-- -- comVoip.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285 -- Thursday, October 16, 2014 at 23:49:03 -- ZHONE-COM-VOIP-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddress, InetAddressType FROM INET-ADDRESS-MIB applIndex FROM NETWORK-SERVICES-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC ZhoneCodecType FROM ZHONE-GEN-SUBSCRIBER zhoneVoice FROM Zhone ZhoneRowStatus FROM Zhone-TC; -- To Create Protection Layer header and C code (run in /vob/mibs/src): -- /vob/zhonetools/bin/pahrser.pl iftype.mib Zhone.mib Zhone-TC.mib -- rfc2571.mib genSubscriberMib.mib rfc2233.mib rfc2514.mib -- INET-ADDRESS-MIB.mib comVoip.mib -- -- To Create Mib Handler file (run in /vob/mibs/src): -- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp iftype.mib -- Zhone.mib Zhone-TC.mib rfc2571.mib rfc2514.mib rfc1907.mib -- rfc2233.mib INET-ADDRESS-MIB.mib genSubscriberMib.mib -- rfc2788.mib comVoip.mib -stub -o voipSystemHdlrs.c -- -- -- -- -- -- -- -- 1.3.6.1.4.1.5504.4.3.4 zhoneVoip MODULE-IDENTITY LAST-UPDATED "201408261040Z" -- August 26, 2014 at 10:40 GMT ORGANIZATION "Zhone Technologies." CONTACT-INFO " Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "Voice over IP configuration for Zhone products" REVISION "201410162333Z" -- October 16, 2014 at 23:33 GMT DESCRIPTION "V01.07.27 Added description field to sip-dialplan profile" REVISION "201408261040Z" -- August 26, 2014 at 10:40 GMT DESCRIPTION "V01.07.26 Added dialplan-class field to sip-dialplan profile" REVISION "201407030240Z" -- July 03, 2014 at 02:40 GMT DESCRIPTION "V01.07.25 Added two new fields zhoneVoipServerTransportProtocol, zhoneVoipSigLocalPortNumber to voip-server-entry." REVISION "201406162140Z" -- June 16, 2014 at 21:40 GMT DESCRIPTION "V01.07.24 Add field zhoneVoipServerMessageRetryCount to zhoneVoipServer table" REVISION "201405221409Z" -- May 22, 2014 at 14:09 GMT DESCRIPTION "V01.07.23 Added voipFeatures field to voip-server-entry" REVISION "201401022213Z" -- January 02, 2014 at 22:13 GMT DESCRIPTION "V01.07.22 Added Ericsson APZ60 to the list of Server IDs" REVISION "201209172342Z" -- September 17, 2012 at 23:42 GMT DESCRIPTION "V01.07.21 Added new field registerReadyTimeout to voip server entry" REVISION "201209172339Z" -- September 17, 2012 at 23:39 GMT DESCRIPTION "V01.07.20 Added new field dtmfPayloadId to voip server entry" REVISION "201112220224Z" -- December 22, 2011 at 02:24 GMT DESCRIPTION "V01.07.19 New softswitch alu-5060 is added in zhoneVoipServerId" REVISION "201110201214Z" -- October 20, 2011 at 12:14 GMT DESCRIPTION "V01.07.18 Added new sipDialPlanType intercom" REVISION "201107251144Z" -- July 25, 2011 at 11:44 GMT DESCRIPTION "V01.07.17 -- added rtpDSCP and signalingDSCP" REVISION "200910070141Z" -- October 07, 2009 at 01:41 GMT DESCRIPTION "V01.07.16 -- Added new softswitch genband-g6 to voip-server-entry profile" REVISION "200903210208Z" -- March 21, 2009 at 02:08 GMT DESCRIPTION "V01.07.15 -- Added new softswitch values to voip-server-entry profile" REVISION "200810310112Z" -- October 31, 2008 at 01:12 GMT DESCRIPTION "Added RTP Term Id Syntax in voip-server-entry profile." REVISION "200808272302Z" -- August 27, 2008 at 23:02 GMT DESCRIPTION "Added new sip-dialplan type isdnsig" REVISION "200806111740Z" -- June 11, 2008 at 17:40 GMT DESCRIPTION "V01.07.12 -- Added new soft switches and behaviorStringOne to voip-server-entry profile" REVISION "200707160245Z" -- July 16, 2007 at 02:45 GMT DESCRIPTION "V01.07.11 -- Added new soft switch values and protocl entry to voip-server-entry profile" REVISION "200604131553Z" -- April 13, 2006 at 15:53 GMT DESCRIPTION "V01.07.10 -- add megaco protocol" REVISION "200510111146Z" -- October 11, 2005 at 11:46 GMT DESCRIPTION "V01.07.09 -- copy content of sipCommonCfgExpiresMethodTable to voipserver" REVISION "200507121025Z" -- July 12, 2005 at 10:25 GMT DESCRIPTION "V01.07.08 -- copy content of voipsystem to voipserver" REVISION "200507071606Z" -- July 07, 2005 at 16:06 GMT DESCRIPTION "V01.07.07 -- Add overrideInterfDigitTimeout to zhoneVoipSipDialPlanEntry" REVISION "200507071512Z" -- July 07, 2005 at 15:12 GMT DESCRIPTION "V01.07.06 -- change number-of-digits from 1..32 to 0..32" REVISION "200506011109Z" -- June 01, 2005 at 11:09 GMT DESCRIPTION "V01.07.05 - Added ESA as one of the dialplan type" REVISION "200505191546Z" -- May 19, 2005 at 15:46 GMT DESCRIPTION "V01.07.04 - Changed voipServerEntry in sip-dialplan range to be 0 - 255 for peer to peer case." REVISION "200505142124Z" -- May 14, 2005 at 21:24 GMT DESCRIPTION "V01.07.04 - Added index to voip-server-entry" REVISION "200502281049Z" -- February 28, 2005 at 10:49 GMT DESCRIPTION "V01.07.03 - Added a new field Dial Plan Type" REVISION "200411011434Z" -- November 01, 2004 at 14:34 GMT DESCRIPTION "V01.07.03 - add zhoneVoipServerId" REVISION "200403031740Z" -- March 03, 2004 at 17:40 GMT DESCRIPTION "V01.07.02 - add zhoneVoipServerUdpPortNumber." REVISION "200402241236Z" -- February 24, 2004 at 12:36 GMT DESCRIPTION "V01.07.01 - Update voipServer markup." REVISION "200401061537Z" -- January 06, 2004 at 15:37 GMT DESCRIPTION "V01.07.00 - Added zhoneVoipServerTable." REVISION "200311061008Z" -- November 06, 2003 at 10:08 GMT DESCRIPTION "V01.06.00 - Added system-domain-name field to voip-system profile" REVISION "200310161453Z" -- October 16, 2003 at 14:53 GMT DESCRIPTION "V01.05.00 - Added ipTos entry." REVISION "200308271130Z" -- August 27, 2003 at 11:30 GMT DESCRIPTION "V01.04.00 - Added malicious caller entry" REVISION "200308081719Z" -- August 08, 2003 at 17:19 GMT DESCRIPTION "V01.03.00 - Added destName, prefix strip, prefix add to sip dial plan" REVISION "200305281200Z" -- May 28, 2003 at 12:00 GMT DESCRIPTION "V01.02.00 - added zhoneVoipHuntGroup" REVISION "200303311803Z" -- March 31, 2003 at 18:03 GMT DESCRIPTION "V01.01.00 - added sip dial plan" REVISION "200302181432Z" -- February 18, 2003 at 14:32 GMT DESCRIPTION "V01.00.00 - Initial revision" ::= { zhoneVoice 4 } -- -- Node definitions -- -- 1.3.6.1.4.1.5504.4.3.4.1 zhoneVoipSystem OBJECT-IDENTITY STATUS deprecated DESCRIPTION "Only SIP-PLAR is using this profile. The regular SIP and MGCP setting is moving to Voip-Server-Entry profile." ::= { zhoneVoip 1 } -- 1.3.6.1.4.1.5504.4.3.4.1.1 zhoneVoipSystemProtocol OBJECT-TYPE SYNTAX INTEGER { sip(1), mgcp(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol. Currently, the device only supports SIP." DEFVAL { sip } ::= { zhoneVoipSystem 1 } -- 1.3.6.1.4.1.5504.4.3.4.1.2 zhoneVoipSystemSendCallProceedingTone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch." DEFVAL { false } ::= { zhoneVoipSystem 2 } -- 1.3.6.1.4.1.5504.4.3.4.1.3 zhoneVoipSystemRtcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the Real-Time Control Protocol is enabled for the device. " DEFVAL { false } ::= { zhoneVoipSystem 3 } -- 1.3.6.1.4.1.5504.4.3.4.1.4 zhoneVoipSystemRtcpPacketInterval OBJECT-TYPE SYNTAX Integer32 (2500..10000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled." DEFVAL { 5000 } ::= { zhoneVoipSystem 4 } -- 1.3.6.1.4.1.5504.4.3.4.1.5 zhoneVoipSystemInterdigitTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits. " DEFVAL { 10 } ::= { zhoneVoipSystem 5 } -- 1.3.6.1.4.1.5504.4.3.4.1.6 zhoneVoipSystemIpTos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This parameter indicates the tos value that is set in the ip header for voice of ip traffic." DEFVAL { 0 } ::= { zhoneVoipSystem 6 } -- 1.3.6.1.4.1.5504.4.3.4.1.7 zhoneVoipSystemDomainName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This parameter is ignored." ::= { zhoneVoipSystem 7 } -- 1.3.6.1.4.1.5504.4.3.4.2 zhoneVoipObjects OBJECT-GROUP OBJECTS { nextVoipSipDialPlanId, zhoneVoipSipDialString, zhoneVoipSipDialIpAddr, zhoneVoipSipDialPlanRowStatus, nextZhoneVoipHuntGroupId, zhoneVoipHuntGroupDestUri, zhoneVoipHuntGroupRowStatus, zhoneVoipSipDialPrefixAdd, zhoneVoipSipDialPrefixStrip, zhoneVoipSipDialNumOfDigits, zhoneVoipSipDialDestName, zhoneVoipHuntGroupPortMembers, zhoneVoipHuntGroupDefaultCodec, nextVoipMaliciousCallerId, zhoneVoipMaliciousCallerUri, zhoneVoipServerId, zhoneVoipServerUdpPortNumber, zhoneVoipServerAddr, zhoneVoipServerAddrType, zhoneVoipServerRowStatus, zhoneVoipSipDialPlanType, zhoneVoipServerSessionTimer, zhoneVoipServerSessionExpiration, zhoneVoipServerSessionMinSE, zhoneVoipServerSessionCallerReqTimer, zhoneVoipServerSessionCalleeReqTimer, zhoneVoipServerSessionCallerSpecifyRefresher, zhoneVoipServerSessionCalleeSpecifyRefresher, zhoneVoipServerExpiresInvite, zhoneVoipServerExpiresRegister, zhoneVoipServerHeaderMethod, zhoneVoipMaliciousCallerRowStatus, zhoneVoipMaliciousCallerEnable, zhoneVoipServerBehaviorStringOne } STATUS current DESCRIPTION "Zhone VOIP objects." ::= { zhoneVoip 2 } -- 1.3.6.1.4.1.5504.4.3.4.3 zhoneVoipSipDialPlan OBJECT IDENTIFIER::= { zhoneVoip 3 } -- 1.3.6.1.4.1.5504.4.3.4.3.1 nextVoipSipDialPlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the next unused dial plan entry id. " ::= { zhoneVoipSipDialPlan 1 } -- 1.3.6.1.4.1.5504.4.3.4.3.2 zhoneVoipSipDialPlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneVoipSipDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines a dialing plan for POTS to SIP originations. A dialing plan consists of a series of acceptable dial strings and the corresponding IP addresses to which SIP control messages (e.g., Invite) are sent to initiate the call. Each dial string is represented as digits, wildcards, and regular-expression-like patterns as the following rules show: 1. A leading '*' or '#' are allowed. 2. Digits 0-9 are allowed. 3. A wildcard 'x' represents any digit 0-9 4. A digit range can be specified using brackets [ ], as follows: [135] means a single digit with acceptable values 1,3, or 5. [1-4] means a single digit with acceptable values 1,2,3, or 4. Examples of valid dial strings: 911 - literal digit string 911 #87 - literal digit string #87 *6x - *6 followed by any single digit 35xxx - 35 followed by any 3 digits 77xxx - 77 followed by any 3 digits 3[35]xxx - 33 or 35 followed by any 3 digits 31[1-3]xxxx - 311, 312, 313, followed by any 4 digits Notes: (1) The length of the dial string is limited 1o 128 characters (2) Though the dialplan supports the '#' and '*' keys, the device may not support any features that use them (e.g., *69). (3) In the case where a collected digit set matches more than one dial string, the device will pick the dial string with the most leading literal digits that match. For example, given two dial strings: 35xxx 3[35]xxx and a collected digit set of 35123, the first dial plan string is selected because it contains two leading literal digits that match, as opposed to the second, which has only one leading literal digit. (4) Variable length dial strings, e.g. 353 followed by any number of digits, are not supported. (5) In the future, a dial string may be configurable such that it only applies to a subset of the supported ports (e.g., ports with international calling capabilities might be restricted). This is currently not supported; a dial string applies to all subscriberers. Support will be added for per-port control, most likely by adding port masks to the dial plan entry." ::= { zhoneVoipSipDialPlan 2 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1 zhoneVoipSipDialPlanEntry OBJECT-TYPE SYNTAX ZhoneVoipSipDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SIP dial plan table." INDEX { zhoneVoipSipDialPlanId } ::= { zhoneVoipSipDialPlanTable 1 } ZhoneVoipSipDialPlanEntry ::= SEQUENCE { zhoneVoipSipDialPlanId INTEGER, zhoneVoipSipDialString SnmpAdminString, zhoneVoipSipDialIpAddr IpAddress, zhoneVoipSipDialPlanRowStatus ZhoneRowStatus, zhoneVoipSipDialDestName SnmpAdminString, zhoneVoipSipDialNumOfDigits INTEGER, zhoneVoipSipDialPrefixStrip INTEGER, zhoneVoipSipDialPrefixAdd SnmpAdminString, zhoneVoipSipDialPlanType INTEGER, zhoneVoipServerEntryIndex INTEGER, zhoneVoipOverrideInterdigitTimeout Integer32, zhoneVoipSipDialPlanClass BITS, zhoneVoipSipDialPlanDescription SnmpAdminString } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.1 zhoneVoipSipDialPlanId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the dial plan entry." ::= { zhoneVoipSipDialPlanEntry 1 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.2 zhoneVoipSipDialString OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A dial string against which collected digits are matched." ::= { zhoneVoipSipDialPlanEntry 2 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.3 zhoneVoipSipDialIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Upon detecting a match between the collected digits and the dial string for this table entry, this IP address is used for SIP negotiations to initiate the call." ::= { zhoneVoipSipDialPlanEntry 3 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.4 zhoneVoipSipDialPlanRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status is used to create or delete an entry in this table." ::= { zhoneVoipSipDialPlanEntry 4 