-- *****************************************************************
-- LOOP-PROTECTION-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-LOOP-PROTECTION-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    ME1200InterfaceIndex FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    Unsigned32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200LoopProtectionMib MODULE-IDENTITY
    LAST-UPDATED "201604270000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private MIB for loop protection"
    REVISION    "201604270000Z"
    DESCRIPTION
        "Add loop detected notification"
    REVISION    "201403110000Z"
    DESCRIPTION
        "Definition of type InterfaceIndex changed from Unsigned32 to Integer32
         as it is used as index in some tables"
    REVISION    "201402100000Z"
    DESCRIPTION
        "Removed empty capabilities OID"
    REVISION    "201401290000Z"
    DESCRIPTION
        "Locate all objects under ciscoME1200MIB"
    REVISION    "201401270000Z"
    DESCRIPTION
        "Rearrange interface hierachies"
    REVISION    "201401240000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 91 }


ME1200LoopProtectionAction ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the available actions for when a loop on an
         interface is detected."
    SYNTAX      INTEGER { shutdown(0), shutdownAndLogEvent(1), logEvent(2) }

me1200LoopProtectionObjects OBJECT IDENTIFIER
    ::= { me1200LoopProtectionMib 1 }

me1200LoopProtectionConfig OBJECT IDENTIFIER
    ::= { me1200LoopProtectionObjects 2 }

me1200LoopProtectionGlobals OBJECT IDENTIFIER
    ::= { me1200LoopProtectionConfig 1 }

me1200LoopProtectionGlobalsEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Global enabled for loop protection on any port."
    ::= { me1200LoopProtectionGlobals 1 }

me1200LoopProtectionGlobalsTransmitInterval OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Port transmission interval (seconds). Valid range: 1-10 seconds."
    ::= { me1200LoopProtectionGlobals 2 }

me1200LoopProtectionGlobalsShutdownPeriod OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Port shutdown period (seconds). Valid range: 0 to 604800 seconds."
    ::= { me1200LoopProtectionGlobals 3 }

me1200LoopProtectionConfigInterface OBJECT IDENTIFIER
    ::= { me1200LoopProtectionConfig 2 }

me1200LoopProtectionInterfaceParamTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LoopProtectionInterfaceParamEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of loop protection interface parameters"
    ::= { me1200LoopProtectionConfigInterface 1 }

me1200LoopProtectionInterfaceParamEntry OBJECT-TYPE
    SYNTAX      ME1200LoopProtectionInterfaceParamEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each physical interface has a set of parameters"
    INDEX       { me1200LoopProtectionInterfaceParamIfIndex }
    ::= { me1200LoopProtectionInterfaceParamTable 1 }

ME1200LoopProtectionInterfaceParamEntry ::= SEQUENCE {
    me1200LoopProtectionInterfaceParamIfIndex     ME1200InterfaceIndex,
    me1200LoopProtectionInterfaceParamEnabled     TruthValue,
    me1200LoopProtectionInterfaceParamAction      ME1200LoopProtectionAction,
    me1200LoopProtectionInterfaceParamTransmit    TruthValue
}

me1200LoopProtectionInterfaceParamIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LoopProtectionInterfaceParamEntry 1 }

me1200LoopProtectionInterfaceParamEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enabled loop protection on port"
    ::= { me1200LoopProtectionInterfaceParamEntry 2 }

me1200LoopProtectionInterfaceParamAction OBJECT-TYPE
    SYNTAX      ME1200LoopProtectionAction
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action if loop detected"
    ::= { me1200LoopProtectionInterfaceParamEntry 3 }

me1200LoopProtectionInterfaceParamTransmit OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Actively generate PDUs"
    ::= { me1200LoopProtectionInterfaceParamEntry 4 }

me1200LoopProtectionStatus OBJECT IDENTIFIER
    ::= { me1200LoopProtectionObjects 3 }

me1200LoopProtectionStatusInterface OBJECT IDENTIFIER
    ::= { me1200LoopProtectionStatus 2 }

me1200LoopProtectionInterfaceStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LoopProtectionInterfaceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of loop protection interface status"
    ::= { me1200LoopProtectionStatusInterface 1 }

me1200LoopProtectionInterfaceStatusEntry OBJECT-TYPE
    SYNTAX      ME1200LoopProtectionInterfaceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each physical interface has a set of status objects"
    INDEX       { me1200LoopProtectionInterfaceStatusIfIndex }
    ::= { me1200LoopProtectionInterfaceStatusTable 1 }

