AVAYA-WLAN-MOB-SW-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32, Counter64 FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB VlanIdOrNone, PortList FROM Q-BRIDGE-MIB CounterBasedGauge64 FROM HCNUM-TC avayaWlanMibs FROM SYNOPTICS-ROOT-MIB; avayaWlanMobSwMib MODULE-IDENTITY LAST-UPDATED "201006090000Z" -- 9 June 2010 ORGANIZATION "Avaya" CONTACT-INFO "Avaya" DESCRIPTION "Avaya WLAN Mobility Switch MIB Copyright 2010 Avaya, Inc. All rights reserved. This Avaya SNMP Management Information Base Specification (Specification) embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201003300000Z" -- 30 Mar 2010 DESCRIPTION "v1: Initial version." ::= { avayaWlanMibs 10 } avWlanMobSwObjects OBJECT IDENTIFIER ::= { avayaWlanMobSwMib 1 } -- =========================================================================== -- Groups -- =========================================================================== avWlanMobAgentObjects OBJECT IDENTIFIER ::= { avWlanMobSwObjects 1 } -- ============================================================================ -- avWlanMobAgentVlanTable -- ============================================================================ avWlanMobAgentVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobAgentVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the configuration table for mobility VLANs." ::= { avWlanMobAgentObjects 1 } avWlanMobAgentVlanEntry OBJECT-TYPE SYNTAX AvWlanMobAgentVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration settings for a mobility VLAN." INDEX { IMPLIED avWlanMobAgentVlanName } ::= { avWlanMobAgentVlanTable 1 } AvWlanMobAgentVlanEntry ::= SEQUENCE { avWlanMobAgentVlanName SnmpAdminString, avWlanMobAgentVlanLVID VlanIdOrNone, avWlanMobAgentVlanL3Mobility INTEGER, avWlanMobAgentVlanWeight Unsigned32, avWlanMobAgentVlanTrack PortList, avWlanMobAgentVlanScope INTEGER, avWlanMobAgentVlanWcValidated TruthValue, avWlanMobAgentVlanAdminMapped TruthValue, avWlanMobAgentVlanActive TruthValue, avWlanMobAgentVlanRowStatus RowStatus } avWlanMobAgentVlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a mobility VLAN." ::= { avWlanMobAgentVlanEntry 1 } avWlanMobAgentVlanLVID OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The local VLAN ID. This maps the global VLAN to a locally defined VLAN." ::= { avWlanMobAgentVlanEntry 2 } avWlanMobAgentVlanL3Mobility OBJECT-TYPE SYNTAX INTEGER { none(1), server(2), client(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the L3 mobility mode for the VLAN. The meaning of the values is: none(1) - L3 mobility is not enabled for this VLAN (L2 mobility is supported, which is the default behaviour when a VLAN is mapped). server(2) - L3 mobility is enabled for this VLAN, and this switch can act as a server for this mobility VLAN. The rest of the parameters for the VLAN are valid. client(3) - L3 mobility is enabled for this VLAN, and this switch is configured as a static client for this VLAN. All ports in the mapped Local VLAN will be remotely connected to this mobility VLAN." DEFVAL { none } ::= { avWlanMobAgentVlanEntry 3 } avWlanMobAgentVlanWeight OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a weight value to be used to compute the priority used to determine the winning server amongst a number of switches configured as server for this VLAN." DEFVAL { 1 } ::= { avWlanMobAgentVlanEntry 4 } avWlanMobAgentVlanTrack OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The objects specifies a list of ports whose status will be tracked to determine the priority used to elect the VLAN server for this VLAN. This list must be a subset of the member ports of the local VLAN mapped to this mobility VLAN. The default value for this object is the complete set of member ports of the local VLAN." ::= { avWlanMobAgentVlanEntry 5 } avWlanMobAgentVlanScope OBJECT-TYPE SYNTAX INTEGER { domain(1), enterprise(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "for future use" DEFVAL { domain } ::= { avWlanMobAgentVlanEntry 6 } avWlanMobAgentVlanWcValidated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Mobility VLAN name for this entry was received from (and thus validated by) the managing controller. Mostly useful for validating mappings that were manually added offline before the switch associated to the controller." ::= { avWlanMobAgentVlanEntry 7 } avWlanMobAgentVlanAdminMapped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LVID mapping for this entry was set by admin or auto-assigned by the switch itself. Has no meaning if the LVID value is 0" ::= { avWlanMobAgentVlanEntry 8 } avWlanMobAgentVlanActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LVID mapping is in 'Active' state. For mapping to be 'Active', the following conditions have to be satisfied: - Mobility VLAN has to be received from (validated by) WC. - LVID element has to be mapped a value other than 0. - LVID has to represent a valid local VLAN