoopbackTerm Article " ::= { pm404CtrlClient 18 } pm404Ctrlline1LoopbackTermEntry OBJECT-TYPE SYNTAX Pm404Ctrlline1LoopbackTermEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline1LoopbackTerm table " INDEX { pm404Ctrlline1LoopbackTermIndex } ::= { pm404Ctrlline1LoopbackTermTable 1 } Pm404Ctrlline1LoopbackTermEntry ::= SEQUENCE { pm404Ctrlline1LoopbackTermIndex INTEGER, pm404Ctrlline1LoopbackTermPortn EkiState } pm404Ctrlline1LoopbackTermIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline1LoopbackTerm table " ::= { pm404Ctrlline1LoopbackTermEntry 1 } pm404Ctrlline1LoopbackTermPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 1 Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver This maintenance parameter operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver " ::= { pm404Ctrlline1LoopbackTermEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline1OosMode articles --- ********************************************************* pm404Ctrlline1OosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline1OosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline1OosMode Article " ::= { pm404CtrlClient 20 } pm404Ctrlline1OosModeEntry OBJECT-TYPE SYNTAX Pm404Ctrlline1OosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline1OosMode table " INDEX { pm404Ctrlline1OosModeIndex } ::= { pm404Ctrlline1OosModeTable 1 } Pm404Ctrlline1OosModeEntry ::= SEQUENCE { pm404Ctrlline1OosModeIndex INTEGER, pm404Ctrlline1OosModePortn EkiState } pm404Ctrlline1OosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline1OosMode table " ::= { pm404Ctrlline1OosModeEntry 1 } pm404Ctrlline1OosModePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 1 Port Out Of Service :This OID sets the port Out Of Service This controls defines the service state of the line 1 port " ::= { pm404Ctrlline1OosModeEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlprotocol articles --- ********************************************************* pm404CtrlprotocolTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CtrlprotocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlprotocol Article " ::= { pm404CtrlClient 48 } pm404CtrlprotocolEntry OBJECT-TYPE SYNTAX Pm404CtrlprotocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlprotocol table " INDEX { pm404CtrlprotocolIndex } ::= { pm404CtrlprotocolTable 1 } Pm404CtrlprotocolEntry ::= SEQUENCE { pm404CtrlprotocolIndex INTEGER, pm404CtrlprotocolPortn EkiProtocol } pm404CtrlprotocolIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlprotocol table " ::= { pm404CtrlprotocolEntry 1 } pm404CtrlprotocolPortn OBJECT-TYPE SYNTAX EkiProtocol MAX-ACCESS read-write STATUS current DESCRIPTION " Lines Bitrate: This OID sets the protocol of the lines port. " ::= { pm404CtrlprotocolEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline2SfpOnoff articles --- ********************************************************* pm404Ctrlline2SfpOnoffTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline2SfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline2SfpOnoff Article " ::= { pm404CtrlLine 64 } pm404Ctrlline2SfpOnoffEntry OBJECT-TYPE SYNTAX Pm404Ctrlline2SfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline2SfpOnoff table " INDEX { pm404Ctrlline2SfpOnoffIndex } ::= { pm404Ctrlline2SfpOnoffTable 1 } Pm404Ctrlline2SfpOnoffEntry ::= SEQUENCE { pm404Ctrlline2SfpOnoffIndex INTEGER, pm404Ctrlline2SfpOnoffPortn EkiState } pm404Ctrlline2SfpOnoffIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline2SfpOnoff table " ::= { pm404Ctrlline2SfpOnoffEntry 1 } pm404Ctrlline2SfpOnoffPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 2 SFP Laser Shutdown :This OID switches off the SFP This control defines the laser state of the line 2 transceiver " ::= { pm404Ctrlline2SfpOnoffEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline2OosMode articles --- ********************************************************* pm404Ctrlline2OosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline2OosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline2OosMode Article " ::= { pm404CtrlLine 65 } pm404Ctrlline2OosModeEntry OBJECT-TYPE SYNTAX Pm404Ctrlline2OosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline2OosMode table " INDEX { pm404Ctrlline2OosModeIndex } ::= { pm404Ctrlline2OosModeTable 1 } Pm404Ctrlline2OosModeEntry ::= SEQUENCE { pm404Ctrlline2OosModeIndex INTEGER, pm404Ctrlline2OosModePortn EkiState } pm404Ctrlline2OosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline2OosMode table " ::= { pm404Ctrlline2OosModeEntry 1 } pm404Ctrlline2OosModePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 2 Port Out Of Service :This OID sets the port Out Of Service This controls defines the service state of the line 2 port " ::= { pm404Ctrlline2OosModeEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline2Loopback articles --- ********************************************************* pm404Ctrlline2LoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline2LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline2Loopback Article " ::= { pm404CtrlLine 66 } pm404Ctrlline2LoopbackEntry OBJECT-TYPE SYNTAX Pm404Ctrlline2LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline2Loopback