-- ***************************************************************** -- EKINOPS-Pm1004dcp.TXT: MIB -- --MIB Part Number:3MI00018AFAE --MIB Version:03 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pm1004dcp-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePm1004dcp MODULE-IDENTITY LAST-UPDATED "201606020000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net" DESCRIPTION "MIB for managing Ekinops modules with PM1004DC software" REVISION "200911100000Z" DESCRIPTION "Initial Version." REVISION "200902170000Z" DESCRIPTION "Creation" REVISION "200902170000Z" DESCRIPTION "Inital version" REVISION "200904070000Z" DESCRIPTION "DCC Storm info suppress" REVISION "200909300000Z" DESCRIPTION "Add CondType parameters" REVISION "201002150000Z" DESCRIPTION "Probcause,AlarmType - NMS" REVISION "201107250000Z" DESCRIPTION "Event fixed" REVISION "201207030000Z" DESCRIPTION "Minor cosmetic updates" REVISION "201304030000Z" DESCRIPTION "S1,K1,K2 suppress" REVISION "201403270000Z" DESCRIPTION "Probcause,AlarmType - NMS completion" REVISION "201412220000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201605190000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" REVISION "201606020000Z" DESCRIPTION "Capabilities objects of Table 5" ::= { ekinops 37 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pm1004dcpalarms OBJECT IDENTIFIER ::= { modulePm1004dcp 2 } pm1004dcpAlmOther OBJECT IDENTIFIER ::= { pm1004dcpalarms 1 } pm1004dcpAlmOtherNurg OBJECT IDENTIFIER ::= { pm1004dcpAlmOther 1 } pm1004dcpAlmOtherUrg OBJECT IDENTIFIER ::= { pm1004dcpAlmOther 2 } pm1004dcpAlmOtherCrit OBJECT IDENTIFIER ::= { pm1004dcpAlmOther 3 } pm1004dcpAlmClient OBJECT IDENTIFIER ::= { pm1004dcpalarms 2 } pm1004dcpAlmClientNurg OBJECT IDENTIFIER ::= { pm1004dcpAlmClient 1 } pm1004dcpAlmClientUrg OBJECT IDENTIFIER ::= { pm1004dcpAlmClient 2 } pm1004dcpAlmClientCrit OBJECT IDENTIFIER ::= { pm1004dcpAlmClient 3 } pm1004dcpAlmLine OBJECT IDENTIFIER ::= { pm1004dcpalarms 3 } pm1004dcpAlmLineNurg OBJECT IDENTIFIER ::= { pm1004dcpAlmLine 1 } pm1004dcpAlmLineUrg OBJECT IDENTIFIER ::= { pm1004dcpAlmLine 2 } pm1004dcpAlmLineCrit OBJECT IDENTIFIER ::= { pm1004dcpAlmLine 3 } pm1004dcpmeasures OBJECT IDENTIFIER ::= { modulePm1004dcp 3 } pm1004dcpMesrOther OBJECT IDENTIFIER ::= { pm1004dcpmeasures 1 } pm1004dcpMesrClient OBJECT IDENTIFIER ::= { pm1004dcpmeasures 2 } pm1004dcpMesrLine OBJECT IDENTIFIER ::= { pm1004dcpmeasures 3 } pm1004dcpcounters OBJECT IDENTIFIER ::= { modulePm1004dcp 4 } pm1004dcpCntOther OBJECT IDENTIFIER ::= { pm1004dcpcounters 1 } pm1004dcpCntClient OBJECT IDENTIFIER ::= { pm1004dcpcounters 2 } pm1004dcpCntLine OBJECT IDENTIFIER ::= { pm1004dcpcounters 3 } pm1004dcpcontrolsWrite OBJECT IDENTIFIER ::= { modulePm1004dcp 6 } pm1004dcpCtrlOther OBJECT IDENTIFIER ::= { pm1004dcpcontrolsWrite 1 } pm1004dcpCtrlClient OBJECT IDENTIFIER ::= { pm1004dcpcontrolsWrite 2 } pm1004dcpCtrlLine OBJECT IDENTIFIER ::= { pm1004dcpcontrolsWrite 3 } pm1004dcpri OBJECT IDENTIFIER ::= { modulePm1004dcp 7 } pm1004dcpriTable OBJECT IDENTIFIER ::= { pm1004dcpri 1 } pm1004dcpdownload OBJECT IDENTIFIER ::= { modulePm1004dcp 8 } pm1004dcpDwlOther OBJECT IDENTIFIER ::= { pm1004dcpdownload 1 } pm1004dcpDwlClient OBJECT IDENTIFIER ::= { pm1004dcpdownload 2 } pm1004dcpDwlLine OBJECT IDENTIFIER ::= { pm1004dcpdownload 3 } pm1004dcpConfig OBJECT IDENTIFIER ::= { modulePm1004dcp 9 } pm1004dcptraps OBJECT IDENTIFIER ::= { modulePm1004dcp 10 } pm1004dcpMonitoring OBJECT IDENTIFIER ::= { modulePm1004dcp 11} pm1004dcpMonOther OBJECT IDENTIFIER ::= { pm1004dcpMonitoring 1 } pm1004dcpMonSync OBJECT IDENTIFIER ::= { pm1004dcpMonOther 1 } pm1004dcpMonTimeStamp OBJECT IDENTIFIER ::= { pm1004dcpMonOther 2 } pm1004dcpMonClient OBJECT IDENTIFIER ::= { pm1004dcpMonitoring 2 } pm1004dcpMonClientPerformance OBJECT IDENTIFIER ::= { pm1004dcpMonClient 1 } pm1004dcpMonClientTraceIdentifier OBJECT IDENTIFIER ::= { pm1004dcpMonClient 2 } pm1004dcpMonLine OBJECT IDENTIFIER ::= { pm1004dcpMonitoring 3 } pm1004dcpMonLinePerformance OBJECT IDENTIFIER ::= { pm1004dcpMonLine 1 } pm1004dcpMonLineTraceIdentifier OBJECT IDENTIFIER ::= { pm1004dcpMonLine 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** Pm1004dcpModeTimeSlot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different mode for time slot" SYNTAX INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } Pm1004dcpModeAddDropA ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different mode for client A" SYNTAX INTEGER { passThroughA(1), addDropTsA(2), splitSelectTsA(4) } Pm1004dcpModeAddDrop ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different mode for client B" SYNTAX INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } Pm1004dcpProtectionTimeSlot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "protection for control" SYNTAX INTEGER { auto(0), manualX1Line1(257), manualX2Line2(513) } Pm1004dcpProtectionStartUp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "protection for startup" SYNTAX INTEGER { auto(2), manualX2Line2(0), manualX1Line1(1) } Pm1004dcpDccMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Mode for DCC" SYNTAX INTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) } Pm1004dcpOtxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OTX-TLH on line ports" SYNTAX INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } Pm1004dcpOtxGrid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different grids on OTX-TLH on line ports" SYNTAX INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } Pm1004dcpAdjustValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values in Adjust mode on OTX-TLH on line ports" SYNTAX INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } Pm1004dcpOtxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on OTX-TLH on line ports" SYNTAX INTEGER --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm1004dcpRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pm1004dcpri 2 } pm1004dcpRinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pm1004dcpri 3 } pm1004dcpRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pm1004dcpri 4 } pm1004dcpRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pm1004dcpri 5 } pm1004dcpRinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform desciption: This OID contains the description of the Gateware platform." ::= { pm1004dcpri 6 } pm1004dcpRinvSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm1004dcpriTable 1 } pm1004dcpRinvSfpEntry OBJECT-TYPE SYNTAX Pm1004dcpRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the SFP table" INDEX { pm1004dcpRinvSfpIndex } ::= { pm1004dcpRinvSfpTable 1 } Pm1004dcpRinvSfpEntry::= SEQUENCE { pm1004dcpRinvSfpIndex Integer32, pm1004dcpRinvsfp DisplayString } pm1004dcpRinvSfpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pm1004dcpRinvSfpEntry 1 } pm1004dcpRinvsfp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the SFP" ::= { pm1004dcpRinvSfpEntry 2 } pm1004dcpRinvLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the XFPs on the selected module" ::= { pm1004dcpriTable 2 } pm1004dcpRinvLineEntry OBJECT-TYPE SYNTAX Pm1004dcpRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the XFP table" INDEX { pm1004dcpRinvLineIndex } ::= { pm1004dcpRinvLineTable 1 } Pm1004dcpRinvLineEntry::= SEQUENCE { pm1004dcpRinvLineIndex Integer32, pm1004dcpRinvxfpLine DisplayString } pm1004dcpRinvLineIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for XFP table" ::= { pm1004dcpRinvLineEntry 1 } pm1004dcpRinvxfpLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the XFP: This OID contains the inventory for the XFP" ::= { pm1004dcpRinvLineEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pm1004dcpAlmsynthAlm0 OBJECT IDENTIFIER ::= { pm1004dcpAlmOtherCrit 0 } pm1004dcpAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsynthAlm0 16 } pm1004dcpAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsynthAlm0 15 } pm1004dcpAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the PM MOD_GLOB_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlm0 9 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pm1004dcpAlmsynthAlm2 OBJECT IDENTIFIER ::= { pm1004dcpAlmOtherNurg 2 } pm1004dcpAlmMaintenanceOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the PM is in maintenance mode. This alarm indicates that the maintenance mode is enabled on the PM MAINTENANCE_ON other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlm2 5 } pm1004dcpAlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlm2 4 } pm1004dcpAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlm2 3 } pm1004dcpAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlm2 2 } pm1004dcpAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pm1004dcpAlmsynthAlmLine articles --- ********************************************************* pm1004dcpAlmsynthAlmLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmsynthAlmLine Article " ::= { pm1004dcpAlmLineCrit 7 } pm1004dcpAlmsynthAlmLineEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmsynthAlmLine table " INDEX { pm1004dcpAlmsynthAlmLineIndex } ::= { pm1004dcpAlmsynthAlmLineTable 1 } Pm1004dcpAlmsynthAlmLineEntry ::= SEQUENCE { pm1004dcpAlmsynthAlmLineIndex INTEGER, pm1004dcpAlmLineFailPortn EkiOnOff, pm1004dcpAlmLineDdmAlmPortn EkiOnOff, pm1004dcpAlmLineDdmWarningPortn EkiOnOff, pm1004dcpAlmUpRdiInsPortn EkiOnOff, pm1004dcpAlmLineLocalOosPortn EkiOnOff, pm1004dcpAlmXfpTxOffPortn EkiOnOff, pm1004dcpAlmLineHwFailPortn EkiOnOff, pm1004dcpAlmXfpInitNotComplPortn EkiOnOff, pm1004dcpAlmXfpAbsentPortn EkiOnOff } pm1004dcpAlmsynthAlmLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmsynthAlmLine table " ::= { pm1004dcpAlmsynthAlmLineEntry 1 } pm1004dcpAlmLineFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 13 } pm1004dcpAlmLineDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM This alarm indicates if a DDM Warning has been detected on the line transceiver LINE_DDM_ALM equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 11 } pm1004dcpAlmLineDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM This status indicates if a MS-RDI/L-RDI is currently inserted on the line interface. LINE_DDM_WARNING equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 10 } pm1004dcpAlmUpRdiInsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SM-BDI Inserted On Line :This OID indicates an upstream SM-BDI has been inserted in the outgoing G709 signal. This status indicates if a SM-BDI is currently inserted on the line interface. UP_RDI_INS informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 9 } pm1004dcpAlmLineLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) This status indicates if the line port is in service LINE_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 7 } pm1004dcpAlmXfpTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on This status indicates if the line transceiver laser is ON or OFF XFP_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 6 } pm1004dcpAlmLineHwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmLineEntry 5 } pm1004dcpAlmXfpInitNotComplPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. This status indicates if the line transceiver has been correctly initialized XFP_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004dcpAlmsynthAlmLineEntry 3 } pm1004dcpAlmXfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. This alarm indicates if the line transceiver is present. XFP_ABSENT inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004dcpAlmsynthAlmLineEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmsynthAlmPort articles --- ********************************************************* pm1004dcpAlmsynthAlmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmsynthAlmPort Article " ::= { pm1004dcpAlmClientCrit 8 } pm1004dcpAlmsynthAlmPortEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmsynthAlmPort table " INDEX { pm1004dcpAlmsynthAlmPortIndex } ::= { pm1004dcpAlmsynthAlmPortTable 1 } Pm1004dcpAlmsynthAlmPortEntry ::= SEQUENCE { pm1004dcpAlmsynthAlmPortIndex INTEGER, pm1004dcpAlmUpCsfPortn EkiOnOff, pm1004dcpAlmClientActivePortn EkiOnOff, pm1004dcpAlmFailAccPortn EkiOnOff, pm1004dcpAlmSfpDdmAlmPortn EkiOnOff, pm1004dcpAlmSfpDdmWarningPortn EkiOnOff, pm1004dcpAlmDwCaisPortn EkiOnOff, pm1004dcpAlmClientRemoteOosPortn EkiOnOff, pm1004dcpAlmClientLocalOosPortn EkiOnOff, pm1004dcpAlmDwLsdPortn EkiOnOff, pm1004dcpAlmHwFailAccPortn EkiOnOff, pm1004dcpAlmDdmAbsentPortn EkiOnOff, pm1004dcpAlmSfpAbsentPortn EkiOnOff } pm1004dcpAlmsynthAlmPortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmsynthAlmPort table " ::= { pm1004dcpAlmsynthAlmPortEntry 1 } pm1004dcpAlmUpCsfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. This status indicates if a Client Signal Fail is currently inserted on the line signal for this client port UP_CSF_1 other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 17 } pm1004dcpAlmClientActivePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Sink (Line1 Or Line2) :This bit indicates the Client #n is active on receive side This status indicates whether the Client is extracted from Line 1 or Line 2. CLIENT_ACTIVE other (1) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 16 } pm1004dcpAlmFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Access Fail :This OID indicates a failure on the Client port FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 13 } pm1004dcpAlmSfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM This alarm indicates if a DDM Alarm has been detected on the client transceiver SFP_DDM_ALM_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 11 } pm1004dcpAlmSfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM This alarm indicates if a DDM Warning has been detected on the client transceiver SFP_DDM_WARNING_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 10 } pm1004dcpAlmDwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface DW_CAIS_1 informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 9 } pm1004dcpAlmClientRemoteOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) This status indicates if the remote client port is in service CLIENT_REMOTE_OOS informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 8 } pm1004dcpAlmClientLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) This status indicates if the local client port is in service CLIENT_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 7 } pm1004dcpAlmDwLsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. This status indicates if the client transceiver laser is ON or OFF DW_LSD_1 other (1) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 6 } pm1004dcpAlmHwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. HW_FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 5 } pm1004dcpAlmDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function This status indicates if the client transceiver includes the DDM feature DDM_ABSENT_1 informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmsynthAlmPortEntry 3 } pm1004dcpAlmSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Absent :This OID indicates that the SFP module is not present in the client port. This alarm indicates if the client transceiver is present. SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004dcpAlmsynthAlmPortEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmaccessioAlm articles --- ********************************************************* pm1004dcpAlmaccessioAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmaccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmaccessioAlm Article " ::= { pm1004dcpAlmClientCrit 16 } pm1004dcpAlmaccessioAlmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmaccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmaccessioAlm table " INDEX { pm1004dcpAlmaccessioAlmIndex } ::= { pm1004dcpAlmaccessioAlmTable 1 } Pm1004dcpAlmaccessioAlmEntry ::= SEQUENCE { pm1004dcpAlmaccessioAlmIndex INTEGER, pm1004dcpAlmUpLosPortn EkiOnOff, pm1004dcpAlmDwLasFailPortn EkiOnOff } pm1004dcpAlmaccessioAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmaccessioAlm table " ::= { pm1004dcpAlmaccessioAlmEntry 1 } pm1004dcpAlmUpLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port This alarm indicates if an optical signal is detected on the client transceiver input UP_LOS_1 receiveFailure (41) physicalViolation (9) (2) " ::= { pm1004dcpAlmaccessioAlmEntry 5 } pm1004dcpAlmDwLasFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm generated by the SFPs) This alarm indicates if the laser of the client transceiver is in fail condition DW_LAS_FAIL_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmaccessioAlmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmsfpAlmDdm articles --- ********************************************************* pm1004dcpAlmsfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmsfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmsfpAlmDdm Article " ::= { pm1004dcpAlmClientUrg 32 } pm1004dcpAlmsfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmsfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmsfpAlmDdm table " INDEX { pm1004dcpAlmsfpAlmDdmIndex } ::= { pm1004dcpAlmsfpAlmDdmTable 1 } Pm1004dcpAlmsfpAlmDdmEntry ::= SEQUENCE { pm1004dcpAlmsfpAlmDdmIndex INTEGER, pm1004dcpAlmRxPwrHighAlaPortn EkiOnOff, pm1004dcpAlmRxPwrLowAlaPortn EkiOnOff, pm1004dcpAlmTempHighAlaPortn EkiOnOff, pm1004dcpAlmTempLowAlaPortn EkiOnOff, pm1004dcpAlmVccHighAlaPortn EkiOnOff, pm1004dcpAlmVccLowAlaPortn EkiOnOff, pm1004dcpAlmTxBiasHighAlaPortn EkiOnOff, pm1004dcpAlmTxBiasLowAlaPortn EkiOnOff, pm1004dcpAlmTxPwrHighAlaPortn EkiOnOff, pm1004dcpAlmTxPwrLowAlaPortn EkiOnOff } pm1004dcpAlmsfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmsfpAlmDdm table " ::= { pm1004dcpAlmsfpAlmDdmEntry 1 } pm1004dcpAlmRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 17 } pm1004dcpAlmRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 16 } pm1004dcpAlmTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 9 } pm1004dcpAlmTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 8 } pm1004dcpAlmVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 7 } pm1004dcpAlmVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 6 } pm1004dcpAlmTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 5 } pm1004dcpAlmTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 4 } pm1004dcpAlmTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 3 } pm1004dcpAlmTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmsfpWarnDdm articles --- ********************************************************* pm1004dcpAlmsfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmsfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmsfpWarnDdm Article " ::= { pm1004dcpAlmClientNurg 48 } pm1004dcpAlmsfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmsfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmsfpWarnDdm table " INDEX { pm1004dcpAlmsfpWarnDdmIndex } ::= { pm1004dcpAlmsfpWarnDdmTable 1 } Pm1004dcpAlmsfpWarnDdmEntry ::= SEQUENCE { pm1004dcpAlmsfpWarnDdmIndex INTEGER, pm1004dcpAlmRxPwrHighWngPortn EkiOnOff, pm1004dcpAlmRxPwrLowWngPortn EkiOnOff, pm1004dcpAlmTempHighWngPortn EkiOnOff, pm1004dcpAlmTempLowWngPortn EkiOnOff, pm1004dcpAlmVccHighWngPortn EkiOnOff, pm1004dcpAlmVccLowWngPortn EkiOnOff, pm1004dcpAlmTxBiasHighWngPortn EkiOnOff, pm1004dcpAlmTxBiasLowWngPortn EkiOnOff, pm1004dcpAlmTxPwrHighWngPortn EkiOnOff, pm1004dcpAlmTxPwLowWngPortn EkiOnOff } pm1004dcpAlmsfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmsfpWarnDdm table " ::= { pm1004dcpAlmsfpWarnDdmEntry 1 } pm1004dcpAlmRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 17 } pm1004dcpAlmRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 16 } pm1004dcpAlmTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 9 } pm1004dcpAlmTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 8 } pm1004dcpAlmVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 7 } pm1004dcpAlmVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 6 } pm1004dcpAlmTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 5 } pm1004dcpAlmTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 4 } pm1004dcpAlmTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 3 } pm1004dcpAlmTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmsfpWarnDdmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmmapperDeAlm articles --- ********************************************************* pm1004dcpAlmmapperDeAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmmapperDeAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmmapperDeAlm Article " ::= { pm1004dcpAlmClientCrit 72 } pm1004dcpAlmmapperDeAlmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmmapperDeAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmmapperDeAlm table " INDEX { pm1004dcpAlmmapperDeAlmIndex } ::= { pm1004dcpAlmmapperDeAlmTable 1 } Pm1004dcpAlmmapperDeAlmEntry ::= SEQUENCE { pm1004dcpAlmmapperDeAlmIndex INTEGER, pm1004dcpAlmDwBufferOvlPortn EkiOnOff, pm1004dcpAlmDwCsfDetPortn EkiOnOff, pm1004dcpAlmUpBufferOvlPortn EkiOnOff, pm1004dcpAlmUpAccOosPortn EkiOnOff } pm1004dcpAlmmapperDeAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmmapperDeAlm table " ::= { pm1004dcpAlmmapperDeAlmEntry 1 } pm1004dcpAlmDwBufferOvlPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. This alarm indicates if there is a downstream FIFO overload for this client port DW_BUFFER_OVL_1 equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmmapperDeAlmEntry 15 } pm1004dcpAlmDwCsfDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this client port DW_CSF_DET_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmmapperDeAlmEntry 12 } pm1004dcpAlmUpBufferOvlPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. This alarm indicates if there is a upstream FIFO overload for this client port UP_BUFFER_OVL_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmmapperDeAlmEntry 11 } pm1004dcpAlmUpAccOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Loss Of Frame :This OID indicates the upstream client input port is in Loss of Frame condition This alarm indicates if there is a Loss of Frame is detected on the client input signal UP_ACC_OOS_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmmapperDeAlmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmk1K2Client articles --- ********************************************************* pm1004dcpAlmk1K2ClientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmk1K2ClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmk1K2Client Article " ::= { pm1004dcpAlmClientNurg 96 } pm1004dcpAlmk1K2ClientEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmk1K2ClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmk1K2Client table " INDEX { pm1004dcpAlmk1K2ClientIndex } ::= { pm1004dcpAlmk1K2ClientTable 1 } Pm1004dcpAlmk1K2ClientEntry ::= SEQUENCE { pm1004dcpAlmk1K2ClientIndex INTEGER, pm1004dcpAlmk1K2ClientPortn INTEGER } pm1004dcpAlmk1K2ClientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmk1K2Client table " ::= { pm1004dcpAlmk1K2ClientEntry 1 } pm1004dcpAlmk1K2ClientPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client K1-K2 Extracted Value :This OID gives the value of K1 (LSB) and K2 (MSB) extracted from the overhead of the received OC-48c/STM-16c signal CLIENT_1_K1_8 other (1) other (1) (2) " ::= { pm1004dcpAlmk1K2ClientEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmaccessioSdhAlarm articles --- ********************************************************* pm1004dcpAlmaccessioSdhAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmaccessioSdhAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmaccessioSdhAlarm Article " ::= { pm1004dcpAlmClientCrit 104 } pm1004dcpAlmaccessioSdhAlarmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmaccessioSdhAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmaccessioSdhAlarm table " INDEX { pm1004dcpAlmaccessioSdhAlarmIndex } ::= { pm1004dcpAlmaccessioSdhAlarmTable 1 } Pm1004dcpAlmaccessioSdhAlarmEntry ::= SEQUENCE { pm1004dcpAlmaccessioSdhAlarmIndex INTEGER, pm1004dcpAlmClientOofPortn EkiOnOff, pm1004dcpAlmClientRdiDetPortn EkiOnOff, pm1004dcpAlmClientAisDetPortn EkiOnOff, pm1004dcpAlmTxLossOfLockPortn EkiOnOff, pm1004dcpAlmRxLossOfLockPortn EkiOnOff, pm1004dcpAlmFifoErrPortn EkiOnOff } pm1004dcpAlmaccessioSdhAlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmaccessioSdhAlarm table " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 1 } pm1004dcpAlmClientOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Out Of Frame :This OID indicates that an Out Of Frame condition has been detected on the OC-48/STM-16 client input stream This alarm indicates if there is a Out of Frame is detected on the client input signal CLIENT_OOF_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 8 } pm1004dcpAlmClientRdiDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client MS-RDI :This OID indicates that a MS-RDI has been detected on the client input stream This alarm indicates if there is a MS-RDI/L-RDI is detected on the client input signal CLIENT_RDI_DET_1 remoteNodeTransmissionError (43) other (1) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 7 } pm1004dcpAlmClientAisDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client MS-AIS :This OID indicates that a MS-AIS has been detected on the client input stream This alarm indicates if there is a MS-AIS/L-AIS is detected on the client input signal CLIENT_AIS_DET_1 receiveFailure (41) operationalViolation (8) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 6 } pm1004dcpAlmTxLossOfLockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Tx Clock Lock Error :This OID indicates that the transmit clock of the client transceiver is not locke TX_LOSS_OF_LOCK_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 5 } pm1004dcpAlmRxLossOfLockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Rx Clock Lock Error :This OID indicates the recovered receive clock of the client transceiver is not locked RX_LOSS_OF_LOCK_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 4 } pm1004dcpAlmFifoErrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Transceiver Fifo Error :This OID indicates that an error has been detected in the FIFO of the client transceiver FIFO_ERR_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmaccessioSdhAlarmEntry 3 } --- ********************************************************* --- TABLE for the pm1004dcpAlmj0Alarm articles --- ********************************************************* pm1004dcpAlmj0AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmj0AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmj0Alarm Article " ::= { pm1004dcpMonClientTraceIdentifier 2112 } pm1004dcpAlmj0AlarmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmj0AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmj0Alarm table " INDEX { pm1004dcpAlmj0AlarmIndex } ::= { pm1004dcpAlmj0AlarmTable 1 } Pm1004dcpAlmj0AlarmEntry ::= SEQUENCE { pm1004dcpAlmj0AlarmIndex INTEGER, pm1004dcpAlmCrc7ErrorPortn EkiOnOff, pm1004dcpAlmJ0TiiAlarmPortn EkiOnOff, pm1004dcpAlmJ0TimAlarmPortn EkiOnOff } pm1004dcpAlmj0AlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmj0Alarm table " ::= { pm1004dcpAlmj0AlarmEntry 1 } pm1004dcpAlmCrc7ErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Error On Trace Identifier :This OID indicates that a CRC error has been detected in the stable Trace Identifier on the client input stream CRC7_ERROR_1 other (1) other (1) (2) " ::= { pm1004dcpAlmj0AlarmEntry 4 } pm1004dcpAlmJ0TiiAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Trace Identifier Unstable :This OID indicates the Trace Identifier is unstable on the client input stream J0_TII_ALARM_1 other (1) other (1) (2) " ::= { pm1004dcpAlmj0AlarmEntry 3 } pm1004dcpAlmJ0TimAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Trace Identifier Mismatch :This OID indicates a Trace Identifier Mismatch has been detected on the client input stream J0_TIM_ALARM_1 other (1) other (1) (2) " ::= { pm1004dcpAlmj0AlarmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmdfrmAlm articles --- ********************************************************* pm1004dcpAlmdfrmAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmdfrmAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmdfrmAlm Article " ::= { pm1004dcpAlmLineCrit 128 } pm1004dcpAlmdfrmAlmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmdfrmAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmdfrmAlm table " INDEX { pm1004dcpAlmdfrmAlmIndex } ::= { pm1004dcpAlmdfrmAlmTable 1 } Pm1004dcpAlmdfrmAlmEntry ::= SEQUENCE { pm1004dcpAlmdfrmAlmIndex INTEGER, pm1004dcpAlmDwLofPortn EkiOnOff, pm1004dcpAlmDwOofPortn EkiOnOff, pm1004dcpAlmDwRdiDetPortn EkiOnOff, pm1004dcpAlmDwAisDetPortn EkiOnOff } pm1004dcpAlmdfrmAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmdfrmAlm table " ::= { pm1004dcpAlmdfrmAlmEntry 1 } pm1004dcpAlmDwLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on G709 input signal This alarm indicates if there is a G,709 Loss of Frame is detected on the line input signal DW_LOF_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmdfrmAlmEntry 5 } pm1004dcpAlmDwOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on G709 input signal This alarm indicates if there is a G,709 Out of Frame is detected on the line input signal DW_OOF_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmdfrmAlmEntry 4 } pm1004dcpAlmDwRdiDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OTU2 SM-BDI Detected On Line Input :This OID indicates that an SM-BDI has been detected on G709 input signal This alarm indicates if there is a SM-BDI is detected on the line input signal DW_RDI_DET_1 remoteNodeTransmissionError (43) other (1) (2) " ::= { pm1004dcpAlmdfrmAlmEntry 3 } pm1004dcpAlmDwAisDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " ODU2 AIS Detected On Line Input :This OID indicates that an ODU2-AIS has been detected on G709 input signal This alarm indicates if there is a ODU2 AIS is detected on the line input signal DW_AIS_DET_1 receiveFailure (41) operationalViolation (8) (2) " ::= { pm1004dcpAlmdfrmAlmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmdfrmBer articles --- ********************************************************* pm1004dcpAlmdfrmBerTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmdfrmBerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmdfrmBer Article " ::= { pm1004dcpAlmLineUrg 129 } pm1004dcpAlmdfrmBerEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmdfrmBerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmdfrmBer table " INDEX { pm1004dcpAlmdfrmBerIndex } ::= { pm1004dcpAlmdfrmBerTable 1 } Pm1004dcpAlmdfrmBerEntry ::= SEQUENCE { pm1004dcpAlmdfrmBerIndex INTEGER, pm1004dcpAlmLineDegradePortn EkiOnOff, pm1004dcpAlmLineSignalFailPortn EkiOnOff, pm1004dcpAlmLineSignalDegradePortn EkiOnOff } pm1004dcpAlmdfrmBerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmdfrmBer table " ::= { pm1004dcpAlmdfrmBerEntry 1 } pm1004dcpAlmLineDegradePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertion) LINE_DEGRADE_1 degradedSignal (13) qualityOfServiceAlarm (3) (2) " ::= { pm1004dcpAlmdfrmBerEntry 6 } pm1004dcpAlmLineSignalFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host LINE_SIGNAL_FAIL_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004dcpAlmdfrmBerEntry 3 } pm1004dcpAlmLineSignalDegradePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host LINE_SIGNAL_DEGRADE_1 degradedSignal (13) qualityOfServiceAlarm (3) (2) " ::= { pm1004dcpAlmdfrmBerEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineSyncAlarms articles --- ********************************************************* pm1004dcpAlmlineSyncAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineSyncAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineSyncAlarms Article " ::= { pm1004dcpAlmLineCrit 133 } pm1004dcpAlmlineSyncAlarmsEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineSyncAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineSyncAlarms table " INDEX { pm1004dcpAlmlineSyncAlarmsIndex } ::= { pm1004dcpAlmlineSyncAlarmsTable 1 } Pm1004dcpAlmlineSyncAlarmsEntry ::= SEQUENCE { pm1004dcpAlmlineSyncAlarmsIndex INTEGER, pm1004dcpAlmDwLosPortn EkiOnOff, pm1004dcpAlmUpLockerrPortn EkiOnOff, pm1004dcpAlmDwLockerrPortn EkiOnOff } pm1004dcpAlmlineSyncAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineSyncAlarms table " ::= { pm1004dcpAlmlineSyncAlarmsEntry 1 } pm1004dcpAlmDwLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. This alarm indicates if an optical signal is detected on the line transceiver input DW_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm1004dcpAlmlineSyncAlarmsEntry 17 } pm1004dcpAlmUpLockerrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. UP_LOCKERR receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineSyncAlarmsEntry 14 } pm1004dcpAlmDwLockerrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. DW_LOCKERR receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineSyncAlarmsEntry 13 } --- ***************************************************** --- LEAF for the modInitFailLevel2 article --- ***************************************************** pm1004dcpAlmmodInitFailLevel2 OBJECT IDENTIFIER ::= { pm1004dcpAlmOtherUrg 194 } pm1004dcpAlmSwInitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions This alarm indicates if the SW module is correctly initialized SW_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel2 5 } pm1004dcpAlmResetHwInitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions This alarm indicates if the HW has been correctly initialized RESET_HW_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel2 4 } pm1004dcpAlmBootUndone OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Boot Undone :This OID indicates that the boot has not been correctly achieved This alarm indicates if the module has correctly boot BOOT_UNDONE softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel2 3 } pm1004dcpAlmNextColdBootForced OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold This alarm indicates that the next reset of the module will be forced to cold reset NEXT_COLD_BOOT_FORCED informationalStatus(1000) other (1) (2) " ::= { pm1004dcpAlmmodInitFailLevel2 2 } pm1004dcpAlmLedFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Led Fail :This OID indicates that Led register has not been correctly initalized This alarm indicates if the module LEDs are correctly initialized LED_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel2 1 } --- ***************************************************** --- LEAF for the modInitFailLevel3 article --- ***************************************************** pm1004dcpAlmmodInitFailLevel3 OBJECT IDENTIFIER ::= { pm1004dcpAlmOtherUrg 195 } pm1004dcpAlmClient4InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized This alarm indicates if the client port 4 is correctly initialized CLIENT4_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 12 } pm1004dcpAlmClient3InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized This alarm indicates if the client port 3 is correctly initialized CLIENT3_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 11 } pm1004dcpAlmClient2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized This alarm indicates if the client port 2 is correctly initialized CLIENT2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 10 } pm1004dcpAlmClient1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized This alarm indicates if the client port 1 is correctly initialized CLIENT1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 9 } pm1004dcpAlmLine2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized This alarm indicates if the line port 2 is correctly initialized LINE2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 8 } pm1004dcpAlmLine1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized This alarm indicates if the line port 1 is correctly initialized LINE1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 7 } pm1004dcpAlmXfp2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized This alarm indicates if the line transceiver 2 is correctly initialized XFP2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 6 } pm1004dcpAlmXfp1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized This alarm indicates if the line transceiver 1 is correctly initialized XFP1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 5 } pm1004dcpAlmInitModuleFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Init Module Fail :This OID indicates that the Module has not been correctly initialized This alarm indicates if the SW module is correctly initialized INIT_MODULE_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 3 } pm1004dcpAlmObmTypeReadFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OBM Type Read Fail :This OID indicates that OBM type has not been recognized This alarm indicates if the OBM board has been correctly identified OBM_TYPE_READ_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 2 } pm1004dcpAlmGwIdentFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW Ident Fail :This OID indicates that GW identification has not been read This alarm indicates if the GW has been correctly identified GW_IDENT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004dcpAlmmodInitFailLevel3 1 } --- ***************************************************** --- LEAF for the adddropTsClientRxProt article --- ***************************************************** pm1004dcpAlmadddropTsClientRxProt OBJECT IDENTIFIER ::= { pm1004dcpAlmOtherUrg 198 } pm1004dcpAlmAdddropClient4East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 4 East Rx Side Active :This OID indicates the Client #4 is active on East receiving side ADDDROP_CLIENT4_EAST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 12 } pm1004dcpAlmAdddropClient3East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 3 East Rx Side Active :This OID indicates the Client #3 is active on East receiving side ADDDROP_CLIENT3_EAST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 11 } pm1004dcpAlmAdddropClient2East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 2 East Rx Side Active :This OID indicates the Client #2 is active on East receiving side ADDDROP_CLIENT2_EAST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 10 } pm1004dcpAlmAdddropClient1East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 1 East Rx Side Active :This OID indicates the Client #1 is active on East receiving side ADDDROP_CLIENT1_EAST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 9 } pm1004dcpAlmAdddropClient4West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 4 West Rx Side Active :This OID indicates the Client #4 is active on West receiving side ADDDROP_CLIENT4_WEST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 4 } pm1004dcpAlmAdddropClient3West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 3 West Rx Side Active :This OID indicates the Client #3 is active on West receiving side ADDDROP_CLIENT3_WEST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 3 } pm1004dcpAlmAdddropClient2West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 2 West Rx Side Active :This OID indicates the Client #2 is active on West receiving side ADDDROP_CLIENT2_WEST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 2 } pm1004dcpAlmAdddropClient1West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client 1 West Rx Side Active :This OID indicates the Client #1 is active on West receiving side ADDDROP_CLIENT1_WEST other (1) other (1) (2) " ::= { pm1004dcpAlmadddropTsClientRxProt 