-- Automatically generated by MIB Converter ... -- ---------------------------------------------------------------------- -- scalance_x_msps.mib -- SIMATIC NET Industrial Ethernet Scalance -- MSPS Private MIB -- Copyright (c) 2012 Siemens AG -- ---------------------------------------------------------------------- -- -- MIB Module : SN-MSPS-SCX-MIB -- -- Revision : V06.02.02 -- Date : 2019-03-14 15:50:06 -- -- ---------------------------------------------------------------------- SN-MSPS-SCX-MIB DEFINITIONS ::= BEGIN IMPORTS ospfv3RouterId, ospfv3RestartStatus, ospfv3RestartInterval, ospfv3RestartExitReason, ospfv3NbrRestartHelperStatus, ospfv3NbrRestartHelperAge, ospfv3NbrRestartHelperExitReason, ospfv3VirtNbrRestartHelperStatus, ospfv3VirtNbrRestartHelperAge, ospfv3VirtNbrRestartHelperExitReason FROM OSPFV3-MIB DisplayString FROM RFC1213-MIB vrrpOperEntry FROM VRRP-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF enterprises FROM RFC1155-SMI PaeControlledPortStatus FROM IEEE8021-PAE-MIB BridgeId, Timeout FROM BRIDGE-MIB TRAP-TYPE FROM RFC-1215 InterfaceIndex, ifIndex, InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv4, InetPortNumber, InetVersion, InetZoneIndex, InetAutonomousSystemNumber, InetScopeType FROM INET-ADDRESS-MIB ospfVirtNbrEntry, AreaID, RouterID, BigMetric, Status, PositiveInteger, TOSType, ospfRouterId, ospfNbrRtrId FROM OSPF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB EnabledStatus FROM P-BRIDGE-MIB Counter32, Integer32, Unsigned32, enterprises, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, MODULE-IDENTITY, TimeTicks, IpAddress, Gauge32, Counter64, mib-2 FROM SNMPv2-SMI PortList, VlanId, dot1qVlanIndex, dot1qStaticUnicastEntry, dot1qTpFdbEntry, dot1qFdbEntry, dot1qFdbId, dot1qStaticUnicastAddress, dot1qStaticUnicastReceivePort, dot1qStaticMulticastAddress, dot1qStaticMulticastReceivePort, VlanIdOrNone, dot1qVlanStaticEntry, VlanIndex FROM Q-BRIDGE-MIB pethPsePortEntry, pethMainPseEntry FROM POWER-ETHERNET-MIB vrrpv3OperationsVrId, vrrpv3OperationsInetAddrType FROM VRRPV3-MIB RowStatus, DateAndTime, MacAddress, TruthValue, DisplayString, TEXTUAL-CONVENTION, StorageType, TimeStamp FROM SNMPv2-TC IANAipRouteProtocol, IANAipMRouteProtocol FROM IANA-RTPROTO-MIB OBJECT-TYPE FROM RFC-1212; org OBJECT IDENTIFIER ::= { iso 3} dod OBJECT IDENTIFIER ::= { org 6} internet OBJECT IDENTIFIER ::= { dod 1} private OBJECT IDENTIFIER ::= { internet 4} enterprises OBJECT IDENTIFIER ::= { private 1} siemens OBJECT IDENTIFIER ::= { enterprises 4329} industrialComProducts OBJECT IDENTIFIER ::= { siemens 20} iComPlatforms OBJECT IDENTIFIER ::= { industrialComProducts 1} simaticNet OBJECT IDENTIFIER ::= { iComPlatforms 1} snMsps OBJECT IDENTIFIER ::= { simaticNet 1} snMspsCommon OBJECT IDENTIFIER ::= { snMsps 1} snMspsModules OBJECT IDENTIFIER ::= { snMsps 3} snMspsTrapPrefix OBJECT IDENTIFIER ::= { snMsps 0} snMspsAcl OBJECT IDENTIFIER ::= { snMspsCommon 30} snMspsCableTester OBJECT IDENTIFIER ::= { snMspsCommon 44} snMspsConfig OBJECT IDENTIFIER ::= { snMspsCommon 1} snMspsCplug OBJECT IDENTIFIER ::= { snMspsCommon 23} snMspsDas OBJECT IDENTIFIER ::= { snMspsCommon 83} snMspsDhcp OBJECT IDENTIFIER ::= { snMspsCommon 17} snMspsDiagnostics OBJECT IDENTIFIER ::= { snMspsCommon 79} snMspsDns OBJECT IDENTIFIER ::= { snMspsCommon 49} snMspsDot1ad OBJECT IDENTIFIER ::= { snMspsCommon 81} snMspsDst OBJECT IDENTIFIER ::= { snMspsCommon 54} snMspsEthernetIp OBJECT IDENTIFIER ::= { snMspsCommon 62} snMspsGeneral OBJECT IDENTIFIER ::= { snMspsCommon 2} snMspsGuestVlan OBJECT IDENTIFIER ::= { snMspsCommon 55} snMspsHttp OBJECT IDENTIFIER ::= { snMspsCommon 20} snMspsIf OBJECT IDENTIFIER ::= { snMspsCommon 34} snMspsIp OBJECT IDENTIFIER ::= { snMspsCommon 13} snMspsIp6 OBJECT IDENTIFIER ::= { snMspsCommon 65} snMspsIpACD OBJECT IDENTIFIER ::= { snMspsCommon 63} snMspsKeyPlug OBJECT IDENTIFIER ::= { snMspsCommon 35} snMspsLa OBJECT IDENTIFIER ::= { snMspsCommon 5} snMspsLinkCheck OBJECT IDENTIFIER ::= { snMspsCommon 82} snMspsLoadSave OBJECT IDENTIFIER ::= { snMspsCommon 26} snMspsLog OBJECT IDENTIFIER ::= { snMspsCommon 31} snMspsLoopDetection OBJECT IDENTIFIER ::= { snMspsCommon 36} snMspsMacAuth OBJECT IDENTIFIER ::= { snMspsCommon 56} snMspsMgmdMIB OBJECT IDENTIFIER ::= { snMspsCommon 77} snMspsMsdpMIB OBJECT IDENTIFIER ::= { snMspsCommon 78} snMspsMstp OBJECT IDENTIFIER ::= { snMspsCommon 6} snMspsNatv2 OBJECT IDENTIFIER ::= { snMspsCommon 75} snMspsNfc OBJECT IDENTIFIER ::= { snMspsCommon 57} snMspsNtp OBJECT IDENTIFIER ::= { snMspsCommon 33} snMspsOspf OBJECT IDENTIFIER ::= { snMspsCommon 42} snMspsOspf3 OBJECT IDENTIFIER ::= { snMspsCommon 66} snMspsPimMIB OBJECT IDENTIFIER ::= { snMspsCommon 76} snMspsPnac OBJECT IDENTIFIER ::= { snMspsCommon 10} snMspsPnio OBJECT IDENTIFIER ::= { snMspsCommon 32} snMspsPoe OBJECT IDENTIFIER ::= { snMspsCommon 38} snMspsPort OBJECT IDENTIFIER ::= { snMspsCommon 29} snMspsPtp OBJECT IDENTIFIER ::= { snMspsCommon 37} snMspsQos OBJECT IDENTIFIER ::= { snMspsCommon 22} snMspsRadius OBJECT IDENTIFIER ::= { snMspsCommon 11} snMspsRedundancy OBJECT IDENTIFIER ::= { snMspsCommon 24} snMspsReport OBJECT IDENTIFIER ::= { snMspsCommon 28} snMspsRip OBJECT IDENTIFIER ::= { snMspsCommon 41} snMspsRip6 OBJECT IDENTIFIER ::= { snMspsCommon 67} snMspsRmon OBJECT IDENTIFIER ::= { snMspsCommon 12} snMspsRouteMap OBJECT IDENTIFIER ::= { snMspsCommon 53} snMspsSfp OBJECT IDENTIFIER ::= { snMspsCommon 46} snMspsSinema OBJECT IDENTIFIER ::= { snMspsCommon 25} snMspsSnmp OBJECT IDENTIFIER ::= { snMspsCommon 4} snMspsSnooping OBJECT IDENTIFIER ::= { snMspsCommon 9} snMspsSntp OBJECT IDENTIFIER ::= { snMspsCommon 19} snMspsSyslog OBJECT IDENTIFIER ::= { snMspsCommon 21} snMspsTc OBJECT IDENTIFIER ::= { snMspsModules 1} snMspsVlan OBJECT IDENTIFIER ::= { snMspsCommon 3} snMspsVrrp OBJECT IDENTIFIER ::= { snMspsCommon 43} snMspsVrrpv3 OBJECT IDENTIFIER ::= { snMspsCommon 59} snMspsDNSClient OBJECT IDENTIFIER ::= { snMspsDns 3} snMspsDhcpClient OBJECT IDENTIFIER ::= { snMspsDhcp 1} snMspsDhcpClient6 OBJECT IDENTIFIER ::= { snMspsDhcp 4} snMspsDhcpRelay OBJECT IDENTIFIER ::= { snMspsDhcp 3} snMspsDhcpRelay6 OBJECT IDENTIFIER ::= { snMspsDhcp 6} snMspsDhcpServer OBJECT IDENTIFIER ::= { snMspsDhcp 2} snMspsQosCos OBJECT IDENTIFIER ::= { snMspsQos 3} snMspsQosDscp OBJECT IDENTIFIER ::= { snMspsQos 4} snMspsRadiusServer OBJECT IDENTIFIER ::= { snMspsRadius 2} snMspsRedundancyExt OBJECT IDENTIFIER ::= { snMspsRedundancy 4} snMspsRingRedundancy OBJECT IDENTIFIER ::= { snMspsRedundancy 1} snMspsRingRedundancyMrpIntercon OBJECT IDENTIFIER ::= { snMspsRedundancy 5} snMspsRingRedundancyObserver OBJECT IDENTIFIER ::= { snMspsRedundancy 3} snMspsRingRedundancyStandby OBJECT IDENTIFIER ::= { snMspsRedundancy 2} snMspsSntpClient OBJECT IDENTIFIER ::= { snMspsSntp 1} snMspsSyslogClient OBJECT IDENTIFIER ::= { snMspsSyslog 1} SnMspsOrderNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The format of type identification / order numbers of Siemens MSPS products." SYNTAX OCTET STRING (SIZE (1|5..32)) SnMspsSerialNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The format of serial numbers of Siemens MSPS products." SYNTAX OCTET STRING (SIZE (1|5..32)) SnMspsVersionNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The version format of Siemens MSPS in a simplified OSLO form : [RCSTBPVKD][0-9]{1,2}\.[0-9]{1,2}\.[0-9]{1,2} " SYNTAX OCTET STRING (SIZE (5..32)) SnMspsMacAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " A six octet string (48-bit), using the hexadecimal representation, in canonical order specified by IEEE Std 802 (Overview and Architecture, formerly IEEE Std 802.1a). Shorter MAC address values than 48 bits, if used, are represented by setting their unused upper octets to all 0's, i.e., the 16-bit address AAFF shall be represented as 00000000AAFF. " SYNTAX OCTET STRING (SIZE (6)) SnMspsIpAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " An octet string which represents either a IPv4 address or a IPv6a ddress or a DNS compliant name. " SYNTAX OCTET STRING SnMspsStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A uniform representation of status values." SYNTAX INTEGER { invalid(0), enable(1), disable(2) } SnMspsTrigger ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A uniform representation of trigger values" SYNTAX INTEGER { trigger(1), notTriggered(2) } SnMspsFunctionString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.13. The value shall be filled with blanks if it is shorter than 32. Non-printable characters and control sequences are not allowed. " SYNTAX DisplayString (SIZE (32)) SnMspsLocationString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.14. The value shall be filled with blanks if it is shorter than 22. Non-printable characters and control sequences are not allowed. " SYNTAX DisplayString (SIZE (22)) -- ---------------------------------------------------------------- -- MSPS General Groups -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS General Objects -- ---------------------------------------------------------------- snMspsGeneralDeviceType OBJECT-TYPE SYNTAX DisplayString (SIZE (10..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device Type of current product. This value is the part of fully-qualified domain name, which is stored in sys-Name. " ::= { snMspsGeneral 5 } snMspsGeneralDeviceGroup OBJECT-TYPE SYNTAX DisplayString (SIZE (10..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The group name of the device, which is used as a part of the cplug device's identification data" ::= { snMspsGeneral 10 } snMspsGeneralHwVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsGeneralHwVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains version informations of all hardware (basic device and extension cards), which are currently available on the device." ::= { snMspsGeneral 20 } snMspsGeneralHwVersionEntry OBJECT-TYPE SYNTAX SnMspsGeneralHwVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each hardware in the system, which has a MLFB number." INDEX { snMspsGeneralHwVersionTableIndex } ::= { snMspsGeneralHwVersionTable 1 } SnMspsGeneralHwVersionEntry ::= SEQUENCE { snMspsGeneralHwVersionTableIndex INTEGER, snMspsGeneralHwType DisplayString, snMspsGeneralHwName DisplayString, snMspsGeneralHwRevision DisplayString, snMspsGeneralHwOrderId SnMspsOrderNumber } snMspsGeneralHwVersionTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index correlates with entPhysicalIndex from entPhysicalTable (ENTITY-MIB)." ::= { snMspsGeneralHwVersionEntry 1 } snMspsGeneralHwType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of hardware in readable format." ::= { snMspsGeneralHwVersionEntry 2 } snMspsGeneralHwName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of hardware in readable format." ::= { snMspsGeneralHwVersionEntry 3 } snMspsGeneralHwRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of hardware revision." ::= { snMspsGeneralHwVersionEntry 4 } snMspsGeneralHwOrderId OBJECT-TYPE SYNTAX SnMspsOrderNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Order ID of hardware." ::= { snMspsGeneralHwVersionEntry 5 } snMspsGeneralSwVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsGeneralSwVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains version informations of software, which is currently running on relevant hardware (basic device and extension cards)." ::= { snMspsGeneral 25 } snMspsGeneralSwVersionEntry OBJECT-TYPE SYNTAX SnMspsGeneralSwVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each software running in the system. Since the same kinds of software could run on different hardware, which is available on the device, the index from 'snMspsGeneralHwVersionTable' is also used here." INDEX { snMspsGeneralHwVersionTableIndex, snMspsGeneralSwVersionTableIndex } ::= { snMspsGeneralSwVersionTable 1 } SnMspsGeneralSwVersionEntry ::= SEQUENCE { snMspsGeneralSwVersionTableIndex INTEGER, snMspsGeneralSwType DisplayString, snMspsGeneralSwRevision SnMspsVersionNumber, snMspsGeneralSwDate DateAndTime, snMspsGeneralSwDescription DisplayString } snMspsGeneralSwVersionTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The numerical index of software, which is available on relevant hardware." ::= { snMspsGeneralSwVersionEntry 1 } snMspsGeneralSwType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of software in readable format." ::= { snMspsGeneralSwVersionEntry 2 } snMspsGeneralSwRevision OBJECT-TYPE SYNTAX SnMspsVersionNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of software revision." ::= { snMspsGeneralSwVersionEntry 3 } snMspsGeneralSwDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The revision date of software." ::= { snMspsGeneralSwVersionEntry 4 } snMspsGeneralSwDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The description of software." ::= { snMspsGeneralSwVersionEntry 5 } snMspsConfigLoginAuthentication OBJECT-TYPE SYNTAX INTEGER { local(1), remoteRadius(2), remoteTacacs(3), radiusFallbackToLocal(4), tacacsFallbackToLocal(5), localFallbackToRadius(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the mechanism by which the user login has to be authenticated for accessing the GUI to manage the switch. Authentication is done either locally or in the remote side through a RADIUS Server or TACACS. If Authentication is configured as radiusLocal or tacacsLocal then Local authentication provides a back door or a secondary option for authentication if the server fails." DEFVAL { local } ::= { snMspsConfig 1 } ------ Config Control Group ------------------------------------ snMspsConfigCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch." ::= { snMspsConfig 2 } snMspsConfigCtrlEntry OBJECT-TYPE SYNTAX SnMspsConfigCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each interface in the system. In addition to that an entry with index '0' is created in this table by default. If 'snMspsConfigCtrlStatus' of the entry '0' is made 'valid', then global control is chosen and the values against entry '0' is applicable for all the interfaces of the switch. If 'snMspsConfigCtrlStatus' of the entry '0' is made 'invalid', then interface-wise control is chosen & the values against each interface index is applicable for that interface. At a particular point of time, either global control will be applicable or interface-wise control is applicable. Both will not be considered together. Index to the table is the interface index of the port." INDEX { snMspsConfigCtrlIndex } ::= { snMspsConfigCtrlTable 1 } SnMspsConfigCtrlEntry ::= SEQUENCE { snMspsConfigCtrlIndex Integer32, snMspsConfigCtrlEgressStatus INTEGER, snMspsConfigCtrlStatsCollection INTEGER, snMspsConfigCtrlStatus INTEGER } snMspsConfigCtrlIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index '0', that configuration will be considered as global configuration and is applicable for all the interfaces of the switch." ::= { snMspsConfigCtrlEntry 1 } snMspsConfigCtrlEgressStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the transmission of egress traffic over this interface. This value for entry '0' controls the egress traffic over all interfaces." DEFVAL { enabled } ::= { snMspsConfigCtrlEntry 2 } snMspsConfigCtrlStatsCollection OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables statistics collection for this interface. This value for entry '0' controls the stats collection for all interfaces." DEFVAL { enabled } ::= { snMspsConfigCtrlEntry 3 } snMspsConfigCtrlStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Speficies the validity of the entry. If the 'Config Control Status' for entry '0' is made 'valid', then global control is chosen in the system. It signifies that the values against entry '0' is applicable for all the interfaces of the switch. If the 'Config Control Status' for entry '0' is made 'invalid', then interface-wise control is chosen. Then the values against each interface index is applicable for that interface. By default, 'snMspsConfigCtrlStatus' will be 'invalid' for entry '0' and 'valid' for all other entries. (ie) by default, interface-wise configuration is enabled in the system. The status of entries other than the zeroth(0th) entry can not be made 'invalid'." ::= { snMspsConfigCtrlEntry 4 } -- Rate Control Group --------------------------------------------- -- snMspsConfigRateCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigRateCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch." ::= { snMspsConfig 3 } snMspsConfigRateCtrlEntry OBJECT-TYPE SYNTAX SnMspsConfigRateCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each physical and port-channel interface in the switch." INDEX { snMspsConfigRateCtrlIndex } ::= { snMspsConfigRateCtrlTable 1 } SnMspsConfigRateCtrlEntry ::= SEQUENCE { snMspsConfigRateCtrlIndex Integer32, snMspsConfigRateCtrlDLFLimitValue Integer32, snMspsConfigRateCtrlBCASTLimitValue Integer32, snMspsConfigRateCtrlMCASTLimitValue Integer32, snMspsConfigRateCtrlPortRateLimit Integer32, snMspsConfigRateCtrlPortBurstSize Integer32, snMspsConfigRateCtrlUCASTLimitValue Integer32 } snMspsConfigRateCtrlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index for which the configuration in this entry applies." ::= { snMspsConfigRateCtrlEntry 1 } snMspsConfigRateCtrlDLFLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of dlf data that can be transmitted per second over this interface. The unit of data is given by snMspsConfigRateCtrlUnit object. Setting this object to the value zero disables rate limiting for Destination lookup failure packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigRateCtrlEntry 2 } snMspsConfigRateCtrlBCASTLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of broadcast data that can be transmitted per second over this interface. The unit of data is given by snMspsConfigRateCtrlUnit object. Setting this object to the value zero disables rate limiting for Broadcast packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigRateCtrlEntry 3 } snMspsConfigRateCtrlMCASTLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of multicast data that can be transmitted per second over this interface. The unit of data is given by snMspsConfigRateCtrlUnit object. Setting this object to the value zero disables rate limiting for Multicast packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigRateCtrlEntry 4} snMspsConfigRateCtrlPortRateLimit OBJECT-TYPE SYNTAX Integer32 (0..80000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed." ::= { snMspsConfigRateCtrlEntry 5 } snMspsConfigRateCtrlPortBurstSize OBJECT-TYPE SYNTAX Integer32 (0..80000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interface speed. Based on the operating speed of the port, the burst size of the port will be applied. This value can also be affected by the metering. A value of zero(0) disable burst rate limiting i.e. sets the port burst rate limit to full speed." ::= { snMspsConfigRateCtrlEntry 6 } snMspsConfigRateCtrlUCASTLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of unicast data that can be transmitted per second over this interface. The unit of data is given by snMspsConfigRateCtrlUnit object. Setting this object to the value zero disables rate limiting for Multicast packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigRateCtrlEntry 7} -- Rate Control Group --------------------------------------------- -- snMspsConfigAclRateCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigAclRateCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. Chip-Dependent!" ::= { snMspsConfig 4 } snMspsConfigAclRateCtrlEntry OBJECT-TYPE SYNTAX SnMspsConfigAclRateCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each physical and port-channel interface in the switch." INDEX { snMspsConfigAclRateCtrlIndex } ::= { snMspsConfigAclRateCtrlTable 1 } SnMspsConfigAclRateCtrlEntry ::= SEQUENCE { snMspsConfigAclRateCtrlIndex Integer32, snMspsConfigAclRateCtrlDLFLimitValue Integer32, snMspsConfigAclRateCtrlBCASTLimitValue Integer32, snMspsConfigAclRateCtrlMCASTLimitValue Integer32, snMspsConfigAclRateCtrlPortRateLimit Integer32, snMspsConfigAclRateCtrlPortBurstSize Integer32 } snMspsConfigAclRateCtrlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index for which the configuration in this entry applies." ::= { snMspsConfigAclRateCtrlEntry 1 } snMspsConfigAclRateCtrlDLFLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Destination lookup failure packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigAclRateCtrlEntry 2 } snMspsConfigAclRateCtrlBCASTLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Broadcast packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigAclRateCtrlEntry 3 } snMspsConfigAclRateCtrlMCASTLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Multicast packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigAclRateCtrlEntry 4} snMspsConfigAclRateCtrlPortRateLimit OBJECT-TYPE SYNTAX Integer32 (0..80000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed." ::= { snMspsConfigAclRateCtrlEntry 5 } snMspsConfigAclRateCtrlPortBurstSize OBJECT-TYPE SYNTAX Integer32 (0..80000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interface speed. Based on the operating speed of the port, the burst size of the port will be applied. This value can also be affected by the metering. A value of zero(0) disable burst rate limiting i.e. sets the port burst rate limit to full speed." ::= { snMspsConfigAclRateCtrlEntry 6 } -- Port Control Table snMspsConfigPortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigPortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control the port specific parameters of the device like speed, duplex mode, etc." ::= { snMspsConfig 5 } snMspsConfigPortCtrlEntry OBJECT-TYPE SYNTAX SnMspsConfigPortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each interface in the system. Index to the table is the interface index of the port." INDEX { snMspsConfigPortCtrlIndex } ::= { snMspsConfigPortCtrlTable 1 } SnMspsConfigPortCtrlEntry ::= SEQUENCE { snMspsConfigPortCtrlIndex Integer32, snMspsConfigPortCtrlMode INTEGER, snMspsConfigPortCtrlDuplex INTEGER, snMspsConfigPortCtrlSpeed INTEGER, snMspsConfigPortCtrlFlowControl INTEGER, snMspsConfigPortCtrlRenegotiate INTEGER, snMspsConfigPortCtrlMaxMacAddr Integer32, snMspsConfigPortCtrlMaxMacAction INTEGER, snMspsConfigPortHOLBlockPrevention INTEGER } snMspsConfigPortCtrlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of the port for which the configuration in this entry applies." ::= { snMspsConfigPortCtrlEntry 1 } snMspsConfigPortCtrlMode OBJECT-TYPE SYNTAX INTEGER { auto (1), noNegotiation (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as 'full-duplex' or 'half-duplex' and about flow contol. If set as 'nonegotiation', the configured values for interface speed, duplex mode and flow control will be effective." DEFVAL { auto } ::= { snMspsConfigPortCtrlEntry 2 } snMspsConfigPortCtrlDuplex OBJECT-TYPE SYNTAX INTEGER { full (1), half (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer" ::= { snMspsConfigPortCtrlEntry 3 } snMspsConfigPortCtrlSpeed OBJECT-TYPE SYNTAX INTEGER { tenMBPS (1), hundredMBPS (2), oneGB (3), tenGB (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer" ::= { snMspsConfigPortCtrlEntry 4 } snMspsConfigPortCtrlFlowControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer" ::= { snMspsConfigPortCtrlEntry 5 } snMspsConfigPortCtrlRenegotiate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'." DEFVAL { false } ::= { snMspsConfigPortCtrlEntry 6 } snMspsConfigPortCtrlMaxMacAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of new MAC addresses that can be learnt over the interface." ::= { snMspsConfigPortCtrlEntry 7 } snMspsConfigPortCtrlMaxMacAction OBJECT-TYPE SYNTAX INTEGER { drop (1), purgeLRU (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the packet with new mac address will be dropped once the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'purgeLRU', the 'Least Recently Used' mac address will be deleted from the MAC table and the new mac address will be added." ::= { snMspsConfigPortCtrlEntry 8 } snMspsConfigPortHOLBlockPrevention OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Head-Of-Line Blocking prevention on a port." DEFVAL { enabled } ::= { snMspsConfigPortCtrlEntry 9 } -- Mirror Group ------------------------------------------------------ snMspsConfigMirror OBJECT IDENTIFIER ::= { snMspsConfig 6 } snMspsConfigMirrorStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable mirroring feature in hardware. When set to 'disabled (1)', all mirroring configurations will be removed from hardware. When set to 'enabled (2)', all mirroring configurations present in software will be programmed in hardware." DEFVAL { disabled } ::= { snMspsConfigMirror 1 } snMspsConfigMirrorToPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port to which the active mirrored traffic controlled by snMspsConfigMirrorCtrlTable is to be copied." ::= { snMspsConfigMirror 2 } -- Mirror Control Table snMspsConfigMirrorCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control mirroring features for each interface in the switch. Parameters in this table are valid only when the 'snMspsConfigMirrorStatus' for the switch is not 'disabled'." ::= { snMspsConfigMirror 3 } snMspsConfigMirrorCtrlEntry OBJECT-TYPE SYNTAX SnMspsConfigMirrorCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each interface in the system." INDEX { snMspsConfigMirrorCtrlIndex } ::= { snMspsConfigMirrorCtrlTable 1 } SnMspsConfigMirrorCtrlEntry ::= SEQUENCE { snMspsConfigMirrorCtrlIndex Integer32, snMspsConfigMirrorCtrlIngressMirroring INTEGER, snMspsConfigMirrorCtrlEgressMirroring INTEGER, snMspsConfigMirrorCtrlStatus INTEGER } snMspsConfigMirrorCtrlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of the port for which the configuration in this entry applies." ::= { snMspsConfigMirrorCtrlEntry 1 } snMspsConfigMirrorCtrlIngressMirroring OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port." DEFVAL { disabled } ::= { snMspsConfigMirrorCtrlEntry 2 } snMspsConfigMirrorCtrlEgressMirroring OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port." DEFVAL { disabled } ::= { snMspsConfigMirrorCtrlEntry 3 } snMspsConfigMirrorCtrlStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the validity of the entry." ::= { snMspsConfigMirrorCtrlEntry 4 } -- Mirror Control Extension Table -- snMspsConfigMirror 4 Reserved for future extensions -- snMspsConfigMirror 5 Reserved for future extensions snMspsConfigMirrorCtrlExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table is used to configure advanced mirroring features like - Port Based Mirroring: - flow based mirroring - vlan based mirroring Following are the configuration details for Port based mirroring: To configure source ports in a session - snMspsConfigMirrorCtrlExtnMirrType - is set to portBased - snMspsConfigMirrorCtrlExtnSrcTable - should be used to configure list of source ports to be mirrored in a session - snMspsConfigMirrorCtrlExtnSrcId - represents the source port. The port Id to be mirrored should be given here. - snMspsConfigMirrorCtrlExtnSrcCfg - this object is used to add/remove a port in the source port list Example To create a session 1 with source ports 5,6 following sequence of configuration should be followed For table snMspsConfigMirrorCtrlExtnTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnMirrType = portBased For table snMspsConfigMirrorCtrlExtnSrcTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnSrcId = 5 as index snMspsConfigMirrorCtrlExtnSrcCfg = add snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnSrcId = 6 as index snMspsConfigMirrorCtrlExtnSrcCfg = add To configure destination ports in a session - snMspsConfigMirrorCtrlExtnDestinationTable - should be used to configure list of destination ports to be mirrored in a session - snMspsConfigMirrorCtrlExtnDestination - represents the destination port. The port Id to which packets should be mirrored should be given here. - snMspsConfigMirrorCtrlExtnDestCfg - this object is used to add/remove a port in the source port list. Example To create a session 1 with destination port 10,11 following sequence of configuration should be followed For table snMspsConfigMirrorCtrlExtnTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnMirrType = portBased For table snMspsConfigMirrorCtrlExtnDestinationTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnDestination = 10 as index snMspsConfigMirrorCtrlExtnDestCfg = add snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnDestination = 11 as index snMspsConfigMirrorCtrlExtnDestCfg = add To Activate a session - snMspsConfigMirrorCtrlExtnStatus - should be used to activate/deactivate mirroring for a session Example To enable mirroring for a session following sequence of configuration should be followed For table snMspsConfigMirrorCtrlExtnTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnStatus = active Above configurations applies to flow based mirroring also, the snMspsConfigMirrorCtrlExtnSrcId used above for configuratin ports should be used to configure flow Id To enable remote monitoring of sources for a session - snMspsConfigMirrorCtrlExtnRSpanStatus - should be used to enable/disable remote monitoring for a session it can be used to set a session as source rspan session which implies source entities for this session are monitored remotely or can be used to set a session as destination rspan session which implies that mirrored data is received for this session should be forwarded to destination entities of this session - snMspsConfigMirrorCtrlExtnRSpanVlanId - it is the vlan id which is reserved in the network to carry Mirrored data,if the session is configured as source rspan session then data mirrored for the source entities will be forwarded on this vlan if the session is configured as destination rspan session then data received on this vlan will be forwarded to the destination entities of this session Following are the configuration details for configurating Vlan based mirroring: To configure vlans as source for a session - snMspsConfigMirrorCtrlExtnMirrType - is set to vlanBased - snMspsConfigMirrorCtrlExtnSrcVlanTable - should be used to configure list of source vlans to be mirrored in a session - snMspsConfigMirrorCtrlExtnSrcVlanId - represents a source vlan. The vlan to be mirrored should be given here. - snMspsConfigMirrorCtrlExtnSrcVlanCfg - this object is used to add/remove a vlan in the source vlan list Example To create a session 1 with source list as vlan 5,6 belonging to context 1 following sequence of configuration should be followed For table snMspsConfigMirrorCtrlExtnTable snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnMirrType = vlanBased For table snMspsConfigMirrorCtrlExtnSrcVlanTable snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnSrcVlanId = 5 as index snMspsConfigMirrorCtrlExtnSrcVlanCfg = add snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index snMspsConfigMirrorCtrlExtnSrcVlanId = 6 as index snMspsConfigMirrorCtrlExtnSrcVlanCfg = add Entries for this table can be configured only when snMspsConfigMirrorStatus is set to enabled. Configurations done through 'snMspsConfigMirrorCtrlTable' will change the following for the first session on this table: - Mirroring type will be changed to port-based - Mode and Source entities will be overwritten with the values configured through 'snMspsConfigMirrorCtrlTable' - Destination entities will be overwritten with the value configured through 'snMspsConfigMirrorToPort' object " ::= { snMspsConfigMirror 6 } snMspsConfigMirrorCtrlExtnEntry OBJECT-TYPE SYNTAX SnMspsConfigMirrorCtrlExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each session in the system." INDEX { snMspsConfigMirrorCtrlExtnSessionIndex} ::= { snMspsConfigMirrorCtrlExtnTable 1 } SnMspsConfigMirrorCtrlExtnEntry ::= SEQUENCE { snMspsConfigMirrorCtrlExtnSessionIndex Integer32, snMspsConfigMirrorCtrlExtnMirrType INTEGER, snMspsConfigMirrorCtrlExtnRSpanStatus INTEGER, snMspsConfigMirrorCtrlExtnRSpanVlanId Integer32, snMspsConfigMirrorCtrlExtnRSpanContext Integer32, snMspsConfigMirrorCtrlExtnStatus RowStatus, snMspsConfigMirrorCtrlExtnHardwareIndex Integer32 } snMspsConfigMirrorCtrlExtnSessionIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the mirroring session for which the configuration in this entry applies." ::= { snMspsConfigMirrorCtrlExtnEntry 1 } snMspsConfigMirrorCtrlExtnMirrType OBJECT-TYPE SYNTAX INTEGER{ portBased(1), mac-flowBased(2), vlanBased(3), invalid(4), ip-flowBased(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object tells the type of mirroring this session supports. This object needs to be set before doing any configuration for a mirroring session" DEFVAL { invalid } ::= { snMspsConfigMirrorCtrlExtnEntry 2 } snMspsConfigMirrorCtrlExtnRSpanStatus OBJECT-TYPE SYNTAX INTEGER{ sourceRSpanVlan(1), destinationRSpanVlan(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates session is enabled or disabled for Remote monitoring. If set as 'source-rspan-vlanid' indicates that the session is enabled for Remote monitoring and the source entities for this session will be remotely monitored. If set as 'destination-rspan-vlanid' indicates that the session should monitor remote traffic mirrored with RSPAN VLAN ID tag. RSPAN VLAN ID should be configured through object 'snMspsConfigMirrorCtrlExtnRSpanVlanId'. If set as 'disabled' Remote monitoring is disabled for this mirroring session." DEFVAL { disabled } ::= { snMspsConfigMirrorCtrlExtnEntry 3 } snMspsConfigMirrorCtrlExtnRSpanVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan Id used for Remote monitoring for this session. If snMspsConfigMirrorCtrlExtnRSpanStatus is set to disabled, then this object will have an invalid value (zero)" DEFVAL { 0 } ::= { snMspsConfigMirrorCtrlExtnEntry 4 } snMspsConfigMirrorCtrlExtnRSpanContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Context Id to which the RSpan Vlan belongs. Value '0' mean this object is not considered for this mirroring session." DEFVAL { 0 } ::= { snMspsConfigMirrorCtrlExtnEntry 5 } snMspsConfigMirrorCtrlExtnStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of the entry. The entry can be made active only if snMspsConfigMirrorCtrlExtnMirrType is configured and source and destination entries for this sesion is also configured" ::= { snMspsConfigMirrorCtrlExtnEntry 6 } snMspsConfigMirrorCtrlExtnHardwareIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Hardware Index associated with this mirroring session. Value '0' mean this object is not applicable for this mirroring session." ::= { snMspsConfigMirrorCtrlExtnEntry 7 } snMspsConfigMirrorCtrlExtnSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure list of source entities for mirroring sessions" ::= { snMspsConfigMirror 7 } snMspsConfigMirrorCtrlExtnSrcEntry OBJECT-TYPE SYNTAX SnMspsConfigMirrorCtrlExtnSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each mirroring session." INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcId } ::= { snMspsConfigMirrorCtrlExtnSrcTable 1 } SnMspsConfigMirrorCtrlExtnSrcEntry ::= SEQUENCE { snMspsConfigMirrorCtrlExtnSrcId Integer32, snMspsConfigMirrorCtrlExtnSrcCfg INTEGER, snMspsConfigMirrorCtrlExtnSrcMode INTEGER } snMspsConfigMirrorCtrlExtnSrcId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the source id which participates in a mirroring session. For Port based mirroring this object can be port IfIndex. To mirror Tunnel and Trunk ports the same Id can be used for specifying Tunnel/Trunk Id. For Flow based mirroring this object can be Acl Ids." ::= { snMspsConfigMirrorCtrlExtnSrcEntry 1 } snMspsConfigMirrorCtrlExtnSrcCfg OBJECT-TYPE SYNTAX INTEGER{ add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create/delete a source entry for a session." ::= { snMspsConfigMirrorCtrlExtnSrcEntry 2 } snMspsConfigMirrorCtrlExtnSrcMode OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides control to set the mode of mirroring. It can be ingerss,Egress or Both." DEFVAL { both } ::= { snMspsConfigMirrorCtrlExtnSrcEntry 3 } snMspsConfigMirrorCtrlExtnSrcVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure list of vlan source entities for mirroring sessions" ::= { snMspsConfigMirror 8 } snMspsConfigMirrorCtrlExtnSrcVlanEntry OBJECT-TYPE SYNTAX SnMspsConfigMirrorCtrlExtnSrcVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each mirroring session." INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcVlanContext, snMspsConfigMirrorCtrlExtnSrcVlanId } ::= { snMspsConfigMirrorCtrlExtnSrcVlanTable 1 } SnMspsConfigMirrorCtrlExtnSrcVlanEntry ::= SEQUENCE { snMspsConfigMirrorCtrlExtnSrcVlanContext Integer32, snMspsConfigMirrorCtrlExtnSrcVlanId Integer32, snMspsConfigMirrorCtrlExtnSrcVlanCfg INTEGER, snMspsConfigMirrorCtrlExtnSrcVlanMode INTEGER } snMspsConfigMirrorCtrlExtnSrcVlanContext OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Context Id to which the source entity belongs, this is used in case of specifying vlan as source. Value '-1' mean this object is not considered for this mirroring session." ::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 1 } snMspsConfigMirrorCtrlExtnSrcVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Vlan id which participates in a mirroring session." ::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 2 } snMspsConfigMirrorCtrlExtnSrcVlanCfg OBJECT-TYPE SYNTAX INTEGER{ add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create/delete a vlan entry for a session." ::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 3 } snMspsConfigMirrorCtrlExtnSrcVlanMode OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides control to set the mode of mirroring. It can be ingerss,Egress or Both." DEFVAL { both } ::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 4 } snMspsConfigMirrorCtrlExtnDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure list of destination entities" ::= { snMspsConfigMirror 9 } snMspsConfigMirrorCtrlExtnDestinationEntry OBJECT-TYPE SYNTAX SnMspsConfigMirrorCtrlExtnDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each destination entity in a mirroring session." INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnDestination } ::= { snMspsConfigMirrorCtrlExtnDestinationTable 1 } SnMspsConfigMirrorCtrlExtnDestinationEntry ::= SEQUENCE { snMspsConfigMirrorCtrlExtnDestination Integer32, snMspsConfigMirrorCtrlExtnDestCfg INTEGER } snMspsConfigMirrorCtrlExtnDestination OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the destination port id which participates in a mirroring session." ::= { snMspsConfigMirrorCtrlExtnDestinationEntry 1 } snMspsConfigMirrorCtrlExtnDestCfg OBJECT-TYPE SYNTAX INTEGER{ add (1), delete (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create/delete a destination entry for a session." ::= { snMspsConfigMirrorCtrlExtnDestinationEntry 2 } -- Network Group -------------------------------------------------- snMspsConfigNetwork OBJECT IDENTIFIER ::= { snMspsConfig 7 } snMspsConfigL2FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure L2 filter rules in the system." ::= { snMspsConfigNetwork 1 } snMspsConfigL2FilterEntry OBJECT-TYPE SYNTAX SnMspsConfigL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number." INDEX { snMspsConfigL2FilterNo} ::= { snMspsConfigL2FilterTable 1 } SnMspsConfigL2FilterEntry ::= SEQUENCE { snMspsConfigL2FilterNo Integer32, snMspsConfigL2FilterPriority Integer32, snMspsConfigL2FilterEtherType Integer32, snMspsConfigL2FilterProtocolType Unsigned32, snMspsConfigL2FilterDstMacAddr MacAddress, snMspsConfigL2FilterSrcMacAddr MacAddress, snMspsConfigL2FilterVlanId Integer32, snMspsConfigL2FilterInPortList PortList, snMspsConfigL2FilterAction INTEGER, snMspsConfigL2FilterMatchCount Counter32, snMspsConfigL2FilterStatus RowStatus, snMspsConfigL2FilterOutPortList PortList, snMspsConfigL2FilterDirection INTEGER } snMspsConfigL2FilterNo OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2 Filter rule number." ::= { snMspsConfigL2FilterEntry 1 } snMspsConfigL2FilterPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the L2 filter can be used to decide which filter rule is applicable when --> the packet matches with more than one filter rules --> All the filter rules result in 'allow'ing the packet Higher value of 'filter priority' implies a higher priority. Usage of 'L2FilterPriority' is implementation dependant." DEFVAL { 1 } ::= { snMspsConfigL2FilterEntry 2 } snMspsConfigL2FilterEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with the default value, frames are not matched for the value in the Type/Len field with the value set for this object." DEFVAL { 0 } ::= { snMspsConfigL2FilterEntry 3 } snMspsConfigL2FilterProtocolType OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump | msdos | mumps | netbios | vines-echo | vines-ip | xns-idp: A non-IP protocol. A value of '0' means, the filter is applicable for all protocols." DEFVAL { 0 } ::= { snMspsConfigL2FilterEntry 4 } snMspsConfigL2FilterDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Address ." ::= { snMspsConfigL2FilterEntry 5 } snMspsConfigL2FilterSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address" ::= { snMspsConfigL2FilterEntry 6 } snMspsConfigL2FilterVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring this value is not allowed." DEFVAL { 0 } ::= { snMspsConfigL2FilterEntry 7 } snMspsConfigL2FilterInPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is applicable for the incoming packets on all ports. Even though the snMspsConfigL2FilterInPortList is configured, It is applicable only if snMspsConfigL2FilterDirection is configured as 'in'. By default inport list is maintained as '0'." ::= { snMspsConfigL2FilterEntry 8 } snMspsConfigL2FilterAction OBJECT-TYPE SYNTAX INTEGER { allow (1), drop (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded." DEFVAL { allow } ::= { snMspsConfigL2FilterEntry 9 } snMspsConfigL2FilterMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this filter is matched." ::= { snMspsConfigL2FilterEntry 10 } snMspsConfigL2FilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { snMspsConfigL2FilterEntry 11 } snMspsConfigL2FilterOutPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is applicable for the outgoing packets on all ports. Even though the snMspsConfigL2FilterOutPortList is configured, It is applicable only if snMspsConfigL2FilterDirection is configured as 'out'. By default outport list is maintained as '0'." ::= { snMspsConfigL2FilterEntry 12 } snMspsConfigL2FilterDirection OBJECT-TYPE SYNTAX INTEGER { in (1), out (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on specified ports of the snMspsConfigL2FilterInPortList. When the direction of this filter is 'out', It is applied on specified ports of the snMspsConfigL2FilterOutPortList." DEFVAL { in } ::= { snMspsConfigL2FilterEntry 13 } -- Layer 4 Switching snMspsConfigL4SwitchingFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigL4SwitchingFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table to L4 Switching rules in the system. " ::= { snMspsConfigNetwork 2 } snMspsConfigL4SwitchingFilterEntry OBJECT-TYPE SYNTAX SnMspsConfigL4SwitchingFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry in this table is a L4 Switching rule. Index to the table is L4 filter number. " INDEX { snMspsConfigL4SwitchingFilterNo} ::= { snMspsConfigL4SwitchingFilterTable 1 } SnMspsConfigL4SwitchingFilterEntry ::= SEQUENCE { snMspsConfigL4SwitchingFilterNo Integer32, snMspsConfigL4SwitchingProtocol Integer32, snMspsConfigL4SwitchingPortNo Unsigned32, snMspsConfigL4SwitchingCopyToPort Integer32, snMspsConfigL4SwitchingFilterStatus RowStatus } snMspsConfigL4SwitchingFilterNo OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "L4 Switching Filter rule number." ::= { snMspsConfigL4SwitchingFilterEntry 1 } snMspsConfigL4SwitchingProtocol OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it will not be checked to decide the action. " DEFVAL { 255 } ::= { snMspsConfigL4SwitchingFilterEntry 2 } snMspsConfigL4SwitchingPortNo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Layer 4 port no. Please note these ports are the TCP / UDP ports." DEFVAL { 0 } ::= { snMspsConfigL4SwitchingFilterEntry 3 } snMspsConfigL4SwitchingCopyToPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is Port to which the packet would be switched" ::= { snMspsConfigL4SwitchingFilterEntry 4 } snMspsConfigL4SwitchingFilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { snMspsConfigL4SwitchingFilterEntry 5 } -- ------------------------------------------------------------------ -- IP Authorized Manager snMspsConfigIpAuthMgrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigIpAuthMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure IP authorized managers in the system." ::= { snMspsConfigNetwork 3 } snMspsConfigIpAuthMgrEntry OBJECT-TYPE SYNTAX SnMspsConfigIpAuthMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rules for particular IP authorized manager." INDEX { snMspsConfigIpAuthMgrIpAddr, snMspsConfigIpAuthMgrIpMask } ::= { snMspsConfigIpAuthMgrTable 1 } SnMspsConfigIpAuthMgrEntry ::= SEQUENCE { snMspsConfigIpAuthMgrIpAddr IpAddress, snMspsConfigIpAuthMgrIpMask IpAddress, snMspsConfigIpAuthMgrPortList PortList, snMspsConfigIpAuthMgrVlanList OCTET STRING, snMspsConfigIpAuthMgrOOBPort TruthValue, snMspsConfigIpAuthMgrAllowedServices Integer32, snMspsConfigIpAuthMgrRowStatus RowStatus, snMspsConfigIpAuthMgrCreationOrder Integer32 } snMspsConfigIpAuthMgrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'." ::= { snMspsConfigIpAuthMgrEntry 1 } snMspsConfigIpAuthMgrIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the IP address mask to be applied on snMspsConfigIpAuthMgrIpAddr. Value 0.0.0.0 indicates mask for 'Any Manager'." ::= { snMspsConfigIpAuthMgrEntry 2 } snMspsConfigIpAuthMgrPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports." ::= { snMspsConfigIpAuthMgrEntry 3 } snMspsConfigIpAuthMgrVlanList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured in the 'VlanList', the manager can reside only in the configured vlan set. Access to the switch will be denied from any other vlan." ::= { snMspsConfigIpAuthMgrEntry 4 } snMspsConfigIpAuthMgrOOBPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface" DEFVAL { false } ::= { snMspsConfigIpAuthMgrEntry 5 } snMspsConfigIpAuthMgrAllowedServices OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each bit position is as given below: With bit 0 being the Least Significant Bit, Bit0 --> snmp Bit1 --> telnet Bit2 --> http Bit3 --> https Bit4 --> ssh If the particular bit is set to 1,corresponding service is allowed for the configured manager. By default all services are allowed for the configured manager." DEFVAL { '1F'h } ::= { snMspsConfigIpAuthMgrEntry 6 } snMspsConfigIpAuthMgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { snMspsConfigIpAuthMgrEntry 7 } snMspsConfigIpAuthMgrCreationOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies creation order of the rules" ::= { snMspsConfigIpAuthMgrEntry 8 } snMspsConfigIpAuthMgrEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Ip Authorized Manager." DEFVAL {disabled} ::= { snMspsConfigNetwork 4 } snMspsConfigResetTopologyChgCounter OBJECT-TYPE SYNTAX INTEGER { no-operation(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset topology change counters for RSTP and MSTP depending on the stack running." ::= { snMspsConfigNetwork 5 } -- snMspsConfigNetwork 6-9 reserved for future extensions -- ------------------------------------------------------------------ -- Ipvx Authorized Manager snMspsConfigIpvxAuthMgrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigIpvxAuthMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure Ipvx(ipv4 and ipv6) authorized managers in the system." ::= { snMspsConfigNetwork 10 } snMspsConfigIpvxAuthMgrEntry OBJECT-TYPE SYNTAX SnMspsConfigIpvxAuthMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ipvx Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rules for particular Ipvx authorized manager." INDEX { snMspsConfigIpvxAuthMgrAddrType, snMspsConfigIpvxAuthMgrAddr, snMspsConfigIpvxAuthMgrAddrLen } ::= { snMspsConfigIpvxAuthMgrTable 1 } SnMspsConfigIpvxAuthMgrEntry ::= SEQUENCE { snMspsConfigIpvxAuthMgrAddrType InetAddressType, snMspsConfigIpvxAuthMgrAddr InetAddress, snMspsConfigIpvxAuthMgrAddrLen InetAddressPrefixLength, snMspsConfigIpvxAuthMgrPortList PortList, snMspsConfigIpvxAuthMgrVlanList OCTET STRING, snMspsConfigIpvxAuthMgrOOBPort TruthValue, snMspsConfigIpvxAuthMgrAllowedServices Integer32, snMspsConfigIpvxAuthMgrCreationOrder Integer32, snMspsConfigIpvxAuthMgrRowStatus RowStatus } snMspsConfigIpvxAuthMgrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of SnMspsConfigIpvxAuthMgrEntry. This value determines the type for snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen. ipv4(1) and ipv6(2) are the only two values supported in this MIB module." ::= { snMspsConfigIpvxAuthMgrEntry 1 } snMspsConfigIpvxAuthMgrAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 or :: indicates 'Any Manager'." ::= { snMspsConfigIpvxAuthMgrEntry 2 } snMspsConfigIpvxAuthMgrAddrLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the number of leading one bits that form the mask to be logical-ANDed with the snMspsConfigIpvxAuthMgrAddr before being compared to the value in the snMspsConfigIpvxAuthMgrAddr field. The values for the index objects snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen must be consistent. Value 0 indicates mask for 'Any Manager'." ::= { snMspsConfigIpvxAuthMgrEntry 3 } snMspsConfigIpvxAuthMgrPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports." ::= { snMspsConfigIpvxAuthMgrEntry 4 } snMspsConfigIpvxAuthMgrVlanList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured in the 'VlanList', the manager can reside only in the configured vlan set. Access to the switch will be denied from any other vlan." ::= { snMspsConfigIpvxAuthMgrEntry 5 } snMspsConfigIpvxAuthMgrOOBPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface" DEFVAL { false } ::= { snMspsConfigIpvxAuthMgrEntry 6 } snMspsConfigIpvxAuthMgrAllowedServices OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each bit position is as given below: With bit 0 being the Least Significant Bit, Bit0 --> snmp Bit1 --> telnet Bit2 --> http Bit3 --> https Bit4 --> ssh If the particular bit is set to 1,corresponding service is allowed for the configured manager. By default all services are allowed for the configured manager." DEFVAL { '1F'h } ::= { snMspsConfigIpvxAuthMgrEntry 7 } snMspsConfigIpvxAuthMgrCreationOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies creation order of the rules" ::= { snMspsConfigIpvxAuthMgrEntry 8 } snMspsConfigIpvxAuthMgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { snMspsConfigIpvxAuthMgrEntry 9 } -- ------------------------------------------------------------------ snMspsConfigIpVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Inband ports VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned for the agent." DEFVAL {0} ::= { snMspsConfig 8 } snMspsConfigAgentReceiveOnAllKnownVLANs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connections on all the VLANs. For outgoing traffic like sending SNMP traps and connection to the e-mail server the Agent VLAN is used." ::= { snMspsConfig 9 } snMspsConfigVlan0Aware OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of VLAN which is to be in transparent mode. Zero (0) indicates that no VLAN is in transparent mode." DEFVAL {0} ::= { snMspsConfig 10} --snMspsConfig 11 reserved for future extensions -- Port Control Configuration Table snMspsConfigPortCtrlConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigPortCtrlConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control the port specific parameters of the device like speed, duplex mode, etc." ::= { snMspsConfig 12 } snMspsConfigPortCtrlConfigurationEntry OBJECT-TYPE SYNTAX SnMspsConfigPortCtrlConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each interface in the system. Index to the table is the interface index of the port." INDEX { snMspsConfigPortCtrlConfigurationIndex } ::= { snMspsConfigPortCtrlConfigurationTable 1 } SnMspsConfigPortCtrlConfigurationEntry ::= SEQUENCE { snMspsConfigPortCtrlConfigurationIndex Integer32, snMspsConfigPortCtrlConfigurationMode INTEGER, snMspsConfigPortCtrlConfigurationDuplex INTEGER, snMspsConfigPortCtrlConfigurationSpeed INTEGER, snMspsConfigPortCtrlConfigurationFlowControl INTEGER, snMspsConfigPortCtrlConfigurationRenegotiate INTEGER, snMspsConfigPortCtrlConfigurationMaxMacAddr Integer32, snMspsConfigPortCtrlConfigurationMaxMacAction INTEGER, snMspsConfigPortCtrlConfigurationHOLBlockPrevention INTEGER } snMspsConfigPortCtrlConfigurationIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of the port for which the configuration in this entry applies." ::= { snMspsConfigPortCtrlConfigurationEntry 1 } snMspsConfigPortCtrlConfigurationMode OBJECT-TYPE SYNTAX INTEGER { auto (1), noNegotiation (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as 'full-duplex' or 'half-duplex' and about flow contol. If set as 'nonegotiation', the configured values for interface speed, duplex mode and flow control will be effective. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMode')." DEFVAL { auto } ::= { snMspsConfigPortCtrlConfigurationEntry 2 } snMspsConfigPortCtrlConfigurationDuplex OBJECT-TYPE SYNTAX INTEGER { full (1), half (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlDuplex')." ::= { snMspsConfigPortCtrlConfigurationEntry 3 } snMspsConfigPortCtrlConfigurationSpeed OBJECT-TYPE SYNTAX INTEGER { tenMBPS (1), hundredMBPS (2), oneGB (3), tenGB (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlSpeed')." ::= { snMspsConfigPortCtrlConfigurationEntry 4 } snMspsConfigPortCtrlConfigurationFlowControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlFlowControl')." ::= { snMspsConfigPortCtrlConfigurationEntry 5 } snMspsConfigPortCtrlConfigurationRenegotiate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlRenegotiate')." DEFVAL { false } ::= { snMspsConfigPortCtrlConfigurationEntry 6 } snMspsConfigPortCtrlConfigurationMaxMacAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of new MAC addresses that can be learnt over the interface. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAddr')." ::= { snMspsConfigPortCtrlConfigurationEntry 7 } snMspsConfigPortCtrlConfigurationMaxMacAction OBJECT-TYPE SYNTAX INTEGER { drop (1), purgeLRU (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the packet with new mac address will be dropped once the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'purgeLRU', the 'Least Recently Used' mac address will be deleted from the MAC table and the new mac address will be added. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAction')." ::= { snMspsConfigPortCtrlConfigurationEntry 8 } snMspsConfigPortCtrlConfigurationHOLBlockPrevention OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Head-Of-Line Blocking prevention on a port. The current value of this MIB object represents only configuration state. The real state of this port-specific parameter may be different ('see snMspsConfigPortHOLBlockPrevention')." DEFVAL { enabled } ::= { snMspsConfigPortCtrlConfigurationEntry 9 } --snMspsConfig 13-14 reserved for future extensions -- Rate Control Limit Group --------------------------------------------- snMspsConfigRateCtrlLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigRateCtrlLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch." ::= { snMspsConfig 15 } snMspsConfigRateCtrlLimitEntry OBJECT-TYPE SYNTAX SnMspsConfigRateCtrlLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each physical and port-channel interface in the switch." INDEX { snMspsConfigRateCtrlLimitIndex } ::= { snMspsConfigRateCtrlLimitTable 1 } SnMspsConfigRateCtrlLimitEntry ::= SEQUENCE { snMspsConfigRateCtrlLimitIndex Integer32, snMspsConfigRateCtrlLimitValue Integer32 } snMspsConfigRateCtrlLimitIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index for which the configuration in this entry applies." ::= { snMspsConfigRateCtrlLimitEntry 1 } snMspsConfigRateCtrlLimitValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to configure the limiting value for the maximum number of dlf, multicast and broadcast data that can be transmitted per second over this interface. The unit of data is given by snMspsConfigRateCtrlUnit object. Setting this object to the value zero disables rate limiting for Destination lookup failure packets on this interface. The value that can be set for this object is limited by the underlying hardware" DEFVAL {0} ::= { snMspsConfigRateCtrlLimitEntry 2 } snMspsConfigRateCtrlUnit OBJECT-TYPE SYNTAX INTEGER { pps (1), kbps (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines unit of rate limiting values in corresponding entry from snMspsConfigRateCtrlTable. It can be treated either in packet per second or kilobit per second." ::= { snMspsConfig 16 } --snMspsConfig 17-19 reserved for future extensions snMspsConfigSwitchAgingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable auto-aging functionality of the learning table." DEFVAL {enabled} ::= { snMspsConfig 20 } snMspsConfigSwitchSnifferBarrierEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Monitor Barrier functionality. If disabled the mirror destination port is also part of the switching engine " DEFVAL {enabled} ::= { snMspsConfig 25 } --snMspsConfig 21-26 reserved for future extensions snMspsConfigSwitchTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Show/Set -MM/DD/YYYY hh:mm:ss- date and time of the switch." ::= { snMspsConfig 27 } snMspsConfigurationSaveMode OBJECT-TYPE SYNTAX INTEGER { trailmode(1), autosave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'autosave(2)', all nonvolatile configuration parameters are saved automaticly to flash after configuration changes. In 'trailmode (1)' save must be triggered manually. Autosave mode may not be available on all devices. In this case, 'wrong value' error will be returned, when trying to set 'autosave(2)'" DEFVAL { trailmode } ::= { snMspsConfig 28 } snMspsInitiateConfigSave OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object reverts back to 'false'. All the configurations made via the three interfaces viz. -> commandline interface -> Web Interface -> SNMP interface are saved either in 'Startup Configuration File' in the flash or in the specified 'issConfigSaveFileName' in the flash or in the chosen remote system, depending upon 'ConfigSaveOption'." DEFVAL { false } ::= { snMspsConfig 29 } snMspsConfigLastSynchronisationTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "MM/DD/YYYY hh:mm:ss- This is the time when the system time is last synchronized. It return zero length value if the system time is not yet synchronized." ::= { snMspsConfig 30 } snMspsConfigChangesSaved OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Value 'true' means there are no configuration changes that are not saved. Otherwise it will have the value 'false'." DEFVAL { true } ::= { snMspsConfig 31 } snMspsConfigurationAutoRestartTimer OBJECT-TYPE SYNTAX INTEGER (0|300..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "When setting to time interval in seconds, device will perform restart automatically after the time interval is expired. Setting 0 will cancel any timer, which was previously set" DEFVAL { 0 } ::= { snMspsConfig 32 } snMspsEnhancedPassiveListeningCompatibility OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Enhance Passive Listening Compatibility mode on this device. If port wise configuration is supported, the port specific object must be configured for each port in order to support the feature." DEFVAL {disabled} ::= { snMspsConfig 35 } snMspsConfigVrrpAcceptPing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable ability to accept pings to associated ip addresses" DEFVAL {disabled} ::= { snMspsConfig 41} snMspsOperLoginPasswordPolicy OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supported, High - password should contain minimum 8 characters, minimum 1 upper case character, minimum 1 special character, and minimum 1 number." DEFVAL {high} ::= { snMspsConfig 60 } snMspsConfigLoginPasswordPolicy OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supported, High - password should contain minimum 8 characters, minimum 1 upper case character, minimum 1 special character, and minimum 1 number." DEFVAL {high} ::= { snMspsConfig 61 } -- ---------------------------------------------------------------- -- MSPS Objects: USERS MIB -- ---------------------------------------------------------------- snMspsLoginUsers OBJECT IDENTIFIER ::= { snMspsConfig 65 } snMspsLoginUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoginUsersTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the login usernames and privileges, which are currently created." ::= { snMspsLoginUsers 5 } snMspsLoginUsersTableEntry OBJECT-TYPE SYNTAX SnMspsLoginUsersTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "user table entry" INDEX { snMspsLoginUserName } ::= { snMspsLoginUsersTable 1 } SnMspsLoginUsersTableEntry ::= SEQUENCE { snMspsLoginUserName DisplayString, snMspsLoginUserPrivilege Integer32, snMspsLoginUserRemoteAccess Integer32 } snMspsLoginUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "User Name which is used as index of the snMspsLoginUserTable. " ::= { snMspsLoginUsersTableEntry 1 } snMspsLoginUserPrivilege OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "User Privilege" ::= { snMspsLoginUsersTableEntry 2 } snMspsLoginUserRemoteAccess OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Access Filter . Value 0 means its allowed to access." ::= { snMspsLoginUsersTableEntry 3 } -- ------------------------------------ -- Config Backup Configuration Group -- ------------------------------------ snMspsConfigBackup OBJECT IDENTIFIER ::= { snMspsConfig 100 } snMspsConfigBackupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsConfigBackupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to display and to control the configuration pack backup." ::= { snMspsConfigBackup 10 } snMspsConfigBackupEntry OBJECT-TYPE SYNTAX SnMspsConfigBackupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each configuration pack." INDEX { snMspsConfigBackupIndex } ::= { snMspsConfigBackupTable 1 } SnMspsConfigBackupEntry ::= SEQUENCE { snMspsConfigBackupIndex Integer32, snMspsConfigBackupFileName DisplayString, snMspsConfigBackupFileSize Integer32, snMspsConfigBackupOperation INTEGER, snMspsConfigBackupStatus RowStatus } snMspsConfigBackupIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary number of corresponding entry representing settings of each config backup." ::= { snMspsConfigBackupEntry 1 } snMspsConfigBackupFileName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The file name of configuration backup." ::= { snMspsConfigBackupEntry 4 } snMspsConfigBackupFileSize OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The file size in kilobytes of configuration backup." ::= { snMspsConfigBackupEntry 7 } snMspsConfigBackupOperation OBJECT-TYPE SYNTAX INTEGER { idle(0), restore(1), in-progress(2), not-enough-storage(3), error(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is a trigger and status variable. Write access using restore(1), initiates restore of corresponding backup configuration. After the operation is completed, the object will return idle(0). Write access using other values as restore(1) will cause 'bad value' error. Read access will return following values: 0 - No action in performing or last action was successfull. 2 - Last initiated action (restore or create new backup) is in progress. 3 - No enough free memory to create new configuration backup. 4 - Internal error during last action." ::= { snMspsConfigBackupEntry 50 } snMspsConfigBackupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is a control variable. It controls the instantiation of a conceptual row in snMspsConfigBackupTable. The new row cannot be activated as long as snMspsConfigBackupFileName is not set." ::= { snMspsConfigBackupEntry 100 } snMspsConfigSourceIpVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the LoopBack IP interface VLAN ID (1 to 4094). Non-Zero IPv4/IPv6 Address of this LoopBack interface will be used as Source Address for management communication. Using of Loopback IP as source IP is applicable for Syslog, SMTP, NTP, SNTP, Radius and SNMP Packets generated from this device. If snMspsConfigSourceIpVlanId is 0, then this feature is disabled. If snMspsConfigSourceIpVlanId in non-zero, and if the corresponding Loopback interface has IPv4 Address as 0.0.0.0, then this feature is disabled for all IPv4 management communication. If the loopback interface does not have an active IPv6 Global Address, then this feature is disabled for all IPv6 management communication." DEFVAL {0} ::= { snMspsConfig 101 } -- snMspsIfMainTable -- This table is used for the management of all the interfaces in the -- system. snMspsIfMainTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfMainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table can be used to monitor all the interface types. However only virtual and logical interfaces could be created via this table. Physical interfaces were created automatically during system initialization and cannot be added or removed. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the semantics of the MIB-2 ifIndex." ::= { snMspsIf 4 } snMspsIfMainEntry OBJECT-TYPE SYNTAX SnMspsIfMainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { snMspsIfMainIndex } ::= { snMspsIfMainTable 1 } SnMspsIfMainEntry ::= SEQUENCE { snMspsIfMainIndex InterfaceIndex, snMspsIfMainType INTEGER, snMspsIfMainMtu Integer32, snMspsIfMainAdminStatus INTEGER, snMspsIfMainOperStatus INTEGER, snMspsIfMainEncapType INTEGER, snMspsIfMainBrgPortType INTEGER, snMspsIfMainRowStatus RowStatus, snMspsIfMainSubType INTEGER } snMspsIfMainIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable." ::= { snMspsIfMainEntry 1 } snMspsIfMainType OBJECT-TYPE SYNTAX INTEGER { rfc877x25(5), -- X.25 ethernetCsmacd(6), -- Ethernet/802.3 iso88025TokenRing(9), -- Token Ring ppp(23), -- PPP link softwareLoopback(24), -- Loopback Interface frameRelay(32), -- Frame Relay DTE port miox25(38), -- multiprotocol over x.25 -- used for X.25 VCs aal5(49), -- AAL5 over ATM propVirtual (53), -- Proprietary Virtual Interface async(84), -- ASYNC frameRelayMPI(92), -- multiprotocol -- over FR -- used for FR VCs -- and sub-interfaces pppMultilinkBundle(108), -- PPP Multilink -- Bundle ipOverAtm(114), -- IPoA virtual hdlc(118), -- HDLC port tunnel(131), -- Encapsulation interface atmSubInterface(134), -- VCs under IPoA l3ipvlan(136), -- Layer3 VLAN interface mplsTunnel (150), -- MPLS Tunnel Virtual Interface ieee8023ad(161), -- Link Aggregation Mib mpls (166), -- MPLS brgPort(209), -- Bridge port used for creating virtual ports in PBB ilan(247), -- Internal-lan pip (248) -- Virtual (Internal) Provider Instance port } -- These are the currently supported -- interfaces. More can be added at a -- later time. MAX-ACCESS read-create STATUS current DESCRIPTION "The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the snMspsIfMainTable and before setting any other object in this table. Once the type is specified, it cannot be changed - the interface should be deleted for changing the type of the interface. The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49), async(84) and hdlc(118) are physical interfaces while all other types are virtual or logical interfaces. Specific ifIndex ranges are reserved for different interface types. Creation of different types of interfaces is possible only within their corresponding ifIndex range. So the snMspsIfMainType should be configured corresponding to the ifIndex range reserved for that particular interface type. pip interface type will be used vritual Provider Instance port in PBB bridge mode. physical PIPs can be created using ethernetCsmacd . Following is the mapping of different port types and there snMspsIfMaintype values. External ports -------------- Port: snMspsIfMaintype Port type ------------------------------------------------------------------- CNP- Ctagged 6 - customerNetworkPortCtagged (9) CNP - Port based 6 - customerNetworkPortPortBased (2) CNP- Stagged 6 - customerNetworkPortStagged (3) PNP 6 - providerNetworkPort (1) PIP 6 - providerInstancePort (11) CBP 6 - customerBackbonePort (12) Internal ports -------------- VIP 209 - virtualInstancePort (10) PIP 248 - providerInstancePort (11) CBP 209 - customerBackbonePort (12) brgPort will be used to create virtual PBB ports other than PIPs- VIPs and CBPs. The propVirtual type denotes properietary logical interfaces. These type of interfaces can be associated with a {physical interface, switch instance} for the purpose of sharing the physical interface to more than one context and thus realising Switch Instance Sharing of a physical interface." ::= { snMspsIfMainEntry 2 } snMspsIfMainMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP is operating over the interface, then this value indicates the IP MTU over this interface. For changing the MTU of any interface, the interface must be brought down first - changing MTU while the interface is administratively up is not permitted. If not specified during interface creation, a default value is assigned based on the snMspsIfMainType given to the particular interface. While configuring for logical VLAN interfaces, care should be taken to, configure this value as the lowest of the MTU values of the member ports." ::= { snMspsIfMainEntry 3 } snMspsIfMainAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of the interface. This object can be set only when the snMspsIfMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. The testing(3) state indicates that no operational packets can be passed - this state is not currently supported. When a managed system initializes, all interfaces start with snMspsIfMainAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, snMspsIfMainAdminStatus is then changed to the up (1) state (or remains in the down(2) state)." DEFVAL { down } ::= { snMspsIfMainEntry 4 } snMspsIfMainOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3), -- in some test mode unknown(4), -- status can not be -- determined for -- some reason. dormant(5), notPresent(6), -- some component is -- missing lowerLayerDown(7) -- down due to state -- of lower-layer -- interface(s). } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported currently. If snMspsIfMainAdminStatus is down (2) then snMspsIfMainOperStatus would be down (2). If snMspsIfMainAdminStatus is changed to up (1) then snMspsIfMainOperStatus should change to up (1) if the interface is ready to transmit and receive work traffic; it should change to dormant (5) the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should change to lowerLayerDown(7) state if it cannot be made up as the interface sub-layer below it is down; it should remain in the down (2) state if and only if there is a fault that prevents it from going to the up (1) state; it should remain in the notPresent (6) state if the interface has missing (typically, hardware) components. The status unknown(4) is shown when it is not possible to determine the exact status of the interface - e.g. the interface sub-layer is performing negotiations - during this period the interface is not up but at the same time, it is not a fault condition and hence it cannot be shown as down - in such periods the status is shown as unknown. This object has the semantics of the ifOperStatus of the standard ifTable." ::= { snMspsIfMainEntry 5 } snMspsIfMainEncapType OBJECT-TYPE SYNTAX INTEGER { other(1), nlpid(2), -- NLPID based encap -- in the case of FR -- and multiplexed -- NLPID encap for X.25 nlpidSnap(3), -- NLPID-SNAP based -- encap in the case -- of FR and multiplexed -- NLPID-SNAP encap for -- X.25. cudNlpid(4), -- dedicated NLPID for -- X.25 only cudNlpidSnap(5), -- dedicated -- NLPID-SNAP for -- X.25 only llcSnap(6), -- for ATM VCs only vcMultiplexed(7), -- for ATM VCs only ethernetV2(8) -- for Ethernet interfaces } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulation is llcSnap(6). If other(1) is specified then an automatic encapsulation type learning method is used in ARP for determining the encapsulation for unicast destinations while the multicast and broadcast destinations use ethernetV2(8). For PPP and MLPPP interfaces, the encapsulation type can only be other(1) and this is the default value. For FR VCs, the value can be nlpid(2) (for carrying protocols which have NLPID) or nlpidSnap(3) (for other protocols). The default is nlpid(2) and the types of protocols supported are inferred from the stack-layering implemented over the interface. For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3) (where the VC can carry multiplexed protocol traffic with each data packet containing the NLPID or SNAP header) or cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies the NLPID of the protocol or SNAP and the data packets do not contain these headers - for dedicated VCs). The default is cudNlpid(4). For ATM VCs, the default is llcSnap(6) but the vcMultiplexed(7) encapsulation is also supported. This object is not applicable to other interfaces." ::= { snMspsIfMainEntry 6 } snMspsIfMainBrgPortType OBJECT-TYPE SYNTAX INTEGER { providerNetworkPort (1), customerNetworkPortPortBased (2), customerNetworkPortStagged (3), customerEdgePort (4), propCustomerEdgePort (5), propCustomerNetworkPort (6), propProviderNetworkPort (7), customerBridgePort (8), customerNetworkPortCtagged (9), virtualInstancePort (10), providerInstancePort (11), customerBackbonePort (12) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Bridge port type of this specified switch port. Bridge Port type can be specified only for switch ports and not for router ports, IVR interfaces and I-LAN Interfaces. providerNetworkPort - Port Connected to a single Provider. SVLAN Classification is based on only the PVID configured for the port for untagged packets. customerNetworkPortPortBased - Port in the S-VLAN component that can transmit or received frames for single customer. All packets received on this port, are mapped to one single service instance identified by the PVID of that Port. Acceptable Port Type will be always Admit only Untagged or Priority Tagged Frames on this port. customerNetworkPortStagged - Port in the S-VLAN component that can transmit or received frames for single customer. VLAN classification on this interface will be based on the S-tag received or on the PVID of the port. Ingress Filtering will be always enabled on this port. customerEdgePort - Port in a Provider Edge Bridge connected to a single customer. Multiple services can be provide on this port. The Packets received on this interface will be first classified to a CVLAN. CVLAN classification can be based on the Vid in the C-Tag present in the packet (if it C-tagged packet) or from the pvid of the port. Service instance selection (S-VLAN selection) for a frame is done based on the entry present in the C-VID registration table for the pair (C-VID, reception Port). CustomerEdgePort configuration is allowed only in Provider Edge Bridges. propCustomerEdgePort - Port connected to a single customer, where multiple services can be provided based on only Proprietary SVLAN classification tables. S-VLAN classification will not happen based on C-VID registration table on this port. propCustomerEdgePort configuration is allowed only in Provider Edge Bridges. propCustomerNetworkPort - Port connected to a single customer, where multiple service can be provided based on CVLANs by assigning one of the Proprietary SVLAN classification tables to this port. The services can also be assigned using other proprietary SVLAN classification tables where CVLAN is not the index of the table. propProviderNetworkPort - Port connected to a Q-in-Q Bridge located inside Provider Network. This port is part of S-VLAN component. If packets to be tagged and sent out of this port will have 0x8100 as the ether type. Similarly pakcets with standard Q tag (ether type as 0x8100) received will be considered as S-Tagged packets. customerBridgePort - Type of the port to be used in customer bridges as well in Provider(Q-in-Q) bridges. This type is not valid in Provider Core bridges as well as Provider Edge bridge. customerNetworkPortCtagged - Port in the I component that can transmit or received frames for single customer. VLAN classification on this interface will be based on the C-tag received or on the default CVID of the port. Ingress Filtering will be always enabled on this port. virtualInstancePort - A Bridge Port on an I-component in a Backbone Edge Bridge that provides access to a single backbone service instance. providerInstancePort - The set of Virtual Instance Ports that are supported by a single instance of the device. customerBackbonePort - A Backbone Edge Bridge Port that can receive and transmit I-tagged frames for multiple customers, and assign B-VIDs and translate I-SID on the basis of the received I-SID. In Customer bridges and in Provider Bridges only customerPort option is allowed. In Provider backbone bridge only customerNetworkPort, providerNetworkPort and customerBackbonePort type of ports are allowed. Bridge Port Type cannot be set for a port-channel port, if some physical ports are aggregated in it. Also Bridge Port type cannot be set for a port, if part of a port-channel. Whenever the Bridge port type changes, the previous configuration associated with the port will be flushed. For example. whenever CNP(STagged) and PNP port types are changed to any other port type, - The unicast entries learnt on this port and - The VID translation table entries associated with the port will be flushed. Whenever CEP port type is changed to any other port type, - The unicast entries learnt on this port - The C-VID registration table entries associated with the port - The PEP configuration table entries - The service priority regeneration table entries will be flushed. Even the vlan membership of the port will be removed when the Pbport type is changed." DEFVAL { 8 } ::= { snMspsIfMainEntry 7 } snMspsIfMainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "A RowStatus variable for addition (except for physical interfaces), deletion (except for physical interfaces ) and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status is active, the interface is created and ready to use in the respective protocol modules. When the status is notInService, the interface has not been registered with the respective protocol modules and as such those modules are not aware of the existence of the interface - creation is hence, incomplete. Setting an active interface to notInService results in de-registration/deletion of the interface from the respective protocol modules and all the configurations associated with that interface in those modules may be lost. Deletion of an interface, may affect the status of other interfaces which are layered above or below it in the Interface Stack (ifStackTable) and may result in other interfaces being made notReady or notInService." ::= { snMspsIfMainEntry 8 } snMspsIfMainSubType OBJECT-TYPE SYNTAX INTEGER { extremeEther(251), fastEther(252), gigabitEthernet(253) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object stores the subType value of the specified interface. Configuration of this object is not mandatory.By default Sub type value will be updated based on the hardware link speed." ::= { snMspsIfMainEntry 9 } -- snMspsIfIpTable -- This table is used for the management of the interfaces in the -- system which are registered with IP. snMspsIfIpTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the network interfaces in the system. This table is a extension to the snMspsIfMainTable. The index to this table has the semantics of the snMspsIfMainIndex of the snMspsIfMainTable. Entries are created automatically in this table for any interface sub-layer which is layer below IP using the ifStackTable. Similarly, entries are deleted from this table when the interface's layering below IP is removed." ::= { snMspsIf 5 } snMspsIfIpEntry OBJECT-TYPE SYNTAX SnMspsIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface over which IP is operating." INDEX { snMspsIfMainIndex } ::= { snMspsIfIpTable 1 } SnMspsIfIpEntry ::= SEQUENCE { snMspsIfIpAddrAllocMethod INTEGER, snMspsIfIpAddr IpAddress, snMspsIfIpSubnetMask IpAddress, snMspsIfIpBroadcastAddr IpAddress, snMspsIfIpForwardingEnable TruthValue, snMspsIfIpAddrAllocProtocol INTEGER, snMspsIfIpInterfaceName DisplayString } snMspsIfIpAddrAllocMethod OBJECT-TYPE SYNTAX INTEGER { manual(1), -- To be set by Manager negotiation(2), -- obtained from peer dynamic(3), none(4) -- none of the above } -- Currently only -- these method possible. MAX-ACCESS read-write STATUS current DESCRIPTION "The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obtaining of IP addresses through negotiation. The dynamic(3) option takes an IP address dynamically from the available server (dhcp/bootp/rarp) according to the protocol specified in snMspsIfIpAddrAllocProtocol. If the method specified is manual and the IP address is not provided (then the interface would be treated as a un-numbered interface." DEFVAL { none } ::= { snMspsIfIpEntry 1 } snMspsIfIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PPP link - not under MP, MP interface and X.25 VC). If the interface is not a network interface then the default value of 0.0.0.0 is assigned and the interface is treated as a un-numbered interface by IP." DEFVAL { '00000000'H } ::= { snMspsIfIpEntry 2 } snMspsIfIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface." ::= { snMspsIfIpEntry 3 } snMspsIfIpBroadcastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accepted. If not specified, this object takes the default value based on the class of the IP address configured for the interface." ::= { snMspsIfIpEntry 4 } snMspsIfIpForwardingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that interface being dropped and ICMP error messages being generated for the packets." DEFVAL { true } ::= { snMspsIfIpEntry 5 } snMspsIfIpAddrAllocProtocol OBJECT-TYPE SYNTAX INTEGER { rarp(1), dhcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when snMspsIfIpAddrAllocMethod is set to dynamic (3). Currently rarp (1) option is not supported. The assigned value will be effective only when the interface admin status changes" DEFVAL { dhcp } ::= { snMspsIfIpEntry 6 } snMspsIfIpInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Interface name for IP interfaces" ::= { snMspsIfIpEntry 7 } -- snMspsIfIvrTable -- This table is used for the Inter VLAN Routing related -- configurations for each interface such as converting Bridged interfaces -- to Routed interfaces and vice-versa. snMspsIfIvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfIvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all the interfaces in the system with IVR related configurations. This table is an extension to the snMspsIfMainTable. The index to this table has the semantics of the snMspsIfMainIndex of the snMspsIfMainTable." ::= { snMspsIf 8 } snMspsIfIvrEntry OBJECT-TYPE SYNTAX SnMspsIfIvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing IVR-related information applicable to a interface." INDEX { snMspsIfMainIndex } ::= { snMspsIfIvrTable 1 } SnMspsIfIvrEntry ::= SEQUENCE { snMspsIfIvrBridgedIface TruthValue, snMspsIfIvrLoopBackIface TruthValue } snMspsIfIvrBridgedIface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing bridging of packets through this interface. A value of 'FALSE' indicates that this interface is a Routed interface and is capable of performing routing of packets through this interface." ::= { snMspsIfIvrEntry 1 } snMspsIfIvrLoopBackIface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if this interface is a IVR Loopback interface or not. A value of 'TRUE' indicates that this IVR interface is a Loopback Interface. A value of 'FALSE' indicates that this IVR interface is not a Loopback interface." DEFVAL { false } ::= { snMspsIfIvrEntry 2 } -- snMspsIfSecondaryIpAddressTable -- This table is to configure secondary ip address over the interfaces -- registered with IP. snMspsIfSecondaryIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfSecondaryIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the snMspsIfMainTable. The index to this table has the semantics of the snMspsIfMainIndex of the snMspsIfMainTable. Secondary IpAddress configuration should not override the primary ip address configured for any of the interface Updation of entries in this table are not allowd when RowStatus is active" ::= { snMspsIf 11 } snMspsIfSecondaryIpAddressEntry OBJECT-TYPE SYNTAX SnMspsIfSecondaryIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains the information associated with the secondary(additional) ip address configured to a particular interface." INDEX { snMspsIfMainIndex , snMspsIfSecondaryIpAddress} ::= { snMspsIfSecondaryIpAddressTable 1 } SnMspsIfSecondaryIpAddressEntry ::= SEQUENCE { snMspsIfSecondaryIpAddress IpAddress, snMspsIfSecondaryIpSubnetMask IpAddress, snMspsIfSecondaryIpBroadcastAddr IpAddress, snMspsIfSecondaryIpRowStatus RowStatus, snMspsIfSecondaryIpInterfaceName DisplayString } snMspsIfSecondaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Secondary IP address associated with the interface" ::= {snMspsIfSecondaryIpAddressEntry 1 } snMspsIfSecondaryIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface." ::= { snMspsIfSecondaryIpAddressEntry 2 } snMspsIfSecondaryIpBroadcastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accepted. If not specified, this object takes the default value based on the class of the IP address configured for the interface." ::= { snMspsIfSecondaryIpAddressEntry 3 } snMspsIfSecondaryIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to manage creation and deletion of rows in this table." ::= { snMspsIfSecondaryIpAddressEntry 4 } snMspsIfSecondaryIpInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Interface name for secondary IP interfaces" ::= { snMspsIfSecondaryIpAddressEntry 5 } -- snMspsIfOverviewIpAddressTable -- This table is to display primary and secondary ip addresses over the interfaces -- registered with IP. snMspsIfOverviewIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfOverviewIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of primary and secondary IP addresses configured over the interfaces registered with IP." ::= { snMspsIf 15 } snMspsIfOverviewIpAddressEntry OBJECT-TYPE SYNTAX SnMspsIfOverviewIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains the information associated with the primary and secondary(additional) ip addresses configured to a particular interface." INDEX { snMspsIfMainIndex , snMspsIfOverviewIpAddress} ::= { snMspsIfOverviewIpAddressTable 1 } SnMspsIfOverviewIpAddressEntry ::= SEQUENCE { snMspsIfOverviewIpAddress IpAddress, snMspsIfOverviewIpSubnetMask IpAddress, snMspsIfOverviewIpBroadcastAddr IpAddress, snMspsIfOverviewIpType INTEGER, snMspsIfOverviewIpAddressACDStatus INTEGER } snMspsIfOverviewIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Shows primary and secondary IP addresses associated with the interface" ::= {snMspsIfOverviewIpAddressEntry 1 } snMspsIfOverviewIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the IP Subnet Mask associted with the primary and secondary ip addresses configuration." ::= { snMspsIfOverviewIpAddressEntry 2 } snMspsIfOverviewIpBroadcastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the IP broadcast address associated with the configured primary and secondary IP addresses." ::= { snMspsIfOverviewIpAddressEntry 3 } snMspsIfOverviewIpType OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows IP address type: primary or secondary." DEFVAL { secondary } ::= { snMspsIfOverviewIpAddressEntry 4 } snMspsIfOverviewIpAddressACDStatus OBJECT-TYPE SYNTAX INTEGER { acdStatusIdle(0), acdStatusStarting(1), acdStatusConflict(2), acdStatusDefending(3), acdStatusActive(4), acdStatusNotSupported(5), acdStatusDisabled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows IPV4 Address Collision Detection Status." ::= { snMspsIfOverviewIpAddressEntry 5 } -- snMspsIfIvrMappingTable -- Mapping of multiple Vlans to IVR interfaces. snMspsIfIvrMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIfIvrMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface. Only considered if device supports corresponding functionality, otherwise any set operation will fail with an inconsistentValue error and get will return empty." ::= { snMspsIf 18 } snMspsIfIvrMappingEntry OBJECT-TYPE SYNTAX SnMspsIfIvrMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table gives an assoicated vlan to an IVR interface." INDEX { snMspsIfMainIndex, snMspsIfIvrAssociatedVlan } ::= { snMspsIfIvrMappingTable 1 } SnMspsIfIvrMappingEntry ::= SEQUENCE { snMspsIfIvrAssociatedVlan VlanId, snMspsIfIvrMappingRowStatus RowStatus } snMspsIfIvrAssociatedVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies one of the associated VLANs for a given IVR interface. Vlan Id associated with an IVR interface during IVR interface creation, should not be configured as snMspsIfIvrAssociatedVlan for that IVR interface. snMspsIfIvrAssociatedVlan and the primary vlan (vlan associated with IVR during IVR creation) for an IVR interface should be in the same Layer 2 context." ::= { snMspsIfIvrMappingEntry 1 } snMspsIfIvrMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes the Row Status for port isolation table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' values are not allowed. Example: To add vlans 2, 3 as associated vlans to an IVR interface with interface index as 10 in this table, the following sequence to be followed: 1. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the entry with index (snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 2) 2. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the entry with index (snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3) To delete vlan 3 from the list of associated vlans for an IVR interface with IfIndex = 10 ports, do the following: Set the snMspsIfIvrMappingRowStatus as 'destroy' for the entry with index (snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3)." ::= { snMspsIfIvrMappingEntry 2 } -- -------------------------------------------------------------- -- SIMATIC NET MSPS SPECIFIC PORT MIB -- -------------------------------------------------------------- -- -------------------------------------------------------------- -- PortTable Sub-Group -- -------------------------------------------------------------- snMspsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port objects in the form of private extensions of interface objects." ::= { snMspsPort 90 } snMspsPortEntry OBJECT-TYPE SYNTAX SnMspsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { snMspsPortIndex } ::= { snMspsPortTable 1 } SnMspsPortEntry ::= SEQUENCE { snMspsPortIndex INTEGER, snMspsPortFaultMaskState INTEGER, snMspsPortLockState INTEGER, snMspsPortFlowControlStatus TruthValue, snMspsPortStandbyMaskState INTEGER, snMspsPortBroadcastBlocking INTEGER, snMspsPortDcpConfig INTEGER, snMspsPortUnknownMulticastBlocking INTEGER, snMspsPortActive TruthValue, snMspsPortUnknownUnicastBlocking INTEGER, snMspsPortMediaType INTEGER, snMspsPortEnhPassListComp INTEGER, snMspsPortQoSTrustMode INTEGER, snMspsPortBlockState INTEGER, snMspsPortRouterAdvertisementBlocking INTEGER, snMspsPortAdminMacLearningStatus TruthValue, snMspsPortMacLearningFlush INTEGER } snMspsPortIndex OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique number for each interface. The number is in the range 1 to 26. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { snMspsPortEntry 1 } snMspsPortFaultMaskState OBJECT-TYPE SYNTAX INTEGER { checked-link-down(1), notChecked(2), checked-link-up(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mask for checking link state of the port. If a link of a masked as link down (checked-link-down) port is down then a fault will be generated. If a link of a masked as link up (checked-link-up) port is up then a fault will be generated." DEFVAL {notChecked} ::= { snMspsPortEntry 2 } snMspsPortLockState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lock state of the port. disabled (1) - MAC Learning and Forwarding enabled. Dynamic entries can be added. enabled (2) - MAC Learning and Forwarding disabled. Dynamic entries alter to static." DEFVAL {disabled} ::= { snMspsPortEntry 3 } snMspsPortFlowControlStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of Flow Control on the port returned from the hardware" ::= { snMspsPortEntry 4 } snMspsPortStandbyMaskState OBJECT-TYPE SYNTAX INTEGER { checked(1), notChecked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mask for standby ports." ::= { snMspsPortEntry 6 } snMspsPortBroadcastBlocking OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable broadcast blocking. Used to select which ports are prevented from being forwarded broadcast packets." ::= { snMspsPortEntry 7 } snMspsPortDcpConfig OBJECT-TYPE SYNTAX INTEGER { rxOnly(2), txAndRx(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively desired behavior of the device for DCP frames. If the associated snMspsPortDcpConfig object has a value of 'rxOnly(2)', then the device will receive, but it will not transmit DCP frames on this port. If the associated snMspsPortDcpConfig object has a value of 'txAndRx(3)', then the device will transmit and receive DCP frames on this port." ::= { snMspsPortEntry 8 } snMspsPortUnknownMulticastBlocking OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable unknown multicast blocking. Used to select which ports are prevented from being forwarded multicast packets to unknown multicast addresses." ::= { snMspsPortEntry 9 } snMspsPortActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to false(2) forces link down on this ports and its connected devices." ::= { snMspsPortEntry 10 } snMspsPortUnknownUnicastBlocking OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable unknown unicast blocking. Used to select which ports are prevented from being forwarded unicast packets to unknown unicast addresses." ::= { snMspsPortEntry 11 } snMspsPortMediaType OBJECT-TYPE SYNTAX INTEGER { not-available(0), auto(1), copper(2), optical(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the currently active media type of the combo port. Write access is only allowed for combo ports, i.e. ports that consist of both a copper port and an optical port. not-available(0) - the port is not a combo port; configuration of media type is not possible auto (1) - the media type that has a connection is used; if both ports are connected, the optical port is preferred copper (2) - the copper port is used optical (3) - the optical port is used" ::= { snMspsPortEntry 12 } snMspsPortEnhPassListComp OBJECT-TYPE SYNTAX INTEGER { not-available(0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Enhanced Passive listening Compatibility mode on a specific port. The global object snMspsEnhancedPassiveListeningCompatibility must be configured accordingly to activate this configuration. If the functionality is not available on corresponding device, not-available(0) will be returned and no other value can be set." DEFVAL {disabled} ::= { snMspsPortEntry 13 } snMspsPortQoSTrustMode OBJECT-TYPE SYNTAX INTEGER { not-available(0), untrust(1), trustcos(2), trustdscp(3), trustcos-dscp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " not-available (0) - the port qos trust mode is not supported untrust (1) - packet qos parameters are assigned as per port default priority settings trust-cos (2) - if the packet is tagged the qos parameters are assigned according to User Priority field, else like untrust trust-dscp (3) - if the packet is IPv4/IPv6 qoS parameters are assigned to the Dscp field or remapped Dscp, else like untrust trust-cos-dscp (4) - if the packet is IPv4/IPv6 the packet is assigned like trustdscp else if the packet is tagged like trustcos else like untrust" ::= { snMspsPortEntry 14 } snMspsPortBlockState OBJECT-TYPE SYNTAX INTEGER { not-available (0), forwarding (1), ring-redundancy (2), spanning-tree (3), loop-detected (4), down-in-bundle (5), la-loop-detected (6), la-spanning-tree (7), link-down (8), admin-down (9), power-down (10), standby (11), link-check (12), mrp-interconnection (13) } MAX-ACCESS read-only STATUS current DESCRIPTION " not-available (0) - the port block state analysis is not supported forwarding (1) - not blocked by any configuration or protocol ring-redundancy (2) - blocked as per ring-redundancy state assigned spanning-tree (3) - blocked as per spanning-tree state assigned loop-detected (4) - blocked as per loop-detection state assigned down-in-bundle (5) - blocked as member of an aggregation la-loop-detected (6) - blocked as per loop-detection state of LA la-spanning-tree (7) - blocked as per spanning-tree state of LA link-down (8) - blocked as per operative link state admin-down (9) - blocked as per configured admin state power-down (10) - blocked as per configured power state standby (11) - blocked as per standby state assigned link-check (12) - blocked as per link-check state assigned mrp-interconnection (13) - blocked as per mrp-interconnection state assigned" ::= { snMspsPortEntry 15 } snMspsPortRouterAdvertisementBlocking OBJECT-TYPE SYNTAX INTEGER { not-available (0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " not-available (0) - Ipv6 Router Advertisements blocking not supported enabled (1) - Ipv6 Router Advertisements blocking enabled disabled (2) - Ipv6 Router Advertisements blocking disabled" ::= { snMspsPortEntry 20 } snMspsPortAdminMacLearningStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Truth value used to configure the unicast MAC learning Admin status for the port. Value true (1), allows the unicast MAC learning on the port. Value false(2), disables the unicast MAC learning on the port. Status can not be set to false (2), if the device does not support this feature" DEFVAL { true } ::= { snMspsPortEntry 25 } snMspsPortMacLearningFlush OBJECT-TYPE SYNTAX INTEGER { not-available(0), disabled (1), port-flush (2), full-flush (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " not-available (0) - This feature is not supported. disabled (1) - On link down, learnt MAC will not be flushed port-flush (2) - On link down, learnt MAC will be flushed only on this port full-flush (3) - On link down, learnt MAC will be flushed for the entire switch" ::= { snMspsPortEntry 30 } snMspsTrapMSTPNewRootbridgeDetected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "(M)STP new Rootbridge detected." ::= 251 snMspsTrapMSTPTopChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "(M)STP Topologychange detected." ::= 252 snMspsTrapPnacPortAuthStateChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Pnac port auth state change notification." ::= 451 snMspsTrapRmActiveState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Redundancy manager entered active state." ::= 1451 snMspsTrapRmPassiveState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Redundancy manager entered passive state." ::= 1452 snMspsTrapStandbyActiveState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Standby manager entered active state." ::= 1501 snMspsTrapStandbyPassiveState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Standby manager entered passive state." ::= 1502 snMspsTrapWlanGeneric TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "A generic WLAN event occured." ::= 1751 snMspsTrapWlanNewOverlapAp TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "New Overlap-AP found" ::= 1752 snMspsTrapWlanOverlapApAgedOut TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Overlap-AP aged out" ::= 1753 snMspsTrapWlanWdsUp TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "WDS interface is up" ::= 1754 snMspsTrapWlanWdsDown TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "WDS interface is down" ::= 1755 snMspsTrapWlanRadarDetected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "DFS radar interference event occured" ::= 1756 snMspsTrapWlanRadarAgedOut TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "DFS channel aged out" ::= 1757 snMspsTrapWlanRadiusAccessAccepted TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "RADIUS: access from a client accepted" ::= 1758 snMspsTrapWlanRadiusAccessRejected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "RADIUS: access request from a client rejected" ::= 1759 snMspsTrapWlanAuthToAPFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: Authentication on AP failed" ::= 1761 snMspsTrapWlanAssociatedToAP TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: successfully associated to AP" ::= 1763 snMspsTrapWlanAssociationToAPFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: Association failed" ::= 1764 snMspsTrapWlanDisassociatedFromAP TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: disassociated from AP" ::= 1765 snMspsTrapWlanDisassociationFromAPFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: Disassotiation failed" ::= 1766 snMspsTrapWlanAuthenticationFromClientFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "AP: Client authentication failed" ::= 1767 snMspsTrapWlanClientDeauthenticated TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: deauthenticated from AP" ::= 1768 snMspsTrapWlanClientAuthenticated TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: authenticated to AP" ::= 1769 snMspsTrapWlanClientAssociated TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: associated to AP" ::= 1770 snMspsTrapWlanAssociationFromClientFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "AP: Client association failed" ::= 1771 snMspsTrapWlanClientDisassociated TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Client: disassociated from AP" ::= 1772 snMspsTrapWlanDisassociationFromClientFailed TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "AP: Client disassociation failed" ::= 1773 snMspsTrapWlanForcedRoaming TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Forced Roaming event occured" ::= 1774 snMspsTrapWlanIPCFMaxSta TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "iPCF: number of wireless clients too big for the cycle time" ::= 1781 snMspsTrapWlanIPCFMaxCycleTime TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "iPCF: Max. PROFINET cycle time exceeded" ::= 1782 snMspsTrapWlanIPCFMaxCyclicPollSize TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Max. size of PROFINET cyclic poll exceeded (too many PROFINET devices)" ::= 1783 snMspsTrapPowerLine1Down TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power down on line L1." ::= 1851 snMspsTrapPowerLine1Up TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power up on line L1." ::= 1852 snMspsTrapPowerLine2Down TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power down on line L2." ::= 1853 snMspsTrapPowerLine2Up TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power up on line L2." ::= 1854 snMspsTrapChangedFaultState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Device changed fault state." ::= 1855 snMspsTrapPoEDown TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power down on line 3 (PoE)." ::= 1856 snMspsTrapPoEUp TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Power up on line L3 (PoE)." ::= 1857 snMspsTrapEnvData TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "The device entered an considerable temperature / usage value. Variable Bindigs: Message what happened" ::= 1860 snMspsTrapServiceInformation TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Service Information occured. Variable Bindigs: Message what happened" ::= 1861 snMspsTrapCLIScriptFileStatus TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Shows the CLI Script File status that is load at startup via DHCP" ::= 1862 snMspsTrapConfigurationChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Informs user when configuration is changed" ::= 1863 snMspsTrapNTPInvalidConfiguration TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Invalid NTP Configuration." ::= 2101 snMspsTrapNTPWrongPacketLength TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Received NTP Packet with wrong length." ::= 2102 snMspsTrapNTPWrongSourceAddress TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Received NTP Packet from wrong Source Address." ::= 2103 snMspsTrapNTPWrongKeyId TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Received NTP Packet with wrong or missing Key Id." ::= 2104 snMspsTrapNTPAddAuthFail TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Secure NTP failed to add authentication." ::= 2105 snMspsTrapNTPVerifyAuthFail TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Received NTP Packet failed authentication." ::= 2106 snMspsTrapNTPKeyUpdate TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "SecureNTP Keys were updated." ::= 2107 snMspsTrapVRRPStateChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Device changed vrrp master state." ::= 2201 snMspsTrapLOOPDStateChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Device changed LOOPD state." ::= 2251 snMspsTrapOSPFStateChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Device changed OSPF route state." ::= 2301 snMspsTrapMNMobileConnectionSuccess TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Mobile connection successfull." ::= 2351 snMspsTrapMNMobileConnectionFailure TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Mobile connection failed." ::= 2352 snMspsTrapMNMobileConnectionLost TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Mobile connection lost." ::= 2353 snTrapMspsLinkCheckBrokenLinkDetected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Link Check disabled port because of broken link." ::= 2901 snTrapMspsLinkCheckPortEnabled TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "By Link Check disabled port is enabled again." ::= 2902 snTrapMspsLinkCheckMultiplePartners TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Link Check detected multiple partners on port." ::= 2903 snTrapMspsLinkCheckMultiplePartnersReset TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Link Check partner detection reset on port." ::= 2904 snTrapMspsLinkCheckCriticalLinkDetected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Link Check indicates critical link state on port." ::= 2905 snTrapMspsLinkCheckCriticalLinkReset TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "By Link Check indicated critical link state reset on port." ::= 2906 snTrapMspsLinkCheckUnapprovedConfigDetected TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Unapproved Link Check configuration. Disable Link Check on this port." ::= 2907 snTrapMspsLinkCheckUnapprovedConfigResolved TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Unapproved Link Check configuration resolved on this port." ::= 2908 snMspsTrapMrpInterconMgrOpenState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "MRP Interconnection state change to open." ::= 3001 snMspsTrapMrpInterconMgrClosedState TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "MRP Interconnection state change to closed." ::= 3002 snMspsTrapPoeStateChange TRAP-TYPE ENTERPRISE snMsps DESCRIPTION "Poe state change notification." ::= 3051 -- -------------------------------------------------------------- -- SIMATIC NET MSPS SPECIFIC SFP MIB -- -------------------------------------------------------------- -- -------------------------------------------------------------- -- SfpTable Sub-Group -- -------------------------------------------------------------- snMspsSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port objects in the form of private extensions of interface objects." ::= { snMspsSfp 10 } snMspsSfpEntry OBJECT-TYPE SYNTAX SnMspsSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { snMspsSfpIndex } ::= { snMspsSfpTable 1 } SnMspsSfpEntry ::= SEQUENCE { snMspsSfpIndex INTEGER, snMspsSfpStatus TruthValue, snMspsSfpName DisplayString, snMspsSfpModel DisplayString, snMspsSfpRevision DisplayString, snMspsSfpSerial DisplayString, snMspsSfpNominalBitrate INTEGER, snMspsSfpMaxLinkLength50 INTEGER, snMspsSfpMaxLinkLength62 INTEGER, snMspsSfpTemperature INTEGER, snMspsSfpTemperatureMin INTEGER, snMspsSfpTemperatureMax INTEGER, snMspsSfpVoltage INTEGER, snMspsSfpVoltageMin INTEGER, snMspsSfpVoltageMax INTEGER, snMspsSfpCurrent INTEGER, snMspsSfpCurrentMin INTEGER, snMspsSfpCurrentMax INTEGER, snMspsSfpRxPower INTEGER, snMspsSfpRxPowerMin INTEGER, snMspsSfpRxPowerMax INTEGER, snMspsSfpTxPower INTEGER, snMspsSfpTxPowerMin INTEGER, snMspsSfpTxPowerMax INTEGER, snMspsSfpRxPowerdBm INTEGER, snMspsSfpRxPowerMindBm INTEGER, snMspsSfpRxPowerMaxdBm INTEGER, snMspsSfpTxPowerdBm INTEGER, snMspsSfpTxPowerMindBm INTEGER, snMspsSfpTxPowerMaxdBm INTEGER } snMspsSfpIndex OBJECT-TYPE SYNTAX INTEGER (1..52) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique number for each interface. The number is in the range 1 to 52. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { snMspsSfpEntry 1 } snMspsSfpStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a SFP device in currently plugged in on this interface" ::= { snMspsSfpEntry 2 } snMspsSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the SFP device" ::= { snMspsSfpEntry 3 } snMspsSfpModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The model of the SFP device" ::= { snMspsSfpEntry 4 } snMspsSfpRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number of the SFP device" ::= { snMspsSfpEntry 5 } snMspsSfpSerial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the SFP device" ::= { snMspsSfpEntry 6 } snMspsSfpNominalBitrate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The nominal bitrate [MBit/s] of the SFP device" ::= { snMspsSfpEntry 7 } snMspsSfpMaxLinkLength50 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum link length(50/125um) of the SFP device" ::= { snMspsSfpEntry 8 } snMspsSfpMaxLinkLength62 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum link length(62/125um) of the SFP device" ::= { snMspsSfpEntry 9 } snMspsSfpTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the SFP device" ::= { snMspsSfpEntry 10 } snMspsSfpTemperatureMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported temperature of the SFP device" ::= { snMspsSfpEntry 11 } snMspsSfpTemperatureMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported temperature of the SFP device" ::= { snMspsSfpEntry 12 } snMspsSfpVoltage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage of the SFP device" ::= { snMspsSfpEntry 13 } snMspsSfpVoltageMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported voltage of the SFP device" ::= { snMspsSfpEntry 14 } snMspsSfpVoltageMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported voltage of the SFP device" ::= { snMspsSfpEntry 15 } snMspsSfpCurrent OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The bias current of the SFP device" ::= { snMspsSfpEntry 16 } snMspsSfpCurrentMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported bias current of the SFP device" ::= { snMspsSfpEntry 17 } snMspsSfpCurrentMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported bias current of the SFP device" ::= { snMspsSfpEntry 18 } snMspsSfpRxPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 19 } snMspsSfpRxPowerMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 20 } snMspsSfpRxPowerMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 21 } snMspsSfpTxPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 22 } snMspsSfpTxPowerMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 23 } snMspsSfpTxPowerMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 uW" ::= { snMspsSfpEntry 24 } snMspsSfpRxPowerdBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 32 } snMspsSfpRxPowerMindBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 33 } snMspsSfpRxPowerMaxdBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 34 } snMspsSfpTxPowerdBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 35 } snMspsSfpTxPowerMindBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 36 } snMspsSfpTxPowerMaxdBm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW" ::= { snMspsSfpEntry 37 } -- ---------------------------------------------------------------- -- MSPS Load& Save Global Objects -- ---------------------------------------------------------------- snMspsLoadSaveRestartRequired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents current state of the device according to file transfer activities, which are done for files registered by Load & Save component. If the current state is 'true', the restart of the device is required." DEFVAL { false } ::= { snMspsLoadSave 1 } -- ---------------------------------------------------------------- -- MSPS Load & Save Group Objects -- ---------------------------------------------------------------- snMspsLoadSavePasswords OBJECT IDENTIFIER ::= { snMspsLoadSave 5 } snMspsLoadSaveTftp OBJECT IDENTIFIER ::= { snMspsLoadSave 10 } snMspsLoadSaveSftp OBJECT IDENTIFIER ::= { snMspsLoadSave 11 } -- ---------------------------------------------------------------- -- MSPS Load& Save Component Objects (Passwords) -- ---------------------------------------------------------------- snMspsLoadSaveFilePasswordTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoadSaveFilePasswordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains files, which are currently registered by Load & Save component." ::= { snMspsLoadSavePasswords 10 } snMspsLoadSaveFilePasswordEntry OBJECT-TYPE SYNTAX SnMspsLoadSaveFilePasswordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the snMspsLoadSaveFilePasswordTable representing password settings of configuration files, which are currently registered by Load & Save component." INDEX { snMspsLoadSaveFileIndex } ::= { snMspsLoadSaveFilePasswordTable 1 } SnMspsLoadSaveFilePasswordEntry ::= SEQUENCE { snMspsLoadSaveFileIndex OCTET STRING, snMspsLoadSaveFileType DisplayString, snMspsLoadSaveFileEnablePassword TruthValue, snMspsLoadSaveFilePassword OCTET STRING, snMspsLoadSaveFilePasswordStatus INTEGER } snMspsLoadSaveFileIndex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique string representing file type ID." ::= { snMspsLoadSaveFilePasswordEntry 1 } snMspsLoadSaveFileType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The file type ID of registered file. This string is identical to snMspsLoadSaveFileIndex." ::= { snMspsLoadSaveFilePasswordEntry 2 } snMspsLoadSaveFileEnablePassword OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set 'true' if this file type needs a configured password." DEFVAL { false } ::= { snMspsLoadSaveFilePasswordEntry 5 } snMspsLoadSaveFilePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The encrypted password value, which is used when accessing registered file. This value has to be entered by user." ::= { snMspsLoadSaveFilePasswordEntry 10 } snMspsLoadSaveFilePasswordStatus OBJECT-TYPE SYNTAX INTEGER { not-required(0), valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current validation status of entered password. 0 - The password value is not considered by the file type 1 - The password value stored in snMspsLoadSaveFilePassword is valid for the corresponding file type. 2 - The password value stored in snMspsLoadSaveFilePassword is invalid for the corresponding file type." ::= { snMspsLoadSaveFilePasswordEntry 15 } -- ---------------------------------------------------------------- -- MSPS Load& Save Component Objects (TFTP) -- ---------------------------------------------------------------- snMspsLoadSaveTftpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The IP address of TFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveTftp 1 } snMspsLoadSaveTftpServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of TFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveTftp 2 } snMspsLoadSaveTftpServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address of TFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveTftp 5 } snMspsLoadSaveTftpServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of TFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveTftp 6 } snMspsLoadSaveTftpFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configuration files, which are currently registered by Load & Save component." ::= { snMspsLoadSaveTftp 10 } snMspsLoadSaveTftpFileEntry OBJECT-TYPE SYNTAX SnMspsLoadSaveTftpFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the snMspsLoadSaveTftpFileTable representing settings of configuration files, which are currently registered by Load & Save component." INDEX { snMspsLoadSaveTftpFileIndex } ::= { snMspsLoadSaveTftpFileTable 1 } SnMspsLoadSaveTftpFileEntry ::= SEQUENCE { snMspsLoadSaveTftpFileIndex OCTET STRING, snMspsLoadSaveTftpFileType DisplayString, snMspsLoadSaveTftpFileName DisplayString, snMspsLoadSaveTftpFilePresent INTEGER, snMspsLoadSaveTftpFileLoadSupported TruthValue, snMspsLoadSaveTftpFileSaveSupported TruthValue, snMspsLoadSaveTftpFileDeleteSupported TruthValue } snMspsLoadSaveTftpFileIndex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique string representing file type ID." ::= { snMspsLoadSaveTftpFileEntry 1 } snMspsLoadSaveTftpFileType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The file type ID of registered file. This string is identical to snMspsLoadSaveTftpFileIndex." ::= { snMspsLoadSaveTftpFileEntry 2 } snMspsLoadSaveTftpFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The file name of registered file. The file name can also contain the relative path starting from root folder of TFTP server." ::= { snMspsLoadSaveTftpFileEntry 3 } snMspsLoadSaveTftpFilePresent OBJECT-TYPE SYNTAX INTEGER { not-present(0), presentSave(1), presentDelete(2), presentSaveDelete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from device 2 - the registered file can be deleted on the device 3 - the registered file can be downloaded from device and deleted on device " ::= { snMspsLoadSaveTftpFileEntry 4 } snMspsLoadSaveTftpFileLoadSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Load functionality is supported for this file type." ::= { snMspsLoadSaveTftpFileEntry 10 } snMspsLoadSaveTftpFileSaveSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Save functionality is supported for this file type." ::= { snMspsLoadSaveTftpFileEntry 11 } snMspsLoadSaveTftpFileDeleteSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Delete functionality is supported for this file type." ::= { snMspsLoadSaveTftpFileEntry 12 } -- ---------------------------------------- -- TFTP File triggers table -- ---------------------------------------- snMspsLoadSaveTftpFileTransferTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This conceptual table is an extension of snMspsLoadSaveTftpFileTable and contains file triggers for initiate file operations with files registered by Load & Save component." ::= { snMspsLoadSaveTftp 11 } snMspsLoadSaveTftpFileTransferEntry OBJECT-TYPE SYNTAX SnMspsLoadSaveTftpFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the snMspsLoadSaveTftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component." AUGMENTS { snMspsLoadSaveTftpFileEntry } ::= { snMspsLoadSaveTftpFileTransferTable 1 } SnMspsLoadSaveTftpFileTransferEntry ::= SEQUENCE { snMspsLoadSaveTftpFileLoad INTEGER, snMspsLoadSaveTftpFileSave INTEGER, snMspsLoadSaveTftpFileDelete INTEGER } snMspsLoadSaveTftpFileLoad OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), loadError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates transfer of registered file from TFTP server to device, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveTftpFileLoadSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Load transfers have been done for this file type since last start of the device. 2 - Activate transfer of registered file from TFTP server to device. If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Last transfer of registered file from TFTP server is in progress. 4 - Last transfer of registered file from TFTP server was successfull. Device restart is not reqired. 5 - Last transfer of registered file from TFTP server was successfull. Device restart is reqired. 6 - Last transfer of registered file from TFTP server was not successfull." ::= { snMspsLoadSaveTftpFileTransferEntry 1 } snMspsLoadSaveTftpFileSave OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), saveError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates transfer of registered file from device to TFTP server, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveTftpFileSaveSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Save transfers have been done for this file type since last start of the device. 