on this switch." ::= { avWlanMobAgentVlanEntry 9 } avWlanMobAgentVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete entries in the table. Only the entries manually added offline that have not (yet) been 'validated' by the managing Controller can be deleted from this table." ::= { avWlanMobAgentVlanEntry 10 } -- ===================================================================== -- avWlanMobSwScalars -- ===================================================================== avWlanMobSwScalars OBJECT IDENTIFIER ::= { avWlanMobSwObjects 2 } avWlanMobSwVLANPeriodicAdvInterval OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Period for sending VLAN advertisements." DEFVAL { 30 } ::= { avWlanMobSwScalars 1 } avWlanMobSwVMMMaxRetransmits OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VMM max retransmits." DEFVAL { 3 } ::= { avWlanMobSwScalars 2 } avWlanMobSwKeepAliveInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Keep alive interval." DEFVAL { 3000 } ::= { avWlanMobSwScalars 3 } avWlanMobSwKeepAliveNumRetries OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Kepp alive number of retries." DEFVAL { 5 } ::= { avWlanMobSwScalars 4 } avWlanMobSwTransMaxRetransmits OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Trans max retransmits." DEFVAL { 3 } ::= { avWlanMobSwScalars 5 } avWlanMobSwLocalDeviceId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the MAC address that uniquely identifies the local mobility switch. This value is what is used to identify this switch in peer switches and controllers, and is used as an index value in various MIBs to identify entries that pertain to the local switch." ::= { avWlanMobSwScalars 6 } avWlanMobSwAllStatisticsReset OBJECT-TYPE SYNTAX INTEGER { none(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When we set this object to reset, all the statistics for every tunnel will be cleared. Read on this object will always return none." ::= { avWlanMobSwScalars 7 } avWlanMobSwAllStatisticsResetStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), requested(2), inProgress(3), success(4), partialSuccess(5), failure(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the switch statistics reset request. Default value is not started." ::= {avWlanMobSwScalars 8} avWlanMobSwCtrlAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of internet address contained in the corresponding instance of avWlanMobSwCtrlAddr. Currently only ipv4(1) and ipv6(2) are allowed." ::= { avWlanMobSwScalars 9 } avWlanMobSwCtrlAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The System internet address of the controller that is managing this mobility switch. The type of address contained in this object is indicated by the corresponding instance of avWlanMobSwCtrlAddrType." ::= { avWlanMobSwScalars 10 } avWlanMobSwNumMobilityTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Mobility tunnels establisted on this switch." ::= { avWlanMobSwScalars 11 } avWlanMobSwNumAccessTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Access tunnels establisted on this switch." ::= { avWlanMobSwScalars 12 } avWlanMobSwNumResPeerAccessTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Access tunnels establisted on this switch that are managed by its resiliency peer. Initially intended for switches running as SMLT pairs." ::= { avWlanMobSwScalars 13 } avWlanMobSwFdbGlobalFlushAction OBJECT-TYPE SYNTAX INTEGER { none(1), flushAll(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When we set this object to flushAll(2), all the FDB entries learned by mobility switch will be flushed. Read on this object will always return none." ::= { avWlanMobSwScalars 14 } avWlanMobSwFdbGlobalFlushActionStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), success(3), partialFailure(4), failure(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of flushing all fdb entries learned by the mobility swithc request. Default value is not started." ::= {avWlanMobSwScalars 15} avWlanMobSwPurgeInactiveMaps OBJECT-TYPE SYNTAX INTEGER { none(1), purge(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object would purge all the inactive mappings from the mobility agent vlan table (avWlanMobAgentVlanTable) ie entries whose value of avWlanMobAgentVlanActive is False. Read from this field always returns none (1)." ::= { avWlanMobSwScalars 16 } -- ============================================================================ -- avWlanMobSwDeviceTable -- ============================================================================ avWlanMobSwDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobSwDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Despite the somewhat misleading name, this table contains status entries of the Access and Mobility tunnels that are established at the local switch." ::= { avWlanMobSwObjects 3 } avWlanMobSwDeviceEntry OBJECT-TYPE SYNTAX AvWlanMobSwDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A