TN-SAS-PORT-MIB DEFINITIONS ::= BEGIN -- (c) Copyright 2021 Nokia Networks. All rights reserved. -- This software is the confidential and proprietary property of -- Nokia and may only be used in accordance with the terms of the -- license agreement provided with this software. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Integer32 FROM SNMPv2-SMI RowStatus, TimeStamp, TruthValue, MacAddress FROM SNMPv2-TC tnSASObjs, tnSASModules FROM TROPIC-GLOBAL-REG TmnxPortID, ServObjDesc, TNamedItemOrEmpty, TNetworkIngressMeterId, TNamedItem, TQueueId, TmnxServId, TmnxEncapVal FROM TN-TC-MIB tnPortEntry, tnPortPortID, tnPortEtherEntry FROM TN-PORT-MIB tnSysSwitchId FROM TROPIC-SYSTEM-MIB InterfaceIndexOrZero, ifEntry FROM IF-MIB ; tnSASPortMIBModule MODULE-IDENTITY LAST-UPDATED "202008280000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision the hardware components of the Nokia 7x50 device. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "202008280000Z" DESCRIPTION "1) Changed SYNTAX of the following from ServiceAdminStatus to INTEGER: tnPortSapEtherLLFAdminStatus. 2) Updated SYNTAX of the following: tnPortSapEtherLLFOperStatus." REVISION "201902150000Z" DESCRIPTION "Added the following to tnPortNetEgressQueueStatsTable: tnPortNetEgressQueueOperPIR tnPortNetEgressQueueOperCIR." REVISION "201811020000Z" DESCRIPTION "Added the following to tnSASPortEtherExtnTable: tnPortSapEtherLLFAdminStatus tnPortSapEtherLLFOperStatus tnPortSapEtherLLFId." REVISION "201712220000Z" DESCRIPTION "Updated range for the following: tnPortEtherEgressMaxBurst." REVISION "201711100000Z" DESCRIPTION "Updated range for the following: tnPortEtherEgressMaxBurst." REVISION "201702280000Z" DESCRIPTION "Added the following table: tnVirtualPortTable." REVISION "201603300000Z" DESCRIPTION "Added the following table: tnSASPortNetIngressStatsTable." REVISION "201511120000Z" DESCRIPTION "Added the following table: tnSASPssIfTable." REVISION "201509090000Z" DESCRIPTION "Added the following to tnSASPortEtherExtnTable: tnPortPtpEnable." REVISION "201501260000Z" DESCRIPTION "Added the following to tnSASPortEtherExtnTable: tnPortLldpTnlNrstBrdgeDstMac." REVISION "201209010000Z" DESCRIPTION "Changed the following index from read-only to not-accessible: tnIntervalNumber." REVISION "200801090000Z" DESCRIPTION "Rev 1.0 09 Jan 2008 00:00 This is the 1.0 release of the TIMETRA-SAS-GLOBAL-MIB." ::= { tnSASModules 6 } tnSASPortObjs OBJECT IDENTIFIER ::= { tnSASObjs 2 } -- tnSASPortNotificationObjects OBJECT IDENTIFIER ::= { tnSASObjs 3 } -- tnSASPortStatsObjs OBJECT IDENTIFIER ::= { tnSASObjs 4 } -- tnSASPortConformance OBJECT IDENTIFIER ::= { tnSASConfs 2 } tnPortShgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TnPortShgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port split-horizon group information. " ::= { tnSASPortObjs 6 } tnPortShgInfoEntry OBJECT-TYPE SYNTAX TnPortShgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Split-horizon group information about a TLS service." INDEX { tnSysSwitchId, IMPLIED tnPortShgName } ::= { tnPortShgInfoTable 1 } TnPortShgInfoEntry ::= SEQUENCE { tnPortShgName TNamedItem, tnPortShgRowStatus RowStatus, tnPortShgInstanceId Unsigned32, tnPortShgDescription ServObjDesc, tnPortShgLastMgmtChange TimeStamp } tnPortShgName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tnPortShgName specifies the name of the split-horizon group. " ::= { tnPortShgInfoEntry 1 } tnPortShgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tnPortShgRowStatus specifies the status of this row. The only values supported during a set operation are createAndGo(4) and destroy(6). To delete an entry from this table, there should be no port Bindings refering to it." ::= { tnPortShgInfoEntry 2 } tnPortShgInstanceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tnPortShgInstanceId indicates the instance identifier for the split horizon group." ::= { tnPortShgInfoEntry 3 } tnPortShgDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tnPortShgDescription specifies generic information about this split-horizon group." DEFVAL { "" } ::= { tnPortShgInfoEntry 4 } tnPortShgLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tnPortShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group." ::= { tnPortShgInfoEntry 5 } tnSASPortExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TnSASPortExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has additional information about the 7210 platforms" ::= { tnSASPortObjs 2 } tnSASPortExtnEntry OBJECT-TYPE SYNTAX TnSASPortExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tnPortEntries must be in the proper state for removal." AUGMENTS { tnPortEntry } ::= { tnSASPortExtnTable 1 } TnSASPortExtnEntry ::= SEQUENCE { tnPortUplinkMode TruthValue, tnPortAccessEgressQoSPolicyId Unsigned32, tnPortNetworkQoSPolicyId Unsigned32, tnPortShgGroupName TNamedItemOrEmpty } tnPortUplinkMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If the tnPortUplinkMode is set to true when the tnPortMode is set to 'access(1)' and the port acts as an uplink. tnPortEncaptype must also be configured 'qinqEncap' when using access port as uplink port." ::= { tnSASPortExtnEntry 1 } tnPortAccessEgressQoSPolicyId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Qos Policy ID for Access Egress Port" DEFVAL { 1 } ::= { tnSASPortExtnEntry 2 } tnPortNetworkQoSPolicyId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Network Policy ID " DEFVAL { 1 } ::= { tnSASPortExtnEntry 3 } tnPortShgGroupName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "Split horizon group to be attached to this port" ::= { tnSASPortExtnEntry 4 } -- -- Network Port Ingress Stats Table -- tnSASPortNetIngressStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TnSASPortNetIngressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAS series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical Meters being used for the ports to forward the network ingress traffic." ::= { tnSASPortObjs 3 } tnSASPortNetIngressStatsEntry OBJECT-TYPE SYNTAX TnSASPortNetIngressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in tnSASPortNetIngressStatsTable. Entries are created and deleted by the system depending on the meter policy being used at the specific port." INDEX { tnPortPortID, tnSASPortNetIngressMeterIndex } ::= { tnSASPortNetIngressStatsTable 1 } TnSASPortNetIngressStatsEntry ::= SEQUENCE { tnSASPortNetIngressMeterIndex TNetworkIngressMeterId, tnSASPortNetIngressFwdInProfPkts Counter64, tnSASPortNetIngressFwdOutProfPkts Counter64, tnSASPortNetIngressFwdInProfOcts Counter64, tnSASPortNetIngressFwdOutProfOcts Counter64 } tnSASPortNetIngressMeterIndex OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnSASPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed system." ::= { tnSASPortNetIngressStatsEntry 1 } tnSASPortNetIngressFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter." ::= { tnSASPortNetIngressStatsEntry 2 } tnSASPortNetIngressFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter." ::= { tnSASPortNetIngressStatsEntry 3 } tnSASPortNetIngressFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter." ::= { tnSASPortNetIngressStatsEntry 4 } tnSASPortNetIngressFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter." ::= { tnSASPortNetIngressStatsEntry 5 } -- -- Port Ethernet Extenstion Table -- tnSASPortEtherExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF SasTmnxPortEtherExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has additional information about the 7210 platforms" ::= { tnSASPortObjs 4 } tnSASPortEtherExtnEntry OBJECT-TYPE SYNTAX SasTmnxPortEtherExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM cardEntry can be deleted from the tmnxMDATable, its supported tnPortEntries and tnPortEtherEntries must be in the proper state for removal. The tnPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType." AUGMENTS { tnPortEtherEntry } ::= { tnSASPortEtherExtnTable 1 } SasTmnxPortEtherExtnEntry ::= SEQUENCE { tnPortEtherEgressMaxBurst Integer32, tnPortStatsQueue1PktsFwd TruthValue, tnPortStatsQueue2PktsFwd TruthValue, tnPortStatsQueue3PktsFwd TruthValue, tnPortStatsQueue4PktsFwd TruthValue, tnPortStatsQueue5PktsFwd TruthValue, tnPortStatsQueue6PktsFwd TruthValue, tnPortStatsQueue7PktsFwd TruthValue, tnPortStatsQueue8PktsFwd TruthValue, tnPortEtherEgrSchedMode INTEGER, tnPortEtherLoopback INTEGER, tnPortEtherIpMTU Unsigned32, tnPortEtherClockConfig INTEGER, tnPortLoopbckServId TmnxServId, tnPortLoopbckSapPortId InterfaceIndexOrZero, tnPortLoopbckSapEncapVal TmnxEncapVal, tnPortLoopbckSrcMacAddr MacAddress, tnPortLoopbckDstMacAddr MacAddress, tnPortAccEgrSapQosMarking INTEGER, tnPortLldpTnlNrstBrdgeDstMac TruthValue, tnPortPtpEnable TruthValue, tnPortSapEtherLLFAdminStatus INTEGER, tnPortSapEtherLLFOperStatus INTEGER, tnPortSapEtherLLFId Unsigned32 } tnPortEtherEgressMaxBurst OBJECT-TYPE SYNTAX Integer32 (-1 | 32..