2 - Activate transfer of registered file from device to TFTP server. If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Last transfer of registered file from device is in progress. 4 - Last transfer of registered file from device was successfull. Device restart is not reqired. 5 - Last transfer of registered file from device was successfull. Device restart is reqired. 6 - Last transfer of registered file from device was not successfull." ::= { snMspsLoadSaveTftpFileTransferEntry 2 } snMspsLoadSaveTftpFileDelete OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), deleteError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates deletion of registered file on TFTP server, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveTftpFileDeleteSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Delete actions have been done for this file type since device start. 2 - Activate deletion of registered file on TFTP server If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Deletion of registered file on TFTP server is in progress. 4 - Last deletion of registered file on TFTP server was successfull. Restart of the device is not reqired. 5 - Last deletion of registered file on TFTP server was successfull. Restart of the device is reqired. 6 - Last deletion of registered file on TFTP server was not successfull." ::= { snMspsLoadSaveTftpFileTransferEntry 3 } -- ---------------------------------------------------------------- -- MSPS Load& Save Component Objects (SFTP) -- ---------------------------------------------------------------- snMspsLoadSaveSftpServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of SFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveSftp 1 } snMspsLoadSaveSftpServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of SFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveSftp 2 } snMspsLoadSaveSftpServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of SFTP server, which stores the files registered by Load&Save component." ::= { snMspsLoadSaveSftp 3 } snMspsLoadSaveSftpServerUser OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The user ID, which has to be allowed for login to SFTP server." ::= { snMspsLoadSaveSftp 6 } snMspsLoadSaveSftpServerPassword OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The user password, which has to be valid for login with user ID defined in snMspsLoadSaveSftpServerUser to SFTP server." ::= { snMspsLoadSaveSftp 7 } snMspsLoadSaveSftpFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configuration files, which are currently registered by Load & Save component." ::= { snMspsLoadSaveSftp 10 } snMspsLoadSaveSftpFileEntry OBJECT-TYPE SYNTAX SnMspsLoadSaveSftpFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the snMspsLoadSaveSftpFileTable representing settings of configuration files, which are currently registered by Load & Save component." INDEX { snMspsLoadSaveSftpFileIndex } ::= { snMspsLoadSaveSftpFileTable 1 } SnMspsLoadSaveSftpFileEntry ::= SEQUENCE { snMspsLoadSaveSftpFileIndex OCTET STRING, snMspsLoadSaveSftpFileType DisplayString, snMspsLoadSaveSftpFileName DisplayString, snMspsLoadSaveSftpFilePresent INTEGER, snMspsLoadSaveSftpFileLoadSupported TruthValue, snMspsLoadSaveSftpFileSaveSupported TruthValue, snMspsLoadSaveSftpFileDeleteSupported TruthValue } snMspsLoadSaveSftpFileIndex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique string representing file type ID." ::= { snMspsLoadSaveSftpFileEntry 1 } snMspsLoadSaveSftpFileType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The file type ID of registered file. This string is identical to snMspsLoadSaveSftpFileIndex." ::= { snMspsLoadSaveSftpFileEntry 2 } snMspsLoadSaveSftpFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The file name of registered file. The file name can also contain the relative path starting from root folder of SFTP server." ::= { snMspsLoadSaveSftpFileEntry 3 } snMspsLoadSaveSftpFilePresent OBJECT-TYPE SYNTAX INTEGER { not-present(0), presentSave(1), presentDelete(2), presentSaveDelete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from device 2 - the registered file can be deleted on the device 3 - the registered file can be downloaded from device and deleted on device " ::= { snMspsLoadSaveSftpFileEntry 4 } snMspsLoadSaveSftpFileLoadSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Load functionality is supported for this file type." ::= { snMspsLoadSaveSftpFileEntry 10 } snMspsLoadSaveSftpFileSaveSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Save functionality is supported for this file type." ::= { snMspsLoadSaveSftpFileEntry 11 } snMspsLoadSaveSftpFileDeleteSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents whether the Delete functionality is supported for this file type." ::= { snMspsLoadSaveSftpFileEntry 12 } -- ---------------------------------------- -- SFTP File triggers table -- ---------------------------------------- snMspsLoadSaveSftpFileTransferTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This conceptual table is an extension of snMspsLoadSaveSftpFileTable and contains file triggers for initiate file operations with files registered by Load & Save component." ::= { snMspsLoadSaveSftp 11 } snMspsLoadSaveSftpFileTransferEntry OBJECT-TYPE SYNTAX SnMspsLoadSaveSftpFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the snMspsLoadSaveSftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component." AUGMENTS { snMspsLoadSaveSftpFileEntry } ::= { snMspsLoadSaveSftpFileTransferTable 1 } SnMspsLoadSaveSftpFileTransferEntry ::= SEQUENCE { snMspsLoadSaveSftpFileLoad INTEGER, snMspsLoadSaveSftpFileSave INTEGER, snMspsLoadSaveSftpFileDelete INTEGER } snMspsLoadSaveSftpFileLoad OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), loadError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates transfer of registered file from SFTP server to device, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveSftpFileLoadSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Load transfers have been done for this file type since last start of the device. 2 - Activate transfer of registered file from SFTP server to device. If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Last transfer of registered file from SFTP server is in progress. 4 - Last transfer of registered file from SFTP server was successfull. Device restart is not reqired. 5 - Last transfer of registered file from SFTP server was successfull. Device restart is reqired. 6 - Last transfer of registered file from SFTP server was not successfull." ::= { snMspsLoadSaveSftpFileTransferEntry 1 } snMspsLoadSaveSftpFileSave OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), saveError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates transfer of registered file from device to SFTP server, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveSftpFileSaveSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Save transfers have been done for this file type since last start of the device. 2 - Activate transfer of registered file from device to SFTP server. If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Last transfer of registered file from device is in progress. 4 - Last transfer of registered file from device was successfull. Device restart is not reqired. 5 - Last transfer of registered file from device was successfull. Device restart is reqired. 6 - Last transfer of registered file from device was not successfull." ::= { snMspsLoadSaveSftpFileTransferEntry 2 } snMspsLoadSaveSftpFileDelete OBJECT-TYPE SYNTAX INTEGER { initial(1), activate(2), in-progress(3), successNoRestart(4), successRestartRequired(5), deleteError(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using activate(2) initiates deletion of registered file on SFTP server, if this functionality is supported for this file type. The support of functionality is represented in snMspsLoadSaveSftpFileDeleteSupported. Write access using other values will cause 'bad value' error. Read access will return following values: 1 - No Delete actions have been done for this file type since device start. 2 - Activate deletion of registered file on SFTP server If this file type does not support this functionality, the 'bad value' error will be returned. 3 - Deletion of registered file on SFTP server is in progress. 4 - Last deletion of registered file on SFTP server was successfull. Restart of the device is not reqired. 5 - Last deletion of registered file on SFTP server was successfull. Restart of the device is reqired. 6 - Last deletion of registered file on SFTP server was not successfull." ::= { snMspsLoadSaveSftpFileTransferEntry 3 } snMspsHttpRedirectionStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the HTTP redirection" DEFVAL { 1 } ::= { snMspsHttp 1 } snMspsHttpToHttpsRedirectionStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the HTTP to HTTPS redirection. If device do not support this feature, the value of this MIB object can not be set to true." DEFVAL { false } ::= { snMspsHttp 2 } -- snMspsHttp 3 reserved snMspsHttpRedirectionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsHttpRedirectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the Redirection related objects" ::= { snMspsHttp 4 } snMspsHttpRedirectionEntry OBJECT-TYPE SYNTAX SnMspsHttpRedirectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsHttpRedirectionTable." INDEX { snMspsHttpRedirectionURL } ::= { snMspsHttpRedirectionTable 1 } SnMspsHttpRedirectionEntry ::= SEQUENCE { snMspsHttpRedirectionURL DisplayString, snMspsHttpRedirectedSrvAddrType InetAddressType, snMspsHttpRedirectedSrvIP InetAddress, snMspsHttpRedirectedSrvDomainName DisplayString, snMspsHttpRedirectionEntryStatus RowStatus } snMspsHttpRedirectionURL OBJECT-TYPE SYNTAX DisplayString (SIZE (100)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The URL which has to be redirected" ::= { snMspsHttpRedirectionEntry 1 } snMspsHttpRedirectedSrvAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Address type of HTTP server to which URL has to be redirected" ::= { snMspsHttpRedirectionEntry 2 } snMspsHttpRedirectedSrvIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The IP address of the HTTP Server to which redirect has to be done interface belongs to" ::= { snMspsHttpRedirectionEntry 3 } snMspsHttpRedirectedSrvDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The domain name of the HTTP server to which the URL has to be has to redirected" ::= { snMspsHttpRedirectionEntry 4 } snMspsHttpRedirectionEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of HTTP redirection table entry" ::= { snMspsHttpRedirectionEntry 5 } -- snMspsHttp 6 reserved snMspsWBMTimeOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Time out for the Web-Based-Management in seconds. Range 60s to 3600s. If value is 0, timeout is disabled." DEFVAL {900} ::= { snMspsHttp 7 } -- snMspsHttp 8-9 reserved snMspsHttpPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port to be used by the hosts/PC to configure the device using the Web Interface The HTTP server must be disabled before this configuration is done" DEFVAL { 80 } ::= { snMspsHttp 10 } snMspsHttpStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling HTTP in the system." ::= { snMspsHttp 11 } -- snMspsHttp 12-14 reserved snMspsHttpSslSecureHttpMinTlsVersion OBJECT-TYPE SYNTAX INTEGER { tlsv10 (769), tlsv11 (770), tlsv12(771) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object holds the configuration of the minimum Tls Version for secure HTTP in the system." DEFVAL { tlsv11 } ::= { snMspsHttp 15} snMspsHttpSslSecureHttpStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling secure HTTP in the system." DEFVAL { disable } ::= { snMspsHttp 16 } snMspsHttpSslPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is to configure the SSL port." DEFVAL { 443 } ::= { snMspsHttp 17 } snMspsHttpSshStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling ssh in the system." DEFVAL { true } ::= { snMspsHttp 18} -- ---------------------------------------------------------------- -- SN-MSPS-RR-MIB Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: SN-MSPS-RR-MIB -- ---------------------------------------------------------------- snMspsRingRedundancyMode OBJECT-TYPE SYNTAX INTEGER { ringRedundancyOff(1), ringRedundancyHrpOn(2), ringRedundancyMrpOn(3), ringRedundancyArd(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redundancy Mode: ringRedundancyOff(1) - no redundancy ringRedundancyHrpOn(2) - high speed redundancy protocol ringRedundancyMrpOn(3) - media redundancy protocol ringRedundancyArd(4) - automatic redundancy detection." ::= { snMspsRingRedundancy 1 } snMspsHrpRmMode OBJECT-TYPE SYNTAX INTEGER { rmOff(1), rmOn(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "HRP RM mode." ::= { snMspsRingRedundancy 2 } snMspsRmState OBJECT-TYPE SYNTAX INTEGER { rmPassive(1), rmActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RM State." ::= { snMspsRingRedundancy 3 } snMspsRmStateChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of changes to RM active state." ::= { snMspsRingRedundancy 4 } snMspsStaticPort OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "Portnumber of static port (HRP) or RingPort 2 (MRP)." ::= { snMspsRingRedundancy 5 } snMspsIsolatedPort OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "Portnumber of isolated port (HRP) or RingPort 1 (MRP)." ::= { snMspsRingRedundancy 6 } snMspsTestMaxDelay OBJECT-TYPE SYNTAX INTEGER (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Measured maximum delay of RM test telegrams." ::= { snMspsRingRedundancy 7 } snMspsRmResetCounters OBJECT-TYPE SYNTAX INTEGER { no-operation(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all counters of Redundancy protocol software. At the moment only supported for HRP." ::= { snMspsRingRedundancy 8 } snMspsMrpRmMode OBJECT-TYPE SYNTAX INTEGER { rmOff(1), rmOn(2), rmNormOn(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "MRP RM mode. rmOff(1) - ring client rmOn(2) - ring manager (MRP AUTO manager if ringRedundancyMrpOn) rmNormOn(3) - ring norm manager (MRP NORM manager if ringRedundancyMrpOn)" ::= { snMspsRingRedundancy 9 } snMspsRingRedundancyOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), hrpClient(2), hrpManager(3), mrpClient(4), mrpManager(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ring Redundancy Oper State: disabled(1) - no redundancy hrpClient(2) - high speed redundancy protocol client hrpManager(3) - high speed redundancy protocol manager mrpClient(4) - media redundancy protocol client mrpManager(5) - media redundancy protocol manager." ::= { snMspsRingRedundancy 10 } snMspsHrpRedundancyLostFaultLED OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the Fault LED when Ring Redundancy (only HRP) is lost (Redundancy Manager or Standby)." DEFVAL {2} ::= { snMspsRingRedundancy 11 } snMspsMrpDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..240)) MAX-ACCESS read-only STATUS current DESCRIPTION "Media redundancy protocol domain name." ::= { snMspsRingRedundancy 16 } snMspsTrapRmActiveState NOTIFICATION-TYPE STATUS current DESCRIPTION "Redundancy manager entered active state." ::= { snMspsTrapPrefix 1451 } snMspsTrapRmPassiveState NOTIFICATION-TYPE STATUS current DESCRIPTION "Redundancy manager entered passive state." ::= { snMspsTrapPrefix 1452 } snMspsStandbyMode OBJECT-TYPE SYNTAX INTEGER { standbyOn(1), standbyOff(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Standby connection mode." ::= { snMspsRingRedundancyStandby 1 } snMspsStandbyConnectionName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The standby connection name (Max 32 Symbol)." ::= { snMspsRingRedundancyStandby 3 } snMspsStandbyState OBJECT-TYPE SYNTAX INTEGER { standbyMasterPassive(1), standbySlavePassive(3), standbyMasterActive(5), standbySlaveActive(7), standbyMasterPassive-lost(17), standbySlavePassive-lost(19), standbyMasterActive-lost(21), standbySlaveActive-lost(23), standbyWaitingForPartner(257), standbyDisabled(300) } MAX-ACCESS read-only STATUS current DESCRIPTION "Standby connection state. Bit 0 is always 1, bit 1 is Master/Slave, bit 2 is Active/Passive and bit 8 is Partner not found or not. standbyMasterPassive(1) - Master in passive state standbySlavePassive(3) - Slave in passive state standbyMasterActive(5) - Master in active state standbySlaveActive(7) - Slave in passive state standbyMasterPassive-lost(17) - Master in passive state but partner is lost standbySlavePassive-lost(19) - Slave in passive state but partner is lost standbyMasterActive-lost(21) - Master in active state but partner is lost standbySlaveActive-lost(23) - Slave in active state but partner is lost standbyWaitingForPartner(257) - Waiting for partner, partner was not yet found standbyDisabled(300) - Standby connection is disabled" ::= { snMspsRingRedundancyStandby 4 } snMspsStandbyStateChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of changes to Standby connection active state." ::= { snMspsRingRedundancyStandby 5 } snMspsStandbyResetCounters OBJECT-TYPE SYNTAX INTEGER { no-operation(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all counters of Standby protocol software." ::= { snMspsRingRedundancyStandby 6 } snMspsStandbyForceToMaster OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Force this device to Standby master." ::= { snMspsRingRedundancyStandby 7 } snMspsStandbyStartDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Time in [ms] that a standby master/slave will wait before to enable its standby ports even if no standby partner has been contacted yet. If set to zero (default) master/slave do not enable any standby port until being connected with the partner standby slave/master" ::= { snMspsRingRedundancyStandby 12 } snMspsStandbyBackoff OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "controls Standby device backoff mechanisms." ::= { snMspsRingRedundancyStandby 14 } snMspsTrapStandbyActiveState NOTIFICATION-TYPE STATUS current DESCRIPTION "Standby manager entered active state." ::= { snMspsTrapPrefix 1501 } snMspsTrapStandbyPassiveState NOTIFICATION-TYPE STATUS current DESCRIPTION "Standby manager entered passive state." ::= { snMspsTrapPrefix 1502 } -- ---------------------------------------------------------------- -- MSPS REDUNDANCY EXT Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: SN-MSPS-RR-EXT-MIB -- ---------------------------------------------------------------- snMspsPassiveListeningEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable Passive Listening Functionality. On enabled the device reacts on receiving a TCN (Topology Change Notifications) even (and only) if (R)STP is disabled." DEFVAL {disabled} ::= { snMspsRedundancyExt 1 } snMspsPassiveListeningBpduVlanFwd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable Forwarding of BPDU in VLAN member ports when Passive Listening Functionality is enabled. On enabled the device forwards the BPDU only on the VLAN member ports. On disabled the device forwards on all the available ports in the system. " DEFVAL {enabled} ::= { snMspsRedundancyExt 2 } snMspsRmObserverMode OBJECT-TYPE SYNTAX INTEGER { disabled(2), restart(3), protect(4), not-supported(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "RM Observer Mode." ::= { snMspsRingRedundancyObserver 1 } snMspsRmObserverState OBJECT-TYPE SYNTAX INTEGER { rmObserverPassive(1), rmObserverActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RM Observer State." ::= { snMspsRingRedundancyObserver 2 } snMspsLinkCheckPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLinkCheckPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port objects." ::= { snMspsLinkCheck 10 } snMspsLinkCheckPortEntry OBJECT-TYPE SYNTAX SnMspsLinkCheckPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Check per-port entry." INDEX { snMspsLinkCheckPortIndex } ::= { snMspsLinkCheckPortTable 1 } SnMspsLinkCheckPortEntry ::= SEQUENCE { snMspsLinkCheckPortIndex InterfaceIndex, snMspsLinkCheckPortAdminState INTEGER, snMspsLinkCheckPortOperState INTEGER, snMspsLinkCheckPortMode INTEGER, snMspsLinkCheckPortAdvState INTEGER, snMspsLinkCheckPortAdvReset INTEGER, snMspsLinkCheckPortFramesIn Counter32, snMspsLinkCheckPortFramesOut Counter32 } snMspsLinkCheckPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port number of Link Check port." ::= { snMspsLinkCheckPortEntry 1 } snMspsLinkCheckPortAdminState OBJECT-TYPE SYNTAX INTEGER { auto(1), force-on(2), force-off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link Check state to be used" DEFVAL {3} ::= { snMspsLinkCheckPortEntry 2 } snMspsLinkCheckPortOperState OBJECT-TYPE SYNTAX INTEGER { active(1), not-active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Link Check operating state" DEFVAL {2} ::= { snMspsLinkCheckPortEntry 3 } snMspsLinkCheckPortMode OBJECT-TYPE SYNTAX INTEGER { standard(1), advanced(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In advanced mode the port will be disabled after Link Check breakdown" DEFVAL {1} ::= { snMspsLinkCheckPortEntry 6 } snMspsLinkCheckPortAdvState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), running(3), fault(4), critical(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port state in advanced mode" ::= { snMspsLinkCheckPortEntry 9 } snMspsLinkCheckPortAdvReset OBJECT-TYPE SYNTAX INTEGER { no-action(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "resetting a port that has been disabled after Link Check advanced mode breakdown detection" DEFVAL {1} ::= { snMspsLinkCheckPortEntry 12 } snMspsLinkCheckPortFramesIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of received Link Check frames" ::= { snMspsLinkCheckPortEntry 15 } snMspsLinkCheckPortFramesOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of sent Link Check frames" ::= { snMspsLinkCheckPortEntry 18 } snMspsLinkCheckFrameLossStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLinkCheckFrameLossStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port, per-instance objects." ::= { snMspsLinkCheck 7 } snMspsLinkCheckFrameLossStatsEntry OBJECT-TYPE SYNTAX SnMspsLinkCheckFrameLossStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Check frame loss statistic per-port, per-instance entry." INDEX { snMspsLinkCheckPortIndex, snMspsFrameLossStatsInstance } ::= { snMspsLinkCheckFrameLossStatsTable 1 } SnMspsLinkCheckFrameLossStatsEntry ::= SEQUENCE { snMspsFrameLossStatsInstance INTEGER, snMspsFrameLossStatsRating INTEGER, snMspsFrameLossStatsInterval INTEGER, snMspsFrameLossStatsThreshold INTEGER, snMspsFrameLossStatsCurrentRate INTEGER } snMspsFrameLossStatsInstance OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Check frame loss statistics instance of port." ::= { snMspsLinkCheckFrameLossStatsEntry 2 } snMspsFrameLossStatsRating OBJECT-TYPE SYNTAX INTEGER { none(1), critical(2), broken(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Rating of link state if threshold is exceeded." ::= { snMspsLinkCheckFrameLossStatsEntry 5 } snMspsFrameLossStatsInterval OBJECT-TYPE SYNTAX INTEGER (100..1000000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval [ms] of frame loss calculation." ::= { snMspsLinkCheckFrameLossStatsEntry 8 } snMspsFrameLossStatsThreshold OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Frame loss rate threshold [per mill]." ::= { snMspsLinkCheckFrameLossStatsEntry 11 } snMspsFrameLossStatsCurrentRate OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Current frame loss rate [per mill]." ::= { snMspsLinkCheckFrameLossStatsEntry 14 } snMspsLinkCheckPacketErrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLinkCheckPacketErrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port, per-type objects." ::= { snMspsLinkCheck 9 } snMspsLinkCheckPacketErrStatsEntry OBJECT-TYPE SYNTAX SnMspsLinkCheckPacketErrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet errors statistic per-type entry" INDEX { snMspsLinkCheckPortIndex, snMspsPacketErrStatsType } ::= { snMspsLinkCheckPacketErrStatsTable 1 } SnMspsLinkCheckPacketErrStatsEntry ::= SEQUENCE { snMspsPacketErrStatsType INTEGER, snMspsPacketErrStatsRating INTEGER, snMspsPacketErrStatsThreshold Counter32, snMspsPacketErrStatsIncrease Counter32 } snMspsPacketErrStatsType OBJECT-TYPE SYNTAX INTEGER { crc(1), undersize(2), oversize(3), fragment(4), jabber(5), collision(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet error type." ::= { snMspsLinkCheckPacketErrStatsEntry 3 } snMspsPacketErrStatsRating OBJECT-TYPE SYNTAX INTEGER { none(1), critical(2), broken(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Rating of link state if threshold is exceeded." ::= { snMspsLinkCheckPacketErrStatsEntry 6 } snMspsPacketErrStatsThreshold OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error increase threshold." ::= { snMspsLinkCheckPacketErrStatsEntry 9 } snMspsPacketErrStatsIncrease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error increase since Link Check state is 'running'." ::= { snMspsLinkCheckPacketErrStatsEntry 12 } -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snTrapMspsLinkCheckBrokenLinkDetected NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Link Check disabled port because of broken link." ::= { snMspsTrapPrefix 2901 } snTrapMspsLinkCheckPortEnabled NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "By Link Check disabled port is enabled again." ::= { snMspsTrapPrefix 2902 } snTrapMspsLinkCheckMultiplePartners NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Link Check detected multiple partners on port." ::= { snMspsTrapPrefix 2903 } snTrapMspsLinkCheckMultiplePartnersReset NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Link Check partner detection reset on port." ::= { snMspsTrapPrefix 2904 } snTrapMspsLinkCheckCriticalLinkDetected NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Link Check indicates critical link state on port." ::= { snMspsTrapPrefix 2905 } snTrapMspsLinkCheckCriticalLinkReset NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "By Link Check indicated critical link state reset on port." ::= { snMspsTrapPrefix 2906 } snTrapMspsLinkCheckUnapprovedConfigDetected NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Unapproved Link Check configuration. Disable Link Check on this port." ::= { snMspsTrapPrefix 2907 } snTrapMspsLinkCheckUnapprovedConfigResolved NOTIFICATION-TYPE OBJECTS { snMspsLinkCheckPortIndex } STATUS current DESCRIPTION "Unapproved Link Check configuration resolved on this port." ::= { snMspsTrapPrefix 2908 } -- *********************************************************************** -- Objects of the Media redundancy Interconnection -- *********************************************************************** snMspsMrpInterconStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "MRP Interconnection protocol status. If set to disabled(2), all configured entries of the MRP Interconnection table are set out of sevice, despite the mode and the admin role. If set to enabled(1), all configured entries are put into operation, depending on the mode and the admin role. " ::= { snMspsRingRedundancyMrpIntercon 1 } snMspsMrpInterconResetCounters OBJECT-TYPE SYNTAX INTEGER { no-operation(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all counters of MRP Interconnection protocol software. This object is not persistent. " ::= { snMspsRingRedundancyMrpIntercon 2 } snMspsMrpInterconTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMrpInterconEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every entry in this table contains information about a Media redundancy Interconnection domain. " ::= { snMspsRingRedundancyMrpIntercon 10 } snMspsMrpInterconEntry OBJECT-TYPE SYNTAX SnMspsMrpInterconEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsMrpInterconTable. " INDEX { snMspsMrpInterconIndex } ::= { snMspsMrpInterconTable 1 } SnMspsMrpInterconEntry::= SEQUENCE { snMspsMrpInterconIndex Unsigned32, snMspsMrpInterconDomainID Unsigned32, snMspsMrpInterconDomainName DisplayString, snMspsMrpInterconPort Integer32, snMspsMrpInterconPortState INTEGER, snMspsMrpInterconMode INTEGER, snMspsMrpInterconAdminRole INTEGER, snMspsMrpInterconOperRole INTEGER, snMspsMrpInterconState INTEGER, snMspsMrpInterconOpenCount Counter32, snMspsMrpInterconLastOpenChange TimeTicks, snMspsMrpInterconPeerMAC OCTET STRING, snMspsMrpInterconAdminMICPosition INTEGER, snMspsMrpInterconOperMICPosition INTEGER, snMspsMrpInterconLinkCheckProfile INTEGER, snMspsMrpInterconStartDelay INTEGER, snMspsMrpInterconRowStatus RowStatus } snMspsMrpInterconIndex OBJECT-TYPE SYNTAX Unsigned32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the entry " ::= { snMspsMrpInterconEntry 1 } snMspsMrpInterconDomainID OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "An identifier of the Media redundancy Interconnection domain which represents an Interconnection topology. A value of 0 (invalid) indicates that no ID is given yet. " ::= { snMspsMrpInterconEntry 2 } snMspsMrpInterconDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..240)) MAX-ACCESS read-write STATUS current DESCRIPTION "A logical name for the Media redundancy Interconnection domain to ease the management of Media redundancy Interconnection domains. " ::= { snMspsMrpInterconEntry 3 } snMspsMrpInterconPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex of the layer 2 interface which is used as interconnection port. A value of 0 (invalid) indicates that no interface is selected yet. " ::= { snMspsMrpInterconEntry 4 } snMspsMrpInterconPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocked(2), forwarding(3), notConnected(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational state of the Interconnection port. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - MRP Interconnection topology change frames, - MRP Interconnection test frames, - MRP Interconnection link change frames, - MRP Interconnection link status poll frames, - frames from other protocols that also define to pass blocked(2) ports. forwarding(3) indicates that all frames are passed through according to the forwarding behavior of IEEE 802.1D. notConnected(4) indicates that the port has no link. " ::= { snMspsMrpInterconEntry 5 } -- { snMspsMrpInterconEntry 6 } reserved for future use as VLAN ID snMspsMrpInterconMode OBJECT-TYPE SYNTAX INTEGER { disable(0), undefined(1), lcMode(2), rcMode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control the MRP Interconnection mode. The value disable(0) is used to set the entry persistent out of service (the corresponding row status has to be set) without losing the primary configuration (mainly admin role). In this case, the MRP Interconnection entity of this domain shall be disabled as is with admin role disable(0). The value undefined(1) signals that the interconnection mode is not disable(0) and neither set to lcMode(2) nor to rcMode(3). If the value is set to lcMode(2) the devices in Media redundancy Interconnection Manager (MIM) role as well as these in Media redundancy Interconnection Client role (MIC) are using the link check mode to detect open or closed interconnection links. If the value is set to rcMode(3) the device in Media redundancy Interconnection Manager (MIM) role is using the ring check mode to detect open or closed interconnection links. The factory settings are recommended to adjust the value of this object to the lcMode(2) capability. If the agent restricts the write access, no matter what reason, it shall reject write requests by responding with 'badValue'. " ::= { snMspsMrpInterconEntry 7 } snMspsMrpInterconAdminRole OBJECT-TYPE SYNTAX INTEGER { disable(0), client(1), manager(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control the MRP Interconnection behavior of the system per Media redundancy Interconnection domain. If the value is set to disable(0) the MRP Interconnection entity of this domain shall be disabled. If the value is set to client(1) the entity shall be set to the role of a Media redundancy Interconnection Client (MIC). If the value is set to manager(2) the entity shall be set to the role of a Media redundancy Interconnection Manager (MIM). The factory settings are recommended to adjust the value of this object to the client(1) capability of the component in order to prevent multiple managers are in the interconnection (the order of the capabilities are not necessarily conform to the order of the object values here). If the agent restricts the write access, no matter what reason, it shall reject write requests by responding with 'badValue'. " ::= { snMspsMrpInterconEntry 8 } snMspsMrpInterconOperRole OBJECT-TYPE SYNTAX INTEGER { disable(0), client(1), manager(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational role of an MRP Interconnection entity per Media redundancy Interconnection domain. A value of disable(0) signals that the entity doesn't work (whatever reason). A value of client(1) signals that the entity is in a Media redundancy Interconnection Client role. A value of manager(2) signals that the entity is the manager of this Media redundancy Interconnection domain. " ::= { snMspsMrpInterconEntry 9 } snMspsMrpInterconState OBJECT-TYPE SYNTAX INTEGER { disable(0), undefined(1), interconnOpen(2), interconnClosed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of a MIM of the MRP Interconnection entity. disable(0) – The entity is disabled. undefined(1) – Value is not valid. interconnOpen(2) – MRP Interconnection redundancy lost of this Media redundancy Interconnection domain. interconnClosed(3) – MRP Interconnection redundancy available of this Media redundancy Interconnection domain. " ::= { snMspsMrpInterconEntry 10 } -- { snMspsMrpInterconEntry 11 } reserved for future use as configuration status snMspsMrpInterconOpenCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for MRP Interconnection state changes to interconnOpen. " ::= { snMspsMrpInterconEntry 12 } snMspsMrpInterconLastOpenChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since last change of snMspsMrpInterconState to interconnOpen. " ::= { snMspsMrpInterconEntry 13 } snMspsMrpInterconPeerMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Device-MAC-Address of the devices interconnection peer, connected to the devices interlink port. This variable contains the MAC-Address contained in the media link check frame received at the interconnection port. " ::= { snMspsMrpInterconEntry 14 } -- { snMspsMrpInterconEntry 15 } reserved for future use as own MRM MAC address -- { snMspsMrpInterconEntry 16 } reserved for future use as coupled ring MRM MAC address -- { snMspsMrpInterconEntry 17 } reserved for future use as coupled ring MRP domain UUID snMspsMrpInterconAdminMICPosition OBJECT-TYPE SYNTAX INTEGER { primary(0), secondary(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0) the MRP Interconnection Client is a primary MRP Interconnection Client. If the value is set to secondary(1) the MRP Interconnection Client is the secondary MRP Interconnection Client. " ::= { snMspsMrpInterconEntry 18 } snMspsMrpInterconOperMICPosition OBJECT-TYPE SYNTAX INTEGER { primary(0), secondary(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reads the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0) the MRP Interconnection Client is a primary MRP Interconnection Client. If the value is set to secondary(1) the MRP Interconnection Client is the secondary MRP Interconnection Client. " ::= { snMspsMrpInterconEntry 19 } snMspsMrpInterconLinkCheckProfile OBJECT-TYPE SYNTAX INTEGER { undefined(0), primary(1), secondary(2), secondaryhigh(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the link check sensibility (check frame send interval and thus link check frame load) of the MRP Interconnection links. undefined(0) - link check profile not set. primary-default(1) - 10ms on primary MRP Interconnection link. secondary-default(2) - 1000ms on secondary MRP Interconnection link. secondary-high(4) - 10ms on secondary MRP Interconnection link. " ::= { snMspsMrpInterconEntry 28 } snMspsMrpInterconStartDelay OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in [100 ms] that an MRP Interconnection manager/client will wait before to enable the MRP Interconnection port even if the MRP Interconnection ring coupling configuration is not complete. The maximum value of 65535 (0xFFFF) means indefinite waiting. Some values are reserved and/or differ in meaning/usage, see below. ---------------------+----------------------------+------------------------- Value (hexadecimal) | Meaning | Usage ---------------------+----------------------------+------------------------- 0x0000 | Reserved | - 0x0001 | Value × 100 ms = 100 ms | Optional Startup delay 0x0002 | Value × 100 ms = 200 ms | Mandatory Startup delay 0x0003 - 0xEA60 | Value × 100 ms | Optional Startup delay 0xEA61 - 0xFFFE | Reserved | - 0xFFFF | Wait infinite time | Optional Startup delay ---------------------+----------------------------+------------------------- " ::= { snMspsMrpInterconEntry 29 } snMspsMrpInterconRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Support of creation and deletion of rows. A row can be taken out of service by writing the value notInService(2). " ::= { snMspsMrpInterconEntry 30 } -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapMrpInterconMgrOpenState NOTIFICATION-TYPE OBJECTS { snMspsMrpInterconIndex } STATUS current DESCRIPTION "MRP Interconnection state change to open." ::= { snMspsTrapPrefix 3001 } snMspsTrapMrpInterconMgrClosedState NOTIFICATION-TYPE OBJECTS { snMspsMrpInterconIndex } STATUS current DESCRIPTION "MRP Interconnection state change to closed." ::= { snMspsTrapPrefix 3002 } -- ---------------------------------------------------------------- -- MSPS DHCP Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: DHCP CLIENT MIB -- ---------------------------------------------------------------- snMspsDhcpClientControl OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value enabled(1) will run DHCP Client. The value disabled(2) will inhibit DHCP." DEFVAL {1} ::= { snMspsDhcpClient 1 } snMspsDhcpClientMode OBJECT-TYPE SYNTAX INTEGER { enabled-via-mac-address (1), enabled-via-client-id (2), enabled-via-sysname (3), enabled-via-nameofstation (4), enabled-via-iaidandduid (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value enabled-via-mac-address(1) sets DHCP Client Mode with option MAC Address as ClientId, enabled-via-client-id(2) runs DHCP Client Mode with option ClientId, enabled-via-sysname(3) runs DHCP Client with the sysname as ClientId, enabled-via-nameofstation(4) runs DHCP with the name of station as ClientId, enabled-via-iaidandduid(5) runs DHCP with RFC 3315 style identifier binding as client identifier. DUID type is determined by snMspsDhcpClientIfDuidType object." DEFVAL {1} ::= { snMspsDhcpClient 2 } snMspsDhcpClientConfigFileRequest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled(1) DHCP client requests option 66/67 ." DEFVAL {1} ::= { snMspsDhcpClient 3 } snMspsDhcpClientId OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively-assigned name for this DHCP client." DEFVAL {"default"} ::= { snMspsDhcpClient 4 } snMspsDhcpClientIPAddrKeepAlive OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled (1) DHCP client will retain the ip address from server accordingly to MSPS requirements. If disabled(2) DHCP client reset the ip address to 0.0.0.0 accordingly to RFC." ::= { snMspsDhcpClient 5 } -- DUID Group ------------------------------------------------------ snMspsDhcpClientDUID OBJECT IDENTIFIER ::= { snMspsDhcpClient 10 } SnMspsDhcpClientDuidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plus time 2 Vendor-assigned unique ID based on Enterprise Number 3 Link-layer address DUID Based on Link-layer Address plus Time [DUID-LLT] This type of DUID consists of a two octet type field containing the value 1, a two octet hardware type code, four octets containing a time value, followed by link-layer address of any one network interface that is connected to the DHCP device at the time that the DUID is generated. The time value is the time that the DUID is generated represented in seconds since midnight (UTC), January 1, 2000, modulo 2^32. The following diagram illustrates the format of a DUID-LLT: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 1 | hardware type (16 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time (32 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . link-layer address (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The choice of network interface can be completely arbitrary, as long as that interface provides a globally unique link-layer address for the link type, and the same DUID-LLT SHOULD be used in configuring all network interfaces connected to the device, regardless of which interface's link-layer address was used to generate the DUID-LLT. Clients and servers using this type of DUID MUST store the DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even if the network interface used to generate the DUID-LLT is removed. Clients and servers that do not have any stable storage MUST NOT use this type of DUID. Clients and servers that use this DUID SHOULD attempt to configure the time prior to generating the DUID, if that is possible, and MUST use some sort of time source (for example, a real-time clock) in generating the DUID, even if that time source could not be configured prior to generating the DUID. The use of a time source makes it unlikely that two identical DUID-LLTs will be generated if the network interface is removed from the client and another client then uses the same network interface to generate a DUID-LLT. A collision between two DUID-LLTs is very unlikely even if the clocks have not been configured prior to generating the DUID. This method of DUID generation is recommended for all general purpose computing devices such as desktop computers and laptop computers, and also for devices such as printers, routers, and so on, that contain some form of writable non-volatile storage. DUID Assigned by Vendor Based on Enterprise Number [DUID-EN] This form of DUID is assigned by the vendor to the device. It consists of the vendor's registered Private Enterprise Number as maintained by IANA [6] followed by a unique identifier assigned by the vendor. The following diagram summarizes the structure of a DUID-EN: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 2 | enterprise-number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | enterprise-number (contd) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | . identifier . . (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The source of the identifier is left up to the vendor defining it, but each identifier part of each DUID-EN MUST be unique to the device that is using it, and MUST be assigned to the device at the time it is manufactured and stored in some form of non-volatile storage. The generated DUID SHOULD be recorded in non-erasable storage. DUID Based on Link-layer Address [DUID-LL]:- This type of DUID consists of two octets containing the DUID type 3, a two octet network hardware type code, followed by the link-layer address of any one network interface that is permanently connected to the client or server device. The following diagram illustrates the format of a DUID-LL: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 3 | hardware type (16 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . link-layer address (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The choice of network interface can be completely arbitrary, as long as that interface provides a unique link-layer address and is permanently attached to the device on which the DUID-LL is being generated. The same DUID-LL SHOULD be used in configuring all network interfaces connected to the device, regardless of which interface's link-layer address was used to generate the DUID. DUID-LL is recommended for devices that have a permanently-connected network interface with a link-layer address, and do not have nonvolatile, writable stable storage. DUID-LL MUST NOT be used by DHCP clients or servers that cannot tell whether or not a network interface is permanently attached to the device on which the DHCP client is running." REFERENCE "Section 9. DHCP Unique Identifier (DUID) RFC 3315" SYNTAX INTEGER { dtLlt (1), dtEn (2), dtLl (3) } SnMspsDhcpClientDuidValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in messages where a client needs to be identified. Clients MUST treat DUIDs as opaque values and MUST only compare DUIDs for equality Clients and servers MUST NOT in any Other way interpret DUIDs. The DUID is carried in an option because it may be variable length and because it is not required in all DHCP messages. The DUID is designed to be unique across all DHCP clients and servers, and stable for any specific client or server - that is, the DUID used by a client or server SHOULD NOT change over time if at all possible; for example, a device's DUID should not change as a result of a change in the device's network hardware. The motivation for having more than one type of DUID is that the DUID must be globally unique, and must also be easy to generate. The sort of globally-unique identifier that is easy to generate for any given device can differ quite widely. Also, some devices may not contain any persistent storage. Retaining a generated DUID in such a device is not possible, so the DUID scheme must accommodate such devices. A DUID can be no more than 130(including the type code) octets long." REFERENCE "Section 9. DHCP Unique Identifier (DUID) RFC 3315" SYNTAX OCTET STRING (SIZE(1..130)) snMspsDhcpClientDuidType OBJECT-TYPE SYNTAX SnMspsDhcpClientDuidType MAX-ACCESS read-write STATUS current DESCRIPTION "This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client will use the Link layer address of the interface and Current System time value for the Client Identifier option TLV value. The value dtEn (2) indicates that DHCP client will use the Vendor-assigned unique ID based on Enterprise Number for the Client Identifier option TLV value. The value dtLl (3) indicates that DHCP client will use the link layer address for the client Identifier option TLV value." DEFVAL { dtLlt } ::= { snMspsDhcpClientDUID 1 } snMspsDhcpClientDuidLltValue OBJECT-TYPE SYNTAX SnMspsDhcpClientDuidValue MAX-ACCESS read-only STATUS current DESCRIPTION "This Object contains the value of Link-layer Address plus Time DUID. This DUID value is used by client if dtLlt is selected in snMspsDhcpClientDuidType." ::= { snMspsDhcpClientDUID 2 } snMspsDhcpClientDuidEnValue OBJECT-TYPE SYNTAX SnMspsDhcpClientDuidValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of vendor-assigned unique ID based on Enterprise Number DUID. This DUID value is used by client if dtEn is selected in snMspsDhcpClientDuidType." ::= { snMspsDhcpClientDUID 3 } snMspsDhcpClientDuidLlValue OBJECT-TYPE SYNTAX SnMspsDhcpClientDuidValue MAX-ACCESS read-only STATUS current DESCRIPTION "This Object contains the value of Link-layer address DUID. This DUID value is used by client if dtLl is selected in snMspsDhcpClientDuidType." ::= { snMspsDhcpClientDUID 4 } snMspsDhcpClientDuidConfigStatus OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to identify duid values are auto generated or manually configured. 0x00 -- All(dtLlt,dtEn,dtLl) duid types are auto generated. 0x01 -- dtLlt manually configured. 0x02 -- dtEn manually configured. 0x03 -- dtLlt and dtEn manually configured. 0x04 -- dtLl manually configured. 0x05 -- dtLlt and dtLl manually configured. 0x06 -- dtEn and dtLl manually configured. 0x07 -- dtLlt,dtEn and dtLl manually configured." DEFVAL { 0 } ::= { snMspsDhcpClientDUID 5 } snMspsDhcpRelaying OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Only when enabled, the Relay Agent shall become active." DEFVAL { disable } ::= { snMspsDhcpRelay 1 } snMspsDhcpRelayServersOnly OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server." DEFVAL { disable } ::= { snMspsDhcpRelay 2 } snMspsDhcpRelaySecsThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IF the secs field in the DHCP message is greater than the snMspsDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent" DEFVAL { 0 } ::= { snMspsDhcpRelay 3 } snMspsDhcpRelayHopsThreshold OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the snMspsDhcpRelayHopsThreshold, Packet get dropped at the Relay Agent " DEFVAL { 4 } ::= { snMspsDhcpRelay 4 } snMspsDhcpRelayRAIOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a packet from a client to a server and examining/stripping of options when relaying a packet from a server to a client." DEFVAL { disable } ::= { snMspsDhcpRelay 5 } snMspsDhcpRelayRAICircuitIDSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { snMspsDhcpRelay 6 } snMspsDhcpRelayRAIRemoteIDSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { snMspsDhcpRelay 7 } snMspsDhcpRelayRAISubnetMaskSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { snMspsDhcpRelay 8 } snMspsDhcpRelayRAIAddressFieldActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Relay Agent Information (RAI) Address Field on the Relay Agent." DEFVAL { false } ::= { snMspsDhcpRelay 9 } snMspsDhcpRelayRAIAddressFieldInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Relay Agent insert the gi address field using ip address of the given interface. The value of this MIB object will only be considered if 'snMspsDhcpRelayRAIAddressFieldActivated' is true." ::= { snMspsDhcpRelay 10 } -- snMspsDhcpRelay 11-15 reserved snMspsDhcpConfigDhcpCircuitOption OBJECT-TYPE SYNTAX BITS { routerindex(0), -- Router Interfce Index vlanid(1), -- vlanId recvport(2) -- port or lag port } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It is possible to set more than one bit at a time.Currently first three bits are used and remaning bits are reserved for future purpose" ::= { snMspsDhcpRelay 16 } --IPADDRESS_TABLE_BEGIN snMspsDhcpRelaySrvAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpRelaySrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client. This object becomes active only when snMspsDhcpRelayServersOnly is enabled." ::= { snMspsDhcpRelay 17 } snMspsDhcpRelaySrvAddressEntry OBJECT-TYPE SYNTAX SnMspsDhcpRelaySrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { snMspsDhcpRelaySrvIpAddress } ::= { snMspsDhcpRelaySrvAddressTable 1 } SnMspsDhcpRelaySrvAddressEntry ::= SEQUENCE { snMspsDhcpRelaySrvIpAddress IpAddress, snMspsDhcpRelaySrvAddressRowStatus RowStatus } snMspsDhcpRelaySrvIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of the DHCP server." ::= { snMspsDhcpRelaySrvAddressEntry 1 } snMspsDhcpRelaySrvAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus of this entry." ::= { snMspsDhcpRelaySrvAddressEntry 2 } --IPADDRESS_TABLE_END --INTERFACE_TABLE_BEGIN snMspsDhcpRelayIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpRelayIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds the circuit id SubOption configured over the interface.This option will be inserted for dhcp request packets received on this interface based on the status of snMspsDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp broadcast response is sent on the appropriate interface over which the broadcast dhcp request was received." ::= { snMspsDhcpRelay 18 } snMspsDhcpRelayIfEntry OBJECT-TYPE SYNTAX SnMspsDhcpRelayIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains configured dhcp relay information suboptions" INDEX { ifIndex } ::= { snMspsDhcpRelayIfTable 1 } SnMspsDhcpRelayIfEntry ::= SEQUENCE { snMspsDhcpRelayIfCircuitId Unsigned32, snMspsDhcpRelayIfRemoteId DisplayString, snMspsDhcpRelayIfRowStatus RowStatus, snMspsDhcpRelayIfRemoteIdSource INTEGER } snMspsDhcpRelayIfCircuitId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Circuit Id value configured over this interface.Values other than interface indices can be configured for this object.Configuring with zero value will reset the circuit id configuration for this interface.Circuit id will be inserted to dhcp request packet received on this interface if snMspsDhcpRelayRAICircuitIDSubOptionControl is enabled" ::= { snMspsDhcpRelayIfEntry 1 } snMspsDhcpRelayIfRemoteId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Id value configured over this interface.String of length zero will reset the configuration.Value other than XYZ (which is the considered as default value internally) can be configured for this object.Remote ID will be inserted to dhcp request packet received on this interface if snMspsDhcpRelayRAIRemoteIDSubOptionControl is enabled" ::= { snMspsDhcpRelayIfEntry 2 } snMspsDhcpRelayIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of this table" ::= { snMspsDhcpRelayIfEntry 3 } snMspsDhcpRelayIfRemoteIdSource OBJECT-TYPE SYNTAX INTEGER { freetext (1), macaddress (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When freetext is selected, the value of snMspsDhcpRelayIfRemoteId will be taken into consideration as the Remote Id. When macaddress is selected, MAC address of the interface will be taken into consideration as the Remote Id." DEFVAL { freetext } ::= { snMspsDhcpRelayIfEntry 4 } --INTERFACE_TABLE_END snMspsDhcpRelayRemoteId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string based Remote ID value assigned by DHCP relay agent which uniquely identifies the client." ::= { snMspsDhcpRelay 19 } -- ---------------------- -- snMspsDhcpServer.mib -- -- SIEMENS AG -- Industry Automation Division -- -- object definitions for the management of a DHCP server implementation -- -- Copyright (c) 2013 Siemens AG -- All rights reserved. -- ---------------------------------------------------------------------- -- -- MIB Module : SN-MSPS-DHCP-SERVER-MIB -- -- Revision : V0.0.0.4 -- Date : 2018/02/26 -- -- ---------------------------------------------------------------------- snMspsDhcpServerObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation." ::= { snMspsDhcpServer 1 } snMspsDhcpV4ServerObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation." ::= { snMspsDhcpServerObjects 4 } snMspsDhcpV4SrvConfig OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base objects with systemic scope." ::= { snMspsDhcpV4ServerObjects 1 } snMspsDhcpV4SrvActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. global DHCP server enable/disable flag." ::= { snMspsDhcpV4SrvConfig 1 } snMspsDhcpV4SrvIcmpEchoProbeActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. When set to to true, the DHCP server will probe an IP address whether it is already in use before offering it to a DHCP client." ::= { snMspsDhcpV4SrvConfig 2 } snMspsDhcpV4SrvSubnetPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDhcpV4ServerObjects 2 } snMspsDhcpV4SrvSubnetPoolEntry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvSubnetPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDhcpV4SrvSubnetPoolIndex } ::= { snMspsDhcpV4SrvSubnetPoolTable 1 } SnMspsDhcpV4SrvSubnetPoolEntry ::= SEQUENCE { snMspsDhcpV4SrvSubnetPoolIndex Unsigned32, snMspsDhcpV4SrvSubnetPoolIfIndex InterfaceIndex, snMspsDhcpV4SrvSubnetPoolSubnetAddr InetAddressIPv4, snMspsDhcpV4SrvSubnetPoolPrfxLength InetAddressPrefixLength, snMspsDhcpV4SrvSubnetPoolLowerAddress InetAddressIPv4, snMspsDhcpV4SrvSubnetPoolUpperAddress InetAddressIPv4, snMspsDhcpV4SrvSubnetPoolLeaseTime Unsigned32, snMspsDhcpV4SrvSubnetPoolPortList PortList, snMspsDhcpV4SrvSubnetPoolRowStatus RowStatus } snMspsDhcpV4SrvSubnetPoolIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An auxiliary index." ::= { snMspsDhcpV4SrvSubnetPoolEntry 1 } snMspsDhcpV4SrvSubnetPoolIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the bound interface." ::= { snMspsDhcpV4SrvSubnetPoolEntry 2 } snMspsDhcpV4SrvSubnetPoolSubnetAddr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet address." ::= { snMspsDhcpV4SrvSubnetPoolEntry 3 } snMspsDhcpV4SrvSubnetPoolPrfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length." ::= { snMspsDhcpV4SrvSubnetPoolEntry 4 } snMspsDhcpV4SrvSubnetPoolLowerAddress OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The lower IP address." ::= { snMspsDhcpV4SrvSubnetPoolEntry 5 } snMspsDhcpV4SrvSubnetPoolUpperAddress OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The upper IP address." ::= { snMspsDhcpV4SrvSubnetPoolEntry 6 } snMspsDhcpV4SrvSubnetPoolLeaseTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The lease time." ::= { snMspsDhcpV4SrvSubnetPoolEntry 7 } snMspsDhcpV4SrvSubnetPoolPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The Subnet Pool Port List." DEFVAL { ''H } -- empty binary string ::= { snMspsDhcpV4SrvSubnetPoolEntry 8 } snMspsDhcpV4SrvSubnetPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { snMspsDhcpV4SrvSubnetPoolEntry 12 } snMspsDhcpV4SrvSubnetOptTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDhcpV4ServerObjects 3 } snMspsDhcpV4SrvSubnetOptEntry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvSubnetOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptCode } ::= { snMspsDhcpV4SrvSubnetOptTable 1 } SnMspsDhcpV4SrvSubnetOptEntry ::= SEQUENCE { snMspsDhcpV4SrvSubnetOptCode Unsigned32, snMspsDhcpV4SrvSubnetOptUseIfIp TruthValue, snMspsDhcpV4SrvSubnetOptLength Unsigned32, snMspsDhcpV4SrvSubnetOptValue OCTET STRING, snMspsDhcpV4SrvSubnetOptRowStatus RowStatus } snMspsDhcpV4SrvSubnetOptCode OBJECT-TYPE SYNTAX Unsigned32(1..254) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. The DHCP option tag code." REFERENCE "RFC 2132; RFC 3942; RFC 4833." ::= { snMspsDhcpV4SrvSubnetOptEntry 1 } snMspsDhcpV4SrvSubnetOptUseIfIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. Use the interface's IP address from the subnet specified by the pool if applicable to the option's semantics." ::= { snMspsDhcpV4SrvSubnetOptEntry 2 } snMspsDhcpV4SrvSubnetOptLength OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. The length of the options's data part not including the two octets specifying the tag code and length." REFERENCE "RFC 2132; RFC 3942; RFC 4833." ::= { snMspsDhcpV4SrvSubnetOptEntry 3 } snMspsDhcpV4SrvSubnetOptValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. The data part of the DHCP option." REFERENCE "RFC 2132; RFC 3942; RFC 4833." ::= { snMspsDhcpV4SrvSubnetOptEntry 4 } snMspsDhcpV4SrvSubnetOptRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { snMspsDhcpV4SrvSubnetOptEntry 7 } snMspsDhcpV4SrvHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDhcpV4ServerObjects 4 } snMspsDhcpV4SrvHostEntry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDhcpV4SrvHostHwType, snMspsDhcpV4SrvHostClientId, snMspsDhcpV4SrvSubnetPoolIndex } ::= { snMspsDhcpV4SrvHostTable 1 } SnMspsDhcpV4SrvHostEntry ::= SEQUENCE { snMspsDhcpV4SrvHostHwType Unsigned32, snMspsDhcpV4SrvHostClientId OCTET STRING, snMspsDhcpV4SrvHostAddress InetAddressIPv4, snMspsDhcpV4SrvHostRowStatus RowStatus } snMspsDhcpV4SrvHostHwType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hardware type as defined in STD 2. E.g. a value of 1 means Ethernet, and a value 0 denotes a c a non-HW" REFERENCE "RFC 1700; RFC 3232; RFC 4361." ::= { snMspsDhcpV4SrvHostEntry 1 } snMspsDhcpV4SrvHostClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. The data part of the DHCP option." REFERENCE "RFC 2132; RFC 3942; RFC 4833." ::= { snMspsDhcpV4SrvHostEntry 2 } snMspsDhcpV4SrvHostAddress OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The desired IP address." ::= { snMspsDhcpV4SrvHostEntry 3 } snMspsDhcpV4SrvHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { snMspsDhcpV4SrvHostEntry 12 } snMspsDhcpV4SrvBindTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDhcpV4ServerObjects 7 } snMspsDhcpV4SrvBindEntry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDhcpV4SrvBindIpAddress } ::= { snMspsDhcpV4SrvBindTable 1 } SnMspsDhcpV4SrvBindEntry ::= SEQUENCE { snMspsDhcpV4SrvBindIpAddress IpAddress, snMspsDhcpV4SrvBindHwType INTEGER, snMspsDhcpV4SrvBindHwAddress OCTET STRING, snMspsDhcpV4SrvBindExpireTime INTEGER, snMspsDhcpV4SrvBindAllocMethod INTEGER, snMspsDhcpV4SrvBindState INTEGER, snMspsDhcpV4SrvBindXid Unsigned32, snMspsDhcpV4SrvBindPoolID INTEGER, snMspsDhcpV4SrvBindOptionCode82RemoteIdValue DisplayString, snMspsDhcpV4SrvBindOptionCode82CircuitIdValue DisplayString } snMspsDhcpV4SrvBindIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " IpAddress associated with the binding." ::= { snMspsDhcpV4SrvBindEntry 1 } snMspsDhcpV4SrvBindHwType OBJECT-TYPE SYNTAX INTEGER { clientid (0), ethernet (1), duid (255) } MAX-ACCESS read-only STATUS current DESCRIPTION " Hardware address type of the binding. Value 0, Indicates client identifier." ::= { snMspsDhcpV4SrvBindEntry 4 } snMspsDhcpV4SrvBindHwAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Hardware address of the binding." ::= { snMspsDhcpV4SrvBindEntry 7 } snMspsDhcpV4SrvBindExpireTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates time remaining for the binding. Negative Values indicate already expired binding." ::= { snMspsDhcpV4SrvBindEntry 10 } snMspsDhcpV4SrvBindAllocMethod OBJECT-TYPE SYNTAX INTEGER { dynamic (1), static-leases (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the binding is for statically assigned ip-address or automatically assigned from the pool." ::= { snMspsDhcpV4SrvBindEntry 13 } snMspsDhcpV4SrvBindState OBJECT-TYPE SYNTAX INTEGER { offered (1), assigned (2), probing (5), unknown(10) } MAX-ACCESS read-only STATUS current DESCRIPTION " State of the binding. In offered state offer has been sent, but no req has been received from the client.In assigned state the address is assigned to the client. In probing state the address is currently being probed by the dhcp server." ::= { snMspsDhcpV4SrvBindEntry 16 } snMspsDhcpV4SrvBindXid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transaction ID, a random number chosen by the client, used by the client and server to associate messages and responses between a client and a server." ::= { snMspsDhcpV4SrvBindEntry 19 } snMspsDhcpV4SrvBindPoolID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "ID of pool containing the automatically assigned IpAddress." ::= { snMspsDhcpV4SrvBindEntry 22 } snMspsDhcpV4SrvBindOptionCode82RemoteIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote ID value. Empty, if Option 82 is not supported by device." ::= { snMspsDhcpV4SrvBindEntry 30 } snMspsDhcpV4SrvBindOptionCode82CircuitIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Circuit ID value. Empty, if Option 82 is not supported by device." ::= { snMspsDhcpV4SrvBindEntry 31 } snMspsDhcpV4SrvSubnetOptionCode82Table OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptionCode82Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP subnet option code 82 table" ::= { snMspsDhcpV4ServerObjects 12 } snMspsDhcpV4SrvSubnetOptionCode82Entry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvSubnetOptionCode82Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex } ::= { snMspsDhcpV4SrvSubnetOptionCode82Table 1 } SnMspsDhcpV4SrvSubnetOptionCode82Entry ::= SEQUENCE { snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex Unsigned32, snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue DisplayString, snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue DisplayString, snMspsDhcpV4SrvSubnetOptionCode82RowStatus RowStatus } snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Auxilary Index of snMspsDhcpV4SrvSubnetOptionCode82Table" ::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 1 } snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote ID value" DEFVAL { "" } ::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 2 } snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote ID value" DEFVAL { "" } ::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 3 } snMspsDhcpV4SrvSubnetOptionCode82RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the status of the row " ::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 10 } --- snMspsDhcpV4SrvHostOptTable snMspsDhcpV4SrvHostOptTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the host specific options that are to be used by the server on response to a DHCP DISCOVER message in a DHCP OFFER message." ::= { snMspsDhcpV4ServerObjects 13 } snMspsDhcpV4SrvHostOptEntry OBJECT-TYPE SYNTAX SnMspsDhcpV4SrvHostOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The various option objects common to all DHCP offer messages." INDEX { snMspsDhcpV4SrvHostType, snMspsDhcpV4SrvHostId, snMspsDhcpV4SrvSubnetPoolIndex,snMspsDhcpV4SrvHostOptType } ::= { snMspsDhcpV4SrvHostOptTable 1 } -- SnMspsDhcpV4SrvHostOptEntry ::= SEQUENCE { snMspsDhcpV4SrvHostType INTEGER, snMspsDhcpV4SrvHostId OCTET STRING, snMspsDhcpV4SrvHostOptType INTEGER, snMspsDhcpV4SrvHostOptLen INTEGER, snMspsDhcpV4SrvHostOptVal OCTET STRING, snMspsDhcpV4SrvHostOptRowStatus RowStatus } snMspsDhcpV4SrvHostType OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the type of host identifier, whether this host specific entry is based on hardware or non-hardware of the client. This option is one of the index in the snMspsDhcpV4SrvHostOptTable" ::= { snMspsDhcpV4SrvHostOptEntry 1 } snMspsDhcpV4SrvHostId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifies the host.This id is an index to this table" ::= { snMspsDhcpV4SrvHostOptEntry 2 } snMspsDhcpV4SrvHostOptType OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifies the option, this is the tag octet of the DHCP option. This option is the index in the snMspsDhcpV4SrvSubnetOptTable." ::= { snMspsDhcpV4SrvHostOptEntry 3 } snMspsDhcpV4SrvHostOptLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the length of the option indicated by the option type. This length does not include the two octets specifiying the tag and length. " ::= { snMspsDhcpV4SrvHostOptEntry 4 } snMspsDhcpV4SrvHostOptVal OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the octets of data, of length specified by snMspsDhcpV4SrvHostOptLen for that entry. " ::= { snMspsDhcpV4SrvHostOptEntry 5 } snMspsDhcpV4SrvHostOptRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of this entry." ::= { snMspsDhcpV4SrvHostOptEntry 10 } snMspsDhcpV6ServerObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation." ::= { snMspsDhcpServerObjects 6 } -- ---------------------- -- snMspsDhcpClient6.mib -- -- SIEMENS AG -- Industry Automation Division -- -- RFC-3736 Stateless DHCPv6 Client MIB -- -- Copyright (c) 2013 Siemens AG -- All rights reserved. -- ---------------------- snMspsDhcpClient6Config OBJECT IDENTIFIER ::= { snMspsDhcpClient6 0 } snMspsDhcpClient6Counters OBJECT IDENTIFIER ::= { snMspsDhcpClient6 1 } -- ****************************************************************** -- Textual conventions -- ****************************************************************** SnMspsDhcpClient6DuidValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in messages where a client needs to be identified. Clients MUST treat DUIDs as opaque values and MUST only compare DUIDs for equality Clients and servers MUST NOT in any Other way interpret DUIDs. The DUID is carried in an option because it may be variable length and because it is not required in all DHCP messages. The DUID is designed to be unique across all DHCP clients and servers, and stable for any specific client or server - that is, the DUID used by a client or server SHOULD NOT change over time if at all possible; for example, a device's DUID should not change as a result of a change in the device's network hardware. The motivation for having more than one type of DUID is that the DUID must be globally unique, and must also be easy to generate. The sort of globally-unique identifier that is easy to generate for any given device can differ quite widely. Also, some devices may not contain any persistent storage. Retaining a generated DUID in such a device is not possible, so the DUID scheme must accommodate such devices. A DUID can be no more than 130(including the type code) octets long." REFERENCE "Section 9. DHCP Unique Identifier (DUID) RFC 3315" SYNTAX OCTET STRING (SIZE(1..130)) SnMspsDhcpClient6DuidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plus time 2 Vendor-assigned unique ID based on Enterprise Number 3 Link-layer address DUID Based on Link-layer Address plus Time [DUID-LLT] This type of DUID consists of a two octet type field containing the value 1, a two octet hardware type code, four octets containing a time value, followed by link-layer address of any one network interface that is connected to the DHCP device at the time that the DUID is generated. The time value is the time that the DUID is generated represented in seconds since midnight (UTC), January 1, 2000, modulo 2^32. The following diagram illustrates the format of a DUID-LLT: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 1 | hardware type (16 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time (32 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . link-layer address (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The choice of network interface can be completely arbitrary, as long as that interface provides a globally unique link-layer address for the link type, and the same DUID-LLT SHOULD be used in configuring all network interfaces connected to the device, regardless of which interface's link-layer address was used to generate the DUID-LLT. Clients and servers using this type of DUID MUST store the DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even if the network interface used to generate the DUID-LLT is removed. Clients and servers that do not have any stable storage MUST NOT use this type of DUID. Clients and servers that use this DUID SHOULD attempt to configure the time prior to generating the DUID, if that is possible, and MUST use some sort of time source (for example, a real-time clock) in generating the DUID, even if that time source could not be configured prior to generating the DUID. The use of a time source makes it unlikely that two identical DUID-LLTs will be generated if the network interface is removed from the client and another client then uses the same network interface to generate a DUID-LLT. A collision between two DUID-LLTs is very unlikely even if the clocks have not been configured prior to generating the DUID. This method of DUID generation is recommended for all general purpose computing devices such as desktop computers and laptop computers, and also for devices such as printers, routers, and so on, that contain some form of writable non-volatile storage. DUID Assigned by Vendor Based on Enterprise Number [DUID-EN] This form of DUID is assigned by the vendor to the device. It consists of the vendor's registered Private Enterprise Number as maintained by IANA [6] followed by a unique identifier assigned by the vendor. The following diagram summarizes the structure of a DUID-EN: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 2 | enterprise-number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | enterprise-number (contd) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | . identifier . . (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The source of the identifier is left up to the vendor defining it, but each identifier part of each DUID-EN MUST be unique to the device that is using it, and MUST be assigned to the device at the time it is manufactured and stored in some form of non-volatile storage. The generated DUID SHOULD be recorded in non-erasable storage. DUID Based on Link-layer Address [DUID-LL]:- This type of DUID consists of two octets containing the DUID type 3, a two octet network hardware type code, followed by the link-layer address of any one network interface that is permanently connected to the client or server device. The following diagram illustrates the format of a DUID-LL: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 3 | hardware type (16 bits) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . link-layer address (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The choice of network interface can be completely arbitrary, as long as that interface provides a unique link-layer address and is permanently attached to the device on which the DUID-LL is being generated. The same DUID-LL SHOULD be used in configuring all network interfaces connected to the device, regardless of which interface's link-layer address was used to generate the DUID. DUID-LL is recommended for devices that have a permanently-connected network interface with a link-layer address, and do not have nonvolatile, writable stable storage. DUID-LL MUST NOT be used by DHCP clients or servers that cannot tell whether or not a network interface is permanently attached to the device on which the DHCP client is running." REFERENCE "Section 9. DHCP Unique Identifier (DUID) RFC 3315" SYNTAX INTEGER { dtLlt (1), dtEn (2), dtLl (3) } -- ****************************************************************** -- Start of Interface Table {snMspsDhcpClient6IfTable) -- ****************************************************************** snMspsDhcpClient6IfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpClient6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the config info of DHCPv6 Client on each interface. using this table user can enable or disable DHCPv6 client(statefull or stateless or prefix delegation) on each interface." ::= { snMspsDhcpClient6Config 1 } snMspsDhcpClient6IfEntry OBJECT-TYPE SYNTAX SnMspsDhcpClient6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the snMspsDhcpClient6CounterTable" INDEX {snMspsDhcpClient6IfIndex} ::= { snMspsDhcpClient6IfTable 1 } SnMspsDhcpClient6IfEntry ::= SEQUENCE { snMspsDhcpClient6IfIndex Integer32, snMspsDhcpClient6IfMode INTEGER, snMspsDhcpClient6IfRapidCommitMode TruthValue, snMspsDhcpClient6IfSrvAddress OCTET STRING, snMspsDhcpClient6IfDuidType SnMspsDhcpClient6DuidType, snMspsDhcpClient6IfDuid SnMspsDhcpClient6DuidValue, snMspsDhcpClient6IfDuidIfIndex Integer32, snMspsDhcpClient6IfMinRefreshTime Unsigned32, snMspsDhcpClient6IfCurrRefreshTime Unsigned32, snMspsDhcpClient6IfRealmName OCTET STRING, snMspsDhcpClient6IfKey OCTET STRING, snMspsDhcpClient6IfKeyId Unsigned32, snMspsDhcpClient6IfPrefixName OCTET STRING, snMspsDhcpClient6IfIataOptStatus TruthValue, snMspsDhcpClient6IfPdExcludePrefix OCTET STRING, snMspsDhcpClient6IfPdExcludePrefixLen Integer32, snMspsDhcpClient6IfReconfigAcceptMode TruthValue, snMspsDhcpClient6IfRowStatus RowStatus } snMspsDhcpClient6IfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of one entry in snMspsDhcpClient6IfTable.and indicates interface index" ::= { snMspsDhcpClient6IfEntry 1 } snMspsDhcpClient6IfMode OBJECT-TYPE SYNTAX INTEGER { sf-dhcp (1), sl-dhcp (2), pd (3), ra-flags-based (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Currently 3 different DHCP client types available. 1.Statefull dhcp(sf-dhcp) client.Using sf-dhcp client node will get address and other information from server. RFC 3315 for sf-dhcp. 2.Stateless dhcp(sl-dhcp) client.Using sl-dhcp client node will get other informations from server.RFC 3736 for sl-dhcp. 3.Prefix Delegation(pd) client.Using pd client node will get prefixs from server. RFC 3633 for pd. 4.Router Advertisement flags based DHCP Client. This is an intermediate mode in which the operating mode (i.e. stateless or stateful) is decided based on M-, and O-Flags of any received Router Advertisement on this interface. RFC 4861 for router advertisement flags M and O" DEFVAL { 1 } ::= { snMspsDhcpClient6IfEntry 2 } snMspsDhcpClient6IfRapidCommitMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Rapid Commit mode is used to signal the use of the two message exchange for address or prefix assignment.if user set this option to true(1) then client will include this option in solicit message and assign address after getting reply message from server. If user set this option to false(2) then client will use Four messages for assigning address. This option related to snMspsDhcpClient6IfMode is sf-dhcp(1) and pd(3)." DEFVAL { false } ::= { snMspsDhcpClient6IfEntry 3 } snMspsDhcpClient6IfSrvAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the IP Address of the current DHCP server." ::= { snMspsDhcpClient6IfEntry 4 } snMspsDhcpClient6IfDuidType OBJECT-TYPE SYNTAX SnMspsDhcpClient6DuidType MAX-ACCESS read-write STATUS current DESCRIPTION "This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client will use the Link layer address of the interface and Current System time value for the Client Identifier option TLV value. The value dtEn (2) indicates that DHCP client will use the Vendor-assigned unique ID based on Enterprise Number for the Client Identifier option TLV value. The value dtLl (3) indicates that DHCP client will use the link layer address for the client Identifier option TLV value." DEFVAL { dtLlt } ::= { snMspsDhcpClient6IfEntry 5 } snMspsDhcpClient6IfDuid OBJECT-TYPE SYNTAX SnMspsDhcpClient6DuidValue MAX-ACCESS read-only STATUS current DESCRIPTION "This Object contains the value of DUID used as client ID. Depending upon the snMspsDhcpClient6ClientIdType this will return the current value of the DUID." ::= { snMspsDhcpClient6IfEntry 6 } snMspsDhcpClient6IfDuidIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Interface which will be used for formation of DUID Based on Link-layer Address plus Time and DUID based on Link-layer Address, if not specified then an arbitrary interface value will be used." ::= { snMspsDhcpClient6IfEntry 7 } snMspsDhcpClient6IfMinRefreshTime OBJECT-TYPE SYNTAX Unsigned32 (600..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This objects specifies the minimum acceptable information refresh time. If the server sends an information refresh time option of less than the configured minimum refresh time, the configured minimum refresh time will be used instead. the information request message. The units of refresh timer is 10ms." DEFVAL { 86400 } ::= { snMspsDhcpClient6IfEntry 8 } snMspsDhcpClient6IfCurrRefreshTime OBJECT-TYPE SYNTAX Unsigned32 (600..4294967295) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This objects specifies the current information refresh time. The value of current refresh timer will be the minimum value of snMspsDhcpClient6IfMinRefreshTime or received Refresh option request value in reply message . The units of refresh timer is sec." ::= { snMspsDhcpClient6IfEntry 9 } snMspsDhcpClient6IfRealmName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the unique name of the container for the HMAC-MD5 authentication key." ::= { snMspsDhcpClient6IfEntry 10 } snMspsDhcpClient6IfKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the HMAC-MD5 key string which will be used to authenticate the client sending messages." ::= { snMspsDhcpClient6IfEntry 11 } snMspsDhcpClient6IfKeyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indentifies the key-ID to be used with snMspsDhcpClient6AuthKey object and is transmitted as part of authentication information in client sending messages, the server using this key-ID searches in its local database for the related key to calculate the HMAC." DEFVAL { 1 } ::= { snMspsDhcpClient6IfEntry 12 } snMspsDhcpClient6IfPrefixName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates IPv6 Prefix name for prefix assigned by dhcpv6 server. This obeject should be set if snMspsDhcpClient6IfMode object is set to pd(3)." ::= { snMspsDhcpClient6IfEntry 13 } snMspsDhcpClient6IfIataOptStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates IATA opt enable or disable status.if user set this option to true(1) then client will get Temporary Addresses from server. If user set this option to false(2) then client will not get Temporary Addresses from server. This option related to snMspsDhcpClient6IfMode is sf-dhcp(1)." DEFVAL { false } ::= { snMspsDhcpClient6IfEntry 14 } snMspsDhcpClient6IfPdExcludePrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the IPv6 exclude prefix from the DHCPv6 server." ::= { snMspsDhcpClient6IfEntry 15 } snMspsDhcpClient6IfPdExcludePrefixLen OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the excluded prefix in bits. The prefix-len MUST be between 'OPTION_IAPREFIX prefix-length'+1 and 128." ::= { snMspsDhcpClient6IfEntry 16 } snMspsDhcpClient6IfReconfigAcceptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A client uses the Reconfigure Accept option to announce to the server whether the client is willing to accept Reconfigure messages, and a server uses this option to tell the client whether or not to accept Reconfigure messages. If user set true(1) then client will include this option in all client sending messages. This option related to snMspsDhcpClient6IfMode is sf-dhcp(1) and pd(3)." DEFVAL { false } ::= { snMspsDhcpClient6IfEntry 17 } snMspsDhcpClient6IfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will also be deleted. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). If a manager sets this object to createAndGo(4) then by default client act as sf-dhcp(1). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the 'snMspsDhcpClient6IfRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) if snMspsDhcpClient6IfMode set to pd(3) until (minimally) the corresponding instance of snMspsDhcpClient6IfPrefixName, has been set. if snMspsDhcpClient6IfMode set to sf-dhcp(1) or sl-dhcp(2) then before active(1) manager should configure required options in snMspsDhcpClient6OptionTable. notInService(2) should be used to administratively bring the row down before changing any object. A typical order of operation to add a row is: 1. Create a row in snMspsDhcpClient6IfTable with createAndWait(5). 2. If required modify client type using snMspsDhcpClient6IfMode object. Any configure other required objects. 3. Set snMspsDhcpClient6IfPrefixName if snMspsDhcpClient6IfMode set to pd(3). 4. (OPTIONAL)Configure snMspsDhcpClient6OptionTable if snMspsDhcpClient6IfMode set to sf-dhcp(1) or sl-dhcp(2). 5. Set to active(1)." ::= { snMspsDhcpClient6IfEntry 18 } -- ****************************************************************** -- End of Interface Table {snMspsDhcpClient6IfTable) -- ****************************************************************** -- ****************************************************************** -- Start of Client Option Table {snMspsDhcpClient6OptionTable) -- ****************************************************************** snMspsDhcpClient6OptionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpClient6OptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Dhcpv6 options which are to be requested to server will be added as entries in this table. While sending out client sending messages(ex:solicit,information...), the options entries which are avilable in this table will be added with client sending messages(ex:solicit,information...). The option values which are received via server response messages (ex:advertise,conform,reply....) will be stored in this table. Following are valid options :- 1 User class option 15 2 Vendor class option 16 3 Vendor-specific Information 17 4 DNS recursive name server 23 5 Domain search list 24. 6 Sntp server address 31. 7 Posix time zone 41. 8 Tzdb time zone 42. 9 Ntp server address 56." ::= { snMspsDhcpClient6Config 2 } snMspsDhcpClient6OptionEntry OBJECT-TYPE SYNTAX SnMspsDhcpClient6OptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Client Option Table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute values." INDEX { snMspsDhcpClient6IfIndex, snMspsDhcpClient6OptionType } ::= { snMspsDhcpClient6OptionTable 1 } SnMspsDhcpClient6OptionEntry ::= SEQUENCE { snMspsDhcpClient6OptionType Integer32, snMspsDhcpClient6OptionLength Integer32, snMspsDhcpClient6OptionValue OCTET STRING, snMspsDhcpClient6OptionRowStatus RowStatus } snMspsDhcpClient6OptionType OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifies the option, this is the tag octet of the DHCP option." ::= { snMspsDhcpClient6OptionEntry 1} snMspsDhcpClient6OptionLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the length of the option indicated by the option type. This length does not include the octets specifying the type and length. This object has read-write support only for some options(15,16,17)." ::= { snMspsDhcpClient6OptionEntry 2} snMspsDhcpClient6OptionValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the octets of data, of length specified by snMspsDhcpClient6OptionLength for that entry. This object has read-write support only for some options(15,16,17)." ::= { snMspsDhcpClient6OptionEntry 3} snMspsDhcpClient6OptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The RowStatus variable is for addition and deletion of snMspsDhcpClient6OptionEntry." ::= { snMspsDhcpClient6OptionEntry 4 } -- ****************************************************************** -- End of Client Option Table {snMspsDhcpClient6OptionTable) -- ****************************************************************** -- ****************************************************************** -- Start of Client Ia option Table {snMspsDhcpClient6IfIaOptTable) -- ****************************************************************** snMspsDhcpClient6IfIaOptTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpClient6IfIaOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the interface Ia option information got from server" ::= { snMspsDhcpClient6Config 3 } snMspsDhcpClient6IfIaOptEntry OBJECT-TYPE SYNTAX SnMspsDhcpClient6IfIaOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The client Ia Opt Table entry." INDEX { snMspsDhcpClient6IfIndex,snMspsDhcpClient6IfIaOptType} ::= { snMspsDhcpClient6IfIaOptTable 1 } SnMspsDhcpClient6IfIaOptEntry ::= SEQUENCE { snMspsDhcpClient6IfIaOptType Integer32, snMspsDhcpClient6IfIaOptIaid Integer32, snMspsDhcpClient6IfIaOptRenewTime Unsigned32, snMspsDhcpClient6IfIaOptRebindTime Unsigned32, snMspsDhcpClient6IfIaOptPrefixAddress OCTET STRING, snMspsDhcpClient6IfIaOptPrefixLen Integer32, snMspsDhcpClient6IfIaOptPreferedLifeTime Unsigned32, snMspsDhcpClient6IfIaOptValidLifeTime Unsigned32 } snMspsDhcpClient6IfIaOptType OBJECT-TYPE SYNTAX Integer32 (3..25) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Ia option info.this obj contains IANA(3) or IATA(4) or IAPD(25)" ::= { snMspsDhcpClient6IfIaOptEntry 1 } snMspsDhcpClient6IfIaOptIaid OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the Ia option of IAID value." ::= { snMspsDhcpClient6IfIaOptEntry 2 } snMspsDhcpClient6IfIaOptRenewTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This objects specifies the prefix/address renew time." ::= { snMspsDhcpClient6IfIaOptEntry 3 } snMspsDhcpClient6IfIaOptRebindTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This objects specifies the prefix/address rebind time." ::= { snMspsDhcpClient6IfIaOptEntry 4 } snMspsDhcpClient6IfIaOptPrefixAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the IPv6 Prefix or address from the DHCPv6 server." ::= { snMspsDhcpClient6IfIaOptEntry 5 } snMspsDhcpClient6IfIaOptPrefixLen OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the prefix or address (in bits)." ::= { snMspsDhcpClient6IfIaOptEntry 6 } snMspsDhcpClient6IfIaOptPreferedLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Prefix or address preferred lifetime in seconds." ::= { snMspsDhcpClient6IfIaOptEntry 7 } snMspsDhcpClient6IfIaOptValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Prefix or address valid lifetime in seconds." ::= { snMspsDhcpClient6IfIaOptEntry 8 } -- ****************************************************************** -- End of Client Ia option Table {snMspsDhcpClient6IfIaOptTable) -- ****************************************************************** -- ****************************************************************** -- Start of PD Sub Client Table {snMspsDhcpClient6PdSubClntIfTable) -- ****************************************************************** snMspsDhcpClient6PdSubClntIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpClient6PdSubClntIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the ipv6 address configuration information using PD client Prefix got from server" ::= { snMspsDhcpClient6Config 4 } snMspsDhcpClient6PdSubClntIfEntry OBJECT-TYPE SYNTAX SnMspsDhcpClient6PdSubClntIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PD sub client Table entry." INDEX { snMspsDhcpClient6PdSubClntIfIndex,snMspsDhcpClient6PdSubClntIfPrefixName, snMspsDhcpClient6PdSubClntIfPrefix, snMspsDhcpClient6PdSubClntIfPrefixLength} ::= { snMspsDhcpClient6PdSubClntIfTable 1 } SnMspsDhcpClient6PdSubClntIfEntry ::= SEQUENCE { snMspsDhcpClient6PdSubClntIfIndex Integer32, snMspsDhcpClient6PdSubClntIfPrefixName OCTET STRING, snMspsDhcpClient6PdSubClntIfPrefix OCTET STRING, snMspsDhcpClient6PdSubClntIfPrefixLength Integer32, snMspsDhcpClient6PdSubClntIfPrefixAddress OCTET STRING, snMspsDhcpClient6PdSubClntIfRowStatus RowStatus } snMspsDhcpClient6PdSubClntIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the interface to configure ipv6 address using PD client got prefix from server." ::= { snMspsDhcpClient6PdSubClntIfEntry 1 } snMspsDhcpClient6PdSubClntIfPrefixName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object indicates the IPv6 PD Prefix name assigned by user using snMspsDhcpClient6IfPrefixName object." ::= { snMspsDhcpClient6PdSubClntIfEntry 2 } snMspsDhcpClient6PdSubClntIfPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object indicates the IPv6 Prefix to configure address using snMspsDhcpClient6PdSubClntIfPrefixName.This is a binary string of up to 16 octets in network byte-order. example is ::1." ::= { snMspsDhcpClient6PdSubClntIfEntry 3 } snMspsDhcpClient6PdSubClntIfPrefixLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length of the prefix (in bits).and should be greater than snMspsDhcpClient6PrefixLength." ::= { snMspsDhcpClient6PdSubClntIfEntry 4 } snMspsDhcpClient6PdSubClntIfPrefixAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the IPv6 complete address configure to interface." ::= { snMspsDhcpClient6PdSubClntIfEntry 5 } snMspsDhcpClient6PdSubClntIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The RowStatus variable is for addition and deletion of snMspsDhcpClient6PdSubClntIfEntry." ::= { snMspsDhcpClient6PdSubClntIfEntry 6 } -- ****************************************************************** -- End of PD Sub Client Table {snMspsDhcpClient6PdSubClntIfTable) -- ****************************************************************** -- ****************************************************************** -- Start of Client Counters Table {snMspsDhcpClient6IfCounterTable) -- ****************************************************************** --- snMspsDhcpClient6Counters Group snMspsDhcpClient6IfCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpClient6IfCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains the statistics of DHCPv6 Client on each interface. It will give the no of messages sent and received at any time" ::= { snMspsDhcpClient6Counters 1 } snMspsDhcpClient6IfCounterEntry OBJECT-TYPE SYNTAX SnMspsDhcpClient6IfCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the dhcpClientCounterTable" INDEX {snMspsDhcpClient6IfIndex} ::= { snMspsDhcpClient6IfCounterTable 1 } SnMspsDhcpClient6IfCounterEntry ::= SEQUENCE { snMspsDhcpClient6IfSolicitSendCount Counter32, snMspsDhcpClient6IfAdvertiseRcvCount Counter32, snMspsDhcpClient6IfRequestSendCount Counter32, snMspsDhcpClient6IfConformSendCount Counter32, snMspsDhcpClient6IfRenewSendCount Counter32, snMspsDhcpClient6IfRebindSendCount Counter32, snMspsDhcpClient6IfReplyRcvCount Counter32, snMspsDhcpClient6IfReleaseSendCount Counter32, snMspsDhcpClient6IfDeclineSendCount Counter32, snMspsDhcpClient6IfReconfigureRcvCount Counter32, snMspsDhcpClient6IfInformSendCount Counter32, snMspsDhcpClient6IfInvalidPktRcvCount Counter32, snMspsDhcpClient6IfHmacFailCount Counter32, snMspsDhcpClient6IfCounterReset TruthValue } snMspsDhcpClient6IfSolicitSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Solicit packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 1 } snMspsDhcpClient6IfAdvertiseRcvCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of advertise packets received on the Interface." ::= { snMspsDhcpClient6IfCounterEntry 2 } snMspsDhcpClient6IfRequestSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 3 } snMspsDhcpClient6IfConformSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of conform packets transmitted from the Interface." ::= { snMspsDhcpClient6IfCounterEntry 4 } snMspsDhcpClient6IfRenewSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of renew packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 5 } snMspsDhcpClient6IfRebindSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rebind packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 6 } snMspsDhcpClient6IfReplyRcvCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reply packets received on the Interface." ::= { snMspsDhcpClient6IfCounterEntry 7 } snMspsDhcpClient6IfReleaseSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 8 } snMspsDhcpClient6IfDeclineSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of decline packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 9 } snMspsDhcpClient6IfReconfigureRcvCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reconfigure packets received on the Interface." ::= { snMspsDhcpClient6IfCounterEntry 10 } snMspsDhcpClient6IfInformSendCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of information packets transmitted from the interface." ::= { snMspsDhcpClient6IfCounterEntry 11 } snMspsDhcpClient6IfInvalidPktRcvCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Invalid packet received on the interface" ::= { snMspsDhcpClient6IfCounterEntry 12 } snMspsDhcpClient6IfHmacFailCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of unauthenticated messages received on the interface. This counter increment only when Authentication TLV is present in the received message and Digest calculated by the realm and key id does not match with received digest present in the Authentication TLV." ::= { snMspsDhcpClient6IfCounterEntry 13 } snMspsDhcpClient6IfCounterReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'.This column always reads back to 'false(2)'." ::= { snMspsDhcpClient6IfCounterEntry 14 } -- ****************************************************************** -- End of Client Counters Table {snMspsDhcpClient6IfCounterTable) -- ****************************************************************** -- ---------------------- -- snMspsDhcpRelay6.mib -- -- SIEMENS AG -- Industry Automation Division -- -- This file contains MIB definitions for DHCPv6 Relay module. -- -- Copyright (c) 2013 Siemens AG -- All rights reserved. -- ---------------------- snMspsDhcpRelay6Notify OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 0 } snMspsDhcpRelay6System OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 1 } snMspsDhcpRelay6Config OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 2 } snMspsDhcpRelay6Traps OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 3 } -- ****************************************************************** -- Start the Scalars defination -- ****************************************************************** snMspsDhcpRelay6DebugTrace OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object stores the trace option string input given by the user. Based on the input to this object, trace statements corresponding to the given options are displayed. To enable particular trace the user has to enter the corresponding string(given below) assigned for that. For enabling more than one traces the user has to enter the corresponding strings with SPACE (delimiter) between each string. For example, To enable the below traces: - Init and Shutdown traces - Management traces - Data path traces - Control plane traces - Packet Dump traces The input should be fed as follows: enable init-shut mgmt data ctrl pkt-dump To disable the below traces: - Init and Shutdown traces - Data path traces - Control plane traces The input should be,disable init-shut data ctrl The entered input string is parsed to get the trace options. enable - Enables the corresponding option. disable - Disables the corresponding option. init-shut - Init and Shutdown traces mgmt - Management traces ctrl - Control Plane traces pkt-dump - Packet Dump traces resource - Traces related to all resources except buffers all-fail - All Failure traces buffer - Buffer allocation/ release traces critical - Sl-DHCPv6 Relay Critical traces" DEFVAL { "critical" } ::= { snMspsDhcpRelay6System 1 } snMspsDhcpRelay6TrapAdminControl OBJECT-TYPE SYNTAX BITS{ none(0), trapInvalidPacketIn(1), trapMaxHopCount(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Object is used to enable or disable the transmission of TRAP notification messages. A vector of Boolean notification types, used to enable or disable the slDhcp6 notification types: trapInvalidPacketIn (1) trapMaxHopCount (2) when Relay agent declares the received message as invalid then the SNMP trap notification will come only when snMspsDhcpRelay6TrapAdminControl is set with value 0. when Relay agent receives the relay forward message with hop count value is less then one configured hop count then SNMP trap notification will come only when snMspsDhcpRelay6TrapAdminControl is set with value trapInvalidPacketIn." DEFVAL { 0 } ::= { snMspsDhcpRelay6System 2 } snMspsDhcpRelay6SysLogAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object is used to enable or disable the transmission of syslog notification messages. DHCPv6 relay will generate the syslog messages only when snMspsDhcpRelay6SysLogAdminStatus is set as enabled (1). disabled (2) means that DHCP server will not generate any syslog messages." DEFVAL { disabled } ::= { snMspsDhcpRelay6System 3 } snMspsDhcpRelay6ListenPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This Object is used to configure the port on which the DHCPv6 relay agent will listen on. This is in order to facilitate DHCPv6 relay to coexist with the DHCPv6 server which can listen on a different port." DEFVAL { 547 } ::= { snMspsDhcpRelay6System 4 } snMspsDhcpRelay6ClientTransmitPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This Object is used to configure the port on which the DHCPv6 relay agent will send reply messages." DEFVAL { 546 } ::= { snMspsDhcpRelay6System 5 } snMspsDhcpRelay6ServerTransmitPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This Object is used to configure the port on which the DHCPv6 relay agent will send relay-forward messages." DEFVAL { 547 } ::= { snMspsDhcpRelay6System 6 } snMspsDhcpRelay6Option37Control OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object is used to enable or disable the transmission of Remote-id option along with Relay-fwd message. DHCPv6 relay will insert remote-id with the relay-fwd message only when snMspsDhcpRelay6Option37Control is set as enabled (1). disabled (2) means that relay-fwd message will not be having remote-id option along with." DEFVAL { disabled } ::= { snMspsDhcpRelay6System 7 } -- ****************************************************************** -- Start of Relay Interface Table {snMspsDhcpRelay6IfTable) -- ****************************************************************** snMspsDhcpRelay6IfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpRelay6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the statistics of SL-DHCPv6 Relay on each interface. It will give the Number of Information Request, Relay Forward, Relay reply messages received on the interface and Number of Relay Reply, Relay Forward and Reply messages transmitted from the interface. This Table includes remote-id support to transmit remote-id value within the Relay-fwd message from the interface." ::= { snMspsDhcpRelay6Config 1 } snMspsDhcpRelay6IfEntry OBJECT-TYPE SYNTAX SnMspsDhcpRelay6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the snMspsDhcpRelay6IfTable" INDEX {snMspsDhcpRelay6IfIndex} ::= { snMspsDhcpRelay6IfTable 1 } SnMspsDhcpRelay6IfEntry ::= SEQUENCE { snMspsDhcpRelay6IfIndex Integer32, snMspsDhcpRelay6IfHopThreshold Integer32, snMspsDhcpRelay6IfInformIn Counter32, snMspsDhcpRelay6IfRelayForwIn Counter32, snMspsDhcpRelay6IfRelayReplyIn Counter32, snMspsDhcpRelay6IfInvalidPktIn Counter32, snMspsDhcpRelay6IfCounterRest TruthValue, snMspsDhcpRelay6IfRowStatus RowStatus, snMspsDhcpRelay6IfRemoteIdOption INTEGER, snMspsDhcpRelay6IfRemoteIdDUID OCTET STRING, snMspsDhcpRelay6IfRemoteIdOptionValue DisplayString, snMspsDhcpRelay6IfRemoteIdUserDefined DisplayString, snMspsDhcpRelay6IfRemoteIdSuffixOptions BITS } snMspsDhcpRelay6IfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the unique Interface Index value mapped to this Server Address Table.." ::= { snMspsDhcpRelay6IfEntry 1} snMspsDhcpRelay6IfHopThreshold OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "A maximum hop count, a relay agent allow to pass through it. If the HopCount in the DHCP Message is greater than the snMspsDhcpRelay6HopsThreshold packet get dropped at the Relay Agent " DEFVAL { 4 } ::= { snMspsDhcpRelay6IfEntry 3 } snMspsDhcpRelay6IfInformIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of INFORMATION REQUEST messages received on the Interface." ::= { snMspsDhcpRelay6IfEntry 4 } snMspsDhcpRelay6IfRelayForwIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of RELAY FORWARD messages received on the Interface." ::= { snMspsDhcpRelay6IfEntry 5 } snMspsDhcpRelay6IfRelayReplyIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of RELAY REPLY messages received on the Interface." ::= { snMspsDhcpRelay6IfEntry 6 } snMspsDhcpRelay6IfInvalidPktIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of Invalid messages received on the Interface." ::= { snMspsDhcpRelay6IfEntry 10 } snMspsDhcpRelay6IfCounterRest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'. This column always reads back to 'false(2)'." ::= { snMspsDhcpRelay6IfEntry 11 } snMspsDhcpRelay6IfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will also be deleted." ::= { snMspsDhcpRelay6IfEntry 12 } snMspsDhcpRelay6IfRemoteIdOption OBJECT-TYPE SYNTAX INTEGER { duid (1), switchName (2), mgmtIp (3), userDefined (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify which parameter has to be included as remote-id in the outgoing relay-fwd message. DUID (DHCP Unique Identifier) : If snMspsDhcpRelay6IfRemoteIdOption object is set as 1, then dhcp unique identifier will be sent with the relay forwarded message as remote-id. DUID can be configured by the use of snMspsDhcpRelay6IfRemote-IdDUID object. switchName : If snMspsDhcpRelay6IfRemoteIdOption object is set as 2, then current system name (switch name) will be included as remote-id. mgmtIp : If snMspsDhcpRelay6IfRemoteIdOption object is set as 3, then remote-id will be set as the management IP of the system. userDefined : If snMspsDhcpRelay6IfRemoteIdOption object is set as 4, then administrative configured ascii value will be sent with the relay forwarded message as remote-id. This snMspsDhcpRelay6IfRemoteIdUserDefined object can be used to configure the user specific ascii value. snMspsDhcpRelay6IfRemoteIdOption can be set only if snMspsDhcpRelay6Option37Control is set as enable.In case snMspsDhcpRelay6Option37Control is disable then snMspsDhcpRelay6IfRemoteIdOption will not be applicable." DEFVAL { switchName } ::= { snMspsDhcpRelay6IfEntry 13 } snMspsDhcpRelay6IfRemoteIdDUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define the appropriate DUID for DHCPv6 Relay Agent. Any communicating device (in dhcpv6 perspective) have a unique DHCPv6 identifier (DUID). According to the RFC 4649, DHCPv6 servers can use the DUID to make decisions about the information such as addresses, delegated prefixes, configuration parameters etc. that the client is to receive. Relay Agent uses the DUID to have a unique remote-id for its enterprise number, as sequence of enterprise number followed by remote-id must be globally unique. DHCPv6 Relay DUID is a user defined parameter so it can be set to any value within defined boundaries. DHCPv6 Relay DUID is a 100 octets long identifier, which can have Link-Layer Address as DUID octets or can have Link-Layer address along with some other parameter having variable octets or can have any sequence of octets representing unique DUID. This Object will be used only if value of snMspsDhcpRelay6IfRemoteIdOption object is set as DUID (1)." DEFVAL { ''h } ::= { snMspsDhcpRelay6IfEntry 14 } snMspsDhcpRelay6IfRemoteIdOptionValue OBJECT-TYPE SYNTAX DisplayString(SIZE(1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to get the current value of the remote-id option (specified by snMspsDhcpRelay6IfRemoteIdOption object ), which is being used as remote-id in dhcpv6 relay agent. This object is covering all the three options (system name, management ip, and duid value) although there is a specific object for duid parameter." ::= { snMspsDhcpRelay6IfEntry 15 } snMspsDhcpRelay6IfRemoteIdUserDefined OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the administrative specific unique ascii value for DHCPv6 Relay Agent. DHCPv6 servers can use this value to make decisions about the information such as addresses, delegated prefixes, configuration parameters etc, that the client is to receive. Relay Agent uses this unique ascii value to have a unique remote-id for its enterprise number, as sequence of enterprise number followed by remote-id must be globally unique. DHCPv6 Relay String is a user defined parameter so it can be set to any value within defined boundaries. DHCPv6 Relay ascii value is a 128 octets long identifier which can have any administrative configured ascii value representing the unique string. This Object will be used only if value of snMspsDhcpRelay6IfRemoteIdOption object is set as userDefined (4)." ::= { snMspsDhcpRelay6IfEntry 16 } snMspsDhcpRelay6IfRemoteIdSuffixOptions OBJECT-TYPE SYNTAX BITS { routerIndex(0), -- Router Interface Index vlanId(1), -- VlanId recvPort(2) -- Port or Lag port } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the type of information to be suffixed in remote-id option and according to snMspsDhcpRelay6IfRemoteIdOptions value. It is possible to set more than one bit at a time, currently first three bits are used and remaining bits are reserved for future purpose. DHCPv6 servers can use this value to make decisions about the information such as addresses, delegated prefixes, configuration parameters etc. that the client is to receive. Relay Agent uses this unique value to have a unique remote-id for its enterprise number, as sequence of enterprise number followed by remote-id must be globally unique. The default value for snMspsDhcpRelay6IfRemoteIdSuffixOptions object is empty set, which means no enumerated values are set." DEFVAL { 0 } ::= { snMspsDhcpRelay6IfEntry 17 } -- ****************************************************************** -- End of Relay Interface Table {snMspsDhcpRelay6IfTable) -- ****************************************************************** -- ****************************************************************** -- Start of Relay Server Address Table {snMspsDhcpRelay6SrvAddressTable) -- ****************************************************************** snMspsDhcpRelay6SrvAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpRelay6SrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client or other relay agent . This object becomes active only when snMspsDhcpRelay6ServersOnly is enabled." ::= { snMspsDhcpRelay6Config 2 } snMspsDhcpRelay6SrvAddressEntry OBJECT-TYPE SYNTAX SnMspsDhcpRelay6SrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Address table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute values which define the Address Table Entry" INDEX { snMspsDhcpRelay6InIfIndex, snMspsDhcpRelay6SrvAddress } ::= { snMspsDhcpRelay6SrvAddressTable 1 } SnMspsDhcpRelay6SrvAddressEntry ::= SEQUENCE { snMspsDhcpRelay6InIfIndex Integer32, snMspsDhcpRelay6SrvAddress OCTET STRING, snMspsDhcpRelay6SrvAddressRowStatus RowStatus } snMspsDhcpRelay6InIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the input Interface Index value mapped to this Server Address Table.." ::= { snMspsDhcpRelay6SrvAddressEntry 1} snMspsDhcpRelay6SrvAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object indicates the IP Address of the DHCP server." ::= { snMspsDhcpRelay6SrvAddressEntry 2 } snMspsDhcpRelay6SrvAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the status of the row " ::= { snMspsDhcpRelay6SrvAddressEntry 3 } -- ****************************************************************** -- End of Relay Server Address Table {snMspsDhcpRelay6SrvAddressTable) -- ****************************************************************** -- ****************************************************************** -- Start of Relay Output Interface Table {snMspsDhcpRelay6OutIfTable) -- ****************************************************************** snMspsDhcpRelay6OutIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDhcpRelay6OutIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains interface that specifies output interface for a destination. If this argument is configured, client messages are forwarded to the destination address through the link to which the output interface is connected." ::= { snMspsDhcpRelay6Config 3 } snMspsDhcpRelay6OutIfEntry OBJECT-TYPE SYNTAX SnMspsDhcpRelay6OutIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The output interface table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute values which define the output interface Table Entry" INDEX { snMspsDhcpRelay6InIfIndex, snMspsDhcpRelay6SrvAddress, snMspsDhcpRelay6OutIfIndex} ::= { snMspsDhcpRelay6OutIfTable 1 } SnMspsDhcpRelay6OutIfEntry ::= SEQUENCE { snMspsDhcpRelay6OutIfIndex Integer32, snMspsDhcpRelay6OutIfRowStatus RowStatus } snMspsDhcpRelay6OutIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the output Interface Index value mapped to this Server Address Table.." ::= { snMspsDhcpRelay6OutIfEntry 1} snMspsDhcpRelay6OutIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the status of the row " ::= { snMspsDhcpRelay6OutIfEntry 2 } -- ****************************************************************** -- End of Relay Server Interface Table {snMspsDhcpRelay6OutIfTable) -- ****************************************************************** -- ****************************************************************** -- TRAPS -- ****************************************************************** snMspsDhcpRelay6TrapIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the interface on which the trap is was triggered." ::= { snMspsDhcpRelay6Traps 1 } snMspsDhcpRelay6TrapInvalidMsgType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the type of invalid message received on a relay enabled interface." ::= { snMspsDhcpRelay6Traps 2 } -- ****************************************************************** -- NOTIFICATION-TYPES -- ****************************************************************** snMspsDhcpRelay6RlyInvalidPacketTrap NOTIFICATION-TYPE OBJECTS { snMspsDhcpRelay6TrapInvalidMsgType, snMspsDhcpRelay6TrapIfIndex } STATUS deprecated DESCRIPTION "This trap is generated when received Message is Invalid." ::= {snMspsDhcpRelay6Notify 1} snMspsDhcpRelay6RlyMaxHopCountTrap NOTIFICATION-TYPE OBJECTS { snMspsDhcpRelay6TrapIfIndex } STATUS deprecated DESCRIPTION "This trap is generated when relay agent is not able to add the relay header because the received hop count value is equal to the configured hop count value." ::= {snMspsDhcpRelay6Notify 2} -- ---------------------- -- snMspsDNSClient.mib -- -- SIEMENS AG -- Industry Automation Division -- -- object definitions for the management of the DNS client (resolver) side of -- the Domain Name System (DNS) protocol. -- -- Copyright (c) 2013 Siemens AG -- All rights reserved. -- ---------------------- snMspsDNSClientObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group extend the Management Information Base for DNS clients (resolvers) as defined by the DNS-RESOLVER-MIB. In certain agent implementations, this MIB may also be used in a stand-alone manner." ::= { snMspsDNSClient 1 } snMspsDNSClientConfig OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base objects with systemic scope." ::= { snMspsDNSClientObjects 1 } snMspsDNSClientActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. The global DNS client enable/disable flag." ::= { snMspsDNSClientConfig 1 } snMspsDNSClientManualOverride OBJECT-TYPE SYNTAX INTEGER { public(1), manual(2), all(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by the remote management entity. -public: only the public name servers in order given by provider are written in /etc/resolv.conf -manual: only the manual name servers given by user are written in /etc/resolv.conf -all: manual as well as public name servers are written in /etc/resolv.conf in order from manual to public." DEFVAL { public } ::= { snMspsDNSClientConfig 2 } snMspsDNSNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDNSNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDNSClientObjects 2 } snMspsDNSNameServerEntry OBJECT-TYPE SYNTAX SnMspsDNSNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDNSNameServerIndex } ::= { snMspsDNSNameServerTable 1 } SnMspsDNSNameServerEntry ::= SEQUENCE { snMspsDNSNameServerIndex Unsigned32, snMspsDNSNameServerAddressType InetAddressType, snMspsDNSNameServerAddress InetAddress, snMspsDNSNameServerRowStatus RowStatus } snMspsDNSNameServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An auxiliary index." ::= { snMspsDNSNameServerEntry 1 } snMspsDNSNameServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The IP version of the address." ::= { snMspsDNSNameServerEntry 2 } snMspsDNSNameServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address." ::= { snMspsDNSNameServerEntry 3 } snMspsDNSNameServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { snMspsDNSNameServerEntry 9 } snMspsDNSOperNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDNSOperNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsDNSClientObjects 3 } snMspsDNSOperNameServerEntry OBJECT-TYPE SYNTAX SnMspsDNSOperNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsDNSOperNameServerIndex } ::= { snMspsDNSOperNameServerTable 1 } SnMspsDNSOperNameServerEntry ::= SEQUENCE { snMspsDNSOperNameServerIndex Unsigned32, snMspsDNSOperNameServerAddressType InetAddressType, snMspsDNSOperNameServerAddress InetAddress, snMspsDNSOperNameServerOrigin INTEGER } snMspsDNSOperNameServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An auxiliary index." ::= { snMspsDNSOperNameServerEntry 1 } snMspsDNSOperNameServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP version of the address." ::= { snMspsDNSOperNameServerEntry 2 } snMspsDNSOperNameServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address." ::= { snMspsDNSOperNameServerEntry 3 } snMspsDNSOperNameServerOrigin OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcp(2), ipcp(3), ipv6-rtr-advt(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configured; - learned from dhcp; - learned from ipcp. - learned from ipv6 router advertisement packet." ::= { snMspsDNSOperNameServerEntry 4 } -- This table is for configuring the Domain Name List snMspsDNSDomainNameTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDNSDomainNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the Domain Name List" ::= { snMspsDNSClientObjects 8 } snMspsDNSDomainNameEntry OBJECT-TYPE SYNTAX SnMspsDNSDomainNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Domain Name List Entries " INDEX { snMspsDNSDomainNameIndex } ::= { snMspsDNSDomainNameTable 1 } SnMspsDNSDomainNameEntry ::= SEQUENCE { snMspsDNSDomainNameIndex Unsigned32, snMspsDNSDomainName DisplayString, snMspsDNSDomainNameOrigin INTEGER, snMspsDNSDomainNameRowStatus RowStatus } snMspsDNSDomainNameIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " An arbitrary integer value, greater than zero, which uniquely identifies a Domain Name" ::= { snMspsDNSDomainNameEntry 1 } snMspsDNSDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..250)) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of object that represents the Domain Name" ::= { snMspsDNSDomainNameEntry 2 } snMspsDNSDomainNameOrigin OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcp(2), ipv6-rtr-advt(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configured; - learned from dhcp; - learned from ipv6 router advertisement packet." ::= { snMspsDNSDomainNameEntry 3 } snMspsDNSDomainNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Row Status of the Domain Name" ::= { snMspsDNSDomainNameEntry 100 } -- ---------------------------------------------------------------- -- MSPS COS Mapping Group Objects -- ---------------------------------------------------------------- -- -------------------------------------------------------------- -- QoS COS Mapping Sub-Group -- -------------------------------------------------------------- snMspsCosMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsCosMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "COS to queue mapping table." ::= { snMspsQosCos 1 } snMspsCosMappingEntry OBJECT-TYPE SYNTAX SnMspsCosMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "COS to queue mapping table rows entries." INDEX { snMspsCosMappingIndex } ::= { snMspsCosMappingTable 1 } SnMspsCosMappingEntry ::= SEQUENCE { snMspsCosMappingIndex INTEGER, snMspsCosMappingQueue INTEGER } snMspsCosMappingIndex OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the values of the Vlan Priority field within the incoming packet. Index is not zero based." ::= { snMspsCosMappingEntry 1 } snMspsCosMappingQueue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the queue to which packets with the specific Vlan priority values are assigned, where zero is the lowest queue priority." ::= { snMspsCosMappingEntry 2 } -- ---------------------------------------------------------------- -- MSPS DSCP Mapping Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: DSCP Mapping MIB -- ---------------------------------------------------------------- snMspsDscpMappingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables DSCP (DiffServ Code Point) to queues mapping." ::= { snMspsQosDscp 1 } -- -------------------------------------------------------------- -- QoS DSCP Mapping Sub-Group -- -------------------------------------------------------------- snMspsDscpMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDscpMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSCP to queue mapping table." ::= { snMspsQosDscp 2 } snMspsDscpMappingEntry OBJECT-TYPE SYNTAX SnMspsDscpMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSCP to queue mapping table rows entries." INDEX { snMspsDscpMappingIndex } ::= { snMspsDscpMappingTable 1 } SnMspsDscpMappingEntry ::= SEQUENCE { snMspsDscpMappingIndex INTEGER, snMspsDscpMappingQueue INTEGER } snMspsDscpMappingIndex OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the values of the DSCP (DiffServ Code Point) field within the incoming packet. Index is not zero based." ::= { snMspsDscpMappingEntry 1 } snMspsDscpMappingQueue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the queue to which packets with the specific DSCP value are assigned, where zero is the lowest queue priority." ::= { snMspsDscpMappingEntry 2 } snMspsACLControl OBJECT-TYPE SYNTAX INTEGER { no-operation(1), start-learning(2), stop-learning(3), clear-static(4), learning-in-progress(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control Object for ACL Learning." ::= { snMspsAcl 1 } -- snMspsAcl 2-3 reserved -- ------------------------------------------------------------------ -- L2 Filter Group -------------------------------------------------- -- ------------------------------------------------------------------ snMspsAclL2FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsAclL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure L2 filter rules in the system." ::= { snMspsAcl 4 } snMspsAclL2FilterEntry OBJECT-TYPE SYNTAX SnMspsAclL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number." INDEX { snMspsAclL2FilterNo} ::= { snMspsAclL2FilterTable 1 } SnMspsAclL2FilterEntry ::= SEQUENCE { snMspsAclL2FilterNo Integer32, snMspsAclL2FilterPriority Integer32, snMspsAclL2FilterEtherType Integer32, snMspsAclL2FilterProtocolType Unsigned32, snMspsAclL2FilterDstMacAddr MacAddress, snMspsAclL2FilterSrcMacAddr MacAddress, snMspsAclL2FilterVlanId Integer32, snMspsAclL2FilterInPortList PortList, snMspsAclL2FilterAction INTEGER, snMspsAclL2FilterMatchCount Counter32, snMspsAclL2FilterStatus RowStatus, snMspsAclL2FilterOutPortList PortList, snMspsAclL2FilterDirection INTEGER } snMspsAclL2FilterNo OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2 Filter rule number." ::= { snMspsAclL2FilterEntry 1 } snMspsAclL2FilterPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the L2 filter can be used to decide which filter rule is applicable when --> the packet matches with more than one filter rules --> All the filter rules result in 'allow'ing the packet Higher value of 'filter priority' implies a higher priority. Usage of 'L2FilterPriority' is implementation dependant." DEFVAL { 1 } ::= { snMspsAclL2FilterEntry 2 } snMspsAclL2FilterEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with the default value, frames are not matched for the value in the Type/Len field with the value set for this object." DEFVAL { 0 } ::= { snMspsAclL2FilterEntry 3 } snMspsAclL2FilterProtocolType OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump | msdos | mumps | netbios | vines-echo | vines-ip | xns-idp: A non-IP protocol. A value of '0' means, the filter is applicable for all protocols." DEFVAL { 0 } ::= { snMspsAclL2FilterEntry 4 } snMspsAclL2FilterDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Address ." ::= { snMspsAclL2FilterEntry 5 } snMspsAclL2FilterSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address" ::= { snMspsAclL2FilterEntry 6 } snMspsAclL2FilterVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring this value is not allowed." DEFVAL { 0 } ::= { snMspsAclL2FilterEntry 7 } snMspsAclL2FilterInPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is applicable for the incoming packets on all ports. Even though the snMspsAclL2FilterInPortList is configured, It is applicable only if snMspsAclL2FilterDirection is configured as 'in'. By default inport list is maintained as '0'." ::= { snMspsAclL2FilterEntry 8 } snMspsAclL2FilterAction OBJECT-TYPE SYNTAX INTEGER { allow (1), drop (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded." DEFVAL { allow } ::= { snMspsAclL2FilterEntry 9 } snMspsAclL2FilterMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this filter is matched." ::= { snMspsAclL2FilterEntry 10 } snMspsAclL2FilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { snMspsAclL2FilterEntry 11 } snMspsAclL2FilterOutPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is applicable for the outgoing packets on all ports. Even though the snMspsAclL2FilterOutPortList is configured, It is applicable only if snMspsAclL2FilterDirection is configured as 'out'. By default outport list is maintained as '0'." ::= { snMspsAclL2FilterEntry 12 } snMspsAclL2FilterDirection OBJECT-TYPE SYNTAX INTEGER { in (1), out (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on specified ports of the snMspsAclL2FilterInPortList. When the direction of this filter is 'out', It is applied on specified ports of the snMspsAclL2FilterOutPortList." DEFVAL { in } ::= { snMspsAclL2FilterEntry 13 } -- ------------------------------------------------------------------ -- L3 Filter Group -------------------------------------------------- -- ------------------------------------------------------------------ snMspsAclL3FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsAclL3FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table to configure L3 filter rules in the system. " ::= { snMspsAcl 5 } snMspsAclL3FilterEntry OBJECT-TYPE SYNTAX SnMspsAclL3FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry in this table is a L3 filter rule. Index to the table is L3 filter number. " INDEX { snMspsAclL3FilterNo} ::= { snMspsAclL3FilterTable 1 } SnMspsAclL3FilterEntry ::= SEQUENCE { snMspsAclL3FilterNo Integer32, snMspsAclL3FilterPriority Integer32, snMspsAclL3FilterProtocol Integer32, snMspsAclL3FilterMessageType Integer32, snMspsAclL3FilterMessageCode Integer32, snMspsAclL3FilteAddrType InetAddressType, snMspsAclL3FilterDstIpAddr InetAddress, snMspsAclL3FilterSrcIpAddr InetAddress, snMspsAclL3FilterDstIpAddrPrefixLength InetAddressPrefixLength, snMspsAclL3FilterSrcIpAddrPrefixLength InetAddressPrefixLength, snMspsAclL3FilterMinDstProtPort Unsigned32, snMspsAclL3FilterMaxDstProtPort Unsigned32, snMspsAclL3FilterMinSrcProtPort Unsigned32, snMspsAclL3FilterMaxSrcProtPort Unsigned32, snMspsAclL3FilterInPortList PortList, snMspsAclL3FilterOutPortList PortList, snMspsAclL3FilterAckBit INTEGER, snMspsAclL3FilterRstBit INTEGER, snMspsAclL3FilterTos Integer32, snMspsAclL3FilterDscp Integer32, snMspsAclL3FilterDirection INTEGER, snMspsAclL3FilterAction INTEGER, snMspsAclL3FilterMatchCount Counter32, snMspsAclL3FilterFlowId Unsigned32, snMspsAclL3FilterStatus RowStatus } snMspsAclL3FilterNo OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "L3 Filter rule number." ::= { snMspsAclL3FilterEntry 1 } snMspsAclL3FilterPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the filter can be used to decide which filter rule is applicable when --> the packet matches with more than one filter rules --> All the filter rules result in 'allow'ing the packet Higher value of 'L3 filter priority' implies a higher priority. Usage of 'L3FilterPriority' is implementation dependant." DEFVAL { 1 } ::= { snMspsAclL3FilterEntry 2 } snMspsAclL3FilterProtocol OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it will not be checked to decide the action. " DEFVAL { 255 } ::= { snMspsAclL3FilterEntry 3 } snMspsAclL3FilterMessageType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in snMspsAclL3FilterAction. The default value is 255. It means that message type is not configured and need not be checked. Generally the value zero is given as default. But here zero can be an ICMP Type value. Hence 255 is given as the default value. