-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsmppvrst.mib,v 1.12 2013/05/17 11:57:56 siva Exp $ SUPERMICRO-MIPVRST-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------- -- Proprietary MIB for Per VLAN Rapid Spanning Tree Protocol -- ------------------------------------------------- IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32, enterprises,Counter32, TimeTicks,NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, MacAddress, TruthValue, DisplayString , RowStatus FROM SNMPv2-TC; futureMIPvrstMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "MIB for Multiple Instance Per-VLAN Rapid Spanning Tree" REVISION "201209050000Z" DESCRIPTION "MIB for Multiple Instance Per-VLAN Rapid Spanning Tree" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 154} BridgeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Identifier of Bridge in 8 byte format" SYNTAX OCTET STRING (SIZE (8)) Timeout ::= TEXTUAL-CONVENTION DISPLAY-HINT "d4" STATUS current DESCRIPTION " Time out value in 4 byte" SYNTAX Integer32 EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } fsMIFuturePvrst OBJECT IDENTIFIER ::= { futureMIPvrstMIB 1 } fsMIFsPvrstTrapsControl OBJECT IDENTIFIER ::= { futureMIPvrstMIB 2 } fsMIFuturePvrstTraps OBJECT IDENTIFIER ::= { futureMIPvrstMIB 3 } -- fsMIFuturePvrst group fsMIPvrstGlobalTrace OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Global Trace Statements in the Pvrst Module." ::= { fsMIFuturePvrst 1 } fsMIPvrstGlobalDebug OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Global Debug Statements in the Pvrst Module." ::= { fsMIFuturePvrst 2 } fsMIFuturePvrstTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIFuturePvrstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of per Virtual Context Pvrst Module Parameters." ::= { fsMIFuturePvrst 3 } fsMIFuturePvrstEntry OBJECT-TYPE SYNTAX FsMIFuturePvrstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Context Pvrst Module Parameters." INDEX { fsMIFuturePvrstContextId } ::= { fsMIFuturePvrstTable 1 } FsMIFuturePvrstEntry ::= SEQUENCE { fsMIFuturePvrstContextId Integer32, fsMIPvrstSystemControl INTEGER, fsMIPvrstModuleStatus EnabledStatus, fsMIPvrstNoOfActiveInstances Integer32, fsMIPvrstBrgAddress MacAddress, fsMIPvrstUpCount Counter32, fsMIPvrstDownCount Counter32, fsMIPvrstPathCostDefaultType INTEGER, fsMIPvrstDynamicPathCostCalculation TruthValue, fsMIPvrstTrace Integer32, fsMIPvrstDebug Integer32, fsMIPvrstBufferOverFlowCount Counter32, fsMIPvrstMemAllocFailureCount Counter32, fsMIPvrstContextName DisplayString, fsMIPvrstCalcPortPathCostOnSpeedChg TruthValue, fsMIPvrstGlobalBpduGuard Integer32 } fsMIFuturePvrstContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the Virtual Context." ::= { fsMIFuturePvrstEntry 1 } fsMIPvrstSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative shutdown status requested by management for the Pvrst feature. The value start (1) indicates that Pvrst should be active in the device on all ports. The value shutdown (2) indicates that Pvrst should be shutdown in the device on all ports. All memory should be released on all ports." ::= { fsMIFuturePvrstEntry 2 } fsMIPvrstModuleStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status requested by management for the Pvrst feature. The value enabled(1) indicates that Pvrst should be enabled in the device on all ports. The value disabled(2) indicates that Pvrst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIPvrstSystemControl set to start." ::= { fsMIFuturePvrstEntry 3 } fsMIPvrstNoOfActiveInstances OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of instances active currently" ::= { fsMIFuturePvrstEntry 4 } fsMIPvrstBrgAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with fsMIPvrstInstBridgePriority or fsMIPvrstInstBridgePriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol." ::= { fsMIFuturePvrstEntry 5 } fsMIPvrstUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Pvrst Module has been