peer mobility switch or an access point." INDEX { avWlanMobSwDeviceType, avWlanMobSwDeviceId } ::= { avWlanMobSwDeviceTable 1 } AvWlanMobSwDeviceEntry ::= SEQUENCE { avWlanMobSwDeviceType INTEGER, avWlanMobSwDeviceId MacAddress, avWlanMobSwDeviceAddrType InetAddressType, avWlanMobSwDeviceAddr InetAddress, avWlanMobSwDeviceUdpPort InetPortNumber, avWlanMobSwDeviceStatus INTEGER, avWlanMobSwDeviceLocalUdpPort InetPortNumber, avWlanMobSwDeviceInterfaceId Integer32 } avWlanMobSwDeviceType OBJECT-TYPE SYNTAX INTEGER { mobTunnel(1), accessTunnel(2), resPeerAccessTunnel(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tunnel type." ::= { avWlanMobSwDeviceEntry 1 } avWlanMobSwDeviceId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel." ::= { avWlanMobSwDeviceEntry 2 } avWlanMobSwDeviceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of internet address in the corresponding instance of avWlanMobSwDeviceAddr. Currently, only the values ipv4(1) and ipv6(2) are allowed." ::= { avWlanMobSwDeviceEntry 3 } avWlanMobSwDeviceAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the peer mobility switch or access point. The type of address is indicated by the corresponding instance of avWlanMobSwDeviceAddrType." ::= { avWlanMobSwDeviceEntry 4 } avWlanMobSwDeviceUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UDP port which the peer mobility switch or access point will use for control protocol communication with the local switch." ::= { avWlanMobSwDeviceEntry 5 } avWlanMobSwDeviceStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the mobility tunnel connection to this peer mobility switch, or the access tunnel to this access point." ::= { avWlanMobSwDeviceEntry 6 } avWlanMobSwDeviceLocalUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the local UDP port through which the current Mobility Tunnel(or Resiliency Tunnel) or Access Tunnel is connected." ::= { avWlanMobSwDeviceEntry 7 } avWlanMobSwDeviceInterfaceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used to display Logical Port for the tunnel." ::= { avWlanMobSwDeviceEntry 8 } -- ============================================================================ -- avWlanMobPeerVlansAdvertisedTable -- ============================================================================ avWlanMobPeerVlansAdvertisedTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobPeerVlansAdvertisedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of the Mobility VLANs that are advertised by each peer Mobility Switch with which the local mobility switch has established a mobility tunnel." ::= { avWlanMobSwObjects 4 } avWlanMobPeerVlansAdvertisedEntry OBJECT-TYPE SYNTAX AvWlanMobPeerVlansAdvertisedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mobility vlan advertised by a peer mobility switch." INDEX { avWlanMobPeerVlansAdvertisedId, IMPLIED avWlanMobPeerVlansAdvertisedVlanName } ::= { avWlanMobPeerVlansAdvertisedTable 1 } AvWlanMobPeerVlansAdvertisedEntry ::= SEQUENCE { avWlanMobPeerVlansAdvertisedId MacAddress, avWlanMobPeerVlansAdvertisedVlanName SnmpAdminString, avWlanMobPeerVlansAdvertisedPriority Unsigned32 } avWlanMobPeerVlansAdvertisedId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address that uniquely identifies the peer mobility switch." ::= { avWlanMobPeerVlansAdvertisedEntry 1 } avWlanMobPeerVlansAdvertisedVlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the advertised mobility VLAN." ::= { avWlanMobPeerVlansAdvertisedEntry 2 } avWlanMobPeerVlansAdvertisedPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority of the advertised mobility VLAN." ::= { avWlanMobPeerVlansAdvertisedEntry 3 } -- ============================================================================ -- avWlanMobVlanServerTable -- ============================================================================ avWlanMobVlanServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobVlanServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the currently selected server for each mobility vlan." ::= { avWlanMobSwObjects 5 } avWlanMobVlanServerEntry OBJECT-TYPE SYNTAX AvWlanMobVlanServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mobility vlan advertised by a peer mobility switch." INDEX { IMPLIED avWlanMobVlanServerVlanName } ::= { avWlanMobVlanServerTable 1 } AvWlanMobVlanServerEntry ::= SEQUENCE { avWlanMobVlanServerVlanName SnmpAdminString, avWlanMobVlanServerId MacAddress, avWlanMobVlanServerPriority Unsigned32 } avWlanMobVlanServerVlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the mobility vlan." ::= { avWlanMobVlanServerEntry 1 } avWlanMobVlanServerId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the currently selected server for this mobility vlan. Note that the internet address and status of this server can be retrieved from the corresponding entry in the avWlanMobSwDeviceTable." ::= { avWlanMobVlanServerEntry 2 } avWlanMobVlanServerPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority of the VLAN." ::= { avWlanMobVlanServerEntry 3 } -- ===================================================================== -- avWlanMobVlanPeerAdvertiserTable -- ===================================================================== avWlanMobVlanPeerAdvertiserTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobVlanPeerAdvertiserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of all peer mobility switches that are advertising each mobility vlan." ::= { avWlanMobSwObjects 6 } avWlanMobVlanPeerAdvertiserEntry OBJECT-TYPE SYNTAX AvWlanMobVlanPeerAdvertiserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mobility switch that is advertising a particular mobility vlan." INDEX { avWlanMobVlanPeerAdvertiserVlanName, avWlanMobVlanPeerAdvertiserId } ::= { avWlanMobVlanPeerAdvertiserTable 1 } AvWlanMobVlanPeerAdvertiserEntry ::= SEQUENCE { avWlanMobVlanPeerAdvertiserVlanName SnmpAdminString, avWlanMobVlanPeerAdvertiserId MacAddress, avWlanMobVlanPeerAdvertiserPriority Unsigned32 } avWlanMobVlanPeerAdvertiserVlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the mobility vlan." ::= { avWlanMobVlanPeerAdvertiserEntry 1 } avWlanMobVlanPeerAdvertiserId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a peer mobility switch that is advertising this mobility vlan. Note that the internet address and status of this peer can be retrieved from the corresponding entry in the avWlanMobSwDeviceTable." ::= { avWlanMobVlanPeerAdvertiserEntry 2 } avWlanMobVlanPeerAdvertiserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority of the VLAN." ::= { avWlanMobVlanPeerAdvertiserEntry 3 } -- ============================================================================ -- avWlanMobTunnelStatsTable -- ============================================================================ avWlanMobTunnelStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobTunnelStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains statistics for each mobility tunnel." ::= { avWlanMobSwObjects 7 } avWlanMobTunnelStatsEntry OBJECT-TYPE SYNTAX AvWlanMobTunnelStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "mobility/access tunnel statistics" INDEX { avWlanMobTunnelStatsDeviceId } ::= { avWlanMobTunnelStatsTable 1 } AvWlanMobTunnelStatsEntry ::= SEQUENCE { avWlanMobTunnelStatsDeviceId MacAddress, avWlanMobTunnelStatsIngressPkts Counter64, avWlanMobTunnelStatsIngressMcast Counter64, avWlanMobTunnelStatsIngressBcast Counter64, avWlanMobTunnelStatsIngressOctets Counter64, avWlanMobTunnelStatsIngressError Counter64, avWlanMobTunnelStatsIngressDropped Counter64, avWlanMobTunnelStatsIngressPkts64 Counter64, avWlanMobTunnelStatsIngressPkts65to127 Counter64, avWlanMobTunnelStatsIngressPkts128to255 Counter64, avWlanMobTunnelStatsIngressPkts256to511 Counter64, avWlanMobTunnelStatsIngressPkts512to1023 Counter64, avWlanMobTunnelStatsIngressPkts1024to1518 Counter64, avWlanMobTunnelStatsIngressPkts1522to9216 Counter64, avWlanMobTunnelStatsIngressFragments Counter64, avWlanMobTunnelStatsIngressFragmentsDrop Counter64, avWlanMobTunnelStatsIngressKeepAliveReq Counter64, avWlanMobTunnelStatsIngressKeepAliveRsp Counter64, avWlanMobTunnelStatsIngressDataRate CounterBasedGauge64, avWlanMobTunnelStatsEgressPkts Counter64, avWlanMobTunnelStatsEgressMcast Counter64, avWlanMobTunnelStatsEgressBcast Counter64, avWlanMobTunnelStatsEgressOctets Counter64, avWlanMobTunnelStatsEgressError Counter64, avWlanMobTunnelStatsEgressDropped Counter64, avWlanMobTunnelStatsEgressPkts64 Counter64, avWlanMobTunnelStatsEgressPkts65to127 Counter64, avWlanMobTunnelStatsEgressPkts128to255 Counter64, avWlanMobTunnelStatsEgressPkts256to511 Counter64, avWlanMobTunnelStatsEgressPkts512to1023 Counter64, avWlanMobTunnelStatsEgressPkts1024to1518 Counter64, avWlanMobTunnelStatsEgressPkts1522to9216 Counter64, avWlanMobTunnelStatsEgressFragments Counter64, avWlanMobTunnelStatsEgressKeepAliveReq Counter64, avWlanMobTunnelStatsEgressKeepAliveRsp Counter64, avWlanMobTunnelStatsEgressDataRate CounterBasedGauge64, avWlanMobTunnelStatsReset INTEGER } avWlanMobTunnelStatsDeviceId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object identifies the peer mobility switch to which this tunnel is connected." ::= { avWlanMobTunnelStatsEntry 1 } avWlanMobTunnelStatsIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets received on the tunnel." ::= { avWlanMobTunnelStatsEntry 2 } avWlanMobTunnelStatsIngressMcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Multicast packets recvd on the tunnel." ::= { avWlanMobTunnelStatsEntry 3 } avWlanMobTunnelStatsIngressBcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Broadcasts recvd on the tunnel." ::= { avWlanMobTunnelStatsEntry 4 } avWlanMobTunnelStatsIngressOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total octets recvd on the tunnel." ::= { avWlanMobTunnelStatsEntry 