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.5 zhoneVoipSipDialDestName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the destination for the dial string" ::= { zhoneVoipSipDialPlanEntry 5 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.6 zhoneVoipSipDialNumOfDigits OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of digits to wait for before initiating the call" ::= { zhoneVoipSipDialPlanEntry 6 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.7 zhoneVoipSipDialPrefixStrip OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of prefix digits to strip from dialled digits" ::= { zhoneVoipSipDialPlanEntry 7 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.8 zhoneVoipSipDialPrefixAdd OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "String to be added to the beginning of the dialled digits before call initiation" ::= { zhoneVoipSipDialPlanEntry 8 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.9 zhoneVoipSipDialPlanType OBJECT-TYPE SYNTAX INTEGER { normal(1), callpark(2), esa(3), isdnsig(4), intercom(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "DialPlanType indicates the type of the dial plan. UA has to differenciate between normal dialing and dialing when call features like call park is initiated. The different kinds of dial plan types are: Normal Call Park ESA (Emergency stand alone) isdnsig (ISDN-PRI) Intercom" DEFVAL { normal } ::= { zhoneVoipSipDialPlanEntry 9 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.10 zhoneVoipServerEntryIndex OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "An index to associated voip-server-entry for this sip-dialplan." ::= { zhoneVoipSipDialPlanEntry 10 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.11 zhoneVoipOverrideInterdigitTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter overrides the interdigit timeout in voip-system profile. It indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits. " ::= { zhoneVoipSipDialPlanEntry 11 } -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.12 zhoneVoipSipDialPlanClass OBJECT-TYPE SYNTAX BITS { emergency(0) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is used to configured the dial plan specific features." ::= { zhoneVoipSipDialPlanEntry 12 } -- -- 1.3.6.1.4.1.5504.4.3.4.3.2.1.13 zhoneVoipSipDialPlanDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This field gives details about the sip-dialplan" ::= { zhoneVoipSipDialPlanEntry 13 } -- 1.3.6.1.4.1.5504.4.3.4.4 zhoneVoipHuntGroup OBJECT IDENTIFIER::= { zhoneVoip 4 } -- 1.3.6.1.4.1.5504.4.3.4.4.2 nextZhoneVoipHuntGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the next unused hunt group entry id. " ::= { zhoneVoipHuntGroup 2 } -- 1.3.6.1.4.1.5504.4.3.4.4.3 zhoneVoipHuntGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneVoipHuntGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A hunt groups is defined to map a SIP uniform resource identifier (URI) or dirctory number (DN) to multiple DS0s, to allow a greater number of incoming calls to that URI/DN. A hunt group consists of the following information: - the target DN/URI - the default codec to be used for the call, and - the DS0 ports in the hunt-group. Notes: A URI defined in a subscriber-voice-sip profile cannot also be defined as part of a hunt group. This is enforced by the device. A DS0 must be provisioned in the subVoiceSipTable before that DS0 can be used in a hunt group. This is enforced by the device. A DS0 may be part of more than one hunt group. " ::= { zhoneVoipHuntGroup 3 } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1 zhoneVoipHuntGroupEntry OBJECT-TYPE SYNTAX ZhoneVoipHuntGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hunt group table." INDEX { zhoneVoipHuntGroupId } ::= { zhoneVoipHuntGroupTable 1 } ZhoneVoipHuntGroupEntry ::= SEQUENCE { zhoneVoipHuntGroupId INTEGER, zhoneVoipHuntGroupDestUri SnmpAdminString, zhoneVoipHuntGroupDefaultCodec ZhoneCodecType, zhoneVoipHuntGroupPortMembers BITS, zhoneVoipHuntGroupRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1.1 zhoneVoipHuntGroupId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the hunt group entry." ::= { zhoneVoipHuntGroupEntry 1 } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1.2 zhoneVoipHuntGroupDestUri OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The DN (directory number) or SIP URI (uniform resource identifier) being called. This is the called party from the incoming SIP Invite message." ::= { zhoneVoipHuntGroupEntry 2 } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1.3 zhoneVoipHuntGroupDefaultCodec OBJECT-TYPE SYNTAX ZhoneCodecType MAX-ACCESS read-create STATUS current DESCRIPTION "The default codec to use for a call to a member of this hunt group." DEFVAL { g711mu } ::= { zhoneVoipHuntGroupEntry 3 } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1.4 zhoneVoipHuntGroupPortMembers OBJECT-TYPE SYNTAX BITS { port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates which ports are contained in the hunt group." ::= { zhoneVoipHuntGroupEntry 4 } -- 1.3.6.1.4.1.5504.4.3.4.4.3.1.5 zhoneVoipHuntGroupRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status is used to create or delete an entry in this table." ::= { zhoneVoipHuntGroupEntry 5 } -- 1.3.6.1.4.1.5504.4.3.4.5 zhoneVoipMaliciousCaller OBJECT IDENTIFIER::= { zhoneVoip 5 } -- 1.3.6.1.4.1.5504.4.3.4.5.1 nextVoipMaliciousCallerId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "eturns the next unused malicious caller entry index" ::= { zhoneVoipMaliciousCaller 1 } -- 1.3.6.1.4.1.5504.4.3.4.5.2 zhoneVoipMaliciousCallerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneVoipMaliciousCallerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines a malicious caller whose call will be rejected if enabled. SIP terminal administrator needs to provision URI of this table exactly as it appears in the incoming session notification's(SIP INVITE) calling user's address-of-record(AOR) formatted as a SIP URI. The SIP URI can contain either a telephone number(RFC 2806) or an alphanumeric identification(RFC 2806) Entries in the table are case sensitive, shall not contain visual separations and have the exact length as it appears in the SIP INVITE message " ::= { zhoneVoipMaliciousCaller 2 } -- 1.3.6.1.4.1.5504.4.3.4.5.2.1 zhoneVoipMaliciousCallerEntry OBJECT-TYPE SYNTAX ZhoneVoipMaliciousCallerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the malicious caller table" INDEX { zhoneVoipMaliciousCallerId } ::= { zhoneVoipMaliciousCallerTable 1 } ZhoneVoipMaliciousCallerEntry ::= SEQUENCE { zhoneVoipMaliciousCallerId INTEGER, zhoneVoipMaliciousCallerUri SnmpAdminString, zhoneVoipMaliciousCallerEnable TruthValue, zhoneVoipMaliciousCallerRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.4.3.4.5.2.1.1 zhoneVoipMaliciousCallerId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the malicious call reject entry." ::= { zhoneVoipMaliciousCallerEntry 1 } -- 1.3.6.1.4.1.5504.4.3.4.5.2.1.2 zhoneVoipMaliciousCallerUri OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Incoming call from this URI will be rejected. The network operator is responsible for provisioning exactly as per appearance in the incoming session notification (SIP INVITE) the calling user's address-of-record (AOR) formatted as a SIP URI" ::= { zhoneVoipMaliciousCallerEntry 2 } -- 1.3.6.1.4.1.5504.4.3.4.5.2.1.3 zhoneVoipMaliciousCallerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the incoming call reject is enabled" DEFVAL { true } ::= { zhoneVoipMaliciousCallerEntry 3 } -- 1.3.6.1.4.1.5504.4.3.4.5.2.1.4 zhoneVoipMaliciousCallerRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status is used to create or delete an entry in this table." ::= { zhoneVoipMaliciousCallerEntry 4 } -- 1.3.6.1.4.1.5504.4.3.4.6 zhoneVoipServerCfg OBJECT IDENTIFIER::= { zhoneVoip 6 } -- 1.3.6.1.4.1.5504.4.3.4.6.1 zhoneVoipServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneVoipServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of VOIP Server addresses applicable to each VOIP user agent within the system." ::= { zhoneVoipServerCfg 1 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1 zhoneVoipServerEntry OBJECT-TYPE SYNTAX ZhoneVoipServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry within the table. Indexed by applIndex, which is the slot number, and a user specified unique number." INDEX { applIndex, zhoneVoipServerAddressIndex } ::= { zhoneVoipServerTable 1 } ZhoneVoipServerEntry ::= SEQUENCE { zhoneVoipServerAddressIndex Unsigned32, zhoneVoipServerRowStatus ZhoneRowStatus, zhoneVoipServerAddrType InetAddressType, zhoneVoipServerAddr InetAddress, zhoneVoipServerUdpPortNumber Integer32, zhoneVoipServerId