1 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineXfp1Alarm articles --- ********************************************************* pm1004dcpAlmlineXfp1AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineXfp1AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineXfp1Alarm Article " ::= { pm1004dcpAlmLineUrg 208 } pm1004dcpAlmlineXfp1AlarmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineXfp1AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineXfp1Alarm table " INDEX { pm1004dcpAlmlineXfp1AlarmIndex } ::= { pm1004dcpAlmlineXfp1AlarmTable 1 } Pm1004dcpAlmlineXfp1AlarmEntry ::= SEQUENCE { pm1004dcpAlmlineXfp1AlarmIndex INTEGER, pm1004dcpAlmRxPowerHighAlarmPortn EkiOnOff, pm1004dcpAlmRxPowerLowAlarmPortn EkiOnOff, pm1004dcpAlmTempHighAlarmPortn EkiOnOff, pm1004dcpAlmTempLowAlarmPortn EkiOnOff, pm1004dcpAlmTxBiasHighAlarmPortn EkiOnOff, pm1004dcpAlmTxBiasLowAlarmPortn EkiOnOff, pm1004dcpAlmTxPowerHighAlarmPortn EkiOnOff, pm1004dcpAlmTxPowerLowAlarmPortn EkiOnOff } pm1004dcpAlmlineXfp1AlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineXfp1Alarm table " ::= { pm1004dcpAlmlineXfp1AlarmEntry 1 } pm1004dcpAlmRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM RX_POWER_HIGH_ALARM_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 17 } pm1004dcpAlmRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM RX_POWER_LOW_ALARM_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 16 } pm1004dcpAlmTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM TEMP_HIGH_ALARM_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 9 } pm1004dcpAlmTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM TEMP_LOW_ALARM_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 8 } pm1004dcpAlmTxBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM TX_BIAS_HIGH_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 5 } pm1004dcpAlmTxBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM TX_BIAS_LOW_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 4 } pm1004dcpAlmTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM TX_POWER_HIGH_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 3 } pm1004dcpAlmTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM TX_POWER_LOW_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineXfp1Warnings articles --- ********************************************************* pm1004dcpAlmlineXfp1WarningsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineXfp1WarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineXfp1Warnings Article " ::= { pm1004dcpAlmLineNurg 209 } pm1004dcpAlmlineXfp1WarningsEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineXfp1WarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineXfp1Warnings table " INDEX { pm1004dcpAlmlineXfp1WarningsIndex } ::= { pm1004dcpAlmlineXfp1WarningsTable 1 } Pm1004dcpAlmlineXfp1WarningsEntry ::= SEQUENCE { pm1004dcpAlmlineXfp1WarningsIndex INTEGER, pm1004dcpAlmRxPowerHighWarningPortn EkiOnOff, pm1004dcpAlmRxPowerLowWarningPortn EkiOnOff, pm1004dcpAlmTempHighWarningPortn EkiOnOff, pm1004dcpAlmTempLowWarningPortn EkiOnOff, pm1004dcpAlmTxBiasHighWarningPortn EkiOnOff, pm1004dcpAlmTxBiasLowWarningPortn EkiOnOff, pm1004dcpAlmTxPowerHighWarningPortn EkiOnOff, pm1004dcpAlmTxPowerLowWarningPortn EkiOnOff } pm1004dcpAlmlineXfp1WarningsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineXfp1Warnings table " ::= { pm1004dcpAlmlineXfp1WarningsEntry 1 } pm1004dcpAlmRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM RX_POWER_HIGH_WARNING_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 17 } pm1004dcpAlmRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM RX_POWER_LOW_WARNING_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 16 } pm1004dcpAlmTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM TEMP_HIGH_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 9 } pm1004dcpAlmTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM TEMP_LOW_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 8 } pm1004dcpAlmTxBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM TX_BIAS_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 5 } pm1004dcpAlmTxBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM TX_BIAS_LOW_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 4 } pm1004dcpAlmTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM TX_POWER_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 3 } pm1004dcpAlmTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM TX_POWER_LOW_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1WarningsEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineXfp1Alarms articles --- ********************************************************* pm1004dcpAlmlineXfp1AlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineXfp1AlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineXfp1Alarms Article " ::= { pm1004dcpAlmLineCrit 211 } pm1004dcpAlmlineXfp1AlarmsEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineXfp1AlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineXfp1Alarms table " INDEX { pm1004dcpAlmlineXfp1AlarmsIndex } ::= { pm1004dcpAlmlineXfp1AlarmsTable 1 } Pm1004dcpAlmlineXfp1AlarmsEntry ::= SEQUENCE { pm1004dcpAlmlineXfp1AlarmsIndex INTEGER, pm1004dcpAlmApdSupplyFaultPortn EkiOnOff, pm1004dcpAlmTecFaultPortn EkiOnOff, pm1004dcpAlmWavelengthUnlockedPortn EkiOnOff, pm1004dcpAlmTxNrPortn EkiOnOff, pm1004dcpAlmTxFaultPortn EkiOnOff, pm1004dcpAlmTxCdrNotLockedPortn EkiOnOff, pm1004dcpAlmRxNrPortn EkiOnOff, pm1004dcpAlmRxCdrNotLockedPortn EkiOnOff, pm1004dcpAlmModNrPortn EkiOnOff } pm1004dcpAlmlineXfp1AlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineXfp1Alarms table " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 1 } pm1004dcpAlmApdSupplyFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply This alarm indicates if the APD power supply is in fail condition APD_SUPPLY_FAULT_1 receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 17 } pm1004dcpAlmTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module This alarm indicates if the TEC of the line transceiver is in fail condition TEC_FAULT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 16 } pm1004dcpAlmWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance This alarm indicates if the wavelenght of the line transceiver is locked WAVELENGTH_UNLOCKED_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 15 } pm1004dcpAlmTxNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side This alarm indicates if the Tx part of the line transceiver is ready TX_NR_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 9 } pm1004dcpAlmTxFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste This alarm indicates if the laser of the line transceiver is in fail condition TX_FAULT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 8 } pm1004dcpAlmTxCdrNotLockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. This alarm indicates if the Tx CDR is locked in the line transceiver TX_CDR_NOT_LOCKED1_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 7 } pm1004dcpAlmRxNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. This alarm indicates if the Rx part of the line transceiver is ready RX_NR_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 6 } pm1004dcpAlmRxCdrNotLockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected This alarm indicates if the Rx CDR is locked in the line transceiver RX_CDR_NOT_LOCKED1_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 4 } pm1004dcpAlmModNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. This alarm indicates if the line transceiver is ready MOD_NR_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1AlarmsEntry 3 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineXfp1SupplyAlarm articles --- ********************************************************* pm1004dcpAlmlineXfp1SupplyAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineXfp1SupplyAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineXfp1SupplyAlarm Article " ::= { pm1004dcpAlmLineUrg 212 } pm1004dcpAlmlineXfp1SupplyAlarmEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineXfp1SupplyAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineXfp1SupplyAlarm table " INDEX { pm1004dcpAlmlineXfp1SupplyAlarmIndex } ::= { pm1004dcpAlmlineXfp1SupplyAlarmTable 1 } Pm1004dcpAlmlineXfp1SupplyAlarmEntry ::= SEQUENCE { pm1004dcpAlmlineXfp1SupplyAlarmIndex INTEGER, pm1004dcpAlmVcc5HighWarningPortn EkiOnOff, pm1004dcpAlmVcc5LowWarningPortn EkiOnOff, pm1004dcpAlmVcc3HighWarningPortn EkiOnOff, pm1004dcpAlmVcc3LowWarningPortn EkiOnOff, pm1004dcpAlmVcc2HighWarningPortn EkiOnOff, pm1004dcpAlmVcc2LowWarningPortn EkiOnOff, pm1004dcpAlmVee5HighWarningPortn EkiOnOff, pm1004dcpAlmVee5LowWarningPortn EkiOnOff, pm1004dcpAlmVcc5HighAlarmPortn EkiOnOff, pm1004dcpAlmVcc5LowAlarmPortn EkiOnOff, pm1004dcpAlmVcc3HighAlarmPortn EkiOnOff, pm1004dcpAlmVcc3LowAlarmPortn EkiOnOff, pm1004dcpAlmVcc2HighAlarmPortn EkiOnOff, pm1004dcpAlmVcc2LowAlarmPortn EkiOnOff, pm1004dcpAlmVee5HighAlarmPortn EkiOnOff, pm1004dcpAlmVee5LowAlarmPortn EkiOnOff } pm1004dcpAlmlineXfp1SupplyAlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineXfp1SupplyAlarm table " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 1 } pm1004dcpAlmVcc5HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM VCC5_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 17 } pm1004dcpAlmVcc5LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM VCC5_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 16 } pm1004dcpAlmVcc3HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM VCC3_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 15 } pm1004dcpAlmVcc3LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM VCC3_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 14 } pm1004dcpAlmVcc2HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM VCC2_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 13 } pm1004dcpAlmVcc2LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM VCC2_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 12 } pm1004dcpAlmVee5HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM VEE5_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 11 } pm1004dcpAlmVee5LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM VEE5_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 10 } pm1004dcpAlmVcc5HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM VCC5_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 9 } pm1004dcpAlmVcc5LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM VCC5_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 8 } pm1004dcpAlmVcc3HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM VCC3_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 7 } pm1004dcpAlmVcc3LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM VCC3_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 6 } pm1004dcpAlmVcc2HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM VCC2_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 5 } pm1004dcpAlmVcc2LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM VCC2_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 4 } pm1004dcpAlmVee5HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM VEE5_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 3 } pm1004dcpAlmVee5LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM VEE5_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineXfp1SupplyAlarmEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineOtx1TlhAlarms articles --- ********************************************************* pm1004dcpAlmlineOtx1TlhAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineOtx1TlhAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineOtx1TlhAlarms Article " ::= { pm1004dcpAlmLineUrg 224 } pm1004dcpAlmlineOtx1TlhAlarmsEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineOtx1TlhAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineOtx1TlhAlarms table " INDEX { pm1004dcpAlmlineOtx1TlhAlarmsIndex } ::= { pm1004dcpAlmlineOtx1TlhAlarmsTable 1 } Pm1004dcpAlmlineOtx1TlhAlarmsEntry ::= SEQUENCE { pm1004dcpAlmlineOtx1TlhAlarmsIndex INTEGER, pm1004dcpAlmLineLaserTempHighAlaPortn EkiOnOff, pm1004dcpAlmLineFreqDevHighAlaPortn EkiOnOff, pm1004dcpAlmLineAgingHighAlaPortn EkiOnOff, pm1004dcpAlmLineModulatorAgingHighAlaPortn EkiOnOff } pm1004dcpAlmlineOtx1TlhAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineOtx1TlhAlarms table " ::= { pm1004dcpAlmlineOtx1TlhAlarmsEntry 1 } pm1004dcpAlmLineLaserTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM LINE_LASER_TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhAlarmsEntry 15 } pm1004dcpAlmLineFreqDevHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM LINE_FREQ_DEV_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhAlarmsEntry 13 } pm1004dcpAlmLineAgingHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM LINE_AGING_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhAlarmsEntry 7 } pm1004dcpAlmLineModulatorAgingHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM LINE_MODULATOR_AGING_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhAlarmsEntry 6 } --- ********************************************************* --- TABLE for the pm1004dcpAlmlineOtx1TlhWarnings articles --- ********************************************************* pm1004dcpAlmlineOtx1TlhWarningsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpAlmlineOtx1TlhWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpAlmlineOtx1TlhWarnings Article " ::= { pm1004dcpAlmLineNurg 225 } pm1004dcpAlmlineOtx1TlhWarningsEntry OBJECT-TYPE SYNTAX Pm1004dcpAlmlineOtx1TlhWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpAlmlineOtx1TlhWarnings table " INDEX { pm1004dcpAlmlineOtx1TlhWarningsIndex } ::= { pm1004dcpAlmlineOtx1TlhWarningsTable 1 } Pm1004dcpAlmlineOtx1TlhWarningsEntry ::= SEQUENCE { pm1004dcpAlmlineOtx1TlhWarningsIndex INTEGER, pm1004dcpAlmLineLaserTempHighWarningPortn EkiOnOff, pm1004dcpAlmLineFreqDevHighWarningPortn EkiOnOff, pm1004dcpAlmLineAgingHighWarningPortn EkiOnOff, pm1004dcpAlmLineModulatorAgingHighWarningPortn EkiOnOff } pm1004dcpAlmlineOtx1TlhWarningsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpAlmlineOtx1TlhWarnings table " ::= { pm1004dcpAlmlineOtx1TlhWarningsEntry 1 } pm1004dcpAlmLineLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM LINE_LASER_TEMP_HIGH_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhWarningsEntry 15 } pm1004dcpAlmLineFreqDevHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM LINE_FREQ_DEV_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhWarningsEntry 13 } pm1004dcpAlmLineAgingHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM LINE_AGING_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhWarningsEntry 7 } pm1004dcpAlmLineModulatorAgingHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM LINE_MODULATOR_AGING_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004dcpAlmlineOtx1TlhWarningsEntry 6 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the confMgnt1 article --- ***************************************************** pm1004dcpCtrlconfMgnt1 OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 1 } pm1004dcpCtrlConf2Clear1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. This control restores the default configuration of the module " ::= { pm1004dcpCtrlconfMgnt1 14 } pm1004dcpCtrlConf2Flash1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. This control saves the customer configuration on the module " ::= { pm1004dcpCtrlconfMgnt1 10 } pm1004dcpCtrlConf2Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. " ::= { pm1004dcpCtrlconfMgnt1 2 } pm1004dcpCtrlConf1Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. " ::= { pm1004dcpCtrlconfMgnt1 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pm1004dcpCtrlsynth4 OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 4 } pm1004dcpCtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pm1004dcpCtrlsynth4 2 } pm1004dcpCtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pm1004dcpCtrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pm1004dcpCtrlswMgnt OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 5 } pm1004dcpCtrlLoadSwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. This controls selects the second SW bank as the active bank for the next module reset " ::= { pm1004dcpCtrlswMgnt 6 } pm1004dcpCtrlLoadSwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. This controls selects the first SW bank as the active bank for the next module reset " ::= { pm1004dcpCtrlswMgnt 5 } pm1004dcpCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. This control initiates a warm reset of the module. " ::= { pm1004dcpCtrlswMgnt 3 } pm1004dcpCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pm1004dcpCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the gwMgnt article --- ***************************************************** pm1004dcpCtrlgwMgnt OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 6 } pm1004dcpCtrlLoadGwBank4 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm1004dcpCtrlgwMgnt 8 } pm1004dcpCtrlLoadGwBank3 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the third GW bank as the active bank " ::= { pm1004dcpCtrlgwMgnt 7 } pm1004dcpCtrlLoadGwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm1004dcpCtrlgwMgnt 6 } pm1004dcpCtrlLoadGwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the first GW bank as the active bank " ::= { pm1004dcpCtrlgwMgnt 5 } pm1004dcpCtrlCurrentGwReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. " ::= { pm1004dcpCtrlgwMgnt 1 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlaccessLoop articles --- ********************************************************* pm1004dcpCtrlaccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlaccessLoop Article " ::= { pm1004dcpCtrlClient 16 } pm1004dcpCtrlaccessLoopEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlaccessLoop table " INDEX { pm1004dcpCtrlaccessLoopIndex } ::= { pm1004dcpCtrlaccessLoopTable 1 } Pm1004dcpCtrlaccessLoopEntry ::= SEQUENCE { pm1004dcpCtrlaccessLoopIndex INTEGER, pm1004dcpCtrlaccessLoopPortn EkiState } pm1004dcpCtrlaccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlaccessLoop table " ::= { pm1004dcpCtrlaccessLoopEntry 1 } pm1004dcpCtrlaccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver This maintenance parameter operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver " ::= { pm1004dcpCtrlaccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlportOosMode articles --- ********************************************************* pm1004dcpCtrlportOosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlportOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlportOosMode Article " ::= { pm1004dcpCtrlClient 18 } pm1004dcpCtrlportOosModeEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlportOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlportOosMode table " INDEX { pm1004dcpCtrlportOosModeIndex } ::= { pm1004dcpCtrlportOosModeTable 1 } Pm1004dcpCtrlportOosModeEntry ::= SEQUENCE { pm1004dcpCtrlportOosModeIndex INTEGER, pm1004dcpCtrlportOosModePortn EkiState } pm1004dcpCtrlportOosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlportOosMode table " ::= { pm1004dcpCtrlportOosModeEntry 1 } pm1004dcpCtrlportOosModePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Port Out Of Service :This OID sets the client port Out Of Service This controls defines the service state of the client port " ::= { pm1004dcpCtrlportOosModeEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlsfpOnCtrl articles --- ********************************************************* pm1004dcpCtrlsfpOnCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlsfpOnCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlsfpOnCtrl Article " ::= { pm1004dcpCtrlClient 