5 } avWlanMobTunnelStatsIngressError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets with errors recvd on tunnel." ::= { avWlanMobTunnelStatsEntry 6 } avWlanMobTunnelStatsIngressDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets that were dropped by ingress processing - e.g. incorrect vlan or WDP disabled or rate limited." ::= { avWlanMobTunnelStatsEntry 7 } avWlanMobTunnelStatsIngressPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 64 byte packets received on tunnel." ::= { avWlanMobTunnelStatsEntry 8 } avWlanMobTunnelStatsIngressPkts65to127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 65 byte to 127 byte packets received on the tunnel." ::= { avWlanMobTunnelStatsEntry 9 } avWlanMobTunnelStatsIngressPkts128to255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 128 byte to 255 byte packets recvd." ::= { avWlanMobTunnelStatsEntry 10 } avWlanMobTunnelStatsIngressPkts256to511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 256 byte to 511 byte packets recvd." ::= { avWlanMobTunnelStatsEntry 11 } avWlanMobTunnelStatsIngressPkts512to1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 512 byte to 1023 byte packets recvd." ::= { avWlanMobTunnelStatsEntry 12 } avWlanMobTunnelStatsIngressPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of 1024 byte to 1518 byte packets recvd." ::= { avWlanMobTunnelStatsEntry 13 } avWlanMobTunnelStatsIngressPkts1522to9216 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Jumbo frames ingressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 14 } avWlanMobTunnelStatsIngressFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total CAPWAP fragments ingressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 15 } avWlanMobTunnelStatsIngressFragmentsDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of CAPWAP fragments dropped because they could not be re-assembled." ::= { avWlanMobTunnelStatsEntry 16 } avWlanMobTunnelStatsIngressKeepAliveReq OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total keep alive requests received on this tunnel." ::= { avWlanMobTunnelStatsEntry 17 } avWlanMobTunnelStatsIngressKeepAliveRsp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total keep alive responses received on this tunnel." ::= { avWlanMobTunnelStatsEntry 18 } avWlanMobTunnelStatsIngressDataRate OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bits/seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Data rate of ingress traffic over the past second." ::= { avWlanMobTunnelStatsEntry 19 } avWlanMobTunnelStatsEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 20 } avWlanMobTunnelStatsEgressMcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Multicast packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 21 } avWlanMobTunnelStatsEgressBcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Broadcast packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 22 } avWlanMobTunnelStatsEgressOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total octets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 23 } avWlanMobTunnelStatsEgressError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets with errors sent on tunnel." ::= { avWlanMobTunnelStatsEntry 24 } avWlanMobTunnelStatsEgressDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total packets dropped on the egress due to e.g. rate limiting or vlan filtering." ::= { avWlanMobTunnelStatsEntry 25 } avWlanMobTunnelStatsEgressPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 64 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 26 } avWlanMobTunnelStatsEgressPkts65to127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 65 byte to 127 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 27 } avWlanMobTunnelStatsEgressPkts128to255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 128 byte to 255 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 28 } avWlanMobTunnelStatsEgressPkts256to511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 256 byte to 511 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 29 } avWlanMobTunnelStatsEgressPkts512to1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 512 byte to 1023 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 30 } avWlanMobTunnelStatsEgressPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total 1024 byte to 1518 byte packets egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 31 } avWlanMobTunnelStatsEgressPkts1522to9216 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Jumbo frame egressing on the tunnel." ::= { avWlanMobTunnelStatsEntry 32 } avWlanMobTunnelStatsEgressFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total number of CAPWAP fragments transmitted." ::= { avWlanMobTunnelStatsEntry 33 } avWlanMobTunnelStatsEgressKeepAliveReq OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total keep alive requests transmitted from this tunnel." ::= { avWlanMobTunnelStatsEntry 