enabled." ::= { fsMIFuturePvrstEntry 6 } fsMIPvrstDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times PVRST Module has been disabled." ::= { fsMIFuturePvrstEntry 7 } fsMIPvrstPathCostDefaultType OBJECT-TYPE SYNTAX INTEGER { stp8021d1998(1), stp8021t2001(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "*************This object is obsolete****************** The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t." ::= { fsMIFuturePvrstEntry 8 } fsMIPvrstDynamicPathCostCalculation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed(when the operational status of the port changes from down to up), otherwise the link speed at the time of port creation is used for calculating the path cost. In both cases if the user has configured a pathcost for the port that will be used. By default dynamic pathcost calculation is set to false." DEFVAL { false } ::= { fsMIFuturePvrstEntry 9 } fsMIPvrstTrace OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Trace Statements for the Pvrst Module in this context . A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of trace levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Trace Option to any value will cause the Debug Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive." DEFVAL { 0 } ::= { fsMIFuturePvrstEntry 10 } fsMIPvrstDebug OBJECT-TYPE SYNTAX Integer32 (0..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Debug Statements in the Pvrst Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the level of debug is as follows: 0 - Init and Shutdown Debug statements 1 - Management Debug statements 2 - Memory related Debug statements 3 - BPDU related Debug statements 4 - Event Handling Debug statements 5 - Timer Module Debug statements 6 - Port Information SEM Debug statements 7 - Port Receive SEM Debug statements (Invalid in the case of Pvrst) 8 - Role Selection SEM Debug statements 9 - Role Transition SEM Debug statements 10 - State Transition SEM Debug statements 11 - Protocol Migration SEM Debug statements 12 - Topology Change SEM Debug statements 13 - Port Transmit SEM Debug statements 14 - Bridge Detection SEM Debug statements 15 - All Failure Debug statements 16 - Redundancy code flow Debug statements The remaining bits are unused. Combination of debug levels are also allowed. For example if the bits 0 and 1 are set, then the Debug statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Debug Option to any value will cause the Trace Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive." DEFVAL { 0 } ::= { fsMIFuturePvrstEntry 11 } fsMIPvrstBufferOverFlowCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event." ::= { fsMIFuturePvrstEntry 12 } fsMIPvrstMemAllocFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event." ::= { fsMIFuturePvrstEntry 13 } fsMIPvrstContextName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to identity the context-name." ::= { fsMIFuturePvrstEntry 14 } fsMIPvrstCalcPortPathCostOnSpeedChg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated ports where depening on Active ports speed of Link aggregated port changes. By default dynamic pathcost calculation on change in speed is set to false." DEFVAL { false } ::= { fsMIFuturePvrstEntry 15 } fsMIPvrstGlobalBpduGuard OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures BPDU guard globally in PVRST and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard feature on edge ports globally and moves the port to disabled discarding state when BPDU is received on the edge ports. Disable - disables BPDU Guard feature on edge ports globally" DEFVAL { 2 } ::= { fsMIFuturePvrstEntry 16 } -- ------------------------------------- -- fsMIFuturePvrstTable - End -- ------------------------------------- -- ------------------------------------- -- fsMIFuturePvrstPortTable - Start -- ------------------------------------- fsMIFuturePvrstPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIFuturePvrstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Ports