QTECH-GBNDeviceSwitch-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TruthValue,DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnDevice FROM QTECH-MASTER-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB VlanIndex FROM Q-BRIDGE-MIB PortList, dot1qStaticMulticastEntry FROM Q-BRIDGE-MIB; gbnDeviceSwitch MODULE-IDENTITY LAST-UPDATED "0011020000Z" -- November 2, 2000 ORGANIZATION "QTECH LLC" CONTACT-INFO "Basil Budko E-mail: budko@qtech.ru" DESCRIPTION "Gbn Common Enterprise MIB definition." REVISION "0011020000Z" -- November 2, 2000 DESCRIPTION "Initial MIB creation." ::= { gbnDevice 1 } MirrorMacType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "null、destination、source" SYNTAX INTEGER { null(0), destination (1), source(2) } ------------------------------------------------------------------------------ -- define groups in gbnDeviceSwitch-MIB ------------------------------------------------------------------------------ gbnDeviceSwitchMirror OBJECT IDENTIFIER ::= { gbnDeviceSwitch 1 } gbnDeviceSwitchPort OBJECT IDENTIFIER ::= { gbnDeviceSwitch 2 } gbnDeviceSwitchAggregation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 3 } gbnDeviceSwitchL3 OBJECT IDENTIFIER ::= { gbnDeviceSwitch 4 } gbnDeviceSwitchLoopTest OBJECT IDENTIFIER ::= { gbnDeviceSwitch 5 } gbnDeviceSwitchSRM OBJECT IDENTIFIER ::= { gbnDeviceSwitch 6 } gbnDeviceSwitchFlowAlarm OBJECT IDENTIFIER ::= { gbnDeviceSwitch 7 } gbnDeviceSwitchQueneScheduer OBJECT IDENTIFIER ::= { gbnDeviceSwitch 8 } gbnDeviceSwitchLineRate OBJECT IDENTIFIER ::= { gbnDeviceSwitch 9 } gbnDeviceSwitchPortIsolation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 10 } gbnDeviceSwitchStormControl OBJECT IDENTIFIER ::= { gbnDeviceSwitch 11 } gbnDeviceSwitchAntiDos OBJECT IDENTIFIER ::= { gbnDeviceSwitch 12 } gbnDeviceSwitchBandWidth OBJECT IDENTIFIER ::= { gbnDeviceSwitch 13 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchMirror - Mirror Group -- ------------------------------------------------------------------------------ mirroringPort OBJECT-TYPE SYNTAX INTEGER (0..26) MAX-ACCESS read-write STATUS current DESCRIPTION "This port which all packets send to." ::= { gbnDeviceSwitchMirror 1 } mirroredEgrPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The egress ports which need to monitor." ::= { gbnDeviceSwitchMirror 2 } mirroredIgrPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The ingress ports which need to monitor." ::= { gbnDeviceSwitchMirror 3 } ingressMirrorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address which will be compared with the ingress frame, Only the matched frame will be mirrored" --用于匹配ingress报文的MAC地址 ::= { gbnDeviceSwitchMirror 4 } egressMirrorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address which will be compared with the egress frame, Only the matched frame will be mirrored" --用于匹配egress报文的MAC地址 ::= { gbnDeviceSwitchMirror 5 } ingressMirrorMacType OBJECT-TYPE SYNTAX MirrorMacType MAX-ACCESS read-write STATUS current DESCRIPTION "The destination or source MAC address which will be compared with the ingress frame" --指定用于匹配ingress报文的是目的还是源MAC地址 ::= { gbnDeviceSwitchMirror 6 } egressMirrorMacType OBJECT-TYPE SYNTAX MirrorMacType MAX-ACCESS read-write STATUS current DESCRIPTION "The destination or source MAC address which will be compared with the egress frame" --指定用于匹配egress报文的是目的还是源MAC地址 ::= { gbnDeviceSwitchMirror 7 } ingressMirrorDivider OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "the mirror sampling divider" --ingress报文的采样值 ::= { gbnDeviceSwitchMirror 8 } egressMirrorDivider OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "the mirror sampling divider" --egress报文的采样值 ::= { gbnDeviceSwitchMirror 9 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchPort - Port Group -- ------------------------------------------------------------------------------ portTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchPort 1 } portTypeEntry OBJECT-TYPE SYNTAX PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { portNumber } ::= { portTypeTable 1 } PortTypeEntry ::= SEQUENCE { portNumber INTEGER, portType INTEGER } portNumber OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS read-only STATUS current DESCRIPTION "the index of port." ::= { portTypeEntry 1 } portType OBJECT-TYPE SYNTAX INTEGER { blank(1), fE(2), single100FX(3), double100FX(4), single1000FX(5), double1000FX(6), fE1000(7), cpu(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "端口类型:1为不存在；2为10/100M电口；3为100M单模光纤； 4为100M多模光纤；5为1000M单模光纤；6为1000M多模光纤； 7为1000M电口; 8为CPU接口" ::= { portTypeEntry 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchAggregation - Port Trunk Group -- ------------------------------------------------------------------------------ aggTable OBJECT-TYPE SYNTAX SEQUENCE OF AggEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains information about every Aggregator that is associated with this System." ::= { gbnDeviceSwitchAggregation 1 } aggEntry OBJECT-TYPE SYNTAX AggEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator." INDEX { aggUnit, aggPort } ::= { aggTable 1 } AggEntry ::= SEQUENCE { aggUnit INTEGER, aggPort INTEGER, aggPortListPorts PortList, aggRule INTEGER, aggRowstatus RowStatus } aggUnit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The Interface Unit of the Aggregation." ::= { aggEntry 1 } aggPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The MasterPort of the Aggregation." ::= { aggEntry 2 } aggPortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation." ::= { aggEntry 3 } aggRule OBJECT-TYPE SYNTAX INTEGER { srcMAC(1), destMAC(2), srcXORDestMAC(3), srcIP(4), destIP(5), srcXORDestIP(6) } ACCESS read-write STATUS obsolete DESCRIPTION " The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link." ::= { aggEntry 4 } aggRowstatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "rowstatus of trunk." ::= { aggEntry 5 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchL3 - L3 Group -- ------------------------------------------------------------------------------ l3Table OBJECT-TYPE SYNTAX SEQUENCE OF L3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "此表为交换芯片的L3表项内容。" ::= { gbnDeviceSwitchL3 1 } l3Entry OBJECT-TYPE SYNTAX L3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "交换芯片的L3表项，此表为只读。" INDEX { l3IpAddress } ::= { l3Table 1 } L3Entry ::= SEQUENCE { l3IpAddress IpAddress, l3NextHopMacAddress MacAddress, l3Vlan VlanIndex, l3Port INTEGER, l3CreateTime DateAndTime, l3UpdateTime DateAndTime } l3IpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "目的IP地址，作为索引。" ::= { l3Entry 1 } l3NextHopMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "下一跳IP的MAC地址。" ::= { l3Entry 2 } l3Vlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "下一跳IP所在的VLAN。" ::= { l3Entry 3 } l3Port OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "报文的出端口。" ::= { l3Entry 4 } l3CreateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Create Time,such as 2004-07-29,13:30:15.0" ::= { l3Entry 5 } l3UpdateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Update Time,such as 2004-07-29,13:30:15.0" ::= { l3Entry 6 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchLoopTest - Loop Test Group -- ------------------------------------------------------------------------------ loopTestPortno OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of the ports to be tested." ::= { gbnDeviceSwitchLoopTest 1 } loopTestType OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation local(2), -- for both vdsl and ethernet port remote(3), -- for both vdsl and ethernet port other(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 4 } Setting this object to 2-4 enables loop back test. Setting it to 1 disables loop back test." ::= { gbnDeviceSwitchLoopTest 2 } loopTestSuccess OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "List of ports tested successfully." ::= { gbnDeviceSwitchLoopTest 3 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchSRM - SRM Group -- ------------------------------------------------------------------------------ srmHardwareEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add network routes to hardware table or not.Default is enable." -- "是否下发网段路由到硬件表中。