INTEGER, zhoneVoipServerProtocol INTEGER, zhoneVoipServerSendCallProceedingTone TruthValue, zhoneVoipServerRtcpEnabled TruthValue, zhoneVoipServerRtcpPacketInterval Integer32, zhoneVoipServerInterDigitTimeout Integer32, zhoneVoipServerIpTos Integer32, zhoneVoipServerDomainName SnmpAdminString, zhoneVoipServerExpiresInvite Unsigned32, zhoneVoipServerExpiresRegister Unsigned32, zhoneVoipServerHeaderMethod BITS, zhoneVoipServerSessionTimer INTEGER, zhoneVoipServerSessionExpiration Unsigned32, zhoneVoipServerSessionMinSE Unsigned32, zhoneVoipServerSessionCallerReqTimer INTEGER, zhoneVoipServerSessionCalleeReqTimer INTEGER, zhoneVoipServerSessionCallerSpecifyRefresher INTEGER, zhoneVoipServerSessionCalleeSpecifyRefresher INTEGER, zhoneVoipServerDtmfMode INTEGER, zhoneVoipServerBehaviorStringOne OCTET STRING, zhoneVoipServerRtpTermIdSyntax OCTET STRING, zhoneVoipServerRtpDSCP OCTET STRING, zhoneVoipServerSignalingDSCP OCTET STRING, zhoneVoipServerDtmfPayloadId Integer32, zhoneVoipServerRegisterReadyTimeout Unsigned32, zhoneVoipServerMessageRetryCount Integer32, zhoneVoipServerFeatures BITS, zhoneVoipServerTransportProtocol INTEGER, zhoneVoipSigLocalPortNumber Integer32 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.1 zhoneVoipServerAddressIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier of a server address when multiple addresses are configured by the MGCP entity. If one address isn't reachable, then another can be tried." ::= { zhoneVoipServerEntry 1 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.2 zhoneVoipServerRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status is used to create, modify or delete an entry." ::= { zhoneVoipServerEntry 2 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.3 zhoneVoipServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of address contained in the associated instance of sipVoipServerAddr." DEFVAL { ipv4 } ::= { zhoneVoipServerEntry 3 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.4 zhoneVoipServerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the address of a VOIP server this user agent will use to proxy/redirect calls." ::= { zhoneVoipServerEntry 4 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.5 zhoneVoipServerUdpPortNumber OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the UDP Port number for the MGCP Gateway. 2427 is the IANA Registered MGCP Gateway port." DEFVAL { 2427 } ::= { zhoneVoipServerEntry 5 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.6 zhoneVoipServerId OBJECT-TYPE SYNTAX INTEGER { longboard(1), asterisk(2), sipexpressrouter(3), metaswitch(4), sylantro(5), broadsoft(6), ubiquity(7), generalbandwidth(8), tekelec-T6000(9), generic(10), sonus(11), siemens(12), tekelec-T9000(13), lucent-telica(14), nortel-cs2000(15), nuera(16), lucent-imerge(17), coppercom(18), newcross(19), cisco-bts(20), cirpack-utp(21), italtel-issw(22), cisco-pgw(23), microtrol-msk10(24), nortel-dms10(25), verso-clarent-c5cm(26), cedarpoint-safari(27), huawei-softx3000(28), nortel-cs1500(29), taqua-t7000(30), utstarcom-mswitch(31), broadsoft-broadworks(32), broadsoft-m6(33), genband-g9(34), netcentrex(35), genband-g6(36), alu-5060(37), ericsson-apz60(38) } MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the voip server type." DEFVAL { generic } ::= { zhoneVoipServerEntry 6 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.7 zhoneVoipServerProtocol OBJECT-TYPE SYNTAX INTEGER { sip(1), mgcp(2), megaco(3), ncs(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol). " DEFVAL { sip } ::= { zhoneVoipServerEntry 7 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.8 zhoneVoipServerSendCallProceedingTone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "ndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch." DEFVAL { false } ::= { zhoneVoipServerEntry 8 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.9 zhoneVoipServerRtcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the Real-Time Control Protocol is enabled for the device. " DEFVAL { false } ::= { zhoneVoipServerEntry 9 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.10 zhoneVoipServerRtcpPacketInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled." DEFVAL { 5000 } ::= { zhoneVoipServerEntry 10 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.11 zhoneVoipServerInterDigitTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits. " DEFVAL { 10 } ::= { zhoneVoipServerEntry 11 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.12 zhoneVoipServerIpTos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates the tos value that is set in the ip header for voice of ip traffic." DEFVAL { 0 } ::= { zhoneVoipServerEntry 12 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.13 zhoneVoipServerDomainName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates the Universal Resource Identifier (URI) of the system." ::= { zhoneVoipServerEntry 13 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.14 zhoneVoipServerExpiresInvite OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "For user agent clients, this value is inserted into the Expires header. For proxy servers, if a received request contained an Expires header, then the value in the header takes precedence." ::= { zhoneVoipServerEntry 14 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.15 zhoneVoipServerExpiresRegister OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "For user agent clients, this value is inserted into the Expires header. For registrar servers, if a received request contained an Expires header, then the value in the header takes precedence." ::= { zhoneVoipServerEntry 15 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.16 zhoneVoipServerHeaderMethod OBJECT-TYPE SYNTAX BITS { invite(0), register(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This convention is a bit map. Each bit represents a SIP method where the Expires header should be included. If a bit has value 1, then the requests corresponding to that SIP method must include an Expires header line. If a bit has value 0, then the Expires header line will not be added. Combinations of bits can be set when the Expires header line is required in multiple SIP methods. bit 0 : INVITE method. bit 1 : REGISTER Method." ::= { zhoneVoipServerEntry 16 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.17 zhoneVoipServerSessionTimer OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Support session timers on : Session timers are supported, and SIP messages will have a 'Supported: timer' header off: Session timers are NOT supported, and SIP messages will NOT have a 'Supported: timer' header" DEFVAL { off } ::= { zhoneVoipServerEntry 17 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.18 zhoneVoipServerSessionExpiration OBJECT-TYPE SYNTAX Unsigned32 (90..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time at which an element (proxy, UAC, UAS) will consider the SIP session timed out, if no successful session refresh transaction occurs beforehand." DEFVAL { 180 } ::= { zhoneVoipServerEntry 18 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.19 zhoneVoipServerSessionMinSE OBJECT-TYPE SYNTAX Unsigned32 (90..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Because of the processing load of mid-dialog requests, all elements (proxy, UAC, UAS) can have configured minimum value for the session interval that they are willing to accept." DEFVAL { 180 } ::= { zhoneVoipServerEntry 19 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.20 zhoneVoipServerSessionCallerReqTimer OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This field specifies the caller's action yes: Caller (UAC) will request for timer when making outbound calls no : Caller (UAC) will NOT request for timer when making outbound calls" DEFVAL { no } ::= { zhoneVoipServerEntry 20 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.21 zhoneVoipServerSessionCalleeReqTimer OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When caller supports timer but did not request one this field specifies the callee's action yes: Callee (UAS) will request for timer no : Callee (UAS) will NOT request for timer" DEFVAL { no } ::= { zhoneVoipServerEntry 21 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.22 zhoneVoipServerSessionCallerSpecifyRefresher OBJECT-TYPE SYNTAX INTEGER { uac(1), uas(2), omit(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Caller specifies the refresher: UAC : Caller specifies itself (UAC) as the refresher UAS : Caller specifies the callee (UAS) as the refresher Omit: Caller does NOT explicitly specify the refresher" DEFVAL { omit } ::= { zhoneVoipServerEntry 22 