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set." DEFVAL { -1 } ::= { tnSASPortEtherExtnEntry 1 } tnPortStatsQueue1PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'." ::= { tnSASPortEtherExtnEntry 2 } tnPortStatsQueue2PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'." ::= { tnSASPortEtherExtnEntry 3 } tnPortStatsQueue3PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'." ::= { tnSASPortEtherExtnEntry 4 } tnPortStatsQueue4PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'." ::= { tnSASPortEtherExtnEntry 5 } tnPortStatsQueue5PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'." ::= { tnSASPortEtherExtnEntry 6 } tnPortStatsQueue6PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'." ::= { tnSASPortEtherExtnEntry 7 } tnPortStatsQueue7PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'." ::= { tnSASPortEtherExtnEntry 8 } tnPortStatsQueue8PktsFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'." ::= { tnSASPortEtherExtnEntry 9 } tnPortEtherEgrSchedMode OBJECT-TYPE SYNTAX INTEGER { fc-based (1), sap-based (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "tnPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue to schedule. In 'sap-based' mode the scheduler uses the priority of all the egress queues in a SAP to determine the next queue to schedule and uses round-robin scheduling mechanism to schedule each of the SAP" DEFVAL { fc-based } ::= { tnSASPortEtherExtnEntry 10 } tnPortEtherLoopback OBJECT-TYPE SYNTAX INTEGER { none (0), internal (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If tnPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback" DEFVAL { none } ::= { tnSASPortEtherExtnEntry 11 } tnPortEtherIpMTU OBJECT-TYPE SYNTAX Unsigned32 (0|512..9000) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "tnPortEtherIpMTU is the IP MTU for interfaces using this port" ::= { tnSASPortEtherExtnEntry 12 } tnPortEtherClockConfig OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), automatic (1), manual-master (2), manual-slave (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the value of tnPortEtherClockConfig is 'automatic' the Ethernet interface will automatically negotiate clock mastership along with other link parameters with the far end. Depending upon the capabilities of the two ends, one will be master the other will be slave for clocking. When the value of tnPortEtherClockConfig is 'manual-master', the Ethernet interface will negotiate other link parameters with the far end except clock mastership. It assumes clock mastership and want the other end to be slave. When the value is 'manual-slave' this ethernet interface chooses to be slave and wants the far end to assume clock mastership. For 10 baseT and 100 baseT ethernet interfaces, value of this variable should be 'none', as this will not be applicable for those interfaces." DEFVAL { notApplicable } ::= { tnSASPortEtherExtnEntry 13 } tnPortLoopbckServId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback Service Id" ::= { tnSASPortEtherExtnEntry 14 } tnPortLoopbckSapPortId OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback Sap Port Id 0 indicates the port is undefined." DEFVAL {0} ::= { tnSASPortEtherExtnEntry 15 } tnPortLoopbckSapEncapVal OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback Sap Encapsulation" ::= { tnSASPortEtherExtnEntry 16 } tnPortLoopbckSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback Source Mac Address" ::= { tnSASPortEtherExtnEntry 17 } tnPortLoopbckDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback Destination Mac Address" ::= { tnSASPortEtherExtnEntry 18 } tnPortAccEgrSapQosMarking OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port Ethernet Access Egress Sap Qos Marking" DEFVAL { enable } ::= { tnSASPortEtherExtnEntry 19 } tnPortLldpTnlNrstBrdgeDstMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If tnPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled." DEFVAL { false } ::= { tnSASPortEtherExtnEntry 20 } tnPortPtpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "1588v2 PTP enabled on port" DEFVAL { false } ::= { tnSASPortEtherExtnEntry 21 } tnPortSapEtherLLFAdminStatus OBJECT-TYPE SYNTAX INTEGER{ notApplicable(0), up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortSapEtherLLFAdminStatus specifies whether or not Link-Loss Forwarding has been enabled 'up' or disabled 'down' on a SAP that is associated to this port. If a SAP has not been associated to this port, 'notApplicable' is specified. See tnSapEthernetInfoTable for provisioning details." ::= { tnSASPortEtherExtnEntry 22 } tnPortSapEtherLLFOperStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), -- LLF not applicable fault (1), -- service is down or fault detected. clear (2) -- service is up and no fault