ME1200LoopProtectionInterfaceStatusEntry ::= SEQUENCE {
    me1200LoopProtectionInterfaceStatusIfIndex    ME1200InterfaceIndex,
    me1200LoopProtectionInterfaceStatusDisabled   TruthValue,
    me1200LoopProtectionInterfaceStatusLoopDetected   TruthValue,
    me1200LoopProtectionInterfaceStatusLoopCount      Unsigned32,
    me1200LoopProtectionInterfaceStatusLastLoop   Integer32
}

me1200LoopProtectionInterfaceStatusIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LoopProtectionInterfaceStatusEntry 1 }

me1200LoopProtectionInterfaceStatusDisabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Whether a port is currently disabled"
    ::= { me1200LoopProtectionInterfaceStatusEntry 2 }

me1200LoopProtectionInterfaceStatusLoopDetected OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Whether a port has a loop detected"
    ::= { me1200LoopProtectionInterfaceStatusEntry 3 }

me1200LoopProtectionInterfaceStatusLoopCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Number of times a loop has been detected on a port"
    ::= { me1200LoopProtectionInterfaceStatusEntry 4 }

me1200LoopProtectionInterfaceStatusLastLoop OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time of last loop condition"
    ::= { me1200LoopProtectionInterfaceStatusEntry 5 }

me1200LoopProtectionNotificationPrefix OBJECT IDENTIFIER
    ::= { me1200LoopProtectionObjects 4 }

me1200LoopProtectionNotification OBJECT IDENTIFIER
    ::= { me1200LoopProtectionNotificationPrefix 0 }

me1200LoopProtectionNotificationLoopDetected NOTIFICATION-TYPE
    OBJECTS { me1200LoopProtectionInterfaceStatusLoopCount,
              me1200LoopProtectionInterfaceStatusLastLoop }
    STATUS        current
    DESCRIPTION
            "Notification is sent when a loop is detected."
   ::= { me1200LoopProtectionNotification 1 }

me1200LoopProtectionMibConformance OBJECT IDENTIFIER
    ::= { me1200LoopProtectionMib 2 }

me1200LoopProtectionMibCompliances OBJECT IDENTIFIER
    ::= { me1200LoopProtectionMibConformance 1 }

me1200LoopProtectionMibGroups OBJECT IDENTIFIER
    ::= { me1200LoopProtectionMibConformance 2 }

me1200LoopProtectionGlobalsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LoopProtectionGlobalsEnabled, 
                  me1200LoopProtectionGlobalsTransmitInterval, 
                  me1200LoopProtectionGlobalsShutdownPeriod }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LoopProtectionMibGroups 1 }

me1200LoopProtectionInterfaceParamTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LoopProtectionInterfaceParamEnabled, 
                  me1200LoopProtectionInterfaceParamAction, 
                  me1200LoopProtectionInterfaceParamTransmit }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LoopProtectionMibGroups 2 }

me1200LoopProtectionInterfaceStatusTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LoopProtectionInterfaceStatusDisabled, 
                  me1200LoopProtectionInterfaceStatusLoopDetected, 
                  me1200LoopProtectionInterfaceStatusLoopCount, 
                  me1200LoopProtectionInterfaceStatusLastLoop }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LoopProtectionMibGroups 3 }

me1200LoopProtectionNotificationInfoGroup NOTIFICATION-GROUP
    NOTIFICATIONS { me1200LoopProtectionNotificationLoopDetected }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LoopProtectionMibGroups 4 }

me1200LoopProtectionMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200LoopProtectionGlobalsInfoGroup, 
                  me1200LoopProtectionInterfaceParamTableInfoGroup, 
                  me1200LoopProtectionInterfaceStatusTableInfoGroup,
                  me1200LoopProtectionNotificationInfoGroup }

    ::= { me1200LoopProtectionMibCompliances 1 }

END