TRAPEZE-NETWORKS-AP-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB TrpzApNum, TrpzApAttachType, TrpzApSerialNum, TrpzApFingerprint, TrpzApBias, TrpzApRadioIndex, TrpzRadioMode, TrpzRadioType, TrpzPowerLevel, TrpzChannelNum, TrpzRadioChannelWidth, TrpzApPowerMode, TrpzRadioAntennaLocation, TrpzApLedMode FROM TRAPEZE-NETWORKS-AP-TC TrpzSyslogSeverity FROM TRAPEZE-NETWORKS-EXTERNAL-SERVER-TC TrpzPhysPortNumberOrZero FROM TRAPEZE-NETWORKS-BASIC-TC trpzMibs FROM TRAPEZE-NETWORKS-ROOT-MIB; trpzApConfigMib MODULE-IDENTITY LAST-UPDATED "201306210324Z" ORGANIZATION "Trapeze Networks" CONTACT-INFO "Trapeze Networks Technical Support www.trapezenetworks.com US: 866.TRPZ.TAC International: 925.474.2400 support@trapezenetworks.com" DESCRIPTION "AP Configuration objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009-2013 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201306210324Z" DESCRIPTION "v3.2.4: Obsoleted two objects (not supported anymore): trpzApConfRadioConfigAutoTuneMaxTxPower, trpzApConfApTemRadioConfAutoTuneMaxTxPower. (for 9.0 release)" REVISION "201212210323Z" DESCRIPTION "v3.2.3: New backup SSID mode (enum value in TrpzBackupSsidMode): 'always-on(4)'. Added seven columnar objects: trpzApConfApConfigCacheConfigEnabled, trpzApConfRemoteSiteAcPollingEnabled, trpzApConfRemoteSiteRadiusServerGroupName, trpzApConfRemoteSiteRadiusDeadtime, trpzApConfRemoteSiteRadiusTimeout, trpzApConfRemoteSiteRadiusRetransmit, trpzApConfRemoteSiteRadiusNasIdType; and one related TC: TrpzApRadiusNasIdType. (for 9.0 release)" REVISION "201210160322Z" DESCRIPTION "v3.2.2: Added three tables: trpzApConfRadioProfile32Table, trpzApConfRadioProf32ServiceProfileTable, trpzApConfRadioProf32SnoopFilterTable; in order to replace: trpzApConfRadioProfileTable, trpzApConfRadioProfServiceProfileTable, trpzApConfRadioProfSnoopFilterTable; three columnar objects: trpzApConfApConfigApName2, trpzApConfRadioConfigRadioProfileName2, trpzApConfApTemRadioConfRadioProfileName2; in order to replace: trpzApConfApConfigApName, trpzApConfRadioConfigRadioProfileName, trpzApConfApTemRadioConfRadioProfileName; a columnar object in the deprecated Radio Profile table, to indicate the corresponding entry in the new table: trpzApConfRadioProfRadioProfileFullName; and a related TC: TrpzRadioProfileName32; in order to replace: TrpzRadioProfileName. (for 9.0 release)" REVISION "201208060313Z" DESCRIPTION "v3.1.3: Obsoleted five objects (not supported anymore): trpzApConfRadioProfAutoTune11aChannelRange, trpzApConfRadioProfAutoTuneIgnoreClientsEnabled, trpzApConfRadioProfAutoTuneChannelEnabled, trpzApConfRadioProfAutoTuneChannelHolddownInterval, trpzApConfRadioProfAutoTuneChannelChangeInterval; and a related TC: TrpzRadioProfileAutoTuneChannelRange. (for 8.0 release)" REVISION "201208050302Z" DESCRIPTION "v3.0.2: Updated the description of trpzApConfServProfM2UConversionEnabled to reflect the fact that multicast to unicast conversion is performed for all multicast IPv4 traffic, not just video traffic. This will be published in 7.7 MR2 release." REVISION "201203080301Z" DESCRIPTION "v3.0.1: Added three tables: trpzApConfRadioSnoopFilterTable, trpzApConfSnoopObserverTable, trpzApConfRemoteSiteTable; ten columnar objects: trpzApConfApConfigRemoteSiteName, trpzApConfApConfigPathMtu, trpzApConfApConfigHighLatencyModeEnabled, trpzApConfServProfBackupSsidMode, trpzApConfServProfBackupSsidTimeout, trpzApConfServProfBackupSsidKeepClients, trpzApConfServProfM2UConversionEnabled, trpzApConfServProfWebPortalLogoutForm, trpzApConfSnoopFilterObserverAddrType, trpzApConfSnoopFilterObserverAddr; and two related TCs: TrpzBackupSsidMode, TrpzSnoopObserverTxMode. (for 7.7 release)" REVISION "201102030200Z" DESCRIPTION "v2.0.0: Added 11 objects and related TCs: trpzApConfApConfigLldpMode, trpzApConfApConfigLldpMedEnabled, trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected, trpzApConfApConfigLldpMedInventoryTlvSelected, trpzApConfApConfigApTunnelEnabled, trpzApConfApConfigDataSecurityEnabled, trpzApConfApConfigWanOutageModeEnabled, trpzApConfApConfigWanOutageExtendedTimeout, trpzApConfApConfigWanOutageEvaluationPeriod, trpzApConfRadioProfRFSpectralScanModeEnabled, trpzApConfRadioProfRFSpectralScanPriority. Obsoleted four objects (not supported anymore): trpzApConfServProfWpaIeCipherWep40Enabled, trpzApConfServProfWpaIeCipherWep104Enabled, trpzApConfServProfRsnIeCipherWep40Enabled, trpzApConfServProfRsnIeCipherWep104Enabled. (for 7.5 release)" REVISION "201003050121Z" DESCRIPTION "v1.2.1: made a few objects writable: trpzApConfRadioProfBeaconInterval, trpzApConfRadioProfRtsThreshold, trpzApConfRadioProfFragThreshold (for 7.5 release)" REVISION "200911190108Z" DESCRIPTION "v1.0.8: Initial version, for 7.1 release" ::= { trpzMibs 14 } -- Textual conventions TrpzApTemplateName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "AP Template Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..32)) TrpzRadioProfileName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS deprecated DESCRIPTION "Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7e (~) with no leading, embedded, or trailing space. Cannot be a zero length string. Deprecated by TrpzRadioProfileName32, which allows Radio Profile Names up to 32 characters long. Radio Profile Names longer than 16 characters will be truncated, last four characters will be replaced by tilde (~) and three digits. Example: '12345678901234567890' will appear as '123456789012~001' '12345678901234569999' will appear as '123456789012~002' etc. In case of a name collision, for example if '123456789012~002' is the full name of another Radio Profile, the next available three-digit suffix will be used: '12345678901234569999' will appear as '123456789012~003' instead." SYNTAX OCTET STRING (SIZE (1..16)) TrpzServiceProfileName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Service Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..32)) TrpzSnoopFilterName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Snoop Filter Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..15)) TrpzServiceProfileSsidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Service Types provided on a service profile." SYNTAX INTEGER { clear (1), crypto (2) } TrpzServiceProfile11nMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n modes for a service profile." SYNTAX INTEGER { enable (1), disable (2), required (3) } TrpzServiceProfile11nFrameAggregationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n frame aggregation types for a service profile." SYNTAX INTEGER { msdu (1), mpdu (2), all (3), disable (4) } TrpzServiceProfile11nMsduMaxLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n A-MSDU maximum lengths for a service profile." SYNTAX INTEGER { msdu-4k (1), msdu-8k (2) } TrpzServiceProfile11nMpduMaxLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n A-MPDU maximum lengths for a service profile." SYNTAX INTEGER { mpdu-8k (1), mpdu-16k (2), mpdu-32k (3), mpdu-64k (4) } TrpzServiceProfileAuthFallthruType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Authentication Fallthrough types for a service profile." SYNTAX INTEGER { none (1), web-auth (2), web-aaa-portal (3), last-resort (4) } TrpzServiceProfileCacMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Call Admission Control types for a service profile." SYNTAX INTEGER { none (1), session (2), vendor (3) } TrpzRadioProfileCountermeasuresMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the Countermeasure modes for a radio profile." SYNTAX INTEGER { none (1), all (2), rogue (3), configured (4) } TrpzRadioProfileRFScanChannelScope ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of RF scanning channel scopes for a radio profile." SYNTAX INTEGER { operating (1), regulatory (2), all (3) } TrpzRadioProfileAutoTuneChannelRange ::= TEXTUAL-CONVENTION STATUS obsolete DESCRIPTION "Enumeration of Auto-Tune channel ranges for a radio profile. Obsoleted: not supported anymore." SYNTAX INTEGER { all-bands (1), lower-bands (2) } TrpzRadioProfileRFScanMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of RF scanning modes for a radio profile." SYNTAX INTEGER { active (1), passive (2) } TrpzApLldpMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of LLDP modes for an AP." SYNTAX INTEGER { disabled (1), tx (2) } TrpzRadioProfileRFSpectralScanPriority ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Spectral Scan Priorities for a radio profile." SYNTAX INTEGER { data-first (1), scan-first (2) } TrpzBackupSsidMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of remote-site backup SSID modes." SYNTAX INTEGER { disabled (1), outage-only (2), dual (3), always-on (4) } TrpzSnoopObserverTxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of transmission modes for snoop packets." SYNTAX INTEGER { tzsp (1), batched-tzsp (2) } TrpzRadioProfileName32 ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7e (~) with no leading, embedded, or trailing space. Cannot be a zero length string. Deprecates TrpzRadioProfileName." SYNTAX OCTET STRING (SIZE (1..32)) TrpzApRadiusNasIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of NAS-ID values for the RADIUS server group of a remote site." SYNTAX INTEGER { ap-name (1), ap-serial-id (2) } -- -- The AP Config MIB Tree -- trpzApConfigMibObjects OBJECT IDENTIFIER ::= { trpzApConfigMib 1 } -- Reserved for future scalar objects (high-level configuration info): -- trpzApConfigGlobalObjects OBJECT IDENTIFIER ::= { trpzApConfigMibObjects 1 } -- Object definitions -- ================================== -- AP Config table trpzApConfApConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing all the APs currently configured on this AC." ::= { trpzApConfigMibObjects 2 } trpzApConfApConfigEntry OBJECT-TYPE SYNTAX TrpzApConfApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular AP that could be attached to the AC." INDEX { trpzApConfApConfigApNum } ::= { trpzApConfApConfigTable 1 } TrpzApConfApConfigEntry ::= SEQUENCE { trpzApConfApConfigApNum TrpzApNum, trpzApConfApConfigApAttachType TrpzApAttachType, trpzApConfApConfigPhysPortNum TrpzPhysPortNumberOrZero, trpzApConfApConfigApSerialNum TrpzApSerialNum, trpzApConfApConfigApModelName DisplayString, trpzApConfApConfigFingerprint TrpzApFingerprint, trpzApConfApConfigBias TrpzApBias, trpzApConfApConfigApTimeout Unsigned32, trpzApConfApConfigApName DisplayString, trpzApConfApConfigContact DisplayString, trpzApConfApConfigLocation DisplayString, trpzApConfApConfigBlinkEnabled TruthValue, trpzApConfApConfigForceImageDownloadEnabled TruthValue, trpzApConfApConfigFirmwareUpgradeEnabled TruthValue, trpzApConfApConfigLocalSwitchingEnabled TruthValue, trpzApConfApConfigPowerMode TrpzApPowerMode, trpzApConfApConfigLedMode TrpzApLedMode, trpzApConfApConfigDescription DisplayString, trpzApConfApConfigLldpMode TrpzApLldpMode, trpzApConfApConfigLldpMedEnabled TruthValue, trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected TruthValue, trpzApConfApConfigLldpMedInventoryTlvSelected TruthValue, trpzApConfApConfigApTunnelEnabled TruthValue, trpzApConfApConfigDataSecurityEnabled TruthValue, trpzApConfApConfigWanOutageModeEnabled TruthValue, trpzApConfApConfigWanOutageExtendedTimeout Unsigned32, trpzApConfApConfigWanOutageEvaluationPeriod Unsigned32, trpzApConfApConfigRemoteSiteName DisplayString, trpzApConfApConfigPathMtu Unsigned32, trpzApConfApConfigHighLatencyModeEnabled TruthValue, trpzApConfApConfigApName2 DisplayString, trpzApConfApConfigCacheConfigEnabled TruthValue } trpzApConfApConfigApNum OBJECT-TYPE SYNTAX TrpzApNum MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Number of this AP (administratively assigned)." ::= { trpzApConfApConfigEntry 1 } trpzApConfApConfigApAttachType OBJECT-TYPE SYNTAX TrpzApAttachType MAX-ACCESS read-only STATUS current DESCRIPTION "How this AP is attached to the AC (directly or via L2/L3 network)." ::= { trpzApConfApConfigEntry 2 } trpzApConfApConfigPhysPortNum OBJECT-TYPE SYNTAX TrpzPhysPortNumberOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero." ::= { trpzApConfApConfigEntry 3 } trpzApConfApConfigApSerialNum OBJECT-TYPE SYNTAX TrpzApSerialNum MAX-ACCESS read-only STATUS current DESCRIPTION "The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string." ::= { trpzApConfApConfigEntry 4 } trpzApConfApConfigApModelName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Model name of this AP." ::= { trpzApConfApConfigEntry 5 } trpzApConfApConfigFingerprint