detected. } MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortSapEtherLLFOperStatus indicates whether or not a SAP that is associated to the port is operationally 'down'. If a SAP has not been associated to the port, 'notApplicable' is specified. See tnSapEthernetInfoTable for details." ::= { tnSASPortEtherExtnEntry 23 } tnPortSapEtherLLFId OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortSapEtherLLFId specifies the identifier between sending and receiving objects that are LLF enabled on a SAP that is associated to this port. See tnSapEthernetInfoTable for provisioning details." ::= { tnSASPortEtherExtnEntry 24 } -- -- Network Port Egress Stats Table -- -- tnPortAccessEgressQueueStatsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TmnxPortAccessEgressQueueStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Defines the Nokia SAS series access port egress -- statistics table for providing, via SNMP, the capability of -- retrieving the traffic statistics for the physical queues -- being used for the ports to forward the access egress -- traffic." -- ::= { tnSASPortObjs 7 } -- -- tnPortAccessEgressQueueStatsEntry OBJECT-TYPE -- SYNTAX TmnxPortAccessEgressQueueStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Defines an entry in tnPortAccessEgressQueueStatsTable. Entries are -- created and deleted by the system depending on the queue policy -- being used at the specific port." -- INDEX { tnPortPortID, tnPortAccessEgressQueueStatsIndex } -- ::= { tnPortAccessEgressQueueStatsTable 1 } -- -- TmnxPortAccessEgressQueueStatsEntry ::= -- SEQUENCE { -- tnPortAccessEgressQueueStatsIndex TQueueId, -- tnPortAccessEgressQueueStatsFwdPkts Counter64, -- tnPortAccessEgressQueueStatsFwdOcts Counter64, -- tnPortAccessEgressQueueStatsDroPkts Counter64, -- tnPortAccessEgressQueueStatsDroOcts Counter64 -- } -- -- tnPortAccessEgressQueueStatsIndex OBJECT-TYPE -- SYNTAX TQueueId (1..8) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "tnPortAccessEgressQueueIndex serves as the tertiary index. When used -- in conjunction with tnSysSwitchId and tnPortPortID, it uniquely -- identifies a access egress queue for the specified port in the -- managed system." -- ::= { tnPortAccessEgressQueueStatsEntry 1 } -- -- tnPortAccessEgressQueueStatsFwdPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnPortAccessEgressQueueStatsFwdPkts indicates the number of forwarded -- access egress packets forwarded on this port using this queue." -- ::= { tnPortAccessEgressQueueStatsEntry 2 } -- -- tnPortAccessEgressQueueStatsFwdOcts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnPortAccessEgressQueueStatsFwdOcts indicates the number of forward -- access egress octets forwarded on this port using this queue." -- ::= { tnPortAccessEgressQueueStatsEntry 3 } -- -- tnPortAccessEgressQueueStatsDroPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnPortAccessEgressQueueStatsDroPkts indicates the number of dropped -- access egress packets on this port using this queue." -- ::= { tnPortAccessEgressQueueStatsEntry 4 } -- -- tnPortAccessEgressQueueStatsDroOcts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnPortAccessEgressQueueStatsDroOcts indicates the number of dropped -- network egress octets on this port using this queue." -- ::= { tnPortAccessEgressQueueStatsEntry 5 } tnPortNetEgressQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPortNetEgressQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAS series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic." ::= { tnSASPortObjs 8 } tnPortNetEgressQueueStatsEntry OBJECT-TYPE SYNTAX TmnxPortNetEgressQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in tnPortNetEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port." INDEX { tnPortPortID, tnPortNetEgressQueueStatsIndex } ::= { tnPortNetEgressQueueStatsTable 1 } TmnxPortNetEgressQueueStatsEntry ::= SEQUENCE { tnPortNetEgressQueueStatsIndex TQueueId, tnPortNetEgressQueueStatsFwdPkts Counter64, tnPortNetEgressQueueStatsFwdOcts Counter64, tnPortNetEgressQueueStatsDroPkts Counter64, tnPortNetEgressQueueStatsDroOcts Counter64, tnPortNetEgressQueueStatsInProfDroPkts Counter64, tnPortNetEgressQueueStatsInProfDroOcts Counter64, tnPortNetEgressQueueStatsOutProfDroPkts Counter64, tnPortNetEgressQueueStatsOutProfDroOcts Counter64, tnPortNetEgressQueueOperPIR TPIRRate, tnPortNetEgressQueueOperCIR TCIRRate } tnPortNetEgressQueueStatsIndex OBJECT-TYPE SYNTAX TQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system." ::= { tnPortNetEgressQueueStatsEntry 1 } tnPortNetEgressQueueStatsFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue." ::= { tnPortNetEgressQueueStatsEntry 2 } tnPortNetEgressQueueStatsFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue." ::= { tnPortNetEgressQueueStatsEntry 3 } tnPortNetEgressQueueStatsDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue." ::= { tnPortNetEgressQueueStatsEntry 4 } tnPortNetEgressQueueStatsDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue." ::= { tnPortNetEgressQueueStatsEntry 5 } tnPortNetEgressQueueStatsInProfDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue." ::= { tnPortNetEgressQueueStatsEntry 6 } tnPortNetEgressQueueStatsInProfDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue." ::= { tnPortNetEgressQueueStatsEntry 7 } tnPortNetEgressQueueStatsOutProfDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue." ::= { tnPortNetEgressQueueStatsEntry 8 } tnPortNetEgressQueueStatsOutProfDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "tnPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue." ::= { tnPortNetEgressQueueStatsEntry 9 } tnPortNetEgressQueueOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational PIR rate." ::= { tnPortNetEgressQueueStatsEntry 10 } tnPortNetEgressQueueOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational CIR rate." ::= { tnPortNetEgressQueueStatsEntry 11 } -- -- Extensions of Tmnx DS1 Port table -- -- aluExtTmnxDS1PortTable OBJECT-TYPE -- SYNTAX SEQUENCE OF AluExtTmnxDS1PortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The aluExtTmnxDS1PortTable has an entry for a DS1 physical port." -- ::= { tnSASPortObjs 9 } -- aluExtTmnxDS1PortEntry OBJECT-TYPE -- SYNTAX AluExtTmnxDS1PortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Each row entry represents extended functionality of a physical -- DS1 port on Nokia 7210 SAS devices. Entries cannot be -- created or deleted via SNMP SET operations. Entries in this table -- will be created or deleted automatically when entries in the -- tmnxDS1PortTable are created or deleted." -- AUGMENTS { tnTmnxDS1PortEntry } -- ::= { aluExtTmnxDS1PortTable 1 } -- AluExtTmnxDS1PortEntry ::= -- SEQUENCE { -- aluExtDS1PortLineImpedance INTEGER -- } -- aluExtDS1PortLineImpedance OBJECT-TYPE -- SYNTAX INTEGER { -- notApplicable (0), -- impedance75Ohms (1), -- impedance100Ohms (2), -- impedance120Ohms (3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The value of aluExtDS1PortLineImpedance indicates the current line -- impedance set on the physical T1/E1 port. -- -- T1 Ports may only be configured to have an impedance of 100 Ohms. -- -- E1 Ports may be configured to have an impledance of either 75 or -- 120 Ohms where the default impedance is 120 Ohms." -- DEFVAL { impedance100Ohms } -- ::= { aluExtTmnxDS1PortEntry 1 } -- -- Port ACR Clock Stats Table -- -- tnPortAcrClkStatsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TnPortAcrClkStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Defines the Nokia SAR series port adaptive clock -- recovery (ACR) statistics table for providing, via SNMP, the -- capability of retrieving statistical information relating -- to clock that is derived from the ACR CPIPE PW." -- ::= { tnSASPortObjs 10 } -- -- tnPortAcrClkStatsEntry OBJECT-TYPE -- SYNTAX TnPortAcrClkStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Defines an entry in tnPortAcrClkStatsTable. Entries are -- created and deleted by the system depending port -- configuration." -- INDEX { tnPortPortID } -- ::= { tnPortAcrClkStatsTable 1 } -- -- TnPortAcrClkStatsEntry ::= -- SEQUENCE { -- tnLastUpdateTime TimeStamp, -- tnTotalMinutesIn24Hour Unsigned32, -- tnCurrent24HourFreqOffsetMeanPpb Integer32, -- tnCurrent24HourFreqOffsetStdDevPpb Unsigned32, -- tnMaxShortIntervalMinutes Unsigned32, -- tnTotalShortIntervalMinutes Unsigned32, -- tnCurrent1MinValidData TruthValue, -- tnCurrent1MinPhaseErrorMeanPpb Integer32, -- tnCurrent1MinPhaseErrorStdDevNs Unsigned32, -- tnCurrent1MinPhaseErrorMeanNs Integer32, -- tnCurrent1MinFreqOffsetMeanPpb Integer32, -- tnCurrent1MinFreqOffsetStdDevPpb Unsigned32 -- } -- -- tnLastUpdateTime OBJECT-TYPE -- SYNTAX TimeStamp -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The last time the ACR statistics were updated" -- ::= { tnPortAcrClkStatsEntry 1 } -- -- tnTotalMinutesIn24Hour OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The number of minutes in tn24HourFreqOffsetMeanPpb -- and tn24HourFreqOffsetStdDevPpb" -- ::= { tnPortAcrClkStatsEntry 2 } -- -- tnCurrent24HourFreqOffsetMeanPpb OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset -- from the local oscillator clock in parts per billion for up to the -- last 24 hour." -- ::= { tnPortAcrClkStatsEntry 3 } -- -- tnCurrent24HourFreqOffsetStdDevPpb OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the -- frequency offset from the local oscillator clock in parts per billion -- for up to the last 24 hour." -- ::= { tnPortAcrClkStatsEntry 4 } -- -- tnMaxShortIntervalMinutes OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnMaxShortIntervalMinutes the maximum number of tnStatsShortIntervalIndexes." -- ::= { tnPortAcrClkStatsEntry 5 } -- -- tnTotalShortIntervalMinutes OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "tnTotalShortIntervalMinutes is the number of tnStatsShortIntervalIndexes -- that have valid statistics" -- ::= { tnPortAcrClkStatsEntry 6 } -- -- tnCurrent1MinValidData OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This variable indicates if the data for the first -- interval is valid." -- ::= { tnPortAcrClkStatsEntry 7 } -- -- tnCurrent1MinPhaseErrorMeanPpb OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean phase error from the local oscillator clock -- in parts per billion during the first interval." -- ::= { tnPortAcrClkStatsEntry 8 } -- -- tnCurrent1MinPhaseErrorStdDevNs OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The standard deviation of the phase error from the local -- oscillator clock in nano seconds during the first interval." -- ::= { tnPortAcrClkStatsEntry 9 } -- -- tnCurrent1MinPhaseErrorMeanNs OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean of the phase error from the local -- oscillator clock in nano seconds during the first interval." -- ::= { tnPortAcrClkStatsEntry 10 } -- -- tnCurrent1MinFreqOffsetMeanPpb OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean frequency offset from the local oscillator clock -- in parts per billion during the first interval." -- ::= { tnPortAcrClkStatsEntry 11 } -- -- tnCurrent1MinFreqOffsetStdDevPpb OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The standard deviation of the frequency offset from the -- local oscillator clock in nano seconds during the first interval." -- ::= { tnPortAcrClkStatsEntry 12 } -- -- Port ACR Clock Stats Short Interval Table -- -- tnPortAcrClkStatsShortIntervalTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TnPortAcrClkStatsShortIntervalEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The Port ACR Clock Interval Table contains various -- statistics collected by each adaptively timed port -- over the previous 15 minutes. The past 15 minutes are -- broken into 15 1 minute intervals. Each -- row in this table represents one such interval -- (identified by tnAcrClkIntervalNumber)." -- ::= { tnSASPortObjs 11 } -- -- tnPortAcrClkStatsShortIntervalEntry OBJECT-TYPE -- SYNTAX TnPortAcrClkStatsShortIntervalEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "An entry in the Port ACR Clock Interval table." -- INDEX { tnPortPortID, tnIntervalNumber} -- ::= { tnPortAcrClkStatsShortIntervalTable 1 } -- -- TnPortAcrClkStatsShortIntervalEntry ::= -- SEQUENCE { -- tnIntervalNumber INTEGER, -- tnIntervalValidData TruthValue, -- tnIntervalUpdateTime TimeStamp, -- tnIntervalPhaseErrorMeanPpb Integer32, -- tnIntervalPhaseErrorStdDevNs Unsigned32, -- tnIntervalPhaseErrorMeanNs Integer32, -- tnIntervalFreqOffsetMeanPpb Integer32, -- tnIntervalFreqOffsetStdDevPpb Unsigned32 -- } -- -- tnIntervalNumber OBJECT-TYPE -- SYNTAX INTEGER (1..15) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A number between 1 and 15, where 1 is the most -- recently completed 1 minute interval and 15 is -- the 1 minutes interval completed 14 minutes prior -- to interval 1." -- ::= { tnPortAcrClkStatsShortIntervalEntry 1 } -- -- tnIntervalValidData OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This variable indicates if the data for this -- interval is valid." -- ::= { tnPortAcrClkStatsShortIntervalEntry 2 } -- -- tnIntervalUpdateTime OBJECT-TYPE -- SYNTAX TimeStamp -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The update time of the ACR interval statistics" -- ::= { tnPortAcrClkStatsShortIntervalEntry 3 } -- -- tnIntervalPhaseErrorMeanPpb OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean phase error from the local oscillator clock -- in parts per billion during the interval." -- ::= { tnPortAcrClkStatsShortIntervalEntry 4 } -- -- tnIntervalPhaseErrorStdDevNs OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The standard deviation of the phase error from the local -- oscillator clock in nano seconds during