table " INDEX { pm404Ctrlline2LoopbackIndex } ::= { pm404Ctrlline2LoopbackTable 1 } Pm404Ctrlline2LoopbackEntry ::= SEQUENCE { pm404Ctrlline2LoopbackIndex INTEGER, pm404Ctrlline2LoopbackPortn EkiState } pm404Ctrlline2LoopbackIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline2Loopback table " ::= { pm404Ctrlline2LoopbackEntry 1 } pm404Ctrlline2LoopbackPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 2 Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted This maintenance parameter operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted " ::= { pm404Ctrlline2LoopbackEntry 2 } --- ********************************************************* --- TABLE for the pm404Ctrlline2LoopbackTerm articles --- ********************************************************* pm404Ctrlline2LoopbackTermTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Ctrlline2LoopbackTermEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Ctrlline2LoopbackTerm Article " ::= { pm404CtrlLine 67 } pm404Ctrlline2LoopbackTermEntry OBJECT-TYPE SYNTAX Pm404Ctrlline2LoopbackTermEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Ctrlline2LoopbackTerm table " INDEX { pm404Ctrlline2LoopbackTermIndex } ::= { pm404Ctrlline2LoopbackTermTable 1 } Pm404Ctrlline2LoopbackTermEntry ::= SEQUENCE { pm404Ctrlline2LoopbackTermIndex INTEGER, pm404Ctrlline2LoopbackTermPortn EkiState } pm404Ctrlline2LoopbackTermIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Ctrlline2LoopbackTerm table " ::= { pm404Ctrlline2LoopbackTermEntry 1 } pm404Ctrlline2LoopbackTermPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 2 Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers This maintenance parameter operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers. " ::= { pm404Ctrlline2LoopbackTermEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pm404CtrlledTest OBJECT IDENTIFIER ::= { pm404CtrlOther 72 } pm404CtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pm404CtrlledTest 3 } pm404CtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pm404CtrlledTest 2 } pm404CtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pm404CtrlledTest 1 } --- ***************************************************** --- LEAF for the moduleOosMode article --- ***************************************************** pm404CtrlmoduleOosMode OBJECT IDENTIFIER ::= { pm404CtrlOther 73 } pm404CtrlModuleOosMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Out Of Service :This OID sets the PM Out Of Service This control defines the service state of the complete module " ::= { pm404CtrlmoduleOosMode 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm404Mesrline1Temperature articles --- ********************************************************* pm404Mesrline1TemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline1TemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline1Temperature Article " ::= { pm404MesrClient 16 } pm404Mesrline1TemperatureEntry OBJECT-TYPE SYNTAX Pm404Mesrline1TemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline1Temperature table " INDEX { pm404Mesrline1TemperatureIndex } ::= { pm404Mesrline1TemperatureTable 1 } Pm404Mesrline1TemperatureEntry ::= SEQUENCE { pm404Mesrline1TemperatureIndex INTEGER, pm404Mesrline1TemperaturePortn INTEGER } pm404Mesrline1TemperatureIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline1Temperature table " ::= { pm404Mesrline1TemperatureEntry 1 } pm404Mesrline1TemperaturePortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Temperature :This OID gives the temperature value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the line 1 transceiver " ::= { pm404Mesrline1TemperatureEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline2Temperature articles --- ********************************************************* pm404Mesrline2TemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline2TemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline2Temperature Article " ::= { pm404MesrLine 20 } pm404Mesrline2TemperatureEntry OBJECT-TYPE SYNTAX Pm404Mesrline2TemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline2Temperature table " INDEX { pm404Mesrline2TemperatureIndex } ::= { pm404Mesrline2TemperatureTable 1 } Pm404Mesrline2TemperatureEntry ::= SEQUENCE { pm404Mesrline2TemperatureIndex INTEGER, pm404Mesrline2TemperaturePortn INTEGER } pm404Mesrline2TemperatureIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline2Temperature table " ::= { pm404Mesrline2TemperatureEntry 1 } pm404Mesrline2TemperaturePortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Temperature :This OID gives the temperature value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the line 2 transceiver " ::= { pm404Mesrline2TemperatureEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline1Volt articles --- ********************************************************* pm404Mesrline1VoltTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline1VoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline1Volt Article " ::= { pm404MesrClient 24 } pm404Mesrline1VoltEntry OBJECT-TYPE SYNTAX Pm404Mesrline1VoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline1Volt