OBJECT-TYPE SYNTAX TrpzApFingerprint MAX-ACCESS read-only STATUS current DESCRIPTION "The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string." ::= { trpzApConfApConfigEntry 6 } trpzApConfApConfigBias OBJECT-TYPE SYNTAX TrpzApBias MAX-ACCESS read-only STATUS current DESCRIPTION "Bias (high/low/sticky)." ::= { trpzApConfApConfigEntry 7 } trpzApConfApConfigApTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The communication timeout for this AP, in seconds." ::= { trpzApConfApConfigEntry 8 } trpzApConfApConfigApName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The configured Name for this AP. Names longer than 16 characters will be truncated (example: 'APNamelongerthan16chars' will be shown as 'APNamelongertha~'). Deprecated by trpzApConfApConfigApName2, which allows AP Names longer than 16 characters." ::= { trpzApConfApConfigEntry 9 } trpzApConfApConfigContact OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Contact information for this AP." ::= { trpzApConfApConfigEntry 10 } trpzApConfApConfigLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Location information for this AP." ::= { trpzApConfApConfigEntry 11 } trpzApConfApConfigBlinkEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LED blink mode is enabled on this AP." ::= { trpzApConfApConfigEntry 12 } trpzApConfApConfigForceImageDownloadEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP is forced to always download an image from the AC upon boot." ::= { trpzApConfApConfigEntry 13 } trpzApConfApConfigFirmwareUpgradeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether automatic boot firmware upgrade is enabled on this AP." ::= { trpzApConfApConfigEntry 14 } trpzApConfApConfigLocalSwitchingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether local switching is enabled on this AP." ::= { trpzApConfApConfigEntry 15 } trpzApConfApConfigPowerMode OBJECT-TYPE SYNTAX TrpzApPowerMode MAX-ACCESS read-only STATUS current DESCRIPTION "The mode in which this AP is supplying power to its radios." ::= { trpzApConfApConfigEntry 16 } trpzApConfApConfigLedMode OBJECT-TYPE SYNTAX TrpzApLedMode MAX-ACCESS read-only STATUS current DESCRIPTION "LED Mode (auto/static/off)." ::= { trpzApConfApConfigEntry 17 } trpzApConfApConfigDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Description for this AP." ::= { trpzApConfApConfigEntry 18 } trpzApConfApConfigLldpMode OBJECT-TYPE SYNTAX TrpzApLldpMode MAX-ACCESS read-only STATUS current DESCRIPTION "LLDP Mode (tx/disabled)." ::= { trpzApConfApConfigEntry 19 } trpzApConfApConfigLldpMedEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether LLDP-MED is enabled for this AP." ::= { trpzApConfApConfigEntry 20 } trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether LLDP-MED Extended Power via MDI TLV is selected for this AP." ::= { trpzApConfApConfigEntry 21 } trpzApConfApConfigLldpMedInventoryTlvSelected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether LLDP-MED Inventory TLV is selected for this AP." ::= { trpzApConfApConfigEntry 22 } trpzApConfApConfigApTunnelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether AP to AP tunnels are enabled for this AP." ::= { trpzApConfApConfigEntry 23 } trpzApConfApConfigDataSecurityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Data Security is enabled for this AP." ::= { trpzApConfApConfigEntry 24 } trpzApConfApConfigWanOutageModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WAN Outage (remote) Mode is enabled for this AP." ::= { trpzApConfApConfigEntry 25 } trpzApConfApConfigWanOutageExtendedTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The duration for which the AP can stay in WAN outage mode, in hours. A value of zero means the AP can stay in outage mode indefinitely." ::= { trpzApConfApConfigEntry 26 } trpzApConfApConfigWanOutageEvaluationPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The AC connection Evaluation Period for APs in WAN Outage mode, in seconds." ::= { trpzApConfApConfigEntry 27 } trpzApConfApConfigRemoteSiteName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the remote site that the AP is part of. An empty string means that the AP is not part of any remote site." ::= { trpzApConfApConfigEntry 28 } trpzApConfApConfigPathMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Maximum Transmission Unit (in bytes) for communication between AP and AC. The value 0 means that the MTU was not administratively configured." ::= { trpzApConfApConfigEntry 29 } trpzApConfApConfigHighLatencyModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the high-latency mode is enabled for the AP." ::= { trpzApConfApConfigEntry 30 } trpzApConfApConfigApName2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Name for this AP; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). Deprecates trpzApConfApConfigApName." ::= { trpzApConfApConfigEntry 31 } trpzApConfApConfigCacheConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the configuration of the AP is saved on the AP itself, so that it won't be lost after reboot. To enable this setting, the AP must have outage mode enabled." ::= { trpzApConfApConfigEntry 32 } -- ================================== -- Radio Config table trpzApConfRadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the radios on all the APs currently configured on this AC." ::= { trpzApConfigMibObjects 3 } trpzApConfRadioConfigEntry OBJECT-TYPE SYNTAX TrpzApConfRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Radio on a particular AP that could be attached to the AC." INDEX { trpzApConfRadioConfigApNum, trpzApConfRadioConfigRadioIndex } ::= { trpzApConfRadioConfigTable 1 } TrpzApConfRadioConfigEntry ::= SEQUENCE { trpzApConfRadioConfigApNum TrpzApNum, trpzApConfRadioConfigRadioIndex TrpzApRadioIndex, trpzApConfRadioConfigRadioType TrpzRadioType, trpzApConfRadioConfigRadioMode TrpzRadioMode, trpzApConfRadioConfigRadioProfileName TrpzRadioProfileName, trpzApConfRadioConfigChannel TrpzChannelNum, trpzApConfRadioConfigTxPower TrpzPowerLevel, trpzApConfRadioConfigAutoTuneMaxTxPower TrpzPowerLevel, trpzApConfRadioConfigAntennaType DisplayString, trpzApConfRadioConfigAntennaLocation TrpzRadioAntennaLocation, trpzApConfRadioConfigLoadBalancingEnabled TruthValue, trpzApConfRadioConfigLoadBalancingGroup DisplayString, trpzApConfRadioConfigLoadRebalancingEnabled TruthValue, trpzApConfRadioConfigRadioProfileName2 DisplayString } trpzApConfRadioConfigApNum OBJECT-TYPE SYNTAX TrpzApNum MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Number of the AP (administratively assigned)." ::= { trpzApConfRadioConfigEntry 1 } trpzApConfRadioConfigRadioIndex OBJECT-TYPE SYNTAX TrpzApRadioIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this Radio on the AP." ::= { trpzApConfRadioConfigEntry 2 } trpzApConfRadioConfigRadioType OBJECT-TYPE SYNTAX TrpzRadioType MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG)" ::= { trpzApConfRadioConfigEntry 3 } trpzApConfRadioConfigRadioMode OBJECT-TYPE SYNTAX TrpzRadioMode MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Mode of this radio (enabled/disabled/sentry)" ::= { trpzApConfRadioConfigEntry 4 } trpzApConfRadioConfigRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Identifies the Radio Profile to be applied this radio, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfRadioConfigRadioProfileName2, which allows Radio Profile Names longer than 16 characters." ::= { trpzApConfRadioConfigEntry 5 } trpzApConfRadioConfigChannel OBJECT-TYPE SYNTAX TrpzChannelNum MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Channel Number of this radio." ::= { trpzApConfRadioConfigEntry 6 } trpzApConfRadioConfigTxPower OBJECT-TYPE SYNTAX TrpzPowerLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Tx Power level of this radio." ::= { trpzApConfRadioConfigEntry 7 } trpzApConfRadioConfigAutoTuneMaxTxPower OBJECT-TYPE SYNTAX TrpzPowerLevel MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The Maximum Tx Power that Auto Tune is allowed to set for this radio. Obsoleted: not supported anymore." ::= { trpzApConfRadioConfigEntry 8 } trpzApConfRadioConfigAntennaType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Antenna Type for this radio." ::= { trpzApConfRadioConfigEntry 9 } trpzApConfRadioConfigAntennaLocation OBJECT-TYPE SYNTAX TrpzRadioAntennaLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Antenna Location for this radio." ::= { trpzApConfRadioConfigEntry 10 } trpzApConfRadioConfigLoadBalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Balancing is enabled on this radio." ::= { trpzApConfRadioConfigEntry 11 } trpzApConfRadioConfigLoadBalancingGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RF Load Balancing group that this radio is assigned to." ::= { trpzApConfRadioConfigEntry 12 } trpzApConfRadioConfigLoadRebalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Rebalancing is enabled for this radio." ::= { trpzApConfRadioConfigEntry 13 } trpzApConfRadioConfigRadioProfileName2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Radio Profile to be applied to this radio. Deprecates trpzApConfRadioConfigRadioProfileName." ::= { trpzApConfRadioConfigEntry 14 } -- ========================================================== -- AP Template main Config table (similar to AP Config table) trpzApConfApTemplateConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfApTemplateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing all the AP Templates currently configured on this AC." ::= { trpzApConfigMibObjects 4 } trpzApConfApTemplateConfigEntry OBJECT-TYPE SYNTAX TrpzApConfApTemplateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Template configuration for APs that could be attached to the AC." INDEX { trpzApConfApTemplConfApTemplateName } ::= { trpzApConfApTemplateConfigTable 1 } TrpzApConfApTemplateConfigEntry ::= SEQUENCE { trpzApConfApTemplConfApTemplateName TrpzApTemplateName, trpzApConfApTemplConfApTemplateEnabled TruthValue, trpzApConfApTemplConfBias TrpzApBias, trpzApConfApTemplConfApTimeout Unsigned32, trpzApConfApTemplConfBlinkEnabled TruthValue, trpzApConfApTemplConfForceImageDownloadEnabled TruthValue, trpzApConfApTemplConfFirmwareUpgradeEnabled TruthValue, trpzApConfApTemplConfLocalSwitchingEnabled TruthValue, trpzApConfApTemplConfPowerMode TrpzApPowerMode, trpzApConfApTemplConfLedMode TrpzApLedMode } trpzApConfApTemplConfApTemplateName OBJECT-TYPE SYNTAX TrpzApTemplateName MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Template Name." ::= { trpzApConfApTemplateConfigEntry 1 } trpzApConfApTemplConfApTemplateEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP Template is Enabled (can be used for bringing up APs)." ::= { trpzApConfApTemplateConfigEntry 2 } trpzApConfApTemplConfBias OBJECT-TYPE SYNTAX TrpzApBias MAX-ACCESS read-only STATUS current DESCRIPTION "Bias (high/low/sticky)." ::= { trpzApConfApTemplateConfigEntry 3 } trpzApConfApTemplConfApTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The communication timeout for this AP Template, in seconds." ::= { trpzApConfApTemplateConfigEntry 4 } trpzApConfApTemplConfBlinkEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LED blink mode is enabled on this AP Template." ::= { trpzApConfApTemplateConfigEntry 5 } trpzApConfApTemplConfForceImageDownloadEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP is forced to always download an image from the AC upon boot." ::= { trpzApConfApTemplateConfigEntry 6 } trpzApConfApTemplConfFirmwareUpgradeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether automatic boot firmware upgrade is enabled on this AP Template." ::= { trpzApConfApTemplateConfigEntry 7 } trpzApConfApTemplConfLocalSwitchingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether local switching is enabled on this AP Template." ::= { trpzApConfApTemplateConfigEntry 8 } trpzApConfApTemplConfPowerMode OBJECT-TYPE SYNTAX TrpzApPowerMode MAX-ACCESS read-only STATUS current DESCRIPTION "The mode in which an AP using this Template will be supplying power to its radios." ::= { trpzApConfApTemplateConfigEntry 9 } trpzApConfApTemplConfLedMode OBJECT-TYPE SYNTAX TrpzApLedMode MAX-ACCESS read-only STATUS current DESCRIPTION "The LED Mode (auto/static/off) for an AP using this Template." ::= { trpzApConfApTemplateConfigEntry 10 } -- ============================================================== -- AP Template Radio Config table (similar to Radio Config table) trpzApConfApTemplateRadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfApTemplateRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the