-- ***************************************************************** -- QTECH-LOG-MIB.mib: Qtech Log MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-LOG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress FROM SNMPv2-SMI DisplayString, DateAndTime, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC EnabledStatus FROM P-BRIDGE-MIB ConfigStatus, IfIndex FROM QTECH-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF qtechMgmt FROM QTECH-SMI; qtechLogMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech event mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 4} qtechLogMIBObjects OBJECT IDENTIFIER ::= { qtechLogMIB 1 } LogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The severity of a log message." SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } LogTimeStamp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The timestamp of a log message." SYNTAX INTEGER { disabled(1), datetime(2), uptime(3) } LogSyslogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The facility of a syslog message." SYNTAX INTEGER { kernel(0), user(1), mail(2), system(3), security(4), syslogd(5), lineprinter(6), network(7), uUCP(8), clockdaemon(9), authorization(10), fTP(11), nTP(12), logaudit(13), logalert(14), clockdaemon2(15), localuse0(16), localuse1(17), localuse2(18), localuse3(19), localuse4(20), localuse5(21), localuse6(22), localuse7(23) } -- -- Log -- qtechLogGlobalStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system logging feature is currently running in the device." DEFVAL { enabled } ::= { qtechLogMIBObjects 1 } qtechLogSendConsoleStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system log will be sent to console(out-band)." DEFVAL { enabled } ::= { qtechLogMIBObjects 2 } qtechLogSendConsoleMaxSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which severity levels system log will be sent to console(out-band). Any system log message with a severity value greater than this value will be ignored by the agent.Setting this value to 0 will prevent any log to send to console." DEFVAL { debug } ::= { qtechLogMIBObjects 3 } qtechLogSendMonitorStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system log will be sent to monitor(telnet)." DEFVAL { disabled } ::= { qtechLogMIBObjects 4 } qtechLogSendMonitorMaxSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which severity levels system log will be sendt to monitor(telnet). Any system log message with a severity value greater than this value will be ignored by the agent.Setting this value to 0 will prevent any log to send to telnet." DEFVAL { debug } ::= { qtechLogMIBObjects 5 } qtechLogSaveFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to a non-null string will save all entries of event log table into file which name is assigned by this value. Setting this value to a null string will not save log to file." DEFVAL { ""} ::= { qtechLogMIBObjects 6 } qtechLogFileMaxSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which severity levels system log will be sent to monitor(telnet). Any system log message with a severity value greater than this value will be ignored by the agent.Setting this value to 0 will prevent any log to send to telnet." DEFVAL { notice } ::= { qtechLogMIBObjects 7 } qtechLogFileMaxSize OBJECT-TYPE SYNTAX Integer32(4096..2000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The size of log file in units of byte." DEFVAL { 4096 } ::= { qtechLogMIBObjects 8 } qtechLogSendBufferStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system log will be sent to buffer for retaining." DEFVAL { enabled } ::= { qtechLogMIBObjects 9 } qtechLogSendBufferMaxSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which severity levels system log will be sendt to monitor(telnet). Any system log message with a severity value greater than this value will be ignored by the agent.Setting this value to 0 will prevent any log to send to telnet." DEFVAL { debug } ::= { qtechLogMIBObjects 10 } qtechLogClearBuffer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It will clear logging buffer to set this object to any value but 0, Set its value to 0 will cause no action of agent, when query always return value 0." ::= { qtechLogMIBObjects 11 } -- -- log history table -- qtechLogHisRecordMaxNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The upper limit on the number of entries that the log history table may contain." ::= { qtechLogMIBObjects 12 } qtechLogHisTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechLogHisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of log history record , and when the table is full the oldest entry will be deleted and a new one will be created." ::= { qtechLogMIBObjects 13 } qtechLogHisEntry OBJECT-TYPE SYNTAX QtechLogHisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry obtains history information of each logging." INDEX { qtechLogHisIndex } ::= { qtechLogHisTable 1 } QtechLogHisEntry ::= SEQUENCE { qtechLogHisIndex Integer32, qtechLogHisSeverity LogSeverity, qtechLogHisMsgName DisplayString , qtechLogHisDescription DisplayString, qtechLogHisTime DateAndTime, qtechLogHisStamps TimeStamp } qtechLogHisIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique vlaue for each log Entry." ::= { qtechLogHisEntry 1 } qtechLogHisSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of the log message." ::= { qtechLogHisEntry 2 } qtechLogHisMsgName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual identification for the log message type. A facility name uniquely identifies a message type." ::= { qtechLogHisEntry 3 } qtechLogHisDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Text description for this log message." ::= { qtechLogHisEntry 4 } qtechLogHisTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time for this message was generated. " ::= { qtechLogHisEntry 5 } qtechLogHisStamps OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The history timestamp that is multipled by 0.01s from the Startup to log print." ::= { qtechLogHisEntry 6 } qtechLogSequenceGlobalStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system log sequence feature is currently running in the device." DEFVAL { disabled } ::= { qtechLogMIBObjects 14 } qtechLogTimeStampGlobalStatus OBJECT-TYPE SYNTAX LogTimeStamp MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system log timestamp date feature is currently running in the device." DEFVAL { datetime } ::= { qtechLogMIBObjects 15} qtechLogSyslogRelayGlobalStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the syslog relay feature is currently running in the device." DEFVAL { disabled } ::= { qtechLogMIBObjects 16 } qtechLogSyslogFacility OBJECT-TYPE SYNTAX LogSyslogFacility MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which Facility value syslog will be sent to syslog server. " DEFVAL { localuse7} ::= { qtechLogMIBObjects 17 } qtechLogSyslogSeverity OBJECT-TYPE SYNTAX LogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which severity levels syslog will be sent to syslog server. Any syslog message with a severity value greater than this value will be ignored." DEFVAL { debug } ::= { qtechLogMIBObjects 18 } qtechLogSyslogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechLogSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the syslog server ." ::= { qtechLogMIBObjects 19 } qtechLogSyslogServerEntry OBJECT-TYPE SYNTAX QtechLogSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry obtains information of each syslog server ." INDEX { qtechLogSyslogServerIpAddr } ::= { qtechLogSyslogServerTable 1 } QtechLogSyslogServerEntry ::= SEQUENCE { qtechLogSyslogServerIpAddr IpAddress, qtechLogSyslogServerIpStatus ConfigStatus } qtechLogSyslogServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A ip address of a syslog server." ::= { qtechLogSyslogServerEntry 1 } qtechLogSyslogServerIpStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-write STATUS current DESCRIPTION "entry status. Setting this value to 'invalid' will remove this server" ::= { qtechLogSyslogServerEntry 2 } qtechLogSyslogSendSrcIfindex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The source ifindex which syslog send ." ::= { qtechLogMIBObjects 20 } qtechLogSyslogSendSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source Ip which syslog send ." ::= { qtechLogMIBObjects 21} qtechLogMIBConformance OBJECT IDENTIFIER ::= { qtechLogMIB 4 } qtechLogMIBCompliances OBJECT IDENTIFIER ::= { qtechLogMIBConformance 1 } qtechLogMIBGroups OBJECT IDENTIFIER ::= { qtechLogMIBConformance 2 } -- compliance statements qtechLogMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Log MIB" MODULE -- this module MANDATORY-GROUPS { qtechLogMIBGroup } GROUP qtechLogHisStampsMIBGroup DESCRIPTION "This group is mandatory when the system has no RTC." ::= { qtechLogMIBCompliances 1 } -- units of conformance qtechLogMIBGroup OBJECT-GROUP OBJECTS { qtechLogGlobalStatus, qtechLogSendConsoleStatus, qtechLogSendConsoleMaxSeverity, qtechLogSendMonitorStatus, qtechLogSendMonitorMaxSeverity, qtechLogSaveFileName, qtechLogFileMaxSeverity, qtechLogFileMaxSize, qtechLogSendBufferStatus, qtechLogSendBufferMaxSeverity, qtechLogClearBuffer, qtechLogHisRecordMaxNum, qtechLogHisIndex, qtechLogHisSeverity, qtechLogHisMsgName, qtechLogHisDescription, qtechLogHisTime, qtechLogSequenceGlobalStatus, qtechLogTimeStampGlobalStatus, qtechLogSyslogRelayGlobalStatus, qtechLogSyslogFacility, qtechLogSyslogSeverity, qtechLogSyslogServerIpAddr, qtechLogSyslogServerIpStatus, qtechLogSyslogSendSrcIfindex, qtechLogSyslogSendSrcIp } STATUS current DESCRIPTION "A collection of objects providing logging to a Qtech agent." ::= { qtechLogMIBGroups 1 } qtechLogHisStampsMIBGroup OBJECT-GROUP OBJECTS { qtechLogHisStamps } STATUS current DESCRIPTION "Collection of log history timestamp." ::= { qtechLogMIBGroups 2 } END