默认为下发。" ::= { gbnDeviceSwitchSRM 1 } srmHardwareDEFCPU OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DEF routes goes to CPU." -- "硬件查找失败的路由发送到CPU，此功能只有TiNet S3750支持，默认为disable" ::= { gbnDeviceSwitchSRM 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchFlowAlarm - Port Flow Alarm Group -- ------------------------------------------------------------------------------ portFlowAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF PortFlowAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of port flow alarm." --端口流量告警表 ::= { gbnDeviceSwitchFlowAlarm 1 } portFlowAlarmEntry OBJECT-TYPE SYNTAX PortFlowAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port flow alarm." --端口流量告警列表 INDEX { portFlowAlarmPort } ::= { portFlowAlarmTable 1 } PortFlowAlarmEntry ::= SEQUENCE { portFlowAlarmPort Integer32, portFlowAlarmEnable TruthValue, portFlowAlarmExceedStatus TruthValue, portFlowAlarmExceedThreshold Integer32, portFlowAlarmNormalThreshold Integer32 } portFlowAlarmPort OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number." --端口号，端口流量告警表的索引值 ::= { portFlowAlarmEntry 1 } portFlowAlarmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the port flow alarm" --端口流量告警开启/关闭状态 ::= { portFlowAlarmEntry 2 } portFlowAlarmExceedStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The exceed status of the port flow alarm" --端口流量告警流量状态 ::= { portFlowAlarmEntry 3 } portFlowAlarmExceedThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The exceed threshold of port flow alarm." --端口流量过大的阈值 ::= { portFlowAlarmEntry 4 } portFlowAlarmNormalThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The normal threshold of port flow alarm." --端口流量正常的阈值 ::= { portFlowAlarmEntry 5 } portFlowAlarmGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The global enable status of port flow alarm." --全局端口流量告警开启/关闭状态 ::= { gbnDeviceSwitchFlowAlarm 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchTrap - gbn device switch TRAP -- ------------------------------------------------------------------------------ portFlowAlarmTrap OBJECT IDENTIFIER ::= { gbnDeviceSwitchFlowAlarm 5 } portFlowAlarmExceedTrap NOTIFICATION-TYPE OBJECTS { portFlowAlarmPort } STATUS current DESCRIPTION "Port ingress packet rate become too big, port flow exceed alarm happen." --如果端口进来的报文速率变得过大，则发出端口速率过大的trap ::= { portFlowAlarmTrap 1 } portFlowAlarmNormalTrap NOTIFICATION-TYPE OBJECTS { portFlowAlarmPort } STATUS current DESCRIPTION "Port ingress packet rate become normal, port flow normal alarm happen." --如果端口进来的报文速率恢复正常，则发出端口速率正常的trap ::= { portFlowAlarmTrap 2 } ----------------------------------------------------- -- the quene-scheduer QOS ----------------------------------------------------- qosQueueSchedulerGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchQueneScheduer 1 } qosWrrQueue1Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 1th queue(%)." --队列1的权重 ::= { qosQueueSchedulerGroup 1 } qosWrrQueue2Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 2th queue(%). " --队列2的权重 ::= { qosQueueSchedulerGroup 2 } qosWrrQueue3Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 3th queue(%)." --队列3的权重 ::= { qosQueueSchedulerGroup 3 } qosWrrQueue4Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 4th queue(%)." --队列4的权重 ::= { qosQueueSchedulerGroup 4 } qosWrrMaxDelayValue OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS current DESCRIPTION "the maximum allowable latency for packet transmission on the priorest COS" --队列调度时最高优先级的队列最长等待时间 ::= { qosQueueSchedulerGroup 5 } qosQueueSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority (1), wrr(2), sp-wrr(3) } ACCESS read-write STATUS current DESCRIPTION "queue scheduler mode: strict priority, weighted round robin" --队列调度模式:绝对优先级、加权轮循调度 DEFVAL { strictPriority } ::= { qosQueueSchedulerGroup 6 } qosWrrQueue5Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 5th queue(%)." --队列5的权重 ::= { qosQueueSchedulerGroup 7 } qosWrrQueue6Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 6th queue(%). " --队列6的权重 ::= { qosQueueSchedulerGroup 8 } qosWrrQueue7Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 7th queue(%)." --队列7的权重 ::= { qosQueueSchedulerGroup 9 } qosWrrQueue8Weight OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "Weight of 8th