------------------------------------------------------------------------------- -- Juniper Enterprise Specific MIB: Timing feature defect/event notification MIB -- -- Copyright (c) 2001-2003, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. ------------------------------------------------------------------------------- JUNIPER-TIMING-NOTFNS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Gauge32, TimeTicks, Counter32, Counter64, IpAddress FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- [RFC2579] InterfaceIndex, ifOperStatus FROM IF-MIB -- [RFC2863a] InetAddress FROM INET-ADDRESS-MIB OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF jnxTimingNotfnsMIBRoot, Integer64 FROM JUNIPER-SMI; jnxTimingNotfnsMIB MODULE-IDENTITY LAST-UPDATED "202107180000Z" -- Jun 04, 2021 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box." -- Revision history REVISION "202107180000Z" -- July 18, 2021 DESCRIPTION "Removed the un-supported OID's jnxTimingAlarmNoAnnounceMessageSet, jnxTimingAlarmNoAnnounceMessageClear, jnxTimingAlarmNoSyncMessageSet, jnxTimingAlarmNoSyncMessageClear, jnxTimingAlarmNoDelayResponseMessageSet, jnxTimingAlarmNoDelayResponseMessageClear, jnxTimingAlarmHighPDVDetectedSet, jnxTimingAlarmHighPDVDetectedClear, jnxTimingAlarmSlaveCandidateStateLoseLockSet, jnxTimingAlarmSlaveCandidateStateLoseLockClear, jnxTimingAlarmPtpSyncFailSet, jnxTimingAlarmPtpSyncFailClear, jnxTimingAlarmLossOfReference3Set, jnxTimingAlarmLossOfReference3Clear, jnxTimingAlarmLossOfReference4Set, jnxTimingAlarmLossOfReference4Clear, jnxTimingAlarmDPLLNotLockedSet, jnxTimingAlarmDPLLNotLockedClear, jnxTimingEventDelayAsymmetryExceedMinor, jnxTimingEventDelayAsymmetryExceedCritical." REVISION "202106040000Z" -- Jun 04, 2021 DESCRIPTION "Deprecated jnxTimingEventSynceLckToHldovr and jnxTimingEventSynceHldovrToLck. Instead use jnxTimingEventDpllStatus or jnxTimingEventSynceDpllStatus for all state change notifications." REVISION "201909020408Z" -- Tue Sep 02 20:08 2019 IST DESCRIPTION "Modified to include additional traps for extensibility" REVISION "201511140408Z" -- Tue Nov 15 04:08 2016 UTC DESCRIPTION "Modifed jnxUtcValid to correct the value when queried from external server" REVISION "201510140000Z" -- Fri Mar 15 15:41 2013 UTC DESCRIPTION "Modifed jnxClksyncQualityCode to include the list of possible values (similar to G.781 standard)" REVISION "201303151541Z" -- Fri Mar 15 15:41 2013 UTC DESCRIPTION "Initial Version" ::= { jnxTimingNotfnsMIBRoot 1 } jnxTimingFaults OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 1 } jnxTimingEvents OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 2 } jnxTimingNotfObjects OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 3 } jnxTimingConformance OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 4 } jnxTimingPerformanceMonitor OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 5 } jnxTimingPassivePortMonitor OBJECT IDENTIFIER ::= { jnxTimingNotfnsMIB 6 } ------------------------------------------------------------------------------- -- Textual Conventions ------------------------------------------------------------------------------- JnxPtpClockIdTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Clock Identifier." SYNTAX OCTET STRING (SIZE (8)) JnxPtpPhaseOffsetTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Phase Offset." SYNTAX Integer32 (0..1000) ------------------------------------------------------------------------------- -- Objects ------------------------------------------------------------------------------- jnxClksyncState OBJECT-TYPE SYNTAX INTEGER { clear(0), set(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Fault status." ::= { jnxTimingNotfObjects 1 } jnxClksyncIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Snmp ifIndex of member interface." ::= { jnxTimingNotfObjects 2 } jnxClksyncIntfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface name." ::= { jnxTimingNotfObjects 3 } jnxAcbFpgaRevMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Major version information." ::= { jnxTimingNotfObjects 4 } jnxAcbFpgaRevMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Minor version information." ::= { jnxTimingNotfObjects 5 } jnxBootCpldFpgaRevMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Major version information." ::= { jnxTimingNotfObjects 6 } jnxBootCpldFpgaRevMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Minor version information." ::= { jnxTimingNotfObjects 7 } jnxClksyncQualityCode OBJECT-TYPE SYNTAX INTEGER { --eec1 prc(2), ssu-a(4), ssu-b(8), sec(11), dnu(15), --eec2 prs(1), stu(0), st2(7), tnc(16), st3e(13), st3(10), smc(12), st4(14), dus(17) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "SSM/ESMC quality levels." ::= { jnxTimingNotfObjects 8 } jnxClksyncDpllState OBJECT-TYPE SYNTAX INTEGER { init-phase(0), acquiring-lock(1), locked(2), holdover(3), free-run(4), unknown(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "BITS/SyncE DPLL states." ::= { jnxTimingNotfObjects 9 } jnxPtpServoState OBJECT-TYPE SYNTAX INTEGER { init(0), free-run(1), holdover(2), acquiring(3), freq-locked(4), phase-aligned(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP servo states." ::= { jnxTimingNotfObjects 10 } jnxPtpClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP clock status." ::= { jnxTimingNotfObjects 11 } jnxPtpAccuracy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP clock accuracy." ::= { jnxTimingNotfObjects 12 } jnxPtpGmId OBJECT-TYPE SYNTAX JnxPtpClockIdTC MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP Grand Master clock-id." ::= { jnxTimingNotfObjects 13 } jnxPtpGmIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP Grand Master stream ip-address." ::= { jnxTimingNotfObjects 14 } jnxClkStreamHandle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP clock accuracy." ::= { jnxTimingNotfObjects 15 } jnxRemoteIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP clock stream's remote ip-address." ::= { jnxTimingNotfObjects 16 } jnxClksyncHybridState OBJECT-TYPE SYNTAX INTEGER { init(0), freq-acq(1), freqLck-phaseAcq1(2), freqLck-phaseAcq2(3), freqLck-phaseAcq3(4), freq-phase-lck(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "hybrid states." ::= { jnxTimingNotfObjects 17 } jnxPtpPhaseOffset OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Phase Offset." ::= { jnxTimingNotfObjects 18 } jnxClksyncQualityCodeStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "SSM/ESMC quality levels in string format." ::= { jnxTimingNotfObjects 19 } jnxClksyncDpllStateStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Dpll state in string format." ::= { jnxTimingNotfObjects 20 } jnxPtpServoStateStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP servo states in string format." ::= { jnxTimingNotfObjects 21 } jnxClksyncHybridStateStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "hybrid states in string format." ::= { jnxTimingNotfObjects 22 } jnxClksyncColorStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Color of the LED unit." ::= { jnxTimingNotfObjects 23 } jnxPtpPhaseOffsetThresholdExceeded OBJECT-TYPE SYNTAX DisplayString (SIZE(0..512)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates whether the Phase Threshold of the monitored Passive Port has exceeded the configured Max Phase Offset Threshold as per Annex G of ITU-T G.8275.1" ::= { jnxTimingNotfObjects 24 } jnxPtpUtcOffset OBJECT-TYPE SYNTAX JnxPtpPhaseOffsetTC MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "UTC Offset." ::= { jnxTimingNotfObjects 25 } jnxGpsRecvStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Gps Receiver Status" ::= { jnxTimingNotfObjects 26 } jnxPtpAdvClockClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "UTC Offset." ::= { jnxTimingNotfObjects 27 } jnxClksyncSynceLockedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Snmp ifIndex of member interface." ::= { jnxTimingNotfObjects 28 } jnxClksyncSynceLockedIntfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface name." ::= { jnxTimingNotfObjects 29 } jnxClksyncSynceQualityTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxClksyncSynceQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Synce Table to get Quality metrics for all configured sources" ::= { jnxTimingNotfObjects 30 } jnxPtpUtcValid OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PTP UTC Offset Valid." ::= { jnxTimingNotfObjects 31 } jnxTimingFrequencyTraceability OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Frequency Traceable Flag." ::= { jnxTimingNotfObjects 34 } jnxTimingTimeTraceability OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Time Traceable Flag." ::= { jnxTimingNotfObjects 35 } jnxClksyncSynceQualityEntry OBJECT-TYPE SYNTAX JnxClksyncSynceQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Synce Table to get Quality metrics for all configured sources" INDEX { jnxClksyncSynceQualityTableIndex } ::= { jnxClksyncSynceQualityTable 1 } JnxClksyncSynceQualityEntry ::= SEQUENCE { jnxClksyncSynceQualityTableIndex Integer32(1..4), jnxClksyncSynceQualityIntfName DisplayString, jnxClksyncSynceQualityValue DisplayString } jnxClksyncSynceQualityTableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each configured source, not displayed for get/walk" ::= { jnxClksyncSynceQualityEntry 1 } jnxClksyncSynceQualityIntfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ifName of the configured source" ::= { jnxClksyncSynceQualityEntry 2 } jnxClksyncSynceQualityValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Quality Level of the configured source" ::= { jnxClksyncSynceQualityEntry 3 } jnxClksyncPtpOperationalMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxClksyncPtpOperationalMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Operational Master Table displays the upstream clock details" ::= { jnxTimingNotfObjects 36 } jnxClksyncPtpOperationalMasterEntry OBJECT-TYPE SYNTAX JnxClksyncPtpOperationalMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Operational Master Entrydisplays the upstream clock details" INDEX { jnxClksyncPtpOperationalMasterIndex, jnxClksyncPtpOperationalMasterAttrIndex} ::= { jnxClksyncPtpOperationalMasterTable 1 } JnxClksyncPtpOperationalMasterEntry ::= SEQUENCE { jnxClksyncPtpOperationalMasterIndex Integer32, jnxClksyncPtpOperationalMasterAttrIndex Integer32, jnxClksyncPtpOperationalMasters DisplayString } jnxClksyncPtpOperationalMasterIndex OBJECT-TYPE SYNTAX Integer32(1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each operational master, not displayed for get/walk" ::= { jnxClksyncPtpOperationalMasterEntry 1 } jnxClksyncPtpOperationalMasterAttrIndex OBJECT-TYPE SYNTAX Integer32(1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each attribute displayed for master, not displayed index not displayed for get/walk" ::= { jnxClksyncPtpOperationalMasterEntry 2 } jnxClksyncPtpOperationalMasters OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Attributes displayed for each master i.e ifl, localip, no_of_rem_clks and followed by remote ips" ::= { jnxClksyncPtpOperationalMasterEntry 3 } jnxClksyncPtpOperationalSlaveTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxClksyncPtpOperationalSlaveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Operational Slave Table displays the downstream clock details" ::= { jnxTimingNotfObjects 37 } jnxClksyncAdditionalInformationStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Additional information in string format." ::= { jnxTimingNotfObjects 38 } jnxClksyncPtpOperationalSlaveEntry OBJECT-TYPE SYNTAX JnxClksyncPtpOperationalSlaveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Operational