radios for all the AP Templates currently configured on this AC." ::= { trpzApConfigMibObjects 5 } trpzApConfApTemplateRadioConfigEntry OBJECT-TYPE SYNTAX TrpzApConfApTemplateRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Template configuration for a particular Radio index on an AP Template configured on this AC." INDEX { trpzApConfApTemRadioConfApTemplateName, trpzApConfApTemRadioConfRadioIndex } ::= { trpzApConfApTemplateRadioConfigTable 1 } TrpzApConfApTemplateRadioConfigEntry ::= SEQUENCE { trpzApConfApTemRadioConfApTemplateName TrpzApTemplateName, trpzApConfApTemRadioConfRadioIndex TrpzApRadioIndex, trpzApConfApTemRadioConfRadioMode TrpzRadioMode, trpzApConfApTemRadioConfRadioProfileName TrpzRadioProfileName, trpzApConfApTemRadioConfAutoTuneMaxTxPower TrpzPowerLevel, trpzApConfApTemRadioConfLoadBalancingEnabled TruthValue, trpzApConfApTemRadioConfLoadBalancingGroup DisplayString, trpzApConfApTemRadioConfLoadRebalancingEnabled TruthValue, trpzApConfApTemRadioConfRadioProfileName2 DisplayString } trpzApConfApTemRadioConfApTemplateName OBJECT-TYPE SYNTAX TrpzApTemplateName MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Template Name." ::= { trpzApConfApTemplateRadioConfigEntry 1 } trpzApConfApTemRadioConfRadioIndex OBJECT-TYPE SYNTAX TrpzApRadioIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this Radio on the AP Template." ::= { trpzApConfApTemplateRadioConfigEntry 2 } trpzApConfApTemRadioConfRadioMode OBJECT-TYPE SYNTAX TrpzRadioMode MAX-ACCESS read-only STATUS current DESCRIPTION "The configured mode of a radio using this Template (enabled/disabled/sentry)" ::= { trpzApConfApTemplateRadioConfigEntry 3 } trpzApConfApTemRadioConfRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Identifies the Radio Profile to be applied to a radio using this Template, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfApTemRadioConfRadioProfileName2, which allows Radio Profile Names longer than 16 characters." ::= { trpzApConfApTemplateRadioConfigEntry 4 } trpzApConfApTemRadioConfAutoTuneMaxTxPower OBJECT-TYPE SYNTAX TrpzPowerLevel MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template. Obsoleted: not supported anymore." ::= { trpzApConfApTemplateRadioConfigEntry 5 } trpzApConfApTemRadioConfLoadBalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Balancing will be enabled on a radio using this Template." ::= { trpzApConfApTemplateRadioConfigEntry 6 } trpzApConfApTemRadioConfLoadBalancingGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RF Load Balancing group that a radio using this Template will be assigned to." ::= { trpzApConfApTemplateRadioConfigEntry 7 } trpzApConfApTemRadioConfLoadRebalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Rebalancing will be enabled for a radio using this Template." ::= { trpzApConfApTemplateRadioConfigEntry 8 } trpzApConfApTemRadioConfRadioProfileName2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Radio Profile to be applied to a radio using this Template. Deprecates trpzApConfApTemRadioConfRadioProfileName." ::= { trpzApConfApTemplateRadioConfigEntry 9 } -- ========================== -- Radio Profile table trpzApConfRadioProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table describing the Radio Profiles currently configured on this AC. Deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfigMibObjects 6 } trpzApConfRadioProfileEntry OBJECT-TYPE SYNTAX TrpzApConfRadioProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Configuration for a particular Radio Profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." INDEX { trpzApConfRadioProfRadioProfileName } ::= { trpzApConfRadioProfileTable 1 } TrpzApConfRadioProfileEntry ::= SEQUENCE { trpzApConfRadioProfRadioProfileName TrpzRadioProfileName, trpzApConfRadioProfBeaconInterval Unsigned32, trpzApConfRadioProfDtimInterval Unsigned32, trpzApConfRadioProfChannelWidth11na TrpzRadioChannelWidth, trpzApConfRadioProfMaxTxLifetime Unsigned32, trpzApConfRadioProfMaxRxLifetime Unsigned32, trpzApConfRadioProfRtsThreshold Unsigned32, trpzApConfRadioProfFragThreshold Unsigned32, trpzApConfRadioProfLongXmitPreambleEnabled TruthValue, trpzApConfRadioProfCountermeasuresMode TrpzRadioProfileCountermeasuresMode, trpzApConfRadioProfRFScanMode TrpzRadioProfileRFScanMode, trpzApConfRadioProfRFScanChannelScope TrpzRadioProfileRFScanChannelScope, trpzApConfRadioProfRFScanCTSEnabled TruthValue, trpzApConfRadioProfAutoTune11aChannelRange TrpzRadioProfileAutoTuneChannelRange, trpzApConfRadioProfAutoTuneIgnoreClientsEnabled TruthValue, trpzApConfRadioProfAutoTuneChannelEnabled TruthValue, trpzApConfRadioProfAutoTuneChannelHolddownInterval Unsigned32, trpzApConfRadioProfAutoTuneChannelChangeInterval Unsigned32, trpzApConfRadioProfAutoTunePowerEnabled TruthValue, trpzApConfRadioProfAutoTunePowerRampInterval Unsigned32, trpzApConfRadioProfAutoTunePowerChangeInterval Unsigned32, trpzApConfRadioProfFairQueuingEnabled TruthValue, trpzApConfRadioProfCacBackgroundACMandatory TruthValue, trpzApConfRadioProfCacBackgroundMaxUtilization Unsigned32, trpzApConfRadioProfCacBackgroundPolicingEnabled TruthValue, trpzApConfRadioProfCacBestEffortACMandatory TruthValue, trpzApConfRadioProfCacBestEffortMaxUtilization Unsigned32, trpzApConfRadioProfCacBestEffortPolicingEnabled TruthValue, trpzApConfRadioProfCacVideoACMandatory TruthValue, trpzApConfRadioProfCacVideoMaxUtilization Unsigned32, trpzApConfRadioProfCacVideoPolicingEnabled TruthValue, trpzApConfRadioProfCacVoiceACMandatory TruthValue, trpzApConfRadioProfCacVoiceMaxUtilization Unsigned32, trpzApConfRadioProfCacVoicePolicingEnabled TruthValue, trpzApConfRadioProfRfidTagEnabled TruthValue, trpzApConfRadioProfWmmPowerSaveEnabled TruthValue, trpzApConfRadioProfRateEnforcementEnabled TruthValue, trpzApConfRadioProfDfsChannelsEnabled TruthValue, trpzApConfRadioProfRFSpectralScanModeEnabled TruthValue, trpzApConfRadioProfRFSpectralScanPriority TrpzRadioProfileRFSpectralScanPriority, trpzApConfRadioProfRadioProfileFullName DisplayString } trpzApConfRadioProfRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Name of this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 1 } trpzApConfRadioProfBeaconInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Beacon Interval, time in thousandths of a second, for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 2 } trpzApConfRadioProfDtimInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 3 } trpzApConfRadioProfChannelWidth11na OBJECT-TYPE SYNTAX TrpzRadioChannelWidth MAX-ACCESS read-only STATUS deprecated DESCRIPTION "802.11n Channel Width for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 4 } trpzApConfRadioProfMaxTxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The maximum transmit threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 5 } trpzApConfRadioProfMaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The maximum receive threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 6 } trpzApConfRadioProfRtsThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The RTS threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 7 } trpzApConfRadioProfFragThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The fragmentation threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 8 } trpzApConfRadioProfLongXmitPreambleEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 9 } trpzApConfRadioProfCountermeasuresMode OBJECT-TYPE SYNTAX TrpzRadioProfileCountermeasuresMode MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Countermeasures Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 10 } trpzApConfRadioProfRFScanMode OBJECT-TYPE SYNTAX TrpzRadioProfileRFScanMode MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scanning Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 11 } trpzApConfRadioProfRFScanChannelScope OBJECT-TYPE SYNTAX TrpzRadioProfileRFScanChannelScope MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF scanning Channel Scope for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 12 } trpzApConfRadioProfRFScanCTSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 13 } trpzApConfRadioProfAutoTune11aChannelRange OBJECT-TYPE SYNTAX TrpzRadioProfileAutoTuneChannelRange MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile. Obsoleted: not supported anymore." ::= { trpzApConfRadioProfileEntry 14 } trpzApConfRadioProfAutoTuneIgnoreClientsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections. Obsoleted: not supported anymore." ::= { trpzApConfRadioProfileEntry 15 } trpzApConfRadioProfAutoTuneChannelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile. Obsoleted: not supported anymore." ::= { trpzApConfRadioProfileEntry 16 } trpzApConfRadioProfAutoTuneChannelHolddownInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile. Obsoleted: not supported anymore." ::= { trpzApConfRadioProfileEntry 17 } trpzApConfRadioProfAutoTuneChannelChangeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile. Obsoleted: not supported anymore." ::= { trpzApConfRadioProfileEntry 18 } trpzApConfRadioProfAutoTunePowerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 19 } trpzApConfRadioProfAutoTunePowerRampInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 20 } trpzApConfRadioProfAutoTunePowerChangeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 21 } trpzApConfRadioProfFairQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether weighted Fair Queuing is enabled for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 22 } trpzApConfRadioProfCacBackgroundACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 23 } trpzApConfRadioProfCacBackgroundMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum admission control limit for Background traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 24 } trpzApConfRadioProfCacBackgroundPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 25 } trpzApConfRadioProfCacBestEffortACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 26 } trpzApConfRadioProfCacBestEffortMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 27 } trpzApConfRadioProfCacBestEffortPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 28 } trpzApConfRadioProfCacVideoACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 29 } trpzApConfRadioProfCacVideoMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum admission control limit for Video traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 30 } trpzApConfRadioProfCacVideoPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 31 } trpzApConfRadioProfCacVoiceACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 32 } trpzApConfRadioProfCacVoiceMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 33 } trpzApConfRadioProfCacVoicePolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 34 } trpzApConfRadioProfRfidTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 35 } trpzApConfRadioProfWmmPowerSaveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 36 } trpzApConfRadioProfRateEnforcementEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 37 } trpzApConfRadioProfDfsChannelsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 38 } trpzApConfRadioProfRFSpectralScanModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 39 } trpzApConfRadioProfRFSpectralScanPriority OBJECT-TYPE SYNTAX TrpzRadioProfileRFSpectralScanPriority MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long." ::= { trpzApConfRadioProfileEntry 40 } trpzApConfRadioProfRadioProfileFullName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The full name of the Radio Profile. Indicates the entry in the new Radio Profile table (trpzApConfRadioProfile32Table)." ::= { trpzApConfRadioProfileEntry 41 } -- ===================================================== -- Table for Service Profiles connected to Radio Profile trpzApConfRadioProfServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProfServiceProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfigMibObjects 7 } trpzApConfRadioProfServiceProfileEntry OBJECT-TYPE SYNTAX TrpzApConfRadioProfServiceProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Connection between a Radio Profile and a Service Profile, currently configured on the AC. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index." INDEX { trpzApConfRpServpRadioProfileName, trpzApConfRpServpServiceProfileName } ::= { trpzApConfRadioProfServiceProfileTable 1 } TrpzApConfRadioProfServiceProfileEntry ::= SEQUENCE { trpzApConfRpServpRadioProfileName TrpzRadioProfileName, trpzApConfRpServpServiceProfileName TrpzServiceProfileName, trpzApConfRpServpRowStatus RowStatus } trpzApConfRpServpRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Name of this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfServiceProfileEntry 1 } trpzApConfRpServpServiceProfileName OBJECT-TYPE SYNTAX TrpzServiceProfileName MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Name of a Service Profile connected to this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfServiceProfileEntry 2 } trpzApConfRpServpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfServiceProfileEntry 3 } -- ================================================== -- Table for Snoop Filters connected to Radio Profile trpzApConfRadioProfSnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProfSnoopFilterEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfigMibObjects 8 } trpzApConfRadioProfSnoopFilterEntry OBJECT-TYPE SYNTAX TrpzApConfRadioProfSnoopFilterEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index." INDEX { trpzApConfRpSnoopfRadioProfileName, trpzApConfRpSnoopfSnoopFilterName } ::= { trpzApConfRadioProfSnoopFilterTable 1 } TrpzApConfRadioProfSnoopFilterEntry ::= SEQUENCE { trpzApConfRpSnoopfRadioProfileName TrpzRadioProfileName, trpzApConfRpSnoopfSnoopFilterName TrpzSnoopFilterName, trpzApConfRpSnoopfRowStatus RowStatus } trpzApConfRpSnoopfRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Name of this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfSnoopFilterEntry 1 } trpzApConfRpSnoopfSnoopFilterName OBJECT-TYPE SYNTAX TrpzSnoopFilterName MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Name of a Snoop Filter connected to this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfSnoopFilterEntry 2 } trpzApConfRpSnoopfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index." ::= { trpzApConfRadioProfSnoopFilterEntry 3 } -- ========================== -- Service Profile table trpzApConfServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Service Profiles currently configured on this AC." ::= { trpzApConfigMibObjects 9 } trpzApConfServiceProfileEntry OBJECT-TYPE SYNTAX TrpzApConfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Service Profile." INDEX { trpzApConfServProfServiceProfileName } ::= { trpzApConfServiceProfileTable 1 } TrpzApConfServiceProfileEntry ::= SEQUENCE { trpzApConfServProfServiceProfileName TrpzServiceProfileName, trpzApConfServProfSsidType TrpzServiceProfileSsidType, trpzApConfServProfBeaconEnabled TruthValue, trpzApConfServProf11naMode TrpzServiceProfile11nMode, trpzApConfServProf11ngMode TrpzServiceProfile11nMode, trpzApConfServProf11nShortGuardIntervalEnabled TruthValue, trpzApConfServProf11nFrameAggregation TrpzServiceProfile11nFrameAggregationType, trpzApConfServProf11nMsduMaxLength TrpzServiceProfile11nMsduMaxLength, trpzApConfServProf11nMpduMaxLength TrpzServiceProfile11nMpduMaxLength, trpzApConfServProfAuthFallthru TrpzServiceProfileAuthFallthruType, trpzApConfServProfWebAAAForm DisplayString, trpzApConfServProfSharedKeyAuthEnabled TruthValue, trpzApConfServProfWpaIeEnabled TruthValue, trpzApConfServProfWpaIeCipherTkipEnabled TruthValue, trpzApConfServProfWpaIeCipherCcmpEnabled TruthValue, trpzApConfServProfWpaIeCipherWep40Enabled TruthValue, trpzApConfServProfWpaIeCipherWep104Enabled TruthValue, trpzApConfServProfWpaIeAuthDot1xEnabled TruthValue, trpzApConfServProfWpaIeAuthPskEnabled TruthValue, trpzApConfServProfRsnIeEnabled TruthValue, trpzApConfServProfRsnIeCipherTkipEnabled TruthValue, trpzApConfServProfRsnIeCipherCcmpEnabled TruthValue, trpzApConfServProfRsnIeCipherWep40Enabled TruthValue, trpzApConfServProfRsnIeCipherWep104Enabled TruthValue, trpzApConfServProfRsnIeAuthDot1xEnabled TruthValue, trpzApConfServProfRsnIeAuthPskEnabled TruthValue, trpzApConfServProfTkipMicCountermeasuresTime Unsigned32, trpzApConfServProfMaxBandwidthKbps Unsigned32, trpzApConfServProfCacMode TrpzServiceProfileCacMode, trpzApConfServProfCacSessCount Unsigned32, trpzApConfServProfUserIdleTimeout Unsigned32, trpzApConfServProfIdleClientProbingEnabled TruthValue, trpzApConfServProfShortRetryCount Unsigned32, trpzApConfServProfLongRetryCount Unsigned32, trpzApConfServProfProxyArpEnabled TruthValue, trpzApConfServProfDhcpRestrictEnabled TruthValue, trpzApConfServProfNoBroadcastEnabled TruthValue, trpzApConfServProfSygateOnDemandEnabled TruthValue, trpzApConfServProfEnforceChecksEnabled TruthValue, trpzApConfServProfSodaRemediationAcl DisplayString, trpzApConfServProfSodaSuccessPage DisplayString, trpzApConfServProfSodaFailurePage DisplayString, trpzApConfServProfSodaLogoutPage DisplayString, trpzApConfServProfSodaAgentDirectory DisplayString, trpzApConfServProfWebPortalSessionTimeout Unsigned32, trpzApConfServProfWebPortalAcl DisplayString, trpzApConfServProfWebPortalLogoutEnabled TruthValue, trpzApConfServProfWebPortalLogoutUrl DisplayString, trpzApConfServProfKeepInitialVlanEnabled TruthValue, trpzApConfServProfMeshModeEnabled TruthValue, trpzApConfServProfBridgingEnabled TruthValue, trpzApConfServProfLoadBalanceExemptEnabled TruthValue, trpzApConfServProfM2UConversionEnabled TruthValue, trpzApConfServProfBackupSsidMode TrpzBackupSsidMode, trpzApConfServProfBackupSsidTimeout Unsigned32, trpzApConfServProfBackupSsidKeepClients TruthValue, trpzApConfServProfWebPortalLogoutForm DisplayString } trpzApConfServProfServiceProfileName OBJECT-TYPE SYNTAX TrpzServiceProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this service profile" ::= { trpzApConfServiceProfileEntry 1 } trpzApConfServProfSsidType OBJECT-TYPE SYNTAX TrpzServiceProfileSsidType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this service profile (clear/crypto)." ::= { trpzApConfServiceProfileEntry 2 } trpzApConfServProfBeaconEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether beacons are enabled for this service profile." ::= { trpzApConfServiceProfileEntry 3 } trpzApConfServProf11naMode OBJECT-TYPE SYNTAX TrpzServiceProfile11nMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.11n (na) mode for this service profile." ::= { trpzApConfServiceProfileEntry 4 } trpzApConfServProf11ngMode OBJECT-TYPE SYNTAX TrpzServiceProfile11nMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.11n (ng) mode for this service profile." ::= { trpzApConfServiceProfileEntry 5 } trpzApConfServProf11nShortGuardIntervalEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether short guard interval is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 6 } trpzApConfServProf11nFrameAggregation OBJECT-TYPE SYNTAX TrpzServiceProfile11nFrameAggregationType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Frame Aggregation mode for this service profile." ::= { trpzApConfServiceProfileEntry 7 } trpzApConfServProf11nMsduMaxLength OBJECT-TYPE SYNTAX TrpzServiceProfile11nMsduMaxLength MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum MSDU length for this service profile." ::= { trpzApConfServiceProfileEntry 8 } trpzApConfServProf11nMpduMaxLength OBJECT-TYPE SYNTAX TrpzServiceProfile11nMpduMaxLength MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum MPDU length for this service profile." ::= { trpzApConfServiceProfileEntry 9 } trpzApConfServProfAuthFallthru OBJECT-TYPE SYNTAX TrpzServiceProfileAuthFallthruType MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile." ::= { trpzApConfServiceProfileEntry 10 } trpzApConfServProfWebAAAForm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The custom login page that loads for WebAAA users, for this service profile." ::= { trpzApConfServiceProfileEntry 11 } trpzApConfServProfSharedKeyAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether shared-key authentication is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 12 } trpzApConfServProfWpaIeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WPA IE beaconing is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 13 } trpzApConfServProfWpaIeCipherTkipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether TKIP cipher is advertised in WPA IE, for this service profile." ::= { trpzApConfServiceProfileEntry 14 } trpzApConfServProfWpaIeCipherCcmpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether CCMP cipher is advertised in WPA IE, for this service profile." ::= { trpzApConfServiceProfileEntry 15 } trpzApConfServProfWpaIeCipherWep40Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore." ::= { trpzApConfServiceProfileEntry 16 } trpzApConfServProfWpaIeCipherWep104Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore." ::= { trpzApConfServiceProfileEntry 17 } trpzApConfServProfWpaIeAuthDot1xEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile." ::= { trpzApConfServiceProfileEntry 18 } trpzApConfServProfWpaIeAuthPskEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile." ::= { trpzApConfServiceProfileEntry 19 } trpzApConfServProfRsnIeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RSN IE beaconing is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 20 } trpzApConfServProfRsnIeCipherTkipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether TKIP cipher is advertised in RSN IE, for this service profile." ::= { trpzApConfServiceProfileEntry 21 } trpzApConfServProfRsnIeCipherCcmpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether CCMP cipher is advertised in RSN IE, for this service profile." ::= { trpzApConfServiceProfileEntry 22 } trpzApConfServProfRsnIeCipherWep40Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore." ::= { trpzApConfServiceProfileEntry 23 } trpzApConfServProfRsnIeCipherWep104Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore." ::= { trpzApConfServiceProfileEntry 24 } trpzApConfServProfRsnIeAuthDot1xEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile." ::= { trpzApConfServiceProfileEntry 25 } trpzApConfServProfRsnIeAuthPskEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile." ::= { trpzApConfServiceProfileEntry 26 } trpzApConfServProfTkipMicCountermeasuresTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Message Integrity Code (MIC) failures occur within 60 seconds." ::= { trpzApConfServiceProfileEntry 27 } trpzApConfServProfMaxBandwidthKbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited." ::= { trpzApConfServiceProfileEntry 28 } trpzApConfServProfCacMode OBJECT-TYPE SYNTAX TrpzServiceProfileCacMode MAX-ACCESS read-only STATUS current DESCRIPTION "The Call Admission Control (CAC) mode, for this service profile." ::= { trpzApConfServiceProfileEntry 29 } trpzApConfServProfCacSessCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile." ::= { trpzApConfServiceProfileEntry 30 } trpzApConfServProfUserIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires, the client session is changed to the Dissociated state, for this service profile." ::= { trpzApConfServiceProfileEntry 31 } trpzApConfServProfIdleClientProbingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile." ::= { trpzApConfServiceProfileEntry 32 } trpzApConfServProfShortRetryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile." ::= { trpzApConfServiceProfileEntry 33 } trpzApConfServProfLongRetryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile." ::= { trpzApConfServiceProfileEntry 34 } trpzApConfServProfProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether proxy ARP is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 35 } trpzApConfServProfDhcpRestrictEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile." ::= { trpzApConfServiceProfileEntry 36 } trpzApConfServProfNoBroadcastEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile." ::= { trpzApConfServiceProfileEntry 37 } trpzApConfServProfSygateOnDemandEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 38 } trpzApConfServProfEnforceChecksEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Enforcement of the SODA security checks is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 39 } trpzApConfServProfSodaRemediationAcl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Remediation page ACL to apply to the client when the failure page is loaded, for this service profile." ::= { trpzApConfServiceProfileEntry 40 } trpzApConfServProfSodaSuccessPage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile." ::= { trpzApConfServiceProfileEntry 41 } trpzApConfServProfSodaFailurePage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Failure page that is displayed on the client when the SODA agent checks fail, for this