per Virtual Context ." ::= { fsMIFuturePvrst 4 } fsMIFuturePvrstPortEntry OBJECT-TYPE SYNTAX FsMIFuturePvrstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Context Pvrst Module Port Parameters." INDEX { fsMIPvrstPort } ::= { fsMIFuturePvrstPortTable 1 } FsMIFuturePvrstPortEntry ::= SEQUENCE { fsMIPvrstPort Integer32, fsMIPvrstPortAdminEdgeStatus TruthValue, fsMIPvrstPortOperEdgePortStatus TruthValue, fsMIPvrstBridgeDetectionSemState INTEGER, fsMIPvrstPortEnabledStatus TruthValue, fsMIPvrstRootGuard TruthValue, fsMIPvrstBpduGuard Integer32, fsMIPvrstEncapType INTEGER, fsMIPvrstPortAdminPointToPoint INTEGER, fsMIPvrstPortOperPointToPoint TruthValue, fsMIPvrstPortInvalidBpdusRcvd Counter32, fsMIPvrstPortInvalidConfigBpduRxCount Counter32, fsMIPvrstPortInvalidTcnBpduRxCount Counter32, fsMIPvrstPortRowStatus RowStatus, fsMIPvrstRootInconsistentState TruthValue } fsMIPvrstPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, indicating the Port number." ::= { fsMIFuturePvrstPortEntry 1 } fsMIPvrstPortAdminEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port." ::= { fsMIFuturePvrstPortEntry 2 } fsMIPvrstPortOperEdgePortStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the Edge Port parameter. The object is initialized to the value of fsMIPvrstPortAdminEdgeStatus and is set FALSE on reception of a BPDU." ::= { fsMIFuturePvrstPortEntry 3 } fsMIPvrstBridgeDetectionSemState OBJECT-TYPE SYNTAX INTEGER { edge (0), notedge (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the bridge detetion state machine of this port for all Spanning Tree context" ::= { fsMIFuturePvrstPortEntry 4 } fsMIPvrstPortEnabledStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value for the port to configure PVRST enable/disable on this Port By default PVRST is enabled on each port" ::= { fsMIFuturePvrstPortEntry 5 } fsMIPvrstRootGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value for the root guard is configurable on this Port. By default it is False(2) & can be configured True(1)" ::= { fsMIFuturePvrstPortEntry 6 } fsMIPvrstBpduGuard OBJECT-TYPE SYNTAX INTEGER { none (0), enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This configures the BPDU guard feature on this port and has higher priority over Global BPDU Guard. Enable - prevents temporary loops and applicable to ports and moves the port to disabled discarding state when BPDU is received on this port. Disable - Disables the Bpdu Guard feature and the port state will be maintained till it is manually made up. None - removes the BPDU Guard functionality on this port so that when Global BPDU guard configuration will take effect if this port is edge port" DEFVAL { 0 } ::= { fsMIFuturePvrstPortEntry 7 } fsMIPvrstEncapType OBJECT-TYPE SYNTAX INTEGER { dot1Q (0), isl (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value for the encapsulation type on the Port. On Access Port, the encapsulation type will be DOT1q & is unchangeable. Only on Trunk Ports it is changeable. " DEFVAL {0} ::= { fsMIFuturePvrstPortEntry 8 } fsMIPvrstPortAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means." ::= { fsMIFuturePvrstPortEntry 9 } fsMIPvrstPortOperPointToPoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the fsMIPvrstPortAdminPointToPoint object." ::= { fsMIFuturePvrstPortEntry 10 } fsMIPvrstPortInvalidBpdusRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid Pvrst BPDUs Received on this port." ::= { fsMIFuturePvrstPortEntry 11 } fsMIPvrstPortInvalidConfigBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid Configuration BPDUs Received on this port." ::= { fsMIFuturePvrstPortEntry 12 } fsMIPvrstPortInvalidTcnBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid TCN BPDUs Received on this port." ::= { fsMIFuturePvrstPortEntry 13 } fsMIPvrstPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create or delete interfaces at PVRST module level.Ports can be created at PVRST module level only for ports that have been created in Interface