MPLS-TC-EXT-STD-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, Unsigned32
      FROM SNMPv2-SMI               -- RFC 2578

   TEXTUAL-CONVENTION
      FROM SNMPv2-TC                -- RFC 2579

   mplsStdMIB
      FROM MPLS-TC-STD-MIB          -- RFC 3811

   ;

mplsTcExtStdMIB MODULE-IDENTITY

   LAST-UPDATED
      "201502020000Z" -- February 2, 2015
   ORGANIZATION
      "Multiprotocol Label Switching (MPLS) Working Group"
   CONTACT-INFO
      "
             Venkatesan Mahalingam
             Dell Inc,
             5450 Great America Parkway,
             Santa Clara, CA 95054, USA
       Email: venkat.mahalingams@gmail.com

             Kannan KV Sampath
             Redeem,
             India
       Email: kannankvs@gmail.com

             Sam Aldrin
             Huawei Technologies
             2330 Central Express Way,
             Santa Clara, CA 95051, USA
       Email:  aldrin.ietf@gmail.com

             Thomas D. Nadeau
       Email: tnadeau@lucidvision.com
      "
   DESCRIPTION
      "This MIB module contains Textual Conventions for LSPs of MPLS-
       based transport networks.

       Copyright (c) 2015 IETF Trust and the persons identified as
       authors of the code.  All rights reserved.

       Redistribution and use in source and binary forms, with or
       without modification, is permitted pursuant to, and subject to
       the license terms contained in, the Simplified BSD License set
       forth in Section 4.c of the IETF Trust's Legal Provisions
       Relating to IETF Documents
       (http://trustee.ietf.org/license-info)."

   -- Revision history.

   REVISION
      "201502020000Z" -- February 2, 2015
   DESCRIPTION
        "MPLS Textual Convention Extensions"
   ::= { mplsStdMIB 17 }

MplsGlobalId ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
        "This object contains the Textual Convention for an IP-based
         operator-unique identifier (Global_ID).  The Global_ID can
         contain the 2-octet or 4-octet value of the operator's
         Autonomous System Number (ASN).

         When the Global_ID is derived from a 2-octet ASN,
         the two high-order octets of this 4-octet identifier
         MUST be set to zero (0x00).  Further, ASN 0 is reserved.
         The size of the Global_ID string MUST be zero if
         the Global_ID is invalid.

         Note that a Global_ID of zero is limited to entities
         contained within a single operator and MUST NOT be used
         across a Network-to-Network Interface (NNI).  A non-zero
         Global_ID MUST be derived from an ASN owned by
         the operator."
   REFERENCE
        "MPLS Transport Profile (MPLS-TP) Identifiers, RFC 6370,
         Section 3"
   SYNTAX  OCTET STRING (SIZE (4))

MplsCcId ::= TEXTUAL-CONVENTION
STATUS      current
DESCRIPTION
     "The CC (Country Code) is a string of two characters, each
      being an uppercase Basic Latin alphabetic (i.e., A-Z).

      The characters are encoded using ITU-T Recommendation T.50.
      The size of the CC string MUST be zero if the CC identifier
      is invalid."
REFERENCE
     "MPLS-TP Identifiers Following ITU-T Conventions,
      RFC 6923, Section 3.
      International Reference Alphabet (IRA) (Formerly
      International Alphabet No. 5 or IA5) - Information
      technology - 7-bit coded character set for information
      exchange, ITU-T Recommendation T.50, September 1992."
SYNTAX  OCTET STRING (SIZE (0|2))

MplsIccId ::= TEXTUAL-CONVENTION
STATUS      current
DESCRIPTION
     "The ICC is a string of one to six characters, each
      an uppercase Basic Latin alphabetic (i.e., A-Z) or
      numeric (i.e., 0-9).  The characters are encoded
      using ITU-T Recommendation T.50.  The size of
      the ICC string MUST be zero if the ICC identifier
      is invalid."
REFERENCE
     "MPLS-TP Identifiers Following ITU-T Conventions,
      RFC 6923, Section 3.
      International Reference Alphabet (IRA) (Formerly
      International Alphabet No. 5 or IA5) - Information
      technology - 7-bit coded character set for information
      exchange, ITU-T Recommendation T.50, September 1992."
SYNTAX  OCTET STRING (SIZE (0|1..6))

MplsNodeId ::= TEXTUAL-CONVENTION
   DISPLAY-HINT "d"
   STATUS      current
   DESCRIPTION
       "The Node_ID is assigned within the scope of
        the Global_ID/ICC_Operator_ID.

        When IPv4 addresses are in use, the value of this object
        can be derived from the LSR's IPv4 loopback address.
        When IPv6 addresses are in use, the value of this object
        can be a 32-bit value unique within the scope of
        a Global_ID.

        Note that, when IP reachability is not needed, the 32-bit
        Node_ID is not required to have any association
        with the IPv4 address space.  The value of 0 indicates
        an invalid Node_ID."
   REFERENCE
        "MPLS Transport Profile (MPLS-TP) Identifiers, RFC 6370,
         Section 4"
   SYNTAX  Unsigned32 (0|1..4294967295)

  -- MPLS-TC-EXT-STD-MIB module ends
  END