service profile." ::= { trpzApConfServiceProfileEntry 42 } trpzApConfServProfSodaLogoutPage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile." ::= { trpzApConfServiceProfileEntry 43 } trpzApConfServProfSodaAgentDirectory OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a different directory for the SODA agent files used for this service profile." ::= { trpzApConfServiceProfileEntry 44 } trpzApConfServProfWebPortalSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state before being terminated automatically, for this service profile." ::= { trpzApConfServiceProfileEntry 45 } trpzApConfServProfWebPortalAcl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of ACL used for filtering traffic for Web Portal users during authentication, for this service profile." ::= { trpzApConfServiceProfileEntry 46 } trpzApConfServProfWebPortalLogoutEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Web Portal logout functionality is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 47 } trpzApConfServProfWebPortalLogoutUrl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Web Portal Logout URL for this service profile." ::= { trpzApConfServiceProfileEntry 48 } trpzApConfServProfKeepInitialVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile." ::= { trpzApConfServiceProfileEntry 49 } trpzApConfServProfMeshModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether wireless mesh between APs is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 50 } trpzApConfServProfBridgingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether wireless bridging of traffic between APs is enabled for this service profile." ::= { trpzApConfServiceProfileEntry 51 } trpzApConfServProfLoadBalanceExemptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this service profile is exempted from load balancing." ::= { trpzApConfServiceProfileEntry 52 } trpzApConfServProfM2UConversionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether multicast IPv4 traffic on the wire is converted to unicast traffic for the wireless clients, for this service profile." ::= { trpzApConfServiceProfileEntry 53 } trpzApConfServProfBackupSsidMode OBJECT-TYPE SYNTAX TrpzBackupSsidMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the availability of backup SSIDs at a remote site. Backup SSIDs allow access to new clients when central site outage occurs." ::= { trpzApConfServiceProfileEntry 54 } trpzApConfServProfBackupSsidTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many seconds the backup SSIDs at a remote site will stay up after the outage ends. Value 0 means that the backup SSIDs will stay up indefinitely." ::= { trpzApConfServiceProfileEntry 55 } trpzApConfServProfBackupSsidKeepClients OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the existing client sessions at a remote site will be kept or not when central site outage occurs." ::= { trpzApConfServiceProfileEntry 56 } trpzApConfServProfWebPortalLogoutForm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The custom logout page that will be displayed for Web Portal users, for this service profile. An empty string means that the default page will be displayed." ::= { trpzApConfServiceProfileEntry 57 } -- ========================== -- Snoop Filter table trpzApConfSnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Snoop Filters currently configured on this AC." ::= { trpzApConfigMibObjects 10 } trpzApConfSnoopFilterEntry OBJECT-TYPE SYNTAX TrpzApConfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Snoop Filter." INDEX { trpzApConfSnoopFilterName } ::= { trpzApConfSnoopFilterTable 1 } TrpzApConfSnoopFilterEntry ::= SEQUENCE { trpzApConfSnoopFilterName TrpzSnoopFilterName, trpzApConfSnoopFilterEnabled TruthValue, trpzApConfSnoopFilterObserverAddrType InetAddressType, trpzApConfSnoopFilterObserverAddr InetAddress } trpzApConfSnoopFilterName OBJECT-TYPE SYNTAX TrpzSnoopFilterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this snoop filter." ::= { trpzApConfSnoopFilterEntry 1 } trpzApConfSnoopFilterEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this snoop filter is enabled." ::= { trpzApConfSnoopFilterEntry 2 } trpzApConfSnoopFilterObserverAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of 'trpzApConfSnoopFilterObserverAddr'. If no snoop observer is configured for a particular filter, this object will return 'unknown(0)' for that filter." ::= { trpzApConfSnoopFilterEntry 3 } trpzApConfSnoopFilterObserverAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the snoop observer. If no observer is configured for a particular snoop filter, this object will return an empty string for that filter. The type of this address is specified in 'trpzApConfSnoopFilterObserverAddrType'." ::= { trpzApConfSnoopFilterEntry 4 } -- ================================================= -- Table for Snoop Filters associated with AP Radios trpzApConfRadioSnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the associations of Snoop Filters with AP radios." ::= { trpzApConfigMibObjects 11 } trpzApConfRadioSnoopFilterEntry OBJECT-TYPE SYNTAX TrpzApConfRadioSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multiple snoop filters can be associated with one AP radio. A snoop filter can be associated with multiple AP radios. A combination of an AP number, a radio number and a filter name uniquely identifies the mapping of a filter to a specific radio." INDEX { trpzApConfRadioConfigApNum, trpzApConfRadioConfigRadioIndex, trpzApConfSnoopFilterName } ::= { trpzApConfRadioSnoopFilterTable 1 } TrpzApConfRadioSnoopFilterEntry ::= SEQUENCE { trpzApConfRadioSnoopFilterRowStatus RowStatus } trpzApConfRadioSnoopFilterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted." ::= { trpzApConfRadioSnoopFilterEntry 1 } -- ========================== -- Snoop Observer table trpzApConfSnoopObserverTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfSnoopObserverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the snoop observers currently configured on the AC. Snoop observers are hosts where snooped packets are sent." ::= { trpzApConfigMibObjects 12 } trpzApConfSnoopObserverEntry OBJECT-TYPE SYNTAX TrpzApConfSnoopObserverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration of a particular snoop observer." INDEX { trpzApConfSnoopObserverTargetAddrType, trpzApConfSnoopObserverTargetAddr } ::= { trpzApConfSnoopObserverTable 1 } TrpzApConfSnoopObserverEntry ::= SEQUENCE { trpzApConfSnoopObserverTargetAddrType InetAddressType, trpzApConfSnoopObserverTargetAddr InetAddress, trpzApConfSnoopObserverSnapLength Unsigned32, trpzApConfSnoopObserverInterval Unsigned32, trpzApConfSnoopObserverTxMode TrpzSnoopObserverTxMode } trpzApConfSnoopObserverTargetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of 'trpzApConfSnoopObserverTargetAddr'." ::= { trpzApConfSnoopObserverEntry 1 } trpzApConfSnoopObserverTargetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the snoop observer. The type of this address is specified in 'trpzApConfSnoopObserverTargetAddrType'." ::= { trpzApConfSnoopObserverEntry 2 } trpzApConfSnoopObserverSnapLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of bytes from a filtered packet to be encapsulated in TZSP and sent to the observer. Value 0 means that the entire packet is copied and sent to the observer." ::= { trpzApConfSnoopObserverEntry 3 } trpzApConfSnoopObserverInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the snooping interval, in milliseconds, for the packets with the same source. Value 0 means no rate limit." ::= { trpzApConfSnoopObserverEntry 4 } trpzApConfSnoopObserverTxMode OBJECT-TYPE SYNTAX TrpzSnoopObserverTxMode MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of transmission of snoop packets to this observer." ::= { trpzApConfSnoopObserverEntry 5 } -- ========================== -- Remote Site table trpzApConfRemoteSiteTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRemoteSiteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the remote sites currently configured on the AC. A remote site is a group of APs situated in the same location (site/branch), other than the location of the controller." ::= { trpzApConfigMibObjects 13 } trpzApConfRemoteSiteEntry OBJECT-TYPE SYNTAX TrpzApConfRemoteSiteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description of a remote site currently configured on the AC." INDEX { trpzApConfRemoteSiteName } ::= { trpzApConfRemoteSiteTable 1 } TrpzApConfRemoteSiteEntry ::= SEQUENCE { trpzApConfRemoteSiteName DisplayString, trpzApConfRemoteSiteCountryCode DisplayString, trpzApConfRemoteSitePathMtu Unsigned32, trpzApConfRemoteSiteBackupSsidsEnabled TruthValue, trpzApConfRemoteSiteLogServerEnabled TruthValue, trpzApConfRemoteSiteLogServerAddrType InetAddressType, trpzApConfRemoteSiteLogServerAddr InetAddress, trpzApConfRemoteSiteLogServerPort Unsigned32, trpzApConfRemoteSiteLogServerSeverity TrpzSyslogSeverity, trpzApConfRemoteSiteAcPollingEnabled TruthValue, trpzApConfRemoteSiteRadiusServerGroupName DisplayString, trpzApConfRemoteSiteRadiusDeadtime Unsigned32, trpzApConfRemoteSiteRadiusTimeout Unsigned32, trpzApConfRemoteSiteRadiusRetransmit Unsigned32, trpzApConfRemoteSiteRadiusNasIdType TrpzApRadiusNasIdType } trpzApConfRemoteSiteName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the remote site." ::= { trpzApConfRemoteSiteEntry 1 } trpzApConfRemoteSiteCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE (2|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the country code used for the configuration of the APs at the remote site. The system country code is used by default, in which case this object will return the special value 'NONE'." ::= { trpzApConfRemoteSiteEntry 2 } trpzApConfRemoteSitePathMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured MTU between the APs at the remote site and the ACs at the central site. The value 0 means that the MTU was not administratively configured." ::= { trpzApConfRemoteSiteEntry 3 } trpzApConfRemoteSiteBackupSsidsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the backup SSIDs at this remote site are enabled or not. Backup SSIDs allow access to new clients when central site outage occurs." ::= { trpzApConfRemoteSiteEntry 4 } trpzApConfRemoteSiteLogServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the APs at the remote site will send syslog messages to a log server." ::= { trpzApConfRemoteSiteEntry 5 } trpzApConfRemoteSiteLogServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of 'trpzApConfRemoteSiteLogServerAddr'." ::= { trpzApConfRemoteSiteEntry 6 } trpzApConfRemoteSiteLogServerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the log server used by the APs in the remote site. The type of this address is specified in 'trpzApConfRemoteSiteLogServerAddrType'." ::= { trpzApConfRemoteSiteEntry 7 } trpzApConfRemoteSiteLogServerPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the log server used by the APs in the remote site." ::= { trpzApConfRemoteSiteEntry 8 } trpzApConfRemoteSiteLogServerSeverity OBJECT-TYPE SYNTAX TrpzSyslogSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum severity of the messages sent by the APs in the remote site to the syslog server." ::= { trpzApConfRemoteSiteEntry 9 } trpzApConfRemoteSiteAcPollingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AC can poll the APs in this remote site to obtain full information about the AP-managed client sessions. When it is 'false(2)', the AC has limited information about the AP-managed sessions in this remote site." ::= { trpzApConfRemoteSiteEntry 10 } trpzApConfRemoteSiteRadiusServerGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the group of RADIUS servers used in the remote site. An empty string means that no RADIUS server group has been configured for the remote site." ::= { trpzApConfRemoteSiteEntry 11 } trpzApConfRemoteSiteRadiusDeadtime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The deadtime value configured for the RADIUS server group of this remote site. This value has precedence over the individual deadtime values of each server in the server group. If RADIUS deadtime is not configured for this remote site, this object will not have an instance in the current row." ::= { trpzApConfRemoteSiteEntry 12 } trpzApConfRemoteSiteRadiusTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout value configured for the RADIUS server group of this remote site. This value has precedence over the individual timeout values of each server