Slave Entry displays the downstream clock details" INDEX { jnxClksyncPtpOperationalSlaveIndex, jnxClksyncPtpOperationalSlaveAttrIndex} ::= { jnxClksyncPtpOperationalSlaveTable 1 } JnxClksyncPtpOperationalSlaveEntry ::= SEQUENCE { jnxClksyncPtpOperationalSlaveIndex Integer32, jnxClksyncPtpOperationalSlaveAttrIndex Integer32, jnxClksyncPtpOperationalSlaves DisplayString } jnxClksyncPtpOperationalSlaveIndex OBJECT-TYPE SYNTAX Integer32(1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each operational slave, not displayed for get/walk" ::= { jnxClksyncPtpOperationalSlaveEntry 1 } jnxClksyncPtpOperationalSlaveAttrIndex OBJECT-TYPE SYNTAX Integer32(1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each attribute displayed for master, not displayed index not displayed for get/walk" ::= { jnxClksyncPtpOperationalSlaveEntry 2 } jnxClksyncPtpOperationalSlaves OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Attributes displayed for each slave i.e ifl, localip, no_of_rem_clks and followed by remote ips" ::= { jnxClksyncPtpOperationalSlaveEntry 3 } ------------------------------------------------------ -- Start: IEEE 1588v2.1 (2019) Annex J1 & J3 Objects ------------------------------------------------------ jnxPtpPerformanceMonitorEnabled OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that performance monitor feature as per Annex J1 of IEEE 1588v2.1 (2019) is enabled or disabled." ::= { jnxTimingPerformanceMonitor 1 } jnxPtpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxPtpStatisticsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitor statistics table as per Annex J3 of IEEE 1588v2.1 (2019)." ::= { jnxTimingPerformanceMonitor 2 } jnxPtpStatisticsTableEntry OBJECT-TYPE SYNTAX JnxPtpStatisticsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitor statistics table entries." INDEX { jnxPtpStatisticsAttrIndex } ::= { jnxPtpStatisticsTable 1 } JnxPtpStatisticsTableEntry ::= SEQUENCE { jnxPtpStatisticsAttrIndex Unsigned32, jnxPtpStatisticsTimestamp DisplayString, jnxPtpStatisticsTxAnnounce Unsigned32, jnxPtpStatisticsTxSync Unsigned32, jnxPtpStatisticsTxDelayRequest Unsigned32, jnxPtpStatisticsTxDelayResponse Unsigned32, jnxPtpStatisticsTxFollowup Unsigned32, jnxPtpStatisticsTxError Unsigned32, jnxPtpStatisticsAnnouncedFromAllForeignMasters Unsigned32, jnxPtpStatisticsRxAnnounce Unsigned32, jnxPtpStatisticsRxSync Unsigned32, jnxPtpStatisticsRxDelayRequest Unsigned32, jnxPtpStatisticsRxDelayResponse Unsigned32, jnxPtpStatisticsRxFollowup Unsigned32, jnxPtpStatisticsRxError Unsigned32 } jnxPtpStatisticsAttrIndex OBJECT-TYPE SYNTAX Unsigned32 (1..98) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each performance monitor statistics data attribute: (1..96) represents 15 min counters; (97..98) represents 24 h counters." ::= { jnxPtpStatisticsTableEntry 1 } jnxPtpStatisticsTimestamp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of PTP slave port monitor statistics data." ::= { jnxPtpStatisticsTableEntry 2 } jnxPtpStatisticsTxAnnounce OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Announce messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 3 } jnxPtpStatisticsTxSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Sync messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 4 } jnxPtpStatisticsTxDelayRequest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Delay Request messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 5 } jnxPtpStatisticsTxDelayResponse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Delay Response messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 6 } jnxPtpStatisticsTxFollowup OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Follow Up messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 7 } jnxPtpStatisticsTxError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Transmit Error messages that have been transmitted for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 8 } jnxPtpStatisticsAnnouncedFromAllForeignMasters OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the total number of announce messages from the foreign Masters that have been received for each 15 min and 24 h interval as per Annex J3 of IEEE 1588v2.1 (2019)." ::= { jnxPtpStatisticsTableEntry 9 } jnxPtpStatisticsRxAnnounce OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Announce messages from the current GM that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 10 } jnxPtpStatisticsRxSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Sync messages that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 11 } jnxPtpStatisticsRxDelayRequest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Delay Request messages that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 12 } jnxPtpStatisticsRxDelayResponse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Delay Response messages that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 13 } jnxPtpStatisticsRxFollowup OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Follow Up messages that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 14 } jnxPtpStatisticsRxError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of Receive Error messages that have been received for each 15 min and 24 h interval." ::= { jnxPtpStatisticsTableEntry 15 } jnxPtpPerformanceTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxPtpPerformanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitor table as per Annex J1 of IEEE 1588v2.1 (2019)." ::= { jnxTimingPerformanceMonitor 3 } jnxPtpPerformanceEntry OBJECT-TYPE SYNTAX JnxPtpPerformanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP performance entry displays the performance monitor data details." INDEX { jnxPtpPerformanceAttrIndex } ::= { jnxPtpPerformanceTable 1 } JnxPtpPerformanceEntry ::= SEQUENCE { jnxPtpPerformanceAttrIndex Unsigned32, jnxPtpPerformanceIntfName DisplayString, jnxPtpPerformanceSourcePortIdentity Unsigned32, jnxPtpPerformanceTimestamp DisplayString, jnxPtpPerformancePeriodComplete INTEGER, jnxPtpPerformanceDataValid INTEGER, jnxPtpPerformanceDataInvalidReason DisplayString, jnxPtpPerformanceAverageMasterSlaveDelay Integer64, jnxPtpPerformanceMinMasterSlaveDelay Integer64, jnxPtpPerformanceMaxMasterSlaveDelay Integer64, jnxPtpPerformanceStdDevMasterSlaveDelay Integer64, jnxPtpPerformanceAverageSlaveMasterDelay Integer64, jnxPtpPerformanceMinSlaveMasterDelay Integer64, jnxPtpPerformanceMaxSlaveMasterDelay Integer64, jnxPtpPerformanceStdDevSlaveMasterDelay Integer64, jnxPtpPerformanceAverageMeanPathDelay Integer64, jnxPtpPerformanceMinMeanPathDelay Integer64, jnxPtpPerformanceMaxMeanPathDelay Integer64, jnxPtpPerformanceStdDevMeanPathDelay Integer64, jnxPtpPerformanceAverageOffsetFromMaster Integer64, jnxPtpPerformanceMinOffsetFromMaster Integer64, jnxPtpPerformanceMaxOffsetFromMaster Integer64, jnxPtpPerformanceStdDevOffsetFromMaster Integer64 } jnxPtpPerformanceAttrIndex OBJECT-TYPE SYNTAX Unsigned32 (1..98) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for each performance monitor attribute: (1..96) represents 15 min counters; (97..98) represents 24 h counters." ::= { jnxPtpPerformanceEntry 1 } jnxPtpPerformanceIntfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name for ptp performance monitor data." ::= { jnxPtpPerformanceEntry 2 } jnxPtpPerformanceSourcePortIdentity OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Idenity of the source port associated with the performance monitor data." ::= { jnxPtpPerformanceEntry 3 } jnxPtpPerformanceTimestamp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of PTP slave port monitor measurement data." ::= { jnxPtpPerformanceEntry 4 } jnxPtpPerformancePeriodComplete OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to represent if any data collected within a measurement window (15min or 24h) is partial as per IEEE 1588 2019 Annex J.4.1." ::= { jnxPtpPerformanceEntry 5 } jnxPtpPerformanceDataValid OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Validity of performance monitor data for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 6 } jnxPtpPerformanceDataInvalidReason OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "PTP slave port monitor measurement data (15min/24h) invalid reasons: 1) PTP servo sync state not phase aligned & Phy sync state not in sync. 2) PTP servo sync state not phase aligned & Phy sync state in sync. 3) PTP servo sync state phase aligned & Phy sync state not in sync. 4) Measurement not started: PTP servo sync state not phase aligned." ::= { jnxPtpPerformanceEntry 7 } jnxPtpPerformanceAverageMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of the Master to Slave Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 8 } jnxPtpPerformanceMinMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum of the Master to Slave Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 9 } jnxPtpPerformanceMaxMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of the Master to Slave Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 10 } jnxPtpPerformanceStdDevMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Standard Deviation of the Master to Slave Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 11 } jnxPtpPerformanceAverageSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of the Slave to Master Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 12 } jnxPtpPerformanceMinSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum of the Slave to Master Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 13 } jnxPtpPerformanceMaxSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of the Slave to Master Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 14 } jnxPtpPerformanceStdDevSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Standard Deviation of the Slave to Master Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 15 } jnxPtpPerformanceAverageMeanPathDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of the Mean Path Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 16 } jnxPtpPerformanceMinMeanPathDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum of the Mean Path Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 17 } jnxPtpPerformanceMaxMeanPathDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of the Mean Path Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 18 } jnxPtpPerformanceStdDevMeanPathDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Standard Deviation of the Mean Path Delay for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 19 } jnxPtpPerformanceAverageOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of the Phase Offset From Master for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 20 } jnxPtpPerformanceMinOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum of the Phase Offset From Master for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 21 } jnxPtpPerformanceMaxOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of the Phase Offset From Master for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 22 } jnxPtpPerformanceStdDevOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Stdandard Deviation of the Phase Offset From Master for each 15 min and 24 h interval." ::= { jnxPtpPerformanceEntry 23 } --------------------------------------------------- -- End: IEEE 1588v2.1 (2019) Annex J1 & J3 Objects --------------------------------------------------- --------------------------------------------------- -- Start: - Annex G of ITU-T G.8275.1 Objects --------------------------------------------------- jnxPtpPassivePortMonitorEnabled OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that