19 } pm1004dcpCtrlsfpOnCtrlEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlsfpOnCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlsfpOnCtrl table " INDEX { pm1004dcpCtrlsfpOnCtrlIndex } ::= { pm1004dcpCtrlsfpOnCtrlTable 1 } Pm1004dcpCtrlsfpOnCtrlEntry ::= SEQUENCE { pm1004dcpCtrlsfpOnCtrlIndex INTEGER, pm1004dcpCtrlsfpOnCtrlPortn EkiState } pm1004dcpCtrlsfpOnCtrlIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlsfpOnCtrl table " ::= { pm1004dcpCtrlsfpOnCtrlEntry 1 } pm1004dcpCtrlsfpOnCtrlPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client SFP Optical Laser ON :This OID switches on the SFP. " ::= { pm1004dcpCtrlsfpOnCtrlEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlsfpOffCtrl articles --- ********************************************************* pm1004dcpCtrlsfpOffCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlsfpOffCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlsfpOffCtrl Article " ::= { pm1004dcpCtrlClient 20 } pm1004dcpCtrlsfpOffCtrlEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlsfpOffCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlsfpOffCtrl table " INDEX { pm1004dcpCtrlsfpOffCtrlIndex } ::= { pm1004dcpCtrlsfpOffCtrlTable 1 } Pm1004dcpCtrlsfpOffCtrlEntry ::= SEQUENCE { pm1004dcpCtrlsfpOffCtrlIndex INTEGER, pm1004dcpCtrlsfpOffCtrlPortn EkiState } pm1004dcpCtrlsfpOffCtrlIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlsfpOffCtrl table " ::= { pm1004dcpCtrlsfpOffCtrlEntry 1 } pm1004dcpCtrlsfpOffCtrlPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client SFP Laser Shutdown :This OID switches off the SFP. This control defines the laser state of the client transceiver " ::= { pm1004dcpCtrlsfpOffCtrlEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlcsfUpIns articles --- ********************************************************* pm1004dcpCtrlcsfUpInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlcsfUpIns Article " ::= { pm1004dcpCtrlClient 21 } pm1004dcpCtrlcsfUpInsEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlcsfUpIns table " INDEX { pm1004dcpCtrlcsfUpInsIndex } ::= { pm1004dcpCtrlcsfUpInsTable 1 } Pm1004dcpCtrlcsfUpInsEntry ::= SEQUENCE { pm1004dcpCtrlcsfUpInsIndex INTEGER, pm1004dcpCtrlcsfUpInsPortn EkiState } pm1004dcpCtrlcsfUpInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlcsfUpIns table " ::= { pm1004dcpCtrlcsfUpInsEntry 1 } pm1004dcpCtrlcsfUpInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. This control inserts a Client Signal Fail for the client port " ::= { pm1004dcpCtrlcsfUpInsEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlcaisDwIns articles --- ********************************************************* pm1004dcpCtrlcaisDwInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlcaisDwIns Article " ::= { pm1004dcpCtrlClient 22 } pm1004dcpCtrlcaisDwInsEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlcaisDwIns table " INDEX { pm1004dcpCtrlcaisDwInsIndex } ::= { pm1004dcpCtrlcaisDwInsTable 1 } Pm1004dcpCtrlcaisDwInsEntry ::= SEQUENCE { pm1004dcpCtrlcaisDwInsIndex INTEGER, pm1004dcpCtrlcaisDwInsPortn EkiState } pm1004dcpCtrlcaisDwInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlcaisDwIns table " ::= { pm1004dcpCtrlcaisDwInsEntry 1 } pm1004dcpCtrlcaisDwInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. This control inserts a Client AIS for the client port " ::= { pm1004dcpCtrlcaisDwInsEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlclientAccessTermLoop articles --- ********************************************************* pm1004dcpCtrlclientAccessTermLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlclientAccessTermLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlclientAccessTermLoop Article " ::= { pm1004dcpCtrlClient 26 } pm1004dcpCtrlclientAccessTermLoopEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlclientAccessTermLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlclientAccessTermLoop table " INDEX { pm1004dcpCtrlclientAccessTermLoopIndex } ::= { pm1004dcpCtrlclientAccessTermLoopTable 1 } Pm1004dcpCtrlclientAccessTermLoopEntry ::= SEQUENCE { pm1004dcpCtrlclientAccessTermLoopIndex INTEGER, pm1004dcpCtrlclientAccessTermLoopPortn EkiState } pm1004dcpCtrlclientAccessTermLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlclientAccessTermLoop table " ::= { pm1004dcpCtrlclientAccessTermLoopEntry 1 } pm1004dcpCtrlclientAccessTermLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver This maintenance parameter operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver " ::= { pm1004dcpCtrlclientAccessTermLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlresetCount15Port articles --- ********************************************************* pm1004dcpCtrlresetCount15PortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlresetCount15PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlresetCount15Port Article " ::= { pm1004dcpCtrlClient 35 } pm1004dcpCtrlresetCount15PortEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlresetCount15PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlresetCount15Port table " INDEX { pm1004dcpCtrlresetCount15PortIndex } ::= { pm1004dcpCtrlresetCount15PortTable 1 } Pm1004dcpCtrlresetCount15PortEntry ::= SEQUENCE { pm1004dcpCtrlresetCount15PortIndex INTEGER, pm1004dcpCtrlclientResetAllPerfCount15Portn EkiState } pm1004dcpCtrlresetCount15PortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlresetCount15Port table " ::= { pm1004dcpCtrlresetCount15PortEntry 1 } pm1004dcpCtrlclientResetAllPerfCount15Portn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port " ::= { pm1004dcpCtrlresetCount15PortEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlresetCount24Port articles --- ********************************************************* pm1004dcpCtrlresetCount24PortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlresetCount24PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlresetCount24Port Article " ::= { pm1004dcpCtrlClient 36 } pm1004dcpCtrlresetCount24PortEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlresetCount24PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlresetCount24Port table " INDEX { pm1004dcpCtrlresetCount24PortIndex } ::= { pm1004dcpCtrlresetCount24PortTable 1 } Pm1004dcpCtrlresetCount24PortEntry ::= SEQUENCE { pm1004dcpCtrlresetCount24PortIndex INTEGER, pm1004dcpCtrlclientResetAllPerfCount24Portn EkiState } pm1004dcpCtrlresetCount24PortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlresetCount24Port table " ::= { pm1004dcpCtrlresetCount24PortEntry 1 } pm1004dcpCtrlclientResetAllPerfCount24Portn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port " ::= { pm1004dcpCtrlresetCount24PortEntry 2 } --- ***************************************************** --- LEAF for the commAccessLoop article --- ***************************************************** pm1004dcpCtrlcommAccessLoop OBJECT IDENTIFIER ::= { pm1004dcpCtrlLine 64 } pm1004dcpCtrlCommAccessloop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS deprecated DESCRIPTION " PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. " ::= { pm1004dcpCtrlcommAccessLoop 1 } --- ***************************************************** --- LEAF for the lineLoop article --- ***************************************************** pm1004dcpCtrllineLoop OBJECT IDENTIFIER ::= { pm1004dcpCtrlLine 66 } pm1004dcpCtrlLineLoop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS deprecated DESCRIPTION " PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Upstream part of the module is timed on the 10 Gb/s recovered clock in that case. " ::= { pm1004dcpCtrllineLoop 1 } --- ***************************************************** --- LEAF for the msAis article --- ***************************************************** pm1004dcpCtrlmsAis OBJECT IDENTIFIER ::= { pm1004dcpCtrlLine 67 } pm1004dcpCtrlMsAis OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. " ::= { pm1004dcpCtrlmsAis 1 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlfecDisable articles --- ********************************************************* pm1004dcpCtrlfecDisableTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlfecDisable Article " ::= { pm1004dcpCtrlLine 69 } pm1004dcpCtrlfecDisableEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlfecDisable table " INDEX { pm1004dcpCtrlfecDisableIndex } ::= { pm1004dcpCtrlfecDisableTable 1 } Pm1004dcpCtrlfecDisableEntry ::= SEQUENCE { pm1004dcpCtrlfecDisableIndex INTEGER, pm1004dcpCtrlfecDisablePortn EkiState } pm1004dcpCtrlfecDisableIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlfecDisable table " ::= { pm1004dcpCtrlfecDisableEntry 1 } pm1004dcpCtrlfecDisablePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input This control enables/disables the Forward Error Correction on the line interface " ::= { pm1004dcpCtrlfecDisableEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllineOosMode articles --- ********************************************************* pm1004dcpCtrllineOosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllineOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllineOosMode Article " ::= { pm1004dcpCtrlLine 74 } pm1004dcpCtrllineOosModeEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllineOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllineOosMode table " INDEX { pm1004dcpCtrllineOosModeIndex } ::= { pm1004dcpCtrllineOosModeTable 1 } Pm1004dcpCtrllineOosModeEntry ::= SEQUENCE { pm1004dcpCtrllineOosModeIndex INTEGER, pm1004dcpCtrllineOosModePortn EkiState } pm1004dcpCtrllineOosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllineOosMode table " ::= { pm1004dcpCtrllineOosModeEntry 1 } pm1004dcpCtrllineOosModePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Port Out Of Service :This OID sets the line port Out Of Service This control defines the service state of the line port " ::= { pm1004dcpCtrllineOosModeEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllineResetCount15Line articles --- ********************************************************* pm1004dcpCtrllineResetCount15LineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllineResetCount15LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllineResetCount15Line Article " ::= { pm1004dcpCtrlLine 86 } pm1004dcpCtrllineResetCount15LineEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllineResetCount15LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllineResetCount15Line table " INDEX { pm1004dcpCtrllineResetCount15LineIndex } ::= { pm1004dcpCtrllineResetCount15LineTable 1 } Pm1004dcpCtrllineResetCount15LineEntry ::= SEQUENCE { pm1004dcpCtrllineResetCount15LineIndex INTEGER, pm1004dcpCtrlresetAllPerfCount15Portn EkiState } pm1004dcpCtrllineResetCount15LineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllineResetCount15Line table " ::= { pm1004dcpCtrllineResetCount15LineEntry 1 } pm1004dcpCtrlresetAllPerfCount15Portn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port " ::= { pm1004dcpCtrllineResetCount15LineEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllineResetCount24Line articles --- ********************************************************* pm1004dcpCtrllineResetCount24LineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllineResetCount24LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllineResetCount24Line Article " ::= { pm1004dcpCtrlLine 87 } pm1004dcpCtrllineResetCount24LineEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllineResetCount24LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllineResetCount24Line table " INDEX { pm1004dcpCtrllineResetCount24LineIndex } ::= { pm1004dcpCtrllineResetCount24LineTable 1 } Pm1004dcpCtrllineResetCount24LineEntry ::= SEQUENCE { pm1004dcpCtrllineResetCount24LineIndex INTEGER, pm1004dcpCtrlresetAllPerfCount24Portn EkiState } pm1004dcpCtrllineResetCount24LineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllineResetCount24Line table " ::= { pm1004dcpCtrllineResetCount24LineEntry 1 } pm1004dcpCtrlresetAllPerfCount24Portn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port " ::= { pm1004dcpCtrllineResetCount24LineEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrladddropTsClientARxProtect articles --- ********************************************************* pm1004dcpCtrladddropTsClientARxProtectTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrladddropTsClientARxProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrladddropTsClientARxProtect Article " ::= { pm1004dcpCtrlClient 128 } pm1004dcpCtrladddropTsClientARxProtectEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrladddropTsClientARxProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrladddropTsClientARxProtect table " INDEX { pm1004dcpCtrladddropTsClientARxProtectIndex } ::= { pm1004dcpCtrladddropTsClientARxProtectTable 1 } Pm1004dcpCtrladddropTsClientARxProtectEntry ::= SEQUENCE { pm1004dcpCtrladddropTsClientARxProtectIndex INTEGER, pm1004dcpCtrladddropTsClientARxProtectPortn Pm1004dcpProtectionTimeSlot } pm1004dcpCtrladddropTsClientARxProtectIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrladddropTsClientARxProtect table " ::= { pm1004dcpCtrladddropTsClientARxProtectEntry 1 } pm1004dcpCtrladddropTsClientARxProtectPortn OBJECT-TYPE SYNTAX Pm1004dcpProtectionTimeSlot MAX-ACCESS read-write STATUS current DESCRIPTION " Client A Switch Mode :This bit selects the manual (1) or automatic (0) switch method This control defines the protection switch mode on the client interface " ::= { pm1004dcpCtrladddropTsClientARxProtectEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrladddropTsPairMode articles --- ********************************************************* pm1004dcpCtrladddropTsPairModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrladddropTsPairModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrladddropTsPairMode Article " ::= { pm1004dcpCtrlClient 136 } pm1004dcpCtrladddropTsPairModeEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrladddropTsPairModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrladddropTsPairMode table " INDEX { pm1004dcpCtrladddropTsPairModeIndex } ::= { pm1004dcpCtrladddropTsPairModeTable 1 } Pm1004dcpCtrladddropTsPairModeEntry ::= SEQUENCE { pm1004dcpCtrladddropTsPairModeIndex INTEGER, pm1004dcpCtrladddropTsPairModePortn Pm1004dcpModeTimeSlot } pm1004dcpCtrladddropTsPairModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrladddropTsPairMode table " ::= { pm1004dcpCtrladddropTsPairModeEntry 1 } pm1004dcpCtrladddropTsPairModePortn OBJECT-TYPE SYNTAX Pm1004dcpModeTimeSlot MAX-ACCESS read-write STATUS current DESCRIPTION " TS Group Mode :This OID selects the mode on the group of clients This control defines the mode (Add/Drop or Split&Select) of two consecutive Client (1/2 , 3/4 , 5/6 , 7/8) " ::= { pm1004dcpCtrladddropTsPairModeEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pm1004dcpCtrlledTest OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 192 } pm1004dcpCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pm1004dcpCtrlledTest 3 } pm1004dcpCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pm1004dcpCtrlledTest 2 } pm1004dcpCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pm1004dcpCtrlledTest 1 } --- ***************************************************** --- LEAF for the moduleOosMode article --- ***************************************************** pm1004dcpCtrlmoduleOosMode OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 193 } pm1004dcpCtrlModuleOosMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Out Of Service :This OID sets the PM Out Of Service This control defines the service state of the complete module " ::= { pm1004dcpCtrlmoduleOosMode 1 } --- ***************************************************** --- LEAF for the moduleDccMgnt article --- ***************************************************** pm1004dcpCtrlmoduleDccMgnt OBJECT-TYPE SYNTAX Pm1004dcpDccMode MAX-ACCESS read-write STATUS current DESCRIPTION " DCC Mode :This OID defines the DCC mode of the PM (No DCC, Master, Slave Line 1&2, Terminal Line 1, Terminal Line 2, Terminal Line 1&2) This control defines the DCC mode of the PM (No DCC, Master, Slave Line 1&2, Terminal Line 1, Terminal Line 2 or Terminal Line 1&2) " ::= { pm1004dcpCtrlOther 196 } --- ***************************************************** --- LEAF for the maintenanceMode article --- ***************************************************** pm1004dcpCtrlmaintenanceMode OBJECT IDENTIFIER ::= { pm1004dcpCtrlOther 197 } pm1004dcpCtrlMaintenanceMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Maintenance Mode :This OID enables the maintenance mode on the PM. This control enables the maintenance mode on the PM. " ::= { pm1004dcpCtrlmaintenanceMode 1 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlxfpOnoff articles --- ********************************************************* pm1004dcpCtrlxfpOnoffTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlxfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlxfpOnoff Article " ::= { pm1004dcpCtrlLine 208 } pm1004dcpCtrlxfpOnoffEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlxfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlxfpOnoff table " INDEX { pm1004dcpCtrlxfpOnoffIndex } ::= { pm1004dcpCtrlxfpOnoffTable 1 } Pm1004dcpCtrlxfpOnoffEntry ::= SEQUENCE { pm1004dcpCtrlxfpOnoffIndex INTEGER, pm1004dcpCtrlxfpOnoffPortn EkiState } pm1004dcpCtrlxfpOnoffIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlxfpOnoff table " ::= { pm1004dcpCtrlxfpOnoffEntry 1 } pm1004dcpCtrlxfpOnoffPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Optical Laser Shutdown :This OID switches off the XFP or the OTX This control defines the laser state of the line transceiver " ::= { pm1004dcpCtrlxfpOnoffEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlxfpLineLoop articles --- ********************************************************* pm1004dcpCtrlxfpLineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlxfpLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlxfpLineLoop Article " ::= { pm1004dcpCtrlLine 209 } pm1004dcpCtrlxfpLineLoopEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlxfpLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlxfpLineLoop table " INDEX { pm1004dcpCtrlxfpLineLoopIndex } ::= { pm1004dcpCtrlxfpLineLoopTable 1 } Pm1004dcpCtrlxfpLineLoopEntry ::= SEQUENCE { pm1004dcpCtrlxfpLineLoopIndex INTEGER, pm1004dcpCtrlxfpLineLoopPortn EkiState } pm1004dcpCtrlxfpLineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlxfpLineLoop table " ::= { pm1004dcpCtrlxfpLineLoopEntry 1 } pm1004dcpCtrlxfpLineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted This maintenance parameter operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted " ::= { pm1004dcpCtrlxfpLineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrlxfpXfiLoop articles --- ********************************************************* pm1004dcpCtrlxfpXfiLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrlxfpXfiLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrlxfpXfiLoop Article " ::= { pm1004dcpCtrlLine 210 } pm1004dcpCtrlxfpXfiLoopEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrlxfpXfiLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrlxfpXfiLoop table " INDEX { pm1004dcpCtrlxfpXfiLoopIndex } ::= { pm1004dcpCtrlxfpXfiLoopTable 1 } Pm1004dcpCtrlxfpXfiLoopEntry ::= SEQUENCE { pm1004dcpCtrlxfpXfiLoopIndex INTEGER, pm1004dcpCtrlxfpXfiLoopPortn EkiState } pm1004dcpCtrlxfpXfiLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrlxfpXfiLoop table " ::= { pm1004dcpCtrlxfpXfiLoopEntry 1 } pm1004dcpCtrlxfpXfiLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers This maintenance parameter operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers. " ::= { pm1004dcpCtrlxfpXfiLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllineTunableChannel articles --- ********************************************************* pm1004dcpCtrllineTunableChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllineTunableChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllineTunableChannel Article " ::= { pm1004dcpCtrlLine 212 } pm1004dcpCtrllineTunableChannelEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllineTunableChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllineTunableChannel table " INDEX { pm1004dcpCtrllineTunableChannelIndex } ::= { pm1004dcpCtrllineTunableChannelTable 1 } Pm1004dcpCtrllineTunableChannelEntry ::= SEQUENCE { pm1004dcpCtrllineTunableChannelIndex INTEGER, pm1004dcpCtrllineTunableChannelPortn Pm1004dcpOtxChannel } pm1004dcpCtrllineTunableChannelIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllineTunableChannel table " ::= { pm1004dcpCtrllineTunableChannelEntry 1 } pm1004dcpCtrllineTunableChannelPortn OBJECT-TYPE SYNTAX Pm1004dcpOtxChannel MAX-ACCESS read-write STATUS current DESCRIPTION " ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser This control defines the ITU channel of the Line OTX TLH Laser " ::= { pm1004dcpCtrllineTunableChannelEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllinePhotodiodeMode articles --- ********************************************************* pm1004dcpCtrllinePhotodiodeModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllinePhotodiodeModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllinePhotodiodeMode Article " ::= { pm1004dcpCtrlLine 213 } pm1004dcpCtrllinePhotodiodeModeEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllinePhotodiodeModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllinePhotodiodeMode table " INDEX { pm1004dcpCtrllinePhotodiodeModeIndex } ::= { pm1004dcpCtrllinePhotodiodeModeTable 1 } Pm1004dcpCtrllinePhotodiodeModeEntry ::= SEQUENCE { pm1004dcpCtrllinePhotodiodeModeIndex INTEGER, pm1004dcpCtrllinePhotodiodeModePortn Pm1004dcpOtxMode } pm1004dcpCtrllinePhotodiodeModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllinePhotodiodeMode table " ::= { pm1004dcpCtrllinePhotodiodeModeEntry 1 } pm1004dcpCtrllinePhotodiodeModePortn OBJECT-TYPE SYNTAX Pm1004dcpOtxMode MAX-ACCESS read-write STATUS current DESCRIPTION " OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH This control defines the receiver sensibility mode of the Line OTX TLH Laser (OTX60, OTX80 or Custom) " ::= { pm1004dcpCtrllinePhotodiodeModeEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllinePhotodiodeValue articles --- ********************************************************* pm1004dcpCtrllinePhotodiodeValueTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllinePhotodiodeValueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllinePhotodiodeValue Article " ::= { pm1004dcpCtrlLine 214 } pm1004dcpCtrllinePhotodiodeValueEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllinePhotodiodeValueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllinePhotodiodeValue table " INDEX { pm1004dcpCtrllinePhotodiodeValueIndex } ::= { pm1004dcpCtrllinePhotodiodeValueTable 1 } Pm1004dcpCtrllinePhotodiodeValueEntry ::= SEQUENCE { pm1004dcpCtrllinePhotodiodeValueIndex INTEGER, pm1004dcpCtrllinePhotodiodeValuePortn Pm1004dcpAdjustValue } pm1004dcpCtrllinePhotodiodeValueIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllinePhotodiodeValue table " ::= { pm1004dcpCtrllinePhotodiodeValueEntry 1 } pm1004dcpCtrllinePhotodiodeValuePortn OBJECT-TYPE SYNTAX Pm1004dcpAdjustValue MAX-ACCESS read-write STATUS current DESCRIPTION " OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) This control defines the receiver sensibility value (only in Custom mode) of the Line OTX TLH Laser " ::= { pm1004dcpCtrllinePhotodiodeValueEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpCtrllinePowerLaser articles --- ********************************************************* pm1004dcpCtrllinePowerLaserTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCtrllinePowerLaserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCtrllinePowerLaser Article " ::= { pm1004dcpCtrlLine 215 } pm1004dcpCtrllinePowerLaserEntry OBJECT-TYPE SYNTAX Pm1004dcpCtrllinePowerLaserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCtrllinePowerLaser table " INDEX { pm1004dcpCtrllinePowerLaserIndex } ::= { pm1004dcpCtrllinePowerLaserTable 1 } Pm1004dcpCtrllinePowerLaserEntry ::= SEQUENCE { pm1004dcpCtrllinePowerLaserIndex INTEGER, pm1004dcpCtrllinePowerLaserPortn INTEGER } pm1004dcpCtrllinePowerLaserIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCtrllinePowerLaser table " ::= { pm1004dcpCtrllinePowerLaserEntry 1 } pm1004dcpCtrllinePowerLaserPortn OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (Unit = dBm) This control defines the start-up output power of the Line OTX TLH " ::= { pm1004dcpCtrllinePowerLaserEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm1004dcpCntupRaRemCnt articles --- ********************************************************* pm1004dcpCntupRaRemCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntupRaRemCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntupRaRemCnt Article " ::= { pm1004dcpCntClient 16 } pm1004dcpCntupRaRemCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntupRaRemCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntupRaRemCnt table " INDEX { pm1004dcpCntupRaRemCntIndex } ::= { pm1004dcpCntupRaRemCntTable 1 } Pm1004dcpCntupRaRemCntEntry ::= SEQUENCE { pm1004dcpCntupRaRemCntIndex INTEGER, pm1004dcpCntupRaRemCntValuePortn Counter32, pm1004dcpCntupRaRemCntErrorPortn EkiOnOff, pm1004dcpCntupRaRemCntOverloadPortn EkiOnOff } pm1004dcpCntupRaRemCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntupRaRemCnt table " ::= { pm1004dcpCntupRaRemCntEntry 1 } pm1004dcpCntupRaRemCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream " ::= { pm1004dcpCntupRaRemCntEntry 2 } pm1004dcpCntupRaRemCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port " ::= { pm1004dcpCntupRaRemCntEntry 3 } pm1004dcpCntupRaRemCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port " ::= { pm1004dcpCntupRaRemCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntupRaInsCnt articles --- ********************************************************* pm1004dcpCntupRaInsCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntupRaInsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntupRaInsCnt Article " ::= { pm1004dcpCntClient 24 } pm1004dcpCntupRaInsCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntupRaInsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntupRaInsCnt table " INDEX { pm1004dcpCntupRaInsCntIndex } ::= { pm1004dcpCntupRaInsCntTable 1 } Pm1004dcpCntupRaInsCntEntry ::= SEQUENCE { pm1004dcpCntupRaInsCntIndex INTEGER, pm1004dcpCntupRaInsCntValuePortn Counter32, pm1004dcpCntupRaInsCntErrorPortn EkiOnOff, pm1004dcpCntupRaInsCntOverloadPortn EkiOnOff } pm1004dcpCntupRaInsCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntupRaInsCnt table " ::= { pm1004dcpCntupRaInsCntEntry 1 } pm1004dcpCntupRaInsCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream " ::= { pm1004dcpCntupRaInsCntEntry 2 } pm1004dcpCntupRaInsCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port " ::= { pm1004dcpCntupRaInsCntEntry 3 } pm1004dcpCntupRaInsCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port " ::= { pm1004dcpCntupRaInsCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntupRdErrCnt articles --- ********************************************************* pm1004dcpCntupRdErrCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntupRdErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntupRdErrCnt Article " ::= { pm1004dcpCntClient 32 } pm1004dcpCntupRdErrCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntupRdErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntupRdErrCnt table " INDEX { pm1004dcpCntupRdErrCntIndex } ::= { pm1004dcpCntupRdErrCntTable 1 } Pm1004dcpCntupRdErrCntEntry ::= SEQUENCE { pm1004dcpCntupRdErrCntIndex INTEGER, pm1004dcpCntupRdErrCntValuePortn Counter32, pm1004dcpCntupRdErrCntErrorPortn EkiOnOff, pm1004dcpCntupRdErrCntOverloadPortn EkiOnOff } pm1004dcpCntupRdErrCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntupRdErrCnt table " ::= { pm1004dcpCntupRdErrCntEntry 1 } pm1004dcpCntupRdErrCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream This counter gives the number of B1 errors on the client input port " ::= { pm1004dcpCntupRdErrCntEntry 2 } pm1004dcpCntupRdErrCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the client error counter value is invalid on Port " ::= { pm1004dcpCntupRdErrCntEntry 3 } pm1004dcpCntupRdErrCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a client input error counter overload on Port " ::= { pm1004dcpCntupRdErrCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntupTimCnt articles --- ********************************************************* pm1004dcpCntupTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntupTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntupTimCnt Article " ::= { pm1004dcpCntClient 40 } pm1004dcpCntupTimCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntupTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntupTimCnt table " INDEX { pm1004dcpCntupTimCntIndex } ::= { pm1004dcpCntupTimCntTable 1 } Pm1004dcpCntupTimCntEntry ::= SEQUENCE { pm1004dcpCntupTimCntIndex INTEGER, pm1004dcpCntupTimCntValuePortn Counter32, pm1004dcpCntupTimCntErrorPortn EkiOnOff, pm1004dcpCntupTimCntOverloadPortn EkiOnOff } pm1004dcpCntupTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntupTimCnt table " ::= { pm1004dcpCntupTimCntEntry 1 } pm1004dcpCntupTimCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. " ::= { pm1004dcpCntupTimCntEntry 2 } pm1004dcpCntupTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port " ::= { pm1004dcpCntupTimCntEntry 3 } pm1004dcpCntupTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port " ::= { pm1004dcpCntupTimCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntupCvErrCnt articles --- ********************************************************* pm1004dcpCntupCvErrCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntupCvErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntupCvErrCnt Article " ::= { pm1004dcpCntClient 48 } pm1004dcpCntupCvErrCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntupCvErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntupCvErrCnt table " INDEX { pm1004dcpCntupCvErrCntIndex } ::= { pm1004dcpCntupCvErrCntTable 1 } Pm1004dcpCntupCvErrCntEntry ::= SEQUENCE { pm1004dcpCntupCvErrCntIndex INTEGER, pm1004dcpCntupCvErrCntValuePortn Counter32, pm1004dcpCntupCvErrCntErrorPortn EkiOnOff, pm1004dcpCntupCvErrCntOverloadPortn EkiOnOff } pm1004dcpCntupCvErrCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntupCvErrCnt table " ::= { pm1004dcpCntupCvErrCntEntry 1 } pm1004dcpCntupCvErrCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream " ::= { pm1004dcpCntupCvErrCntEntry 2 } pm1004dcpCntupCvErrCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Port " ::= { pm1004dcpCntupCvErrCntEntry 3 } pm1004dcpCntupCvErrCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a coding violation counter overload on Port " ::= { pm1004dcpCntupCvErrCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntdwCbipCnt articles --- ********************************************************* pm1004dcpCntdwCbipCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntdwCbipCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntdwCbipCnt Article " ::= { pm1004dcpCntClient 64 } pm1004dcpCntdwCbipCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntdwCbipCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntdwCbipCnt table " INDEX { pm1004dcpCntdwCbipCntIndex } ::= { pm1004dcpCntdwCbipCntTable 1 } Pm1004dcpCntdwCbipCntEntry ::= SEQUENCE { pm1004dcpCntdwCbipCntIndex INTEGER, pm1004dcpCntdwCbipCntValuePortn Counter32, pm1004dcpCntdwCbipCntErrorPortn EkiOnOff, pm1004dcpCntdwCbipCntOverloadPortn EkiOnOff } pm1004dcpCntdwCbipCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntdwCbipCnt table " ::= { pm1004dcpCntdwCbipCntEntry 1 } pm1004dcpCntdwCbipCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream This counter gives the number of B1 errors on the client output port " ::= { pm1004dcpCntdwCbipCntEntry 2 } pm1004dcpCntdwCbipCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port " ::= { pm1004dcpCntdwCbipCntEntry 3 } pm1004dcpCntdwCbipCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port " ::= { pm1004dcpCntdwCbipCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntdwTimCnt articles --- ********************************************************* pm1004dcpCntdwTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntdwTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntdwTimCnt Article " ::= { pm1004dcpCntClient 72 } pm1004dcpCntdwTimCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntdwTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntdwTimCnt table " INDEX { pm1004dcpCntdwTimCntIndex } ::= { pm1004dcpCntdwTimCntTable 1 } Pm1004dcpCntdwTimCntEntry ::= SEQUENCE { pm1004dcpCntdwTimCntIndex INTEGER, pm1004dcpCntdwTimCntValuePortn Counter32, pm1004dcpCntdwTimCntErrorPortn EkiOnOff, pm1004dcpCntdwTimCntOverloadPortn EkiOnOff } pm1004dcpCntdwTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntdwTimCnt table " ::= { pm1004dcpCntdwTimCntEntry 1 } pm1004dcpCntdwTimCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. " ::= { pm1004dcpCntdwTimCntEntry 2 } pm1004dcpCntdwTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port " ::= { pm1004dcpCntdwTimCntEntry 3 } pm1004dcpCntdwTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port " ::= { pm1004dcpCntdwTimCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntdfrmB1ErrCnt articles --- ********************************************************* pm1004dcpCntdfrmB1ErrCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntdfrmB1ErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntdfrmB1ErrCnt Article " ::= { pm1004dcpCntLine 152 } pm1004dcpCntdfrmB1ErrCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntdfrmB1ErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntdfrmB1ErrCnt table " INDEX { pm1004dcpCntdfrmB1ErrCntIndex } ::= { pm1004dcpCntdfrmB1ErrCntTable 1 } Pm1004dcpCntdfrmB1ErrCntEntry ::= SEQUENCE { pm1004dcpCntdfrmB1ErrCntIndex INTEGER, pm1004dcpCntdfrmB1ErrCntValuePortn Counter32, pm1004dcpCntdfrmB1ErrCntErrorPortn EkiOnOff, pm1004dcpCntdfrmB1ErrCntOverloadPortn EkiOnOff } pm1004dcpCntdfrmB1ErrCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntdfrmB1ErrCnt table " ::= { pm1004dcpCntdfrmB1ErrCntEntry 1 } pm1004dcpCntdfrmB1ErrCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SM-BIP8 Errors :This counter is incremented each time a SM BIP error is detected on the Deframer input stream. This counter gives the number of SM-BIP8 errors on the line port " ::= { pm1004dcpCntdfrmB1ErrCntEntry 2 } pm1004dcpCntdfrmB1ErrCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the SM BIP error counter value is invalid on Port " ::= { pm1004dcpCntdfrmB1ErrCntEntry 3 } pm1004dcpCntdfrmB1ErrCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a SM BIP error counter overload on Port " ::= { pm1004dcpCntdfrmB1ErrCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntdfrmTimCnt articles --- ********************************************************* pm1004dcpCntdfrmTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntdfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntdfrmTimCnt Article " ::= { pm1004dcpCntLine 153 } pm1004dcpCntdfrmTimCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntdfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntdfrmTimCnt table " INDEX { pm1004dcpCntdfrmTimCntIndex } ::= { pm1004dcpCntdfrmTimCntTable 1 } Pm1004dcpCntdfrmTimCntEntry ::= SEQUENCE { pm1004dcpCntdfrmTimCntIndex INTEGER, pm1004dcpCntdfrmTimCntValuePortn Counter32, pm1004dcpCntdfrmTimCntErrorPortn EkiOnOff, pm1004dcpCntdfrmTimCntOverloadPortn EkiOnOff } pm1004dcpCntdfrmTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntdfrmTimCnt table " ::= { pm1004dcpCntdfrmTimCntEntry 1 } pm1004dcpCntdfrmTimCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. " ::= { pm1004dcpCntdfrmTimCntEntry 2 } pm1004dcpCntdfrmTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm1004dcpCntdfrmTimCntEntry 3 } pm1004dcpCntdfrmTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm1004dcpCntdfrmTimCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004dcpCntdfrmPrimLineErrCnt articles --- ********************************************************* pm1004dcpCntdfrmPrimLineErrCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCntdfrmPrimLineErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpCntdfrmPrimLineErrCnt Article " ::= { pm1004dcpCntLine 154 } pm1004dcpCntdfrmPrimLineErrCntEntry OBJECT-TYPE SYNTAX Pm1004dcpCntdfrmPrimLineErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpCntdfrmPrimLineErrCnt table " INDEX { pm1004dcpCntdfrmPrimLineErrCntIndex } ::= { pm1004dcpCntdfrmPrimLineErrCntTable 1 } Pm1004dcpCntdfrmPrimLineErrCntEntry ::= SEQUENCE { pm1004dcpCntdfrmPrimLineErrCntIndex INTEGER, pm1004dcpCntdfrmPrimLineErrCntValuePortn Counter32, pm1004dcpCntdfrmPrimLineErrCntErrorPortn EkiOnOff, pm1004dcpCntdfrmPrimLineErrCntOverloadPortn EkiOnOff } pm1004dcpCntdfrmPrimLineErrCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpCntdfrmPrimLineErrCnt table " ::= { pm1004dcpCntdfrmPrimLineErrCntEntry 1 } pm1004dcpCntdfrmPrimLineErrCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input FEC Corrected Errors :This counter is incremented each time the FEC is correcting an error on the line input stream. This counter gives the number of errors corrected by the FEC on the line port " ::= { pm1004dcpCntdfrmPrimLineErrCntEntry 2 } pm1004dcpCntdfrmPrimLineErrCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line " ::= { pm1004dcpCntdfrmPrimLineErrCntEntry 3 } pm1004dcpCntdfrmPrimLineErrCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line " ::= { pm1004dcpCntdfrmPrimLineErrCntEntry 4 } pm1004dcpCntCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters Reset:This OID resets and restarts all the counters" ::= { pm1004dcpcounters 259 } pm1004dcpCntCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters stop:This OID stops all the counters" ::= { pm1004dcpcounters 260 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- J0 --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm1004dcpMesrsynth0 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) " ::= { pm1004dcpMesrOther 0 } pm1004dcpMesrsynth1 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) " ::= { pm1004dcpMesrOther 1 } --- ********************************************************* --- TABLE for the pm1004dcpMesrtempMeas articles --- ********************************************************* pm1004dcpMesrtempMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrtempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrtempMeas Article " ::= { pm1004dcpMesrClient 16 } pm1004dcpMesrtempMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrtempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrtempMeas table " INDEX { pm1004dcpMesrtempMeasIndex } ::= { pm1004dcpMesrtempMeasTable 1 } Pm1004dcpMesrtempMeasEntry ::= SEQUENCE { pm1004dcpMesrtempMeasIndex INTEGER, pm1004dcpMesrtempMeasPortn INTEGER } pm1004dcpMesrtempMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrtempMeas table " ::= { pm1004dcpMesrtempMeasEntry 1 } pm1004dcpMesrtempMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the client transceiver " ::= { pm1004dcpMesrtempMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrvoltMeas articles --- ********************************************************* pm1004dcpMesrvoltMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrvoltMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrvoltMeas Article " ::= { pm1004dcpMesrClient 24 } pm1004dcpMesrvoltMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrvoltMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrvoltMeas table " INDEX { pm1004dcpMesrvoltMeasIndex } ::= { pm1004dcpMesrvoltMeasTable 1 } Pm1004dcpMesrvoltMeasEntry ::= SEQUENCE { pm1004dcpMesrvoltMeasIndex INTEGER, pm1004dcpMesrvoltMeasPortn INTEGER } pm1004dcpMesrvoltMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrvoltMeas table " ::= { pm1004dcpMesrvoltMeasEntry 1 } pm1004dcpMesrvoltMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) This measure gives the 3V3 voltage of the client transceiver " ::= { pm1004dcpMesrvoltMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrbiasMeas articles --- ********************************************************* pm1004dcpMesrbiasMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrbiasMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrbiasMeas Article " ::= { pm1004dcpMesrClient 32 } pm1004dcpMesrbiasMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrbiasMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrbiasMeas table " INDEX { pm1004dcpMesrbiasMeasIndex } ::= { pm1004dcpMesrbiasMeasTable 1 } Pm1004dcpMesrbiasMeasEntry ::= SEQUENCE { pm1004dcpMesrbiasMeasIndex INTEGER, pm1004dcpMesrbiasMeasPortn INTEGER } pm1004dcpMesrbiasMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrbiasMeas table " ::= { pm1004dcpMesrbiasMeasEntry 1 } pm1004dcpMesrbiasMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the client transceiver " ::= { pm1004dcpMesrbiasMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrtxpwrMeas articles --- ********************************************************* pm1004dcpMesrtxpwrMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrtxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrtxpwrMeas Article " ::= { pm1004dcpMesrClient 40 } pm1004dcpMesrtxpwrMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrtxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrtxpwrMeas table " INDEX { pm1004dcpMesrtxpwrMeasIndex } ::= { pm1004dcpMesrtxpwrMeasTable 1 } Pm1004dcpMesrtxpwrMeasEntry ::= SEQUENCE { pm1004dcpMesrtxpwrMeasIndex INTEGER, pm1004dcpMesrtxpwrMeasPortn INTEGER } pm1004dcpMesrtxpwrMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrtxpwrMeas table " ::= { pm1004dcpMesrtxpwrMeasEntry 1 } pm1004dcpMesrtxpwrMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the client transceiver " ::= { pm1004dcpMesrtxpwrMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrrxpwrMeas articles --- ********************************************************* pm1004dcpMesrrxpwrMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrrxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrrxpwrMeas Article " ::= { pm1004dcpMesrClient 48 } pm1004dcpMesrrxpwrMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrrxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrrxpwrMeas table " INDEX { pm1004dcpMesrrxpwrMeasIndex } ::= { pm1004dcpMesrrxpwrMeasTable 1 } Pm1004dcpMesrrxpwrMeasEntry ::= SEQUENCE { pm1004dcpMesrrxpwrMeasIndex INTEGER, pm1004dcpMesrrxpwrMeasPortn INTEGER } pm1004dcpMesrrxpwrMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrrxpwrMeas table " ::= { pm1004dcpMesrrxpwrMeasEntry 1 } pm1004dcpMesrrxpwrMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the client transceiver " ::= { pm1004dcpMesrrxpwrMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LxModTempMeas articles --- ********************************************************* pm1004dcpMesrxfp1LxModTempMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LxModTempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrxfp1LxModTempMeas Article " ::= { pm1004dcpMesrLine 208 } pm1004dcpMesrxfp1LxModTempMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LxModTempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LxModTempMeas table " INDEX { pm1004dcpMesrxfp1LxModTempMeasIndex } ::= { pm1004dcpMesrxfp1LxModTempMeasTable 1 } Pm1004dcpMesrxfp1LxModTempMeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LxModTempMeasIndex INTEGER, pm1004dcpMesrxfp1LxModTempMeasPortn INTEGER } pm1004dcpMesrxfp1LxModTempMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LxModTempMeas table " ::= { pm1004dcpMesrxfp1LxModTempMeasEntry 1 } pm1004dcpMesrxfp1LxModTempMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the line transceiver " ::= { pm1004dcpMesrxfp1LxModTempMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1Reserved articles --- ********************************************************* pm1004dcpMesrxfp1ReservedTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1ReservedEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004dcpMesrxfp1Reserved Article " ::= { pm1004dcpMesrLine 209 } pm1004dcpMesrxfp1ReservedEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1ReservedEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004dcpMesrxfp1Reserved table " INDEX { pm1004dcpMesrxfp1ReservedIndex } ::= { pm1004dcpMesrxfp1ReservedTable 1 } Pm1004dcpMesrxfp1ReservedEntry ::= SEQUENCE { pm1004dcpMesrxfp1ReservedIndex INTEGER, pm1004dcpMesrxfp1ReservedPortn INTEGER } pm1004dcpMesrxfp1ReservedIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004dcpMesrxfp1Reserved table " ::= { pm1004dcpMesrxfp1ReservedEntry 1 } pm1004dcpMesrxfp1ReservedPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :Reserved " ::= { pm1004dcpMesrxfp1ReservedEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LoBiasCurrentMeas articles --- ********************************************************* pm1004dcpMesrxfp1LoBiasCurrentMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LoBiasCurrentMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrxfp1LoBiasCurrentMeas Article " ::= { pm1004dcpMesrLine 210 } pm1004dcpMesrxfp1LoBiasCurrentMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LoBiasCurrentMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LoBiasCurrentMeas table " INDEX { pm1004dcpMesrxfp1LoBiasCurrentMeasIndex } ::= { pm1004dcpMesrxfp1LoBiasCurrentMeasTable 1 } Pm1004dcpMesrxfp1LoBiasCurrentMeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LoBiasCurrentMeasIndex INTEGER, pm1004dcpMesrxfp1LoBiasCurrentMeasPortn INTEGER } pm1004dcpMesrxfp1LoBiasCurrentMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LoBiasCurrentMeas table " ::= { pm1004dcpMesrxfp1LoBiasCurrentMeasEntry 1 } pm1004dcpMesrxfp1LoBiasCurrentMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the line transceiver " ::= { pm1004dcpMesrxfp1LoBiasCurrentMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LoTxPowerMeas articles --- ********************************************************* pm1004dcpMesrxfp1LoTxPowerMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LoTxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrxfp1LoTxPowerMeas Article " ::= { pm1004dcpMesrLine 211 } pm1004dcpMesrxfp1LoTxPowerMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LoTxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LoTxPowerMeas table " INDEX { pm1004dcpMesrxfp1LoTxPowerMeasIndex } ::= { pm1004dcpMesrxfp1LoTxPowerMeasTable 1 } Pm1004dcpMesrxfp1LoTxPowerMeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LoTxPowerMeasIndex INTEGER, pm1004dcpMesrxfp1LoTxPowerMeasPortn INTEGER } pm1004dcpMesrxfp1LoTxPowerMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LoTxPowerMeas table " ::= { pm1004dcpMesrxfp1LoTxPowerMeasEntry 1 } pm1004dcpMesrxfp1LoTxPowerMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the line transceiver " ::= { pm1004dcpMesrxfp1LoTxPowerMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LiRxPowerMeas articles --- ********************************************************* pm1004dcpMesrxfp1LiRxPowerMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LiRxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrxfp1LiRxPowerMeas Article " ::= { pm1004dcpMesrLine 212 } pm1004dcpMesrxfp1LiRxPowerMeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LiRxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LiRxPowerMeas table " INDEX { pm1004dcpMesrxfp1LiRxPowerMeasIndex } ::= { pm1004dcpMesrxfp1LiRxPowerMeasTable 1 } Pm1004dcpMesrxfp1LiRxPowerMeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LiRxPowerMeasIndex INTEGER, pm1004dcpMesrxfp1LiRxPowerMeasPortn INTEGER } pm1004dcpMesrxfp1LiRxPowerMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LiRxPowerMeas table " ::= { pm1004dcpMesrxfp1LiRxPowerMeasEntry 1 } pm1004dcpMesrxfp1LiRxPowerMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the line transceiver " ::= { pm1004dcpMesrxfp1LiRxPowerMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LxAux1Meas articles --- ********************************************************* pm1004dcpMesrxfp1LxAux1MeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LxAux1MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004dcpMesrxfp1LxAux1Meas Article " ::= { pm1004dcpMesrLine 213 } pm1004dcpMesrxfp1LxAux1MeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LxAux1MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LxAux1Meas table " INDEX { pm1004dcpMesrxfp1LxAux1MeasIndex } ::= { pm1004dcpMesrxfp1LxAux1MeasTable 1 } Pm1004dcpMesrxfp1LxAux1MeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LxAux1MeasIndex INTEGER, pm1004dcpMesrxfp1LxAux1MeasPortn INTEGER } pm1004dcpMesrxfp1LxAux1MeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LxAux1Meas table " ::= { pm1004dcpMesrxfp1LxAux1MeasEntry 1 } pm1004dcpMesrxfp1LxAux1MeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) " ::= { pm1004dcpMesrxfp1LxAux1MeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrxfp1LxAux2Meas articles --- ********************************************************* pm1004dcpMesrxfp1LxAux2MeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrxfp1LxAux2MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004dcpMesrxfp1LxAux2Meas Article " ::= { pm1004dcpMesrLine 214 } pm1004dcpMesrxfp1LxAux2MeasEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrxfp1LxAux2MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004dcpMesrxfp1LxAux2Meas table " INDEX { pm1004dcpMesrxfp1LxAux2MeasIndex } ::= { pm1004dcpMesrxfp1LxAux2MeasTable 1 } Pm1004dcpMesrxfp1LxAux2MeasEntry ::= SEQUENCE { pm1004dcpMesrxfp1LxAux2MeasIndex INTEGER, pm1004dcpMesrxfp1LxAux2MeasPortn INTEGER } pm1004dcpMesrxfp1LxAux2MeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004dcpMesrxfp1LxAux2Meas table " ::= { pm1004dcpMesrxfp1LxAux2MeasEntry 1 } pm1004dcpMesrxfp1LxAux2MeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) " ::= { pm1004dcpMesrxfp1LxAux2MeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrotx1Aging articles --- ********************************************************* pm1004dcpMesrotx1AgingTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrotx1AgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrotx1Aging Article " ::= { pm1004dcpMesrLine 224 } pm1004dcpMesrotx1AgingEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrotx1AgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrotx1Aging table " INDEX { pm1004dcpMesrotx1AgingIndex } ::= { pm1004dcpMesrotx1AgingTable 1 } Pm1004dcpMesrotx1AgingEntry ::= SEQUENCE { pm1004dcpMesrotx1AgingIndex INTEGER, pm1004dcpMesrotx1AgingPortn INTEGER } pm1004dcpMesrotx1AgingIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrotx1Aging table " ::= { pm1004dcpMesrotx1AgingEntry 1 } pm1004dcpMesrotx1AgingPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) This measure gives the aging of the Line OTX TLH " ::= { pm1004dcpMesrotx1AgingEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrotx1LaserTemperature articles --- ********************************************************* pm1004dcpMesrotx1LaserTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrotx1LaserTemperatureEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004dcpMesrotx1LaserTemperature Article " ::= { pm1004dcpMesrLine 225 } pm1004dcpMesrotx1LaserTemperatureEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrotx1LaserTemperatureEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004dcpMesrotx1LaserTemperature table " INDEX { pm1004dcpMesrotx1LaserTemperatureIndex } ::= { pm1004dcpMesrotx1LaserTemperatureTable 1 } Pm1004dcpMesrotx1LaserTemperatureEntry ::= SEQUENCE { pm1004dcpMesrotx1LaserTemperatureIndex INTEGER, pm1004dcpMesrotx1LaserTemperaturePortn INTEGER } pm1004dcpMesrotx1LaserTemperatureIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004dcpMesrotx1LaserTemperature table " ::= { pm1004dcpMesrotx1LaserTemperatureEntry 1 } pm1004dcpMesrotx1LaserTemperaturePortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the laser temperature of the Line OTX TLH " ::= { pm1004dcpMesrotx1LaserTemperatureEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrotx1FreqDeviation articles --- ********************************************************* pm1004dcpMesrotx1FreqDeviationTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrotx1FreqDeviationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrotx1FreqDeviation Article " ::= { pm1004dcpMesrLine 226 } pm1004dcpMesrotx1FreqDeviationEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrotx1FreqDeviationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrotx1FreqDeviation table " INDEX { pm1004dcpMesrotx1FreqDeviationIndex } ::= { pm1004dcpMesrotx1FreqDeviationTable 1 } Pm1004dcpMesrotx1FreqDeviationEntry ::= SEQUENCE { pm1004dcpMesrotx1FreqDeviationIndex INTEGER, pm1004dcpMesrotx1FreqDeviationPortn INTEGER } pm1004dcpMesrotx1FreqDeviationIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrotx1FreqDeviation table " ::= { pm1004dcpMesrotx1FreqDeviationEntry 1 } pm1004dcpMesrotx1FreqDeviationPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) This measure gives the frequency deviation of the Line OTX TLH " ::= { pm1004dcpMesrotx1FreqDeviationEntry 2 } --- ********************************************************* --- TABLE for the pm1004dcpMesrotx1LaserWvlength articles --- ********************************************************* pm1004dcpMesrotx1LaserWvlengthTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpMesrotx1LaserWvlengthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpMesrotx1LaserWvlength Article " ::= { pm1004dcpMesrLine 227 } pm1004dcpMesrotx1LaserWvlengthEntry OBJECT-TYPE SYNTAX Pm1004dcpMesrotx1LaserWvlengthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpMesrotx1LaserWvlength table " INDEX { pm1004dcpMesrotx1LaserWvlengthIndex } ::= { pm1004dcpMesrotx1LaserWvlengthTable 1 } Pm1004dcpMesrotx1LaserWvlengthEntry ::= SEQUENCE { pm1004dcpMesrotx1LaserWvlengthIndex INTEGER, pm1004dcpMesrotx1LaserWvlengthPortn INTEGER } pm1004dcpMesrotx1LaserWvlengthIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpMesrotx1LaserWvlength table " ::= { pm1004dcpMesrotx1LaserWvlengthEntry 1 } pm1004dcpMesrotx1LaserWvlengthPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) This measure gives the laser wavelength of the Line OTX TLH " ::= { pm1004dcpMesrotx1LaserWvlengthEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- PERFORMANCE --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm1004dcpPerfUpCurrent15Cnt articles --- ********************************************************* pm1004dcpPerfUpCurrent15CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfUpCurrent15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfUpCurrent15Cnt Article " ::= { pm1004dcpMonClientPerformance 16 } pm1004dcpPerfUpCurrent15CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfUpCurrent15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfUpCurrent15Cnt table " INDEX { pm1004dcpPerfUpCurrent15CntIndex } ::= { pm1004dcpPerfUpCurrent15CntTable 1 } Pm1004dcpPerfUpCurrent15CntEntry ::= SEQUENCE { pm1004dcpPerfUpCurrent15CntIndex INTEGER, pm1004dcpPerfUpCurrent15CntInvCvPortn EkiOnOff, pm1004dcpPerfUpCurrent15CntCvValuePortn Unsigned32, pm1004dcpPerfUpCurrent15CntInvEsPortn EkiOnOff, pm1004dcpPerfUpCurrent15CntEsValuePortn Unsigned32, pm1004dcpPerfUpCurrent15CntInvSesPortn EkiOnOff, pm1004dcpPerfUpCurrent15CntSesValuePortn Unsigned32, pm1004dcpPerfUpCurrent15CntInvSefsPortn EkiOnOff, pm1004dcpPerfUpCurrent15CntSefsValuePortn Unsigned32, pm1004dcpPerfUpCurrent15CntInvUasPortn EkiOnOff, pm1004dcpPerfUpCurrent15CntUasValuePortn Unsigned32 } pm1004dcpPerfUpCurrent15CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfUpCurrent15Cnt table " ::= { pm1004dcpPerfUpCurrent15CntEntry 1 } pm1004dcpPerfUpCurrent15CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid " ::= { pm1004dcpPerfUpCurrent15CntEntry 2 } pm1004dcpPerfUpCurrent15CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value " ::= { pm1004dcpPerfUpCurrent15CntEntry 3 } pm1004dcpPerfUpCurrent15CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid " ::= { pm1004dcpPerfUpCurrent15CntEntry 4 } pm1004dcpPerfUpCurrent15CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value " ::= { pm1004dcpPerfUpCurrent15CntEntry 5 } pm1004dcpPerfUpCurrent15CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid " ::= { pm1004dcpPerfUpCurrent15CntEntry 6 } pm1004dcpPerfUpCurrent15CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value " ::= { pm1004dcpPerfUpCurrent15CntEntry 7 } pm1004dcpPerfUpCurrent15CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfUpCurrent15CntEntry 8 } pm1004dcpPerfUpCurrent15CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value " ::= { pm1004dcpPerfUpCurrent15CntEntry 9 } pm1004dcpPerfUpCurrent15CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid " ::= { pm1004dcpPerfUpCurrent15CntEntry 10 } pm1004dcpPerfUpCurrent15CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value " ::= { pm1004dcpPerfUpCurrent15CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfUpPast15Cnt articles --- ********************************************************* pm1004dcpPerfUpPast15CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfUpPast15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfUpPast15Cnt Article " ::= { pm1004dcpMonClientPerformance 24 } pm1004dcpPerfUpPast15CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfUpPast15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfUpPast15Cnt table " INDEX { pm1004dcpPerfUpPast15CntIndex } ::= { pm1004dcpPerfUpPast15CntTable 1 } Pm1004dcpPerfUpPast15CntEntry ::= SEQUENCE { pm1004dcpPerfUpPast15CntIndex INTEGER, pm1004dcpPerfUpPast15CntInvCvPortn EkiOnOff, pm1004dcpPerfUpPast15CntCvValuePortn Unsigned32, pm1004dcpPerfUpPast15CntInvEsPortn EkiOnOff, pm1004dcpPerfUpPast15CntEsValuePortn Unsigned32, pm1004dcpPerfUpPast15CntInvSesPortn EkiOnOff, pm1004dcpPerfUpPast15CntSesValuePortn Unsigned32, pm1004dcpPerfUpPast15CntInvSefsPortn EkiOnOff, pm1004dcpPerfUpPast15CntSefsValuePortn Unsigned32, pm1004dcpPerfUpPast15CntInvUasPortn EkiOnOff, pm1004dcpPerfUpPast15CntUasValuePortn Unsigned32 } pm1004dcpPerfUpPast15CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfUpPast15Cnt table " ::= { pm1004dcpPerfUpPast15CntEntry 1 } pm1004dcpPerfUpPast15CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid " ::= { pm1004dcpPerfUpPast15CntEntry 2 } pm1004dcpPerfUpPast15CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value " ::= { pm1004dcpPerfUpPast15CntEntry 3 } pm1004dcpPerfUpPast15CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid " ::= { pm1004dcpPerfUpPast15CntEntry 4 } pm1004dcpPerfUpPast15CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value " ::= { pm1004dcpPerfUpPast15CntEntry 5 } pm1004dcpPerfUpPast15CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid " ::= { pm1004dcpPerfUpPast15CntEntry 6 } pm1004dcpPerfUpPast15CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value " ::= { pm1004dcpPerfUpPast15CntEntry 7 } pm1004dcpPerfUpPast15CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfUpPast15CntEntry 8 } pm1004dcpPerfUpPast15CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value " ::= { pm1004dcpPerfUpPast15CntEntry 9 } pm1004dcpPerfUpPast15CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid " ::= { pm1004dcpPerfUpPast15CntEntry 10 } pm1004dcpPerfUpPast15CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value " ::= { pm1004dcpPerfUpPast15CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfUpCurrent24Cnt articles --- ********************************************************* pm1004dcpPerfUpCurrent24CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfUpCurrent24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfUpCurrent24Cnt Article " ::= { pm1004dcpMonClientPerformance 32 } pm1004dcpPerfUpCurrent24CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfUpCurrent24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfUpCurrent24Cnt table " INDEX { pm1004dcpPerfUpCurrent24CntIndex } ::= { pm1004dcpPerfUpCurrent24CntTable 1 } Pm1004dcpPerfUpCurrent24CntEntry ::= SEQUENCE { pm1004dcpPerfUpCurrent24CntIndex INTEGER, pm1004dcpPerfUpCurrent24CntInvCvPortn EkiOnOff, pm1004dcpPerfUpCurrent24CntCvValuePortn Unsigned32, pm1004dcpPerfUpCurrent24CntInvEsPortn EkiOnOff, pm1004dcpPerfUpCurrent24CntEsValuePortn Unsigned32, pm1004dcpPerfUpCurrent24CntInvSesPortn EkiOnOff, pm1004dcpPerfUpCurrent24CntSesValuePortn Unsigned32, pm1004dcpPerfUpCurrent24CntInvSefsPortn EkiOnOff, pm1004dcpPerfUpCurrent24CntSefsValuePortn Unsigned32, pm1004dcpPerfUpCurrent24CntInvUasPortn EkiOnOff, pm1004dcpPerfUpCurrent24CntUasValuePortn Unsigned32 } pm1004dcpPerfUpCurrent24CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfUpCurrent24Cnt table " ::= { pm1004dcpPerfUpCurrent24CntEntry 1 } pm1004dcpPerfUpCurrent24CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid " ::= { pm1004dcpPerfUpCurrent24CntEntry 2 } pm1004dcpPerfUpCurrent24CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value " ::= { pm1004dcpPerfUpCurrent24CntEntry 3 } pm1004dcpPerfUpCurrent24CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid " ::= { pm1004dcpPerfUpCurrent24CntEntry 4 } pm1004dcpPerfUpCurrent24CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value " ::= { pm1004dcpPerfUpCurrent24CntEntry 5 } pm1004dcpPerfUpCurrent24CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid " ::= { pm1004dcpPerfUpCurrent24CntEntry 6 } pm1004dcpPerfUpCurrent24CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value " ::= { pm1004dcpPerfUpCurrent24CntEntry 7 } pm1004dcpPerfUpCurrent24CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfUpCurrent24CntEntry 8 } pm1004dcpPerfUpCurrent24CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value " ::= { pm1004dcpPerfUpCurrent24CntEntry 9 } pm1004dcpPerfUpCurrent24CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid " ::= { pm1004dcpPerfUpCurrent24CntEntry 10 } pm1004dcpPerfUpCurrent24CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value " ::= { pm1004dcpPerfUpCurrent24CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfUpPast24Cnt articles --- ********************************************************* pm1004dcpPerfUpPast24CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfUpPast24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfUpPast24Cnt Article " ::= { pm1004dcpMonClientPerformance 40 } pm1004dcpPerfUpPast24CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfUpPast24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfUpPast24Cnt table " INDEX { pm1004dcpPerfUpPast24CntIndex } ::= { pm1004dcpPerfUpPast24CntTable 1 } Pm1004dcpPerfUpPast24CntEntry ::= SEQUENCE { pm1004dcpPerfUpPast24CntIndex INTEGER, pm1004dcpPerfUpPast24CntInvCvPortn EkiOnOff, pm1004dcpPerfUpPast24CntCvValuePortn Unsigned32, pm1004dcpPerfUpPast24CntInvEsPortn EkiOnOff, pm1004dcpPerfUpPast24CntEsValuePortn Unsigned32, pm1004dcpPerfUpPast24CntInvSesPortn EkiOnOff, pm1004dcpPerfUpPast24CntSesValuePortn Unsigned32, pm1004dcpPerfUpPast24CntInvSefsPortn EkiOnOff, pm1004dcpPerfUpPast24CntSefsValuePortn Unsigned32, pm1004dcpPerfUpPast24CntInvUasPortn EkiOnOff, pm1004dcpPerfUpPast24CntUasValuePortn Unsigned32 } pm1004dcpPerfUpPast24CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfUpPast24Cnt table " ::= { pm1004dcpPerfUpPast24CntEntry 1 } pm1004dcpPerfUpPast24CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid " ::= { pm1004dcpPerfUpPast24CntEntry 2 } pm1004dcpPerfUpPast24CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value " ::= { pm1004dcpPerfUpPast24CntEntry 3 } pm1004dcpPerfUpPast24CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid " ::= { pm1004dcpPerfUpPast24CntEntry 4 } pm1004dcpPerfUpPast24CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value " ::= { pm1004dcpPerfUpPast24CntEntry 5 } pm1004dcpPerfUpPast24CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid " ::= { pm1004dcpPerfUpPast24CntEntry 6 } pm1004dcpPerfUpPast24CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value " ::= { pm1004dcpPerfUpPast24CntEntry 7 } pm1004dcpPerfUpPast24CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfUpPast24CntEntry 8 } pm1004dcpPerfUpPast24CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value " ::= { pm1004dcpPerfUpPast24CntEntry 9 } pm1004dcpPerfUpPast24CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid " ::= { pm1004dcpPerfUpPast24CntEntry 10 } pm1004dcpPerfUpPast24CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value " ::= { pm1004dcpPerfUpPast24CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfLineCurrent15Cnt articles --- ********************************************************* pm1004dcpPerfLineCurrent15CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfLineCurrent15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfLineCurrent15Cnt Article " ::= { pm1004dcpMonLinePerformance 128 } pm1004dcpPerfLineCurrent15CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfLineCurrent15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfLineCurrent15Cnt table " INDEX { pm1004dcpPerfLineCurrent15CntIndex } ::= { pm1004dcpPerfLineCurrent15CntTable 1 } Pm1004dcpPerfLineCurrent15CntEntry ::= SEQUENCE { pm1004dcpPerfLineCurrent15CntIndex INTEGER, pm1004dcpPerfLineCurrent15CntInvCvPortn EkiOnOff, pm1004dcpPerfLineCurrent15CntCvValuePortn Unsigned32, pm1004dcpPerfLineCurrent15CntInvEsPortn EkiOnOff, pm1004dcpPerfLineCurrent15CntEsValuePortn Unsigned32, pm1004dcpPerfLineCurrent15CntInvSesPortn EkiOnOff, pm1004dcpPerfLineCurrent15CntSesValuePortn Unsigned32, pm1004dcpPerfLineCurrent15CntInvSefsPortn EkiOnOff, pm1004dcpPerfLineCurrent15CntSefsValuePortn Unsigned32, pm1004dcpPerfLineCurrent15CntInvUasPortn EkiOnOff, pm1004dcpPerfLineCurrent15CntUasValuePortn Unsigned32 } pm1004dcpPerfLineCurrent15CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfLineCurrent15Cnt table " ::= { pm1004dcpPerfLineCurrent15CntEntry 1 } pm1004dcpPerfLineCurrent15CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid " ::= { pm1004dcpPerfLineCurrent15CntEntry 2 } pm1004dcpPerfLineCurrent15CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value " ::= { pm1004dcpPerfLineCurrent15CntEntry 3 } pm1004dcpPerfLineCurrent15CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid " ::= { pm1004dcpPerfLineCurrent15CntEntry 4 } pm1004dcpPerfLineCurrent15CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value " ::= { pm1004dcpPerfLineCurrent15CntEntry 5 } pm1004dcpPerfLineCurrent15CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid " ::= { pm1004dcpPerfLineCurrent15CntEntry 6 } pm1004dcpPerfLineCurrent15CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value " ::= { pm1004dcpPerfLineCurrent15CntEntry 7 } pm1004dcpPerfLineCurrent15CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfLineCurrent15CntEntry 8 } pm1004dcpPerfLineCurrent15CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value " ::= { pm1004dcpPerfLineCurrent15CntEntry 9 } pm1004dcpPerfLineCurrent15CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid " ::= { pm1004dcpPerfLineCurrent15CntEntry 10 } pm1004dcpPerfLineCurrent15CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value " ::= { pm1004dcpPerfLineCurrent15CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfLinePast15Cnt articles --- ********************************************************* pm1004dcpPerfLinePast15CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfLinePast15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfLinePast15Cnt Article " ::= { pm1004dcpMonLinePerformance 129 } pm1004dcpPerfLinePast15CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfLinePast15CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfLinePast15Cnt table " INDEX { pm1004dcpPerfLinePast15CntIndex } ::= { pm1004dcpPerfLinePast15CntTable 1 } Pm1004dcpPerfLinePast15CntEntry ::= SEQUENCE { pm1004dcpPerfLinePast15CntIndex INTEGER, pm1004dcpPerfLinePast15CntInvCvPortn EkiOnOff, pm1004dcpPerfLinePast15CntCvValuePortn Unsigned32, pm1004dcpPerfLinePast15CntInvEsPortn EkiOnOff, pm1004dcpPerfLinePast15CntEsValuePortn Unsigned32, pm1004dcpPerfLinePast15CntInvSesPortn EkiOnOff, pm1004dcpPerfLinePast15CntSesValuePortn Unsigned32, pm1004dcpPerfLinePast15CntInvSefsPortn EkiOnOff, pm1004dcpPerfLinePast15CntSefsValuePortn Unsigned32, pm1004dcpPerfLinePast15CntInvUasPortn EkiOnOff, pm1004dcpPerfLinePast15CntUasValuePortn Unsigned32 } pm1004dcpPerfLinePast15CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfLinePast15Cnt table " ::= { pm1004dcpPerfLinePast15CntEntry 1 } pm1004dcpPerfLinePast15CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid " ::= { pm1004dcpPerfLinePast15CntEntry 2 } pm1004dcpPerfLinePast15CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value " ::= { pm1004dcpPerfLinePast15CntEntry 3 } pm1004dcpPerfLinePast15CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid " ::= { pm1004dcpPerfLinePast15CntEntry 4 } pm1004dcpPerfLinePast15CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value " ::= { pm1004dcpPerfLinePast15CntEntry 5 } pm1004dcpPerfLinePast15CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid " ::= { pm1004dcpPerfLinePast15CntEntry 6 } pm1004dcpPerfLinePast15CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value " ::= { pm1004dcpPerfLinePast15CntEntry 7 } pm1004dcpPerfLinePast15CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfLinePast15CntEntry 8 } pm1004dcpPerfLinePast15CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value " ::= { pm1004dcpPerfLinePast15CntEntry 9 } pm1004dcpPerfLinePast15CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid " ::= { pm1004dcpPerfLinePast15CntEntry 10 } pm1004dcpPerfLinePast15CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value " ::= { pm1004dcpPerfLinePast15CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfLineCurrent24Cnt articles --- ********************************************************* pm1004dcpPerfLineCurrent24CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfLineCurrent24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfLineCurrent24Cnt Article " ::= { pm1004dcpMonLinePerformance 130 } pm1004dcpPerfLineCurrent24CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfLineCurrent24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfLineCurrent24Cnt table " INDEX { pm1004dcpPerfLineCurrent24CntIndex } ::= { pm1004dcpPerfLineCurrent24CntTable 1 } Pm1004dcpPerfLineCurrent24CntEntry ::= SEQUENCE { pm1004dcpPerfLineCurrent24CntIndex INTEGER, pm1004dcpPerfLineCurrent24CntInvCvPortn EkiOnOff, pm1004dcpPerfLineCurrent24CntCvValuePortn Unsigned32, pm1004dcpPerfLineCurrent24CntInvEsPortn EkiOnOff, pm1004dcpPerfLineCurrent24CntEsValuePortn Unsigned32, pm1004dcpPerfLineCurrent24CntInvSesPortn EkiOnOff, pm1004dcpPerfLineCurrent24CntSesValuePortn Unsigned32, pm1004dcpPerfLineCurrent24CntInvSefsPortn EkiOnOff, pm1004dcpPerfLineCurrent24CntSefsValuePortn Unsigned32, pm1004dcpPerfLineCurrent24CntInvUasPortn EkiOnOff, pm1004dcpPerfLineCurrent24CntUasValuePortn Unsigned32 } pm1004dcpPerfLineCurrent24CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfLineCurrent24Cnt table " ::= { pm1004dcpPerfLineCurrent24CntEntry 1 } pm1004dcpPerfLineCurrent24CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid " ::= { pm1004dcpPerfLineCurrent24CntEntry 2 } pm1004dcpPerfLineCurrent24CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value " ::= { pm1004dcpPerfLineCurrent24CntEntry 3 } pm1004dcpPerfLineCurrent24CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid " ::= { pm1004dcpPerfLineCurrent24CntEntry 4 } pm1004dcpPerfLineCurrent24CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value " ::= { pm1004dcpPerfLineCurrent24CntEntry 5 } pm1004dcpPerfLineCurrent24CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid " ::= { pm1004dcpPerfLineCurrent24CntEntry 6 } pm1004dcpPerfLineCurrent24CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value " ::= { pm1004dcpPerfLineCurrent24CntEntry 7 } pm1004dcpPerfLineCurrent24CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfLineCurrent24CntEntry 8 } pm1004dcpPerfLineCurrent24CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value " ::= { pm1004dcpPerfLineCurrent24CntEntry 9 } pm1004dcpPerfLineCurrent24CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid " ::= { pm1004dcpPerfLineCurrent24CntEntry 10 } pm1004dcpPerfLineCurrent24CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value " ::= { pm1004dcpPerfLineCurrent24CntEntry 11 } --- ********************************************************* --- TABLE for the pm1004dcpPerfLinePast24Cnt articles --- ********************************************************* pm1004dcpPerfLinePast24CntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpPerfLinePast24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004dcpPerfLinePast24Cnt Article " ::= { pm1004dcpMonLinePerformance 131 } pm1004dcpPerfLinePast24CntEntry OBJECT-TYPE SYNTAX Pm1004dcpPerfLinePast24CntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004dcpPerfLinePast24Cnt table " INDEX { pm1004dcpPerfLinePast24CntIndex } ::= { pm1004dcpPerfLinePast24CntTable 1 } Pm1004dcpPerfLinePast24CntEntry ::= SEQUENCE { pm1004dcpPerfLinePast24CntIndex INTEGER, pm1004dcpPerfLinePast24CntInvCvPortn EkiOnOff, pm1004dcpPerfLinePast24CntCvValuePortn Unsigned32, pm1004dcpPerfLinePast24CntInvEsPortn EkiOnOff, pm1004dcpPerfLinePast24CntEsValuePortn Unsigned32, pm1004dcpPerfLinePast24CntInvSesPortn EkiOnOff, pm1004dcpPerfLinePast24CntSesValuePortn Unsigned32, pm1004dcpPerfLinePast24CntInvSefsPortn EkiOnOff, pm1004dcpPerfLinePast24CntSefsValuePortn Unsigned32, pm1004dcpPerfLinePast24CntInvUasPortn EkiOnOff, pm1004dcpPerfLinePast24CntUasValuePortn Unsigned32 } pm1004dcpPerfLinePast24CntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004dcpPerfLinePast24Cnt table " ::= { pm1004dcpPerfLinePast24CntEntry 1 } pm1004dcpPerfLinePast24CntInvCvPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid " ::= { pm1004dcpPerfLinePast24CntEntry 2 } pm1004dcpPerfLinePast24CntCvValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value " ::= { pm1004dcpPerfLinePast24CntEntry 3 } pm1004dcpPerfLinePast24CntInvEsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid " ::= { pm1004dcpPerfLinePast24CntEntry 4 } pm1004dcpPerfLinePast24CntEsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value " ::= { pm1004dcpPerfLinePast24CntEntry 5 } pm1004dcpPerfLinePast24CntInvSesPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid " ::= { pm1004dcpPerfLinePast24CntEntry 6 } pm1004dcpPerfLinePast24CntSesValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value " ::= { pm1004dcpPerfLinePast24CntEntry 7 } pm1004dcpPerfLinePast24CntInvSefsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid " ::= { pm1004dcpPerfLinePast24CntEntry 8 } pm1004dcpPerfLinePast24CntSefsValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value " ::= { pm1004dcpPerfLinePast24CntEntry 9 } pm1004dcpPerfLinePast24CntInvUasPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid " ::= { pm1004dcpPerfLinePast24CntEntry 10 } pm1004dcpPerfLinePast24CntUasValuePortn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value " ::= { pm1004dcpPerfLinePast24CntEntry 11 } pm1004dcpPerfEnable OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Perf. Mon. Enable :This OID enables the Performance Monitoring application " ::= { pm1004dcpMonSync 257 } pm1004dcpPerfSyncSource OBJECT-TYPE SYNTAX EkiSynchroMode MAX-ACCESS read-write STATUS current DESCRIPTION " Perf. Mon. Sync. Source :This OID selects the Synchronisation source for the Performance Monitoring application (internal of external) " ::= { pm1004dcpMonSync 258 } pm1004dcpPerf15minSync OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command " ::= { pm1004dcpMonSync 259 } pm1004dcpPerf24hSync OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command " ::= { pm1004dcpMonSync 260 } pm1004dcpPerfCurrent15MinElapsedTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION " Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period " ::= { pm1004dcpMonTimeStamp 5 } pm1004dcpPerfCurrent24HoursElapsedTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION " Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period " ::= { pm1004dcpMonTimeStamp 6 } pm1004dcpPerfPast15MinElapsedTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION " Past 15min period Elapsed Time :This OID gives the number of seconds elapsed in the past 15-minutes period " ::= { pm1004dcpMonTimeStamp 7 } pm1004dcpPerfPast24HoursElapsedTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION " Past 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the past 24-hours period " ::= { pm1004dcpMonTimeStamp 8 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- DOWNLOAD --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the restartProcess article --- ***************************************************** pm1004dcpDwlrestartProcess OBJECT IDENTIFIER ::= { pm1004dcpDwlOther 0 } pm1004dcpDwlColdRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Cold Restart :This OID indicates that the module last restart was a Cold RESTART " ::= { pm1004dcpDwlrestartProcess 2 } pm1004dcpDwlWarmRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warm Restart :This OID indicates that the module last restart was a Warm RESTART " ::= { pm1004dcpDwlrestartProcess 1 } --- ***************************************************** --- LEAF for the swBanksUsed article --- ***************************************************** pm1004dcpDwlswBanksUsed OBJECT IDENTIFIER ::= { pm1004dcpDwlOther 1 } pm1004dcpDwlSwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 This status indicates if the SW bank 2 contains SW package " ::= { pm1004dcpDwlswBanksUsed 6 } pm1004dcpDwlSwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 This status indicates if the SW bank 1 contains SW package " ::= { pm1004dcpDwlswBanksUsed 5 } pm1004dcpDwlSwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 active :This OID indicates the module is working on SW bank 2 This status indicates if the SW bank 2 is active or standby " ::= { pm1004dcpDwlswBanksUsed 2 } pm1004dcpDwlSwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 active :This OID indicates the module is working on SW bank 1 This status indicates if the SW bank 1 is active or standby " ::= { pm1004dcpDwlswBanksUsed 1 } --- ***************************************************** --- LEAF for the gwBanksUsed article --- ***************************************************** pm1004dcpDwlgwBanksUsed OBJECT IDENTIFIER ::= { pm1004dcpDwlOther 2 } pm1004dcpDwlGwBank4Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 " ::= { pm1004dcpDwlgwBanksUsed 8 } pm1004dcpDwlGwBank3Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 This status indicates