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18), noICMPType(255) " DEFVAL { 255 } ::= { snMspsAclL3FilterEntry 4 } snMspsAclL3FilterMessageCode OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in snMspsAclL3FilterAction. The default value is 255. It means that message code is not configured and need not be checked. Generally the value zero will be given as default. But here, zero can be an ICMP Code value. Hence 255 is given as the default value. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12), noICMPCode(255) " DEFVAL { 255 } ::= { snMspsAclL3FilterEntry 5 } snMspsAclL3FilteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses." ::= { snMspsAclL3FilterEntry 6 } snMspsAclL3FilterDstIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterDstIpAddrPrefixLength indicates the number of bits that are relevant." ::= { snMspsAclL3FilterEntry 7 } snMspsAclL3FilterSrcIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterSrcIpAddrPrefixLength indicates the number of bits that are relevant." ::= { snMspsAclL3FilterEntry 8 } snMspsAclL3FilterDstIpAddrPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the CIDR Prefix carried in snMspsAclL3FilterDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128." DEFVAL { 0 } ::= { snMspsAclL3FilterEntry 9 } snMspsAclL3FilterSrcIpAddrPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the CIDR Prefix carried in snMspsAclL3FilterSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128." DEFVAL { 0 } ::= { snMspsAclL3FilterEntry 10 } snMspsAclL3FilterMinDstProtPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum port in the destination port range. Please note these ports are the TCP / UDP ports." DEFVAL { 0 } ::= { snMspsAclL3FilterEntry 11 } snMspsAclL3FilterMaxDstProtPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum port in the destination port range. Please note these ports are the TCP / UDP ports." DEFVAL { 65535 } ::= { snMspsAclL3FilterEntry 12 } snMspsAclL3FilterMinSrcProtPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum port in the source port range. Please note these ports are the TCP / UDP ports." DEFVAL { 0 } ::= { snMspsAclL3FilterEntry 13 } snMspsAclL3FilterMaxSrcProtPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum port in the source port range. Please note these ports are the TCP / UDP ports." DEFVAL { 65535 } ::= { snMspsAclL3FilterEntry 14 } snMspsAclL3FilterInPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable. If the incoming port list is '0', the filter rule is applicable for all the incoming ports. By default inport list is maintained as '0'." ::= { snMspsAclL3FilterEntry 15 } snMspsAclL3FilterOutPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the complete set of ports over which if the packet goes out, this filter rule will be applicable. If the outgoing port list is '0', the filter rule is applicable for all the outgoing packets in all ports. By default outport list is maintained as '0'." ::= { snMspsAclL3FilterEntry 16 } snMspsAclL3FilterAckBit OBJECT-TYPE SYNTAX INTEGER { establish(1), notEstablish(2), any(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " The TCP ACK bit to be checked against the packet. The default value is 'any'(3). It means that ACK bit will not be checked to decide the action. " DEFVAL { any } ::= { snMspsAclL3FilterEntry 17 } snMspsAclL3FilterRstBit OBJECT-TYPE SYNTAX INTEGER { set(1), notSet(2), any(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " The TCP RST bit to be checked against the packet. The default value is 'any'(3). It means that RST bit will not be checked to decide the action. " DEFVAL { any } ::= { snMspsAclL3FilterEntry 18 } snMspsAclL3FilterTos OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION " The IP TOS bit to be checked against the packet. This is a single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput and Reliability i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability. For example '6' indicates low delay and high throughput. A value of '-1' means, the Tos Field becomes dont care" DEFVAL { -1 } ::= { snMspsAclL3FilterEntry 19 } snMspsAclL3FilterDscp OBJECT-TYPE SYNTAX Integer32 (-1..63) MAX-ACCESS read-create STATUS current DESCRIPTION " The IP Dscp value to be checked against the packet. A value of '-1' means, the Dscp Field becomes dont care." DEFVAL { -1 } ::= { snMspsAclL3FilterEntry 20 } snMspsAclL3FilterDirection OBJECT-TYPE SYNTAX INTEGER { in (1), out(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on specified ports of the snMspsAclL3FilterInPortList. When the direction of this filter is 'out', It is applied on specified ports of the snMspsAclL3FilterOutPortList." DEFVAL { in } ::= { snMspsAclL3FilterEntry 21 } snMspsAclL3FilterAction OBJECT-TYPE SYNTAX INTEGER { allow (1), drop (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. If the out port list is '0', the port over which the packet is to be switched will be decided based on further processing on the packet. If the action is 'drop', the packet will be discarded." DEFVAL { allow } ::= { snMspsAclL3FilterEntry 22 } snMspsAclL3FilterMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this filter is matched." ::= { snMspsAclL3FilterEntry 23 } snMspsAclL3FilterFlowId OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The flow identifier in an IPv6 header." ::= { snMspsAclL3FilterEntry 24 } snMspsAclL3FilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { snMspsAclL3FilterEntry 25 } -- ------------------------------------------------------------------ -- ACL RULE Precedence Table----------------------------------------- -- ------------------------------------------------------------------ snMspsAclPreOrder OBJECT IDENTIFIER ::= { snMspsAcl 8 } snMspsAclPreOrderTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsAclPreOrderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ACL Rule Order Precedence information interface entries." ::= { snMspsAclPreOrder 1 } snMspsAclPreOrderEntry OBJECT-TYPE SYNTAX SnMspsAclPreOrderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing ACL Rule Order Precedence to a particular interface." INDEX { snMspsAclPreOrderIfIndex } ::= { snMspsAclPreOrderTable 1 } SnMspsAclPreOrderEntry ::= SEQUENCE { snMspsAclPreOrderIfIndex InterfaceIndex, snMspsAclPreOrderMACInFilterList OCTET STRING, snMspsAclPreOrderMACOutFilterList OCTET STRING, snMspsAclPreOrderIPInFilterList OCTET STRING, snMspsAclPreOrderIPOutFilterList OCTET STRING } snMspsAclPreOrderIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, of the interface." ::= { snMspsAclPreOrderEntry 1 } snMspsAclPreOrderMACInFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of MAC in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zero means no filter configured for this interface on this type of filters." ::= { snMspsAclPreOrderEntry 2 } snMspsAclPreOrderMACOutFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of MAC out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zero means no filter configured for this interface on this type of filters." ::= { snMspsAclPreOrderEntry 3 } snMspsAclPreOrderIPInFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of IP in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zero means no filter configured for this interface on this type of filters." ::= { snMspsAclPreOrderEntry 4 } snMspsAclPreOrderIPOutFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of IP out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zero means no filter configured for this interface on this type of filters." ::= { snMspsAclPreOrderEntry 5 } -- ---------------------------------------------------------- -- -- Textual Conventions -- ---------------------------------------------------------- -- AuthenticMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Authentication method is using Remote Authentication Server or Local Authentication Server." SYNTAX INTEGER { remoteServer(1), localServer(2) } RemoteAuthServerType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This indicates which Remote Server is to provide the authentication. Currently supported servers are RADIUS Server and Terminal Access Controller Access-Control System Plus (TACACS+) Server." SYNTAX INTEGER { radiusServer(1), tacacsplusServer(2) } PermissionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The permission values." SYNTAX INTEGER { allow(1), deny(2) } snMspsPnacAuthReAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure ReAuthentication on all the ports. Setting this object will inturn set enable/disable control used by the Reauthentication Timer state machine (8.5.5.1) for all the ports. (Sets Port specific dot1xAuthReAuthEnabled from the standard pnac MIB)." ::= { snMspsPnac 1 } snMspsPnacAuthenticServer OBJECT-TYPE SYNTAX AuthenticMethod MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure for the choice of local or remote Authentication Server to be used by the Authenticator for its authentication services." ::= { snMspsPnac 2 } snMspsPnacNasId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the Network Access Server Identifier to be presented before the remote Authentication Server." ::= { snMspsPnac 3 } -- snMspsPnac 4-6 reserved snMspsPnacRemoteAuthServerType OBJECT-TYPE SYNTAX RemoteAuthServerType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used by the Authenticator for its authentication services, to configure the choice of RADIUS or TACACS+ remote authentication servers when the authentication method is through a remote server, that is, this object can be configured only if snMspsPnacAuthenticServer is set to remoteServer." DEFVAL { 1 } ::= { snMspsPnac 7 } -- snMspsPnac 8-9 reserved -- Authenticator Session Table snMspsPnacAuthSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPnacAuthSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains authentication session information associated with each Supplicant while Authenticator operates in MAC based authentication mode." ::= { snMspsPnac 10 } snMspsPnacAuthSessionEntry OBJECT-TYPE SYNTAX SnMspsPnacAuthSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Supplicant's MAC address and session ID, states of Authenticator state machine and Backend state machine for the session." INDEX { snMspsPnacAuthSessionSuppAddress } ::= { snMspsPnacAuthSessionTable 1 } SnMspsPnacAuthSessionEntry ::= SEQUENCE { snMspsPnacAuthSessionSuppAddress MacAddress, snMspsPnacAuthSessionIdentifier Integer32, snMspsPnacAuthSessionAuthPaeState INTEGER, snMspsPnacAuthSessionBackendAuthState INTEGER, snMspsPnacAuthSessionPortStatus INTEGER, snMspsPnacAuthSessionPortNumber InterfaceIndex, snMspsPnacAuthSessionInitialize TruthValue, snMspsPnacAuthSessionReauthenticate TruthValue } snMspsPnacAuthSessionSuppAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the supplicant for this session." ::= { snMspsPnacAuthSessionEntry 1 } snMspsPnacAuthSessionIdentifier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session identifier of the supplicant for this session." ::= { snMspsPnacAuthSessionEntry 2 } snMspsPnacAuthSessionAuthPaeState OBJECT-TYPE SYNTAX INTEGER { initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authenticator state machine's state for this session." ::= { snMspsPnacAuthSessionEntry 3 } snMspsPnacAuthSessionBackendAuthState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Backend state machine's state for this session." ::= { snMspsPnacAuthSessionEntry 4 } snMspsPnacAuthSessionPortStatus OBJECT-TYPE SYNTAX PaeControlledPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the controlled Port status parameter for this session." ::= { snMspsPnacAuthSessionEntry 5 } snMspsPnacAuthSessionPortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Port in which this session is proceeding." ::= { snMspsPnacAuthSessionEntry 6 } snMspsPnacAuthSessionInitialize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The initialization control for this Supplicant MAC address. Setting this attribute TRUE causes the Supplicant session with this MAC address, to be initialized. The attribute value reverts to FALSE once initialization has completed." ::= { snMspsPnacAuthSessionEntry 7 } snMspsPnacAuthSessionReauthenticate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The reauthentication control for this Supplicant MAC address. Setting this attribute TRUE causes the Authenticator PAE state machine for this MAC address to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read." ::= { snMspsPnacAuthSessionEntry 8 } -- PNAC Local Authentication Server User Configuration Table snMspsPnacASUserConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPnacASUserConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains authentication related User configuration information maintained by PNAC local Authentication Server." ::= { snMspsPnac 11 } snMspsPnacASUserConfigEntry OBJECT-TYPE SYNTAX SnMspsPnacASUserConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains User name, Password, Authentication protocol used, Authenticated session timeout and Access ports list of the User seeking authentication." INDEX { snMspsPnacASUserConfigUserName } ::= { snMspsPnacASUserConfigTable 1 } SnMspsPnacASUserConfigEntry ::= SEQUENCE { snMspsPnacASUserConfigUserName OCTET STRING, snMspsPnacASUserConfigPassword DisplayString, snMspsPnacASUserConfigAuthProtocol Unsigned32, snMspsPnacASUserConfigAuthTimeout Unsigned32, snMspsPnacASUserConfigPortList PortList, snMspsPnacASUserConfigPermission PermissionType, snMspsPnacASUserConfigRowStatus RowStatus } snMspsPnacASUserConfigUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..115)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the User seeking authentication. A string of not more than 20 printable characters." ::= { snMspsPnacASUserConfigEntry 1 } snMspsPnacASUserConfigPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The secret Password of the User. A string of not more than 20 printable characters. When read, this always returns a String of length zero." ::= { snMspsPnacASUserConfigEntry 2 } snMspsPnacASUserConfigAuthProtocol OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Authentication protocol supported for the User." ::= { snMspsPnacASUserConfigEntry 3 } snMspsPnacASUserConfigAuthTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the Authentication offerred to the User ceases. Maximum value of the object can be 7200 seconds. When the object value is 0, the ReAuthPeriod of the Authenticator port is used by Authenticator." ::= { snMspsPnacASUserConfigEntry 4 } snMspsPnacASUserConfigPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The complete set of ports of Authenticator to which the User is allowed or denied access, on the basis of setting of 'snMspsPnacASUserConfigPermission' object." ::= { snMspsPnacASUserConfigEntry 5 } snMspsPnacASUserConfigPermission OBJECT-TYPE SYNTAX PermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "For the set of ports indicated by 'snMspsPnacASUserConfigPortList' object, the User is allowed access when this object is set 'allow' and is denied access when this object is set 'deny'." ::= { snMspsPnacASUserConfigEntry 6 } snMspsPnacASUserConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The Row status of this entry." ::= { snMspsPnacASUserConfigEntry 7 } -- Pae Port Table extensions snMspsPnacPaePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPnacPaePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of system level information for each port supported by the device PNAC. An entry appears in this table for each port of this system. This table is an extension of dot1xPaePortTable of IEEE 802.1x MIB." ::= { snMspsPnac 12 } snMspsPnacPaePortEntry OBJECT-TYPE SYNTAX SnMspsPnacPaePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration as port based or MAC based authentication and Supplicant count on a port. Index to this table is same as that of the dot1xPaePortTable, which is the InterfaceIndex." INDEX { snMspsPnacPaePortNumber } ::= { snMspsPnacPaePortTable 1 } SnMspsPnacPaePortEntry ::= SEQUENCE { snMspsPnacPaePortNumber InterfaceIndex, snMspsPnacPaePortAuthMode INTEGER, snMspsPnacPaePortSupplicantCount Counter32, snMspsPnacPaePortUserName DisplayString, snMspsPnacPaePortPassword DisplayString, snMspsPnacPaePortStatus INTEGER, snMspsPnacPaePortReAuthEnabled TruthValue } snMspsPnacPaePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number associated with this port." ::= { snMspsPnacPaePortEntry 1 } snMspsPnacPaePortAuthMode OBJECT-TYPE SYNTAX INTEGER { portBased(1), macBased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of the port, for Port Based Authentication or MAC Based Authentication." ::= { snMspsPnacPaePortEntry 2 } snMspsPnacPaePortSupplicantCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Supplicants connected in the port." ::= { snMspsPnacPaePortEntry 3 } snMspsPnacPaePortUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(4..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name to be used in this port, while operating as a Supplicant." ::= { snMspsPnacPaePortEntry 4 } snMspsPnacPaePortPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(4..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password to be used in this port, while operating as a Supplicant." ::= { snMspsPnacPaePortEntry 5 } snMspsPnacPaePortStatus OBJECT-TYPE SYNTAX PaeControlledPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the combined Port status." ::= { snMspsPnacPaePortEntry 6 } snMspsPnacPaePortReAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1)." REFERENCE "9.4.1, reAuthEnabled" DEFVAL { false } ::= { snMspsPnacPaePortEntry 7 } -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapPnacPortAuthStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Pnac port auth state change notification." ::= { snMspsTrapPrefix 451 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- -- snMspsRadiusServer 1 reserved snMspsRadExtMaxNoOfUserEntries OBJECT-TYPE SYNTAX Integer32 (1 ..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum of No of User entries stored. The value of this object will be stored for the MemPool Initialization." ::= { snMspsRadiusServer 2 } snMspsRadExtPrimaryServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type of active server.This can be Ipv4 or Ipv6." ::= { snMspsRadiusServer 3 } snMspsRadExtPrimaryServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured in snMspsRadExtServerEntry. This object indicates the primary server among those 5 servers. The RADIUS client will first try to interact with the server mentioned in this object. Other servers are approached only if this server is not reachable. Setting this object to zero disables the primary server concept." ::= { snMspsRadiusServer 4 } snMspsRadExtServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRadExtServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table that lists the RADIUS servers with which the client shares a secret." ::= { snMspsRadiusServer 5 } snMspsRadExtServerEntry OBJECT-TYPE SYNTAX SnMspsRadExtServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS server with which the client shares a secret." INDEX {snMspsRadExtServerIndex} ::= { snMspsRadExtServerTable 1 } SnMspsRadExtServerEntry ::= SEQUENCE { snMspsRadExtServerIndex Integer32, snMspsRadExtServerAddrType InetAddressType, snMspsRadExtServerAddress InetAddress, snMspsRadExtServerType INTEGER, snMspsRadExtServerSharedSecret OCTET STRING, snMspsRadExtServerEnabled INTEGER, snMspsRadExtServerResponseTime Integer32, snMspsRadExtServerMaximumRetransmission Integer32, snMspsRadExtServerEntryStatus RowStatus } snMspsRadExtServerIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object enumerates the order in which the server should be contacted.Index 1 is contacted first if the primary server specified by snMspsRadExtPrimaryServer is not configured" ::= { snMspsRadExtServerEntry 1 } snMspsRadExtServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address to be configured for the RADIUS server. While other types of addresses are defined in the InetAddressType textual convention, like DNS names, this object is limited to IPv4 and IPv6 addresses." ::= { snMspsRadExtServerEntry 2 } snMspsRadExtServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address(Ipv4 or Ipv6) of the RADIUS server referred to in snMspsRadExtServerTable entry." ::= { snMspsRadExtServerEntry 3 } snMspsRadExtServerType OBJECT-TYPE SYNTAX INTEGER { auth (1), acct (2), both (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The RADIUS server type (Authentication or Accounting or Both). For creating a server entry, the Server Type should be set" ::= { snMspsRadExtServerEntry 4 } snMspsRadExtServerSharedSecret OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The secret string which is shared between the Server and the Client" ::= { snMspsRadExtServerEntry 5 } snMspsRadExtServerEnabled OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), destroy (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object informs whether the server is active or inactive" DEFVAL { enabled } ::= { snMspsRadExtServerEntry 6 } snMspsRadExtServerResponseTime OBJECT-TYPE SYNTAX Integer32 (1 ..120) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time within which the server has to respond for a request from the client." ::= { snMspsRadExtServerEntry 7 } snMspsRadExtServerMaximumRetransmission OBJECT-TYPE SYNTAX Integer32 (1 ..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The allowed maximum number of trials to be tried by a client to get the response from the server for a request" ::= { snMspsRadExtServerEntry 8 } snMspsRadExtServerEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the entry can be used as specified in the SNMP V2 standard. " ::= { snMspsRadExtServerEntry 9 } snMspsRadExtAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRadExtAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table taht lists the RADIUS authentication servers with which the client shares a secret." ::= { snMspsRadiusServer 6 } snMspsRadExtAuthServerEntry OBJECT-TYPE SYNTAX SnMspsRadExtAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) that represents a RADIUS authentication server with which the client shares a secret." INDEX { snMspsRadExtAuthServerIndex } ::= { snMspsRadExtAuthServerTable 1 } SnMspsRadExtAuthServerEntry ::= SEQUENCE { snMspsRadExtAuthServerIndex Integer32, snMspsRadExtAuthServerAddressType InetAddressType, snMspsRadExtAuthServerAddress InetAddress, snMspsRadExtAuthClientServerPortNumber Integer32, snMspsRadExtAuthClientRoundTripTime TimeTicks, snMspsRadExtAuthClientAccessRequests Counter32, snMspsRadExtAuthClientAccessRetransmissions Counter32, snMspsRadExtAuthClientAccessAccepts Counter32, snMspsRadExtAuthClientAccessRejects Counter32, snMspsRadExtAuthClientAccessChallenges Counter32, snMspsRadExtAuthClientMalformedAccessResponses Counter32, snMspsRadExtAuthClientBadAuthenticators Counter32, snMspsRadExtAuthClientPendingRequests Gauge32, snMspsRadExtAuthClientTimeouts Counter32, snMspsRadExtAuthClientUnknownTypes Counter32, snMspsRadExtAuthClientPacketsDropped Counter32, snMspsRadExtAuthServerType INTEGER } snMspsRadExtAuthServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number that uniquely idenfifies each RADIUS Authentication server with which the client communicates." ::= { snMspsRadExtAuthServerEntry 1 } snMspsRadExtAuthServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type (IPv4 or IPv6) of the RADIUS authentication server referred to in the snMspsRadExtAuthServerTable entry." ::= { snMspsRadExtAuthServerEntry 2 } snMspsRadExtAuthServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address (Ipv4 or Ipv6) of the RADIUS authentication server referred to in this table entry." ::= { snMspsRadExtAuthServerEntry 3 } snMspsRadExtAuthClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port that the client uses to send requests to this server." ::= { snMspsRadExtAuthServerEntry 4 } snMspsRadExtAuthClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that that matches with the Access-Reply/Access-Challengeit from the RADIUS authentication server." ::= { snMspsRadExtAuthServerEntry 5 } -- Request/Response statistics -- -- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes -- -- TotalIncomingPackets - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received -- -- AccessRequests + PendingRequests + ClientTimeouts = -- Successfully Received -- -- snMspsRadExtAuthClientAccessRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions." ::= { snMspsRadExtAuthServerEntry 6 } snMspsRadExtAuthClientAccessRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server." ::= { snMspsRadExtAuthServerEntry 7 } snMspsRadExtAuthClientAccessAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from this server." ::= { snMspsRadExtAuthServerEntry 8 } snMspsRadExtAuthClientAccessRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from this server." ::= { snMspsRadExtAuthServerEntry 9 } snMspsRadExtAuthClientAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from this server." ::= { snMspsRadExtAuthServerEntry 10 } -- "Access-Response" includes an Access-Accept, Access-Challenge -- or Access-Reject snMspsRadExtAuthClientMalformedAccessResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as malformed access responses." ::= { snMspsRadExtAuthServerEntry 11 } snMspsRadExtAuthClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server." ::= { snMspsRadExtAuthServerEntry 12 } snMspsRadExtAuthClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for this server, which have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and is decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission." ::= { snMspsRadExtAuthServerEntry 13 } snMspsRadExtAuthClientTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to this server. After the entry timeout the client may retry to the same server, send to a different server, or give up. Retry to the same server is counted as a retransmit as well as a timeout. Send to a different server is counted as a Request as well as a timeout." ::= { snMspsRadExtAuthServerEntry 14 } snMspsRadExtAuthClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type, which were received from this server on the authentication port." ::= { snMspsRadExtAuthServerEntry 15 } snMspsRadExtAuthClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets, which were received from this server on the authentication port and dropped for some other reason." ::= { snMspsRadExtAuthServerEntry 16 } snMspsRadExtAuthServerType OBJECT-TYPE SYNTAX INTEGER { login (1), pnac (2), both (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The RADIUS Authentication server type (login or pnac or Both)." DEFVAL { both } ::= { snMspsRadExtAuthServerEntry 17 } snMspsRadAuthorizationMode OBJECT-TYPE SYNTAX INTEGER { standard (1), vendor-specific (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object used to parse the RADIUS accept/reject packet by standard mode or vendor-specific mode to get the User Management Access Control (UMAC) value (user privilege) of the user. standard - derive the function rights (user privilege) by 'SERVICE-TYPE attribute' vendor-specific - derive the function rights (user privilege) by 'Siemens Vendor Specific Attribute' Vendor-ID (4196) and Vendor Type (1) 'Siemens-Automation-Privileged-User-Group'." DEFVAL { standard } ::= { snMspsRadiusServer 10 } snMspsGuestVlanSystem OBJECT IDENTIFIER ::= { snMspsGuestVlan 1 } snMspsGuestVlanAddress OBJECT IDENTIFIER ::= { snMspsGuestVlan 2 } snMspsGuestVlanPort OBJECT IDENTIFIER ::= { snMspsGuestVlan 3 } -- -------------------------------------------------------------- -- GuestVlanTable Sub-Group -- -------------------------------------------------------------- snMspsGuestVlanEnable OBJECT-TYPE SYNTAX INTEGER { guestVlanEnabled(1), guestVlanDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enable/disable GuestVlan" DEFVAL { guestVlanDisabled } ::= { snMspsGuestVlanSystem 1} -- -------------------------------------------------------------- -- GuestVlanAddrTable Sub-Group -- -------------------------------------------------------------- snMspsGuestVlanAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsGuestVlanAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsGuestVlanAddress 1 } snMspsGuestVlanAddressEntry OBJECT-TYPE SYNTAX SnMspsGuestVlanAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsGuestVlanAddressPort, snMspsGuestVlanAddressMac } ::= {snMspsGuestVlanAddressTable 1} SnMspsGuestVlanAddressEntry ::= SEQUENCE { snMspsGuestVlanAddressMac MacAddress, snMspsGuestVlanAddressPort INTEGER, snMspsGuestVlanAddressVlan INTEGER, snMspsGuestVlanAddressInit INTEGER } snMspsGuestVlanAddressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address" ::= { snMspsGuestVlanAddressEntry 1 } snMspsGuestVlanAddressPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Port-ID that address is authenticated or blocked" ::= { snMspsGuestVlanAddressEntry 2 } snMspsGuestVlanAddressVlan OBJECT-TYPE SYNTAX INTEGER (1.. 4096) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID that address is authenticated or blocked" ::= { snMspsGuestVlanAddressEntry 3 } snMspsGuestVlanAddressInit OBJECT-TYPE SYNTAX INTEGER { guestVlan-MAC-NoAction(1), guestVlan-MAC-Init(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reinitialization of that mac address" ::= { snMspsGuestVlanAddressEntry 4 } -- -------------------------------------------------------------- -- GuestVlanPortConfig Sub-Group -- -------------------------------------------------------------- snMspsGuestVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsGuestVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ports for which Guest Vlans occurs on." ::= { snMspsGuestVlanPort 1 } snMspsGuestVlanPortEntry OBJECT-TYPE SYNTAX SnMspsGuestVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Guest VLan Port entry. " INDEX { snMspsGuestVlanPortIfIndex } ::= { snMspsGuestVlanPortTable 1 } SnMspsGuestVlanPortEntry ::= SEQUENCE { snMspsGuestVlanPortIfIndex INTEGER, snMspsGuestVlanPortEnable INTEGER, snMspsGuestVlanPortVid INTEGER, snMspsGuestVlanPortMaxAddresses INTEGER, snMspsGuestVlanPortActAddresses INTEGER, snMspsGuestVlanPortInit INTEGER } snMspsGuestVlanPortIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port on which Guest Vlans occurs on." ::= { snMspsGuestVlanPortEntry 1 } snMspsGuestVlanPortEnable OBJECT-TYPE SYNTAX INTEGER { guestVlanPortEnabled(1), guestVlanPortDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables GuestVlan on that port" DEFVAL { guestVlanPortDisabled} ::= { snMspsGuestVlanPortEntry 2 } snMspsGuestVlanPortVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Guest VLAN-Id of that port" DEFVAL { 1 } ::= { snMspsGuestVlanPortEntry 3 } snMspsGuestVlanPortMaxAddresses OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "max number of addresses the could be activated in guest VLAN in parallel on that port" DEFVAL { 1 } ::= { snMspsGuestVlanPortEntry 4 } snMspsGuestVlanPortActAddresses OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "number of addresses that are actually activated in guest VLAN on that port" ::= { snMspsGuestVlanPortEntry 5 } snMspsGuestVlanPortInit OBJECT-TYPE SYNTAX INTEGER { guestVlanNoAction(1), guestVlanPortInit(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reinitialization of all addresses activated in guest VLAN on that port" DEFVAL { guestVlanNoAction } ::= { snMspsGuestVlanPortEntry 6 } snMspsMacAuthSystem OBJECT IDENTIFIER ::= { snMspsMacAuth 1 } snMspsMacAuthAddress OBJECT IDENTIFIER ::= { snMspsMacAuth 2 } snMspsMacAuthPort OBJECT IDENTIFIER ::= { snMspsMacAuth 3 } -- -------------------------------------------------------------- -- MacAuthTable Sub-Group -- -------------------------------------------------------------- snMspsMacAuthEnable OBJECT-TYPE SYNTAX INTEGER { macAuthEnabled(1), macAuthDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enable/disable MAC authentication" DEFVAL { macAuthDisabled } ::= { snMspsMacAuthSystem 1} -- -------------------------------------------------------------- -- MacAuthAddrTable Sub-Group -- -------------------------------------------------------------- snMspsMacAuthAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMacAuthAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { snMspsMacAuthAddress 1 } snMspsMacAuthAddressEntry OBJECT-TYPE SYNTAX SnMspsMacAuthAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { snMspsMacAuthAddressPort, snMspsMacAuthAddressMac } ::= {snMspsMacAuthAddressTable 1} SnMspsMacAuthAddressEntry ::= SEQUENCE { snMspsMacAuthAddressMac MacAddress, snMspsMacAuthAddressPort INTEGER, snMspsMacAuthAddressVlan INTEGER, snMspsMacAuthAddressState INTEGER, snMspsMacAuthAddressReAuth INTEGER } snMspsMacAuthAddressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address" ::= { snMspsMacAuthAddressEntry 1 } snMspsMacAuthAddressPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Port-ID that address is authenticated or blocked" ::= { snMspsMacAuthAddressEntry 2 } snMspsMacAuthAddressVlan OBJECT-TYPE SYNTAX INTEGER (1.. 4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID that address is authenticated or blocked" ::= { snMspsMacAuthAddressEntry 3 } snMspsMacAuthAddressState OBJECT-TYPE SYNTAX INTEGER { macAuthMACAuthenticated(1), macAuthMACNotAuthenticated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates wether address is authenticated or blocked" ::= { snMspsMacAuthAddressEntry 4 } snMspsMacAuthAddressReAuth OBJECT-TYPE SYNTAX INTEGER { macAuthMACNoAction(1), macAuthMACReAuth(2), macAuthMACInit(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthentication of that mac address. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the device." ::= { snMspsMacAuthAddressEntry 5 } -- -------------------------------------------------------------- -- MacAuthPortConfig Sub-Group -- -------------------------------------------------------------- snMspsMacAuthPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMacAuthPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ports for which MAC Authentication occurs on." ::= { snMspsMacAuthPort 1 } snMspsMacAuthPortEntry OBJECT-TYPE SYNTAX SnMspsMacAuthPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC Authentication Port entry. " INDEX { snMspsMacAuthPortIfIndex } ::= { snMspsMacAuthPortTable 1 } SnMspsMacAuthPortEntry ::= SEQUENCE { snMspsMacAuthPortIfIndex INTEGER, snMspsMacAuthPortEnable INTEGER, snMspsMacAuthPortReAuth INTEGER, snMspsMacAuthPortReAuthTimeout INTEGER, snMspsMacAuthPortMaxAddresses INTEGER, snMspsMacAuthPortVlanAssignment INTEGER, snMspsMacAuthPortQuietTime INTEGER, snMspsMacAuthPortActAddressesAuth INTEGER, snMspsMacAuthPortActAddressesBlocked INTEGER, snMspsMacAuthPortReAuthenticateStart INTEGER, snMspsMacAuthPortEnableOnlyOnDot1xTimeout INTEGER } snMspsMacAuthPortIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port on which MAC Authentication occurs on." ::= { snMspsMacAuthPortEntry 1 } snMspsMacAuthPortEnable OBJECT-TYPE SYNTAX INTEGER { macAuthPortEnabled(1), macAuthPortDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables MAC authentication on that port" DEFVAL { macAuthPortDisabled} ::= { snMspsMacAuthPortEntry 2 } snMspsMacAuthPortReAuth OBJECT-TYPE SYNTAX INTEGER { macAuthReAuthEnabled(1), macAuthReAuthDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthentication enabled/disabled on that port. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the device." DEFVAL { 1 } ::= { snMspsMacAuthPortEntry 3 } snMspsMacAuthPortReAuthTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout for automatic reauthentication. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the device" DEFVAL { 0 } ::= { snMspsMacAuthPortEntry 4 } snMspsMacAuthPortMaxAddresses OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "max number of addresses the could be authenticated in parallel on that port, configuration as 0 means after first successful mac authentication port is opened for all traffic" DEFVAL { 1 } ::= { snMspsMacAuthPortEntry 5 } snMspsMacAuthPortVlanAssignment OBJECT-TYPE SYNTAX INTEGER { macAuthVlanAssignEnabled(1), macAuthVlanAssignDisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The RADIUS server is allowed to assign VLANs on ports for authenticated addresses" DEFVAL { macAuthVlanAssignDisabled } ::= { snMspsMacAuthPortEntry 6 } snMspsMacAuthPortQuietTime OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Mininmal time between RADIUS server requests for the same address on that port. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the device" DEFVAL { 10 } ::= { snMspsMacAuthPortEntry 7 } snMspsMacAuthPortActAddressesAuth OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "number of addresses that are actually authenticated on that port" ::= { snMspsMacAuthPortEntry 8 } snMspsMacAuthPortActAddressesBlocked OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "number of addresses that are actually blocked on that port" ::= { snMspsMacAuthPortEntry 9 } snMspsMacAuthPortReAuthenticateStart OBJECT-TYPE SYNTAX INTEGER { macAuthNoAction(1), macAuthPortReAuthenticate(2), macAuthPortReInit(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthenticate all authenticated addresses on that port or cleanup all address information. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the device" DEFVAL { macAuthNoAction } ::= { snMspsMacAuthPortEntry 10 } snMspsMacAuthPortEnableOnlyOnDot1xTimeout OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables MAC authentication on that port, when dot1x is timed out (or) on max retransmission." DEFVAL { disabled } ::= { snMspsMacAuthPortEntry 11 } snMspsSinemaInterfaceState OBJECT-TYPE SYNTAX INTEGER { paramactive(1), newparamloaded(2), activatingloadedparam(3), activatingoriginalparam(4), loadedparamactive(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "diagnose object for SINEMA interface state. It can be set to (1) Parameters Active, (2) New Parameters Loaded, (3) Activating Loaded Parameters , (4) Activating Original Parameters, (5) Loaded Parameters Active" DEFVAL { paramactive } ::= { snMspsSinema 1 } snMspsSinemaAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling / disabling availability of SCALANCE configuration interface" ::= { snMspsSinema 2 } snMspsSinemaResult OBJECT-TYPE SYNTAX INTEGER { loadSuccess(1), loadWrongState(2), loadIllegalPackagetype(3), loadTargetDeviceMismatch(4), loadNotEnoughResources(5), loadCoordinationError(6), loadAlreadyRunningError(7), loadNoAccess(8), activateSuccess(9), activateWrongState(10), activateCoordinationError(11), activateNotEnoughResources(12), activateError(13), activateNoAccess(14), statusNotEnoughResources(15), statusNothingLoaded(16), statusNoAccess(17), readSuccess(18), readInstanceDataNotLoaded(19), readNotEnoughResources(20), readNoAccess(21), acceptSuccess(22), acceptNotEnoughResources(23), acceptWrongState(24), acceptNoAccess(25), rollbackSuccess(26), rollbackNotEnoughResources(27), rollbackWrongState(28), rollbackNoAccess(29) } MAX-ACCESS read-write STATUS current DESCRIPTION "Result of Configuration Event (CE) received from Sinema" ::= { snMspsSinema 3 } snMspsSinemaErrorStatus OBJECT-TYPE SYNTAX INTEGER { noError(0), tooBig(1), noSuchName(2), badValue(3), readOnly(4), genErr(5), noAccess(6), wrongType(7), wrongLength(8), wrongEncoding(9), wrongValue(10), noCreation(11), inconsistentValue(12), resourceUnavailable(13), commitFailed(14), undoFailed(15), authorizationError(16), notWritable(17), inconsistentName(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the error received with respect to position of SNMP variables in TLV package" ::= { snMspsSinema 4 } snMspsSinemaErrorIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Location of the error received with respect to position of SNMP variables in TLV package" ::= { snMspsSinema 5 } snMspsMstSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. All memory should be released on all ports." ::= { snMspsMstp 1 } -- snMspsMstp 2-3 reserved snMspsMstModuleStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMstSystemControl set to start." ::= { snMspsMstp 4 } snMspsMstMaxMstInstanceNumber OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximun number of spanning trees to be allowed. An user may limit the number of Spanning Tree instances to be allowed in the Bridge. The value reflects the max number of active MSTIs that can be created. It does not include the special MSTID, the PTETID, used to identify VIDs used by Ethernet Switched Paths (ESPs)." ::= { snMspsMstp 5 } snMspsMstNoOfMstiSupported OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Maximum number of spanning tree Instances supported." ::= { snMspsMstp 6 } snMspsMstMaxHopCount OBJECT-TYPE SYNTAX Integer32 (600..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Maximum Hop Count value. One-hundredth of the configured value will be set as Max Hop Count. An agent may return a badValue error if a set is attempted to a value which is not a multiples of hundred." DEFVAL { 2000 } ::= { snMspsMstp 7 } snMspsMstBrgAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with snMspsMstCistBridgePriority or snMspsMstMstiBridgePriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol." ::= { snMspsMstp 8 } snMspsMstCistRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { snMspsMstp 9 } snMspsMstCistRegionalRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { snMspsMstp 10 } snMspsMstCistRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Cost of the path to the CIST Root as seen from this bridge." ::= { snMspsMstp 11 } snMspsMstCistRegionalRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Cost of the path to the CIST Regional Root as seen from this bridge." ::= { snMspsMstp 12 } snMspsMstCistRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge." ::= { snMspsMstp 13 } snMspsMstCistBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION "The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096." DEFVAL {32768} ::= { snMspsMstp 14 } snMspsMstCistBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." DEFVAL {2000} ::= { snMspsMstp 15 } snMspsMstCistBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." DEFVAL {1500} ::= { snMspsMstp 16 } snMspsMstCistHoldTime OBJECT-TYPE SYNTAX Integer32 UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." ::= { snMspsMstp 17 } snMspsMstCistMaxAge OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." ::= { snMspsMstp 18 } snMspsMstCistForwardDelay OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state." ::= { snMspsMstp 19 } snMspsMstMstpUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MSTP Module has been enabled." ::= { snMspsMstp 20 } snMspsMstMstpDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MSTP Module has been disabled." ::= { snMspsMstp 21 } -- snMspsMstp 22-24 reserved snMspsMstForceProtocolVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatible(0), rstp(2), mstp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp(3)' indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s." DEFVAL { mstp } ::= { snMspsMstp 25 } snMspsMstTxHoldCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate." DEFVAL { 3 } ::= { snMspsMstp 26 } snMspsMstMstiConfigIdSel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard." ::= { snMspsMstp 27 } snMspsMstMstiRegionName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address." ::= { snMspsMstp 28 } snMspsMstMstiRegionVersion OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the MST Region." ::= { snMspsMstp 29 } snMspsMstMstiConfigDigest OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuration Digest value for this Region." ::= { snMspsMstp 30 } snMspsMstBufferOverFlowCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event." ::= { snMspsMstp 31 } snMspsMstMemAllocFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event." ::= { snMspsMstp 32 } snMspsMstRegionConfigChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event." ::= { snMspsMstp 33 } snMspsMstCistBridgeRoleSelectionSemState OBJECT-TYPE SYNTAX INTEGER { initbridge (0), roleselection (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context" ::= { snMspsMstp 34 } snMspsMstCistTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context." ::= { snMspsMstp 35 } snMspsMstCistTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context." ::= { snMspsMstp 36 } snMspsMstCistNewRootBridgeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event." ::= { snMspsMstp 37 } snMspsMstCistHelloTime OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so." ::= { snMspsMstp 38 } snMspsMstCistBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..200) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second." ::= { snMspsMstp 39 } snMspsMstRstpPlusStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative module status requested by management for the RSTP+ Module. This enables or disables RSTP+ feature in the system. A value of 'enabled' (1) indicates that RSTP+ feature is enabled in the device. A value of 'disabled'(2) indicates that RSTP+ feature is disabled in the device. This feature can be enabled only if the device supports RSTP+ feature, otherwise it returns wrong value." DEFVAL {disabled} ::= { snMspsMstp 40 } snMspsMstRstpPlusMrpInterconDomainId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents RstpPlus MRP Interconnection domain Id for the RSTP and MRP ring coupling, which is equivalent to MRP Interconnection domain Id 'snMspsMrpInterconDomainID'. It returns inconsistency value, if the id is already configured as a MRP Interconnection Id in the device. It should be unambiguous with 'snMspsMrpInterconDomainID' and 'snMspsMstRstpPlusMrpInterconDomainId' in the entire topology. This can be configurable only if the device supports RSTP+ feature, otherwise it returns wrong value. If the device not supports RSTP+ feature, get of this object returns default value. This object is valid and effect only if 'snMspsMstRstpPlusStatus' is 'enabled'. Valid value should be configured to enable 'snMspsMstRstpPlusStatus'." DEFVAL { 1 } ::= { snMspsMstp 41 } -- snMspsMstp 42-44 reserved snMspsMstCistDynamicPathcostCalculation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed(when the operational status of the port changes from down to up), otherwise the link speed at the time of port creation is used for calculating the path cost. In both cases if the user has configured a pathcost for the port that will be used. By default dynamic pathcost calculation is set to false." DEFVAL { false } ::= { snMspsMstp 45 } snMspsMstCalcPortPathCostOnSpeedChg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated ports where depening on Active ports speed of Link aggregated port changes. By default dynamic pathcost calculation on change in speed is set to false." DEFVAL { false } ::= { snMspsMstp 46 } -- ----------------------------------------------------------------- -- Mst VlanId to Instance Mapping Table -- ----------------------------------------------------------------- snMspsMstVlanInstanceMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMstVlanInstanceMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one entry for each instance of MSTP." ::= { snMspsMstp 47 } snMspsMstVlanInstanceMappingEntry OBJECT-TYPE SYNTAX SnMspsMstVlanInstanceMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row containing the status of the MSTP instance." INDEX { snMspsMstInstanceIndex } ::= { snMspsMstVlanInstanceMappingTable 1 } SnMspsMstVlanInstanceMappingEntry ::= SEQUENCE { snMspsMstInstanceIndex Integer32, snMspsMstMapVlanIndex VlanId, snMspsMstUnMapVlanIndex VlanId, snMspsMstSetVlanList OCTET STRING, snMspsMstResetVlanList OCTET STRING, snMspsMstInstanceVlanMapped OCTET STRING, snMspsMstInstanceVlanMapped2k OCTET STRING, snMspsMstInstanceVlanMapped3k OCTET STRING, snMspsMstInstanceVlanMapped4k OCTET STRING } snMspsMstInstanceIndex OBJECT-TYPE SYNTAX Integer32 (1..64|4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance. In a Bridge that supports PBB-TE, the special MSTID of 4094, the PTETID, identifies VIDs that can be used by Ethernet Switched Paths (ESPs). ESPs are provisioned seperately by any external agent and do not use spanning tree." ::= { snMspsMstVlanInstanceMappingEntry 1 } snMspsMstMapVlanIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used." ::= { snMspsMstVlanInstanceMappingEntry 2 } snMspsMstUnMapVlanIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values." ::= { snMspsMstVlanInstanceMappingEntry 3 } snMspsMstSetVlanList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values." ::= { snMspsMstVlanInstanceMappingEntry 4 } snMspsMstResetVlanList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values." ::= { snMspsMstVlanInstanceMappingEntry 5 } snMspsMstInstanceVlanMapped OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'." ::= { snMspsMstVlanInstanceMappingEntry 6 } snMspsMstInstanceVlanMapped2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The first octet corresponds to VLANs with VlanIndex values 1025 through 1032; the second octet to VLANs 1033 through 1040 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095." ::= { snMspsMstVlanInstanceMappingEntry 7 } snMspsMstInstanceVlanMapped3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The first octet corresponds to VLANs with VlanIndex values of 2049 through 2056; the second octet to VLANs 2057 through 2064 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095." ::= { snMspsMstVlanInstanceMappingEntry 8 } snMspsMstInstanceVlanMapped4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4095. The first octet corresponds to VLANs with VlanIndex values 3073 through 3080; the second octet to VLANs 3081 through 3088 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095." ::= { snMspsMstVlanInstanceMappingEntry 9 } -- ----------------------------------------------------------------- -- END OF Mst VlanId to Instance Mapping Table -- ----------------------------------------------------------------- snMspsMstSetTraps OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like memory failure or buffer failure or port protocol migration or invalid packet rcvd in port 3 - All the above Traps " ::= { snMspsMstp 48 } snMspsMstGenTrapType OBJECT-TYPE SYNTAX INTEGER { none (0), up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The general events like none - none of the below values up - protocol UP, down - protocol DOWN" ::= { snMspsMstp 49 } -- snMspsMstp 50-59 reserved -- ----------------------------------------------------------------- -- Mst Multiple Spanning Tree Instance Bridge Table -- ----------------------------------------------------------------- snMspsMstMstiBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMstMstiBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing Bridge Information specific to Spanning Tree Instance." ::= { snMspsMstp 60 } snMspsMstMstiBridgeEntry OBJECT-TYPE SYNTAX SnMspsMstMstiBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the Bridge Information." INDEX { snMspsMstMstiInstanceIndex } ::= { snMspsMstMstiBridgeTable 1 } SnMspsMstMstiBridgeEntry ::= SEQUENCE { snMspsMstMstiInstanceIndex Integer32, snMspsMstMstiBridgeRegionalRoot BridgeId, snMspsMstMstiBridgePriority Integer32, snMspsMstMstiRootCost Integer32, snMspsMstMstiRootPort Integer32, snMspsMstMstiTimeSinceTopologyChange TimeTicks, snMspsMstMstiTopChanges Counter32, snMspsMstMstiNewRootBridgeCount Counter32, snMspsMstMstiBridgeRoleSelectionSemState INTEGER, snMspsMstInstanceUpCount Counter32, snMspsMstInstanceDownCount Counter32, snMspsMstOldDesignatedRoot BridgeId } snMspsMstMstiInstanceIndex OBJECT-TYPE SYNTAX Integer32 (1..64|4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spanning Tree Instance to which the information belongs. The special MSTID of 4094, known as the PTETID, identifies VIDs that are used by Ethernet Switched Paths (ESPs)." ::= { snMspsMstMstiBridgeEntry 1 } snMspsMstMstiBridgeRegionalRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node" ::= { snMspsMstMstiBridgeEntry 2 } snMspsMstMstiBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION "The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096." DEFVAL {32768} ::= { snMspsMstMstiBridgeEntry 3 } snMspsMstMstiRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Cost of the path to the MSTI Regional Root as seen by this bridge." ::= { snMspsMstMstiBridgeEntry 4 } snMspsMstMstiRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge." ::= { snMspsMstMstiBridgeEntry 5 } snMspsMstMstiTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance." ::= { snMspsMstMstiBridgeEntry 6 } snMspsMstMstiTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance." ::= { snMspsMstMstiBridgeEntry 7 } snMspsMstMstiNewRootBridgeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event." ::= { snMspsMstMstiBridgeEntry 8 } snMspsMstMstiBridgeRoleSelectionSemState OBJECT-TYPE SYNTAX INTEGER { initbridge (0), roleselection (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge." ::= { snMspsMstMstiBridgeEntry 9 } snMspsMstInstanceUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event." ::= { snMspsMstMstiBridgeEntry 10 } snMspsMstInstanceDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event." ::= { snMspsMstMstiBridgeEntry 11 } snMspsMstOldDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. " ::= { snMspsMstMstiBridgeEntry 12 } -- ----------------------------------------------------------------- -- END OF Mst Multiple Spanning Tree Instance Bridge Table -- ----------------------------------------------------------------- -- snMspsMstp 61-62 reserved -- ----------------------------------------------------------------- -- Mst Common Spanning Tree Port Table -- ----------------------------------------------------------------- snMspsMstCistPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMstCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Common Spanning Tree Port Information." ::= { snMspsMstp 63 } snMspsMstCistPortEntry OBJECT-TYPE SYNTAX SnMspsMstCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every port for Common Spanning tree." INDEX { snMspsMstCistPort } ::= { snMspsMstCistPortTable 1 } SnMspsMstCistPortEntry ::= SEQUENCE { snMspsMstCistPort Integer32, snMspsMstCistPortPathCost Integer32, snMspsMstCistPortPriority Integer32, snMspsMstCistPortDesignatedRoot BridgeId, snMspsMstCistPortDesignatedBridge BridgeId, snMspsMstCistPortDesignatedPort OCTET STRING, snMspsMstCistPortAdminP2P INTEGER, snMspsMstCistPortOperP2P TruthValue, snMspsMstCistPortAdminEdgeStatus TruthValue, snMspsMstCistPortOperEdgeStatus TruthValue, snMspsMstCistPortProtocolMigration TruthValue, snMspsMstCistPortState INTEGER, snMspsMstCistForcePortState INTEGER, snMspsMstCistPortForwardTransitions Counter32, snMspsMstCistPortRxMstBpduCount Counter32, snMspsMstCistPortRxRstBpduCount Counter32, snMspsMstCistPortRxConfigBpduCount Counter32, snMspsMstCistPortRxTcnBpduCount Counter32, snMspsMstCistPortTxMstBpduCount Counter32, snMspsMstCistPortTxRstBpduCount Counter32, snMspsMstCistPortTxConfigBpduCount Counter32, snMspsMstCistPortTxTcnBpduCount Counter32, snMspsMstCistPortInvalidMstBpduRxCount Counter32, snMspsMstCistPortInvalidRstBpduRxCount Counter32, snMspsMstCistPortInvalidConfigBpduRxCount Counter32, snMspsMstCistPortInvalidTcnBpduRxCount Counter32, snMspsMstCistPortTransmitSemState INTEGER, snMspsMstCistPortReceiveSemState INTEGER, snMspsMstCistPortProtMigrationSemState INTEGER, snMspsMstCistProtocolMigrationCount Counter32, snMspsMstCistPortDesignatedCost Integer32, snMspsMstCistPortRegionalRoot BridgeId, snMspsMstCistPortRegionalPathCost Integer32, snMspsMstCistSelectedPortRole INTEGER, snMspsMstCistCurrentPortRole INTEGER, snMspsMstCistPortInfoSemState INTEGER, snMspsMstCistPortRoleTransitionSemState INTEGER, snMspsMstCistPortStateTransitionSemState INTEGER, snMspsMstCistPortTopologyChangeSemState INTEGER, snMspsMstCistPortHelloTime Timeout, snMspsMstCistPortOperVersion INTEGER, snMspsMstCistPortEffectivePortState TruthValue, snMspsMstCistPortAutoEdgeStatus TruthValue, snMspsMstCistPortRestrictedRole TruthValue, snMspsMstCistPortRestrictedTCN TruthValue, snMspsMstCistPortAdminPathCost Integer32, snMspsMstCistPortEnableBPDURx TruthValue, snMspsMstCistPortEnableBPDUTx TruthValue, snMspsMstCistPortPseudoRootId BridgeId, snMspsMstCistPortIsL2Gp TruthValue, snMspsMstCistPortLoopGuard TruthValue, snMspsMstCistPortLimitedTCN TruthValue } snMspsMstCistPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port number of the port for which this entry contains spanning tree information." ::= { snMspsMstCistPortEntry 1 } snMspsMstCistPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the CIST Root which include this port." ::= { snMspsMstCistPortEntry 2 } snMspsMstCistPortPriority OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION "The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16." DEFVAL {128} ::= { snMspsMstCistPortEntry 3 } snMspsMstCistPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted." ::= { snMspsMstCistPortEntry 4 } snMspsMstCistPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment." ::= { snMspsMstCistPortEntry 5 } snMspsMstCistPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Port identifier of the port on the Designated Bridge for this port's segment." ::= { snMspsMstCistPortEntry 6 } snMspsMstCistPortAdminP2P OBJECT-TYPE SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means." ::= { snMspsMstCistPortEntry 7 } snMspsMstCistPortOperP2P OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the snMspsMstCistPortAdminP2P object." ::= { snMspsMstCistPortEntry 8 } snMspsMstCistPortAdminEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port." ::= { snMspsMstCistPortEntry 9 } snMspsMstCistPortOperEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the Edge Port parameter. The object is initialized to the value of snMspsMstCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU." DEFVAL { false } ::= { snMspsMstCistPortEntry 10 } snMspsMstCistPortProtocolMigration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the protocol migration state event machine variable 'mcheck' for this port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read." DEFVAL { false } ::= { snMspsMstCistPortEntry 11 } snMspsMstCistPortState OBJECT-TYPE SYNTAX INTEGER { disabled (1), discarding (2), learning (4), forwarding (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port as defined by the Common spanning tree protocol." ::= { snMspsMstCistPortEntry 12 } snMspsMstCistForcePortState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts" ::= { snMspsMstCistPortEntry 13 } snMspsMstCistPortForwardTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this port has transitioned to the Forwarding State." ::= { snMspsMstCistPortEntry 14 } snMspsMstCistPortRxMstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MST BPDUs received on this port." ::= { snMspsMstCistPortEntry 15 } snMspsMstCistPortRxRstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RST BPDUs received on this port." ::= { snMspsMstCistPortEntry 16 } snMspsMstCistPortRxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Configuration BPDUs received on this port." ::= { snMspsMstCistPortEntry 17 } snMspsMstCistPortRxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCN BPDUs received on this port." ::= { snMspsMstCistPortEntry 18 } snMspsMstCistPortTxMstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MST BPDUs Transmitted from this port." ::= { snMspsMstCistPortEntry 19 } snMspsMstCistPortTxRstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RST BPDUs Transmitted from this port." ::= { snMspsMstCistPortEntry 20 } snMspsMstCistPortTxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Configuration BPDUs Transmitted from this port." ::= { snMspsMstCistPortEntry 21 } snMspsMstCistPortTxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCN BPDUs Transmitted from this port." ::= { snMspsMstCistPortEntry 22 } snMspsMstCistPortInvalidMstBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid MST BPDUs Received on this port." ::= { snMspsMstCistPortEntry 23 } snMspsMstCistPortInvalidRstBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid RST BPDUs Received on this port." ::= { snMspsMstCistPortEntry 24 } snMspsMstCistPortInvalidConfigBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid Configuration BPDUs Received on this port." ::= { snMspsMstCistPortEntry 25 } snMspsMstCistPortInvalidTcnBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid TCN BPDUs Received on this port." ::= { snMspsMstCistPortEntry 26 } snMspsMstCistPortTransmitSemState OBJECT-TYPE SYNTAX INTEGER { transmitinit (0), transmitperiodic (1), transmitconfig (2), transmittcn (3), transmitrstp (4), idle (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current State of the Port Transmit state machine." ::= { snMspsMstCistPortEntry 27 } snMspsMstCistPortReceiveSemState OBJECT-TYPE SYNTAX INTEGER { discard (0), receive (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current State of the Port Receive state machine." ::= { snMspsMstCistPortEntry 28 } snMspsMstCistPortProtMigrationSemState OBJECT-TYPE SYNTAX INTEGER { init (0), sendrstp (1), sendingrstp (2), sendstp (3), sendingstp (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current State of the Port Protocol Migration State machine." ::= { snMspsMstCistPortEntry 29 } snMspsMstCistProtocolMigrationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generated on the occurence of this event." ::= { snMspsMstCistPortEntry 30 } snMspsMstCistPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The path cost of the Designated Port of the segment connected to this port." ::= { snMspsMstCistPortEntry 31 } snMspsMstCistPortRegionalRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted." ::= { snMspsMstCistPortEntry 32 } snMspsMstCistPortRegionalPathCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port." ::= { snMspsMstCistPortEntry 33 } snMspsMstCistSelectedPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selected Port Role of the port for this spanning tree instance." ::= { snMspsMstCistPortEntry 34 } snMspsMstCistCurrentPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4), rstpPlus(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Port Role of the port for this spanning tree instance. It returns role 'rstpPlus', if the port is ring port and spanning tree is enabled on this port." ::= { snMspsMstCistPortEntry 35 } snMspsMstCistPortInfoSemState OBJECT-TYPE SYNTAX INTEGER { disabled (0), aged (1), update (2), superiordesg (3), repeatdesg (4), inferiordesg (5), notdesg (6), present (7), receive (8), other (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Information State Machine for this port in this spanning tree context." ::= { snMspsMstCistPortEntry 36 } snMspsMstCistPortRoleTransitionSemState OBJECT-TYPE SYNTAX INTEGER { init (0), disableport (1), disabledport (2), rootport (3), designatedport (4), alternateport (5), masterport (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Transition State Machine for this port in this spanning tree context." ::= { snMspsMstCistPortEntry 37 } snMspsMstCistPortStateTransitionSemState OBJECT-TYPE SYNTAX INTEGER { discarding (0), learning (1), forwarding (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port State Transition State Machine for this port in this spanning tree context." ::= { snMspsMstCistPortEntry 38 } snMspsMstCistPortTopologyChangeSemState OBJECT-TYPE SYNTAX INTEGER { inactive (0), learning (1), detected (2), active (3), notifiedtcn (4), notifiedtc (5), propagating (6), acknowledged (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Topology Change State Machine for this port in this spanning tree context." ::= { snMspsMstCistPortEntry 39 } snMspsMstCistPortHelloTime OBJECT-TYPE SYNTAX Timeout (100..200) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second." ::= { snMspsMstCistPortEntry 40 } snMspsMstCistPortOperVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatible(0), rstp(2), mstp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs." ::= { snMspsMstCistPortEntry 41 } snMspsMstCistPortEffectivePortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST. This is will be set to False for all other times." ::= { snMspsMstCistPortEntry 42 } snMspsMstCistPortAutoEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled." ::= { snMspsMstCistPortEntry 43 } snMspsMstCistPortRestrictedRole OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. This parameter should be FALSE by default. If set it can cause lack of spanning tree connectivity. It is set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This administrator configuration is also known as 'Root Guard'." ::= {snMspsMstCistPortEntry 44} snMspsMstCistPortRestrictedTCN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause temporary loss of connectivity after changes in a spanning trees active topology as a result of persistent incorrectly learnt station location information. It is set by a network administrator to prevent bridges external to a core region of the network causing address flushing in that region, possibly because those bridges are not under the full control of the administrator or MAC_Operational for the attached LANs transitions frequently." ::= {snMspsMstCistPortEntry 45} snMspsMstCistPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost or dot1dStpPortPathCost32, which returns the operational value of the path cost." ::= { snMspsMstCistPortEntry 46} snMspsMstCistPortEnableBPDURx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored." REFERENCE "IEEE802.1ah - 13.25.18" DEFVAL { true } ::= { snMspsMstCistPortEntry 47 } snMspsMstCistPortEnableBPDUTx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gateway Port." REFERENCE "IEEE802.1ah - 13.25.19" DEFVAL { true } ::= { snMspsMstCistPortEntry 48 } snMspsMstCistPortPseudoRootId OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-write STATUS current DESCRIPTION "In MSTP Bridge, the snMspsMstCistPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway Port as the RootId in generated BPDUs." REFERENCE "IEEE802.1ah - 13.25.20" ::= { snMspsMstCistPortEntry 49 } snMspsMstCistPortIsL2Gp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The snMspsMstCistPortEnableBPDUTx should be FALSE to set snMspsMstCistPortIsL2Gp to TRUE." REFERENCE "IEEE802.1ah - 13.25.21" DEFVAL { false } ::= { snMspsMstCistPortEntry 50 } snMspsMstCistPortLoopGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to receive information through BPDUs the operation on this port will be normal. This will be useful when the neighbor bridge is faulty, i.e. it cannot send BPDUs but continues to send data traffic." DEFVAL { false } ::= { snMspsMstCistPortEntry 51 } snMspsMstCistPortLimitedTCN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "RSTP+ both the received and the detected (self-produced) TCs are accepted but not forwarded. It comes into effect only if RSTP+ feature is enabled and snMspsMstCistPortRestrictedTCN is set to FALSE." DEFVAL { false } ::= { snMspsMstCistPortEntry 52 } -- ----------------------------------------------------------------- -- END OF Mst Common Spanning Tree Port Table -- ----------------------------------------------------------------- -- ----------------------------------------------------------------- -- Mst Multiple Spanning Tree Instance Port Table -- ----------------------------------------------------------------- snMspsMstMstiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMstMstiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Spanning Tree Instance Specific Port Information." ::= { snMspsMstp 64 } snMspsMstMstiPortEntry OBJECT-TYPE SYNTAX SnMspsMstMstiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every port for each and every spanning tree instance." INDEX { snMspsMstMstiPort, snMspsMstInstanceIndex } ::= { snMspsMstMstiPortTable 1 } SnMspsMstMstiPortEntry ::= SEQUENCE { snMspsMstMstiPort Integer32, snMspsMstMstiPortPathCost Integer32, snMspsMstMstiPortPriority Integer32, snMspsMstMstiPortDesignatedRoot BridgeId, snMspsMstMstiPortDesignatedBridge BridgeId, snMspsMstMstiPortDesignatedPort OCTET STRING, snMspsMstMstiPortState INTEGER, snMspsMstMstiForcePortState INTEGER, snMspsMstMstiPortForwardTransitions Counter32, snMspsMstMstiPortReceivedBPDUs Counter32, snMspsMstMstiPortTransmittedBPDUs Counter32, snMspsMstMstiPortInvalidBPDUsRcvd Counter32, snMspsMstMstiPortDesignatedCost Integer32, snMspsMstMstiSelectedPortRole INTEGER, snMspsMstMstiCurrentPortRole INTEGER, snMspsMstMstiPortInfoSemState INTEGER, snMspsMstMstiPortRoleTransitionSemState INTEGER, snMspsMstMstiPortStateTransitionSemState INTEGER, snMspsMstMstiPortTopologyChangeSemState INTEGER, snMspsMstMstiPortEffectivePortState TruthValue, snMspsMstMstiPortAdminPathCost Integer32, snMspsMstMstiPortPseudoRootId BridgeId } snMspsMstMstiPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port number of the port for which this entry contains spanning tree information." ::= { snMspsMstMstiPortEntry 1 } snMspsMstMstiPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the MSTI Root which include this port." ::= { snMspsMstMstiPortEntry 2 } snMspsMstMstiPortPriority OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION "The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16." DEFVAL {128} ::= { snMspsMstMstiPortEntry 3 } snMspsMstMstiPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted." ::= { snMspsMstMstiPortEntry 4 } snMspsMstMstiPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment." ::= { snMspsMstMstiPortEntry 5 } snMspsMstMstiPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Port identifier of the port on the Designated Bridge for this port's segment." ::= { snMspsMstMstiPortEntry 6 } snMspsMstMstiPortState OBJECT-TYPE SYNTAX INTEGER { disabled (1), discarding (2), learning (4), forwarding (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance." ::= { snMspsMstMstiPortEntry 7 } snMspsMstMstiForcePortState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'snMspsMstCistForcePortState' is set to 'enabled' for this port" ::= { snMspsMstMstiPortEntry 8 } snMspsMstMstiPortForwardTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this port has transitioned to the Forwarding State for specific instance." ::= { snMspsMstMstiPortEntry 9 } snMspsMstMstiPortReceivedBPDUs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of BPDUs received by this port for this spanning tree instance." ::= { snMspsMstMstiPortEntry 10 } snMspsMstMstiPortTransmittedBPDUs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of BPDUs transmitted on this port for this spanning tree instance." ::= { snMspsMstMstiPortEntry 11 } snMspsMstMstiPortInvalidBPDUsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid BPDUs received on this Port for this spanning tree instance." ::= { snMspsMstMstiPortEntry 12 } snMspsMstMstiPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The path cost of the Designated Port of the segment connected to this port." ::= { snMspsMstMstiPortEntry 13 } snMspsMstMstiSelectedPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4), master(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selected Port Role of the port for this spanning tree instance." ::= { snMspsMstMstiPortEntry 14 } snMspsMstMstiCurrentPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(0), alternate(1), backup(2), root(3), designated(4), master(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Port Role of the port for this spanning tree instance." ::= { snMspsMstMstiPortEntry 15 } snMspsMstMstiPortInfoSemState OBJECT-TYPE SYNTAX INTEGER { disabled (0), aged (1), update (2), superiordesg (3), repeatdesg (4), inferiordesg (5), notdesg (6), present (7), receive (8), other (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Information State Machine for this port in this spanning tree context." ::= { snMspsMstMstiPortEntry 16 } snMspsMstMstiPortRoleTransitionSemState OBJECT-TYPE SYNTAX INTEGER { init (0), disableport (1), disabledport (2), rootport (3), designatedport (4), alternateport (5), masterport (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port Role Transition State Machine for this port in this spanning tree context." ::= { snMspsMstMstiPortEntry 17 } snMspsMstMstiPortStateTransitionSemState OBJECT-TYPE SYNTAX INTEGER { discarding (0), learning (1), forwarding (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Port State Transition State Machine for this port in this spanning tree context." ::= { snMspsMstMstiPortEntry 18 } snMspsMstMstiPortTopologyChangeSemState OBJECT-TYPE SYNTAX INTEGER { inactive (0), learning (1), detected (2), active (3), notifiedtcn (4), notifiedtc (5), propagating (6), acknowledged (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Topology Change State Machine for this port in this spanning tree context." ::= { snMspsMstMstiPortEntry 19 } snMspsMstMstiPortEffectivePortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protocol level for the specific instance. This is will be set to false at all other times." ::= { snMspsMstMstiPortEntry 20 } snMspsMstMstiPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost or dot1dStpPortPathCost32, which returns the operational value of the path cost." ::= { snMspsMstMstiPortEntry 21 } snMspsMstMstiPortPseudoRootId OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-write STATUS current DESCRIPTION "In MSTP Bridge, the snMspsMstMstiPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway Port as the RootId in generated BPDUs." REFERENCE "IEEE802.1ah - 13.25.20" ::= { snMspsMstMstiPortEntry 22 } -- ----------------------------------------------------------------- -- END OF Mst Multiple Spanning Tree Instance Port Table -- ----------------------------------------------------------------- -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapMSTPNewRootbridgeDetected NOTIFICATION-TYPE STATUS current DESCRIPTION "(M)STP new Rootbridge detected." ::= { snMspsTrapPrefix 251 } snMspsTrapMSTPTopChange NOTIFICATION-TYPE STATUS current DESCRIPTION "(M)STP Topologychange detected." ::= { snMspsTrapPrefix 252 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS SNMP Group Objects -- ---------------------------------------------------------------- snMspsSnmpObjects OBJECT-IDENTITY STATUS current DESCRIPTION " This MIB module defines MIB objects which provide mechanisms to remotely configure the attributes used by an MSPS hosted SNMP entity to control data exchange with other SNMP entities. " ::= { snMspsSnmp 1 } snMspsSnmpAgentAttributes OBJECT-IDENTITY STATUS current DESCRIPTION "" ::= { snMspsSnmpObjects 1 } snMspsSnmpAgentControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to enable or disable the SNMP agent. " DEFVAL { enabled } ::= { snMspsSnmpAgentAttributes 1 } snMspsSnmpAllowedPduVersions OBJECT-TYPE SYNTAX INTEGER { snmpv3(1), snmpv1v2c(2), snmpv1v2cv3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the agent will reply to PDUs of a specific SNMP framework version. If the PDU version of an incoming request does not match the version required by this object, the PDU will be silently discarded. " DEFVAL { snmpv1v2cv3 } ::= { snMspsSnmpAgentAttributes 2 } snMspsSnmpMinimumSecurityRequired OBJECT-TYPE SYNTAX INTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) } -- From SNMP-FRAMEWORK-MIB -- SYNTAX SnmpSecurityLevel MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the agent will reply to PDUs of a specific SNMP security level. If the PDU version of an incoming request does not match the security level required by this object, the PDU will be silently discarded. " DEFVAL { noAuthNoPriv } ::= { snMspsSnmpAgentAttributes 3 } snMspsSnmpColdStartTrapControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the agent will send a cold start trap. " DEFVAL { disabled } ::= { snMspsSnmpAgentAttributes 4 } snMspsSnmpV1V2cPduReadOnly OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the agent will restrict SNMPv1 and SNMPv2c PDUs to read-only access. Enabling this object overrides any other administrative setting that would grant read-write access for SNMPv1 and SNMPv2c PDUs to any MIB objects at this agent. " DEFVAL { disabled } ::= { snMspsSnmpAgentAttributes 5 } snMspsSnmpV1TrapControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the agent will generate SNMPv1 Trap PDUs. The administrative state of this object is checked additionally to any setting from the SNMP-TARGET-MIB and the SNMP-NOTIFICATION-MIB that influences the generation of a SNMPv1 Trap PDU. " DEFVAL { disabled } ::= { snMspsSnmpAgentAttributes 6 } snMspsSNMPV3UserMigration OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to control whether the Engine ID to be migrated or not. " DEFVAL { enabled } ::= { snMspsSnmpAgentAttributes 10 } -- ---------------------- -- snmspsnatv2.mib -- -- SIEMENS AG -- Automation & Drives -- -- object definitions to support NAT functionality -- -- Copyright (c) 2012 Siemens AG -- All rights reserved. -- ---------------------- NatStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of each feature of snMspsNatv2 i.e. whether it is enabled or not" SYNTAX INTEGER { enabled(1), disabled(2) } snMspsNatv2EnabledStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables NATv2 globally." DEFVAL { disabled } ::= { snMspsNatv2 1 } snMspsNatv2IdleTimeOut OBJECT-TYPE SYNTAX Integer32(60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "This gives the amount of time until which a connection can stay idle, after which the connection will be terminated. The time is given in seconds." DEFVAL { 60 } ::= { snMspsNatv2 2 } snMspsNatv2TcpTimeOut OBJECT-TYPE SYNTAX Integer32(300..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "This gives the amount of time the TCP session entry can be present in the NAT session table without being used or referred, before being removed from the NAT session table. Here time is in seconds." DEFVAL { 3600 } ::= { snMspsNatv2 3 } snMspsNatv2UdpTimeOut OBJECT-TYPE SYNTAX Integer32(300..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "This gives the amount of time the UDP session entry can be present in the NAT session table without being used or referred, before being removed from the NAT session table. Here time is in seconds." DEFVAL { 300 } ::= { snMspsNatv2 4 } -- SCALAR_TABLE_END nat -- NAT Dynamic Table, also called as translation table. -- dynamic translation entries are created/deleted on the fly. -- this table is for monitoring and not for configuration. snMspsNatv2DynamicTransTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNatv2DynamicTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a read-only table which gives the IP address and port mappings present in the NAT table. This is nothing but the NAT translation table. Rows can neither be created nor be deleted using the rowstatus column. Rows are automatically created and deleted by NAT module. The rowstatus will always hold the value ACTIVE." ::= { snMspsNatv2 5 } snMspsNatv2DynamicTransEntry OBJECT-TYPE SYNTAX SnMspsNatv2DynamicTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the NAT dynamic table." INDEX { snMspsNatv2DynamicTransInterfaceNum, snMspsNatv2DynamicTransLocalIp, snMspsNatv2DynamicTransLocalPort, snMspsNatv2DynamicTransOutsideIp, snMspsNatv2DynamicTransOutsidePort } ::= { snMspsNatv2DynamicTransTable 1 } SnMspsNatv2DynamicTransEntry ::= SEQUENCE { snMspsNatv2DynamicTransInterfaceNum Integer32, snMspsNatv2DynamicTransLocalIp IpAddress, snMspsNatv2DynamicTransTranslatedLocalIp IpAddress, snMspsNatv2DynamicTransLocalPort Integer32, snMspsNatv2DynamicTransTranslatedLocalPort Integer32, snMspsNatv2DynamicTransOutsideIp IpAddress, snMspsNatv2DynamicTransOutsidePort Integer32, snMspsNatv2DynamicTransLastUseTime Integer32 } snMspsNatv2DynamicTransInterfaceNum OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives the global interface number on which the session is going on." ::= { snMspsNatv2DynamicTransEntry 1 } snMspsNatv2DynamicTransLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives the actual IP address of the host connected to inside network." ::= { snMspsNatv2DynamicTransEntry 2 } snMspsNatv2DynamicTransTranslatedLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is the address assigned to the local host by NAT. All the hosts from outside will contact the local host through this valid IP Address." ::= { snMspsNatv2DynamicTransEntry 3 } snMspsNatv2DynamicTransLocalPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the actual source/destination port (UDP/TCP) used by the local host for communicating with the outside network." ::= { snMspsNatv2DynamicTransEntry 4 } snMspsNatv2DynamicTransTranslatedLocalPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the port number assigned by NAT, when PAT is enabled. Otherwise the original port number is retained." ::= { snMspsNatv2DynamicTransEntry 5 } snMspsNatv2DynamicTransOutsideIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives the IP address of the outside host which the above stated Local host is contacting." ::= { snMspsNatv2DynamicTransEntry 6 } snMspsNatv2DynamicTransOutsidePort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the port number of the outside host on which it is being contacted." ::= { snMspsNatv2DynamicTransEntry 7 } snMspsNatv2DynamicTransLastUseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This gives the amount of time (in seconds) for which the above particular connection has remained idle." ::= { snMspsNatv2DynamicTransEntry 8 } -- NAT global IP address table. To list the global IP addresses obtained -- from IANA. snMspsNatv2GlobalAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNatv2GlobalAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This configuration table is used to list all the global IP addresses obtained from InterNIC and which can be used by NAT module for translation." ::= { snMspsNatv2 6 } snMspsNatv2GlobalAddressEntry OBJECT-TYPE SYNTAX SnMspsNatv2GlobalAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the NAT global IP address table." INDEX { snMspsNatv2GlobalAddressInterfaceNum, snMspsNatv2GlobalAddressTranslatedLocalIp } ::= { snMspsNatv2GlobalAddressTable 1 } SnMspsNatv2GlobalAddressEntry ::= SEQUENCE { snMspsNatv2GlobalAddressInterfaceNum Integer32, snMspsNatv2GlobalAddressTranslatedLocalIp IpAddress, snMspsNatv2GlobalAddressMask IpAddress, snMspsNatv2GlobalAddressEntryStatus RowStatus } snMspsNatv2GlobalAddressInterfaceNum OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives the interface number on which the global IP address given below should be used for local IP address translation." ::= { snMspsNatv2GlobalAddressEntry 1 } snMspsNatv2GlobalAddressTranslatedLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the IP address network number obtained from the IANA which can be used by NAT for translating the local IP addresses whose packets are going on the corresponding interface number given by natGlobalAddressInterfaceNum." ::= { snMspsNatv2GlobalAddressEntry 2 } snMspsNatv2GlobalAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This when applied on the natGlobalAddressTranslatedLocalIp gives the range of global IP Addresses that can be used by the NAT module to translate the local IP Address whose packets are transmitted on the given interface number." ::= { snMspsNatv2GlobalAddressEntry 3 } snMspsNatv2GlobalAddressEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the entry can be used as specified in the SNMP V2 standard. " ::= { snMspsNatv2GlobalAddressEntry 4 } -- NAT Static address assignment table snMspsNatv2StaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNatv2StaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a configurable table in which the static IP address mapping between the LOCAL IP address and GLOBAL IP address is configured." ::= { snMspsNatv2 7 } snMspsNatv2StaticEntry OBJECT-TYPE SYNTAX SnMspsNatv2StaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the NAT static configuration table." INDEX { snMspsNatv2StaticInterfaceNum, snMspsNatv2StaticLocalIp } ::= { snMspsNatv2StaticTable 1 } SnMspsNatv2StaticEntry ::= SEQUENCE { snMspsNatv2StaticInterfaceNum Integer32, snMspsNatv2StaticLocalIp IpAddress, snMspsNatv2StaticTranslatedLocalIp IpAddress, snMspsNatv2StaticEntryStatus RowStatus } snMspsNatv2StaticInterfaceNum OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local host listed below will use the corresponding global IP if it sends packets on this interface." ::= { snMspsNatv2StaticEntry 1 } snMspsNatv2StaticLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the IP address of the host present in the inside network." ::= { snMspsNatv2StaticEntry 2 } snMspsNatv2StaticTranslatedLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IP address that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this mapping will be used along with the NAT entry to reverse translation. This global IP will not be used by any other host." ::= { snMspsNatv2StaticEntry 3 } snMspsNatv2StaticEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the entry can be used as specified in the SNMP V2 standard. " ::= { snMspsNatv2StaticEntry 4 } -- NAT Static NAPT assignment table snMspsNatv2StaticNaptTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNatv2StaticNaptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a configurable table in which the static IP address and Port mapping between the Local IP address, Local Port and Global IP address, Global Port is configured." ::= { snMspsNatv2 8 } snMspsNatv2StaticNaptEntry OBJECT-TYPE SYNTAX SnMspsNatv2StaticNaptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the NAT StaticNapt configuration table." INDEX { snMspsNatv2StaticNaptInterfaceNum, snMspsNatv2StaticNaptLocalIp, snMspsNatv2StaticNaptStartLocalPort, snMspsNatv2StaticNaptEndLocalPort, snMspsNatv2StaticNaptProtocolNumber } ::= { snMspsNatv2StaticNaptTable 1 } SnMspsNatv2StaticNaptEntry ::= SEQUENCE { snMspsNatv2StaticNaptInterfaceNum Integer32, snMspsNatv2StaticNaptLocalIp IpAddress, snMspsNatv2StaticNaptStartLocalPort Integer32, snMspsNatv2StaticNaptEndLocalPort Integer32, snMspsNatv2StaticNaptProtocolNumber INTEGER, snMspsNatv2StaticNaptTranslatedLocalIp IpAddress, snMspsNatv2StaticNaptTranslatedLocalPort Integer32, snMspsNatv2StaticNaptDescription DisplayString, snMspsNatv2StaticNaptEntryStatus RowStatus } snMspsNatv2StaticNaptInterfaceNum OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local host with the local port listed below will use the corresponding global IP and global port if it sends packets on this interface." ::= { snMspsNatv2StaticNaptEntry 1 } snMspsNatv2StaticNaptLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the IP address of the host present in the inside network." ::= { snMspsNatv2StaticNaptEntry 2 } snMspsNatv2StaticNaptStartLocalPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the start Port of the host present in the inside network." ::= { snMspsNatv2StaticNaptEntry 3 } snMspsNatv2StaticNaptEndLocalPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the End Port of the host present in the inside network." ::= { snMspsNatv2StaticNaptEntry 4 } snMspsNatv2StaticNaptProtocolNumber OBJECT-TYPE SYNTAX INTEGER { tcp(6), udp(17), any(255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is protocol number which is to be allowed" ::= { snMspsNatv2StaticNaptEntry 5 } snMspsNatv2StaticNaptTranslatedLocalIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IP address that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this mapping will be used along with the NAT entry to reverse translation." ::= { snMspsNatv2StaticNaptEntry 6 } snMspsNatv2StaticNaptTranslatedLocalPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Port that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this mapping will be used along with the NAT entry to reverse translation. " ::= { snMspsNatv2StaticNaptEntry 7 } snMspsNatv2StaticNaptDescription OBJECT-TYPE SYNTAX DisplayString(SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the description of the entry given by the user at the time of configuration" ::= { snMspsNatv2StaticNaptEntry 8 } snMspsNatv2StaticNaptEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the entry can be used as specified in the SNMP V2 standard. " ::= { snMspsNatv2StaticNaptEntry 9 } --nat interface table --defines the operation flags snMspsNatv2IfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNatv2IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This tables gives the interface number on which NAT,NAPT and TWO WAY NAT are enabled." ::= { snMspsNatv2 9 } snMspsNatv2IfEntry OBJECT-TYPE SYNTAX SnMspsNatv2IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the NAT Interface table." INDEX { snMspsNatv2IfInterfaceNumber } ::= { snMspsNatv2IfTable 1 } SnMspsNatv2IfEntry ::= SEQUENCE { snMspsNatv2IfInterfaceNumber Integer32, snMspsNatv2IfNat NatStatus, snMspsNatv2IfNapt NatStatus, snMspsNatv2IfEntryStatus RowStatus } snMspsNatv2IfInterfaceNumber OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives the global interface number on which the following features can be enabled." ::= { snMspsNatv2IfEntry 1 } snMspsNatv2IfNat OBJECT-TYPE SYNTAX NatStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This enables NAT on interface number given by natIfInterfaceNumber. Only the inside host can initiate connections. Translation will be done on outbound packets only. This object can be enabled only after natGlobalAddressTable and natLocalAddressTable are configured." DEFVAL { disabled } ::= { snMspsNatv2IfEntry 2 } snMspsNatv2IfNapt OBJECT-TYPE SYNTAX NatStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This enables port translation on interface number given by natIfInterfaceNumber. If this feature is enabled, then the same global IP address is overloaded and can be used for many local host by translating the port number. natIfNat gets enabled when this object is enabled and natIfNat cannot be disabled when natIfNapt is enabled." DEFVAL { disabled } ::= { snMspsNatv2IfEntry 3 } snMspsNatv2IfEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the entry can be used as specified in the SNMP V2 standard. " ::= { snMspsNatv2IfEntry 4 } -- ---------------------------------------------------------------- -- MSPS C-PLUG Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: SN-MSPS-CPLUG-MIB -- ---------------------------------------------------------------- snMspsCplugState OBJECT-TYPE SYNTAX INTEGER { notPresent (1), notAccepted (4), accepted (5), factory (6), missing (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the C-Plug. 1 - C-PLUG is not present 4 - C-PLUG is not accepted 5 - C-PLUG is accepted 6 - C-PLUG is in factory state 7 - C-PLUG is not present, but needed in the current configuration" ::= { snMspsCplug 1 } snMspsCplugDeviceGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device Group string, which is currently stored on C-Plug" ::= { snMspsCplug 5 } snMspsCplugDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device Type string, which is currently stored on C-Plug" ::= { snMspsCplug 6 } snMspsCplugInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information about the C-PLUG as null terminated string" DEFVAL {""} ::= { snMspsCplug 10 } snMspsCplugErrNum OBJECT-TYPE SYNTAX INTEGER { noError (0), damaged (1), notReadable (3), notWritable (4), crcError (5), wrongGroupID (6), wrongTypeID (7), wrongHwVersion (8), wrongConfVersion (9), noCplug (10), invalidFiles (11) } MAX-ACCESS read-only STATUS current DESCRIPTION "It displays the number of the last error. Following error codes are defined: 0 - C-PLUG has no Error 1 - C-PLUG is damaged 3 - C-PLUG can't be read 4 - C-PLUG can't be written 5 - C-PLUG has a CRC error 6 - No match in group identifier 7 - No match in type identifier 8 - Hardware version is not compatible 9 - Configuration version is not compatible 10 - C-PLUG is not present 11 - Files on the C-PLUG are not valid" ::= { snMspsCplug 11 } snMspsCplugFileSystem OBJECT-TYPE SYNTAX INTEGER { fsNotFound (0), fsTfssDos (1), fsIecp (2), fsInvalid (3), fsUbifs (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of file system used on C-PLUG. Following file system types are defined: 0 - No file system found 1 - TFSS DOS 2 - IECP 3 - File system is not valid 4 - UBIFS" ::= { snMspsCplug 12 } snMspsCplugFileSystemSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total size of file system memory in bytes on C-PLUG" ::= { snMspsCplug 13 } snMspsCplugFileSystemUsage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The size of file system memory in bytes on C-PLUG, which is currently allocated" ::= { snMspsCplug 14 } snMspsCplugConfRevision OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number of configuration, which is currently stored on the C-PLUG" ::= { snMspsCplug 15 } snMspsCplugFwOnPlugStatus OBJECT-TYPE SYNTAX INTEGER { not-supported (0), fw-present(1), fw-not-present(2), not-enough-storage(10), sync-error (11), plug-not-accepted (12) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status variable represents current state of feature 'Firmware on PLUG': 0 - The feature is not supported on device. 1 - Firmware file is present on PLUG. 2 - Firmware file is not present on PLUG. 10 - The PLUG has not enough free storage. 11 - An error occurred during copying or removing firmware file from PLUG. 12 - PLUG has a general error. Additional information could be evaluated using read access to snMspsCplugErrNum. " ::= { snMspsCplug 18 } snMspsCplugFwOnPlugEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This control variable enables support of firmware file synchronization with PLUG. " DEFVAL { false } ::= { snMspsCplug 19 } snMspsCplugFormat OBJECT-TYPE SYNTAX INTEGER { no-error (0), clean (1), write (2), format-error (3), no-cplug (4), clean-in-progress (10), write-in-progress (11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using factoryclean(1) initiates erasing the complete C-PLUG to factory default. Write access using write(2) initiates a factory clean and write of the current device configuration to the C-PLUG. Write access using other values will cause 'bad value' error. Read access will return following values: 0 - No error is occurred. 3 - An error is occurred during formatting C-Plug. 4 - C-PLUG is not present on the device. 10 - Erasing C-PLUG to factory default in progress. 11 - Writing current device configuration to C-PLUG in progress. In error case, additional error information could be evaluated using read access to snMspsCplugErrNum. " ::= { snMspsCplug 20 } -- ---------------------------------------------------------------- -- MSPS KEY-PLUG Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: SN-MSPS-KEY-PLUG-MIB -- ---------------------------------------------------------------- snMspsKeyPlugState OBJECT-TYPE SYNTAX INTEGER { notPresent (1), notAccepted (4), accepted (5), missing (7), wrong (8), unknown (9), defective (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the KEY-PLUG. Following states are defined: 1 - KEY-PLUG is not present 4 - KEY-PLUG is not accepted 5 - KEY-PLUG is accepted 7 - KEY-PLUG is missing (device configuration was previously created with KEY-PLUG) 8 - KEY-PLUG is wrong (device configuration was created with different KEY-PLUG) 9 - KEY-PLUG is unknown 10 - KEY-PLUG is defective" ::= { snMspsKeyPlug 1 } -- snMspsKeyPlug 2 Reserved for future extensions -- snMspsKeyPlug 3 Reserved for future extensions -- snMspsKeyPlug 4 Reserved for future extensions snMspsKeyPlugHwOrderId OBJECT-TYPE SYNTAX SnMspsOrderNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Order ID (MLFB number) of KEY-PLUG" ::= { snMspsKeyPlug 5 } snMspsKeyPlugHwSerialNumber OBJECT-TYPE SYNTAX SnMspsSerialNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of KEY-PLUG" ::= { snMspsKeyPlug 6 } snMspsKeyPlugFunction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of features available with current KEY-PLUG" ::= { snMspsKeyPlug 7 } -- ---------------------------------------------------------------- -- MSPS LOG Group Objects -- ---------------------------------------------------------------- -- ---------------------------------------------------------------- -- MSPS Component Objects: LOG MIB -- ---------------------------------------------------------------- snMspsLogMaxEntries OBJECT-TYPE SYNTAX INTEGER (10..400) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of events that can be kept in log book." DEFVAL { 400 } ::= { snMspsLog 1 } snMspsLogCurrentEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of events that are currently kept log book." ::= { snMspsLog 2 } -- snMspsLogNewEntries OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Counter for events that are logged in Non-Volatile Memory. -- This counter starts at 0 after each system start. User can reset -- this counter at any time by writing 0 to this object." -- DEFVAL { 0 } -- ::= { snMspsLog 3 } snMspsLogClear OBJECT-TYPE SYNTAX INTEGER{ no-operation(1), start-clear(2), clear-in-progress(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to start-clear(2) value, clears the events that are kept in Non-Volatile Memory." ::= { snMspsLog 4 } snMspsLogTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the last events that occurred in the system." ::= { snMspsLog 5 } snMspsLogEntry OBJECT-TYPE SYNTAX SnMspsLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The description of an event that occurred in the system, and was stored in log book." INDEX { snMspsLogEntryIdx } ::= { snMspsLogTable 1 } SnMspsLogEntry ::= SEQUENCE { snMspsLogEntryIdx INTEGER, snMspsLogEntryId INTEGER, snMspsLogRestart INTEGER, snMspsLogSysUpTime DisplayString, snMspsLogDescr DisplayString, snMspsLogSeverity INTEGER, snMspsLogSysTime DisplayString } snMspsLogEntryIdx OBJECT-TYPE SYNTAX INTEGER (1..1200) MAX-ACCESS read-only STATUS current DESCRIPTION "Log book ID of an entry." ::= { snMspsLogEntry 1 } snMspsLogEntryId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Log book internal ID of an entry." ::= { snMspsLogEntry 2 } snMspsLogRestart OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Log book entrys restart number" ::= { snMspsLogEntry 3 } snMspsLogSysUpTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "System up time of entry in ASCII" DEFVAL { "" } ::= { snMspsLogEntry 4 } snMspsLogDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII description of the event." DEFVAL { "" } ::= { snMspsLogEntry 5 } snMspsLogSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity level of the event" ::= { snMspsLogEntry 6 } snMspsLogSysTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "System time information" DEFVAL { "" } ::= { snMspsLogEntry 7 } snMspsSecurityLogMaxEntries OBJECT-TYPE SYNTAX INTEGER (10..400) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of security-relevant events that can be kept in log book." DEFVAL { 400 } ::= { snMspsLog 20 } snMspsSecurityCurrentEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of security events that are currently present in the log book." ::= { snMspsLog 21 } snMspsSecurityLogClear OBJECT-TYPE SYNTAX INTEGER{ no-operation(1), start-clear(2), clear-in-progress(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to start-clear(2) value, clears the security events that are kept in Non-Volatile Memory." ::= { snMspsLog 22 } snMspsSecurityLogTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSecurityLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the last security events that occurred in the system." ::= { snMspsLog 25 } snMspsSecurityLogEntry OBJECT-TYPE SYNTAX SnMspsSecurityLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The description of an event that occurred in the system, and was stored in log book." INDEX { snMspsSecurityLogEntryIdx } ::= { snMspsSecurityLogTable 1 } SnMspsSecurityLogEntry ::= SEQUENCE { snMspsSecurityLogEntryIdx INTEGER, snMspsSecurityLogEntryId INTEGER, snMspsSecurityLogRestart INTEGER, snMspsSecurityLogSysUpTime DisplayString, snMspsSecurityLogDescr DisplayString, snMspsSecurityLogSeverity INTEGER, snMspsSecurityLogSysTime DisplayString } snMspsSecurityLogEntryIdx OBJECT-TYPE SYNTAX INTEGER (1..400) MAX-ACCESS read-only STATUS current DESCRIPTION "Log book ID of an entry." ::= { snMspsSecurityLogEntry 1 } snMspsSecurityLogEntryId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Log book internal ID of an entry." ::= { snMspsSecurityLogEntry 2 } snMspsSecurityLogRestart OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Log book entrys restart number" ::= { snMspsSecurityLogEntry 3 } snMspsSecurityLogSysUpTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "System up time of entry in ASCII" DEFVAL { "" } ::= { snMspsSecurityLogEntry 4 } snMspsSecurityLogDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII description of the event." DEFVAL { "" } ::= { snMspsSecurityLogEntry 5 } snMspsSecurityLogSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity level of the security event" ::= { snMspsSecurityLogEntry 6 } snMspsSecurityLogSysTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "System time information" DEFVAL { "" } ::= { snMspsSecurityLogEntry 7 } snMspsFaultState OBJECT-TYPE SYNTAX INTEGER { noFault(1), fault(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates system fault state (state of fault LED/signaling contact)." ::= { snMspsReport 1 } snMspsSignalledFaults OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of signaled faults." ::= { snMspsReport 2 } snMspsFaultValue OBJECT-TYPE SYNTAX BITS { power(0), linkdown(1), internal-error(2), standby(3), rm(4), fmp(5), reserved6(6), reserved7(7), linkup(8), loopd(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), mrp-interconnection(15), observer-error(16), non-recoverable-ring-error(17), cplug-error(18), profinet-error(19), module-error(20), fan-module-faulty(21), wlan-no-free-channels(22), wlan-card(23), reserved24(24), reserved25(25), reserved26(26), reserved27(27), reserved28(28), reserved29(29), reserved30(30), reserved31(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "Fault value: 0 = no fault, 0. Octet MSB bit 0 = power, 0. Octet bit 1 = linkdown, 0. Octet bit 2 = internal error, 0. Octet bit 3 = standby, 0. Octet bit 4 = rm, 0. Octet bit 5 = fmp, 0. Octet bit 6 = reserved, 0. Octet LSB bit 7 = reserved, 1. Octet MSB bit 8 = linkup, 1. Octet bit 9 = loopd, 1. Octet bit 10 = reserved, 1. Octet bit 11 = reserved, 1. Octet bit 12 = reserved, 1. Octet bit 13 = reserved, 1. Octet bit 14 = reserved, 1. Octet LSB bit 15 = MRP interconnection open, 2. Octet MSB bit 16 = observer error, 2. Octet bit 17 = non-recoverable ring error, 2. Octet bit 18 = c-plug error, 2. Octet bit 19 = PROFINET error, 2. Octet bit 20 = module error, 2. Octet bit 21 = fan module faulty, 2. Octet bit 22 = wlan no free channels, 2. Octet LSB bit 23 = wlan card faulty, 3. Octet MSB bit 24 = reserved, 3. Octet bit 25 = reserved, 3. Octet bit 26 = reserved, 3. Octet bit 27 = reserved, 3. Octet bit 28 = reserved, 3. Octet bit 29 = reserved, 3. Octet bit 30 = reserved, 3. Octet LSB bit 31 = reserved" ::= { snMspsReport 3 } snMspsPowerSupply1State OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of power supply line 1." ::= { snMspsReport 4 } snMspsPowerSupply2State OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of power supply line 2." ::= { snMspsReport 5 } snMspsPowerSupply1Mask OBJECT-TYPE SYNTAX INTEGER { checked(1), notChecked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mask of power supply line 1." DEFVAL {notChecked} ::= { snMspsReport 6 } snMspsPowerSupply2Mask OBJECT-TYPE SYNTAX INTEGER { checked(1), notChecked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mask of power supply line 2." DEFVAL {notChecked} ::= { snMspsReport 7 } snMspsPowerSupply3Mask OBJECT-TYPE SYNTAX INTEGER { checked(1), notChecked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mask of power supply line 3 (PoE)." DEFVAL {notChecked} ::= { snMspsReport 8 } snMspsPowerSupply3State OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of power supply line 3 (PoE)." ::= { snMspsReport 9 } snMspsSetButtonControlDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable reset to factory defaults by set select button." ::= { snMspsReport 10 } snMspsSetButtonControlRm OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable set redundancy master by set select button." ::= { snMspsReport 11 } snMspsSetButtonControlFaultMask OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable set fault mask by set select button." ::= { snMspsReport 12 } snMspsReportSyslogStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling SYSLOG in the system." ::= { snMspsReport 13 } snMspsReportSmtpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling SMTP in the system." ::= { snMspsReport 14 } snMspsReportSmsStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling SMS functionality in the system. Enabling is only supported on devices with corresponding functionality." ::= { snMspsReport 30 } snMspsReportSignalingContactControl OBJECT-TYPE SYNTAX INTEGER { conventional(1), aligned(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set signalling contact control to conventional or to alligned. - Conventional: Contact opened when Fault - Aligned: Contact controlled by snSignalingContactState" DEFVAL {conventional} ::= { snMspsReport 40 } snMspsReportSignalingContactState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set state of signalling contact - takes only affect if snSignalingContactControl is set to aligned (2) - on: contact closed - off: contact opened" DEFVAL {off} ::= { snMspsReport 41 } snMspsFaultResetCounters OBJECT-TYPE SYNTAX INTEGER { no-operation(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all fault counters." ::= { snMspsReport 42 } snMspsPowerSupplyRedundancyMonitor OBJECT-TYPE SYNTAX INTEGER { all(1), l1-l2(2), l1-l3(3), l2-l3(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "In case the redundant power supply will be monitored by PROFINET, the value of this object defines, which power lines have to be considered. all(1) - all available power lines will be monitored l1-l2(2) - only L1 and L2 will be monitored l1-l3(3) - only L1 and L3 will be monitored l2-l3(4) - only L2 and L3 will be monitored This object can only be configured if the device has more than one power line. " DEFVAL {1} ::= { snMspsReport 50 } snMspsSetButtonControlRestart OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable restart device by set select button." ::= { snMspsReport 54 } -- -------------------------------------------------------------- -- Report Fault State Sub-Group -- -------------------------------------------------------------- snMspsReportFaultStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsReportFaultStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fault state table." ::= { snMspsReport 60 } snMspsReportFaultStateEntry OBJECT-TYPE SYNTAX SnMspsReportFaultStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fault state table rows entries." INDEX { snMspsReportFaultIndex } ::= { snMspsReportFaultStateTable 1 } SnMspsReportFaultStateEntry ::= SEQUENCE { snMspsReportFaultIndex Integer32, snMspsReportFaultStateTimeStamp TimeTicks, snMspsReportFaultState DisplayString, snMspsReportFaultStateClear INTEGER } snMspsReportFaultIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of fault state table." ::= { snMspsReportFaultStateEntry 1 } snMspsReportFaultStateTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of sysUpTime, when the relevant fault state occurs." ::= { snMspsReportFaultStateEntry 2 } snMspsReportFaultState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Fault state." ::= { snMspsReportFaultStateEntry 3 } snMspsReportFaultStateClear OBJECT-TYPE SYNTAX INTEGER{ no-operation(0), delete(1), not-supported(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write access using delete(1) leads to deleting relevant fault state from system. Read access to this MIB object will return no-operation(0), if this entry is in initial state. Read access to this MIB object will return not-supported(2), if this fault state must not be cleared" ::= { snMspsReportFaultStateEntry 4 } -- -------------------------------------------------------------- -- Report Event Table -- -------------------------------------------------------------- snMspsReportEventTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsReportEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the targets to which notifications shall be sent" ::= { snMspsReport 80 } snMspsReportEventEntry OBJECT-TYPE SYNTAX SnMspsReportEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Different kinds of notifications can be configured per event." INDEX { snMspsReportEventIndex } ::= { snMspsReportEventTable 1 } SnMspsReportEventEntry ::= SEQUENCE { snMspsReportEventIndex INTEGER, snMspsReportEventType INTEGER, snMspsReportEventMail TruthValue, snMspsReportEventLog TruthValue, snMspsReportEventTrap TruthValue, snMspsReportEventSysLog TruthValue, snMspsReportEventFault TruthValue } snMspsReportEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of each event, which has to be configured" ::= { snMspsReportEventEntry 1 } snMspsReportEventType OBJECT-TYPE SYNTAX INTEGER { cold-warm-start(0), link-change(1), auth-failure(2), rmon-alarm(3), power-change(4), rm-state-change(5), stp-rstp-mstp-change(6), fault-state(7), standby-state-change(8), vrrp-state-change(9), wlan-overlap-ap(10), wlan-wds(11), wlan-radar-iterference(12), wlan-authentication(13), wlan-authentication-log(14), loopd-state-change(15), ipcf-max-station(16), ipcf-update-time(17), cyclic-poll-excd(18), ospf-state-change(19), ddns-client-logs(22), system-connection-status(24), wlan-general(25), pnac-port-auth-state-change(27), poe-state-change(28), digital-in(29), vpn-tunnel(30), fmp-state-change(31), linkcheck-change(32), cli-script-file-status(33), secure-ntp(34), config-change(35), mrp-interconnection-state-change(36), service-information(37) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or disables different kinds the occurred events could be processed. Possible values are: 0 - Cold or Warm start notification 1 - Link change notification 2 - Authentication failure notification 3 - RMON alarm notification 4 - Power change notification 5 - RM state change notification 6 - Spanning Tree notification 7 - Fault notification 8 - Standby state change notification 9 - VRRP state change notification 10 - Wireless overlap AP events 11 - Wireless WDS events 12 - Wireless radar intereference detection 13 - Wireless authentication events 14 - Wireless authentiction log 15 - Loop Detection state change notification 16 - iPCF PROFINET max. Station 17 - iPCF PROFINET max. Update Time 18 - iPCF PROFINET Cyclic Poll Size Excd. 19 - OSPF state change notification 25 - Wireless General 27 - PNAC port authentication state change event 28 - PoE state change notification 29 - Digital Input 30 - VPN Tunnel 31 - FMP state change notification 32 - Linkcheck change notification 33 - CLI Script File status notification 34 - Secure NTP 35 - Configuration Change 36 - MRP Interconnection state change notification 37 - Service Information" ::= { snMspsReportEventEntry 2 } snMspsReportEventMail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables mail notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return bad value error." DEFVAL { false } ::= { snMspsReportEventEntry 3 } snMspsReportEventLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables creating log entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return bad value error." DEFVAL { false } ::= { snMspsReportEventEntry 4 } snMspsReportEventTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables sending traps when relevant event occurs. If this kind of notifi-cation is not supported by event, the write access with true will return bad value error." DEFVAL { false } ::= { snMspsReportEventEntry 5 } snMspsReportEventSysLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables creating syslog entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return bad value error." DEFVAL { false } ::= { snMspsReportEventEntry 6 } snMspsReportEventFault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables fault notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return bad value error." DEFVAL { false } ::= { snMspsReportEventEntry 7 } -- -------------------------------------------------------------- -- Report Severity Table -- -------------------------------------------------------------- snMspsReportSeverityTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsReportSeverityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the severity levels for given client types" ::= { snMspsReport 85 } snMspsReportSeverityEntry OBJECT-TYPE SYNTAX SnMspsReportSeverityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Different kinds of severities can be configured per client type." INDEX { snMspsReportSeverityIndex } ::= { snMspsReportSeverityTable 1 } SnMspsReportSeverityEntry ::= SEQUENCE { snMspsReportSeverityIndex INTEGER, snMspsReportSeverityClientType INTEGER, snMspsReportSeveritySeverity INTEGER } snMspsReportSeverityIndex OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of each event, which has to be configured with a severity" ::= { snMspsReportSeverityEntry 1 } snMspsReportSeverityClientType OBJECT-TYPE SYNTAX INTEGER { log(1), mail(2), syslog(3), sms(4), wlan-authlog(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The client type of the entry" ::= { snMspsReportSeverityEntry 2 } snMspsReportSeveritySeverity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity level of the given client type" ::= { snMspsReportSeverityEntry 3 } -- -------------------------------------------------------------- -- Service information -- -------------------------------------------------------------- snMspsReportServiceInformation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..512)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description of service information" ::= { snMspsReport 90 } -- --------------------------------------------- -- MIB module-specific TRAP definitions -- (SN-MSPS-REPORT-MIB) -- --------------------------------------------- snMspsTrapPowerLine1Down NOTIFICATION-TYPE STATUS current DESCRIPTION "Power down on line L1." ::= { snMspsTrapPrefix 1851 } snMspsTrapPowerLine1Up NOTIFICATION-TYPE STATUS current DESCRIPTION "Power up on line L1." ::= { snMspsTrapPrefix 1852 } snMspsTrapPowerLine2Down NOTIFICATION-TYPE STATUS current DESCRIPTION "Power down on line L2." ::= { snMspsTrapPrefix 1853 } snMspsTrapPowerLine2Up NOTIFICATION-TYPE STATUS current DESCRIPTION "Power up on line L2." ::= { snMspsTrapPrefix 1854 } snMspsTrapChangedFaultState NOTIFICATION-TYPE STATUS current DESCRIPTION "Device changed fault state." ::= { snMspsTrapPrefix 1855 } snMspsTrapPoEDown NOTIFICATION-TYPE STATUS current DESCRIPTION "Power down on line L3 (PoE)." ::= { snMspsTrapPrefix 1856 } snMspsTrapPoEUp NOTIFICATION-TYPE STATUS current DESCRIPTION "Power up on line L3 (PoE)." ::= { snMspsTrapPrefix 1857 } snMspsTrapEnvData NOTIFICATION-TYPE STATUS current DESCRIPTION "EnvData Warnings." ::= { snMspsTrapPrefix 1860 } snMspsTrapServiceInformation NOTIFICATION-TYPE OBJECTS { snMspsReportServiceInformation } STATUS current DESCRIPTION "Serivce Information." ::= { snMspsTrapPrefix 1861 } snMspsTrapCLIScriptFileStatus NOTIFICATION-TYPE STATUS current DESCRIPTION "EnvData Warnings." ::= { snMspsTrapPrefix 1862 } snMspsTrapConfigurationChange NOTIFICATION-TYPE STATUS current DESCRIPTION "EnvData Warnings." ::= { snMspsTrapPrefix 1863 } -- snMspsSyslogClient 1 reserved snMspsSyslogTimeStamp OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Currently this object is not used. Timestamp is a mandatory field in Syslog Message format" DEFVAL { enable } ::= { snMspsSyslogClient 2 } snMspsSyslogConsoleLog OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is for enabling or disabling the console log option. When enabled, the messages (log and email alert messages) sent to the server will be displayed in the console also. When disabled,the messages will just be sent to the servers and not be displayed in the console." DEFVAL { enable } ::= { snMspsSyslogClient 3 } snMspsSyslogSysBuffers OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of log buffers to be allocated in the system" DEFVAL { 50 } ::= { snMspsSyslogClient 4 } snMspsSyslogSmtpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the mail server Port to be used for sending email alerts. By default the the port is 25" ::= { snMspsSyslogClient 5 } -- snMspsSyslogConfigTable -- This table is for configuring the log level options for the module. snMspsSyslogConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSyslogConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring module specific log levels." ::= { snMspsSyslogClient 6 } snMspsSyslogConfigEntry OBJECT-TYPE SYNTAX SnMspsSyslogConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing logging level options for a particular module." INDEX { snMspsSyslogConfigModule } ::= { snMspsSyslogConfigTable 1 } SnMspsSyslogConfigEntry ::= SEQUENCE { snMspsSyslogConfigModule INTEGER, snMspsSyslogConfigLogLevel INTEGER } snMspsSyslogConfigModule OBJECT-TYPE SYNTAX INTEGER{ web(1), -- For WEB module msr(2), -- For MSR module tftp(3), -- For TFTP module cli(4) -- For CLI module } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the module for which the log level option has to be configured." ::= { snMspsSyslogConfigEntry 1 } snMspsSyslogConfigLogLevel OBJECT-TYPE SYNTAX INTEGER{ emergency(0), -- For logging messages that -- are equivalent to panic -- condition. alert(1), -- For logging messages that -- require immediate attention. critical(2), -- For logging critical errors. error(3), -- For logging error messages. warning(4), -- For logging warning messages. notice(5), -- For logging messages that -- require attention -- and not errors. info(6), -- For logging informational -- messages. debug(7) -- For logging debug messages. } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the log level option to be set for a specific module." ::= { snMspsSyslogConfigEntry 2 } snMspsSyslogFacility OBJECT-TYPE SYNTAX INTEGER { local0(128), -- Reserved local use local1(136), -- Reserved local use local2(144), -- Reserved local use local3(152), -- Reserved local use local4(160), -- Reserved local use local5(168), -- Reserved local use local6(176), -- Reserved local use local7(184) -- Reserved local use } MAX-ACCESS read-write STATUS current DESCRIPTION "The Syslog standard facilities. The facility to be used when sending Syslog messages to this server." DEFVAL { local0 } ::= { snMspsSyslogClient 7 } --snMspsSyslogRole --This scalar for configuring syslog role snMspsSyslogRole OBJECT-TYPE SYNTAX INTEGER { device(1), relay(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog supports two type of roles one is Device and other is Relay Device can generate and forward the syslog message Relay can receive , generate and forward the syslog messages Relay check whether the received packet is as per BSD Syslog format if not relay makes the message to BSD Syslog format and forward Default role is device." DEFVAL { device } ::= { snMspsSyslogClient 8 } --snMspsSyslogLogFile --This scalar for enabling local storage snMspsSyslogLogFile OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog supports storing of syslog messages in the file as configured by admin This object is used to enable or disable the syslog local storage By default the local storage option is disabled." DEFVAL {disable } ::= { snMspsSyslogClient 9 } --snMspsSyslogMail --This scalar for enabling mail option snMspsSyslogMail OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog supports sending syslog message to any mail-id as configured by the admin This object is used to enable or disable the syslog mail storage By default the syslog mail option is disabled." DEFVAL {disable } ::= { snMspsSyslogClient 10 } --snMspsSyslogProfile --This scalar for setting the syslog profile. snMspsSyslogProfile OBJECT-TYPE SYNTAX INTEGER { raw(1), cooked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Beep supports two types of profile. One is raw other is cooked profile. This object is used to set the profile for beep By default the beep profile is raw." DEFVAL {raw} ::= { snMspsSyslogClient 11 } --snMspsSyslogRelayPort --This scalar for setting the syslog port in relay for receiving --syslog messages from other relay/device. snMspsSyslogRelayPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure port in which the relay listens Irrespective of the transport type, the relay opens the socket and listen on the port configured here. By default the relay will listen on port 514." DEFVAL {514} ::= { snMspsSyslogClient 12} --snMspsSyslogRelayTransType --This scalar for setting the syslog relay transport type. snMspsSyslogRelayTransType OBJECT-TYPE SYNTAX INTEGER { udp(1), tcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Relay supports UDP and TCP transport type.When the transport type is configured as UDP, relay receives syslog messages via UDP socket.When the transport type is configured as TCP, relay receives syslog message via TCP socket." DEFVAL {udp} ::= { snMspsSyslogClient 13 } --snMspsSyslogFileNameOne -- This Scalar is to configure file name for syslog local storage snMspsSyslogFileNameOne OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog can store the messages locally in three different files.This scalar is to get the file name" ::= { snMspsSyslogClient 14 } --snMspsSyslogFileNameTwo -- This Scalar is to configure file name for syslog local storage snMspsSyslogFileNameTwo OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog can store the messages locally in three different files.This scalar is to get the file name" ::= { snMspsSyslogClient 15 } --snMspsSyslogFileNameThree -- This Scalar is to configure file name for syslog local storage snMspsSyslogFileNameThree OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog can store the messages locally in three different files.This scalar is to get the file name" ::= { snMspsSyslogClient 16 } -- snMspsSyslogFileTable -- This table is for configuring the file table snMspsSyslogFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSyslogFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing entries of priority and filename. Both priority and file name is considered as index " ::= { snMspsSyslogClient 17 } snMspsSyslogFileEntry OBJECT-TYPE SYNTAX SnMspsSyslogFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing entries of priority,file name. Both priority and file name is considered as index" INDEX { snMspsSyslogFilePriority, snMspsSyslogFileName } ::= { snMspsSyslogFileTable 1 } SnMspsSyslogFileEntry ::= SEQUENCE { snMspsSyslogFilePriority Integer32, snMspsSyslogFileName DisplayString, snMspsSyslogFileRowStatus RowStatus } snMspsSyslogFilePriority OBJECT-TYPE SYNTAX Integer32(0..191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Object specifies the priority for which it should be written in file. Priority value ranges from 0 to 191" ::= { snMspsSyslogFileEntry 1 } snMspsSyslogFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the file name to which syslog message is written." ::= { snMspsSyslogFileEntry 2 } snMspsSyslogFileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Status of the File Entry." ::= {snMspsSyslogFileEntry 3} snMspsSyslogLogSrvAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Currently this object is is not used. Instead snMspsSyslogFwdServerIP is used for configuring syslog server IP for remote logging. " ::= { snMspsSyslogClient 18 } -- snMspsSyslogClient 19 reserved -- snMspsSyslogFwdTable -- This table is for configuring the Logging server forward table snMspsSyslogFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSyslogFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing entries of priority,server address type, server address, port through which it can send and tranport type." ::= { snMspsSyslogClient 20 } snMspsSyslogFwdEntry OBJECT-TYPE SYNTAX SnMspsSyslogFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing index as priority , server address type and server address." INDEX { snMspsSyslogFwdPriority,snMspsSyslogFwdAddressType,snMspsSyslogFwdServerIP} ::= { snMspsSyslogFwdTable 1 } SnMspsSyslogFwdEntry ::= SEQUENCE { snMspsSyslogFwdPriority Integer32, snMspsSyslogFwdAddressType InetAddressType, snMspsSyslogFwdServerIP InetAddress, snMspsSyslogFwdPort Integer32, snMspsSyslogFwdTransType INTEGER, snMspsSyslogFwdRowStatus RowStatus } snMspsSyslogFwdPriority OBJECT-TYPE SYNTAX Integer32(0..191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the priority which is to be forwarded to the desired server. Priority can take the value from 0 to 191." ::= { snMspsSyslogFwdEntry 1 } snMspsSyslogFwdAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Address type of server.Address type shall be ipv4 or ipv6." ::= { snMspsSyslogFwdEntry 2 } snMspsSyslogFwdServerIP OBJECT-TYPE SYNTAX InetAddress(SIZE(4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the ServerIP to which the syslog shall be forwarded." ::= { snMspsSyslogFwdEntry 3 } snMspsSyslogFwdPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Port through which it can send the syslog message. By default the the port is 514" DEFVAL { 514 } ::= { snMspsSyslogFwdEntry 4 } snMspsSyslogFwdTransType OBJECT-TYPE SYNTAX INTEGER { udp (0), tcp (1), beep (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Transport type using which it can send syslog message. By default the tranport type is udp" DEFVAL { udp } ::= { snMspsSyslogFwdEntry 5 } snMspsSyslogFwdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Status of the Fwd Entry." ::= {snMspsSyslogFwdEntry 6} snMspsSyslogSmtpSrvAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Currently this object is not used. snMspsSyslogMailServAdd is used for specifing the mail server IP to be used for sending email alerts." ::= { snMspsSyslogClient 21 } snMspsSyslogSmtpRcvrMailId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Currently this object is not used. snMspsSyslogRxMailId is used for specifing the receiver mail ID for email alerts." DEFVAL { "admin@futsoft.com" } ::= { snMspsSyslogClient 22 } snMspsSyslogSmtpSenderMailId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the sender mail ID for email alerts." ::= { snMspsSyslogClient 23 } -- snMspsSyslogMailTable -- This table is for configuring the Mail table snMspsSyslogMailTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSyslogMailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing entries of priority,mail server address type,mail server address and receiver mail id" ::= { snMspsSyslogClient 24 } snMspsSyslogMailEntry OBJECT-TYPE SYNTAX SnMspsSyslogMailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mail Table contains index as priority , mail server address type and mail server address." INDEX { snMspsSyslogMailPriority, snMspsSyslogMailServAddType , snMspsSyslogMailServAdd } ::= { snMspsSyslogMailTable 1 } SnMspsSyslogMailEntry ::= SEQUENCE { snMspsSyslogMailPriority Integer32, snMspsSyslogMailServAddType InetAddressType, snMspsSyslogMailServAdd InetAddress, snMspsSyslogRxMailId DisplayString, snMspsSyslogMailRowStatus RowStatus, snMspsSyslogMailPort Unsigned32, snMspsSyslogMailSender DisplayString, snMspsSyslogMailUsername DisplayString, snMspsSyslogMailPassword DisplayString, snMspsSyslogMailSecurity INTEGER } snMspsSyslogMailPriority OBJECT-TYPE SYNTAX Integer32(0..191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the priority which is to be mailed. Priority can be in the range 0 to 191" ::= { snMspsSyslogMailEntry 1 } snMspsSyslogMailServAddType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Mail Server Address Type. Address type can be ipv4 or ipv6" ::= { snMspsSyslogMailEntry 2 } snMspsSyslogMailServAdd OBJECT-TYPE SYNTAX InetAddress(SIZE(4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the Mail Server ip. Server Address can be ipv4 or ipv6" ::= { snMspsSyslogMailEntry 3 } snMspsSyslogRxMailId OBJECT-TYPE SYNTAX DisplayString (SIZE(1..