table " INDEX { pm404Mesrline1VoltIndex } ::= { pm404Mesrline1VoltTable 1 } Pm404Mesrline1VoltEntry ::= SEQUENCE { pm404Mesrline1VoltIndex INTEGER, pm404Mesrline1VoltPortn INTEGER } pm404Mesrline1VoltIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline1Volt table " ::= { pm404Mesrline1VoltEntry 1 } pm404Mesrline1VoltPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) This measure gives the 3V3 voltage of the line 1 transceiver " ::= { pm404Mesrline1VoltEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline2Volt articles --- ********************************************************* pm404Mesrline2VoltTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline2VoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline2Volt Article " ::= { pm404MesrLine 28 } pm404Mesrline2VoltEntry OBJECT-TYPE SYNTAX Pm404Mesrline2VoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline2Volt table " INDEX { pm404Mesrline2VoltIndex } ::= { pm404Mesrline2VoltTable 1 } Pm404Mesrline2VoltEntry ::= SEQUENCE { pm404Mesrline2VoltIndex INTEGER, pm404Mesrline2VoltPortn INTEGER } pm404Mesrline2VoltIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline2Volt table " ::= { pm404Mesrline2VoltEntry 1 } pm404Mesrline2VoltPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Power Supply :This OID gives the 3V3 voltage value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) This measure gives the 3V3 voltage of the line 2 transceiver " ::= { pm404Mesrline2VoltEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline1TxBias articles --- ********************************************************* pm404Mesrline1TxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline1TxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline1TxBias Article " ::= { pm404MesrClient 32 } pm404Mesrline1TxBiasEntry OBJECT-TYPE SYNTAX Pm404Mesrline1TxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline1TxBias table " INDEX { pm404Mesrline1TxBiasIndex } ::= { pm404Mesrline1TxBiasTable 1 } Pm404Mesrline1TxBiasEntry ::= SEQUENCE { pm404Mesrline1TxBiasIndex INTEGER, pm404Mesrline1TxBiasPortn INTEGER } pm404Mesrline1TxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline1TxBias table " ::= { pm404Mesrline1TxBiasEntry 1 } pm404Mesrline1TxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Laser Bias :This OID gives the bias value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the line 1 transceiver " ::= { pm404Mesrline1TxBiasEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline2TxBias articles --- ********************************************************* pm404Mesrline2TxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline2TxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline2TxBias Article " ::= { pm404MesrLine 36 } pm404Mesrline2TxBiasEntry OBJECT-TYPE SYNTAX Pm404Mesrline2TxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline2TxBias table " INDEX { pm404Mesrline2TxBiasIndex } ::= { pm404Mesrline2TxBiasTable 1 } Pm404Mesrline2TxBiasEntry ::= SEQUENCE { pm404Mesrline2TxBiasIndex INTEGER, pm404Mesrline2TxBiasPortn INTEGER } pm404Mesrline2TxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline2TxBias table " ::= { pm404Mesrline2TxBiasEntry 1 } pm404Mesrline2TxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Laser Bias :This OID gives the bias value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the line 2 transceiver " ::= { pm404Mesrline2TxBiasEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline1TxPower articles --- ********************************************************* pm404Mesrline1TxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline1TxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline1TxPower Article " ::= { pm404MesrClient 40 } pm404Mesrline1TxPowerEntry OBJECT-TYPE SYNTAX Pm404Mesrline1TxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline1TxPower table " INDEX { pm404Mesrline1TxPowerIndex } ::= { pm404Mesrline1TxPowerTable 1 } Pm404Mesrline1TxPowerEntry ::= SEQUENCE { pm404Mesrline1TxPowerIndex INTEGER, pm404Mesrline1TxPowerPortn INTEGER } pm404Mesrline1TxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline1TxPower table " ::= { pm404Mesrline1TxPowerEntry 1 } pm404Mesrline1TxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Tx Power :This OID gives the transmit power value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the line 1 transceiver " ::= { pm404Mesrline1TxPowerEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline2TxPower articles --- ********************************************************* pm404Mesrline2TxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline2TxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline2TxPower Article " ::= { pm404MesrLine 44 } pm404Mesrline2TxPowerEntry OBJECT-TYPE SYNTAX Pm404Mesrline2TxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline2TxPower table " INDEX { pm404Mesrline2TxPowerIndex } ::= { pm404Mesrline2TxPowerTable 1 } Pm404Mesrline2TxPowerEntry ::= SEQUENCE { pm404Mesrline2TxPowerIndex INTEGER, pm404Mesrline2TxPowerPortn INTEGER } pm404Mesrline2TxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline2TxPower table " ::= { pm404Mesrline2TxPowerEntry 