TIMETRA-PIM-NG-MIB DEFINITIONS ::= BEGIN IMPORTS InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressPrefixLength, InetAddressType FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TimeStamp, TruthValue FROM SNMPv2-TC tmnxCardHwIndex FROM TIMETRA-CHASSIS-MIB timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB tmnxMcacLagPortsDown, tmnxMcacLevelId FROM TIMETRA-MCAST-CAC-MIB sapEncapValue, sapPortId FROM TIMETRA-SAP-MIB IpAddressPrefixLength, TNamedItem, TNamedItemOrEmpty, TPolicyStatementNameOrEmpty, TmnxAdminState, TmnxEnabledDisabled, TmnxMulticastAddrFamily, TmnxOperState, TmnxServId, TmnxVPNRouteDistinguisher, TmnxVRtrID FROM TIMETRA-TC-MIB vRtrID, vRtrIfIndex FROM TIMETRA-VRTR-MIB ; timetraPimNgMIBModule MODULE-IDENTITY LAST-UPDATED "201701010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the extensions to the PIM routing protocol for the Nokia SROS device. Copyright 2008-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201701010000Z" DESCRIPTION "Rev 15.0 1 Jan 2017 00:00 15.0 release of the TIMETRA-PIM-NG-MIB." REVISION "201601010000Z" DESCRIPTION "Rev 14.0 1 Jan 2016 00:00 14.0 release of the TIMETRA-PIM-NG-MIB." REVISION "201501010000Z" DESCRIPTION "Rev 13.0 1 Jan 2015 00:00 13.0 release of the TIMETRA-PIM-NG-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 1 Jan 2014 00:00 12.0 release of the TIMETRA-PIM-NG-MIB." REVISION "201102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-PIM-NG-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-PIM-NG-MIB." REVISION "200801010000Z" DESCRIPTION "Rev 0.1 01 Jan 2008 00:00 Initial version of the TIMETRA-PIM-NG-MIB." ::= { timetraSRMIBModules 50 } tmnxPimNgObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 50 } vRtrPimNgProtocolObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 1 } vRtrPimNgGeneralTableLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGeneralTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgGeneralTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 1 } vRtrPimNgGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPimNgGeneralTable contains objects for general control and management of the PIM protocol instance within a virtual router." ::= { vRtrPimNgProtocolObjs 2 } vRtrPimNgGeneralEntry OBJECT-TYPE SYNTAX VRtrPimNgGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an instance of the PIM protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is set to 'create'. The entry is destroyed when vRtrPimStatus is set to 'delete'" INDEX { vRtrID } ::= { vRtrPimNgGeneralTable 1 } VRtrPimNgGeneralEntry ::= SEQUENCE { vRtrPimNgGenRowLastChanged TimeStamp, vRtrPimNgGenAdminState TmnxAdminState, vRtrPimNgGenOperState TmnxOperState, vRtrPimNgGenCreateInterfaces INTEGER, vRtrPimNgGenMaxMdts Integer32, vRtrPimNgGenNonDrAttractTraffic TruthValue, vRtrPimNgGenEcmpBalance TruthValue, vRtrPimNgGenEcmpBalanceHoldTime Unsigned32, vRtrPimNgGenEcmpReBlncInProg TruthValue, vRtrPimNgGenEcmpLastReBlncTime TimeStamp, vRtrPimNgGenEcmpRebalanceType INTEGER, vRtrPimNgGenEcmpOptThreshold Unsigned32, vRtrPimNgGenEcmpNextBalanceTime Unsigned32, vRtrPimNgGenLagUsageOptimize TruthValue, vRtrPimNgGenEcmpHashingEnabled TruthValue, vRtrPimNgGenEnableMdtSpt TruthValue, vRtrPimNgGenRpfVectorFlags BITS, vRtrPimNgGenEcmpHashRebalance TruthValue, vRtrPimNgGenMultiStreamSpmsi TruthValue, vRtrPimNgGenBgpNhOverride TruthValue, vRtrPimNgGenPimSsmScaling TruthValue, vRtrPimNgGenMtuOverHead Integer32 } vRtrPimNgGenRowLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenRowLastChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgGeneralEntry 1 } vRtrPimNgGenAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenAdminState specifies the current administrative state of this PIM protocol instance on this virtual router. When vRtrPimNgGenAdminState is set to 'inService', the agent attempts to enable the PIM protocol instance on this virtual router. When vRtrPimNgGenAdminState is set to 'outOfService', the agent attempts to disable the PIM protocol instance on this router." DEFVAL { outOfService } ::= { vRtrPimNgGeneralEntry 2 } vRtrPimNgGenOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenOperState indicates the current operating state of this PIM protocol instance on this router." ::= { vRtrPimNgGeneralEntry 3 } vRtrPimNgGenCreateInterfaces OBJECT-TYPE SYNTAX INTEGER { ies (1), non-ies (2), all (3), none (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenCreateInterfaces specifies the PIM interfaces with default parameters. Setting the value of this object to 'ies' creates all IES interfaces in PIM. When the value of vRtrPimNgGenCreateInterfaces is set to 'all', all IES and non IES interfaces are created in PIM. When the value of vRtrPimNgGenCreateInterfaces is set to 'none', all interfaces that are not manually created or modified are removed." DEFVAL { none } ::= { vRtrPimNgGeneralEntry 4 } vRtrPimNgGenMaxMdts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenMaxMdts indicates the maximum number of Multicast Distribution Trees (MDTs) that can be configured on the system." ::= { vRtrPimNgGeneralEntry 5 } vRtrPimNgGenNonDrAttractTraffic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenNonDrAttractTraffic specifies whether the router should ignore the designated router state and attract traffic even when it is not the designated router. If the value is 'true', the DR state is ignored, and if it's 'false', the DR value is honored." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 6 } vRtrPimNgGenEcmpBalance OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpBalance specifies whether the multicast balancing of traffic over ECMP links is enabled or not. If the value of vRtrPimNgGenEcmpBalance is 'true', each and every multicast stream that needs to be forwarded over an ECMP link will be re-evaluated for the total multicast bandwidth utilization. Re-evaluation will happen on the ECMP interface in question. The value of vRtrPimNgGenEcmpBalance is mutually exclusive with the value of vRtrPimNgGenEcmpHashingEnabled in the same context. An 'inconsistentValue' error is returned when an attempt is made to set the value of vRtrPimNgGenEcmpBalance to 'true' when the value of vRtrPimNgGenEcmpHashingEnabled is set to 'true'." DEFVAL { true } ::= { vRtrPimNgGeneralEntry 7 } vRtrPimNgGenEcmpBalanceHoldTime OBJECT-TYPE SYNTAX Unsigned32 (1..600) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpBalanceHoldTime specifies the hold time in minutes that applies after an interface has been added to the ECMP link." DEFVAL { 1 } ::= { vRtrPimNgGeneralEntry 8 } vRtrPimNgGenEcmpReBlncInProg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpReBlncInProg indicates whether or not multicast ECMP rebalancing is currently in progress or not." ::= { vRtrPimNgGeneralEntry 9 } vRtrPimNgGenEcmpLastReBlncTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpLastReBlncTime indicates the time when the last rebalancing occurred if the value of vRtrPimNgGenEcmpReBlncInProg is 'false'." ::= { vRtrPimNgGeneralEntry 10 } vRtrPimNgGenEcmpRebalanceType OBJECT-TYPE SYNTAX INTEGER { triggered (1), operatorForced (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpRebalanceType indicates the type of ECMP rebalance." ::= { vRtrPimNgGeneralEntry 11 } vRtrPimNgGenEcmpOptThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgGenEcmpOptThreshold indicates the optional threshold value for ECMP balancing. This object was obsoleted from release 6.0." ::= { vRtrPimNgGeneralEntry 12 } vRtrPimNgGenEcmpNextBalanceTime OBJECT-TYPE SYNTAX Unsigned32 (0..600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpNextBalanceTime indicates how much time is remaining until the next rebalance would occur." ::= { vRtrPimNgGeneralEntry 13 } vRtrPimNgGenLagUsageOptimize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenLagUsageOptimize specifies whether the router should optimize usage of the LAG such that traffic for a given multicast stream destined to an IP interface using the LAG is sent only to the forwarding complex that owns the LAG link on which it will actually be forwarded. If this optimization is turned off, the traffic will be sent to all the forwarding complexes that own at least one link in the LAG. Changing the value of this object causes the PIM protocol to be restarted." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 14 } vRtrPimNgGenEcmpHashingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpHashingEnabled specifies whether or not the multicast balancing of traffic over ECMP links is hash based. If vRtrPimNgGenEcmpHashingEnabled is 'true' then the multicast balancing of traffic over ECMP links is done based on Upstream Multicast Hop(UMH) algorithm. The value of vRtrPimNgGenEcmpHashingEnabled is mutually exclusive with the value of vRtrPimNgGenEcmpBalance in the same context. An 'inconsistentValue' error is returned when an attempt is made to set the value of vRtrPimNgGenEcmpHashingEnabled to 'true' when the value of vRtrPimNgGenEcmpBalance is set to 'true'." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 15 } vRtrPimNgGenEnableMdtSpt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenEnableMdtSpt specifies whether or not Shortest Path Tree(SPT) switchover is enabled for the default Multicast Data Tunnel(MDT). If set to 'true' then SPT switchover is enabled and if set to 'false' SPT switchover is disabled. Additionally, whenever we change the value of 'vRtrPimNgGenEnableMdtSpt', the PIM instance must reset all MDTs and reinitiate setup." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 16 } vRtrPimNgGenRpfVectorFlags OBJECT-TYPE SYNTAX BITS { mvpn (0), core (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenRpfVectorFlags specifies whether proxy RPF vectors are used for inter-AS Rosen MVPN. RPF vectors can be used to propagate SG joins in inter-AS Rosen MVPN options B and C." DEFVAL { {} } ::= { vRtrPimNgGeneralEntry 17 } vRtrPimNgGenEcmpHashRebalance OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenEcmpHashRebalance specifies whether the multicast balancing of the ECMP links which is hash based is triggered when a source is added. If vRtrPimNgGenEcmpHashRebalance is 'false' then the multicast balancing of traffic over ECMP links is done after nexthop change event for individual Source address." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 18 } vRtrPimNgGenMultiStreamSpmsi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenMultiStreamSpmsi specifies whether multistream SPMSI is configured on this router." ::= { vRtrPimNgGeneralEntry 19 } vRtrPimNgGenBgpNhOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenBgpNhOverride specifies whether vrf-import extended community should be applied or not." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 20 } vRtrPimNgGenPimSsmScaling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenPimSsmScaling specifies whether pim ssm scaling should be applied or not." DEFVAL { false } ::= { vRtrPimNgGeneralEntry 21 } vRtrPimNgGenMtuOverHead OBJECT-TYPE SYNTAX Integer32 (0 | 44 | 76 | 140 | 268 | 536) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgGenMtuOverHead specifies mtu size to be accounted for the PIM control packets sent over BIER tunnels." DEFVAL { 0 } ::= { vRtrPimNgGeneralEntry 22 } vRtrPimNgAFGenTableLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgAFGenTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 3 } vRtrPimNgAFGenTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgAFGenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPimNgAFGenTable contains objects for general control and management of the PIM protocol instance within a virtual router." ::= { vRtrPimNgProtocolObjs 4 } vRtrPimNgAFGenEntry OBJECT-TYPE SYNTAX VRtrPimNgAFGenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an instance of the PIM protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is set to 'create'. The entry is destroyed when vRtrPimStatus is set to 'delete'" INDEX { vRtrID, vRtrPimNgAFGenAFType } ::= { vRtrPimNgAFGenTable 1 } VRtrPimNgAFGenEntry ::= SEQUENCE { vRtrPimNgAFGenAFType TmnxMulticastAddrFamily, vRtrPimNgAFGenAdminState TmnxAdminState, vRtrPimNgAFGenOperState TmnxOperState, vRtrPimNgAFGenCBSRPriority Integer32, vRtrPimNgAFGenCBSRAddressType InetAddressType, vRtrPimNgAFGenCBSRAddress InetAddress, vRtrPimNgAFGenCBSRAdminState TmnxAdminState, vRtrPimNgAFGenCBSROperState TmnxOperState, vRtrPimNgAFGenBSRAddressType InetAddressType, vRtrPimNgAFGenBSRAddress InetAddress, vRtrPimNgAFGenBSRPriority Integer32, vRtrPimNgAFGenBSRExpiryTime Unsigned32, vRtrPimNgAFGenBSRState INTEGER, vRtrPimNgAFGenBSRUpTime Unsigned32, vRtrPimNgAFGenCRPAddressType InetAddressType, vRtrPimNgAFGenCRPAddress InetAddress, vRtrPimNgAFGenCRPAdminState TmnxAdminState, vRtrPimNgAFGenCRPOperState TmnxOperState, vRtrPimNgAFGenCRPHoldtime Integer32, vRtrPimNgAFGenCRPPriority Integer32, vRtrPimNgAFGenMdtDefGrpAddrType InetAddressType, vRtrPimNgAFGenMdtDefGrpAddress InetAddress, vRtrPimNgAFGenMTIfIndex InterfaceIndexOrZero, vRtrPimNgAFGenCBSRHashMaskLen Integer32, vRtrPimNgAFGenBSRHashMaskLen Integer32, vRtrPimNgAFGenBSRRpfIfIndex InterfaceIndexOrZero, vRtrPimNgAFGenRpfLookupSequence INTEGER, vRtrPimNgAFGenMdtDataPrefixType InetAddressType, vRtrPimNgAFGenMdtDataPrefix InetAddress, vRtrPimNgAFGenMdtDataPrefixMask InetAddressPrefixLength, vRtrPimNgAFGenMdtDataDlayIntrvl Unsigned32, vRtrPimNgAFGenMdtDataJoinTlvPck TruthValue, vRtrPimNgAFGenRowLastChanged TimeStamp, vRtrPimNgAFGenERP TruthValue, vRtrPimNgAFGenERPAdminState TmnxAdminState, vRtrPimNgAFGenMvpnAutoDiscovery TruthValue, vRtrPimNgAFGenMvpnCMcastSignal INTEGER, vRtrPimNgAFGenMvpnGrpAddrMode INTEGER, vRtrPimNgAFGenMvpnSpmsiAutoDisc TruthValue, vRtrPimNgAFGenMvpnUMHSelection INTEGER, vRtrPimNgAFGenMvpnIntersiteShrd TmnxEnabledDisabled, vRtrPimNgAFGenSSMDefRangeDisabl TruthValue, vRtrPimNgAFGenMvpnAD INTEGER, vRtrPimNgAFGenMdtDataGrpAddrMode INTEGER, vRtrPimNgAFGenEnableAsmDataMdt TruthValue, vRtrPimNgAfGenAutoRPDiscovery TruthValue, vRtrPimNgAfGenSSMAsrtCompMode TruthValue, vRtrPimNgAfGenMdtType INTEGER, vRtrPimNgAfGenMcastFastFailover TruthValue, vRtrPimNgAFGenSourceAddressType InetAddressType, vRtrPimNgAFGenSourceAddress InetAddress, vRtrPimNgAFGenGrpPrefixAny TruthValue, vRtrPimNgAfGenMvpnPersistSA TruthValue, vRtrPimNgAfGenUnicastRtRemoval TruthValue, vRtrPimNgAFGenMvpnOperCMcastSig INTEGER, vRtrPimNgAfGenAutoRPCandidate TruthValue, vRtrPimNgAfGenAutoRPMappingAgent TruthValue, vRtrPimNgAfGenAutoRPMAIUAddrType InetAddressType, vRtrPimNgAfGenAutoRPMAIUAddress InetAddress } vRtrPimNgAFGenAFType OBJECT-TYPE SYNTAX TmnxMulticastAddrFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAFGenAFType indicates the address family type supported by the PIM on this instance of router." ::= { vRtrPimNgAFGenEntry 1 } vRtrPimNgAFGenAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenAdminState specifies the current administrative state of this PIM protocol instance associated with this address family on this virtual router." DEFVAL { outOfService } ::= { vRtrPimNgAFGenEntry 2 } vRtrPimNgAFGenOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenOperState indicates the current operating state of this PIM protocol instance associated with this address family on this router." ::= { vRtrPimNgAFGenEntry 3 } vRtrPimNgAFGenCBSRPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSRPriority specifies whether the router is eligible to be a bootstrap router. If the value of this object is set to zero, the router does not participate in the bootstrap election. The highest priority is 255." DEFVAL { 0 } ::= { vRtrPimNgAFGenEntry 4 } vRtrPimNgAFGenCBSRAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSRAddressType specifies the type of address of the Candidate Bootstrap Router(CBSR)." ::= { vRtrPimNgAFGenEntry 5 } vRtrPimNgAFGenCBSRAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSRAddress specifies the type of address of the Candidate Bootstrap Router(CBSR). To participate in the bootstrap election, the router sends bootstrap messages(BSM). These messages carry the BSR address of the router." ::= { vRtrPimNgAFGenEntry 6 } vRtrPimNgAFGenCBSRAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSRAdminState is used to administratively enable or disable participating in the Bootstrap election. Even if the value of this object is set to 'inService', if the vRtrPimNgAFGenCBSRAddress is not set or vRtrPimNgAFGenCBSRPriority is zero, bootstrap messages will not be sent." DEFVAL { outOfService } ::= { vRtrPimNgAFGenEntry 7 } vRtrPimNgAFGenCBSROperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSROperState indicates the operational status of the Bootstrap mechanism. If the value of vRtrPimNgAFGenCBSROperState is 'outOfService', it could be because the router interface corresponding to vRtrPimNgAFGenCBSRAddress is down or PIM is not enabled on that interface or vRtrPimNgAFGenCBSRPriority is zero." ::= { vRtrPimNgAFGenEntry 8 } vRtrPimNgAFGenBSRAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRAddressType indicates the type of address of the elected bootstrap router." ::= { vRtrPimNgAFGenEntry 9 } vRtrPimNgAFGenBSRAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRAddress indicates the address of the elected bootstrap router." ::= { vRtrPimNgAFGenEntry 10 } vRtrPimNgAFGenBSRPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRPriority indicates the priority of the elected bootstrap router. Higher value means higher priority." ::= { vRtrPimNgAFGenEntry 11 } vRtrPimNgAFGenBSRExpiryTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRExpiryTime indicates the minimum time remaining before the elected bootstrap router will be declared down if the value of vRtrPimNgAFGenBSRState is not 'electedBSR'. The value of vRtrPimNgAFGenBSRExpiryTime indicates the time remaining before the router sends the next Bootstrap Message(BSM) if the value of vRtrPimNgAFGenBSRState is 'electedBSR'." ::= { vRtrPimNgAFGenEntry 12 } vRtrPimNgAFGenBSRState OBJECT-TYPE SYNTAX INTEGER { none (0), candidateBSR (1), pendingBSR (2), electedBSR (3), acceptAny (4), acceptPreferred (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRState indicates the state of the router with respect to the bootstrap mechanism. 'candidateBSR', 'pendingBSR' and 'electedBSR' are the states of the router participating in the Bootstrap election. 'acceptAny' and 'acceptPreferred' are the states of the router not participating in the Bootstrap election." ::= { vRtrPimNgAFGenEntry 13 } vRtrPimNgAFGenBSRUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRUpTime indicates the time since the current E-BSR became the elected BSR." ::= { vRtrPimNgAFGenEntry 14 } vRtrPimNgAFGenCRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPAddressType specifies the type of address of the local RP address." ::= { vRtrPimNgAFGenEntry 15 } vRtrPimNgAFGenCRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPAddress specifies the local RP address. This address is sent in the C-RP Advertisements to the bootstrap router." ::= { vRtrPimNgAFGenEntry 16 } vRtrPimNgAFGenCRPAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPAdminState specifies whether to enable or disable sending C-RP Advertisements to the BSR administratively. Even if the value of the object is set to 'inService', if the vRtrPimNgAFGenCRPAddress is not set, C-RP messages will not be sent to the bootstrap router." DEFVAL { outOfService } ::= { vRtrPimNgAFGenEntry 17 } vRtrPimNgAFGenCRPOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPOperState indicates the operational status of the C-RP mechanism. If the router is sending C-RP-Adv messages, the value of this object will be 'inService'." ::= { vRtrPimNgAFGenEntry 18 } vRtrPimNgAFGenCRPHoldtime OBJECT-TYPE SYNTAX Integer32 (5..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPHoldtime specifies the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period." DEFVAL { 150 } ::= { vRtrPimNgAFGenEntry 19 } vRtrPimNgAFGenCRPPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCRPPriority specifies the router's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority." DEFVAL { 192 } ::= { vRtrPimNgAFGenEntry 20 } vRtrPimNgAFGenMdtDefGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDefGrpAddrType specifies the type of default core group address of the Multicast Distribution Tree(MDT) for the VPRN instance." ::= { vRtrPimNgAFGenEntry 21 } vRtrPimNgAFGenMdtDefGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDefGrpAddress specifies the default core group address of the Multicast Distribution Tree(MDT) for the VPRN instance. All the customer PIM control is sent in the service provider network using the default group address. Customer data traffic for which a Data MDT is not used is also sent on the default tunnel. The Multicast Tunnel(MT) interface for a VPRN is created when this object is set to a valid group address. The MT interface is deleted when the object is reset to its default value. The value of this object is not applicable when the value of vRtrPimNgAFGenMvpnGrpAddrMode is set to 'none'." ::= { vRtrPimNgAFGenEntry 22 } vRtrPimNgAFGenMTIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMTIfIndex indicates the interface index of the Multicast Tunnel(MT) interface. MT interface is created when vRtrPimNgAFGenMdtDefGrpAddress is configured with the default core group address." ::= { vRtrPimNgAFGenEntry 23 } vRtrPimNgAFGenCBSRHashMaskLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenCBSRHashMaskLen specifies the length of a mask that is to be ANDed with the group address before the hash function is called. All groups with the same hash map to the same RP. For example, if this value is 24, only the first 24 bits of the group addresses matter. This mechanism is used to map one group or multiple groups to a RP. Default values are 30 and 126 for ipv4 and ipv6 group addresses respectively." DEFVAL { 30 } ::= { vRtrPimNgAFGenEntry 24 } vRtrPimNgAFGenBSRHashMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRHashMaskLen indicates the hash mask length of the elected BSR." ::= { vRtrPimNgAFGenEntry 25 } vRtrPimNgAFGenBSRRpfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenBSRRpfIfIndex indicates the RPF interface towards the elected BSR. The value of this object will be zero if there is no elected BSR in the network." ::= { vRtrPimNgAFGenEntry 26 } vRtrPimNgAFGenRpfLookupSequence OBJECT-TYPE SYNTAX INTEGER { mucastRouteTable (0), ucastRouteTable (1), both (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenRpfLookupSequence specifies the sequence of route tables that PIM uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(PIM) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by PIM for calculating RPF interface towards the source or rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), PIM will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If PIM does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'." DEFVAL { ucastRouteTable } ::= { vRtrPimNgAFGenEntry 27 } vRtrPimNgAFGenMdtDataPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataPrefixType specifies the address type of vRtrPimNgAFGenMdtDataPrefix address." DEFVAL { unknown } ::= { vRtrPimNgAFGenEntry 28 } vRtrPimNgAFGenMdtDataPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataPrefix specifies the address used to configure the pool of multicast addresses in the service provider instance that can be used to generate data only 'Multicast Distribution Tree'(MDT) tunnels. A Service Provider(SP) determines whether a particular VPN is multicast-enabled. If it is, it corresponds to a 'Multicast Domain'(MD). For each Multicast Domain, there is a default MDT through the backbone, connecting all of the PEs that belong to that MD. The configured prefix determines the maximum number of data MDT tunnels that can be generated for the VPRN. Once this pool is exhausted, additional (VPN-S,G) are bound to one of the in-use data MDTs i.e. there could be multiple (VPN-S,G) entries bound to the same data MDT when we exhaust this pool. The value of this object is not applicable when the value of vRtrPimNgAFGenMdtDataGrpAddrMode is set to 'none'." ::= { vRtrPimNgAFGenEntry 29 } vRtrPimNgAFGenMdtDataPrefixMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataPrefixMask specifies the IP address prefix used to configure the group address vRtrPimNgAFGenMdtDataPrefix." DEFVAL { 0 } ::= { vRtrPimNgAFGenEntry 30 } vRtrPimNgAFGenMdtDataDlayIntrvl OBJECT-TYPE SYNTAX Unsigned32 (3..180) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataDlayIntrvl specifies the interval before the Provider Edge(PE) router connected to the source switches traffic from default Multicast Distribution Tree(MDT) to the Data MDT group. The default value is 3 seconds." DEFVAL { 3 } ::= { vRtrPimNgAFGenEntry 31 } vRtrPimNgAFGenMdtDataJoinTlvPck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataJoinTlvPck specifies if packing of MDT Join TLVs is enabled. If multiple Join TLVs are available at the time they are transmitted, the TLVs are packed into a single UDP PDU instead of sending each one in a separate UDP PDU. In scaling scenarios, this packing makes more efficient use of packet buffers and helps in better convergence. The default value is 'true'." DEFVAL { true } ::= { vRtrPimNgAFGenEntry 32 } vRtrPimNgAFGenRowLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenRowLastChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgAFGenEntry 33 } vRtrPimNgAFGenERP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenERP specifies if multicast messages are checked for embedded RP information. When vRtrPimNgAFGenERP has a value of 'true', embedded RP is enabled and users can configure group ranges where embedded RP information will be used. When the value of vRtrPimNgAFGenERP is set to 'false', embedded RP is disabled, administratively shutdown and user configured group ranges (entries in vRtrPimNgERPGrpPrefixTable) will be deleted." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 34 } vRtrPimNgAFGenERPAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenERPAdminState specifies whether to administratively enable or disable checking messages for embedded RP information. Value of vRtrPimNgAFGenERPAdminState is set to 'outOfService' when the value of vRtrPimNgAFGenERP is set to 'false'." DEFVAL { outOfService } ::= { vRtrPimNgAFGenEntry 35 } vRtrPimNgAFGenMvpnAutoDiscovery OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrPimNgAFGenMvpnAutoDiscovery specifies if auto-discovery via BGP is enabled. When auto-discovery is enabled, PIM peering on the inclusive provider tunnel is disabled. This object is obsoleted and replaced with vRtrPimNgAFGenMvpnAD object in 9.0 Release." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 36 } vRtrPimNgAFGenMvpnCMcastSignal OBJECT-TYPE SYNTAX INTEGER { bgp (0), pim (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnCMcastSignal specifies which protocol to use, BGP or PIM, for PE-to-PE signaling of CE multicast states. When vRtrPimNgAFGenMvpnCMcastSignal is set to 'pim' and neighbor discovery via BGP is disabled, PIM peering will be enabled on the inclusive tree." DEFVAL { pim } ::= { vRtrPimNgAFGenEntry 37 } vRtrPimNgAFGenMvpnGrpAddrMode OBJECT-TYPE SYNTAX INTEGER { none (0), asm (1), ssm (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnGrpAddrMode specifies which PIM mode to use, ASM or SSM, for PIM based inclusive provider tunnels." DEFVAL { asm } ::= { vRtrPimNgAFGenEntry 38 } vRtrPimNgAFGenMvpnSpmsiAutoDisc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnSpmsiAutoDisc specifies if auto-discovery-disable via BGP is disabled. When the value of vRtrPimNgAFGenMvpnSpmsiAutoDisc is set to 'true', then C-trees to P-tunnels binding auto-discovery via BGP is disabled and it is signaled using PIM join TLVs." DEFVAL { true } ::= { vRtrPimNgAFGenEntry 39 } vRtrPimNgAFGenMvpnUMHSelection OBJECT-TYPE SYNTAX INTEGER { highestip (0), hashbased (1), tunnelstatus (2), unicastRtPref (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnUMHSelection specifies the selection mechanism to use for selecting Upstream Multicast Hop(UMH). When the value of vRtrPimNgAFGenMvpnUMHSelection is set to 'highestip', the highest IP Address is selected as UMH. When the value is set to 'hashbased', UMH selection is based on the hash based procedures. When the value is set to 'tunnelstatus', UMH selection is based on the state of the tunnel as well as the available unicast routes through the tunnel. When the value is set to 'unicastRtPref', UMH selection is based on the best unicast route. UMH selection is supported only with RSVP-TE PMSI. Its value cannot be modified without shutting down the MVPN instance." DEFVAL { highestip } ::= { vRtrPimNgAFGenEntry 40 } vRtrPimNgAFGenMvpnIntersiteShrd OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnIntersiteShrd specifies whether to use inter-site shared C-trees or not. When the value of vRtrPimNgAFGenMvpnIntersiteShrd is set to 'enabled', the use of inter-site shared C-trees is enabled. When the value is set to 'disabled', the use of inter-site shared C-trees is disabled." DEFVAL { enabled } ::= { vRtrPimNgAFGenEntry 41 } vRtrPimNgAFGenSSMDefRangeDisabl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenSSMDefRangeDisabl specifies whether to disable the use of default range (232/8) for SSM so that it can be used by ASM to process (*,G). When the value of vRtrPimNgAFGenSSMDefRangeDisabl is set to 'true', the use of default range is disabled for SSM and it can be used by ASM. When the value is set to 'false', the SSM default range is enabled." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 42 } vRtrPimNgAFGenMvpnAD OBJECT-TYPE SYNTAX INTEGER { none (0), default (1), mdtSafi (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnAD specifies the auto-discovery mechanism to be used for discovering peers using BGP. When the value of vRtrPimNgAFGenMvpnAD is set to 'none(0)', auto-discovery via BGP is disabled. When the value is set to 'default(1)', auto-discovery via BGP is enabled using default IPMSI AD format. When the value is set to 'mdtSafi(2)', auto-discovery via BGP is enabled using MDT-SAFI format. A MDT-SAFI address is a 16-byte value consisting of 12-byte route distinguisher(RD) followed by a 4-byte group address. An 'inconsistentValue' error is returned if this object is set to non-default value, when the value of TIMETRA-VRTR-MIB::vRtrInterASMvpn is 'true'." DEFVAL { none } ::= { vRtrPimNgAFGenEntry 43 } vRtrPimNgAFGenMdtDataGrpAddrMode OBJECT-TYPE SYNTAX INTEGER { none (0), asm (1), ssm (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDataGrpAddrMode specifies which PIM mode to use, ASM or SSM, for PIM based selective provider tunnels." DEFVAL { none } ::= { vRtrPimNgAFGenEntry 44 } vRtrPimNgAFGenEnableAsmDataMdt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenEnableAsmDataMdt specifies whether RP join on egress is enabled or not. When the value of vRtrPimNgAFGenEnableAsmDataMdt is set to 'true' RP join on egress is enabled. When its value is set to 'false' RP join on egress is disabled and source join is used. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'pim'." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 45 } vRtrPimNgAfGenAutoRPDiscovery OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenAutoRPDiscovery specifies whether auto RP is enabled in discovery mode for this PIM protocol instance." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 46 } vRtrPimNgAfGenSSMAsrtCompMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenSSMAsrtCompMode specifies whether SSM assert is enabled in compatibility mode for this PIM protocol instance. When the value of the object is set to true, for SSM groups, PIM will consider the SPT bit to be implicitly set to compute the value of CouldAssert(S,G,I) as defined in RFC 4601. When the value of the object is set to false, for SSM groups, PIM will not assume the SPT bit to be set. The SPT bit will be set by Update_SPTbit(S,G,iif) macro defined in RFC 4601." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 47 } vRtrPimNgAfGenMdtType OBJECT-TYPE SYNTAX INTEGER { senderOnly (0), receiverOnly (1), senderReceiver (2) } MAX-ACCESS read-create STATUS current DESCRIPTION " The value of vRtrPimNgAfGenMdtType specifies whether the PE node is a sender, receiver or both. When the value of vRtrPimNgAfGenMdtType is set to 'receiverOnly', a receiver PE would not initiate and setup P2MP I/S-PMSI that is originating locally. When the value of vRtrPimNgAfGenMdtType is set to 'senderOnly', PE would initiate and setup P2MP I-PMSI towards other receiver PE nodes. With 'senderOnly' mode, PE node will setup S-PMSI based on the configured threshold." DEFVAL { senderReceiver } ::= { vRtrPimNgAFGenEntry 48 } vRtrPimNgAfGenMcastFastFailover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenMcastFastFailover specifies whether multicast fast failover is enabled for this PIM protocol instance." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 49 } vRtrPimNgAFGenSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenSourceAddressType specifies the address type of vRtrPimNgAFGenSourceAddress address." DEFVAL { unknown } ::= { vRtrPimNgAFGenEntry 50 } vRtrPimNgAFGenSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenSourceAddress specifies the source IP address to use in MVPN PIM signaling." DEFVAL { ''H } ::= { vRtrPimNgAFGenEntry 51 } vRtrPimNgAFGenGrpPrefixAny OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFGenGrpPrefixAny specifies whether join requests received by the MVPN, will be redirected to base instance or not. If the value of vRtrPimNgAFGenGrpPrefixAny is set to 'true' then the join requests are redirected to the base instance without any additional checks." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 52 } vRtrPimNgAfGenMvpnPersistSA OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenMvpnPersistSA specifies whether the RP will keep advertising the source active route (SA). If the value of vRtrPimNgAfGenMvpnPersistSA is set to 'true', it will force the RP to send the SA on getting a register pdu from the source and RP will not withdraw that SA as long as the null register timer is running." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 53 } vRtrPimNgAfGenUnicastRtRemoval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenUnicastRtRemoval specifies whether to withdraw Type 5 routes or not. If the value of vRtrPimNgAfGenUnicastRtRemoval is 'true' then the expiry of KAT timer triggers withdrawal of Type 5 routes. The withdrawal happens regardless of the value of vRtrPimNgAfGenMvpnPersistSA." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 54 } vRtrPimNgAFGenMvpnOperCMcastSig OBJECT-TYPE SYNTAX INTEGER { none (0), bgp (1), pim (2), inband (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMvpnOperCMcastSig indicates which protocol is being used for PE-to-PE signaling of CE multicast states." ::= { vRtrPimNgAFGenEntry 55 } vRtrPimNgAfGenAutoRPCandidate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenAutoRPCandidate specifies whether auto RP is enabled to advertise candidate-rp information for this PIM protocol instance." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 56 } vRtrPimNgAfGenAutoRPMappingAgent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAfGenAutoRPMappingAgent specifies whether auto RP is enabled to behave as a mapping-agent for this PIM protocol instance." DEFVAL { false } ::= { vRtrPimNgAFGenEntry 57 } vRtrPimNgAfGenAutoRPMAIUAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAfGenAutoRPMAIUAddrType indicates the type of mapping-agent address that is in use." ::= { vRtrPimNgAFGenEntry 58 } vRtrPimNgAfGenAutoRPMAIUAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAfGenAutoRPMAIUAddress indicates the mapping-agent address that is currently in use." ::= { vRtrPimNgAFGenEntry 59 } vRtrPimNgStaticRPTableLstChnged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPTableLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgStaticRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 5 } vRtrPimNgStaticRPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains a list of statically configured Rendezvous Point (RP) addresses." ::= { vRtrPimNgProtocolObjs 6 } vRtrPimNgStaticRPEntry OBJECT-TYPE SYNTAX VRtrPimNgStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgStaticRPTable represents a statically configured Rendezvous Point(RP). An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgStaticRPRowStatus." INDEX { vRtrID, vRtrPimNgStaticRPRPAddressType, vRtrPimNgStaticRPRPAddress } ::= { vRtrPimNgStaticRPTable 1 } VRtrPimNgStaticRPEntry ::= SEQUENCE { vRtrPimNgStaticRPRPAddressType InetAddressType, vRtrPimNgStaticRPRPAddress InetAddress, vRtrPimNgStaticRPRowStatus RowStatus, vRtrPimNgStaticRPRowLastChanged TimeStamp, vRtrPimNgStaticRPOverride TruthValue } vRtrPimNgStaticRPRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPRPAddressType indicates the type of Rendezvous Point (RP) address indicated by vRtrPimNgStaticRPRPAddress." ::= { vRtrPimNgStaticRPEntry 1 } vRtrPimNgStaticRPRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPRPAddress indicates the Rendezvous Point (RP) address that should be used by the router for the range of multicast groups." ::= { vRtrPimNgStaticRPEntry 2 } vRtrPimNgStaticRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPRowStatus is used to create or destroy entries in this table." ::= { vRtrPimNgStaticRPEntry 3 } vRtrPimNgStaticRPRowLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPRowLastChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgStaticRPEntry 4 } vRtrPimNgStaticRPOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgStaticRPOverride specifies the override on the dynamic group-to-RP mappings learned by the router. When the value of this object is set to 'true', then static group-to-RP mappings take precedence over the dynamically learned mappings." DEFVAL { false } ::= { vRtrPimNgStaticRPEntry 5 } vRtrPimNgStGrptoRPTableLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgStGrptoRPTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgStGrptoRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 7 } vRtrPimNgStGrptoRPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgStGrpToRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains a list of statically configured Rendezvous Point (RP) addresses for a multicast group range. Entries can be created or destroyed. If this table does not contain any entries, then the multicast group to RP mapping is derived from the RP-Set messages received from the Bootstrap Router. If the vRtrPimNgStaticRPTable does not contain an entry with the specified vRtrID and vRtrPimNgStGrptoRPRPAddress, an entry is implicitly created in the vRtrPimNgStaticRPTable." ::= { vRtrPimNgProtocolObjs 8 } vRtrPimNgStGrpToRPEntry OBJECT-TYPE SYNTAX VRtrPimNgStGrpToRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgStGrptoRPTable represents a group-to-RP mapping which is statically configured. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgStGrpToRPRowStatus." INDEX { vRtrID, vRtrPimNgStGrptoRPRPAddrType, vRtrPimNgStGrptoRPRPAddress, vRtrPimNgStaticGroupAddrType, vRtrPimNgStaticGroupAddr, vRtrPimNgStaticGroupMask } ::= { vRtrPimNgStGrptoRPTable 1 } VRtrPimNgStGrpToRPEntry ::= SEQUENCE { vRtrPimNgStGrptoRPRPAddrType InetAddressType, vRtrPimNgStGrptoRPRPAddress InetAddress, vRtrPimNgStaticGroupAddrType InetAddressType, vRtrPimNgStaticGroupAddr InetAddress, vRtrPimNgStaticGroupMask InetAddressPrefixLength, vRtrPimNgStGrpToRPRowStatus RowStatus, vRtrPimNgStGrpToRPRowLstChanged TimeStamp } vRtrPimNgStGrptoRPRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStGrptoRPRPAddrType indicates the type of Rendezvous Point (RP) address that should be used by the router for the range of multicast groups." ::= { vRtrPimNgStGrpToRPEntry 1 } vRtrPimNgStGrptoRPRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStGrptoRPRPAddress indicates the Rendezvous Point (RP) address that should be used by the router for the range of multicast groups." ::= { vRtrPimNgStGrpToRPEntry 2 } vRtrPimNgStaticGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStaticGroupAddrType indicates the type of address indicated by vRtrPimNgStaticGroupAddr." ::= { vRtrPimNgStGrpToRPEntry 3 } vRtrPimNgStaticGroupAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStaticGroupAddr combined with the value of vRtrPimNgStaticGroupMask indicates the range of multicast group addresses for which vRtrPimNgStGrptoRPRPAddress is the Rendezvous Point (RP)." ::= { vRtrPimNgStGrpToRPEntry 4 } vRtrPimNgStaticGroupMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgStaticGroupMask indicates the mask which is combined with vRtrPimNgStaticGroupAddr to get the range of multicast group addresses for which vRtrPimNgStGrptoRPRPAddress should be used by the router as the Rendezvous Point (RP)." ::= { vRtrPimNgStGrpToRPEntry 5 } vRtrPimNgStGrpToRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgStGrpToRPRowStatus is used to create or destroy entries in this table." ::= { vRtrPimNgStGrpToRPEntry 6 } vRtrPimNgStGrpToRPRowLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgStGrpToRPRowLstChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgStGrpToRPEntry 7 } vRtrPimNgGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast sources corresponding to the IP multicast groups. This table represents the global PIM source, group database." ::= { vRtrPimNgProtocolObjs 9 } vRtrPimNgGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGrpSrcTable. Each entry represents a source address from which receivers are interested or not interested in receiving multicast traffic." INDEX { vRtrID, vRtrPimNgGrpSrcGrpAddrType, vRtrPimNgGrpSrcGroupAddress, vRtrPimNgGrpSrcSrcAddrType, vRtrPimNgGrpSrcSourceAddress } ::= { vRtrPimNgGrpSrcTable 1 } VRtrPimNgGrpSrcEntry ::= SEQUENCE { vRtrPimNgGrpSrcGrpAddrType InetAddressType, vRtrPimNgGrpSrcGroupAddress InetAddress, vRtrPimNgGrpSrcSrcAddrType InetAddressType, vRtrPimNgGrpSrcSourceAddress InetAddress, vRtrPimNgGrpSrcType INTEGER, vRtrPimNgGrpSrcRPAddrType InetAddressType, vRtrPimNgGrpSrcRPAddr InetAddress, vRtrPimNgGrpSrcRpfNbrAddrType InetAddressType, vRtrPimNgGrpSrcRpfNbrAddr InetAddress, vRtrPimNgGrpSrcRpfIfIndex InterfaceIndexOrZero, vRtrPimNgGrpSrcRptRpfNbrAdrType InetAddressType, vRtrPimNgGrpSrcRptRpfNbrAddr InetAddress, vRtrPimNgGrpSrcMRIBNHopAddrType InetAddressType, vRtrPimNgGrpSrcMRIBNextHopAddr InetAddress, vRtrPimNgGrpSrcMRIBSrcFlags BITS, vRtrPimNgGrpSrcFlags BITS, vRtrPimNgGrpSrcUpstreamJpState INTEGER, vRtrPimNgGrpSrcUpstreamJpTimer Unsigned32, vRtrPimNgGrpSrcUstrmRptJpState INTEGER, vRtrPimNgGrpSrcUstrmRptOvrdeTmr Unsigned32, vRtrPimNgGrpSrcRegisterState INTEGER, vRtrPimNgGrpSrcRegisterStopTmr Unsigned32, vRtrPimNgGrpSrcKeepaliveTimer Unsigned32, vRtrPimNgGrpSrcNumImmediateOif Gauge32, vRtrPimNgGrpSrcNumInheritedOif Gauge32, vRtrPimNgGrpSrcNumInherRptOif Gauge32, vRtrPimNgGrpSrcNumLclRxInclIf Gauge32, vRtrPimNgGrpSrcNumLclRxExclIf Gauge32, vRtrPimNgGrpSrcNumJoinPruneIf Gauge32, vRtrPimNgGrpSrcNumLostAssertIf Gauge32, vRtrPimNgGrpSrcUpTime Unsigned32, vRtrPimNgGrpSrcNumSGRptPruneOif Gauge32, vRtrPimNgGrpSrcRxRegFrmAnycstRP TruthValue, vRtrPimNgGrpSrcRslvdByRtTblType INTEGER, vRtrPimNgGrpSrcCurrFwdingRate Counter32, vRtrPimNgGrpSrcCurrFwdingOFRate Counter32, vRtrPimNgGrpSrcCurrFwdingHCRate Counter64, vRtrPimNgGrpSrcGrpSptThreshold Unsigned32, vRtrPimNgGrpSrcGrpAdminBw Gauge32, vRtrPimNgGrpSrcGrpEcmpOptThresh Unsigned32, vRtrPimNgGrpSrcSpmsiRpfIfIndex InterfaceIndexOrZero, vRtrPimNgGrpSrcRpfSecNbrAddrTyp InetAddressType, vRtrPimNgGrpSrcRpfSecNbrAddr InetAddress, vRtrPimNgGrpSrcRpfSecIfIndex InterfaceIndexOrZero, vRtrPimNgGrpSrcAdvtAddrType InetAddressType, vRtrPimNgGrpSrcAdvtAddr InetAddress, vRtrPimNgGrpSrcStdbyMRIBSrcFlags BITS, vRtrPimNgGrpSrcStdbyUpJpState INTEGER, vRtrPimNgGrpSrcStdbyUpJpTimer Unsigned32, vRtrPimNgGrpSrcDSRpfvNbrType InetAddressType, vRtrPimNgGrpSrcDSRpfvNbr InetAddress, vRtrPimNgGrpSrcDSRpfvProxyType InetAddressType, vRtrPimNgGrpSrcDSRpfvProxy InetAddress, vRtrPimNgGrpSrcDSRpfvRD TmnxVPNRouteDistinguisher, vRtrPimNgGrpSrcDSRpfvType INTEGER, vRtrPimNgGrpSrcUPRpfvNbrType InetAddressType, vRtrPimNgGrpSrcUPRpfvNbr InetAddress, vRtrPimNgGrpSrcUPRpfvProxyType InetAddressType, vRtrPimNgGrpSrcUPRpfvProxy InetAddress, vRtrPimNgGrpSrcUPRpfvRD TmnxVPNRouteDistinguisher, vRtrPimNgGrpSrcUPRpfvType INTEGER, vRtrPimNgGrpSrcRpfvFlags BITS, vRtrPimNgGrpSrcState INTEGER, vRtrPimNgGrpSrcMode INTEGER, vRtrPimNgGrpSrcPruneLimitTimer Unsigned32, vRtrPimNgGrpSrcGraftRetryTimer Unsigned32 } vRtrPimNgGrpSrcGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpAddrType indicates the type of IP multicast group address represented by vRtrPimNgGrpSrcGroupAddress." ::= { vRtrPimNgGrpSrcEntry 1 } vRtrPimNgGrpSrcGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGroupAddress indicates the IP multicast group address for which this entry contains information. If the vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be zero and vRtrPimNgGrpSrcSourceAddress will contain the address of the RP." ::= { vRtrPimNgGrpSrcEntry 2 } vRtrPimNgGrpSrcSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcSrcAddrType indicates the type of IP multicast source address represented by vRtrPimNgGrpSrcSourceAddress." ::= { vRtrPimNgGrpSrcEntry 3 } vRtrPimNgGrpSrcSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcSourceAddress indicates the source address for which this entry contains information. If vRtrPimNgGrpSrcType is 'starG', the value of this object will be zero. If vRtrPimNgGrpSrcType is 'starstarRP', the value of this object will be address of the RP." ::= { vRtrPimNgGrpSrcEntry 4 } vRtrPimNgGrpSrcType OBJECT-TYPE SYNTAX INTEGER { starStarRP (0), starG (1), sg (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcType indicates the type of this entry." ::= { vRtrPimNgGrpSrcEntry 5 } vRtrPimNgGrpSrcRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRPAddrType indicates the type of address of the Rendezvous Point(RP)." ::= { vRtrPimNgGrpSrcEntry 6 } vRtrPimNgGrpSrcRPAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRPAddr indicates the address of the Rendezvous Point(RP)." ::= { vRtrPimNgGrpSrcEntry 7 } vRtrPimNgGrpSrcRpfNbrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfNbrAddrType indicates the type of the address of the RPF neighbor." ::= { vRtrPimNgGrpSrcEntry 8 } vRtrPimNgGrpSrcRpfNbrAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfNbrAddr indicates the address of the RPF neighbor." ::= { vRtrPimNgGrpSrcEntry 9 } vRtrPimNgGrpSrcRpfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfIfIndex indicates the router's interface index on which the RPF neighbor exists." ::= { vRtrPimNgGrpSrcEntry 10 } vRtrPimNgGrpSrcRptRpfNbrAdrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRptRpfNbrAdrType indicates the type of address of the RPF neighbor on the RPT." ::= { vRtrPimNgGrpSrcEntry 11 } vRtrPimNgGrpSrcRptRpfNbrAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRptRpfNbrAddr indicates the address of the RPF neighbor on the RPT." ::= { vRtrPimNgGrpSrcEntry 12 } vRtrPimNgGrpSrcMRIBNHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcMRIBNHopAddrType indicates the type of next hop address towards the RP." ::= { vRtrPimNgGrpSrcEntry 13 } vRtrPimNgGrpSrcMRIBNextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcMRIBNextHopAddr indicates the next hop address towards the RP." ::= { vRtrPimNgGrpSrcEntry 14 } vRtrPimNgGrpSrcMRIBSrcFlags OBJECT-TYPE SYNTAX BITS { self (0), direct (1), remote (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcMRIBSrcFlags indicates the MRIB information about the source. If the entry is of type 'starG' or 'starStarRP', it will contain information about the RP for this group." ::= { vRtrPimNgGrpSrcEntry 15 } vRtrPimNgGrpSrcFlags OBJECT-TYPE SYNTAX BITS { sptBit (0), rptPruneDesired (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcFlags contains information about the state of the entry. This object is applicable only for (S,G) entries,i.e., when vRtrPimNgGrpSrcType is 'sg'. The (S,G) sptBit is used to distinguish whether to forward on (*,*,RP) or (*,G) or on (S,G) state. It is updated when the (S,G) data comes on the RPF interface towards the source. 'rptPruneDesired' is set according to the PruneDesired(S,G,rpt) algorithm." ::= { vRtrPimNgGrpSrcEntry 16 } vRtrPimNgGrpSrcUpstreamJpState OBJECT-TYPE SYNTAX INTEGER { notJoined (0), joined (1), pruned (2), forwarding (3), ackPending (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUpstreamJpState indicates the upstream Join-Prune state. This is a result of sending PIM Join-Prune messages towards the source or the RP." ::= { vRtrPimNgGrpSrcEntry 17 } vRtrPimNgGrpSrcUpstreamJpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUpstreamJpTimer indicates the time remaining before the router sends another Join message to it's upstream neighbor." ::= { vRtrPimNgGrpSrcEntry 18 } vRtrPimNgGrpSrcUstrmRptJpState OBJECT-TYPE SYNTAX INTEGER { notJoinedStarG (0), notPruned (1), pruned (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUstrmRptJpState indicates the upstream RPT Join-Prune state. (S,G,rpt) Joins and Prunes are (S,G) Joins or Prunes sent on the RP tree with the RPT bit set, either to modify the results of (*,G) Joins, or to override the behavior of other upstream LAN peers." ::= { vRtrPimNgGrpSrcEntry 19 } vRtrPimNgGrpSrcUstrmRptOvrdeTmr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUstrmRptOvrdeTmr indicates the delay to triggered Join(S,G,rpt) messages to prevent implosions of triggered messages. If vRtrPimNgGrpSrcUstrmRptOvrdeTmr has a non-zero value, it means that the router was in 'notPruned' state and it saw a Prune(S,G,rpt) message being sent to RPF'(S,G,rpt). If the router sees a Join(S,G,rpt) override message being sent by some other router on the LAN while the timer is still non-zero, it simply cancels the override timer. If it does not see a Join(S,G,rpt) message, then on expiry of the override timer, it sends it's own Join(S,G,rpt) message to RPF'(S,G,rpt). A similar scenario exists when RPF'(S,G,rpt) changes to become equal to RPF'(*,G)." ::= { vRtrPimNgGrpSrcEntry 20 } vRtrPimNgGrpSrcRegisterState OBJECT-TYPE SYNTAX INTEGER { noInfo (0), join (1), joinPending (2), prune (3), nullJoin (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRegisterState indicates the register state. The register state is kept at the source DR. When the host starts sending multicast packets and if there are no entries programmed for that group, the source DR sends a Register packet to the RP(G). Register state transition happen based on the register stop timer and the response received from the RP." ::= { vRtrPimNgGrpSrcEntry 21 } vRtrPimNgGrpSrcRegisterStopTmr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRegisterStopTmr indicates the time remaining before the vRtrPimNgGrpSrcRegisterState might transition to a different state. This timer has a non-zero value when the value of vRtrPimNgGrpSrcRegisterState is not 'noInfo'." ::= { vRtrPimNgGrpSrcEntry 22 } vRtrPimNgGrpSrcKeepaliveTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcKeepaliveTimer is applicable only for (S,G) entries. The (S,G) Keepalive Timer is updated by data being forwarded using this (S,G) forwarding state. It is used to keep (S,G) state alive in the absence of explicit (S,G) Joins." ::= { vRtrPimNgGrpSrcEntry 23 } vRtrPimNgGrpSrcNumImmediateOif OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumImmediateOif indicates the number of interfaces in the immediate outgoing interface list. An outgoing list can be 'immediate' if it is built directly from the state of the relevant type as indicated by vRtrPimNgGrpSrcType." ::= { vRtrPimNgGrpSrcEntry 24 } vRtrPimNgGrpSrcNumInheritedOif OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumInheritedOif indicates the number of interfaces in the inherited outgoing interface list. An 'inherited' list inherits state from other types." ::= { vRtrPimNgGrpSrcEntry 25 } vRtrPimNgGrpSrcNumInherRptOif OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumInherRptOif indicates the number of interfaces in the inherited outgoing interface list for (S,G,Rpt)." ::= { vRtrPimNgGrpSrcEntry 26 } vRtrPimNgGrpSrcNumLclRxInclIf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumLclRxInclIf indicates the number of interfaces in the local membership include interface list. Local membership is the result of the local membership mechanism (IGMP) running on a interface. Include list contains interfaces which are interested in receiving multicast traffic for this source group entry." ::= { vRtrPimNgGrpSrcEntry 27 } vRtrPimNgGrpSrcNumLclRxExclIf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumLclRxExclIf indicates the number of interfaces in the local membership exclude interface list. Local membership is the result of the local membership mechanism (IGMP) running on the interface. Exclude list contains interfaces which are not interested in receiving multicast traffic for this source group entry." ::= { vRtrPimNgGrpSrcEntry 28 } vRtrPimNgGrpSrcNumJoinPruneIf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumJoinPruneIf indicates the number of interfaces on which the router received a Join or Prune message for this source group combination." ::= { vRtrPimNgGrpSrcEntry 29 } vRtrPimNgGrpSrcNumLostAssertIf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumLostAssertIf indicates the number of interfaces on which the router lost assert for this source group combination." ::= { vRtrPimNgGrpSrcEntry 30 } vRtrPimNgGrpSrcUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUpTime indicates the time since this source group entry got created." ::= { vRtrPimNgGrpSrcEntry 31 } vRtrPimNgGrpSrcNumSGRptPruneOif OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcNumSGRptPruneOif indicates the number of interfaces on which the router received (S,G,Rpt) prunes." ::= { vRtrPimNgGrpSrcEntry 32 } vRtrPimNgGrpSrcRxRegFrmAnycstRP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRxRegFrmAnycstRP indicates whether a register message for this source group combination was received from the anycast RP and not from the designated router connected to the source. vRtrPimNgGrpSrcRxRegFrmAnycstRP is not applicable when the value of vRtrPimNgGrpSrcType is starStarRP or starG." ::= { vRtrPimNgGrpSrcEntry 33 } vRtrPimNgGrpSrcRslvdByRtTblType OBJECT-TYPE SYNTAX INTEGER { none (0), mucastRouteTable (1), ucastRouteTable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRslvdByRtTblType indicates which unicast routing table was used to resolve this source group entry. The value of this object will be 'mucastRouteTable' if the source or rendezvous point (RP) is resolved by the multicast-unicast route table. The value of this object will be 'ucastRouteTable' if the source or rendezvous point (RP) is resolved by the unicast route table. The value will be 'none' if the source or RP is unresolved." ::= { vRtrPimNgGrpSrcEntry 34 } vRtrPimNgGrpSrcCurrFwdingRate OBJECT-TYPE SYNTAX Counter32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcCurrFwdingRate indicates the current forwarding rate being used by a source group(S,G) entry or (*,G) entry, where * means any source entry, for the traffic in bits per second(bps). This forwarding rate is calculated before ingress QoS policing or shaping is applied." ::= { vRtrPimNgGrpSrcEntry 35 } vRtrPimNgGrpSrcCurrFwdingOFRate OBJECT-TYPE SYNTAX Counter32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcCurrFwdingOFRate indicates the number of times associated vRtrPimNgGrpSrcCurrFwdingRate counter has overflowed." ::= { vRtrPimNgGrpSrcEntry 36 } vRtrPimNgGrpSrcCurrFwdingHCRate OBJECT-TYPE SYNTAX Counter64 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcCurrFwdingHCRate indicates the current forwarding rate being used by a source group(S,G) entry or (*,G) entry, where * means any source entry, for the traffic in bits per second(bps)." ::= { vRtrPimNgGrpSrcEntry 37 } vRtrPimNgGrpSrcGrpSptThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpSptThreshold indicates the configured threshold in kilobits per second(kbps) for the group to which this (S,G) belongs. For a group G configured with a threshold, switchover to SPT for an (S,G) is attempted only if the (S,G)'s rate exceeds this configured threshold." ::= { vRtrPimNgGrpSrcEntry 38 } vRtrPimNgGrpSrcGrpAdminBw OBJECT-TYPE SYNTAX Gauge32 (0..40000000) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpAdminBw indicates the administrative bandwidth in kilobits per second(kbps) for the group to which this (S,G) belongs." ::= { vRtrPimNgGrpSrcEntry 39 } vRtrPimNgGrpSrcGrpEcmpOptThresh OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpEcmpOptThresh indicates the optional threshold value for ECMP balancing." ::= { vRtrPimNgGrpSrcEntry 40 } vRtrPimNgGrpSrcSpmsiRpfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcSpmsiRpfIfIndex indicates in an MVPN scenario the router's SPMSI interface index, if any, on which the RPF neighbor exists." ::= { vRtrPimNgGrpSrcEntry 41 } vRtrPimNgGrpSrcRpfSecNbrAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfSecNbrAddrTyp indicates the type of the address of the secondary RPF neighbor. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy. When MVPN is configured with source redundancy, MVPN is capable of receiving traffic from two different PEs for the same source." ::= { vRtrPimNgGrpSrcEntry 42 } vRtrPimNgGrpSrcRpfSecNbrAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfSecNbrAddr indicates the address of the secondary RPF neighbor. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy." ::= { vRtrPimNgGrpSrcEntry 43 } vRtrPimNgGrpSrcRpfSecIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfSecIfIndex indicates the router's interface index on which the secondary RPF neighbor exists. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy." ::= { vRtrPimNgGrpSrcEntry 44 } vRtrPimNgGrpSrcAdvtAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcAdvtAddrType indicates the type of the address of vRtrPimNgGrpSrcAdvtAddr." ::= { vRtrPimNgGrpSrcEntry 45 } vRtrPimNgGrpSrcAdvtAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcAdvtAddr indicates the router address that advertised the route to the source indicated by vRtrPimNgGrpSrcSourceAddress." ::= { vRtrPimNgGrpSrcEntry 46 } vRtrPimNgGrpSrcStdbyMRIBSrcFlags OBJECT-TYPE SYNTAX BITS { self (0), direct (1), remote (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStdbyMRIBSrcFlags indicates the MRIB information about the source reachable through the standby RPF interface. This object is applicable only for (S,G) entries,i.e., when vRtrPimNgGrpSrcType is 'sg'." ::= { vRtrPimNgGrpSrcEntry 47 } vRtrPimNgGrpSrcStdbyUpJpState OBJECT-TYPE SYNTAX INTEGER { notJoined (0), joined (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStdbyUpJpState indicates the standby RPF Join-Prune state. This object is applicable only for (S,G) entries,i.e., when vRtrPimNgGrpSrcType is 'sg'." ::= { vRtrPimNgGrpSrcEntry 48 } vRtrPimNgGrpSrcStdbyUpJpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStdbyUpJpTimer indicates the time remaining before the router sends another Join message to it's upstream neighbor reachable through the standby RPF interface. This object is applicable only for (S,G) entries,i.e., when vRtrPimNgGrpSrcType is 'sg'." ::= { vRtrPimNgGrpSrcEntry 49 } vRtrPimNgGrpSrcDSRpfvNbrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvNbrType indicates the type of address of the downstream RPF vector neighbor." ::= { vRtrPimNgGrpSrcEntry 50 } vRtrPimNgGrpSrcDSRpfvNbr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvNbr indicates the address of the downstream RPF vector neighbor." ::= { vRtrPimNgGrpSrcEntry 51 } vRtrPimNgGrpSrcDSRpfvProxyType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvProxyType indicates the type of address of the downstream RPF vector proxy." ::= { vRtrPimNgGrpSrcEntry 52 } vRtrPimNgGrpSrcDSRpfvProxy OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvProxy indicates the address of the downstream RPF vector proxy." ::= { vRtrPimNgGrpSrcEntry 53 } vRtrPimNgGrpSrcDSRpfvRD OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvRD indicates the downstream RPF vector Route Distinguisher." ::= { vRtrPimNgGrpSrcEntry 54 } vRtrPimNgGrpSrcDSRpfvType OBJECT-TYPE SYNTAX INTEGER { none (0), mvpn (1), core (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcDSRpfvType indicates the downstream RPF vector type." ::= { vRtrPimNgGrpSrcEntry 55 } vRtrPimNgGrpSrcUPRpfvNbrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvNbrType indicates the type of address of the upstream RPF vector neighbor." ::= { vRtrPimNgGrpSrcEntry 56 } vRtrPimNgGrpSrcUPRpfvNbr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvNbr indicates the address of the upstream RPF vector neighbor." ::= { vRtrPimNgGrpSrcEntry 57 } vRtrPimNgGrpSrcUPRpfvProxyType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvProxyType indicates the type of address of the upstream RPF vector proxy." ::= { vRtrPimNgGrpSrcEntry 58 } vRtrPimNgGrpSrcUPRpfvProxy OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvProxy indicates the address of the upstream RPF vector proxy." ::= { vRtrPimNgGrpSrcEntry 59 } vRtrPimNgGrpSrcUPRpfvRD OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvRD indicates the upstream RPF vector Route Distinguisher." ::= { vRtrPimNgGrpSrcEntry 60 } vRtrPimNgGrpSrcUPRpfvType OBJECT-TYPE SYNTAX INTEGER { none (0), mvpn (1), core (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcUPRpfvType indicates the upstream RPF vector type." ::= { vRtrPimNgGrpSrcEntry 61 } vRtrPimNgGrpSrcRpfvFlags OBJECT-TYPE SYNTAX BITS { upNbrNoJa (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcRpfvFlags indicates the state of the rpf-vectors. When the bit 'upNbrNoJa' is set, it indicates that the upstream neighbor towards the rpf-vector proxy does not support join-attributes." ::= { vRtrPimNgGrpSrcEntry 62 } vRtrPimNgGrpSrcState OBJECT-TYPE SYNTAX INTEGER { none (0), active (1), standby (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The values of vRtrPimNgGrpSrcState indicates the current state of the (S,G)." ::= { vRtrPimNgGrpSrcEntry 63 } vRtrPimNgGrpSrcMode OBJECT-TYPE SYNTAX INTEGER { none (0), sparse (1), dense (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The values of vRtrPimNgGrpSrcMode indicates the mode of operation for the (S,G)." ::= { vRtrPimNgGrpSrcEntry 64 } vRtrPimNgGrpSrcPruneLimitTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcPruneLimitTimer indicates the time until which no prunes will be sent upstream." ::= { vRtrPimNgGrpSrcEntry 65 } vRtrPimNgGrpSrcGraftRetryTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGraftRetryTimer indicates the time interval between which two grafts are sent upstream and no ack is received from the upstream router." ::= { vRtrPimNgGrpSrcEntry 66 } vRtrPimNgGrpSrcIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGrpSrcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the PIM enabled interfaces for an entry in vRtrPimNgGrpSrcTable." ::= { vRtrPimNgProtocolObjs 10 } vRtrPimNgGrpSrcIfEntry OBJECT-TYPE SYNTAX VRtrPimNgGrpSrcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGrpSrcIfTable. Each entry represents the state of the PIM enabled interface for every vRtrPimNgGrpSrcEntry." INDEX { vRtrID, vRtrPimNgGrpSrcGrpAddrType, vRtrPimNgGrpSrcGroupAddress, vRtrPimNgGrpSrcSrcAddrType, vRtrPimNgGrpSrcSourceAddress, vRtrIfIndex } ::= { vRtrPimNgGrpSrcIfTable 1 } VRtrPimNgGrpSrcIfEntry ::= SEQUENCE { vRtrPimNgGrpSrcIfFlags BITS, vRtrPimNgGrpSrcSpmsiIfIndex InterfaceIndexOrZero } vRtrPimNgGrpSrcIfFlags OBJECT-TYPE SYNTAX BITS { immediateOifList (0), inheritedOifList (1), inheritedRptOifList (2), localRxInclude (3), localRxExclude (4), joinPruneList (5), lostAssertList (6), sgRptPruneOifList (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcIfFlags indicates the different lists that this interface belongs to." ::= { vRtrPimNgGrpSrcIfEntry 1 } vRtrPimNgGrpSrcSpmsiIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcSpmsiIfIndex indicates in an MVPN scenario the router's SPMSI interface index, if any, corresponding to the outgoing IPMSI interface." ::= { vRtrPimNgGrpSrcIfEntry 2 } vRtrPimNgCRPGrpPrfxTblLstChnged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrfxTblLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgCRPGrpPrefixTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 11 } vRtrPimNgCRPGrpPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgCRPGrpPrefixEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrPimNgCRPGrpPrefixTable lists the group prefixes for which the router sends the Candidate RP Advertisement. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgCRPGrpPrefixInetTable to support ipv6 address." ::= { vRtrPimNgProtocolObjs 12 } vRtrPimNgCRPGrpPrefixEntry OBJECT-TYPE SYNTAX VRtrPimNgCRPGrpPrefixEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vRtrPimNgCRPGrpPrefixTable. Each entry represents the group prefix for which the router sends the Candidate RP Advertisement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR router(E-BSR)." INDEX { vRtrID, vRtrPimNgCRPGrpPrfixGrpAddrType, vRtrPimNgCRPGrpPrefixGrpAddr, vRtrPimNgCRPGrpPrefixGrpMask } ::= { vRtrPimNgCRPGrpPrefixTable 1 } VRtrPimNgCRPGrpPrefixEntry ::= SEQUENCE { vRtrPimNgCRPGrpPrfixGrpAddrType InetAddressType, vRtrPimNgCRPGrpPrefixGrpAddr InetAddress, vRtrPimNgCRPGrpPrefixGrpMask IpAddressPrefixLength, vRtrPimNgCRPGrpPrefixRowStatus RowStatus, vRtrPimNgCRPGrpPrfixRowLstChngd TimeStamp } vRtrPimNgCRPGrpPrfixGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrfixGrpAddrType indicates the type of address represented by vRtrPimNgCRPGrpPrefixGrpAddr." ::= { vRtrPimNgCRPGrpPrefixEntry 1 } vRtrPimNgCRPGrpPrefixGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrefixGrpAddr combined with the value of vRtrPimNgCRPGrpPrefixGrpMask indicates the range of multicast group addresses for which the router advertises to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address." ::= { vRtrPimNgCRPGrpPrefixEntry 2 } vRtrPimNgCRPGrpPrefixGrpMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrefixGrpMask indicates the mask which is combined with the value of vRtrPimNgCRPGrpPrefixGrpAddr to get the range of multicast group addresses for which the router advertises to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address." ::= { vRtrPimNgCRPGrpPrefixEntry 3 } vRtrPimNgCRPGrpPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrefixRowStatus is used to create or destroy entries in this table." ::= { vRtrPimNgCRPGrpPrefixEntry 4 } vRtrPimNgCRPGrpPrfixRowLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpPrfixRowLstChngd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgCRPGrpPrefixEntry 5 } vRtrPimNgCRPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgCRPEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrPimNgCRPTable lists the C-RPs and the group prefixes sent in the C-RP advertisement. vRtrPimNgCRPTable will be empty on all routers except the elected BSR router. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgCRPInetTable to support ipv6 address." ::= { vRtrPimNgProtocolObjs 13 } vRtrPimNgCRPEntry OBJECT-TYPE SYNTAX VRtrPimNgCRPEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vRtrPimNgCRPTable. It is created when the Elected BSR receives a Candidate-RP Advertisement from the C-RPs." INDEX { vRtrID, vRtrPimNgCRPAddressType, vRtrPimNgCRPAddress, vRtrPimNgCRPGrpAddrType, vRtrPimNgCRPGrpAddr, vRtrPimNgCRPGrpMask } ::= { vRtrPimNgCRPTable 1 } VRtrPimNgCRPEntry ::= SEQUENCE { vRtrPimNgCRPAddressType InetAddressType, vRtrPimNgCRPAddress InetAddress, vRtrPimNgCRPGrpAddrType InetAddressType, vRtrPimNgCRPGrpAddr InetAddress, vRtrPimNgCRPGrpMask IpAddressPrefixLength, vRtrPimNgCRPHoldtime Integer32, vRtrPimNgCRPPriority Integer32, vRtrPimNgCRPExpiryTime Integer32 } vRtrPimNgCRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPAddressType indicates the type of address of the Candidate RP." ::= { vRtrPimNgCRPEntry 1 } vRtrPimNgCRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPAddress indicates the Candidate RP address." ::= { vRtrPimNgCRPEntry 2 } vRtrPimNgCRPGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpAddrType indicates the type of the address represented by vRtrPimNgCRPGrpAddr." ::= { vRtrPimNgCRPEntry 3 } vRtrPimNgCRPGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpAddr combined with the value of vRtrPimNgCRPGrpMask indicates the range of multicast group addresses for which vRtrPimNgCRPAddress is the Candidate RP." ::= { vRtrPimNgCRPEntry 4 } vRtrPimNgCRPGrpMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPGrpMask indicates the mask which is combined with vRtrPimNgCRPGrpAddr to get the range of multicast group addresses for which vRtrPimNgCRPAddress is the Candidate RP." ::= { vRtrPimNgCRPEntry 5 } vRtrPimNgCRPHoldtime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period." ::= { vRtrPimNgCRPEntry 6 } vRtrPimNgCRPPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority." ::= { vRtrPimNgCRPEntry 7 } vRtrPimNgCRPExpiryTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgCRPExpiryTime indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0." ::= { vRtrPimNgCRPEntry 8 } vRtrPimNgRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRPSetEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table lists the RP Set sent by the Elected BSR in the Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in case of Auto-RP. It also contains the static entries in vRtrPimNgStGrptoRPTable. The router uses this table to calculate the group-to-RP mappings. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgRPSetInetTable to support ipv6 address." ::= { vRtrPimNgProtocolObjs 14 } vRtrPimNgRPSetEntry OBJECT-TYPE SYNTAX VRtrPimNgRPSetEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vRtrPimNgRPSetTable. It is created by the elected BSR when it receives the Candidate-RP-Adv messages. Other routers create this entry on receiving Bootstrap Message(BSM) sent by the elected BSR router. It can also be created when a router receives a Mapping message from the Auto-RP Mapping Agent." INDEX { vRtrID, vRtrPimNgRPSetType, vRtrPimNgRPSetGrpAddrType, vRtrPimNgRPSetGrpAddr, vRtrPimNgRPSetGrpMask, vRtrPimNgRPSetCRPAddrType, vRtrPimNgRPSetCRPAddress } ::= { vRtrPimNgRPSetTable 1 } VRtrPimNgRPSetEntry ::= SEQUENCE { vRtrPimNgRPSetType INTEGER, vRtrPimNgRPSetGrpAddrType InetAddressType, vRtrPimNgRPSetGrpAddr InetAddress, vRtrPimNgRPSetGrpMask IpAddressPrefixLength, vRtrPimNgRPSetCRPAddrType InetAddressType, vRtrPimNgRPSetCRPAddress InetAddress, vRtrPimNgRPSetHoldtime Integer32, vRtrPimNgRPSetPriority Integer32, vRtrPimNgRPSetExpiryTime Unsigned32 } vRtrPimNgRPSetType OBJECT-TYPE SYNTAX INTEGER { dynamic (1), static (2), auto-rp (3) } MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrPimNgRPSetType is an index into this table. It indicates whether the entry was learned through the bootstrap mechanism or if it was statically configured using the vRtrPimNgStGrptoRPTable." ::= { vRtrPimNgRPSetEntry 1 } vRtrPimNgRPSetGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetGrpAddrType indicates the type of address represented by vRtrPimNgRPSetGrpAddr." ::= { vRtrPimNgRPSetEntry 2 } vRtrPimNgRPSetGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetGrpAddr, combined with the value of vRtrPimNgRPSetGrpMask, indicates the range of multicast group addresses for which vRtrPimNgRPSetCRPAddress is the Candidate RP." ::= { vRtrPimNgRPSetEntry 3 } vRtrPimNgRPSetGrpMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrPimNgRPSetGrpMask indicates the mask which is combined with vRtrPimNgRPSetGrpAddr to get the range of multicast group addresses for which vRtrPimNgRPSetCRPAddress is the candidate RP." ::= { vRtrPimNgRPSetEntry 4 } vRtrPimNgRPSetCRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetCRPAddrType indicates the type of address of the Candidate RP address." ::= { vRtrPimNgRPSetEntry 5 } vRtrPimNgRPSetCRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetCRPAddress indicates the Candidate RP address." ::= { vRtrPimNgRPSetEntry 6 } vRtrPimNgRPSetHoldtime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period. The value of vRtrPimNgRPSetHoldtime will be zero for static entries." ::= { vRtrPimNgRPSetEntry 7 } vRtrPimNgRPSetPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority. For static entries, the priority is always 1." ::= { vRtrPimNgRPSetEntry 8 } vRtrPimNgRPSetExpiryTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrPimNgRPSetExpiryTime indicates the minimum time remaining before the RP Set group prefix will be declared down." ::= { vRtrPimNgRPSetEntry 9 } vRtrPimNgGenStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGenStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgGenStatTable lists PIM statistics for a particular PIM instance." ::= { vRtrPimNgProtocolObjs 15 } vRtrPimNgGenStatEntry OBJECT-TYPE SYNTAX VRtrPimNgGenStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGenStatTable." AUGMENTS { vRtrPimNgAFGenEntry } ::= { vRtrPimNgGenStatTable 1 } VRtrPimNgGenStatEntry ::= SEQUENCE { vRtrPimNgGenStatTxCrpaPdus Counter32, vRtrPimNgGenStatTxCrpaPduErrs Counter32, vRtrPimNgGenStatRxCrpaPdus Counter32, vRtrPimNgGenStatRxCrpaPduDrops Counter32, vRtrPimNgGenStatStarStarRPTypes Gauge32, vRtrPimNgGenStatStarGTypes Gauge32, vRtrPimNgGenStatSGTypes Gauge32, vRtrPimNgGenStatTxRegisters Counter32, vRtrPimNgGenStatTxRegisterErrs Counter32, vRtrPimNgGenStatTxNullRegisters Counter32, vRtrPimNgGenStatTxRegTTLDrops Counter32, vRtrPimNgGenStatForwardCrpaPdus Counter32, vRtrPimNgGenStatFwdCrpaDrops Counter32, vRtrPimNgGenStatTxMdtJoinTlvs Counter32, vRtrPimNgGenStatRxMdtJoinTlvs Counter32, vRtrPimNgGenStatTxMdtJnTlvErrs Counter32, vRtrPimNgGenStatRxMdtJnTlvErrs Counter32, vRtrPimNgGenStatTxActiveMdts Gauge32, vRtrPimNgGenStatRxActiveMdts Gauge32, vRtrPimNgGenStatTxSpmsiLimitHits Counter32, vRtrPimNgGenStatRxCtrlPduIfDrops Counter32, vRtrPimNgGenStatP2mpPmsiReqFails Counter32, vRtrPimNgGenStatP2mpPmsiCrtFails Counter32, vRtrPimNgGenStatTxMdts Counter32, vRtrPimNgGenStatRxMdts Counter32, vRtrPimNgGenStatRxActvPsuedoMdts Counter32, vRtrPimNgGenStatTxMsActiveMdts Counter32 } vRtrPimNgGenStatTxCrpaPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxCrpaPdus indicates the number of PIM Candidate-RP Advertisements (C-RP-Adv) transmitted by this router instance." ::= { vRtrPimNgGenStatEntry 1 } vRtrPimNgGenStatTxCrpaPduErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxCrpaPduErrs indicates the number of errors while transmitting PIM Candidate-RP Advertisements (C-RP-Adv)." ::= { vRtrPimNgGenStatEntry 2 } vRtrPimNgGenStatRxCrpaPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxCrpaPdus indicates the number of PIM Candidate-RP Advertisements (C-RP-Adv) received by this instance." ::= { vRtrPimNgGenStatEntry 3 } vRtrPimNgGenStatRxCrpaPduDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxCrpaPduDrops indicates the number of PIM Candidate-RP Advertisements (C-RP-Adv) received by this instance, but were dropped." ::= { vRtrPimNgGenStatEntry 4 } vRtrPimNgGenStatStarStarRPTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatStarStarRPTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'starStarRP'." ::= { vRtrPimNgGenStatEntry 5 } vRtrPimNgGenStatStarGTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatStarGTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'starG'." ::= { vRtrPimNgGenStatEntry 6 } vRtrPimNgGenStatSGTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatSGTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'sg'." ::= { vRtrPimNgGenStatEntry 7 } vRtrPimNgGenStatTxRegisters OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxRegisters indicates the number of PIM Register messages transmitted by this instance." ::= { vRtrPimNgGenStatEntry 8 } vRtrPimNgGenStatTxRegisterErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxRegisterErrs indicates the number the times there was an error while transmitting PIM Register messages by this instance." ::= { vRtrPimNgGenStatEntry 9 } vRtrPimNgGenStatTxNullRegisters OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxNullRegisters indicates the number of PIM Null Register messages transmitted by this instance." ::= { vRtrPimNgGenStatEntry 10 } vRtrPimNgGenStatTxRegTTLDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxRegTTLDrops indicates the number of multicast data packets which could not be encapsulated in Register messages because the Time To Live (TTL) was zero." ::= { vRtrPimNgGenStatEntry 11 } vRtrPimNgGenStatForwardCrpaPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatForwardCrpaPdus indicates the number of Candidate-RP Advertisements(C-RP-Adv) that were forwarded by the router. C-RP-Advs are forwarded when the received advertisement has a router alert set and the destination address is not the router's local address." ::= { vRtrPimNgGenStatEntry 12 } vRtrPimNgGenStatFwdCrpaDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatFwdCrpaDrops indicates the number of times the Candidate-RP Advertisements(C-RP-Adv) could not be forwarded by the router." ::= { vRtrPimNgGenStatEntry 13 } vRtrPimNgGenStatTxMdtJoinTlvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxMdtJoinTlvs indicates the number of times MDT Join TLV were transmitted." ::= { vRtrPimNgGenStatEntry 14 } vRtrPimNgGenStatRxMdtJoinTlvs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxMdtJoinTlvs indicates the number of times MDT Join TLV were received." ::= { vRtrPimNgGenStatEntry 15 } vRtrPimNgGenStatTxMdtJnTlvErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxMdtJnTlvErrs indicates indicates the number of times MDT Join TLV could not be transmitted." ::= { vRtrPimNgGenStatEntry 16 } vRtrPimNgGenStatRxMdtJnTlvErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxMdtJnTlvErrs indicates indicates number of times MDT Join TLVs were dropped due to errors in the received TLV." ::= { vRtrPimNgGenStatEntry 17 } vRtrPimNgGenStatTxActiveMdts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxActiveMdts indicates the number of active MDTs on which the PE is forwarding packets. This object is applicable to VPRNs only." ::= { vRtrPimNgGenStatEntry 18 } vRtrPimNgGenStatRxActiveMdts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxActiveMdts indicates number of active Mdts on which the PE is receiving packets. This object is applicable to VPRNs only." ::= { vRtrPimNgGenStatEntry 19 } vRtrPimNgGenStatTxSpmsiLimitHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxSpmsiLimitHits indicates the number of times the switch from ipmsi to spmsi is failed because of reaching the maximum spmsi limit configured in TIMETRA-VRTR-MIB::vRtrMvpnSpmsiMaxLimit." ::= { vRtrPimNgGenStatEntry 20 } vRtrPimNgGenStatRxCtrlPduIfDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxCtrlPduIfDrops indicates the number of control PDU drops on an interface which is operationally down or on an interface on which PIM is not enabled." ::= { vRtrPimNgGenStatEntry 21 } vRtrPimNgGenStatP2mpPmsiReqFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatP2mpPmsiReqFails indicates the number of times a P2MP PMSI tunnel request has failed." ::= { vRtrPimNgGenStatEntry 22 } vRtrPimNgGenStatP2mpPmsiCrtFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatP2mpPmsiCrtFails indicates the number of times a P2MP PMSI tunnel creation has failed." ::= { vRtrPimNgGenStatEntry 23 } vRtrPimNgGenStatTxMdts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxMdts indicates the number of MDTs created by the PE for forwarding packets. This object is applicable to VPRNs only." ::= { vRtrPimNgGenStatEntry 24 } vRtrPimNgGenStatRxMdts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxMdts indicates the number of MDTs created by the PE for receiving packets. This object is applicable to VPRNs only." ::= { vRtrPimNgGenStatEntry 25 } vRtrPimNgGenStatRxActvPsuedoMdts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatRxActvPsuedoMdts indicates the number of active Mdts on which the pseudo PE is receiving packets. This object is applicable to VPRNs only." ::= { vRtrPimNgGenStatEntry 26 } vRtrPimNgGenStatTxMsActiveMdts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGenStatTxMsActiveMdts indicates the number of active MDTs on which the PE is forwarding packets. This S-PMSI is threshold controlled." ::= { vRtrPimNgGenStatEntry 27 } vRtrPimNgGrpSrcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGrpSrcStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgGrpSrcStatTable contains statistics for the entries in the vRtrPimNgGrpSrcTable. These statistics are collected by the forwarding engine." ::= { vRtrPimNgProtocolObjs 16 } vRtrPimNgGrpSrcStatEntry OBJECT-TYPE SYNTAX VRtrPimNgGrpSrcStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGrpSrcStatTable." AUGMENTS { vRtrPimNgGrpSrcEntry } ::= { vRtrPimNgGrpSrcStatTable 1 } VRtrPimNgGrpSrcStatEntry ::= SEQUENCE { vRtrPimNgGrpSrcStatFrwdedPkts Counter32, vRtrPimNgGrpSrcStatOFFrwdedPkts Counter32, vRtrPimNgGrpSrcStatHCFrwdedPkts Counter64, vRtrPimNgGrpSrcStatDscrdPkts Counter32, vRtrPimNgGrpSrcStatOFDscrdPkts Counter32, vRtrPimNgGrpSrcStatHCDscrdPkts Counter64, vRtrPimNgGrpSrcStatRPFMsmtch Counter32, vRtrPimNgGrpSrcStatOFRPFMsmtch Counter32, vRtrPimNgGrpSrcStatHCRPFMsmtch Counter64, vRtrPimNgGrpSrcStatFrdedOct Counter32, vRtrPimNgGrpSrcStatOFFrdedOct Counter32, vRtrPimNgGrpSrcStatHCFrdedOct Counter64 } vRtrPimNgGrpSrcStatFrwdedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatFrwdedPkts indicates the number of multicast packets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list. This packet count is calculated before ingress QoS policing or shaping is applied." ::= { vRtrPimNgGrpSrcStatEntry 1 } vRtrPimNgGrpSrcStatOFFrwdedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatOFFrwdedPkts indicates the number of times the associated vRtrPimNgGrpSrcStatFrwdedPkts counter has overflowed." ::= { vRtrPimNgGrpSrcStatEntry 2 } vRtrPimNgGrpSrcStatHCFrwdedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatHCFrwdedPkts indicates the number of multicast packets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list." ::= { vRtrPimNgGrpSrcStatEntry 3 } vRtrPimNgGrpSrcStatDscrdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatDscrdPkts indicates the number of multicast packets that matched this source group entry but were discarded. For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded." ::= { vRtrPimNgGrpSrcStatEntry 4 } vRtrPimNgGrpSrcStatOFDscrdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatOFDscrdPkts indicates the number of times the associated vRtrPimNgGrpSrcStatDscrdPkts counter has overflowed." ::= { vRtrPimNgGrpSrcStatEntry 5 } vRtrPimNgGrpSrcStatHCDscrdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatHCDscrdPkts indicates the number of multicast packets that matched this source group entry but were discarded. For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded." ::= { vRtrPimNgGrpSrcStatEntry 6 } vRtrPimNgGrpSrcStatRPFMsmtch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatRPFMsmtch indicates the number of multicast packets that matched this source group entry but they did not arrive on the the interface indicated by vRtrPimNgGrpSrcRpfIfIndex." ::= { vRtrPimNgGrpSrcStatEntry 7 } vRtrPimNgGrpSrcStatOFRPFMsmtch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatOFRPFMsmtch indicates the number of times the associated vRtrPimNgGrpSrcStatRPFMsmtch counter has overflowed." ::= { vRtrPimNgGrpSrcStatEntry 8 } vRtrPimNgGrpSrcStatHCRPFMsmtch OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatHCRPFMsmtch indicates the number of multicast packets that matched this source group entry but they did not arrive on the the interface indicated by vRtrPimNgGrpSrcRpfIfIndex." ::= { vRtrPimNgGrpSrcStatEntry 9 } vRtrPimNgGrpSrcStatFrdedOct OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatFrdedOct indicates the number of multicast octets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list." ::= { vRtrPimNgGrpSrcStatEntry 10 } vRtrPimNgGrpSrcStatOFFrdedOct OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatOFFrdedOct indicates the number of times the associated vRtrPimNgGrpSrcStatFrdedOct counter has overflowed." ::= { vRtrPimNgGrpSrcStatEntry 11 } vRtrPimNgGrpSrcStatHCFrdedOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcStatHCFrdedOct indicates the number of multicast octets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list." ::= { vRtrPimNgGrpSrcStatEntry 12 } vRtrPimNgGenPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGenPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgGenPolicyTable lists PIM policies for a particular PIM instance. PIM Join-Prune and Register policies provide a way to to control the creation of (*,G) or (S,G) state that gets created on a router. The bootstrap policies provide a way to control the flow of bootstrap messages to and from the router. PIM Policies are created using the TIMETRA-ROUTE-POLICY-MIB::tRPAdminPSFromCriteriaTable." ::= { vRtrPimNgProtocolObjs 17 } vRtrPimNgGenPolicyEntry OBJECT-TYPE SYNTAX VRtrPimNgGenPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGenPolicyTable. Each entry corresponds to an entry in the vRtrPimNgGeneralTable. Entries in this table are created implicitly whenever an entry is created in the vRtrPimNgGeneralTable." AUGMENTS { vRtrPimNgGeneralEntry } ::= { vRtrPimNgGenPolicyTable 1 } VRtrPimNgGenPolicyEntry ::= SEQUENCE { vRtrPimNgImportJoinPrunePolicy1 TNamedItemOrEmpty, vRtrPimNgImportJoinPrunePolicy2 TNamedItemOrEmpty, vRtrPimNgImportJoinPrunePolicy3 TNamedItemOrEmpty, vRtrPimNgImportJoinPrunePolicy4 TNamedItemOrEmpty, vRtrPimNgImportJoinPrunePolicy5 TNamedItemOrEmpty, vRtrPimNgImportRegisterPolicy1 TNamedItemOrEmpty, vRtrPimNgImportRegisterPolicy2 TNamedItemOrEmpty, vRtrPimNgImportRegisterPolicy3 TNamedItemOrEmpty, vRtrPimNgImportRegisterPolicy4 TNamedItemOrEmpty, vRtrPimNgImportRegisterPolicy5 TNamedItemOrEmpty, vRtrPimNgImportBootstrapPolicy1 TNamedItemOrEmpty, vRtrPimNgImportBootstrapPolicy2 TNamedItemOrEmpty, vRtrPimNgImportBootstrapPolicy3 