-- ***************************************************************** -- QTECH-AUTHEN-KEY-MIB.mib: Qtech Authentication Key MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-AUTHEN-KEY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ConfigStatus FROM QTECH-TC qtechMgmt FROM QTECH-SMI; qtechAuthenKeyMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines authentication key managment mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 24} qtechAuthenKeyMIBObjects OBJECT IDENTIFIER ::= { qtechAuthenKeyMIB 1 } QtechKeyTimeMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Time managment mode of key." SYNTAX INTEGER { infinite(1), -- Key will be valid all along when the key start to become effective duration(2), -- Key will be valid for designate duration when the key start to -- become effective. end-time(3) -- Key will be valid when the key start to become effective till -- designate end time reach. } -- Key management is a method of controlling authentication keys used by some protocol. Not -- all protocols can use key management. To manage authentication keys, define a key chain, -- identify the keys that belong to the key chain, and specify how long each key is valid. Each -- key has its own key identifier (specified with the key chain and key number), -- which is stored locally. -- The combination of the key identifier and the interface associated with the message -- uniquely identifies the authentication algorithm and Message Digest 5 (MD5) authentication -- key in use. -- You can configure multiple keys with life times. Only one authentication packet is sent, -- regardless of how many valid keys exist. The software examines the key numbers in order from -- lowest to highest, and uses the first valid key it encounters. The lifetimes allow for -- overlap during key changes. Note that the router must know these lifetimes. qtechAuthenKeyChainTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechAuthenKeyChainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of key chain entries." ::= { qtechAuthenKeyMIBObjects 1 } qtechAuthenKeyChainEntry OBJECT-TYPE SYNTAX QtechAuthenKeyChainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains key chain." INDEX { qtechAuthenKeyChainName } ::= { qtechAuthenKeyChainTable 1 } QtechAuthenKeyChainEntry ::= SEQUENCE { qtechAuthenKeyChainName DisplayString, qtechAuthenKeyChainEntryStatus ConfigStatus } qtechAuthenKeyChainName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Key chain name of this entry.This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechAuthenKeyChainEntry 1 } qtechAuthenKeyChainEntryStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this entry, set its value to invalid will delete this entry. set its value to valid has no effect." ::= { qtechAuthenKeyChainEntry 2 } qtechAuthenKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechAuthenKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of authentication key entries." ::= { qtechAuthenKeyMIBObjects 2 } qtechAuthenKeyEntry OBJECT-TYPE SYNTAX QtechAuthenKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains authentication key parameters. We must set all specifies valid values for the non-defaulted configuration objects, certainly, it should also modify the default values for the other configuration objects if the defaults are not appropriate. Once the appropriate instance of all the configuration objects have been created or set,the row status should be set to active to initiate the request." INDEX { qtechKeyChainName,qtechAuthenKeyNumber } ::= { qtechAuthenKeyTable 1 } QtechAuthenKeyEntry ::= SEQUENCE { qtechKeyChainName DisplayString, qtechAuthenKeyNumber Integer32, qtechKeyString DisplayString, qtechAuthenKeyReceiveQtechTime DateAndTime, qtechAuthenKeyReceiveTimeMode QtechKeyTimeMode, qtechAuthenKeyReceiveEndTime DateAndTime, qtechAuthenKeyReceiveDuration Unsigned32, qtechAuthenKeySendQtechTime DateAndTime, qtechAuthenKeySendTimeMode QtechKeyTimeMode, qtechAuthenKeySendEndTime DateAndTime, qtechAuthenKeySendDuration Unsigned32, qtechAuthenReceiveKeyState INTEGER, qtechAuthenSendKeyState INTEGER, qtechAuthenKeyEntryStauts RowStatus } qtechKeyChainName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Key chain name of this key belong to which indentified in qtechAuthenKeyChainEntry. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechAuthenKeyEntry 1 } qtechAuthenKeyNumber OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number identify a unique key in the key chain." ::= { qtechAuthenKeyEntry 2 } qtechKeyString OBJECT-TYPE SYNTAX DisplayString(SIZE (1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Key String of the key. The string can contain from 1 to 80 uppercase and lowercase alphanumeric characters, but the first character cannot be a number." ::= { qtechAuthenKeyEntry 3 } qtechAuthenKeyReceiveQtechTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The start time which the key can be received." ::= { qtechAuthenKeyEntry 4 } qtechAuthenKeyReceiveTimeMode OBJECT-TYPE SYNTAX QtechKeyTimeMode MAX-ACCESS read-create STATUS current DESCRIPTION "The time mode of key receive." ::= { qtechAuthenKeyEntry 5 } qtechAuthenKeyReceiveEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The end time which the key can be received." ::= { qtechAuthenKeyEntry 6 } qtechAuthenKeyReceiveDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The duration time which the key is valid, in units of second." ::= { qtechAuthenKeyEntry 7 } qtechAuthenKeySendQtechTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The start time which the key can be send." ::= { qtechAuthenKeyEntry 8 } qtechAuthenKeySendTimeMode OBJECT-TYPE SYNTAX QtechKeyTimeMode MAX-ACCESS read-create STATUS current DESCRIPTION "The time mode of key send." ::= { qtechAuthenKeyEntry 9 } qtechAuthenKeySendEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The end time which the key can be send." ::= { qtechAuthenKeyEntry 10 } qtechAuthenKeySendDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The duration time which the key is valid,in units of second." ::= { qtechAuthenKeyEntry 11 } qtechAuthenReceiveKeyState OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The key is valid or invalid currently for receiving." ::= { qtechAuthenKeyEntry 12 } qtechAuthenSendKeyState OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The key is valid or invalid currently for sending." ::= { qtechAuthenKeyEntry 13 } qtechAuthenKeyEntryStauts OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "entry status for this list." ::= { qtechAuthenKeyEntry 14 } -- conformance information qtechAuthenKeyChainMIBConformance OBJECT IDENTIFIER ::= { qtechAuthenKeyMIB 2 } qtechAuthenKeyChainMIBCompliances OBJECT IDENTIFIER ::= { qtechAuthenKeyChainMIBConformance 1 } qtechAuthenKeyChainMIBGroups OBJECT IDENTIFIER ::= { qtechAuthenKeyChainMIBConformance 2 } -- compliance statements qtechAuthenKeyChainMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Acl MIB" MODULE -- this module MANDATORY-GROUPS { qtechAuthenKeyChainMIBGroup } ::= { qtechAuthenKeyChainMIBCompliances 1 } -- units of conformance qtechAuthenKeyChainMIBGroup OBJECT-GROUP OBJECTS { qtechAuthenKeyChainName, qtechAuthenKeyChainEntryStatus, qtechKeyChainName, qtechAuthenKeyNumber, qtechKeyString, qtechAuthenKeyReceiveQtechTime , qtechAuthenKeyReceiveTimeMode, qtechAuthenKeyReceiveEndTime , qtechAuthenKeyReceiveDuration, qtechAuthenKeySendQtechTime , qtechAuthenKeySendTimeMode , qtechAuthenKeySendEndTime , qtechAuthenKeySendDuration, qtechAuthenReceiveKeyState, qtechAuthenSendKeyState, qtechAuthenKeyEntryStauts } STATUS current DESCRIPTION "A collection of objects providing acl (echo) ability to a Qtech agent." ::= { qtechAuthenKeyChainMIBGroups 1 } END