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.23 zhoneVoipServerSessionCalleeSpecifyRefresher OBJECT-TYPE SYNTAX INTEGER { uac(1), uas(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When UAC did not specify refresher tag, callee specifies the refresher: UAC : Callee specifies the caller (UAC) as the refresher UAS : Callee specifies itself (UAS) as the refresher" DEFVAL { uac } ::= { zhoneVoipServerEntry 23 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.24 zhoneVoipServerDtmfMode OBJECT-TYPE SYNTAX INTEGER { inband(1), rfc2833(2), rfc2833only(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether dtmf digits are to be passed as codec voice packets or special separate packets (rfc2833). " DEFVAL { rfc2833 } ::= { zhoneVoipServerEntry 24 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.25 zhoneVoipServerBehaviorStringOne OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) UNITS "characters" MAX-ACCESS read-only STATUS current DESCRIPTION "This field is used to control any switch specific behavior of the VOIP Gateway." DEFVAL { "" } ::= { zhoneVoipServerEntry 25 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.26 zhoneVoipServerRtpTermIdSyntax OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..96)) UNITS "characters" MAX-ACCESS read-write STATUS current DESCRIPTION "This field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid format, eg %eid . This field is supported only for the Megaco protocol for all other protocols this field will be initialized to NULL. If the protocol is megaco and the field is NULL, Ephemeral term id will be updated to default syntax of the server Id given. If the server Id is not provisioned with the default id then field will be updated to NULL. " DEFVAL { "" } ::= { zhoneVoipServerEntry 26 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.27 zhoneVoipServerRtpDSCP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for voip's rtp traffic. NOTE:zhoneVoipServerIpTos field must be zero before entering a new value into this field. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " ::= { zhoneVoipServerEntry 27 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.28 zhoneVoipServerSignalingDSCP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for voip's signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " ::= { zhoneVoipServerEntry 28 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.29 zhoneVoipServerDtmfPayloadId OBJECT-TYPE SYNTAX Integer32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." DEFVAL { 101 } ::= { zhoneVoipServerEntry 29 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.30 zhoneVoipServerRegisterReadyTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "For Megaco Service change Messages this value will be used in service-change-delay." DEFVAL { 10 } ::= { zhoneVoipServerEntry 30 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.31 zhoneVoipServerMessageRetryCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "This field specifies the number of retries of SIP message to every DNS resolved server IP addresses. The default behaviour means that the SIP message will be retransmitted to the first DNS resolved IP address once and the remaining retransmissions will be to the second DNS resolved IP address. The default value of zero or DNS resolved to a single IP address means that the default behaviour will take effect" DEFVAL { 1 } ::= { zhoneVoipServerEntry 31 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.32 zhoneVoipServerFeatures OBJECT-TYPE SYNTAX BITS { sip-outbound(0), gruu(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set of features can be enabled for voip server Bit Feature --- -------- 1 sip outbound 2 gruu" ::= { zhoneVoipServerEntry 32 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.33 zhoneVoipServerTransportProtocol OBJECT-TYPE SYNTAX INTEGER { udp(1), tcp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This field specifies type of transport protocol configured. Possible values are udp and tcp." DEFVAL { udp } ::= { zhoneVoipServerEntry 33 } -- 1.3.6.1.4.1.5504.4.3.4.6.1.1.34 zhoneVoipSigLocalPortNumber OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This field specifies signalling local port number, used when tcp is configured as tranport protocol." DEFVAL { 5060 } ::= { zhoneVoipServerEntry 34 } END -- -- comVoip.mib --