-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00 --------------------------------------------------------------------------- -- (C)opyright 2004-2014 bintec elmeg GmbH -- $RCSfile: mib-admin,v $ -- $Revision: 1.17 $ -- $Date: 2014-02-07 10:37:49 $ -- Author: stefans --------------------------------------------------------------------------- BINTEC-ADMIN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32, Counter64, IpAddress, TimeTicks, mib-2, enterprises FROM SNMPv2-SMI DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Date, admin-2 FROM BINTEC-MIB; -- This MIB file contains various administration MIBs -- group snmp: snmpAdmin -- group administration: httpAdmin, httpAdminStat -- --------------------------------------------------------------------------- -- snmpAdmin MIB snmpAdminMIB MODULE-IDENTITY LAST-UPDATED "201301120000Z" ORGANIZATION "bintec elmeg GmbH" CONTACT-INFO "EMail: info@bintec-elmeg.com Web: www.bintec-elmeg.com " DESCRIPTION "The MIB module for administration entities. " REVISION "200606290000Z" DESCRIPTION "Initial version." ::= { admin-2 3 } httpAdminMIB OBJECT IDENTIFIER ::= { admin-2 5 } --------------------------------------------------------------------------- -- start: snmpAdmin -- SNMP agent configuration snmpAdmin OBJECT IDENTIFIER ::= { snmpAdminMIB 1 } http OBJECT IDENTIFIER ::= { snmpAdminMIB 2 } snmpAdminVersion OBJECT-TYPE SYNTAX BITS { v1(0), v2c(1), v3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This bitfield enables the active SNMP versions: v1 : SNMP V1 v2c : SNMP V2c (community, like v1 but with Counter64) v3 : SNMP V3 ." DEFVAL { { v1, v2c, v3 } } ::= { snmpAdmin 1 } snmpAdminPort OBJECT-TYPE SYNTAX INTEGER (0 .. 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP listen port." DEFVAL { 161 } ::= { snmpAdmin 2 } snmpAdminTrapPort OBJECT-TYPE SYNTAX INTEGER (0 .. 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP trap port." DEFVAL { 162 } ::= { snmpAdmin 3 } snmpAdminTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Community name for sending traps." DEFVAL { "snmp-Trap" } ::= { snmpAdmin 4 } snmpAdminTrapBrdCast OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable trap broadcasting." DEFVAL { off } ::= { snmpAdmin 5 } snmpAdminPrivIndex OBJECT-TYPE SYNTAX INTEGER { auto(1), auto-nopriv(2), always(3), never(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This enables or disables the handling of the private OID part (.i): auto : the private OID part is appended automatically - depending on community name the private OID part is appended, if: - the community is appended with '+i' or with '' the private OID part is not appended, if: - the community is appended with '-i' the default is to append the private OID index auto_nopriv: the private OID part is appended automatically like 'auto', but the default is not to add the index both auto settings consider special marked tables (STDINDEX, EXTINDEX) always : the private OID part is always appended (this was the default on former version) never : the private OID part is never appended Usually the OIDs have the format: .1.3.6.x.x .y.y .i .1.3.6.x.x: is the constant part of the OID of the variable specified in MIB-source .y.y : is the specific part of the OID to identify exactly a row. It is the content of all index variables. .i : is a consecutively incremented index number, to distinguish rows with identical index variables " DEFVAL { auto } ::= { snmpAdmin 6 } snmpAdminGetOrder OBJECT-TYPE SYNTAX INTEGER { normal(1), sorted(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This the handling of the private OID part (.i): normal : the GetNext returns the next object like stored in internal database. sorted : the GetNext return the next object sorted according to the index values (RFC-1157) " DEFVAL { normal } ::= { snmpAdmin 7 } snmpAdminLinkTrapEvent OBJECT-TYPE SYNTAX INTEGER { none(1), any(2), up(3), down(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap: none : disable linkUp/linkDown trap generation. any : enable bintec like trap generation. - entering the up state generates a up trap - any other state change generates a down trap up : enable rfc1157 like trap generation. - entering the up state generates a up trap - leaving the up state generates a down trap down : enable rfc2233 like trap generation. - leaving the down state generates a up trap - entering the down state generates a down trap Seven parameters are sent in each linkUp/linkDown trap pdu: 1. ifEntry.ifIndex (mandatory for linkUp/Down traps) 2. ifEntry.ifDescr 3. ifEntry.ifType 4. ifEntry.ifAdminStatus 5. ifEntry.ifOperStatus 6. system.Description 7. system.Name " DEFVAL { up } ::= { snmpAdmin 8 } snmpAdminMcDiscovery OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines whether Multicast SNMP discovery is enabled or not." DEFVAL { enabled } ::= { snmpAdmin 9 } -- end: snmpAdmin --------------------------------------------------------------------------- -- httpAdmin --------------------------------------------------------------------------- httpAdmin OBJECT IDENTIFIER ::= { httpAdminMIB 1 } -- httpAdminPort OBJECT-TYPE -- SYNTAX INTEGER (0 .. 65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "HTTP server port." -- DEFVAL { 80 } -- ::= { httpAdmin 1 } httpAdminSPort OBJECT-TYPE SYNTAX INTEGER (0 .. 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "HTTPS server port." DEFVAL { 443 } ::= { httpAdmin 2 } httpAdminTimeout OBJECT-TYPE SYNTAX INTEGER (30 .. 3600) MAX-ACCESS read-write STATUS current DESCRIPTION "HTTP server timeout in seconds." DEFVAL { 300 } ::= { httpAdmin 3 } httpAdminKeepAlive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow persistent connections (more than one request per connection) true : allowed false: not allowed " DEFVAL { true } ::= { httpAdmin 4 } httpAdminKeepAliveTimeout OBJECT-TYPE SYNTAX INTEGER (5 .. 60) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of seconds to wait for the next request from the same client on the same connection. " DEFVAL { 15 } ::= { httpAdmin 5 } httpAdminMaxKeepAliveRequests OBJECT-TYPE SYNTAX INTEGER (0 .. 