if the GW bank 3 contains GW package " ::= { pm1004dcpDwlgwBanksUsed 7 } pm1004dcpDwlGwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 " ::= { pm1004dcpDwlgwBanksUsed 6 } pm1004dcpDwlGwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 This status indicates if the GW bank 1 contains GW package " ::= { pm1004dcpDwlgwBanksUsed 5 } pm1004dcpDwlGwBank4Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 active :This OID indicates the module is working on GW bank 4 " ::= { pm1004dcpDwlgwBanksUsed 4 } pm1004dcpDwlGwBank3Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 active :This OID indicates the module is working on GW bank 3 This status indicates if the GW bank 3 is active or standby " ::= { pm1004dcpDwlgwBanksUsed 3 } pm1004dcpDwlGwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 active :This OID indicates the module is working on GW bank 2 " ::= { pm1004dcpDwlgwBanksUsed 2 } pm1004dcpDwlGwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 active :This OID indicates the module is working on GW bank 1 This status indicates if the GW bank 1 is active or standby " ::= { pm1004dcpDwlgwBanksUsed 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group accessCAisCsf --- ***************************************************** pm1004dcpCfgAccessCAisCsf OBJECT IDENTIFIER ::= { pm1004dcpConfig 1 } --- ***************************************************** --- LEAF for the table 0012 --- ***************************************************** pm1004dcpCfgClientcaiscsfTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgAccessCAisCsf 1 } pm1004dcpCfgClientcaiscsfEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the accessCAisCsf table " INDEX { pm1004dcpCfgClientcaiscsfIndex } ::= { pm1004dcpCfgClientcaiscsfTable 1 } Pm1004dcpCfgClientcaiscsfEntry ::= SEQUENCE { pm1004dcpCfgClientcaiscsfIndex INTEGER, pm1004dcpCfgCAisModePortn Unsigned32, pm1004dcpCfgUpAccessioAlmPortn Unsigned32, pm1004dcpCfgUpMapperDeAlmPortn Unsigned32, pm1004dcpCfgUpAccessioSdhAlmPortn Unsigned32, pm1004dcpCfgDownAccessioAlmPortn Unsigned32, pm1004dcpCfgDownMapperDeAlmPortn Unsigned32, pm1004dcpCfgDownDfrmAlmPortn Unsigned32, pm1004dcpCfgDownLineSyncAlarmsPortn Unsigned32, pm1004dcpCfgDownAccessioSdhAlmPortn Unsigned32 } pm1004dcpCfgClientcaiscsfIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientcaiscsf table " ::= { pm1004dcpCfgClientcaiscsfEntry 1 } pm1004dcpCfgCAisModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition " ::= { pm1004dcpCfgClientcaiscsfEntry 3 } pm1004dcpCfgUpAccessioAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. " ::= { pm1004dcpCfgClientcaiscsfEntry 9 } pm1004dcpCfgUpMapperDeAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. " ::= { pm1004dcpCfgClientcaiscsfEntry 10 } pm1004dcpCfgUpAccessioSdhAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CSF contributors on Client Port :This register selects the contributors of SDH register to upstream CAIS/CSF on Port " ::= { pm1004dcpCfgClientcaiscsfEntry 11 } pm1004dcpCfgDownAccessioAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004dcpCfgClientcaiscsfEntry 17 } pm1004dcpCfgDownMapperDeAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004dcpCfgClientcaiscsfEntry 18 } pm1004dcpCfgDownDfrmAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004dcpCfgClientcaiscsfEntry 19 } pm1004dcpCfgDownLineSyncAlarmsPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004dcpCfgClientcaiscsfEntry 20 } pm1004dcpCfgDownAccessioSdhAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register selects the contributors of SDH register to downstream CAIS/CSF on Port " ::= { pm1004dcpCfgClientcaiscsfEntry 21 } --- ***************************************************** --- LEAF for the table Group startup --- ***************************************************** pm1004dcpCfgStartup OBJECT IDENTIFIER ::= { pm1004dcpConfig 2 } --- ***************************************************** --- LEAF for the table 2111 --- ***************************************************** pm1004dcpCfgClientStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgStartup 1 } pm1004dcpCfgClientStartupEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm1004dcpCfgClientStartupIndex } ::= { pm1004dcpCfgClientStartupTable 1 } Pm1004dcpCfgClientStartupEntry ::= SEQUENCE { pm1004dcpCfgClientStartupIndex INTEGER, pm1004dcpCfgSystConfPortPortn Unsigned32, pm1004dcpCfgNetConfPortPortn Unsigned32, pm1004dcpCfgAdddropConfPortPortn Unsigned32 } pm1004dcpCfgClientStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartup table " ::= { pm1004dcpCfgClientStartupEntry 1 } pm1004dcpCfgSystConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm1004dcpCfgClientStartupEntry 3 } pm1004dcpCfgNetConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Protocol on Client Port :This register configures the default initialisation protocol on the port. " ::= { pm1004dcpCfgClientStartupEntry 4 } pm1004dcpCfgAdddropConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Default Add&Drop mode on Client Port :This register configures the default Add&Drop mode on the port. " ::= { pm1004dcpCfgClientStartupEntry 5 } --- ***************************************************** --- LEAF for the table 2191 --- ***************************************************** pm1004dcptablelineStartup OBJECT IDENTIFIER ::= { pm1004dcpCfgStartup 2 } pm1004dcpCfgsystConfLine1 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. " ::= { pm1004dcptablelineStartup 2 } pm1004dcpCfglineOptions1 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Active Line Port :This register configures the default options on the active line port " ::= { pm1004dcptablelineStartup 5 } pm1004dcpCfgsystConfLine2 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. " ::= { pm1004dcptablelineStartup 6 } pm1004dcpCfglineSelection OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings of active line :This register configures the start up active line. " ::= { pm1004dcptablelineStartup 7 } pm1004dcpCfglineOptions2 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Default Options on Active Line Port :This register configures the default options on the active line port " ::= { pm1004dcptablelineStartup 9 } --- ***************************************************** --- LEAF for the table 21AB --- ***************************************************** pm1004dcpCfgXfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgStartup 3 } pm1004dcpCfgXfpEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm1004dcpCfgXfpIndex } ::= { pm1004dcpCfgXfpTable 1 } Pm1004dcpCfgXfpEntry ::= SEQUENCE { pm1004dcpCfgXfpIndex INTEGER, pm1004dcpCfgSystConfXfpPortn Unsigned32, pm1004dcpCfgDataRateConfXfpPortn Unsigned32 } pm1004dcpCfgXfpIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the xfp table " ::= { pm1004dcpCfgXfpEntry 1 } pm1004dcpCfgSystConfXfpPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on XFP Port :This register configures the default initialisation settings on XFP port. " ::= { pm1004dcpCfgXfpEntry 3 } pm1004dcpCfgDataRateConfXfpPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " :Reserved " ::= { pm1004dcpCfgXfpEntry 4 } --- ***************************************************** --- LEAF for the table Group modPerfConfig --- ***************************************************** pm1004dcpCfgModPerfConfig OBJECT IDENTIFIER ::= { pm1004dcpConfig 3 } --- ***************************************************** --- LEAF for the table 5002 --- ***************************************************** pm1004dcptablemodPerfConfig OBJECT IDENTIFIER ::= { pm1004dcpCfgModPerfConfig 1 } pm1004dcpCfgperfMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " SONET or SDH monitoring mode :This OID defines the line monitoring mode (SONET or SDH mode) " ::= { pm1004dcptablemodPerfConfig 2 } --- ***************************************************** --- LEAF for the table Group j0Client --- ***************************************************** pm1004dcpCfgJ0Client OBJECT IDENTIFIER ::= { pm1004dcpConfig 4 } --- ***************************************************** --- LEAF for the table 0013 --- ***************************************************** pm1004dcpCfgEmptyTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgEmptyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgJ0Client 1 } pm1004dcpCfgEmptyEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgEmptyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the j0Client table " INDEX { pm1004dcpCfgEmptyIndex } ::= { pm1004dcpCfgEmptyTable 1 } Pm1004dcpCfgEmptyEntry ::= SEQUENCE { pm1004dcpCfgEmptyIndex INTEGER, pm1004dcpCfgClientExpectJ0SetupPortn Unsigned32 } pm1004dcpCfgEmptyIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the empty table " ::= { pm1004dcpCfgEmptyEntry 1 } pm1004dcpCfgClientExpectJ0SetupPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Expected Trace Identifier mode :This register configures the Expected Trace Identifier Mode (single byte, 16 bytes with CRC7, 64 bytes with CRC7 or 64 bytes with CR/LF terminaison) " ::= { pm1004dcpCfgEmptyEntry 3 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pm1004dcpCfgLabels OBJECT IDENTIFIER ::= { pm1004dcpConfig 5 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm1004dcpCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgLabels 1 } pm1004dcpCfgLabelclientEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm1004dcpCfgLabelclientIndex } ::= { pm1004dcpCfgLabelclientTable 1 } Pm1004dcpCfgLabelclientEntry ::= SEQUENCE { pm1004dcpCfgLabelclientIndex INTEGER, pm1004dcpCfgLabelclientPortn DisplayString } pm1004dcpCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pm1004dcpCfgLabelclientEntry 1 } pm1004dcpCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pm1004dcpCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm1004dcpCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgLabels 2 } pm1004dcpCfgLabellineEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm1004dcpCfgLabellineIndex } ::= { pm1004dcpCfgLabellineTable 1 } Pm1004dcpCfgLabellineEntry ::= SEQUENCE { pm1004dcpCfgLabellineIndex INTEGER, pm1004dcpCfgLabellinePortn DisplayString } pm1004dcpCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pm1004dcpCfgLabellineEntry 1 } pm1004dcpCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pm1004dcpCfgLabellineEntry 3 } --- ***************************************************** --- LEAF for the table Group startuptlh --- ***************************************************** pm1004dcpCfgStartuptlh OBJECT IDENTIFIER ::= { pm1004dcpConfig 6 } --- ***************************************************** --- LEAF for the table 25A8 --- ***************************************************** pm1004dcpCfgOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgStartuptlh 1 } pm1004dcpCfgOtxtlhEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptlh table " INDEX { pm1004dcpCfgOtxtlhIndex } ::= { pm1004dcpCfgOtxtlhTable 1 } Pm1004dcpCfgOtxtlhEntry ::= SEQUENCE { pm1004dcpCfgOtxtlhIndex INTEGER, pm1004dcpCfgNuPortn Unsigned32, pm1004dcpCfgLineDitherRatePortn Unsigned32, pm1004dcpCfgLineDitherFhzPortn Unsigned32, pm1004dcpCfgLinePwrLaserPortn Unsigned32, pm1004dcpCfgLineFCurrentPortn Unsigned32, pm1004dcpCfgLineGridCurrentPortn Unsigned32, pm1004dcpCfgFPortn Unsigned32, pm1004dcpCfgReservedPortn Unsigned32, pm1004dcpCfgLinePhotodiodeModePortn Unsigned32, pm1004dcpCfgLinePhotodiodeValuePortn Unsigned32 } pm1004dcpCfgOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlh table " ::= { pm1004dcpCfgOtxtlhEntry 1 } pm1004dcpCfgNuPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " : " ::= { pm1004dcpCfgOtxtlhEntry 3 } pm1004dcpCfgLineDitherRatePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 4 } pm1004dcpCfgLineDitherFhzPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 5 } pm1004dcpCfgLinePwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) " ::= { pm1004dcpCfgOtxtlhEntry 6 } pm1004dcpCfgLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 7 } pm1004dcpCfgLineGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 8 } pm1004dcpCfgFPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 9 } pm1004dcpCfgReservedPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " : " ::= { pm1004dcpCfgOtxtlhEntry 10 } pm1004dcpCfgLinePhotodiodeModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 11 } pm1004dcpCfgLinePhotodiodeValuePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH " ::= { pm1004dcpCfgOtxtlhEntry 12 } --- ***************************************************** --- LEAF for the table Group other --- ***************************************************** pm1004dcpCfgOther OBJECT IDENTIFIER ::= { pm1004dcpConfig 7 } --- ***************************************************** --- LEAF for the table 2300 --- ***************************************************** pm1004dcptablemoduleOther OBJECT IDENTIFIER ::= { pm1004dcpCfgOther 1 } pm1004dcpCfgmode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the DCC configuration of the PM " ::= { pm1004dcptablemoduleOther 2 } pm1004dcpCfgadddropTsPairMode1 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on TS Group Mode :This register selects selects the mode on the group of clients " ::= { pm1004dcptablemoduleOther 3 } pm1004dcpCfgadddropTsPairMode2 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on TS Group Mode :This register selects selects the mode on the group of clients " ::= { pm1004dcptablemoduleOther 4 } pm1004dcpCfgadddropTsPairMode3 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on TS Group Mode :This register selects selects the mode on the group of clients " ::= { pm1004dcptablemoduleOther 5 } pm1004dcpCfgadddropTsPairMode4 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on TS Group Mode :This register selects selects the mode on the group of clients " ::= { pm1004dcptablemoduleOther 6 } --- ***************************************************** --- LEAF for the table Group startuptablefive --- ***************************************************** pm1004dcpCfgStartuptablefive OBJECT IDENTIFIER ::= { pm1004dcpConfig 8 } --- ***************************************************** --- LEAF for the table 0005 --- ***************************************************** pm1004dcpCfgOtxtlhcapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004dcpCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004dcpCfgStartuptablefive 1 } pm1004dcpCfgOtxtlhcapabilitiesEntry OBJECT-TYPE SYNTAX Pm1004dcpCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptablefive table " INDEX { pm1004dcpCfgOtxtlhcapabilitiesIndex } ::= { pm1004dcpCfgOtxtlhcapabilitiesTable 1 } Pm1004dcpCfgOtxtlhcapabilitiesEntry ::= SEQUENCE { pm1004dcpCfgOtxtlhcapabilitiesIndex INTEGER, pm1004dcpCfgComponentTypePortn Unsigned32, pm1004dcpCfgMiscellaneousPortn Unsigned32, pm1004dcpCfgFirstChannelPortn Unsigned32, pm1004dcpCfgLastChannelPortn Unsigned32, pm1004dcpCfgGridPortn Unsigned32 } pm1004dcpCfgOtxtlhcapabilitiesIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlhcapabilities table " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 1 } pm1004dcpCfgComponentTypePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Component parameters :This OID defines the component parameters " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 3 } pm1004dcpCfgMiscellaneousPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Miscellaneous default settings :This OID defines the miscellaneous parameters " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 4 } pm1004dcpCfgFirstChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Number of the first channel of the component :This OID defines the first channel number of the PM " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 5 } pm1004dcpCfgLastChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Number of the last channel of the component :This OID defines the last channel number of the PM " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 6 } pm1004dcpCfgGridPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Grid value of the component :This OID defines the grid of the PM " ::= { pm1004dcpCfgOtxtlhcapabilitiesEntry 7 } pm1004dcpCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pm1004dcpConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pm1004dcptrapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pm1004dcptraps 2 } pm1004dcptrapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pm1004dcptraps 3 } pm1004dcptrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pm1004dcptraps 4 } --- ***************************************************** --- LINE TRAPS --- ***************************************************** pm1004dcpLineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineDdmWarningPortn, pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Not urgent Line default is activated" ::= { pm1004dcptraps 30 } pm1004dcpLineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineDdmWarningPortn, pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Not urgent Line default disappeared" ::= { pm1004dcptraps 31 } pm1004dcpLineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineDdmAlmPortn, pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent Line default is activated" ::= { pm1004dcptraps 32 } pm1004dcpLineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineDdmAlmPortn, pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent Line default disappeared" ::= { pm1004dcptraps 33 } pm1004dcpLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineFailPortn , pm1004dcpAlmLineHwFailPortn , pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Critical Line default is activated" ::= { pm1004dcptraps 34 } pm1004dcpLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmLineFailPortn , pm1004dcpAlmLineHwFailPortn , pm1004dcptrapLineNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Critical Line default disappeared" ::= { pm1004dcptraps 35 } --- ***************************************************** --- CLIENT TRAPS --- ***************************************************** pm1004dcpClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmSfpDdmWarningPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Not urgent client default is activated" ::= { pm1004dcptraps 40 } pm1004dcpClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmSfpDdmWarningPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Not urgent client default disappeared" ::= { pm1004dcptraps 41 } pm1004dcpClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmSfpDdmAlmPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent client default is activated" ::= { pm1004dcptraps 42 } pm1004dcpClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmSfpDdmAlmPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent client default disappeared" ::= { pm1004dcptraps 43 } pm1004dcpClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmFailAccPortn, pm1004dcpAlmHwFailAccPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Critical client default is activated" ::= { pm1004dcptraps 44 } pm1004dcpClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmFailAccPortn, pm1004dcpAlmHwFailAccPortn, pm1004dcptrapPortNumber, pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Critical client default disappeared" ::= { pm1004dcptraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pm1004dcpPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmDefFuseB, pm1004dcpAlmDefFuseA , pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent power supply default is activated" ::= { pm1004dcptraps 50 } pm1004dcpPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004dcpAlmDefFuseB, pm1004dcpAlmDefFuseA , pm1004dcptrapBoardNumber} STATUS current DESCRIPTION "Urgent power supply default disappeared" ::= { pm1004dcptraps 51 } END