in the server group. If RADIUS timeout is not configured for this remote site, this object will not have an instance in the current row." ::= { trpzApConfRemoteSiteEntry 13 } trpzApConfRemoteSiteRadiusRetransmit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The retransmit value configured for the RADIUS server group of this remote site. This value has precedence over the individual retransmit values of each server in the server group. If RADIUS retransmit is not configured for this remote site, this object will not have an instance in the current row." ::= { trpzApConfRemoteSiteEntry 14 } trpzApConfRemoteSiteRadiusNasIdType OBJECT-TYPE SYNTAX TrpzApRadiusNasIdType MAX-ACCESS read-only STATUS current DESCRIPTION "The NAS-ID type configured for the RADIUS server group of this remote site." ::= { trpzApConfRemoteSiteEntry 15 } -- ========================== -- Radio Profile 32 table trpzApConfRadioProfile32Table OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProfile32Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Radio Profiles currently configured on this AC. Deprecates trpzApConfRadioProfileTable." ::= { trpzApConfigMibObjects 14 } trpzApConfRadioProfile32Entry OBJECT-TYPE SYNTAX TrpzApConfRadioProfile32Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Radio Profile." INDEX { trpzApConfRadioProf32RadioProfileName } ::= { trpzApConfRadioProfile32Table 1 } TrpzApConfRadioProfile32Entry ::= SEQUENCE { trpzApConfRadioProf32RadioProfileName TrpzRadioProfileName32, trpzApConfRadioProf32BeaconInterval Unsigned32, trpzApConfRadioProf32DtimInterval Unsigned32, trpzApConfRadioProf32ChannelWidth11na TrpzRadioChannelWidth, trpzApConfRadioProf32MaxTxLifetime Unsigned32, trpzApConfRadioProf32MaxRxLifetime Unsigned32, trpzApConfRadioProf32RtsThreshold Unsigned32, trpzApConfRadioProf32FragThreshold Unsigned32, trpzApConfRadioProf32LongXmitPreambleEnabled TruthValue, trpzApConfRadioProf32CountermeasuresMode TrpzRadioProfileCountermeasuresMode, trpzApConfRadioProf32RFScanMode TrpzRadioProfileRFScanMode, trpzApConfRadioProf32RFScanChannelScope TrpzRadioProfileRFScanChannelScope, trpzApConfRadioProf32RFScanCTSEnabled TruthValue, trpzApConfRadioProf32AutoTunePowerEnabled TruthValue, trpzApConfRadioProf32AutoTunePowerRampInterval Unsigned32, trpzApConfRadioProf32AutoTunePowerChangeInterval Unsigned32, trpzApConfRadioProf32FairQueuingEnabled TruthValue, trpzApConfRadioProf32CacBackgroundACMandatory TruthValue, trpzApConfRadioProf32CacBackgroundMaxUtilization Unsigned32, trpzApConfRadioProf32CacBackgroundPolicingEnabled TruthValue, trpzApConfRadioProf32CacBestEffortACMandatory TruthValue, trpzApConfRadioProf32CacBestEffortMaxUtilization Unsigned32, trpzApConfRadioProf32CacBestEffortPolicingEnabled TruthValue, trpzApConfRadioProf32CacVideoACMandatory TruthValue, trpzApConfRadioProf32CacVideoMaxUtilization Unsigned32, trpzApConfRadioProf32CacVideoPolicingEnabled TruthValue, trpzApConfRadioProf32CacVoiceACMandatory TruthValue, trpzApConfRadioProf32CacVoiceMaxUtilization Unsigned32, trpzApConfRadioProf32CacVoicePolicingEnabled TruthValue, trpzApConfRadioProf32RfidTagEnabled TruthValue, trpzApConfRadioProf32WmmPowerSaveEnabled TruthValue, trpzApConfRadioProf32RateEnforcementEnabled TruthValue, trpzApConfRadioProf32DfsChannelsEnabled TruthValue, trpzApConfRadioProf32RFSpectralScanModeEnabled TruthValue, trpzApConfRadioProf32RFSpectralScanPriority TrpzRadioProfileRFSpectralScanPriority } trpzApConfRadioProf32RadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this radio profile." ::= { trpzApConfRadioProfile32Entry 1 } trpzApConfRadioProf32BeaconInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Beacon Interval, time in thousandths of a second, for this radio profile." ::= { trpzApConfRadioProfile32Entry 2 } trpzApConfRadioProf32DtimInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 3 } trpzApConfRadioProf32ChannelWidth11na OBJECT-TYPE SYNTAX TrpzRadioChannelWidth MAX-ACCESS read-only STATUS current DESCRIPTION "802.11n Channel Width for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 4 } trpzApConfRadioProf32MaxTxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum transmit threshold for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 5 } trpzApConfRadioProf32MaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum receive threshold for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 6 } trpzApConfRadioProf32RtsThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The RTS threshold for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 7 } trpzApConfRadioProf32FragThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The fragmentation threshold for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 8 } trpzApConfRadioProf32LongXmitPreambleEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble." ::= { trpzApConfRadioProfile32Entry 9 } trpzApConfRadioProf32CountermeasuresMode OBJECT-TYPE SYNTAX TrpzRadioProfileCountermeasuresMode MAX-ACCESS read-only STATUS current DESCRIPTION "Countermeasures Mode for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 10 } trpzApConfRadioProf32RFScanMode OBJECT-TYPE SYNTAX TrpzRadioProfileRFScanMode MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scanning Mode for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 11 } trpzApConfRadioProf32RFScanChannelScope OBJECT-TYPE SYNTAX TrpzRadioProfileRFScanChannelScope MAX-ACCESS read-only STATUS current DESCRIPTION "RF scanning Channel Scope for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 12 } trpzApConfRadioProf32RFScanCTSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel." ::= { trpzApConfRadioProfile32Entry 13 } trpzApConfRadioProf32AutoTunePowerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 14 } trpzApConfRadioProf32AutoTunePowerRampInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 15 } trpzApConfRadioProf32AutoTunePowerChangeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 16 } trpzApConfRadioProf32FairQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether weighted Fair Queuing is enabled for this radio profile." ::= { trpzApConfRadioProfile32Entry 17 } trpzApConfRadioProf32CacBackgroundACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 18 } trpzApConfRadioProf32CacBackgroundMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Background traffic, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 19 } trpzApConfRadioProf32CacBackgroundPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 20 } trpzApConfRadioProf32CacBestEffortACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 21 } trpzApConfRadioProf32CacBestEffortMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 22 } trpzApConfRadioProf32CacBestEffortPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 23 } trpzApConfRadioProf32CacVideoACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 24 } trpzApConfRadioProf32CacVideoMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Video traffic, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 25 } trpzApConfRadioProf32CacVideoPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 26 } trpzApConfRadioProf32CacVoiceACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 27 } trpzApConfRadioProf32CacVoiceMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Voice traffic, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 28 } trpzApConfRadioProf32CacVoicePolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 29 } trpzApConfRadioProf32RfidTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System." ::= { trpzApConfRadioProfile32Entry 30 } trpzApConfRadioProf32WmmPowerSaveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AP radios using this radio profile enable power save mode on WMM clients." ::= { trpzApConfRadioProfile32Entry 31 } trpzApConfRadioProf32RateEnforcementEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP." ::= { trpzApConfRadioProfile32Entry 32 } trpzApConfRadioProf32DfsChannelsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements." ::= { trpzApConfRadioProfile32Entry 33 } trpzApConfRadioProf32RFSpectralScanModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 34 } trpzApConfRadioProf32RFSpectralScanPriority OBJECT-TYPE SYNTAX TrpzRadioProfileRFSpectralScanPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile." ::= { trpzApConfRadioProfile32Entry 35 } -- ===================================================== -- Table for Service Profiles connected to Radio Profile trpzApConfRadioProf32ServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProf32ServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecates trpzApConfRadioProfServiceProfileTable." ::= { trpzApConfigMibObjects 15 } trpzApConfRadioProf32ServiceProfileEntry OBJECT-TYPE SYNTAX TrpzApConfRadioProf32ServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Connection between a Radio Profile and a Service Profile, currently configured on the AC." INDEX { trpzApConfRp32ServpRadioProfileName, trpzApConfRp32ServpServiceProfileName } ::= { trpzApConfRadioProf32ServiceProfileTable 1 } TrpzApConfRadioProf32ServiceProfileEntry ::= SEQUENCE { trpzApConfRp32ServpRadioProfileName TrpzRadioProfileName32, trpzApConfRp32ServpServiceProfileName TrpzServiceProfileName, trpzApConfRp32ServpRowStatus RowStatus } trpzApConfRp32ServpRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this Radio Profile." ::= { trpzApConfRadioProf32ServiceProfileEntry 1 } trpzApConfRp32ServpServiceProfileName OBJECT-TYPE SYNTAX TrpzServiceProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a Service Profile connected to this Radio Profile." ::= { trpzApConfRadioProf32ServiceProfileEntry 2 } trpzApConfRp32ServpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted." ::= { trpzApConfRadioProf32ServiceProfileEntry 3 } -- ================================================== -- Table for Snoop Filters connected to Radio Profile trpzApConfRadioProf32SnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF TrpzApConfRadioProf32SnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecates trpzApConfRadioProfSnoopFilterTable." ::= { trpzApConfigMibObjects 16 } trpzApConfRadioProf32SnoopFilterEntry OBJECT-TYPE SYNTAX TrpzApConfRadioProf32SnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Connection between a Radio Profile and a Snoop Filter, currently configured on the AC." INDEX { trpzApConfRp32SnoopfRadioProfileName, trpzApConfRp32SnoopfSnoopFilterName } ::= { trpzApConfRadioProf32SnoopFilterTable 1 } TrpzApConfRadioProf32SnoopFilterEntry ::= SEQUENCE { trpzApConfRp32SnoopfRadioProfileName TrpzRadioProfileName32, trpzApConfRp32SnoopfSnoopFilterName TrpzSnoopFilterName, trpzApConfRp32SnoopfRowStatus RowStatus } trpzApConfRp32SnoopfRadioProfileName OBJECT-TYPE SYNTAX TrpzRadioProfileName32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this Radio Profile." ::= { trpzApConfRadioProf32SnoopFilterEntry 1 } trpzApConfRp32SnoopfSnoopFilterName OBJECT-TYPE SYNTAX TrpzSnoopFilterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a Snoop Filter connected to this Radio Profile." ::= { trpzApConfRadioProf32SnoopFilterEntry 2 } trpzApConfRp32SnoopfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted." ::= { trpzApConfRadioProf32SnoopFilterEntry 3 } -- ============================================================================ -- -- Conformance -- trpzApConfigConformance OBJECT IDENTIFIER ::= { trpzApConfigMib 2 } trpzApConfigCompliances OBJECT IDENTIFIER ::= { trpzApConfigConformance 1 } trpzApConfigGroups OBJECT IDENTIFIER ::= { trpzApConfigConformance 2 } -- Compliance trpzApConfigCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for devices that implement AP Config MIB." MODULE -- this module (trpzApConfigMib) MANDATORY-GROUPS { trpzApConfApConfigTableGroup, trpzApConfRadioConfigTableGroup, trpzApConfApTemplateConfigTableGroup, trpzApConfApTemplateRadioConfigTableGroup, trpzApConfRadioProfileTableGroup, trpzApConfRadioProfServiceProfileTableGroup, trpzApConfRadioProfSnoopFilterTableGroup, trpzApConfServiceProfileTableGroup, trpzApConfSnoopFilterTableGroup } OBJECT trpzApConfRpServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. In release 7.1 only read access is implemented." OBJECT trpzApConfRpSnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. In release 7.1 only read access is implemented." ::= { trpzApConfigCompliances 1 } trpzApConfigComplianceRev2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 7.5 to 7.6 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev3." MODULE -- this module (trpzApConfigMib) MANDATORY-GROUPS { trpzApConfApConfigTableGroup, trpzApConfApConfigLldpGroup, trpzApConfApConfigTunnelGroup, trpzApConfApConfigRemoteApGroup, trpzApConfRadioConfigTableGroup, trpzApConfApTemplateConfigTableGroup, trpzApConfApTemplateRadioConfigTableGroup, trpzApConfRadioProfileTableGroup, trpzApConfRadioProfileRFSpectralScanGroup, trpzApConfRadioProfServiceProfileTableGroup, trpzApConfRadioProfSnoopFilterTableGroup, trpzApConfServiceProfileTableGroupRev2, trpzApConfSnoopFilterTableGroup } OBJECT trpzApConfRpServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRpSnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." ::= { trpzApConfigCompliances 2 } trpzApConfigComplianceRev3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 7.7 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev4." MODULE -- this module (trpzApConfigMib) MANDATORY-GROUPS { trpzApConfApConfigTableGroupRev2, trpzApConfApConfigLldpGroup, trpzApConfApConfigTunnelGroup, trpzApConfApConfigRemoteApGroup, trpzApConfRadioConfigTableGroup, trpzApConfApTemplateConfigTableGroup, trpzApConfApTemplateRadioConfigTableGroup, trpzApConfRadioProfileTableGroup, trpzApConfRadioProfileRFSpectralScanGroup, trpzApConfRadioProfServiceProfileTableGroup, trpzApConfRadioProfSnoopFilterTableGroup, trpzApConfSnoopFilterTableGroupRev2, trpzApConfRadioSnoopFilterTableGroup, trpzApConfSnoopObserverTableGroup, trpzApConfServiceProfileTableGroupRev3, trpzApConfRemoteSiteTableGroup } OBJECT trpzApConfRpServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRpSnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRadioSnoopFilterRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." ::= { trpzApConfigCompliances 3 } trpzApConfigComplianceRev4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 8.