10000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of requests to allow during a persistent connection. Set to 0 to allow an unlimited amount. We recommend you leave this number high, for maximum performance. " DEFVAL { 100 } ::= { httpAdmin 6 } httpAdminSessionTimeout OBJECT-TYPE SYNTAX INTEGER (300 .. 86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds until a session is timed out on inactivity. " DEFVAL { 5000 } ::= { httpAdmin 7 } httpAdminLoginMaxFailed OBJECT-TYPE SYNTAX INTEGER (0 .. 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of failed HTTP session (wrong authentication), that causes the next session with delayed acceptance. " DEFVAL { 3 } ::= { httpAdmin 8 } httpAdminLoginFailedDelay OBJECT-TYPE SYNTAX INTEGER (3 .. 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds a new session is delayed (not accepted) if httpAdminLoginMaxFailed was reached. " DEFVAL { 7 } ::= { httpAdmin 9 } httpAdminMaxSessions OBJECT-TYPE SYNTAX INTEGER (1 .. 1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of HTTP(S)-sessions allowed in parallel." ::= { httpAdmin 10 } httpAdminCertIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the certificate to use (from the certTable) for HTTPS sessions. If 0, predefined certificate is used." DEFVAL { 0 } ::= { httpAdmin 11 } httpAdminOspPort OBJECT-TYPE SYNTAX INTEGER (0 .. 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "HTTPS OpenStage server port." DEFVAL { 18443 } ::= { httpAdmin 12 } --------------------------------------------------------------------------- -- httpAdminStat --------------------------------------------------------------------------- httpAdminStat OBJECT IDENTIFIER ::= { httpAdminMIB 2 } httpAdminStatTotSessionsCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of ever opened sessions since system-start. Any write-access causes reset to 0. " ::= { httpAdminStat 1 } httpAdminStatTotSessionsTime OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "The last time when httpAdminStatTotSessionsCnt was set." ::= { httpAdminStat 2 } httpAdminStatCurSessionsCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active sessions." ::= { httpAdminStat 3 } httpAdminStatMaxSessionsCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum observed value of httpAdminStatCurSessionsCnt. Any write-access causes initialisation to current value of httpAdminStatCurSessionsCnt. " ::= { httpAdminStat 4 } httpAdminStatMaxSessionsTime OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "Last time when httpAdminStatMaxSessionsCnt was set." ::= { httpAdminStat 5 } httpAdminStatGlobalRejectCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of rejected sessions since system-start due to global limit. Any write-access causes reset to 0. " ::= { httpAdminStat 6 } httpAdminStatGlobalRejectTime OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "Last time when httpAdminStatGlobalRejectCnt was set." ::= { httpAdminStat 7 } httpAdminStatHostRejectCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of rejected sessions since system-start due to limit per host. Any write-access causes reset to 0. " ::= { httpAdminStat 8 } httpAdminStatHostRejectTime OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "Last time when httpAdminStatHostRejectCnt was set." ::= { httpAdminStat 9 } --------------------------------------------------------------------------- -- httpSessionStatTable --------------------------------------------------------------------------- httpSessionStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HttpSessionStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all registered sessions clients." ::= { http 1 } httpSessionStatEntry OBJECT-TYPE SYNTAX HttpSessionStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { httpSessionIndex } ::= { httpSessionStatTable 1 } HttpSessionStatEntry ::= SEQUENCE { httpSessionIndex Unsigned32, httpSessionState INTEGER, httpSessionStart Date, httpSessionExpiry Date, httpSessionRights BITS, httpSessionUser DisplayString, httpSessionHost DisplayString, httpSessionRemoteAddr IpAddress, httpSessionAccessClass INTEGER } httpSessionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each registerd sessions." ::= { httpSessionStatEntry 1 } httpSessionState OBJECT-TYPE SYNTAX INTEGER { delete(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of HTTP session. As long as a session exists in this table its state is active. Setting the session state to delete will cause this entry to be deleted as well as the related session." DEFVAL { active } ::= { httpSessionStatEntry 2 } httpSessionStart OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp when the session was started" ::= { httpSessionStatEntry 3 } httpSessionExpiry OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp when session will expire. This entry is updated every http request received for this session with current time plus httpAdminSessionTimeout." ::= { httpSessionStatEntry 4 } httpSessionRights OBJECT-TYPE SYNTAX BITS { admin(0), fci(1), maint(2), easp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mask contains session rights of authorized user copied over from respective biboAdmLoginHTTPAccessRights table entry." ::= { httpSessionStatEntry 5 } httpSessionUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the name of the authorized user copied over from the respective biboAdmLogin table entry." ::= { httpSessionStatEntry 6 } httpSessionHost OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Contains host field from HTTP request header." ::= { httpSessionStatEntry 7 } httpSessionRemoteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of client at time of HTTP session initiation. Actually this wouldn't normally change during a session's lifetime but also wouldn't get updated if so." ::= { httpSessionStatEntry 8 } httpSessionAccessClass OBJECT-TYPE SYNTAX INTEGER { user(1), admin(2), service(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Contains HTTP access class of authorized user, copied over from biboAdmLoginHTTPAccessClass of respective biboAdmLogin table entry during session initiaition." ::= { httpSessionStatEntry 9 } END