34 } avWlanMobTunnelStatsEgressKeepAliveRsp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total keep alive responses transmitted from this tunnel." ::= { avWlanMobTunnelStatsEntry 35 } avWlanMobTunnelStatsEgressDataRate OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bits/seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Data rate of egress traffic over the past second." ::= { avWlanMobTunnelStatsEntry 36 } avWlanMobTunnelStatsReset OBJECT-TYPE SYNTAX INTEGER { none(1), reset(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1)." ::= { avWlanMobTunnelStatsEntry 37 } -- ============================================================================ -- avWlanMobSwTunnelStatisticsTable -- ============================================================================ avWlanMobSwTunnelStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobSwTunnelStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics for each mobility/access tunnel." ::= { avWlanMobSwObjects 8 } avWlanMobSwTunnelStatisticsEntry OBJECT-TYPE SYNTAX AvWlanMobSwTunnelStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contain statistics available for each mobility/access tunnel established at the switch." INDEX { avWlanMobSwDeviceType, avWlanMobSwDeviceId } ::= { avWlanMobSwTunnelStatisticsTable 1 } AvWlanMobSwTunnelStatisticsEntry ::= SEQUENCE { avWlanMobSwTunnelIngressPkts Counter64, avWlanMobSwTunnelIngressMcast Counter64, avWlanMobSwTunnelIngressBcast Counter64, avWlanMobSwTunnelIngressOctets Counter64, avWlanMobSwTunnelIngressError Counter64, avWlanMobSwTunnelIngressDropped Counter64, avWlanMobSwTunnelIngressPkts64 Counter64, avWlanMobSwTunnelIngressPkts65to127 Counter64, avWlanMobSwTunnelIngressPkts128to255 Counter64, avWlanMobSwTunnelIngressPkts256to511 Counter64, avWlanMobSwTunnelIngressPkts512to1023 Counter64, avWlanMobSwTunnelIngressPkts1024to1518 Counter64, avWlanMobSwTunnelIngressPkts1522to9216 Counter64, avWlanMobSwTunnelIngressFragments Counter64, avWlanMobSwTunnelIngressFragmentsDrop Counter64, avWlanMobSwTunnelIngressKeepAliveReq Counter64, avWlanMobSwTunnelIngressKeepAliveRsp Counter64, avWlanMobSwTunnelIngressDataRate CounterBasedGauge64, avWlanMobSwTunnelEgressPkts Counter64, avWlanMobSwTunnelEgressMcast Counter64, avWlanMobSwTunnelEgressBcast Counter64, avWlanMobSwTunnelEgressOctets Counter64, avWlanMobSwTunnelEgressError Counter64, avWlanMobSwTunnelEgressDropped Counter64, avWlanMobSwTunnelEgressPkts64 Counter64, avWlanMobSwTunnelEgressPkts65to127 Counter64, avWlanMobSwTunnelEgressPkts128to255 Counter64, avWlanMobSwTunnelEgressPkts256to511 Counter64, avWlanMobSwTunnelEgressPkts512to1023 Counter64, avWlanMobSwTunnelEgressPkts1024to1518 Counter64, avWlanMobSwTunnelEgressPkts1522to9216 Counter64, avWlanMobSwTunnelEgressFragments Counter64, avWlanMobSwTunnelEgressKeepAliveReq Counter64, avWlanMobSwTunnelEgressKeepAliveRsp Counter64, avWlanMobSwTunnelEgressDataRate CounterBasedGauge64, avWlanMobSwTunnelResetStats INTEGER, avWlanMobSwTunnelIpAddressType InetAddressType, avWlanMobSwTunnelIpAddress InetAddress, avWlanMobSwTunnelInterfaceId Integer32 } avWlanMobSwTunnelIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets received on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 1 } avWlanMobSwTunnelIngressMcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast packets recvd on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 2 } avWlanMobSwTunnelIngressBcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Broadcasts recvd on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 3 } avWlanMobSwTunnelIngressOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total octets recvd on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 4 } avWlanMobSwTunnelIngressError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets with errors recvd on tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 5 } avWlanMobSwTunnelIngressDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets that were dropped by ingress processing - e.g. incorrect vlan or WDP disabled or rate limited." ::= { avWlanMobSwTunnelStatisticsEntry 6 } avWlanMobSwTunnelIngressPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 64 byte packets received on tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 7 } avWlanMobSwTunnelIngressPkts65to127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 65 byte to 127 byte packets received on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 8 } avWlanMobSwTunnelIngressPkts128to255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 128 byte to 255 byte packets recvd." ::= { avWlanMobSwTunnelStatisticsEntry 9 } avWlanMobSwTunnelIngressPkts256to511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 256 byte to 511 byte packets recvd." ::= { avWlanMobSwTunnelStatisticsEntry 10 } avWlanMobSwTunnelIngressPkts512to1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 512 byte