manager and mapped to a context . This is applicable only when Automatic Port Create Feature is Disabled. " ::= { fsMIFuturePvrstPortEntry 14 } fsMIPvrstRootInconsistentState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " A Boolean value set when the designated port receives a superior BPDU trying to transition itself to the Root Port. A value of TRUE, indicates that the state of this port is moved into an root-inconsistent state.A value of FALSE, indicates that this port is not moved into an root-inconsistent state " DEFVAL { false } ::= { fsMIFuturePvrstPortEntry 15 } -- ------------------------------------- -- fsMIFuturePvrstPortTable - End -- ------------------------------------- -- ----------------------------------------------------------------- -- Future Per Vlan Spanning Tree Instance Bridge Table -- ----------------------------------------------------------------- fsMIPvrstInstBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPvrstInstBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Contexts." ::= { fsMIFuturePvrst 5 } fsMIPvrstInstBridgeEntry OBJECT-TYPE SYNTAX FsMIPvrstInstBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the Bridge Information." INDEX { fsMIFuturePvrstContextId, fsMIPvrstInstVlanId } ::= { fsMIPvrstInstBridgeTable 1 } FsMIPvrstInstBridgeEntry ::= SEQUENCE { fsMIPvrstInstVlanId Integer32, fsMIPvrstInstBridgePriority Integer32, fsMIPvrstInstRootCost Integer32, fsMIPvrstInstRootPort Integer32, fsMIPvrstInstBridgeMaxAge Timeout, fsMIPvrstInstBridgeHelloTime Timeout, fsMIPvrstInstBridgeForwardDelay Timeout, fsMIPvrstInstHoldTime Integer32, fsMIPvrstInstTxHoldCount Integer32, fsMIPvrstInstTimeSinceTopologyChange TimeTicks, fsMIPvrstInstTopChanges Counter32, fsMIPvrstInstNewRootCount Counter32, fsMIPvrstInstInstanceUpCount Counter32, fsMIPvrstInstInstanceDownCount Counter32, fsMIPvrstInstPortRoleSelSemState INTEGER, fsMIPvrstInstDesignatedRoot BridgeId, fsMIPvrstInstRootMaxAge Timeout, fsMIPvrstInstRootHelloTime Timeout, fsMIPvrstInstRootForwardDelay Timeout } fsMIPvrstInstVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spanning Tree Instance to which the information belongs." ::= { fsMIPvrstInstBridgeEntry 1 } fsMIPvrstInstBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION "The writable portion of the PVRST Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096." DEFVAL {32768} ::= { fsMIPvrstInstBridgeEntry 2 } fsMIPvrstInstRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Cost of the path to the PVRST Root as seen by this bridge." ::= { fsMIPvrstInstBridgeEntry 3 } fsMIPvrstInstRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Number of the Port which offers the lowest path cost from this bridge to the PVRST Root Bridge." ::= { fsMIPvrstInstBridgeEntry 4 } fsMIPvrstInstBridgeMaxAge OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-write STATUS current DESCRIPTION "Max Age of the Bridge Information" ::= { fsMIPvrstInstBridgeEntry 5 } fsMIPvrstInstBridgeHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-write STATUS current DESCRIPTION "Hello Time configured at Bridge Level" ::= { fsMIPvrstInstBridgeEntry 6 } fsMIPvrstInstBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-write STATUS current DESCRIPTION "Forward Delay for STP bridge interoperability" ::= { fsMIPvrstInstBridgeEntry 7 } fsMIPvrstInstHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hold Time for eah port" ::= { fsMIPvrstInstBridgeEntry 8 } fsMIPvrstInstTxHoldCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate." REFERENCE "IEEE 802.1w clause 17.16.6" DEFVAL { 6 } ::= { fsMIPvrstInstBridgeEntry 9 } fsMIPvrstInstTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance." ::= { fsMIPvrstInstBridgeEntry 10 } fsMIPvrstInstTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance." ::= { fsMIPvrstInstBridgeEntry 11 } fsMIPvrstInstNewRootCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event." ::= { fsMIPvrstInstBridgeEntry 12 } fsMIPvrstInstInstanceUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event." ::= { fsMIPvrstInstBridgeEntry 13 } fsMIPvrstInstInstanceDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event." ::= { fsMIPvrstInstBridgeEntry 14 } fsMIPvrstInstPortRoleSelSemState OBJECT-TYPE SYNTAX INTEGER { initbridge (0), roleselection (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge." ::= { fsMIPvrstInstBridgeEntry 15 } fsMIPvrstInstDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. " ::= { fsMIPvrstInstBridgeEntry 16 } fsMIPvrstInstRootMaxAge OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Max Age of the Root Bridge" ::= { fsMIPvrstInstBridgeEntry 17 } fsMIPvrstInstRootHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Hello Time of the Root Bridge" ::= { fsMIPvrstInstBridgeEntry 18 } fsMIPvrstInstRootForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Forward Delay of the Root Bridge" ::= { fsMIPvrstInstBridgeEntry 19 } -- ----------------------------------------------------------------- -- Future Pvrst Common Spanning Tree Port Table -- ----------------------------------------------------------------- fsMIPvrstInstPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPvrstInstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Common Spanning Tree Port Information." ::= { fsMIFuturePvrst 6 } fsMIPvrstInstPortEntry OBJECT-TYPE SYNTAX FsMIPvrstInstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every port for Each Spanning tree." INDEX { fsMIPvrstInstVlanId, fsMIPvrstInstPortIndex } ::= { fsMIPvrstInstPortTable 1 } FsMIPvrstInstPortEntry ::= SEQUENCE { fsMIPvrstInstPortIndex Integer32, fsMIPvrstInstPortEnableStatus INTEGER, fsMIPvrstInstPortPathCost Integer32, fsMIPvrstInstPortPriority Integer32, fsMIPvrstInstPortDesignatedRoot BridgeId, fsMIPvrstInstPortDesignatedBridge BridgeId, fsMIPvrstInstPortDesignatedPort OCTET STRING, fsMIPvrstInstPortOperVersion INTEGER, fsMIPvrstInstPortProtocolMigration TruthValue, fsMIPvrstInstPortState INTEGER, fsMIPvrstInstPortForwardTransitions Counter32, fsMIPvrstInstPortReceivedBpdus Counter32, fsMIPvrstInstPortRxConfigBpduCount Counter32, fsMIPvrstInstPortRxTcnBpduCount Counter32, fsMIPvrstInstPortTransmittedBpdus Counter32, fsMIPvrstInstPortTxConfigBpduCount Counter32, fsMIPvrstInstPortTxTcnBpduCount Counter32, fsMIPvrstInstPortTxSemState INTEGER, fsMIPvrstInstPortProtMigrationSemState INTEGER, fsMIPvrstInstProtocolMigrationCount Counter32, fsMIPvrstInstPortRole INTEGER, fsMIPvrstInstCurrentPortRole INTEGER, fsMIPvrstInstPortInfoSemState INTEGER, fsMIPvrstInstPortRoleTransitionSemState INTEGER, fsMIPvrstInstPortStateTransitionSemState INTEGER, fsMIPvrstInstPortTopologyChangeSemState INTEGER, fsMIPvrstInstPortEffectivePortState TruthValue, fsMIPvrstInstPortHelloTime Timeout, fsMIPvrstInstPortMaxAge Timeout, fsMIPvrstInstPortForwardDelay Timeout, fsMIPvrstInstPortHoldTime Timeout, fsMIPvrstInstPortAdminPathCost Integer32 } fsMIPvrstInstPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port Id of the port for which this entry contains spanning tree information." ::= { fsMIPvrstInstPortEntry 1 } fsMIPvrstInstPortEnableStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value for the port to configure PVRST enable/disable on this Port for this instance." ::= { fsMIPvrstInstPortEntry 2 } fsMIPvrstInstPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the Inst Root which include this port." ::= { fsMIPvrstInstPortEntry 3 } fsMIPvrstInstPortPriority OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION "The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16." DEFVAL {128} ::= { fsMIPvrstInstPortEntry 4 } fsMIPvrstInstPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge recorded as the Inst Root in the configuration BPDUs transmitted." ::= { fsMIPvrstInstPortEntry 5 } fsMIPvrstInstPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment." ::= { fsMIPvrstInstPortEntry 6 } fsMIPvrstInstPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Port