TNamedItemOrEmpty, vRtrPimNgImportBootstrapPolicy4 TNamedItemOrEmpty, vRtrPimNgImportBootstrapPolicy5 TNamedItemOrEmpty, vRtrPimNgExportBootstrapPolicy1 TNamedItemOrEmpty, vRtrPimNgExportBootstrapPolicy2 TNamedItemOrEmpty, vRtrPimNgExportBootstrapPolicy3 TNamedItemOrEmpty, vRtrPimNgExportBootstrapPolicy4 TNamedItemOrEmpty, vRtrPimNgExportBootstrapPolicy5 TNamedItemOrEmpty } vRtrPimNgImportJoinPrunePolicy1 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportJoinPrunePolicy1 is the the first policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 1 } vRtrPimNgImportJoinPrunePolicy2 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportJoinPrunePolicy2 is the second policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 2 } vRtrPimNgImportJoinPrunePolicy3 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportJoinPrunePolicy3 is the third policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 3 } vRtrPimNgImportJoinPrunePolicy4 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportJoinPrunePolicy4 is the fourth policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 4 } vRtrPimNgImportJoinPrunePolicy5 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportJoinPrunePolicy5 is the fifth policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 5 } vRtrPimNgImportRegisterPolicy1 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportRegisterPolicy1 is the the first policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 6 } vRtrPimNgImportRegisterPolicy2 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportRegisterPolicy2 is the the second policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 7 } vRtrPimNgImportRegisterPolicy3 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportRegisterPolicy3 is the the third policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 8 } vRtrPimNgImportRegisterPolicy4 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportRegisterPolicy4 is the the fourth policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 9 } vRtrPimNgImportRegisterPolicy5 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgImportRegisterPolicy5 is the the fifth policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 10 } vRtrPimNgImportBootstrapPolicy1 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportBootstrapPolicy1 is the the first policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 11 } vRtrPimNgImportBootstrapPolicy2 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportBootstrapPolicy2 is the the second policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 12 } vRtrPimNgImportBootstrapPolicy3 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportBootstrapPolicy3 is the the third policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 13 } vRtrPimNgImportBootstrapPolicy4 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgImportBootstrapPolicy4 is the the fourth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 14 } vRtrPimNgImportBootstrapPolicy5 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgImportBootstrapPolicy5 is the the fifth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 15 } vRtrPimNgExportBootstrapPolicy1 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgExportBootstrapPolicy1 is the the first policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 16 } vRtrPimNgExportBootstrapPolicy2 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgExportBootstrapPolicy2 is the the second policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 17 } vRtrPimNgExportBootstrapPolicy3 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgExportBootstrapPolicy3 is the the third policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 18 } vRtrPimNgExportBootstrapPolicy4 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgExportBootstrapPolicy4 is the the fourth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 19 } vRtrPimNgExportBootstrapPolicy5 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgExportBootstrapPolicy5 is the the fifth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } ::= { vRtrPimNgGenPolicyEntry 20 } vRtrPimNgSSMGroupTableLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgSSMGroupTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 18 } vRtrPimNgSSMGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgSSMGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgSSMGroupTable contains a range of group addresses which are reserved for Source Specific Multicast(SSM). The SSM standard designates IPv4 addresses in the 232/8 range and IPv6 addresses in FF3X:0000:/32 range for SSM destination addresses. This table is used to configure group addresses in addition to those defined in the SSM standard." ::= { vRtrPimNgProtocolObjs 19 } vRtrPimNgSSMGroupEntry OBJECT-TYPE SYNTAX VRtrPimNgSSMGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgSSMGroupEntry defines a group range to be used for SSM." INDEX { vRtrID, vRtrPimNgSSMGroupAddressType, vRtrPimNgSSMGroupAddress, vRtrPimNgSSMGroupMask } ::= { vRtrPimNgSSMGroupTable 1 } VRtrPimNgSSMGroupEntry ::= SEQUENCE { vRtrPimNgSSMGroupAddressType InetAddressType, vRtrPimNgSSMGroupAddress InetAddress, vRtrPimNgSSMGroupMask InetAddressPrefixLength, vRtrPimNgSSMGroupRowStatus RowStatus, vRtrPimNgSSMGroupRowLastChanged TimeStamp } vRtrPimNgSSMGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupAddressType indicates the type of address specified by vRtrPimNgSSMGroupAddress." ::= { vRtrPimNgSSMGroupEntry 1 } vRtrPimNgSSMGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupAddress combined with the value of vRtrPimNgSSMGroupMask indicates the range of multicast group addresses to be used for Source Specific Multicast(SSM)." ::= { vRtrPimNgSSMGroupEntry 2 } vRtrPimNgSSMGroupMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupMask indicates the mask which is combined with vRtrPimNgSSMGroupAddress to get the range of multicast group addresses to be used for Source Specific Multicast(SSM)." ::= { vRtrPimNgSSMGroupEntry 3 } vRtrPimNgSSMGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupRowStatus is used to create or delete an entry." ::= { vRtrPimNgSSMGroupEntry 4 } vRtrPimNgSSMGroupRowLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgSSMGroupRowLastChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgSSMGroupEntry 5 } vRtrPimNgAnycastRPTableLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgAnycastRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 20 } vRtrPimNgAnycastRPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgAnycastRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgAnycastRPTable contains a list of configured anycast Rendezvous Point (RP) addresses." ::= { vRtrPimNgProtocolObjs 21 } vRtrPimNgAnycastRPEntry OBJECT-TYPE SYNTAX VRtrPimNgAnycastRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgAnycastRPTable represents a configured anycast Rendezvous Point(RP). An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgAnycastRPRowStatus." INDEX { vRtrID, vRtrPimNgAnycastRPAddressType, vRtrPimNgAnycastRPAddress, vRtrPimNgAnycastRPPeerAddrType, vRtrPimNgAnycastRPPeerAddress } ::= { vRtrPimNgAnycastRPTable 1 } VRtrPimNgAnycastRPEntry ::= SEQUENCE { vRtrPimNgAnycastRPAddressType InetAddressType, vRtrPimNgAnycastRPAddress InetAddress, vRtrPimNgAnycastRPPeerAddrType InetAddressType, vRtrPimNgAnycastRPPeerAddress InetAddress, vRtrPimNgAnycastRPRowStatus RowStatus, vRtrPimNgAnycastRPRowLstChanged TimeStamp } vRtrPimNgAnycastRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPAddressType indicates the address type of vRtrPimNgAnycastRPAddress address." ::= { vRtrPimNgAnycastRPEntry 1 } vRtrPimNgAnycastRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPAddress indicates the Rendezvous Point (RP) anycast address that should be used by the router for the range of multicast groups." ::= { vRtrPimNgAnycastRPEntry 2 } vRtrPimNgAnycastRPPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPPeerAddrType indicates the address type of vRtrPimNgAnycastRPPeerAddress address." ::= { vRtrPimNgAnycastRPEntry 3 } vRtrPimNgAnycastRPPeerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPPeerAddress indicates the Peer's Rendezvous Point (RP) anycast address that should be used by the router for the range of multicast groups." ::= { vRtrPimNgAnycastRPEntry 4 } vRtrPimNgAnycastRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPRowStatus is used to create or destroy entries in this table." ::= { vRtrPimNgAnycastRPEntry 5 } vRtrPimNgAnycastRPRowLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAnycastRPRowLstChanged indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgAnycastRPEntry 6 } vRtrPimNgSptSwOvrThdTabLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgSptSwOvrThdTabLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgSptSwitchoverThdTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 22 } vRtrPimNgSptSwitchoverThdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgSptSwitchoverThdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgSptSwitchoverThdTable configures shortest path tree(spt tree) switchover thresholds for group prefixes. PIM-SM routers with directly connected routers receive multicast traffic initially on a shared tree rooted at the Rendezvous Point (RP). Once the traffic arrives on the shared tree and the source of the traffic is known, a switchover to the spt tree rooted at the source is attempted. For a group that falls in the range of a prefix configured in the table, the corresponding threshold value determines when the router should switch over from the shared tree to the source specific tree. The switchover is attempted only if the traffic rate on the shared tree for the group exceeds the configured threshold. In the absence of any matching prefix in the table, the default behavior is to switchover when the first packet is seen. In the presence of multiple prefixes matching a given group, the most specific entry is used." ::= { vRtrPimNgProtocolObjs 23 } vRtrPimNgSptSwitchoverThdEntry OBJECT-TYPE SYNTAX VRtrPimNgSptSwitchoverThdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgSptSwitchoverThdEntry represents a group prefix and the corresponding shortest path tree (spt tree) switchover threshold it has to use. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgSptSwovrThdRowStatus. The SET request must specify the group prefix as well as the threshold, or else the entry will not be created." INDEX { vRtrID, vRtrPimNgSptSwOvrThdTblGpAdType, vRtrPimNgSptSwOvrThdTblGrpAddr, vRtrPimNgSptSwOvrThdTblGpAdMask } ::= { vRtrPimNgSptSwitchoverThdTable 1 } VRtrPimNgSptSwitchoverThdEntry ::= SEQUENCE { vRtrPimNgSptSwOvrThdTblGpAdType InetAddressType, vRtrPimNgSptSwOvrThdTblGrpAddr InetAddress, vRtrPimNgSptSwOvrThdTblGpAdMask InetAddressPrefixLength, vRtrPimNgSptSwovrThdRowStatus RowStatus, vRtrPimNgSptSwovrThdRowLstChngd TimeStamp, vRtrPimNgSptSwitchoverThd Unsigned32 } vRtrPimNgSptSwOvrThdTblGpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSptSwOvrThdTblGpAdType indicates the address type of vRtrPimNgSptSwOvrThdTblGrpAddr address." ::= { vRtrPimNgSptSwitchoverThdEntry 1 } vRtrPimNgSptSwOvrThdTblGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSptSwOvrThdTblGrpAddr indicates the group address for which the threshold can be configured." ::= { vRtrPimNgSptSwitchoverThdEntry 2 } vRtrPimNgSptSwOvrThdTblGpAdMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgSptSwOvrThdTblGpAdMask indicates the mask for the group address vRtrPimNgSptSwOvrThdTblGrpAddr." ::= { vRtrPimNgSptSwitchoverThdEntry 3 } vRtrPimNgSptSwovrThdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgSptSwovrThdRowStatus is used to create or destroy entries in this table. A row creation attempt will fail if vRtrPimNgSptSwitchoverThd is not explicitly set to a value." ::= { vRtrPimNgSptSwitchoverThdEntry 4 } vRtrPimNgSptSwovrThdRowLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgSptSwovrThdRowLstChngd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgSptSwitchoverThdEntry 5 } vRtrPimNgSptSwitchoverThd OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgSptSwitchoverThd specifies the configured threshold in kilobits per second(kbps) for a group prefix. A switchover is attempted only if the traffic rate on the shared tree for the group exceeds this configured threshold. The value of 4294967295 indicates that there will be no switchover from RPT to SPT and traffic will continue through RPT. This value means 'infinity'. When there is no row in this table, switchover from RPT to SPT is done on the first packet. A row creation attempt will fail if this object is not explicitly set to a value." ::= { vRtrPimNgSptSwitchoverThdEntry 6 } vRtrPimNgDataMtThdTableLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgDataMtThdTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 24 } vRtrPimNgDataMtThdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgDataMtThdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgDataMtThdTable configures Multicast Data Tunnel(Data MT) thresholds for group prefixes. Whenever the threshold of a C-(S,G)'s exceeds the configured threshold value specified by vRtrPimNgDataMtThd in this table, a MT interface is created in vRtrPimNgDataMtTable. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the MT interface is automatically deleted." ::= { vRtrPimNgProtocolObjs 25 } vRtrPimNgDataMtThdEntry OBJECT-TYPE SYNTAX VRtrPimNgDataMtThdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgDataMtThdEntry represents a group prefix and the corresponding Data MT threshold it has to use. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgDataMtThdRowStatus. The SET request must specify the group prefix as well as the threshold, or else the entry will not be created." INDEX { vRtrID, vRtrPimNgDataMtThdTblGrpAdrType, vRtrPimNgDataMtThdTblGrpAddr, vRtrPimNgDataMtThdTblGrpAdrMask } ::= { vRtrPimNgDataMtThdTable 1 } VRtrPimNgDataMtThdEntry ::= SEQUENCE { vRtrPimNgDataMtThdTblGrpAdrType InetAddressType, vRtrPimNgDataMtThdTblGrpAddr InetAddress, vRtrPimNgDataMtThdTblGrpAdrMask InetAddressPrefixLength, vRtrPimNgDataMtThdRowStatus RowStatus, vRtrPimNgDataMtThdRowLstChngd TimeStamp, vRtrPimNgDataMtThd Unsigned32, vRtrPimNgDataMtSpmsiAddRxThd Unsigned32, vRtrPimNgDataMtSpmsiDelRxThd Unsigned32 } vRtrPimNgDataMtThdTblGrpAdrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdTblGrpAdrType indicates the address type of vRtrPimNgDataMtThdTblGrpAddr address." ::= { vRtrPimNgDataMtThdEntry 1 } vRtrPimNgDataMtThdTblGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdTblGrpAddr indicates the group address for which the threshold can be configured." ::= { vRtrPimNgDataMtThdEntry 2 } vRtrPimNgDataMtThdTblGrpAdrMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdTblGrpAdrMask indicates the mask for the group address vRtrPimNgSptSwOvrThdTblGrpAddr." ::= { vRtrPimNgDataMtThdEntry 3 } vRtrPimNgDataMtThdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdRowStatus is used to create or destroy entries in this table. A row creation attempt will fail if vRtrPimNgDataMtThd is not explicitly set to a value." ::= { vRtrPimNgDataMtThdEntry 4 } vRtrPimNgDataMtThdRowLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThdRowLstChngd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgDataMtThdEntry 5 } vRtrPimNgDataMtThd OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtThd specifies the configured threshold in kilo bits per second(bps) for a group prefix. A MT interface is created only if the traffic rate on the C-(S,G)'s for the group exceeds this configured threshold. A row creation attempt will fail if this object is not explicitly set to a value." ::= { vRtrPimNgDataMtThdEntry 6 } vRtrPimNgDataMtSpmsiAddRxThd OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtSpmsiAddRxThd specifies the number of receiver PEs for creating a S-PMSI. S-PMSI is created when the bandwidth threshold value specified by vRtrPimNgDataMtThd is reached and the number of receiver PEs drops below the value specified by vRtrPimNgDataMtSpmsiAddRxThd , once it has crossed vRtrPimNgDataMtSpmsiDelRxThd." DEFVAL { 65535 } ::= { vRtrPimNgDataMtThdEntry 7 } vRtrPimNgDataMtSpmsiDelRxThd OBJECT-TYPE SYNTAX Unsigned32 (2..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtSpmsiDelRxThd specifies the number of receiver PEs for deleting a S-PMSI. When the number of receiver PEs goes above the value specified by vRtrPimNgDataMtSpmsiDelRxThd, S-PMSI is deleted and the multicast group is moved to I-PMSI. It is recommended that vRtrPimNgDataMtSpmsiDelRxThd to be significantly higher than vRtrPimNgDataMtSpmsiAddRxThd to avoid creating and deleting S-PMSI as the receiver PE count fluctuates." DEFVAL { 65535 } ::= { vRtrPimNgDataMtThdEntry 8 } vRtrPimNgIfMcacLevelTblLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLevelTblLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfMcacLevelTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 26 } vRtrPimNgIfMcacLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfMcacLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPimNgIfMcacLevelTable has an entry for each multicast CAC policy constraint level configured on this system." ::= { vRtrPimNgProtocolObjs 27 } vRtrPimNgIfMcacLevelEntry OBJECT-TYPE SYNTAX VRtrPimNgIfMcacLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multicast CAC policy level constraints. Entries are created/deleted by the user." INDEX { vRtrID, vRtrIfIndex, tmnxMcacLevelId } ::= { vRtrPimNgIfMcacLevelTable 1 } VRtrPimNgIfMcacLevelEntry ::= SEQUENCE { vRtrPimNgIfMcacLevelRowStatus RowStatus, vRtrPimNgIfMcacLvlRowLstChngd TimeStamp, vRtrPimNgIfMcacLevelBW Unsigned32 } vRtrPimNgIfMcacLevelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLevelRowStatus is used for creation/deletion of level constraint in a CAC policy." ::= { vRtrPimNgIfMcacLevelEntry 1 } vRtrPimNgIfMcacLvlRowLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLvlRowLstChngd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgIfMcacLevelEntry 2 } vRtrPimNgIfMcacLevelBW OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLevelBW specifies the bandwidth in kilobits per second(kbps) for the level." DEFVAL { 1 } ::= { vRtrPimNgIfMcacLevelEntry 3 } vRtrPimNgIfMcacLagTableLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLagTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfMcacLagTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 28 } vRtrPimNgIfMcacLagTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfMcacLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPimNgIfMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle on this system." ::= { vRtrPimNgProtocolObjs 29 } vRtrPimNgIfMcacLagEntry OBJECT-TYPE SYNTAX VRtrPimNgIfMcacLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multicast CAC lag port constraints. Entries are created/deleted by the user." INDEX { vRtrID, vRtrIfIndex, tmnxMcacLagPortsDown } ::= { vRtrPimNgIfMcacLagTable 1 } VRtrPimNgIfMcacLagEntry ::= SEQUENCE { vRtrPimNgIfMcacLagRowStatus RowStatus, vRtrPimNgIfMcacLagRowLstChngd TimeStamp, vRtrPimNgIfMcacLagLevel Unsigned32 } vRtrPimNgIfMcacLagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLagRowStatus is used for creation/deletion of lag constraint in a CAC policy." ::= { vRtrPimNgIfMcacLagEntry 1 } vRtrPimNgIfMcacLagRowLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLagRowLstChngd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgIfMcacLagEntry 2 } vRtrPimNgIfMcacLagLevel OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacLagLevel specifies the level id to use when the value of tmnxMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of vRtrPimNgIfMcacLagLevel as an index, the operational interface unconstrained bandwidth will be set to vRtrPimNgIfMcacLevelBW. By default for all lag constraints the interface level will be set to 1 at row creation." DEFVAL { 1 } ::= { vRtrPimNgIfMcacLagEntry 3 } vRtrPimNgERPGrpPrfxTblLstChnged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgERPGrpPrfxTblLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgERPGrpPrefixTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 30 } vRtrPimNgERPGrpPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgERPGrpPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgERPGrpPrefixTable lists the group ranges for embedded RP address information. RP address information can only be embedded in the IPv6 multicast group addresses. Multicast groups in the default group range (FF70::/12 to FFF0::/12) are always checked for embedded RP address information." ::= { vRtrPimNgProtocolObjs 31 } vRtrPimNgERPGrpPrefixEntry OBJECT-TYPE SYNTAX VRtrPimNgERPGrpPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgERPGrpPrefixTable. Each entry represents the group range for embedded RP address information." INDEX { vRtrID, vRtrPimNgERPGrpPrfixGrpAddrType, vRtrPimNgERPGrpPrefixGrpAddr, vRtrPimNgERPGrpPrefixGrpMask } ::= { vRtrPimNgERPGrpPrefixTable 1 } VRtrPimNgERPGrpPrefixEntry ::= SEQUENCE { vRtrPimNgERPGrpPrfixGrpAddrType InetAddressType, vRtrPimNgERPGrpPrefixGrpAddr InetAddress, vRtrPimNgERPGrpPrefixGrpMask InetAddressPrefixLength, vRtrPimNgERPGrpPrefixRowStatus RowStatus } vRtrPimNgERPGrpPrfixGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgERPGrpPrfixGrpAddrType indicates the type of address represented by vRtrPimNgERPGrpPrefixGrpAddr." ::= { vRtrPimNgERPGrpPrefixEntry 1 } vRtrPimNgERPGrpPrefixGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgERPGrpPrefixGrpAddr combined with the value of vRtrPimNgERPGrpPrefixGrpMask indicates the range of multicast group addresses for which RP address information can be embedded." ::= { vRtrPimNgERPGrpPrefixEntry 2 } vRtrPimNgERPGrpPrefixGrpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgERPGrpPrefixGrpMask indicates the mask which is combined with the value of vRtrPimNgERPGrpPrefixGrpAddr to get the range of multicast group addresses for which RP address information can be embedded." ::= { vRtrPimNgERPGrpPrefixEntry 3 } vRtrPimNgERPGrpPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgERPGrpPrefixRowStatus is used to create or destroy entries in this table." ::= { vRtrPimNgERPGrpPrefixEntry 4 } vRtrPimNgRsvpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the interfaces on which PIM protocol operation is enabled." ::= { vRtrPimNgProtocolObjs 32 } vRtrPimNgRsvpIfEntry OBJECT-TYPE SYNTAX VRtrPimNgRsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgRsvpIfTable represents a tunnel interface on this router that participates in the PIM protocol. Entries can be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrPimNgRsvpIfLspName, vRtrPimNgRsvpIfSenderAddrType, vRtrPimNgRsvpIfSenderAddr } ::= { vRtrPimNgRsvpIfTable 1 } VRtrPimNgRsvpIfEntry ::= SEQUENCE { vRtrPimNgRsvpIfLspName TNamedItem, vRtrPimNgRsvpIfSenderAddrType InetAddressType, vRtrPimNgRsvpIfSenderAddr InetAddress, vRtrPimNgRsvpIfRowStatus RowStatus, vRtrPimNgRsvpIfOperState TmnxOperState, vRtrPimNgRsvpIfIndex InterfaceIndex } vRtrPimNgRsvpIfLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIfLspName indicates the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface." ::= { vRtrPimNgRsvpIfEntry 1 } vRtrPimNgRsvpIfSenderAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIfSenderAddrType indicates the type for vRtrPimNgRsvpIfSenderAddr." ::= { vRtrPimNgRsvpIfEntry 2 } vRtrPimNgRsvpIfSenderAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIfSenderAddr indicates the sender address." ::= { vRtrPimNgRsvpIfEntry 3 } vRtrPimNgRsvpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIfRowStatus is used to create or delete an entry." ::= { vRtrPimNgRsvpIfEntry 4 } vRtrPimNgRsvpIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIfOperState indicates the current operational state of PIM protocol on this interface." ::= { vRtrPimNgRsvpIfEntry 5 } vRtrPimNgRsvpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The unique value of vRtrPimNgRsvpIfIndex identifies this tunnel interface for this virtual router in the Nokia SROS system. It is a unique value among entries with the same value of vRtrID." ::= { vRtrPimNgRsvpIfEntry 6 } vRtrPimNgCRPGpPfxInetTblLstChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgCRPGpPfxInetTblLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgCRPGrpPrefixInetTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgProtocolObjs 33 } vRtrPimNgCRPGrpPrefixInetTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgCRPGrpPrefixInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgCRPGrpPrefixInetTable lists the group prefixes for which the router sends the Candidate RP Advertisement." ::= { vRtrPimNgProtocolObjs 34 } vRtrPimNgCRPGrpPrefixInetEntry OBJECT-TYPE SYNTAX VRtrPimNgCRPGrpPrefixInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgCRPGrpPrefixInetTable. Each entry represents the group prefix for which the router sends the Candidate RP Advertisement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR router(E-BSR)." INDEX { vRtrID, vRtrPimNgCRPGrpPfxInetGrpAdrType, vRtrPimNgCRPGrpPrefixInetGrpAddr, vRtrPimNgCRPGrpPrefixInetGrpMask } ::= { vRtrPimNgCRPGrpPrefixInetTable 1 } VRtrPimNgCRPGrpPrefixInetEntry ::= SEQUENCE { vRtrPimNgCRPGrpPfxInetGrpAdrType InetAddressType, vRtrPimNgCRPGrpPrefixInetGrpAddr InetAddress, vRtrPimNgCRPGrpPrefixInetGrpMask InetAddressPrefixLength, vRtrPimNgCRPGrpPrfxInetRowStatus RowStatus, vRtrPimNgCRPGrpPfxInetRowLstChgd TimeStamp } vRtrPimNgCRPGrpPfxInetGrpAdrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPGrpPfxInetGrpAdrType indicates the type of address represented by vRtrPimNgCRPGrpPrefixInetGrpAddr.The value 'unknown (0)' is not valid for this index object." ::= { vRtrPimNgCRPGrpPrefixInetEntry 1 } vRtrPimNgCRPGrpPrefixInetGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPGrpPrefixInetGrpAddr combined with the value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the range of multicast group addresses for which the router advertises to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address." ::= { vRtrPimNgCRPGrpPrefixInetEntry 2 } vRtrPimNgCRPGrpPrefixInetGrpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the mask which is combined with the value of vRtrPimNgCRPGrpPrefixInetGrpAddr to get the range of multicast group addresses for which the router advertises to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address." ::= { vRtrPimNgCRPGrpPrefixInetEntry 3 } vRtrPimNgCRPGrpPrfxInetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgCRPGrpPrfxInetRowStatus specifies the row status of the group prefix entry for the Candidate RP Advertisement. Row status is used for creation and deletion of vRtrPimNgCRPGrpPrefixInetTable entries." ::= { vRtrPimNgCRPGrpPrefixInetEntry 4 } vRtrPimNgCRPGrpPfxInetRowLstChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgCRPGrpPfxInetRowLstChgd indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgCRPGrpPrefixInetEntry 5 } vRtrPimNgCRPInetTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgCRPInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgCRPInetTable lists the C-RPs and the group prefixes sent in the C-RP advertisement. vRtrPimNgCRPInetTable will be empty on all routers except the elected BSR router." ::= { vRtrPimNgProtocolObjs 35 } vRtrPimNgCRPInetEntry OBJECT-TYPE SYNTAX VRtrPimNgCRPInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgCRPInetTable. It is created when the Elected BSR receives a Candidate-RP Advertisement from the C-RPs." INDEX { vRtrID, vRtrPimNgCRPInetAddressType, vRtrPimNgCRPInetAddress, vRtrPimNgCRPInetGrpAddrType, vRtrPimNgCRPInetGrpAddr, vRtrPimNgCRPInetGrpMask } ::= { vRtrPimNgCRPInetTable 1 } VRtrPimNgCRPInetEntry ::= SEQUENCE { vRtrPimNgCRPInetAddressType InetAddressType, vRtrPimNgCRPInetAddress InetAddress, vRtrPimNgCRPInetGrpAddrType InetAddressType, vRtrPimNgCRPInetGrpAddr InetAddress, vRtrPimNgCRPInetGrpMask InetAddressPrefixLength, vRtrPimNgCRPInetHoldtime Integer32, vRtrPimNgCRPInetPriority Integer32, vRtrPimNgCRPInetExpiryTime Integer32 } vRtrPimNgCRPInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetAddressType indicates the type of address of the Candidate RP." ::= { vRtrPimNgCRPInetEntry 1 } vRtrPimNgCRPInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetAddress indicates the Candidate RP address." ::= { vRtrPimNgCRPInetEntry 2 } vRtrPimNgCRPInetGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetGrpAddrType indicates the type of the address represented by vRtrPimNgCRPInetGrpAddr." ::= { vRtrPimNgCRPInetEntry 3 } vRtrPimNgCRPInetGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetGrpAddr combined with the value of vRtrPimNgCRPInetGrpMask indicates the range of multicast group addresses for which vRtrPimNgCRPInetAddress is the Candidate