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Currently this object is not used. snMspsSyslogMailReceiverTable is used for specifing the receiver mail ID for email alerts" ::= { snMspsSyslogMailEntry 4 } snMspsSyslogMailRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies RowStatus of the Mail Entry." ::= {snMspsSyslogMailEntry 5} snMspsSyslogMailPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port of the Mail Entry. By default the port is 25" DEFVAL { 25 } ::= {snMspsSyslogMailEntry 8} snMspsSyslogMailSender OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the sender mail ID for the Mail Entry." ::= { snMspsSyslogMailEntry 11 } snMspsSyslogMailUsername OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the username for the Mail Entry." ::= { snMspsSyslogMailEntry 14 } snMspsSyslogMailPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the password for the Mail Entry." ::= { snMspsSyslogMailEntry 17 } snMspsSyslogMailSecurity OBJECT-TYPE SYNTAX INTEGER { none(0), ssltls(1), starttls(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the security for the Mail Entry." DEFVAL { 1 } ::= { snMspsSyslogMailEntry 20 } -- snMspsSyslogMailReceiverTable -- This table is for configuring the Mail receiver table snMspsSyslogMailReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSyslogMailReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing receiver entries for mail service" ::= { snMspsSyslogClient 25 } snMspsSyslogMailReceiverEntry OBJECT-TYPE SYNTAX SnMspsSyslogMailReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mail receiver table contains index as priority , mail server address type, mail server address and Index." INDEX { snMspsSyslogMailReceiverServerPriority, snMspsSyslogMailReceiverServerAddressType, snMspsSyslogMailReceiverServerAddress, snMspsSyslogMailReceiverIndex } ::= { snMspsSyslogMailReceiverTable 1 } SnMspsSyslogMailReceiverEntry ::= SEQUENCE { snMspsSyslogMailReceiverServerPriority Integer32, snMspsSyslogMailReceiverServerAddressType InetAddressType, snMspsSyslogMailReceiverServerAddress InetAddress, snMspsSyslogMailReceiverIndex INTEGER, snMspsSyslogMailReceiverMailAddress DisplayString, snMspsSyslogMailReceiverEnabled INTEGER, snMspsSyslogMailReceiverRowStatus RowStatus } snMspsSyslogMailReceiverServerPriority OBJECT-TYPE SYNTAX Integer32(0..191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents snMspsSyslogMailPriority" ::= { snMspsSyslogMailReceiverEntry 1 } snMspsSyslogMailReceiverServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents snMspsSyslogMailServAddType" ::= { snMspsSyslogMailReceiverEntry 2 } snMspsSyslogMailReceiverServerAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents snMspsSyslogMailServAdd" ::= { snMspsSyslogMailReceiverEntry 3 } snMspsSyslogMailReceiverIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index variable of snMspsSyslogMailReceiverTable." ::= { snMspsSyslogMailReceiverEntry 4 } snMspsSyslogMailReceiverMailAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(1..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for specifing the receiver mail ID for email alerts" ::= { snMspsSyslogMailReceiverEntry 5 } snMspsSyslogMailReceiverEnabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object informs whether the entry is active or inactive" DEFVAL {disable } ::= { snMspsSyslogMailReceiverEntry 6 } snMspsSyslogMailReceiverRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies RowStatus of the Receiver Entry." ::= {snMspsSyslogMailReceiverEntry 100} TunnelStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is set to 'tunnel', the L2 protocol packets received on a particular port will be transparently transmitted in the provider network and will not be processed in the Provider Bridges/Provider Edge Bridges. When the option is set to 'discard', the L2 protocol packets received over a particular port will not be processed and discarded." SYNTAX INTEGER { peer(1), tunnel(2), discard(3) } -- ------------------------------------------------------------- -- Dynamic Group Registration Table -- ------------------------------------------------------------- -- snMspsVlan 1-3 reserved snMspsDot1qTpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qTpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. This table maintains context ID as one more index to support Multiple Instances." ::= { snMspsVlan 4 } snMspsDot1qTpGroupEntry OBJECT-TYPE SYNTAX SnMspsDot1qTpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. The subset of these ports learnt dynamically is also provided." INDEX { dot1qVlanIndex, snMspsDot1qTpGroupAddress, snMspsDot1qTpPort } ::= { snMspsDot1qTpGroupTable 1 } SnMspsDot1qTpGroupEntry ::= SEQUENCE { snMspsDot1qTpGroupAddress MacAddress, snMspsDot1qTpPort Integer32, snMspsDot1qTpGroupIsLearnt TruthValue } snMspsDot1qTpGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination Group MAC address in a frame to which this entry's filtering information applies." ::= { snMspsDot1qTpGroupEntry 1 } snMspsDot1qTpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of the port for which this entry applies." ::= { snMspsDot1qTpGroupEntry 2 } snMspsDot1qTpGroupIsLearnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the port is statically configured or a dynamic member of the Group address learnt through GMRP." ::= { snMspsDot1qTpGroupEntry 3 } -- ------------------------------------------------------------- -- END OF Dynamic Group Registration Table -- ------------------------------------------------------------- -- snMspsVlan 5-7 reserved snMspsDot1qVlanStaticPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanStaticPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information of tagged, untagged and forbidden ports for each VLAN." ::= { snMspsVlan 8 } snMspsDot1qVlanStaticPortConfigEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanStaticPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding information about a port, Whether it is a member or a forbidden member." INDEX { dot1qVlanIndex, snMspsDot1qTpPort } ::= { snMspsDot1qVlanStaticPortConfigTable 1 } SnMspsDot1qVlanStaticPortConfigEntry ::= SEQUENCE { snMspsDot1qVlanStaticPort INTEGER } snMspsDot1qVlanStaticPort OBJECT-TYPE SYNTAX INTEGER { addTagged(1), addUntagged(2), addForbidden(3), delTagged(4), delUntagged(5), delForbidden(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addTagged' - to add the port in the tagged portlist. 'addUntagged' - to add the port in the untagged portlist. 'addForbidden' - to add the port in the forbidden portlist. 'delTagged' - to delete the port from the tagged portlist. 'delUntagged' - to delete the port from the untagged portlist. 'delForbidden' - to delete the port from the forbidden portlist." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { snMspsDot1qVlanStaticPortConfigEntry 1 } snMspsDot1qStaticAllowedToGoTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qStaticAllowedToGoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple Instances." REFERENCE "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" ::= { snMspsVlan 9 } snMspsDot1qStaticAllowedToGoEntry OBJECT-TYPE SYNTAX SnMspsDot1qStaticAllowedToGoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a port, Whether it is an AllowedToGoTo member or not." INDEX { dot1qFdbId, dot1qStaticUnicastAddress, dot1qStaticUnicastReceivePort, snMspsDot1qTpPort } ::= { snMspsDot1qStaticAllowedToGoTable 1 } SnMspsDot1qStaticAllowedToGoEntry ::= SEQUENCE { snMspsDot1qStaticAllowedIsMember TruthValue } snMspsDot1qStaticAllowedIsMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is an allowedToGoTo member." REFERENCE "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" ::= { snMspsDot1qStaticAllowedToGoEntry 1 } -- ------------------------------------------------------------- -- The Static (Destination-Address Filtering) Database -- ------------------------------------------------------------- snMspsMIDot1qStaticUnicastExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMIDot1qStaticUnicastExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only. This table maintains context ID as one more index to support Multiple Instances." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7, ISO/IEC 15802-3 Section 7.9.1" ::= { snMspsVlan 10 } snMspsMIDot1qStaticUnicastExtnEntry OBJECT-TYPE SYNTAX SnMspsMIDot1qStaticUnicastExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded." AUGMENTS { dot1qStaticUnicastEntry } ::= { snMspsMIDot1qStaticUnicastExtnTable 1 } SnMspsMIDot1qStaticUnicastExtnEntry ::= SEQUENCE { snMspsMIDot1qStaticConnectionIdentifier MacAddress } snMspsMIDot1qStaticConnectionIdentifier OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object is to associate the backbone MAC address of the peer backbone edge bridge with customer Mac addresses that can be reached through the peer backbone edge bridge." ::= { snMspsMIDot1qStaticUnicastExtnEntry 1 } -- ------------------------------------------------------------- -- END OF The Static (Destination-Address Filtering) Database -- ------------------------------------------------------------- snMspsDot1qForwardAllStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qForwardAllStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to maintain the status of static and forbidden portlist required in ForwardAll table for VLAN. This table maintains context ID as one more index to support Multiple Instances." ::= { snMspsVlan 11 } snMspsDot1qForwardAllStatusEntry OBJECT-TYPE SYNTAX SnMspsDot1qForwardAllStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to specify the status of static and forbidden portlist in ForwardAll Table." INDEX { dot1qVlanIndex } ::= { snMspsDot1qForwardAllStatusTable 1 } SnMspsDot1qForwardAllStatusEntry ::= SEQUENCE { snMspsDot1qForwardAllRowStatus RowStatus } snMspsDot1qForwardAllRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardAll). To fill the static and forbidden portlist, we have to set the rowstatus as 'NOT_IN_SERVICE' and set the appropriate port in the snMspsDot1qForwardUnregPortConfigTable and set the rowstatus as 'ACTIVE' to make the portlist available." ::= { snMspsDot1qForwardAllStatusEntry 1 } snMspsDot1qForwardAllPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qForwardAllPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the forwarding information of static ports and forbidden ports for each VLAN. This table maintains context ID as one more index to support Multiple Instances." REFERENCE "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" ::= { snMspsVlan 12 } snMspsDot1qForwardAllPortConfigEntry OBJECT-TYPE SYNTAX SnMspsDot1qForwardAllPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding information about a port, Whether it is a member or a forbidden member." INDEX { dot1qVlanIndex, snMspsDot1qTpPort } ::= { snMspsDot1qForwardAllPortConfigTable 1 } SnMspsDot1qForwardAllPortConfigEntry ::= SEQUENCE { snMspsDot1qForwardAllPort INTEGER } snMspsDot1qForwardAllPort OBJECT-TYPE SYNTAX INTEGER { addMember(1), addForbidden(2), delMember(3), delForbidden(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-list. 'addForbidden' - to add the port in the forbidden member-list. 'delMember' - to remove the port from the static member-list. 'delForbidden' - to remove the port from the forbidden member-list." ::= { snMspsDot1qForwardAllPortConfigEntry 1 } -- snMspsVlan 13-14 reserved snMspsDot1qForwardUnregStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to maintain the status of static and forbidden portlist required in ForwardUnreg table for VLAN. This table maintains context ID as one more index to support Multiple Instances." ::= { snMspsVlan 15 } snMspsDot1qForwardUnregStatusEntry OBJECT-TYPE SYNTAX SnMspsDot1qForwardUnregStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to specify the status of static and forbidden portlist in ForwardUnreg table." INDEX { dot1qVlanIndex } ::= { snMspsDot1qForwardUnregStatusTable 1 } SnMspsDot1qForwardUnregStatusEntry ::= SEQUENCE { snMspsDot1qForwardUnregRowStatus RowStatus } snMspsDot1qForwardUnregRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardUnreg). To fill the static and forbidden portlist, we have to set the rowstatus as 'NOT_IN_SERVICE' and set the appropriate port in the snMspsDot1qForwardUnregPortConfigTable and set the rowstatus as 'ACTIVE' to make the portlist available." ::= { snMspsDot1qForwardUnregStatusEntry 1 } snMspsDot1qForwardUnregPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information of static ports and forbidden ports to which forwarding of multicast group-addressed frames for which there is no more specific forwarding information applies (per VLAN). This table maintains context ID as one more index to support Multiple Instances." REFERENCE "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" ::= { snMspsVlan 16 } snMspsDot1qForwardUnregPortConfigEntry OBJECT-TYPE SYNTAX SnMspsDot1qForwardUnregPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding information about a port, Whether it is a member or a forbidden member." INDEX {dot1qVlanIndex, snMspsDot1qTpPort } ::= { snMspsDot1qForwardUnregPortConfigTable 1 } SnMspsDot1qForwardUnregPortConfigEntry ::= SEQUENCE { snMspsDot1qForwardUnregPort INTEGER } snMspsDot1qForwardUnregPort OBJECT-TYPE SYNTAX INTEGER { addMember(1), addForbidden(2), delMember(3), delForbidden(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-list. 'addForbidden' - to add the port in the forbidden member-list. 'delMember' - to remove the port from the static member-list. 'delForbidden' - to remove the port from the forbidden member-list." ::= { snMspsDot1qForwardUnregPortConfigEntry 1 } -- snMspsVlan 17 reserved snMspsDot1qStaticMcastPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qStaticMcastPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing egress and forbidden ports for static multicast entry. This table maintains context ID as one more index to support Multiple Instance." ::= { snMspsVlan 18 } snMspsDot1qStaticMcastPortEntry OBJECT-TYPE SYNTAX SnMspsDot1qStaticMcastPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a port, Whether it is a member or a forbidden member." INDEX { dot1qVlanIndex, dot1qStaticMulticastAddress, dot1qStaticMulticastReceivePort, snMspsDot1qTpPort } ::= { snMspsDot1qStaticMcastPortTable 1 } SnMspsDot1qStaticMcastPortEntry ::= SEQUENCE { snMspsDot1qStaticMcastPort INTEGER } snMspsDot1qStaticMcastPort OBJECT-TYPE SYNTAX INTEGER { addMember(1), addForbidden(2), delMember(3), delForbidden(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is a member or a forbidden member in the static multicast entry. 'addMember' - to add the port in the egress member-list. 'addForbidden' - to add the port in the forbidden member-list. 'delMember' - to remove the port from the egress member-list. 'delForbidden' - to remove the port from the forbidden member-list." ::= { snMspsDot1qStaticMcastPortEntry 1 } snMspsDot1qVlanWildCardTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanWildCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wild card vlan (Id : 0xFFF) static filtering information will be used for all Vlans for which there is no specific Static filtering exists in dot1qStaticUnicastTable or dot1qStaticMulticastTable." ::= { snMspsVlan 19 } snMspsDot1qVlanWildCardEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanWildCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WildCard vlan filtering Information configured into device by management to which frames received from any port and for any vlan containing this wild card mac address as destination address and for which there is no static filtering information are allowed to be forwarded." INDEX { snMspsDot1qVlanWildCardMacAddress } ::= { snMspsDot1qVlanWildCardTable 1 } SnMspsDot1qVlanWildCardEntry ::= SEQUENCE { snMspsDot1qVlanWildCardMacAddress MacAddress, snMspsDot1qVlanWildCardEgressPorts PortList, snMspsDot1qVlanWildCardRowStatus RowStatus } snMspsDot1qVlanWildCardMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcast address." ::= { snMspsDot1qVlanWildCardEntry 1 } snMspsDot1qVlanWildCardEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for dot1qFutureVlanWildCardMacAddress address must be forwarded, if there is no specific static filtering entry exist for this MAC." ::= { snMspsDot1qVlanWildCardEntry 2 } snMspsDot1qVlanWildCardRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of the entry." ::= { snMspsDot1qVlanWildCardEntry 3 } snMspsMIDot1qVlanWildCardPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMIDot1qVlanWildCardPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table containing ports to which frames received from a specific port and destined for snMspsMIDot1qVlanWildCardMacAddress must be forwarded, if there is no specific static filtering entry exist for this MAC." ::= { snMspsVlan 20 } snMspsMIDot1qVlanWildCardPortEntry OBJECT-TYPE SYNTAX SnMspsMIDot1qVlanWildCardPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WildCard vlan filtering Information configured into device by management specifying set of ports to which frames received from any port and for any vlan containing snMspsMIDot1qVlanWildCardMacAddress mac address as destination address and for which there is no static filtering information are allowed to be forwarded." INDEX { snMspsDot1qVlanWildCardMacAddress, snMspsDot1qTpPort } ::= { snMspsMIDot1qVlanWildCardPortTable 1 } SnMspsMIDot1qVlanWildCardPortEntry ::= SEQUENCE { snMspsMIDot1qVlanIsWildCardEgressPort TruthValue } snMspsMIDot1qVlanIsWildCardEgressPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is an egress port of wildcard entry." ::= { snMspsMIDot1qVlanWildCardPortEntry 1 } -- SCALAR BEGIN -- snMspsVlan 21-24 reserved snMspsDot1qVlanStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status requested by management for the Vlan feature. The value enabled(1) indicates that Vlan should be enabled in the device on all ports. The value disabled(2) indicates that Vlan should be disabled in the device on all ports. The object can be set to disabled if and only if, dot1qGvrpStatus and dot1dGmrpStatus are disabled. The object should NOT be enabled before setting 'dot1qVlanType'. Setting this object will affect the operational status of the VLAN module (dot1qFutureVlanOperStatus)." ::= { snMspsVlan 25 } snMspsDot1qVlanMacBasedOnAllPorts OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is only used to enable/disable the mac based type on all ports of dot1qVlanPortMacBasedClassification" ::= { snMspsVlan 26 } snMspsDot1qVlanPortProtoBasedOnAllPorts OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is only used to enable/disable the port protocol based type on all ports of snMspsDot1qVlanPortPortProtoBasedClassification" ::= { snMspsVlan 27 } -- snMspsVlan 28 reserved snMspsDot1qVlanShutdownStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative shutdown status requested by management for Vlan The value true(1) indicates that Vlan should be shutdown in the device on all ports. All memory will be released. The value false(2) indicates that Vlan should be active in the device on all ports." DEFVAL { false } ::= { snMspsVlan 29 } snMspsDot1qVlanBaseBridgeMode OBJECT-TYPE SYNTAX INTEGER { dot1dTransparentMode(1), dot1qVlanMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates base bridge mode of the device. Setting the value to transparent mode will make switch behave according to IEEE 802.1D implementation. Setting the value to VLAN mode will make switch behave according to IEEE 802.1Q implementation" ::= { snMspsVlan 30 } -- snMspsVlan 31-32 reserved snMspsDot1qVlanLearningMode OBJECT-TYPE SYNTAX INTEGER { ivl(1), svl(2), hybrid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Type of VLAN learning mode. When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unicast configurations associated with old fid will get deleted." DEFVAL { ivl } ::= { snMspsVlan 33 } snMspsDot1qVlanHybridTypeDefault OBJECT-TYPE SYNTAX INTEGER { ivl(1), svl(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default learning mode of the switch if dot1qVlanLearningMode is hvl (3). When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unicast configurations associated with old fid will get deleted." DEFVAL { ivl } ::= { snMspsVlan 34 } snMspsDot1qVlanOperStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates that Vlan module is currently disabled in the device." ::= { snMspsVlan 35 } snMspsDot1qGvrpOperStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates that GVRP module is currently disabled in the device." ::= { snMspsVlan 36 } snMspsDot1qGmrpOperStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the GMRP module. The value enabled(1) indicates that GMRP module is currently enabled in the device. The value disabled(2) indicates that GMRP module is currently disabled in the device." ::= { snMspsVlan 37 } --snMspsVlan 38-40 reserved -- ---------------------------------------------------------------------------- -- Vlan Port Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing the port type information." ::= { snMspsVlan 41 } snMspsDot1qVlanPortEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the type of the port." INDEX { snMspsDot1qVlanPort } ::= { snMspsDot1qVlanPortTable 1 } SnMspsDot1qVlanPortEntry ::= SEQUENCE { snMspsDot1qVlanPort Integer32, snMspsDot1qVlanPortType INTEGER, snMspsDot1qVlanPortMacBasedClassification EnabledStatus, snMspsDot1qVlanPortPortProtoBasedClassification EnabledStatus, snMspsDot1qVlanFilteringUtilityCriteria INTEGER, snMspsDot1qVlanPortProtected TruthValue, snMspsDot1qVlanPortSubnetBasedClassification EnabledStatus } snMspsDot1qVlanPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of the port for which this entry applies." ::= { snMspsDot1qVlanPortEntry 1 } snMspsDot1qVlanPortType OBJECT-TYPE SYNTAX INTEGER { accessPort (1), trunkPort (2), hybridPort (3), hostPort (4), promiscuousPort (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk port, port is added as member of all the existing Vlans and also for any new vlan created. When configured as hybrid port, the port can send or accept both tagged and untagged frames. hostPort, promiscuousPort are types of port in PVLAN domain. Behaviour of host port varies based on the secondary vlan to which it is configured as member port. If a host port is a member port of an isolated VLAN, traffic from the host port is sent only to the promiscuous port of the Private VLAN and the trunk port. If a host port is a member port of the community VLAN, traffic from the port can be sent only to other ports of the community VLAN , trunk port and promiscuous port of the private VLAN. A host port can be associated with only one secondary vlan and with the associated primary vlan. The PVID of host port will be set the ID of the secondary vlan to which it belongs to.If a host port is member port of primary vlan, but is not member port of any secondary vlan, then its PVID will be set to primary vlan id. When a port is configured as a hostPort or promiscuousPort, ingress filtering will be enabled on that port. Also ingress filtering cannot be disabled on hostPort and promiscuousPort. Promiscuous ports should be configured as member port of primary vlan and member port of all secondary vlans associated with that primary vlan. The PVID of promiscuous port will be set as the ID of the primary vlan to which it belongs to. Host and promiscuous ports should be configured as untagged members of primary/secondary vlans. When a access/hybrid port is configured as a member port of a primary/secondary vlan, it becomes a hostPort automatically. When the type of the port is changed from promiscuous/host to access/hybrid port, the port gets removed from the associated PVLAN domain. Only considered if device supports corresponding functionality, otherwise set operation will fail with an inconsistentValue error." DEFVAL { hybridPort } ::= { snMspsDot1qVlanPortEntry 2 } snMspsDot1qVlanPortMacBasedClassification OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Object to expilicitly enable/disable the Mac based Classification on port. This can be independently set without any dependency in available configuration of snMspsDot1qVlanMacBasedOnAllPorts " ::= { snMspsDot1qVlanPortEntry 3 } snMspsDot1qVlanPortPortProtoBasedClassification OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Object to expilicitly enable/disable the port and protocol Classification on port. This can be independently set without any dependency in available configuration of snMspsDot1qVlanPortProtoBasedOnAllPorts " ::= { snMspsDot1qVlanPortEntry 4 } snMspsDot1qVlanFilteringUtilityCriteria OBJECT-TYPE SYNTAX INTEGER { default (1), enhanced (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Based on this object, learning on a port is decided. If default filtering utility Criteria is selected on a port, then learning of source mac from a received packet on that port will be done only if there is atleast on member port in that vlan. If enhanced filtering utility criteria is selected on a port,then learning of source mac from a received packet on that port will be done if the following are satisfied: - if at least one VLAN that uses the FID includes the reception Port and at least one other Port with a Port State of Learning or Forwarding in its member set, and: o The operPointToPointMAC parameter is false for the reception Port; or o Ingress to the VLAN is permitted through a third Port. The third port can, but is not required to, be in the member set." DEFVAL { default } ::= { snMspsDot1qVlanPortEntry 5 } snMspsDot1qVlanPortProtected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true, will not be forwarded on this port." DEFVAL { false } ::= { snMspsDot1qVlanPortEntry 6 } snMspsDot1qVlanPortSubnetBasedClassification OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Object to expilicitly enable/disable the Subnet based Vlan Classification on port. This can be independently set without any dependency in available configuration of snMspsDot1qVlanSubnetBasedOnAllPorts. This object is not used in case of BCM chipsets." ::= { snMspsDot1qVlanPortEntry 7 } -- ---------------------------------------------------------------------------- -- END OF Vlan Port Table -- ---------------------------------------------------------------------------- -- ---------------------------------------------------------------------------- -- Vlan Mac Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanPortMacMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanPortMacMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information on Vlan-MAC address mapping." ::= { snMspsVlan 42 } snMspsDot1qVlanPortMacMapEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanPortMacMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry that contains Vlan-MAC address mapping." INDEX { snMspsDot1qVlanPort, snMspsDot1qVlanPortMacMapAddr } ::= { snMspsDot1qVlanPortMacMapTable 1 } SnMspsDot1qVlanPortMacMapEntry ::= SEQUENCE { snMspsDot1qVlanPortMacMapAddr MacAddress, snMspsDot1qVlanPortMacMapVid VlanId, snMspsDot1qVlanPortMacMapName DisplayString, snMspsDot1qVlanPortMacMapMcastBcastOption INTEGER, snMspsDot1qVlanPortMacMapRowStatus RowStatus } snMspsDot1qVlanPortMacMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mac address for which the Vlan mapping is present in the entry." ::= { snMspsDot1qVlanPortMacMapEntry 1 } snMspsDot1qVlanPortMacMapVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Vlan to which the mac address of this entry is mapped to." ::= { snMspsDot1qVlanPortMacMapEntry 2 } snMspsDot1qVlanPortMacMapName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name given to the mac-vlan entry." ::= { snMspsDot1qVlanPortMacMapEntry 3 } snMspsDot1qVlanPortMacMapMcastBcastOption OBJECT-TYPE SYNTAX INTEGER { allow(1), suppress(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable option for discarding/allowing Multicast/Broadcast Untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source Mac address as in the Mac Vlan entry will be dropped if mac based vlan is enabled on that port.The value suppress (2) indicates that Multicast/Broadcast frames with source Mac address as in the Mac Vlan entry will be processed if mac based vlan is enabled on that port" DEFVAL { allow } ::= { snMspsDot1qVlanPortMacMapEntry 4 } snMspsDot1qVlanPortMacMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of the entry." ::= { snMspsDot1qVlanPortMacMapEntry 5 } -- ---------------------------------------------------------------------------- -- END OF Vlan Mac Map Table -- ---------------------------------------------------------------------------- -- ---------------------------------------------------------------------------- -- Vlan Vlan-Fid Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanFidMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanFidMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the Filtering database identifier (FID) used by vlan's to make forwarding decisions. Vlan's can be mapped to use the same FID to share filtering information among them. This will cause the mapped vlan's to operate in shared vlan learning (SVL) mode. Vlan's mapped to a unique FID will operate in independent vlan learning mode (IVL). A SET operation on this table is allowed only when snMspsDotVlanLearningMode is hybrid. By default all vlan's will be mapped to the FID equal to their vlan id when snMspsDotVlanHybridTypeDefault is IVL. If the value of snMspsDotVlanHybridTypeDefault is SVL all vlan's are mapped to filtering database id 1." ::= { snMspsVlan 43 } snMspsDot1qVlanFidMapEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanFidMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry mapping VlanId to Filtering database id." INDEX { snMspsDot1qVlanIndex } ::= { snMspsDot1qVlanFidMapTable 1 } SnMspsDot1qVlanFidMapEntry ::= SEQUENCE { snMspsDot1qVlanIndex Unsigned32, snMspsDot1qVlanFid Unsigned32 } snMspsDot1qVlanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID for which filtering database information is available." ::= { snMspsDot1qVlanFidMapEntry 1 } snMspsDot1qVlanFid OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The Filtering database id (FID) that will be used by the vlan." ::= { snMspsDot1qVlanFidMapEntry 2 } -- ---------------------------------------------------------------------------- -- END OF Vlan Vlan-Fid Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the statistics on a per VLAN basis. It contains number of unicast, broadcast and unknown unicast packets flooded per VLAN." ::= { snMspsVlan 44 } snMspsDot1qVlanCounterEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains the VLAN statistics" INDEX { snMspsDot1qVlanIndex } ::= { snMspsDot1qVlanCounterTable 1 } SnMspsDot1qVlanCounterEntry ::= SEQUENCE { snMspsDot1qVlanCounterRxUcast Counter32, snMspsDot1qVlanCounterRxMcastBcast Counter32, snMspsDot1qVlanCounterTxUnknUcast Counter32, snMspsDot1qVlanCounterTxUcast Counter32, snMspsDot1qVlanCounterTxBcast Counter32 } snMspsDot1qVlanCounterRxUcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of unicast packets received in this VLAN." ::= { snMspsDot1qVlanCounterEntry 1 } snMspsDot1qVlanCounterRxMcastBcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of multicast/broadcast packets received in this VLAN." ::= { snMspsDot1qVlanCounterEntry 2 } snMspsDot1qVlanCounterTxUnknUcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of unknown unicast packets flooded in this VLAN." ::= { snMspsDot1qVlanCounterEntry 3 } snMspsDot1qVlanCounterTxUcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of known unicast packets forwarded in this VLAN." ::= { snMspsDot1qVlanCounterEntry 4 } snMspsDot1qVlanCounterTxBcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of broadcast packets forwarded in this VLAN." ::= { snMspsDot1qVlanCounterEntry 5 } snMspsDot1qVlanUnicastMacControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanUnicastMacControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per VLAN Unicast MAC address control information. The control information includes the status of unicast MAC address learning as well as restricting the number of unique entries learnt to a specified limit for the specified VLAN." ::= { snMspsVlan 45 } snMspsDot1qVlanUnicastMacControlEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanUnicastMacControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling the number of distinct unicast MAC addresses that can be learnt by a VLAN depending on whether learning is enabled or disabled for the specified VLAN." INDEX { snMspsDot1qVlanIndex } ::= { snMspsDot1qVlanUnicastMacControlTable 1 } SnMspsDot1qVlanUnicastMacControlEntry ::= SEQUENCE { snMspsDot1qVlanUnicastMacLimit Unsigned32, snMspsDot1qVlanAdminMacLearningStatus EnabledStatus, snMspsDot1qVlanOperMacLearningStatus EnabledStatus } snMspsDot1qVlanUnicastMacLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The Limiting value on the number of distinct unicast MAC addresses learnt in a VLAN. The lower limit and upper limit value that can be SET for this object is determined by the underlying hardware." ::= { snMspsDot1qVlanUnicastMacControlEntry 1 } snMspsDot1qVlanAdminMacLearningStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "A Truth value used to configure the unicast MAC learning Admin status for the VLAN to either be enabled (1) or disabled (2)." DEFVAL { enabled } ::= { snMspsDot1qVlanUnicastMacControlEntry 2 } snMspsDot1qVlanOperMacLearningStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A Truth value indicating the unicast MAC learning enabled/disabled Operational status for the specified VLAN. If the VLAN does not have any member port, then the Mac Learning Status for this VLAN will always be disabled, otherwise The Mac Learning status for this VLAN will take value from Admin Mac Learning status." ::= { snMspsDot1qVlanUnicastMacControlEntry 3 } snMspsDot1qVlanTpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extention to the dot1qTpFdbTable contains information about unicast entries only learned via pseudowire for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame." REFERENCE "" ::= { snMspsVlan 46 } snMspsDot1qVlanTpFdbEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the pseudowire on which MAC address was learned" AUGMENTS { dot1qTpFdbEntry } ::= { snMspsDot1qVlanTpFdbTable 1 } SnMspsDot1qVlanTpFdbEntry ::= SEQUENCE { snMspsDot1qVlanTpFdbPw Unsigned32, snMspsDot1qTpOldFdbPort INTEGER, snMspsDot1qConnectionIdentifier MacAddress } snMspsDot1qVlanTpFdbPw OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the entry was learned via the layer2 port. Non-zero value indicates that this value must be used for forwading irrespective of dot1qTpFdbPort" ::= { snMspsDot1qVlanTpFdbEntry 1 } snMspsDot1qTpOldFdbPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of Zero(0), so that the device walk doesn't break. It indicates the port through which the mac-address was learnt previously, while generating the source relearning trap." ::= { snMspsDot1qVlanTpFdbEntry 2 } snMspsDot1qConnectionIdentifier OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is to associate the backbone MAC address of the peer backbone edge brige with customer Mac addresses that can be reached through the peer backbone edge bridge." ::= { snMspsDot1qVlanTpFdbEntry 3 } snMspsDot1qVlanPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure VLAN priorization" ::= { snMspsVlan 47 } snMspsDot1qVlanPriorityEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION"" INDEX { snMspsDot1qVlanPriorityVid} ::= {snMspsDot1qVlanPriorityTable 1 } SnMspsDot1qVlanPriorityEntry ::= SEQUENCE { snMspsDot1qVlanPriorityVid INTEGER, snMspsDot1qVlanPriorityEnabled INTEGER, snMspsDot1qVlanPriority INTEGER } snMspsDot1qVlanPriorityVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN-ID" ::= { snMspsDot1qVlanPriorityEntry 1 } snMspsDot1qVlanPriorityEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable forcing of a given priority for all frames received on a certain VLAN" DEFVAL { disabled } ::= { snMspsDot1qVlanPriorityEntry 4 } snMspsDot1qVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority that is forced for all frames received on a certain VLAN" DEFVAL {0} ::= { snMspsDot1qVlanPriorityEntry 7 } snMspsDot1qVlanExt OBJECT IDENTIFIER ::= { snMspsVlan 48 } -- snMspsDot1qVlanExt 1-19 reserved for scalar -- ---------------------------------------------------------------------------- -- MSPS Vlan Extension Table -- ---------------------------------------------------------------------------- snMspsDot1qStVlanExtTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qStVlanExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension to dot1qVlanStaticTable VLAN table. This table contains the Private Vlan (PVLAN) related configurations. Only considered if device supports corresponding functionality, otherwise any set operation will fail with an inconsistentValue error and get will return empty. Entries cannot be created or deleted by user, whenever static vlan entry created in the table 'dot1qVlanStaticTable' user can configure corresponding private vlan properties in this table." ::= { snMspsDot1qVlanExt 20 } snMspsDot1qStVlanExtEntry OBJECT-TYPE SYNTAX SnMspsDot1qStVlanExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the Private Vlan configuration done for a given Vlan." INDEX { dot1qVlanIndex } ::= { snMspsDot1qStVlanExtTable 1 } SnMspsDot1qStVlanExtEntry ::= SEQUENCE { snMspsDot1qStVlanPVlanType INTEGER, snMspsDot1qStVlanPrimaryVid VlanIdOrNone } snMspsDot1qStVlanPVlanType OBJECT-TYPE SYNTAX INTEGER { normal (1), primary (2), isolated (3), community (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the Private vlan type for this vlan. normal - Vlan does not belong to any Private VLAN domain. primary - Primary vlan in a Private VLAN domain. isolated - Isolated vlan in a Private VLAN domain. Devices connected to host ports of this vlan, can not communicate with each other. For every isolated vlan, one primary vlan id should be configured. community - Community Vlan in a Private VLAN domain. Layer 2 behaviour for a community and normal vlan is same. For every community vlan, one primary vlan id should be configured. Configuration of this object is allowed only when VLAN is not active." DEFVAL { normal } ::= { snMspsDot1qStVlanExtEntry 1 } snMspsDot1qStVlanPrimaryVid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the primary vlan assoicated with this vlan. For primary and normal vlans, this object will have the value zero and configuring this object to non-zero value will not be allowed for them. For secondary vlans, this object identifies the associated primary vlan." DEFVAL { 0 } ::= { snMspsDot1qStVlanExtEntry 2 } snMspsDot1vObjects OBJECT IDENTIFIER ::= { snMspsVlan 49 } snMspsDot1vProtocolGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1vProtocolGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification." REFERENCE "IEEE 802.1v clause 8.6.4" ::= { snMspsDot1vObjects 1 } snMspsDot1vProtocolGroupEntry OBJECT-TYPE SYNTAX SnMspsDot1vProtocolGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping from a Protocol Template to a Protocol Group Identifier." INDEX { snMspsDot1vProtocolTemplateFrameType, snMspsDot1vProtocolTemplateProtocolValue, snMspsDot1vProtocolGroupId} ::= { snMspsDot1vProtocolGroupTable 1 } SnMspsDot1vProtocolGroupEntry ::= SEQUENCE { snMspsDot1vProtocolTemplateFrameType INTEGER, snMspsDot1vProtocolTemplateProtocolValue OCTET STRING, snMspsDot1vProtocolGroupId Integer32, snMspsDot1vProtocolGroupRowStatus RowStatus } snMspsDot1vProtocolTemplateFrameType OBJECT-TYPE SYNTAX INTEGER { ethernet (1), rfc1042 (2), snap8021H (3), snapOther (4), llcOther (5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template." REFERENCE "IEEE 802.1v clause 8.6.2" ::= { snMspsDot1vProtocolGroupEntry 1 } snMspsDot1vProtocolTemplateProtocolValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2 | 5)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 LSAP pair: first octet for DSAP and second octet for SSAP." REFERENCE "IEEE 802.1v clause 8.6.2" ::= { snMspsDot1vProtocolGroupEntry 2 } snMspsDot1vProtocolGroupId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a group of protocols that are associated together when assigning a VID to a frame." REFERENCE "IEEE 802.1v clause 8.6.3, 12.10.2.1" ::= { snMspsDot1vProtocolGroupEntry 3 } snMspsDot1vProtocolGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { snMspsDot1vProtocolGroupEntry 4 } -- snMspsVlan 50 reserved snMspsVlanTunnelObjects OBJECT IDENTIFIER ::= { snMspsVlan 51 } -- TUNNEL SCALAR BEGIN snMspsVlanTunnelBpduPri OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports." DEFVAL { 7 } ::= { snMspsVlanTunnelObjects 1 } snMspsVlanTunnelStpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer BPDUs received. This is the default behaviour in Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,BPDUs received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer STP BPDU.Otherwise, they will be treated as data packets. When the BPDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer STP BPDU. This is done only when when STP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 2 } snMspsVlanTunnelLacpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LACP packets received over this port. LACP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LACP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for LACP packets. This is done only when LACP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 3 } snMspsVlanTunnelDot1xAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for Dot1x packets tunneling. When Dot1x tunneling is enabled on a port, this MAC address will be used as the the destination MAC address for the customer Dot1x packets received with reserved address over this port. Dot1x packets received with this MAC address will be treated as data packets and not processed. When the tunneled Dot1x packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for Dot1x packets. This is done only when Dot1x protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 4 } snMspsVlanTunnelGvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GVRP PDUs received.This is the default behaviour in Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer GVRP PDUs.Otherwise, they will be treated as data packets. When the GVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer GVRP PDU. This is done only when when GVRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 5 } snMspsVlanTunnelGmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GMRP PDUs received over this port. Inside a given Network, GMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for GMRP PDUs.This is done only when GMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 6 } snMspsVlanTunnelMvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the received MVRP PDUs. Inside a given Network, packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer MVRP PDUs.Otherwise, they will be treated as data packets. When the MVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer MVRP PDU. This is done only when when MVRP protocol tunnel status is set to Tunnel on the outgoing port. Dropped otherwise." ::= { snMspsVlanTunnelObjects 10 } snMspsVlanTunnelMmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the MMRP PDUs received over this port. Inside a given Network, MMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled MMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for MMRP PDUs.This is done only when MMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { snMspsVlanTunnelObjects 11 } snMspsVlanTunnelIgmpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for IGMP packets tunneling . When IGMP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the IGMP packets received over this port. IGMP packets received with this MAC address will be treated as data packets and not processed. When the tunneled IGMP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for IGMP packets. This is done only when IGMP protocol tunnel status is set to Tunnel on the outgoing port." ::= { snMspsVlanTunnelObjects 12 } -- TUNNEL SCALAR END -- ---------------------------------------------------------------------------- -- Vlan Tunnel Table -- ---------------------------------------------------------------------------- snMspsVlanTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is supported only when the Bridge is configured in Provider Bridge (Q-in-Q) mode." ::= { snMspsVlanTunnelObjects 7 } snMspsVlanTunnelEntry OBJECT-TYPE SYNTAX SnMspsVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the tunnel information of the port." INDEX { snMspsVlanPort } ::= { snMspsVlanTunnelTable 1 } SnMspsVlanTunnelEntry ::= SEQUENCE { snMspsVlanPort Integer32, snMspsVlanTunnelStatus EnabledStatus } snMspsVlanPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { snMspsVlanTunnelEntry 1 } snMspsVlanTunnelStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Tunnelling is enabled or disabled on this port. snMspsVlanTunnelStatus can be set to `enabled` if and only if the Bridge mode is set to be `Provider Bridge Mode` and VLAN port type is set to 'accessPort'. Tunnelling can be enabled only on ports which are in 'dot1x force-authorised' state." DEFVAL { disabled } ::= { snMspsVlanTunnelEntry 2 } -- ---------------------------------------------------------------- -- Tunnel protocol configuration table -- ---------------------------------------------------------------- snMspsVlanTunnelProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP and MMRP) inside a given network." ::= { snMspsVlanTunnelObjects 8 } snMspsVlanTunnelProtocolEntry OBJECT-TYPE SYNTAX SnMspsVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. Tunnel Status cannot be set to `tunnel/discard`, if the protocol is enabled on the port.Exception, Igmp and dot1x should be disabled globally for setting the tunnel status to `tunnel/discard`." INDEX { snMspsVlanPort } ::= { snMspsVlanTunnelProtocolTable 1 } SnMspsVlanTunnelProtocolEntry ::= SEQUENCE { snMspsVlanTunnelProtocolDot1x TunnelStatus, snMspsVlanTunnelProtocolLacp TunnelStatus, snMspsVlanTunnelProtocolStp TunnelStatus, snMspsVlanTunnelProtocolGvrp TunnelStatus, snMspsVlanTunnelProtocolGmrp TunnelStatus, snMspsVlanTunnelProtocolIgmp TunnelStatus, snMspsVlanTunnelProtocolMvrp TunnelStatus, snMspsVlanTunnelProtocolMmrp TunnelStatus } snMspsVlanTunnelProtocolDot1x OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 1 } snMspsVlanTunnelProtocolLacp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the LACP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 2 } snMspsVlanTunnelProtocolStp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the STP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 3 } snMspsVlanTunnelProtocolGvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GVRP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 4 } snMspsVlanTunnelProtocolGmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GMRP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 5 } snMspsVlanTunnelProtocolIgmp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the IGMP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 6 } snMspsVlanTunnelProtocolMvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MVRP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 7 } snMspsVlanTunnelProtocolMmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MMRP packets received on this port." ::= { snMspsVlanTunnelProtocolEntry 8 } -- ---------------------------------------------------------------- -- Tunnel protocol statistics table -- ---------------------------------------------------------------- snMspsVlanTunnelProtocolStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a port." ::= { snMspsVlanTunnelObjects 9 } snMspsVlanTunnelProtocolStatsEntry OBJECT-TYPE SYNTAX SnMspsVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port." INDEX { snMspsVlanPort } ::= { snMspsVlanTunnelProtocolStatsTable 1 } SnMspsVlanTunnelProtocolStatsEntry ::= SEQUENCE { snMspsVlanTunnelProtocolDot1xPktsRecvd Counter32, snMspsVlanTunnelProtocolDot1xPktsSent Counter32, snMspsVlanTunnelProtocolLacpPktsRecvd Counter32, snMspsVlanTunnelProtocolLacpPktsSent Counter32, snMspsVlanTunnelProtocolStpPDUsRecvd Counter32, snMspsVlanTunnelProtocolStpPDUsSent Counter32, snMspsVlanTunnelProtocolGvrpPDUsRecvd Counter32, snMspsVlanTunnelProtocolGvrpPDUsSent Counter32, snMspsVlanTunnelProtocolGmrpPktsRecvd Counter32, snMspsVlanTunnelProtocolGmrpPktsSent Counter32, snMspsVlanTunnelProtocolIgmpPktsRecvd Counter32, snMspsVlanTunnelProtocolIgmpPktsSent Counter32, snMspsVlanTunnelProtocolMvrpPktsRecvd Counter32, snMspsVlanTunnelProtocolMvrpPktsSent Counter32, snMspsVlanTunnelProtocolMmrpPktsRecvd Counter32, snMspsVlanTunnelProtocolMmrpPktsSent Counter32 } snMspsVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets received." ::= { snMspsVlanTunnelProtocolStatsEntry 1 } snMspsVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 2 } snMspsVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP Packets received." ::= { snMspsVlanTunnelProtocolStatsEntry 3 } snMspsVlanTunnelProtocolLacpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP packets transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 4 } snMspsVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs received." ::= { snMspsVlanTunnelProtocolStatsEntry 5 } snMspsVlanTunnelProtocolStpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 6 } snMspsVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs received." ::= { snMspsVlanTunnelProtocolStatsEntry 7 } snMspsVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 8 } snMspsVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP PDUs packets received." ::= { snMspsVlanTunnelProtocolStatsEntry 9 } snMspsVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP packets transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 10 } snMspsVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets received." ::= { snMspsVlanTunnelProtocolStatsEntry 11 } snMspsVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets transmitted." ::= { snMspsVlanTunnelProtocolStatsEntry 12 } snMspsVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs received on a port for which the MVRP tunneling status is enabled." ::= { snMspsVlanTunnelProtocolStatsEntry 13 } snMspsVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs transmitted on a port on which the MVRP tunneling status is enabled." ::= { snMspsVlanTunnelProtocolStatsEntry 14 } snMspsVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs received on a port for which the MMRP tunneling status is enabled." ::= { snMspsVlanTunnelProtocolStatsEntry 15 } snMspsVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs transmitted on a port on which the MMRP tunneling status is enabled." ::= { snMspsVlanTunnelProtocolStatsEntry 16 } snMspsVlanDiscardObjects OBJECT IDENTIFIER ::= { snMspsVlan 52 } -- ---------------------------------------------------------------- -- VLAN Discard statistics table -- ---------------------------------------------------------------- snMspsVlanDiscardStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the L2 protocol packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on reception and transmission side due to 'Discard' tunnel protocol status." ::= { snMspsVlanDiscardObjects 1 } snMspsVlanDiscardStatsEntry OBJECT-TYPE SYNTAX SnMspsVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the Discard statistics for L2 protocol packets." INDEX { snMspsVlanPort } ::= { snMspsVlanDiscardStatsTable 1 } SnMspsVlanDiscardStatsEntry ::= SEQUENCE { snMspsVlanDiscardDot1xPktsRx Counter32, snMspsVlanDiscardDot1xPktsTx Counter32, snMspsVlanDiscardLacpPktsRx Counter32, snMspsVlanDiscardLacpPktsTx Counter32, snMspsVlanDiscardStpPDUsRx Counter32, snMspsVlanDiscardStpPDUsTx Counter32, snMspsVlanDiscardGvrpPktsRx Counter32, snMspsVlanDiscardGvrpPktsTx Counter32, snMspsVlanDiscardGmrpPktsRx Counter32, snMspsVlanDiscardGmrpPktsTx Counter32, snMspsVlanDiscardIgmpPktsRx Counter32, snMspsVlanDiscardIgmpPktsTx Counter32, snMspsVlanDiscardMvrpPktsRx Counter32, snMspsVlanDiscardMvrpPktsTx Counter32, snMspsVlanDiscardMmrpPktsRx Counter32, snMspsVlanDiscardMmrpPktsTx Counter32 } snMspsVlanDiscardDot1xPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 1 } snMspsVlanDiscardDot1xPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 2 } snMspsVlanDiscardLacpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 3 } snMspsVlanDiscardLacpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 4 } snMspsVlanDiscardStpPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 5 } snMspsVlanDiscardStpPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 6 } snMspsVlanDiscardGvrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 7 } snMspsVlanDiscardGvrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 8 } snMspsVlanDiscardGmrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 9 } snMspsVlanDiscardGmrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 10 } snMspsVlanDiscardIgmpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 11 } snMspsVlanDiscardIgmpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 12 } snMspsVlanDiscardMvrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRP packets discarded on the reception side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 13 } snMspsVlanDiscardMvrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 14 } snMspsVlanDiscardMmrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRP packets discarded on the receiption side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 15 } snMspsVlanDiscardMmrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRP packets discarded on the transmission side due to Discard option." ::= { snMspsVlanDiscardStatsEntry 16 } -- snMspsVlan 54-55 reserved snMspsVlanBridgeMode OBJECT-TYPE SYNTAX INTEGER { customerBridge (1), providerBridge (2), providerEdgeBridge (3), providerCoreBridge (4), providerBackoneICompBridge (5), providerBackoneBCompBridge (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the Bridge mode of the switch. Setting this to 'customerBridge' means that the switch will operate as a 802.1Q VLAN Bridge. Setting this to 'providerBridge' means that the Bridge will operate as a normal Q-in-Q Bridge. Setting this to 'providerCoreBridge' means that the switch will operate as a 802.1ad compliant provider bridge with only S-VLAN component. Setting this to 'providerEdgeBridge' means that the switch will operate as a 802.1ad provider edge bridge with S-VLAN component and atleast one C-VLAN component. Setting this to 'providerBackoneICompBridge' means that the switch will operate as a 802.1ah provider backone bridge as an I component. Setting this to 'providerBackoneBCompBridge' means that the switch will operate as a 802.1ah provider backone bridge as a B component. For changing the bridge mode, GARP and STP modules should be shutdown." ::= { snMspsVlan 56 } -- ---------------------------------------------------------------------------- -- Vlan Subnet Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanPortSubnetMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanPortSubnetMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Subnet based VLAN classification - The source IP-subnet address in the incoming packets is used to classify VLAN membership. Subnet based VLAN is applied only on IP/ARP packets. This table contains information on Subnet-VlanId address mapping. In case of BCM, the snMspsDot1qVlanPort index should always be 0 since BCM supports Subnet based VLAN globally (not on per port)" ::= { snMspsVlan 57 } snMspsDot1qVlanPortSubnetMapEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanPortSubnetMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry that contains Vlan-Subnet address mapping." INDEX { snMspsDot1qVlanPort, snMspsDot1qVlanPortSubnetMapAddr} ::= { snMspsDot1qVlanPortSubnetMapTable 1 } SnMspsDot1qVlanPortSubnetMapEntry ::= SEQUENCE { snMspsDot1qVlanPortSubnetMapAddr IpAddress, snMspsDot1qVlanPortSubnetMapVid VlanId, snMspsDot1qVlanPortSubnetMapARPOption INTEGER, snMspsDot1qVlanPortSubnetMapRowStatus RowStatus, snMspsDot1qVlanPortSubnetMapSubnetMask IpAddress } snMspsDot1qVlanPortSubnetMapAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source IP-Subnet address for which the Vlan mapping is present in the entry." ::= { snMspsDot1qVlanPortSubnetMapEntry 1 } snMspsDot1qVlanPortSubnetMapVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Vlan to which the Source IP-Subnet address of this entry is mapped to." ::= { snMspsDot1qVlanPortSubnetMapEntry 2 } snMspsDot1qVlanPortSubnetMapARPOption OBJECT-TYPE SYNTAX INTEGER { allow(1), suppress(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable option for discarding/allowing ARP Untagged frames on the vlan. The value allow (1) indicates that ARP frames with source IP-subnet address matching the snMspsDot1qVlanPortSubnetMapEntry will be classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry. The value suppress (2) indicates that ARP frames with source IP-Subnet address matching the snMspsDot1qVlanPortSubnetMapEntry will not be classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry. The VLAN classification will be based on next subsequent classification mechanism." DEFVAL { allow } ::= { snMspsDot1qVlanPortSubnetMapEntry 3 } snMspsDot1qVlanPortSubnetMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of the entry." ::= { snMspsDot1qVlanPortSubnetMapEntry 4 } snMspsDot1qVlanPortSubnetMapSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Source IP-Subnet Mask for which the Vlan mapping is present in the entry." ::= { snMspsDot1qVlanPortSubnetMapEntry 5 } -- ---------------------------------------------------------------------------- -- END OF Vlan Subnet Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanSubnetBasedOnAllPorts OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable the subnet based VLAN Classification on all ports of snMspsDot1qVlanPortSubnetBasedClassification. On setting this object to enable/disable status, Subnet based VLAN classification will be enabled/disabled on all the ports." ::= { snMspsVlan 58 } -- ---------------------------------------------------------------------------- -- Vlan Ipv6 Prefix Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanPortIpv6PrefixMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1qVlanPortIpv6PrefixMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ipv6 prefix based VLAN classification - The source Ipv6-prefix address in the incoming packets is used to classify VLAN membership. prefix based VLAN is applied only on Ipv6 packets. This table contains information on Prefix-VlanId address mapping." ::= { snMspsVlan 59 } snMspsDot1qVlanPortIpv6PrefixMapEntry OBJECT-TYPE SYNTAX SnMspsDot1qVlanPortIpv6PrefixMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry that contains Vlan-Ipv6 prefix address mapping." INDEX { snMspsDot1qVlanPort, snMspsDot1qVlanPortIpv6PrefixMapAddr} ::= { snMspsDot1qVlanPortIpv6PrefixMapTable 1 } SnMspsDot1qVlanPortIpv6PrefixMapEntry ::= SEQUENCE { snMspsDot1qVlanPortIpv6PrefixMapAddr OCTET STRING, snMspsDot1qVlanPortIpv6PrefixMapAddrLength Integer32, snMspsDot1qVlanPortIpv6PrefixMapVid VlanId, snMspsDot1qVlanPortIpv6PrefixMapRowStatus RowStatus } snMspsDot1qVlanPortIpv6PrefixMapAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source Ipv6-prefix address for which the Vlan mapping is present in the entry." ::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 1 } snMspsDot1qVlanPortIpv6PrefixMapAddrLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The Source Ipv6-prefix length for which the Vlan mapping is present in the entry." ::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 2 } snMspsDot1qVlanPortIpv6PrefixMapVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Vlan to which the Source Ipv6-prefix address of this entry is mapped to." ::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 3 } snMspsDot1qVlanPortIpv6PrefixMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of the entry." ::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 4 } -- ---------------------------------------------------------------------------- -- END OF Vlan Ipv6 Prefix Map Table -- ---------------------------------------------------------------------------- snMspsDot1qVlanAltMgmtAccessVlanList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Vlan's in which the Mgmt Ip address can be accessed. By default the access is not allowed to reside in any vlan. This entry will only be applicable if there is no L3 Vlan associated with L2 Vlan." ::= { snMspsVlan 65 } -- Textual Conventions PriorityCodePoint ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify the priority code point selection row" SYNTAX INTEGER { codePoint8p0d(1), codePoint7p1d(2), codePoint6p2d(3), codePoint5p3d(4) } --MIB objects for configuring the IEEE802.1ad Provider Bridging snMspsDot1adProviderBridge OBJECT IDENTIFIER ::= { snMspsDot1ad 1 } --Proprietary MIB implementation for the Provider Bridging functionality snMspsDot1adPbSystem OBJECT IDENTIFIER ::= { snMspsDot1ad 2 } snMspsDot1adPbConfig OBJECT IDENTIFIER ::= { snMspsDot1ad 3 } -- ------------------------------------------------------------- -- The 802.1ad Provider Bridge Port Configuration Table -- ------------------------------------------------------------- snMspsDot1adPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing provider bridge port related configurations. All the values for the objects in this table will take effect only when the Bridge Mode is set as ProviderCoreBridge or ProviderEdgeBridge." ::= { snMspsDot1adProviderBridge 1 } snMspsDot1adPortEntry OBJECT-TYPE SYNTAX SnMspsDot1adPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling per port configurations for the externally accessible ports of Provider Bridges." INDEX { snMspsDot1adPortNum } ::= { snMspsDot1adPortTable 1 } SnMspsDot1adPortEntry ::= SEQUENCE { snMspsDot1adPortNum Integer32, snMspsDot1adPortPcpSelectionRow PriorityCodePoint, snMspsDot1adPortUseDei TruthValue, snMspsDot1adPortReqDropEncoding TruthValue } snMspsDot1adPortNum OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { snMspsDot1adPortEntry 1 } snMspsDot1adPortPcpSelectionRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS read-write STATUS current DESCRIPTION "The row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the row configured as per this mib object for this port. This can be set for all bride port types." DEFVAL { 1 } ::= { snMspsDot1adPortEntry 2 } snMspsDot1adPortUseDei OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether drop_eligible parameter in the PCP can be used for encoding and decoding. If this object is set to True for the port, then drop_eligible parameter will be encoded in the DEI of transmitted frames.If the DEI is set in the S-tag or the PCP decoding table indicates that drop_eligible True, then drop_eligible will become true for the received frames. If this object is set to False, the DEI will be transmitted as zero and ignored on receipt. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { snMspsDot1adPortEntry 3 } snMspsDot1adPortReqDropEncoding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to True and if the bridge port can not encode particular priorities with drop_eligible, then frames queued with those priorites and drop_eligible true can be discarded and not transmitted. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { snMspsDot1adPortEntry 4 } -- ---------------------------------------------------------------- -- VID Translation Table -- This is the VID translation table (Ref. IEEE802.1ad/D6 - Section -- (12.13.2.1) -- ---------------------------------------------------------------- snMspsDot1adVidTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adVidTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This VID Translation table provides a bidirectional mapping between a Local S-VID and a relay S-VID. This table is applicable only for the externally accessible network ports (ie) Customer Network Port / Provider Network Port / Proprietary Customer Network Port." ::= { snMspsDot1adProviderBridge 2 } snMspsDot1adVidTranslationEntry OBJECT-TYPE SYNTAX SnMspsDot1adVidTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains the information of translating a Local Service Vlan in the packet to the Relay Service VLAN. This entry shall only be applicable at Network ports." INDEX { snMspsDot1adPortNum, snMspsDot1adVidTranslationLocalVid } ::= { snMspsDot1adVidTranslationTable 1 } SnMspsDot1adVidTranslationEntry ::= SEQUENCE { snMspsDot1adVidTranslationLocalVid VlanId, snMspsDot1adVidTranslationRelayVid VlanId, snMspsDot1adVidTranslationRowStatus RowStatus } snMspsDot1adVidTranslationLocalVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION " A Service VLAN Identifier used in the S-Tag of frames transmitted and received through this customer Network Port / Provider Network Port / Proprietary Customer Network Port." ::= { snMspsDot1adVidTranslationEntry 1 } snMspsDot1adVidTranslationRelayVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION " This Service VLAN identifier used by the filtering and forwarding processes of the S-VLAN component in the provider bridge. This Vlan is identified for a given port (CNP/ Prop CNP/ PNP) and the specified Local S-VLAN present in the frame" ::= { snMspsDot1adVidTranslationEntry 2 } snMspsDot1adVidTranslationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'. The Entry in this table is used only when the translation status for a Port (CNP/ PropCNP/PNP) is enabled and the Row status is SET 'active'." ::= { snMspsDot1adVidTranslationEntry 3 } -- ------------------------------------------------------------- -- This table is the C-VID Registration table (Ref. Section -- 12.13.3.1 IEEE802.1ad/D6) -- ------------------------------------------------------------- snMspsDot1adCVidRegistrationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adCVidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table provides a mapping between a customer VLAN Identifier (C-VID) and service instance represented by Service VLAN identifier(S-VID) for a customer edge port. An Entry in this table result in 'cvlan' type of SVLAN classification for CEP Ports. This can be configured only on Customer Edge Port." ::= { snMspsDot1adProviderBridge 3 } snMspsDot1adCVidRegistrationEntry OBJECT-TYPE SYNTAX SnMspsDot1adCVidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An Entry in this table provides functionality of a) Configuring PVID of the internal Customer Network Port of SVLAN component. b) Adding PEP on the C-VLAN component to member set of C-VLAN c) Adding PEP and/or CEP to the untagged set of C-VLAN, if it is desired." INDEX { snMspsDot1adPortNum, snMspsDot1adCVidRegistrationCVid } ::= { snMspsDot1adCVidRegistrationTable 1 } SnMspsDot1adCVidRegistrationEntry ::= SEQUENCE { snMspsDot1adCVidRegistrationCVid VlanId, snMspsDot1adCVidRegistrationSVid VlanId, snMspsDot1adCVidRegistrationUntaggedPep TruthValue, snMspsDot1adCVidRegistrationUntaggedCep TruthValue, snMspsDot1adCVidRegistrationRowStatus RowStatus } snMspsDot1adCVidRegistrationCVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The customer VLAN ID in the customer VLAN tag of an ingress frame at this specified port or the customer VLAN ID to which the ingress frame is classified to, at this specified port." ::= { snMspsDot1adCVidRegistrationEntry 1 } snMspsDot1adCVidRegistrationSVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "S-VLAN Id for the service instance to which this port and this C-VLAN are mapped to. ie) CEP,C-VID ===> S-VID." ::= { snMspsDot1adCVidRegistrationEntry 2 } snMspsDot1adCVidRegistrationUntaggedPep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Provider Edge Port (PEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the packet will be sent out with a C-tag and with valid C-VID." DEFVAL { false } ::= { snMspsDot1adCVidRegistrationEntry 3 } snMspsDot1adCVidRegistrationUntaggedCep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Customer Edge Port (CEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the tag will be added if the packet is C-VLAN untagged." DEFVAL { false } ::= { snMspsDot1adCVidRegistrationEntry 4 } snMspsDot1adCVidRegistrationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adCVidRegistrationEntry 5 } -- ---------------------------------------------------------------- -- Provider Edge Port configuration table (Ref. IEEE802.1ad/D6 - Section -- 12.13.3.3 and 12.13.3.4) -- ---------------------------------------------------------------- snMspsDot1adPepTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table provides configuration options (PVID,Acceptable frame type, default user priority and ingress filtering) for the internal PEP interfaces created when an entry is created in C-VID registration table." ::= { snMspsDot1adProviderBridge 4 } snMspsDot1adPepEntry OBJECT-TYPE SYNTAX SnMspsDot1adPepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains information (PVID, Acceptable frame type, default user priority and ingress filtering) for the packets received over internal PEPs. Creation of an entry in this table is not allowed and only modification is allowed." INDEX {snMspsDot1adPortNum, snMspsDot1adCVidRegistrationSVid } ::= { snMspsDot1adPepTable 1 } SnMspsDot1adPepEntry ::= SEQUENCE { snMspsDot1adPepPvid VlanId, snMspsDot1adPepDefaultUserPriority INTEGER, snMspsDot1adPepAccptableFrameTypes INTEGER, snMspsDot1adPepIngressFiltering TruthValue } snMspsDot1adPepPvid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID to be used for the untagged packets received over this PEP. This refers to the customer VLAN ID to which the untagged packets received over this PEP will be classified. And this is the VLAN ID put in the C-VLAN tag when the outgoing CEP is tagged i.e untagged CEP is set to False for this port in the C-VID registration table entry." ::= { snMspsDot1adPepEntry 1 } snMspsDot1adPepDefaultUserPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The default ingress user priority to be used for the untagged packets received over provider edge ports.This will be used for the PCP encoding of C-VLAN tag for the outgoing packets when the outgoing CEP is tagged i.e untagged CEP is set to False in the C-VID registration table entry for this port." DEFVAL { 0 } ::= { snMspsDot1adPepEntry 2 } snMspsDot1adPepAccptableFrameTypes OBJECT-TYPE SYNTAX INTEGER { admitAll(1), admitOnlyVlanTagged(2), admitOnlyUntaggedAndPriorityTagged (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1) is set, all frames tagged/untagged/priority tagged frames received on this port will be accepted. When admitOnlyUntaggedAndPriorityTagged(3) is set, untagged and priority tagged frames alone will be accepted and tagged frames received over this PEP will be discarded." DEFVAL { admitAll } ::= { snMspsDot1adPepEntry 3 } snMspsDot1adPepIngressFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this is true(1), if this port is not in the member set of a C-VLAN, then frames received on this port classified to that C-VLAN will be discarded. When false(2), the port will accept all incoming frames received over this PEP" DEFVAL { false } ::= { snMspsDot1adPepEntry 4 } -- ---------------------------------------------------------------- -- Service Priority regeneration configuration table (Ref. -- IEEE802.1ad/D6 - Section 12.13.3.5 and 12.13.3.6) -- ---------------------------------------------------------------- snMspsDot1adServicePriorityRegenerationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adServicePriorityRegenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps each receive priority to a regenerated priority on this internal customer network port. Creation of an entry in this table is not allowed and only modification is allowed. An entry will be created in this table with default values for the CEP and S-VLAN pair,when the corresponding entry is created in C-VID registration table." ::= { snMspsDot1adProviderBridge 5 } snMspsDot1adServicePriorityRegenerationEntry OBJECT-TYPE SYNTAX SnMspsDot1adServicePriorityRegenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of incoming priority and regenerated priority for internal customer network ports." INDEX { snMspsDot1adPortNum, snMspsDot1adCVidRegistrationSVid, snMspsDot1adServicePriorityRegenReceivedPriority } ::= { snMspsDot1adServicePriorityRegenerationTable 1 } SnMspsDot1adServicePriorityRegenerationEntry ::= SEQUENCE { snMspsDot1adServicePriorityRegenReceivedPriority INTEGER, snMspsDot1adServicePriorityRegenRegeneratedPriority INTEGER } snMspsDot1adServicePriorityRegenReceivedPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The received priority value for a frame over the internal customer network port. For tagged packets, this refers to the priority of C-tag received over the CEPs. For untagged packets, the default user priority of CEP will be used as the receive priority." ::= { snMspsDot1adServicePriorityRegenerationEntry 1 } snMspsDot1adServicePriorityRegenRegeneratedPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The regenerated priority value for the received priority for a frame received over the internal customer network port. The PCP encoding for the frames that are to be sent out will be based on the regenerated priority value got from this object." ::= { snMspsDot1adServicePriorityRegenerationEntry 2 } -- ---------------------------------------------------------------- -- PCP decoding table (Priority Code Point decoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.8 and 12.6.2.9) -- ---------------------------------------------------------------- snMspsDot1adPcpDecodingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters of the received frames are decoded from the PCP using Priority Code Point decoding table. For each port, the PCP decoding table has eight entries corresponding to each of the possible PCP values." ::= { snMspsDot1adProviderBridge 6 } snMspsDot1adPcpDecodingEntry OBJECT-TYPE SYNTAX SnMspsDot1adPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the priority and drop_eligible information for a particular port, PCP selection row and PCP value. Creation of an entry in this table is not allowed and only modification is permitted" INDEX { snMspsDot1adPortNum, snMspsDot1adPcpDecodingPcpSelRow, snMspsDot1adPcpDecodingPcpValue } ::= { snMspsDot1adPcpDecodingTable 1 } SnMspsDot1adPcpDecodingEntry ::= SEQUENCE { snMspsDot1adPcpDecodingPcpSelRow PriorityCodePoint, snMspsDot1adPcpDecodingPcpValue INTEGER, snMspsDot1adPcpDecodingPriority INTEGER, snMspsDot1adPcpDecodingDropEligible TruthValue } snMspsDot1adPcpDecodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP selection row in the decoding table for which the priority and drop eligible parameters are to be mapped for a given PCP value." ::= { snMspsDot1adPcpDecodingEntry 1 } snMspsDot1adPcpDecodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP value in the decoding table for which the priority and drop eligible parameters are to be derived." ::= { snMspsDot1adPcpDecodingEntry 2 } snMspsDot1adPcpDecodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority associated with the particular PCP and PCP selection row in the PCP decoding table.This is the priority decoded for the PCP associated with the received frame. The frame will further be processed with this priority value." ::= { snMspsDot1adPcpDecodingEntry 3 } snMspsDot1adPcpDecodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The drop_eligible value associated with the particular PCP and PCP selection row in the PCP decoding table. When this is set to True, frames should be discarded in preference to other frames with drop_eligible False." ::= { snMspsDot1adPcpDecodingEntry 4 } -- ---------------------------------------------------------------- -- PCP encoding table (Priority Code Point encoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.10 and 12.6.2.11) -- ---------------------------------------------------------------- snMspsDot1adPcpEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters are encoded in the Priority Code Point field of the VLAN tag using the Priority Code Point encoding table for the port. For each port, PCP encoding table has 16 entries, corresponding to each of the possible combinations of the eight possible values of priority and two possible values of drop_eligible." ::= { snMspsDot1adProviderBridge 7 } snMspsDot1adPcpEncodingEntry OBJECT-TYPE SYNTAX SnMspsDot1adPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the PCP value for a particular port,PCP selection row, priority and drop_eligible value. Creation of an entry in this table is not allowed and only modification is permitted." INDEX {snMspsDot1adPortNum, snMspsDot1adPcpEncodingPcpSelRow, snMspsDot1adPcpEncodingPriority, snMspsDot1adPcpEncodingDropEligible } ::= { snMspsDot1adPcpEncodingTable 1 } SnMspsDot1adPcpEncodingEntry ::= SEQUENCE { snMspsDot1adPcpEncodingPcpSelRow PriorityCodePoint, snMspsDot1adPcpEncodingPriority INTEGER, snMspsDot1adPcpEncodingDropEligible TruthValue, snMspsDot1adPcpEncodingPcpValue INTEGER } snMspsDot1adPcpEncodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP selection row in the encoding table for which the the PCP value to be mapped for a particular priority and drop_eligible combination." ::= { snMspsDot1adPcpEncodingEntry 1 } snMspsDot1adPcpEncodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority associated with a particular PCP selection row. Priority and drop_eligible combination for a particular port will be mapped to a PCP valule." ::= { snMspsDot1adPcpEncodingEntry 2 } snMspsDot1adPcpEncodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The drop_eligible parameter associated with a particular priority and PCP selection row in the PCP encoding table." ::= { snMspsDot1adPcpEncodingEntry 3 } snMspsDot1adPcpEncodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The PCP value associated with the particular priority and drop_eligible combination of the PCP selection row in PCP encoding table. This will be encoded in the transmitted frames." ::= { snMspsDot1adPcpEncodingEntry 4 } --Proprietary MIB implementation for the Provider Bridging functionality snMspsDot1adPbContextInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Provider Bridge related objects that can be configured per Virtual Context in the system." ::= { snMspsDot1adPbSystem 1 } snMspsDot1adPbContextInfoEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Context based Provider Bridge objects." INDEX { snMspsDot1adPbContextId } ::= { snMspsDot1adPbContextInfoTable 1 } SnMspsDot1adPbContextInfoEntry ::= SEQUENCE { snMspsDot1adPbContextId Integer32, snMspsDot1adPbMulticastMacLimit Unsigned32, snMspsDot1adPbTunnelStpAddress MacAddress, snMspsDot1adPbTunnelLacpAddress MacAddress, snMspsDot1adPbTunnelDot1xAddress MacAddress, snMspsDot1adPbTunnelGvrpAddress MacAddress, snMspsDot1adPbTunnelGmrpAddress MacAddress } snMspsDot1adPbContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies a Virtual Context." ::= { snMspsDot1adPbContextInfoEntry 1 } snMspsDot1adPbMulticastMacLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The Multicast MAC table size of the device. The size SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry.The upper limit value that can be SET for this object is limited by the underlying hardware. While on initialisation this object hold the maximum size of the Multicast MAC table of the device." ::= { snMspsDot1adPbContextInfoEntry 2 } snMspsDot1adPbTunnelStpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for Customer STP BPDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer BPDUs received on a port where STP tunneling is enabled and the outgoing port is a proprietary PNP. Inside Provider Network, the BPDUs received with this MAC address will be treated as data packets and not processed. When the BPDU is sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for Customer STP BPDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { snMspsDot1adPbContextInfoEntry 3 } snMspsDot1adPbTunnelLacpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for LACP packets tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer LACP packets received over this port. Inside Provider Network, LACP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LACP packets are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for LACP packets. This configuration is allowed only for Provider Core or Edge Bridges." ::= { snMspsDot1adPbContextInfoEntry 4 } snMspsDot1adPbTunnelDot1xAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for Dot1x packets tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer Dot1x packets received over this port. Inside Provider Network, Dot1x packets received with this MAC address will be treated as data packets and not processed. When the tunneled Dot1x packets are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for Dot1x packets. This configuration is allowed only for Provider Core or Edge Bridges." ::= { snMspsDot1adPbContextInfoEntry 5 } snMspsDot1adPbTunnelGvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for GVRP PDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GVRP PDUs received on a port where GVRP tunneling is enable and the outgoing port is a proprietary PNP. Inside Provider Network, GVRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GVRP PDUs are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for GVRP PDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { snMspsDot1adPbContextInfoEntry 6 } snMspsDot1adPbTunnelGmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for GMRP PDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GMRP PDUs received over this port. Inside Provider Network, GMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GMRP PDUs are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for GMRP PDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { snMspsDot1adPbContextInfoEntry 7 } -- ------------------------------------------------------------- -- The Provider Bridge Port Type Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing provider bridge releated configurations for the externally accessible ports. All the objects in this table are applicable only when the Bridge Mode is set as ProviderBridge or ProviderCoreBridge or ProviderEdgeBridge." ::= { snMspsDot1adPbConfig 1 } snMspsDot1adPbPortInfoEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table specifies the Provider Bridge related port configurations. This table is indexed by ifIndex. " INDEX { snMspsDot1adPbPort } ::= { snMspsDot1adPbPortInfoTable 1 } SnMspsDot1adPbPortInfoEntry ::= SEQUENCE { snMspsDot1adPbPort Integer32, snMspsDot1adPbPortSVlanClassificationMethod INTEGER, snMspsDot1adPbPortSVlanIngressEtherType Integer32, snMspsDot1adPbPortSVlanEgressEtherType Integer32, snMspsDot1adPbPortSVlanEtherTypeSwapStatus EnabledStatus, snMspsDot1adPbPortSVlanTranslationStatus EnabledStatus, snMspsDot1adPbPortUnicastMacLearning EnabledStatus, snMspsDot1adPbPortUnicastMacLimit Unsigned32 } snMspsDot1adPbPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { snMspsDot1adPbPortInfoEntry 1 } snMspsDot1adPbPortSVlanClassificationMethod OBJECT-TYPE SYNTAX INTEGER { sourceMac (1), destinationMac (2), cvlanSrcMac (3), cvlanDstMac (4), dscp (5), cvlanDscp (6), sourceIp (7), destinationIp (8), srcIpDstIp (9), cvlanDstIp (10), cvlan (11), pvid (12) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of SVLAN classification that has to be used for a given type of port. providerNetworkPort / customerNetworkPort - Port's 'pvid' will be the SVLAN classification for the untagged packets received over this interface. customerEdgePort - The SVLAN classification mechanism is always based on 'cvlan' (i.e CVidRegistrationTable ).No other SVLAN classification mechanism is allowed for this port type. propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be default SVLAN classification mechanism for this port. But the user is free to configure any other SVLAN classification mechanism except the CVidRegistrationTable (ie cvlan mechanism) For proprietary CEP and proprietary CNP ports,the SVLAN classification is based on one of the configured SVLAN classification methods mentioned here. If it is not configured, by default the port's 'PVID' is considered as the SVLAN for untagged packets." ::= { snMspsDot1adPbPortInfoEntry 2 } snMspsDot1adPbPortSVlanIngressEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates the S-VLAN tag ether type used for the packets received on this port.Packets received on a port are considered tagged, when the packet ethertype matches with the port ether type configured. Otherwise, they will be considered untagged. By default, on all the ports, 0x88a8 will be configured as the ether type. On Proprietary Provider Network Ports 0x8100 will be configured as the ingress ethertype." DEFVAL { 34984 } ::= { snMspsDot1adPbPortInfoEntry 3 } snMspsDot1adPbPortSVlanEgressEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates the ether type of the S-VLAN tag that has to be applied for all the outgoing packets on this port. If a valid value is in this object, all the packets which are outgoing on this port will contain the ether type as configured in this object. By Default 0x88a8 will be used for packets transmitted with S-VLAN on the ports. On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100 will be used as the ether type for the outgoing packets." DEFVAL { 34984 } ::= { snMspsDot1adPbPortInfoEntry 4} snMspsDot1adPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates whether the Ether Type Swapping can be applied on the S-VLAN tagged packets over this port. The Ether type swapping will only be applied on S-VLAN tag of a packet. This configuration is applicable for all values of Port Type other than customer edge ports." DEFVAL { disabled } ::= { snMspsDot1adPbPortInfoEntry 5 } snMspsDot1adPbPortSVlanTranslationStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates whether the VID Translation table can be enabled on the incoming/outgoing packets on a particular port. The Service Vlan swapping is applicable only for the externally accesible network ports (ie) Provider Network Port ,Customer Network port and proprietary Customer Network Port. The Service Vlan Translation status can be enabled or disabled on per port basis. By default, it is enabled on Provider Network Port and Customer Network Port(S-Tagged) and disabled on the other applicable port-types." ::= { snMspsDot1adPbPortInfoEntry 6 } snMspsDot1adPbPortUnicastMacLearning OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "A Truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, No Entry will be learned from the point of configuration on this port. When Mac Learning is enabled, Entries will be learned on this port." DEFVAL { enabled } ::= { snMspsDot1adPbPortInfoEntry 7 } snMspsDot1adPbPortUnicastMacLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The Limiting value on the number of distinct unicast destination MAC addresses that can be dynamically learnt over this interface. The lower limit and upper limit value that can be SET for this object is determined by the underlying hardware. This Limit is applicable for only dynamically learned entries and NOT for static unicast entries" ::= { snMspsDot1adPbPortInfoEntry 8 } -- ------------------------------------------------------------- -- The S-VLAN Port , SourceMAC based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbSrcMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per SourceMAC based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the Port Type for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbConfig 2 } snMspsDot1adPbSrcMacSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Source MAC address in the ethernet header of the frame." INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcMacAddress } ::= { snMspsDot1adPbSrcMacSVlanTable 1 } SnMspsDot1adPbSrcMacSVlanEntry ::= SEQUENCE { snMspsDot1adPbSrcMacAddress MacAddress, snMspsDot1adPbSrcMacSVlan VlanId, snMspsDot1adPbSrcMacRowStatus RowStatus } snMspsDot1adPbSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { snMspsDot1adPbSrcMacSVlanEntry 1 } snMspsDot1adPbSrcMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames received on this port when the Source MAC address in the ethernet header of the frame is same as specified in this entry." ::= { snMspsDot1adPbSrcMacSVlanEntry 2 } snMspsDot1adPbSrcMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbSrcMacSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port , DestinationMAC based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbDstMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Destination MAC based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'Port Type' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { snMspsDot1adPbConfig 3 } snMspsDot1adPbDstMacSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Destination MAC address in the ethernet header of the frame." INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstMacAddress } ::= { snMspsDot1adPbDstMacSVlanTable 1 } SnMspsDot1adPbDstMacSVlanEntry ::= SEQUENCE { snMspsDot1adPbDstMacAddress MacAddress, snMspsDot1adPbDstMacSVlan VlanId, snMspsDot1adPbDstMacRowStatus RowStatus } snMspsDot1adPbDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { snMspsDot1adPbDstMacSVlanEntry 1 } snMspsDot1adPbDstMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames received on this port when the Destination MAC address in the ethernet header of the frame is same as specified in this entry." ::= { snMspsDot1adPbDstMacSVlanEntry 2 } snMspsDot1adPbDstMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbDstMacSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbCVlanSrcMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per Port, per Customer VLAN ID, per Source MAC based S-VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'PortType' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbConfig 4 } snMspsDot1adPbCVlanSrcMacSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbCVlanSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Source MAC address in the ethernet header of the frame. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanSrcMacCVlan, snMspsDot1adPbCVlanSrcMacAddr } ::= { snMspsDot1adPbCVlanSrcMacSVlanTable 1 } SnMspsDot1adPbCVlanSrcMacSVlanEntry ::= SEQUENCE { snMspsDot1adPbCVlanSrcMacCVlan VlanId, snMspsDot1adPbCVlanSrcMacAddr MacAddress, snMspsDot1adPbCVlanSrcMacSVlan VlanId, snMspsDot1adPbCVlanSrcMacRowStatus RowStatus } snMspsDot1adPbCVlanSrcMacCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port OR the Customer VLAN ID for which the ingress frame is classified to this specified port." ::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 1 } snMspsDot1adPbCVlanSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source MAC address in the ethernet header of the frame received on this port." ::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 2 } snMspsDot1adPbCVlanSrcMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN assigned to frames received on this port, When the Classified Customer VLAN ID is same as specified in this entry and When the Source MAC address in the ethernet header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 3 } snMspsDot1adPbCVlanSrcMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbCVlanDstMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per Port, per Customer VLAN ID, per Destination MAC based S-VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'Port Type' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbConfig 5 } snMspsDot1adPbCVlanDstMacSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbCVlanDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Destination MAC address in the ethernet header of the frame. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstMacCVlan, snMspsDot1adPbCVlanDstMacAddr } ::= { snMspsDot1adPbCVlanDstMacSVlanTable 1 } SnMspsDot1adPbCVlanDstMacSVlanEntry ::= SEQUENCE { snMspsDot1adPbCVlanDstMacCVlan VlanId, snMspsDot1adPbCVlanDstMacAddr MacAddress, snMspsDot1adPbCVlanDstMacSVlan VlanId, snMspsDot1adPbCVlanDstMacRowStatus RowStatus } snMspsDot1adPbCVlanDstMacCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { snMspsDot1adPbCVlanDstMacSVlanEntry 1 } snMspsDot1adPbCVlanDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination MAC address in the ethernet header of the frame received on this port." ::= { snMspsDot1adPbCVlanDstMacSVlanEntry 2 } snMspsDot1adPbCVlanDstMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN assigned to frames received on this port when the Classified Customer VLAN ID and when the Destination MAC address in the ethernet header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { snMspsDot1adPbCVlanDstMacSVlanEntry 3 } snMspsDot1adPbCVlanDstMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbCVlanDstMacSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port , DSCP based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbDscpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { snMspsDot1adPbConfig 6 } snMspsDot1adPbDscpSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the DSCP value as specified in this entry." INDEX { snMspsDot1adPbPort, snMspsDot1adPbDscp } ::= { snMspsDot1adPbDscpSVlanTable 1 } SnMspsDot1adPbDscpSVlanEntry ::= SEQUENCE { snMspsDot1adPbDscp Integer32, snMspsDot1adPbDscpSVlan VlanId, snMspsDot1adPbDscpRowStatus RowStatus } snMspsDot1adPbDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DSCP value in the IP header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { snMspsDot1adPbDscpSVlanEntry 1 } snMspsDot1adPbDscpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to IP frames received on this port when the DSCP value in the IP header of the frame is same as specified in this entry." ::= { snMspsDot1adPbDscpSVlanEntry 2 } snMspsDot1adPbDscpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbDscpSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbCVlanDscpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Customer VLAN ID, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbConfig 7 } snMspsDot1adPbCVlanDscpSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbCVlanDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this entry and the DSCP value in the frame as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDscpCVlan, snMspsDot1adPbCVlanDscp } ::= { snMspsDot1adPbCVlanDscpSVlanTable 1 } SnMspsDot1adPbCVlanDscpSVlanEntry ::= SEQUENCE { snMspsDot1adPbCVlanDscpCVlan VlanId, snMspsDot1adPbCVlanDscp Integer32, snMspsDot1adPbCVlanDscpSVlan VlanId, snMspsDot1adPbCVlanDscpRowStatus RowStatus } snMspsDot1adPbCVlanDscpCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { snMspsDot1adPbCVlanDscpSVlanEntry 1 } snMspsDot1adPbCVlanDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DSCP value in the IP header of the frame received on this port." ::= { snMspsDot1adPbCVlanDscpSVlanEntry 2 } snMspsDot1adPbCVlanDscpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames received on this port, when the classified Customer VLAN ID is the same as specified in this entry and when the DSCP value in the IP header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { snMspsDot1adPbCVlanDscpSVlanEntry 3 } snMspsDot1adPbCVlanDscpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbCVlanDscpSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Source IP Address based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbSrcIpAddrSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbSrcIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Source IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { snMspsDot1adPbConfig 8 } snMspsDot1adPbSrcIpAddrSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbSrcIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source IP Address in the IP header of the frame as specified in this entry." INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcIpAddr } ::= { snMspsDot1adPbSrcIpAddrSVlanTable 1 } SnMspsDot1adPbSrcIpAddrSVlanEntry ::= SEQUENCE { snMspsDot1adPbSrcIpAddr IpAddress, snMspsDot1adPbSrcIpSVlan VlanId, snMspsDot1adPbSrcIpRowStatus RowStatus } snMspsDot1adPbSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source IP Address in the IP header of an ingress IP frame at this specified port." ::= { snMspsDot1adPbSrcIpAddrSVlanEntry 1 } snMspsDot1adPbSrcIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames ingress at this port when the Source IP address in the IP header of the frame is same as specified in this entry." ::= { snMspsDot1adPbSrcIpAddrSVlanEntry 2 } snMspsDot1adPbSrcIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbSrcIpAddrSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Destination IP Address based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbDstIpAddrSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbDstIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Destination IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { snMspsDot1adPbConfig 9 } snMspsDot1adPbDstIpAddrSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbDstIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Destination IP Address in the IP header of the frame as specified in this entry." INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstIpAddr } ::= { snMspsDot1adPbDstIpAddrSVlanTable 1 } SnMspsDot1adPbDstIpAddrSVlanEntry ::= SEQUENCE { snMspsDot1adPbDstIpAddr IpAddress, snMspsDot1adPbDstIpSVlan VlanId, snMspsDot1adPbDstIpRowStatus RowStatus } snMspsDot1adPbDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { snMspsDot1adPbDstIpAddrSVlanEntry 1 } snMspsDot1adPbDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames ingress at this port when the Destination IP address in the IP header of the frame is same as specified in this entry." ::= { snMspsDot1adPbDstIpAddrSVlanEntry 2 } snMspsDot1adPbDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbDstIpAddrSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,SourceIP Address, DestinationIP Address based -- Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbSrcDstIpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbSrcDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Source IP Address, per Destination IP Address based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { snMspsDot1adPbConfig 10} snMspsDot1adPbSrcDstIpSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbSrcDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source and Destination IP Address in the IP header of the frame as specified in this entry." INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcDstSrcIpAddr, snMspsDot1adPbSrcDstDstIpAddr } ::= { snMspsDot1adPbSrcDstIpSVlanTable 1 } SnMspsDot1adPbSrcDstIpSVlanEntry ::= SEQUENCE { snMspsDot1adPbSrcDstSrcIpAddr IpAddress, snMspsDot1adPbSrcDstDstIpAddr IpAddress, snMspsDot1adPbSrcDstIpSVlan VlanId, snMspsDot1adPbSrcDstIpRowStatus RowStatus } snMspsDot1adPbSrcDstSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source IP Address in the IP header of an ingress IP frame at this specified port." ::= { snMspsDot1adPbSrcDstIpSVlanEntry 1 } snMspsDot1adPbSrcDstDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { snMspsDot1adPbSrcDstIpSVlanEntry 2 } snMspsDot1adPbSrcDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames ingress at this port when the Source and Destination IP address in the IP header of the frame are same as specified in this entry." ::= { snMspsDot1adPbSrcDstIpSVlanEntry 3 } snMspsDot1adPbSrcDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbSrcDstIpSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based -- Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbCVlanDstIpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port, per Customer VLAN ID, per Destination IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as Provider Bridge or Provider Edge Bridge and the Port Type for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbConfig 11 } snMspsDot1adPbCVlanDstIpSVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbCVlanDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this entry and the Destination IP Address in the IP header of the frame as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstIpCVlan, snMspsDot1adPbCVlanDstIp } ::= { snMspsDot1adPbCVlanDstIpSVlanTable 1 } SnMspsDot1adPbCVlanDstIpSVlanEntry ::= SEQUENCE { snMspsDot1adPbCVlanDstIpCVlan VlanId, snMspsDot1adPbCVlanDstIp IpAddress, snMspsDot1adPbCVlanDstIpSVlan VlanId, snMspsDot1adPbCVlanDstIpRowStatus RowStatus } snMspsDot1adPbCVlanDstIpCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { snMspsDot1adPbCVlanDstIpSVlanEntry 1 } snMspsDot1adPbCVlanDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { snMspsDot1adPbCVlanDstIpSVlanEntry 2 } snMspsDot1adPbCVlanDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames ingress at this port when the classified Customer VLAN ID is same as specified in this entry and the Destination IP address in the IP header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { snMspsDot1adPbCVlanDstIpSVlanEntry 3 } snMspsDot1adPbCVlanDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbCVlanDstIpSVlanEntry 4 } -- ------------------------------------------------------------- -- The C-VLAN Port based Configuration Table -- ------------------------------------------------------------- snMspsDot1adPbPortBasedCVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbPortBasedCVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port mapping to Customer VLAN on a providerBridge. This table is used for a classifying a untagged frame received on above mentioned customer ports." ::= { snMspsDot1adPbConfig 12 } snMspsDot1adPbPortBasedCVlanEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbPortBasedCVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry in this table will be created whenever a port is configured as Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port.This Entry will be used on the ingress frame on the specified ports based on enabled status for classifying the frame to CVLAN. Also the Entry will be deleted in this table, when the port type is modified anything other than the specified one." INDEX { snMspsDot1adPbPort } ::= { snMspsDot1adPbPortBasedCVlanTable 1 } SnMspsDot1adPbPortBasedCVlanEntry ::= SEQUENCE { snMspsDot1adPbPortCVlan VlanId, snMspsDot1adPbPortCVlanClassifyStatus EnabledStatus } snMspsDot1adPbPortCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Customer VLAN ID assigned to untagged frames ingress at this specified Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { snMspsDot1adPbPortBasedCVlanEntry 1 } snMspsDot1adPbPortCVlanClassifyStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate C-VLAN classification status on a port. This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP, this object cannot be disabled." DEFVAL { enabled } ::= { snMspsDot1adPbPortBasedCVlanEntry 2 } -- ------------------------------------------------------------- -- EtherType SwappingTable -- ------------------------------------------------------------- snMspsDot1adPbEtherTypeSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbEtherTypeSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table containing the Translation information of the ethertype for a Service VLAN in a given packet. This Table shall be used only at ingress and NOT at egress of the Customer Network Port / Proprietary Customer Network Port / Provider Network Port. This translation table is applicable for only Service VLAN and not for customer VLAN's." ::= { snMspsDot1adPbConfig 13 } snMspsDot1adPbEtherTypeSwapEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbEtherTypeSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing the Local and Relay Ether type for a given packet on a particular port. This entry shall be applicable on all types of ports if and only if snMspsDot1adPbPortSVlanEtherTypeSwapStatus is Enabled on that Port." INDEX { snMspsDot1adPbPort, snMspsDot1adPbLocalEtherType} ::= { snMspsDot1adPbEtherTypeSwapTable 1 } SnMspsDot1adPbEtherTypeSwapEntry ::= SEQUENCE { snMspsDot1adPbLocalEtherType Integer32, snMspsDot1adPbRelayEtherType Integer32, snMspsDot1adPbEtherTypeSwapRowStatus RowStatus } snMspsDot1adPbLocalEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ether type present in the service vlan tag of the ingress packet at the given port." ::= { snMspsDot1adPbEtherTypeSwapEntry 1 } snMspsDot1adPbRelayEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Relay Ether type mapped for the ether type present in the local service vlan tag of the ingress packet at the given port." ::= { snMspsDot1adPbEtherTypeSwapEntry 2 } snMspsDot1adPbEtherTypeSwapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { snMspsDot1adPbEtherTypeSwapEntry 3 } -- ---------------------------------------------------------------- -- S-VLAN configuration table -- ---------------------------------------------------------------- snMspsDot1adPbSVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbSVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table to configure the service type supported by an S-VLAN. Based on the service type configured for the S-VLAN, the oper point-to-point state of PEP ports will be determined. The service type SET for S-VLAN is applicable only for the S-VLAN in specified Virtual Context identified by the Virtual Context identifier in this entry." ::= { snMspsDot1adPbConfig 14 } snMspsDot1adPbSVlanConfigEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbSVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The service type can be configured for an S-VLAN only when the VLAN is already created in the system." INDEX { snMspsDot1adPbContextId, dot1qVlanIndex } ::= { snMspsDot1adPbSVlanConfigTable 1 } SnMspsDot1adPbSVlanConfigEntry ::= SEQUENCE { snMspsDot1adPbSVlanConfigServiceType INTEGER } snMspsDot1adPbSVlanConfigServiceType OBJECT-TYPE SYNTAX INTEGER { eLine (1), eLan (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify the service type supported by the S-VLAN in the Virtual Context. When it is set to 'eLine', the S-VLAN connects not more than two customer interfaces. If the service type for a vlan is 'eLine', then learning member ports through GVRP will not be allowed. Hence the oper point-to-point state of the PEPs connecting the S-VLAN can be set to True for specified Virtual Context. When it is set to 'eLan', the S-VLAN connects more than two customer interfaces.So the oper point-to-point state of the PEPs connecting the S-VLAN will be set to False for specified Virtual Context. In case of IVL, When the service type is set to E-Line for a VLAN, the MAC learning status will be set to 'disabled'. When it is set to E-LAN, MAC learning status will be enabled for that VLAN." ::= { snMspsDot1adPbSVlanConfigEntry 1 } -- ---------------------------------------------------------------- -- Tunnel protocol configuration table -- ---------------------------------------------------------------- snMspsDot1adPbTunnelProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) inside service provider network." ::= { snMspsDot1adPbConfig 15 } snMspsDot1adPbTunnelProtocolEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbTunnelProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Provider Core or Provider Edge Bridges." INDEX { snMspsDot1adPbPort } ::= { snMspsDot1adPbTunnelProtocolTable 1 } SnMspsDot1adPbTunnelProtocolEntry ::= SEQUENCE { snMspsDot1adPbTunnelProtocolDot1x TunnelStatus, snMspsDot1adPbTunnelProtocolLacp TunnelStatus, snMspsDot1adPbTunnelProtocolStp TunnelStatus, snMspsDot1adPbTunnelProtocolGvrp TunnelStatus, snMspsDot1adPbTunnelProtocolGmrp TunnelStatus, snMspsDot1adPbTunnelProtocolIgmp TunnelStatus } snMspsDot1adPbTunnelProtocolDot1x OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 1 } snMspsDot1adPbTunnelProtocolLacp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the LACP packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 2 } snMspsDot1adPbTunnelProtocolStp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the STP packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 3 } snMspsDot1adPbTunnelProtocolGvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the GVRP packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 4 } snMspsDot1adPbTunnelProtocolGmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the GMRP packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 5 } snMspsDot1adPbTunnelProtocolIgmp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The object to specify whether to peer/tunnel/discard the IGMP packets received on this port." ::= { snMspsDot1adPbTunnelProtocolEntry 6 } -- ---------------------------------------------------------------- -- Tunnel protocol statistics table -- ---------------------------------------------------------------- snMspsDot1adPbTunnelProtocolStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received and transmitted over a port." ::= { snMspsDot1adPbConfig 16 } snMspsDot1adPbTunnelProtocolStatsEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Provider Core or Provider Edge Bridges." INDEX { snMspsDot1adPbPort } ::= { snMspsDot1adPbTunnelProtocolStatsTable 1 } SnMspsDot1adPbTunnelProtocolStatsEntry ::= SEQUENCE { snMspsDot1adPbTunnelProtocolDot1xPktsRecvd Counter32, snMspsDot1adPbTunnelProtocolDot1xPktsSent Counter32, snMspsDot1adPbTunnelProtocolLacpPktsRecvd Counter32, snMspsDot1adPbTunnelProtocolLacpPktsSent Counter32, snMspsDot1adPbTunnelProtocolStpPDUsRecvd Counter32, snMspsDot1adPbTunnelProtocolStpPDUsSent Counter32, snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd Counter32, snMspsDot1adPbTunnelProtocolGvrpPDUsSent Counter32, snMspsDot1adPbTunnelProtocolGmrpPktsRecvd Counter32, snMspsDot1adPbTunnelProtocolGmrpPktsSent Counter32, snMspsDot1adPbTunnelProtocolIgmpPktsRecvd Counter32, snMspsDot1adPbTunnelProtocolIgmpPktsSent Counter32 } snMspsDot1adPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled Dot1x Packets received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 1 } snMspsDot1adPbTunnelProtocolDot1xPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled Dot1x Packets transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 2 } snMspsDot1adPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled LACP Packets received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 3 } snMspsDot1adPbTunnelProtocolLacpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled LACP packets transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 4 } snMspsDot1adPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled STP PDUs received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 5 } snMspsDot1adPbTunnelProtocolStpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled STP PDUs transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 6 } snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled GVRP PDUs received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 7 } snMspsDot1adPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled GVRP PDUs transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 8 } snMspsDot1adPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled GMRP PDUs packets received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 9 } snMspsDot1adPbTunnelProtocolGmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled GMRP packets transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 10 } snMspsDot1adPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled IGMP packets received." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 11 } snMspsDot1adPbTunnelProtocolIgmpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of tunneled IGMP packets transmitted." ::= { snMspsDot1adPbTunnelProtocolStatsEntry 12 } -- ---------------------------------------------------------------- -- Provider Edge Port configuration table -- ---------------------------------------------------------------- snMspsDot1adPbPepExtTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDot1adPbPepExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an extention of dot1adMIPepTable table, and it provides additional configurations to PEPs (like Cos Preservations,..). when a entry in dot1adMIPepTable is created, then an entry will be created in this table." ::= { snMspsDot1adPbConfig 17 } snMspsDot1adPbPepExtEntry OBJECT-TYPE SYNTAX SnMspsDot1adPbPepExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains information like (COS preservation, ..) for the internal PEPs. Creation of an entry in this table is not allowed and only modification is allowed." AUGMENTS { snMspsDot1adPepEntry } ::= { snMspsDot1adPbPepExtTable 1 } SnMspsDot1adPbPepExtEntry ::= SEQUENCE { snMspsDot1adPbPepExtCosPreservation EnabledStatus } snMspsDot1adPbPepExtCosPreservation OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable COS preservation for a service provided by this PEP." DEFVAL { disabled } ::= { snMspsDot1adPbPepExtEntry 1 } -- -- NTP Module common Objects. -- snMspsNtpCommon OBJECT IDENTIFIER ::= { snMspsNtp 1 } -- -- NTP Client Module Objects. -- snMspsNtpClient OBJECT IDENTIFIER ::= { snMspsNtp 2 } -- -- NTP Server Module Objects. (For future implementations.) -- snMspsNtpServer OBJECT IDENTIFIER ::= { snMspsNtp 3 } -- -- Textual Conventions -- NTPSignedTimeValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The time in seconds that could represent signed quantities like time delay with respect to some source." SYNTAX Integer32 NTPStratum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)" SYNTAX Integer32 (0..255 ) NTPRefId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The reference clock identifier. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string as defined in RFC-1305. In the case of stratum 2 and greater (secondary reference) this is the four-octet Internet address of the peer selected for synchronization." SYNTAX OCTET STRING (SIZE (4)) NTPAssocIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The association identifier of the peer. Every peer with which an NTP server is associated with is identified by an association identifier." SYNTAX Integer32 (1..2147483647) -- -- NTP Common System Informations -- snMspsNtpCommonSysStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP module functionality Operational status, if it is enabled it will send the NTP Message to the peer and synchronize peer and or synchronized by peer. setting this value is depends on other TIME Modules like SNPT, SINEC, ..." DEFVAL { disabled } ::= { snMspsNtpCommon 1 } snMspsNtpCommonTimeZoneDiffTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the Timezone Diff Time with the UTC Time representation or any other ime representation. format is +/-HH:MM" -- DEFVAL { "+00:00" } ::= { snMspsNtpCommon 2 } snMspsNtpCommonSysDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object give the current system date and time." ::= { snMspsNtpCommon 3 } snMspsNtpCommonTraceFlag OBJECT-TYPE SYNTAX Unsigned32 (0.. 255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to configure the trace level of the NTP module. Find the values and corresponding trace information 1.Disable traces 0x00000000 2.Error traces 0x00000001 3.Failure traces 0x00000002 4.Info traces 0x00000004 5.HighInfo traces 0x00000008 6.Debug traces 0x00000010 7.All traces 0x000000ff and it can be combination of the all above." DEFVAL { 0 } ::= { snMspsNtpCommon 4 } -- -- NTP Client Configuration Table Informations -- snMspsNtpClientPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNtpClientPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information on the peers with which the local NTP has associations. The peers are also NTP servers but running on different hosts." ::= { snMspsNtpClient 1 } snMspsNtpClientPeerEntry OBJECT-TYPE SYNTAX SnMspsNtpClientPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier." INDEX { snMspsNtpClientPeerAssocId } ::= { snMspsNtpClientPeerTable 1 } SnMspsNtpClientPeerEntry ::= SEQUENCE { snMspsNtpClientPeerAssocId NTPAssocIdentifier, snMspsNtpClientPeerPeerAddrType InetAddressType, snMspsNtpClientPeerPeerInetAddress InetAddress, snMspsNtpClientPeerPeerPort Integer32, snMspsNtpClientPeerPeerStratum NTPStratum, snMspsNtpClientPeerPeerPrecision Integer32, snMspsNtpClientPeerPeerRefId NTPRefId, snMspsNtpClientPeerHostPoll Integer32, snMspsNtpClientPeerHostOffset NTPSignedTimeValue, snMspsNtpClientPeerHostDelay NTPSignedTimeValue, snMspsNtpClientPeerEntryStatus RowStatus, snMspsNtpClientPeerSecureKeyID Integer32, snMspsNtpClientPeerSecureAlgorithm INTEGER, snMspsNtpClientPeerSecureKey OCTET STRING } snMspsNtpClientPeerAssocId OBJECT-TYPE SYNTAX NTPAssocIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer value greater than 0 that uniquely identifies a peer with which the local NTP server/client is associated. This value is depends on the no of client entries support by the NTP implementation. If an entry creation throughs error as worng-value it may be reached the no of client entries support by the NTP implementation." ::= { snMspsNtpClientPeerEntry 1 } snMspsNtpClientPeerPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the type of the corresponding instance of snMspsNtpClientPeerPeerInetAddress object." DEFVAL { ipv4 } ::= { snMspsNtpClientPeerEntry 2 } snMspsNtpClientPeerPeerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the peer. When creating a new association, a value must be set forthis object before the row is made active." ::= { snMspsNtpClientPeerEntry 3 } snMspsNtpClientPeerPeerPort OBJECT-TYPE SYNTAX Integer32 (123 | 1025..36564) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number on which the peer receives NTP messages." DEFVAL { 123 } ::= { snMspsNtpClientPeerEntry 4 } snMspsNtpClientPeerPeerStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of the peer clock." ::= { snMspsNtpClientPeerEntry 5 } snMspsNtpClientPeerPeerPrecision OBJECT-TYPE SYNTAX Integer32 (-20..20 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms)." ::= { snMspsNtpClientPeerEntry 6 } snMspsNtpClientPeerPeerRefId OBJECT-TYPE SYNTAX NTPRefId MAX-ACCESS read-only STATUS current DESCRIPTION "The reference identifier of the peer." ::= { snMspsNtpClientPeerEntry 7 } snMspsNtpClientPeerHostPoll OBJECT-TYPE SYNTAX Integer32 (64..2678400) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which the local host polls the peer. The minimum interval between transmitted NTP messages, in seconds." DEFVAL { 64 } ::= { snMspsNtpClientPeerEntry 8 } snMspsNtpClientPeerHostOffset OBJECT-TYPE SYNTAX NTPSignedTimeValue UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated offset of the the local clock relative to the peer clock, in seconds. The host determines the value of this object using the NTP clock-filter algorithm." ::= { snMspsNtpClientPeerEntry 9 } snMspsNtpClientPeerHostDelay OBJECT-TYPE SYNTAX NTPSignedTimeValue UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated round-trip delay of the local clock relative to the peer clock over the network path between them, in seconds. The host determines the value of this object using the NTP clock-filter algorithm." ::= { snMspsNtpClientPeerEntry 10 } snMspsNtpClientPeerEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object for this row. When a management station is creating a new row, it should set the value for snMspsNtpClientPeerPeerInetAddress at least, before the row can be made active(1). If an entry creation through error as worng-value it may be reached the no of client entries support by the NTP implementation. any set for the read-write objects in the table are needs to be done by making the this objects as notinservice (2). otherwise it have effect on next active only." ::= { snMspsNtpClientPeerEntry 11 } snMspsNtpClientPeerSecureKeyID OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of the key, to tell the secure NTP server which key is used." DEFVAL { 1 } ::= { snMspsNtpClientPeerEntry 24 } snMspsNtpClientPeerSecureAlgorithm OBJECT-TYPE SYNTAX INTEGER { des(1), md5(2), sha1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Hash algorithm, which is used in secure NTP." DEFVAL { 1 } ::= { snMspsNtpClientPeerEntry 25 } snMspsNtpClientPeerSecureKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Secure key, which is used in secure NTP during authenti-cation. The key is encrypted before saving in configuration." ::= { snMspsNtpClientPeerEntry 29 } -- global setting for Secure NTP snMspsNtpClientPeerSecure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables support of secure NTP." DEFVAL { false } ::= { snMspsNtpClient 5 } snMspsNtpServerStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable NTP module Server module. If it is enabled NTP Clients will get the time from the Servers. " DEFVAL { disabled } ::= { snMspsNtpServer 1 } snMspsNtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsNtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information on the ntp servers." ::= { snMspsNtpServer 2 } snMspsNtpServerEntry OBJECT-TYPE SYNTAX SnMspsNtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the ip interfaces." INDEX { ifIndex } ::= { snMspsNtpServerTable 1 } SnMspsNtpServerEntry ::= SEQUENCE { snMspsNtpServerEnable TruthValue, snMspsNtpServerPort Integer32, snMspsNtpServerSecureStatus TruthValue, snMspsNtpServerKeyID Integer32, snMspsNtpServerSecureAlgorithm INTEGER, snMspsNtpServerSecureKey OCTET STRING, snMspsNtpServerRowStatus RowStatus } snMspsNtpServerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables NTP Server of an interface." DEFVAL { false } ::= { snMspsNtpServerEntry 1 } snMspsNtpServerPort OBJECT-TYPE SYNTAX Integer32 (123 | 1025..36564) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number on which the peer receives NTP messages." DEFVAL { 123 } ::= { snMspsNtpServerEntry 2 } snMspsNtpServerSecureStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables NTP Secure Server of an interface." DEFVAL { false } ::= { snMspsNtpServerEntry 3 } snMspsNtpServerKeyID OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Ntp key index." DEFVAL { 1 } ::= { snMspsNtpServerEntry 4 } snMspsNtpServerSecureAlgorithm OBJECT-TYPE SYNTAX INTEGER { des(1), md5(2), sha1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Hash algorithm, which is used in secure NTP Server." DEFVAL { 1 } ::= { snMspsNtpServerEntry 5 } snMspsNtpServerSecureKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Secure key, which is used in secure NTP Server during authentication. The key is encrypted before saving in configuration." ::= { snMspsNtpServerEntry 6 } snMspsNtpServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object for this row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { snMspsNtpServerEntry 7 } -- the following OID is reserved for global Secure NTP Server -- of this MIB module: { snMspsNtpServer 3 } -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- -- SN-MSPS-NTP-MIB 2101 ... 2150 snMspsTrapNTPInvalidConfiguration NOTIFICATION-TYPE STATUS current DESCRIPTION "Invalid NTP Configuration." ::= { snMspsTrapPrefix 2101 } snMspsTrapNTPWrongPacketLength NOTIFICATION-TYPE STATUS current DESCRIPTION "Received NTP Packet with wrong length." ::= { snMspsTrapPrefix 2102 } snMspsTrapNTPWrongSourceAddress NOTIFICATION-TYPE STATUS current DESCRIPTION "Received NTP Packet from wrong Source Address." ::= { snMspsTrapPrefix 2103 } snMspsTrapNTPWrongKeyId NOTIFICATION-TYPE STATUS current DESCRIPTION "Received NTP Packet with wrong or missing Key Id." ::= { snMspsTrapPrefix 2104 } snMspsTrapNTPAddAuthFail NOTIFICATION-TYPE STATUS current DESCRIPTION "Secure NTP failed to add authentication." ::= { snMspsTrapPrefix 2105 } snMspsTrapNTPVerifyAuthFail NOTIFICATION-TYPE STATUS current DESCRIPTION "Received NTP Packet failed authentication." ::= { snMspsTrapPrefix 2106 } snMspsTrapNTPKeyUpdate NOTIFICATION-TYPE STATUS current DESCRIPTION "SecureNTP Keys were updated." ::= { snMspsTrapPrefix 2107 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- snMspsSntpAdminStatus OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the sntp client module. All configuration will be acitve only when the SNTP module is enabled" DEFVAL { disabled } ::= { snMspsSntpClient 1 } snMspsSntpClientVersion OBJECT-TYPE SYNTAX INTEGER {version1 (1), version2 (2), version3 (3), version4 (4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The SNTP client module can run in any one version 1, version 2, version 3 or version 4. All the SNTP requests are sent out with the current configured version number. When required, the administrator can change the current version number" DEFVAL { version4 } ::= { snMspsSntpClient 2 } snMspsSntpClientAddressingMode OBJECT-TYPE SYNTAX INTEGER {unicast (1), broadcast (2), multicast (3), anycast (4)} MAX-ACCESS read-write STATUS current DESCRIPTION " unicast: - SNTP client operates in a point-to-point fashion. A unicast client sends a request to a designated server at its unicast address and expects a reply from which it can determine the time and, optionally, the round-trip delay and local clock ofsnMspset relative to the server. broadcast: - SNTP client operates in a point-to-multipoint fashion. The SNTP server uses an IP local broadcast address instead of a multicast address. The broadcast address is scoped to a single subnet, while a multicast address has Internet wide scope. multicast: - SNTP client operates in point-to-multipoint fashion. The SNTP server uses a multicast group address to send unsolicited SNTP messages to clients. The client listens on this address and sends no requests for updates. anycast: - SNTP client operates in a multipoint-to-point fashion. The SNTP client sends a request to a designated IPv4 or IPv6 local broadcast address or multicast group address. One or more anycast servers reply with their individual unicast addresses." DEFVAL { unicast } ::= { snMspsSntpClient 3 } snMspsSntpClientPort OBJECT-TYPE SYNTAX Integer32 ( 123 | 1025..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNTP client module by default listens on well-know port number 123. When required, the Administrator can change the SNTP Client port value to non-default." DEFVAL {123} ::= { snMspsSntpClient 4 } snMspsSntpTimeDisplayFormat OBJECT-TYPE SYNTAX INTEGER { hours (1), ampm (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The administrator can view the system time in 12 hr AM/PM or 24 hours format. " DEFVAL { hours } ::= { snMspsSntpClient 5 } snMspsSntpAuthKeyId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Key Identifier is an integer identifying the cryptographic key used to generate the message-authentication code" ::= { snMspsSntpClient 6 } snMspsSntpAuthAlgorithm OBJECT-TYPE SYNTAX INTEGER { none (0), md5 (1), des (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the NTP authentication scheme is implemented, the Key Identifier and Message Digest fields contain the message authentication code (MAC) information. Message Digest-5 (MD5) and Data Encryption Standard (DES) are the Authentication algorithms that can be used. Default Authentication supported is none" DEFVAL { none } ::= { snMspsSntpClient 7 } snMspsSntpAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key is cryptographic key that is used to implement NTP Authentication " ::= { snMspsSntpClient 8 } snMspsSntpTimeZone OBJECT-TYPE SYNTAX DisplayString (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "To set the system time zone with respect to UTC. ie plus indicates forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates backward time zone (behind UTC time eg: -03:30). The valid format is (+/-)HH:MM" ::= { snMspsSntpClient 9 } snMspsSntpDSTStartTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the evening. Many countries observe DST, although most have their own rules and regulations for when it begins and ends. The dates of DST may change from year to year. The Valid format [weekofmonth-weekofday-month,HH:MM]. Example:- Third-Mon-Apr,17:30 " ::= { snMspsSntpClient 10 } snMspsSntpDSTEndTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the evening. Many countries observe DST, although most have their own rules and regulations for when it begins and ends. The dates of DST may change from year to year. The Valid format [weekofmonth-weekofday-month,HH:MM]. Example:- Last-Sun-Nov,16:20 " ::= { snMspsSntpClient 11 } snMspsSntpServerAutoDiscovery OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION " The SNTP servers can be configured or discovered. When Auto Discover is disabled, the SNTP client gets the time from the configured servers. When Auto Discover is enabled, the SNTP client gets the time from servers learnt through DHPC client. This is valid only in Unicast Addressing mode." DEFVAL { disabled } ::= { snMspsSntpClient 12 } snMspsSntpUnicastPollInterval OBJECT-TYPE SYNTAX Unsigned32 (16..16284) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds between successive SNTP request transmissions. " DEFVAL { 64 } ::= {snMspsSntpClient 13 } snMspsSntpUnicastPollTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' " DEFVAL { 5 } ::= {snMspsSntpClient 14 } snMspsSntpUnicastPollRetry OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When the SNTP client queries a given server it will send 1 SNTP request frame. If that original attempt fails, the client will retry up to a maximum of 2 more times before giving up and attempting the next server." DEFVAL { 3 } ::= { snMspsSntpClient 15 } -- This table is for configuring the unicast server table snMspsSntpUnicastServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSntpUnicastServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains configured SNTP/NTP servers in the system." ::= {snMspsSntpClient 16 } snMspsSntpUnicastServerEntry OBJECT-TYPE SYNTAX SnMspsSntpUnicastServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry in the table contains necessary information to send SNTP request to the servers." INDEX {snMspsSntpUnicastServerAddrType, snMspsSntpUnicastServerAddr } ::= { snMspsSntpUnicastServerTable 1 } SnMspsSntpUnicastServerEntry ::= SEQUENCE { snMspsSntpUnicastServerAddrType InetAddressType, snMspsSntpUnicastServerAddr InetAddress, snMspsSntpUnicastServerVersion INTEGER, snMspsSntpUnicastServerPort Integer32, snMspsSntpUnicastServerType INTEGER, snMspsSntpUnicastServerLastUpdateTime DisplayString, snMspsSntpUnicastServerTxRequests Counter32, snMspsSntpUnicastServerRowStatus RowStatus } snMspsSntpUnicastServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Address type of the unicast server in the Unicast Addressing mode. It can be IPv4 or IPv6 unicast address." ::= { snMspsSntpUnicastServerEntry 1 } snMspsSntpUnicastServerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " The unicast IPv4/IPv6 server address in the Unicast Addressing mode " ::= { snMspsSntpUnicastServerEntry 2} snMspsSntpUnicastServerVersion OBJECT-TYPE SYNTAX INTEGER {version3 (3),version4 (4)} MAX-ACCESS read-write STATUS current DESCRIPTION "the sntp version supported by the server" ::= { snMspsSntpUnicastServerEntry 3 } snMspsSntpUnicastServerPort OBJECT-TYPE SYNTAX Integer32 ( 123 | 1025..36564) MAX-ACCESS read-write STATUS current DESCRIPTION "the sntp port on which the server is UP" ::= { snMspsSntpUnicastServerEntry 4 } snMspsSntpUnicastServerType OBJECT-TYPE SYNTAX INTEGER { primary (1), secondary (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In Unicast addressing mode, we can have primary and secondary servers. This flag is to distinguish between primary and secondary server. SNTP client sends request to different servers until it receives successful response. This flag tells the order in which to query the servers." ::= { snMspsSntpUnicastServerEntry 5 } snMspsSntpUnicastServerLastUpdateTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when the system time was successful" ::= { snMspsSntpUnicastServerEntry 6 } snMspsSntpUnicastServerTxRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SNTP request sent in the Unicast addressing mode." ::= { snMspsSntpUnicastServerEntry 7 } snMspsSntpUnicastServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " The activation of a row adds server entry. The destruction of a row removes server entry" ::= {snMspsSntpUnicastServerEntry 8} -- Broadcast objects snMspsSntpSendRequestInBcastMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "when enabled the sntp request will be sent to the broadcast server to calculate the dealy time. This is valid only in broadcast addressing mode" DEFVAL { disabled } ::= { snMspsSntpClient 17 } snMspsSntpPollTimeoutInBcastMode OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This is valid only in broadcast addressing mode " DEFVAL { 5 } ::= {snMspsSntpClient 18 } snMspsSntpDelayTimeInBcastMode OBJECT-TYPE SYNTAX Unsigned32 (1000..15000) UNITS "microseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " The broadcast server may send reply for the request. When the SNTP client does get response from the boradcast server, this value is taken as delay time " DEFVAL { 8000 } ::= { snMspsSntpClient 19 } -- snMspsSntpClient 20-22 reserved -- Multicast Objects snMspsSntpSendRequestInMcastMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION " when enabled the sntp request will be sent to the multicast server to calculate the dealy time." DEFVAL { disabled } ::= { snMspsSntpClient 23 } snMspsSntpPollTimeoutInMcastMode OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'" DEFVAL { 5 } ::= {snMspsSntpClient 24 } snMspsSntpDelayTimeInMcastMode OBJECT-TYPE SYNTAX Unsigned32 (1000..15000) UNITS "microseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " this is taken as delay time when there is no response from the multicast server " DEFVAL { 8000 } ::= { snMspsSntpClient 25 } snMspsSntpGrpAddrTypeInMcastMode OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION " The multicast group address can be configured by the administrator." ::= {snMspsSntpClient 26 } snMspsSntpGrpAddrInMcastMode OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The multicast group address can be configured by the administrator." ::= {snMspsSntpClient 27 } -- snMspsSntpClient 28-32 reserved -- Anycast Objects snMspsSntpAnycastPollInterval OBJECT-TYPE SYNTAX Unsigned32 (16..16284) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds between successive SNTP request transmissions." DEFVAL { 64 } ::= {snMspsSntpClient 33 } snMspsSntpAnycastPollTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'." DEFVAL { 5 } ::= {snMspsSntpClient 34 } snMspsSntpAnycastPollRetry OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When the SNTP client queries a given server it will send 1 SNTP request frame. If that original attempt fails, the client will retry up to a maximum of 2 more times before giving up and attempting the next server." DEFVAL { 3 } ::= { snMspsSntpClient 35 } snMspsSntpServerTypeInAcastMode OBJECT-TYPE SYNTAX INTEGER { broadcast (1), multicast (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To set the type of servers to be used in Anycast addressing mode" DEFVAL { broadcast } ::= { snMspsSntpClient 36 } snMspsSntpGrpAddrTypeInAcastMode OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type of the server configured by the administrator" ::= {snMspsSntpClient 37 } snMspsSntpGrpAddrInAcastMode OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast group address can be configured by the administrator." ::= {snMspsSntpClient 38 } -- -------------------------------------------------------------- -- Timezone and DST Sub-Group -- -------------------------------------------------------------- snMspsTimezone OBJECT IDENTIFIER ::= { snMspsDst 1 } snMspsTimezoneOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Show/Set timezone offset (min)." ::= { snMspsTimezone 1 } snMspsTimezoneDSTTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsTimezoneDSTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure DST entries." ::= { snMspsTimezone 2 } snMspsTimezoneDSTEntry OBJECT-TYPE SYNTAX SnMspsTimezoneDSTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry specifies the start and end of a daylight saving time." INDEX { snMspsTimezoneDSTIndex } ::= { snMspsTimezoneDSTTable 1 } SnMspsTimezoneDSTEntry ::= SEQUENCE { snMspsTimezoneDSTIndex INTEGER, snMspsTimezoneDSTName DisplayString, snMspsTimezoneDSTType INTEGER, snMspsTimezoneDSTDate DisplayString, snMspsTimezoneDSTRecurring DisplayString, snMspsTimezoneDSTRowStatus RowStatus } snMspsTimezoneDSTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this entry." ::= { snMspsTimezoneDSTEntry 1 } snMspsTimezoneDSTName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shows and sets the name of this entry." ::= { snMspsTimezoneDSTEntry 2 } snMspsTimezoneDSTType OBJECT-TYPE SYNTAX INTEGER { date(1), recurring(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes whether it is a static or a recurring entry." ::= { snMspsTimezoneDSTEntry 3 } snMspsTimezoneDSTDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight saving time information: year mmddhh(start) mmddhh(end)" ::= { snMspsTimezoneDSTEntry 4 } snMspsTimezoneDSTRecurring OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shows and sets the recurring information of this entry. Null if it is not a recurring entry." ::= { snMspsTimezoneDSTEntry 5 } snMspsTimezoneDSTRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { snMspsTimezoneDSTEntry 6 } snMspsPtpSystem OBJECT IDENTIFIER ::= { snMspsPtp 1 } snMspsPtpTransparentClock OBJECT IDENTIFIER ::= { snMspsPtp 2 } -- -------------------------------------------------------------- -- IEEE1588System Sub-Group -- -------------------------------------------------------------- snMspsPtpMode OBJECT-TYPE SYNTAX INTEGER { off(1), transparent-clock-mode (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable IEEE 1588 mode." DEFVAL { 1 } ::= { snMspsPtpSystem 1 } snMspsPtpTimeZoneDiffTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the Timezone Diff Time with the UTC Time representation or any other time representation. format is +/-HH:MM" DEFVAL { "+00:00" } ::= { snMspsPtpSystem 2 } -- -------------------------------------------------------------- -- IEEE1588 Transparent Clock Sub-Group -- -------------------------------------------------------------- snMspsPtpTCPrimaryDomainNumber OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Domain identifier of the primary synchronization domain. Clocks sharing a common domain identifier participate with one another in communication of time information and best master clock selection." DEFVAL { 0 } ::= { snMspsPtpTransparentClock 1 } snMspsPtpTCDelayMechanism OBJECT-TYPE SYNTAX INTEGER { end-to-end(1), peer-to-peer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the propagation delay measuring option used by the port in computing peerMeanPathDelay. If the transparent clock is an end-to-end transparent clock, delayMechanism shall be end-to-end(1). If the transparent clock is a peer-to-peer transparent clock, the value shall be peer-to-peer (2)." DEFVAL { 1 } ::= { snMspsPtpTransparentClock 2 } snMspsPtpTCSyntonized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "TRUE if transparent clock should syntonize to master, otherwise syntonization is disabled." DEFVAL { false } ::= { snMspsPtpTransparentClock 3 } snMspsPtpTCVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan that is used for IEEE 1588" DEFVAL { 1 } ::= { snMspsPtpTransparentClock 4 } snMspsPtpTCOneStep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "TRUE if transparent clock should use onestep, otherwise onestep is disabled." DEFVAL { true } ::= { snMspsPtpTransparentClock 5 } -- -------------------------------------------------------------- -- IEEE1588 Transparent Clock Port Table -- -------------------------------------------------------------- snMspsPtpTCPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPtpTCPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IEEE 1588 Transparent Clock Port Table." ::= { snMspsPtpTransparentClock 100 } snMspsPtpTCPortEntry OBJECT-TYPE SYNTAX SnMspsPtpTCPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IEEE 1588 Transparent Clock Port entry. " INDEX { snMspsPtpTCPortIfIndex } ::= { snMspsPtpTCPortTable 1 } SnMspsPtpTCPortEntry ::= SEQUENCE { snMspsPtpTCPortIfIndex INTEGER, snMspsPtpTCPortEnable INTEGER, snMspsPtpTCPortLogMinPdelayReqInterval INTEGER, snMspsPtpTCPortIngressLatency INTEGER, snMspsPtpTCPortEgressLatency INTEGER, snMspsPtpTCPortTransportMechanism INTEGER, snMspsPtpTCPortMeanPathDelay INTEGER, snMspsPtpTCPortFaultyFlag TruthValue } snMspsPtpTCPortIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port on which IEEE 1588 Transparent Clock occurs on." ::= { snMspsPtpTCPortEntry 1 } snMspsPtpTCPortEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable IEEE 1588 Transparent Clock on port." DEFVAL { 1 } ::= { snMspsPtpTCPortEntry 2 } snMspsPtpTCPortLogMinPdelayReqInterval OBJECT-TYPE SYNTAX INTEGER (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The logarithm to the base 2 of the minimum permitted mean time interval between successive Pdelay_Req messages, i.e., the minPdelayReqInterval, sent over a link." DEFVAL { 0 } ::= { snMspsPtpTCPortEntry 3 } snMspsPtpTCPortIngressLatency OBJECT-TYPE SYNTAX INTEGER (0..50000) MAX-ACCESS read-write STATUS current DESCRIPTION "IngressLantency: = + ingressLatency. IngressLatency in nano seconds" DEFVAL { 0 } ::= { snMspsPtpTCPortEntry 4 } snMspsPtpTCPortEgressLatency OBJECT-TYPE SYNTAX INTEGER (0..50000) MAX-ACCESS read-write STATUS current DESCRIPTION "EgressLatency: = + egressLatency. EgressLatency in nano seconds" DEFVAL { 0 } ::= { snMspsPtpTCPortEntry 5 } snMspsPtpTCPortTransportMechanism OBJECT-TYPE SYNTAX INTEGER { udp-ip-v4(1), udp-ip-v6(2), ethernet(3), devicenet(4), controlnet(5), profinet(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the transport protocols for PTP communications. See IEEE 1588-2008 Table 3 for networkProtocol enumerations." ::= { snMspsPtpTCPortEntry 6 } snMspsPtpTCPortMeanPathDelay OBJECT-TYPE SYNTAX INTEGER (0..50000) MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of delayMechanism is peer-to-peer (P2P), the value is an estimate of the current one-way propagation delay on the link, i.e., meanPathDelay, attached to this port computed using the peer delay mechanism. Delay is expressed in nanoseconds multiplied by 65536; a 1 second offset is expressed as 65536000000000. If the value of the portDelayMechanism member is end-to-end (E2E), the value is zero." ::= { snMspsPtpTCPortEntry 7 } snMspsPtpTCPortFaultyFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value shall be TRUE if the port is faulty and FALSE if the port is operating normally." ::= { snMspsPtpTCPortEntry 8 } snMspsPnioEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The value enabled(1) will automatically run PROFINET. The value disabled(2) will inhibit PROFINET." ::= { snMspsPnio 1 } snMspsPnioInDataExchange OBJECT-TYPE SYNTAX INTEGER { online (1), offline (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Show the state of PROFINETInDataExchange." ::= { snMspsPnio 2 } snMspsPnioNameOfStation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..240)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of Station of the device." ::= { snMspsPnio 3 } snMspsPnioInDataExchangeControl OBJECT-TYPE SYNTAX INTEGER { allow-online (1), force-to-offline (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "allow-online (1) allows the device to change in PROFINETInDataExchange online. force-to-offline (2) force the device to PROFINETInDataExchange offline." ::= { snMspsPnio 4 } snMspsPnioFaultMode OBJECT-TYPE SYNTAX INTEGER { latent(1), evident(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the PROFINET diagnostics behaviour for the PROFINET device: latent (1) - The device doesn't notify any PROFINET fault evident (2) - The device sets a fault if there is no connection to a PROFINET Controller The PROFINET Device sets the snPnioMode automatically to 'evident (2)' if the device ever established a connection to a PROFINET Controller" ::= { snMspsPnio 5 } snMspsPnioResetIpCfgOnRestart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, resets the (temporary) IP configuration to 0.0.0.0 when the device restarts and then also resets this object to false. Should thus be set to false whenever a new static IP configuration is set to avoid it being reset on restart." ::= { snMspsPnio 6 } snMspsPnioAdminStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(0), off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Shows the next Mode of PROFINET after the next reboot takes place." ::= { snMspsPnio 9 } snMspsPnioOperStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(0), off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the current Mode of PROFINET." ::= { snMspsPnio 10 } --HOLD_TIME_TABLE_BEGIN snMspsPnioHoldTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPnioHoldTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains Hold Time information." ::= { snMspsPnio 20 } snMspsPnioHoldTimeEntry OBJECT-TYPE SYNTAX SnMspsPnioHoldTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hold Time is stored." INDEX { snMspsPnioHoldTimeEntryIndex } ::= { snMspsPnioHoldTimeTable 1 } SnMspsPnioHoldTimeEntry ::= SEQUENCE { snMspsPnioHoldTimeEntryIndex Unsigned32, snMspsPnioHoldTimeValue INTEGER } snMspsPnioHoldTimeEntryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the Hold Time Entry" ::= { snMspsPnioHoldTimeEntry 1 } snMspsPnioHoldTimeValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Hold Time of an entry" ::= { snMspsPnioHoldTimeEntry 2 } --HOLD_TIME_TABLE_END snMspsIpIp OBJECT IDENTIFIER ::= { snMspsIp 1 } snMspsIpArp OBJECT IDENTIFIER ::= { snMspsIp 2 } snMspsIpIcmp OBJECT IDENTIFIER ::= { snMspsIp 3 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- snMspsIpInLengthErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received by IP with length less than IP header length." ::= { snMspsIpIp 1 } snMspsIpInCksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of received packets those failed to pass checksum verification." ::= { snMspsIpIp 2 } snMspsIpInVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets with different IP version from this entity." ::= { snMspsIpIp 3 } snMspsIpInTTLErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP packets received at this entity with 'Time to Live' field equal to ZERO" ::= { snMspsIpIp 4 } snMspsIpInOptionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP packets received with improper options." ::= { snMspsIpIp 5 } snMspsIpInBroadCasts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of IP broadcast packets received at this entity." ::= { snMspsIpIp 6 } snMspsIpOutGenErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing IP packets rejected due to general problems like interface down, forwarding disabled etc." ::= { snMspsIpIp 7 } snMspsIpOptProcEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indication as to if Option processing is active." DEFVAL { enabled } ::= { snMspsIpIp 9 } snMspsIpNumMultipath OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of multi-paths in the routing table." DEFVAL { 2 } ::= { snMspsIpIp 10 } snMspsIpLoadShareEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling this will distribute the load among available equal cost multi-paths." DEFVAL { disabled } ::= { snMspsIpIp 11 } snMspsIpEnablePMTUD OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object Enables or Disables PMTU-D on all paths globally. This MIB Object overrides the route-based and application-level requests for PMTU-D. When this object is set to disabled (2), PMTU-D is not done even if the application requests to do so." DEFVAL { disabled } ::= { snMspsIpIp 12 } snMspsIpPmtuEntryAge OBJECT-TYPE SYNTAX Integer32 (5..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the timeout in minutes, after which the estimate of a PMTU is considered stale. After the configured minutes the estimate of the PMTU is increased. When Set to inifinity (255), detection in increase of PMTU is not done." DEFVAL { 10 } ::= { snMspsIpIp 13 } -- the ICMP group snMspsIcmpSendRedirectEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Allow sending ICMP Redirect Message " DEFVAL { enabled } ::= { snMspsIpIcmp 1 } snMspsIcmpSendUnreachableEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Allow sending ICMP Unreachable Message " DEFVAL { enabled } ::= { snMspsIpIcmp 2 } snMspsIcmpSendEchoReplyEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Allow sending ICMP Echo Reply Message " DEFVAL { enabled } ::= { snMspsIpIcmp 3 } snMspsIcmpNetMaskReplyEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Allow sending ICMP Net Mask Reply Message " DEFVAL { enabled } ::= { snMspsIpIcmp 4 } snMspsIcmpTimeStampReplyEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Allow sending ICMP Time stamp reply Message " DEFVAL { enabled } ::= { snMspsIpIcmp 5 } snMspsIcmpInDomainNameRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Domain Name Requests received." ::= { snMspsIpIcmp 6 } snMspsIcmpInDomainNameReply OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Domain Name Replies received." ::= { snMspsIpIcmp 7 } snMspsIcmpOutDomainNameRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Domain Name Requests send." ::= { snMspsIpIcmp 8 } snMspsIcmpOutDomainNameReply OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Domain Name Replies send." ::= { snMspsIpIcmp 9 } snMspsIcmpDirectQueryEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Direct Query will be enabled or disabled accordingly" DEFVAL { disabled } -- By default disabled because this is an Experimental Protocol. ::= { snMspsIpIcmp 10 } snMspsDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Domain Name of the system, used to send when replies to DNS Direct Query." ::= { snMspsIpIcmp 11 } snMspsTimeToLive OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds untill which the name can be cached." ::= { snMspsIpIcmp 12 } snMspsIcmpInSecurityFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Security Failure messages received." ::= { snMspsIpIcmp 13 } snMspsIcmpOutSecurityFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Security Failure messages sent." ::= { snMspsIpIcmp 14 } snMspsIcmpSendSecurityFailuresEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow sending Security Failure messages." DEFVAL { enabled } ::= { snMspsIpIcmp 15 } snMspsIcmpRecvSecurityFailuresEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow Recieving Security Failure messages." DEFVAL { enabled } ::= { snMspsIpIcmp 16 } snMspsIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP addresses on every Interface." ::= { snMspsIpIp 18 } snMspsIpAddressEntry OBJECT-TYPE SYNTAX SnMspsIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The individual entry in the above table." INDEX { snMspsIpAddrTabAddress } ::= { snMspsIpAddressTable 1 } SnMspsIpAddressEntry ::= SEQUENCE { snMspsIpAddrTabIfaceId Integer32, snMspsIpAddrTabAddress IpAddress, snMspsIpAddrTabAdvertise TruthValue, snMspsIpAddrTabPreflevel Integer32, snMspsIpAddrTabStatus RowStatus } snMspsIpAddrTabIfaceId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number to which the IP address belongs to." ::= { snMspsIpAddressEntry 1 } snMspsIpAddrTabAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "One of the router's IP addresses." ::= { snMspsIpAddressEntry 2 } snMspsIpAddrTabAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A flag indicating whether or not the address is to be advertised." ::= { snMspsIpAddressEntry 3 } snMspsIpAddrTabPreflevel OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The preferability of the address as a default router address, relative to other router addresses on the same subnet. A 32-bit, signed, twos-complement integer, with higher values meaning more preferable." ::= { snMspsIpAddressEntry 4 } snMspsIpAddrTabStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsIpAddressEntry 5 } --List of Default Routers. snMspsIpRtrLstTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIpRtrLstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of default router addresses. Used when system functions as a host.Maintained as per RFC 1122." ::= { snMspsIpIp 19 } snMspsIpRtrLstEntry OBJECT-TYPE SYNTAX SnMspsIpRtrLstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The individual entry in the above table." INDEX { snMspsIpRtrLstAddress } ::= { snMspsIpRtrLstTable 1 } SnMspsIpRtrLstEntry ::= SEQUENCE { snMspsIpRtrLstIface Integer32, snMspsIpRtrLstAddress IpAddress, snMspsIpRtrLstPreflevel Integer32, snMspsIpRtrLstStatic TruthValue, snMspsIpRtrLstStatus RowStatus } snMspsIpRtrLstIface OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The interface via which the router could be reached." ::= { snMspsIpRtrLstEntry 1 } snMspsIpRtrLstAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP address of a default router." ::= { snMspsIpRtrLstEntry 2 } snMspsIpRtrLstPreflevel OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The preferability of the RouterAddress as a default router address, relative to other router addresses on the same subnet." ::= { snMspsIpRtrLstEntry 3 } snMspsIpRtrLstStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This entry states how the default router address was learned." ::= { snMspsIpRtrLstEntry 4 } snMspsIpRtrLstStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsIpRtrLstEntry 5 } -- IPIF table snMspsIpifTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIpifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP interface table which maintains the interface specific configurable parameters of IP." ::= { snMspsIpIp 23 } snMspsIpifEntry OBJECT-TYPE SYNTAX SnMspsIpifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular interface specific IP information." INDEX { snMspsIpifIndex } ::= { snMspsIpifTable 1 } SnMspsIpifEntry ::= SEQUENCE { snMspsIpifIndex Integer32, snMspsIpifMaxReasmSize Integer32, snMspsIpifIcmpRedirectEnable INTEGER, snMspsIpifDrtBcastFwdingEnable INTEGER, snMspsIpifProxyArpAdminStatus INTEGER } snMspsIpifIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in MIB II." ::= { snMspsIpifEntry 1 } snMspsIpifMaxReasmSize OBJECT-TYPE SYNTAX Integer32 (1024..33280) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum size of the fragmented IP datagram received on this interface that can be considered for reassembly." ::= { snMspsIpifEntry 2 } snMspsIpifIcmpRedirectEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling or Diabling of the ICMP redirect messages on an interface basis." ::= { snMspsIpifEntry 3 } snMspsIpifDrtBcastFwdingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling of Directed broadcast forwarding on that interface." ::= { snMspsIpifEntry 4 } snMspsIpifProxyArpAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables Proxy ARP Feature for that interface. By default, this object should have the value disabled(2)." DEFVAL { disabled } ::= { snMspsIpifEntry 5 } snMspsArpCacheTimeout OBJECT-TYPE SYNTAX Integer32 (30..86400) MAX-ACCESS read-write STATUS current DESCRIPTION " Time after which the entry in cache is deleted " DEFVAL { 7200 } ::= { snMspsIpArp 1 } snMspsArpCachePendTime OBJECT-TYPE SYNTAX Integer32 (30..3000) MAX-ACCESS read-write STATUS current DESCRIPTION " Time for which an unresolved entry will be held until response is received " DEFVAL { 30 } ::= { snMspsIpArp 2 } snMspsArpMaxRetries OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum number of retry attempts before aborting resolving " DEFVAL { 3 } ::= { snMspsIpArp 3 } snMspsArpTableScanType OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION " value of zero(0) disable arp table scan " DEFVAL { 4 } ::= { snMspsIpArp 4 } snMspsIpProxyArpClient OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Proxy ARP Client Feature. By default, this object should have the value disabled(2)." ::= { snMspsIpIp 25 } snMspsDcp OBJECT-TYPE SYNTAX INTEGER { dcp-read-write (1), dcp-read-only (2), dcp-off (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value dcp-read-write (1) will automatically run DCP (Detection & Configuration Protocoll). The value dcp-read-only allows DCP only to read parameters. The value dcp-off(3) will inhibit DCP." ::= { snMspsIpIp 30 } snMspsAgentReceiveOnAllKnownVLANs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connections on all the VLANs. For outgoing traffic like sending SNMP traps and connection to the e-mail server the Agent VLAN is used." ::= { snMspsIpIp 31 } -- It adds IP protocol independence. snMspsInetStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Static Routing table. This table displays both active and inactive static routes" ::= { snMspsIpIp 32 } snMspsInetStaticRouteEntry OBJECT-TYPE SYNTAX SnMspsInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy (as reflected in the snMspsInetStaticRoutePolicy object). Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in snMspsInetStaticRouteDest, snMspsInetStaticRoutePolicy, and snMspsInetStaticRouteNextHop exceeds 111, then OIDs of column instances in this table will have more than 128 sub- identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." INDEX { snMspsInetStaticRouteDestType, snMspsInetStaticRouteDest, snMspsInetStaticRoutePfxLen, snMspsInetStaticRoutePolicy, snMspsInetStaticRouteNextHopType, snMspsInetStaticRouteNextHop } ::= { snMspsInetStaticRouteTable 1 } SnMspsInetStaticRouteEntry ::= SEQUENCE { snMspsInetStaticRouteDestType InetAddressType, snMspsInetStaticRouteDest InetAddress, snMspsInetStaticRoutePfxLen InetAddressPrefixLength, snMspsInetStaticRoutePolicy OBJECT IDENTIFIER, snMspsInetStaticRouteNextHopType InetAddressType, snMspsInetStaticRouteNextHop InetAddress, snMspsInetStaticRouteIfIndex InterfaceIndexOrZero, snMspsInetStaticRouteType INTEGER, snMspsInetStaticRouteProto IANAipRouteProtocol, snMspsInetStaticRouteAge Gauge32, snMspsInetStaticRouteNextHopAS InetAutonomousSystemNumber, snMspsInetStaticRouteMetric1 Integer32, snMspsInetStaticRouteStatus RowStatus } snMspsInetStaticRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the snMspsInetStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object. IPv4 and IPv6 Static Routes are supported." ::= { snMspsInetStaticRouteEntry 1 } snMspsInetStaticRouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. The type of this address is determined by the value of the snMspsInetStaticRouteDestType object. IPv4 and IPv6 Static Routes are supported. The values for the index objects snMspsInetStaticRouteDest and snMspsInetStaticRoutePfxLen must be consistent. When the value of snMspsInetStaticRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object snMspsInetStaticRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests." ::= { snMspsInetStaticRouteEntry 2 } snMspsInetStaticRoutePfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the snMspsInetStaticRouteDest field. The values for the index objects snMspsInetStaticRouteDest and snMspsInetStaticRoutePfxLen must be consistent. When the value of snMspsInetStaticRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object snMspsInetStaticRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests." ::= { snMspsInetStaticRouteEntry 3 } snMspsInetStaticRoutePolicy OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the default value for this object." ::= { snMspsInetStaticRouteEntry 4 } snMspsInetStaticRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the snMspsInetStaticRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object. Only IPv4 Static Routes are supported currently" ::= { snMspsInetStaticRouteEntry 5 } snMspsInetStaticRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of the snMspsInetStaticRouteNextHopType object. Only IPv4 Static Routes are supported currently" ::= { snMspsInetStaticRouteEntry 6 } snMspsInetStaticRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value that identifies the local interface through which the next hop of this route should be reached. For active static routes this object will have a valid Interface index. For in-active static routes this object will have invalid interface index" ::= { snMspsInetStaticRouteEntry 7 } snMspsInetStaticRouteType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB reject (2), -- route that discards traffic and -- returns ICMP notification local (3), -- local interface remote (4), -- remote destination blackhole(5) -- route that discards traffic -- silently } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed, even if the implementation keeps them stored internally. reject(2) refers to a route that, if matched, discards the message as unreachable and returns a notification (e.g., ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. blackhole(5) refers to a route that, if matched, discards the message silently." ::= { snMspsInetStaticRouteEntry 8 } snMspsInetStaticRouteProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. Dyanmic routes are not supported in this MIB Table. This table supports only active and inactive of IPv4 and IPV6 Static Routes." ::= { snMspsInetStaticRouteEntry 9 } snMspsInetStaticRouteAge OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except through knowledge of the routing protocol by which the route was learned." ::= { snMspsInetStaticRouteEntry 10 } snMspsInetStaticRouteNextHopAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's snMspsInetStaticRouteProto value. When this object is unknown or not relevant, its value should be set to zero." DEFVAL { 0 } ::= { snMspsInetStaticRouteEntry 11 } snMspsInetStaticRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsInetStaticRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { snMspsInetStaticRouteEntry 12 } snMspsInetStaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1)." ::= { snMspsInetStaticRouteEntry 13 } snMspsRcdpMode OBJECT-TYPE SYNTAX INTEGER { rcdp-off (0), rcdp-read-only (1), rcdp-read-write (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value rcdp-read-write(2) allows RCDP to read and write parameters. The value rcdp-read-only(1) allows RCDP only read parameters. The value rcdp-off(0) will inhibit RCDP." ::= { snMspsIpIp 33 } snMspsTraceRouteConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsTraceRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TraceRoute Configuration Table" ::= { snMspsIpIp 40 } snMspsTraceRouteConfigEntry OBJECT-TYPE SYNTAX SnMspsTraceRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table Contains the configuration information about a particular traceroute operation." INDEX { snMspsTraceRouteConfigDestType, snMspsTraceRouteConfigDest } ::= { snMspsTraceRouteConfigTable 1 } SnMspsTraceRouteConfigEntry ::= SEQUENCE { snMspsTraceRouteConfigDestType InetAddressType, snMspsTraceRouteConfigDest InetAddress, snMspsTraceRouteConfigOperStatus INTEGER, snMspsTraceRouteConfigError INTEGER, snMspsTraceRouteConfigRowStatus RowStatus } snMspsTraceRouteConfigDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address Type of trace route destination specified in snMspsTraceRouteConfigDest" ::= { snMspsTraceRouteConfigEntry 1 } snMspsTraceRouteConfigDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination address to which the route has to be traced." ::= { snMspsTraceRouteConfigEntry 2 } snMspsTraceRouteConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { notStarted (1), inProgress (2), completed (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Status for the traceroute operation." ::= { snMspsTraceRouteConfigEntry 3 } snMspsTraceRouteConfigError OBJECT-TYPE SYNTAX INTEGER { noError (0), destinationUnreachable (1), addressUnreachable (2), ttlExceeded (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error Status after completion of traceroute operation." ::= { snMspsTraceRouteConfigEntry 4 } snMspsTraceRouteConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates and Initiates the traceroute operation for the destination snMspsTraceRouteConfigDest. Log for the traceroute operation can be viewed in snMspsTraceRouteTable." ::= { snMspsTraceRouteConfigEntry 5 } snMspsTraceRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsTraceRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing Trace route result for the destination specified in snMspsTraceRouteConfigTable." ::= { snMspsIpIp 43 } snMspsTraceRouteEntry OBJECT-TYPE SYNTAX SnMspsTraceRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about the intermediate nodes on the way to the destination specified in snMspsTraceRouteConfigTable." INDEX { snMspsTraceRouteDestType, snMspsTraceRouteDest, snMspsTraceRouteHopCount } ::= { snMspsTraceRouteTable 1 } SnMspsTraceRouteEntry ::= SEQUENCE { snMspsTraceRouteDestType InetAddressType, snMspsTraceRouteDest InetAddress, snMspsTraceRouteHopCount Unsigned32, snMspsTraceRouteIntermHopType InetAddressType, snMspsTraceRouteIntermHop InetAddress, snMspsTraceReachTime1 Integer32, snMspsTraceReachTime2 Integer32, snMspsTraceReachTime3 Integer32 } snMspsTraceRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address Type of trace route destination specified in snMspsTraceRouteDest" ::= { snMspsTraceRouteEntry 1 } snMspsTraceRouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination address to which the route has to be traced." ::= { snMspsTraceRouteEntry 2 } snMspsTraceRouteHopCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Count of the Number of Hops required to reach the intermediate node snMspsTraceRouteIntermHop." ::= { snMspsTraceRouteEntry 3 } snMspsTraceRouteIntermHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Address type for the snMspsTraceRouteIntermHop" ::= { snMspsTraceRouteEntry 4 } snMspsTraceRouteIntermHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of the intermediate node or the end destination snMspsTraceRouteDest." ::= { snMspsTraceRouteEntry 5 } snMspsTraceReachTime1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop. The value of '-1' denotes that the response was not received from the node snMspsTraceRouteDest." ::= { snMspsTraceRouteEntry 6 } snMspsTraceReachTime2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the second time. The value of '-1' denotes that the response was not received from the node snMspsTraceRouteDest." ::= { snMspsTraceRouteEntry 7 } snMspsTraceReachTime3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the third time. The value of '-1' denotes that the response was not received from the node snMspsTraceRouteDest." ::= { snMspsTraceRouteEntry 8 } -- Unused snMspsIpIp 44-49 snMspsIpNextHopArpKeepAliveStatus OBJECT-TYPE SYNTAX INTEGER { not-supported (0), enabled (1), disabled (2), dynamictostatic (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting of Value enabled(1), enables dynamic ARP Resolution for all the nexthop gateway addresses of the best routes present in the system and prevents ARP Table flushing. Dynamic ARP Resolution will be triggered every snMspsIpNextHopArpKeepAliveTime interval, for all the unresolved nexthop gateway addresses present in the system. Setting of Value dynamictostatic(3), does not prevent ARP table flushing, but converts the ARP entries for dynamically discovered nexthop gateway addresses to static ARP entries. Validity of these entries will then be checked cyclically. Setting of Value disabled(2), disables this feature." DEFVAL { disabled } ::= { snMspsIpIp 50 } snMspsIpNextHopArpKeepAliveTime OBJECT-TYPE SYNTAX Integer32 (30..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Time after which the dynamic ARP resolution will be triggered if snMspsIpNextHopArpKeepAliveStatus is true." DEFVAL { 30 } ::= { snMspsIpIp 51 } snMspsIpSingleHopInterVlanRouting OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the SingleHopInterVlanRouting - which enables routing in between connected/local routes even if the routing is not enabled/supported" DEFVAL { 2 } ::= { snMspsIpIp 52 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- snMspsIpACDModeStatus OBJECT-TYPE SYNTAX INTEGER { acdModeStatusDisabled (0), acdModeStatusEnabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether IPV4 Address Collision Detection is activated or not for all IP interfaces." DEFVAL { acdModeStatusEnabled } ::= { snMspsIpACD 1 } snMspsIpACDDefendingMode OBJECT-TYPE SYNTAX INTEGER { acdDefendingModeNeverGiveUp (0), acdDefendingModeAttemptToDefend (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies defending mode of IPV4 Address Collision Detection for all IP interfaces." DEFVAL { acdDefendingModeNeverGiveUp } ::= { snMspsIpACD 2 } -- ---------------------- -- snMspsIp6.mib -- -- SIEMENS AG -- Industry Automation Division -- -- IPv6 Proprietary MIB Definition -- -- -- Copyright (c) 2014 Siemens AG -- All rights reserved. -- ---------------------- -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- InterfaceList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight interfaces, with the first octet specifying router-ports 1 through 8, the second octet specifying router-ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered router-port or L3 interface, and the least significant bit represents the highest numbered port. Thus, each L3 interface of the switch is represented by a single bit within the value of this object. If that bit has a value of '1', then that L3 interface is included in the set of interfaces; the interface is not included if its bit has a value of '0'." SYNTAX OCTET STRING snMspsIpIp6 OBJECT IDENTIFIER ::= { snMspsIp6 1 } snMspsIp6Icmp OBJECT IDENTIFIER ::= { snMspsIp6 2 } snMspsIp6Udp OBJECT IDENTIFIER ::= { snMspsIp6 3 } snMspsIp6Tunnel OBJECT IDENTIFIER ::= {snMspsIp6 5 } snMspsIp6Route OBJECT IDENTIFIER ::= {snMspsIp6 6 } -- the IPv6 general group -- snMspsIpIp6 GROUP snMspsIp6Scalars OBJECT IDENTIFIER ::= { snMspsIpIp6 1 } snMspsIp6Tables OBJECT IDENTIFIER ::= { snMspsIpIp6 2 } -- snMspsIp6Scalars BEGIN snMspsIp6NdCacheMaxRetries OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of retries that can be attempted upon resolving the 'physical' address of an IPv6 address during address resolution or unreachability detection." DEFVAL { 3 } ::= { snMspsIp6Scalars 1 } snMspsIp6PmtuConfigStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to enable or disable Path MTU Discovery for the node." DEFVAL { enable } ::= { snMspsIp6Scalars 2 } snMspsIp6PmtuTimeOutInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time in minutes after which the path MTU entry times out." DEFVAL { 60 } ::= { snMspsIp6Scalars 3 } -- IPv6 Jumbograms Scalars snMspsIp6JumboEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to enable or disable IPv6 Jumbogram facility for the node." DEFVAL { enable } ::= { snMspsIp6Scalars 4 } snMspsIp6NumOfSendJumbo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv6 Jumbograms sent from the node." ::= { snMspsIp6Scalars 5 } snMspsIp6NumOfRecvJumbo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv6 Jumbograms received." ::= { snMspsIp6Scalars 6 } snMspsIp6ErrJumbo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv6 Error Jumbograms received or transmitted." ::= { snMspsIp6Scalars 7 } snMspsIp6GlobalDebug OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace. Different submodule Tracing - BIT 24 - Tracing in IP6 module. BIT 25 - Tracing in ICMP6 submodule. BIT 26 - Tracing in ND6 submodule. BIT 27 - Tracing in UDP6 submodule. BIT 29 - Tracing in PING6 submodule. The remaining bits are unused.The combination of levels and submodules are allowed i.e. Tracing can be allowed at all failure and data path level in All submodules by setting the BIT appropriately. For Example, setting the debug value to 00000001000000000000000001000000 will enable all failure trace prints in IP6 module." ::= { snMspsIp6Scalars 8 } -- sizing wanted scalars - begin -- These Values would come into effect, if only the router is rebooted -- after the configuration. The value of all the objects range from 1 -- to configured value, if the Minumum value is not specified in the -- 'DESCRIPTION' part. snMspsIp6MaxRouteEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of Route Entries that could be configured in the system. Minumum value is 5." ::= { snMspsIp6Scalars 9 } snMspsIp6MaxLogicalIfaces OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of configurable Logical IPv6 Interfaces" ::= { snMspsIp6Scalars 10 } snMspsIp6MaxTunnelIfaces OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of configurable Tunnel Interfaces" ::= { snMspsIp6Scalars 11 } snMspsIp6MaxAddresses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of Configurable IPv6 Interfaces." ::= { snMspsIp6Scalars 12 } snMspsIp6MaxFragReasmEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object could be used for 2 purpose. 1. Maximum Number of IP6 datagrams awaiting reassembly. 2. Maximum Number of fragments that could be allowed in a single reassembly list." ::= { snMspsIp6Scalars 13 } snMspsIp6Nd6MaxCacheEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of ND Cache Entries." ::= { snMspsIp6Scalars 14 } snMspsIp6PmtuMaxDest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Number of PMTU Table Entries" ::= { snMspsIp6Scalars 15 } -- sizing wanted scalars - end snMspsIp6RFC5095Compatibility OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type." DEFVAL {enabled} ::= { snMspsIp6Scalars 16 } -- snMspsIp6Scalars END -- snMspsIp6Tables BEGIN -- IPv6 Interface Table -- The IPv6 Interface table defines the logical interfaces on which -- IPv6 protocol is running. These include LAN interfaces, Point-to- -- Point interfaces, IPv6 over IPv4 Tunnel interfaces and NBMA -- interfaces. -- Entries of this table are created/deleted from SNMP. snMspsIp6IfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Interface table contains information on the entity's internetwork-layer interfaces on which IPv6. protocol is enabled. An IPv6 interface constitutes a logical network layer attachment to the layer immediately below IPv6. These include LAN interfaces, Point-to-Point interfaces, NBMA interfaces and IPv6 over IPv4 Tunnel interfaces." ::= { snMspsIp6Tables 1 } snMspsIp6IfEntry OBJECT-TYPE SYNTAX SnMspsIp6IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface entry containing objects about a particular IPv6 interface. The entry is created or deleted from SNMP." INDEX { snMspsIp6IfIndex } ::= { snMspsIp6IfTable 1 } SnMspsIp6IfEntry ::= SEQUENCE { snMspsIp6IfIndex InterfaceIndex, snMspsIp6IfType INTEGER, snMspsIp6IfPortNum Integer32, snMspsIp6IfCircuitNum Integer32, snMspsIp6IfToken OCTET STRING, snMspsIp6IfAdminStatus INTEGER, snMspsIp6IfOperStatus INTEGER, snMspsIp6IfRouterAdvStatus INTEGER, snMspsIp6IfRouterAdvFlags INTEGER, snMspsIp6IfHopLimit Integer32, snMspsIp6IfDefRouterTime Integer32, snMspsIp6IfReachableTime Integer32, snMspsIp6IfRetransmitTime Integer32, snMspsIp6IfDelayProbeTime Integer32, snMspsIp6IfPrefixAdvStatus INTEGER, snMspsIp6IfMinRouterAdvTime Integer32, snMspsIp6IfMaxRouterAdvTime Integer32, snMspsIp6IfDADRetries Integer32, snMspsIp6IfForwarding INTEGER, snMspsIp6IfRoutingStatus INTEGER, snMspsIp6IfIcmpErrInterval Integer32, snMspsIp6IfIcmpTokenBucketSize Integer32, snMspsIp6IfDestUnreachableMsg INTEGER, snMspsIp6IfAddressAutoConfStatus INTEGER } snMspsIp6IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the particular IPv6 interface." ::= { snMspsIp6IfEntry 1 } snMspsIp6IfType OBJECT-TYPE SYNTAX INTEGER { ethernetcsmacd(6), ppp(23), framerelay(32), tunnel(131), l3ipvlan(136) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface immediately `below' the network layer in the protocol stack." ::= { snMspsIp6IfEntry 2 } snMspsIp6IfPortNum OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the 'interface' over which this network interface operates and is dependent on the value of snMspsIp6IfType. This object reflects the ifindex value of ifTable." ::= { snMspsIp6IfEntry 3 } snMspsIp6IfCircuitNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the circuit over which this network interface operates and is dependent on the value of snMspsIp6IfType. If the data-link layer is Ethernet, PPP or IPv4 Tunnel, this object can have only value of zero. If the data-link layer is Frame Relay, this object requires a non-zero value which will identify the Frame Relay virtual circuit." ::= { snMspsIp6IfEntry 4 } snMspsIp6IfToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The address token for this interface that is (at least) unique on the link this interface is attached to. This token can be specified only if the snMspsIp6IfType is frame-relay(32). For other interface types, the interface token is autoconfigured according to the rules of the link type this interface is attached to. This address token is combined with the prefix 'fe80' to form a link-local IPv6 address on this interface." ::= { snMspsIp6IfEntry 5 } snMspsIp6IfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether IPv6 is enabled/disabled on this interface. When lower layer indicates the creation of the interface, an entry will be create in IPv6 interfac table with snMspsIp6IfAdminStatus in down(2) state. Either on setting this object as up(1) or configuring any IPv6 address over this interface, will set the snMspsIp6IfAdminStatus to up(1) state. If this object is set to down(2), and if no IPv6 address is configured for this interface, snMspsIp6IfAdminStatus goes down(2). Else the Status remains up(1), as long as the IPv6 address are present. Once these addresses are removed, the status goes to down(2)." ::= { snMspsIp6IfEntry 6 } snMspsIp6IfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), stale(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of interface. It is up(1) if the snMspsIp6IfAdminStatus is 'up' and the layer below the network layer is also operational. Otherwise it is down(2)." ::= { snMspsIp6IfEntry 7 } snMspsIp6IfRouterAdvStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The router advertisement status on this interface. When the object is set to enabled(1), router advertisements can be allowed on the IPv6 interface. Otherwise, router advertisements are not allowed." DEFVAL { disabled} ::= { snMspsIp6IfEntry 8 } snMspsIp6IfRouterAdvFlags OBJECT-TYPE SYNTAX INTEGER { mbit(1), obit(2), nombit(3), noobit(4), mobits(5), none(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the bits to be set in the router advertisements sent by this entity on this interface. M-bit set in the router advertisement indicates hosts to configure an address by stateful protocol means. O-bit set in the router advertisement indicates hosts to configure other non-address information by stateful means." DEFVAL { none } ::= { snMspsIp6IfEntry 9 } snMspsIp6IfHopLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Hop Limit value to be placed in the router advertisements sent on this IPv6 interface." DEFVAL { 64 } ::= { snMspsIp6IfEntry 10 } snMspsIp6IfDefRouterTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The default router time to be indicated in the router advertisements sent on this IPv6 interface. This defines the time in seconds for which this entity acts as the default router for all all hosts on the interface. A value of 0 indicates that the entity is not a default router. The value can be configured in the range between snMspsIp6IfMaxRouterAdvTime and 9000 seconds." DEFVAL { 0 } ::= { snMspsIp6IfEntry 11 } snMspsIp6IfReachableTime OBJECT-TYPE SYNTAX Integer32 (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The reachable time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds that a neighboring node is considered to be reachable after having received the reachability confirmation from that node." DEFVAL { 30 } ::= { snMspsIp6IfEntry 12 } snMspsIp6IfRetransmitTime OBJECT-TYPE SYNTAX Integer32 (1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The retransmit time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds between retransmitted Neighbor Solicitations and is used during address resolution, unreachability detection and duplicate address detection." DEFVAL { 1 } ::= { snMspsIp6IfEntry 13 } snMspsIp6IfDelayProbeTime OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds to delay before starting unreachability probing of neighbor entries which are stale." DEFVAL { 5 } ::= { snMspsIp6IfEntry 14 } snMspsIp6IfPrefixAdvStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The prefix advertisement status on this IPv6 interface. Object value enabled(1) allows the configured prefixes to be advertised in router advertisements. Otherwise, the prefixes are not sent in router advertisements." DEFVAL { enabled } ::= { snMspsIp6IfEntry 15 } snMspsIp6IfMinRouterAdvTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time in seconds allowed between sending unsolicited router advertisements.The default value is one-third the default value of snMspsIp6IfMaxRouterAdvTime. The value can be configured in the range between 3 seconds and three-fourth of snMspsIp6IfMaxRouterAdvTime." DEFVAL { 198 } ::= { snMspsIp6IfEntry 16 } snMspsIp6IfMaxRouterAdvTime OBJECT-TYPE SYNTAX Integer32 (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time in seconds between sending unsolicited router advertisements. Router advertisements are sent periodically at a random interval between the values specified by snMspsIp6IfMinRouterAdvTime and snMspsIp6IfMaxRouterAdvTime." DEFVAL { 600 } ::= { snMspsIp6IfEntry 17 } snMspsIp6IfDADRetries OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of neighbor solicitations sent for the purpose of duplicate address detection on a tentative address." DEFVAL { 1 } ::= { snMspsIp6IfEntry 18 } snMspsIp6IfForwarding OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object is used to configure IPv6 routing and forwarding on this interface. The default value is set to enabled." DEFVAL { 1 } ::= { snMspsIp6IfEntry 19 } snMspsIp6IfRoutingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object indicates the current routing status on this interface. This is based on the global IPv6 forwarding status of the mib object 'ipv6Forwarding'. If 'ipv6Forwarding' is set to disabled, the routing status is set to disabled on all the interfaces. If 'ipv6Forwarding' is set to enabled, the value taken by this MIB objet is same as 'snMspsIp6IfForwarding'" ::= { snMspsIp6IfEntry 20 } snMspsIp6IfIcmpErrInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval between tokens being added to the ICMPv6 token bucket." DEFVAL { 100 } ::= { snMspsIp6IfEntry 21 } snMspsIp6IfIcmpTokenBucketSize OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of tokens stored in the ICMPv6 bucket" DEFVAL { 10 } ::= { snMspsIp6IfEntry 22 } snMspsIp6IfDestUnreachableMsg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ICMPv6 destination unreachable messages are enabled/disabled on this interface." DEFVAL { enabled } ::= { snMspsIp6IfEntry 23 } snMspsIp6IfAddressAutoConfStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of stateless address auto-configuration (SLAAC) on this interface, i.e. whether to use prefix information from Router Advertisement packets to autoconfigure IPv6 address on this interface. This is applicable when the device is IPv6 host" DEFVAL { enabled } ::= { snMspsIp6IfEntry 24 } -- IPv6 Interface statistic table snMspsIp6IfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 interface traffic statistics" ::= { snMspsIp6Tables 2 } snMspsIp6IfStatsEntry OBJECT-TYPE SYNTAX SnMspsIp6IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface statistics entry containing objects at a particular IPv6 interface." INDEX { snMspsIp6IfStatsIndex } ::= { snMspsIp6IfStatsTable 1 } SnMspsIp6IfStatsEntry ::= SEQUENCE { snMspsIp6IfStatsIndex InterfaceIndex, snMspsIp6IfStatsInReceives Counter32, snMspsIp6IfStatsInHdrErrors Counter32, snMspsIp6IfStatsTooBigErrors Counter32, snMspsIp6IfStatsInAddrErrors Counter32, snMspsIp6IfStatsForwDatagrams Counter32, snMspsIp6IfStatsInUnknownProtos Counter32, snMspsIp6IfStatsInDiscards Counter32, snMspsIp6IfStatsInDelivers Counter32, snMspsIp6IfStatsOutRequests Counter32, snMspsIp6IfStatsOutDiscards Counter32, snMspsIp6IfStatsOutNoRoutes Counter32, snMspsIp6IfStatsReasmReqds Counter32, snMspsIp6IfStatsReasmOKs Counter32, snMspsIp6IfStatsReasmFails Counter32, snMspsIp6IfStatsFragOKs Counter32, snMspsIp6IfStatsFragFails Counter32, snMspsIp6IfStatsFragCreates Counter32, snMspsIp6IfStatsInMcastPkts Counter32, snMspsIp6IfStatsOutMcastPkts Counter32, snMspsIp6IfStatsInTruncatedPkts Counter32, snMspsIp6IfStatsInRouterSols Counter32, snMspsIp6IfStatsInRouterAdvs Counter32, snMspsIp6IfStatsInNeighSols Counter32, snMspsIp6IfStatsInNeighAdvs Counter32, snMspsIp6IfStatsInRedirects Counter32, snMspsIp6IfStatsOutRouterSols Counter32, snMspsIp6IfStatsOutRouterAdvs Counter32, snMspsIp6IfStatsOutNeighSols Counter32, snMspsIp6IfStatsOutNeighAdvs Counter32, snMspsIp6IfStatsOutRedirects Counter32, snMspsIp6IfStatsLastRouterAdvTime TimeTicks, snMspsIp6IfStatsNextRouterAdvTime TimeTicks, snMspsIp6IfStatsIcmp6ErrRateLmtd Counter32 } snMspsIp6IfStatsIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface for which this statistics are maintained. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6IfStatsEntry 1 } snMspsIp6IfStatsInReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { snMspsIp6IfStatsEntry 2 } snMspsIp6IfStatsInHdrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IPv6 options, etc." ::= { snMspsIp6IfStatsEntry 3 } snMspsIp6IfStatsTooBigErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of datagrams that could not be forwarded because their size exceeded the Path MTU" ::= { snMspsIp6IfStatsEntry 4 } snMspsIp6IfStatsInAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0) and unsupported addresses (e.g., addresses with unallocated prefixes). For entities which are not IPv6 routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { snMspsIp6IfStatsEntry 5 } snMspsIp6IfStatsForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IPv6 destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IPv6 routers, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { snMspsIp6IfStatsEntry 6 } snMspsIp6IfStatsInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { snMspsIp6IfStatsEntry 7 } snMspsIp6IfStatsInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { snMspsIp6IfStatsEntry 8 } snMspsIp6IfStatsInDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input datagrams successfully delivered to IPv6 user-protocols (including ICMP)." ::= { snMspsIp6IfStatsEntry 9 } snMspsIp6IfStatsOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied to IPv6 in requests for transmission. Note that this counter does not include any datagrams counted in snMspsIp6IfStatsForwDatagrams." ::= { snMspsIp6IfStatsEntry 10 } snMspsIp6IfStatsOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output IPv6 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in snMspsIp6IfStatsForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { snMspsIp6IfStatsEntry 11 } snMspsIp6IfStatsOutNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in snMspsIp6IfStatsForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default routers are down." ::= { snMspsIp6IfStatsEntry 12 } snMspsIp6IfStatsReasmReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 fragments received which needed to be reassembled at this entity." ::= { snMspsIp6IfStatsEntry 13 } snMspsIp6IfStatsReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 datagrams successfully reassembled." ::= { snMspsIp6IfStatsEntry 14 } snMspsIp6IfStatsReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IPv6 fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { snMspsIp6IfStatsEntry 15 } snMspsIp6IfStatsFragOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 datagrams that have been successfully fragmented at this entity." ::= { snMspsIp6IfStatsEntry 16 } snMspsIp6IfStatsFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this entity but could not be." ::= { snMspsIp6IfStatsEntry 17 } snMspsIp6IfStatsFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 datagram fragments that have been generated as a result of fragmentation at this entity." ::= { snMspsIp6IfStatsEntry 18 } snMspsIp6IfStatsInMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of multicast packets received by the interface" ::= { snMspsIp6IfStatsEntry 19 } snMspsIp6IfStatsOutMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of multicast packets transmitted by the interface" ::= { snMspsIp6IfStatsEntry 20 } snMspsIp6IfStatsInTruncatedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams discarded because datagram frame didn't carry enough data" ::= { snMspsIp6IfStatsEntry 21 } snMspsIp6IfStatsInRouterSols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Solicit messages received." ::= { snMspsIp6IfStatsEntry 22 } snMspsIp6IfStatsInRouterAdvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Advertisement messages received." ::= { snMspsIp6IfStatsEntry 23 } snMspsIp6IfStatsInNeighSols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Solicit messages received." ::= { snMspsIp6IfStatsEntry 24 } snMspsIp6IfStatsInNeighAdvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement messages received." ::= { snMspsIp6IfStatsEntry 25 } snMspsIp6IfStatsInRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Redirect messages received." ::= { snMspsIp6IfStatsEntry 26 } snMspsIp6IfStatsOutRouterSols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Solicit messages sent." ::= { snMspsIp6IfStatsEntry 27 } snMspsIp6IfStatsOutRouterAdvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Advertisement messages sent." ::= { snMspsIp6IfStatsEntry 28 } snMspsIp6IfStatsOutNeighSols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Solicitation messages sent." ::= { snMspsIp6IfStatsEntry 29 } snMspsIp6IfStatsOutNeighAdvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement messages sent." ::= { snMspsIp6IfStatsEntry 30 } snMspsIp6IfStatsOutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Redirect messages sent." ::= { snMspsIp6IfStatsEntry 31 } snMspsIp6IfStatsLastRouterAdvTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the last Periodic router advertisement was sent." ::= { snMspsIp6IfStatsEntry 32 } snMspsIp6IfStatsNextRouterAdvTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the next Periodic router advertisement is scheduled to be sent." ::= { snMspsIp6IfStatsEntry 33 } snMspsIp6IfStatsIcmp6ErrRateLmtd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of rate limited ICMP6 error messages " ::= { snMspsIp6IfStatsEntry 34 } -- IPv6 Prefix Table -- The IPv6 Prefix table contains this entity's IPv6 -- address prefix information that are advertised along -- with the route advertisement message. -- Entries are created/deleted from SNMP. snMspsIp6PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing entity's IPv6 address prefix information." ::= { snMspsIp6Tables 3 } snMspsIp6PrefixEntry OBJECT-TYPE SYNTAX SnMspsIp6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 Address Prefix Table which defines a prefix to be advertised in the route advertisement message send on an IPv6 interface." INDEX {snMspsIp6PrefixIndex, snMspsIp6PrefixAddress, snMspsIp6PrefixAddrLen } ::= { snMspsIp6PrefixTable 1 } SnMspsIp6PrefixEntry ::= SEQUENCE { snMspsIp6PrefixIndex InterfaceIndex, snMspsIp6PrefixAddress OCTET STRING, snMspsIp6PrefixAddrLen Integer32, snMspsIp6PrefixProfileIndex Integer32, snMspsIp6PrefixAdminStatus RowStatus, snMspsIp6SupportEmbeddedRp TruthValue } snMspsIp6PrefixIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this IPv6 address prefix entry is to be advertised. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6PrefixEntry 1 } snMspsIp6PrefixAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address prefix to which this entry's prefix information pertains." ::= { snMspsIp6PrefixEntry 2 } snMspsIp6PrefixAddrLen OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length of the prefix (in bits) associated with the IPv6 address prefix of this entry." ::= { snMspsIp6PrefixEntry 3 } snMspsIp6PrefixProfileIndex OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this prefix." DEFVAL { 0 } ::= { snMspsIp6PrefixEntry 4 } snMspsIp6PrefixAdminStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the administrative status of the prefix. CreateAndGo and NotInService are not supported." ::= { snMspsIp6PrefixEntry 5 } snMspsIp6SupportEmbeddedRp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to control the usage of associated IPv6 Prefix address as a valid embedded-RP prefix on specified interface" DEFVAL {false} ::= { snMspsIp6PrefixEntry 6 } -- IPv6 Address Table -- The IPv6 address table contains this entity's IPv6 -- addressing information. -- Entries are created/deleted from SNMP. snMspsIp6AddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing entity's IPv6 addressing information." ::= { snMspsIp6Tables 4 } snMspsIp6AddrEntry OBJECT-TYPE SYNTAX SnMspsIp6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 Address Table which defines a unicast, anycast or link-local address on an IPv6 interface." INDEX {snMspsIp6AddrIndex, snMspsIp6AddrAddress, snMspsIp6AddrPrefixLen } ::= { snMspsIp6AddrTable 1 } SnMspsIp6AddrEntry ::= SEQUENCE { snMspsIp6AddrIndex InterfaceIndex, snMspsIp6AddrAddress OCTET STRING, snMspsIp6AddrPrefixLen Integer32, snMspsIp6AddrAdminStatus RowStatus, snMspsIp6AddrType INTEGER, snMspsIp6AddrProfIndex Integer32, snMspsIp6AddrOperStatus INTEGER, snMspsIp6AddrScope InetScopeType } snMspsIp6AddrIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this IPv6 address entry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6AddrEntry 1 } snMspsIp6AddrAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address to which this entry's addressing information pertains." ::= { snMspsIp6AddrEntry 2 } snMspsIp6AddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length of the prefix (in bits) associated with the IPv6 address of this entry. For a link-local address, the prefix is always start with '0xfe80' and the prefix length is 128 bits." ::= { snMspsIp6AddrEntry 3 } snMspsIp6AddrAdminStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the address may trigger IPv6 to be disabled on the interface. NotInService value is not supported." ::= { snMspsIp6AddrEntry 4 } snMspsIp6AddrType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2), linklocal(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address while a link-local address has the prefix '0xfe80'. This object can be modified only if snMspsIp6AddrOperStatus is down." ::= { snMspsIp6AddrEntry 5 } snMspsIp6AddrProfIndex OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this address. For a link-local address, this object always takes the value zero and cannot be modified from SNMP." DEFVAL { 0 } ::= { snMspsIp6AddrEntry 6 } snMspsIp6AddrOperStatus OBJECT-TYPE SYNTAX INTEGER { tentative (1), -- DAD resolution going -- on on the address complete (2), -- DAD completed on the address down(3), -- address is operationally -- down failed(4) -- DAD failed for the address } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfaces on which Duplicate Address Detection is not performed, this object will take values only complete(2) and down(3)." ::= { snMspsIp6AddrEntry 7 } snMspsIp6AddrScope OBJECT-TYPE SYNTAX InetScopeType MAX-ACCESS read-only STATUS current DESCRIPTION " Scope is a 4-bit value that describes the scope of an IPV6 address.An unicast address can possibly have 2 scopes (Linklocal and Global) only. A multicast address can have a maximum of 11 scopes.The reserved scopes cannot be used by the user/administrator. Only unassigned multicast scoped can be configured and used in a given IPv6 domain as per the need." ::= { snMspsIp6AddrEntry 8 } -- IPv6 Address Profile Table -- This table contains parameters related to the advertisement of -- address prefixes. Since the prefix advertisement is done only on -- LAN interfaces, this information is kept separately from the IPv6 -- address table which contains addresses on all interfaces. -- Entries are created/deleted from SNMP except for the first profile -- entry which is autocreated and cannot be deleted. snMspsIp6AddrProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6AddrProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information for an address or set of addresses of the entity." ::= { snMspsIp6Tables 5 } snMspsIp6AddrProfileEntry OBJECT-TYPE SYNTAX SnMspsIp6AddrProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 Address Profile Table which contains parameters related to the advertisement of address prefixes. One or more IPv6 addresses refer to this profile through the object snMspsIp6AddrProfIndex in the snMspsIp6AddrTable. An entry of this table other than the first entry is created/deleted from SNMP." INDEX { snMspsIp6AddrProfileIndex } ::= { snMspsIp6AddrProfileTable 1 } SnMspsIp6AddrProfileEntry ::= SEQUENCE { snMspsIp6AddrProfileIndex Unsigned32, snMspsIp6AddrProfileStatus INTEGER, snMspsIp6AddrProfilePrefixAdvStatus INTEGER, snMspsIp6AddrProfileOnLinkAdvStatus INTEGER, snMspsIp6AddrProfileAutoConfAdvStatus INTEGER, snMspsIp6AddrProfilePreferredTime Unsigned32, snMspsIp6AddrProfileValidTime Unsigned32, snMspsIp6AddrProfileValidLifeTimeFlag INTEGER, snMspsIp6AddrProfilePreferredLifeTimeFlag INTEGER } snMspsIp6AddrProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the particular IPv6 Address profile entry. This is referred by snMspsIp6AddrProfIndex of IPv6 Address Table. The index 0 is created with default value during system start-up and this entry is not configurable." ::= { snMspsIp6AddrProfileEntry 1 } snMspsIp6AddrProfileStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2)." ::= { snMspsIp6AddrProfileEntry 2 } snMspsIp6AddrProfilePrefixAdvStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised in router advertisements sent by this entity. If it has value off(2), these address prefixes will not be advertised." DEFVAL { on } ::= { snMspsIp6AddrProfileEntry 3 } snMspsIp6AddrProfileOnLinkAdvStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with on-link flag set in the router advertisements sent by this entity. These prefixes can be used for on-link determination by hosts which receive these router advertisements. If the object has value off(2), these address prefixes will not not have the on-link flag set if advertised." DEFVAL { on } ::= { snMspsIp6AddrProfileEntry 4 } snMspsIp6AddrProfileAutoConfAdvStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with autonomous address configuration flag set in the router advertisements sent by this entity. These prefixes can be used for autonomous address configuration (i.e. can be used to form a local interface address) by hosts which receive these router advertisements. If the object has value off(2), these address prefixes will not not have the autonomous address configuration flag set if advertised." DEFVAL { on } ::= { snMspsIp6AddrProfileEntry 5 } snMspsIp6AddrProfilePreferredTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the preferred lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in router advertisements by this entity. A value of 4,294,967,295 represents infinity.This value should be less than snMspsIp6AddrProfileValidTime" DEFVAL { 604800 } ::= { snMspsIp6AddrProfileEntry 6 } snMspsIp6AddrProfileValidTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the valid lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in router advertisements by this entity. A value of 4,294,967,295 represents infinity." DEFVAL { 4294967295 } ::= { snMspsIp6AddrProfileEntry 7 } snMspsIp6AddrProfileValidLifeTimeFlag OBJECT-TYPE SYNTAX INTEGER { fixed (1), variable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting this flag to fixed (1),the router advertisement Valid life time value is set to fixed and by setting to variable(2), the router advertisement Valid life time value can decrease in real time. This flag will synchronise the router clocks." DEFVAL { fixed } ::= { snMspsIp6AddrProfileEntry 8 } snMspsIp6AddrProfilePreferredLifeTimeFlag OBJECT-TYPE SYNTAX INTEGER { fixed (1), variable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting this flag to fixed (1),the router advertisement Preferred life time value is set to fixed and by setting to variable(2), the router advertisement preferred life time value can decrease in real time. This flag will synchronise the router clocks." DEFVAL { fixed } ::= { snMspsIp6AddrProfileEntry 9 } -- Path MTU for IPv6 snMspsIp6PmtuTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6PmtuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Path MTU table. This table contains an entry for a specific path traversed by packets exchanged between the source and destination nodes." ::= { snMspsIp6Tables 6 } snMspsIp6PmtuEntry OBJECT-TYPE SYNTAX SnMspsIp6PmtuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Path MTU entry." INDEX { snMspsIp6PmtuDest } ::= { snMspsIp6PmtuTable 1 } SnMspsIp6PmtuEntry ::= SEQUENCE { snMspsIp6PmtuDest OCTET STRING, snMspsIp6Pmtu Integer32, snMspsIp6PmtuTimeStamp Integer32, snMspsIp6PmtuAdminStatus INTEGER } snMspsIp6PmtuDest OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IPv6 address of the packets to be exchanged." ::= { snMspsIp6PmtuEntry 1 } snMspsIp6Pmtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the path MTU value for the path." ::= { snMspsIp6PmtuEntry 2 } snMspsIp6PmtuTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the entry created time in the PMTU table." ::= { snMspsIp6PmtuEntry 3 } snMspsIp6PmtuAdminStatus OBJECT-TYPE SYNTAX INTEGER{ valid(1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired status of the PmtuTable. This variable has to be made valid(1) for creating a entry in the PmtuTable. If set to invalid(2), the entry is deleted." ::= { snMspsIp6PmtuEntry 4 } -- IPv6 Address Translation table for LAN interfaces -- The snMspsIp6NdLanCacheTable contain the Ipv6Address -- to `physical' address equivalences for on-link nodes -- on Ethernet. -- Static entries can be created/deleted from SNMP. Dynamic -- entries get created for neighbors upon IPv6 packet forwarding. snMspsIp6NdLanCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6NdLanCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on Ethernet." ::= { snMspsIp6Tables 7 } snMspsIp6NdLanCacheEntry OBJECT-TYPE SYNTAX SnMspsIp6NdLanCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon address resolution or statically from SNMP." INDEX { snMspsIp6NdLanCacheIfIndex, snMspsIp6NdLanCacheIPv6Addr } ::= { snMspsIp6NdLanCacheTable 1 } SnMspsIp6NdLanCacheEntry ::= SEQUENCE { snMspsIp6NdLanCacheIfIndex InterfaceIndex, snMspsIp6NdLanCacheIPv6Addr OCTET STRING, snMspsIp6NdLanCacheStatus INTEGER, snMspsIp6NdLanCachePhysAddr OCTET STRING, snMspsIp6NdLanCacheState INTEGER, snMspsIp6NdLanCacheUseTime TimeTicks } snMspsIp6NdLanCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdLanCache entry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6NdLanCacheEntry 1 } snMspsIp6NdLanCacheIPv6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address corresponding to the `physical' address on Ethernet." ::= { snMspsIp6NdLanCacheEntry 2 } snMspsIp6NdLanCacheStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the value invalid(2) effects in invalidating the corresponding entry in the snMspsIp6NdLanCacheTable. Otherwise, the entry remains valid." DEFVAL { valid } ::= { snMspsIp6NdLanCacheEntry 3 } snMspsIp6NdLanCachePhysAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The `physical' address on Ethernet." ::= { snMspsIp6NdLanCacheEntry 4 } snMspsIp6NdLanCacheState OBJECT-TYPE SYNTAX INTEGER { static(1), reachable(2), incomplete(3), stale(4), delay(5), probe(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reachability state of NdLanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value that correspond to the states of dynamically created entries." ::= { snMspsIp6NdLanCacheEntry 5 } snMspsIp6NdLanCacheUseTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding." ::= { snMspsIp6NdLanCacheEntry 6 } -- IPv6 Address Translation table for NBMA interfaces -- The snMspsIp6NdWanCacheTable contain the Ipv6Address -- to `physical' address equivalences for on-link nodes -- on NBMA interfaces. The 'physical address' actually refers -- to the IPv6 interface on which the Ipv6Address is on-link. -- Static entries can be created/deleted from SNMP. Dynamic -- entries get created for on-link nodes upon reception of -- IPv6 packet. snMspsIp6NdWanCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6NdWanCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on NBMA interface. The 'physical address' actually refers to the IPv6 interface on which the Ipv6Address is on-link." ::= { snMspsIp6Tables 8 } snMspsIp6NdWanCacheEntry OBJECT-TYPE SYNTAX SnMspsIp6NdWanCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon reception of IPv6 packet from an on-link source or statically from SNMP." INDEX { snMspsIp6NdWanCacheIfIndex, snMspsIp6NdWanCacheIPv6Addr } ::= { snMspsIp6NdWanCacheTable 1 } SnMspsIp6NdWanCacheEntry ::= SEQUENCE { snMspsIp6NdWanCacheIfIndex InterfaceIndex, snMspsIp6NdWanCacheIPv6Addr OCTET STRING, snMspsIp6NdWanCacheStatus INTEGER, snMspsIp6NdWanCacheState INTEGER, snMspsIp6NdWanCacheUseTime TimeTicks } snMspsIp6NdWanCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdWanCache entry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6NdWanCacheEntry 1 } snMspsIp6NdWanCacheIPv6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address of the on-link node on this NBMA interface." ::= { snMspsIp6NdWanCacheEntry 2 } snMspsIp6NdWanCacheStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the value 'invalid(2)' effects in invalidating the corresponding entry in the snMspsIp6NdWanCacheTable. Otherwise, the entry remains valid." DEFVAL { valid } ::= { snMspsIp6NdWanCacheEntry 3 } snMspsIp6NdWanCacheState OBJECT-TYPE SYNTAX INTEGER { static(1), reachable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reachability state of NdWanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value as 'reachable' that corresponds to the state of dynamically created entries." ::= { snMspsIp6NdWanCacheEntry 4 } snMspsIp6NdWanCacheUseTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding." ::= { snMspsIp6NdWanCacheEntry 5 } -- The IPv6 Ping table -- This table is used to generate IPv6 Echo requests from this -- entity to destinations. -- Entries are created/deleted from SNMP. snMspsIp6PingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6PingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IPv6 Ping Table." ::= { snMspsIp6Tables 12 } snMspsIp6PingEntry OBJECT-TYPE SYNTAX SnMspsIp6PingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the information about a particular IPv6 Ping operation. An entry is created/deleted from SNMP." INDEX { snMspsIp6PingIndex } ::= { snMspsIp6PingTable 1 } SnMspsIp6PingEntry ::= SEQUENCE { snMspsIp6PingIndex Integer32, snMspsIp6PingDest OCTET STRING, snMspsIp6PingIfIndex InterfaceIndex, snMspsIp6PingAdminStatus INTEGER, snMspsIp6PingInterval Integer32, snMspsIp6PingRcvTimeout Integer32, snMspsIp6PingTries Integer32, snMspsIp6PingSize Integer32, snMspsIp6PingSentCount Integer32, snMspsIp6PingAverageTime Integer32, snMspsIp6PingMaxTime Integer32, snMspsIp6PingMinTime Integer32, snMspsIp6PingOperStatus INTEGER, snMspsIp6PingSuccesses Counter32, snMspsIp6PingPercentageLoss Integer32, snMspsIp6PingData OCTET STRING, snMspsIp6PingSrcAddr OCTET STRING, snMspsIp6PingZoneId DisplayString, snMspsIp6PingDestAddrType INTEGER } snMspsIp6PingIndex OBJECT-TYPE SYNTAX Integer32(0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the particular IPv6 Ping entry." ::= { snMspsIp6PingEntry 1 } snMspsIp6PingDest OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the destination to be pinged. This should be a unicast or link-local address" ::= { snMspsIp6PingEntry 2 } snMspsIp6PingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this Ping is to be sent. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex. The value of this object is needed when pinging to a link-local destination, otherwise it is ignored." ::= { snMspsIp6PingEntry 3 } snMspsIp6PingAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), invalid(3), create(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired status for the ping operation. This variable has to be made up(1) for starting the ping operation. If set to down(2), the ping is stopped but the statistics will still be available. The entry is created when this variable is set to create(4) and deleted on setting this variable to invalid(3)." ::= { snMspsIp6PingEntry 4 } snMspsIp6PingInterval OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval in seconds between successive pings sent to the destination." DEFVAL { 1 } ::= { snMspsIp6PingEntry 5 } snMspsIp6PingRcvTimeout OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which this entity times out waiting for a particular ping response." DEFVAL { 5 } ::= { snMspsIp6PingEntry 6 } snMspsIp6PingTries OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the destination is to be pinged." DEFVAL { 5 } ::= { snMspsIp6PingEntry 7 } snMspsIp6PingSize OBJECT-TYPE SYNTAX Integer32 (32..2080) MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the data portion of the Ping packet." DEFVAL { 100 } ::= { snMspsIp6PingEntry 8 } snMspsIp6PingSentCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent to destination." ::= { snMspsIp6PingEntry 9 } snMspsIp6PingAverageTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of the round trip time in seconds to this destination." ::= { snMspsIp6PingEntry 10 } snMspsIp6PingMaxTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the round trip time in seconds to this destination." ::= { snMspsIp6PingEntry 11 } snMspsIp6PingMinTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of the round trip time in seconds to this destination." ::= { snMspsIp6PingEntry 12 } snMspsIp6PingOperStatus OBJECT-TYPE SYNTAX INTEGER { inprogress(1), notinprogress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of this ping operation." ::= { snMspsIp6PingEntry 13 } snMspsIp6PingSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ping responses received." ::= { snMspsIp6PingEntry 14 } snMspsIp6PingPercentageLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of lost packets for which no responses were received till timeout." ::= { snMspsIp6PingEntry 15 } snMspsIp6PingData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Data that should be sent in the Ping message" ::= { snMspsIp6PingEntry 16 } snMspsIp6PingSrcAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Source address to be used for the ping" ::= { snMspsIp6PingEntry 17 } snMspsIp6PingZoneId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Zone-Id shoule be able to identify a particular zone of the address's scope. This Zone id applies to all kinds of unicast and multicast addresses of non-global scope except the unspecified address. The zone-id is not supported for global address." REFERENCE "RFC4007" ::= { snMspsIp6PingEntry 18 } snMspsIp6PingDestAddrType OBJECT-TYPE SYNTAX INTEGER { other (0), anycast (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The address type of the destination to be pinged. other - unicast or linklocal address anycast - anycast address .An IPv6 packet cannot have anycast address as source address. So snMspsIp6PingDestAddrType is used to distinguish the anycast destination from other types." DEFVAL { 0 } ::= { snMspsIp6PingEntry 19 } -- Supoort for Proxy ND - START --snMspsIp6NDProxyTable BEGIN snMspsIp6NDProxyListTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6NDProxyListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configurable list of IPv6 Addresses for which Proxy Neighbor Discovery is desired." ::= { snMspsIp6Tables 13 } snMspsIp6NDProxyListEntry OBJECT-TYPE SYNTAX SnMspsIp6NDProxyListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ND Proxy Table. Each entry specifies the IPv6 address for which proxy feature is needed, and the adminstatus for the row." INDEX { snMspsIp6NdProxyAddr } ::= { snMspsIp6NDProxyListTable 1 } SnMspsIp6NDProxyListEntry ::= SEQUENCE { snMspsIp6NdProxyAddr OCTET STRING, snMspsIp6NdProxyAdminStatus INTEGER } snMspsIp6NdProxyAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 address for Proxy ND." ::= { snMspsIp6NDProxyListEntry 1 } snMspsIp6NdProxyAdminStatus OBJECT-TYPE SYNTAX INTEGER { create (1), invalid (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the ND Proxy list entry. When set to create(4) the IPv6 interface is created and invalid(4) to delete the interface." ::= { snMspsIp6NDProxyListEntry 2 } -- Supprot for Proxy ND - END -- Support for Address Selection Policy Table -START -- snMspsIp6AddrSelPolicyTable BEGIN snMspsIp6AddrSelPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6AddrSelPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for default address selection in IPv6. This table is used to configure the Precedence and Label associated with a source/destination address. The Address Selection Policy Table contains the following default entries - Prefix Precedence Label ::1/128 50 0 ::/0 40 1 2002::/16 30 2 ::/96 20 3 ::ffff:0:0/96 10 4 A lookup of this table aids in selection of best source/destination address from amongst a candidate list. " ::= { snMspsIp6Tables 14 } snMspsIp6AddrSelPolicyEntry OBJECT-TYPE SYNTAX SnMspsIp6AddrSelPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table entry is used to configure the following parameters for an IPv6 source/destination address - Prefix, PrefixLen,Ifindex,Preference,Label,Address Type,IsSelfAddress, IsAddressPublic, IsAddressDeprecated, ReachabilityStatus, ConfigStatus and Rowstatus" INDEX { snMspsIp6AddrSelPolicyPrefix, snMspsIp6AddrSelPolicyPrefixLen, snMspsIp6AddrSelPolicyIfIndex } ::= { snMspsIp6AddrSelPolicyTable 1 } SnMspsIp6AddrSelPolicyEntry ::= SEQUENCE { snMspsIp6AddrSelPolicyPrefix OCTET STRING, snMspsIp6AddrSelPolicyPrefixLen Integer32, snMspsIp6AddrSelPolicyIfIndex InterfaceIndex, snMspsIp6AddrSelPolicyScope Integer32, snMspsIp6AddrSelPolicyPrecedence Integer32, snMspsIp6AddrSelPolicyLabel Integer32, snMspsIp6AddrSelPolicyAddrType INTEGER, snMspsIp6AddrSelPolicyIsPublicAddr INTEGER, snMspsIp6AddrSelPolicyIsSelfAddr INTEGER, snMspsIp6AddrSelPolicyReachabilityStatus INTEGER, snMspsIp6AddrSelPolicyConfigStatus INTEGER, snMspsIp6AddrSelPolicyRowStatus RowStatus } snMspsIp6AddrSelPolicyPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address/Prefix for which the policy needs to be configured." ::= { snMspsIp6AddrSelPolicyEntry 1 } snMspsIp6AddrSelPolicyPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Prefix length associated with the IPV6 address identified by 'snMspsIp6AddrSelPolicyPrefix." ::= { snMspsIp6AddrSelPolicyEntry 2 } snMspsIp6AddrSelPolicyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. A value of 0 indicates that the associated address is reachable via any interface." ::= { snMspsIp6AddrSelPolicyEntry 3 } snMspsIp6AddrSelPolicyScope OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB object identifies the scope of the IPv6 address. This can take the following values based on whether the address is unicast/anycast or multicast. 0 reserved 1 Interface-Local scope 2 Link-Local scope 3 reserved 4 Admin-Local scope 5 Site-Local scope 6 (unassigned) 7 (unassigned) 8 Organization-Local scope 9 (unassigned) 10 (unassigned) 11 (unassigned) 12 (unassigned) 13 (unassigned) 14 Global scope 15 reserved Link-local and global scopes are applicable for unicast/anycast addresses. The following are valid multicast scopes - Interface-Local scope spans only a single interface on a node and is useful only for loopback transmission of multicast. Link-Local is used for uniquely identifying interfaces within a single link. Admin-Local scope is the smallest scope that must be administratively configured, i.e., not automatically derived from physical connectivity or other, non-multicast-related configuration. Site-Local scope is intended to span a single site. Organization-Local scope is intended to span multiple sites belonging to a single organization. Global scope is used for uniquely identifying interfaces anywhere in the Internet scopes labeled (unassigned) are available for administrators to define additional multicast regions." ::= { snMspsIp6AddrSelPolicyEntry 4 } snMspsIp6AddrSelPolicyPrecedence OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The precedence value associated with the address in the policy table. This value is applicable for destination addresses.Higher the value, higher the precedence." DEFVAL { 30 } ::= { snMspsIp6AddrSelPolicyEntry 5 } snMspsIp6AddrSelPolicyLabel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The label value associated with the address in the policy table." DEFVAL { 2 } ::= { snMspsIp6AddrSelPolicyEntry 6} snMspsIp6AddrSelPolicyAddrType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2), multicast(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object is used to configure an address as unicast/anycast/multicast, provided the IPv6 address meets the validation criteria for the address type." ::= { snMspsIp6AddrSelPolicyEntry 7 } snMspsIp6AddrSelPolicyIsPublicAddr OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB object indicates whether the address configured in the policy table is a private or public address." ::= { snMspsIp6AddrSelPolicyEntry 8 } snMspsIp6AddrSelPolicyIsSelfAddr OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object indicates whether the given address is configured on the associated interface and represents a self-address. The associated MIB object snMspsIp6AddrSelPolicyIfIndex takes value true if the associated IPv6 address is a self-node address.." ::= { snMspsIp6AddrSelPolicyEntry 9 } snMspsIp6AddrSelPolicyReachabilityStatus OBJECT-TYPE SYNTAX INTEGER { reachable (1), unreachable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable " ::= { snMspsIp6AddrSelPolicyEntry 10 } snMspsIp6AddrSelPolicyConfigStatus OBJECT-TYPE SYNTAX INTEGER { automatic (1), management (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object indicates whether the associated entry in the Policy table is created automatically or via the administrator." ::= { snMspsIp6AddrSelPolicyEntry 11 } snMspsIp6AddrSelPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative Status of the policy table. This object is used to create or delete the entry in the policy table. The following values are not supported for this MIB object - CREATE_AND_GO." ::= { snMspsIp6AddrSelPolicyEntry 12 } -- snMspsIp6AddrSelPolicyTable END -- Support for Scope Zone Interface Map Table - START --snMspsIp6IfScopeZoneMapTable BEGIN snMspsIp6IfScopeZoneMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6IfScopeZoneMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A zone index identifies an instance of a specific scope uniquely within the system.The zone index is used to associate unambiguously an IPv6 address to a specific zone. Following are the changes that has been done in snMspsIp6IfScopeZoneMapTable 1) The Zone-Index which is of type InetZoneIndex in stdipvx.mib is changed to DisplayString for user convenience.As the user is aware of the zones by the scope-zone name rather than the index (i.e Linklocal1 or sitelocal1,scope61,scope71) it has been changed to DisplayString. But the index associated with the scope-zone is displayed by ipv6ScopeZoneIndexTable. 2) The InetZoneIndex definition in INET-ADDRESS-MIB says that the zone-index will typically be the interface index for link-local address, but as per the Siemens design the Zone-Index is taken as a free flowing number starting from the value 1, hence the value of ipv6ScopeZoneIndexLinkLocal shall not be complaint with InetZoneIndex definition. 