the interval." -- ::= { tnPortAcrClkStatsShortIntervalEntry 5 } -- -- tnIntervalPhaseErrorMeanNs OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean of the phase error from the local -- oscillator clock in nano seconds during the interval." -- ::= { tnPortAcrClkStatsShortIntervalEntry 6 } -- -- tnIntervalFreqOffsetMeanPpb OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The mean frequency offset from the local oscillator clock -- in parts per billion during the interval." -- ::= { tnPortAcrClkStatsShortIntervalEntry 7 } -- -- tnIntervalFreqOffsetStdDevPpb OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The standard deviation of the frequency offset from the -- local oscillator clock in nano seconds during the interval." -- ::= { tnPortAcrClkStatsShortIntervalEntry 8 } -- -- ALU Extensions of Tmnx DS1 table -- -- aluExtTmnxDS1Table OBJECT-TYPE -- SYNTAX SEQUENCE OF AluExtTmnxDS1Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel." -- ::= { tnSASPortObjs 12 } -- aluExtTmnxDS1Entry OBJECT-TYPE -- SYNTAX AluExtTmnxDS1Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Each row entry represents extended functionality of a DS1 physical -- port or channel on Nokia 7210 SAS devices. Entries cannot be -- created or deleted via SNMP SET operations. Entries in this table -- will be created or deleted automatically when entries in the -- tmnxDS1Table are created or deleted." -- AUGMENTS { tmnxDS1Entry } -- ::= { aluExtTmnxDS1Table 1 } -- AluExtTmnxDS1Entry ::= -- SEQUENCE { -- aluExtDS1SignalBitsState OCTET STRING -- } -- aluExtDS1SignalBitsState OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE(64)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "aluExtDS1SignalBitsState is an array of bytes used to indicate the -- current state of the ABCD signalling bits for all timeslots of a -- DS1/E1. -- The first half of the array or the 32 most significant bytes describe -- the RX ABCD bits. The other half describes the TX ABCD bits. -- In each half of the array, every byte represents a particular timeslot. -- The most significant byte represents timeslot 1. The least significant -- byte represents timeslot 32. -- The byte arrangement is as follows: -- array index: | 0 1 ... 30 31 | 32 33 ... 62 63 | -- timeslot: | 1 2 ... 31 32 | 1 2 ... 31 32 | -- | <---- RX -----> | <---- TX -----> | -- Each byte carries ABCD bits in the least significant nibble. The -- byte's most significant bit indicates the validity of the ABCD bits. -- The bit arrangement is as follows: -- bit pos: | 7 6 5 4 3 2 1 0 | -- | V x x x A B C D | -- 'V' - validity (0 = invalid, 1 = valid) -- 'x' - don't care -- ABCD bits are marked invalid for a variety of situations (eg. -- tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured -- as part of a channel-group, DS1/E1 status not up, etc.). -- For CAS DS1 SF, only the AB signalling bits are supported. The remaining -- 2 least significant bits in the nibble are undefined. -- " -- ::= { aluExtTmnxDS1Entry 3 } -- -- PSS specific extension table of ifEntry -- tnSASPssIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TnSASPssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional objects for the interface table (ifTable) required for the management of packet cards in PSS." ::= { tnSASPortObjs 50 } tnSASPssIfEntry OBJECT-TYPE SYNTAX TnSASPssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to PSS packet cards." AUGMENTS { ifEntry } ::= { tnSASPssIfTable 1} TnSASPssIfEntry ::= SEQUENCE { ifStatsUpdateTimeStamp Counter64 } ifStatsUpdateTimeStamp OBJECT-TYPE SYNTAX Counter64 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A timestamp value to indicate the last update to the statistics in the interface table. This can be used for accurate delta calculations of periodic readings of the statistics. The timestamp is in millisecond units" ::= { tnSASPssIfEntry 1 } -- -- Virtual port table for loopback -- tnVirtualPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TnVirtualPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port table has an entry for each virtual port" ::= { tnSASPortObjs 15 } tnVirtualPortEntry OBJECT-TYPE SYNTAX TnVirtualPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual port" INDEX { tnSysSwitchId, tnVirtualPortPortID } ::= { tnVirtualPortTable 1 } TnVirtualPortEntry ::= SEQUENCE { tnVirtualPortPortID TmnxPortID, tnVirtualPortInUse INTEGER, tnVirtualPortSpeed INTEGER } tnVirtualPortPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnVirtualPortPortID is an index into this table" ::= { tnVirtualPortEntry 