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev5." MODULE -- this module (trpzApConfigMib) MANDATORY-GROUPS { trpzApConfApConfigTableGroupRev2, trpzApConfApConfigLldpGroup, trpzApConfApConfigTunnelGroup, trpzApConfApConfigRemoteApGroup, trpzApConfRadioConfigTableGroup, trpzApConfApTemplateConfigTableGroup, trpzApConfApTemplateRadioConfigTableGroup, trpzApConfRadioProfileTableGroupRev2, trpzApConfRadioProfileRFSpectralScanGroup, trpzApConfRadioProfServiceProfileTableGroup, trpzApConfRadioProfSnoopFilterTableGroup, trpzApConfSnoopFilterTableGroupRev2, trpzApConfRadioSnoopFilterTableGroup, trpzApConfSnoopObserverTableGroup, trpzApConfServiceProfileTableGroupRev3, trpzApConfRemoteSiteTableGroup } OBJECT trpzApConfRpServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRpSnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProfSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRadioSnoopFilterRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." ::= { trpzApConfigCompliances 4 } trpzApConfigComplianceRev5 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 9.0 and greater of AC (wireless switch) software." MODULE -- this module (trpzApConfigMib) MANDATORY-GROUPS { trpzApConfApConfigLldpGroup, trpzApConfApConfigTunnelGroup, trpzApConfApConfigRemoteApGroup, trpzApConfApTemplateConfigTableGroup, trpzApConfSnoopFilterTableGroupRev2, trpzApConfRadioSnoopFilterTableGroup, trpzApConfSnoopObserverTableGroup, trpzApConfServiceProfileTableGroupRev3, trpzApConfApConfigTableGroupRev3, trpzApConfRadioConfigTableGroupRev2, trpzApConfApTemplateRadioConfigTableGroupRev2, trpzApConfRadioProfile32TableGroup, trpzApConfRadioProfileRFSpectralScanGroupRev2, trpzApConfRadioProf32ServiceProfileTableGroup, trpzApConfRadioProf32SnoopFilterTableGroup, trpzApConfRemoteSiteTableGroupRev2 } OBJECT trpzApConfRadioSnoopFilterRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRp32ServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProf32ServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." OBJECT trpzApConfRp32SnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the trpzApConfRadioProf32SnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. Only read access is implemented." ::= { trpzApConfigCompliances 5 } -- Units of Conformance trpzApConfApConfigTableGroup OBJECT-GROUP OBJECTS { trpzApConfApConfigApAttachType, trpzApConfApConfigPhysPortNum, trpzApConfApConfigApSerialNum, trpzApConfApConfigApModelName, trpzApConfApConfigFingerprint, trpzApConfApConfigBias, trpzApConfApConfigApTimeout, trpzApConfApConfigApName, trpzApConfApConfigContact, trpzApConfApConfigLocation, trpzApConfApConfigBlinkEnabled, trpzApConfApConfigForceImageDownloadEnabled, trpzApConfApConfigFirmwareUpgradeEnabled, trpzApConfApConfigLocalSwitchingEnabled, trpzApConfApConfigPowerMode, trpzApConfApConfigLedMode, trpzApConfApConfigDescription } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide AP Configuration info in releases 7.1 to 7.6. Replaced by trpzApConfApConfigTableGroupRev2." ::= { trpzApConfigGroups 1 } trpzApConfRadioConfigTableGroup OBJECT-GROUP OBJECTS { trpzApConfRadioConfigRadioType, trpzApConfRadioConfigRadioMode, trpzApConfRadioConfigRadioProfileName, trpzApConfRadioConfigChannel, trpzApConfRadioConfigTxPower, trpzApConfRadioConfigAutoTuneMaxTxPower, trpzApConfRadioConfigAntennaType, trpzApConfRadioConfigAntennaLocation, trpzApConfRadioConfigLoadBalancingEnabled, trpzApConfRadioConfigLoadBalancingGroup, trpzApConfRadioConfigLoadRebalancingEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 to 8.0. Replaced by trpzApConfRadioConfigTableGroupRev2." ::= { trpzApConfigGroups 2 } trpzApConfApTemplateConfigTableGroup OBJECT-GROUP OBJECTS { trpzApConfApTemplConfApTemplateEnabled, trpzApConfApTemplConfBias, trpzApConfApTemplConfApTimeout, trpzApConfApTemplConfBlinkEnabled, trpzApConfApTemplConfForceImageDownloadEnabled, trpzApConfApTemplConfFirmwareUpgradeEnabled, trpzApConfApTemplConfLocalSwitchingEnabled, trpzApConfApTemplConfPowerMode, trpzApConfApTemplConfLedMode } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater." ::= { trpzApConfigGroups 3 } trpzApConfApTemplateRadioConfigTableGroup OBJECT-GROUP OBJECTS { trpzApConfApTemRadioConfRadioMode, trpzApConfApTemRadioConfRadioProfileName, trpzApConfApTemRadioConfAutoTuneMaxTxPower, trpzApConfApTemRadioConfLoadBalancingEnabled, trpzApConfApTemRadioConfLoadBalancingGroup, trpzApConfApTemRadioConfLoadRebalancingEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 to 8.0. Replaced by trpzApConfApTemplateRadioConfigTableGroupRev2." ::= { trpzApConfigGroups 4 } trpzApConfRadioProfileTableGroup OBJECT-GROUP OBJECTS { trpzApConfRadioProfBeaconInterval, trpzApConfRadioProfDtimInterval, trpzApConfRadioProfChannelWidth11na, trpzApConfRadioProfMaxTxLifetime, trpzApConfRadioProfMaxRxLifetime, trpzApConfRadioProfRtsThreshold, trpzApConfRadioProfFragThreshold, trpzApConfRadioProfLongXmitPreambleEnabled, trpzApConfRadioProfCountermeasuresMode, trpzApConfRadioProfRFScanMode, trpzApConfRadioProfRFScanChannelScope, trpzApConfRadioProfRFScanCTSEnabled, trpzApConfRadioProfAutoTune11aChannelRange, trpzApConfRadioProfAutoTuneIgnoreClientsEnabled, trpzApConfRadioProfAutoTuneChannelEnabled, trpzApConfRadioProfAutoTuneChannelHolddownInterval, trpzApConfRadioProfAutoTuneChannelChangeInterval, trpzApConfRadioProfAutoTunePowerEnabled, trpzApConfRadioProfAutoTunePowerRampInterval, trpzApConfRadioProfAutoTunePowerChangeInterval, trpzApConfRadioProfFairQueuingEnabled, trpzApConfRadioProfCacBackgroundACMandatory, trpzApConfRadioProfCacBackgroundMaxUtilization, trpzApConfRadioProfCacBackgroundPolicingEnabled, trpzApConfRadioProfCacBestEffortACMandatory, trpzApConfRadioProfCacBestEffortMaxUtilization, trpzApConfRadioProfCacBestEffortPolicingEnabled, trpzApConfRadioProfCacVideoACMandatory, trpzApConfRadioProfCacVideoMaxUtilization, trpzApConfRadioProfCacVideoPolicingEnabled, trpzApConfRadioProfCacVoiceACMandatory, trpzApConfRadioProfCacVoiceMaxUtilization, trpzApConfRadioProfCacVoicePolicingEnabled, trpzApConfRadioProfRfidTagEnabled, trpzApConfRadioProfWmmPowerSaveEnabled, trpzApConfRadioProfRateEnforcementEnabled, trpzApConfRadioProfDfsChannelsEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 to 7.7. Replaced by trpzApConfRadioProfileTableGroupRev2." ::= { trpzApConfigGroups 5 } trpzApConfRadioProfServiceProfileTableGroup OBJECT-GROUP OBJECTS { trpzApConfRpServpRowStatus } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32ServiceProfileTableGroup." ::= { trpzApConfigGroups 6 } trpzApConfRadioProfSnoopFilterTableGroup OBJECT-GROUP OBJECTS { trpzApConfRpSnoopfRowStatus } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32SnoopFilterTableGroup." ::= { trpzApConfigGroups 7 } trpzApConfServiceProfileTableGroup OBJECT-GROUP OBJECTS { trpzApConfServProfSsidType, trpzApConfServProfBeaconEnabled, trpzApConfServProf11naMode, trpzApConfServProf11ngMode, trpzApConfServProf11nShortGuardIntervalEnabled, trpzApConfServProf11nFrameAggregation, trpzApConfServProf11nMsduMaxLength, trpzApConfServProf11nMpduMaxLength, trpzApConfServProfAuthFallthru, trpzApConfServProfWebAAAForm, trpzApConfServProfSharedKeyAuthEnabled, trpzApConfServProfWpaIeEnabled, trpzApConfServProfWpaIeCipherTkipEnabled, trpzApConfServProfWpaIeCipherCcmpEnabled, trpzApConfServProfWpaIeCipherWep40Enabled, trpzApConfServProfWpaIeCipherWep104Enabled, trpzApConfServProfWpaIeAuthDot1xEnabled, trpzApConfServProfWpaIeAuthPskEnabled, trpzApConfServProfRsnIeEnabled, trpzApConfServProfRsnIeCipherTkipEnabled, trpzApConfServProfRsnIeCipherCcmpEnabled, trpzApConfServProfRsnIeCipherWep40Enabled, trpzApConfServProfRsnIeCipherWep104Enabled, trpzApConfServProfRsnIeAuthDot1xEnabled, trpzApConfServProfRsnIeAuthPskEnabled, trpzApConfServProfTkipMicCountermeasuresTime, trpzApConfServProfMaxBandwidthKbps, trpzApConfServProfCacMode, trpzApConfServProfCacSessCount, trpzApConfServProfUserIdleTimeout, trpzApConfServProfIdleClientProbingEnabled, trpzApConfServProfShortRetryCount, trpzApConfServProfLongRetryCount, trpzApConfServProfProxyArpEnabled, trpzApConfServProfDhcpRestrictEnabled, trpzApConfServProfNoBroadcastEnabled, trpzApConfServProfSygateOnDemandEnabled, trpzApConfServProfEnforceChecksEnabled, trpzApConfServProfSodaRemediationAcl, trpzApConfServProfSodaSuccessPage, trpzApConfServProfSodaFailurePage, trpzApConfServProfSodaLogoutPage, trpzApConfServProfSodaAgentDirectory, trpzApConfServProfWebPortalSessionTimeout, trpzApConfServProfWebPortalAcl, trpzApConfServProfWebPortalLogoutEnabled, trpzApConfServProfWebPortalLogoutUrl, trpzApConfServProfKeepInitialVlanEnabled, trpzApConfServProfMeshModeEnabled, trpzApConfServProfBridgingEnabled, trpzApConfServProfLoadBalanceExemptEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater." ::= { trpzApConfigGroups 8 } trpzApConfSnoopFilterTableGroup OBJECT-GROUP OBJECTS { trpzApConfSnoopFilterEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 to 7.6. Replaced by trpzApConfSnoopFilterTableGroupRev2." ::= { trpzApConfigGroups 9 } trpzApConfServiceProfileTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfServProfSsidType, trpzApConfServProfBeaconEnabled, trpzApConfServProf11naMode, trpzApConfServProf11ngMode, trpzApConfServProf11nShortGuardIntervalEnabled, trpzApConfServProf11nFrameAggregation, trpzApConfServProf11nMsduMaxLength, trpzApConfServProf11nMpduMaxLength, trpzApConfServProfAuthFallthru, trpzApConfServProfWebAAAForm, trpzApConfServProfSharedKeyAuthEnabled, trpzApConfServProfWpaIeEnabled, trpzApConfServProfWpaIeCipherTkipEnabled, trpzApConfServProfWpaIeCipherCcmpEnabled, trpzApConfServProfWpaIeAuthDot1xEnabled, trpzApConfServProfWpaIeAuthPskEnabled, trpzApConfServProfRsnIeEnabled, trpzApConfServProfRsnIeCipherTkipEnabled, trpzApConfServProfRsnIeCipherCcmpEnabled, trpzApConfServProfRsnIeAuthDot1xEnabled, trpzApConfServProfRsnIeAuthPskEnabled, trpzApConfServProfTkipMicCountermeasuresTime, trpzApConfServProfMaxBandwidthKbps, trpzApConfServProfCacMode, trpzApConfServProfCacSessCount, trpzApConfServProfUserIdleTimeout, trpzApConfServProfIdleClientProbingEnabled, trpzApConfServProfShortRetryCount, trpzApConfServProfLongRetryCount, trpzApConfServProfProxyArpEnabled, trpzApConfServProfDhcpRestrictEnabled, trpzApConfServProfNoBroadcastEnabled, trpzApConfServProfSygateOnDemandEnabled, trpzApConfServProfEnforceChecksEnabled, trpzApConfServProfSodaRemediationAcl, trpzApConfServProfSodaSuccessPage, trpzApConfServProfSodaFailurePage, trpzApConfServProfSodaLogoutPage, trpzApConfServProfSodaAgentDirectory, trpzApConfServProfWebPortalSessionTimeout, trpzApConfServProfWebPortalAcl, trpzApConfServProfWebPortalLogoutEnabled, trpzApConfServProfWebPortalLogoutUrl, trpzApConfServProfKeepInitialVlanEnabled, trpzApConfServProfMeshModeEnabled, trpzApConfServProfBridgingEnabled, trpzApConfServProfLoadBalanceExemptEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Service