passive port monitor feature as per Annex G of ITU-T G.8275.1 is enabled or disabled." ::= { jnxTimingPassivePortMonitor 1 } jnxPtpPassivePortMonitorDelayRequestInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents passive port monitor feature delay request interval as per Annex G of ITU-T G.8275.1." ::= { jnxTimingPassivePortMonitor 2 } jnxPtpPassivePortMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxPtpPassivePortMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP passive port performance monitor table to get the passive port performance against the selected slave port." ::= { jnxTimingPassivePortMonitor 3 } jnxPtpPassivePortMonitorEntry OBJECT-TYPE SYNTAX JnxPtpPassivePortMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP passive port performance monitor entry table to get the passive port performance against the selected slave port." INDEX { jnxPtpPassivePortMonitorIntfName } ::= { jnxPtpPassivePortMonitorTable 1 } JnxPtpPassivePortMonitorEntry ::= SEQUENCE { jnxPtpPassivePortMonitorIntfName DisplayString, jnxPtpPassivePortMonitorSourcePortIdentity DisplayString, jnxPtpPassivePortMonitorDataValid INTEGER, jnxPtpPassivePortMonitorStartTimestamp DisplayString, jnxPtpPassivePortMonitorEndTimestamp DisplayString, jnxPtpPassivePortMonitorAveragePhaseOffsetFromMaster Integer64, jnxPtpPassivePortMonitorMinPhaseOffsetFromMaster Integer64, jnxPtpPassivePortMonitorMaxPhaseOffsetFromMaster Integer64, jnxPtpPassivePortMonitorAverageMasterSlaveDelay Integer64, jnxPtpPassivePortMonitorMinMasterSlaveDelay Integer64, jnxPtpPassivePortMonitorMaxMasterSlaveDelay Integer64, jnxPtpPassivePortMonitorAverageSlaveMasterDelay Integer64, jnxPtpPassivePortMonitorMinSlaveMasterDelay Integer64, jnxPtpPassivePortMonitorMaxSlaveMasterDelay Integer64, jnxPtpPassivePortMonitorAveragePathDelay Integer64, jnxPtpPassivePortMonitorMaxPhaseOffsetThreshold Unsigned32, jnxPtpPassivePortMonitorPhaseOffsetThresholdExceeded INTEGER, jnxPtpPassivePortMonitorPortConfig INTEGER, jnxPtpPassivePortMonitorPortState INTEGER } jnxPtpPassivePortMonitorIntfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface name for PTP passive port data displayed for the stream." ::= { jnxPtpPassivePortMonitorEntry 1 } jnxPtpPassivePortMonitorSourcePortIdentity OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identity of the source port to which PTP passive port data is associated." ::= { jnxPtpPassivePortMonitorEntry 2 } jnxPtpPassivePortMonitorDataValid OBJECT-TYPE SYNTAX INTEGER { valid(0), inactive(1), not-applicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This describes the validity of the data. If port state is passive and, passive port monitoring feature is enabled, then there is a valid measurement data available set to (0). If port state is other than passive, then not-applicable will be set to (1); and if port state is passive and servo state is other than phase-aligned, this will be set to (2) inactive." ::= { jnxPtpPassivePortMonitorEntry 3 } jnxPtpPassivePortMonitorStartTimestamp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Start Timestamp of PTP passive port monitor performance data." ::= { jnxPtpPassivePortMonitorEntry 4 } jnxPtpPassivePortMonitorEndTimestamp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "End Timestamp of PTP passive port monitor performance data." ::= { jnxPtpPassivePortMonitorEntry 5 } jnxPtpPassivePortMonitorAveragePhaseOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Phase Offset value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 6 } jnxPtpPassivePortMonitorMinPhaseOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Phase Offset value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 7 } jnxPtpPassivePortMonitorMaxPhaseOffsetFromMaster OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Phase Offset value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 8 } jnxPtpPassivePortMonitorAverageMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Master to Slave Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 9 } jnxPtpPassivePortMonitorMinMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Master to Slave Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 10 } jnxPtpPassivePortMonitorMaxMasterSlaveDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Master to Slave Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 11 } jnxPtpPassivePortMonitorAverageSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Slave to Master Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 12 } jnxPtpPassivePortMonitorMinSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Slave to Master Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 13 } jnxPtpPassivePortMonitorMaxSlaveMasterDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Slave to Master Delay value of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 14 } jnxPtpPassivePortMonitorAveragePathDelay OBJECT-TYPE SYNTAX Integer64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Mean Path Delay of the passive port from Master." ::= { jnxPtpPassivePortMonitorEntry 15 } jnxPtpPassivePortMonitorMaxPhaseOffsetThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Phase Offset threshold acceptable between the passive port and slave port." ::= { jnxPtpPassivePortMonitorEntry 16 } jnxPtpPassivePortMonitorPhaseOffsetThresholdExceeded OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the status as whether the passive port exceeded the configured Max offset threshold or not." ::= { jnxPtpPassivePortMonitorEntry 17 } jnxPtpPassivePortMonitorPortConfig OBJECT-TYPE SYNTAX INTEGER { stateful(0), stateful-slave-only(1), stateful-master-only(2), stateful-not-master(3), stateful-measure-only(4), stateful-not-master-and-measure-only(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the current state of the configured passive port." ::= { jnxPtpPassivePortMonitorEntry 18 } jnxPtpPassivePortMonitorPortState OBJECT-TYPE SYNTAX INTEGER { initializing(0), faulty(1), disabled(2), listening(3), pre-master(4), master(5), passive(6), uncalibrated(7), slave(8), unknown(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the current state of the port." ::= { jnxPtpPassivePortMonitorEntry 19 } -------------------------------------------- -- End: - Annex G of ITU-T G.8275.1 Objects -------------------------------------------- ------------------------------------------------------------------------------- -- Faults ------------------------------------------------------------------------------- jnxTimingFaultLOSSet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies that Loss Of Signal has been detected. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 1 } jnxTimingFaultLOSClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies that Loss Of Signal has been cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 2 } jnxTimingFaultEFDSet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Exceeded frequency deviation. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 3 } jnxTimingFaultEFDClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Exceeded frequency deviation cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 4 } jnxTimingFaultLOESMCSet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Loss of ESMC is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 5 } jnxTimingFaultLOESMCClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Loss of ESMC is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 6 } jnxTimingFaultQLFailSet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies ESMC/SSM Quality Level failed is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 7 } jnxTimingFaultQLFailClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies ESMC/SSM Quality Level failed is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 8 } jnxTimingFaultLTISet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Loss of timing information is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 9 } jnxTimingFaultLTIClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Loss of timing information is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 10 } jnxTimingFaultAcbcFpgaVerNotCompatible NOTIFICATION-TYPE OBJECTS { jnxAcbFpgaRevMajor, jnxAcbFpgaRevMinor } STATUS current DESCRIPTION "A trap which signifies ACBC FPGA version is not compatible. jnxBootCpldFpgaRevMajor indicates the current ACBC FPGA Major revision jnxBootCpldFpgaRevMinor indicates the current ACBC FPGA Minor revision." ::= { jnxTimingFaults 11 } jnxTimingFaultBootCpldVerNotCompatible NOTIFICATION-TYPE OBJECTS { jnxBootCpldFpgaRevMajor, jnxBootCpldFpgaRevMinor } STATUS current DESCRIPTION "A trap which signifies Boot-cpld version is not compatible. jnxClksyncVersion indicates the current Boot-cpld version." ::= { jnxTimingFaults 12 } jnxTimingFaultPriSrcFailed NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Primary source failed (Whenever PFM/CFM/SCM error occurs). jnxClksyncIfIndex is the Primary source interface index jnxClksyncIntfName is the Primary source interface name." ::= { jnxTimingFaults 13 } jnxTimingFaultSecSrcFailed NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Secondary source failed (Whenever PFM/CFM/SCM error occurs). jnxClksyncIfIndex is the Secondary source interface index jnxClksyncIntfName is the Secondary source interface name." ::= { jnxTimingFaults 14 } jnxTimingFaultPtpUniNegRateRejectSet NOTIFICATION-TYPE OBJECTS { jnxClkStreamHandle, jnxRemoteIpAddr } STATUS current DESCRIPTION "A trap which signifies: When acting as MASTER - Failing/rejecting clients for signaling messages When acting as SLAVE - Failing or receiving rejection for signaling messages jnxClkStreamHandle is the clock stream handle jnxRemoteIpAddr is the clock stream's remote ip-address." ::= { jnxTimingFaults 15 } jnxTimingFaultPtpUniNegRateRejectClear NOTIFICATION-TYPE OBJECTS { jnxClkStreamHandle, jnxRemoteIpAddr } STATUS current DESCRIPTION "A trap which signifies: When acting as MASTER - Failing/rejecting clients for signaling messages When acting as SLAVE - Failing or receiving rejection for signaling messages jnxClkStreamHandle is the clock stream handle jnxRemoteIpAddr is the clock stream's remote ip-address." ::= { jnxTimingFaults 16 } ------------------------------------------------------------------------------- -- Events ------------------------------------------------------------------------------- jnxTimingEventPriSrcRecovered NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Primary source recovered. jnxClksyncIfIndex is the Primary source interface index jnxClksyncIntfName is the Primary source interface name." ::= { jnxTimingEvents 1 } jnxTimingEventSecSrcRecovered NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies Secondary source recovered. jnxClksyncIfIndex is the Secondary source interface index jnxClksyncIntfName is the Secondary source interface name." ::= { jnxTimingEvents 2 } jnxTimingEventPriRefChanged NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, -- new ref ifIndex jnxClksyncIntfName -- new ref interface name } STATUS current DESCRIPTION "A trap which signifies Primary reference changed (Ifd name change or change from synce to BITS/external interface etc). jnxClksyncIfIndex is the Primary reference interface index jnxClksyncIntfName is the Primary reference interface name." ::= { jnxTimingEvents 3 } jnxTimingEventSecRefChanged NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, -- new ref ifIndex jnxClksyncIntfName -- new ref interface name } STATUS current DESCRIPTION "A trap which signifies Secondary reference changed (Ifd name