3) It is also mentioned that the zone-index value of 0 refers to the default zone. But the Siemens design implements the default scope-zone index for every scope by the snMspsIp6ScopeMemberEntry mib table. Hence the default-zone index of value 0 is also not supported 4) The scope-zone index that are not configured on an interface shall take a alpha numeric value of invalid in SnMspsIp6IfScopeZoneMapEntry and -1 for the index value in ipv6ScopeZoneIndexTable. " REFERENCE "Section 2.7 of RFC 4291" ::= { snMspsIp6Tables 15 } snMspsIp6IfScopeZoneMapEntry OBJECT-TYPE SYNTAX SnMspsIp6IfScopeZoneMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the list of scope identifiers on a given interface. Its a unique value assigned for each scope on an interface." INDEX { snMspsIp6ScopeZoneIndexIfIndex } ::= { snMspsIp6IfScopeZoneMapTable 1 } SnMspsIp6IfScopeZoneMapEntry ::= SEQUENCE { snMspsIp6ScopeZoneIndexIfIndex InterfaceIndex, snMspsIp6ScopeZoneIndexInterfaceLocal DisplayString, snMspsIp6ScopeZoneIndexLinkLocal DisplayString, snMspsIp6ScopeZoneIndex3 DisplayString, snMspsIp6ScopeZoneIndexAdminLocal DisplayString, snMspsIp6ScopeZoneIndexSiteLocal DisplayString, snMspsIp6ScopeZoneIndex6 DisplayString, snMspsIp6ScopeZoneIndex7 DisplayString, snMspsIp6ScopeZoneIndexOrganizationLocal DisplayString, snMspsIp6ScopeZoneIndex9 DisplayString, snMspsIp6ScopeZoneIndexA DisplayString, snMspsIp6ScopeZoneIndexB DisplayString, snMspsIp6ScopeZoneIndexC DisplayString, snMspsIp6ScopeZoneIndexD DisplayString, snMspsIp6ScopeZoneIndexE DisplayString, snMspsIp6IfScopeZoneCreationStatus INTEGER, snMspsIp6IfScopeZoneRowStatus RowStatus } snMspsIp6ScopeZoneIndexIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 1 } snMspsIp6ScopeZoneIndexInterfaceLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for the Interface local scope on this interface." DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 2 } snMspsIp6ScopeZoneIndexLinkLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for the link-local scope on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexLinkLocal" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 3 } snMspsIp6ScopeZoneIndex3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope 3 on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex3" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 4 } snMspsIp6ScopeZoneIndexAdminLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for the admin-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 5 } snMspsIp6ScopeZoneIndexSiteLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for the site-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal " DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 6 } snMspsIp6ScopeZoneIndex6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope 6 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6 " DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 7 } snMspsIp6ScopeZoneIndex7 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope 7 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 8 } snMspsIp6ScopeZoneIndexOrganizationLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for the organization-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexOrganizationLocal" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 9 } snMspsIp6ScopeZoneIndex9 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope 9 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex9" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 10 } snMspsIp6ScopeZoneIndexA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope A on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexA" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 11 } snMspsIp6ScopeZoneIndexB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope B on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexB" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 12 } snMspsIp6ScopeZoneIndexC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope C on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexC" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 13 } snMspsIp6ScopeZoneIndexD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope D on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexD" DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 14 } snMspsIp6ScopeZoneIndexE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The zone index for scope E on this interface." DEFVAL { "Invalid" } ::= { snMspsIp6IfScopeZoneMapEntry 15 } snMspsIp6IfScopeZoneCreationStatus OBJECT-TYPE SYNTAX INTEGER { notcreated(0), automatic(1), mgmt(2), overridden(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is created and the creation status of it is automatic.When a user creates a scope-zone the creation status is updated as manual.When an indication is receievd from higher layer protocol regarding the detection of interfaces on the same link, in that case whatever might be the configuration status (i.e automatic or manual) is changed to overridden. It means if the scope-zone on the standby links if its automatic or manually created both will be over-ridden and configured with the scope-zone of the active link" DEFVAL { notcreated } ::= { snMspsIp6IfScopeZoneMapEntry 16 } snMspsIp6IfScopeZoneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The rowstatus of the scope-zone index table, used in accordance to creation and deletion of scope-zones.To create a row in this table manager sets this object to createAndGo(4). The rowentry can be deleted automatically only when the creation status is set to auto,else the rowstatus is set to NotInService. " ::= { snMspsIp6IfScopeZoneMapEntry 17 } -- Support for Scope-Zone - END -- Support for Scope-Zone Table - START --snMspsIp6ScopeZoneTable BEGIN snMspsIp6ScopeZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6ScopeZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table is used to map each scope-zone index with the interface to which it has been associated. This table is indeed used while forwarding packets to find out what all interfaces belong to a particular scope-zone" ::= { snMspsIp6Tables 16 } snMspsIp6ScopeZoneEntry OBJECT-TYPE SYNTAX SnMspsIp6ScopeZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Scope-Zone Index Member Table.Each entry specifies the interface indices associated with a particular scope-zone index " INDEX { snMspsIp6ScopeZoneName } ::= { snMspsIp6ScopeZoneTable 1 } SnMspsIp6ScopeZoneEntry ::= SEQUENCE { snMspsIp6ScopeZoneName DisplayString, snMspsIp6ScopeZoneIndex InetZoneIndex, snMspsIp6ScopeZoneCreationStatus INTEGER, snMspsIp6ScopeZoneInterfaceList InterfaceList, snMspsIp6IsDefaultScopeZone INTEGER } snMspsIp6ScopeZoneName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION " Displays the scope zone name value(i.e linklocal1, interfacelocal2) for the scope-zone index" ::= { snMspsIp6ScopeZoneEntry 1 } snMspsIp6ScopeZoneIndex OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each scope on an interface. It is recommended that values are assigned contiguously starting from 1. " ::= { snMspsIp6ScopeZoneEntry 2 } snMspsIp6ScopeZoneCreationStatus OBJECT-TYPE SYNTAX INTEGER { automatic(1), mgmt(2), overridden(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is created and the creation status of it is automatic.When a user creates a scope-zone the creation status is updated as manual.When an indication is receievd from higher layer protocol regarding the detection of interfaces on the same link, in that case whatever might be the configuration status (i.e automatic or manual) is changed to overridden. It means if the scope-zone on the standby links is overridden by the scope-zone of the active link regardless Of whether the associated zone is created manually/automatically" ::= { snMspsIp6ScopeZoneEntry 3 } snMspsIp6ScopeZoneInterfaceList OBJECT-TYPE SYNTAX InterfaceList MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB object displays all the interfaces that are part of/members of this scope-zone index. These interfaces have the corresponding bit set in the octetlist. " ::= { snMspsIp6ScopeZoneEntry 4 } snMspsIp6IsDefaultScopeZone OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " yes- indicates that zone is default zone for the associated scope No - indicates that zone is not the default zone for the associated scope" DEFVAL { no } ::= { snMspsIp6ScopeZoneEntry 5 } --snMspsIp6ScopeZoneTable END -- snMspsIp6Tables END -- IPv6 ICMP statistics snMspsIp6IcmpInMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages which the entity received. Note that this counter includes all those counted by snMspsIp6IcmpInErrors." ::= { snMspsIp6Icmp 1 } snMspsIp6IcmpInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { snMspsIp6Icmp 2 } snMspsIp6IcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { snMspsIp6Icmp 3 } snMspsIp6IcmpInTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { snMspsIp6Icmp 4 } snMspsIp6IcmpInParmProbs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { snMspsIp6Icmp 5 } snMspsIp6IcmpInPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Packet Too Big messages received." ::= { snMspsIp6Icmp 6 } snMspsIp6IcmpInEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { snMspsIp6Icmp 7 } snMspsIp6IcmpInEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { snMspsIp6Icmp 8 } snMspsIp6IcmpInRouterSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Solicit messages received." ::= { snMspsIp6Icmp 9 } snMspsIp6IcmpInRouterAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Advertisement messages received." ::= { snMspsIp6Icmp 10 } snMspsIp6IcmpInNeighborSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Solicit messages received." ::= { snMspsIp6Icmp 11 } snMspsIp6IcmpInNeighborAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement messages received." ::= { snMspsIp6Icmp 12 } snMspsIp6IcmpInRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Redirect messages received." ::= { snMspsIp6Icmp 13 } snMspsIp6IcmpInAdminProhib OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ICMP destination unreachable/communication administratively prohibited messages received." ::= { snMspsIp6Icmp 14 } snMspsIp6IcmpOutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { snMspsIp6Icmp 15 } snMspsIp6IcmpOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { snMspsIp6Icmp 16 } snMspsIp6IcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { snMspsIp6Icmp 17 } snMspsIp6IcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { snMspsIp6Icmp 18 } snMspsIp6IcmpOutParmProbs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { snMspsIp6Icmp 19 } snMspsIp6IcmpOutPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Packet Too Big messages sent." ::= { snMspsIp6Icmp 20 } snMspsIp6IcmpOutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { snMspsIp6Icmp 21 } snMspsIp6IcmpOutEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { snMspsIp6Icmp 22 } snMspsIp6IcmpOutRouterSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Solicitation messages sent." ::= { snMspsIp6Icmp 23 } snMspsIp6IcmpOutRouterAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Router Advertisement messages received." ::= { snMspsIp6Icmp 24 } snMspsIp6IcmpOutNeighborSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Solicitation messages sent." ::= { snMspsIp6Icmp 25 } snMspsIp6IcmpOutNeighborAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement messages received." ::= { snMspsIp6Icmp 26 } snMspsIp6IcmpOutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { snMspsIp6Icmp 27 } snMspsIp6IcmpOutAdminProhib OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ICMP destination unreachable/ communication administratively prohibited messages sent." ::= { snMspsIp6Icmp 28 } snMspsIp6IcmpInBadCode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received ICMP messages having unrecognized type of message " ::= { snMspsIp6Icmp 29 } snMspsIp6IcmpInNARouterFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement received with Router Flag Set" ::= { snMspsIp6Icmp 30 } snMspsIp6IcmpInNASolicitedFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement received with Solicited Flag Set" ::= { snMspsIp6Icmp 31 } snMspsIp6IcmpInNAOverrideFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement received with Override Flag Set" ::= { snMspsIp6Icmp 32 } snMspsIp6IcmpOutNARouterFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement sent with Router Flag Set" ::= { snMspsIp6Icmp 33 } snMspsIp6IcmpOutNASolicitedFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement sent with Solicited Flag Set" ::= { snMspsIp6Icmp 34 } snMspsIp6IcmpOutNAOverrideFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Neighbor Advertisement sent with Override Flag Set" ::= { snMspsIp6Icmp 35 } -- The IPv6 UDP group snMspsIp6UdpScalars OBJECT IDENTIFIER ::= { snMspsIp6Udp 1 } --snMspsIp6UdpScalars BEGIN snMspsIp6UdpInDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams delivered to UDP users." ::= { snMspsIp6UdpScalars 1 } snMspsIp6UdpNoPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received UDP datagrams for which there was no application at the destination port." ::= { snMspsIp6UdpScalars 2 } snMspsIp6UdpInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { snMspsIp6UdpScalars 3 } snMspsIp6UdpOutDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams sent from this entity." ::= { snMspsIp6UdpScalars 4 } -- snMspsIp6UdpScalars END -- IPv6 Routing Table -- The IPv6 routing table contains an entry for each -- valid IPv6 unicast routes that can be used for packet -- forwarding. There are no entries for Multicast and Link-Local -- addresses. -- This table contains static and dynamic routes as well as routes -- to directly connected networks which are derived from the -- configured address prefixes. Thus entries exist in this table -- even if RIPng protocol is not running. -- Entries created/deleted from SNMP, dynamically through RIPng -- protocol or derived from configured address prefixes. snMspsIp6RouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6RouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains dynamic routes that are learnt through dynamic routing protocol as well as local routes derived from configured address prefixes and statically configured routes." ::= { snMspsIp6Route 1 } snMspsIp6RouteEntry OBJECT-TYPE SYNTAX SnMspsIp6RouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IPv6 Routing Table. An entry can be created by means of the routing protocol, derived from configured address prefixes as well as statically configured. There can be a static route as well as dynamic routes with the same destination and prefix length." INDEX { snMspsIp6RouteDest, snMspsIp6RoutePfxLength, snMspsIp6RouteProtocol, snMspsIp6RouteNextHop } ::= { snMspsIp6RouteTable 1 } SnMspsIp6RouteEntry ::= SEQUENCE { snMspsIp6RouteDest OCTET STRING, snMspsIp6RoutePfxLength Integer32, snMspsIp6RouteProtocol INTEGER, snMspsIp6RouteNextHop OCTET STRING, snMspsIp6RouteIfIndex InterfaceIndex, snMspsIp6RouteMetric Unsigned32, snMspsIp6RouteType INTEGER, snMspsIp6RouteTag Unsigned32, snMspsIp6RouteAge Integer32, snMspsIp6RouteAdminStatus RowStatus, snMspsIp6RouteAddrType INTEGER } snMspsIp6RouteDest OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value." ::= { snMspsIp6RouteEntry 1 } snMspsIp6RoutePfxLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the prefix length of the destination address." ::= { snMspsIp6RouteEntry 2 } snMspsIp6RouteProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following local(2), -- non-protocol information, -- e.g., manually configured -- entries netmgmt(3), -- static route ndisc(4), -- e.g., Redirect -- the following are all -- dynamic routing protocols rip(5), -- RIPng ospf(6), -- Open Shortest Path First bgp(7), -- Border Gateway Protocol idrp(8), -- InterDomain Routing Protocol igrp(9) -- InterGateway Routing Protocol } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix." ::= { snMspsIp6RouteEntry 3 } snMspsIp6RouteNextHop OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Next hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { snMspsIp6RouteEntry 4 } snMspsIp6RouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index value which uniquely identifies the interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsIp6IfIndex." ::= { snMspsIp6RouteEntry 5 } snMspsIp6RouteMetric OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The routing metric associated with this route." DEFVAL { 1 } ::= { snMspsIp6RouteEntry 6 } snMspsIp6RouteType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- an route indicating that -- packets to destinations -- matching this route are discard(2), -- to be discarded -- route to directly local(3), -- connected (sub-)network -- route to a remote remote(4) -- destination } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of route. Note that 'local(3)' refers to a route for which the next hop is the final destination; 'remote(4)' refers to a route for which the next hop is not the final destination; 'discard(2)' refers to a route indicating that packets to destinations matching this route are to be discarded (sometimes called black-hole route). In this implementation discard(2) is not supported." ::= { snMspsIp6RouteEntry 7 } snMspsIp6RouteTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent routes are external to the routing domain. For routes learnt through dynamic routing protocol, this object derives its value from the packet. For routes which are statically configured, this object should be configured. The higher order 2 bytes refers to the tag value and the lower order 2 byter refers to the next-hop AS number. " ::= { snMspsIp6RouteEntry 8 } snMspsIp6RouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, this object has value 0." ::= { snMspsIp6RouteEntry 9 } snMspsIp6RouteAdminStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative Status of the route. This object is used to create or delete the route entry. The snMspsIp6RouteIfIndex needs to be set, before the route entry is made active. CreateAndGo is not supported." ::= { snMspsIp6RouteEntry 10 } snMspsIp6RouteAddrType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the destination address in the route entry is unicast or anycast." DEFVAL { 1 } ::= { snMspsIp6RouteEntry 11 } --ipv6RouteTable END -- snMspsIp6PrefTable BEGIN -- IPv6 Protocol Preference -- The IPv6 Protocol Preference table defines the preference value -- for each protocol and the best routes will be determined based -- on this preference value. Protocol with lower value is the -- preferred. snMspsIp6PrefTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsIp6PrefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Preference table contains information on the Preference Value for each supported protocol." ::= { snMspsIp6Route 2 } snMspsIp6PrefEntry OBJECT-TYPE SYNTAX SnMspsIp6PrefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing objects about a particular protocols preference value." INDEX { snMspsIp6Protocol } ::= { snMspsIp6PrefTable 1 } SnMspsIp6PrefEntry ::= SEQUENCE { snMspsIp6Protocol INTEGER, snMspsIp6Preference Unsigned32 } snMspsIp6Protocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), ndisc(4), rip(5), ospf(6), bgp(7), idrp(8), igrp(9) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the protocol whose preference value needs to be processed." ::= { snMspsIp6PrefEntry 1 } snMspsIp6Preference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference of the route learned by a particular protocol. This value is used while choosing the best path. Lesser the value, highest is the preference. " ::= { snMspsIp6PrefEntry 2 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- PortLaMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines how a Port Channel does channeling. lacp(1) - place the port into passive negotiation state, in which the port waits for its peer to initiate negotiation. manual(2) - force the port to enable channeling. disable(3) - channeling is disabled." SYNTAX INTEGER { lacp(1), manual(2), disable(3) } LacpKey ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The Actor or Partner Key value." SYNTAX Integer32 (0..65535) LacpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Actor and Partner State values from the LACPDU." SYNTAX BITS { lacpActivity(0), lacpTimeout(1), aggregation(2), synchronization(3), collecting(4), distributing(5), defaulted(6), expired(7) } -- ------------------------------------------------------------------ -- The La System Group -- ------------------------------------------------------------------ -- snMspsLa 1-3 reserverd snMspsLaStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Link Aggregation Module administrative status as enabled or disabled. The module can be enabled only when this object is set to 'enabled'." ::= { snMspsLa 4 } snMspsLaActorSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A 6-octet read-write MAC address value used as a unique identifier for the System." ::= { snMspsLa 5 } snMspsLaMaxPortChannels OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This Object specifies the maximum number of Port-channels Present in the system" ::= { snMspsLa 6 } -- snMspsLa 7-9 reserved -- ------------------------------------------------------------------ -- Port Channel Table -- ------------------------------------------------------------------ snMspsLaPortChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLaPortChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel" ::= { snMspsLa 10 } snMspsLaPortChannelEntry OBJECT-TYPE SYNTAX SnMspsLaPortChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one entry in this table for each created port-channel port" INDEX { snMspsLaPortChannelIfIndex } ::= { snMspsLaPortChannelTable 1 } SnMspsLaPortChannelEntry ::= SEQUENCE { snMspsLaPortChannelIfIndex InterfaceIndex, snMspsLaPortChannelGroup LacpKey, snMspsLaPortChannelAdminMacAddress MacAddress, snMspsLaPortChannelMacSelection INTEGER, snMspsLaPortChannelMode PortLaMode, snMspsLaPortChannelPortCount Integer32, snMspsLaPortChannelActivePortCount Integer32, snMspsLaPortChannelSelectionPolicy INTEGER, snMspsLaPortChannelDefaultPortIndex InterfaceIndexOrZero, snMspsLaPortChannelMaxPorts Integer32, snMspsLaPortChannelPortList PortList, snMspsLaPortChannelName DisplayString } snMspsLaPortChannelIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port-channel(Aggregator's interface index). " ::= { snMspsLaPortChannelEntry 1 } snMspsLaPortChannelGroup OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in this table. " ::= { snMspsLaPortChannelEntry 2 } snMspsLaPortChannelAdminMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for configuring MacAddress that is to be used by the port-channel when snMspsLaPortChannelMacSelection is force. WARNING:The value configured should not conflict with the MAC address of system ports that are not configured to select this port-channel." ::= { snMspsLaPortChannelEntry 3 } snMspsLaPortChannelMacSelection OBJECT-TYPE SYNTAX INTEGER { dynamic(1), force(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the MAC address selection method for for the port-channel. Dynamic - System will reserve certain MAC address for aggregators. These MAC address are derived from BaseMac. If this object is configured as dynamic, the system will allocate MAC address from this pool. Force - Port-channel MAC address configured through snMspsLaPortChannelAdminMacAddress is used. The value can be changed to Force only after configuring a valid MAC address in snMspsLaPortChannelAdminMacAddress." DEFVAL { 1 } ::= { snMspsLaPortChannelEntry 4 } snMspsLaPortChannelMode OBJECT-TYPE SYNTAX PortLaMode MAX-ACCESS read-only STATUS current DESCRIPTION "Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). disable(3) - channeling is disabled." ::= { snMspsLaPortChannelEntry 5 } snMspsLaPortChannelPortCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports actually configured to the port-channel" ::= { snMspsLaPortChannelEntry 6 } snMspsLaPortChannelActivePortCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link." ::= { snMspsLaPortChannelEntry 7 } snMspsLaPortChannelSelectionPolicy OBJECT-TYPE SYNTAX INTEGER { macSrc(1), macDst(2), macSrcDst(3), ipSrc(4), ipDst(5), ipSrcDst(6), vlanId(7), isid(8), macSrcVid(9), macDstVid(10), macSrcDstVid(11), mplsVcLabel(12), mplsTunnelLabel(13), mplsVcTunnelLabel(14) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link selection policy to be used by the port-channel. Selection policy isid implies selection based on Service-instance and is applicable only in Provider BackBone bridge." DEFVAL {macSrcDst} ::= {snMspsLaPortChannelEntry 8} snMspsLaPortChannelDefaultPortIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set to 0, it will remove the current default port from the aggregator. To change the default port of an aggregator, first reset the object to 0 and then set the new ifIndex as default port." DEFVAL { 0 } ::= { snMspsLaPortChannelEntry 9 } snMspsLaPortChannelMaxPorts OBJECT-TYPE SYNTAX Integer32 (2..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximun number of ports that can attach to a port-channel." DEFVAL { 8 } ::= { snMspsLaPortChannelEntry 10 } snMspsLaPortChannelPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation" ::= { snMspsLaPortChannelEntry 11 } snMspsLaPortChannelName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the aggregation." ::= { snMspsLaPortChannelEntry 12 } ----------------------------------------------------------- -- LA Port Table objects Extension Table -- ------------------------------------------------------------------ snMspsXLaPortChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsXLaPortChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This augment table contains additional objects for snMspsLaPortChannelTable." ::= { snMspsLa 11 } snMspsXLaPortChannelEntry OBJECT-TYPE SYNTAX SnMspsXLaPortChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains management information applicable to an interface." AUGMENTS { snMspsLaPortChannelEntry } ::= { snMspsXLaPortChannelTable 1 } SnMspsXLaPortChannelEntry ::= SEQUENCE { snMspsXLaPortChannelRowStatus RowStatus } snMspsXLaPortChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Row status of this entry which is used only in two scenarios. 1. CREATE_AND_WAIT 2. DESTROY. Where '1' will be used during port creation and '2' will be used during port deletion." ::= { snMspsXLaPortChannelEntry 1 } -- ------------------------------------------------------------- -- The Aggregation Port Group -- ------------------------------------------------------------- snMspsLaPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains objects to set the port lacp mode of dot3adAggPortTable." ::={snMspsLa 12 } snMspsLaPortEntry OBJECT-TYPE SYNTAX SnMspsLaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table is for each physical port that participates in Link Aggregation which can be either aggregatable or individual. This table is indexed by the PortIndex." INDEX {snMspsLaPortIndex } ::={snMspsLaPortTable 1 } SnMspsLaPortEntry ::= SEQUENCE { snMspsLaPortIndex InterfaceIndex, snMspsLaPortMode PortLaMode, snMspsLaPortBundleState INTEGER, snMspsLaPortActorResetAdminState LacpState, snMspsLaPortAggregateWaitTime TimeTicks, snMspsLaPortPartnerResetAdminState LacpState, snMspsLaPortActorAdminPort Integer32, snMspsLaPortRestoreMtu Integer32, snMspsLaPortSelectAggregator INTEGER, snMspsLagConfigPortLACPLMEnable INTEGER } snMspsLaPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port" ::={snMspsLaPortEntry 1 } snMspsLaPortMode OBJECT-TYPE SYNTAX PortLaMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable LACP , disable LACP or manually aggregate a port" ::={snMspsLaPortEntry 2 } snMspsLaPortBundleState OBJECT-TYPE SYNTAX INTEGER { upInBndl(0), standby(1), down(2), upIndividual(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) - The port is capable of joining in aggregation group, when any of the ports in aggregation group goes down. down(2) - The port is operationally down in lower layers. or the port is operational in lower layers but temporarily not able to participate in aggregation because of different partner information in the same group. upIndividual(3) - The port is operating individually and is not taking part in aggregation." ::={snMspsLaPortEntry 3} snMspsLaPortActorResetAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-write STATUS current DESCRIPTION "A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout),the third bit corresponds to bit 2 (Aggregation),the fourth bit corresponds to bit 3 (Synchronization),the fifth bit corresponds to bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted),and the eighth bit corresponds to bit 7 (Expired). This object allows the RESET of the values of Actor LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns the current Port State of the Actor" ::={snMspsLaPortEntry 4 } snMspsLaPortAggregateWaitTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "Duration of the port to attach to the PortChannel." DEFVAL { 2 } ::={snMspsLaPortEntry 5 } snMspsLaPortPartnerResetAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-write STATUS current DESCRIPTION "A string of 8 bits,corresponding to the administrative values of Partner_State.The first bit corresponds to bit 0 of Partner_State (LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation),the fourth bit corresponds to bit 3 (Synchronization),the fifth bit corresponds to bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted),and the eighth bit corresponds to bit 7 (Expired). This object allows the RESET of the values of Partner LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns zeros for the Partner administrative values" ::={snMspsLaPortEntry 6 } snMspsLaPortActorAdminPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port." ::={snMspsLaPortEntry 7 } snMspsLaPortRestoreMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Restore mtu stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This operation is allowed only during config-save-restore operation , during system initialization." ::={snMspsLaPortEntry 8 } snMspsLaPortSelectAggregator OBJECT-TYPE SYNTAX INTEGER { static(0), dynamic(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. static(0) - The port is involved only in static aggregation. i.e. the port can be a member of only the aggregation to which it is configured. dynamic(1) - The port participates in dynamic aggregation selection. i.e. the port will be a part of best aggregation selected based on System id and Admin key. This object is set to 'dynamic' once the port is configured as a default port of a port channel." ::={snMspsLaPortEntry 9} snMspsLagConfigPortLACPLMEnable OBJECT-TYPE SYNTAX INTEGER { off (1), lacp-lm-on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure LACP on Port: off(1) - off , lacp-lm-on(2) - lacp link monitoring on." ::= { snMspsLaPortEntry 10 } -- ------------------------------------------------------------- -- END OF Aggregation Port Group -- ------------------------------------------------------------- ----------------------------------------------------------- -- LA Port Table objects Extension Table -- ------------------------------------------------------------------ snMspsXLaPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsXLaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This augment table contains additional objects for snMspsLaPortTable." ::= { snMspsLa 13 } snMspsXLaPortEntry OBJECT-TYPE SYNTAX SnMspsXLaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains management information applicable to an interface." AUGMENTS { snMspsLaPortEntry } ::= { snMspsXLaPortTable 1 } SnMspsXLaPortEntry ::= SEQUENCE { snMspsXLaPortRowStatus RowStatus } snMspsXLaPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Row status of this entry which is used only in two scenarios. 1. CREATE_AND_WAIT 2. DESTROY. Where '1' will be used during port creation and '2' will be used during port deletion." ::= { snMspsXLaPortEntry 1 } ----------------------------------------------------------- -- END OF LA Port Table objects Extension Table -- ------------------------------------------------------------------ -- snMspsLa 14-20 reserved snMspsLagSystemLACPLMTimeOut OBJECT-TYPE SYNTAX INTEGER (75..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout in ms for the LACP-LM protocol." ::= { snMspsLa 21 } snMspsLagSystemLACPLMRetry OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Retries for the LACP-LM protocol." ::= { snMspsLa 22 } snMspsLagSystemFrameDistribution OBJECT-TYPE SYNTAX INTEGER { frame-distribution-src-mac(1), frame-distribution-dst-mac(2), frame-distribution-src-dst-mac(3), frame-distribution-src-ip(4), frame-distribution-dst-ip(5), frame-distribution-src-dst-ip(6), frame-distribution-src-dst-mac-hash(7), frame-distribution-src-dst-mac-xor(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the frame distribution mechanism of the device for link aggregation. frame-distribution-src-mac(1) frame distribution based on src MAC address frame-distribution-dst-mac(2) frame distribution based on des MAC address frame-distribution-src-dst-mac(3) frame distribution based on src and des MAC address frame-distribution-src-ip(4) frame distribution based on src IP address frame-distribution-dst-ip(5) frame distribution based on des IP address frame-distribution-src-dst-ip(6) frame distribution based on src and des IP address frame-distribution-src-dst-mac-hash(7) frame distribution based on src and dst MAC address hash frame-distribution-src-dst-mac-xor(8) frame distribution based on src and dst MAC address xor" ::= { snMspsLa 23 } snMspsDasScalars OBJECT IDENTIFIER ::= { snMspsDas 1 } snMspsDasObjects OBJECT IDENTIFIER ::= { snMspsDas 2 } -- -------------------------------------------------------------- -- DaS Scalars -- -------------------------------------------------------------- snMspsDasNoOfEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of (host, IP) bindings, across all VLANs, at a given time. This is nothing but the total number of entries in the IP binding database" ::= { snMspsDasScalars 1 } -- -------------------------------------------------------------- -- DaS Interface Control Table -- -------------------------------------------------------------- snMspsDasConfigInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDasConfigInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides objects to enable or disable DaS functionality on member ports of the tia-interface (or management vlan interface). When DaS is enabled, DCP multicast packets are transmitted on member ports and default DaS timer of 10 Seconds will be started. After timer expiry information received from remote systems are dropped by DaS module. Note: DCP (Discovery and Configuration Protocol) multicast packets are not transmitted on mirrored destination and port-channel interfaces. Example: Management vlan interface 1 has member ports (gi1/1, gi1/2 and gi1/3). These Ports are connected to different remote systems. case a) DaS enabled on Vlan 1: DCP multicast packet, with a vlan tag according to port configurations, will be transmitted out on each port (gi1/1, gi1/2 and gi1/3) and starts a default timer of 10 Seconds. Remote system information recevies on all these ports for a duration of 10 Seconds and after timer expiry, packets received on all these member ports will be dropped. case b) DaS enabled on port gi1/2: DCP multicast packet, with a vlan tag according to port configurations, will be transmitted out on port gi1/2 and starts a default timer of 10 Seconds. Note: Remote system's information will be recevied on all member ports of management vlan interface or tia-interface for a duration of 10 Seconds and after timer expiry, packets received on all these member ports will be dropped." ::= { snMspsDasObjects 1 } snMspsDasConfigInterfaceEntry OBJECT-TYPE SYNTAX SnMspsDasConfigInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an interface on which DaS status (enabled/disabled) can be set." INDEX { snMspsDasIfIndex } ::= {snMspsDasConfigInterfaceTable 1} SnMspsDasConfigInterfaceEntry ::= SEQUENCE { snMspsDasIfIndex InterfaceIndex, snMspsDasStatus INTEGER } snMspsDasIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index on which remote system infomation is received. This is an index of the table." ::= { snMspsDasConfigInterfaceEntry 1 } snMspsDasStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the object is set to enabled(1), remote system information packets are consumed on all member ports of management vlan interface or tia-interface for a default timeout of 10 Seconds only. When the object is set to disable(2), dcp (Discovery and Configuration Protocol) packets are dropped by the DaS module." DEFVAL { disabled } ::= { snMspsDasConfigInterfaceEntry 2 } -- -------------------------------------------------------------- -- DaS Remote System Table -- -------------------------------------------------------------- snMspsDasRemoteSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDasRemoteSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one or more rows per physical network connection known to this local system. The local system may wish to ensure that only one remote entry is present for each local port or it may choose to maintain multiple remote entries for the same local port." ::= { snMspsDasObjects 2 } snMspsDasRemoteSystemEntry OBJECT-TYPE SYNTAX SnMspsDasRemoteSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries contain information about a particular physical network connection. Entries may be created and deleted in this table by the local system." INDEX { snMspsDasIfIndex, snMspsDasHostMac } ::= { snMspsDasRemoteSystemTable 1 } SnMspsDasRemoteSystemEntry ::= SEQUENCE { snMspsDasHostMac MacAddress, snMspsDasIpAddrType InetAddressType, snMspsDasIpAddr InetAddress, snMspsDasIpAddrPfxLen InetAddressPrefixLength, snMspsDasNextHopAddrType InetAddressType, snMspsDasNextHopAddr InetAddress, snMspsDasTypeOfStation SnmpAdminString, snMspsDasNameOfStation SnmpAdminString, snMspsDasSignalTimeOut Integer32, snMspsDasDhcpOrIp INTEGER, snMspsDasIpStatus INTEGER, snMspsDasNameStatus INTEGER, snMspsDasRemoteSystemStatus RowStatus } snMspsDasHostMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac address of the remote system. This is an index of the table." ::= { snMspsDasRemoteSystemEntry 2 } snMspsDasIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type (IPv4/IPv6) to discover or configure from remote system." ::= { snMspsDasRemoteSystemEntry 3 } snMspsDasIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address to discover or configure from remote system." ::= { snMspsDasRemoteSystemEntry 4 } snMspsDasIpAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "Discovers the subnetmask of the remote IP address of remote system. This object also can configure the subnetmask of remote system." ::= { snMspsDasRemoteSystemEntry 5 } snMspsDasNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type (IPv4/IPv6) of IP discovered or configured from remote system." ::= { snMspsDasRemoteSystemEntry 6 } snMspsDasNextHopAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Discovers the Gateway IP address of remote system. This object also can configure the Gateway IP address of remote system." ::= { snMspsDasRemoteSystemEntry 7 } snMspsDasTypeOfStation OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the type of station description of given port associated with the remote system. The length of the string is restricted to 25." ::= { snMspsDasRemoteSystemEntry 8 } snMspsDasNameOfStation OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value used to identify discovered remote sytem name information. This object can configure remote system name. The string length is restricted to 128 including '\0' character." ::= { snMspsDasRemoteSystemEntry 9 } snMspsDasSignalTimeOut OBJECT-TYPE SYNTAX Integer32 (5..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The signal time is provided to make the remote system blink for the configured time interval. The time interval to be configured multiples of 5. As remote system device blink for approximate 2 to 3 Seconds." ::= { snMspsDasRemoteSystemEntry 10 } snMspsDasDhcpOrIp OBJECT-TYPE SYNTAX INTEGER { none (0), ip (1), dhcp (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the remote system IP information, whether IP is dynamically allocated by DHCP or configured manually. This option is fetched from the DCP packet." DEFVAL { none } ::= { snMspsDasRemoteSystemEntry 11 } snMspsDasIpStatus OBJECT-TYPE SYNTAX INTEGER { none (0), ipDiscovered (1), ipConfigured (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the information, whether IP is discovered from the remote system or configured locally." DEFVAL { none } ::= { snMspsDasRemoteSystemEntry 12 } snMspsDasNameStatus OBJECT-TYPE SYNTAX INTEGER { none (0), nameDiscovered (1), nameConfigured (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the information, whether Name is discovered from the remote system or configured locally." DEFVAL { none } ::= { snMspsDasRemoteSystemEntry 13 } snMspsDasRemoteSystemStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " The status of the row. NOT_READY, CREATE_AND_WAIT, CREATE_AND_GO and DESTROY are not allowed. Before changing the objects make the rowstatus as NOT_IN_SERVICE, fill the objects and then make rowstatus ACTIVE. " ::= { snMspsDasRemoteSystemEntry 14 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- snMspsEtherNetIPOperStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Mode of EtherNet/IP" ::= { snMspsEthernetIp 1 } snMspsEtherNetIPAdminStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Next Mode of EtherNet/IP after the next reboot takes place." ::= { snMspsEthernetIp 2 } snMspsEtherNetIPEncapsulationInactivityTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Number of seconds of inactivity before TCP connection is closed" DEFVAL { 120 } ::= { snMspsEthernetIp 6 } snMspsEtherNetIPHostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Host Name attribute contains the device's host name, which can be used for informational purposes." ::= { snMspsEthernetIp 9} -- ------------------------------------------------------------ -- Textual Conventions -- ------------------------------------------------------------ InnerVlanIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A value used to represent the Inner VLAN that might be carried in a packet. A value between 1 and 4094 inclusive, represents a valid vlan and is used only in cases where the switch understands and is capable of handling double tagged packets. A value 0 is used in cases where the switch understands and is capable of handling only single tagged packets." SYNTAX Unsigned32 (0..4094) -- Instance Based Global Configuration Table snMspsSnoopInstanceGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopInstanceGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains multicast forwarding mode configuration for each instance running in the snooping switch" ::= { snMspsSnooping 1 } snMspsSnoopInstanceGlobalEntry OBJECT-TYPE SYNTAX SnMspsSnoopInstanceGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains instance number and the multicast forwarding mode configuration for the particular instance" INDEX { snMspsSnoopInstanceGlobalInstId } ::= { snMspsSnoopInstanceGlobalTable 1 } SnMspsSnoopInstanceGlobalEntry ::= SEQUENCE { snMspsSnoopInstanceGlobalInstId Integer32, snMspsSnoopInstanceGlobalMcastFwdMode INTEGER, snMspsSnoopInstanceGlobalSystemControl INTEGER, snMspsSnoopInstanceGlobalLeaveConfigLevel INTEGER, snMspsSnoopInstanceGlobalEnhancedMode INTEGER, snMspsSnoopInstanceGlobalReportProcessConfigLevel INTEGER, snMspsSnoopInstanceGlobalSparseMode INTEGER } snMspsSnoopInstanceGlobalInstId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance ID pertaining to the global configuration entry." ::= { snMspsSnoopInstanceGlobalEntry 1 } snMspsSnoopInstanceGlobalMcastFwdMode OBJECT-TYPE SYNTAX INTEGER { ipbased(1), macbased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode to be used for building the forwarding table i.e, whether IP based or MAC address based. The hardware should support programming of S,G and *,G entries for IGS/MLDS to operate in 'ipbased' mode. If the hardware supports only MAC based multicast tables then 'macbased' mode should be chosen." DEFVAL { 2 } ::= { snMspsSnoopInstanceGlobalEntry 2 } snMspsSnoopInstanceGlobalSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Snooping module is shutdown or started through this object. When set to 'start', resources required by the device SNOOP module is allocated and the module starts running. When set to 'shutdown', all the resources are released back to the system and the module stops running." DEFVAL { 1 } ::= { snMspsSnoopInstanceGlobalEntry 3 } snMspsSnoopInstanceGlobalLeaveConfigLevel OBJECT-TYPE SYNTAX INTEGER { vlanbased(1), portbased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A global configuration to specify if the leave processing mechanism needs to be configured at the vlan level or at the port level. When this object is set to vlanbased, the mib object snMspsSnoopVlanFastLeave must be used to configure the leave mechanism. When this object is set to portbased, the mib object snMspsSnoopPortLeaveMode must be used to configure the leave mechanism." DEFVAL { 1 } ::= { snMspsSnoopInstanceGlobalEntry 4 } snMspsSnoopInstanceGlobalEnhancedMode OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or disable the snooping module functioning in the enhanced mode. By default, the snooping module operates in the normal or default mode. In the default mode, the module multicasts from an Outer VLAN (SVLAN) to a set of ports. The Inner VLAN (CVLAN) will typically have a value of zero. In this mode, an S-tagged multicast data or query packet from one port can result in multiple packets on separate egress ports, but only one packet on any one egress port with an S-tag or with no tag. Enabling this object causes the snooping module to operate in the enhanced mode. The module multicasts from an Outer VLAN (SVLAN) to a set of ports & Inner VLANs (CVLAN). In this mode, an S-tagged multicast data or query packet from one port can result in multiple copies of the packet on the same egress port, each with a different C-tag. The Inner VLAN (CVLAN) will typically have a valid value within the designated range. However under certain scenarios, the Inner VLAN may also have a value of zero. Disabling this object causes the snooping module to operate in the default mode." DEFVAL { disable } ::= { snMspsSnoopInstanceGlobalEntry 5} snMspsSnoopInstanceGlobalReportProcessConfigLevel OBJECT-TYPE SYNTAX INTEGER { nonrouterports(1), allports(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A global configuration to specify if the report processing mechanism needs to be configured for the non-router ports or at the all ports level. When this object is set to non-router ports, the incoming report messages are process only on the non-router ports. When this object is set to all-ports, the incoming report messages are processed in all ports which includes router ports also. By default report messages were not processed on the router ports(i.e) report process config level is non-router-ports." DEFVAL { 1 } ::= { snMspsSnoopInstanceGlobalEntry 6 } snMspsSnoopInstanceGlobalSparseMode OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or disable the snooping module functioning in the sparse mode. By default, the snooping module operates in the non-sparse mode. In the non-sparse mode, the module will be used to forward the unknown multicast traffic when IGS is enabled in the switch. In the sparse mode (i.e Sparse mode is enabled), the module will be used to drop the unknown multicast traffic when IGS is enabled in the switch. Disabling this object causes the snooping module to operate in the default mode." DEFVAL { disable } ::= { snMspsSnoopInstanceGlobalEntry 7 } snMspsSnoopInstanceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopInstanceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains global configuration of snooping for each instance running in switch" ::= { snMspsSnooping 2 } snMspsSnoopInstanceConfigEntry OBJECT-TYPE SYNTAX SnMspsSnoopInstanceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains instance number, address type and the list of global configuration for the particular instance and address type" INDEX { snMspsSnoopInstanceConfigInstId, snMspsSnoopInetAddressType } ::= { snMspsSnoopInstanceConfigTable 1 } SnMspsSnoopInstanceConfigEntry ::= SEQUENCE { snMspsSnoopInstanceConfigInstId Integer32, snMspsSnoopInetAddressType InetAddressType, snMspsSnoopStatus INTEGER, snMspsSnoopProxyReportingStatus INTEGER, snMspsSnoopRouterPortPurgeInterval Integer32, snMspsSnoopPortPurgeInterval Integer32, snMspsSnoopReportForwardInterval Integer32, snMspsSnoopRetryCount Integer32, snMspsSnoopGrpQueryInterval Integer32, snMspsSnoopReportFwdOnAllPorts INTEGER, snMspsSnoopTraceOption Integer32, snMspsSnoopOperStatus INTEGER, snMspsSnoopSendQueryOnTopoChange INTEGER, snMspsSnoopSendLeaveOnTopoChange INTEGER, snMspsSnoopFilterStatus INTEGER, snMspsSnoopMulticastVlanStatus INTEGER, snMspsSnoopProxyStatus INTEGER, snMspsSnoopQueryFwdOnAllPorts INTEGER, snMspsSnoopQuerierStatus INTEGER, snMspsSnoopGlobalSnoopStatus INTEGER } snMspsSnoopInstanceConfigInstId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance ID pertaining to the global configuration entry." ::= { snMspsSnoopInstanceConfigEntry 1 } snMspsSnoopInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping" ::= { snMspsSnoopInstanceConfigEntry 2 } snMspsSnoopStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the device IGS/MLDS module starts protocol operations. When set to 'disabled', the IGS/MLDS module stops performing protocol operations." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 3 } snMspsSnoopProxyReportingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables proxy-reporting in the system. When proxy-reporting is 'enabled' the switch generates reports and forwards them to the router based on the available host information. When proxy-reporting is 'disabled' the switch forwards all SSM (IGMPv3/MLDv2) and a single ASM (IGMPv2/MLDv1) report to the router. Proxy-reporting can be enabled only if Proxy is disabled. " DEFVAL { 1 } ::= { snMspsSnoopInstanceConfigEntry 4 } snMspsSnoopRouterPortPurgeInterval OBJECT-TYPE SYNTAX Integer32 (60..600) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInterval' seconds.When the timer expires, the learnt router port entry is purged. However if control messages are received from the router before the timer expiry, then the timer is restarted. This object is deprecated and corresponding functionality is met using the objects in snMspsSnoopRtrPortTable. If configured, this value overrides the value used in snMspsSnoopRtrPortTable." DEFVAL { 125 } ::= { snMspsSnoopInstanceConfigEntry 5 } snMspsSnoopPortPurgeInterval OBJECT-TYPE SYNTAX Integer32 (130..1225) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received, this timer runs for 'PortPurgeInterval' seconds. This timer will be restarted whenever a report message is received from a host on the specific port. If the timer expires, then , the learnt port entry will be purged from the multicast group. This object is deprecated and corresponding functionality is met using a read only object in snMspsSnoopVlanFilterTable. If configured, this value overrides the value used in snMspsSnoopVlanFilterTable." DEFVAL {260} ::= { snMspsSnoopInstanceConfigEntry 6 } snMspsSnoopReportForwardInterval OBJECT-TYPE SYNTAX Integer32 (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "This timer is used when both proxy and proxy-reporting is disabled. The switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group from being forwarded to the router. This is the interval (in seconds) within which report messages for the same multicast group will not be forwarded. The 'ReportForwardTimer' is per multicast group. This timer is started as soon as a report message for that group is forwarded out. Within this 'ReportForwardInterval' if another report for the same group arrives, that report will not be forwarded." DEFVAL { 5 } ::= { snMspsSnoopInstanceConfigEntry 7 } snMspsSnoopRetryCount OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "In proxy/proxy-reporting mode, when the switch receives leave message on a port, it sends group specific query to check if there are any other interested v2 receivers for the group. This attribute defines the maximum number of queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds 'snMspsSnoopRetryCount', then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 8 } snMspsSnoopGrpQueryInterval OBJECT-TYPE SYNTAX Integer32 (2..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receivers. The switch will send 'snMspsSnoopRetryCount' queries before removing the port from the group membership information in the forwarding database." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 9 } snMspsSnoopReportFwdOnAllPorts OBJECT-TYPE SYNTAX INTEGER { allports(1), rtrports(2), nonedgeports(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "In snooping mode, Snooping module will forward reports only on router ports by default. This object provides administrative control either to forward the reports on all the member ports of the VLAN or to forward the report on SpanningTree non edge ports. This configuration will not be valid in proxy or proxy-reporting mode" DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 10 } snMspsSnoopTraceOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable trace statements in snooping module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: 0 - Init and Shutdown traces 1 - Management traces 2 - Data Path traces 3 - Control Plane traces 4 - Packet Dump traces 5 - Traces related to all resources except buffers 6 - All Failure traces 7 - Buffer allocation/release traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the trace statement related to Init-Shutdown and management will be printed. The user has to enter the corresponding integer value for the bits set. For example if bits 0 and 1 are to be set ,then user has to give the value 3." ::= { snMspsSnoopInstanceConfigEntry 11 } snMspsSnoopOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) indicates the IGS/MLDS module is currently disabled in the system." ::= { snMspsSnoopInstanceConfigEntry 12 } snMspsSnoopSendQueryOnTopoChange OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the spanning tree mode is RSTP, IGMP/MLD general queries will be sent on all the non router ports present in the switch.If the spanning tree mode is MSTP, IGMP/MLD general queries will be sent on all the non router ports of the VLAN mapped for the MSTP instance.When this object is set to 'enabled' ,the switch will generate general query messages. This object cannot be enabled if snMspsSnoopSendLeaveOnTopoChange is enabled. " DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 13 } snMspsSnoopSendLeaveOnTopoChange OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Snooping Switch can be configured to issue an IGMP proxy query solicitation on network ports, i.e. an IGMP Group Leave with group address 0.0.0.0. This will indicate to the upstream router that it immediately needs to send Group Specific queries, which will result in populating the L2 multicast tables in the snooping switch in order to speed up network convergence. This object cannot be enabled if snMspsSnoopSendQueryOnTopoChange is enabled. This is not applicable for proxy-reporting and proxy." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 14 } snMspsSnoopFilterStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable the IGS filtering feature. Interface mapping configurations will not be affected by this object status. When this object is disabled, filters will not be applied in this instance but the profile mapping and registration limits can be configured." DEFVAL { disabled } ::= { snMspsSnoopInstanceConfigEntry 15 } snMspsSnoopMulticastVlanStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable the Multicast VLAN feature. When Multicast VLAN feature is enabled, each incoming untagged report or leave message will be classified to an M-VLAN, depending on whether any M-VLAN configuration exists for the particular Group and/or Source address, configured using the snMspsSnoopVlanMulticastProfileId object. When Multicast VLAN feature is disabled, the usual VLAN classification rules apply." DEFVAL { disabled } ::= { snMspsSnoopInstanceConfigEntry 16 } snMspsSnoopProxyStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables Proxy in the system. Proxy can be enabled only if Proxy-reporting is disabled. In proxy mode, the switch act as querier for all downstream interfaces, act as host for all upstream interfaces. In proxy mode, switch sends out general query on all downstream interfaces on every query interval and updates membership database based on the reports received. For upstream interfaces, when queried, proxy trasnmits current state consolidated report. For any change in membership databases, state change report is formed and transmitted on upstream interfaces." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 17 } snMspsSnoopQueryFwdOnAllPorts OBJECT-TYPE SYNTAX INTEGER { allports(1), nonrtrports(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In proxy and proxy reporting mode, Snooping module will send query messages only to the non-router ports by default. This object provides administrative control to forward the query messages on all the member ports of the VLAN." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 18 } snMspsSnoopQuerierStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the snooping VLAN interfaces. When set to 'enabled' the switch will generate general query messages on all the snooping vlan interfaces. The query messages will be suppressed if the switch receives the query message from any other router in the VLAN. Switch should be configured as a querier only when there are no queriers in the network. This configuration is valid only in proxy reporting mode." DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 19 } snMspsSnoopGlobalSnoopStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables IGMP/MLD snooping in the system. This mib object controls snMspsSnoopStatus and snMspsSnoopVlanSnoopStatus. This Mib object is optional configuration. When set to 'enabled', the device IGS/MLDS module starts protocol operations, enables snMspsSnoopStatus and enables snMspsSnoopVlanSnoopStatus on all the layer 2 vlans. When set to 'disabled', the IGS/MLDS module snooping status can be controlled through the MIB objects snMspsSnoopStatus and snMspsSnoopVlanSnoopStatus. " DEFVAL { 2 } ::= { snMspsSnoopInstanceConfigEntry 20 } -- VLAN based filter table snMspsSnoopVlanFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system." ::= { snMspsSnooping 3 } snMspsSnoopVlanFilterEntry OBJECT-TYPE SYNTAX SnMspsSnoopVlanFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains snooping status , version and fast leave configuration for a specific VLAN." INDEX { snMspsSnoopVlanFilterInstId, snMspsSnoopVlanFilterVlanId, snMspsSnoopVlanFilterInetAddressType } ::= { snMspsSnoopVlanFilterTable 1 } SnMspsSnoopVlanFilterEntry ::= SEQUENCE { snMspsSnoopVlanFilterInstId Integer32, snMspsSnoopVlanFilterVlanId Integer32, snMspsSnoopVlanFilterInetAddressType InetAddressType, snMspsSnoopVlanSnoopStatus INTEGER, snMspsSnoopVlanOperatingVersion INTEGER, snMspsSnoopVlanCfgOperVersion INTEGER, snMspsSnoopVlanFastLeave INTEGER, snMspsSnoopVlanQuerier INTEGER, snMspsSnoopVlanCfgQuerier INTEGER, snMspsSnoopVlanQueryInterval Integer32, snMspsSnoopVlanRtrPortList PortList, snMspsSnoopVlanRowStatus RowStatus, snMspsSnoopVlanStartupQueryCount Integer32, snMspsSnoopVlanStartupQueryInterval Integer32, snMspsSnoopVlanOtherQuerierPresentInterval Integer32 } snMspsSnoopVlanFilterInstId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance ID pertaining to VLAN filter table entry." ::= { snMspsSnoopVlanFilterEntry 1 } snMspsSnoopVlanFilterVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " VLAN ID for which snooping configuration is to be done." ::= { snMspsSnoopVlanFilterEntry 2 } snMspsSnoopVlanFilterInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates whether the row belongs to IGS/MLD snooping" ::= { snMspsSnoopVlanFilterEntry 3 } snMspsSnoopVlanSnoopStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables IGS/MLDS on that specific VLAN" DEFVAL { 1 } ::= { snMspsSnoopVlanFilterEntry 4 } snMspsSnoopVlanOperatingVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), v3(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). This object is deprecated. Its functionality is met by snMspsSnoopRtrPortOperVersion object." ::= { snMspsSnoopVlanFilterEntry 5 } snMspsSnoopVlanCfgOperVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), v3(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(2). The 'snMspsSnoopVlanCfgOperVersion' should be configured on the basis of the router version present in the VLAN. This configuration should be used only when one router port is existing in the VLAN. This object is deprecated and corresponding functionality is met using snMspsSnoopRtrPortCfgOperVersion object available in snMspsSnoopRtrPortTable. If configured, consolidated reports sent on upstream interfaces will use this version." DEFVAL { 3 } ::= { snMspsSnoopVlanFilterEntry 6 } snMspsSnoopVlanFastLeave OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to 'enabled', the switch does not send a group specific query and immediately removes the port from the forwarding table." DEFVAL { 2 } ::= { snMspsSnoopVlanFilterEntry 7 } snMspsSnoopVlanQuerier OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the switch is configured as a querier in the VLAN" DEFVAL { 2 } ::= { snMspsSnoopVlanFilterEntry 8 } snMspsSnoopVlanCfgQuerier OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the VLAN. When set to 'enabled' the switch will generate general query messages. The query messages will be suppressed if the switch receives the query message from any other router in the VLAN. Switch should be configured as a querier for a VLAN only when there are no queriers in the network. This configuration is valid only in proxy reporting mode." DEFVAL { 2 } ::= { snMspsSnoopVlanFilterEntry 9 } snMspsSnoopVlanQueryInterval OBJECT-TYPE SYNTAX Integer32 (60..600) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the interval (in seconds) for which the switch sends general queries in proxy and proxy-reporting mode. In proxy-reporting mode, General queries will be sent on all downstream interfaces with this interval only if the switch is the Querier. In proxy mode, switch will be querier for all downstream interfaces. General queries will be sent on all downstream interfaces with this interval." DEFVAL { 125 } ::= { snMspsSnoopVlanFilterEntry 10 } snMspsSnoopVlanRtrPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of ports which are configured statically as router ports. statically. This object may not be sufficient to represent the full set of interfaces in each switch instance in environments where the number of interfaces in the system is scaled to a large value." ::= { snMspsSnoopVlanFilterEntry 11 } snMspsSnoopVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a row in the VLAN filter table. Using this object, new entries can be created in the VLAN filter table and the existing entries can be removed from the VLAN filter table" ::= { snMspsSnoopVlanFilterEntry 12 } snMspsSnoopVlanStartupQueryCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. The default value is the Robustness." DEFVAL { 2 } ::= { snMspsSnoopVlanFilterEntry 13 } snMspsSnoopVlanStartupQueryInterval OBJECT-TYPE SYNTAX Integer32 (15..150) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between the general query messages sent by the switch during startup of querier election process. This value must be <= (Query Interval/4)" DEFVAL { 32 } ::= { snMspsSnoopVlanFilterEntry 14 } snMspsSnoopVlanOtherQuerierPresentInterval OBJECT-TYPE SYNTAX Integer32 (120..1235) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Other Querier Present Interval is the length of time that must pass before a multicast router decides that there is no longer another multicast router which should be the querier. This value must be >= ((Robustness Variable * Query Interval) + (Query Response Interval/2)). Maximum value for the object varies for IGS and MLDS. For IGS, the max value supported is 1215. For MLDS, the max value supported is 1235. The default value for the object is same for both IGS and MLDS." DEFVAL { 255 } ::= { snMspsSnoopVlanFilterEntry 15 } -- The Extention table for VLAN based FilterEntry snMspsSnoopVlanFilterXTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extention table of snMspsSnoopVlanFilterTable" ::= { snMspsSnooping 4 } snMspsSnoopVlanFilterXEntry OBJECT-TYPE SYNTAX SnMspsSnoopVlanFilterXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configurations for specific VLANs" AUGMENTS { snMspsSnoopVlanFilterEntry } ::= { snMspsSnoopVlanFilterXTable 1 } SnMspsSnoopVlanFilterXEntry ::= SEQUENCE { snMspsSnoopVlanBlkRtrPortList PortList, snMspsSnoopVlanFilterMaxLimitType INTEGER, snMspsSnoopVlanFilterMaxLimit Unsigned32, snMspsSnoopVlanFilter8021pPriority Integer32, snMspsSnoopVlanFilterDropReports INTEGER, snMspsSnoopVlanMulticastProfileId Unsigned32, snMspsSnoopVlanPortPurgeInterval Integer32, snMspsSnoopVlanMaxResponseTime Integer32, snMspsSnoopVlanRtrLocalPortList PortList, snMspsSnoopVlanBlkRtrLocalPortList PortList } snMspsSnoopVlanBlkRtrPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of ports which are configured statically as blocked router ports statically. This object may not be sufficient to represent full set of interfaces in each switch instance in environments where the number of interfaces in the system is scaled to a large value." ::= { snMspsSnoopVlanFilterXEntry 1 } snMspsSnoopVlanFilterMaxLimitType OBJECT-TYPE SYNTAX INTEGER { none(0), groups(1), channels(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of limit to be applied on this VLAN. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as 'groups' indicates that the limit is set for groups. The channel limit will be applied only for IGMPv3 Include & Allow reports whereas the group limit will be applied for all IGMP reports. By default, this object has a value of 0 ('none') and no limiting is done i.e. the value of snMspsSnoopVlanFilterMaxLimit is ignored when this object is set to 'none'." DEFVAL { none } ::= { snMspsSnoopVlanFilterXEntry 2 } snMspsSnoopVlanFilterMaxLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum number of unique entries (channel or group) that can be learned simultaneously on this VLAN. The snMspsSnoopVlanFilterMaxLimitType must be set before configuring this object. If snMspsSnoopVlanFilterMaxLimitType is 'channels', this limit applies to number of channels that can be joined on this VLAN. If snMspsSnoopVlanFilterMaxLimitType is 'groups', this limit applies to number of groups that can be joined on this VLAN. By default, this object will hold a value of zero and will not limit any IGMP packets as long as the value of snMspsSnoopVlanFilterMaxLimitType is set to 'none'. However, when snMspsSnoopVlanFilterMaxLimitType is set to 'groups' or 'channels', if this object has the value of zero, then no IGMP reports will be processed on this interface. The maximum value supported by this object is dependent on the maximum groups or channels registrations that the system can support." DEFVAL { 0 } ::= { snMspsSnoopVlanFilterXEntry 3 } snMspsSnoopVlanFilter8021pPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the priority with which the reports assigned to this VLAN should be processed by the hardware as well as by the upstream router. Priority 0 means lowest priority while priority 7 means highest priority. This value will be used to update the priority bits in the ethernet header." DEFVAL { 7 } ::= { snMspsSnoopVlanFilterXEntry 4 } snMspsSnoopVlanFilterDropReports OBJECT-TYPE SYNTAX INTEGER { none(0), igmpv1(1), igmpv2(2), all(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Some implementations might require that IGMPv1 should not be supported, as IGMPv1 does not have any group leaving mechanism. Some other implementations might require that both IGMPv1 and IGMPv2 reports should be dropped, as they do not support SSM. So in such cases, this object can be used. If set to 'igmpv1', incoming IGMPv1 Reports will be dropped. If set to 'igmpv2', both IGMPv1 reports and IGMPv2 reports will be dropped. In case there is no need to process any reports (for diagnostic purposes or so), this object can be set to 'all'." DEFVAL { 0 } ::= { snMspsSnoopVlanFilterXEntry 5 } snMspsSnoopVlanMulticastProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the multicast profile id configured for a particular VLAN and is used for multicast vlan classification. When any untagged report or leave message is received (i.e. packet with no tag in a Customer Bridge or packet with no S-tag in a Provider or 802.1ad Bridge), and if the Group & Source address in the received packet matches any rule in this profile, then the received packet is classified to be associated to the VLAN (that is, Multicast VLAN) to which this profile is mapped. By default, no profile is associated to any VLAN." DEFVAL { 0 } ::= { snMspsSnoopVlanFilterXEntry 6 } snMspsSnoopVlanPortPurgeInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received,this timer runs for 'PortPurgeInterval' seconds. This timer will be restarted whenever a report message is received from a host on the specific port. If the timer expires, then , the learnt port entry will be purged from the multicast group." ::= { snMspsSnoopVlanFilterXEntry 7 } snMspsSnoopVlanMaxResponseTime OBJECT-TYPE SYNTAX Integer32 (0..65025) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum response code advertised in queries send over this vlan.This object is used to configure max response code for both IGS and MLDS.Minimum value for the object is zero for both IGS and MLDS. Max value and defualt value for the object varries for IGS and MLDS. For IGS, the max value supported is 255. The default value is 100.Its unit is in tenths of a second. For MLDS, the max value supported is 65025. The default value is 10000. Its unit is in milliseconds." ::= { snMspsSnoopVlanFilterXEntry 8 } snMspsSnoopVlanRtrLocalPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of ports which are configured statically as router ports. Each bit in this object represent interfaces denoted by the object snMspsVcHlPortId associated to the instance identifier denoted by snMspsSnoopVlanFilterInstId. This object alone should be referred in environments where the number of interfaces in the system is scaled to a large value , as the object snMspsSnoopVlanRtrPortList may not be sufficient to represent the full set of interfaces in each switch instance." ::= { snMspsSnoopVlanFilterXEntry 9 } snMspsSnoopVlanBlkRtrLocalPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of ports which are configured statically as blocked router ports. Each bit in this object represent interfaces denoted by the object snMspsVcHlPortId associated to the instance identifier denoted by snMspsSnoopVlanFilterInstId. This object alone should be referred in environments where the number of interfaces in the system is scaled to a large value, as the object snMspsSnoopVlanBlkRtrPortList may not be sufficient to represent the full set of interfaces in each switch instance." ::= { snMspsSnoopVlanFilterXEntry 10 } -- ---------------------------- -- Snoop Port Config Table -- ---------------------------- snMspsSnoopPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the default Mode. This table MUST NOT be configured when the snooping module is operating in the enhanced mode." ::= { snMspsSnooping 5 } snMspsSnoopPortEntry OBJECT-TYPE SYNTAX SnMspsSnoopPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of paramter/attribute objects that can be configured on a port." INDEX { snMspsSnoopPortIndex, snMspsSnoopPortInetAddressType } ::= { snMspsSnoopPortTable 1 } SnMspsSnoopPortEntry ::= SEQUENCE { snMspsSnoopPortIndex InterfaceIndex, snMspsSnoopPortInetAddressType InetAddressType, snMspsSnoopPortLeaveMode INTEGER, snMspsSnoopPortRateLimit Unsigned32, snMspsSnoopPortMaxLimitType INTEGER, snMspsSnoopPortMaxLimit Unsigned32, snMspsSnoopPortProfileId Unsigned32, snMspsSnoopPortMemberCnt Unsigned32, snMspsSnoopPortMaxBandwidthLimit Unsigned32, snMspsSnoopPortDropReports INTEGER, snMspsSnoopPortRowStatus RowStatus } snMspsSnoopPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of the port." ::= { snMspsSnoopPortEntry 1 } snMspsSnoopPortInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping" ::= { snMspsSnoopPortEntry 2 } snMspsSnoopPortLeaveMode OBJECT-TYPE SYNTAX INTEGER { explicithosttrack (1), fastleave (2), normalleave (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave messages are processed using the explicit host tracking mechanism. When this object is set to 'fastLeave', the leave messages are processed by the fast leave mechanism. When this object is set to 'normalLeave', for every leave message received, a group or group specific query is sent on the interface. This object can be configured only when snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased. This object is applicable only for processing the igmp v2 leave messages. For igmpv3 reports, the explicit host tracking functionality is always performed for tracking the source registrations and it cannot be disabled (i.e.) configuration using this object has no effect." DEFVAL { normalleave } ::= { snMspsSnoopPortEntry 3 } snMspsSnoopPortRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsigned integer and will not rate limit any IGMP packets. The actual rate supported, however, will depend on what the system can support. If this object is configured as zero, then no IGMP packets will be processed on this interface." DEFVAL { 4294967295 } ::= { snMspsSnoopPortEntry 4 } snMspsSnoopPortMaxLimitType OBJECT-TYPE SYNTAX INTEGER { none(0), groups(1), channels(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as 'groups' indicates that the limit is set for groups. The channel limit will be applied only for IGMPv3 Include & Allow reports whereas the group limit will be applied for all IGMP reports. By default, this object has a value of 0 ('none') and no limiting is done i.e. the value of snMspsSnoopPortMaxLimit is ignored when this object is set to 'none'." DEFVAL { none } ::= { snMspsSnoopPortEntry 5 } snMspsSnoopPortMaxLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The snMspsSnoopPortMaxLimitType must be set before configuring this object. However the Max-limit is configurable even if the limit type is 'none', but the limit won't be in effect unless the limit type is set as 'channels' or 'groups'. If snMspsSnoopPortMaxLimitType is 'channels', this limit applies to number of channels that can be joined on this interface. If snMspsSnoopPortMaxLimitType is 'groups', this limit applies to number of groups that can be joined on this interface. By default, this object will hold a value of zero and will not limit any IGMP packets as long as the value of snMspsSnoopPortMaxLimitType is set to 'none'. However, when snMspsSnoopPortMaxLimitType is set to 'groups' or 'channels', if this object has the value of zero, then no IGMP reports will be processed on this interface. The maximum value supported by this object is dependent on the maximum groups or channels registrations that the system can support." DEFVAL { 0 } ::= { snMspsSnoopPortEntry 6 } snMspsSnoopPortProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received through this downstream interface. By default, no profiles are applied on the interface." DEFVAL { 0 } ::= { snMspsSnoopPortEntry 7 } snMspsSnoopPortMemberCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the total number of groups or channels active on the interface at the given time." ::= { snMspsSnoopPortEntry 8 } snMspsSnoopPortMaxBandwidthLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Maximum bandwidth allowed on this port for Multicast. The snMspsSnoopPortMaxLimitType must be set before configuring this object. If the snMspsSnoopPortMaxLimitType is 'channels', this limit applies to the bandwidth of channels going through the port. It means that both Source as well as Group will be considered for getting the configured bandwidth of multicast data. If the snMspsSnoopPortMaxLimitType is 'groups', only Group address will be considered for getting the configured bandwidth of multicast data. Whenever a join comes, the bandwidth corresponding to the joined channel or group, will be reserved on the port. No new joins will be accepted, if the reserved bandwidth gets greater that the configured MaxBandwidth." ::= { snMspsSnoopPortEntry 9 } snMspsSnoopPortDropReports OBJECT-TYPE SYNTAX INTEGER { allow(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides whether to process or drop the IGMP reports coming on this port." DEFVAL { 1 } ::= { snMspsSnoopPortEntry 10 } snMspsSnoopPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. " ::= { snMspsSnoopPortEntry 11 } -- ------------------------------------------------------------------ -- Snoop Enhanced Port Config Table -- ------------------------------------------------------------------ snMspsSnoopEnhPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopEnhPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the enhanced Mode. This table MUST NOT be configured when the snooping module is operating in the default mode." ::= { snMspsSnooping 6 } snMspsSnoopEnhPortEntry OBJECT-TYPE SYNTAX SnMspsSnoopEnhPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of paramter/attribute objects that can be configured on an interface." INDEX { snMspsSnoopEnhPortIndex, snMspsSnoopEnhPortInnerVlanId, snMspsSnoopEnhPortInetAddressType } ::= { snMspsSnoopEnhPortTable 1 } SnMspsSnoopEnhPortEntry ::= SEQUENCE { snMspsSnoopEnhPortIndex InterfaceIndex, snMspsSnoopEnhPortInnerVlanId InnerVlanIndex, snMspsSnoopEnhPortInetAddressType InetAddressType, snMspsSnoopEnhPortLeaveMode INTEGER, snMspsSnoopEnhPortRateLimit Unsigned32, snMspsSnoopEnhPortMaxLimitType INTEGER, snMspsSnoopEnhPortMaxLimit Unsigned32, snMspsSnoopEnhPortProfileId Unsigned32, snMspsSnoopEnhPortMemberCnt Unsigned32, snMspsSnoopEnhPortMaxBandwidthLimit Unsigned32, snMspsSnoopEnhPortDropReports INTEGER, snMspsSnoopEnhPortRowStatus RowStatus } snMspsSnoopEnhPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of the port." ::= { snMspsSnoopEnhPortEntry 1 } snMspsSnoopEnhPortInnerVlanId OBJECT-TYPE SYNTAX InnerVlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Inner VLAN Identifier." ::= { snMspsSnoopEnhPortEntry 2 } snMspsSnoopEnhPortInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping" ::= { snMspsSnoopEnhPortEntry 3 } snMspsSnoopEnhPortLeaveMode OBJECT-TYPE SYNTAX INTEGER { explicithosttrack (1), fastleave (2), normalleave (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave messages are processed using the explicit host tracking mechanism. When this object is set to 'fastLeave', the leave messages are processed by the fast leave mechanism. When this object is set to 'normalLeave', for every leave message received, a group or group specific query is sent on the interface. This object can be configured only when snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased. This object is applicable only for processing the igmp v2 leave messages. For igmpv3 reports, the explicit host tracking functionality is always performed for tracking the source registrations and it cannot be disabled. For the v3 INCLUDE NONE reports the leave handling behavior is similar to the v2 leave messages for the leave modes 'explicitHostTrack' and 'fastLeave'. For the leave mode 'normalLeave' query message is not sent on the interface and only the host registered for the multicast group is removed" DEFVAL { normalleave } ::= { snMspsSnoopEnhPortEntry 4 } snMspsSnoopEnhPortRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsigned integer and will not rate limit any IGMP packets. The actual rate supported, however, will depend on what the system can support. If this object is configured as zero, then no IGMP packets will be processed on this interface." DEFVAL { 4294967295 } ::= { snMspsSnoopEnhPortEntry 5 } snMspsSnoopEnhPortMaxLimitType OBJECT-TYPE SYNTAX INTEGER { none(0), groups(1), channels(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as 'groups' indicates that the limit is set for groups. The channel limit will be applied only for IGMPv3 Include & Allow reports whereas the group limit will be applied for all IGMP reports. By default, this object has a value of 0 ('none') and no limiting is done i.e. the value of snMspsSnoopEnhPortMaxLimit is ignored when this object is set to 'none'." DEFVAL { none } ::= { snMspsSnoopEnhPortEntry 6 } snMspsSnoopEnhPortMaxLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The snMspsSnoopEnhPortMaxLimitType must be set before configuring this object. However the Max-limit is configurable even if the limit type is 'none', but the limit won't be in effect unless the limit type is set as 'channels' or 'groups'. If snMspsSnoopEnhPortMaxLimitType is 'channels', this limit applies to number of channels that can be joined on this interface. If snMspsSnoopEnhPortMaxLimitType is 'groups', this limit applies to number of groups that can be joined on this interface. By default, this object will hold a value of zero and will not limit any IGMP packets as long as the value of snMspsSnoopEnhPortMaxLimitType is set to 'none'. However, when snMspsSnoopEnhPortMaxLimitType is set to 'groups' or 'channels', if this object has the value of zero, then no IGMP reports will be processed on this interface. The maximum value supported by this object is dependent on the maximum groups or channels registrations that the system can support." DEFVAL { 0 } ::= { snMspsSnoopEnhPortEntry 7 } snMspsSnoopEnhPortProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received through this downstream interface. By default, no profiles are applied on the interface." DEFVAL { 0 } ::= { snMspsSnoopEnhPortEntry 8 } snMspsSnoopEnhPortMemberCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the total number of groups or channels active on the interface at the given time." ::= { snMspsSnoopEnhPortEntry 9 } snMspsSnoopEnhPortMaxBandwidthLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Maximum bandwidth allowed on this port for Multicast. The snMspsSnoopEnhPortMaxLimitType must be set before configuring this object. If the snMspsSnoopEnhPortMaxLimitType is 'channels', this limit applies to the bandwidth of channels going through the port. It means that both Source as well as Group will be considered for getting the configured bandwidth of multicast data. If the snMspsSnoopEnhPortMaxLimitType is 'groups', only Group address will be considered for getting the configured bandwidth of multicast data. Whenever a join comes, the bandwidth corresponding to the joined channel or group, will be reserved on the port. No new joins will be accepted, if the reserved bandwidth gets greater that the configured MaxBandwidth." ::= { snMspsSnoopEnhPortEntry 10 } snMspsSnoopEnhPortDropReports OBJECT-TYPE SYNTAX INTEGER { allow(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides whether to process or drop the IGMP reports coming on this port." DEFVAL { 1 } ::= { snMspsSnoopEnhPortEntry 11 } snMspsSnoopEnhPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. " ::= { snMspsSnoopEnhPortEntry 12 } -- ------------------------------------------------------------------ -- Snoop Proxy Upstream Router Port Table -- ------------------------------------------------------------------ snMspsSnoopRtrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopRtrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains upstream Router Port-related configurable information. Router port entry in this table will be created when the router port is either learnt dynamically or when the router port is statically configured through 'snMspsSnoopVlanRtrPortList'.Only static router ports will be restored during save restore." ::= { snMspsSnooping 7 } snMspsSnoopRtrPortEntry OBJECT-TYPE SYNTAX SnMspsSnoopRtrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the upstream router port operating and configured version of IGMP." INDEX { snMspsSnoopRtrPortIndex, snMspsSnoopRtrPortVlanId, snMspsSnoopRtrPortInetAddressType } ::= { snMspsSnoopRtrPortTable 1 } SnMspsSnoopRtrPortEntry ::= SEQUENCE { snMspsSnoopRtrPortIndex InterfaceIndex, snMspsSnoopRtrPortVlanId VlanIndex, snMspsSnoopRtrPortInetAddressType InetAddressType, snMspsSnoopRtrPortOperVersion INTEGER, snMspsSnoopRtrPortCfgOperVersion INTEGER, snMspsSnoopOlderQuerierInterval Integer32, snMspsSnoopV3QuerierInterval Integer32 } snMspsSnoopRtrPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of the port which is defined as an upstream router port." ::= { snMspsSnoopRtrPortEntry 1 } snMspsSnoopRtrPortVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN Identifier for the upstream router port" ::= { snMspsSnoopRtrPortEntry 2 } snMspsSnoopRtrPortInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping" ::= { snMspsSnoopRtrPortEntry 3 } snMspsSnoopRtrPortOperVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), v3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operating version of the IGMP Proxy on the upstream router port. Operating version is used by the Proxy to send consolidated reports on the router ports. Operating version of the router port will change based on the the version of query messages received on that port. Otherwise it will be set to the configured version of IGMP on the router port. The default operating mode is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2)." DEFVAL { 3 } ::= { snMspsSnoopRtrPortEntry 4 } snMspsSnoopRtrPortCfgOperVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), v3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the configured version of the IGMP Proxy on the upstream router port.The default operating mode is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). The 'snMspsSnoopRtrPortCfgOperVersion' should be configured on the basis of the router version present in the router port.The value configured for static router alone will be stored and restored." DEFVAL { 3 } ::= { snMspsSnoopRtrPortEntry 5 } snMspsSnoopOlderQuerierInterval OBJECT-TYPE SYNTAX Integer32 (60..600) MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval after which proxy assumes that there are no v1/v2 routers present on the upstream port.While OlderQuerierTimer is running, proxy will reply to all queries with consolidated v1/v2 (oper version) reports. On time-out, if v2/v3 queriers are not present and if the port is a dynamically learnt port, then it will be purged. Else, proxy will reply to all the queries with consolidated reports with the new oper version (v2/v3).The value configured for static router alone will be stored and restored." DEFVAL { 125 } ::= { snMspsSnoopRtrPortEntry 6 } snMspsSnoopV3QuerierInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval after which proxy assumes that there are no IGMPv3 routers present on the upstream port.While V3QuerierTimer is running, proxy will reply to all queries with consolidated v1/v2/v3 (oper version) reports. On time-out, if v1/v2 queriers are not present and if the port is a dynamically learnt upstream port, then the port will be purged. Else, proxy will reply to all the queries with consolidated reports with the new oper version (v1/v2). " ::= { snMspsSnoopRtrPortEntry 7 } -- IGMP Snooping Switch IP Address snMspsSnoopSwitchIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This will be used as source IP address for IGMP Snooping packets Default value for this object is 10.0.0.1. Configuring of IP Address 0.0.0.0 is not allowed. Configuration of SwitchIP Address will result in restarting of snooping instances" ::= { snMspsSnooping 8 } --------------------------------------------------- -- VLAN Based Static Multicast Forwarding Table --------------------------------------------------- snMspsSnoopVlanStaticMcastGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsSnoopVlanStaticMcastGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IP based multicast forwarding information." ::= { snMspsSnooping 9 } snMspsSnoopVlanStaticMcastGrpEntry OBJECT-TYPE SYNTAX SnMspsSnoopVlanStaticMcastGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be forwarded." INDEX { snMspsSnoopVlanStaticMcastGrpInstId, snMspsSnoopVlanStaticMcastGrpVlanId, snMspsSnoopVlanStaticMcastGrpAddressType, snMspsSnoopVlanStaticMcastGrpSourceAddress, snMspsSnoopVlanStaticMcastGrpGroupAddress } ::= { snMspsSnoopVlanStaticMcastGrpTable 1 } SnMspsSnoopVlanStaticMcastGrpEntry ::= SEQUENCE { snMspsSnoopVlanStaticMcastGrpInstId Integer32, snMspsSnoopVlanStaticMcastGrpVlanId Integer32, snMspsSnoopVlanStaticMcastGrpAddressType InetAddressType, snMspsSnoopVlanStaticMcastGrpSourceAddress InetAddress, snMspsSnoopVlanStaticMcastGrpGroupAddress InetAddress, snMspsSnoopVlanStaticMcastGrpPortList PortList, snMspsSnoopVlanStaticMcastGrpRowStatus RowStatus } snMspsSnoopVlanStaticMcastGrpInstId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1" ::= { snMspsSnoopVlanStaticMcastGrpEntry 1 } snMspsSnoopVlanStaticMcastGrpVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID pertaining to the Multicast forwarding entry" ::= { snMspsSnoopVlanStaticMcastGrpEntry 2 } snMspsSnoopVlanStaticMcastGrpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "InetAddressType pertaining to the Multicast forwarding entry" ::= { snMspsSnoopVlanStaticMcastGrpEntry 3 } snMspsSnoopVlanStaticMcastGrpSourceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unicast source address of the data source that sends multicast data for this group" ::= { snMspsSnoopVlanStaticMcastGrpEntry 4 } snMspsSnoopVlanStaticMcastGrpGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP/IPv6 multicast group address" ::= { snMspsSnoopVlanStaticMcastGrpEntry 5 } snMspsSnoopVlanStaticMcastGrpPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of ports onto which the multicast data packets destined for this source and group will be forwarded." ::= { snMspsSnoopVlanStaticMcastGrpEntry 6 } snMspsSnoopVlanStaticMcastGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { snMspsSnoopVlanStaticMcastGrpEntry 7 } -- snMspsRmon 1-2 reserved snMspsRmonEnableStatus OBJECT-TYPE SYNTAX INTEGER { rmonenabled(1), rmondisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the rmonenable flag for rmon" ::= { snMspsRmon 3 } snMspsRmonHwStatsSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the flag for whether HW supports Etherstatistics or not " ::= { snMspsRmon 4 } snMspsRmonHwHistorySupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWhistorysupp flag for rmon" ::= { snMspsRmon 5 } snMspsRmonHwAlarmSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWAlarmsupp flag for rmon" ::= { snMspsRmon 6 } -- snMspsRmon 7-9 reserved snMspsRmonHwEventSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWEvent flag for rmon" ::= { snMspsRmon 10 } snMspsRmon2AdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the admin status for rmon2." DEFVAL { disabled } ::= { snMspsRmon 11 } snMspsDsmonAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the admin status for dsmon" DEFVAL { 2 } ::= { snMspsRmon 12 } snMspsLoopDSystem OBJECT IDENTIFIER ::= { snMspsLoopDetection 1 } snMspsLoopDPort OBJECT IDENTIFIER ::= { snMspsLoopDetection 2 } -- -------------------------------------------------------------- -- LoopDSystem Sub-Group -- -------------------------------------------------------------- snMspsLoopDGlobalEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Global enable/disable for the loop detection protocol." DEFVAL { disabled } ::= { snMspsLoopDSystem 1 } snMspsLoopDVlanEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to indicate whether the loop detection frames are sent untagged only or on all VLANs the ports are members of." DEFVAL { disabled } ::= { snMspsLoopDSystem 2 } -- -------------------------------------------------------------- -- LoopDPortConfig Sub-Group -- -------------------------------------------------------------- snMspsLoopDPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsLoopDPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ports for which simple loop detection occurs on." ::= { snMspsLoopDPort 3 } snMspsLoopDPortEntry OBJECT-TYPE SYNTAX SnMspsLoopDPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Loop detection port entry." INDEX { snMspsLoopDPortIfIndex } ::= { snMspsLoopDPortTable 1 } SnMspsLoopDPortEntry ::= SEQUENCE { snMspsLoopDPortIfIndex INTEGER, snMspsLoopDPortEnable INTEGER, snMspsLoopDTransmissionInterval INTEGER, snMspsLoopDPortDetectThreshold INTEGER, snMspsLoopDPortReactionTimeout INTEGER, snMspsLoopDPortReactionLocal INTEGER, snMspsLoopDPortReactionRemote INTEGER, snMspsLoopDPortReset INTEGER, snMspsLoopDPortState INTEGER, snMspsLoopDPortIncomingPortIndex INTEGER, snMspsLoopDPortIncomingVlanId INTEGER } snMspsLoopDPortIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port on which loop detection occurs on." ::= { snMspsLoopDPortEntry 1 } snMspsLoopDPortEnable OBJECT-TYPE SYNTAX INTEGER { loopdPortBlocked(1), loopdPortForwarder(2), loopdPortSender(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value indicate whether the port entry is disabled (blocked) for loop detection, is enabled for forwarding only (sender) or is enabled for both sending and forwarding (forwarder)." DEFVAL { loopdPortForwarder } ::= { snMspsLoopDPortEntry 2 } snMspsLoopDTransmissionInterval OBJECT-TYPE SYNTAX INTEGER (500..5000) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval (in Milliseconds) for which loop detection occurs on a certain port or VLAN." DEFVAL { 1000 } ::= { snMspsLoopDPortEntry 3 } snMspsLoopDPortDetectThreshold OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Once the number of loop detection packets received on this port reaches this threshold action will be taken." DEFVAL { 2 } ::= { snMspsLoopDPortEntry 4 } snMspsLoopDPortReactionTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout (in seconds) the port action will be rolled back after a loop has been detected. If timeout is 0 the port action will not be rolled back." DEFVAL { 0 } ::= { snMspsLoopDPortEntry 5 } snMspsLoopDPortReactionLocal OBJECT-TYPE SYNTAX INTEGER { loopdNoAction(1), loopdPortDisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action that will take place after a local loop has been detected." DEFVAL { loopdPortDisable } ::= { snMspsLoopDPortEntry 6 } snMspsLoopDPortReactionRemote OBJECT-TYPE SYNTAX INTEGER { loopdNoAction(1), loopdPortDisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action that will take place after a remote loop has been detected." DEFVAL { loopdPortDisable } ::= { snMspsLoopDPortEntry 7 } snMspsLoopDPortReset OBJECT-TYPE SYNTAX INTEGER { loopdPortNoAction(1), loopdPortReset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If a port has been disabled due to a detected loop, the port can be reenabled" DEFVAL { loopdPortNoAction } ::= { snMspsLoopDPortEntry 8 } snMspsLoopDPortState OBJECT-TYPE SYNTAX INTEGER { loopdDisabled(1), loopdActive(2), loopdDetectedLocalLoop(3), loopdDetectedRemoteLoop(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual loop detection state of the port" DEFVAL { loopdDisabled } ::= { snMspsLoopDPortEntry 9 } snMspsLoopDPortIncomingPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Port ID of the port packet the last action causing packet was received." ::= { snMspsLoopDPortEntry 10 } snMspsLoopDPortIncomingVlanId OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID the last action causing packet was received." ::= { snMspsLoopDPortEntry 11 } -- -------------------------------------------------------------- -- END of LoopDPortConfig Sub-Group -- -------------------------------------------------------------- -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapLOOPDStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Device changed LOOPD state." ::= { snMspsTrapPrefix 2251 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- snMspsRip2GeneralGroup OBJECT IDENTIFIER ::= { snMspsRip 1 } snMspsRipRRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsRip 2 } snMspsRip2Security OBJECT-TYPE SYNTAX INTEGER { minimumSecurity(1), maximumSecurity(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A variable denotes the security level of RIP-2 in the system. The value `minimumSecurity` denotes that the RIP1 packets will be accepted even when authentication is in use. The value `maximumSecurity` denotes that RIP1 packets will be ignored when authentication is in use" DEFVAL { maximumSecurity } ::= { snMspsRip2GeneralGroup 1 } snMspsRip2Peers OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of peers that can be in conversation with the RIP2 system simultaneously" ::= { snMspsRip2GeneralGroup 2 } snMspsRip2TrustNBRListEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of neighbor list in the router. The value 'enabled' denotes that a list of router's IP address can be configured and RIP Packets from those router's will be processed by RIP and packets from other Routers will be dropped. 'Disabled' denotes that RIP Packet from all the router's will be processed." DEFVAL { disabled } ::= { snMspsRip2GeneralGroup 3 } snMspsRip2NumberOfDroppedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIP Packets dropped because of neighbor list check." ::= { snMspsRip2GeneralGroup 4 } snMspsRip2SpacingEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether spacing is enabled or not. If spacing is enabled, generation of periodic update packet will be split and send." DEFVAL { disabled } ::= { snMspsRip2GeneralGroup 5 } snMspsRip2AutoSummaryStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify the auto-summary status.If enabled, summary routes are sent in regular updates for both rip v1 and v2.If split hoizon is enabled, summary is sent only if atlest one subnet route is learned over an interface which is different from the interface over which the update is sent.If all the subnet routes are learned over the same interface over which updates are sent, then summary is not send. With poisson reverse enabled, summary is sent either with metric 16 or with proper metric according to the interfaces over which subnet routes were learnt. If summary is disabled, either individual subnet route are sent or subnet routes are sent based on the specfic aggregation configured over the interface." DEFVAL { enabled } ::= { snMspsRip2GeneralGroup 6 } -- MIB Objects for Triggered RIP snMspsRip2RetransTimeoutInt OBJECT-TYPE SYNTAX Integer32 (5..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout interval to be used to retransmit the Update request packet or an unacknowledged update response packet." DEFVAL { 5 } ::= { snMspsRip2GeneralGroup 7 } snMspsRip2MaxRetransmissions OBJECT-TYPE SYNTAX Integer32 (10..40) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of retransmissions of the update request and update response packets. If no response is received then the routes via the next hop router are marked unreachable." DEFVAL { 36 } ::= { snMspsRip2GeneralGroup 8 } snMspsRip2OverSubscriptionTimeout OBJECT-TYPE SYNTAX Integer32 (100..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Over subscription timeout value as mentioned in RFC 2091.When a Circuit DOWN message is received from the circuit manager, this timer will be started for the specified timeout value." DEFVAL { 180 } ::= { snMspsRip2GeneralGroup 9 } snMspsRip2Propagate OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is propagation of static route is enabled or not. If it is enabled then routing protocols (like RIP) are allowed to include static routes in the update messages." DEFVAL { disable } ::= { snMspsRip2GeneralGroup 10 } snMspsRipTrcFlag OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace." DEFVAL { 0 } ::= { snMspsRip2GeneralGroup 12 } snMspsRipAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status of RIP in the router. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inter-faces." DEFVAL { disabled } ::= { snMspsRip2GeneralGroup 13 } -- snMspsRip2GeneralGroup 14-20 reserved --SCALAR_END snMspsRip2GeneralGroup -- snMspsRip2NBRsTrustListTable snMspsRip2NBRTrustListTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip2NBRTrustListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of Router addresses from which you can receive RIP Packets" ::= { snMspsRip2GeneralGroup 21 } snMspsRip2NBRTrustListEntry OBJECT-TYPE SYNTAX SnMspsRip2NBRTrustListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of snMspsRip2NBRTrustListTable." INDEX { snMspsRip2TrustNBRIpAddr } ::= { snMspsRip2NBRTrustListTable 1 } SnMspsRip2NBRTrustListEntry ::= SEQUENCE { snMspsRip2TrustNBRIpAddr IpAddress, snMspsRip2TrustNBRRowStatus RowStatus } snMspsRip2TrustNBRIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ipaddress of the Router from which this router can accept RIP Packets" ::= { snMspsRip2NBRTrustListEntry 1 } snMspsRip2TrustNBRRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { snMspsRip2NBRTrustListEntry 2 } --snMspsRip2IfConfTable snMspsRip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of subnets which require separate configuration in RIP." ::= { snMspsRip2GeneralGroup 22 } snMspsRip2IfConfEntry OBJECT-TYPE SYNTAX SnMspsRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single Routing Domain in a single Subnet." INDEX { snMspsRip2IfConfAddress } ::= { snMspsRip2IfConfTable 1 } SnMspsRip2IfConfEntry ::= SEQUENCE { snMspsRip2IfConfAddress IpAddress, snMspsRip2IfAdminStat INTEGER, snMspsRip2IfConfOperState INTEGER, snMspsRip2IfConfUpdateTmr Integer32, snMspsRip2IfConfGarbgCollectTmr Integer32, snMspsRip2IfConfRouteAgeTmr Integer32, snMspsRip2IfSplitHorizonStatus INTEGER, snMspsRip2IfConfDefRtInstall INTEGER, snMspsRip2IfConfSpacingTmr Integer32 } snMspsRip2IfConfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order." ::= { snMspsRip2IfConfEntry 1 } snMspsRip2IfAdminStat OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), passive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status of RIP-2 in the router. The value 'enabled' denotes that the RIP2 Process is active throughout the system. 'disabled' disables RIP2 Process in the system. 'passive' denotes that the RIP2 Process runs as a passive one" ::= { snMspsRip2IfConfEntry 2 } snMspsRip2IfConfOperState OBJECT-TYPE SYNTAX INTEGER { operup (1), operdown (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface " DEFVAL { operdown } ::= { snMspsRip2IfConfEntry 3 } snMspsRip2IfConfUpdateTmr OBJECT-TYPE SYNTAX Integer32 (10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval Time Between Updates" DEFVAL { 30 } ::= { snMspsRip2IfConfEntry 4 } snMspsRip2IfConfGarbgCollectTmr OBJECT-TYPE SYNTAX Integer32(120..180) MAX-ACCESS read-write STATUS current DESCRIPTION " Interval before deleting an entry after not hearing it. Also the advertisements of this entry is set to INFINITY while sending to others " DEFVAL { 120 } ::= { snMspsRip2IfConfEntry 5 } snMspsRip2IfConfRouteAgeTmr OBJECT-TYPE SYNTAX Integer32 (30..500) MAX-ACCESS read-write STATUS current DESCRIPTION " Time after which the entry is put into garbage collect interval " DEFVAL { 180 } ::= { snMspsRip2IfConfEntry 6 } snMspsRip2IfSplitHorizonStatus OBJECT-TYPE SYNTAX INTEGER { splitHorizon(1), splitHorizonWithPoisRev(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "A flag to denote the split horizon operational status in the system. The value `splitHorizon` denotes that splitHorizon should be applied in the response packets that are going out" DEFVAL { splitHorizonWithPoisRev } ::= { snMspsRip2IfConfEntry 7 } snMspsRip2IfConfDefRtInstall OBJECT-TYPE SYNTAX INTEGER { installDefRt(1), doNotInstallDefRt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A flag that decides whether the default route received over this interface should be installed to rip database or not." DEFVAL { doNotInstallDefRt } ::= { snMspsRip2IfConfEntry 8 } snMspsRip2IfConfSpacingTmr OBJECT-TYPE SYNTAX Integer32(0..360) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of route entries are greater than 25 , regular updates (response packets are sent for every snMspsRip2IfConfUpdateTmr interval) are sent in multiple packets. Spacing Provides the interval between the packets.For value zero spacing will be disabled.Maximum value is 10% of the snMspsRip2IfConfUpdateTmr object maximum value." DEFVAL { 0 } ::= { snMspsRip2IfConfEntry 9 } -- MD5 Authentiacation table for RIP. snMspsRipMd5AuthTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRipMd5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MD5 Authentication table for RIP." ::= { snMspsRip2GeneralGroup 23 } snMspsRipMd5AuthEntry OBJECT-TYPE SYNTAX SnMspsRipMd5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in to the MD5 Authentiaction table. More than one entry can be configured for an interface." INDEX { snMspsRipMd5AuthAddress, snMspsRipMd5AuthKeyId } ::= { snMspsRipMd5AuthTable 1 } SnMspsRipMd5AuthEntry ::= SEQUENCE { snMspsRipMd5AuthAddress IpAddress, snMspsRipMd5AuthKeyId Integer32, snMspsRipMd5AuthKey OCTET STRING, snMspsRipMd5KeyStartTime Integer32, snMspsRipMd5KeyExpiryTime Integer32, snMspsRipMd5KeyRowStatus RowStatus } snMspsRipMd5AuthAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order. RIP should have been enabled for this IP address and the rip2IfConfAuthType should be MD5 for creating this entry." ::= { snMspsRipMd5AuthEntry 1 } snMspsRipMd5AuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The key ID for this key. This should be unique for the same snMspsRipMd5AuthAddress. This enables the configuration of more than one key for an interface." ::= { snMspsRipMd5AuthEntry 2 } snMspsRipMd5AuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object." ::= { snMspsRipMd5AuthEntry 3 } snMspsRipMd5KeyStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time the router will start accepting or generating the packets that have been created with this key. The start time of the key should be less than the expiry time of the previous key. During the overlap interval, the next key will be used in the generation of the authentication messages.The start time of the first key should be zero." ::= { snMspsRipMd5AuthEntry 4 } snMspsRipMd5KeyExpiryTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time the router will stop accepting the packets that have been created with this key. This time will be indicated (in the number of seconds) from the start time of the key. If the expiry time of a key is zero, it means that, the key should be used for the infinite amount of time. If this key is the last key then that key will be used for the infinite amount of time or until the new key is configured." ::= { snMspsRipMd5AuthEntry 5 } snMspsRipMd5KeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row by which a new entry can be created or deleted by setting this object to the appropriate value as mentioned in SMI-v2.If this entry is made active, then no other entry in the table will be allowed to modify. The entry can be in deleted from the table." ::= { snMspsRipMd5AuthEntry 6 } -- snMspsRip2NBRsUnicastListTable snMspsRip2NBRUnicastListTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip2NBRUnicastListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of Router addresses from which you can receive RIP Packets" ::= { snMspsRip2GeneralGroup 24 } snMspsRip2NBRUnicastListEntry OBJECT-TYPE SYNTAX SnMspsRip2NBRUnicastListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of snMspsRip2NBRUnicastListTable." INDEX { snMspsRip2NBRUnicastIpAddr } ::= { snMspsRip2NBRUnicastListTable 1 } SnMspsRip2NBRUnicastListEntry ::= SEQUENCE { snMspsRip2NBRUnicastIpAddr IpAddress, snMspsRip2NBRUnicastNBRRowStatus RowStatus } snMspsRip2NBRUnicastIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ipaddress of the neighbour Router to which unicast update has to be sent" ::= { snMspsRip2NBRUnicastListEntry 1 } snMspsRip2NBRUnicastNBRRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { snMspsRip2NBRUnicastListEntry 2 } --snMspsRip2LocalRoutingTable snMspsRip2LocalRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip2LocalRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain Local routing table entries " ::= { snMspsRip2GeneralGroup 25 } snMspsRip2LocalRouteEntry OBJECT-TYPE SYNTAX SnMspsRip2LocalRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of routes in local routing table" INDEX { snMspsRip2DestNet, snMspsRip2DestMask, snMspsRip2Tos, snMspsRip2NextHop } ::= { snMspsRip2LocalRouteTable 1 } SnMspsRip2LocalRouteEntry ::= SEQUENCE { snMspsRip2DestNet IpAddress, snMspsRip2DestMask IpAddress, snMspsRip2Tos Integer32, snMspsRip2NextHop IpAddress, snMspsRip2RtIfIndex Integer32, snMspsRip2RtType Integer32, snMspsRip2Proto Integer32, snMspsRip2ChgTime Integer32, snMspsRip2Metric Integer32, snMspsRip2RowStatus Integer32, snMspsRip2Gateway IpAddress } snMspsRip2DestNet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of the destination network" ::= { snMspsRip2LocalRouteEntry 1 } snMspsRip2DestMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Destination mask for the destination network" ::= { snMspsRip2LocalRouteEntry 2 } snMspsRip2Tos OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value for Rip is always zero" ::= { snMspsRip2LocalRouteEntry 3 } snMspsRip2NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The The nexthop address to which any datagrams destined to the destination,to be forwarded. (In some special cases)" ::= { snMspsRip2LocalRouteEntry 4 } snMspsRip2RtIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The interface through which the route is learnt" ::= { snMspsRip2LocalRouteEntry 5 } snMspsRip2RtType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value for Rip is always zero" ::= { snMspsRip2LocalRouteEntry 6 } snMspsRip2Proto OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol id == RIP (8 - 1)here" ::= { snMspsRip2LocalRouteEntry 7 } snMspsRip2ChgTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the route is installed" ::= { snMspsRip2LocalRouteEntry 8 } snMspsRip2Metric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The reachability cost for the destination" ::= { snMspsRip2LocalRouteEntry 9 } snMspsRip2RowStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Row status for perticular route entry" ::= { snMspsRip2LocalRouteEntry 10} snMspsRip2Gateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway address to which any datagrams destined to the destination, to be forwarded" ::= { snMspsRip2LocalRouteEntry 11} -- The CIDR group snMspsRipAggTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRipAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's supernet routes.RIP advertises only supernet routes on the speicified interface. And it suppresses all routes which are subset of the supernet." ::= { snMspsRip2GeneralGroup 26 } snMspsRipAggEntry OBJECT-TYPE SYNTAX SnMspsRipAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsRipAggTable representing supertnet route for the domain." INDEX { snMspsRipIfIndex, snMspsRipAggAddress, snMspsRipAggAddressMask } ::= { snMspsRipAggTable 1 } SnMspsRipAggEntry ::= SEQUENCE { snMspsRipIfIndex Integer32, snMspsRipAggAddress IpAddress, snMspsRipAggAddressMask IpAddress, snMspsRipAggStatus RowStatus } snMspsRipIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index over which the aggregation is configured." ::= { snMspsRipAggEntry 1 } snMspsRipAggAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aggregated address which when combined with the corresponding value of snMspsRipAggAddressMask identifies the supernet route for this domain." ::= { snMspsRipAggEntry 2 } snMspsRipAggAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aggregated address mask which when combined with the corresponding value of snMspsRipAggAddress identifies the supernet route for the domain." ::= { snMspsRipAggEntry 3 } snMspsRipAggStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row , by which new entries may be created or old entries deleted from this table" ::= { snMspsRipAggEntry 4 } -- MIB Definitions for the RIP Protocol to Support Route Redistribution: -- MIB Definition for RRD Support Starts here snMspsRipRRDGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object enables / disables RIP to participate in Route Redistribution. If set to enabled then RIP will start advertising the routes learned by other protocols. If set to disabled then RIP will stop redistribution of routes but will continue to send updates to the RTM." DEFVAL { disabled } ::= { snMspsRipRRDGeneralGroup 1 } snMspsRipRRDSrcProtoMaskEnable OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the protocols from which the routes have to be imported to RIP Bit 1, if set indicates the routes have to be imported from the local interface. Bit 2, if set indicates the routes have to be imported from static route. Bit 12, if set indicates the routes have to be imported from OSPF. Bit 13, if set indicates the routes have to be imported from BGP." DEFVAL { 0 } ::= { snMspsRipRRDGeneralGroup 2 } snMspsRipRRDSrcProtoMaskDisable OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the protocols from which the importing of routes should be stopped to RIP Bit 1, if set indicates the routes have to be imported from the local interface. Bit 2, if set indicates the routes have to be imported from static route. Bit 12, if set indicates the routes have to be imported from OSPF. Bit 13,if set indicates the routes have to be imported from BGP." DEFVAL { 0 } ::= { snMspsRipRRDGeneralGroup 3 } snMspsRipRRDRouteTagType OBJECT-TYPE SYNTAX INTEGER { manual (1), automatic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsRipRRDRouteTag MIB has to be set with the Tag value needed." DEFVAL { automatic } ::= { snMspsRipRRDGeneralGroup 4 } snMspsRipRRDRouteTag OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The Route Tag in case the user configures a Manual option for the tags ." DEFVAL { 0 } ::= { snMspsRipRRDGeneralGroup 5 } snMspsRipRRDRouteDefMetric OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The default metric to be used for the imported routes from RTM." DEFVAL { 3 } ::={ snMspsRipRRDGeneralGroup 6 } snMspsRipRRDRouteMapEnable OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value." ::={ snMspsRipRRDGeneralGroup 7 } -- FILTERING OBJECT DEFINITION BEGIN snMspsRipDistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsRip 3 } snMspsRipDistInOutRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRipDistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of filtering for route map." ::= { snMspsRipDistInOutRouteMap 1 } snMspsRipDistInOutRouteMapEntry OBJECT-TYPE SYNTAX SnMspsRipDistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the filtering configuration of single entry." INDEX { snMspsRipDistInOutRouteMapName, snMspsRipDistInOutRouteMapType} ::= { snMspsRipDistInOutRouteMapTable 1 } SnMspsRipDistInOutRouteMapEntry ::= SEQUENCE { snMspsRipDistInOutRouteMapName DisplayString, snMspsRipDistInOutRouteMapType Integer32, snMspsRipDistInOutRouteMapValue Integer32, snMspsRipDistInOutRouteMapRowStatus RowStatus } snMspsRipDistInOutRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map name." ::= { snMspsRipDistInOutRouteMapEntry 1 } snMspsRipDistInOutRouteMapType OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out" ::= { snMspsRipDistInOutRouteMapEntry 2 } snMspsRipDistInOutRouteMapValue OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value ( this will be unused for distribute list )" ::= { snMspsRipDistInOutRouteMapEntry 3 } snMspsRipDistInOutRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRipDistInOutRouteMapEntry 4 } -- FILTERING OBJECT DEFINITION END -- PREFERENCE OBJECT DEFINITION BEGIN snMspsRipPreferenceGroup OBJECT IDENTIFIER ::= { snMspsRip 4 } snMspsRipPreferenceValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference value for RIP routes. If the value is set as '0' it will inturn be mapped to default value" DEFVAL { 0 } ::= { snMspsRipPreferenceGroup 1 } -- PREFERENCE OBJECT DEFINITION END snMspsOspfGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf 1 } snMspsOspfRRDGroup OBJECT IDENTIFIER ::= { snMspsOspf 13 } snMspsOspfRRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspfRRDGroup 1} -- snMspsOspfGeneralGroup 1-4 reserved snMspsOspfRFC1583Compatibility OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the preference rules, when choosing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain those specified by RFC1583. When set to disabled the preference rules are those stated in RFC2178. Set to enabled by default." REFERENCE " OSPF Version 2, Appendix on Demand Routing" DEFVAL { enabled } ::= {snMspsOspfGeneralGroup 5} snMspsOspfDefaultPassiveInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not be passive." DEFVAL { false } ::= { snMspsOspfGeneralGroup 6 } -- snMspsOspf 2-3 reserved -- OSPF Interface Table -- The snmspsospfIfTable is an extension to the ospfIfTable -- and has statistical information associated with each interface. snMspsOspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters" ::= { snMspsOspf 4 } snMspsOspfIfEntry OBJECT-TYPE SYNTAX SnMspsOspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF." INDEX { snMspsOspfIfIpAddress, snMspsOspfAddressLessIf} ::= { snMspsOspfIfTable 1 } SnMspsOspfIfEntry ::= SEQUENCE { snMspsOspfIfIpAddress IpAddress, snMspsOspfAddressLessIf InterfaceIndex, snMspsOspfIfOperState INTEGER, snMspsOspfIfPassive TruthValue, snMspsOspfIfNbrCount Gauge32, snMspsOspfIfAdjCount Gauge32, snMspsOspfIfHelloRcvd Counter32, snMspsOspfIfHelloTxed Counter32, snMspsOspfIfHelloDisd Counter32, snMspsOspfIfDdpRcvd Counter32, snMspsOspfIfDdpTxed Counter32, snMspsOspfIfDdpDisd Counter32, snMspsOspfIfLrqRcvd Counter32, snMspsOspfIfLrqTxed Counter32, snMspsOspfIfLrqDisd Counter32, snMspsOspfIfLsuRcvd Counter32, snMspsOspfIfLsuTxed Counter32, snMspsOspfIfLsuDisd Counter32, snMspsOspfIfLakRcvd Counter32, snMspsOspfIfLakTxed Counter32, snMspsOspfIfLakDisd Counter32 } snMspsOspfIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of this OSPF interface." ::= { snMspsOspfIfEntry 1 } snMspsOspfAddressLessIf OBJECT-TYPE SYNTAX InterfaceIndex (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address." ::= { snMspsOspfIfEntry 2 } snMspsOspfIfOperState OBJECT-TYPE SYNTAX INTEGER { operup (1), operdown (2), loopback (3), unloop (4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { snMspsOspfIfEntry 3 } snMspsOspfIfPassive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to make the interface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal" DEFVAL { false } ::= { snMspsOspfIfEntry 4 } snMspsOspfIfNbrCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Neighbours through that Interface." ::= { snMspsOspfIfEntry 5 } snMspsOspfIfAdjCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Adjacencies through that Interface." ::= { snMspsOspfIfEntry 6 } snMspsOspfIfHelloRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets received through that Interface." ::= { snMspsOspfIfEntry 7 } snMspsOspfIfHelloTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets transmitted through that Interface." ::= { snMspsOspfIfEntry 8 } snMspsOspfIfHelloDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets discarded through that Interface." ::= { snMspsOspfIfEntry 9 } snMspsOspfIfDdpRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets received through that Interface." ::= { snMspsOspfIfEntry 10 } snMspsOspfIfDdpTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets transmitted through that Interface." ::= { snMspsOspfIfEntry 11 } snMspsOspfIfDdpDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets discarded through that Interface." ::= { snMspsOspfIfEntry 12 } snMspsOspfIfLrqRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets received through that Interface." ::= { snMspsOspfIfEntry 13 } snMspsOspfIfLrqTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets transmitted through that Interface." ::= { snMspsOspfIfEntry 14 } snMspsOspfIfLrqDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets discarded through that Interface." ::= { snMspsOspfIfEntry 15 } snMspsOspfIfLsuRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets received through that Interface." ::= { snMspsOspfIfEntry 16 } snMspsOspfIfLsuTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets transmitted through that Interface." ::= { snMspsOspfIfEntry 17 } snMspsOspfIfLsuDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets discarded through that Interface." ::= { snMspsOspfIfEntry 18 } snMspsOspfIfLakRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets received through that Interface." ::= { snMspsOspfIfEntry 19 } snMspsOspfIfLakTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets transmitted through that Interface." ::= { snMspsOspfIfEntry 20 } snMspsOspfIfLakDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets discarded on that Interface." ::= { snMspsOspfIfEntry 21 } -- OSPF Interface MD5 Authentication Table snMspsOspfIfMD5AuthTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfIfMD5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication." REFERENCE "OSPF Version 2, Appendix D.3 Cryptographic Authentication" ::= { snMspsOspf 5 } snMspsOspfIfMD5AuthEntry OBJECT-TYPE SYNTAX SnMspsOspfIfMD5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF." INDEX { snMspsOspfIfMD5AuthIpAddress, snMspsOspfIfMD5AuthAddressLessIf, snMspsOspfIfMD5AuthKeyId} ::= { snMspsOspfIfMD5AuthTable 1 } SnMspsOspfIfMD5AuthEntry ::= SEQUENCE { snMspsOspfIfMD5AuthIpAddress IpAddress, snMspsOspfIfMD5AuthAddressLessIf InterfaceIndex, snMspsOspfIfMD5AuthKeyId Integer32, snMspsOspfIfMD5AuthKey OCTET STRING, snMspsOspfIfMD5AuthKeyStartAccept Integer32, snMspsOspfIfMD5AuthKeyStartGenerate Integer32, snMspsOspfIfMD5AuthKeyStopGenerate Integer32, snMspsOspfIfMD5AuthKeyStopAccept Integer32, snMspsOspfIfMD5AuthKeyStatus INTEGER } snMspsOspfIfMD5AuthIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of this OSPF interface." ::= { snMspsOspfIfMD5AuthEntry 1 } snMspsOspfIfMD5AuthAddressLessIf OBJECT-TYPE SYNTAX InterfaceIndex (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address." ::= { snMspsOspfIfMD5AuthEntry 2 } snMspsOspfIfMD5AuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object identifies the secret key used to create the message digest appended to the OSPF packet." ::= { snMspsOspfIfMD5AuthEntry 3 } snMspsOspfIfMD5AuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the secret key which is used to create the message digest appended to the OSPF packet." ::= { snMspsOspfIfMD5AuthEntry 4 } snMspsOspfIfMD5AuthKeyStartAccept OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will start accepting packets that have been created with this key. The value shown will be configured time + system time at which the value is configured." DEFVAL { 0 } ::= { snMspsOspfIfMD5AuthEntry 5 } snMspsOspfIfMD5AuthKeyStartGenerate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will start using this key for packets generation.The value shown will be configured time + system time at which the value is configured. " DEFVAL { 0 } ::= { snMspsOspfIfMD5AuthEntry 6 } snMspsOspfIfMD5AuthKeyStopGenerate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured." DEFVAL { -1 } ::= { snMspsOspfIfMD5AuthEntry 7 } snMspsOspfIfMD5AuthKeyStopAccept OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured. " DEFVAL { -1 } ::= { snMspsOspfIfMD5AuthEntry 8 } snMspsOspfIfMD5AuthKeyStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Identifies the status of the key. NOTE:invalid (2) currently not supported" ::= { snMspsOspfIfMD5AuthEntry 9 } -- OSPF Virtual Interface MD5 Authentication Table snMspsOspfVirtIfMD5AuthTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfVirtIfMD5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication." REFERENCE "OSPF Version 2, Appendix D.3 Cryptographic Authentication" ::= { snMspsOspf 6 } snMspsOspfVirtIfMD5AuthEntry OBJECT-TYPE SYNTAX SnMspsOspfVirtIfMD5AuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF." INDEX {snMspsOspfVirtIfMD5AuthAreaId,snMspsOspfVirtIfMD5AuthNeighbor, snMspsOspfVirtIfMD5AuthKeyId} ::= { snMspsOspfVirtIfMD5AuthTable 1 } SnMspsOspfVirtIfMD5AuthEntry ::= SEQUENCE { snMspsOspfVirtIfMD5AuthAreaId AreaID, snMspsOspfVirtIfMD5AuthNeighbor RouterID, snMspsOspfVirtIfMD5AuthKeyId Integer32, snMspsOspfVirtIfMD5AuthKey OCTET STRING, snMspsOspfVirtIfMD5AuthKeyStartAccept Integer32, snMspsOspfVirtIfMD5AuthKeyStartGenerate Integer32, snMspsOspfVirtIfMD5AuthKeyStopGenerate Integer32, snMspsOspfVirtIfMD5AuthKeyStopAccept Integer32, snMspsOspfVirtIfMD5AuthKeyStatus INTEGER } snMspsOspfVirtIfMD5AuthAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0." ::= { snMspsOspfVirtIfMD5AuthEntry 1 } snMspsOspfVirtIfMD5AuthNeighbor OBJECT-TYPE SYNTAX RouterID MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Router ID of the Virtual Neighbor." ::= { snMspsOspfVirtIfMD5AuthEntry 2 } snMspsOspfVirtIfMD5AuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object identifies the secret key used to create the message digest appended to the OSPF packet." ::= { snMspsOspfVirtIfMD5AuthEntry 3 } snMspsOspfVirtIfMD5AuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the secret key which is used to create the message digest appended to the OSPF packet." ::= { snMspsOspfVirtIfMD5AuthEntry 4 } snMspsOspfVirtIfMD5AuthKeyStartAccept OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will start accepting packets that have been created with this key.The value shown will be configured time + system time at which the value is configured." DEFVAL { 0 } ::= { snMspsOspfVirtIfMD5AuthEntry 5 } snMspsOspfVirtIfMD5AuthKeyStartGenerate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will start using this key for packet generation.The value shown will be configured time + system time at which the value is configured." DEFVAL { 0 } ::= { snMspsOspfVirtIfMD5AuthEntry 6 } snMspsOspfVirtIfMD5AuthKeyStopGenerate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured." DEFVAL { -1 } ::= { snMspsOspfVirtIfMD5AuthEntry 7 } snMspsOspfVirtIfMD5AuthKeyStopAccept OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime. The value shown will be configured time + system time at which the value is configured." DEFVAL { -1 } ::= { snMspsOspfVirtIfMD5AuthEntry 8 } snMspsOspfVirtIfMD5AuthKeyStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Identifies the status of the key. NOTE: invalid (2) is currently not supported" ::= { snMspsOspfVirtIfMD5AuthEntry 9 } -- snMspsOspf 7-9 reserved -- The snMspsOspfAreaAggregateTable is an extension to the -- ospfAreaAggregateTable to support external Tag for address -- range configured. snMspsOspfAreaAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfAreaAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Supports configuration of External Tag for Type-7 Address ranges configured. " ::= { snMspsOspf 10 } snMspsOspfAreaAggregateEntry OBJECT-TYPE SYNTAX SnMspsOspfAreaAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Supports configuration of External Tag for Type-7 Address ranges configured. " INDEX { snMspsOspfAreaAggregateAreaID, snMspsOspfAreaAggregateLsdbType, snMspsOspfAreaAggregateNet, snMspsOspfAreaAggregateMask } ::= {snMspsOspfAreaAggregateTable 1 } SnMspsOspfAreaAggregateEntry ::= SEQUENCE { snMspsOspfAreaAggregateAreaID AreaID, snMspsOspfAreaAggregateLsdbType INTEGER, snMspsOspfAreaAggregateNet IpAddress, snMspsOspfAreaAggregateMask IpAddress, snMspsOspfAreaAggregateExternalTag Integer32 } snMspsOspfAreaAggregateAreaID OBJECT-TYPE SYNTAX AreaID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Area the Address Aggregate is to be found within." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { snMspsOspfAreaAggregateEntry 1 } snMspsOspfAreaAggregateLsdbType OBJECT-TYPE SYNTAX INTEGER { summaryLink (3), nssaExternalLink (7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { snMspsOspfAreaAggregateEntry 2 } snMspsOspfAreaAggregateNet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of the Net or Subnet indicated by the range." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { snMspsOspfAreaAggregateEntry 3 } snMspsOspfAreaAggregateMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { snMspsOspfAreaAggregateEntry 4 } snMspsOspfAreaAggregateExternalTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit field attached to each external route. This is not used by OSPF protocol itself. It may be used to communicate information between AS boundary routers. The precise nature of this information is outside the scope of OSPF. " ::= { snMspsOspfAreaAggregateEntry 5 } snMspsOspfRRDStatus OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object enables/disables OSPF to participate in Route Redistribution. If set to enabled, OSPF will start advertising the routes learned by other protocols. If set to disabled, OSPF will stop redistribution of routes. However, OSPF will continue updating the Common Routing Table using the queue interface." DEFVAL { disabled } ::= { snMspsOspfRRDGeneralGroup 1 } snMspsOspfRRDSrcProtoMaskEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The bit mask of source protocols from which routes are imported to OSPF. Bit 1, if set, indicates that local routes are redistributed into OSPF. (value = 2) Bit 2, if set, indicates that static routes are redistributed into OSPF. (value = 4) Bit 7, if set, indicates that routes from RIP are redistributed into OSPF. (value = 128) Bit 13, if set, indicates that routes from BGP are redistributed into OSPF. (value = 8192) Other bits are reserved for future use." DEFVAL { 0 } ::= { snMspsOspfRRDGeneralGroup 2 } snMspsOspfRRDRouteMapEnable OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value." ::={ snMspsOspfRRDGeneralGroup 3 } snMspsOspfRRDRouteConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfRRDRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM." ::= { snMspsOspfRRDGroup 3 } snMspsOspfRRDRouteConfigEntry OBJECT-TYPE SYNTAX SnMspsOspfRRDRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the configuration of single route entry." INDEX {snMspsOspfRRDRouteDest,snMspsOspfRRDRouteMask} ::= { snMspsOspfRRDRouteConfigTable 1 } SnMspsOspfRRDRouteConfigEntry ::= SEQUENCE { snMspsOspfRRDRouteDest IpAddress, snMspsOspfRRDRouteMask IpAddress, snMspsOspfRRDRouteMetric BigMetric, snMspsOspfRRDRouteMetricType INTEGER, snMspsOspfRRDRouteTagType INTEGER, snMspsOspfRRDRouteTag Unsigned32, snMspsOspfRRDRouteStatus RowStatus } snMspsOspfRRDRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip Address of the Destination route." ::= { snMspsOspfRRDRouteConfigEntry 1 } snMspsOspfRRDRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mask of the Destination route." ::= { snMspsOspfRRDRouteConfigEntry 2 } snMspsOspfRRDRouteMetric OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric value applied to the route before it is adv. into the OSPF Domain." DEFVAL { 10 } ::= { snMspsOspfRRDRouteConfigEntry 3 } snMspsOspfRRDRouteMetricType OBJECT-TYPE SYNTAX INTEGER { asexttype1 (1), asexttype2 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric Type applied to the route before it is adv. into the OSPF Domain" DEFVAL { asexttype2 } ::= { snMspsOspfRRDRouteConfigEntry 4 } snMspsOspfRRDRouteTagType OBJECT-TYPE SYNTAX INTEGER { manual (1), automatic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsOspfRRDRouteTag MIB has to be set with the Tag value needed." DEFVAL { manual } ::= { snMspsOspfRRDRouteConfigEntry 5 } snMspsOspfRRDRouteTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Route Tag in case the user configures a Manual option for the tags." DEFVAL { 0 } ::= { snMspsOspfRRDRouteConfigEntry 6 } snMspsOspfRRDRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The variable displays the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative." ::= { snMspsOspfRRDRouteConfigEntry 7 } -- snMspsOspf 14 reserved snMspsOspfLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Process's Link State Database." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { snMspsOspf 17 } snMspsOspfLsdbEntry OBJECT-TYPE SYNTAX SnMspsOspfLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Link State Advertisement." INDEX { snMspsOspfLsdbAreaId, snMspsOspfLsdbType, snMspsOspfLsdbLsid, snMspsOspfLsdbRouterId } ::= { snMspsOspfLsdbTable 1 } SnMspsOspfLsdbEntry ::= SEQUENCE { snMspsOspfLsdbAreaId AreaID, snMspsOspfLsdbType INTEGER, snMspsOspfLsdbLsid IpAddress, snMspsOspfLsdbRouterId RouterID, snMspsOspfLsdbSequence Integer32, snMspsOspfLsdbAge Integer32, snMspsOspfLsdbChecksum Integer32, snMspsOspfLsdbAdvertisement OCTET STRING } snMspsOspfLsdbAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received. In case of external Link, this object is not relevant." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { snMspsOspfLsdbEntry 1 } snMspsOspfLsdbType OBJECT-TYPE SYNTAX INTEGER { routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { snMspsOspfLsdbEntry 2 } snMspsOspfLsdbLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { snMspsOspfLsdbEntry 3 } snMspsOspfLsdbRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { snMspsOspfLsdbEntry 4 } -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. snMspsOspfLsdbSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { snMspsOspfLsdbEntry 5 } snMspsOspfLsdbAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state adver- tisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { snMspsOspfLsdbEntry 6 } snMspsOspfLsdbChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { snMspsOspfLsdbEntry 7 } snMspsOspfLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The entire Link State Advertisement, including its header." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { snMspsOspfLsdbEntry 8 } -- FILTERING OBJECT DEFINITION BEGIN snMspsOspfDistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsOspf 15 } snMspsOspfDistInOutRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfDistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of filtering for route map." ::= { snMspsOspfDistInOutRouteMap 1 } snMspsOspfDistInOutRouteMapEntry OBJECT-TYPE SYNTAX SnMspsOspfDistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the filtering configuration of single entry." INDEX {snMspsOspfDistInOutRouteMapName, snMspsOspfDistInOutRouteMapType} ::= { snMspsOspfDistInOutRouteMapTable 1 } SnMspsOspfDistInOutRouteMapEntry ::= SEQUENCE { snMspsOspfDistInOutRouteMapName DisplayString, snMspsOspfDistInOutRouteMapType Integer32, snMspsOspfDistInOutRouteMapValue Integer32, snMspsOspfDistInOutRouteMapRowStatus RowStatus } snMspsOspfDistInOutRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map name." ::= { snMspsOspfDistInOutRouteMapEntry 1 } snMspsOspfDistInOutRouteMapType OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out" ::= { snMspsOspfDistInOutRouteMapEntry 3 } snMspsOspfDistInOutRouteMapValue OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value ( this will be unused for distribute list )" ::= { snMspsOspfDistInOutRouteMapEntry 4 } snMspsOspfDistInOutRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsOspfDistInOutRouteMapEntry 5 } -- FILTERING OBJECT DEFINITION END -- PREFERENCE OBJECT DEFINITION BEGIN snMspsOspfPreferenceGroup OBJECT IDENTIFIER ::= { snMspsOspf 16 } snMspsOspfPreferenceValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference value for OSPF routes. Use '0' to set default value" DEFVAL { 0 } ::= { snMspsOspfPreferenceGroup 1 } -- PREFERENCE OBJECT DEFINITION END -- snMspsOspf 18-20 reserved -- Secondary Address Support OBJECT DEFINITION BEGIN -- Secondary IP Address Table snMspsOspfSecIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfSecIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Secondary IP Address information." ::= { snMspsOspf 21 } snMspsOspfSecIfEntry OBJECT-TYPE SYNTAX SnMspsOspfSecIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX {snMspsOspfPrimIpAddr,snMspsOspfPrimAddresslessIf,snMspsOspfSecIpAddr,snMspsOspfSecIpAddrMask} ::= { snMspsOspfSecIfTable 1 } SnMspsOspfSecIfEntry ::= SEQUENCE { snMspsOspfPrimIpAddr IpAddress, snMspsOspfPrimAddresslessIf InterfaceIndex, snMspsOspfSecIpAddr IpAddress, snMspsOspfSecIpAddrMask IpAddress, snMspsOspfSecIfStatus RowStatus } snMspsOspfPrimIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Primary Interface IP Address." ::= { snMspsOspfSecIfEntry 1 } snMspsOspfPrimAddresslessIf OBJECT-TYPE SYNTAX InterfaceIndex (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Primary Interface Addressless Index." ::= { snMspsOspfSecIfEntry 2 } snMspsOspfSecIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Secondary Interface IP Address." ::= { snMspsOspfSecIfEntry 3 } snMspsOspfSecIpAddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Secondary Interface IP Address Mask." ::= { snMspsOspfSecIfEntry 4 } snMspsOspfSecIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { snMspsOspfSecIfEntry 5 } -- Secondary Address Support OBJECT DEFINITION END -- Overview Table containing both primary and secondary addresses OBJECT DEFINITION BEGIN snMspsOspfOverviewIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspfOverviewIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Primary and Secondary IP Address information." ::= { snMspsOspf 25 } snMspsOspfOverviewIfEntry OBJECT-TYPE SYNTAX SnMspsOspfOverviewIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX {snMspsOspfOverviewIfPrimIpAddr,snMspsOspfOverviewIfPrimAddresslessIf,snMspsOspfOverviewIfSecIpAddr,snMspsOspfOverviewIfSecIpAddrMask } ::= { snMspsOspfOverviewIfTable 1 } SnMspsOspfOverviewIfEntry ::= SEQUENCE { snMspsOspfOverviewIfPrimIpAddr IpAddress, snMspsOspfOverviewIfPrimAddresslessIf InterfaceIndex, snMspsOspfOverviewIfSecIpAddr IpAddress, snMspsOspfOverviewIfSecIpAddrMask IpAddress, snMspsOspfOverviewIfStatus Integer32 } snMspsOspfOverviewIfPrimIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Primary Interface IP Address." ::= { snMspsOspfOverviewIfEntry 1 } snMspsOspfOverviewIfPrimAddresslessIf OBJECT-TYPE SYNTAX InterfaceIndex (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Primary Interface Addressless Index." ::= { snMspsOspfOverviewIfEntry 2 } snMspsOspfOverviewIfSecIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Secondary Interface IP Address." ::= { snMspsOspfOverviewIfEntry 3 } snMspsOspfOverviewIfSecIpAddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Secondary Interface IP Address Mask." ::= { snMspsOspfOverviewIfEntry 4 } snMspsOspfOverviewIfStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This variable displays the status of the entry." ::= { snMspsOspfOverviewIfEntry 5 } -- Secondary Address Support OBJECT DEFINITION END -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapOSPFStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Device changed OSPF route state." ::= { snMspsTrapPrefix 2301 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- -- snMspsRip6 GROUP snMspsRip6Scalars OBJECT IDENTIFIER ::= { snMspsRip6 1 } snMspsRip6Tables OBJECT IDENTIFIER ::= { snMspsRip6 2 } -- rip6Scalars BEGIN snMspsRip6RoutePreference OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2), bestmetric(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The route prefered for forwarding a packet to a destination when a statically configured route, as well as a dynamically learnt route exists for a particular destination. If the value is set to bestmetric(3), the route with the best metric is the one to be used. Note that, this object would be referred only if both a static route and a dynamic route exists to the same destination." DEFVAL { bestmetric } ::= { snMspsRip6Scalars 1 } snMspsRip6GlobalDebug OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the tracing in RIP6. A 32 bit integer is used to store the Tracing level. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (including Packet Validation) BIT 7 - Buffer Trace. The remaining bits are unused. If a Particular Bit is set, the corresponding trace would be enabled. For Example, setting the debug value to 00000001000000000000000000000000 would enable all failure trace prints in RIP6 SubSystem." ::= { snMspsRip6Scalars 2 } snMspsRip6GlobalInstanceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifes Instance Index, used to indicate the instance w.r.t which all the configuration will be performed. Before any configuration this object has to be set to the specific Instance Index. This object will be of use only in case the RIPng module is supporting Multiple Instance. Ripng comes up with 0 as the default instance." ::= { snMspsRip6Scalars 3 } snMspsRip6PeerFilter OBJECT-TYPE SYNTAX INTEGER { allow (1), deny (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to set peer list to allow or deny. if the flag set to allow, then responses from the peers in the list can be allowed to be processed. If the flag is set to deny, the responses from the peers in the list are not allowed to be processed." DEFVAL { deny } ::= { snMspsRip6Scalars 4 } snMspsRip6AdvFilter OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to enable filtering of routes in the Ripng responses to be advertised. Setting the flag to enable(1) will filter the corresponding routing entries in the response, that are matching with the AdvFilter list. Setting it to disable(2) will disable the filter, meaning that all the entries in the response message are going to be advertised." DEFVAL { disable } ::= { snMspsRip6Scalars 5 } snMspsRip6RRDAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls redistribution of Direct, Static, OSPF and BGP routes into RIP. If this object is set to enable, then routes from protocols as specified by snMspsRip6RRDProtoMaskForEnable will be imported into RIP and the RIP learnt routes will be distributed to BGP and OSPF. If this object is set as disable, then the routes learned from protocols specified by snMspsRip6RRDProtoMaskForEnable will be removed from RIP and no route will be either distributed to or imported from OSPF anf BGP. This object can be set only if snMspsRip6GlobalAdminStatus is up. When the global admin state changes the snMspsRip6RRDAdminStatus also changes." DEFVAL { enable } ::= { snMspsRip6Scalars 6 } snMspsRip6RRDProtoMaskForEnable OBJECT-TYPE SYNTAX Integer32 -- See the description MAX-ACCESS read-write STATUS current DESCRIPTION "The bit mask of source protocols from which routes are imported to RIP.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes can be redistributed into RIP. (value = 2) Bit 2, if set, indicates that static routes can be redistributed into RIP. (value = 4) Bit 5, if set to 1, indicates that routes from OSPF can be redistributed into RIP. (value = 32) Bit 6, if set to 2, indicates that BGP routes can be redistributed into RIP. (value = 64) Other bits are reserved for future use." ::= { snMspsRip6Scalars 7 } snMspsRip6RRDSrcProtoMaskForDisable OBJECT-TYPE SYNTAX Integer32 -- See the description MAX-ACCESS read-write STATUS current DESCRIPTION "The bit mask of source protocols from which redistribution to BGP is disabled.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes cannot be redistributed into RIP. (value = 2) Bit 2, if set, indicates that static routes cannot be redistributed into RIP. (value = 4) Bit 5, if set to 1, indicates that routes from OSPF cannot be redistributed into RIP. (value = 32) Bit 6, if set to 2, indicates that BGP routes cannot be redistributed into RIP. (value = 64) Other bits are reserved for future use." ::= { snMspsRip6Scalars 8 } snMspsRip6RRDRouteDefMetric OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The default metric to be used for the imported routes from RTM6. If 0, then metric value from the RTM6 will be used." DEFVAL { 0 } ::= { snMspsRip6Scalars 9 } snMspsRip6RRDRouteMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value." ::= { snMspsRip6Scalars 10 } -- ripngScalars END -- ripngTable BEGIN -- IPv6 RIP Instance Table -- This table is relevent only when RIPng is supporting Multiple -- Instance Feature. -- This table contains Instance related parameters. -- The entry is created or deleted whenever a new Instance is to -- be created or deleted. snMspsRip6InstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6InstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains Instance related parameters. This table is a global table i.e. its not instance specific." ::= { snMspsRip6Tables 1 } snMspsRip6InstanceEntry OBJECT-TYPE SYNTAX SnMspsRip6InstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 RIP Instance Table. An entry is created/deleted in this table when the corresponding RIP6 instance is created/deleted." INDEX { snMspsRip6InstanceIndex } ::= { snMspsRip6InstanceTable 1 } SnMspsRip6InstanceEntry ::= SEQUENCE { snMspsRip6InstanceIndex Integer32, snMspsRip6InstanceStatus INTEGER } snMspsRip6InstanceIndex OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the RIPng Instance." ::= { snMspsRip6InstanceEntry 1 } snMspsRip6InstanceStatus OBJECT-TYPE SYNTAX INTEGER { down(0), -- Instance Deleted up(1) -- Instance Created } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the specific Instance whether UP or DOWN." DEFVAL { 1 } ::= { snMspsRip6InstanceEntry 2 } -- End of Instance Table -- IPv6 RIP Instance Interface Map Table -- This table is relevent only when RIPng is supporting Multiple -- Instance Feature. -- This table contains Instance-Interface Mapping parameters. -- The entry in this table is created whenever an Interface gets -- attached to an Instance and deleted whenever and Instance get -- deleted or an Interface gets detached from an Instance. snMspsRip6InstIfMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6InstIfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains Instance-If mapping parametersits. This is a global table ie its not instance specific." ::= { snMspsRip6Tables 2 } snMspsRip6InstIfMapEntry OBJECT-TYPE SYNTAX SnMspsRip6InstIfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in this table is created whenever an Interface gets attached to an Instance and deleted whenever and Instance get deleted or an Interface gets detached from an Instance." INDEX { snMspsRip6IfIndex } ::= { snMspsRip6InstIfMapTable 1 } SnMspsRip6InstIfMapEntry ::= SEQUENCE { snMspsRip6IfIndex Integer32, snMspsRip6InstIfMapInstId Integer32, snMspsRip6InstIfMapIfAtchStatus INTEGER } snMspsRip6IfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the RIPng Interface." ::= { snMspsRip6InstIfMapEntry 1 } snMspsRip6InstIfMapInstId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the RIPng Instance to which a RIPng Interface is attached. When a row is created in this table this object is assigned the value of snMspsRip6GlobalInstanceIndex " ::= { snMspsRip6InstIfMapEntry 2 } snMspsRip6InstIfMapIfAtchStatus OBJECT-TYPE SYNTAX INTEGER { detached(0), -- Interface is detached -- from Instance attached(1) -- Interface attached -- to an Instance } MAX-ACCESS read-write STATUS current DESCRIPTION "The attachment status of a RIPng Interface, whether attached to an instance or not." ::= { snMspsRip6InstIfMapEntry 3 } -- END of Instance Interface Map Table. -- IPv6 RIP Interface Table -- This table contains interface-based RIPng parameters -- Entries created/deleted in this table when corresponding -- IPv6 interface is created/deleted. -- Entries exist in this table even if RIPng protocol is not -- running on the interface as static routes are also maintained -- in the RIP routing table. snMspsRip6RipIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6RipIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing interface-related RIPng parameters." ::= { snMspsRip6Tables 3 } snMspsRip6RipIfEntry OBJECT-TYPE SYNTAX SnMspsRip6RipIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 RIP Interface Table. An entry is created/deleted in this table when corresponding IPv6 interface is created/deleted." INDEX { snMspsRip6RipIfIndex } ::= { snMspsRip6RipIfTable 1 } SnMspsRip6RipIfEntry ::= SEQUENCE { snMspsRip6RipIfIndex Integer32, snMspsRip6RipIfProfileIndex Integer32, snMspsRip6RipIfCost Integer32, snMspsRip6RipIfOperStatus INTEGER, snMspsRip6RipIfProtocolEnable INTEGER, snMspsRip6RipIfInMessages Counter32, snMspsRip6RipIfInRequests Counter32, snMspsRip6RipIfInResponses Counter32, snMspsRip6RipIfUnknownCmds Counter32, snMspsRip6RipIfInOtherVer Counter32, snMspsRip6RipIfInDiscards Counter32, snMspsRip6RipIfOutMessages Counter32, snMspsRip6RipIfOutRequests Counter32, snMspsRip6RipIfOutResponses Counter32, snMspsRip6RipIfOutTrigUpdates Counter32, snMspsRip6RipIfDefRouteAdvt INTEGER } snMspsRip6RipIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the IPv6 interface on which this snMspsRip6RipIfEntry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsRip6IfIndex." ::= { snMspsRip6RipIfEntry 1 } snMspsRip6RipIfProfileIndex OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Index into the RIPng Profile Table which contains the RIPng parameters for this interface." DEFVAL { 0 } ::= { snMspsRip6RipIfEntry 2 } snMspsRip6RipIfCost OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The 'cost' associated with this interface. This 'cost' is added to the metric of all routes learnt over this interface before they are installed in the routing table." DEFVAL { 1 } ::= { snMspsRip6RipIfEntry 3 } snMspsRip6RipIfOperStatus OBJECT-TYPE SYNTAX INTEGER { enabledup(1),-- Interface operational -- and RIPng is enabled on it enableddown(2),-- Interface not operational -- but RIPng is enabled on it disabledup(3),-- Interface operational -- and RIPng not enabled on it disableddown(4)-- Interface not operational -- and RIPng not enabled on it } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of this interface and whether RIPng is enabled/disabled on it." ::= { snMspsRip6RipIfEntry 4 } snMspsRip6RipIfProtocolEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), -- RIPng is Enabled -- Over this Interface disable(2) --RIPng is Disabled --Over this Interface } MAX-ACCESS read-write STATUS current DESCRIPTION "RIPng is enabled over this Interface or Not." DEFVAL { disable } ::= { snMspsRip6RipIfEntry 5 } snMspsRip6RipIfInMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng messages received on this interface. " ::= { snMspsRip6RipIfEntry 6 } snMspsRip6RipIfInRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng Requests received on this interface. " ::= { snMspsRip6RipIfEntry 7 } snMspsRip6RipIfInResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng Responses received on this interface. " ::= { snMspsRip6RipIfEntry 8 } snMspsRip6RipIfUnknownCmds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng packets with unknown command received on this interface." ::= { snMspsRip6RipIfEntry 9 } snMspsRip6RipIfInOtherVer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng packets received with other version on this interface." ::= { snMspsRip6RipIfEntry 10 } snMspsRip6RipIfInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received RIPng packets that were discarded." ::= { snMspsRip6RipIfEntry 11 } snMspsRip6RipIfOutMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng messages sent out on this interface." ::= { snMspsRip6RipIfEntry 12 } snMspsRip6RipIfOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng Requests sent out on this interface." ::= { snMspsRip6RipIfEntry 13 } snMspsRip6RipIfOutResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RIPng Responses sent out on this interface." ::= { snMspsRip6RipIfEntry 14 } snMspsRip6RipIfOutTrigUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of triggered updates sent out on this interface." ::= { snMspsRip6RipIfEntry 15 } snMspsRip6RipIfDefRouteAdvt OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object controls the advertisement of default route over this interface." DEFVAL { 0 } ::= { snMspsRip6RipIfEntry 16 } -- IPv6 RIP Profile Table -- This table specifies the RIPng related parameters which are -- referred by interfaces on which RIPng protocol is enabled. -- Entries are created/deleted from SNMP except for the first profile -- entry which is autocreated and cannot be deleted. snMspsRip6RipProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6RipProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing RIPng related configurable parameters which are maintained as a profile and referred by the snMspsRip6RipIfTable." ::= { snMspsRip6Tables 4 } snMspsRip6RipProfileEntry OBJECT-TYPE SYNTAX SnMspsRip6RipProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in the IPv6 Address Profile Table which contains RIPng parameters. One or more RIP interfaces refer to this profile through the object snMspsRip6RipIfProfileIndex in the snMspsRip6RipIfTable. An entry of this table other than the first entry is created/deleted from SNMP." INDEX { snMspsRip6RipProfileIndex } ::= { snMspsRip6RipProfileTable 1 } SnMspsRip6RipProfileEntry ::= SEQUENCE { snMspsRip6RipProfileIndex Integer32, snMspsRip6RipProfileStatus INTEGER, snMspsRip6RipProfileHorizon INTEGER, snMspsRip6RipProfilePeriodicUpdTime Integer32, snMspsRip6RipProfileTrigDelayTime Integer32, snMspsRip6RipProfileRouteAge Integer32, snMspsRip6RipProfileGarbageCollectTime Integer32 } snMspsRip6RipProfileIndex OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the particular IPv6 RIP profile. This is referred by snMspsRip6RipIfProfileIndex of the IPv6 RIP interface Table." ::= { snMspsRip6RipProfileEntry 1 } snMspsRip6RipProfileStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2)." ::= { snMspsRip6RipProfileEntry 2 } snMspsRip6RipProfileHorizon OBJECT-TYPE SYNTAX INTEGER { -- indicates that no-horizoning -- be done on the interface nohorizon(1) , -- while sending updates -- indicates that split- -- horizoning be done on the -- interface while sending splithorizon(2), -- updates -- indicates that poison -- reverse be done on the -- interface while sending poisonreverse(3) -- updates } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of horizoning to be done while sending routing informations (learnt on that interface) over that interface. If the configured value is split-horizon(2) then routes learnt on a interface are not sent over that interface. If the configured value is poison-reverse(3) then such routes are sent with a metric of 16." DEFVAL { poisonreverse } ::= { snMspsRip6RipProfileEntry 3 } snMspsRip6RipProfilePeriodicUpdTime OBJECT-TYPE SYNTAX Integer32 (30..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval in seconds between the periodic RIPng updates." DEFVAL { 30 } ::= { snMspsRip6RipProfileEntry 4 } snMspsRip6RipProfileTrigDelayTime OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the time interval in seconds by which further triggered updates are delayed after one triggered update is sent." DEFVAL { 5 } ::= { snMspsRip6RipProfileEntry 5 } snMspsRip6RipProfileRouteAge OBJECT-TYPE SYNTAX Integer32 (180..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the period in seconds for which a dynamic route will be kept in the IPv6 RIP routing table without receiving any updates for the route. After this time interval, the route will not be valid and will be aged out." DEFVAL { 180 } ::= { snMspsRip6RipProfileEntry 6 } snMspsRip6RipProfileGarbageCollectTime OBJECT-TYPE SYNTAX Integer32 (120..180) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the period in seconds for which a route which has aged out is retained in the IPv6 RIP Routing Table. After this time interval the route is deleted from the IPv6 RIP Routing Table." DEFVAL { 120 } ::= { snMspsRip6RipProfileEntry 7 } -- RIPng Routing Table -- The RIPng routing table contains an entry for each -- valid IPv6 unicast routes that can be used for packet -- forwarding. There are no entries for Multicast and -- Link-Local addresses. -- This table contains non-RIPng routes learnt via redistribution -- from IPv6 and dynamic routes (updated by RIPng). -- Entries are created/deleted to this table through -- 1. Redistributed from IPv6 -- 2. routes learnt from other RIPng Peers snMspsRip6RipRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6RipRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains dynamic routes that are learnt through RIPng protocol as well as non-RIPng routes learnt via redistribution." ::= { snMspsRip6Tables 5 } snMspsRip6RipRouteEntry OBJECT-TYPE SYNTAX SnMspsRip6RipRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RIPng Routing Table. An entry can be created by means of the RIPng protocol and redistributed routes from IPv6. There can be a non-RIPng route as well as a RIPng route with the same destination and prefix length." INDEX { snMspsRip6RipRouteDest, snMspsRip6RipRoutePfxLength, snMspsRip6RipRouteProtocol, snMspsRip6RipRouteIfIndex } ::= { snMspsRip6RipRouteTable 1 } SnMspsRip6RipRouteEntry ::= SEQUENCE { snMspsRip6RipRouteDest OCTET STRING, snMspsRip6RipRoutePfxLength Integer32, snMspsRip6RipRouteProtocol INTEGER, snMspsRip6RipRouteIfIndex Integer32, snMspsRip6RipRouteNextHop OCTET STRING , snMspsRip6RipRouteMetric Integer32, snMspsRip6RipRouteTag Integer32, snMspsRip6RipRouteAge Integer32 } snMspsRip6RipRouteDest OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value." ::= { snMspsRip6RipRouteEntry 1 } snMspsRip6RipRoutePfxLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the prefix length of the destination address." ::= { snMspsRip6RipRouteEntry 2 } snMspsRip6RipRouteProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following local(2), -- non-protocol information, -- e.g., manually configured -- entries netmgmt(3), -- static route ndisc(4), -- e.g., Redirect -- the following are all -- dynamic routing protocols rip(5), -- RIPng ospf(6), -- Open Shortest Path First idrp(7) -- InterDomain Routing Protocol } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix." ::= { snMspsRip6RipRouteEntry 3 } snMspsRip6RipRouteIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of snMspsRip6IfIndex." ::= { snMspsRip6RipRouteEntry 4 } snMspsRip6RipRouteNextHop OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Next hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { snMspsRip6RipRouteEntry 5 } snMspsRip6RipRouteMetric OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The routing metric associated with this route. A metric of 16 indicates infinity implying the route is no longer valid." DEFVAL { 1 } ::= { snMspsRip6RipRouteEntry 6 } snMspsRip6RipRouteTag OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent routes are external to the routing domain." ::= { snMspsRip6RipRouteEntry 7 } snMspsRip6RipRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, this object has value 0." ::= { snMspsRip6RipRouteEntry 8 } -- SnMspsRip6PeerTable snMspsRip6RipPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6RipPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Addresses of those Peers whose RIPng Responses are to be accepted or denied" ::= { snMspsRip6Tables 6 } snMspsRip6RipPeerEntry OBJECT-TYPE SYNTAX SnMspsRip6RipPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Single entity in the snMspsRip6RipPeerTable." INDEX { snMspsRip6RipPeerAddr } ::= { snMspsRip6RipPeerTable 1 } SnMspsRip6RipPeerEntry ::= SEQUENCE { snMspsRip6RipPeerAddr OCTET STRING, snMspsRip6RipPeerEntryStatus INTEGER } snMspsRip6RipPeerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Address of the Peer, from whom Responses are to be Allowed or Denied" ::= { snMspsRip6RipPeerEntry 1 } snMspsRip6RipPeerEntryStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. " ::= { snMspsRip6RipPeerEntry 2} -- SnMspsRip6RipAdvFilterTable snMspsRip6RipAdvFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6RipAdvFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the routes which are NOT to be advertised in the RIPng Responses sent by the router, if snMspsRip6AdvFilter is enabled" ::= { snMspsRip6Tables 7 } snMspsRip6RipAdvFilterEntry OBJECT-TYPE SYNTAX SnMspsRip6RipAdvFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Single entity in the snMspsRip6RipAdvFilterTable" INDEX { snMspsRip6RipAdvFilterAddress } ::= { snMspsRip6RipAdvFilterTable 1 } SnMspsRip6RipAdvFilterEntry ::= SEQUENCE { snMspsRip6RipAdvFilterAddress OCTET STRING, snMspsRip6RipAdvFilterStatus INTEGER } snMspsRip6RipAdvFilterAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The route(s) with this address is NOT to be advertised to the Peers, if snMspsRip6AdvFilter is enabled" ::= { snMspsRip6RipAdvFilterEntry 1 } snMspsRip6RipAdvFilterStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. " ::= { snMspsRip6RipAdvFilterEntry 2 } --ripngTable END -- FILTERING OBJECT DEFINITION BEGIN snMspsRip6DistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsRip6 3 } snMspsRip6DistInOutRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRip6DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of filtering for route map." ::= { snMspsRip6DistInOutRouteMap 1 } snMspsRip6DistInOutRouteMapEntry OBJECT-TYPE SYNTAX SnMspsRip6DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the filtering configuration of single entry." INDEX {snMspsRip6DistInOutRouteMapName, snMspsRip6DistInOutRouteMapType} ::= { snMspsRip6DistInOutRouteMapTable 1 } SnMspsRip6DistInOutRouteMapEntry ::= SEQUENCE { snMspsRip6DistInOutRouteMapName DisplayString, snMspsRip6DistInOutRouteMapType Integer32, snMspsRip6DistInOutRouteMapValue Integer32, snMspsRip6DistInOutRouteMapRowStatus RowStatus } snMspsRip6DistInOutRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map name." ::= { snMspsRip6DistInOutRouteMapEntry 1 } snMspsRip6DistInOutRouteMapType OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out" ::= { snMspsRip6DistInOutRouteMapEntry 3 } snMspsRip6DistInOutRouteMapValue OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value ( this will be unused for distribute list )" ::= { snMspsRip6DistInOutRouteMapEntry 4 } snMspsRip6DistInOutRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRip6DistInOutRouteMapEntry 5 } -- FILTERING OBJECT DEFINITION END -- PREFERENCE OBJECT DEFINITION BEGIN snMspsRip6PreferenceGroup OBJECT IDENTIFIER ::= { snMspsRip6 4 } snMspsRip6PreferenceValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference value for RIP6 routes. If the value is set as '0',it will inturn be mapped to default value " DEFVAL { 120 } ::= { snMspsRip6PreferenceGroup 1 } -- PREFERENCE OBJECT DEFINITION END -- ---------------------- -- snmspsospf3.mib -- -- SIEMENS AG -- Industry Automation Division -- -- OSPFv3 Proprietary MIB. -- -- -- Copyright (c) 2014 Siemens AG -- All rights reserved. -- ---------------------- -- OSPF General Variables -- These parameters apply globally to the Router's -- OSPF Process. snMspsOspf3GeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf3 1 } snMspsOspf3Notification OBJECT IDENTIFIER ::= { snMspsOspf3 101 } -- SCALAR_TABLE_BEGIN snMspsOspf3GeneralGroup 7 snMspsOspf3OverFlowState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether router is in overflow state or not." DEFVAL { false } ::= { snMspsOspf3GeneralGroup 1 } snMspsOspf3TraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to define level of trace required for OSPF. Levels are defined as follows. 0x00000100 -- Packet High Level Dump Trace. 0x00000200 -- Packet Low Level Dump Trace. 0x00000400 -- Packet Hex Dump Trace. 0x00000800 -- Critical Trace. 0x00001000 -- Function Entry Trace. 0x00002000 -- Function Exit Trace. 0x00004000 -- Memory Allocation Success Trace. 0x00008000 -- Memory Allocation Failure Trace. 0x00010000 -- Hello packet Trace. 0x00020000 -- DDP packet Trace. 0x00040000 -- Link State Request Packet Trace. 0x00080000 -- Link State Update Packet Trace. 0x00100000 -- Link State Acknowledge Packet Trace. 0x00200000 -- Interface State Machine Trace. 0x00400000 -- Neighbor State Machine Trace. 0x00800000 -- Routing Table Calculation Trace. 0x01000000 -- RTM Module Trace. 0x02000000 -- Interface Trace. 0x04000000 -- NSSA Trace. 0x08000000 -- Route Aggregation Trace. 0x10000000 -- Configuration Trace. 0x20000000 -- Adjacency formation Trace. 0x40000000 -- Link State Database Trace. 0x80000000 -- Protocol Packet Processing Trace." DEFVAL { '00000800'H } ::= { snMspsOspf3GeneralGroup 2 } snMspsOspf3ABRType OBJECT-TYPE SYNTAX INTEGER { standardABR (1), ciscoABR (2), ibmABR (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Different Types of ABRs supported" REFERENCE "RFC-3509 -- Alternative Implementations of OSPF Area Border Routers" DEFVAL { standardABR } ::= { snMspsOspf3GeneralGroup 3 } snMspsOspf3NssaAsbrDefRtTrans OBJECT-TYPE SYNTAX INTEGER { enabled (1) , disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When set to enabled, P-Bit is set in the generated Type-7 default Lsa. " DEFVAL { disabled } ::= { snMspsOspf3GeneralGroup 4 } snMspsOspf3DefaultPassiveInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not be passive." DEFVAL { false } ::= { snMspsOspf3GeneralGroup 5 } snMspsOspf3SpfDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The Delay at which routing calculation is carried after a topology change." DEFVAL {5} ::= { snMspsOspf3GeneralGroup 6 } snMspsOspf3SpfHoldTime OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The minimum time between two consecutive SPF calculations." DEFVAL {10} ::= { snMspsOspf3GeneralGroup 7 } snMspsOspf3RTStaggeringInterval OBJECT-TYPE SYNTAX Integer32 (1000..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPFv3 operations. Refault value of this object is equal to Hello Interval" DEFVAL {10000} ::= { snMspsOspf3GeneralGroup 8 } snMspsOspf3RTStaggeringStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of route table calculation staggering option" DEFVAL { enable } ::= { snMspsOspf3GeneralGroup 9 } -- OSPFv3 Graceful Restart related MIB objects snMspsOspf3RestartStrictLsaChecking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL { false } ::= { snMspsOspf3GeneralGroup 10 } snMspsOspf3HelperSupport OBJECT-TYPE SYNTAX BITS { unknown (0), softwareRestart (1), swReloadUpgrade (2), switchToRedundant(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The router's helper support for OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. snMspsOspf3HelperSupport is indicated by bitmap. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. By default, all bits are set." ::= { snMspsOspf3GeneralGroup 11 } snMspsOspf3HelperGraceTimeLimit OBJECT-TYPE SYNTAX Integer32 (0..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's grace period received from grace LSA. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {0} ::= { snMspsOspf3GeneralGroup 12 } snMspsOspf3RestartAckState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {enabled} ::= { snMspsOspf3GeneralGroup 13 } snMspsOspf3GraceLsaRetransmitCount OBJECT-TYPE SYNTAX Integer32 (0..180) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retransmissions for unacknowledged GraceLSAs" DEFVAL {2} ::= { snMspsOspf3GeneralGroup 14 } snMspsOspf3RestartReason OBJECT-TYPE SYNTAX INTEGER { unknown (0), softwareRestart (1), swReloadUpgrade (2), switchToRedundant(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The router's restarter reason code of OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {unknown} ::= { snMspsOspf3GeneralGroup 15 } snMspsOspf3ExtTraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to define level of trace required for OSPFv3 GR. Levels are defined as follows. 0x00000000 -- No Trace Support. 0x00000001 -- Restarting Router Trace. 0x00000002 -- Helper Trace." ::= { snMspsOspf3GeneralGroup 16 } snMspsOspf3SetTraps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to enable and disable specific OSPFv3 traps. Currently the following are defined 0x00000000 - Traps are not enabled. 0x00000001 - Restarting router status changes 0x00000002 - Nieghbor Helper status changes 0x00000004 - Virtual Neighbor Helper Status Changes. 0x00000008 - Hot Standby state changes" ::= { snMspsOspf3GeneralGroup 17 } -- Start of Scalar MIB objects related to OSPFv3 Hot-Standby snMspsOspf3HotStandbyAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "High Availabilty feature enabled or disabled in OSPFv3" ::= { snMspsOspf3GeneralGroup 18 } snMspsOspf3HotStandbyState OBJECT-TYPE SYNTAX INTEGER { init(1), activeStandbyUp(2), activeStandbyDown(3), standby(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Internal State of the OSPFv3 instance. init(1) - OSPFv3 instance is up and RM State is undetermined. activeStandbyUp(2) - The RM state is active & standby is up. activeStandbyDown(3) - The RM state is active & standby down. standby(4) - The RM state is standby." ::= { snMspsOspf3GeneralGroup 19 } snMspsOspf3DynamicBulkUpdStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), completed(3), aborted(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of dynamic bulk update between active and dynamic OSPFv3 instance. notStarted(1): Dynamic Bulk Update has not yet been started. inProgress(2): Dynamic Bulk Update is in Progress. completed (3): Dynamic Bulk Update is complete. aborted (4): Dynamic Bulk Update is aborted." ::= { snMspsOspf3GeneralGroup 20 } snMspsOspf3StandbyHelloSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hello packets synced to standby node." ::= { snMspsOspf3GeneralGroup 21 } snMspsOspf3StandbyLsaSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of LSAs synced to standby node." ::= { snMspsOspf3GeneralGroup 22 } -- SCALAR_TABLE_END snMspsOspf3GeneralGroup -- Siemens OSPF Interface Table -- The snMspsOspf3IfTable is an extention to the ospfIfTable -- and has statistical information associted with each interface. snMspsOspf3IfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters." ::= { snMspsOspf3 2 } snMspsOspf3IfEntry OBJECT-TYPE SYNTAX SnMspsOspf3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3." INDEX { snMspsOspf3IfIndex } ::= { snMspsOspf3IfTable 1 } SnMspsOspf3IfEntry ::= SEQUENCE { snMspsOspf3IfIndex InterfaceIndex, snMspsOspf3IfOperState INTEGER, snMspsOspf3IfPassive TruthValue, snMspsOspf3IfNbrCount Gauge32, snMspsOspf3IfAdjCount Gauge32, snMspsOspf3IfHelloRcvd Counter32, snMspsOspf3IfHelloTxed Counter32, snMspsOspf3IfHelloDisd Counter32, snMspsOspf3IfDdpRcvd Counter32, snMspsOspf3IfDdpTxed Counter32, snMspsOspf3IfDdpDisd Counter32, snMspsOspf3IfLrqRcvd Counter32, snMspsOspf3IfLrqTxed Counter32, snMspsOspf3IfLrqDisd Counter32, snMspsOspf3IfLsuRcvd Counter32, snMspsOspf3IfLsuTxed Counter32, snMspsOspf3IfLsuDisd Counter32, snMspsOspf3IfLakRcvd Counter32, snMspsOspf3IfLakTxed Counter32, snMspsOspf3IfLakDisd Counter32, snMspsOspf3IfLinkLSASuppression TruthValue } snMspsOspf3IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured." ::= { snMspsOspf3IfEntry 1 } snMspsOspf3IfOperState OBJECT-TYPE SYNTAX INTEGER { operup (1), operdown (2), loopback (3), unloop (4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { snMspsOspf3IfEntry 2 } snMspsOspf3IfPassive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal" DEFVAL { false } ::= { snMspsOspf3IfEntry 3 } snMspsOspf3IfNbrCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Neighbour's through that Interface." ::= { snMspsOspf3IfEntry 4 } snMspsOspf3IfAdjCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Adjacencies through that Interface." ::= { snMspsOspf3IfEntry 5 } snMspsOspf3IfHelloRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets received through that Interface." ::= { snMspsOspf3IfEntry 6 } snMspsOspf3IfHelloTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets transmitted through that Interface." ::= { snMspsOspf3IfEntry 7 } snMspsOspf3IfHelloDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets discarded through that Interface." ::= { snMspsOspf3IfEntry 8 } snMspsOspf3IfDdpRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets received through that Interface." ::= { snMspsOspf3IfEntry 9 } snMspsOspf3IfDdpTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets transmitted through that Interface." ::= { snMspsOspf3IfEntry 10 } snMspsOspf3IfDdpDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets discarded through that Interface." ::= { snMspsOspf3IfEntry 11 } snMspsOspf3IfLrqRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets received through that Interface." ::= { snMspsOspf3IfEntry 12 } snMspsOspf3IfLrqTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets transmitted through that Interface." ::= { snMspsOspf3IfEntry 13 } snMspsOspf3IfLrqDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets discarded through that Interface." ::= { snMspsOspf3IfEntry 14 } snMspsOspf3IfLsuRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets received through that Interface." ::= { snMspsOspf3IfEntry 15 } snMspsOspf3IfLsuTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets transmitted through that Interface." ::= { snMspsOspf3IfEntry 16 } snMspsOspf3IfLsuDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets discarded through that Interface." ::= { snMspsOspf3IfEntry 17 } snMspsOspf3IfLakRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets received through that Interface." ::= { snMspsOspf3IfEntry 18 } snMspsOspf3IfLakTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets transmitted through that Interface." ::= { snMspsOspf3IfEntry 19 } snMspsOspf3IfLakDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets discarded on that Interface." ::= { snMspsOspf3IfEntry 20 } snMspsOspf3IfLinkLSASuppression OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the origination." REFERENCE "OSPF for IPv6, Appendix C.3, Router Interface Parameters" DEFVAL { false } ::= { snMspsOspf3IfEntry 21 } -- Routing Table snMspsOspf3RoutingTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3RoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of routing information." ::= { snMspsOspf3 3 } snMspsOspf3RoutingEntry OBJECT-TYPE SYNTAX SnMspsOspf3RoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX { snMspsOspf3RouteDestType,snMspsOspf3RouteDest, snMspsOspf3RoutePfxLength,snMspsOspf3RouteNextHopType, snMspsOspf3RouteNextHop } ::= { snMspsOspf3RoutingTable 1 } SnMspsOspf3RoutingEntry ::= SEQUENCE { snMspsOspf3RouteDestType InetAddressType, snMspsOspf3RouteDest InetAddress, snMspsOspf3RoutePfxLength InetAddressPrefixLength, snMspsOspf3RouteNextHopType InetAddressType, snMspsOspf3RouteNextHop InetAddress, snMspsOspf3RouteType INTEGER, snMspsOspf3RouteAreaId AreaID, snMspsOspf3RouteCost BigMetric, snMspsOspf3RouteType2Cost BigMetric, snMspsOspf3RouteInterfaceIndex Integer32 } snMspsOspf3RouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of snMspsOspf3RouteDestType. Only IPv6 addresses are expected." ::= { snMspsOspf3RoutingEntry 1 } snMspsOspf3RouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Desitnation IPv6 Address of this route." ::= { snMspsOspf3RoutingEntry 2 } snMspsOspf3RoutePfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the prefix length of the destination Address." ::= { snMspsOspf3RoutingEntry 3 } snMspsOspf3RouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type ofsnMspsOspf3RouteNextHopType. Only IPv6 addresses are expected." ::= { snMspsOspf3RoutingEntry 4 } snMspsOspf3RouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Next Hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { snMspsOspf3RoutingEntry 5 } snMspsOspf3RouteType OBJECT-TYPE SYNTAX INTEGER { intraArea (1), interArea (2), type1External (3), type2External (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the route" ::= { snMspsOspf3RoutingEntry 6 } snMspsOspf3RouteAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION " Area ID associated with the route " ::= { snMspsOspf3RoutingEntry 7 } snMspsOspf3RouteCost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost are present, Type1 external metrics always take precedence." ::= { snMspsOspf3RoutingEntry 8 } snMspsOspf3RouteType2Cost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS is the major cost of routing a packet, and eliminates the need for conversion of external costs to internal link state metrics." ::= { snMspsOspf3RoutingEntry 9 } snMspsOspf3RouteInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " Interface Index associated with the route" ::= { snMspsOspf3RoutingEntry 10 } -- Siemens AsExternalAggregation Table snMspsOspf3AsExternalAggregationTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3AsExternalAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. " ::= { snMspsOspf3 4 } snMspsOspf3AsExternalAggregationEntry OBJECT-TYPE SYNTAX SnMspsOspf3AsExternalAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated whether aggregation is performed. " INDEX { snMspsOspf3AsExternalAggregationNetType, snMspsOspf3AsExternalAggregationNet, snMspsOspf3AsExternalAggregationPfxLength, snMspsOspf3AsExternalAggregationAreaId } ::= {snMspsOspf3AsExternalAggregationTable 1 } SnMspsOspf3AsExternalAggregationEntry ::= SEQUENCE { snMspsOspf3AsExternalAggregationNetType InetAddressType, snMspsOspf3AsExternalAggregationNet InetAddress, snMspsOspf3AsExternalAggregationPfxLength InetAddressPrefixLength, snMspsOspf3AsExternalAggregationAreaId AreaID, snMspsOspf3AsExternalAggregationEffect INTEGER, snMspsOspf3AsExternalAggregationTranslation INTEGER, snMspsOspf3AsExternalAggregationStatus RowStatus } snMspsOspf3AsExternalAggregationNetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of snMspsOspf3AsExternalAggregationNetType. Only IPv6 addresses are expected." ::= { snMspsOspf3AsExternalAggregationEntry 1 } snMspsOspf3AsExternalAggregationNet OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address of the Net indicated by the range. " ::= { snMspsOspf3AsExternalAggregationEntry 2 } snMspsOspf3AsExternalAggregationPfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length that pertains to the range. " ::= { snMspsOspf3AsExternalAggregationEntry 3 } snMspsOspf3AsExternalAggregationAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Refer to description in snMspsOspf3AsExternalAggregationEffect." ::= { snMspsOspf3AsExternalAggregationEntry 4 } snMspsOspf3AsExternalAggregationEffect OBJECT-TYPE SYNTAX INTEGER { advertise (1), doNotAdvertise (2), allowAll (3), denyAll (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggregated Type-5 are generated for the specified range. In addition aggregated Type-7 are generated in all attached NSSA areas, for the specified range.Value allowAll (3) is not valid for areaId other than 0.0.0.0. When set to 'denyAll' (4) neither Type-5 nor Type-7 will be generated for the specified range. Value denyAll (4) is not valid for areaID other than 0.0.0.0. When set to 'advertise' (1) and associated areaId is 0.0.0.0, aggregated Type-5 LSA is generated and all the NSSA LSAs falling in this address range are flushed out and no aggregated LSA of this address range is generated for NSSA Areas.Otherwise, if associated area-id is x.x.x.x (other than 0.0.0.0) aggregated Type-7 LSA is generated in NSSA area x.x.x.x. When set to 'doNotAdvertise' (2) and associated area-id is 0.0.0.0, Type-5 LSA is not generated for the specified range, while all the NSSA LSA falling in this range is flushed out and aggregated Type-7 NSSA LSA of this address range is generated in all attached NSSA areas.Otherwise, if associated area-id is x.x.x.x(other than 0.0.0.0), Type-7 are not generated in NSSA area x.x.x.x for the specified range. " DEFVAL { advertise } ::= { snMspsOspf3AsExternalAggregationEntry 5 } snMspsOspf3AsExternalAggregationTranslation OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. " DEFVAL { enabled } ::= { snMspsOspf3AsExternalAggregationEntry 6 } snMspsOspf3AsExternalAggregationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative." ::= { snMspsOspf3AsExternalAggregationEntry 7 } -- ABR/ASBR Routes Table snMspsOspf3BRRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3BRRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of routing information." ::= { snMspsOspf3 5 } snMspsOspf3BRRouteEntry OBJECT-TYPE SYNTAX SnMspsOspf3BRRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX {snMspsOspf3BRRouteDest, snMspsOspf3BRRouteNextHopType, snMspsOspf3BRRouteNextHop,snMspsOspf3BRRouteDestType} ::= { snMspsOspf3BRRouteTable 1 } SnMspsOspf3BRRouteEntry ::= SEQUENCE { snMspsOspf3BRRouteDest IpAddress, snMspsOspf3BRRouteNextHopType InetAddressType, snMspsOspf3BRRouteNextHop InetAddress, snMspsOspf3BRRouteDestType INTEGER, snMspsOspf3BRRouteType INTEGER, snMspsOspf3BRRouteAreaId AreaID, snMspsOspf3BRRouteCost BigMetric, snMspsOspf3BRRouteInterfaceIndex InterfaceIndex } snMspsOspf3BRRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id " ::= { snMspsOspf3BRRouteEntry 1 } snMspsOspf3BRRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of snMspsOspf3BRRouteNextHopType. Only IPv6 addresses are expected." ::= { snMspsOspf3BRRouteEntry 2 } snMspsOspf3BRRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Next Hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { snMspsOspf3BRRouteEntry 3 } snMspsOspf3BRRouteDestType OBJECT-TYPE SYNTAX INTEGER { areaBorder (2), asBoundary (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " Type of the route. The route can be ABR route entry or ASBR route entry " ::= { snMspsOspf3BRRouteEntry 4 } snMspsOspf3BRRouteType OBJECT-TYPE SYNTAX INTEGER { intraArea (1), interArea (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of the route " ::= { snMspsOspf3BRRouteEntry 5 } snMspsOspf3BRRouteAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION " Area ID associated with the route " ::= { snMspsOspf3BRRouteEntry 6 } snMspsOspf3BRRouteCost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " The cost associated with the route " ::= { snMspsOspf3BRRouteEntry 7 } snMspsOspf3BRRouteInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " Interface Index associated with the route " ::= { snMspsOspf3BRRouteEntry 8 } -- Redistribution configuration table. Attributes configured for this -- table will be applied during redistribution. snMspsOspf3RedistRouteCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3RedistRouteCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM." ::= { snMspsOspf3 6 } snMspsOspf3RedistRouteCfgEntry OBJECT-TYPE SYNTAX SnMspsOspf3RedistRouteCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the configuration of single route entry." INDEX {snMspsOspf3RedistRouteDestType, snMspsOspf3RedistRouteDest, snMspsOspf3RedistRoutePfxLength} ::= { snMspsOspf3RedistRouteCfgTable 1 } SnMspsOspf3RedistRouteCfgEntry ::= SEQUENCE { snMspsOspf3RedistRouteDestType InetAddressType, snMspsOspf3RedistRouteDest InetAddress, snMspsOspf3RedistRoutePfxLength InetAddressPrefixLength, snMspsOspf3RedistRouteMetric BigMetric, snMspsOspf3RedistRouteMetricType INTEGER, snMspsOspf3RedistRouteTagType INTEGER, snMspsOspf3RedistRouteTag Integer32, snMspsOspf3RedistRouteStatus RowStatus } snMspsOspf3RedistRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of snMspsOspf3RedistRouteDestType. Only IPv6 addresses are expected." ::= { snMspsOspf3RedistRouteCfgEntry 1 } snMspsOspf3RedistRouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Address of the Destination route." ::= { snMspsOspf3RedistRouteCfgEntry 2 } snMspsOspf3RedistRoutePfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Prefix Length of the Destination route." ::= { snMspsOspf3RedistRouteCfgEntry 3 } snMspsOspf3RedistRouteMetric OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric value applied to the route before it is adv. into the OSPFv3 Domain." DEFVAL { 10 } ::= { snMspsOspf3RedistRouteCfgEntry 4 } snMspsOspf3RedistRouteMetricType OBJECT-TYPE SYNTAX INTEGER { type1External (3), type2External (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric Type applied to the route before it is adv. into the OSPFv3 Domain" DEFVAL { type2External } ::= { snMspsOspf3RedistRouteCfgEntry 5 } snMspsOspf3RedistRouteTagType OBJECT-TYPE SYNTAX INTEGER { manual (1), automatic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsOspf3RedistRouteTag MIB has to be set with the Tag value needed." DEFVAL { manual } ::= { snMspsOspf3RedistRouteCfgEntry 6 } snMspsOspf3RedistRouteTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Route Tag in case the user configures a Manual option for the tags." DEFVAL { 0 } ::= { snMspsOspf3RedistRouteCfgEntry 7 } snMspsOspf3RedistRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative." ::= { snMspsOspf3RedistRouteCfgEntry 8 } -- RRD OBJECT DEFINITION BEGIN snMspsOspf3RRDGroup OBJECT IDENTIFIER ::= { snMspsOspf3 7 } snMspsOspf3RRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf3RRDGroup 1} -- SCALAR_TABLE_BEGIN snMspsOspf3RRDGeneralGroup 3 snMspsOspf3RRDStatus OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object enables/disables OSPFv3 to participate in Route Redistribution. If set to enabled, OSPFv3 will start advertising the routes learned by other protocols. If set to disabled, OSPFv3 will stop redisbution of routes. However, OSPFv3 will continue updating the Common Routing Table using the queue interface." DEFVAL { disabled } ::= { snMspsOspf3RRDGeneralGroup 1 } snMspsOspf3RRDSrcProtoMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The bit mask of source protocols from which routes are imported to OSPFv3. Bit 1, if set, indicates that local routes are redistributed into OSPFv3. (value = 2) if reset, indicates that local routes are not redistributed into OSPFv3. Bit 2, if set, indicates that static routes are redistributed into OSPFv3. (value = 4) if reset, indicates that static routes are not redistributed into OSPFv3. Bit 4, if set, indicates that routes from RIP are redistributed into OSPFv3. (value = 16) if reset, indicates that routes from RIP are not redistributed into OSPFv3. Bit 6, if set, indicates that routes from BGP are redistributed into OSPFv3. (value = 64) if reset, indicates that routes from BGP are not redistributed into OSPFv3. Other bits are reserved for future use." DEFVAL { 0 } ::= { snMspsOspf3RRDGeneralGroup 2 } snMspsOspf3RRDRouteMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps." ::= { snMspsOspf3RRDGeneralGroup 3 } -- SCALAR_TABLE_END snMspsOspf3RRDGeneralGroup -- FILTERING OBJECT DEFINITION BEGIN snMspsOspf3DistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsOspf3 8 } snMspsOspf3DistInOutRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsOspf3DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of filtering for route map." ::= { snMspsOspf3DistInOutRouteMap 1 } snMspsOspf3DistInOutRouteMapEntry OBJECT-TYPE SYNTAX SnMspsOspf3DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the filtering configuration of single entry." INDEX {snMspsOspf3DistInOutRouteMapName, snMspsOspf3DistInOutRouteMapType} ::= { snMspsOspf3DistInOutRouteMapTable 1 } SnMspsOspf3DistInOutRouteMapEntry ::= SEQUENCE { snMspsOspf3DistInOutRouteMapName DisplayString, snMspsOspf3DistInOutRouteMapType Integer32, snMspsOspf3DistInOutRouteMapValue Integer32, snMspsOspf3DistInOutRouteMapRowStatus RowStatus } snMspsOspf3DistInOutRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map name." ::= { snMspsOspf3DistInOutRouteMapEntry 1 } snMspsOspf3DistInOutRouteMapType OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out" ::= { snMspsOspf3DistInOutRouteMapEntry 2 } snMspsOspf3DistInOutRouteMapValue OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value ( this will be unused for distribute list )" ::= { snMspsOspf3DistInOutRouteMapEntry 3 } snMspsOspf3DistInOutRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsOspf3DistInOutRouteMapEntry 4 } -- FILTERING OBJECT DEFINITION END -- PREFERENCE OBJECT DEFINITION BEGIN snMspsospf3PreferenceGroup OBJECT IDENTIFIER ::= { snMspsOspf3 9 } snMspsOspf3PreferenceValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference value for OSPFv3 routes. Use '0' to set default value" DEFVAL { 0 } ::= { snMspsospf3PreferenceGroup 1 } -- PREFERENCE OBJECT DEFINITION END -- Trap Notification types for Graceful restart snMspsOspf3Traps OBJECT IDENTIFIER ::= { snMspsOspf3Notification 0 } snMspsOspf3TrapObject OBJECT IDENTIFIER ::= { snMspsOspf3Notification 1 } -- Trap objects for index variable to be used in notifications snMspsOspf3TrapNbrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The local link ID of the link over which the neighbor can be reached. This is used for Trap" ::= { snMspsOspf3TrapObject 1 } snMspsOspf3TrapVirtNbrRtrId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. This is used for Trap" ::= { snMspsOspf3TrapObject 2 } snMspsOspf3TrapNbrRtrId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. This is used for Trap" ::= { snMspsOspf3TrapObject 3 } snMspsOspf3TrapVirtNbrArea OBJECT-TYPE SYNTAX AreaID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Transit Area Identifier. This is used for Trap" ::= { snMspsOspf3TrapObject 4 } snMspsOspf3TrapBulkUpdAbortReason OBJECT-TYPE SYNTAX INTEGER { none(1), memAllocFailed(2), sendFailed(3), processFailed(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason for the failure of particular Bulk Update Abort." ::= { snMspsOspf3TrapObject 5 } -- END snMspsOspf3RestartStatusChange NOTIFICATION-TYPE OBJECTS { ospfv3RouterId, -- The originator of the trap ospfv3RestartStatus, ospfv3RestartInterval, ospfv3RestartExitReason } STATUS deprecated DESCRIPTION "An ospfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the router restart status changes." ::= { snMspsOspf3Traps 1 } snMspsOspf3NbrRestartHelperStatusChange NOTIFICATION-TYPE OBJECTS { ospfv3RouterId, -- The originator of the trap snMspsOspf3TrapNbrIfIndex, snMspsOspf3TrapNbrRtrId, ospfv3NbrRestartHelperStatus, ospfv3NbrRestartHelperAge, ospfv3NbrRestartHelperExitReason } STATUS deprecated DESCRIPTION "An snMspsOspf3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should be generated when the neighbor restart helper status transitions for a neighbor." ::= { snMspsOspf3Traps 2 } snMspsOspf3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE OBJECTS { ospfv3RouterId, -- The originator of the trap snMspsOspf3TrapVirtNbrArea, snMspsOspf3TrapVirtNbrRtrId, ospfv3VirtNbrRestartHelperStatus, ospfv3VirtNbrRestartHelperAge, ospfv3VirtNbrRestartHelperExitReason } STATUS deprecated DESCRIPTION "An snMspsOspf3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This trap should be generated when the virtual neighbor restart helper status transitions for a virtual neighbor." ::= { snMspsOspf3Traps 3 } -- Trap Notification for HA snMspsOspf3HotStandbyStateChgTrap NOTIFICATION-TYPE OBJECTS { ospfv3RouterId, -- The originator of the trap snMspsOspf3HotStandbyState } STATUS deprecated DESCRIPTION "A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module." ::= {snMspsOspf3Traps 4} snMspsOspf3HotStandbyBulkUpdAbortTrap NOTIFICATION-TYPE OBJECTS { ospfv3RouterId, -- The originator of the trap snMspsOspf3DynamicBulkUpdStatus, snMspsOspf3TrapBulkUpdAbortReason } STATUS deprecated DESCRIPTION "A notification is sent to the management entity whenever the bulk update is aborted" ::= {snMspsOspf3Traps 5} -- End of Trap notifications -- Textual Convention -- This Textual Convention enhance the readability of the specification. CompList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight components, with the first octet specifying components 1 through 8, the second octet specifying components 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered component, and the least significant bit represents the highest numbered component. Thus, each component is represented by a single bit within the value of this object. If that bit has a value of '1', then that component is included in the set of components; the component is not included if its bit has a value of '0'." SYNTAX OCTET STRING snMspsPimMIBObjects OBJECT IDENTIFIER ::= { snMspsPimMIB 1 } snMspsPimScalars OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 1 } snMspsPimTables OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 2 } snMspsPimTrapsControl OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 3 } snMspsPimTraps OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 4 } -- PRIVATE MIB implementation of standard PIM MIB for supporting -- both PIMv4 and PIMv6 snMspsPimStdScalars OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 5 } snMspsPimStdTables OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 6 } -- SCALAR_TABLE_BEGIN snMspsPimVersionString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the PIM protocol in the router" ::= { snMspsPimScalars 1 } -- -- Start of mib objects for data rate monitoring by the last hop router -- snMspsPimSPTGroupThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of data rate for any group when exceeded, source specific counters are initiated for that particular group It is based on number of bits per sec. To initiate SPT switching counter, this threshold MUST be configured" DEFVAL { 0 } ::= { snMspsPimScalars 2 } snMspsPimSPTSourceThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of data rate for any source when exceeded, switching to Shortest Path Tree is initiated. It is based on number of bits per sec. To switch to SPT, this threshold MUST be configured" DEFVAL { 0 } ::= { snMspsPimScalars 3 } snMspsPimSPTSwitchingPeriod OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period (in seconds)over which the data rate is to be monitored for initiating source specific counting or initiating switch to shortest path tree. Same period is used for monitoring data rate for both source and group. To switch to SPT, this period MUST be configured" DEFVAL { 0 } ::= { snMspsPimScalars 4 } -- -- End of mib objects for data rate monitoring by the last hop router -- -- -- Start of mib objects for monitoring number of register message by the RP -- snMspsPimSPTRpThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold at which the RP initiates switching to Source specific shortest path.It is based on number of registered packets received. To switch to SPT, this threshold MUST be configured" DEFVAL { 0 } ::= { snMspsPimScalars 5 } snMspsPimSPTRpSwitchingPeriod OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period (in seconds) over which RP monitors register packets for switching to the source specific shortest path tree. To switch to SPT, this period MUST be configured" DEFVAL { 0 } ::= { snMspsPimScalars 6 } -- -- End of mib objects for monitoring number of register message by the RP -- -- -- Start of mib objects for Register stop rate limitation -- snMspsPimRegStopRateLimitingPeriod OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period (in seconds) over which RP monitors number of register packets after sending the register stop message to the source of the register message for rate limiting the sending of register stop message" DEFVAL { 5 } ::= { snMspsPimScalars 7 } -- -- End of mib objects for register stop rate limitation -- snMspsPimMemoryAllocFailCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This counter holds the number of memory allocation failures " ::= { snMspsPimScalars 8 } snMspsPimGlobalTrace OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in PIM Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsPimScalars 9 } snMspsPimGlobalDebug OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Debug statements in PIM. A Four byte integer value is specified for enabling the level of debugging. Each bit in the four byte integer variable represents a level of debugging. The combination of levels are also allowed. The user have to enter the corresponding integer value for the bit set. The following values enable Debugging in following different modules of PIM. PIM_NBR_MODULE :0x00000001 PIM_GRP_MODULE :0x00000002 PIM_JP_MODULE :0x00000004 PIM_AST_MODULE :0x00000008 PIM_BSR_MODULE :0x00000010 PIM_IO_MODULE :0x00000020 PIM_PMBR_MODULE :0x00000040 PIM_MRT_MODULE :0x00000080 PIM_MDH_MODULE :0x00000100 PIM_MGMT_MODULE :0x00000200 PIMDM_DBG_SRM_MODULE :0x00000400 PIM_HA_MODULE :0x00000800 PIM_DF_MODULE :0x00001000 PIM_BMRT_MODULE :0x00002000 PIM_NPAPI_MODULE :0x00004000 PIM_INIT_SHUT_MODULE :0x00008000 PIM_OSRESOURCE_MODULE :0x00010000 PIM_BUFFER_MODULE :0x00020000 PIM_ENTRY_MODULE :0x00040000 PIM_EXIT_MODULE :0x00080000 PIM_ALL_MODULES :0x000fffff PIM_MAX_INT4 :0x7fffffff PIM_TRACE_DIS_FLAG :0x80000000 " DEFVAL { 0 } ::= { snMspsPimScalars 10 } snMspsPimPmbrStatus OBJECT-TYPE SYNTAX INTEGER { disable (1),enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The border bit which identifies the router as a border router" DEFVAL { 1 } ::= { snMspsPimScalars 11 } snMspsPimRouterMode OBJECT-TYPE SYNTAX INTEGER { ssmonly (1), smssm (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Mode of the Pim-SM router (ssm_only or sm_ssm )" DEFVAL { 2 } ::= { snMspsPimScalars 12 } snMspsPimStaticRpEnabled OBJECT-TYPE SYNTAX INTEGER { disable (0),enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flag which indicating that static configuration of RP is available" DEFVAL { 0 } ::= { snMspsPimScalars 13 } snMspsPimIpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of IPv4 Multicast Routing by PIM on this router." ::= { snMspsPimScalars 14 } snMspsPimIpv6Status OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of IPv6 Multicast Routing by PIM on this router." ::= { snMspsPimScalars 15 } -- -- start of Scalar MIB Objects related to State Refresh Module. -- snMspsPimSRProcessingStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION " The value indicates the whether to process and forward the state Refresh message" DEFVAL { 1 } ::= { snMspsPimScalars 16 } snMspsPimRefreshInterval OBJECT-TYPE SYNTAX Integer32 (-1 | 4..100) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used only by PIM-DM. Minus one indicates that Generation of State Refresh Message is disabled" REFERENCE "RFC 3973 section 4.8" DEFVAL { -1 } ::= { snMspsPimScalars 17 } snMspsPimSourceActiveInterval OBJECT-TYPE SYNTAX Unsigned32 (120..210) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Period of time after receiving a multicast message a Originator router (Directly connected to source) will continue to send State Refresh Message" DEFVAL { 210 } ::= { snMspsPimScalars 18 } -- End of Scalar MIB objects related to State Refresh Module -- -- Start of Scalar MIB objects related to PIM Hot-Standby Module -- snMspsPimHAAdminStatus OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-only STATUS current DESCRIPTION " High Availability feature enabled or disabled in PIM." DEFVAL { 0 } ::= { snMspsPimScalars 19 } snMspsPimHAState OBJECT-TYPE SYNTAX INTEGER { init(1), activeStandbyUp(2), activeStandbyDown(3), standby(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Internal State of the PIM instance. init(1) implies that the PIM instance is up, but is unaware of the status of its peer. activeStandbyUp(2) implies that the current PIM instance is up and functioning as active node and its peer is functioning as the standby. activeStandbyDown(3) implies that the current PIM instance is up and functioning as active node but its peer is down/not functioning. standby(4) implies that current PIM instance is the standby Instance. " DEFVAL { 1 } ::= { snMspsPimScalars 20} snMspsPimHADynamicBulkUpdStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), completed(3), aborted(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of dynamic bulk update between active and dynamic PIM instance. notStarted(1): Dynamic Bulk Update has not yet been started. inProgress(2): Dynamic Bulk Update is in Progress. completed (3): Dynamic Bulk Update is complete. aborted (4): dynamic Bulk Update is aborted." DEFVAL { 1 } ::= { snMspsPimScalars 21} snMspsPimHAForwardingTblEntryCnt OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number entries in the shadow table of active PIM instance." ::= { snMspsPimScalars 22} -- -- End of Scalar MIB objects related to PIM Hot-Standby Module -- -- -- Start of Scalar MIB objects related to PIM RPF-Vector feature -- snMspsPimIpRpfVector OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of IPv4 Multicast RPF Vector Feature." DEFVAL { 2 } ::= { snMspsPimScalars 23 } -- -- End of Scalar MIB objects related to PIM RPF Vector feature -- -- -- Start of Scalar MIB objects related to Bidir-PIM feature -- snMspsPimIpBidirPIMStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of Bidir-PIM Feature.Enabling/Disabling this feature is applicable for both PIMv4 and PIMv6" DEFVAL { 2 } ::= { snMspsPimScalars 24 } snMspsPimIpBidirOfferInterval OBJECT-TYPE SYNTAX Integer32 (1..20000000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval between the DF election Offer messages to be sent." DEFVAL { 100 } ::= { snMspsPimScalars 25 } snMspsPimIpBidirOfferLimit OBJECT-TYPE SYNTAX Integer32 (3..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of unanswered offers before the router changes as the designated forwarder (DF)" DEFVAL { 3 } ::= { snMspsPimScalars 26 } -- -- End of Scalar MIB objects related to Bidir-PIM feature -- -- -- SCALAR_TABLE_END -- -- -- The PIM Interface Table -- snMspsPimInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table." ::= { snMspsPimTables 1 } snMspsPimInterfaceEntry OBJECT-TYPE SYNTAX SnMspsPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimInterfaceTable." INDEX { snMspsPimInterfaceIfIndex , snMspsPimInterfaceAddrType} ::= { snMspsPimInterfaceTable 1 } SnMspsPimInterfaceEntry ::= SEQUENCE { snMspsPimInterfaceIfIndex Integer32, snMspsPimInterfaceAddrType InetAddressType, snMspsPimInterfaceCompId Integer32, snMspsPimInterfaceDRPriority Unsigned32, snMspsPimInterfaceHelloHoldTime Integer32, snMspsPimInterfaceLanPruneDelayPresent INTEGER, snMspsPimInterfaceLanDelay Integer32, snMspsPimInterfaceOverrideInterval Integer32, snMspsPimInterfaceGenerationId Integer32, snMspsPimInterfaceSuppressionInterval Integer32, snMspsPimInterfaceAdminStatus Integer32, snMspsPimInterfaceBorderBit Integer32, snMspsPimInterfaceGraftRetryInterval Unsigned32, snMspsPimInterfaceSRPriorityEnabled TruthValue, snMspsPimInterfaceTtl Integer32, snMspsPimInterfaceProtocol IANAipMRouteProtocol, snMspsPimInterfaceRateLimit Integer32, snMspsPimInterfaceInMcastOctets Counter32, snMspsPimInterfaceOutMcastOctets Counter32, snMspsPimInterfaceHCInMcastOctets Counter64, snMspsPimInterfaceHCOutMcastOctets Counter64, snMspsPimInterfaceCompIdList CompList, snMspsPimInterfaceDFOfferSentPkts Counter32, snMspsPimInterfaceDFOfferRcvdPkts Counter32, snMspsPimInterfaceDFWinnerSentPkts Counter32, snMspsPimInterfaceDFWinnerRcvdPkts Counter32, snMspsPimInterfaceDFBackoffSentPkts Counter32, snMspsPimInterfaceDFBackoffRcvdPkts Counter32, snMspsPimInterfaceDFPassSentPkts Counter32, snMspsPimInterfaceDFPassRcvdPkts Counter32, snMspsPimInterfaceCKSumErrorPkts Counter32, snMspsPimInterfaceInvalidTypePkts Counter32, snMspsPimInterfaceInvalidDFSubTypePkts Counter32, snMspsPimInterfaceAuthFailPkts Counter32, snMspsPimInterfaceFromNonNbrsPkts Counter32, snMspsPimInterfaceJPRcvdOnRPFPkts Counter32, snMspsPimInterfaceJPRcvdNoRPPkts Counter32, snMspsPimInterfaceJPRcvdWrongRPPkts Counter32, snMspsPimInterfaceJoinSSMGrpPkts Counter32, snMspsPimInterfaceJoinBidirGrpPkts Counter32, snMspsPimInterfaceHelloRcvdPkts Counter32, snMspsPimInterfaceHelloSentPkts Counter32, snMspsPimInterfaceJPRcvdPkts Counter32, snMspsPimInterfaceJPSentPkts Counter32, snMspsPimInterfaceAssertRcvdPkts Counter32, snMspsPimInterfaceAssertSentPkts Counter32, snMspsPimInterfaceGraftRcvdPkts Counter32, snMspsPimInterfaceGraftSentPkts Counter32, snMspsPimInterfaceGraftAckRcvdPkts Counter32, snMspsPimInterfaceGraftAckSentPkts Counter32, snMspsPimInterfacePackLenErrorPkts Counter32, snMspsPimInterfaceBadVersionPkts Counter32, snMspsPimInterfacePktsfromSelf Counter32, snMspsPimInterfaceExtBorderBit Integer32, snMspsPimInterfaceJoinSSMBadPkts Counter32 } snMspsPimInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { snMspsPimInterfaceEntry 1 } snMspsPimInterfaceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of the PIM Interface for which this entry contains information." ::= { snMspsPimInterfaceEntry 2 } snMspsPimInterfaceCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This object is the component Id of the component to which the interface belongs to" DEFVAL { 1 } ::= { snMspsPimInterfaceEntry 3 } snMspsPimInterfaceDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The DR priority value configured for Hello message for that router per interface" DEFVAL { 1 } ::= {snMspsPimInterfaceEntry 4 } snMspsPimInterfaceHelloHoldTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The hold time configured for the Hello message for that router per interface" ::= { snMspsPimInterfaceEntry 5 } snMspsPimInterfaceLanPruneDelayPresent OBJECT-TYPE SYNTAX INTEGER {disable (0), enable (1)} MAX-ACCESS read-write STATUS current DESCRIPTION "The LanPruneDelayPresent bit configured for the router per interface" DEFVAL { 0 } ::= { snMspsPimInterfaceEntry 6 } snMspsPimInterfaceLanDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The LanPruneDelayPresent bit configured for the router per interface" DEFVAL { 0 } ::= { snMspsPimInterfaceEntry 7 } snMspsPimInterfaceOverrideInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Override Interval configured for the router per interface" DEFVAL { 0 } ::= { snMspsPimInterfaceEntry 8} snMspsPimInterfaceGenerationId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding states by triggering Bootstrap and Join/Prune messages to the rebooted router" ::= { snMspsPimInterfaceEntry 9 } snMspsPimInterfaceSuppressionInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface suppression period " ::= { snMspsPimInterfaceEntry 10 } snMspsPimInterfaceAdminStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interface Administrative Status " ::= { snMspsPimInterfaceEntry 11 } snMspsPimInterfaceBorderBit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates this interface is border interface or not, 1-- border interface, 0(default value)-- Normal interface." ::= { snMspsPimInterfaceEntry 12 } snMspsPimInterfaceGraftRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 3 } ::= { snMspsPimInterfaceEntry 13 } snMspsPimInterfaceSRPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM." ::= { snMspsPimInterfaceEntry 14 } snMspsPimInterfaceTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." ::= { snMspsPimInterfaceEntry 15 } snMspsPimInterfaceProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing protocol running on this interface." ::= { snMspsPimInterfaceEntry 16} snMspsPimInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." DEFVAL { 0 } ::= { snMspsPimInterfaceEntry 17} snMspsPimInterfaceInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { snMspsPimInterfaceEntry 18} snMspsPimInterfaceOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface." ::= { snMspsPimInterfaceEntry 19} snMspsPimInterfaceHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of snMspsPimInterfaceInMcaestOctets. It is similar to ifHCInOctets in the Interfaces MIB, except that only multicast packets are counted. " ::= { snMspsPimInterfaceEntry 20} snMspsPimInterfaceHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of snMspsPimInterfaceOutMcastOctets." ::= { snMspsPimInterfaceEntry 21} snMspsPimInterfaceCompIdList OBJECT-TYPE SYNTAX CompList MAX-ACCESS read-write STATUS current DESCRIPTION " This object is the component Id List of the components which are associated with this interface" ::= { snMspsPimInterfaceEntry 22 } snMspsPimInterfaceDFOfferSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF Offer packets sent by an interface" ::= { snMspsPimInterfaceEntry 23 } snMspsPimInterfaceDFOfferRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF Offer packets received on an interface" ::= { snMspsPimInterfaceEntry 24 } snMspsPimInterfaceDFWinnerSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF winner packets sent by an interface" ::= { snMspsPimInterfaceEntry 25 } snMspsPimInterfaceDFWinnerRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF winner packets received on an interface" ::= { snMspsPimInterfaceEntry 26 } snMspsPimInterfaceDFBackoffSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF Backoff packets sent per interface" ::= { snMspsPimInterfaceEntry 27 } snMspsPimInterfaceDFBackoffRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF Backoff packets Received per interface" ::= { snMspsPimInterfaceEntry 28 } snMspsPimInterfaceDFPassSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF pass packets sent per interface" ::= { snMspsPimInterfaceEntry 29 } snMspsPimInterfaceDFPassRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of DF pass packets received on an interface" ::= { snMspsPimInterfaceEntry 30 } snMspsPimInterfaceCKSumErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received on an interface with incorrect checksum" ::= { snMspsPimInterfaceEntry 31 } snMspsPimInterfaceInvalidTypePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received on an interface with incorrect PIM packet type" ::= { snMspsPimInterfaceEntry 32 } snMspsPimInterfaceInvalidDFSubTypePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received on an interface with incorrect DF subtype" ::= { snMspsPimInterfaceEntry 33 } snMspsPimInterfaceAuthFailPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets dropped due to Authentication Failure" ::= { snMspsPimInterfaceEntry 34 } snMspsPimInterfaceFromNonNbrsPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of PIM control packets received on an interface from non-neighbors" ::= { snMspsPimInterfaceEntry 35 } snMspsPimInterfaceJPRcvdOnRPFPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of Join and Prune packets received on an RPF interface." ::= { snMspsPimInterfaceEntry 36 } snMspsPimInterfaceJPRcvdNoRPPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of (*,G) join and prune packets for which there is no RP in that specified group(G)" ::= { snMspsPimInterfaceEntry 37 } snMspsPimInterfaceJPRcvdWrongRPPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of (*,G) join and prune packets with wrong RP information in that group(G)" ::= { snMspsPimInterfaceEntry 38 } snMspsPimInterfaceJoinSSMGrpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of (S,G) join packets received on an interface whose group range is in SSM Group range" ::= { snMspsPimInterfaceEntry 39 } snMspsPimInterfaceJoinBidirGrpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of (*,G) or (S,G) join packets received on an interface whose group is configured as Bidir group" ::= { snMspsPimInterfaceEntry 40 } snMspsPimInterfaceHelloRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of hello packtes received on an interface" ::= { snMspsPimInterfaceEntry 41 } snMspsPimInterfaceHelloSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of hello packets sent by an interface" ::= { snMspsPimInterfaceEntry 42 } snMspsPimInterfaceJPRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of join/prune packets received on an interface" ::= { snMspsPimInterfaceEntry 43 } snMspsPimInterfaceJPSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of join/prune packets sent by an interface" ::= { snMspsPimInterfaceEntry 44 } snMspsPimInterfaceAssertRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of assert packets received on an interface" ::= { snMspsPimInterfaceEntry 45 } snMspsPimInterfaceAssertSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of assert packets sent by an interfcace" ::= { snMspsPimInterfaceEntry 46 } snMspsPimInterfaceGraftRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of graft packets received on an interface" ::= { snMspsPimInterfaceEntry 47 } snMspsPimInterfaceGraftSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of graft packets sent by an interface" ::= {snMspsPimInterfaceEntry 48 } snMspsPimInterfaceGraftAckRcvdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of graft ACK packets received on an interface" ::= { snMspsPimInterfaceEntry 49 } snMspsPimInterfaceGraftAckSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of graft ACK packets sent by an interface" ::= { snMspsPimInterfaceEntry 50 } snMspsPimInterfacePackLenErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets with packet length error" ::= { snMspsPimInterfaceEntry 51 } snMspsPimInterfaceBadVersionPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of bad version packets" ::= { snMspsPimInterfaceEntry 53 } snMspsPimInterfacePktsfromSelf OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets sent from the interface" ::= { snMspsPimInterfaceEntry 54 } snMspsPimInterfaceExtBorderBit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object displays the interface connected to a non-PIM Domain" ::= { snMspsPimInterfaceEntry 55 } snMspsPimInterfaceJoinSSMBadPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of join packets discarded on an interface whose group range is in SSM Group range" ::= { snMspsPimInterfaceEntry 56 } -- -- The PIM Neighbor Table -- snMspsPimNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimNeighborEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing the router's PIM neighbors. This table has been superseded by snMspsPimNeighborExtTable. This table may be used as long as two neighbors on different interfaces do not have the same IPv6 link-local address." ::= { snMspsPimTables 2 } snMspsPimNeighborEntry OBJECT-TYPE SYNTAX SnMspsPimNeighborEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) in the snMspsPimNeighborTable." INDEX { snMspsPimNeighborCompId, snMspsPimNeighborAddrType, snMspsPimNeighborAddress } ::= { snMspsPimNeighborTable 1 } SnMspsPimNeighborEntry ::= SEQUENCE { snMspsPimNeighborCompId Integer32, snMspsPimNeighborAddrType InetAddressType, snMspsPimNeighborAddress InetAddress, snMspsPimNeighborIfIndex Integer32, snMspsPimNeighborUpTime TimeTicks, snMspsPimNeighborExpiryTime TimeTicks, snMspsPimNeighborGenerationId Integer32, snMspsPimNeighborLanDelay Integer32, snMspsPimNeighborDRPriority Unsigned32, snMspsPimNeighborOverrideInterval Integer32, snMspsPimNeighborSRCapable TruthValue, snMspsPimNeighborRPFCapable TruthValue, snMspsPimNeighborBidirCapable TruthValue } snMspsPimNeighborCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " The component Id of this neighbor table " ::= { snMspsPimNeighborEntry 1 } snMspsPimNeighborAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The address Type of the PIM neighbor for which this entry contains information." ::= { snMspsPimNeighborEntry 2 } snMspsPimNeighborAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The IP address of the PIM neighbor for which this entry contains information." ::= { snMspsPimNeighborEntry 3 } snMspsPimNeighborIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { snMspsPimNeighborEntry 4 } snMspsPimNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { snMspsPimNeighborEntry 5 } snMspsPimNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The minimum time remaining before this PIM neighbor will be aged out." ::= { snMspsPimNeighborEntry 6 } snMspsPimNeighborGenerationId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding states by triggering Bootstrap and Join/Prune messages to the rebooted router" ::= { snMspsPimNeighborEntry 7 } snMspsPimNeighborLanDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The LanDelay configured for this PIM neighbor" ::= { snMspsPimNeighborEntry 8 } snMspsPimNeighborDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The DR priority value configured for this PIM neighbor" ::= { snMspsPimNeighborEntry 9 } snMspsPimNeighborOverrideInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Override Interval configured for this PIM neighbor" ::= { snMspsPimNeighborEntry 10 } snMspsPimNeighborSRCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.3.4" ::= { snMspsPimNeighborEntry 11 } snMspsPimNeighborRPFCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Evaluates to TRUE if this neighbor is RPF Vector Capable." ::= { snMspsPimNeighborEntry 12 } snMspsPimNeighborBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Evaluates to TRUE if this neighbor is Bidir-PIM Capable." ::= { snMspsPimNeighborEntry 13 } -- -- The PIM IP Multicast Route Table -- snMspsPimIpMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM multicast routing information" ::= { snMspsPimTables 3 } snMspsPimIpMRouteEntry OBJECT-TYPE SYNTAX SnMspsPimIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimIpMRouteTable. There is one entry for each incoming interface running PIM" INDEX { snMspsPimIpMRouteCompId, snMspsPimIpMRouteAddrType, snMspsPimIpMRouteGroup, snMspsPimIpMRouteSource, snMspsPimIpMRouteSourceMasklen } ::= { snMspsPimIpMRouteTable 1 } SnMspsPimIpMRouteEntry ::= SEQUENCE { snMspsPimIpMRouteCompId Integer32, snMspsPimIpMRouteAddrType InetAddressType, snMspsPimIpMRouteGroup InetAddress, snMspsPimIpMRouteSource InetAddress, snMspsPimIpMRouteSourceMasklen Integer32, snMspsPimIpMRouteUpstreamNeighbor InetAddress, snMspsPimIpMRouteInIfIndex Integer32, snMspsPimIpMRouteUpTime TimeTicks, snMspsPimIpMRoutePkts Counter32, snMspsPimIpMRouteUpstreamAssertTimer TimeTicks, snMspsPimIpMRouteAssertMetric Integer32, snMspsPimIpMRouteAssertMetricPref Integer32, snMspsPimIpMRouteAssertRPTBit TruthValue, snMspsPimIpMRouteTimerFlags Integer32, snMspsPimIpMRouteFlags Integer32, snMspsPimIpMRouteUpstreamPruneState INTEGER, snMspsPimIpMRouteUpstreamPruneLimitTimer TimeTicks, snMspsPimIpMRouteOriginatorState INTEGER, snMspsPimIpMRouteSourceActiveTimer TimeTicks, snMspsPimIpMRouteStateRefreshTimer TimeTicks, snMspsPimIpMRouteExpiryTime TimeTicks, snMspsPimIpMRouteDifferentInIfPackets Counter32, snMspsPimIpMRouteOctets Counter32, snMspsPimIpMRouteProtocol IANAipMRouteProtocol, snMspsPimIpMRouteRtProto IANAipRouteProtocol, snMspsPimIpMRouteRtAddress InetAddress, snMspsPimIpMRouteRtMasklen Integer32, snMspsPimIpMRouteRtType INTEGER, snMspsPimIpMRouteHCOctets Counter64, snMspsPimIpMRouteOIfList PortList, snMspsPimIpMRouteRPFVectorAddr InetAddress, snMspsPimIpMRoutePimMode INTEGER } snMspsPimIpMRouteCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The component Id of this table" ::= { snMspsPimIpMRouteEntry 1 } snMspsPimIpMRouteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP family in which the route belongs to." ::= { snMspsPimIpMRouteEntry 2 } snMspsPimIpMRouteGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains multicast routing information." ::= { snMspsPimIpMRouteEntry 3 } snMspsPimIpMRouteSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { snMspsPimIpMRouteEntry 4 } snMspsPimIpMRouteSourceMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information." ::= { snMspsPimIpMRouteEntry 5 } snMspsPimIpMRouteUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received." ::= { snMspsPimIpMRouteEntry 6 } snMspsPimIpMRouteInIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received." ::= { snMspsPimIpMRouteEntry 7 } snMspsPimIpMRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { snMspsPimIpMRouteEntry 8 } snMspsPimIpMRoutePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address." ::= { snMspsPimIpMRouteEntry 9 } snMspsPimIpMRouteUpstreamAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor." ::= { snMspsPimIpMRouteEntry 10 } snMspsPimIpMRouteAssertMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received." ::= { snMspsPimIpMRouteEntry 11 } snMspsPimIpMRouteAssertMetricPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect." ::= { snMspsPimIpMRouteEntry 12 } snMspsPimIpMRouteAssertRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect." ::= { snMspsPimIpMRouteEntry 13 } snMspsPimIpMRouteTimerFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes PIM-specific Timer flags related to a Multicast Route Entry. If the bit is 1 indicates that timer is started for that entry. The bits corresponding to the timers are as follows: 0 - JP Suppression Timer, 1 - Oif Timer, 2 - Entry Timer, 3 - Reg Suppression Timer, 4 - Assert Timer, 5 - RandomDelayJoin Timer. For example, If this object value is 3 (0000 0011), then it means that JPSuppression timer and Oif timer are running. This is for both SM and DM. The bits which are not applicable to DM/SM will be filled with 0 " ::= { snMspsPimIpMRouteEntry 14 } snMspsPimIpMRouteFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits." ::= { snMspsPimIpMRouteEntry 15 } snMspsPimIpMRouteUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { forwarding (1), ackpending (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.4.1" ::= { snMspsPimIpMRouteEntry 16 } snMspsPimIpMRouteUpstreamPruneLimitTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not running. This object is used only by PIM-DM." REFERENCE "RFC 2973 section 4.8" ::= { snMspsPimIpMRouteEntry 17 } snMspsPimIpMRouteOriginatorState OBJECT-TYPE SYNTAX INTEGER { notOriginator (1), originator (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.5.2" ::= { snMspsPimIpMRouteEntry 18 } snMspsPimIpMRouteSourceActiveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { snMspsPimIpMRouteEntry 19 } snMspsPimIpMRouteStateRefreshTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { snMspsPimIpMRouteEntry 20 } snMspsPimIpMRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out." ::= { snMspsPimIpMRouteEntry 21 } snMspsPimIpMRouteDifferentInIfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets which this router has received from these sources and addressed to this multicast group address, which were dropped because they were not received on the interface indicated by snMspsPimIpMRouteInIfIndex." ::= { snMspsPimIpMRouteEntry 22 } snMspsPimIpMRouteOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router." ::= { snMspsPimIpMRouteEntry 23 } snMspsPimIpMRouteProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast routing protocol via which this multicast forwarding entry was learned." ::= { snMspsPimIpMRouteEntry 24 } snMspsPimIpMRouteRtProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the upstream or parent interface for this multicast forwarding entry was learned. Inclusion of values for routing protocols is not intended to imply that those protocols need be supported." ::= { snMspsPimIpMRouteEntry 25} snMspsPimIpMRouteRtAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address portion of the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { snMspsPimIpMRouteEntry 26 } snMspsPimIpMRouteRtMasklen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mask associated with the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { snMspsPimIpMRouteEntry 27 } snMspsPimIpMRouteRtType OBJECT-TYPE SYNTAX INTEGER { unicast (1), -- Unicast route used in multicast RIB multicast (2) -- Multicast route } MAX-ACCESS read-only STATUS current DESCRIPTION "Route type" ::= { snMspsPimIpMRouteEntry 28 } snMspsPimIpMRouteHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router. This object is a 64-bit version of snMspsPimIpMRouteOctets." ::= { snMspsPimIpMRouteEntry 29 } snMspsPimIpMRouteOIfList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the Outgoing Interface List of the mroute" ::= { snMspsPimIpMRouteEntry 30 } snMspsPimIpMRouteRPFVectorAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "It shows the RPF vector Address to reach the actual destination: either RP for creating (*,G) entry, multicast Source for creating (S,G) entry.This Vector is stored from the received Join/Prune Packet." ::= { snMspsPimIpMRouteEntry 31 } snMspsPimIpMRoutePimMode OBJECT-TYPE SYNTAX INTEGER { dm (1), sm (2), ssm (3), bidir (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value shows the PIM mode of the group present in the Mroute entry" ::= { snMspsPimIpMRouteEntry 32 } -- -- The PIM Next Hop Table -- snMspsPimIpMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimIpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM information on the next hops on outgoing interfaces for forwarding multicast datagrams" ::= { snMspsPimTables 4 } snMspsPimIpMRouteNextHopEntry OBJECT-TYPE SYNTAX SnMspsPimIpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose snMspsPimIpMRouteNextHopState is pruned(1)." INDEX { snMspsPimIpMRouteNextHopCompId, snMspsPimIpMRouteNextHopAddrType, snMspsPimIpMRouteNextHopGroup, snMspsPimIpMRouteNextHopSource, snMspsPimIpMRouteNextHopSourceMasklen, snMspsPimIpMRouteNextHopIfIndex, snMspsPimIpMRouteNextHopAddress } ::= { snMspsPimIpMRouteNextHopTable 1 } SnMspsPimIpMRouteNextHopEntry ::= SEQUENCE { snMspsPimIpMRouteNextHopCompId Integer32, snMspsPimIpMRouteNextHopAddrType InetAddressType, snMspsPimIpMRouteNextHopGroup InetAddress, snMspsPimIpMRouteNextHopSource InetAddress, snMspsPimIpMRouteNextHopSourceMasklen Integer32, snMspsPimIpMRouteNextHopIfIndex Integer32, snMspsPimIpMRouteNextHopAddress InetAddress, snMspsPimIpMRouteNextHopPruneReason INTEGER, snMspsPimIpMRouteNextHopState INTEGER, snMspsPimIpMRouteNextHopUpTime TimeTicks, snMspsPimIpMRouteNextHopExpiryTime TimeTicks, snMspsPimIpMRouteNextHopProtocol IANAipMRouteProtocol, snMspsPimIpMRouteNextHopPkts Counter32 } snMspsPimIpMRouteNextHopCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The component Id for this table " ::= { snMspsPimIpMRouteNextHopEntry 1 } snMspsPimIpMRouteNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP family in which the Next hop address belongs to." ::= { snMspsPimIpMRouteNextHopEntry 2 } snMspsPimIpMRouteNextHopGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group for which this entry specifies a next-hop on an outgoing interface." ::= { snMspsPimIpMRouteNextHopEntry 3 } snMspsPimIpMRouteNextHopSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of snMspsPimIpMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { snMspsPimIpMRouteNextHopEntry 4 } snMspsPimIpMRouteNextHopSourceMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of snMspsPimIpMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface" ::= { snMspsPimIpMRouteNextHopEntry 5 } snMspsPimIpMRouteNextHopIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next-hop." ::= { snMspsPimIpMRouteNextHopEntry 6 } snMspsPimIpMRouteNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next-hop specific to this entry. For most interfaces, this is identical to snMspsPimIpMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface." ::= { snMspsPimIpMRouteNextHopEntry 7 } snMspsPimIpMRouteNextHopPruneReason OBJECT-TYPE SYNTAX INTEGER { forwarding (0), other (1), prune (2), assert (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing." ::= { snMspsPimIpMRouteNextHopEntry 8 } snMspsPimIpMRouteNextHopState OBJECT-TYPE SYNTAX INTEGER { pruned(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not." ::= { snMspsPimIpMRouteNextHopEntry 9 } snMspsPimIpMRouteNextHopUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router" ::= { snMspsPimIpMRouteNextHopEntry 10 } snMspsPimIpMRouteNextHopExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out. If ipMRouteNextHopState is pruned(1), the remaining time until the prune expires and the state reverts to forwarding(2). Otherwise, the remaining time until this entry is removed from the table. The time remaining may be copied from ipMRouteExpiryTime if the protocol in use for this entry does not specify next-hop timers. The value 0 indicates that the entry is not subject to aging." ::= { snMspsPimIpMRouteNextHopEntry 11 } snMspsPimIpMRouteNextHopProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this next-hop was learned." ::= { snMspsPimIpMRouteNextHopEntry 12 } snMspsPimIpMRouteNextHopPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which have been forwarded using this route." ::= { snMspsPimIpMRouteNextHopEntry 13 } -- -- The PIM Candidate-RP Table -- snMspsPimCandidateRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of snMspsPimStdComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of snMspsPimStdComponentCRPHoldTime is non- zero)." ::= { snMspsPimTables 6 } snMspsPimCandidateRPEntry OBJECT-TYPE SYNTAX SnMspsPimCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimCandidateRPTable." INDEX { snMspsPimCandidateRPCompId, snMspsPimCandidateRPAddrType, snMspsPimCandidateRPGroupAddress, snMspsPimCandidateRPGroupMasklen, snMspsPimCandidateRPAddress } ::= { snMspsPimCandidateRPTable 1 } SnMspsPimCandidateRPEntry ::= SEQUENCE { snMspsPimCandidateRPCompId Integer32, snMspsPimCandidateRPAddrType InetAddressType, snMspsPimCandidateRPGroupAddress InetAddress, snMspsPimCandidateRPGroupMasklen Integer32, snMspsPimCandidateRPAddress InetAddress, snMspsPimCandidateRPPriority Integer32, snMspsPimCandidateRPRowStatus RowStatus, snMspsPimCandidateRPPimMode INTEGER } snMspsPimCandidateRPCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Component Id for this table " ::= { snMspsPimCandidateRPEntry 1 } snMspsPimCandidateRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address type in which the multicast group address, and RP address belong to." ::= { snMspsPimCandidateRPEntry 2 } snMspsPimCandidateRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with snMspsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { snMspsPimCandidateRPEntry 3 } snMspsPimCandidateRPGroupMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with snMspsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { snMspsPimCandidateRPEntry 4 } snMspsPimCandidateRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (unicast) address of the interface which will be advertised as a Candidate-RP." ::= { snMspsPimCandidateRPEntry 5 } snMspsPimCandidateRPPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the interface which will be advertised as a Candidate-RP." ::= { snMspsPimCandidateRPEntry 6 } snMspsPimCandidateRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsPimCandidateRPEntry 7 } snMspsPimCandidateRPPimMode OBJECT-TYPE SYNTAX INTEGER { sm (2), bidir (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value shows the PIM mode of the group for which candidate RP is configured." ::= { snMspsPimCandidateRPEntry 8 } -- -- The PIM Static RP-Set Table -- snMspsPimStaticRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStaticRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the IP multicast groups for which the routers are available as the RP through static configuration." ::= { snMspsPimTables 7 } snMspsPimStaticRPSetEntry OBJECT-TYPE SYNTAX SnMspsPimStaticRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimStaticRPSetTable." INDEX { snMspsPimStaticRPSetCompId, snMspsPimStaticRPAddrType, snMspsPimStaticRPSetGroupAddress, snMspsPimStaticRPSetGroupMasklen} ::= { snMspsPimStaticRPSetTable 1 } SnMspsPimStaticRPSetEntry ::= SEQUENCE { snMspsPimStaticRPSetCompId Integer32, snMspsPimStaticRPAddrType InetAddressType, snMspsPimStaticRPSetGroupAddress InetAddress, snMspsPimStaticRPSetGroupMasklen Integer32, snMspsPimStaticRPAddress InetAddress, snMspsPimStaticRPRowStatus RowStatus, snMspsPimStaticRPEmbdFlag INTEGER, snMspsPimStaticRPPimMode INTEGER } snMspsPimStaticRPSetCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Component Id for this table " ::= { snMspsPimStaticRPSetEntry 1 } snMspsPimStaticRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type in which the RP address belongs to." ::= { snMspsPimStaticRPSetEntry 2 } snMspsPimStaticRPSetGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with pimStaticRPSetGroupMask, gives the group prefix for which this entry contains information about the RP." ::= { snMspsPimStaticRPSetEntry 3 } snMspsPimStaticRPSetGroupMasklen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address mask which, when combined with pimStaticRPSetGroupAddress, gives the group prefix for which this entry contains information about the RP." ::= { snMspsPimStaticRPSetEntry 4 } snMspsPimStaticRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the interface which will be static configured as the RP." ::= { snMspsPimStaticRPSetEntry 5 } snMspsPimStaticRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsPimStaticRPSetEntry 6 } snMspsPimStaticRPEmbdFlag OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the flag indicates if entry is configured for static RP or embedded-RP. disabled - entry configured for Static RP enabled - entry configured for Embedded RP." DEFVAL { 0 } ::= { snMspsPimStaticRPSetEntry 7 } snMspsPimStaticRPPimMode OBJECT-TYPE SYNTAX INTEGER { sm (2), bidir (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value shows the PIM mode of the group for which static RP is configured." ::= { snMspsPimStaticRPSetEntry 8 } -- -- snMspsPimComponentModeTable -- snMspsPimComponentModeTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimComponentModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the components modes)." ::= { snMspsPimTables 8 } snMspsPimComponentModeEntry OBJECT-TYPE SYNTAX SnMspsPimComponentModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimComponentModeTable." INDEX { snMspsPimComponentId } ::= { snMspsPimComponentModeTable 1 } SnMspsPimComponentModeEntry ::= SEQUENCE { snMspsPimComponentId Integer32, snMspsPimComponentMode INTEGER, snMspsPimCompGraftRetryCount Integer32 } snMspsPimComponentId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Component Id for this table " ::= { snMspsPimComponentModeEntry 1 } snMspsPimComponentMode OBJECT-TYPE SYNTAX INTEGER { dense (1), sparse (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode of the component. A value of 1 indicates the component is running in DM mode and value of 2 indicated that the component is running in DM mode" DEFVAL { 2 } ::= { snMspsPimComponentModeEntry 2 } snMspsPimCompGraftRetryCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The value indicates the number of retries that can be made to send the graft message" DEFVAL { 1 } ::= { snMspsPimComponentModeEntry 3 } -- Register Checksum Config Table snMspsPimRegChkSumCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimRegChkSumCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing RPs configured in CISCO Router" ::= { snMspsPimTables 9 } snMspsPimRegChkSumCfgEntry OBJECT-TYPE SYNTAX SnMspsPimRegChkSumCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimRegChkSumCfgTable." INDEX {snMspsPimRegChkSumTblCompId, snMspsPimRegChkSumTblRPAddrType, snMspsPimRegChkSumTblRPAddress} ::= { snMspsPimRegChkSumCfgTable 1 } SnMspsPimRegChkSumCfgEntry ::= SEQUENCE { snMspsPimRegChkSumTblCompId Integer32, snMspsPimRegChkSumTblRPAddrType InetAddressType, snMspsPimRegChkSumTblRPAddress InetAddress, snMspsPimRPChkSumStatus INTEGER } snMspsPimRegChkSumTblCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Component Id for this table, This configuration is valid only for a sparse mode component." ::= { snMspsPimRegChkSumCfgEntry 1 } snMspsPimRegChkSumTblRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of this entry" ::= { snMspsPimRegChkSumCfgEntry 2 } snMspsPimRegChkSumTblRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RP Address of the router to which the Register checksum should be calculated." ::= { snMspsPimRegChkSumCfgEntry 3 } snMspsPimRPChkSumStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this Row, by which new entries may be created If the RowStatus is set, then the Register Message checksum should be calculated including the data packet other wise for for any RP address not part of this table checksum should be sent as per the draft-ietf-pim-sm-new-v2" ::= { snMspsPimRegChkSumCfgEntry 4 } -- -- The BIDIR-PIM DF Table -- snMspsPimDFTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimDFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table shows the Elected RP for the IP multicast group" ::= { snMspsPimTables 10 } snMspsPimDFEntry OBJECT-TYPE SYNTAX SnMspsPimDFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimDFTable." INDEX { snMspsPimDFIfAddrType, snMspsPimDFElectedRP, snMspsPimDFIfIndex } ::= { snMspsPimDFTable 1 } SnMspsPimDFEntry ::= SEQUENCE { snMspsPimDFIfAddrType InetAddressType, snMspsPimDFElectedRP InetAddress, snMspsPimDFIfIndex Integer32, snMspsPimDFState INTEGER, snMspsPimDFWinnerAddr InetAddress, snMspsPimDFWinnerUptime TimeTicks, snMspsPimDFElectionStateTimer TimeTicks, snMspsPimDFWinnerMetric Unsigned32, snMspsPimDFWinnerMetricPref Unsigned32, snMspsPimDFMessageCount Integer32 } snMspsPimDFIfAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP family for which DF state to be retrieved." ::= { snMspsPimDFEntry 1 } snMspsPimDFElectedRP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (unicast) address of the Elected RP for which the DF state of the interface to be retrieved." ::= { snMspsPimDFEntry 2 } snMspsPimDFIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which the DF state to be retrieved." ::= { snMspsPimDFEntry 3 } snMspsPimDFState OBJECT-TYPE SYNTAX INTEGER { offer (1), winner (2), backoff (3), lose (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The DF state on the PIM interface for the Elected RP." ::= { snMspsPimDFEntry 4 } snMspsPimDFWinnerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (Link-Local) address of the DFWinner(the PIM neighbor) for the Elected RP in the PIM interface" ::= { snMspsPimDFEntry 5 } snMspsPimDFWinnerUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this DF Winner got elected." ::= { snMspsPimDFEntry 6 } snMspsPimDFElectionStateTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timer for DF election state, on the expiry of this timer the existing DF state gets expired and changes to the appropriate state. If the timer is not running, then the existing state is permanent, till the occurence of next event." ::= { snMspsPimDFEntry 7 } snMspsPimDFWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The winner metric advertised by the DF winner or zero if there is no DF exist" ::= { snMspsPimDFEntry 8 } snMspsPimDFWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The winner metric preference advertised by the DF winner or zero if there is no DF exist" ::= { snMspsPimDFEntry 9 } snMspsPimDFMessageCount OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The DF election Message Count(MC) for the DF state of RPA (I)" ::= { snMspsPimDFEntry 10 } -- -- The PIM Elected-RP Table -- snMspsPimElectedRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimElectedRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table shows the Elected RP for the IP multicast group" ::= { snMspsPimTables 11 } snMspsPimElectedRPEntry OBJECT-TYPE SYNTAX SnMspsPimElectedRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimElectedRPTable." INDEX { snMspsPimElectedRPCompId, snMspsPimElectedRPAddrType, snMspsPimElectedRPGroupAddress, snMspsPimElectedRPGroupMasklen } ::= { snMspsPimElectedRPTable 1 } SnMspsPimElectedRPEntry ::= SEQUENCE { snMspsPimElectedRPCompId Integer32, snMspsPimElectedRPAddrType InetAddressType, snMspsPimElectedRPGroupAddress InetAddress, snMspsPimElectedRPGroupMasklen Integer32, snMspsPimElectedRPAddress InetAddress, snMspsPimElectedRPPriority Integer32, snMspsPimElectedRPHoldTime Integer32, snMspsPimElectedRPUpTime Integer32 } snMspsPimElectedRPCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Component Id for this table " ::= { snMspsPimElectedRPEntry 1 } snMspsPimElectedRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address type in which the multicast group address, and RP address belong to." ::= { snMspsPimElectedRPEntry 2 } snMspsPimElectedRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which the Elected RP to be identified." ::= { snMspsPimElectedRPEntry 3 } snMspsPimElectedRPGroupMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with snMspsPimElectedRPGroupMask, identifies a group prefix for which Elected-RP to be identified." ::= { snMspsPimElectedRPEntry 4 } snMspsPimElectedRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (unicast) address of the interface which is Elected as RP for the IP multicast Group address." ::= { snMspsPimElectedRPEntry 5 } snMspsPimElectedRPPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the interface which is Elected as an RP for the IP multicast group address." ::= { snMspsPimElectedRPEntry 6 } snMspsPimElectedRPHoldTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The HoldTime of the Elected RP for the IP multicast group address." ::= { snMspsPimElectedRPEntry 7 } snMspsPimElectedRPUpTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the up time of the Elected RP for the IP multicast group address." ::= { snMspsPimElectedRPEntry 8 } -- -- The PIM Extended Neighbor Table -- snMspsPimNeighborExtTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimNeighborExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The extended (conceptual) table listing the router's PIM Neighbors. This table differs from snMspsPimNeighborTable as it has snMspsPimNeighborExtIfIndex as an index instead of the Component ID. This is because in IPv6, two neighbors on different interfaces can have the same link-local address. A Component ID List is added as an interface can be associated with multiple components." ::= { snMspsPimTables 12 } snMspsPimNeighborExtEntry OBJECT-TYPE SYNTAX SnMspsPimNeighborExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimNeighborExtTable." INDEX { snMspsPimNeighborExtIfIndex, snMspsPimNeighborExtAddrType, snMspsPimNeighborExtAddress } ::= { snMspsPimNeighborExtTable 1 } SnMspsPimNeighborExtEntry ::= SEQUENCE { snMspsPimNeighborExtIfIndex Integer32, snMspsPimNeighborExtAddrType InetAddressType, snMspsPimNeighborExtAddress InetAddress, snMspsPimNeighborExtCompIdList CompList, snMspsPimNeighborExtUpTime TimeTicks, snMspsPimNeighborExtExpiryTime TimeTicks, snMspsPimNeighborExtGenerationId Integer32, snMspsPimNeighborExtLanDelay Integer32, snMspsPimNeighborExtDRPriority Unsigned32, snMspsPimNeighborExtOverrideInterval Integer32, snMspsPimNeighborExtSRCapable TruthValue, snMspsPimNeighborExtRPFCapable TruthValue, snMspsPimNeighborExtBidirCapable TruthValue } snMspsPimNeighborExtIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM Neighbor." ::= { snMspsPimNeighborExtEntry 1 } snMspsPimNeighborExtAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address Type of the PIM Neighbor for which this entry contains information." ::= { snMspsPimNeighborExtEntry 2 } snMspsPimNeighborExtAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the PIM Neighbor for which this entry contains information." ::= { snMspsPimNeighborExtEntry 3 } snMspsPimNeighborExtCompIdList OBJECT-TYPE SYNTAX CompList MAX-ACCESS read-only STATUS current DESCRIPTION " The components associated with the interface on which the PIM neighbor for this entry is found." ::= { snMspsPimNeighborExtEntry 4 } snMspsPimNeighborExtUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM Neighbor (last) became a Neighbor of the local router." ::= { snMspsPimNeighborExtEntry 5 } snMspsPimNeighborExtExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM Neighbor will be aged out." ::= { snMspsPimNeighborExtEntry 6 } snMspsPimNeighborExtGenerationId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding states by triggering Bootstrap and Join/Prune messages to the rebooted router" ::= { snMspsPimNeighborExtEntry 7 } snMspsPimNeighborExtLanDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LanDelay configured for this PIM Neighbor" ::= { snMspsPimNeighborExtEntry 8 } snMspsPimNeighborExtDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The DR priority value configured for this PIM Neighbor" ::= { snMspsPimNeighborExtEntry 9 } snMspsPimNeighborExtOverrideInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Override Interval configured for this PIM Neighbor" ::= { snMspsPimNeighborExtEntry 10 } snMspsPimNeighborExtSRCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this Neighbor is using the State Refresh Capable option. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.3.4" ::= { snMspsPimNeighborExtEntry 11 } snMspsPimNeighborExtRPFCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this Neighbor is RPF Vector Capable." ::= { snMspsPimNeighborExtEntry 12 } snMspsPimNeighborExtBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this Neighbor is Bidir-PIM Capable." ::= { snMspsPimNeighborExtEntry 13 } -- ---------------- -- TRAP MIB BEGIN -- ---------------- snMspsHARtrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The MIB object snMspsHARtrId,is the configured Router-Id for the router.This ID is obtained from IP module" ::= { snMspsPimTrapsControl 1 } snMspsPimHAEvent OBJECT-TYPE SYNTAX INTEGER { standbyInstanceUP(1), standbyInstanceDown(2), instancesSwitchover(3), dynamicBulkupdateStart(4), dynamicBulkupdateComplete(5), dynamicBulkupdateAborted(6) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Trap Events: StandbyInstanceUP: generated when the Active PIM instance detects Standby instance becoming Up. StandbyInstanceDown: generated when the Active PIM instance detects Standby instance going Down. InstancesSwitchover: generated When both the Active and Standby PIM instances change their roles and transits to Standby and Active state respectively. DynamicBulkupdateStart: generated when the Active PIM instance starts sending dynamic Bulk updates to the Standby instance. DynamicBulkupdateComplete: genreated when the Active PIM instance receives an event from Standby PIM instance indicating Completion of Bulk Update. DynamicBulkupdateAborted: generated when Bulk Update is aborted." ::= { snMspsPimTrapsControl 3 } snMspsPimHAEventTrap NOTIFICATION-TYPE OBJECTS { snMspsHARtrId, snMspsPimHAEvent } STATUS deprecated DESCRIPTION "A notification is sent to the management entity whenever there is a state change in the PIM hotstandby Module." ::= { snMspsPimTraps 1 } snMspsPimBidirEventTrap NOTIFICATION-TYPE OBJECTS { snMspsHARtrId, snMspsPimNeighborAddress, snMspsPimNeighborIfIndex } STATUS deprecated DESCRIPTION "A notification is sent to the management entity whenever a Bidirectional mode enabled router receives a Hello Msg from a Bidirectional disabled router, in a rate limited manner." ::= { snMspsPimTraps 2 } -- ----------------- -- TRAP MIB END -- ----------------- -- -- The PIM IP Multicast Route Table for Bidir -- snMspsPimIpGenMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimIpGenMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table list the PIM multicast routing information in Bidir Mode" ::= { snMspsPimTables 13 } snMspsPimIpGenMRouteEntry OBJECT-TYPE SYNTAX SnMspsPimIpGenMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry (conceptual row) in the snMspsPimIpGenMRouteTable. One entry is listed for incoming interface on which PIM is enabled" INDEX { snMspsPimIpGenMRouteCompId, snMspsPimIpGenMRouteAddrType, snMspsPimIpGenMRouteGroup, snMspsPimIpGenMRouteGroupMasklen, snMspsPimIpGenMRouteSource, snMspsPimIpGenMRouteSourceMasklen} ::= { snMspsPimIpGenMRouteTable 1 } SnMspsPimIpGenMRouteEntry ::= SEQUENCE { snMspsPimIpGenMRouteCompId Integer32, snMspsPimIpGenMRouteAddrType InetAddressType, snMspsPimIpGenMRouteGroup InetAddress, snMspsPimIpGenMRouteGroupMasklen Integer32, snMspsPimIpGenMRouteSource InetAddress, snMspsPimIpGenMRouteSourceMasklen Integer32, snMspsPimIpGenMRouteUpstreamNeighbor InetAddress, snMspsPimIpGenMRouteInIfIndex Integer32, snMspsPimIpGenMRouteUpTime TimeTicks, snMspsPimIpGenMRoutePkts Counter32, snMspsPimIpGenMRouteUpstreamAssertTimer TimeTicks, snMspsPimIpGenMRouteAssertMetric Integer32, snMspsPimIpGenMRouteAssertMetricPref Integer32, snMspsPimIpGenMRouteAssertRPTBit TruthValue, snMspsPimIpGenMRouteTimerFlags Integer32, snMspsPimIpGenMRouteFlags Integer32, snMspsPimIpGenMRouteUpstreamPruneState INTEGER, snMspsPimIpGenMRouteUpstreamPruneLimitTimer TimeTicks, snMspsPimIpGenMRouteOriginatorState INTEGER, snMspsPimIpGenMRouteSourceActiveTimer TimeTicks, snMspsPimIpGenMRouteStateRefreshTimer TimeTicks, snMspsPimIpGenMRouteExpiryTime TimeTicks, snMspsPimIpGenMRouteDifferentInIfPackets Counter32, snMspsPimIpGenMRouteOctets Counter32, snMspsPimIpGenMRouteProtocol IANAipMRouteProtocol, snMspsPimIpGenMRouteRtProto IANAipRouteProtocol, snMspsPimIpGenMRouteRtAddress InetAddress, snMspsPimIpGenMRouteRtMasklen Integer32, snMspsPimIpGenMRouteRtType INTEGER, snMspsPimIpGenMRouteHCOctets Counter64, snMspsPimIpGenMRouteOIfList PortList, snMspsPimIpGenMRouteRPFVectorAddr InetAddress, snMspsPimIpGenMRoutePimMode INTEGER, snMspsPimIpGenMRouteType INTEGER, snMspsPimIpGenMRouteNPStatus INTEGER } snMspsPimIpGenMRouteCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the component Id of snMspsPimIpGenMRouteTable" ::= { snMspsPimIpGenMRouteEntry 1 } snMspsPimIpGenMRouteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the The IP family on which the route is present" ::= { snMspsPimIpGenMRouteEntry 2 } snMspsPimIpGenMRouteGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the The IP multicast group address for which the specified entry contain multicast routing information" ::= { snMspsPimIpGenMRouteEntry 3 } snMspsPimIpGenMRouteGroupMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object displays the network mask, when combined with the corresponding value of ipMRouteGroup identifies the groups for which the entry contains multicast routing information" ::= { snMspsPimIpGenMRouteEntry 4 } snMspsPimIpGenMRouteSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the network address when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which the entry contains multicast routing information" ::= { snMspsPimIpGenMRouteEntry 5 } snMspsPimIpGenMRouteSourceMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the network mask when combined with the corresponding value of ipMRouteSource identifies the sources for which the entry contains multicast routing information" ::= { snMspsPimIpGenMRouteEntry 6 } snMspsPimIpGenMRouteUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the address of the upstream neighbor" ::= { snMspsPimIpGenMRouteEntry 7 } snMspsPimIpGenMRouteInIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the interface index value on which IP packets are sent to the multicast group address" ::= { snMspsPimIpGenMRouteEntry 8 } snMspsPimIpGenMRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the time between the multicast routing information learnt by the router" ::= { snMspsPimIpGenMRouteEntry 9 } snMspsPimIpGenMRoutePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets the router has received by the multicast group address" ::= { snMspsPimIpGenMRouteEntry 10 } snMspsPimIpGenMRouteUpstreamAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the assert timer value which is the time remaining between the router changing its upstream neighbor back to RPF neighbor. This is set only when PIM mode is set to either Sparse and or Dense mode. 0 indicates that no upstream neighbor has changed to RPF neighbor" ::= { snMspsPimIpGenMRouteEntry 11 } snMspsPimIpGenMRouteAssertMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the metric advertised by the assert winner on the upstream interface, or 0 if no assert is received." ::= { snMspsPimIpGenMRouteEntry 12 } snMspsPimIpGenMRouteAssertMetricPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the preference advertised by the assert winner on the upstream interface, or 0 if no assert is in effect." ::= { snMspsPimIpGenMRouteEntry 13 } snMspsPimIpGenMRouteAssertRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays RPT-bit value advertised by the assert winner on the upstream interface, else false is displayed" ::= { snMspsPimIpGenMRouteEntry 14 } snMspsPimIpGenMRouteTimerFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the PIM-specific timer flags related to a Multicast Route Entry. If the bit is 1, it indicates that timer is started for the specific entry. The bits corresponding to the timers are as follows: 0 - JP Suppression Timer, 1 - Oif Timer, 2 - Entry Timer, 3 - Reg Suppression Timer, 4 - Assert Timer, 5 - RandomDelayJoin Timer. For example, If the value is 3 (0000 0011), then it means that JPSuppression timer and Oif timer are running. This is for both sparse and dense mode. The bits which are not applicable to DM/SM will be displayed with 0" ::= { snMspsPimIpGenMRouteEntry 15 } snMspsPimIpGenMRouteFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the PIM-specific flags related to a multicast state entry" ::= { snMspsPimIpGenMRouteEntry 16 } snMspsPimIpGenMRouteUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { forwarding (1), ackpending (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays whether the local router has pruned itself from the PIM dense tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only when PIM mode is set to dense mode." REFERENCE "RFC 3973 section 4.4.1" ::= { snMspsPimIpGenMRouteEntry 17 } snMspsPimIpGenMRouteUpstreamPruneLimitTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the time till the local router sends a (S,G) prune message on pimSGRPFIfIndex. Zero is displayed if the timer is not running." REFERENCE "RFC 2973 section 4.8" ::= { snMspsPimIpGenMRouteEntry 18 } snMspsPimIpGenMRouteOriginatorState OBJECT-TYPE SYNTAX INTEGER { notOriginator (1), originator (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays whether the router is the source for the (S,G) message flow. This object is used only when PIM mode is set to dense mode" REFERENCE "RFC 3973 section 4.5.2" ::= { snMspsPimIpGenMRouteEntry 19 } snMspsPimIpGenMRouteSourceActiveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is displayed as 'originator', the active timer is the time period between the local router changes to notOriginator state. Otherwise, this is zero. This object is used only when PIM mode is set to Dense mode" REFERENCE "RFC 3973 section 4.8" ::= { snMspsPimIpGenMRouteEntry 20 } snMspsPimIpGenMRouteStateRefreshTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is displayed as 'originator', then the state refresh timer is the time taken to send a State Refresh message. This object is used only when PIM mode is set to Dense mode" REFERENCE "RFC 3973 section 4.8" ::= { snMspsPimIpGenMRouteEntry 21 } snMspsPimIpGenMRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays whether minimum amount of time before this entry will is timed out" ::= { snMspsPimIpGenMRouteEntry 22 } snMspsPimIpGenMRouteDifferentInIfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This object displays the number of packets which this router has received from the multicast source and addressed to this multicast group address, which were dropped as they were not received on the interface specified by the snMspsPimIpGenMRouteInIfIndex" ::= { snMspsPimIpGenMRouteEntry 23 } snMspsPimIpGenMRouteOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This object displays the number of octets contained in IP packets which were received from the multicast sources and destined to this multicast group address" ::= { snMspsPimIpGenMRouteEntry 24 } snMspsPimIpGenMRouteProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the multicast routing protocol through which this multicast forwarding entry is learned" ::= { snMspsPimIpGenMRouteEntry 25 } snMspsPimIpGenMRouteRtProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the routing mechanism through which the route used to find the upstream or parent interface for this multicast forwarding entry is learned" ::= { snMspsPimIpGenMRouteEntry 26} snMspsPimIpGenMRouteRtAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the address portion of the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { snMspsPimIpGenMRouteEntry 27 } snMspsPimIpGenMRouteRtMasklen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the The mask associated with the route which is used to find the upstream or parent interface for this multicast forwarding entry" ::= { snMspsPimIpGenMRouteEntry 28 } snMspsPimIpGenMRouteRtType OBJECT-TYPE SYNTAX INTEGER { unicast (1), -- Unicast route used in multicast RIB multicast (2) -- Multicast route } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the multicast route type." ::= { snMspsPimIpGenMRouteEntry 29 } snMspsPimIpGenMRouteHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of octets present in the IP packets which were received from multicast sources and addressed to this multicast group address. This object is a 64-bit version of snMspsPimIpGenMRouteOctets" ::= { snMspsPimIpGenMRouteEntry 30 } snMspsPimIpGenMRouteOIfList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the outgoing interface list of the mroute" ::= { snMspsPimIpGenMRouteEntry 31 } snMspsPimIpGenMRouteRPFVectorAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the RPF vector address to reach the actual destination: either RP for creating (*,G) entry or , multicast Source for creating (S,G) entry. This vector address is obtained from the received join/prune packet" ::= { snMspsPimIpGenMRouteEntry 32 } snMspsPimIpGenMRoutePimMode OBJECT-TYPE SYNTAX INTEGER { dm (1), sm (2), ssm (3), bidir (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the PIM mode of the group present in the Mroute entry" ::= { snMspsPimIpGenMRouteEntry 33 } snMspsPimIpGenMRouteType OBJECT-TYPE SYNTAX INTEGER { sg(1), sgrpt(2), starg(4), ssrp(8), default(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the route type for the group.This could be S,G or *,G or *,*,RP." ::= { snMspsPimIpGenMRouteEntry 34 } snMspsPimIpGenMRouteNPStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the NP status of the mroute entry." ::= { snMspsPimIpGenMRouteEntry 35} -- -- The PIM Gen Next Hop Table -- snMspsPimIpGenMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimIpGenMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the PIM information on the next hops on outgoing interfaces for forwarding multicast packets" ::= { snMspsPimTables 14 } snMspsPimIpGenMRouteNextHopEntry OBJECT-TYPE SYNTAX SnMspsPimIpGenMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry in the in the snMspsPimIpGenMRouteNextHopTable. There is an entry in the ipMRouteNextHopTable with interface is running in PIM and snMspsPimIpGenMRouteNextHopState is pruned(1)" INDEX { snMspsPimIpGenMRouteNextHopCompId, snMspsPimIpGenMRouteNextHopAddrType, snMspsPimIpGenMRouteNextHopGroup, snMspsPimIpGenMRouteNextHopGroupMasklen, snMspsPimIpGenMRouteNextHopSource, snMspsPimIpGenMRouteNextHopSourceMasklen, snMspsPimIpGenMRouteNextHopIfIndex, snMspsPimIpGenMRouteNextHopAddress} ::= { snMspsPimIpGenMRouteNextHopTable 1 } SnMspsPimIpGenMRouteNextHopEntry ::= SEQUENCE { snMspsPimIpGenMRouteNextHopCompId Integer32, snMspsPimIpGenMRouteNextHopAddrType InetAddressType, snMspsPimIpGenMRouteNextHopGroup InetAddress, snMspsPimIpGenMRouteNextHopGroupMasklen Integer32, snMspsPimIpGenMRouteNextHopSource InetAddress, snMspsPimIpGenMRouteNextHopSourceMasklen Integer32, snMspsPimIpGenMRouteNextHopIfIndex Integer32, snMspsPimIpGenMRouteNextHopAddress InetAddress, snMspsPimIpGenMRouteNextHopPruneReason INTEGER, snMspsPimIpGenMRouteNextHopState INTEGER, snMspsPimIpGenMRouteNextHopUpTime TimeTicks, snMspsPimIpGenMRouteNextHopExpiryTime TimeTicks, snMspsPimIpGenMRouteNextHopProtocol IANAipMRouteProtocol, snMspsPimIpGenMRouteNextHopPkts Counter32, snMspsPimIpGenMRouteNextHopNPStatus INTEGER } snMspsPimIpGenMRouteNextHopCompId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object displays the component Id in the next-hop table " ::= { snMspsPimIpGenMRouteNextHopEntry 1 } snMspsPimIpGenMRouteNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the IP family of theNext hop address ." ::= { snMspsPimIpGenMRouteNextHopEntry 2 } snMspsPimIpGenMRouteNextHopGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the next-hop on an outgoing interface for the IP multicast group " ::= { snMspsPimIpGenMRouteNextHopEntry 3 } snMspsPimIpGenMRouteNextHopGroupMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the network mask length of the multicast group present in the next hop table" ::= { snMspsPimIpGenMRouteNextHopEntry 4 } snMspsPimIpGenMRouteNextHopSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the network source address present in the next hop table" ::= { snMspsPimIpGenMRouteNextHopEntry 5 } snMspsPimIpGenMRouteNextHopSourceMasklen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the network mask length of the multicast source present in the next hop table" ::= { snMspsPimIpGenMRouteNextHopEntry 6 } snMspsPimIpGenMRouteNextHopIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the interface index present in the next hop table" ::= { snMspsPimIpGenMRouteNextHopEntry 7 } snMspsPimIpGenMRouteNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object displays the address of the next-hop specific to this entry . For most interfaces, this is identical to snMspsPimIpGenMRouteNextHopGroup but for . NBMA interfaces may have multiple next-hop addresses for an outgoing interface" ::= { snMspsPimIpGenMRouteNextHopEntry 8 } snMspsPimIpGenMRouteNextHopPruneReason OBJECT-TYPE SYNTAX INTEGER { forwarding (0), other (1), prune (2), assert (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the reason why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing" ::= { snMspsPimIpGenMRouteNextHopEntry 9 } snMspsPimIpGenMRouteNextHopState OBJECT-TYPE SYNTAX INTEGER { pruned(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP packets. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not used" ::= { snMspsPimIpGenMRouteNextHopEntry 10 } snMspsPimIpGenMRouteNextHopUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the time since the multicast routing information learned by the router for the corresponding entry" ::= { snMspsPimIpGenMRouteNextHopEntry 11 } snMspsPimIpGenMRouteNextHopExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the minimum amount of time remaining for this entry to be timed out. The calculation of expiry time varies as follows; 1. If ipMRouteNextHopState is set pruned(1), the remaining time until till the prune expires and the state reverts to forwarding(2). 2. Otherwise, the remaining time until this entry is removed from the table. The time remaining may be copied from ipMRouteExpiryTime if the protocol in use for this entry does not specify next-hop timers. The value 0 indicates that the entry is not subject to aging" ::= { snMspsPimIpGenMRouteNextHopEntry 12 } snMspsPimIpGenMRouteNextHopProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the routing mechanism through which this next-hop is learned" ::= { snMspsPimIpGenMRouteNextHopEntry 13 } snMspsPimIpGenMRouteNextHopPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets which are forwarded using this route" ::= { snMspsPimIpGenMRouteNextHopEntry 14 } snMspsPimIpGenMRouteNextHopNPStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the NP programming status of the next hop interface" ::= { snMspsPimIpGenMRouteNextHopEntry 15 } -- Start of PRIVATE MIB implementation of standard PIM MIB for supporting -- both PIMv4 and PIMv6 snMspsPimStdJoinPruneInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default interval at which periodic PIM-SM Join/Prune messages are to be sent." ::= { snMspsPimStdScalars 1 } -- The PIM Interface Table snMspsPimStdInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table." ::= { snMspsPimStdTables 1 } snMspsPimStdInterfaceEntry OBJECT-TYPE SYNTAX SnMspsPimStdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimInterfaceTable." INDEX { snMspsPimStdInterfaceIfIndex, snMspsPimStdInterfaceAddrType} ::= { snMspsPimStdInterfaceTable 1 } SnMspsPimStdInterfaceEntry ::= SEQUENCE { snMspsPimStdInterfaceIfIndex Integer32, snMspsPimStdInterfaceAddrType InetAddressType, snMspsPimStdInterfaceAddress InetAddress, snMspsPimStdInterfaceNetMaskLen Integer32, snMspsPimStdInterfaceMode INTEGER, snMspsPimStdInterfaceDR InetAddress, snMspsPimStdInterfaceHelloInterval Integer32, snMspsPimStdInterfaceStatus RowStatus, snMspsPimStdInterfaceJoinPruneInterval Integer32, snMspsPimStdInterfaceCBSRPreference Integer32 } snMspsPimStdInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { snMspsPimStdInterfaceEntry 1 } snMspsPimStdInterfaceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of the PIM Interface for which this entry contains information." ::= { snMspsPimStdInterfaceEntry 2 } snMspsPimStdInterfaceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the PIM interface." ::= { snMspsPimStdInterfaceEntry 3 } snMspsPimStdInterfaceNetMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask for the IP address of the PIM interface." ::= { snMspsPimStdInterfaceEntry 4 } snMspsPimStdInterfaceMode OBJECT-TYPE SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1." DEFVAL { dense } ::= { snMspsPimStdInterfaceEntry 5 } snMspsPimStdInterfaceDR OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0." ::= { snMspsPimStdInterfaceEntry 6 } snMspsPimStdInterfaceHelloInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Hello messages are transmitted on this interface." DEFVAL { 30 } ::= { snMspsPimStdInterfaceEntry 7 } snMspsPimStdInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface." ::= { snMspsPimStdInterfaceEntry 8 } snMspsPimStdInterfaceJoinPruneInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval." ::= { snMspsPimStdInterfaceEntry 9 } snMspsPimStdInterfaceCBSRPreference OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface." DEFVAL { 0 } ::= { snMspsPimStdInterfaceEntry 10 } -- The PIM Neighbor Table snMspsPimStdNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM neighbors." ::= { snMspsPimStdTables 2 } snMspsPimStdNeighborEntry OBJECT-TYPE SYNTAX SnMspsPimStdNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimNeighborTable." INDEX { snMspsPimStdNeighborAddrType, snMspsPimStdNeighborAddress } ::= { snMspsPimStdNeighborTable 1 } SnMspsPimStdNeighborEntry ::= SEQUENCE { snMspsPimStdNeighborAddrType InetAddressType, snMspsPimStdNeighborAddress InetAddress, snMspsPimStdNeighborIfIndex Integer32, snMspsPimStdNeighborUpTime TimeTicks, snMspsPimStdNeighborExpiryTime TimeTicks, snMspsPimStdNeighborMode INTEGER } snMspsPimStdNeighborAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address Type of the PIM neighbor for which this entry contains information." ::= { snMspsPimStdNeighborEntry 1 } snMspsPimStdNeighborAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the PIM neighbor for which this entry contains information." ::= { snMspsPimStdNeighborEntry 2 } snMspsPimStdNeighborIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { snMspsPimStdNeighborEntry 3 } snMspsPimStdNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { snMspsPimStdNeighborEntry 4 } snMspsPimStdNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM neighbor will be aged out." ::= { snMspsPimStdNeighborEntry 5 } snMspsPimStdNeighborMode OBJECT-TYPE SYNTAX INTEGER { dense(1), sparse(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface." ::= { snMspsPimStdNeighborEntry 6 } -- -- The PIM IP Multicast Route Table -- snMspsPimStdIpMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB." ::= { snMspsPimStdTables 3 } snMspsPimStdIpMRouteEntry OBJECT-TYPE SYNTAX SnMspsPimStdIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimIpMRouteTable. There is one entry per entry in the ipMRouteTable whose incoming interface is running PIM." INDEX { snMspsPimStdIpMRouteAddrType, snMspsPimStdIpMRouteGroup, snMspsPimStdIpMRouteSource, snMspsPimStdIpMRouteSourceMaskLen } ::= { snMspsPimStdIpMRouteTable 1 } SnMspsPimStdIpMRouteEntry ::= SEQUENCE { snMspsPimStdIpMRouteAddrType InetAddressType, snMspsPimStdIpMRouteGroup InetAddress, snMspsPimStdIpMRouteSource InetAddress, snMspsPimStdIpMRouteSourceMaskLen Integer32, snMspsPimStdIpMRouteUpstreamAssertTimer TimeTicks, snMspsPimStdIpMRouteAssertMetric Integer32, snMspsPimStdIpMRouteAssertMetricPref Integer32, snMspsPimStdIpMRouteAssertRPTBit TruthValue, snMspsPimStdIpMRouteFlags BITS } snMspsPimStdIpMRouteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP family in which the route belongs to." ::= { snMspsPimStdIpMRouteEntry 2 } snMspsPimStdIpMRouteGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains multicast routing information." ::= { snMspsPimStdIpMRouteEntry 3 } snMspsPimStdIpMRouteSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { snMspsPimStdIpMRouteEntry 4 } snMspsPimStdIpMRouteSourceMaskLen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information." ::= { snMspsPimStdIpMRouteEntry 5 } snMspsPimStdIpMRouteUpstreamAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor." ::= { snMspsPimStdIpMRouteEntry 6 } snMspsPimStdIpMRouteAssertMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received." ::= { snMspsPimStdIpMRouteEntry 7 } snMspsPimStdIpMRouteAssertMetricPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect." ::= { snMspsPimStdIpMRouteEntry 8 } snMspsPimStdIpMRouteAssertRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect." ::= { snMspsPimStdIpMRouteEntry 9 } snMspsPimStdIpMRouteFlags OBJECT-TYPE SYNTAX BITS { rpt(0), spt(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits." ::= { snMspsPimStdIpMRouteEntry 10 } -- -- The PIM Next Hop Table -- snMspsPimStdIpMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdIpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteNextHopTable defined in the IP Multicast MIB." ::= { snMspsPimStdTables 4 } snMspsPimStdIpMRouteNextHopEntry OBJECT-TYPE SYNTAX SnMspsPimStdIpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose ipMRouteNextHopState is pruned(1)." INDEX { snMspsPimStdIpMRouteNextHopAddrType, snMspsPimStdIpMRouteNextHopGroup, snMspsPimStdIpMRouteNextHopSource, snMspsPimStdIpMRouteNextHopSourceMaskLen, snMspsPimStdIpMRouteNextHopIfIndex, snMspsPimStdIpMRouteNextHopAddress } ::= { snMspsPimStdIpMRouteNextHopTable 1 } SnMspsPimStdIpMRouteNextHopEntry ::= SEQUENCE { snMspsPimStdIpMRouteNextHopAddrType InetAddressType, snMspsPimStdIpMRouteNextHopGroup InetAddress, snMspsPimStdIpMRouteNextHopSource InetAddress, snMspsPimStdIpMRouteNextHopSourceMaskLen Integer32, snMspsPimStdIpMRouteNextHopIfIndex Integer32, snMspsPimStdIpMRouteNextHopAddress InetAddress, snMspsPimStdIpMRouteNextHopPruneReason INTEGER } snMspsPimStdIpMRouteNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP family in which the Next hop address belongs to." ::= { snMspsPimStdIpMRouteNextHopEntry 2 } snMspsPimStdIpMRouteNextHopGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group for which this entry specifies a next-hop on an outgoing interface." ::= { snMspsPimStdIpMRouteNextHopEntry 3 } snMspsPimStdIpMRouteNextHopSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of snMspsPimCmnIpMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { snMspsPimStdIpMRouteNextHopEntry 4 } snMspsPimStdIpMRouteNextHopSourceMaskLen OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of snMspsPimCmnIpMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface" ::= { snMspsPimStdIpMRouteNextHopEntry 5 } snMspsPimStdIpMRouteNextHopIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next-hop." ::= { snMspsPimStdIpMRouteNextHopEntry 6 } snMspsPimStdIpMRouteNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next-hop specific to this entry. For most interfaces, this is identical to snMspsPimCmnIpMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface." ::= { snMspsPimStdIpMRouteNextHopEntry 7 } snMspsPimStdIpMRouteNextHopPruneReason OBJECT-TYPE SYNTAX INTEGER { other (1), prune (2), assert (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing." ::= { snMspsPimStdIpMRouteNextHopEntry 8 } -- The PIM RP Table snMspsPimStdRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdRPEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for IP multicast groups. This table is deprecated since its function is replaced by the pimRPSetTable for PIM version 2." ::= { snMspsPimStdTables 5 } snMspsPimStdRPEntry OBJECT-TYPE SYNTAX SnMspsPimStdRPEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) in the pimRPTable. There is one entry per RP address for each IP multicast group." INDEX { snMspsPimStdRPAddrType, snMspsPimStdRPGroupAddress, snMspsPimStdRPAddress } ::= { snMspsPimStdRPTable 1 } SnMspsPimStdRPEntry ::= SEQUENCE { snMspsPimStdRPAddrType InetAddressType, snMspsPimStdRPGroupAddress InetAddress, snMspsPimStdRPAddress InetAddress, snMspsPimStdRPState INTEGER, snMspsPimStdRPStateTimer TimeTicks, snMspsPimStdRPLastChange TimeTicks, snMspsPimStdRPRowStatus RowStatus } snMspsPimStdRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address type in which the multicast group address, and RP address belong to." ::= { snMspsPimStdRPEntry 1 } snMspsPimStdRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The IP multicast group address for which this entry contains information about an RP." ::= { snMspsPimStdRPEntry 2 } snMspsPimStdRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The unicast address of the RP." ::= { snMspsPimStdRPEntry 3 } snMspsPimStdRPState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of the RP." ::= { snMspsPimStdRPEntry 4 } snMspsPimStdRPStateTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The minimum time remaining before the next state change. When pimRPState is up, this is the minimum time which must expire until it can be declared down. When pimRPState is down, this is the time until it will be declared up (in order to retry)." ::= { snMspsPimStdRPEntry 5 } snMspsPimStdRPLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of sysUpTime at the time when the corresponding instance of pimRPState last changed its value." ::= { snMspsPimStdRPEntry 6 } snMspsPimStdRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsPimStdRPEntry 7 } -- The PIM RP-Set Table snMspsPimStdRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages." ::= { snMspsPimStdTables 6 } snMspsPimStdRPSetEntry OBJECT-TYPE SYNTAX SnMspsPimStdRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimRPSetTable." INDEX { snMspsPimStdRPSetComponent, snMspsPimStdRPSetAddrType, snMspsPimStdRPSetGroupAddress, snMspsPimStdRPSetGroupMaskLen, snMspsPimStdRPSetAddress } ::= { snMspsPimStdRPSetTable 1 } SnMspsPimStdRPSetEntry ::= SEQUENCE { snMspsPimStdRPSetAddrType InetAddressType, snMspsPimStdRPSetGroupAddress InetAddress, snMspsPimStdRPSetGroupMaskLen Integer32, snMspsPimStdRPSetAddress InetAddress, snMspsPimStdRPSetHoldTime Integer32, snMspsPimStdRPSetExpiryTime TimeTicks, snMspsPimStdRPSetComponent Integer32, snMspsPimStdRPSetPimMode INTEGER } snMspsPimStdRPSetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type in which the RP address belongs to." ::= { snMspsPimStdRPSetEntry 1 } snMspsPimStdRPSetGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP." ::= { snMspsPimStdRPSetEntry 2 } snMspsPimStdRPSetGroupMaskLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP." ::= { snMspsPimStdRPSetEntry 3 } snMspsPimStdRPSetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the Candidate-RP." ::= { snMspsPimStdRPSetEntry 4 } snMspsPimStdRPSetHoldTime OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0." ::= { snMspsPimStdRPSetEntry 5 } snMspsPimStdRPSetExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0." ::= { snMspsPimStdRPSetEntry 6 } snMspsPimStdRPSetComponent OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value." ::= { snMspsPimStdRPSetEntry 7 } snMspsPimStdRPSetPimMode OBJECT-TYPE SYNTAX INTEGER { dm (1), sm (2), ssm (3), bidir (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value shows the PIM mode in the RP set entry" ::= { snMspsPimStdRPSetEntry 11 } -- -- Note: { pim 8 } through { pim 10 } were used in older versions -- of this MIB. Since some earlier versions of this MIB have been -- widely-deployed, these values must not be used in the future, -- as long the MIB is rooted under { experimental 61 }. -- -- The PIM Candidate-RP Table snMspsPimStdCandidateRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of snMspsPimStdComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of snMspsPimStdComponentCRPHoldTime is non- zero)." ::= { snMspsPimStdTables 7 } snMspsPimStdCandidateRPEntry OBJECT-TYPE SYNTAX SnMspsPimStdCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimCandidateRPTable." INDEX { snMspsPimStdCandidateRPAddrType, snMspsPimStdCandidateRPGroupAddress, snMspsPimStdCandidateRPGroupMaskLen } ::= { snMspsPimStdCandidateRPTable 1 } SnMspsPimStdCandidateRPEntry ::= SEQUENCE { snMspsPimStdCandidateRPAddrType InetAddressType, snMspsPimStdCandidateRPGroupAddress InetAddress, snMspsPimStdCandidateRPGroupMaskLen Integer32, snMspsPimStdCandidateRPAddress InetAddress, snMspsPimStdCandidateRPRowStatus RowStatus } snMspsPimStdCandidateRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address type in which the multicast group address, and RP address belong to." ::= { snMspsPimStdCandidateRPEntry 1 } snMspsPimStdCandidateRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { snMspsPimStdCandidateRPEntry 2 } snMspsPimStdCandidateRPGroupMaskLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { snMspsPimStdCandidateRPEntry 3 } snMspsPimStdCandidateRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The (unicast) address of the interface which will be advertised as a Candidate-RP." ::= { snMspsPimStdCandidateRPEntry 4 } snMspsPimStdCandidateRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsPimStdCandidateRPEntry 5 } -- The PIM Component Table snMspsPimStdComponentTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM-SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them." ::= { snMspsPimStdTables 8 } snMspsPimStdComponentEntry OBJECT-TYPE SYNTAX SnMspsPimStdComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimComponentTable." INDEX { snMspsPimStdComponentIndex } ::= { snMspsPimStdComponentTable 1 } SnMspsPimStdComponentEntry ::= SEQUENCE { snMspsPimStdComponentIndex Integer32, snMspsPimStdComponentBSRExpiryTime TimeTicks, snMspsPimStdComponentCRPHoldTime Integer32, snMspsPimStdComponentStatus RowStatus, snMspsPimStdComponentScopeZoneName DisplayString } snMspsPimStdComponentIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a pimComponentIndex value of 1." ::= { snMspsPimStdComponentEntry 1 } snMspsPimStdComponentBSRExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message from a lower candidate BSR." ::= { snMspsPimStdComponentEntry 2 } snMspsPimStdComponentCRPHoldTime OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP." DEFVAL { 0 } ::= { snMspsPimStdComponentEntry 3 } snMspsPimStdComponentStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance." ::= { snMspsPimStdComponentEntry 4 } snMspsPimStdComponentScopeZoneName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates the scope-zone associated with a particular component" ::= { snMspsPimStdComponentEntry 5 } snMspsPimStdComponentBSRTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdComponentBSREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM-SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them." ::= { snMspsPimStdTables 9 } snMspsPimStdComponentBSREntry OBJECT-TYPE SYNTAX SnMspsPimStdComponentBSREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimComponentTable." INDEX { snMspsPimStdComponentBSRIndex, snMspsPimStdComponentBSRAddrType} ::= { snMspsPimStdComponentBSRTable 1 } SnMspsPimStdComponentBSREntry ::= SEQUENCE { snMspsPimStdComponentBSRIndex Integer32, snMspsPimStdComponentBSRAddrType InetAddressType, snMspsPimStdComponentBSRAddress InetAddress } snMspsPimStdComponentBSRIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying the component." ::= { snMspsPimStdComponentBSREntry 1 } snMspsPimStdComponentBSRAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the bootstrap router (BSR) for the local PIM region." ::= { snMspsPimStdComponentBSREntry 2 } snMspsPimStdComponentBSRAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the bootstrap router (BSR) for the local PIM region." ::= { snMspsPimStdComponentBSREntry 3 } -- -- The PIM Neighbor Secondary Address Table -- snMspsPimStdNbrSecAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPimStdNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above)." REFERENCE "RFC 4601 section 4.3.4" ::= { snMspsPimStdTables 10 } snMspsPimStdNbrSecAddressEntry OBJECT-TYPE SYNTAX SnMspsPimStdNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snMspsPimStdNbrSecAddressTable." INDEX { snMspsPimStdNbrSecAddressIfIndex, snMspsPimStdNbrSecAddressType, snMspsPimStdNbrSecAddressPrimary, snMspsPimStdNbrSecAddress } ::= { snMspsPimStdNbrSecAddressTable 1 } SnMspsPimStdNbrSecAddressEntry ::= SEQUENCE { snMspsPimStdNbrSecAddressIfIndex InterfaceIndex, snMspsPimStdNbrSecAddressType InetAddressType, snMspsPimStdNbrSecAddressPrimary InetAddress, snMspsPimStdNbrSecAddress InetAddress } snMspsPimStdNbrSecAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { snMspsPimStdNbrSecAddressEntry 1 } snMspsPimStdNbrSecAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { snMspsPimStdNbrSecAddressEntry 2 } snMspsPimStdNbrSecAddressPrimary OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the snMspsPimStdNbrSecAddressType object." ::= { snMspsPimStdNbrSecAddressEntry 3 } snMspsPimStdNbrSecAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary IP address of this PIM neighbor. The InetAddressType is given by the snMspsPimStdNbrSecAddressType object." ::= { snMspsPimStdNbrSecAddressEntry 4 } -- End of PRIVATE MIB implementation of standard PIM MIB for supporting -- both PIMv4 and PIMv6 snMspsMsdp OBJECT IDENTIFIER ::= { snMspsMsdpMIB 1 } snMspsMsdpStat OBJECT IDENTIFIER ::= { snMspsMsdpMIB 2 } snMspsMsdpTraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in MSDP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Trace Disable, 1 - Management, 2 - Entry trace, 3 - Exit trace, 4 - Failure trace, 5 - All resources except buffer, 6 - Buffer, 7 - Input module trace, 8 - Output module trace, 9 - Peer module trace, 10 - cache module trace The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsMsdp 1 } snMspsMsdpIPv4AdminStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of IPv4 MSDP on this MSDP speaker- globally enabled or disabled. By default MSDP for IPv4 is disabled" DEFVAL { 0 } ::= { snMspsMsdp 2 } snMspsMsdpIPv6AdminStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of IPv6 MSDP on this MSDP speaker - globally enabled or disabled. By default MSDP for IPv6 is disabled" DEFVAL { 0 } ::= { snMspsMsdp 3 } snMspsMsdpCacheLifetime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "The lifetime given to SA cache entries when created or refreshed. This is the [SG-State-Period] in the MSDP spec. A value of 0 means no SA caching is done by this MSDP speaker. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of snMspsMsdpSACacheExpiryTime immediately after receiving an SA message applying to that row.) As such, TimeInterval would be a more appropriate SYNTAX; it remains TimeTicks for backwards compatibility." REFERENCE "RFC 3618 section 5.3" DEFVAL { 0 } ::= { snMspsMsdp 4 } snMspsMsdpNumSACacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of entries in the SA Cache table of MSDP." ::= { snMspsMsdp 5 } snMspsMsdpMaxPeerSessions OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "It defines the Maximum number of MSDP Peer sessions (TCP sessions) that would be allowed simultaneously." DEFVAL { 32 } ::= { snMspsMsdp 6 } snMspsMsdpMappingComponentId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the MRP(PIM) component on which the MSDP should work. ie. Whenever the (*,G) Join is received in the configured PIM compoment and MSDP is enabled, SA cache entry will be searched in MSDP to get the Source Address" DEFVAL { 1 } ::= { snMspsMsdp 7 } snMspsMsdpListenerPort OBJECT-TYPE SYNTAX Integer32 (639 |1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "MSDP listens on this port for the TCP connection between the remote peers. This port change will be effective for the forthcoming connections, however the old Peers with old TCP Port will be supported till the Peer goes down" DEFVAL { 639 } ::= { snMspsMsdp 8 } snMspsMsdpPeerFilter OBJECT-TYPE SYNTAX INTEGER { acceptall (1), denyall (0) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the status of peer filter globally configured. This can be Accept all peers or Deny all Peers. If the status is acceptall, all the Peer connections are accepted if no route map is configured in PEER FILTER TABLE. If the routemap is configured, the action taken based on the routemap rule." DEFVAL { 1 } ::= { snMspsMsdp 9 } snMspsMsdpPeerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of configured Peers." ::= { snMspsMsdp 10 } snMspsMsdpStatEstPeerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of established Peers." ::= { snMspsMsdpStat 1 } ------------ -- SCALAR_TABLE_END snMspsMsdp ------------ -- -- The MSDP Peer table -- snMspsMsdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the MSDP speaker's peers. This table is common for IPv4 and IPv6 Peers" ::= { snMspsMsdp 11 } snMspsMsdpPeerEntry OBJECT-TYPE SYNTAX SnMspsMsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an MSDP peer." INDEX { snMspsMsdpPeerAddrType, snMspsMsdpPeerRemoteAddress } ::= { snMspsMsdpPeerTable 1 } SnMspsMsdpPeerEntry ::= SEQUENCE { snMspsMsdpPeerAddrType InetAddressType, snMspsMsdpPeerRemoteAddress InetAddress, snMspsMsdpPeerState INTEGER, snMspsMsdpPeerRPFFailures Counter32, snMspsMsdpPeerInSAs Counter32, snMspsMsdpPeerOutSAs Counter32, snMspsMsdpPeerInSARequests Counter32, snMspsMsdpPeerOutSARequests Counter32, snMspsMsdpPeerInControlMessages Counter32, snMspsMsdpPeerOutControlMessages Counter32, snMspsMsdpPeerInDataPackets Counter32, snMspsMsdpPeerOutDataPackets Counter32, snMspsMsdpPeerFsmEstablishedTransitions Counter32, snMspsMsdpPeerFsmEstablishedTime TimeStamp, snMspsMsdpPeerInMessageTime TimeStamp, snMspsMsdpPeerLocalAddress InetAddress, snMspsMsdpPeerConnectRetryInterval Integer32, snMspsMsdpPeerHoldTimeConfigured Integer32, snMspsMsdpPeerKeepAliveConfigured Integer32, snMspsMsdpPeerDataTtl Integer32, snMspsMsdpPeerStatus RowStatus, snMspsMsdpPeerRemotePort Integer32, snMspsMsdpPeerLocalPort Integer32, snMspsMsdpPeerEncapsulationType INTEGER, snMspsMsdpPeerConnectionAttempts Counter32, snMspsMsdpPeerDiscontinuityTime TimeStamp, snMspsMsdpPeerMD5AuthPassword DisplayString, snMspsMsdpPeerMD5AuthPwdStat INTEGER, snMspsMsdpPeerMD5FailCount Integer32, snMspsMsdpPeerMD5SuccessCount Integer32, snMspsMsdpPeerInSAResponses Counter32, snMspsMsdpPeerOutSAResponses Counter32, snMspsMsdpPeerUpTime TimeTicks, snMspsMsdpPeerInKeepAliveCount Counter32, snMspsMsdpPeerOutKeepAliveCount Counter32, snMspsMsdpPeerDataTtlErrorCount Counter32, snMspsMsdpPeerAdminStatus INTEGER } snMspsMsdpPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpPeerEntry 1 } snMspsMsdpPeerRemoteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the remote MSDP peer." ::= { snMspsMsdpPeerEntry 2 } snMspsMsdpPeerState OBJECT-TYPE SYNTAX INTEGER { inactive(1), listen(2), connecting(3), established(4), disabled(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the MSDP TCP connection with this peer." ::= { snMspsMsdpPeerEntry 3 } snMspsMsdpPeerRPFFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SA messages received from this peer that failed the Peer-RPF check. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 4 } snMspsMsdpPeerInSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 5 } snMspsMsdpPeerOutSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 6 } snMspsMsdpPeerInSARequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Request messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 7 } snMspsMsdpPeerOutSARequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Request messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 8 } snMspsMsdpPeerInControlMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MSDP messages, excluding encapsulated data packets, received on this TCP connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 9 } snMspsMsdpPeerOutControlMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MSDP messages, excluding encapsulated data packets, transmitted on this TCP connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 10 } snMspsMsdpPeerInDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of encapsulated data packets received from this peer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 11 } snMspsMsdpPeerOutDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of encapsulated data packets sent to this peer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 12 } snMspsMsdpPeerFsmEstablishedTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the MSDP FSM transitioned into the ESTABLISHED state." REFERENCE "RFC 3618 section 11" ::= { snMspsMsdpPeerEntry 13 } snMspsMsdpPeerFsmEstablishedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This timestamp is set to the value of sysUpTime when a peer transitions into or out of the ESTABLISHED state. It is set to zero when the MSDP speaker is booted." REFERENCE "RFC 3618 section 11" ::= { snMspsMsdpPeerEntry 14 } snMspsMsdpPeerInMessageTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime value when the last MSDP message was received from the peer. It is set to zero when the MSDP speaker is booted." ::= { snMspsMsdpPeerEntry 15 } snMspsMsdpPeerLocalAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The local IP address used for this entry's MSDP TCP connection." ::= { snMspsMsdpPeerEntry 16 } snMspsMsdpPeerConnectRetryInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [ConnectRetry-period] for this peer." REFERENCE "RFC 3618 section 5.6" DEFVAL { 30 } ::= { snMspsMsdpPeerEntry 17 } snMspsMsdpPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Integer32 (0|3..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), the MSDP connection is never torn down due to the absence of messages from the peer." REFERENCE "RFC 3618 section 5.4" DEFVAL { 75 } ::= { snMspsMsdpPeerEntry 18 } snMspsMsdpPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Integer32 (0|1..21845) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the MSDP connection has been established." REFERENCE "RFC 3618 section 5.5" DEFVAL { 60 } ::= { snMspsMsdpPeerEntry 19 } snMspsMsdpPeerDataTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer." DEFVAL { 1 } ::= { snMspsMsdpPeerEntry 20 } snMspsMsdpPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. snMspsMsdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the snMspsMsdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { snMspsMsdpPeerEntry 21 } snMspsMsdpPeerRemotePort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote port for the TCP connection between the MSDP peers." DEFVAL { 639 } ::= { snMspsMsdpPeerEntry 22 } snMspsMsdpPeerLocalPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local port for the TCP connection between the MSDP peers." DEFVAL { 639 } ::= { snMspsMsdpPeerEntry 23 } snMspsMsdpPeerEncapsulationType OBJECT-TYPE SYNTAX INTEGER { none(0), tcp(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation in use when encapsulating data in SA messages to this peer." ::= { snMspsMsdpPeerEntry 24 } snMspsMsdpPeerConnectionAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the state machine has transitioned from INACTIVE to CONNECTING." ::= { snMspsMsdpPeerEntry 25 } snMspsMsdpPeerDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this entry's counters suffered a discontinuity. See the DESCRIPTION of each object to see if it is expected to have discontinuities. These discontinuities may occur at peer connection establishment. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value." ::= { snMspsMsdpPeerEntry 26 } snMspsMsdpPeerMD5AuthPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP MD5 Authentication Password that has to be sent with all TCP packets originated from the peer." ::= { snMspsMsdpPeerEntry 27 } snMspsMsdpPeerMD5AuthPwdStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates whether TCP MD5 password needs to be enabled/disabled for the peer." DEFVAL { disabled } ::= { snMspsMsdpPeerEntry 28 } snMspsMsdpPeerMD5FailCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of times the MD5 authentication has failed" ::= { snMspsMsdpPeerEntry 29 } snMspsMsdpPeerMD5SuccessCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of times the MD5 authentication has succeeded" ::= { snMspsMsdpPeerEntry 30 } snMspsMsdpPeerInSAResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Response messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 31 } snMspsMsdpPeerOutSAResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Response messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 32 } snMspsMsdpPeerUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was first placed in the Peer Table. The first epoch is the time that the entry was first placed in the Peer table, and the second epoch is the current time." ::= { snMspsMsdpPeerEntry 33 } snMspsMsdpPeerInKeepAliveCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP KeepAlive messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 34 } snMspsMsdpPeerOutKeepAliveCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP KeepAlive messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 35 } snMspsMsdpPeerDataTtlErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP data Packets dropped as received TTL is invalid for this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of snMspsMsdpPeerDiscontinuityTime." ::= { snMspsMsdpPeerEntry 36 } snMspsMsdpPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { established(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The is the admin state of the MSDP peer." ::= { snMspsMsdpPeerEntry 37 } -- -- The MSDP Source-Active Cache table -- snMspsMsdpSACacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpSACacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the MSDP SA advertisements currently in the MSDP speaker's cache." ::= { snMspsMsdp 12 } snMspsMsdpSACacheEntry OBJECT-TYPE SYNTAX SnMspsMsdpSACacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an MSDP SA advertisement. The Index to this table includes snMspsMsdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally, a Group and Source pair would be unique. Row creation is not permitted; snMspsMsdpSACacheStatus may only be used to delete rows from this table." INDEX { snMspsMsdpSACacheAddrType,snMspsMsdpSACacheGroupAddr, snMspsMsdpSACacheSourceAddr,snMspsMsdpSACacheOriginRP } ::= { snMspsMsdpSACacheTable 1 } SnMspsMsdpSACacheEntry ::= SEQUENCE { snMspsMsdpSACacheAddrType InetAddressType, snMspsMsdpSACacheGroupAddr InetAddress, snMspsMsdpSACacheSourceAddr InetAddress, snMspsMsdpSACacheOriginRP InetAddress, snMspsMsdpSACachePeerLearnedFrom InetAddress, snMspsMsdpSACacheRPFPeer InetAddress, snMspsMsdpSACacheInSAs Counter32, snMspsMsdpSACacheInDataPackets Counter32, snMspsMsdpSACacheUpTime TimeTicks, snMspsMsdpSACacheExpiryTime TimeTicks, snMspsMsdpSACacheStatus RowStatus } snMspsMsdpSACacheAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpSACacheEntry 1 } snMspsMsdpSACacheGroupAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address of the SA Cache entry." ::= { snMspsMsdpSACacheEntry 2 } snMspsMsdpSACacheSourceAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address of the SA Cache entry." ::= { snMspsMsdpSACacheEntry 3 } snMspsMsdpSACacheOriginRP OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RP of the SA Cache entry. This field is in the index in order to catch multiple RP's advertising the same source and group." ::= { snMspsMsdpSACacheEntry 4 } snMspsMsdpSACachePeerLearnedFrom OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer from which this SA Cache entry was last accepted. This address must correspond to the snMspsMsdpPeerRemoteAddress value for a row in the MSDP Peer Table. This should be all zeros on the router that originated the entry." ::= { snMspsMsdpSACacheEntry 5 } snMspsMsdpSACacheRPFPeer OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer from which an SA message corresponding to this cache entry would be accepted (i.e., the RPF peer for snMspsMsdpSACacheOriginRP). This may be different than snMspsMsdpSACachePeerLearnedFrom if this entry was created by an MSDP SA-Response. This address must correspond to the snMspsMsdpPeerRemoteAddress value for a row in the MSDP Peer Table, or it may be all zeros if no RPF peer exists." ::= { snMspsMsdpSACacheEntry 6 } snMspsMsdpSACacheInSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages received relevant to this cache entry. This object must be initialized to zero when creating a cache entry." ::= { snMspsMsdpSACacheEntry 7 } snMspsMsdpSACacheInDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP-encapsulated data packets received relevant to this cache entry. This object must be initialized to zero when creating a cache entry." ::= { snMspsMsdpSACacheEntry 8 } snMspsMsdpSACacheUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was first placed in the SA cache. The first epoch is the time that the entry was first placed in the SA cache, and the second epoch is the current time." ::= { snMspsMsdpSACacheEntry 9 } snMspsMsdpSACacheExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before this entry will expire from the SA cache. The first epoch is now, and the second epoch is the time that the entry will expire." ::= { snMspsMsdpSACacheEntry 10 } snMspsMsdpSACacheStatus OBJECT-TYPE SYNTAX RowStatus { active(1), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row in the table. The only allowable actions are to retrieve the status, which will be 'active', or to set the status to 'destroy' in order to remove this entry from the cache. Row creation is not permitted. No columnar objects are writable, so there are none that may be changed while the status value is active(1)." ::= { snMspsMsdpSACacheEntry 11 } -- -- MSDP Mesh Group Membership table -- snMspsMsdpMeshGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpMeshGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing MSDP Mesh Group configuration." ::= { snMspsMsdp 13 } snMspsMsdpMeshGroupEntry OBJECT-TYPE SYNTAX SnMspsMsdpMeshGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a peer in an MSDP Mesh Group. If row creation is supported, dynamically added rows are added to the system's stable configuration (corresponding to a StorageType value of nonVolatile)." INDEX { snMspsMsdpMeshGroupName,snMspsMsdpMeshGroupAddrType, snMspsMsdpMeshGroupPeerAddress } ::= { snMspsMsdpMeshGroupTable 1 } SnMspsMsdpMeshGroupEntry ::= SEQUENCE { snMspsMsdpMeshGroupName DisplayString, snMspsMsdpMeshGroupAddrType InetAddressType, snMspsMsdpMeshGroupPeerAddress InetAddress, snMspsMsdpMeshGroupStatus RowStatus } snMspsMsdpMeshGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the mesh group." ::= { snMspsMsdpMeshGroupEntry 1 } snMspsMsdpMeshGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpMeshGroupEntry 2 } snMspsMsdpMeshGroupPeerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A peer address that is a member of the mesh group with name snMspsMsdpMeshGroupName. The snMspsMsdpMeshGroupPeerAddress must match a row in the snMspsMsdpPeerTable." ::= { snMspsMsdpMeshGroupEntry 3 } snMspsMsdpMeshGroupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This entry's status, by which new entries may be added to the table and old entries deleted. snMspsMsdpMeshGroupName and snMspsMsdpMeshGroupPeerAddress must be set to valid values before the row can be activated. Since these are the table's INDEX, a row can be activated by simply setting the snMspsMsdpMeshGroupStatus variable. It is not possible to modify other columns in the same conceptual row when the status value is active(1), because the only other objects in the row are part of the index. Changing one of these changes the row, so an old row must be deleted and a new one created." ::= { snMspsMsdpMeshGroupEntry 4 } -- -- MSDP RP Table -- snMspsMsdpRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing MSDP RP Address configurations. This address is used MSDP SA messages as a Initiator RP." ::= { snMspsMsdp 14 } snMspsMsdpRPEntry OBJECT-TYPE SYNTAX SnMspsMsdpRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing the RP Address to be used in SA messages." INDEX { snMspsMsdpRPAddrType } ::= { snMspsMsdpRPTable 1 } SnMspsMsdpRPEntry ::= SEQUENCE { snMspsMsdpRPAddrType InetAddressType, snMspsMsdpRPAddress InetAddress, snMspsMsdpRPOperStatus INTEGER, snMspsMsdpRPStatus RowStatus } snMspsMsdpRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpRPEntry 1 } snMspsMsdpRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "RP Address which will be present in the SA message sent from this router." ::= { snMspsMsdpRPEntry 2 } snMspsMsdpRPOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the interface oper status." ::= { snMspsMsdpRPEntry 3 } snMspsMsdpRPStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the status of the (conceptual Row). The only possible activity is making the row active. This row cannot be destroyed ever." ::= { snMspsMsdpRPEntry 4 } -- -- MSDP Peer Filter Table -- snMspsMsdpPeerFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpPeerFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing MSDP Peer filtering configurations. The Peer connections can be accepted or denied based on this filter configuration." ::= { snMspsMsdp 15 } snMspsMsdpPeerFilterEntry OBJECT-TYPE SYNTAX SnMspsMsdpPeerFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing the filter Accept/Reject connection) applied to an MSDP Remote peer." INDEX { snMspsMsdpPeerFilterAddrType } ::= { snMspsMsdpPeerFilterTable 1 } SnMspsMsdpPeerFilterEntry ::= SEQUENCE { snMspsMsdpPeerFilterAddrType InetAddressType, snMspsMsdpPeerFilterRouteMap DisplayString, snMspsMsdpPeerFilterStatus RowStatus } snMspsMsdpPeerFilterAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpPeerFilterEntry 1 } snMspsMsdpPeerFilterRouteMap OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the route map which is to be applied for filtering the peer. Before configuring this table, a route map with this string should be configured with proper permissions (accept/deny)" ::= { snMspsMsdpPeerFilterEntry 2 } snMspsMsdpPeerFilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the status of the configured routemap This can be enabled or disabled. If status is enabled, the filter will be applied for the peers using the routemap configured, else the routemap is not used" ::= { snMspsMsdpPeerFilterEntry 3 } -- -- MSDP SA Redistribution Table -- snMspsMsdpSARedistributionTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMsdpSARedistributionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing MSDP SA filtering configurations. " ::= { snMspsMsdp 16 } snMspsMsdpSARedistributionEntry OBJECT-TYPE SYNTAX SnMspsMsdpSARedistributionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing the filter applied to either Source or Group or any of the combinations of Source and Group for preventing the SA message advertisement from the originating RP." INDEX { snMspsMsdpSARedistributionAddrType } ::= { snMspsMsdpSARedistributionTable 1 } SnMspsMsdpSARedistributionEntry ::= SEQUENCE { snMspsMsdpSARedistributionAddrType InetAddressType, snMspsMsdpSARedistributionStatus RowStatus, snMspsMsdpSARedistributionRouteMap DisplayString, snMspsMsdpSARedistributionRouteMapStat INTEGER } snMspsMsdpSARedistributionAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type for which this entry contains information." ::= { snMspsMsdpSARedistributionEntry 1 } snMspsMsdpSARedistributionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the redistribution status of the SA messages . If it is enabled and the value of snMspsMsdpSARedistributionRouteMap is NULL, then all SA messages are redistributed by the originator. Else if it is enabled and the value of snMspsMsdpSARedistributionRouteMap is NOT NULL,then SA message redistribution is based on the routemap snMspsMsdpSARedistributionRouteMap configured. If it is disabled ,no SA messages are redistributed." ::= { snMspsMsdpSARedistributionEntry 2 } snMspsMsdpSARedistributionRouteMap OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the route map which is to be applied for filtering the SA messages at originating RP. Before configuring this field, a route map with this string should be configured with proper permissions" ::= { snMspsMsdpSARedistributionEntry 3 } snMspsMsdpSARedistributionRouteMapStat OBJECT-TYPE SYNTAX INTEGER{ disabled (0), enabled (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the status of the configured routemap - enabled or disabled. If status is enabled,the filter will be applied for the SA messages using the routemap configured, else does nothing" DEFVAL { 0 } ::= { snMspsMsdpSARedistributionEntry 4 } ---- -- Traps ---- snMspsMsdpRtrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The MIB object snMspsMsdpRtrId,is the configured Router-Id for the router.This ID is obtained from IP module" ::= { snMspsMsdp 17 } snMspsMsdpTraps OBJECT IDENTIFIER ::= { snMspsMsdp 0 } snMspsMsdpEstablished NOTIFICATION-TYPE OBJECTS { snMspsMsdpRtrId, snMspsMsdpPeerFsmEstablishedTransitions } STATUS deprecated DESCRIPTION "The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state." ::= { snMspsMsdpTraps 1 } snMspsMsdpBackwardTransition NOTIFICATION-TYPE OBJECTS { snMspsMsdpRtrId, snMspsMsdpPeerState } STATUS deprecated DESCRIPTION "The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state." ::= { snMspsMsdpTraps 2 } snMspsMsdpRPOperStatusChange NOTIFICATION-TYPE OBJECTS { snMspsMsdpRtrId, snMspsMsdpRPOperStatus } STATUS deprecated DESCRIPTION "The snMspsMsdpRPOperStatus Event is generated when the MSDP RP's Oper Status changes from one state to other." ::= { snMspsMsdpTraps 3 } snMspsMgmd OBJECT IDENTIFIER ::= { snMspsMgmdMIB 1 } snMspsMgmdIgmpGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the IGMP protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables IGMP on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'." DEFVAL { disabled } ::= { snMspsMgmd 1 } snMspsMgmdIgmpTraceLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Management, 1 - Data Path, 2 - Control Plane, 3 - Rx, 4 - Tx, 5 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsMgmd 2 } snMspsMgmdIgmpDebugLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows:0 - I/o, 1 - Group, 2 - Query, 3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer, 8 - Management,9 - Entry, 10 - Exit. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Debug statements related to Group and Query will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsMgmd 3 } snMspsMgmdMldGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'." DEFVAL { disabled } ::= { snMspsMgmd 4 } snMspsMgmdMldTraceLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Data Path, 1 - Control Plane, 2 - Rx, 3 - Tx, 4 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsMgmd 5 } snMspsMgmdMldDebugLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to enable Debug Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Debug. The bits represents the levels as follows:0 - I/o, 1 - Group, 2 - Query, 3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer, 8 - Entry, 9 - Exit. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Debug statements related to Group and Query will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { snMspsMgmd 6 } snMspsMgmdGlobalLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the total number of multicast groups can be allowed.This support is for IGMPv1, IGMPv2 IGMPv3 only" ::= { snMspsMgmd 7 } snMspsMgmdGlobalCurGrpCount OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current count of groups that were added. If this reaches to snMspsMgmdGlobalLimit no membership reports will be honored for any interface." ::= { snMspsMgmd 8 } -- SCALAR_TABLE_END snMspsMgmd -- ************************************************ -- MGMD INTERFACE TABLE -- ************************************************ snMspsMgmdInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMgmdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the MGMD Statistic information for all the ports in the system." ::= { snMspsMgmd 9 } snMspsMgmdInterfaceEntry OBJECT-TYPE SYNTAX SnMspsMgmdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary information of MGMD statistics on a logical interface." INDEX { snMspsMgmdInterfaceIfIndex, snMspsMgmdInterfaceAddrType } ::= { snMspsMgmdInterfaceTable 1 } SnMspsMgmdInterfaceEntry ::= SEQUENCE { snMspsMgmdInterfaceIfIndex InterfaceIndex, snMspsMgmdInterfaceAddrType InetAddressType, snMspsMgmdInterfaceAdminStatus INTEGER, snMspsMgmdInterfaceFastLeaveStatus INTEGER, snMspsMgmdInterfaceOperStatus INTEGER, snMspsMgmdInterfaceIncomingPkts Counter32, snMspsMgmdInterfaceIncomingJoins Counter32, snMspsMgmdInterfaceIncomingLeaves Counter32, snMspsMgmdInterfaceIncomingQueries Counter32, snMspsMgmdInterfaceOutgoingQueries Counter32, snMspsMgmdInterfaceRxGenQueries Counter32, snMspsMgmdInterfaceRxGrpQueries Counter32, snMspsMgmdInterfaceRxGrpAndSrcQueries Counter32, snMspsMgmdInterfaceRxIgmpv1v2Reports Counter32, snMspsMgmdInterfaceRxIgmpv3Reports Counter32, snMspsMgmdInterfaceRxMldv1Reports Counter32, snMspsMgmdInterfaceRxMldv2Reports Counter32, snMspsMgmdInterfaceTxGenQueries Counter32, snMspsMgmdInterfaceTxGrpQueries Counter32, snMspsMgmdInterfaceTxGrpAndSrcQueries Counter32, snMspsMgmdInterfaceTxIgmpv1v2Reports Counter32, snMspsMgmdInterfaceTxIgmpv3Reports Counter32, snMspsMgmdInterfaceTxMldv1Reports Counter32, snMspsMgmdInterfaceTxMldv2Reports Counter32, snMspsMgmdInterfaceTxLeaves Counter32, snMspsMgmdInterfaceChannelTrackStatus INTEGER, snMspsMgmdInterfaceGroupListId Unsigned32, snMspsMgmdInterfaceLimit Unsigned32, snMspsMgmdInterfaceCurGrpCount Unsigned32, snMspsMgmdInterfaceCKSumError Counter32, snMspsMgmdInterfacePktLenError Counter32, snMspsMgmdInterfacePktsWithLocalIP Counter32, snMspsMgmdInterfaceSubnetCheckFailure Counter32, snMspsMgmdInterfaceQryFromNonQuerier Counter32, snMspsMgmdInterfaceReportVersionMisMatch Counter32, snMspsMgmdInterfaceQryVersionMisMatch Counter32, snMspsMgmdInterfaceUnknownMsgType Counter32, snMspsMgmdInterfaceInvalidV1Report Counter32, snMspsMgmdInterfaceInvalidV2Report Counter32, snMspsMgmdInterfaceInvalidV3Report Counter32, snMspsMgmdInterfaceRouterAlertCheckFailure Counter32, snMspsMgmdInterfaceIncomingSSMPkts Counter32, snMspsMgmdInterfaceInvalidSSMPkts Counter32, snMspsMgmdInterfaceJoinPktRate Integer32, snMspsMgmdInterfaceMalformedPkts Counter32, snMspsMgmdInterfaceSocketErrors Counter32, snMspsMgmdInterfaceBadScopeErrors Counter32 } snMspsMgmdInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which IGMP or MLD is enabled. The table is indexed by the ifIndex value and the InetAddressType to allow for interfaces that may be configured in both IPv4 and IPv6 modes." ::= { snMspsMgmdInterfaceEntry 1 } snMspsMgmdInterfaceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this interface. This entry along with the ifIndex value acts as the index to the snMspsMgmdInterface table. A physical interface may be configured in multiple modes concurrently, e.g., in IPv4 and IPv6 modes connected to the same interface; however, the traffic is considered to be logically separate." ::= { snMspsMgmdInterfaceEntry 2 } snMspsMgmdInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This gives the Administrative Status of the Interface." DEFVAL { up } ::= { snMspsMgmdInterfaceEntry 3 } snMspsMgmdInterfaceFastLeaveStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the fast leave feature of the IGMPV3 or MLDv2 protocol. Making this object 'enable' supports immediate intimation to the Multicast Routing Protocol on the last member leaving the Group. Making this object 'disable' will not support fast leave support. Default value of this entry will be 'disable'. This must be enabled only on those interfaces where there is single host. This can also be enabled on those interfaces having more than one hosts only if all are IGMPv3/MLDv2 hosts in IGMPV3/MLDv2 Mode. " DEFVAL { disable } ::= { snMspsMgmdInterfaceEntry 4 } snMspsMgmdInterfaceOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { snMspsMgmdInterfaceEntry 5 } snMspsMgmdInterfaceIncomingPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP/MLD Packets received by the router" ::= { snMspsMgmdInterfaceEntry 6 } snMspsMgmdInterfaceIncomingJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming JoinGroupMessage counter." ::= { snMspsMgmdInterfaceEntry 7 } snMspsMgmdInterfaceIncomingLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming LeaveGroupMessage counter." ::= { snMspsMgmdInterfaceEntry 8 } snMspsMgmdInterfaceIncomingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming Queries counter." ::= { snMspsMgmdInterfaceEntry 9 } snMspsMgmdInterfaceOutgoingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Outgoing Queries counter." ::= { snMspsMgmdInterfaceEntry 10 } snMspsMgmdInterfaceRxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General Queries received on this interface." ::= { snMspsMgmdInterfaceEntry 11 } snMspsMgmdInterfaceRxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries received on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 12 } snMspsMgmdInterfaceRxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries received on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 13 } snMspsMgmdInterfaceRxIgmpv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv1 and IGMPv2 reports reports received on this interface." ::= { snMspsMgmdInterfaceEntry 14 } snMspsMgmdInterfaceRxIgmpv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv3 reports received on this interface." ::= { snMspsMgmdInterfaceEntry 15 } snMspsMgmdInterfaceRxMldv1Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv1 reports reports received on this interface." ::= { snMspsMgmdInterfaceEntry 16 } snMspsMgmdInterfaceRxMldv2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv2 reports received on this interface." ::= { snMspsMgmdInterfaceEntry 17 } snMspsMgmdInterfaceTxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General queries sent on this interface." ::= { snMspsMgmdInterfaceEntry 18 } snMspsMgmdInterfaceTxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries sent on this interface." ::= { snMspsMgmdInterfaceEntry 19 } snMspsMgmdInterfaceTxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries sent on this interface." ::= { snMspsMgmdInterfaceEntry 20 } snMspsMgmdInterfaceTxIgmpv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP v1/v2 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 21 } snMspsMgmdInterfaceTxIgmpv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv3 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 22 } snMspsMgmdInterfaceTxMldv1Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLD v1 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 23 } snMspsMgmdInterfaceTxMldv2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv2 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 24 } snMspsMgmdInterfaceTxLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv2 leaves or MLDv1 leaves sent on this interface. This object is specific to MGMD Proxy implementation." ::= { snMspsMgmdInterfaceEntry 25 } snMspsMgmdInterfaceChannelTrackStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the explicit channel tracking feature of the IGPMV3 protocol. Configuring this object as 'enable' makes the router to keep track of each individual host that is joined to a particular multicast group or channel. Making this object 'disable' will not support explicit channel tracking feature support. Default value of this entry will be 'disable'. This must be enabled only on IGMPv3 interfaces." DEFVAL { disable } ::= { snMspsMgmdInterfaceEntry 26 } snMspsMgmdInterfaceGroupListId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicate multicast GroupList Id mapped to this interface.This grouplist will be exempted for limiting on this interface. Grouplist support is provided for IGMPv1, IGMPv2 IGMPv3 only." ::= { snMspsMgmdInterfaceEntry 27 } snMspsMgmdInterfaceLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the total number of multicast groups can be allowed for this interface.If snMspsMgmdInterfaceCurGrpCount reaches this InterfaceLimit then no membership reports will be honored on this interface except the grouplist mapped to this interface.This feature supports for IGMPv1, IGMPv2 IGMPv3 only." ::= { snMspsMgmdInterfaceEntry 28 } snMspsMgmdInterfaceCurGrpCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current count of multicast groups that were added to the interface.This counter will be incremented for each valid membership report on this interface and decremented for leave report." ::= { snMspsMgmdInterfaceEntry 29 } snMspsMgmdInterfaceCKSumError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with checksum error on an interface." ::= { snMspsMgmdInterfaceEntry 30 } snMspsMgmdInterfacePktLenError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with packet length error on an interface." ::= { snMspsMgmdInterfaceEntry 31 } snMspsMgmdInterfacePktsWithLocalIP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received on an interface with local IP address as source address." ::= { snMspsMgmdInterfaceEntry 32 } snMspsMgmdInterfaceSubnetCheckFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets dropped due to subnet check failure." ::= { snMspsMgmdInterfaceEntry 33 } snMspsMgmdInterfaceQryFromNonQuerier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of queries received from a non-querier on an interface." ::= { snMspsMgmdInterfaceEntry 34 } snMspsMgmdInterfaceReportVersionMisMatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of reports received by with version mismatch on an interface." ::= { snMspsMgmdInterfaceEntry 35 } snMspsMgmdInterfaceQryVersionMisMatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of queries received with version mismatch on an interface." ::= { snMspsMgmdInterfaceEntry 36 } snMspsMgmdInterfaceUnknownMsgType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with unknown message type on an interface." ::= { snMspsMgmdInterfaceEntry 37 } snMspsMgmdInterfaceInvalidV1Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V2 reports received on an interface." ::= { snMspsMgmdInterfaceEntry 38 } snMspsMgmdInterfaceInvalidV2Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V2 reports received on an interface." ::= { snMspsMgmdInterfaceEntry 39 } snMspsMgmdInterfaceInvalidV3Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V3 reports received on an interface." ::= { snMspsMgmdInterfaceEntry 40 } snMspsMgmdInterfaceRouterAlertCheckFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets dropped due to router alert check failure." ::= { snMspsMgmdInterfaceEntry 41 } snMspsMgmdInterfaceIncomingSSMPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of V3 reports received on an interface for SSM group range." ::= { snMspsMgmdInterfaceEntry 42 } snMspsMgmdInterfaceInvalidSSMPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid SSM v3 reports received on an interface." ::= { snMspsMgmdInterfaceEntry 43 } snMspsMgmdInterfaceJoinPktRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the rate at which the join packets can be received on an interface." DEFVAL { 0 } ::= { snMspsMgmdInterfaceEntry 44 } snMspsMgmdInterfaceMalformedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of Malformed packets received. Packet is just not as expected in the protocol specifications." ::= { snMspsMgmdInterfaceEntry 45 } snMspsMgmdInterfaceSocketErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of socket errors." ::= { snMspsMgmdInterfaceEntry 46 } snMspsMgmdInterfaceBadScopeErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of MLD packets received on the link scope IPv6 multicast address. " ::= { snMspsMgmdInterfaceEntry 47 } -- ************************************************ -- MGMD CACHE TABLE -- ************************************************ snMspsMgmdCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMgmdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP/MLD group statistic information" ::= { snMspsMgmd 10 } snMspsMgmdCacheEntry OBJECT-TYPE SYNTAX SnMspsMgmdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary Statistics of Multicast Groups" INDEX { snMspsMgmdCacheAddrType, snMspsMgmdCacheAddress, snMspsMgmdCacheIfIndex } ::= { snMspsMgmdCacheTable 1 } SnMspsMgmdCacheEntry ::= SEQUENCE { snMspsMgmdCacheAddrType InetAddressType, snMspsMgmdCacheAddress InetAddress, snMspsMgmdCacheIfIndex InterfaceIndex, snMspsMgmdCacheGroupCompMode Integer32, snMspsMgmdCacheGroupType INTEGER } snMspsMgmdCacheAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this interface. It can be IPv4 or IPv6. This entry along with the ifIndex and CacheAddress acts as the index to the snMspsMgmdCache table. A physical interface may be configured in multiple modes concurrently, e.g., in IPv4 and IPv6 modes connected to the same interface; however, the traffic is considered to be logically separate." ::= { snMspsMgmdCacheEntry 1 } snMspsMgmdCacheAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { snMspsMgmdCacheEntry 2 } snMspsMgmdCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface for which this entry contains information for an IP multicast group address." ::= { snMspsMgmdCacheEntry 3 } snMspsMgmdCacheGroupCompMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Group Compatibility Mode of the particular Group." ::= { snMspsMgmdCacheEntry 4 } snMspsMgmdCacheGroupType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2), both(3) -- static and dynamic } MAX-ACCESS read-only STATUS current DESCRIPTION "The Group configured type is static/dynamic/static and dynamic." ::= { snMspsMgmdCacheEntry 5 } -- ************************************************ -- IGMP GROUPLIST TABLE -- ************************************************ snMspsMgmdIgmpGroupListTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsMgmdIgmpGroupListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP grouplist information. Multiple range of groups will be grouped to a list and list can be mapped to an interface to exempt limit on that interface. Group list can be configured for IPv4 multicast addresses." ::= { snMspsMgmd 11 } snMspsMgmdIgmpGroupListEntry OBJECT-TYPE SYNTAX SnMspsMgmdIgmpGroupListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information related to IGMP grouplist " INDEX { snMspsMgmdIgmpGrpListId,snMspsMgmdIgmpGrpIP,snMspsMgmdIgmpGrpPrefixLen } ::= { snMspsMgmdIgmpGroupListTable 1 } SnMspsMgmdIgmpGroupListEntry ::= SEQUENCE { snMspsMgmdIgmpGrpListId Unsigned32, snMspsMgmdIgmpGrpIP IpAddress, snMspsMgmdIgmpGrpPrefixLen IpAddress, snMspsMgmdIgmpGrpListRowStatus RowStatus } snMspsMgmdIgmpGrpListId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the Id of Group List" ::= { snMspsMgmdIgmpGroupListEntry 1 } snMspsMgmdIgmpGrpIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the Group IP address." ::= { snMspsMgmdIgmpGroupListEntry 2 } snMspsMgmdIgmpGrpPrefixLen OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the Prefix Length." ::= { snMspsMgmdIgmpGroupListEntry 3 } snMspsMgmdIgmpGrpListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus of GroupList record" ::= { snMspsMgmdIgmpGroupListEntry 4 } snMspsVrrpSystem OBJECT IDENTIFIER ::= { snMspsVrrp 1 } snMspsVrrpStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VRRP is enabled Globally." ::= { snMspsVrrpSystem 1 } snMspsVrrpVridTrackStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable vrid tracking feature in VRRP Module. For example if the objects sets enabled then virtual master routers will track all other virtual routers configured on different interface. If tracking virtual router goes to init state from master/backup because of interface down then non-tracking virtual router will send priority 1 Advertisement packets to enable other router to become master. When the tracking virtual router comes new state from init state again, the VRRP Advertisement is sent again with original priority value." DEFVAL { disabled } ::= { snMspsVrrpSystem 2 } -- ******************************************************************* -- VRRP Operations Table extension starts -- ******************************************************************* snMspsVrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence of 'snMspsVrrpOperEntry' items. This table is a proprietary extension to the standard fsVrrpOperTable" ::= { snMspsVrrpSystem 3 } snMspsVrrpOperEntry OBJECT-TYPE SYNTAX SnMspsVrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsVrrpOperTable contains the additional operational characteristics of a virtual router apart from fsVrrpOperTable." AUGMENTS { vrrpOperEntry } ::= { snMspsVrrpOperTable 1 } SnMspsVrrpOperEntry ::= SEQUENCE { snMspsVrrpAdminPriority Integer32, snMspsVrrpOperTrackGroupId Unsigned32, snMspsVrrpOperDecrementPriority Unsigned32 } snMspsVrrpAdminPriority OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is same as that of vrrpOperPriority specified in VRRP-MIB. The only difference is, if the router owns the associated IP address(es) then vrrpOperPriority will have the value 255 and fsVrrpAdminPriority will have the value configured by the administrator. Write operation requires admin down for this instance and the change will be reflected in the value of vrrpOperPriority also." DEFVAL { 100 } ::= { snMspsVrrpOperEntry 1 } snMspsVrrpOperTrackGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the group index of the tracking group table snMspsVrrpOperTrackGroupTable. When the interface which is tracked by snMspsVrrpOperTrackGroupTable goes operationally down and if this virtual router entry is the master, the virtual router sends VRRP Advertisement with its actual priority value decremented by the value configured in snMspsVrrpOperDecrementPriority to enable other router to become master. When the interface which is tracked comes operationally up again, the VRRP Advertisement is sent again with original priority value. This object is NOT applicable for VRRP Master routers owning the IPv4 address. This object is allowed to set even if vrrpOperRowStatus is active and vrrpOperAdminState is up." DEFVAL { 0 } ::= { snMspsVrrpOperEntry 2 } snMspsVrrpOperDecrementPriority OBJECT-TYPE SYNTAX Unsigned32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the priority value carried by the VRRP Master router in VRRP Advertisements when whose interface being tracked by snMspsVrrpOperTrackGroupTable goes operationally down. This object is NOT applicable for VRRP Master routers owning the IPv4 address. This object is allowed to set even if vrrpOperRowStatus is active and vrrpOperAdminState is up." DEFVAL { 0 } ::= { snMspsVrrpOperEntry 3 } -- ******************************************************************* -- VRRP Operations Table extension ends -- ******************************************************************* -- ******************************************************************* -- VRRP Oper Track Group Table - Starts -- ******************************************************************* snMspsVrrpOperTrackGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpOperTrackGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Oper Track Group table for a VRRP router which consists of a sequence of 'snMspsVrrpOperTrackGroupEntry' items. This table contains the list of characteristics tracked by this virtual router." ::= { snMspsVrrpSystem 4 } snMspsVrrpOperTrackGroupEntry OBJECT-TYPE SYNTAX SnMspsVrrpOperTrackGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsVrrpOperTrackGroupTable contains the characteristics tracked by this virtual router. " INDEX { snMspsVrrpOperTrackGroupIndex } ::= { snMspsVrrpOperTrackGroupTable 1 } SnMspsVrrpOperTrackGroupEntry ::= SEQUENCE { snMspsVrrpOperTrackGroupIndex Unsigned32, snMspsVrrpOperTrackedGroupTrackedLinks Unsigned32, snMspsVrrpOperTrackRowStatus RowStatus } snMspsVrrpOperTrackGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of this track group table. " ::= { snMspsVrrpOperTrackGroupEntry 1 } snMspsVrrpOperTrackedGroupTrackedLinks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of links to be tracked. The value configured here indicates the number of links in snMspsVrrpOperTrackGroupIfTable to go down to give notification to VRRP Operations table so that master to backup transition is initiated. Default value is 0 meaning only if all the links configured in snMspsVrrpOperTrackGroupIfTable goes down, indication is given to VRRP Operations table to initiate master to backup transition. The value configured here should be less than or equal to the number of entries in snMspsVrrpOperTrackGroupIfTable or zero at all the time. If value is anything else, appropriate error is thrown. " DEFVAL { 0 } ::= { snMspsVrrpOperTrackGroupEntry 2 } snMspsVrrpOperTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured and atleast one entry in snMspsVrrpOperTrackGroupIfTable is created, the value of the corresponding instance of the 'snMspsVrrpOperTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) one or more entries are created in snMspsVrrpOperTrackGroupIfTable is created, value of the object snMspsVrrpOperTrackedGroupTrackedLinks is set to number of entries created in snMspsVrrpOperTrackGroupIfTable or 0. A typical order of operation to add a row is: 1. Create a row in snMspsVrrpOperTrackGroupTable with createAndWait(5). 2. Create one or more entries in snMspsVrrpOperTrackGroupIfTable 3. Set snMspsVrrpOperTrackedGroupTrackedLinks as the number of entries created in snMspsVrrpOperTrackGroupIfTable. 4. Set snMspsVrrpOperTrackRowStatus to active(1). An Entry in this table can be deleted, only if there are no entries in snMspsVrrpOperTrackGroupIfTable. Before an entry is deleted in snMspsVrrpOperTrackGroupIfTable is deleted, the value snMspsVrrpOperTrackedGroupTrackedLinks should be adjusted. Otherwise, error will be thrown. Value 'snMspsVrrpOperTrackGroupIndex' is used as a reference in snMspsVrrpOperTable. Acceptable configurable values for this object are createAndGo(4), createAndWait(5), active(1) and destroy(6). " ::= { snMspsVrrpOperTrackGroupEntry 3 } -- ******************************************************************* -- VRRP Oper Track Group Table extension - Ends -- ******************************************************************* -- ******************************************************************* -- VRRP Oper Track Group If Table - Starts -- ******************************************************************* snMspsVrrpOperTrackGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpOperTrackGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Oper Track Group If table for a VRRP router which consists of a sequence of 'snMspsVrrpOperTrackGroupIfEntry' items. This table contains the interfaces to be tracked by this virtual router." ::= { snMspsVrrpSystem 5 } snMspsVrrpOperTrackGroupIfEntry OBJECT-TYPE SYNTAX SnMspsVrrpOperTrackGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsVrrpOperTrackGroupIfTable contains the interfaces tracked by this virtual router. " INDEX { snMspsVrrpOperTrackGroupIndex, snMspsVrrpOperTrackGroupIfIndex } ::= { snMspsVrrpOperTrackGroupIfTable 1 } SnMspsVrrpOperTrackGroupIfEntry ::= SEQUENCE { snMspsVrrpOperTrackGroupIfIndex InterfaceIndexOrZero, snMspsVrrpOperTrackGroupIfRowStatus RowStatus } snMspsVrrpOperTrackGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ifIndex of the interface being tracked for link operational status. " ::= { snMspsVrrpOperTrackGroupIfEntry 1 } snMspsVrrpOperTrackGroupIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) and entry automatically transitions to active(1). Before an entry is deleted in snMspsVrrpOperTrackGroupIfTable is deleted, the value snMspsVrrpOperTrackedGroupTrackedLinks should be adjusted. Otherwise, error will be thrown. Value of snMspsVrrpOperTrackedGroupTrackedLinks should always be less than or equal to the number of entries created here or zero. If value is anything else, appropriate error is thrown. Acceptable configurable values for this object are createAndGo(4) and destroy(6). " ::= { snMspsVrrpOperTrackGroupIfEntry 2 } -- ******************************************************************* -- VRRP Oper Track Group If Table extension - Ends -- ******************************************************************* -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapVRRPStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Device changed vrrp master state." ::= { snMspsTrapPrefix 2201 } -- ------------------------------------------------------------- -- END OF SNMPv2 Notifications -- ------------------------------------------------------------- snMspsVrrpv3System OBJECT IDENTIFIER ::= { snMspsVrrpv3 1 } snMspsVrrpv3Status OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VRRP is enabled Globally." ::= { snMspsVrrpv3System 1 } snMspsVrrpv3MaxOperEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the Maximum Number of Oper Table Entries." ::= { snMspsVrrpv3System 2 } snMspsVrrpv3VridTrackStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable vrid tracking feature in VRRPv3 Module. For example if the objects sets enabled then virtual master routers will track all other virtual routers configured on different interface. If tracking virtual router goes to init state from master/backup because of interface down then non-tracking virtual router will send priority 1 Advertisement packets to enable other router to become master. When the tracking virtual router comes new state from init state again, the VRRP Advertisement is sent again with original priority value." DEFVAL { disabled } ::= { snMspsVrrpv3System 3 } -- ******************************************************************* -- VRRPV3 Operations Table extension -- ******************************************************************* snMspsVrrpv3OperationsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence of 'fsVrrpOperEntry' items. This table is a proprietary extension to the standard vrrpOperTable" ::= { snMspsVrrpv3System 4 } snMspsVrrpv3OperationsEntry OBJECT-TYPE SYNTAX SnMspsVrrpv3OperationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the fsVrrpOperTable contains the additional operational characteristics of a virtual router apart from vrrpOperTable." INDEX { ifIndex, vrrpv3OperationsVrId, vrrpv3OperationsInetAddrType } ::= { snMspsVrrpv3OperationsTable 1 } SnMspsVrrpv3OperationsEntry ::= SEQUENCE { snMspsVrrpv3AdminPriority Integer32, snMspsVrrpv3SendAndRcvCompatibleVersion TruthValue, snMspsVrrpv3OperationsTrackGroupId Unsigned32, snMspsVrrpv3OperationsDecrementPriority Unsigned32 } snMspsVrrpv3AdminPriority OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is same as that of vrrpv3OperationsPriority specified in VRRPV3-MIB. The only difference is, if the router owns the associated IP address(es) then vrrpv3OperationsPriority will have the value 255 and snMspsVrrpv3AdminPriority will have the value configured by the administrator. Write operation requires vrrpv3OperationsRowStatus as notInService(2) should be used to administratively bring the row down for this instance and the change will be reflected in the value of vrrpv3OperationsPriority also." DEFVAL { 100 } ::= { snMspsVrrpv3OperationsEntry 1 } snMspsVrrpv3SendAndRcvCompatibleVersion OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is true(1) then virtual router will send and receive version2 and version3 packets. If false(2) then virtual router will send and receive version3 packets only. Default is false(2). This object is not relevant for rows representing VRRP over IPv6 and should be set to false(2)." DEFVAL { false } ::= { snMspsVrrpv3OperationsEntry 2 } snMspsVrrpv3OperationsTrackGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the group index of the tracking group table snMspsVrrpv3OperationsTrackGroupTable. When the interface which is tracked by snMspsVrrpv3OperationsTrackGroupTable goes operationally down and if this virtual router entry is the master, the virtual router sends VRRP Advertisement with its actual priority value decremented by the value configured in snMspsVrrpv3OperationsDecrementPriority to enable other router to become master. When the interface which is tracked comes operationally up again, the VRRP Advertisement is sent again with original priority value. This object is NOT applicable for VRRP Master routers owning the IPvX address. This object is allowed to set even if vrrpv3OperationsRowStatus is active. " DEFVAL { 0 } ::= { snMspsVrrpv3OperationsEntry 3 } snMspsVrrpv3OperationsDecrementPriority OBJECT-TYPE SYNTAX Unsigned32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the priority value carried by the VRRP Master router in VRRP Advertisements when whose interface being tracked by snMspsVrrpv3OperationsTrackGroupTable goes operationally down. This object is NOT applicable for VRRP Master routers owning the IPvX address. This object is allowed to set even if vrrpv3OperationsRowStatus is active. " DEFVAL { 0 } ::= { snMspsVrrpv3OperationsEntry 4 } -- ******************************************************************* -- VRRP V3 Operations Track Group Table - Starts -- ******************************************************************* snMspsVrrpv3OperationsTrackGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsTrackGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations Track Group table for a VRRP router which consists of a sequence of 'snMspsVrrpv3OperationsTrackGroupEntry' items. This table contains the list of characteristics tracked by this virtual router." ::= { snMspsVrrpv3System 5 } snMspsVrrpv3OperationsTrackGroupEntry OBJECT-TYPE SYNTAX SnMspsVrrpv3OperationsTrackGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsVrrpv3OperationsTrackGroupTable contains the characteristics tracked by this virtual router. " INDEX { snMspsVrrpv3OperationsTrackGroupIndex } ::= { snMspsVrrpv3OperationsTrackGroupTable 1 } SnMspsVrrpv3OperationsTrackGroupEntry ::= SEQUENCE { snMspsVrrpv3OperationsTrackGroupIndex Unsigned32, snMspsVrrpv3OperationsTrackedGroupTrackedLinks Unsigned32, snMspsVrrpv3OperationsTrackRowStatus RowStatus } snMspsVrrpv3OperationsTrackGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of this track group table. " ::= { snMspsVrrpv3OperationsTrackGroupEntry 1 } snMspsVrrpv3OperationsTrackedGroupTrackedLinks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of links to be tracked. The value configured here indicates the number of links in snMspsVrrpv3OperationsTrackGroupIfTable to go down to give notification to VRRP Operations table so that master to backup transition is initiated. Default value is 0 meaning only if all the links configured in snMspsVrrpv3OperationsTrackGroupIfTable goes down, indication is given to VRRP Operations table to initiate master to backup transition. The value configured here should be less than or equal to the number of entries in snMspsVrrpv3OperationsTrackGroupIfTable or zero at all the time. If value is anything else, appropriate error is thrown. " ::= { snMspsVrrpv3OperationsTrackGroupEntry 2 } snMspsVrrpv3OperationsTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured and atleast one entry in snMspsVrrpv3OperationsTrackGroupIfTable is created, the value of the corresponding instance of the 'snMspsVrrpv3OperationsTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) one or more entries are created in snMspsVrrpv3OperationsTrackGroupIfTable is created, value of the object snMspsVrrpv3OperationsTrackedGroupTrackedLinks is set to number of entries created in snMspsVrrpv3OperationsTrackGroupIfTable or 0. A typical order of operation to add a row is: 1. Create a row in snMspsVrrpv3OperationsTrackGroupTable with createAndWait(5). 2. Create one or more entries in snMspsVrrpv3OperationsTrackGroupIfTable 3. Set snMspsVrrpv3OperationsTrackedGroupTrackedLinks as the number of entries created in snMspsVrrpv3OperationsTrackGroupIfTable. 4. Set snMspsVrrpv3OperationsTrackRowStatus to active(1). An Entry in this table can be deleted, only if there are no entries in snMspsVrrpv3OperationsTrackGroupIfTable. Before an entry is deleted in snMspsVrrpv3OperationsTrackGroupIfTable is deleted, the value snMspsVrrpv3OperationsTrackedGroupTrackedLinks should be adjusted. Otherwise, error will be thrown. Value 'snMspsVrrpv3OperationsTrackGroupIndex' is used as a reference in snMspsVrrpv3OperationsTable. Acceptable configurable values for this object are createAndGo(4), createAndWait(5), active(1) and destroy(6). " ::= { snMspsVrrpv3OperationsTrackGroupEntry 3 } -- ******************************************************************* -- VRRPv3 Operations Track Group Table extension - Ends -- ******************************************************************* -- ******************************************************************* -- VRRPv3 Operations Track Group If Table - Starts -- ******************************************************************* snMspsVrrpv3OperationsTrackGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsTrackGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Oper Track Group If table for a VRRP router which consists of a sequence of 'snMspsVrrpv3OperationsTrackGroupIfEntry' items. This table contains the interfaces to be tracked by this virtual router." ::= { snMspsVrrpv3System 6 } snMspsVrrpv3OperationsTrackGroupIfEntry OBJECT-TYPE SYNTAX SnMspsVrrpv3OperationsTrackGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the snMspsVrrpv3OperationsTrackGroupIfTable contains the interfaces tracked by this virtual router. " INDEX { snMspsVrrpv3OperationsTrackGroupIndex, snMspsVrrpv3OperationsTrackGroupIfIndex } ::= { snMspsVrrpv3OperationsTrackGroupIfTable 1 } SnMspsVrrpv3OperationsTrackGroupIfEntry ::= SEQUENCE { snMspsVrrpv3OperationsTrackGroupIfIndex InterfaceIndexOrZero, snMspsVrrpv3OperationsTrackGroupIfRowStatus RowStatus } snMspsVrrpv3OperationsTrackGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ifIndex of the interface being tracked for link operational status. " ::= { snMspsVrrpv3OperationsTrackGroupIfEntry 1 } snMspsVrrpv3OperationsTrackGroupIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) and entry automatically transitions to active(1). Before an entry is deleted in snMspsVrrpv3OperationsTrackGroupIfTable is deleted, the value snMspsVrrpv3OperationsTrackedGroupTrackedLinks should be adjusted. Otherwise, error will be thrown. Value of snMspsVrrpv3OperationsTrackedGroupTrackedLinks should always be less than or equal to the number of entries created here or zero. If value is anything else, appropriate error is thrown. Acceptable configurable values for this object are createAndGo(4) and destroy(6). " ::= { snMspsVrrpv3OperationsTrackGroupIfEntry 2 } -- ******************************************************************* -- VRRPv3 Operations Track Group If Table extension - Ends -- ******************************************************************* snMspsVrrpv3TraceOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable trace statements in VRRPv3 Module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: 0x00000000 - No Traces 0x0000ffff - All Traces 0x00000001 - Packet Traces 0x00000002 - Event Traces 0x00000004 - Init Traces 0x00000008 - Timers Traces 0x00000010 - All Failures Traces For example if the 0x00000001 and 0x00000002 are set, then the trace statement related to Packet and Event related messages will be printed." DEFVAL { 0 } ::= { snMspsVrrpv3System 7 } -- ---------------------------------------------------------------- -- snmspsrmap.mib -- SIMATIC NET Industrial Ethernet Scalance -- MSPS Private MIB -- Copyright (c) 2010, 2013 Siemens AG -- ---------------------------------------------------------------- -- -- MIB Module : SN-MSPS-ROUTE_MAP-MIB -- -- Revision : V0.0.0.1 -- Date : 2013/07/03 -- -- ---------------------------------------------------------------- ------------------------------------------------------------------------------ -- Groups in MIB ------------------------------------------------------------------------------ snMspsRMapGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 1 } snMspsRMapTrapCfgGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 2 } snMspsRMapTrapGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 3 } snMspsRMapTrapNotifications OBJECT IDENTIFIER ::= { snMspsRMapTrapGroup 0 } --Route map table snMspsRMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map table contains route map name, sequence number and access status (Permit/Deny).Route-maps can be used in policy based routing and route redistribution" ::= { snMspsRMapGroup 1 } snMspsRMapEntry OBJECT-TYPE SYNTAX SnMspsRMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map table" INDEX { snMspsRMapName, snMspsRMapSeqNum } ::= { snMspsRMapTable 1 } SnMspsRMapEntry ::= SEQUENCE { snMspsRMapName DisplayString, snMspsRMapSeqNum Unsigned32, snMspsRMapAccess INTEGER, snMspsRMapRowStatus RowStatus } snMspsRMapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps." ::= { snMspsRMapEntry 1 } snMspsRMapSeqNum OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number that indicates the position of a new route map in the list of route maps already configured with the same name" ::= { snMspsRMapEntry 2 } snMspsRMapAccess OBJECT-TYPE SYNTAX INTEGER { permit (1), deny (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Access type associated with sequence number in a route-map. Once an instance of this object is created, its value can not be changed" DEFVAL {permit} ::= { snMspsRMapEntry 3 } snMspsRMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapEntry 4} -- destination match table snMspsRMapDestMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapDestMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map destination Match table contains various objects used for matching the parameters of the route " ::= { snMspsRMapGroup 2 } snMspsRMapDestMatchEntry OBJECT-TYPE SYNTAX SnMspsRMapDestMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map match table" INDEX { snMspsRMapName, snMspsRMapSeqNum, snMspsRMapMatchDestInetType, snMspsRMapMatchDestInetAddress, snMspsRMapMatchDestInetPrefix } ::= { snMspsRMapDestMatchTable 1 } SnMspsRMapDestMatchEntry ::= SEQUENCE { snMspsRMapMatchDestInetType InetAddressType, snMspsRMapMatchDestInetAddress InetAddress, snMspsRMapMatchDestInetPrefix InetAddressPrefixLength, snMspsRMapMatchDestRowStatus RowStatus } snMspsRMapMatchDestInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of destination network Inet address IPv4(1) IPv6(2)" ::= { snMspsRMapDestMatchEntry 1 } snMspsRMapMatchDestInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inet address of destination network" ::= { snMspsRMapDestMatchEntry 2 } snMspsRMapMatchDestInetPrefix OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length of Inet address of destination network" ::= { snMspsRMapDestMatchEntry 3 } snMspsRMapMatchDestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapDestMatchEntry 4 } -- source match table snMspsRMapSourceMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapSourceMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map source Match table contains various objects used for matching the parameters of the route " ::= { snMspsRMapGroup 3 } snMspsRMapSourceMatchEntry OBJECT-TYPE SYNTAX SnMspsRMapSourceMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map match table" INDEX { snMspsRMapName, snMspsRMapSeqNum, snMspsRMapMatchSourceInetType, snMspsRMapMatchSourceInetAddress, snMspsRMapMatchSourceInetPrefix } ::= { snMspsRMapSourceMatchTable 1 } SnMspsRMapSourceMatchEntry ::= SEQUENCE { snMspsRMapMatchSourceInetType InetAddressType, snMspsRMapMatchSourceInetAddress InetAddress, snMspsRMapMatchSourceInetPrefix InetAddressPrefixLength, snMspsRMapMatchSourceRowStatus RowStatus } snMspsRMapMatchSourceInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Matches the type of source network Inet address IPv4(1) IPv6(2)" ::= { snMspsRMapSourceMatchEntry 1 } snMspsRMapMatchSourceInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Matches Inet address of source network" ::= { snMspsRMapSourceMatchEntry 2 } snMspsRMapMatchSourceInetPrefix OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Matches the prefix length of Inet address of source network" ::= { snMspsRMapSourceMatchEntry 3 } snMspsRMapMatchSourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapSourceMatchEntry 4 } -- NextHop match table snMspsRMapNextHopMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapNextHopMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map NextHop Match table contains various objects used for matching the parameters of the route " ::= { snMspsRMapGroup 4 } snMspsRMapNextHopMatchEntry OBJECT-TYPE SYNTAX SnMspsRMapNextHopMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map match table" INDEX { snMspsRMapName, snMspsRMapSeqNum, snMspsRMapMatchNextHopInetType, snMspsRMapMatchNextHopInetAddr } ::= { snMspsRMapNextHopMatchTable 1 } SnMspsRMapNextHopMatchEntry ::= SEQUENCE { snMspsRMapMatchNextHopInetType InetAddressType, snMspsRMapMatchNextHopInetAddr InetAddress, snMspsRMapMatchNextHopRowStatus RowStatus } snMspsRMapMatchNextHopInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Matches the Inet address type of next hop router IPv4(1) IPv6(2)" ::= { snMspsRMapNextHopMatchEntry 1 } snMspsRMapMatchNextHopInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Matches the Inet address of next hop router" ::= { snMspsRMapNextHopMatchEntry 2 } snMspsRMapMatchNextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapNextHopMatchEntry 3 } -- match table snMspsRMapMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match table contains various objects used for matching the parameters of the route " ::= { snMspsRMapGroup 5 } snMspsRMapMatchEntry OBJECT-TYPE SYNTAX SnMspsRMapMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map match table" INDEX { snMspsRMapName, snMspsRMapSeqNum, snMspsRMapMatchType, snMspsRMapMatchValue } ::= { snMspsRMapMatchTable 1 } SnMspsRMapMatchEntry ::= SEQUENCE { snMspsRMapMatchType Unsigned32, snMspsRMapMatchValue Unsigned32, snMspsRMapMatchRowStatus RowStatus } snMspsRMapMatchType OBJECT-TYPE SYNTAX Unsigned32 (1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match Type Identifies the specified route-map matche entry. see match types in the below. RMAP_MATCH_CMD_INTERFACE=4, RMAP_MATCH_CMD_METRIC=5, RMAP_MATCH_CMD_TAG=6, RMAP_MATCH_CMD_METRIC_TYPE=7, RMAP_MATCH_CMD_ROUTE_TYPE=8, RMAP_MATCH_CMD_ASPATH_TAG=9, RMAP_MATCH_CMD_COMMUNITY=10, RMAP_MATCH_CMD_LOCAL_PREF=11, RMAP_MATCH_CMD_ORIGIN=12 " ::= { snMspsRMapMatchEntry 1 } snMspsRMapMatchValue OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vale should be related to match type. If user want to configure RMAP_MATCH_CMD_INTERFACE match type then user should give relative interface index. If user want to configure RMAP_MATCH_CMD_METRIC match type then user should give metric value." ::= { snMspsRMapMatchEntry 2 } snMspsRMapMatchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapMatchEntry 3 } -- set table snMspsRMapSetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsRMapSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set table contains various parameters that are set during the process of policy routing or route redistribution " ::= { snMspsRMapGroup 6 } snMspsRMapSetEntry OBJECT-TYPE SYNTAX SnMspsRMapSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row instance of the route map set table" INDEX { snMspsRMapName, snMspsRMapSeqNum } ::= { snMspsRMapSetTable 1 } SnMspsRMapSetEntry ::= SEQUENCE { snMspsRMapSetNextHopInetType InetAddressType, snMspsRMapSetNextHopInetAddr InetAddress, snMspsRMapSetInterface InterfaceIndex, snMspsRMapSetMetric Integer32, snMspsRMapSetTag Unsigned32, snMspsRMapSetRouteType INTEGER, snMspsRMapSetASPathTag Unsigned32, snMspsRMapSetCommunity Unsigned32, snMspsRMapSetLocalPref Integer32, snMspsRMapSetOrigin INTEGER, snMspsRMapSetWeight Unsigned32, snMspsRMapSetEnableAutoTag INTEGER, snMspsRMapSetLevel INTEGER, snMspsRMapSetRowStatus RowStatus } snMspsRMapSetNextHopInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION " Inet address type of next hop IPv4(1) IPv6(2)" ::= { snMspsRMapSetEntry 1 } snMspsRMapSetNextHopInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " This represents the nexthop Inet address and is set for a route which passes the match condition." ::= { snMspsRMapSetEntry 2 } snMspsRMapSetInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "This value identifies the local interface through which the next hop can be reached and is set for a route which passes the match conditions." ::= { snMspsRMapSetEntry 3 } snMspsRMapSetMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The primary routing metric.The semantics of this metric are determined by the routing-protocol specified." ::= { snMspsRMapSetEntry 4} snMspsRMapSetTag OBJECT-TYPE SYNTAX Unsigned32(1..214748367) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the tag value of the routing protocol." ::= { snMspsRMapSetEntry 5 } snMspsRMapSetRouteType OBJECT-TYPE SYNTAX INTEGER { local (3), remote (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the route type as per RFC 2096" ::= { snMspsRMapSetEntry 6 } snMspsRMapSetASPathTag OBJECT-TYPE SYNTAX Unsigned32(1..214748367) MAX-ACCESS read-write STATUS current DESCRIPTION " Converts the tag of a route into an autonomous system path. Applies only when redistributing routes into BGP. " ::= { snMspsRMapSetEntry 7} snMspsRMapSetCommunity OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets BGP community attribute.The communities that BGP supports range from well known ones like internet,no-advst,no-export to add communities to already existing ones with the BGP. " ::= { snMspsRMapSetEntry 8 } snMspsRMapSetLocalPref OBJECT-TYPE SYNTAX Integer32 (1..214748367) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets reference value for the autonomous system path. The preference is sent only to all routers in the local autonomous system." ::= { snMspsRMapSetEntry 9 } snMspsRMapSetOrigin OBJECT-TYPE SYNTAX INTEGER { igp (1), egp (2), incomplete (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the BGP origin code.They can be from Remote Interior Gateway Protocol (IGP) system or from Local Exterior Gateway Protocol (EGP) system or from Remote autonomous system number which ranges from 0 to 65535 or from incomplete which mean Unknown heritage." ::= { snMspsRMapSetEntry 10 } snMspsRMapSetWeight OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the BGP weight for the routing table" ::= { snMspsRMapSetEntry 11 } snMspsRMapSetEnableAutoTag OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable automatic computing of tag table when redistributing routes from BGP into IGP" DEFVAL { disable } ::= { snMspsRMapSetEntry 12 } snMspsRMapSetLevel OBJECT-TYPE SYNTAX INTEGER { level1 (1), level2 (2), level12 (3), stubarea (4), backbone (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set level for routes that are advertised into the specified area of the routing domain" ::= { snMspsRMapSetEntry 13 } snMspsRMapSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { snMspsRMapSetEntry 14 } --route map snmp trap Configuration snMspsRmapTrapCfgEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable sendig route map traps when matching of route with route map occured" DEFVAL { enable } ::= { snMspsRMapTrapCfgGroup 1 } --route map snmp traps definition snMspsRMapTrapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps." ::= { snMspsRMapTrapGroup 1 } snMspsRMapTrapSeqNum OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Number that indicates the position of a new route map in the list of route maps already configured with the same name" ::= { snMspsRMapTrapGroup 2 } --route map snmp traps notifications snMspsRMapTrapMatch NOTIFICATION-TYPE OBJECTS { snMspsRMapTrapName, snMspsRMapTrapSeqNum } STATUS deprecated DESCRIPTION "Signifies that there has been a route matching with route map" ::= { snMspsRMapTrapNotifications 1 } -- PSE Objects snMspsPoePsePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPoePsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A private extension of standard pethPsePortTable." ::= { snMspsPoe 1 } snMspsPoePsePortEntry OBJECT-TYPE SYNTAX SnMspsPoePsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display the power characteristics of a power Ethernet PSE port." AUGMENTS { pethPsePortEntry } ::= { snMspsPoePsePortTable 1 } SnMspsPoePsePortEntry ::= SEQUENCE { snMspsPoePsePortPower Gauge32, snMspsPoePsePortVoltage Gauge32, snMspsPoePsePortCurrent Gauge32, snMspsPoePsePortMaximumPower INTEGER, snMspsPoePsePortMaximumPowerUsed TruthValue } snMspsPoePsePortPower OBJECT-TYPE SYNTAX Gauge32 (1..65535) UNITS "Milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured power usage of ports expressed in Milliwatts." ::= { snMspsPoePsePortEntry 15 } snMspsPoePsePortVoltage OBJECT-TYPE SYNTAX Gauge32 (1..65535) UNITS "Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage usage of ports expressed in Volts." ::= { snMspsPoePsePortEntry 16 } snMspsPoePsePortCurrent OBJECT-TYPE SYNTAX Gauge32 (1..65535) UNITS "Milliamps" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured current usage of ports expressed in Milliamps." ::= { snMspsPoePsePortEntry 17 } snMspsPoePsePortMaximumPower OBJECT-TYPE SYNTAX INTEGER (0..30) UNITS "W" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum power that can be assigned to devices connected to this port in Watts" DEFVAL { 0 } ::= { snMspsPoePsePortEntry 18 } snMspsPoePsePortMaximumPowerUsed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Determines if snMspsPoePsePortMaximumPower is used to limit the power delivered to the device connected to this port" DEFVAL { false } ::= { snMspsPoePsePortEntry 19 } -- Main PSE Objects snMspsPoeMainPseTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsPoeMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A private extension of standard pethMainPseTable." ::= { snMspsPoe 3 } snMspsPoeMainPseEntry OBJECT-TYPE SYNTAX SnMspsPoeMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display the power characteristics of a PSE. " AUGMENTS { pethMainPseEntry } ::= { snMspsPoeMainPseTable 1 } SnMspsPoeMainPseEntry ::= SEQUENCE { snMspsPoeMainPseAllocatedPower Gauge32, snMspsPoeMainPseMaximumPower INTEGER, snMspsPoeMainPseDescription DisplayString } snMspsPoeMainPseAllocatedPower OBJECT-TYPE SYNTAX Gauge32 (1..65535) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "There is a certain power that needs to be allocated (reserved) for each PSE basing on pethPsePortPowerClassifications (like for Class 0,3 needs 15,4 Watts) of PD(Powered Devices) connected to it" ::= { snMspsPoeMainPseEntry 6 } snMspsPoeMainPseMaximumPower OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum power that can be assigned to devices connected to a PSE" ::= { snMspsPoeMainPseEntry 8 } snMspsPoeMainPseDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of a PSE" ::= { snMspsPoeMainPseEntry 10 } -- ------------------------------------------------------------- -- SNMPv2 Notifications -- ------------------------------------------------------------- snMspsTrapPoeStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Poe state change notification." ::= { snMspsTrapPrefix 3051 } snMspsNfcStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable NFC feature / chip." ::= { snMspsNfc 1 } snMspsCableTesterVCT OBJECT IDENTIFIER ::= { snMspsCableTester 1 } snMspsCableTesterVCTTDR OBJECT IDENTIFIER ::= { snMspsCableTesterVCT 1 } -- -------------------------------------------------------------- -- VCTControlTable Sub-Group -- -------------------------------------------------------------- snMspsCableTesterVCTTDRControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port objects for virtual cable test feature uses Time Domain Reflectometry to determine the quality of cables, connectors, and terminations. Test can not be performed on fiber based interfaces. Test causes a link down!" ::= { snMspsCableTesterVCTTDR 10 } snMspsCableTesterVCTTDRControlEntry OBJECT-TYPE SYNTAX SnMspsCableTesterVCTTDRControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface entry containing objects for a particular interface." INDEX { snMspsCableTesterVCTTDRControlPortIndex } ::= { snMspsCableTesterVCTTDRControlTable 1 } SnMspsCableTesterVCTTDRControlEntry ::= SEQUENCE { snMspsCableTesterVCTTDRControlPortIndex INTEGER, snMspsCableTesterVCTTDRControlTrigger INTEGER } snMspsCableTesterVCTTDRControlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique number for each interface. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { snMspsCableTesterVCTTDRControlEntry 1 } snMspsCableTesterVCTTDRControlTrigger OBJECT-TYPE SYNTAX INTEGER { no-operation(1), test-port(2), port-under-test(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Objekt to trigger the virtual cable test: no-operation(1) no operation, test-port(2) start a virtual cable test on the selected port, port-under-test(3) a virtual cable test is currently running." ::= { snMspsCableTesterVCTTDRControlEntry 2 } -- -------------------------------------------------------------- -- VCTResultTable Sub-Group -- -------------------------------------------------------------- snMspsCableTesterVCTTDRResultTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing per-port and per-pair result objects for virtual cable test feature uses Time Domain Reflectometry to determine the quality of cables, connectors, and terminations.Test can not be performed on fiber based interfaces. Test causes a link down!" ::= { snMspsCableTesterVCTTDR 11 } snMspsCableTesterVCTTDRResultEntry OBJECT-TYPE SYNTAX SnMspsCableTesterVCTTDRResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface entry containing objects for a particular interface." INDEX { snMspsCableTesterVCTTDRResultPortIndex, snMspsCableTesterVCTTDRResultCablePairIndex } ::= { snMspsCableTesterVCTTDRResultTable 1 } SnMspsCableTesterVCTTDRResultEntry ::= SEQUENCE { snMspsCableTesterVCTTDRResultPortIndex INTEGER, snMspsCableTesterVCTTDRResultCablePairIndex INTEGER, snMspsCableTesterVCTTDRResultStatus INTEGER, snMspsCableTesterVCTTDRResultLength INTEGER, snMspsCableTesterVCTTDRResultDistance INTEGER } snMspsCableTesterVCTTDRResultPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique number for each interface. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { snMspsCableTesterVCTTDRResultEntry 1 } snMspsCableTesterVCTTDRResultCablePairIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique number for each cable pair on the interface." ::= { snMspsCableTesterVCTTDRResultEntry 2 } snMspsCableTesterVCTTDRResultStatus OBJECT-TYPE SYNTAX INTEGER { cableNotTested(1), cableTestFail(2), cableTestNormal(3), cableTestImpedanceMismatch(4), cableTestOpen(5), cableTestShort(6), cableTestShortWithPair0(7), cableTestShortWithPair1(8), cableTestShortWithPair2(9), cableTestShortWithPair3(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the virtual cable test: cableNotTested(1) test not performed, cableTestFail(2) test not performed successfully, cableTestNormal(3) test performed - passed, cableTestImpedanceMismatch(4) test performed - impedance mismatch, cableTestOpen(5) test performed - open in cable, cableTestShort(6) test performed - short in cable, cableTestShortWithPair0(7) test performed - short in TX cable with RX pair 0, cableTestShortWithPair1(8) test performed - short in TX cable with RX pair 1, cableTestShortWithPair2(9) test performed - short in TX cable with RX pair 2, cableTestShortWithPair3(10) test performed - short in TX cable with RX pair 3" ::= { snMspsCableTesterVCTTDRResultEntry 3 } snMspsCableTesterVCTTDRResultLength OBJECT-TYPE SYNTAX INTEGER { lengthLessThan50m(1), length50m-80m(2), length80m-110m(3), length110m-140m(4), lengthMoreThan140m(5), lengthUnknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current measured cable length of the virtual cable test, which performed passed: lengthLessThan50m(1) tested length less than 50m, length50m-80m(2) tested length between 50m and 80m, length80m-110m(3) tested length between 80m and 110m, length110m-140m(4) tested length between 110m and 140m, lengthMoreThan140m(5) tested length more than 140m, lengthUnknown(6) length unknown or not tested." ::= { snMspsCableTesterVCTTDRResultEntry 4 } snMspsCableTesterVCTTDRResultDistance OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current measured cable length of the virtual cable test, which performed with a cableTestImpedanceMismatch, cableTestOpen or cableTestShort. The distance is shown in meter." ::= { snMspsCableTesterVCTTDRResultEntry 5 } -- ---------------------- -- snMspsDiagnostics.mib -- -- SIEMENS AG -- Industry Automation Division -- -- object definitions for environmental data -- -- Copyright (c) 2013 Siemens AG -- All rights reserved. -- ---------------------------------------------------------------------- -- -- MIB Module : SN-MSPS-DIAGNOSTICS-MIB -- -- Revision : V0.0.0.2 -- Date : 2018/02/26 -- -- ---------------------------------------------------------------------- snMspsDiagnosticsUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDiagnosticsUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environmental data of the device and connected parts" ::= {snMspsDiagnostics 3} snMspsDiagnosticsUsageEntry OBJECT-TYPE SYNTAX SnMspsDiagnosticsUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that contain usage data of one part of the device" INDEX { snMspsDiagnosticsUsageIndex } ::= { snMspsDiagnosticsUsageTable 1} SnMspsDiagnosticsUsageEntry::= SEQUENCE { snMspsDiagnosticsUsageIndex Integer32, snMspsDiagnosticsUsagePresent TruthValue, snMspsDiagnosticsUsageName SnmpAdminString, snMspsDiagnosticsUsageStatus INTEGER, snMspsDiagnosticsUsageValue Integer32, snMspsDiagnosticsUsageHighWarning Integer32, snMspsDiagnosticsUsageHighCritical Integer32 } snMspsDiagnosticsUsageIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Index variable" ::= { snMspsDiagnosticsUsageEntry 1 } snMspsDiagnosticsUsagePresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the part is present" ::= { snMspsDiagnosticsUsageEntry 4 } snMspsDiagnosticsUsageName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Original part description" ::= { snMspsDiagnosticsUsageEntry 7 } snMspsDiagnosticsUsageStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), warning(2), critical(3), invalid(4), initial(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the usage values read from the part ok(1): No threshold is violated warning(2): The warning threshold is violated critical(3): The critical threshold is violated invalid(4): Reading the environmental data failed initial(5): No data environmental data was read yet" ::= { snMspsDiagnosticsUsageEntry 10 } snMspsDiagnosticsUsageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current load/usage value of the part" ::= { snMspsDiagnosticsUsageEntry 13 } snMspsDiagnosticsUsageHighWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Warning threshold for the load/usage of the part. There will be a warning if SnMspsDiagnosticsUsageValue exceeds this value" ::= { snMspsDiagnosticsUsageEntry 16 } snMspsDiagnosticsUsageHighCritical OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Critical threshold for the load/usage of the part. There will be an alert if SnMspsDiagnosticsUsageValue exceeds this value" ::= { snMspsDiagnosticsUsageEntry 19 } snMspsDiagnosticsTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF SnMspsDiagnosticsTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environmental data of the device and connected parts" ::= { snMspsDiagnostics 7} snMspsDiagnosticsTemperatureEntry OBJECT-TYPE SYNTAX SnMspsDiagnosticsTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that contain temperature data of one part of the device" INDEX { snMspsDiagnosticsTemperatureIndex } ::= {snMspsDiagnosticsTemperatureTable 1} SnMspsDiagnosticsTemperatureEntry ::= SEQUENCE { snMspsDiagnosticsTemperatureIndex Integer32, snMspsDiagnosticsTemperaturePresent TruthValue, snMspsDiagnosticsTemperatureName SnmpAdminString, snMspsDiagnosticsTemperatureStatus INTEGER, snMspsDiagnosticsTemperatureSensorStatus Integer32, snMspsDiagnosticsTemperatureValue Integer32, snMspsDiagnosticsTemperatureType Integer32, snMspsDiagnosticsTemperatureScale Integer32, snMspsDiagnosticsTemperaturePrecision Integer32, snMspsDiagnosticsTemperatureUnitsDisplay SnmpAdminString, snMspsDiagnosticsTemperatureTimeStamp Unsigned32, snMspsDiagnosticsTemperatureUpdateRate Unsigned32, snMspsDiagnosticsTemperatureHighWarning Integer32, snMspsDiagnosticsTemperatureHighCritical Integer32, snMspsDiagnosticsTemperatureLowWarning Integer32, snMspsDiagnosticsTemperatureLowCritical Integer32 } snMspsDiagnosticsTemperatureIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Index variable" ::= { snMspsDiagnosticsTemperatureEntry 1 } snMspsDiagnosticsTemperaturePresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if a temperature value for the part is available" ::= { snMspsDiagnosticsTemperatureEntry 4 } snMspsDiagnosticsTemperatureName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Original part description" ::= { snMspsDiagnosticsTemperatureEntry 7 } snMspsDiagnosticsTemperatureStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), warning(2), critical(3), invalid(4), initial(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the temperature read from the part ok(1): No threshold is violated warning(2): The warning threshold is violated critical(3): The critical threshold is violated invalid(4): Reading the environmental data failed initial(5): No data environmental data was read yet" ::= { snMspsDiagnosticsTemperatureEntry 10 } snMspsDiagnosticsTemperatureSensorStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the temperature sensor of the part" ::= { snMspsDiagnosticsTemperatureEntry 13 } snMspsDiagnosticsTemperatureValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current temperature of the part" ::= { snMspsDiagnosticsTemperatureEntry 16 } snMspsDiagnosticsTemperatureType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stub for later ENTITY-SENSOR-MIB use; will always return 8 which stands for temperature in celsius" ::= { snMspsDiagnosticsTemperatureEntry 19 } snMspsDiagnosticsTemperatureScale OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stub for later ENTITY-SENSOR-MIB; will always return 8 which stands for celsius" ::= { snMspsDiagnosticsTemperatureEntry 22 } snMspsDiagnosticsTemperaturePrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stub for later ENTITY-MIB-use; will allways return 9 which stands for units" ::= { snMspsDiagnosticsTemperatureEntry 25 } snMspsDiagnosticsTemperatureUnitsDisplay OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Stub for later ENTITY-SENSOR-MIB use" ::= { snMspsDiagnosticsTemperatureEntry 28 } snMspsDiagnosticsTemperatureTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp containing the last time a temperature measurement was taken" ::= { snMspsDiagnosticsTemperatureEntry 31 } snMspsDiagnosticsTemperatureUpdateRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interval between two measurements in seconds. Zero means, that an update has to be triggered manually" ::= { snMspsDiagnosticsTemperatureEntry 34 } snMspsDiagnosticsTemperatureHighWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue exceeds this value" ::= { snMspsDiagnosticsTemperatureEntry 37 } snMspsDiagnosticsTemperatureHighCritical OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue exceeds this value" ::= { snMspsDiagnosticsTemperatureEntry 40 } snMspsDiagnosticsTemperatureLowWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue falls below this value" ::= { snMspsDiagnosticsTemperatureEntry 43 } snMspsDiagnosticsTemperatureLowCritical OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue falls below this value" ::= { snMspsDiagnosticsTemperatureEntry 46 } -- ----------------------------------------------------------------- -- END OF ENV_DATA_DIAGNOSTICS Table -- ----------------------------------------------------------------- END