Profile configuration info in releases 7.5 to 7.6. Replaced by trpzApConfServiceProfileTableGroupRev3." ::= { trpzApConfigGroups 10 } trpzApConfApConfigLldpGroup OBJECT-GROUP OBJECTS { trpzApConfApConfigLldpMode, trpzApConfApConfigLldpMedEnabled, trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected, trpzApConfApConfigLldpMedInventoryTlvSelected } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP LLDP Configuration info in releases 7.5 and greater." ::= { trpzApConfigGroups 11 } trpzApConfApConfigTunnelGroup OBJECT-GROUP OBJECTS { trpzApConfApConfigApTunnelEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP to AP tunnel Configuration info in releases 7.5 and greater." ::= { trpzApConfigGroups 12 } trpzApConfApConfigRemoteApGroup OBJECT-GROUP OBJECTS { trpzApConfApConfigDataSecurityEnabled, trpzApConfApConfigWanOutageModeEnabled, trpzApConfApConfigWanOutageExtendedTimeout, trpzApConfApConfigWanOutageEvaluationPeriod } STATUS current DESCRIPTION "Group of columnar objects implemented to provide remote AP related Configuration info in releases 7.5 and greater." ::= { trpzApConfigGroups 13 } trpzApConfRadioProfileRFSpectralScanGroup OBJECT-GROUP OBJECTS { trpzApConfRadioProfRFSpectralScanModeEnabled, trpzApConfRadioProfRFSpectralScanPriority } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 7.5 to 8.0. Replaced by trpzApConfRadioProfileRFSpectralScanGroupRev2." ::= { trpzApConfigGroups 14 } trpzApConfApConfigTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfApConfigApAttachType, trpzApConfApConfigPhysPortNum, trpzApConfApConfigApSerialNum, trpzApConfApConfigApModelName, trpzApConfApConfigFingerprint, trpzApConfApConfigBias, trpzApConfApConfigApTimeout, trpzApConfApConfigApName, trpzApConfApConfigContact, trpzApConfApConfigLocation, trpzApConfApConfigBlinkEnabled, trpzApConfApConfigForceImageDownloadEnabled, trpzApConfApConfigFirmwareUpgradeEnabled, trpzApConfApConfigLocalSwitchingEnabled, trpzApConfApConfigPowerMode, trpzApConfApConfigLedMode, trpzApConfApConfigDescription, trpzApConfApConfigRemoteSiteName, trpzApConfApConfigPathMtu, trpzApConfApConfigHighLatencyModeEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide AP Configuration info in releases 7.7 to 8.0. Replaced by trpzApConfApConfigTableGroupRev3." ::= { trpzApConfigGroups 15 } trpzApConfSnoopFilterTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfSnoopFilterEnabled, trpzApConfSnoopFilterObserverAddrType, trpzApConfSnoopFilterObserverAddr } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.7 and greater." ::= { trpzApConfigGroups 16 } trpzApConfSnoopObserverTableGroup OBJECT-GROUP OBJECTS { trpzApConfSnoopObserverSnapLength, trpzApConfSnoopObserverInterval, trpzApConfSnoopObserverTxMode } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Snoop Observer configuration info in releases 7.7 and greater." ::= { trpzApConfigGroups 17 } trpzApConfRadioSnoopFilterTableGroup OBJECT-GROUP OBJECTS { trpzApConfRadioSnoopFilterRowStatus } STATUS current DESCRIPTION "Group of columnar objects implemented to provide info about the associations of Snoop Filters with AP Radios in releases 7.7 and greater." ::= { trpzApConfigGroups 18 } trpzApConfServiceProfileTableGroupRev3 OBJECT-GROUP OBJECTS { trpzApConfServProfSsidType, trpzApConfServProfBeaconEnabled, trpzApConfServProf11naMode, trpzApConfServProf11ngMode, trpzApConfServProf11nShortGuardIntervalEnabled, trpzApConfServProf11nFrameAggregation, trpzApConfServProf11nMsduMaxLength, trpzApConfServProf11nMpduMaxLength, trpzApConfServProfAuthFallthru, trpzApConfServProfWebAAAForm, trpzApConfServProfWebPortalLogoutForm, trpzApConfServProfSharedKeyAuthEnabled, trpzApConfServProfWpaIeEnabled, trpzApConfServProfWpaIeCipherTkipEnabled, trpzApConfServProfWpaIeCipherCcmpEnabled, trpzApConfServProfWpaIeAuthDot1xEnabled, trpzApConfServProfWpaIeAuthPskEnabled, trpzApConfServProfRsnIeEnabled, trpzApConfServProfRsnIeCipherTkipEnabled, trpzApConfServProfRsnIeCipherCcmpEnabled, trpzApConfServProfRsnIeAuthDot1xEnabled, trpzApConfServProfRsnIeAuthPskEnabled, trpzApConfServProfTkipMicCountermeasuresTime, trpzApConfServProfMaxBandwidthKbps, trpzApConfServProfCacMode, trpzApConfServProfCacSessCount, trpzApConfServProfUserIdleTimeout, trpzApConfServProfIdleClientProbingEnabled, trpzApConfServProfShortRetryCount, trpzApConfServProfLongRetryCount, trpzApConfServProfProxyArpEnabled, trpzApConfServProfDhcpRestrictEnabled, trpzApConfServProfNoBroadcastEnabled, trpzApConfServProfSygateOnDemandEnabled, trpzApConfServProfEnforceChecksEnabled, trpzApConfServProfSodaRemediationAcl, trpzApConfServProfSodaSuccessPage, trpzApConfServProfSodaFailurePage, trpzApConfServProfSodaLogoutPage, trpzApConfServProfSodaAgentDirectory, trpzApConfServProfWebPortalSessionTimeout, trpzApConfServProfWebPortalAcl, trpzApConfServProfWebPortalLogoutEnabled, trpzApConfServProfWebPortalLogoutUrl, trpzApConfServProfKeepInitialVlanEnabled, trpzApConfServProfMeshModeEnabled, trpzApConfServProfBridgingEnabled, trpzApConfServProfLoadBalanceExemptEnabled, trpzApConfServProfM2UConversionEnabled, trpzApConfServProfBackupSsidMode, trpzApConfServProfBackupSsidTimeout, trpzApConfServProfBackupSsidKeepClients } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Service Profile configuration info in releases 7.7 and greater." ::= { trpzApConfigGroups 19 } trpzApConfRemoteSiteTableGroup OBJECT-GROUP OBJECTS { trpzApConfRemoteSiteCountryCode, trpzApConfRemoteSitePathMtu, trpzApConfRemoteSiteBackupSsidsEnabled, trpzApConfRemoteSiteLogServerEnabled, trpzApConfRemoteSiteLogServerAddrType, trpzApConfRemoteSiteLogServerAddr, trpzApConfRemoteSiteLogServerPort, trpzApConfRemoteSiteLogServerSeverity } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Remote Site configuration info in releases 7.7 to 8.0. Replaced by trpzApConfRemoteSiteTableGroupRev2." ::= { trpzApConfigGroups 20 } trpzApConfRadioProfileTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfRadioProfBeaconInterval, trpzApConfRadioProfDtimInterval, trpzApConfRadioProfChannelWidth11na, trpzApConfRadioProfMaxTxLifetime, trpzApConfRadioProfMaxRxLifetime, trpzApConfRadioProfRtsThreshold, trpzApConfRadioProfFragThreshold, trpzApConfRadioProfLongXmitPreambleEnabled, trpzApConfRadioProfCountermeasuresMode, trpzApConfRadioProfRFScanMode, trpzApConfRadioProfRFScanChannelScope, trpzApConfRadioProfRFScanCTSEnabled, trpzApConfRadioProfAutoTunePowerEnabled, trpzApConfRadioProfAutoTunePowerRampInterval, trpzApConfRadioProfAutoTunePowerChangeInterval, trpzApConfRadioProfFairQueuingEnabled, trpzApConfRadioProfCacBackgroundACMandatory, trpzApConfRadioProfCacBackgroundMaxUtilization, trpzApConfRadioProfCacBackgroundPolicingEnabled, trpzApConfRadioProfCacBestEffortACMandatory, trpzApConfRadioProfCacBestEffortMaxUtilization, trpzApConfRadioProfCacBestEffortPolicingEnabled, trpzApConfRadioProfCacVideoACMandatory, trpzApConfRadioProfCacVideoMaxUtilization, trpzApConfRadioProfCacVideoPolicingEnabled, trpzApConfRadioProfCacVoiceACMandatory, trpzApConfRadioProfCacVoiceMaxUtilization, trpzApConfRadioProfCacVoicePolicingEnabled, trpzApConfRadioProfRfidTagEnabled, trpzApConfRadioProfWmmPowerSaveEnabled, trpzApConfRadioProfRateEnforcementEnabled, trpzApConfRadioProfDfsChannelsEnabled } STATUS obsolete DESCRIPTION "Group of columnar objects implemented to provide Radio Profile configuration info in release 8.0. Replaced by trpzApConfRadioProfile32TableGroup." ::= { trpzApConfigGroups 21 } trpzApConfApConfigTableGroupRev3 OBJECT-GROUP OBJECTS { trpzApConfApConfigApAttachType, trpzApConfApConfigPhysPortNum, trpzApConfApConfigApSerialNum, trpzApConfApConfigApModelName, trpzApConfApConfigFingerprint, trpzApConfApConfigBias, trpzApConfApConfigApTimeout, trpzApConfApConfigContact, trpzApConfApConfigLocation, trpzApConfApConfigBlinkEnabled, trpzApConfApConfigForceImageDownloadEnabled, trpzApConfApConfigFirmwareUpgradeEnabled, trpzApConfApConfigLocalSwitchingEnabled, trpzApConfApConfigPowerMode, trpzApConfApConfigLedMode, trpzApConfApConfigDescription, trpzApConfApConfigRemoteSiteName, trpzApConfApConfigPathMtu, trpzApConfApConfigHighLatencyModeEnabled, trpzApConfApConfigApName2, trpzApConfApConfigCacheConfigEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP Configuration info in releases 9.0 and greater." ::= { trpzApConfigGroups 22 } trpzApConfRadioConfigTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfRadioConfigRadioType, trpzApConfRadioConfigRadioMode, trpzApConfRadioConfigChannel, trpzApConfRadioConfigTxPower, trpzApConfRadioConfigAntennaType, trpzApConfRadioConfigAntennaLocation, trpzApConfRadioConfigLoadBalancingEnabled, trpzApConfRadioConfigLoadBalancingGroup, trpzApConfRadioConfigLoadRebalancingEnabled, trpzApConfRadioConfigRadioProfileName2 } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration info in releases 9.0 and greater." ::= { trpzApConfigGroups 23 } trpzApConfApTemplateRadioConfigTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfApTemRadioConfRadioMode, trpzApConfApTemRadioConfLoadBalancingEnabled, trpzApConfApTemRadioConfLoadBalancingGroup, trpzApConfApTemRadioConfLoadRebalancingEnabled, trpzApConfApTemRadioConfRadioProfileName2 } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration Template info in releases 9.0 and greater." ::= { trpzApConfigGroups 24 } trpzApConfRadioProfile32TableGroup OBJECT-GROUP OBJECTS { trpzApConfRadioProf32BeaconInterval, trpzApConfRadioProf32DtimInterval, trpzApConfRadioProf32ChannelWidth11na, trpzApConfRadioProf32MaxTxLifetime, trpzApConfRadioProf32MaxRxLifetime, trpzApConfRadioProf32RtsThreshold, trpzApConfRadioProf32FragThreshold, trpzApConfRadioProf32LongXmitPreambleEnabled, trpzApConfRadioProf32CountermeasuresMode, trpzApConfRadioProf32RFScanMode, trpzApConfRadioProf32RFScanChannelScope, trpzApConfRadioProf32RFScanCTSEnabled, trpzApConfRadioProf32AutoTunePowerEnabled, trpzApConfRadioProf32AutoTunePowerRampInterval, trpzApConfRadioProf32AutoTunePowerChangeInterval, trpzApConfRadioProf32FairQueuingEnabled, trpzApConfRadioProf32CacBackgroundACMandatory, trpzApConfRadioProf32CacBackgroundMaxUtilization, trpzApConfRadioProf32CacBackgroundPolicingEnabled, trpzApConfRadioProf32CacBestEffortACMandatory, trpzApConfRadioProf32CacBestEffortMaxUtilization, trpzApConfRadioProf32CacBestEffortPolicingEnabled, trpzApConfRadioProf32CacVideoACMandatory, trpzApConfRadioProf32CacVideoMaxUtilization, trpzApConfRadioProf32CacVideoPolicingEnabled, trpzApConfRadioProf32CacVoiceACMandatory, trpzApConfRadioProf32CacVoiceMaxUtilization, trpzApConfRadioProf32CacVoicePolicingEnabled, trpzApConfRadioProf32RfidTagEnabled, trpzApConfRadioProf32WmmPowerSaveEnabled, trpzApConfRadioProf32RateEnforcementEnabled, trpzApConfRadioProf32DfsChannelsEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Profile configuration info in releases 9.0 and greater." ::= { trpzApConfigGroups 25 } trpzApConfRadioProfileRFSpectralScanGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfRadioProf32RFSpectralScanModeEnabled, trpzApConfRadioProf32RFSpectralScanPriority } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 9.0 and greater." ::= { trpzApConfigGroups 26 } trpzApConfRadioProf32ServiceProfileTableGroup OBJECT-GROUP OBJECTS { trpzApConfRp32ServpRowStatus } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 9.0 and greater." ::= { trpzApConfigGroups 27 } trpzApConfRadioProf32SnoopFilterTableGroup OBJECT-GROUP OBJECTS { trpzApConfRp32SnoopfRowStatus } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 9.0 and greater." ::= { trpzApConfigGroups 28 } trpzApConfRemoteSiteTableGroupRev2 OBJECT-GROUP OBJECTS { trpzApConfRemoteSiteCountryCode, trpzApConfRemoteSitePathMtu, trpzApConfRemoteSiteBackupSsidsEnabled, trpzApConfRemoteSiteLogServerEnabled, trpzApConfRemoteSiteLogServerAddrType, trpzApConfRemoteSiteLogServerAddr, trpzApConfRemoteSiteLogServerPort, trpzApConfRemoteSiteLogServerSeverity, trpzApConfRemoteSiteAcPollingEnabled, trpzApConfRemoteSiteRadiusServerGroupName, trpzApConfRemoteSiteRadiusDeadtime, trpzApConfRemoteSiteRadiusTimeout, trpzApConfRemoteSiteRadiusRetransmit, trpzApConfRemoteSiteRadiusNasIdType } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Remote Site configuration info in releases 9.0 and greater." ::= { trpzApConfigGroups 29 } END