1 } tnVirtualPortInUse OBJECT-TYPE SYNTAX INTEGER { not-in-use (1), mirror (2), macswap (3), testhead (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "tnVirtualPortInUse describes whether the virtual port is used by an application or not." ::= { tnVirtualPortEntry 2 } tnVirtualPortSpeed OBJECT-TYPE SYNTAX INTEGER { one-gig (1), ten-gig (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "tnVirtualPortSpeed describes the speed of the virtual ports." ::= { tnVirtualPortEntry 3 } -- -- Dummy Scalars -- tnSASPortScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnSASPortObjs 101 } tnSASPortScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnSASPortObjs 102 } -- -- Conformance Information -- -- tnSASPortCompliances OBJECT IDENTIFIER ::= { tnSASPortConformance 1 } -- tnSASPortGroups OBJECT IDENTIFIER ::= { tnSASPortConformance 2 } -- tnSASPortV1v0Group OBJECT-GROUP -- OBJECTS { -- tnPortUplinkMode, -- tnPortAccessEgressQoSPolicyId, -- tnPortNetworkQoSPolicyId, -- tnPortShgGroupName, -- tnPortShgRowStatus, -- tnPortShgInstanceId, -- tnPortShgDescription, -- tnPortShgLastMgmtChange, -- tnSASPortNetIngressFwdInProfPkts, -- tnSASPortNetIngressFwdOutProfPkts, -- tnSASPortNetIngressFwdInProfOcts, -- tnSASPortNetIngressFwdOutProfOcts, -- tnPortEtherEgressMaxBurst, -- tnPortStatsQueue1PktsFwd, -- tnPortStatsQueue2PktsFwd, -- tnPortStatsQueue3PktsFwd, -- tnPortStatsQueue4PktsFwd, -- tnPortStatsQueue5PktsFwd, -- tnPortStatsQueue6PktsFwd, -- tnPortStatsQueue7PktsFwd, -- tnPortStatsQueue8PktsFwd, -- tnPortEtherLoopback -- } -- STATUS current -- DESCRIPTION -- " sas group object definition " -- ::= { tnSASPortGroups 1 } -- tnSASPortV1v1Group OBJECT-GROUP -- OBJECTS { -- tnPortAccessEgressQueueStatsFwdPkts, -- tnPortAccessEgressQueueStatsFwdOcts, -- tnPortAccessEgressQueueStatsDroPkts, -- tnPortAccessEgressQueueStatsDroOcts, -- tnPortNetEgressQueueStatsFwdPkts, -- tnPortNetEgressQueueStatsFwdOcts, -- tnPortNetEgressQueueStatsDroPkts, -- tnPortNetEgressQueueStatsDroOcts, -- tnPortNetEgressQueueStatsInProfDroPkts, -- tnPortNetEgressQueueStatsInProfDroOcts, -- tnPortNetEgressQueueStatsOutProfDroPkts, -- tnPortNetEgressQueueStatsOutProfDroOcts -- } -- STATUS current -- DESCRIPTION -- " sas group object definition " -- ::= { tnSASPortGroups 2 } -- tnSASPortV2v0Group OBJECT-GROUP -- OBJECTS { -- aluExtDS1PortLineImpedance, -- tnPortEtherEgrSchedMode -- } -- STATUS current -- DESCRIPTION -- " SAS group object definitions for 2.0 release" -- ::= { tnSASPortGroups 3 } -- tnSASPortV3v0Group OBJECT-GROUP -- OBJECTS { -- tnPortEtherClockConfig -- } -- STATUS current -- DESCRIPTION -- " SAS group object definitions for 3.0 release" -- ::= { tnSASPortGroups 6 } -- aluPortAcrClkStatsGroup OBJECT-GROUP -- OBJECTS { -- aluLastUpdateTime, -- aluTotalMinutesIn24Hour, -- aluCurrent24HourFreqOffsetMeanPpb, -- aluCurrent24HourFreqOffsetStdDevPpb, -- aluMaxShortIntervalMinutes, -- aluTotalShortIntervalMinutes, -- aluCurrent1MinValidData, -- aluCurrent1MinPhaseErrorMeanPpb, -- aluCurrent1MinPhaseErrorStdDevNs, -- aluCurrent1MinPhaseErrorMeanNs, -- aluCurrent1MinFreqOffsetMeanPpb, -- aluCurrent1MinFreqOffsetStdDevPpb, -- aluIntervalNumber, -- aluIntervalValidData, -- aluIntervalUpdateTime, -- aluIntervalPhaseErrorMeanPpb, -- aluIntervalPhaseErrorStdDevNs, -- aluIntervalPhaseErrorMeanNs, -- aluIntervalFreqOffsetMeanPpb, -- aluIntervalFreqOffsetStdDevPpb -- } -- STATUS current -- DESCRIPTION -- "The group of objects supporting retrieval of the ACR clock statistic -- on Nokia SAR series systems" -- ::= { tnSASPortGroups 4 } --tnSASPortV4v0Group OBJECT-GROUP -- OBJECTS { -- tnPortAccessEgressQueueStatsFwdPkts, -- tnPortAccessEgressQueueStatsFwdOcts, -- tnPortAccessEgressQueueStatsDroPkts, -- tnPortAccessEgressQueueStatsDroOcts, -- tnPortNetEgressQueueStatsFwdPkts, -- tnPortNetEgressQueueStatsFwdOcts, -- tnPortNetEgressQueueStatsDroPkts, -- tnPortNetEgressQueueStatsDroOcts, -- tnPortNetEgressQueueStatsInProfDroPkts, -- tnPortNetEgressQueueStatsInProfDroOcts, -- tnPortNetEgressQueueStatsOutProfDroPkts, -- tnPortNetEgressQueueStatsOutProfDroOcts, -- tnPortEtherIpMTU, -- tnPortEtherClockConfig, -- tnPortLoopbckServId, -- tnPortLoopbckSapPortId, -- tnPortLoopbckSapEncapVal, -- tnPortLoopbckSrcMacAddr, -- tnPortLoopbckDstMacAddr, -- tnPortAccEgrSapQosMarking, -- tnPortLldpTnlNrstBrdgeDstMac, -- tnPortPtpEnable, -- tnPortSapEtherLLFAdminStatus, -- tnPortSapEtherLLFOperStatus, -- tnPortSapEtherLLFId -- } -- STATUS current -- DESCRIPTION -- " sas group object definition " -- ::= { tnSASPortGroups 5 } END