to 1023 byte packets recvd." ::= { avWlanMobSwTunnelStatisticsEntry 11 } avWlanMobSwTunnelIngressPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of 1024 byte to 1518 byte packets recvd." ::= { avWlanMobSwTunnelStatisticsEntry 12 } avWlanMobSwTunnelIngressPkts1522to9216 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Jumbo frames ingressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 13 } avWlanMobSwTunnelIngressFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CAPWAP fragments ingressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 14 } avWlanMobSwTunnelIngressFragmentsDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of CAPWAP fragments dropped because they could not be re-assembled." ::= { avWlanMobSwTunnelStatisticsEntry 15 } avWlanMobSwTunnelIngressKeepAliveReq OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total keep alive requests received on this tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 16 } avWlanMobSwTunnelIngressKeepAliveRsp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total keep alive responses received on this tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 17 } avWlanMobSwTunnelIngressDataRate OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bits/seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Data rate of ingress traffic over the past second." ::= { avWlanMobSwTunnelStatisticsEntry 18 } avWlanMobSwTunnelEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 19 } avWlanMobSwTunnelEgressMcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 20 } avWlanMobSwTunnelEgressBcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Broadcast packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 21 } avWlanMobSwTunnelEgressOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total octets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 22 } avWlanMobSwTunnelEgressError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets with errors sent on tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 23 } avWlanMobSwTunnelEgressDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packets dropped on the egress due to e.g. rate limiting or vlan filtering." ::= { avWlanMobSwTunnelStatisticsEntry 24 } avWlanMobSwTunnelEgressPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 64 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 25 } avWlanMobSwTunnelEgressPkts65to127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 65 byte to 127 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 26 } avWlanMobSwTunnelEgressPkts128to255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 128 byte to 255 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 27 } avWlanMobSwTunnelEgressPkts256to511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 256 byte to 511 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 28 } avWlanMobSwTunnelEgressPkts512to1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 512 byte to 1023 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 29 } avWlanMobSwTunnelEgressPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total 1024 byte to 1518 byte packets egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 30 } avWlanMobSwTunnelEgressPkts1522to9216 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Jumbo frame egressing on the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 31 } avWlanMobSwTunnelEgressFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of CAPWAP fragments transmitted." ::= { avWlanMobSwTunnelStatisticsEntry 32 } avWlanMobSwTunnelEgressKeepAliveReq OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total keep alive requests transmitted from this tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 33 } avWlanMobSwTunnelEgressKeepAliveRsp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total keep alive responses transmitted from this tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 34 } avWlanMobSwTunnelEgressDataRate OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bits/seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Data rate of egress traffic over the past second." ::= { avWlanMobSwTunnelStatisticsEntry 35 } avWlanMobSwTunnelResetStats OBJECT-TYPE SYNTAX INTEGER { none(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1)." ::= { avWlanMobSwTunnelStatisticsEntry 36 } avWlanMobSwTunnelIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of internet address in the corresponding instance of rcWlanMobSwTunnelIPAddress. Currently, only the values ipv4(1) and ipv6(2) are allowed." ::= { avWlanMobSwTunnelStatisticsEntry 37 } avWlanMobSwTunnelIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the IP address that will be used to display Wireless LAN switch tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 38} avWlanMobSwTunnelInterfaceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used to display Logical Port for the