identifier of the port on the Designated Bridge for this port's segment." ::= { fsMIPvrstInstPortEntry 7 } fsMIPvrstInstPortOperVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatible(0), rstp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the Port is operational in the Pvrst/Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting Pvrst/RST BPDUs or Config/TCN BPDUs." ::= { fsMIPvrstInstPortEntry 8 } fsMIPvrstInstPortProtocolMigration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Protocol migration state of this Port. When operating in RSTP/Pvrst (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs without instance information. Any other operation on this object has no effect and it always returns FALSE(2) when read." ::= { fsMIPvrstInstPortEntry 9 } fsMIPvrstInstPortState OBJECT-TYPE SYNTAX INTEGER { disabled (1), discarding (2), learning (4), forwarding (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port as defined by the Common spanning tree protocol." ::= { fsMIPvrstInstPortEntry 10 } fsMIPvrstInstPortForwardTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this port has transitioned to the Forwarding State." ::= { fsMIPvrstInstPortEntry 11 } fsMIPvrstInstPortReceivedBpdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Pvrst(RST) BPDUs received on this port." ::= { fsMIPvrstInstPortEntry 12 } fsMIPvrstInstPortRxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Configuration BPDUs received on this port." ::= { fsMIPvrstInstPortEntry 13 } fsMIPvrstInstPortRxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCN BPDUs received on this port." ::= { fsMIPvrstInstPortEntry 14 } fsMIPvrstInstPortTransmittedBpdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Pvrst(RST) BPDUs Transmitted from this port." ::= { fsMIPvrstInstPortEntry 15 } fsMIPvrstInstPortTxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Configuration BPDUs Transmitted from this port." ::= { fsMIPvrstInstPortEntry 16 } fsMIPvrstInstPortTxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCN BPDUs Transmitted from this port." ::= { fsMIPvrstInstPortEntry 17 } fsMIPvrstInstPortTxSemState OBJECT-TYPE SYNTAX INTEGER { transmitinit (0), transmitperiodic (1), transmitconfig (2), transmittcn (3), transmitrstp (4), idle (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current State of the Port Transmit state machine." ::= { fsMIPvrstInstPortEntry 18 } fsMIPvrstInstPortProtMigrationSemState OBJECT-TYPE SYNTAX INTEGER { init (0), sendrstp (1), sendingrstp (2), sendstp (3), sendingstp (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current State of the Port Protocol Migration State machine." ::= { fsMIPvrstInstPortEntry 19 } fsMIPvrstInstProtocolMigrationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/Pvrst. A Trap is generated on the occurence of this event." ::= { fsMIPvrstInstPortEntry 20 } fsMIPvrstInstPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selected Port Role of the port for this spanning tree instance." ::= { fsMIPvrstInstPortEntry 21 } fsMIPvrstInstCurrentPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Port Role of the port for this spanning tree instance." ::= { fsMIPvrstInstPortEntry 22 } -- current (6) state has been changed to present (6) state in -- PortInfoSemState as current is the keyword fsMIPvrstInstPortInfoSemState OBJECT-TYPE SYNTAX INTEGER { disabled (0), aged (1), update (2), superior (3), repeat (4), agreement(5), present (6), receive (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Information State Machine for this port in this spanning tree context." ::= { fsMIPvrstInstPortEntry 23 } fsMIPvrstInstPortRoleTransitionSemState OBJECT-TYPE SYNTAX INTEGER { init (0), blockport (1), blockedport (2), rootport(3), designatedport(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Transition State Machine for this port in this spanning tree context." ::= { fsMIPvrstInstPortEntry 24 } fsMIPvrstInstPortStateTransitionSemState OBJECT-TYPE