1 } pm404Mesrline2TxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Tx Power :This OID gives the transmit power value of the SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the line 2 transceiver " ::= { pm404Mesrline2TxPowerEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline1RxPower articles --- ********************************************************* pm404Mesrline1RxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline1RxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline1RxPower Article " ::= { pm404MesrClient 48 } pm404Mesrline1RxPowerEntry OBJECT-TYPE SYNTAX Pm404Mesrline1RxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline1RxPower table " INDEX { pm404Mesrline1RxPowerIndex } ::= { pm404Mesrline1RxPowerTable 1 } Pm404Mesrline1RxPowerEntry ::= SEQUENCE { pm404Mesrline1RxPowerIndex INTEGER, pm404Mesrline1RxPowerPortn INTEGER } pm404Mesrline1RxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline1RxPower table " ::= { pm404Mesrline1RxPowerEntry 1 } pm404Mesrline1RxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 1 SFP Rx Power :This OID gives the receive power value of the SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the line 1 transceiver " ::= { pm404Mesrline1RxPowerEntry 2 } --- ********************************************************* --- TABLE for the pm404Mesrline2RxPower articles --- ********************************************************* pm404Mesrline2RxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404Mesrline2RxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm404Mesrline2RxPower Article " ::= { pm404MesrLine 52 } pm404Mesrline2RxPowerEntry OBJECT-TYPE SYNTAX Pm404Mesrline2RxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm404Mesrline2RxPower table " INDEX { pm404Mesrline2RxPowerIndex } ::= { pm404Mesrline2RxPowerTable 1 } Pm404Mesrline2RxPowerEntry ::= SEQUENCE { pm404Mesrline2RxPowerIndex INTEGER, pm404Mesrline2RxPowerPortn INTEGER } pm404Mesrline2RxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm404Mesrline2RxPower table " ::= { pm404Mesrline2RxPowerEntry 1 } pm404Mesrline2RxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line 2 SFP Rx Power :This OID gives the receive power value of the SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the line 2 transceiver " ::= { pm404Mesrline2RxPowerEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group lsd --- ***************************************************** pm404CfgLsd OBJECT IDENTIFIER ::= { pm404Config 1 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm404CfgLine1LsdTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CfgLine1LsdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm404CfgLsd 1 } pm404CfgLine1LsdEntry OBJECT-TYPE SYNTAX Pm404CfgLine1LsdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the lsd table " INDEX { pm404CfgLine1LsdIndex } ::= { pm404CfgLine1LsdTable 1 } Pm404CfgLine1LsdEntry ::= SEQUENCE { pm404CfgLine1LsdIndex INTEGER, pm404CfgLine1LsdModePortn Unsigned32, pm404CfgLine1AccessioCtrbInsPortn Unsigned32, pm404CfgLine2AccessioCtrbInsPortn Unsigned32 } pm404CfgLine1LsdIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the line1Lsd table " ::= { pm404CfgLine1LsdEntry 1 } pm404CfgLine1LsdModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Lines Port :This register selects the way to activate the laser upon CAIS/CSF criteria detection on Port " ::= { pm404CfgLine1LsdEntry 3 } pm404CfgLine1AccessioCtrbInsPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Line 1 Port :This register selects the contributors to upstream CAIS/CSF on Port " ::= { pm404CfgLine1LsdEntry 4 } pm404CfgLine2AccessioCtrbInsPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Lne 2 Port :This register selects the contributors to downstream CAIS/CSF on Port " ::= { pm404CfgLine1LsdEntry 7 } --- ***************************************************** --- LEAF for the table Group startUp --- ***************************************************** pm404CfgStartUp OBJECT IDENTIFIER ::= { pm404Config 2 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm404CfgLine1StartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CfgLine1StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm404CfgStartUp 1 } pm404CfgLine1StartupEntry OBJECT-TYPE SYNTAX Pm404CfgLine1StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startUp table " INDEX { pm404CfgLine1StartupIndex } ::= { pm404CfgLine1StartupTable 1 } Pm404CfgLine1StartupEntry ::= SEQUENCE { pm404CfgLine1StartupIndex INTEGER, pm404CfgLine1TrscvCtrlPortn Unsigned32, pm404CfgLine1ProtocolPortn Unsigned32, pm404CfgLine1OosModePortn Unsigned32 } pm404CfgLine1StartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the line1Startup table " ::= { pm404CfgLine1StartupEntry 1 } pm404CfgLine1TrscvCtrlPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 1 TRSCV :This register configures the default initialisation settings on client transceiver. " ::= { pm404CfgLine1StartupEntry 3 } pm404CfgLine1ProtocolPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Protocol on Line 1 :This register configures the default initialisation protocol on the port. " ::= { pm404CfgLine1StartupEntry 4 } pm404CfgLine1OosModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 1 TRSCV :This register configures the default initialisation settings on client transceiver. " ::= { pm404CfgLine1StartupEntry 5 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm404CfgLine2StartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CfgLine2StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm404CfgStartUp 2 } pm404CfgLine2StartupEntry OBJECT-TYPE SYNTAX Pm404CfgLine2StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startUp table " INDEX { pm404CfgLine2StartupIndex } ::= { pm404CfgLine2StartupTable 1 } Pm404CfgLine2StartupEntry ::= SEQUENCE { pm404CfgLine2StartupIndex INTEGER, pm404CfgLine2TrscvCtrlPortn Unsigned32, pm404CfgLine2OosModePortn Unsigned32 } pm404CfgLine2StartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the line2Startup table " ::= { pm404CfgLine2StartupEntry 1 } pm404CfgLine2TrscvCtrlPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 2 TRSCV :This register configures the default initialisation settings on line transceiver. " ::= { pm404CfgLine2StartupEntry 3 } pm404CfgLine2OosModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 2 TRSCV :This register configures the default initialisation settings on line transceiver. " ::= { pm404CfgLine2StartupEntry 4 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pm404CfgLabels OBJECT IDENTIFIER ::= { pm404Config 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm404CfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm404CfgLabels 1 } pm404CfgLabelclientEntry OBJECT-TYPE SYNTAX Pm404CfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm404CfgLabelclientIndex } ::= { pm404CfgLabelclientTable 1 } Pm404CfgLabelclientEntry ::= SEQUENCE { pm404CfgLabelclientIndex INTEGER, pm404CfgLabelclientPortn DisplayString } pm404CfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pm404CfgLabelclientEntry 1 } pm404CfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pm404CfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm404CfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm404CfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm404CfgLabels 2 } pm404CfgLabellineEntry OBJECT-TYPE SYNTAX Pm404CfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm404CfgLabellineIndex } ::= { pm404CfgLabellineTable 1 } Pm404CfgLabellineEntry ::= SEQUENCE { pm404CfgLabellineIndex INTEGER, pm404CfgLabellinePortn DisplayString } pm404CfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pm404CfgLabellineEntry 1 } pm404CfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pm404CfgLabellineEntry 3 } pm404CfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pm404Config 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pm404trapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pm404traps 2 } pm404trapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pm404traps 3 } pm404trapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pm404traps 4 } --- ***************************************************** --- LINE2 TRAPS --- ***************************************************** pm404Line2TrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine2DdmWarningPortn, pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm404AlmLine2DdmWarningPortn "on", pm404trapLineNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Warning appears on Media Converter $2 of Line 2 of PM404 in slot $3 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pm404traps 30 } pm404Line2TrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine2DdmWarningPortn, pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 2 Not Urgent ON"} --&MATCH { pm404AlmLine2DdmWarningPortn "on", pm404trapLineNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Warning disappears on Media Converter $2 of Line 2 of PM404 in slot $3 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pm404traps 31 } pm404Line2TrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine2DdmAlmPortn, pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Urgent ON" --&ACTIONS { log, major } --&MATCH { pm404AlmLine2DdmAlmPortn "on", pm404trapLineNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Alarm appears on Media Converter $2 of Line 2 of PM404 in slot $3 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pm404traps 32 } pm404Line2TrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine2DdmAlmPortn, pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 2 Urgent ON"} --&MATCH { pm404AlmLine2DdmAlmPortn "on", pm404trapLineNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Media Converter $2 of Line 2 of PM404 in slot $3 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pm404traps 33 } pm404Line2TrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine2FailPortn , pm404AlmLine2HwFailPortn , pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Fail ON" --&ACTIONS { log, critical } --&MATCH { pm404AlmLine2FailPortn "on", pm404AlmLine2HwFailPortn "*", pm404trapLineNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 2 Down on PM404 in Slot $4 ($A)" --&FILTNAME "PM404 Line 2 HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm404AlmLine2FailPortn "*", pm404AlmLine2HwFailPortn "on", pm404trapLineNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 2 Down on PM404 in Slot $4 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pm404traps 34 } pm404Line2TrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine2FailPortn , pm404AlmLine2HwFailPortn , pm404trapLineNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 2 Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 2 Fail ON"} --&MATCH { pm404AlmLine2FailPortn "on", pm404AlmLine2HwFailPortn "*", pm404trapLineNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 2 Up on PM404 in Slot $4 ($A)" --&FILTNAME "PM404 Line 2 HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm404AlmLine2FailPortn "*", pm404AlmLine2HwFailPortn "on", pm404trapLineNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 2 Up on PM404 in Slot $4 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pm404traps 35 } --- ***************************************************** --- Line1 TRAPS --- ***************************************************** pm404Line1TrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine1SfpDdmWarningPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm404AlmLine1SfpDdmWarningPortn "on", pm404trapPortNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Warning appears on Media Converter $2 of Line 1 of PM404 in slot $3 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pm404traps 40 } pm404Line1TrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine1SfpDdmWarningPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 1 Not Urgent ON"} --&MATCH { pm404AlmLine1SfpDdmWarningPortn "on", pm404trapPortNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Warning disappears on Media Converter $2 of Line 1 of PM404 in slot $3 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pm404traps 41 } pm404Line1TrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine1SfpDdmAlmPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Urgent ON" --&ACTIONS { log, major } --&MATCH { pm404AlmLine1SfpDdmAlmPortn "on", pm404trapPortNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Alarm appears on Media Converter $2 of Line 1 of PM404 in slot $3 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pm404traps 42 } pm404Line1TrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine1SfpDdmAlmPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Urgent OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 1 Urgent ON"} --&MATCH { pm404AlmLine1SfpDdmAlmPortn "on", pm404trapPortNumber "$2", pm404trapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Media Converter $2 of Line 1 of PM404 in slot $3 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pm404traps 43 } pm404Line1TrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmLine1FailAccPortn, pm404AlmLine1HwFailAccPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Fail ON" --&ACTIONS { log, critical } --&MATCH { pm404AlmLine1FailAccPortn "on", pm404AlmLine1HwFailAccPortn "*", pm404trapPortNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 1 Down on PM404 in Slot $4 ($A)" --&FILTNAME "PM404 Line 1 HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm404AlmLine1FailAccPortn "*", pm404AlmLine1HwFailAccPortn "on", pm404trapPortNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 1 Down on PM404 in Slot $4 ($A)" DESCRIPTION "Critical client default is activated" ::= { pm404traps 44 } pm404Line1TrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmLine1FailAccPortn, pm404AlmLine1HwFailAccPortn, pm404trapPortNumber, pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Line 1 Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PM404 Line 1 Fail ON"} --&MATCH { pm404AlmLine1FailAccPortn "on", pm404AlmLine1HwFailAccPortn "*", pm404trapPortNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 1 Up on PM404 in Slot $4 ($A)" --&FILTNAME "PM404 Line 1 HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm404AlmLine1FailAccPortn "*", pm404AlmLine1HwFailAccPortn "on", pm404trapPortNumber "$3", pm404trapBoardNumber "$4"} --&MESG "Media Converter $3 of Line Port 1 Up on PM404 in Slot $4 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pm404traps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pm404PowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm404AlmDefFuseB, pm404AlmDefFuseA , pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pm404AlmDefFuseB "*", pm404AlmDefFuseA "on", pm404trapBoardNumber "$3"} --&MESG "Power Input A Fail on PM404 in Slot $3 ($A)" --&FILTNAME "PMMC Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pm404AlmDefFuseB "on", pm404AlmDefFuseA "*", pm404trapBoardNumber "$3"} --&MESG "Power Input B Fail on PM404 in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pm404traps 50 } pm404PowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm404AlmDefFuseB, pm404AlmDefFuseA , pm404trapBoardNumber} STATUS current --&FILTNAME "PM404 Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PM404 Fuse A Fail ON", "PM404 Fuse B Fail ON" } --&MATCH { pm404AlmDefFuseB "on", pm404AlmDefFuseA "on", pm404trapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PM404 in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pm404traps 51 } END