tunnel." ::= { avWlanMobSwTunnelStatisticsEntry 39 } -- ==================================================================== -- avWlanMobSwControllerTable -- ===================================================================== avWlanMobSwControllerTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobSwControllerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines System IPs of the Controllers for this switch. The controllers are used in the round robin fashion." ::= { avWlanMobSwObjects 9 } avWlanMobSwControllerEntry OBJECT-TYPE SYNTAX AvWlanMobSwControllerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing configuration information for a particular Controller." INDEX { avWlanMobSwControllerId } ::= { avWlanMobSwControllerTable 1 } AvWlanMobSwControllerEntry ::= SEQUENCE { avWlanMobSwControllerId Integer32, avWlanMobSwControllerAddrType InetAddressType, avWlanMobSwControllerAddr InetAddress, avWlanMobSwControllerRowStatus RowStatus } avWlanMobSwControllerId OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into the table." ::= { avWlanMobSwControllerEntry 1 } avWlanMobSwControllerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of internet address contained in the corresponding instance of avWlanMobSwControllerAddr. Currently only ipv4(1) and ipv6(2) are allowed." ::= { avWlanMobSwControllerEntry 2 } avWlanMobSwControllerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The internet address of the configured Controller IP address. The type of address contained in this object is indicated by the corresponding instance of avWlanMobSwControllerAddrType." ::= { avWlanMobSwControllerEntry 3 } avWlanMobSwControllerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete entries in the table." ::= { avWlanMobSwControllerEntry 4 } avWlanMobSwFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF AvWlanMobSwFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains FDB entries for wireless traffic." ::= { avWlanMobSwObjects 10 } avWlanMobSwFdbEntry OBJECT-TYPE SYNTAX AvWlanMobSwFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific unicast MAC address for which the mobility switch has forwarding information." INDEX { avWlanMobSwFdbVlanId , avWlanMobSwFdbMacAddress } ::= { avWlanMobSwFdbTable 1 } AvWlanMobSwFdbEntry ::= SEQUENCE { avWlanMobSwFdbVlanId VlanIdOrNone, avWlanMobSwFdbMacAddress MacAddress, avWlanMobSwFdbType INTEGER, avWlanMobSwFdbTunnelType INTEGER, avWlanMobSwFdbRemoteEndpointId MacAddress, avWlanMobSwFdbRemoteEndpointAddrType InetAddressType, avWlanMobSwFdbRemoteEndpointAddr InetAddress, avWlanMobSwFdbRemoteEndpointUdpPort InetPortNumber, avWlanMobSwFdbLocalEndpointUdpPort InetPortNumber, avWlanMobSwFdbInterfaceId Integer32, avWlanMobSwFdbFlushAction INTEGER } avWlanMobSwFdbVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local VLAN ID" ::= { avWlanMobSwFdbEntry 1 } avWlanMobSwFdbMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast MAC address for which the mobility switch has forwarding and/or filtering information." REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ::= { avWlanMobSwFdbEntry 2 } avWlanMobSwFdbType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), static(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of this entry other(1) - invalid(2) - learned(3) - self(4) - static(5) - " ::= { avWlanMobSwFdbEntry 3 } avWlanMobSwFdbTunnelType OBJECT-TYPE SYNTAX INTEGER { mobTunnel(1), accessTunnel(2), resPeerAccessTunnel(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the type of the tunnel the entry is learned on" ::= { avWlanMobSwFdbEntry 4 } avWlanMobSwFdbRemoteEndpointId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the FDB entry's remote end point." ::= { avWlanMobSwFdbEntry 5 } avWlanMobSwFdbRemoteEndpointAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of internet address of the FDB entry's remote end point ." ::= { avWlanMobSwFdbEntry 6 } avWlanMobSwFdbRemoteEndpointAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote end point(mobility switch or access point). The type of address is indicated by the corresponding instance of avWlanMobSwRemoteEndPointAddrType." ::= { avWlanMobSwFdbEntry 7 } avWlanMobSwFdbRemoteEndpointUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UDP port used by the remote end point of the tunnel." ::= { avWlanMobSwFdbEntry 8 } avWlanMobSwFdbLocalEndpointUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UDP port used by the local end point of the tunnel." ::= { avWlanMobSwFdbEntry 9 } avWlanMobSwFdbInterfaceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used to display Logical Port for the tunnel." ::= { avWlanMobSwFdbEntry 10 } avWlanMobSwFdbFlushAction OBJECT-TYPE SYNTAX INTEGER { none(1), flush(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to flush(2), the FDB entry learned by mobility switch will be flushed. Read on this object will always return none(1)." ::= { avWlanMobSwFdbEntry 11 } END