queue(%)." --队列8的权重 ::= { qosQueueSchedulerGroup 10 } ----------------------------------------------------- -- the line-rate configuration ----------------------------------------------------- qosLineRateTable OBJECT-TYPE SYNTAX SEQUENCE OF QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " --端口限速入口表 ::= { gbnDeviceSwitchLineRate 1 } qosLineRateEntry OBJECT-TYPE SYNTAX QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " --端口限速入口 INDEX { qosLineRateInterface } ::= { qosLineRateTable 1 } QosLineRateEntry ::= SEQUENCE { qosLineRateInterface INTEGER, qosLineRateTargetRate INTEGER, qosLineRateRowStatus RowStatus } qosLineRateInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the line rate interface. " --端口限速端口 ::= { qosLineRateEntry 1 } qosLineRateTargetRate OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "the target rate of the line-rate QOS. " --端口限速目标速率 ::= { qosLineRateEntry 2 } ----------------------------------------------------- -- the port-isolation configuration ----------------------------------------------------- portIsolationGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchPortIsolation 1 } portIsolationDownLinkPorts OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS current DESCRIPTION "port isolation down link portlist" -- 端口隔离的下行端口列表 -- ::= { portIsolationGroup 1 } ----------------------------------------------------- -- the storm control ----------------------------------------------------- stormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " --风暴控制入口表 ::= { gbnDeviceSwitchStormControl 1 } stormControlEntry OBJECT-TYPE SYNTAX StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " --风暴控制入口 INDEX { stormControlInterface, stormControlType } ::= { stormControlTable 1 } StormControlEntry ::= SEQUENCE { stormControlInterface INTEGER, stormControlType INTEGER, stormControlTargetRate INTEGER, stormControlRowStatus RowStatus } stormControlInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the storm control interface. " --风暴控制端口 ::= { stormControlEntry 1 } stormControlType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the pack flow type of the storm control. " --风暴控制报文流类型 ::= { stormControlEntry 2 } stormControlTargetRate OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS current DESCRIPTION "the target rate of the storm control. " --风暴控制目标速率 ::= { stormControlEntry 3 } stormControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status of the storm control" --风暴控制行状态 ::= { stormControlEntry 4 } ----------------------------------------------------- --gbnDeviceSwitchAntiDos ----------------------------------------------------- ipfragmnetnumber OBJECT-TYPE SYNTAX INTEGER (0..800) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragment number." --IP分片报文的处理数目.默认为800,取值为0到800,当为0的时候不处理分片报文. ::= { gbnDeviceSwitchAntiDos 1 } ipTTL OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control IP with TTL=0 packet,default is not traffic to the CPU." --控制TTL=0的报文是否送往CPU,默认情况是关闭上报CPU. ::= { gbnDeviceSwitchAntiDos 2 } ----------------------------------------------------- -- the bandwidth control ----------------------------------------------------- bandwidthcontrolTable OBJECT-TYPE SYNTAX SEQUENCE OF BandwidthcontrolEntry MAX-ACCESS read-only STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchBandWidth 1 } bandwidthcontrolEntry OBJECT-TYPE SYNTAX BandwidthcontrolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { controlPort } ::= { bandwidthcontrolTable 1 } BandwidthcontrolEntry ::= SEQUENCE { controlPort INTEGER, portEgressBandwidthcontrol INTEGER, portIngressBandwidthcontrol INTEGER } controlPort OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the index of port." ::= { bandwidthcontrolEntry 1 } portEgressBandwidthcontrol OBJECT-TYPE SYNTAX INTEGER (0..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "Egress Speed Value of port, bandwidth control ." ::= { bandwidthcontrolEntry 2 } portIngressBandwidthcontrol OBJECT-TYPE SYNTAX INTEGER (0..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress Speed Value of port, bandwidth control ." ::= { bandwidthcontrolEntry 3 } -- -- END of gbnDeviceSwitch-MIB -- END