SYNTAX INTEGER { discarding (0), learning (1), forwarding (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port State Transition State Machine for this port in this spanning tree context." ::= { fsMIPvrstInstPortEntry 25 } fsMIPvrstInstPortTopologyChangeSemState OBJECT-TYPE SYNTAX INTEGER { init (0), inactive (1), active (2), detected (3), notifiedtcn (4), notifiedtc (5), propagating (6), acknowledged (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Topology Change State Machine for this port in this spanning tree context." ::= { fsMIPvrstInstPortEntry 26 } fsMIPvrstInstPortEffectivePortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The effective operational state of the port for Inst. This will TRUE only when the port is operationally up in the Interface level and Protocol level for Inst. This is will be set to False for all other times." ::= { fsMIPvrstInstPortEntry 27 } fsMIPvrstInstPortHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second." ::= { fsMIPvrstInstPortEntry 28 } fsMIPvrstInstPortMaxAge OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Max Age of the Bridge Information" ::= { fsMIPvrstInstPortEntry 29 } fsMIPvrstInstPortForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Forward Delay for STP bridge interoperability" ::= { fsMIPvrstInstPortEntry 30 } fsMIPvrstInstPortHoldTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "Hold Time for each port" ::= { fsMIPvrstInstPortEntry 31 } fsMIPvrstInstPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost or dot1dStpPortPathCost32, which returns the operational value of the path cost. The value of this object MUST be retained across reinitializations of the management system." ::= { fsMIPvrstInstPortEntry 32 } -- TRAP MIB BEGIN fsMIFsPvrstSetGlobalTrapOption OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable Pvrst traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled" ::= { fsMIFsPvrstTrapsControl 1 } fsMIPvrstGlobalErrTrapType OBJECT-TYPE SYNTAX INTEGER { none (0), memfail (1), bufffail (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used within the Trap Notification PDU. It returns the following values none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure" ::= { fsMIFsPvrstTrapsControl 2 } fsMIFsPvrstTrapsControlTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIFsPvrstTrapsControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of per virtual bridge Trap Control Info." ::= { fsMIFsPvrstTrapsControl 3 } fsMIFsPvrstTrapsControlEntry OBJECT-TYPE SYNTAX FsMIFsPvrstTrapsControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual bridge TrapsControl information." INDEX { fsMIFuturePvrstContextId } ::= { fsMIFsPvrstTrapsControlTable 1 } FsMIFsPvrstTrapsControlEntry ::= SEQUENCE { fsMIPvrstSetTraps Integer32, fsMIPvrstGenTrapType INTEGER } fsMIPvrstSetTraps OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable context-specific Pvrst traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like port protocol migration or invalid packet rcvd in port 3 - All the above Traps " ::= { fsMIFsPvrstTrapsControlEntry 1 } fsMIPvrstGenTrapType OBJECT-TYPE SYNTAX INTEGER { none (0), up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN" ::= { fsMIFsPvrstTrapsControlEntry 2 } fsMIPvrstPortTrapNotificationTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPvrstPortTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintained per virtual context in the system." ::= { fsMIFsPvrstTrapsControl 4 } fsMIPvrstPortTrapNotificationEntry OBJECT-TYPE SYNTAX FsMIPvrstPortTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This entry is used to store the notification information" INDEX { fsMIPvrstPortTrapIndex} ::= { fsMIPvrstPortTrapNotificationTable 1 } FsMIPvrstPortTrapNotificationEntry ::= SEQUENCE { fsMIPvrstPortTrapIndex Integer32, fsMIPvrstPortMigrationType INTEGER, fsMIPvrstPktErrType INTEGER, fsMIPvrstPktErrVal Integer32 } fsMIPvrstPortTrapIndex OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, indicating the Port number." ::= { fsMIPvrstPortTrapNotificationEntry 1 } fsMIPvrstPortMigrationType OBJECT-TYPE SYNTAX INTEGER { sendstp (0), sendrstp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port Protocol migration type occured in the port" ::= { fsMIPvrstPortTrapNotificationEntry 2 } fsMIPvrstPktErrType OBJECT-TYPE SYNTAX INTEGER { protocolIdErr(0), invalidBpdu(1), configLengthErr(2), tcnLengthErr(3), rstpLengthErr(4), maxAgeErr(5), fwdDelayErr(6), helloTimeErr(7), pvrstLengthErr(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of invalid packet received in each of the port " ::= { fsMIPvrstPortTrapNotificationEntry 3 } fsMIPvrstPktErrVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error value corresponding to the above type " ::= { fsMIPvrstPortTrapNotificationEntry 4 } fsMIPvrstPortRoleTrapNotificationTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPvrstPortRoleTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to store the notification information occured in each of the port during role change." ::= { fsMIFsPvrstTrapsControl 5 } fsMIPvrstPortRoleTrapNotificationEntry OBJECT-TYPE SYNTAX FsMIPvrstPortRoleTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This entry is used to store the notification information" INDEX { fsMIPvrstPortTrapIndex, fsMIPvrstInstVlanId} ::= { fsMIPvrstPortRoleTrapNotificationTable 1 } FsMIPvrstPortRoleTrapNotificationEntry ::= SEQUENCE { fsMIPvrstPortRoleType INTEGER, fsMIPvrstOldRoleType INTEGER } fsMIPvrstPortRoleType OBJECT-TYPE SYNTAX INTEGER { disabledPort(0), alternatePort(1), backupPort(2), rootPort(3), designatedPort(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Particular Role Selected for the Port" ::= { fsMIPvrstPortRoleTrapNotificationEntry 1 } fsMIPvrstOldRoleType OBJECT-TYPE SYNTAX INTEGER { disabledPort(0), alternatePort(1), backupPort(2), rootPort(3), designatedPort(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Particular Role which is existing for the Port" ::= { fsMIPvrstPortRoleTrapNotificationEntry 2 } fsMIPvrstTraps OBJECT IDENTIFIER ::= { fsMIFuturePvrstTraps 0 } fsMIPvrstGlobalErrTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstGenTrapType, fsMIPvrstInstInstanceUpCount, fsMIPvrstInstInstanceDownCount } STATUS current DESCRIPTION "Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurs " ::= { fsMIPvrstTraps 1 } fsMIPvrstGenTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstGenTrapType } STATUS current DESCRIPTION "Generated when any of the general events like protocol up or protocol down occurs" ::= { fsMIPvrstTraps 2 } fsMIPvrstNewRootTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstInstDesignatedRoot } STATUS current DESCRIPTION "Generated whenever a new root bridge is selected in the topology " ::= { fsMIPvrstTraps 3 } fsMIPvrstTopologyChgTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstInstTopChanges } STATUS current DESCRIPTION "Generated when topology change is detected " ::= { fsMIPvrstTraps 4 } fsMIPvrstProtocolMigrationTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstPortMigrationType } STATUS current DESCRIPTION "Generated when port protocol migration happens in the port " ::= { fsMIPvrstTraps 5 } fsMIPvrstInvalidBpduRxdTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstPktErrType, fsMIPvrstPktErrVal } STATUS current DESCRIPTION "Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time" ::= { fsMIPvrstTraps 6 } fsMIPvrstNewPortRoleTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstPortRoleType, fsMIPvrstOldRoleType } STATUS current DESCRIPTION "Generated whenever a new role is selected for the port " ::= { fsMIPvrstTraps 7 } fsMIPvrstHwFailureTrap NOTIFICATION-TYPE OBJECTS { fsMIPvrstBrgAddress, fsMIPvrstContextName, fsMIPvrstInstPortState } STATUS current DESCRIPTION "Generated whenever an NPAPI call that is invoked from the protocol to program the hardware port state fails." ::= { fsMIPvrstTraps 8 } -- TRAP MIB END END