change or change from synce to BITS/external interface etc). jnxClksyncIfIndex is the Secondary reference interface index jnxClksyncIntfName is the Secondary reference interface name." ::= { jnxTimingEvents 4 } jnxTimingEventQLChangedRx NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName, jnxClksyncQualityCode, -- new quality code jnxClksyncQualityCodeStr -- new quality code string } STATUS current DESCRIPTION "A trap which signifies RX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncQualityCode is the SSM/ESMC quality level jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format." ::= { jnxTimingEvents 5 } jnxTimingEventQLChangedTx NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName, jnxClksyncQualityCode, -- new quality code jnxClksyncQualityCodeStr -- new quality code string } STATUS current DESCRIPTION "A trap which signifies TX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncQualityCode is the SSM/ESMC quality level jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format." ::= { jnxTimingEvents 6 } jnxTimingEventSynceHldovrToLck NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS deprecated DESCRIPTION "A trap which signifies SyncE Holdover to Locked EEC state. jnxClksyncIfIndex is the SyncE interface index jnxClksyncIntfName is the SyncE interface name." ::= { jnxTimingEvents 7 } jnxTimingEventSynceLckToHldovr NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS deprecated DESCRIPTION "A trap which signifies SyncE Locked to Holdover EEC state. jnxClksyncIfIndex is the SyncE interface index jnxClksyncIntfName is the SyncE interface name." ::= { jnxTimingEvents 8 } jnxTimingEventDpllStatus NOTIFICATION-TYPE OBJECTS { jnxClksyncDpllState, jnxClksyncDpllStateStr } STATUS current DESCRIPTION "A trap which signifies that DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncDpllState indicates the Dpll status jnxClksyncDpllStateStr indicates the Dpll status in string format." ::= { jnxTimingEvents 9 } jnxTimingEventSynceDpllStatus NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName, jnxClksyncDpllState, jnxClksyncDpllStateStr } STATUS current DESCRIPTION "A trap which signifies that Synce DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncIfIndex is the interface index from which Frequency is derived jnxClksyncIntfName is the interface name from which Frequency is derived jnxClksyncDpllState indicates the Dpll status jnxClksyncDpllStateStr indicates the Dpll status in string format." ::= { jnxTimingEvents 10 } jnxTimingEventBitsDpllStatus NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName, jnxClksyncDpllState, jnxClksyncDpllStateStr } STATUS current DESCRIPTION "A trap which signifies that BITS DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncIfIndex is the interface index from which Frequency is derived jnxClksyncIntfName is the interface name from which Frequency is derived jnxClksyncDpllState indicates the Dpll status jnxClksyncDpllStateStr indicates the Dpll status in string format." ::= { jnxTimingEvents 11 } jnxTimingEventPtpServoStatus NOTIFICATION-TYPE OBJECTS { jnxPtpServoState, jnxPtpServoStateStr } STATUS current DESCRIPTION "A trap which signifies that PTP servo state (Init, Acquiring, PhaseAligned, FreeRun, Holdover). jnxPtpServoState indicates the ptp servo status jnxPtpServoStateStr indicates the ptp servo status in string format." ::= { jnxTimingEvents 12 } jnxTimingEventPtpGMClockClassChange NOTIFICATION-TYPE OBJECTS { jnxPtpGmId, jnxPtpClass } STATUS current DESCRIPTION "A trap which signifies PTP clock class changes. jnxPtpGmId indicates the ptp Grand Master clock-id jnxPtpClass indicates the ptp Grand Master clock status." ::= { jnxTimingEvents 13 } jnxTimingEventPtpGMClockAccuracyChange NOTIFICATION-TYPE OBJECTS { jnxPtpGmId, jnxPtpAccuracy } STATUS current DESCRIPTION "A trap which signifies PTP clock accuracy changes. jnxPtpGmId indicates the ptp Grand Master clock-id jnxPtpAccuracy indicates the ptp Grand Master clock accuracy." ::= { jnxTimingEvents 14 } jnxTimingEventPtpGMChange NOTIFICATION-TYPE OBJECTS { jnxPtpGmId } STATUS current DESCRIPTION "A trap which signifies PTP Grand Master changes. jnxPtpGmId indicates the ptp Grand Master clock-id." ::= { jnxTimingEvents 15 } jnxTimingEventHybridStatus NOTIFICATION-TYPE OBJECTS { jnxClksyncHybridState, jnxClksyncHybridStateStr } STATUS current DESCRIPTION "A trap which signifies that Hybrid state (Init, FreqAcq, FreqLckPhaseAcq, FreqPhaseLck). jnxClksyncHybridState indicates the hybrid status jnxClksyncHybridStateStr indicates the hybrid status in string format." ::= { jnxTimingEvents 16 } jnxTimingEventSquelchSet NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies that interface status changed to squelched. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 17 } jnxTimingEventSquelchClear NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName } STATUS current DESCRIPTION "A trap which signifies that interface status changed to active. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name." ::= { jnxTimingFaults 18 } jnxTimingEventLedColorChange NOTIFICATION-TYPE OBJECTS { jnxClksyncIfIndex, jnxClksyncIntfName, jnxClksyncColorStr -- new LED color } STATUS current DESCRIPTION "A trap which signifies TX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncColorStr is the color of the LED unit." ::= { jnxTimingEvents 19 } jnxTimingPhaseOffsetThresholdExceeded NOTIFICATION-TYPE OBJECTS { jnxPtpPhaseOffsetThresholdExceeded } STATUS current DESCRIPTION "A trap which signifies Passive Port Threshold Exceeded. jnxPtpPhaseOffsetThresholdExceeded indicates whether the Phase Threshold of the monitored Passive Port has exceeded the configured Max Phase Offset Threshold as per." ::= { jnxTimingEvents 20 } jnxTimingAlarmNoForeignMasterSet NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that there is no foreign master available. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 29 } jnxTimingAlarmNoForeignMasterClear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that there is now a foreign master available. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 30 } jnxTimingAlarmPtpLocalClockOutOfSyncSet NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that the local clock is out of sync. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 33 } jnxTimingAlarmPtpLocalClockOutOfSyncClear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that the local clock is no more out of sync. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 34 } jnxTimingAlarmLossOfReference1Set NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has lost reference1. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 35 } jnxTimingAlarmLossOfReference1Clear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has regained reference1. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 36 } jnxTimingAlarmLossOfReference2Set NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has lost reference2. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 37 } jnxTimingAlarmLossOfReference2Clear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has regained reference2. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 38 } jnxTimingAlarmNoMoreReferenceSet NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has no references to lock. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 43 } jnxTimingAlarmNoMoreReferenceClear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC has a reference to lock. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 44 } jnxTimingAlarmQlBelowThresholdSet NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC QL has fallen below threshold. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 45 } jnxTimingAlarmQlBelowThresholdClear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that EEC QL has regained the threshold. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 46 } jnxTimingAlarmTodInSignalFailSet NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that TOD input signal has failed. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 49 } jnxTimingAlarmTodInSignalFailClear NOTIFICATION-TYPE OBJECTS { jnxClksyncAdditionalInformationStr } STATUS current DESCRIPTION "A trap which signifies that TOD input signal is good. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on ACX710." ::= { jnxTimingFaults 50 } ------------------------------------------------------------------------------- -- Conformance ------------------------------------------------------------------------------- jnxTimingCompliances OBJECT IDENTIFIER ::= { jnxTimingConformance 1 } jnxTimingGroups OBJECT IDENTIFIER ::= { jnxTimingConformance 2 } jnxTimingCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the Timing Notification MIB." MODULE -- this module -- MANDATORY-GROUPS { -- any mandatory groups should be mentioned here -- } GROUP jnxTimingObjectsGroup DESCRIPTION "This group is optional." GROUP jnxTimingNotfnFaultsGroup DESCRIPTION "This group is optional." GROUP jnxTimingNotfnEventsGroup DESCRIPTION "This group is optional." ::= { jnxTimingCompliances 1 } jnxTimingObjectsGroup OBJECT-GROUP OBJECTS { jnxClksyncState, jnxClksyncIfIndex, jnxClksyncIntfName, jnxAcbFpgaRevMajor, jnxAcbFpgaRevMinor, jnxBootCpldFpgaRevMajor, jnxBootCpldFpgaRevMinor, jnxClksyncQualityCode, jnxClksyncDpllState, jnxPtpServoState, jnxPtpClass, jnxPtpAccuracy, jnxPtpGmId, jnxPtpGmIpAddr, jnxClkStreamHandle, jnxRemoteIpAddr, jnxClksyncHybridState, jnxPtpPhaseOffset, jnxClksyncQualityCodeStr, jnxClksyncDpllStateStr, jnxPtpServoStateStr, jnxClksyncHybridStateStr, jnxClksyncColorStr, jnxPtpPhaseOffsetThresholdExceeded } STATUS current DESCRIPTION "Timing objects group." ::= { jnxTimingGroups 1 } jnxTimingNotfnFaultsGroup NOTIFICATION-GROUP NOTIFICATIONS { jnxTimingFaultLOSSet, jnxTimingFaultLOSClear, jnxTimingFaultEFDSet, jnxTimingFaultEFDClear, jnxTimingFaultLOESMCSet, jnxTimingFaultLOESMCClear, jnxTimingFaultQLFailSet, jnxTimingFaultQLFailClear, jnxTimingFaultLTISet, jnxTimingFaultLTIClear, jnxTimingFaultAcbcFpgaVerNotCompatible, jnxTimingFaultBootCpldVerNotCompatible, jnxTimingFaultPriSrcFailed, jnxTimingFaultSecSrcFailed, jnxTimingFaultPtpUniNegRateRejectSet, jnxTimingFaultPtpUniNegRateRejectClear, jnxTimingAlarmNoForeignMasterSet, jnxTimingAlarmNoForeignMasterClear, jnxTimingAlarmPtpLocalClockOutOfSyncSet, jnxTimingAlarmPtpLocalClockOutOfSyncClear, jnxTimingAlarmLossOfReference1Set, jnxTimingAlarmLossOfReference1Clear, jnxTimingAlarmLossOfReference2Set, jnxTimingAlarmLossOfReference2Clear, jnxTimingAlarmNoMoreReferenceSet, jnxTimingAlarmNoMoreReferenceClear, jnxTimingAlarmQlBelowThresholdSet, jnxTimingAlarmQlBelowThresholdClear, jnxTimingAlarmTodInSignalFailSet, jnxTimingAlarmTodInSignalFailClear } STATUS current DESCRIPTION "Timing defects notification group." ::= { jnxTimingGroups 2 } jnxTimingNotfnEventsGroup NOTIFICATION-GROUP NOTIFICATIONS { jnxTimingEventPriSrcRecovered, jnxTimingEventSecSrcRecovered, jnxTimingEventPriRefChanged, jnxTimingEventSecRefChanged, jnxTimingEventQLChangedRx, jnxTimingEventQLChangedTx, jnxTimingEventSynceHldovrToLck, jnxTimingEventSynceLckToHldovr, jnxTimingEventDpllStatus, jnxTimingEventSynceDpllStatus, jnxTimingEventBitsDpllStatus, jnxTimingEventPtpServoStatus, jnxTimingEventPtpGMClockClassChange, jnxTimingEventPtpGMClockAccuracyChange, jnxTimingEventPtpGMChange, jnxTimingEventHybridStatus, jnxTimingEventSquelchSet, jnxTimingEventSquelchClear, jnxTimingEventLedColorChange, jnxTimingPhaseOffsetThresholdExceeded } STATUS current DESCRIPTION "Timing events notification group." ::= { jnxTimingGroups 3 } END