RP." ::= { vRtrPimNgCRPInetEntry 4 } vRtrPimNgCRPInetGrpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetGrpMask indicates the mask which is combined with vRtrPimNgCRPInetGrpAddr to get the range of multicast group addresses for which vRtrPimNgCRPInetAddress is the Candidate RP." ::= { vRtrPimNgCRPInetEntry 5 } vRtrPimNgCRPInetHoldtime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period." ::= { vRtrPimNgCRPInetEntry 6 } vRtrPimNgCRPInetPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority." ::= { vRtrPimNgCRPInetEntry 7 } vRtrPimNgCRPInetExpiryTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgCRPInetExpiryTime indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0." ::= { vRtrPimNgCRPInetEntry 8 } vRtrPimNgRPSetInetTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRPSetInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the RP Set sent by the Elected BSR in the Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in case of Auto-RP. It also contains the static entries in vRtrPimNgStGrptoRPTable. The router uses this table to calculate the group-to-RP mappings." ::= { vRtrPimNgProtocolObjs 36 } vRtrPimNgRPSetInetEntry OBJECT-TYPE SYNTAX VRtrPimNgRPSetInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgRPSetInetTable. It is created by the elected BSR when it receives the Candidate-RP-Adv messages. Other routers create this entry on receiving Bootstrap Message(BSM) sent by the elected BSR router. It can also be created when a router receives a Mapping message from the Auto-RP Mapping Agent." INDEX { vRtrID, vRtrPimNgRPSetInetType, vRtrPimNgRPSetInetGrpAddrType, vRtrPimNgRPSetInetGrpAddr, vRtrPimNgRPSetInetGrpMask, vRtrPimNgRPSetInetCRPAddrType, vRtrPimNgRPSetInetCRPAddress } ::= { vRtrPimNgRPSetInetTable 1 } VRtrPimNgRPSetInetEntry ::= SEQUENCE { vRtrPimNgRPSetInetType INTEGER, vRtrPimNgRPSetInetGrpAddrType InetAddressType, vRtrPimNgRPSetInetGrpAddr InetAddress, vRtrPimNgRPSetInetGrpMask InetAddressPrefixLength, vRtrPimNgRPSetInetCRPAddrType InetAddressType, vRtrPimNgRPSetInetCRPAddress InetAddress, vRtrPimNgRPSetInetHoldtime Integer32, vRtrPimNgRPSetInetPriority Integer32, vRtrPimNgRPSetInetExpiryTime Unsigned32 } vRtrPimNgRPSetInetType OBJECT-TYPE SYNTAX INTEGER { dynamic (1), static (2), auto-rp (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrPimNgRPSetInetType is an index into this table. It indicates whether the entry was learned through the bootstrap mechanism, the Auto-RP mechanism or if it was statically configured using the vRtrPimNgStGrptoRPTable." ::= { vRtrPimNgRPSetInetEntry 1 } vRtrPimNgRPSetInetGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetGrpAddrType indicates the type of address represented by vRtrPimNgRPSetInetGrpAddr." ::= { vRtrPimNgRPSetInetEntry 2 } vRtrPimNgRPSetInetGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetGrpAddr, combined with the value of vRtrPimNgRPSetInetGrpMask, indicates the range of multicast group addresses for which vRtrPimNgRPSetInetCRPAddress is the Candidate RP." ::= { vRtrPimNgRPSetInetEntry 3 } vRtrPimNgRPSetInetGrpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetGrpMask indicates the mask which is combined with vRtrPimNgRPSetInetGrpAddr to get the range of multicast group addresses for which vRtrPimNgRPSetInetCRPAddress is the candidate RP." ::= { vRtrPimNgRPSetInetEntry 4 } vRtrPimNgRPSetInetCRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetCRPAddrType indicates the type of address of the Candidate RP address." ::= { vRtrPimNgRPSetInetEntry 5 } vRtrPimNgRPSetInetCRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetCRPAddress indicates the Candidate RP address." ::= { vRtrPimNgRPSetInetEntry 6 } vRtrPimNgRPSetInetHoldtime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period. The value of vRtrPimNgRPSetInetHoldtime will be zero for static entries." ::= { vRtrPimNgRPSetInetEntry 7 } vRtrPimNgRPSetInetPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority. For static entries, the priority is always 1." ::= { vRtrPimNgRPSetInetEntry 8 } vRtrPimNgRPSetInetExpiryTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRPSetInetExpiryTime indicates the minimum time remaining before the RP Set group prefix will be declared down." ::= { vRtrPimNgRPSetInetEntry 9 } vRtrPimNgGrpSrcHostTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGrpSrcHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the PIM enabled hosts for an entry in vRtrPimNgGrpSrcTable." ::= { vRtrPimNgProtocolObjs 37 } vRtrPimNgGrpSrcHostEntry OBJECT-TYPE SYNTAX VRtrPimNgGrpSrcHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGrpSrcHostTable. Each entry represents the state of the PIM enabled host for every vRtrPimNgGrpSrcEntry." INDEX { vRtrID, vRtrPimNgGrpSrcGrpAddrType, vRtrPimNgGrpSrcGroupAddress, vRtrPimNgGrpSrcSrcAddrType, vRtrPimNgGrpSrcSourceAddress, vRtrPimNgGrpSrcHostAddrType, vRtrPimNgGrpSrcHostAddress } ::= { vRtrPimNgGrpSrcHostTable 1 } VRtrPimNgGrpSrcHostEntry ::= SEQUENCE { vRtrPimNgGrpSrcHostAddrType InetAddressType, vRtrPimNgGrpSrcHostAddress InetAddress, vRtrPimNgGrpSrcHostFlags BITS } vRtrPimNgGrpSrcHostAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcHostAddrType indicates the type of IP multicast host address represented by vRtrPimNgGrpSrcHostAddress." ::= { vRtrPimNgGrpSrcHostEntry 1 } vRtrPimNgGrpSrcHostAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcHostAddress indicates the IP multicast host address for which this entry contains information. If the vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be zero and vRtrPimNgGrpSrcHostAddress will contain the address of the RP." ::= { vRtrPimNgGrpSrcHostEntry 2 } vRtrPimNgGrpSrcHostFlags OBJECT-TYPE SYNTAX BITS { immediateOifList (0), inheritedOifList (1), inheritedRptOifList (2), localRxInclude (3), localRxExclude (4), joinPruneList (5), lostAssertList (6), sgRptPruneOifList (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcHostFlags indicates the different lists that this host belongs to." ::= { vRtrPimNgGrpSrcHostEntry 3 } vRtrPimNgGrpSrcGrpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgGrpSrcGrpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the PIM enabled group-interfaces for an entry in vRtrPimNgGrpSrcTable." ::= { vRtrPimNgProtocolObjs 38 } vRtrPimNgGrpSrcGrpIfEntry OBJECT-TYPE SYNTAX VRtrPimNgGrpSrcGrpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgGrpSrcGrpIfTable. Each entry represents the state of the PIM enabled group-interfaces for every vRtrPimNgGrpSrcEntry." INDEX { vRtrID, vRtrPimNgGrpSrcGrpAddrType, vRtrPimNgGrpSrcGroupAddress, vRtrPimNgGrpSrcSrcAddrType, vRtrPimNgGrpSrcSourceAddress, vRtrPimNgGrpSrcGrpIfFwdSvcId, vRtrPimNgGrpSrcGrpIfIndex, sapPortId, sapEncapValue } ::= { vRtrPimNgGrpSrcGrpIfTable 1 } VRtrPimNgGrpSrcGrpIfEntry ::= SEQUENCE { vRtrPimNgGrpSrcGrpIfFwdSvcId TmnxServId, vRtrPimNgGrpSrcGrpIfIndex InterfaceIndex, vRtrPimNgGrpSrcGrpIfFlags BITS } vRtrPimNgGrpSrcGrpIfFwdSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpIfFwdSvcId specifies the forwarding service ID for a group-interface in a retailer context." DEFVAL { 0 } ::= { vRtrPimNgGrpSrcGrpIfEntry 1 } vRtrPimNgGrpSrcGrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique value which identifies this group-interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrPimNgGrpSrcGrpIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrPimNgGrpSrcGrpIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next." ::= { vRtrPimNgGrpSrcGrpIfEntry 2 } vRtrPimNgGrpSrcGrpIfFlags OBJECT-TYPE SYNTAX BITS { immediateOifList (0), inheritedOifList (1), inheritedRptOifList (2), localRxInclude (3), localRxExclude (4), joinPruneList (5), lostAssertList (6), sgRptPruneOifList (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgGrpSrcGrpIfFlags indicates the different lists that this group-interface belongs to." ::= { vRtrPimNgGrpSrcGrpIfEntry 3 } vRtrPimNgMvpnUMHPETblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgMvpnUMHPETblLastChg indicates the time of the last change to any row of vRtrPimNgMvpnUMHPETable." ::= { vRtrPimNgProtocolObjs 39 } vRtrPimNgMvpnUMHPETable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgMvpnUMHPEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the mapping between primary and standby peers to support MVPN source redundancy." ::= { vRtrPimNgProtocolObjs 40 } vRtrPimNgMvpnUMHPEEntry OBJECT-TYPE SYNTAX VRtrPimNgMvpnUMHPEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgMvpnUMHPETable. Each row represents the standby peer address configured for a primary peer in MVPN." INDEX { vRtrID, vRtrPimNgMvpnUMHPEAddrType, vRtrPimNgMvpnUMHPEAddr } ::= { vRtrPimNgMvpnUMHPETable 1 } VRtrPimNgMvpnUMHPEEntry ::= SEQUENCE { vRtrPimNgMvpnUMHPEAddrType InetAddressType, vRtrPimNgMvpnUMHPEAddr InetAddress, vRtrPimNgMvpnUMHPERowStatus RowStatus, vRtrPimNgMvpnUMHPELastChanged TimeStamp, vRtrPimNgMvpnUMHPEStandbyAdrTyp InetAddressType, vRtrPimNgMvpnUMHPEStandbyAddr InetAddress } vRtrPimNgMvpnUMHPEAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPEAddrType indicates the type of the address assigned to a primary PE indicated by vRtrPimNgMvpnUMHPEAddr." ::= { vRtrPimNgMvpnUMHPEEntry 1 } vRtrPimNgMvpnUMHPEAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPEAddr indicates the value of the address assigned to the primary PE to be used in UMH selection for MVPN source redundancy." ::= { vRtrPimNgMvpnUMHPEEntry 2 } vRtrPimNgMvpnUMHPERowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPERowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrPimNgMvpnUMHPEEntry 3 } vRtrPimNgMvpnUMHPELastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPELastChanged indicates the timestamp of the last change to this row in vRtrPimNgMvpnUMHPETable." ::= { vRtrPimNgMvpnUMHPEEntry 4 } vRtrPimNgMvpnUMHPEStandbyAdrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPEStandbyAdrTyp specifies the type of the address assigned to the standby PE indicated by vRtrPimNgMvpnUMHPEStandbyAddr. This object MUST be specified at row creation time." DEFVAL { unknown } ::= { vRtrPimNgMvpnUMHPEEntry 5 } vRtrPimNgMvpnUMHPEStandbyAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgMvpnUMHPEStandbyAddr specifies the value of the address assigned to a standby PE to be used in UMH selection for MVPN source redundancy. This value cannot be modified without shutting down the MVPN instance. An address instance of 'vRtrPimNgMvpnUMHPEStandbyAddr' can be associated with only a single address instance of 'vRtrPimNgMvpnUMHPEAddr' or in other words the pairing must be unique. This object MUST be specified at row creation time." DEFVAL { ''H } ::= { vRtrPimNgMvpnUMHPEEntry 6 } vRtrPimNgMvpnSrcPrefixTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixTblLstChg indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgMvpnSrcPrefixTable." ::= { vRtrPimNgProtocolObjs 41 } vRtrPimNgMvpnSrcPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgMvpnSrcPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the source prefixes and related information." ::= { vRtrPimNgProtocolObjs 42 } vRtrPimNgMvpnSrcPrefixEntry OBJECT-TYPE SYNTAX VRtrPimNgMvpnSrcPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry in the vRtrPimNgMvpnSrcPrefixTable. Each entry represents a source prefix." INDEX { vRtrID, vRtrPimNgMvpnSrcPrefixType, vRtrPimNgMvpnSrcPrefixAddr, vRtrPimNgMvpnSrcPrefixLen } ::= { vRtrPimNgMvpnSrcPrefixTable 1 } VRtrPimNgMvpnSrcPrefixEntry ::= SEQUENCE { vRtrPimNgMvpnSrcPrefixType InetAddressType, vRtrPimNgMvpnSrcPrefixAddr InetAddress, vRtrPimNgMvpnSrcPrefixLen InetAddressPrefixLength, vRtrPimNgMvpnSrcPrefixRowStatus RowStatus, vRtrPimNgMvpnSrcPrefixRowLastChg TimeStamp } vRtrPimNgMvpnSrcPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixType indicates the address type of source prefix address represented by vRtrPimNgMvpnSrcPrefixAddr." ::= { vRtrPimNgMvpnSrcPrefixEntry 1 } vRtrPimNgMvpnSrcPrefixAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixAddr indicates the IP address for which this entry contains information." ::= { vRtrPimNgMvpnSrcPrefixEntry 2 } vRtrPimNgMvpnSrcPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixLen indicates the prefix length for vRtrPimNgMvpnSrcPrefixAddr." ::= { vRtrPimNgMvpnSrcPrefixEntry 3 } vRtrPimNgMvpnSrcPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixRowStatus specifies the row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrPimNgMvpnSrcPrefixEntry 4 } vRtrPimNgMvpnSrcPrefixRowLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgMvpnSrcPrefixRowLastChg indicates the timestamp of the last change to this row in vRtrPimNgMvpnSrcPrefixTable." ::= { vRtrPimNgMvpnSrcPrefixEntry 5 } vRtrPimNgExtranetCDTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDTblLstChg indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgExtranetCDTable." ::= { vRtrPimNgProtocolObjs 43 } vRtrPimNgExtranetCDTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgExtranetCDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the group prefix and related information for PIM core diversity." ::= { vRtrPimNgProtocolObjs 44 } vRtrPimNgExtranetCDEntry OBJECT-TYPE SYNTAX VRtrPimNgExtranetCDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry in the vRtrPimNgExtranetCDTable. Each entry represents a group prefix for PIM core diversity." INDEX { vRtrID, vRtrPimNgExtranetCDGrpPfxType, vRtrPimNgExtranetCDGrpPfxAddr, vRtrPimNgExtranetCDGrpPfxLen } ::= { vRtrPimNgExtranetCDTable 1 } VRtrPimNgExtranetCDEntry ::= SEQUENCE { vRtrPimNgExtranetCDGrpPfxType InetAddressType, vRtrPimNgExtranetCDGrpPfxAddr InetAddress, vRtrPimNgExtranetCDGrpPfxLen InetAddressPrefixLength, vRtrPimNgExtranetCDMvpnId Unsigned32, vRtrPimNgExtranetCDRowStatus RowStatus, vRtrPimNgExtranetCDRowLstChg TimeStamp, vRtrPimNgExtranetCDStarGFlag TruthValue } vRtrPimNgExtranetCDGrpPfxType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDGrpPfxType indicates the address type of core diversity group prefix address represented by vRtrPimNgExtranetCDGrpPfxAddr." ::= { vRtrPimNgExtranetCDEntry 1 } vRtrPimNgExtranetCDGrpPfxAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDGrpPfxAddr indicates the IP address for which this entry contains information." ::= { vRtrPimNgExtranetCDEntry 2 } vRtrPimNgExtranetCDGrpPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDGrpPfxLen indicates the prefix length for vRtrPimNgExtranetCDGrpPfxAddr." ::= { vRtrPimNgExtranetCDEntry 3 } vRtrPimNgExtranetCDMvpnId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDMvpnId specifies the core diversity MVPN ID." ::= { vRtrPimNgExtranetCDEntry 4 } vRtrPimNgExtranetCDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDRowStatus specifies the row status of this table row. This object is used to create or delete rows in this table. In order for the row creation to succeed, vRtrPimNgExtranetCDMvpnId should be set to an appropriate MVPN ID." ::= { vRtrPimNgExtranetCDEntry 5 } vRtrPimNgExtranetCDRowLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDRowLstChg indicates the timestamp of the last change to this row in vRtrPimNgExtranetCDTable." ::= { vRtrPimNgExtranetCDEntry 6 } vRtrPimNgExtranetCDStarGFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgExtranetCDStarGFlag specifies that the group prefix specified by vRtrPimNgExtranetCDGrpPfxAddr is ready to accept (*,G) traffic." DEFVAL { false } ::= { vRtrPimNgExtranetCDEntry 7 } vRtrPimNgDataMtPlcyTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyTblLstChg indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgDataMtPlcyTable." ::= { vRtrPimNgProtocolObjs 45 } vRtrPimNgDataMtPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgDataMtPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the multistream SPMSIs." ::= { vRtrPimNgProtocolObjs 46 } vRtrPimNgDataMtPlcyEntry OBJECT-TYPE SYNTAX VRtrPimNgDataMtPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry in the vRtrPimNgDataMtPlcyTable. Each entry represents a multistream spmsi." INDEX { vRtrID, vRtrPimNgDataMtPlcyIndex } ::= { vRtrPimNgDataMtPlcyTable 1 } VRtrPimNgDataMtPlcyEntry ::= SEQUENCE { vRtrPimNgDataMtPlcyIndex Unsigned32, vRtrPimNgDataMtPlcyRowStatus RowStatus, vRtrPimNgDataMtPlcyRowLastChg TimeStamp, vRtrPimNgDataMtPlcyLspTemplate TNamedItemOrEmpty, vRtrPimNgDataMtPlcyAdminState TmnxAdminState, vRtrPimNgDataMtPlcyGrpAddrMode INTEGER, vRtrPimNgDataMtPlcyGrpAddrType InetAddressType, vRtrPimNgDataMtPlcyGrpAddr InetAddress, vRtrPimNgDataMtSpmsiStaticPlcy TNamedItemOrEmpty, vRtrPimNgDataMtSpmsiSRPlcy TruthValue } vRtrPimNgDataMtPlcyIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyIndex indicates the index id of the multistream SPMSI." ::= { vRtrPimNgDataMtPlcyEntry 1 } vRtrPimNgDataMtPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyRowStatus specifies the row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrPimNgDataMtPlcyEntry 2 } vRtrPimNgDataMtPlcyRowLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyRowLastChg indicates the timestamp of the last change to this row in vRtrPimNgDataMtPlcyTable." ::= { vRtrPimNgDataMtPlcyEntry 3 } vRtrPimNgDataMtPlcyLspTemplate OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyLspTemplate specifies the LSP template associated with this multi stream SPMSI." DEFVAL { ''H } ::= { vRtrPimNgDataMtPlcyEntry 4 } vRtrPimNgDataMtPlcyAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyAdminState specifies the current administrative state of this multi stream SPMSI." DEFVAL { inService } ::= { vRtrPimNgDataMtPlcyEntry 5 } vRtrPimNgDataMtPlcyGrpAddrMode OBJECT-TYPE SYNTAX INTEGER { none (0), asm (1), ssm (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyGrpAddrMode specifies which PIM mode to use, ASM or SSM, for this multistream SPMSI." DEFVAL { asm } ::= { vRtrPimNgDataMtPlcyEntry 6 } vRtrPimNgDataMtPlcyGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyGrpAddrType indicates the address type of group prefix address represented by vRtrPimNgDataMtPlcyGrpAddr." DEFVAL { unknown } ::= { vRtrPimNgDataMtPlcyEntry 7 } vRtrPimNgDataMtPlcyGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcyGrpAddr indicates the group prefix address associated with this multistream SPMSI." DEFVAL { ''H } ::= { vRtrPimNgDataMtPlcyEntry 8 } vRtrPimNgDataMtSpmsiStaticPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtSpmsiStaticPlcy specifies the pim static policy associated with this multi stream SPMSI." DEFVAL { ''H } ::= { vRtrPimNgDataMtPlcyEntry 9 } vRtrPimNgDataMtSpmsiSRPlcy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtSpmsiSRPlcy specifies the pim p2mp sr policy if associated with this multi stream SPMSI." DEFVAL { false } ::= { vRtrPimNgDataMtPlcyEntry 10 } vRtrPimNgDataMtPlcySGTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGTblLstChg indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgDataMtPlcySGTable." ::= { vRtrPimNgProtocolObjs 47 } vRtrPimNgDataMtPlcySGTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgDataMtPlcySGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the (S,G)'s associated with each multistream SPMSI." ::= { vRtrPimNgProtocolObjs 48 } vRtrPimNgDataMtPlcySGEntry OBJECT-TYPE SYNTAX VRtrPimNgDataMtPlcySGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry in the vRtrPimNgDataMtPlcySGTable. Each entry represents the (S,G) associated with the multistream spmsi." INDEX { vRtrID, vRtrPimNgDataMtPlcyIndex, vRtrPimNgDataMtPlcySGGrpPfxType, vRtrPimNgDataMtPlcySGGrpPfxAddr, vRtrPimNgDataMtPlcySGGrpPfxLen, vRtrPimNgDataMtPlcySGSrcPfxType, vRtrPimNgDataMtPlcySGSrcPfxAddr, vRtrPimNgDataMtPlcySGSrcPfxLen } ::= { vRtrPimNgDataMtPlcySGTable 1 } VRtrPimNgDataMtPlcySGEntry ::= SEQUENCE { vRtrPimNgDataMtPlcySGGrpPfxType InetAddressType, vRtrPimNgDataMtPlcySGGrpPfxAddr InetAddress, vRtrPimNgDataMtPlcySGGrpPfxLen InetAddressPrefixLength, vRtrPimNgDataMtPlcySGSrcPfxType InetAddressType, vRtrPimNgDataMtPlcySGSrcPfxAddr InetAddress, vRtrPimNgDataMtPlcySGSrcPfxLen InetAddressPrefixLength, vRtrPimNgDataMtPlcySGRowStatus RowStatus, vRtrPimNgDataMtPlcySGRowLstChg TimeStamp } vRtrPimNgDataMtPlcySGGrpPfxType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGGrpPfxType indicates the address type of group prefix address represented by vRtrPimNgDataMtPlcySGGrpPfxAddr." ::= { vRtrPimNgDataMtPlcySGEntry 1 } vRtrPimNgDataMtPlcySGGrpPfxAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGGrpPfxAddr indicates the group prefix address associated with this multistream SPMSI." ::= { vRtrPimNgDataMtPlcySGEntry 2 } vRtrPimNgDataMtPlcySGGrpPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGGrpPfxLen indicates the prefix length for vRtrPimNgDataMtPlcySGGrpPfxAddr." ::= { vRtrPimNgDataMtPlcySGEntry 3 } vRtrPimNgDataMtPlcySGSrcPfxType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGSrcPfxType indicates the address type of source prefix address represented by vRtrPimNgDataMtPlcySGSrcPfxAddr." ::= { vRtrPimNgDataMtPlcySGEntry 4 } vRtrPimNgDataMtPlcySGSrcPfxAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGSrcPfxAddr indicates the source prefix address associated with this multistream SPMSI." ::= { vRtrPimNgDataMtPlcySGEntry 5 } vRtrPimNgDataMtPlcySGSrcPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGSrcPfxLen indicates the prefix length for vRtrPimNgDataMtPlcySGSrcPfxAddr." ::= { vRtrPimNgDataMtPlcySGEntry 6 } vRtrPimNgDataMtPlcySGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGRowStatus specifies the row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrPimNgDataMtPlcySGEntry 7 } vRtrPimNgDataMtPlcySGRowLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtPlcySGRowLstChg indicates the timestamp of the last change to this row in vRtrPimNgDataMtPlcySGTable." ::= { vRtrPimNgDataMtPlcySGEntry 8 } vRtrPimNgIfObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 2 } vRtrPimNgIfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgIfObjs 1 } vRtrPimNgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the interfaces on which PIM protocol operation is enabled." ::= { vRtrPimNgIfObjs 2 } vRtrPimNgIfEntry OBJECT-TYPE SYNTAX VRtrPimNgIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgIfTable represents an interface on this router that participates in the PIM protocol. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgIfRowStatus." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrPimNgIfTable 1 } VRtrPimNgIfEntry ::= SEQUENCE { vRtrPimNgIfRowStatus RowStatus, vRtrPimNgIfLastChangeTime TimeStamp, vRtrPimNgIfAdminState TmnxAdminState, vRtrPimNgIfOperState TmnxOperState, vRtrPimNgIfHelloInterval Integer32, vRtrPimNgIfTrackingSupport TruthValue, vRtrPimNgIfMulticastSenders INTEGER, vRtrPimNgIfAutoCreated TruthValue, vRtrPimNgIfBSMCheckRouterAlert TruthValue, vRtrPimNgIfHelloMultiplier Unsigned32, vRtrPimNgIfImprovedAssert TruthValue, vRtrPimNgIfStickyDR TruthValue, vRtrPimNgIfStickyDRPriority Unsigned32, vRtrPimNgIfMaxGroups Unsigned32, vRtrPimNgIfEnableBfd TruthValue, vRtrPimNgIfThreeWayHello INTEGER, vRtrPimNgIfMcacPolicyName TPolicyStatementNameOrEmpty, vRtrPimNgIfMcacUnconstrainedBW Integer32, vRtrPimNgIfMcacConstAdminState TmnxAdminState, vRtrPimNgIfMcacPreRsvdMandBW Integer32, vRtrPimNgIfMcacinUseMandBw Unsigned32, vRtrPimNgIfMcacinUseOpnlBw Unsigned32, vRtrPimNgIfMcacAvailMandBw Unsigned32, vRtrPimNgIfMcacAvailOpnlBw Unsigned32, vRtrPimNgIfMcacValuesInTransit TruthValue, vRtrPimNgIfDRPriority Unsigned32, vRtrPimNgIfAssertPeriod Integer32, vRtrPimNgIfInstantPruneEcho TmnxEnabledDisabled, vRtrPimNgIfIpv6EnableBfd TruthValue, vRtrPimNgIfP2mpLdpTreeJoin TruthValue, vRtrPimNgIfExtranetType INTEGER, vRtrPimNgIfExtranetMvpnId Unsigned32, vRtrPimNgIfMcacUseLagPortWeight TruthValue, vRtrPimNgIfP2mpLdpTreeJoinType BITS, vRtrPimNgIfPmsiType INTEGER, vRtrPimNgIfMcacIfPolicyName TPolicyStatementNameOrEmpty, vRtrPimNgIfBierSignalingType BITS, vRtrPimNgIfBierSigTransportType INTEGER } vRtrPimNgIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfRowStatus is used to create or delete an entry." ::= { vRtrPimNgIfEntry 1 } vRtrPimNgIfLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfLastChangeTime indicates the sysUpTime when this row was last modified." ::= { vRtrPimNgIfEntry 2 } vRtrPimNgIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfAdminState specifies the desired administrative state for PIM protocol on this interface." DEFVAL { inService } ::= { vRtrPimNgIfEntry 3 } vRtrPimNgIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfOperState indicates the current operational state of PIM protocol on this interface." ::= { vRtrPimNgIfEntry 4 } vRtrPimNgIfHelloInterval OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfHelloInterval specifies the frequency at which PIM Hello messages are transmitted on this interface." DEFVAL { 30 } ::= { vRtrPimNgIfEntry 5 } vRtrPimNgIfTrackingSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrPimNgIfTrackingSupport is set to 'true', the T bit in the LAN Prune Delay option of the Hello Message is set. This indicates the router's capability to disable Join message suppression." DEFVAL { false } ::= { vRtrPimNgIfEntry 6 } vRtrPimNgIfMulticastSenders OBJECT-TYPE SYNTAX INTEGER { auto (0), always (1), never (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMulticastSenders specifies the way subnet matching is done for the data packets coming on this interface from the multicast senders. For all interfaces, the default value is 'auto'. It indicates that the subnet match will happen for packets coming in on this interface. If the subnet does not match, the packet will be dropped. If the interface is unnumbered or the host is on a different subnet than that of the interface, vRtrPimNgIfMulticastSenders should be set to 'always'. It means that packets will not go through the regular subnet check and not be dropped on a subnet match. If PIM Hello messages are received on an interface with vRtrPimNgIfMulticastSenders set to 'always', they are dropped and a vRtrPimNgHelloDropped notification is generated. For broadcast interfaces, if it is required that there be no multicast senders, vRtrPimNgIfMulticastSenders should be set to 'never'." DEFVAL { auto } ::= { vRtrPimNgIfEntry 7 } vRtrPimNgIfAutoCreated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfAutoCreated indicates if this interface was auto created using vRtrPimNgGenCreateInterfaces object. If the value of this object is 'true', this interface was auto created. If the value of this object is 'false', this interface was either not created automatically or the default values of the auto created interface were changed." ::= { vRtrPimNgIfEntry 8 } vRtrPimNgIfBSMCheckRouterAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfBSMCheckRouterAlert specifies whether to enable or disable checking of router alert option in the bootstrap messages received on this interface." DEFVAL { false } ::= { vRtrPimNgIfEntry 9 } vRtrPimNgIfHelloMultiplier OBJECT-TYPE SYNTAX Unsigned32 (20..100) UNITS "deci-units" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfHelloMultiplier specifies the multiplier for determining the holdtime for a PIM neighbor on this interface. The hello-multiplier in conjunction with the hello-interval will determine the holdtime for a PIM neighbor. The formula used to calculate the hello-holdtime based on the hello-multiplier is - (hello-interval * hello-multiplier) / 10 The hello-multiplier is specified in multiples of 0.1. This allows the PIMv2 default timeout of 3.5 seconds to be supported." DEFVAL { 35 } ::= { vRtrPimNgIfEntry 10 } vRtrPimNgIfImprovedAssert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfImprovedAssert specifies whether to enable or disable improved assert processing on this interface. The PIM Assert process establishes a forwarder for a LAN and requires interaction between the control and forwarding planes. The Assert process is started when data is received on an outgoing interface. This could impact performance if data is continuously received on an outgoing interface. If this flag is set to 'true', the PIM assert process is done entirely on the control-plane with no interaction between the control and forwarding plane." DEFVAL { true } ::= { vRtrPimNgIfEntry 11 } vRtrPimNgIfStickyDR OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfStickyDR specifies whether to enable or disable sticky-dr operation on this interface. If sticky-dr is turned on, the priority in PIM hellos sent on this interface when elected as DR will be modified to the value configured in vRtrPimNgIfStickyDRPriority. This is done to avoid the delays in forwarding caused by DR recovery, when switching back to the old DR on a LAN when it comes back up. By enabling sticky-dr on this interface, it will continue to act as the DR for the LAN even after the old DR comes back up." DEFVAL { false } ::= { vRtrPimNgIfEntry 12 } vRtrPimNgIfStickyDRPriority OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfStickyDRPriority specifies the DR priority to be sent in PIM Hello messages following the election of that interface as the DR, when sticky-dr operation is enabled. If sticky-dr is turned off, normal PIM behavior is followed and vRtrPimNgIfStickyDRPriority is not applicable." DEFVAL { 1024 } ::= { vRtrPimNgIfEntry 13 } vRtrPimNgIfMaxGroups OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMaxGroups specifies the maximum number of groups for which PIM can have downstream state based on received PIM Joins on this interface. This does not include IGMP local receivers on the interface. When this configuration is changed dynamically to a value lower than the currently accepted number of groups, the groups that are already accepted are not deleted. Only new groups will not be allowed. When this object has a value of 0, there is no limit to the number of groups." DEFVAL { 0 } ::= { vRtrPimNgIfEntry 14 } vRtrPimNgIfEnableBfd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfEnableBfd specifies whether Bi-directional Forwarding Detection is enabled for Ipv4 on this PIM interface. When the value is 'true', this PIM interface can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD for Ipv4." DEFVAL { false } ::= { vRtrPimNgIfEntry 15 } vRtrPimNgIfThreeWayHello OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrPimNgIfThreeWayHello specifies whether to enable or disable the three way hello. For all interfaces, the default value is 'disabled'. It specifies that the standard two way hello is supported. When the value is set to 'enabled' it specifies that the three way hello is supported. However this will not be compatible with releases 3.0R10, 3.0R11, 4.0R2 and 4.0R3." DEFVAL { disabled } ::= { vRtrPimNgIfEntry 16 } vRtrPimNgIfMcacPolicyName OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacPolicyName specifies the name of the multicast CAC policy. The multicast cac policy applies the interface cac algorithm if the channel(group) on this interface is part of the policy as specified in vRtrPimNgIfMcacPolicyName." DEFVAL { "" } ::= { vRtrPimNgIfEntry 17 } vRtrPimNgIfMcacUnconstrainedBW OBJECT-TYPE SYNTAX Integer32 (-1 | 0..2147483647) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacUnconstrainedBW specifies the bandwidth assigned for interface's multicast cac policy traffic in kilobits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of vRtrPimNgIfMcacUnconstrainedBW is set to '0' and if a multicast cac policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface." DEFVAL { -1 } ::= { vRtrPimNgIfEntry 18 } vRtrPimNgIfMcacConstAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacConstAdminState specifies the administrative state of the multicast CAC policy's constraints." DEFVAL { inService } ::= { vRtrPimNgIfEntry 19 } vRtrPimNgIfMcacPreRsvdMandBW OBJECT-TYPE SYNTAX Integer32 (-1 | 0..2147483647) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacPreRsvdMandBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilobits per second(kbps). If the value of vRtrPimNgIfMcacUnconstrainedBW is '0', no mandatory channels are allowed. If the value of vRtrPimNgIfMcacUnconstrainedBW is '-1', then all mandatory and optional channels are allowed. If the value of vRtrPimNgIfMcacPreRsvdMandBW is equal to the value of vRtrPimNgIfMcacUnconstrainedBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast cac policy on that interface and no optional groups (channels) are allowed. The value of vRtrPimNgIfMcacPreRsvdMandBW should always be less than or equal to that of vRtrPimNgIfMcacUnconstrainedBW. An attempt to set the value of vRtrPimNgIfMcacPreRsvdMandBW greater than that of vRtrPimNgIfMcacUnconstrainedBW will result in inconsistent value error." DEFVAL { -1 } ::= { vRtrPimNgIfEntry 20 } vRtrPimNgIfMcacinUseMandBw OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacinUseMandBw indicates the in-use bandwidth in kilobits per second(kbps) for the mandatory channels for this protocol interface instance." ::= { vRtrPimNgIfEntry 21 } vRtrPimNgIfMcacinUseOpnlBw OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacinUseOpnlBw indicates the in-use bandwidth in kilobits per second(kbps) for the optional channels for this protocol interface instance." ::= { vRtrPimNgIfEntry 22 } vRtrPimNgIfMcacAvailMandBw OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacAvailMandBw indicates the pre-reserved bandwidth in kilobits per second(kbps) for the mandatory channels for this interface instance." ::= { vRtrPimNgIfEntry 23 } vRtrPimNgIfMcacAvailOpnlBw OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacAvailOpnlBw indicates the available bandwidth in kilobits per second(kbps) for this interface instance." ::= { vRtrPimNgIfEntry 24 } vRtrPimNgIfMcacValuesInTransit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacValuesInTransit indicates that the operational (available and in-use mandatory or optional) value for the following objects are in transition due to configuration change: vRtrPimNgIfMcacAvailMandBw vRtrPimNgIfMcacAvailOpnlBw vRtrPimNgIfMcacinUseMandBw vRtrPimNgIfMcacinUseOpnlBw When Multicast CAC Policy is applied on the interface for the join of the next channel, the operational values will be recalculated and applied to the above objects and the value for vRtrPimNgIfMcacValuesInTransit will be set to 'false'. If the value of vRtrPimNgIfMcacValuesInTransit is 'true' then the values are in transition." ::= { vRtrPimNgIfEntry 25 } vRtrPimNgIfDRPriority OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfDRPriority specifies the value sent in PIM Hello messages and used by routers to elect the Designated Router(DR). The DR election priority is a 32-bit unsigned number and the numerically larger priority is always preferred." DEFVAL { 1 } ::= { vRtrPimNgIfEntry 26 } vRtrPimNgIfAssertPeriod OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfAssertPeriod specifies the period in seconds for periodic refreshes of PIM Assert messages on an interface." DEFVAL { 60 } ::= { vRtrPimNgIfEntry 27 } vRtrPimNgIfInstantPruneEcho OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfInstantPruneEcho specifies whether PIM will send an instant Prune Echo when the upstream router enters Prune-Pending state on this interface. A Prune Echo is simply a Prune message sent by the upstream router with its own address in the Upstream Neighbor Address field. Due to this, all downstream routers will see the Prune message and they can send a join override if interested in the group. This is not only useful on NMBA networks, but also can be used on a LAN environment to improve reliability." DEFVAL { disabled } ::= { vRtrPimNgIfEntry 28 } vRtrPimNgIfIpv6EnableBfd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfIpv6EnableBfd specifies whether Bi-directional Forwarding Detection is enabled for Ipv6 on this PIM interface. When the value is 'true', this PIM interface can establish BFD sessions and use BFD as a signaling mechanism. When it is 'false', it cannot use BFD for Ipv6." DEFVAL { false } ::= { vRtrPimNgIfEntry 29 } vRtrPimNgIfP2mpLdpTreeJoin OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrPimNgIfP2mpLdpTreeJoin specifies whether to join a P2MP LDP tree towards a multicast source. When the value is 'true', a multicast join received on an interface is processed to join a PIM multicast tree and also copied over to LDP to join the in-band signaled P2MP tree for the same multicast flow. LDP P2MP tree is setup either to RP (ASM group) or source (SSM group). The route to the RP or the source of the multicast node is looked up from the RTM. The next-hop address for the route to RP or source is set as the root of LDP P2MP tree. When it is 'false', the P2MP LDP tree is disjoined from the multicast source. This object has been replaced by vRtrPimNgIfP2mpLdpTreeJoinType in 13.0." DEFVAL { false } ::= { vRtrPimNgIfEntry 30 } vRtrPimNgIfExtranetType OBJECT-TYPE SYNTAX INTEGER { rx (0), tx (1), none (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfExtranetType indicates whether the extranet interface is of type transmitter or receiver." ::= { vRtrPimNgIfEntry 31 } vRtrPimNgIfExtranetMvpnId OBJECT-TYPE SYNTAX Unsigned32 (0..10240) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfExtranetMvpnId indicates the id associated with the extranet interface. If the interface is not an extranet interface then the value of this object will be '0'." ::= { vRtrPimNgIfEntry 32 } vRtrPimNgIfMcacUseLagPortWeight OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacUseLagPortWeight specifies if this system must use the LAG port weight while calculating Multicast CAC constraints. The LAG port weight is configured with the object TIMETRA-LAG-MIB::tLagPortWeightSpeed." DEFVAL { false } ::= { vRtrPimNgIfEntry 33 } vRtrPimNgIfP2mpLdpTreeJoinType OBJECT-TYPE SYNTAX BITS { ipv4 (0), ipv6 (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfP2mpLdpTreeJoinType specifies the option to to join a P2MP LDP tree towards the multicast source. When the value of this object is set to other than 'none', then a PIM multicast join received on an interface is processed to join P2MP LDP LSP using the in-band signaled P2MP tree for the same multicast flow. LDP P2MP tree is setup towards the multicast source. Route to source of the multicast node is looked up from the RTM. The next-hop address for the route to source is set as the root of LDP P2MP tree. When the value is set to 'ipv4' or 'ipv6', it enables dynamic mLDP in-band signaling for IPv4 or IPv6 PIM joins respectively. When both 'ipv4' and 'ipv6' are set then it enables dynamic mLDP in-band signaling for IPv4 and IPv6 PIM joins. When it is 'none', the P2MP LDP tree is disjoined from the multicast source." DEFVAL { {} } ::= { vRtrPimNgIfEntry 34 } vRtrPimNgIfPmsiType OBJECT-TYPE SYNTAX INTEGER { none (0), ipmsiTx (1), ipmsiRx (2), spmsiTx (3), spmsiRx (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfPmsiType indicates the type of the tunnel interface." ::= { vRtrPimNgIfEntry 35 } vRtrPimNgIfMcacIfPolicyName OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfMcacIfPolicyName specifies the name of the multicast CAC interface policy. The multicast cac policy applies the interface cac algorithm if the channel(group) on this interface is part of the policy as specified in vRtrPimNgIfMcacIfPolicyName." DEFVAL { "" } ::= { vRtrPimNgIfEntry 36 } vRtrPimNgIfBierSignalingType OBJECT-TYPE SYNTAX BITS { ipv4 (0), ipv6 (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgIfBierSignalingType specifies the option to to join a P2MP BIER Tunnel towards the multicast source. When the value of this object is set to other than 'none', then a PIM multicast join received on an interface is processed to join P2MP BIER Tunnel using in-band signaling of the PIM joins over the BIER core for the same multicast flow. P2MP BIER Tunnel is setup towards the multicast source. Route to source of the multicast node is looked up from the RTM. The next-hop address for the route to source is set as the root of P2MP BIER Tunnel. When the value is set to 'ipv4' or 'ipv6', it enables BIER in-band signaling for IPv4 or IPv6 PIM joins respectively. When both 'ipv4' and 'ipv6' are set then it enables BIER in-band signaling for IPv4 and IPv6 PIM joins. When it is 'none', the BIER tunnel is disjoined from the multicast source." DEFVAL { {} } ::= { vRtrPimNgIfEntry 37 } vRtrPimNgIfBierSigTransportType OBJECT-TYPE SYNTAX INTEGER { tx (0), rx (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfBierSigTransportType indicates whether transport for the bier signaling type is of type transmitter or receiver." ::= { vRtrPimNgIfEntry 38 } vRtrPimNgAFIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgAFIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the interfaces on which PIM protocol operation is enabled." ::= { vRtrPimNgIfObjs 3 } vRtrPimNgAFIfEntry OBJECT-TYPE SYNTAX VRtrPimNgAFIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrPimNgAFIfTable represents an interface on this router that participates in the PIM protocol." INDEX { vRtrID, vRtrIfIndex, vRtrPimNgAFIfAFType } ::= { vRtrPimNgAFIfTable 1 } VRtrPimNgAFIfEntry ::= SEQUENCE { vRtrPimNgAFIfAFType TmnxMulticastAddrFamily, vRtrPimNgAFIfAdminState TmnxAdminState, vRtrPimNgAFIfOperState TmnxOperState, vRtrPimNgAFIfMdtDefGrpAddrType InetAddressType, vRtrPimNgAFIfMdtDefGrpAddress InetAddress, vRtrPimNgAFIfNextHelloTime Unsigned32, vRtrPimNgAFIfOperDRPriority Unsigned32, vRtrPimNgAFIfCurrentGroups Gauge32, vRtrPimNgAFIfMaxGroupsTillNow Counter32, vRtrPimNgAFIfDRType InetAddressType, vRtrPimNgAFIfDR InetAddress, vRtrPimNgAFIfTrackSprtOperState TruthValue, vRtrPimNgAFIfOperGroup TNamedItemOrEmpty, vRtrPimNgAFIfOperGroupDPAction INTEGER, vRtrPimNgAFIfOpGrpDeltaPriority Unsigned32 } vRtrPimNgAFIfAFType OBJECT-TYPE SYNTAX TmnxMulticastAddrFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgAFIfAFType indicates the address family type supported by the PIM on this interface." ::= { vRtrPimNgAFIfEntry 1 } vRtrPimNgAFIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFIfAdminState specifies the desired administrative state associated with this address family for PIM protocol on this interface." DEFVAL { inService } ::= { vRtrPimNgAFIfEntry 2 } vRtrPimNgAFIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfOperState indicates the current operational state associated with this address family for PIM protocol on this interface." ::= { vRtrPimNgAFIfEntry 3 } vRtrPimNgAFIfMdtDefGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfMdtDefGrpAddrType indicates the type of address represented by vRtrPimNgAFIfMdtDefGrpAddress." ::= { vRtrPimNgAFIfEntry 4 } vRtrPimNgAFIfMdtDefGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfMdtDefGrpAddress indicates the default group address used for Multicast Distribution Tree (MDT). It is applicable only when this entry corresponds to a Multicast Tunnel(MT) interface for a particular VPRN." ::= { vRtrPimNgAFIfEntry 5 } vRtrPimNgAFIfNextHelloTime OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfNextHelloTime indicates the time in which the next PIM Hello message will be transmitted on this interface." ::= { vRtrPimNgAFIfEntry 6 } vRtrPimNgAFIfOperDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfOperDRPriority indicates the priority of the current DR on a LAN. This value is different from the configured PIM DR priority and is the result of the PIM DR election process. The value of vRtrPimNgAFIfOperDRPriority will be 0 if the interface is operationally down and DR election has not taken place." ::= { vRtrPimNgAFIfEntry 7 } vRtrPimNgAFIfCurrentGroups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfCurrentGroups indicates the number of groups that currently have this interface as an outgoing interface." ::= { vRtrPimNgAFIfEntry 8 } vRtrPimNgAFIfMaxGroupsTillNow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfMaxGroupsTillNow indicates the highest value that vRtrPimNgAFIfCurrentGroups had till now." ::= { vRtrPimNgAFIfEntry 9 } vRtrPimNgAFIfDRType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfDRType indicates the type of the address of the designated Router on this PIM interface." ::= { vRtrPimNgAFIfEntry 10 } vRtrPimNgAFIfDR OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfDR indicates the Designated Router on this PIM interface." ::= { vRtrPimNgAFIfEntry 11 } vRtrPimNgAFIfTrackSprtOperState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFIfTrackSprtOperState indicates the operational status of PIM tracking support. The value of vRtrPimNgAFIfTrackSprtOperState is set to 'inService' when all PIM routers on a LAN support join or prune tracking." ::= { vRtrPimNgAFIfEntry 12 } vRtrPimNgAFIfOperGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFIfOperGroup specifies the operational group whose state PIM will monitor." DEFVAL { "" } ::= { vRtrPimNgAFIfEntry 13 } vRtrPimNgAFIfOperGroupDPAction OBJECT-TYPE SYNTAX INTEGER { none (0), add (1), subtract (2), set (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFIfOperGroupDPAction specifies the action that needs to be performed on DR priority if the status of the operational group specified by vRtrPimNgAFIfOperGroup changes to up. When the value is set to 'add', it specifies that vRtrPimNgAFIfOpGrpDeltaPriority needs to be added to DR priority.If it is set to 'subtract', it specifies that vRtrPimNgAFIfOpGrpDeltaPriority needs to be subtracted from DR priority. If it is set to 'set', it specifies that DR priority needs to be set to vRtrPimNgAFIfOpGrpDeltaPriority." DEFVAL { none } ::= { vRtrPimNgAFIfEntry 14 } vRtrPimNgAFIfOpGrpDeltaPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrPimNgAFIfOpGrpDeltaPriority specifies the value by which the DR priority needs to change when the status of the operational group specified by vRtrPimNgAFIfOperGroup changes to up." DEFVAL { 0 } ::= { vRtrPimNgAFIfEntry 15 } vRtrPimNgIfNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the router's PIM neighbors on an interface." ::= { vRtrPimNgIfObjs 4 } vRtrPimNgIfNeighborEntry OBJECT-TYPE SYNTAX VRtrPimNgIfNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgIfNeighborTable. Entries in this table cannot be created or deleted using SNMP." INDEX { vRtrID, vRtrIfIndex, vRtrPimNgIfNeighborAddressType, vRtrPimNgIfNeighborAddress } ::= { vRtrPimNgIfNeighborTable 1 } VRtrPimNgIfNeighborEntry ::= SEQUENCE { vRtrPimNgIfNeighborAddressType InetAddressType, vRtrPimNgIfNeighborAddress InetAddress, vRtrPimNgIfNeighborUpTime Unsigned32, vRtrPimNgIfNeighborExpiryTime Unsigned32, vRtrPimNgIfNeighborGenId Unsigned32, vRtrPimNgIfNeighborDrPriority Unsigned32, vRtrPimNgIfNeighborDrPriorPrsnt TruthValue, vRtrPimNgIfNeighborLanDelay Unsigned32, vRtrPimNgIfNeighborLanDlayPrsnt TruthValue, vRtrPimNgIfNeighborTrckngSpprt TruthValue, vRtrPimNgIfNeighborHoldTime Unsigned32, vRtrPimNgIfNeighborOvrdeIntrvl Unsigned32, vRtrPimNgIfNeighborJASupport TruthValue } vRtrPimNgIfNeighborAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborAddressType indicates the type of IP address of the PIM neighbor." ::= { vRtrPimNgIfNeighborEntry 1 } vRtrPimNgIfNeighborAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborAddress indicates the IP address of the PIM neighbor for which this entry contains information." ::= { vRtrPimNgIfNeighborEntry 2 } vRtrPimNgIfNeighborUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborUpTime indicates the time since this PIM neighbor (last) became a neighbor of the local router." ::= { vRtrPimNgIfNeighborEntry 3 } vRtrPimNgIfNeighborExpiryTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborExpiryTime indicates the minimum time remaining before this PIM neighbor will be aged out. If the value of this object is zero, it means that this neighbor will never be aged out. This happens when the PIM neighbor sends a Hello message with Holdtime set to `0xffff'." ::= { vRtrPimNgIfNeighborEntry 4 } vRtrPimNgIfNeighborGenId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborGenId indicates a randomly generated 32-bit value that is regenerated each time PIM forwarding is started or restarted on the interface, including when the router itself restarts. When a Hello message with a new vRtrPimNgIfNeighborGenId is received from a neighbor, any old Hello information about that neighbor is discarded and superseded by the information from the new Hello message." ::= { vRtrPimNgIfNeighborEntry 5 } vRtrPimNgIfNeighborDrPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborDrPriority indicates neighbor's DR priority which is received in the hello message. If the Hello Message did not contain the DR priority field, the value of this object will be set to '1' and vRtrPimNgIfNeighborDrPriorPrsnt will be set to 'false'." ::= { vRtrPimNgIfNeighborEntry 6 } vRtrPimNgIfNeighborDrPriorPrsnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborDrPriorPrsnt indicates whether the DR priority field was present in the Hello message received from the PIM neighbor. If present, the value is set to 'true'." ::= { vRtrPimNgIfNeighborEntry 7 } vRtrPimNgIfNeighborLanDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborLanDelay indicates the lan delay field present in the Hello message received from the neighbor. If the neighbor did not send this field, a default value of 500 ms is used and the value of vRtrPimNgIfNeighborLanDlayPrsnt is set to 'false'." ::= { vRtrPimNgIfNeighborEntry 8 } vRtrPimNgIfNeighborLanDlayPrsnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborLanDlayPrsnt indicates whether the Hello message received from the neighbor contained the Lan Delay field. If present, the value is set to 'true'." ::= { vRtrPimNgIfNeighborEntry 9 } vRtrPimNgIfNeighborTrckngSpprt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborTrckngSpprt indicates whether the T bit in the LAN Prune Delay option was present in the Hello message. This indicates the neighbor's capability to disable Join message suppression." ::= { vRtrPimNgIfNeighborEntry 10 } vRtrPimNgIfNeighborHoldTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborHoldTime contains the value of the hold time present in the Hello message." ::= { vRtrPimNgIfNeighborEntry 11 } vRtrPimNgIfNeighborOvrdeIntrvl OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborOvrdeIntrvl contains the value of the override interval present in the Hello message." ::= { vRtrPimNgIfNeighborEntry 12 } vRtrPimNgIfNeighborJASupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfNeighborJASupport indicates whether the Hello Message received from the neighbor contained the Join Attribute field. If it is present, then the value of vRtrPimNgIfNeighborJASupport is set to 'true'." ::= { vRtrPimNgIfNeighborEntry 13 } vRtrPimNgIfGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the (*,*,RP), (*,G) and (S,G) and (S,G,rpt) entries for which this particular interface has state." ::= { vRtrPimNgIfObjs 5 } vRtrPimNgIfGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgIfGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgIfGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrIfIndex, vRtrPimNgIfGrpSrcType, vRtrPimNgIfGrpSrcGroupAddrType, vRtrPimNgIfGrpSrcGroupAddress, vRtrPimNgIfGrpSrcSourceAddrType, vRtrPimNgIfGrpSrcSourceAddress } ::= { vRtrPimNgIfGrpSrcTable 1 } VRtrPimNgIfGrpSrcEntry ::= SEQUENCE { vRtrPimNgIfGrpSrcType INTEGER, vRtrPimNgIfGrpSrcGroupAddrType InetAddressType, vRtrPimNgIfGrpSrcGroupAddress InetAddress, vRtrPimNgIfGrpSrcSourceAddrType InetAddressType, vRtrPimNgIfGrpSrcSourceAddress InetAddress, vRtrPimNgIfGrpSrcRPAddrType InetAddressType, vRtrPimNgIfGrpSrcRPAddress InetAddress, vRtrPimNgIfGrpSrcJPState INTEGER, vRtrPimNgIfGrpSrcPrunePendTimer Unsigned32, vRtrPimNgIfGrpSrcJoinPruneTimer Unsigned32, vRtrPimNgIfGrpSrcJPRptState INTEGER, vRtrPimNgIfGrpSrcRptPrnePendTmr Unsigned32, vRtrPimNgIfGrpSrcRptJoinPrneTmr Unsigned32, vRtrPimNgIfGrpSrcAssertState INTEGER, vRtrPimNgIfGrpSrcAssertTimer Unsigned32, vRtrPimNgIfGrpSrcAssertMetric Unsigned32, vRtrPimNgIfGrpSrcAsrtMetricPref Unsigned32, vRtrPimNgIfGrpSrcAssertRPTBit TruthValue, vRtrPimNgIfGrpSrcAsrtWinnerMtrc Unsigned32, vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf Unsigned32, vRtrPimNgIfGrpSrcAsrtWnrRPTBit TruthValue, vRtrPimNgIfGrpSrcAsrtWnrAddrTyp InetAddressType, vRtrPimNgIfGrpSrcAsrtWinnerAddr InetAddress, vRtrPimNgIfGrpSrcUpTime Unsigned32, vRtrPimNgIfGrpSrcDataMtIfIndex InterfaceIndexOrZero } vRtrPimNgIfGrpSrcType OBJECT-TYPE SYNTAX INTEGER { starStarRP (0), starG (1), sg (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcType indicates the type of this entry for this table." ::= { vRtrPimNgIfGrpSrcEntry 1 } vRtrPimNgIfGrpSrcGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcGroupAddrType indicates the type of address of the multicast group address." ::= { vRtrPimNgIfGrpSrcEntry 2 } vRtrPimNgIfGrpSrcGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcGroupAddress indicates the multicast group address of the entry. It will be zero if the vRtrPimNgIfGrpSrcType is 'starStarRP'." ::= { vRtrPimNgIfGrpSrcEntry 3 } vRtrPimNgIfGrpSrcSourceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcSourceAddrType indicates the type of source address of the multicast sender." ::= { vRtrPimNgIfGrpSrcEntry 4 } vRtrPimNgIfGrpSrcSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcSourceAddress indicates the source address of the multicast sender. It will be zero if the vRtrPimNgIfGrpSrcType is 'starG' and it will be the address of the Rendezvous Point(RP) if the vRtrPimNgIfGrpSrcType is 'starStarRP'." ::= { vRtrPimNgIfGrpSrcEntry 5 } vRtrPimNgIfGrpSrcRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRPAddrType indicates the type of address of the Rendezvous Point(RP)." ::= { vRtrPimNgIfGrpSrcEntry 6 } vRtrPimNgIfGrpSrcRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRPAddress indicates the address of the Rendezvous Point(RP)." ::= { vRtrPimNgIfGrpSrcEntry 7 } vRtrPimNgIfGrpSrcJPState OBJECT-TYPE SYNTAX INTEGER { noInfo (0), join (1), prunePend (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcJPState indicates the Join Prune state for this entry on the interface. PIM Join or Prune messages are sent by the downstream routers towards the RPF' neighbor." ::= { vRtrPimNgIfGrpSrcEntry 8 } vRtrPimNgIfGrpSrcPrunePendTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcPrunePendTimer indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is set when the PIM Prune message is received." ::= { vRtrPimNgIfGrpSrcEntry 9 } vRtrPimNgIfGrpSrcJoinPruneTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcJoinPruneTimer indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is started or restarted when a valid Join message is received. If the value of this object is zero and vRtrPimNgIfGrpSrcJPState is 'join' state, it means that the downstream router sent a holdtime of '0xffff'. In this case, vRtrPimNgIfGrpSrcJPState will not transition until an appropriate cancelling of Join or Prune message is received." ::= { vRtrPimNgIfGrpSrcEntry 10 } vRtrPimNgIfGrpSrcJPRptState OBJECT-TYPE SYNTAX INTEGER { noInfo (0), join (1), prunePend (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcJPRptState indicates the Join Prune Rpt state for this entry on the interface. PIM Join or Prune messages are sent by the downstream routers towards the RPF' neighbor. (S,G,rpt) state is a result of receiving (S,G, rpt) JP message from the downstream router on the RP tree." ::= { vRtrPimNgIfGrpSrcEntry 11 } vRtrPimNgIfGrpSrcRptPrnePendTmr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRptPrnePendTmr indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is set when the (S,G,rpt) PIM Prune message is received." ::= { vRtrPimNgIfGrpSrcEntry 12 } vRtrPimNgIfGrpSrcRptJoinPrneTmr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRptJoinPrneTmr indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is started or restarted when a valid Join message is received. If the value of this object is zero and vRtrPimNgIfGrpSrcJPRptState is in 'join' state, it means that the downstream router sent a holdtime of '0xffff'. In this case, vRtrPimNgIfGrpSrcJPRptState will not transition until an appropriate cancelling of Join or Prune message is received from the downstream router." ::= { vRtrPimNgIfGrpSrcEntry 13 } vRtrPimNgIfGrpSrcAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (0), lostAssert (1), wonAssert (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAssertState indicates the ASSERT state for this entry. Where multiple PIM routers peer over a shared LAN it is possible for more than one upstream router to have valid forwarding state for a packet, which can lead to packet duplication. PIM does not attempt to prevent this from occurring. Instead it detects when this has happened and elects a single forwarder amongst the upstream routers to prevent further duplication. This election is performed using PIM Assert messages. Assert messages are also received by downstream routers on the LAN, and these cause subsequent Join or Prune messages to be sent to the upstream router that won the Assert." ::= { vRtrPimNgIfGrpSrcEntry 14 } vRtrPimNgIfGrpSrcAssertTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining before the router transitions the vRtrPimNgIfGrpSrcAssertState to 'noInfo' if the value of vRtrPimNgIfGrpSrcAssertState is 'lostAssert'. If the value of vRtrPimNgIfGrpSrcAssertState is 'wonAssert', the value of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining before it resends the ASSERT message." ::= { vRtrPimNgIfGrpSrcEntry 15 } vRtrPimNgIfGrpSrcAssertMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAssertMetric indicates the metric associated by the MRIB for the route towards the source or the RP." ::= { vRtrPimNgIfGrpSrcEntry 16 } vRtrPimNgIfGrpSrcAsrtMetricPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtMetricPref indicates the preference associated by the MRIB for the route towards the source or the RP." ::= { vRtrPimNgIfGrpSrcEntry 17 } vRtrPimNgIfGrpSrcAssertRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAssertRPTBit is 'true' if the RPT bit is set and 'false' when the RPT bit is not set." ::= { vRtrPimNgIfGrpSrcEntry 18 } vRtrPimNgIfGrpSrcAsrtWinnerMtrc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtWinnerMtrc indicates the ASSERT winner's metric associated by it's MRIB for the route towards the source or the RP." ::= { vRtrPimNgIfGrpSrcEntry 19 } vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf indicates the ASSERT winner's preference associated by it's MRIB for the route towards the source or the RP." ::= { vRtrPimNgIfGrpSrcEntry 20 } vRtrPimNgIfGrpSrcAsrtWnrRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtWnrRPTBit is 'true' if the RPT bit is set and 'false' when the RPT bit is not set." ::= { vRtrPimNgIfGrpSrcEntry 21 } vRtrPimNgIfGrpSrcAsrtWnrAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtWnrAddrTyp indicates type of address of the ASSERT winner's interface IP address." ::= { vRtrPimNgIfGrpSrcEntry 22 } vRtrPimNgIfGrpSrcAsrtWinnerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcAsrtWinnerAddr indicates the ASSERT winner's interface IP address." ::= { vRtrPimNgIfGrpSrcEntry 23 } vRtrPimNgIfGrpSrcUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcUpTime indicates the time since this source group entry got created." ::= { vRtrPimNgIfGrpSrcEntry 24 } vRtrPimNgIfGrpSrcDataMtIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcDataMtIfIndex indicates the interface index of the Multicast Tunnel(MT) interface. If the value of vRtrPimNgIfGrpSrcDataMtIfIndex is zero, it indicates that there is no data MT associated with this group-source interface to forward multicast traffic into the service provider network. If the value of vRtrPimNgIfGrpSrcDataMtIfIndex is non-zero, it indicates the data MT tunnel that is used to forward multicast traffic into the service provider network." ::= { vRtrPimNgIfGrpSrcEntry 25 } vRtrPimNgIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the PIM statistics for a particular interface." ::= { vRtrPimNgIfObjs 6 } vRtrPimNgIfStatsEntry OBJECT-TYPE SYNTAX VRtrPimNgIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgIfStatsTable." AUGMENTS { vRtrPimNgAFIfEntry } ::= { vRtrPimNgIfStatsTable 1 } VRtrPimNgIfStatsEntry ::= SEQUENCE { vRtrPimNgIfTxPkts Counter32, vRtrPimNgIfTxHellos Counter32, vRtrPimNgIfTxAsserts Counter32, vRtrPimNgIfTxRegisterStops Counter32, vRtrPimNgIfTxRegisterStopErrs Counter32, vRtrPimNgIfTxBsmPdus Counter32, vRtrPimNgIfTxBsmErrs Counter32, vRtrPimNgIfRxPkts Counter32, vRtrPimNgIfRxHellos Counter32, vRtrPimNgIfRxHellosDropped Counter32, vRtrPimNgIfRxNbrUnknown Counter32, vRtrPimNgIfRxBadChecksumDiscard Counter32, vRtrPimNgIfRxBadVersionDiscard Counter32, vRtrPimNgIfRxBadEncodings Counter32, vRtrPimNgIfRxAsserts Counter32, vRtrPimNgIfRxAssertErrs Counter32, vRtrPimNgIfRxRegisters Counter32, vRtrPimNgIfRxRegisterErrs Counter32, vRtrPimNgIfRxNullRegisters Counter32, vRtrPimNgIfRxRegisterStops Counter32, vRtrPimNgIfRxRegisterStopErrs Counter32, vRtrPimNgIfRxCRPAdvNoRtrAlert Counter32, vRtrPimNgIfRxBsmPdus Counter32, vRtrPimNgIfRxBsmPduDrops Counter32, vRtrPimNgIfStarStarRPTypes Gauge32, vRtrPimNgIfStarGTypes Gauge32, vRtrPimNgIfSGTypes Gauge32, vRtrPimNgIfJoinPolicyDrops Counter32, vRtrPimNgIfRegisterPolicyDrops Counter32, vRtrPimNgIfBtrImpPolicyDrops Counter32, vRtrPimNgIfBtrExpPolicyDrops Counter32, vRtrPimNgIfTxJoinPrunes Counter32, vRtrPimNgIfRxJoinPrunes Counter32, vRtrPimNgIfRxInvalidJoinPrunes Counter32, vRtrPimNgIfRxInvalidRegisters Counter32, vRtrPimNgIfRxUnknownPdus Counter32, vRtrPimNgIfRxJoinPruneErrs Counter32, vRtrPimNgIfRxBSMNoRouterAlertDrops Counter32, vRtrPimNgIfRxBSMWrongIfDrops Counter32, vRtrPimNgIfMcacPolicyDrops Counter32, vRtrPimNgIfTxIntraASAD Counter32, vRtrPimNgIfRxIntraASAD Counter32, vRtrPimNgIfRxIntraASADErrs Counter32, vRtrPimNgIfTxInterASAD Counter32, vRtrPimNgIfRxInterASAD Counter32, vRtrPimNgIfRxInterASADErrs Counter32, vRtrPimNgIfTxSpmsiAD Counter32, vRtrPimNgIfRxSpmsiAD Counter32, vRtrPimNgIfRxSpmsiADErrs Counter32, vRtrPimNgIfTxLeafAD Counter32, vRtrPimNgIfRxLeafAD Counter32, vRtrPimNgIfRxLeafADErrs Counter32, vRtrPimNgIfTxSrcActAD Counter32, vRtrPimNgIfRxSrcActAD Counter32, vRtrPimNgIfTxSrcActADErrs Counter32, vRtrPimNgIfTxSharedTreeJoin Counter32, vRtrPimNgIfRxSharedTreeJoin Counter32, vRtrPimNgIfRxSharedTreeJoinErrs Counter32, vRtrPimNgIfTxSrcTreeJoin Counter32, vRtrPimNgIfRxSrcTreeJoin Counter32, vRtrPimNgIfRxSrcTreeJoinErrs Counter32, vRtrPimNgIfTxBgpPkts Counter32, vRtrPimNgIfRxBgpPkts Counter32, vRtrPimNgIfTxMdtSafi Counter32, vRtrPimNgIfRxMdtSafi Counter32, vRtrPimNgIfRxMdtSafiErrs Counter32, vRtrPimNgIfRxAutoRpGenErrs Counter32, vRtrPimNgIfRxAutoRpAnnounce Counter32, vRtrPimNgIfTxAutoRpAnnounce Counter32, vRtrPimNgIfRxAutoRpAnnounceErrs Counter32, vRtrPimNgIfTxAutoRpAnnounceErrs Counter32, vRtrPimNgIfRxAutoRpMapping Counter32, vRtrPimNgIfTxAutoRpMapping Counter32, vRtrPimNgIfRxAutoRpMappingErrs Counter32, vRtrPimNgIfTxAutoRpMappingErrs Counter32, vRtrPimNgIfRxJoinPrunesMvpnRpfv Counter32, vRtrPimNgIfTxJoinPrunesMvpnRpfv Counter32, vRtrPimNgIfRxInvalidJPMvpnRpfv Counter32, vRtrPimNgIfGraftsRx Counter32, vRtrPimNgIfGraftsTx Counter32, vRtrPimNgIfGraftsRxErrors Counter32, vRtrPimNgIfGraftsAckRx Counter32, vRtrPimNgIfGraftsAckTx Counter32, vRtrPimNgIfGraftsAckRxErrors Counter32, vRtrPimNgIfRxAutoRpMappingRpfMM Counter32, vRtrPimNgIfRxAutoRpAnnounceRpfMM Counter32 } vRtrPimNgIfTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxPkts indicates the number of multicast data packets transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 1 } vRtrPimNgIfTxHellos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxHellos indicates the number of PIM Hello messages transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 2 } vRtrPimNgIfTxAsserts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxAsserts indicates the number of PIM Assert messages transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 3 } vRtrPimNgIfTxRegisterStops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxRegisterStops indicates the number of PIM Register Stop messages transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 4 } vRtrPimNgIfTxRegisterStopErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxRegisterStopErrs indicates the number of PIM errors while trasmitting PIM Register Stop messages on this interface." ::= { vRtrPimNgIfStatsEntry 5 } vRtrPimNgIfTxBsmPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxBsmPdus indicates the number of PIM Bootstrap Messages (BSM) transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 6 } vRtrPimNgIfTxBsmErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxBsmErrs indicates the number of errors while transmitting PIM Bootstrap Messages (BSM) on this interface." ::= { vRtrPimNgIfStatsEntry 7 } vRtrPimNgIfRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxPkts indicates the number of multicast data packets received on this interface." ::= { vRtrPimNgIfStatsEntry 8 } vRtrPimNgIfRxHellos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxHellos indicates the number of PIM hello messages received on this interface." ::= { vRtrPimNgIfStatsEntry 9 } vRtrPimNgIfRxHellosDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxHellosDropped indicates the number of PIM Hello messages which were received on this interface but were dropped." ::= { vRtrPimNgIfStatsEntry 10 } vRtrPimNgIfRxNbrUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxNbrUnknown indicates the number of PIM messages (other than Hello messages) which were received on this interface and were rejected because the adjacency with the neighbor router was not already established." ::= { vRtrPimNgIfStatsEntry 11 } vRtrPimNgIfRxBadChecksumDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBadChecksumDiscard indicates the number of PIM messages received on this interface which were discarded because of bad checksum." ::= { vRtrPimNgIfStatsEntry 12 } vRtrPimNgIfRxBadVersionDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBadVersionDiscard indicates the number of PIM messages with bad versions received on this interface." ::= { vRtrPimNgIfStatsEntry 13 } vRtrPimNgIfRxBadEncodings OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBadEncodings indicates the number of PIM messages with bad encodings received on this interface." ::= { vRtrPimNgIfStatsEntry 14 } vRtrPimNgIfRxAsserts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxAsserts indicates the number of PIM Assert messages received on this interface." ::= { vRtrPimNgIfStatsEntry 15 } vRtrPimNgIfRxAssertErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxAssertErrs indicates the number of errors while processing Assert messages received on this interface." ::= { vRtrPimNgIfStatsEntry 16 } vRtrPimNgIfRxRegisters OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxRegisters indicates the number of PIM Register messages received on this interface." ::= { vRtrPimNgIfStatsEntry 17 } vRtrPimNgIfRxRegisterErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxRegisterErrs indicates the number of errors while processing Register messages received on this interface." ::= { vRtrPimNgIfStatsEntry 18 } vRtrPimNgIfRxNullRegisters OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxNullRegisters indicates the number of PIM Null Register messages received on this interface." ::= { vRtrPimNgIfStatsEntry 19 } vRtrPimNgIfRxRegisterStops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxRegisterStops indicates the number of PIM Register Stop messages received on this interface." ::= { vRtrPimNgIfStatsEntry 20 } vRtrPimNgIfRxRegisterStopErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxRegisterStopErrs indicates the number of errors while processing Register Stop messages received on this interface." ::= { vRtrPimNgIfStatsEntry 21 } vRtrPimNgIfRxCRPAdvNoRtrAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxCRPAdvNoRtrAlert indicates the number of Candidate-RP Advertisements(C-RP-Adv) received on this interface which had no router alert option set." ::= { vRtrPimNgIfStatsEntry 22 } vRtrPimNgIfRxBsmPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBsmPdus indicates the number of Bootstrap Messages received on this interface." ::= { vRtrPimNgIfStatsEntry 23 } vRtrPimNgIfRxBsmPduDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBsmPduDrops indicates the number of Bootstrap Messages received on this interface but were dropped." ::= { vRtrPimNgIfStatsEntry 24 } vRtrPimNgIfStarStarRPTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfStarStarRPTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'starStarRP'." ::= { vRtrPimNgIfStatsEntry 25 } vRtrPimNgIfStarGTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfStarGTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'starG'." ::= { vRtrPimNgIfStatsEntry 26 } vRtrPimNgIfSGTypes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfSGTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'sg'." ::= { vRtrPimNgIfStatsEntry 27 } vRtrPimNgIfJoinPolicyDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfJoinPolicyDrops indicates the number of times the join policy match resulted in dropping PIM Join-Prune Message or one of the source group contained in the message. PIM Join policies are configured using join policy objects in vRtrPimNgGenPolicyTable." ::= { vRtrPimNgIfStatsEntry 28 } vRtrPimNgIfRegisterPolicyDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRegisterPolicyDrops indicates the number of times the register policy match resulted in dropping PIM Register Message. PIM Register policies are configured using the register policy objects in vRtrPimNgGenPolicyTable." ::= { vRtrPimNgIfStatsEntry 29 } vRtrPimNgIfBtrImpPolicyDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfBtrImpPolicyDrops indicates the number of Bootstrap Messages received on this interface but were dropped because of Bootstrap import policy. PIM Bootstrap import policies are configured using bootstrap import policy objects in vRtrPimNgGenPolicyTable." ::= { vRtrPimNgIfStatsEntry 30 } vRtrPimNgIfBtrExpPolicyDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfBtrExpPolicyDrops indicates the number of Bootstrap Messages that were not transmitted on this interface because of Bootstrap export policy. PIM Bootstrap export policies are configured using bootstrap export policy objects in vRtrPimNgGenPolicyTable." ::= { vRtrPimNgIfStatsEntry 31 } vRtrPimNgIfTxJoinPrunes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxJoinPrunes indicates the number of PIM Join Prune messages transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 32 } vRtrPimNgIfRxJoinPrunes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxJoinPrunes indicates the number of PIM Join Prune messages received on this interface." ::= { vRtrPimNgIfStatsEntry 33 } vRtrPimNgIfRxInvalidJoinPrunes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxInvalidJoinPrunes indicates the number of invalid PIM Join Prune messages received on this interface. A Join Prune message is invalid when the RP address in the message is not the RP for the group specified in the message. If such a message arrives, a vRtrPimNgInvalidJoinPrune notification is sent." ::= { vRtrPimNgIfStatsEntry 34 } vRtrPimNgIfRxInvalidRegisters OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxInvalidRegisters indicates the number of invalid PIM Register messages received on this interface. A Register message is invalid when the RP address in the message is not the RP for the group specified in the message. If such a message arrives, a vRtrPimNgInvalidRegister notification is sent." ::= { vRtrPimNgIfStatsEntry 35 } vRtrPimNgIfRxUnknownPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxUnknownPdus indicates the number of packets received with an unsupported PIM type." ::= { vRtrPimNgIfStatsEntry 36 } vRtrPimNgIfRxJoinPruneErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxJoinPruneErrs indicates the number of errors while processing Join-Prune messages received on this interface." ::= { vRtrPimNgIfStatsEntry 37 } vRtrPimNgIfRxBSMNoRouterAlertDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBSMNoRouterAlertDrops indicates the number of BSM messages that were dropped because router alert option was not present." ::= { vRtrPimNgIfStatsEntry 38 } vRtrPimNgIfRxBSMWrongIfDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxBSMWrongIfDrops indicates the number of BSM messages that were dropped either because they were not sent by the correct RPF neighbor or because they arrived on the wrong interface." ::= { vRtrPimNgIfStatsEntry 39 } vRtrPimNgIfMcacPolicyDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfMcacPolicyDrops indicates the number times a PIM Group is dropped because of applying a multicast CAC policy on this interface." ::= { vRtrPimNgIfStatsEntry 40 } vRtrPimNgIfTxIntraASAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxIntraASAD indicates the number of Intra AS AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 41 } vRtrPimNgIfRxIntraASAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxIntraASAD indicates the number of Intra AS AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 42 } vRtrPimNgIfRxIntraASADErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxIntraASADErrs indicates the number of errors while processing Intra AS AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 43 } vRtrPimNgIfTxInterASAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxInterASAD indicates the number of Inter AS AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 44 } vRtrPimNgIfRxInterASAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxInterASAD indicates the number of Inter AS AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 45 } vRtrPimNgIfRxInterASADErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxInterASADErrs indicates the number of errors while processing Inter AS AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 46 } vRtrPimNgIfTxSpmsiAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxSpmsiAD indicates the number of S-PMSI AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 47 } vRtrPimNgIfRxSpmsiAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSpmsiAD indicates the number of S-PMSI AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 48 } vRtrPimNgIfRxSpmsiADErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSpmsiADErrs indicates the number of errors while processing S-PMSI AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 49 } vRtrPimNgIfTxLeafAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxLeafAD indicates the number of Leaf AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 50 } vRtrPimNgIfRxLeafAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxLeafAD indicates the number of Leaf AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 51 } vRtrPimNgIfRxLeafADErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxLeafADErrs indicates the number of errors while processing Leaf AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 52 } vRtrPimNgIfTxSrcActAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxSrcActAD indicates the number of Source Active AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 53 } vRtrPimNgIfRxSrcActAD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSrcActAD indicates the number of Source Active AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 54 } vRtrPimNgIfTxSrcActADErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxSrcActADErrs indicates the number of errors while processing Source Active AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 55 } vRtrPimNgIfTxSharedTreeJoin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxSharedTreeJoin indicates the number of Shared Tree Joins transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 56 } vRtrPimNgIfRxSharedTreeJoin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSharedTreeJoin indicates the number of Shared Tree Joins received on this interface." ::= { vRtrPimNgIfStatsEntry 57 } vRtrPimNgIfRxSharedTreeJoinErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSharedTreeJoinErrs indicates the number of errors while processing Shared Tree Joins received on this interface." ::= { vRtrPimNgIfStatsEntry 58 } vRtrPimNgIfTxSrcTreeJoin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxSrcTreeJoin indicates the number of Source Tree Joins transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 59 } vRtrPimNgIfRxSrcTreeJoin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSrcTreeJoin indicates the number of Source Tree Joins received on this interface." ::= { vRtrPimNgIfStatsEntry 60 } vRtrPimNgIfRxSrcTreeJoinErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxSrcTreeJoinErrs indicates the number of errors while processing Source Tree Joins received on this interface." ::= { vRtrPimNgIfStatsEntry 61 } vRtrPimNgIfTxBgpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxBgpPkts indicates the number of BGP Packets transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 62 } vRtrPimNgIfRxBgpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxBgpPkts indicates the number of BGP Packets received on this interface." ::= { vRtrPimNgIfStatsEntry 63 } vRtrPimNgIfTxMdtSafi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxMdtSafi indicates the number of MDT-SAFI AD routes transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 64 } vRtrPimNgIfRxMdtSafi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxMdtSafi indicates the number of MDT-SAFI AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 65 } vRtrPimNgIfRxMdtSafiErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxMdtSafiErrs indicates the number of errors while processing MDT-SAFI AD routes received on this interface." ::= { vRtrPimNgIfStatsEntry 66 } vRtrPimNgIfRxAutoRpGenErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxAutoRpGenErrs indicates the number of errors while processing Auto-RP messages received on this interface." ::= { vRtrPimNgIfStatsEntry 67 } vRtrPimNgIfRxAutoRpAnnounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxAutoRpAnnounce indicates the number Auto-RP announcements received on this interface." ::= { vRtrPimNgIfStatsEntry 68 } vRtrPimNgIfTxAutoRpAnnounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxAutoRpAnnounce indicates the number of Auto-RP announcements transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 69 } vRtrPimNgIfRxAutoRpAnnounceErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxAutoRpAnnounceErrs indicates the number of errors while processing Auto-RP announcements received on this interface." ::= { vRtrPimNgIfStatsEntry 70 } vRtrPimNgIfTxAutoRpAnnounceErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxAutoRpAnnounceErrs indicates the number of errors while transmitting Auto-RP announcements on this interface." ::= { vRtrPimNgIfStatsEntry 71 } vRtrPimNgIfRxAutoRpMapping OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxAutoRpMapping indicates the number of Auto-RP mappings received on this interface." ::= { vRtrPimNgIfStatsEntry 72 } vRtrPimNgIfTxAutoRpMapping OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxAutoRpMapping indicates the number of Auto-RP mappings transmitted on this interface." ::= { vRtrPimNgIfStatsEntry 73 } vRtrPimNgIfRxAutoRpMappingErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfRxAutoRpMappingErrs indicates the number of errors while processing Auto-RP mappings received on this interface." ::= { vRtrPimNgIfStatsEntry 74 } vRtrPimNgIfTxAutoRpMappingErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrPimNgIfTxAutoRpMappingErrs indicates the number of errors while transmitting Auto-RP mappings on this interface." ::= { vRtrPimNgIfStatsEntry 75 } vRtrPimNgIfRxJoinPrunesMvpnRpfv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxJoinPrunesMvpnRpfv indicates the number of PIM Join Prune messages received on this interface which were propagated using RPF vectors for the MVPN." ::= { vRtrPimNgIfStatsEntry 76 } vRtrPimNgIfTxJoinPrunesMvpnRpfv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfTxJoinPrunesMvpnRpfv indicates the number of PIM Join Prune messages transmitted on this interface which were propagated using RPF vectors for the MVPN." ::= { vRtrPimNgIfStatsEntry 77 } vRtrPimNgIfRxInvalidJPMvpnRpfv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxInvalidJPMvpnRpfv indicates the number of invalid PIM Join Prune messages received on this interface which were propagated using RPF vectors for the MVPN." ::= { vRtrPimNgIfStatsEntry 78 } vRtrPimNgIfGraftsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsRx indicates the number of graft messages which were received on this interface." ::= { vRtrPimNgIfStatsEntry 79 } vRtrPimNgIfGraftsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsTx indicates the number of graft messages which were transmitted from this interface." ::= { vRtrPimNgIfStatsEntry 80 } vRtrPimNgIfGraftsRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsRxErrors indicates the number of invalid graft messages which were received on this interface." ::= { vRtrPimNgIfStatsEntry 81 } vRtrPimNgIfGraftsAckRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsAckRx indicates the number of graft acknowledgement messages which were received on this interface." ::= { vRtrPimNgIfStatsEntry 82 } vRtrPimNgIfGraftsAckTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsAckTx indicates the number of graft acknowledgement messages which were transmitted from this interface." ::= { vRtrPimNgIfStatsEntry 83 } vRtrPimNgIfGraftsAckRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGraftsAckRxErrors indicates the number of invalid graft acknowledgement messages which were received on this interface." ::= { vRtrPimNgIfStatsEntry 84 } vRtrPimNgIfRxAutoRpMappingRpfMM OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxAutoRpMappingRpfMM indicates the number of times an Auto-RP mapping message was received on this interface other than the RPF interface." ::= { vRtrPimNgIfStatsEntry 85 } vRtrPimNgIfRxAutoRpAnnounceRpfMM OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfRxAutoRpAnnounceRpfMM indicates the number of times an Auto-RP announcement message was received on this interface other than the RPF interface." ::= { vRtrPimNgIfStatsEntry 86 } vRtrPimNgDataMtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgDataMtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the Data Multicast Tunnel(MT) interfaces. An MT can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, an MT is a single multi-access interface. An MT interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the MT interface is automatically deleted. vRtrPimNgDataMtThd is present in another table vRtrPimNgDataMtThdTable." ::= { vRtrPimNgIfObjs 7 } vRtrPimNgDataMtEntry OBJECT-TYPE SYNTAX VRtrPimNgDataMtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgDataMtTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgDataMtMdSourceAddrType, vRtrPimNgDataMtMdSourceAddress, vRtrPimNgDataMtMdGroupAddrType, vRtrPimNgDataMtMdGroupAddress } ::= { vRtrPimNgDataMtTable 1 } VRtrPimNgDataMtEntry ::= SEQUENCE { vRtrPimNgDataMtMdSourceAddrType InetAddressType, vRtrPimNgDataMtMdSourceAddress InetAddress, vRtrPimNgDataMtMdGroupAddrType InetAddressType, vRtrPimNgDataMtMdGroupAddress InetAddress, vRtrPimNgDataMtIfIndex InterfaceIndex, vRtrPimNgDataMtUptime Unsigned32, vRtrPimNgDataMtNumVpnSGs Unsigned32, vRtrPimNgDataMtMultiStreamId Unsigned32 } vRtrPimNgDataMtMdSourceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtMdSourceAddrType indicates the address type of vRtrPimNgDataMtMdSourceAddress." ::= { vRtrPimNgDataMtEntry 1 } vRtrPimNgDataMtMdSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtMdSourceAddress indicates the source address for a Multicast Tunnel." ::= { vRtrPimNgDataMtEntry 2 } vRtrPimNgDataMtMdGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtMdGroupAddrType indicates the address type of vRtrPimNgDataMtMdGroupAddress." ::= { vRtrPimNgDataMtEntry 3 } vRtrPimNgDataMtMdGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtMdGroupAddress indicates the group address for a Multicast Tunnel." ::= { vRtrPimNgDataMtEntry 4 } vRtrPimNgDataMtIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtIfIndex indicates the interface index of the Multicast Data Tunnel(Data MT) interface. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgDataMtEntry 5 } vRtrPimNgDataMtUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtUptime indicates the time since this data Multicast Tunnel(MT) entry got created." ::= { vRtrPimNgDataMtEntry 6 } vRtrPimNgDataMtNumVpnSGs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtNumVpnSGs indicates the number of C-(S,G)'s mapped to this Multicast Tunnel(MT) interface." ::= { vRtrPimNgDataMtEntry 7 } vRtrPimNgDataMtMultiStreamId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtMultiStreamId indicates the stream Id of this multi stream SPMSI." ::= { vRtrPimNgDataMtEntry 8 } vRtrPimNgDataMtCGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgDataMtCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the C-(S,G) mapped to the Data Multicast Tunnel(MT). An entry in vRtrPimNgDataMtCGrpSrcTable is created whenever a C-(S,G) is mapped to a MT interface. An entry will be deleted automatically when the mapping between C-(S,G) and Data MT is removed." ::= { vRtrPimNgIfObjs 8 } vRtrPimNgDataMtCGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgDataMtCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgDataMtCGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgDataMtMdSourceAddrType, vRtrPimNgDataMtMdSourceAddress, vRtrPimNgDataMtMdGroupAddrType, vRtrPimNgDataMtMdGroupAddress, vRtrPimNgDataMtCGrpSrcGrpAdType, vRtrPimNgDataMtCGrpSrcGroupAddr, vRtrPimNgDataMtCGrpSrcSrcAdType, vRtrPimNgDataMtCGrpSrcSrcAddr } ::= { vRtrPimNgDataMtCGrpSrcTable 1 } VRtrPimNgDataMtCGrpSrcEntry ::= SEQUENCE { vRtrPimNgDataMtCGrpSrcGrpAdType InetAddressType, vRtrPimNgDataMtCGrpSrcGroupAddr InetAddress, vRtrPimNgDataMtCGrpSrcSrcAdType InetAddressType, vRtrPimNgDataMtCGrpSrcSrcAddr InetAddress, vRtrPimNgDataMtCGrpSrcState INTEGER, vRtrPimNgDataMtCGrpSrcJoinTimer Unsigned32, vRtrPimNgDataMtCGrpSrcHolddownTimer Unsigned32, vRtrPimNgDataMtCGrpSrcExpiryTimer Unsigned32, vRtrPimNgDataMtCGrpSrcUptime Unsigned32, vRtrPimNgDataMtCGrpSrcDataMtThreshold Unsigned32, vRtrPimNgDataMtCGrpSrcIfIndex InterfaceIndex } vRtrPimNgDataMtCGrpSrcGrpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcGrpAdType indicates the address type of vRtrPimNgDataMtCGrpSrcGroupAddr." ::= { vRtrPimNgDataMtCGrpSrcEntry 1 } vRtrPimNgDataMtCGrpSrcGroupAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcGroupAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN." ::= { vRtrPimNgDataMtCGrpSrcEntry 2 } vRtrPimNgDataMtCGrpSrcSrcAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcSrcAdType indicates the address type of vRtrPimNgDataMtCGrpSrcSrcAddr." ::= { vRtrPimNgDataMtCGrpSrcEntry 3 } vRtrPimNgDataMtCGrpSrcSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN." ::= { vRtrPimNgDataMtCGrpSrcEntry 4 } vRtrPimNgDataMtCGrpSrcState OBJECT-TYPE SYNTAX INTEGER { txJoinPending (0), txJoined (1), rxNotJoined (2), rxJoined (3), rxJoinedTracking (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcState indicates the state of this Multicast Tunnel(MT) (S,G). If the data-mdt is bound to a (C-S,G) on the ingress PE and if the PE has sent out a MDT Join TLV, the state will be txJoinPending. The state will change to txJoined when the (C-S,G) traffic is switched over to the new data mdt. If the data-mdt is not bound to a (C-S,G) on the egress PE, the state will be rxNotJoined. The state will be rxJoined if the (C-S,G) has bound to the data-mdt. Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD with no tunnel information." ::= { vRtrPimNgDataMtCGrpSrcEntry 5 } vRtrPimNgDataMtCGrpSrcJoinTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the Data Multicast Distribution Tree (MDT) group. After providing sufficient time for all PEs to join the data MDT the transmitting PE switches the given multicast stream to the Data MDT. The PE router connected to the source then starts encapsulating traffic using the Data MDT group." ::= { vRtrPimNgDataMtCGrpSrcEntry 6 } vRtrPimNgDataMtCGrpSrcHolddownTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcHolddownTimer indicates the time interval before which the PE router will switch back to the Default MDT tree after it started encapsulating packets using the Data MDT group. This is used to avoid oscillation when traffic is bursty." ::= { vRtrPimNgDataMtCGrpSrcEntry 7 } vRtrPimNgDataMtCGrpSrcExpiryTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcExpiryTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out Multicast Distribution Tree Join Tag Length Value (TLV) received and leave the data MDT group. This value must be consistent among PE routers." ::= { vRtrPimNgDataMtCGrpSrcEntry 8 } vRtrPimNgDataMtCGrpSrcUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcUptime indicates the time since this data Multicast Tunnel(MT) entry got created." ::= { vRtrPimNgDataMtCGrpSrcEntry 9 } vRtrPimNgDataMtCGrpSrcDataMtThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcDataMtThreshold indicates the threshold in kilobits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a Data Multicast Tunnel (MT) only if the C-(S,G)'s rate exceeds this configured threshold. " ::= { vRtrPimNgDataMtCGrpSrcEntry 10 } vRtrPimNgDataMtCGrpSrcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgDataMtCGrpSrcIfIndex indicates the interface index of the Multicast Data Tunnel(Data MT) interface. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgDataMtCGrpSrcEntry 11 } vRtrPimNgIfSecNbrTblLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfSecNbrTblLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfSecNbrTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { vRtrPimNgIfObjs 9 } vRtrPimNgIfSecNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfSecNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the secondary addresses advertised by PIM neighbor." ::= { vRtrPimNgIfObjs 10 } vRtrPimNgIfSecNbrEntry OBJECT-TYPE SYNTAX VRtrPimNgIfSecNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents each secondary address advertised by each of the router's PIM neighbors. The Address List Option advertises all the secondary addresses associated with the source interface of the router originating the HELLO message. Entries in this table cannot be created or deleted using SNMP." INDEX { vRtrID, vRtrIfIndex, vRtrPimNgIfNeighborAddressType, vRtrPimNgIfNeighborAddress, vRtrPimNgIfSecNbrAddrType, vRtrPimNgIfSecNbrAddress } ::= { vRtrPimNgIfSecNbrTable 1 } VRtrPimNgIfSecNbrEntry ::= SEQUENCE { vRtrPimNgIfSecNbrAddrType InetAddressType, vRtrPimNgIfSecNbrAddress InetAddress } vRtrPimNgIfSecNbrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfSecNbrAddrType indicates the type of IP address of the PIM secondary neighbor." ::= { vRtrPimNgIfSecNbrEntry 1 } vRtrPimNgIfSecNbrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfSecNbrAddress indicates the IP address of the PIM secondary neighbor." ::= { vRtrPimNgIfSecNbrEntry 2 } vRtrPimNgRsvpPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRsvpPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the RSVP Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted." ::= { vRtrPimNgIfObjs 11 } vRtrPimNgRsvpPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgRsvpPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgRsvpPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgRsvpPmsiExtTunlAdrType, vRtrPimNgRsvpPmsiExtTunnelAddr, vRtrPimNgRsvpPmsiTunnelId, vRtrPimNgRsvpPmsiP2MPId } ::= { vRtrPimNgRsvpPmsiTable 1 } VRtrPimNgRsvpPmsiEntry ::= SEQUENCE { vRtrPimNgRsvpPmsiExtTunlAdrType InetAddressType, vRtrPimNgRsvpPmsiExtTunnelAddr InetAddress, vRtrPimNgRsvpPmsiTunnelId Unsigned32, vRtrPimNgRsvpPmsiP2MPId Unsigned32, vRtrPimNgRsvpPmsiIfIndex InterfaceIndex, vRtrPimNgRsvpPmsiUptime Unsigned32, vRtrPimNgRsvpPmsiNumVpnSGs Unsigned32, vRtrPimNgRsvpPmsiIfType INTEGER, vRtrPimNgRsvpPmsiOperState TmnxOperState, vRtrPimNgRsvpPmsiMultiStreamId Unsigned32 } vRtrPimNgRsvpPmsiExtTunlAdrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiExtTunlAdrType indicates the address type of vRtrPimNgRsvpPmsiExtTunnelAddr." ::= { vRtrPimNgRsvpPmsiEntry 1 } vRtrPimNgRsvpPmsiExtTunnelAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiExtTunnelAddr indicates the extended Tunnel address for a PMSI." ::= { vRtrPimNgRsvpPmsiEntry 2 } vRtrPimNgRsvpPmsiTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiTunnelId indicates the Source RSVP Tunnel Identifier for a PMSI." ::= { vRtrPimNgRsvpPmsiEntry 3 } vRtrPimNgRsvpPmsiP2MPId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiP2MPId indicates the P2MP Identifier for a PMSI." ::= { vRtrPimNgRsvpPmsiEntry 4 } vRtrPimNgRsvpPmsiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiIfIndex indicates the interface index of the RSVP PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgRsvpPmsiEntry 5 } vRtrPimNgRsvpPmsiUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiUptime indicates the time since this RSVP PMSI entry got created." ::= { vRtrPimNgRsvpPmsiEntry 6 } vRtrPimNgRsvpPmsiNumVpnSGs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI." ::= { vRtrPimNgRsvpPmsiEntry 7 } vRtrPimNgRsvpPmsiIfType OBJECT-TYPE SYNTAX INTEGER { rx (0), tx (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiIfType indicates whether this PMSI interface is of type transmitter or receiver." ::= { vRtrPimNgRsvpPmsiEntry 8 } vRtrPimNgRsvpPmsiOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiOperState indicates the current operational state of this multi stream SPMSI." ::= { vRtrPimNgRsvpPmsiEntry 9 } vRtrPimNgRsvpPmsiMultiStreamId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpPmsiMultiStreamId indicates the stream Id of this multi stream SPMSI." ::= { vRtrPimNgRsvpPmsiEntry 10 } vRtrPimNgRsvpPmsiCGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRsvpPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the C-(S,G) mapped to the RSVP Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgRsvpPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and RSVP PMSI is removed." ::= { vRtrPimNgIfObjs 12 } vRtrPimNgRsvpPmsiCGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgRsvpPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgRsvpPmsiCGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgRsvpPmsiExtTunlAdrType, vRtrPimNgRsvpPmsiExtTunnelAddr, vRtrPimNgRsvpPmsiTunnelId, vRtrPimNgRsvpPmsiP2MPId, vRtrPimRsvpPmsiCGrpSrcGrpAdType, vRtrPimRsvpPmsiCGrpSrcGrpAddr, vRtrPimRsvpPmsiCGrpSrcSrcAdType, vRtrPimRsvpPmsiCGrpSrcSrcAddr } ::= { vRtrPimNgRsvpPmsiCGrpSrcTable 1 } VRtrPimNgRsvpPmsiCGrpSrcEntry ::= SEQUENCE { vRtrPimRsvpPmsiCGrpSrcGrpAdType InetAddressType, vRtrPimRsvpPmsiCGrpSrcGrpAddr InetAddress, vRtrPimRsvpPmsiCGrpSrcSrcAdType InetAddressType, vRtrPimRsvpPmsiCGrpSrcSrcAddr InetAddress, vRtrPimRsvpPmsiCGrpSrcState INTEGER, vRtrPimRsvpPmsiCGrpSrcJoinTimer Unsigned32, vRtrPimRsvpPmsiCGrpSrcHldDnTimer Unsigned32, vRtrPimRsvpPmsiCGrpSrcExpTimer Unsigned32, vRtrPimRsvpPmsiCGrpSrcUptime Unsigned32, vRtrPimDataMtCGrpSrcDataThresh Unsigned32, vRtrPimRsvpPmsiCGrpSrcIfIndex InterfaceIndex, vRtrPimRsvpPmsiCGrpSrcRxThresEn TruthValue, vRtrPimRsvpPmsiCGrpSrcRxCount Unsigned32 } vRtrPimRsvpPmsiCGrpSrcGrpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimRsvpPmsiCGrpSrcGrpAddr." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 1 } vRtrPimRsvpPmsiCGrpSrcGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 2 } vRtrPimRsvpPmsiCGrpSrcSrcAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimRsvpPmsiCGrpSrcSrcAddr." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 3 } vRtrPimRsvpPmsiCGrpSrcSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 4 } vRtrPimRsvpPmsiCGrpSrcState OBJECT-TYPE SYNTAX INTEGER { txJoinPending (0), txJoined (1), rxNotJoined (2), rxJoined (3), rxJoinedTracking (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a RSVP PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI. Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD with no tunnel information." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 5 } vRtrPimRsvpPmsiCGrpSrcJoinTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PEs to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 6 } vRtrPimRsvpPmsiCGrpSrcHldDnTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 7 } vRtrPimRsvpPmsiCGrpSrcExpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers to time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 8 } vRtrPimRsvpPmsiCGrpSrcUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcUptime indicates the time since this entry got created." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 9 } vRtrPimDataMtCGrpSrcDataThresh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimDataMtCGrpSrcDataThresh indicates the threshold in kilobits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold. " ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 10 } vRtrPimRsvpPmsiCGrpSrcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcIfIndex indicates the interface index of the RSVP S-PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 11 } vRtrPimRsvpPmsiCGrpSrcRxThresEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcRxThresEn indicates if receiver threshold is enabled for this s-pmsi. The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or vRtrPimNgDataMtSpmsiDelRxThd has a non default value." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 12 } vRtrPimRsvpPmsiCGrpSrcRxCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimRsvpPmsiCGrpSrcRxCount indicates the current receiver count for this s-pmsi. The value of this object is applicable only when the value of vRtrPimRsvpPmsiCGrpSrcRxThresEn is 'true'." ::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 13 } vRtrPimNgLdpPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgLdpPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the Ldp Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted." ::= { vRtrPimNgIfObjs 13 } vRtrPimNgLdpPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgLdpPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgLdpPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgLdpPmsiRootAddrType, vRtrPimNgLdpPmsiRootAddr, vRtrPimNgLdpPmsiLspId } ::= { vRtrPimNgLdpPmsiTable 1 } VRtrPimNgLdpPmsiEntry ::= SEQUENCE { vRtrPimNgLdpPmsiRootAddrType InetAddressType, vRtrPimNgLdpPmsiRootAddr InetAddress, vRtrPimNgLdpPmsiLspId Unsigned32, vRtrPimNgLdpPmsiIfIndex InterfaceIndex, vRtrPimNgLdpPmsiUptime Unsigned32, vRtrPimNgLdpPmsiNumVpnSGs Unsigned32, vRtrPimNgLdpPmsiIfType INTEGER, vRtrPimNgLdpPmsiOperState TmnxOperState, vRtrPimNgLdpPmsiMultiStreamId Unsigned32 } vRtrPimNgLdpPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiRootAddrType indicates the address type of vRtrPimNgLdpPmsiRootAddr." ::= { vRtrPimNgLdpPmsiEntry 1 } vRtrPimNgLdpPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiRootAddr indicates the extended tunnel address for a PMSI." ::= { vRtrPimNgLdpPmsiEntry 2 } vRtrPimNgLdpPmsiLspId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiLspId indicates the LSP Identifier for a PMSI." ::= { vRtrPimNgLdpPmsiEntry 3 } vRtrPimNgLdpPmsiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiIfIndex indicates the interface index of the Ldp PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgLdpPmsiEntry 4 } vRtrPimNgLdpPmsiUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiUptime indicates the time since the Ldp PMSI entry was created." ::= { vRtrPimNgLdpPmsiEntry 5 } vRtrPimNgLdpPmsiNumVpnSGs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI." ::= { vRtrPimNgLdpPmsiEntry 6 } vRtrPimNgLdpPmsiIfType OBJECT-TYPE SYNTAX INTEGER { rx (0), tx (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiIfType indicates whether this PMSI interface is of type transmitter or receiver." ::= { vRtrPimNgLdpPmsiEntry 7 } vRtrPimNgLdpPmsiOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiOperState indicates the current operational state of this multi stream SPMSI." ::= { vRtrPimNgLdpPmsiEntry 9 } vRtrPimNgLdpPmsiMultiStreamId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpPmsiMultiStreamId indicates the stream Id of this multi stream SPMSI." ::= { vRtrPimNgLdpPmsiEntry 10 } vRtrPimNgLdpPmsiCGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgLdpPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the C-(S,G) mapped to the Ldp Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgLdpPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and Ldp PMSI is removed." ::= { vRtrPimNgIfObjs 14 } vRtrPimNgLdpPmsiCGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgLdpPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgLdpPmsiCGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgLdpPmsiRootAddrType, vRtrPimNgLdpPmsiRootAddr, vRtrPimNgLdpPmsiLspId, vRtrPimLdpPmsiCGrpSrcGrpAdType, vRtrPimLdpPmsiCGrpSrcGrpAddr, vRtrPimLdpPmsiCGrpSrcSrcAdType, vRtrPimLdpPmsiCGrpSrcSrcAddr } ::= { vRtrPimNgLdpPmsiCGrpSrcTable 1 } VRtrPimNgLdpPmsiCGrpSrcEntry ::= SEQUENCE { vRtrPimLdpPmsiCGrpSrcGrpAdType InetAddressType, vRtrPimLdpPmsiCGrpSrcGrpAddr InetAddress, vRtrPimLdpPmsiCGrpSrcSrcAdType InetAddressType, vRtrPimLdpPmsiCGrpSrcSrcAddr InetAddress, vRtrPimLdpPmsiCGrpSrcState INTEGER, vRtrPimLdpPmsiCGrpSrcJoinTimer Unsigned32, vRtrPimLdpPmsiCGrpSrcHldDnTimer Unsigned32, vRtrPimLdpPmsiCGrpSrcExpTimer Unsigned32, vRtrPimLdpPmsiCGrpSrcUptime Unsigned32, vRtrPimLdpDataMtCGrpSrcDataThres Unsigned32, vRtrPimLdpPmsiCGrpSrcIfIndex InterfaceIndex, vRtrPimLdpPmsiCGrpSrcRxThresEnbl TruthValue, vRtrPimLdpPmsiCGrpSrcRxCount Unsigned32 } vRtrPimLdpPmsiCGrpSrcGrpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimLdpPmsiCGrpSrcGrpAddr." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 1 } vRtrPimLdpPmsiCGrpSrcGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 2 } vRtrPimLdpPmsiCGrpSrcSrcAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimLdpPmsiCGrpSrcSrcAddr." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 3 } vRtrPimLdpPmsiCGrpSrcSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 4 } vRtrPimLdpPmsiCGrpSrcState OBJECT-TYPE SYNTAX INTEGER { txJoinPending (0), txJoined (1), rxNotJoined (2), rxJoined (3), rxJoinedTracking (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a Ldp PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI. Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD with no tunnel information." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 5 } vRtrPimLdpPmsiCGrpSrcJoinTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PEs to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 6 } vRtrPimLdpPmsiCGrpSrcHldDnTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 7 } vRtrPimLdpPmsiCGrpSrcExpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 8 } vRtrPimLdpPmsiCGrpSrcUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcUptime indicates the time since the entry was created." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 9 } vRtrPimLdpDataMtCGrpSrcDataThres OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpDataMtCGrpSrcDataThres indicates the threshold in kilobits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 10 } vRtrPimLdpPmsiCGrpSrcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcIfIndex indicates the interface index of the Ldp S-PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 11 } vRtrPimLdpPmsiCGrpSrcRxThresEnbl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcRxThresEnbl indicates if receiver threshold is enabled for this s-pmsi. The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or vRtrPimNgDataMtSpmsiDelRxThd has a non default value." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 12 } vRtrPimLdpPmsiCGrpSrcRxCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimLdpPmsiCGrpSrcRxCount indicates the current receiver count for this s-pmsi. The value of this object is applicable only when the value of vRtrPimLdpPmsiCGrpSrcRxThresEnbl is 'true'." ::= { vRtrPimNgLdpPmsiCGrpSrcEntry 13 } vRtrPimNgRsvpIPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgRsvpIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the RSVP Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSIs are used for transmitting the MVPN's multicast data from one PE to others." ::= { vRtrPimNgIfObjs 15 } vRtrPimNgRsvpIPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgRsvpIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgRsvpIPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrPimNgRsvpIPmsiTable 1 } VRtrPimNgRsvpIPmsiEntry ::= SEQUENCE { vRtrPimNgRsvpIPmsiExtTunlAdrType InetAddressType, vRtrPimNgRsvpIPmsiExtTunnelAddr InetAddress, vRtrPimNgRsvpIPmsiLspName TNamedItem, vRtrPimNgRsvpIPmsiP2MPId Unsigned32, vRtrPimNgRsvpIPmsiTunnelId Unsigned32 } vRtrPimNgRsvpIPmsiExtTunlAdrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIPmsiExtTunlAdrType indicates the address type of vRtrPimNgRsvpIPmsiExtTunnelAddr." ::= { vRtrPimNgRsvpIPmsiEntry 1 } vRtrPimNgRsvpIPmsiExtTunnelAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIPmsiExtTunnelAddr indicates the extended tunnel address for this IPMSI." ::= { vRtrPimNgRsvpIPmsiEntry 2 } vRtrPimNgRsvpIPmsiLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIPmsiLspName indicates the the RSVP point to multipoint (P2MP) lsp name associated with this IPMSI. In case of terminating IPMSIs the value of vRtrPimNgRsvpIPmsiLspName indicates the name of the tunnel interface." ::= { vRtrPimNgRsvpIPmsiEntry 3 } vRtrPimNgRsvpIPmsiP2MPId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIPmsiP2MPId indicates the P2MP Identifier associated with this IPMSI." ::= { vRtrPimNgRsvpIPmsiEntry 4 } vRtrPimNgRsvpIPmsiTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgRsvpIPmsiTunnelId indicates the tunnel identifier associated with this IPMSI." ::= { vRtrPimNgRsvpIPmsiEntry 5 } vRtrPimNgLdpIPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgLdpIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the Ldp Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSIs are used for transmitting the MVPN's multicast data from one PE to others." ::= { vRtrPimNgIfObjs 16 } vRtrPimNgLdpIPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgLdpIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgLdpIPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrPimNgLdpIPmsiTable 1 } VRtrPimNgLdpIPmsiEntry ::= SEQUENCE { vRtrPimNgLdpIPmsiRootAddrType InetAddressType, vRtrPimNgLdpIPmsiRootAddr InetAddress, vRtrPimNgLdpIPmsiLspId Unsigned32, vRtrPimNgLdpIPmsiLspName TNamedItem } vRtrPimNgLdpIPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpIPmsiRootAddrType indicates the address type of vRtrPimNgLdpIPmsiRootAddr." ::= { vRtrPimNgLdpIPmsiEntry 1 } vRtrPimNgLdpIPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpIPmsiRootAddr indicates the root address for the IPMSI." ::= { vRtrPimNgLdpIPmsiEntry 2 } vRtrPimNgLdpIPmsiLspId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpIPmsiLspId indicates the lsp identifier associated with the IPMSI." ::= { vRtrPimNgLdpIPmsiEntry 3 } vRtrPimNgLdpIPmsiLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgLdpIPmsiLspName indicates the lsp name associated with the IPMSI. In case of terminating IPMSIs the value of vRtrPimNgLdpIPmsiLspName indicates the name of the tunnel interface." ::= { vRtrPimNgLdpIPmsiEntry 4 } vRtrPimNgMvpnExtranetTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgMvpnExtranetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the global MVPN Extranet database. It consists of source MVPN, receiver MVPN and the route to the source." ::= { vRtrPimNgIfObjs 17 } vRtrPimNgMvpnExtranetEntry OBJECT-TYPE SYNTAX VRtrPimNgMvpnExtranetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgMvpnExtranetTable represents a pairing of source and receiver MVPN using a particular route. This is a read-only table." INDEX { vRtrPimNgMvpnExtranetNHAddrType, vRtrPimNgMvpnExtranetNHAddr, vRtrPimNgMvpnExtranetRD, vRtrPimNgMvpnExtranetSrcMvpn, vRtrPimNgMvpnExtranetRecvMvpn } ::= { vRtrPimNgMvpnExtranetTable 1 } VRtrPimNgMvpnExtranetEntry ::= SEQUENCE { vRtrPimNgMvpnExtranetNHAddrType InetAddressType, vRtrPimNgMvpnExtranetNHAddr InetAddress, vRtrPimNgMvpnExtranetRD TmnxVPNRouteDistinguisher, vRtrPimNgMvpnExtranetSrcMvpn Unsigned32, vRtrPimNgMvpnExtranetRecvMvpn Unsigned32, vRtrPimNgMvpnExtranetRecvRefCnt Unsigned32 } vRtrPimNgMvpnExtranetNHAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetNHAddrType indicates the address type of vRtrPimNgMvpnExtranetNHAddr." ::= { vRtrPimNgMvpnExtranetEntry 1 } vRtrPimNgMvpnExtranetNHAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetNHAddr indicates the next hop address in order to reach the MVPN where the source is present." ::= { vRtrPimNgMvpnExtranetEntry 2 } vRtrPimNgMvpnExtranetRD OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetRD indicates the Route Distinguisher used to reach the MVPN where source is present." ::= { vRtrPimNgMvpnExtranetEntry 3 } vRtrPimNgMvpnExtranetSrcMvpn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetSrcMvpn indicates the source MVPN id." ::= { vRtrPimNgMvpnExtranetEntry 4 } vRtrPimNgMvpnExtranetRecvMvpn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetRecvMvpn indicates the receiver MVPN id." ::= { vRtrPimNgMvpnExtranetEntry 5 } vRtrPimNgMvpnExtranetRecvRefCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgMvpnExtranetRecvRefCnt indicates the number of receivers in the receiver MVPN which expect to receive Extranet traffic from this vRtrPimNgMvpnExtranetSrcMvpn." ::= { vRtrPimNgMvpnExtranetEntry 6 } vRtrPimNgIfGrpSrcRpfvTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgIfGrpSrcRpfvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast sources corresponding to the IP multicast groups along with the RPF vector neighbours." ::= { vRtrPimNgIfObjs 18 } vRtrPimNgIfGrpSrcRpfvEntry OBJECT-TYPE SYNTAX VRtrPimNgIfGrpSrcRpfvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry in the vRtrPimNgIfGrpSrcRpfvEntry. Each entry represents a source address from which receivers are interested or not interested in receiving multicast traffic along with the information about the RPF vector neighbours." INDEX { vRtrID, vRtrIfIndex, vRtrPimNgIfGrpSrcRpfvSGType, vRtrPimNgIfGrpSrcRpfvGrpAddrType, vRtrPimNgIfGrpSrcRpfvGrpAddress, vRtrPimNgIfGrpSrcRpfvSrcAddrType, vRtrPimNgIfGrpSrcRpfvSrcAddress, vRtrPimNgIfGrpSrcRpfvNbrAddrType, vRtrPimNgIfGrpSrcRpfvNbrAddress } ::= { vRtrPimNgIfGrpSrcRpfvTable 1 } VRtrPimNgIfGrpSrcRpfvEntry ::= SEQUENCE { vRtrPimNgIfGrpSrcRpfvSGType INTEGER, vRtrPimNgIfGrpSrcRpfvGrpAddrType InetAddressType, vRtrPimNgIfGrpSrcRpfvGrpAddress InetAddress, vRtrPimNgIfGrpSrcRpfvSrcAddrType InetAddressType, vRtrPimNgIfGrpSrcRpfvSrcAddress InetAddress, vRtrPimNgIfGrpSrcRpfvNbrAddrType InetAddressType, vRtrPimNgIfGrpSrcRpfvNbrAddress InetAddress, vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp InetAddressType, vRtrPimNgIfGrpSrcRpfvProxyAddr InetAddress, vRtrPimNgIfGrpSrcRpfvRD TmnxVPNRouteDistinguisher, vRtrPimNgIfGrpSrcRpfvType INTEGER, vRtrPimNgIfGrpSrcRpfvIfWinner TruthValue, vRtrPimNgIfGrpSrcRpfvNbrWinner TruthValue } vRtrPimNgIfGrpSrcRpfvSGType OBJECT-TYPE SYNTAX INTEGER { starStarRP (0), starG (1), sg (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvSGType indicates the type of this entry for this table." ::= { vRtrPimNgIfGrpSrcRpfvEntry 1 } vRtrPimNgIfGrpSrcRpfvGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvGrpAddrType indicates the type of IP multicast group address represented by vRtrPimNgIfGrpSrcRpfvGrpAddress." ::= { vRtrPimNgIfGrpSrcRpfvEntry 2 } vRtrPimNgIfGrpSrcRpfvGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvGrpAddress indicates the IP multicast group address for which this entry contains information." ::= { vRtrPimNgIfGrpSrcRpfvEntry 3 } vRtrPimNgIfGrpSrcRpfvSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvSrcAddrType indicates the type of IP multicast source address represented by vRtrPimNgIfGrpSrcRpfvSrcAddrType." ::= { vRtrPimNgIfGrpSrcRpfvEntry 4 } vRtrPimNgIfGrpSrcRpfvSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvSrcAddress indicates the source address for which this entry contains information." ::= { vRtrPimNgIfGrpSrcRpfvEntry 5 } vRtrPimNgIfGrpSrcRpfvNbrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvNbrAddrType indicates the type of address of the RPF vector neighbor represented by vRtrPimNgIfGrpSrcRpfvNbrAddress." ::= { vRtrPimNgIfGrpSrcRpfvEntry 6 } vRtrPimNgIfGrpSrcRpfvNbrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvNbrAddress indicates the address of the the RPF vector neighbor." ::= { vRtrPimNgIfGrpSrcRpfvEntry 7 } vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp indicates the type of address of the RPF vector proxy represented by vRtrPimNgIfGrpSrcRpfvProxyAddr." ::= { vRtrPimNgIfGrpSrcRpfvEntry 8 } vRtrPimNgIfGrpSrcRpfvProxyAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvProxyAddr indicates the address of the RPF vector proxy." ::= { vRtrPimNgIfGrpSrcRpfvEntry 9 } vRtrPimNgIfGrpSrcRpfvRD OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvRD indicates the RPF vector Route Distinguisher." ::= { vRtrPimNgIfGrpSrcRpfvEntry 10 } vRtrPimNgIfGrpSrcRpfvType OBJECT-TYPE SYNTAX INTEGER { none (0), mvpn (1), core (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvType indicates the RPF vector type." ::= { vRtrPimNgIfGrpSrcRpfvEntry 11 } vRtrPimNgIfGrpSrcRpfvIfWinner OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvIfWinner indicates whether this interface is the rpf-vector winner amongst all the downstream interfaces for the (S,G) specified by vRtrPimNgIfGrpSrcRpfvGrpAddress and vRtrPimNgIfGrpSrcRpfvSrcAddress." ::= { vRtrPimNgIfGrpSrcRpfvEntry 12 } vRtrPimNgIfGrpSrcRpfvNbrWinner OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgIfGrpSrcRpfvNbrWinner indicates whether this neighbor is the rpf-vector winner amongst all neighbors on the interface specified by vRtrIfIndex for the (S,G) specified by vRtrPimNgIfGrpSrcRpfvGrpAddress and vRtrPimNgIfGrpSrcRpfvSrcAddress." ::= { vRtrPimNgIfGrpSrcRpfvEntry 13 } vRtrPimNgBierPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgBierPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the BIER Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted." ::= { vRtrPimNgIfObjs 19 } vRtrPimNgBierPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgBierPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgBierPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgBierPmsiRootAddrType, vRtrPimNgBierPmsiRootAddr, vRtrPimNgBierPmsiSubDomainId, vRtrPimNgBierBfrId, vRtrPimNgBierPmsiMplsLabel } ::= { vRtrPimNgBierPmsiTable 1 } VRtrPimNgBierPmsiEntry ::= SEQUENCE { vRtrPimNgBierPmsiRootAddrType InetAddressType, vRtrPimNgBierPmsiRootAddr InetAddress, vRtrPimNgBierPmsiSubDomainId Unsigned32, vRtrPimNgBierBfrId Unsigned32, vRtrPimNgBierPmsiMplsLabel Unsigned32, vRtrPimNgBierPmsiIfIndex InterfaceIndex, vRtrPimNgBierPmsiUptime Unsigned32, vRtrPimNgBierPmsiNumVpnSGs Unsigned32, vRtrPimNgBierPmsiIfType INTEGER, vRtrPimNgBierPmsiOperState TmnxOperState, vRtrPimNgBierPmsiMultiStreamId Unsigned32 } vRtrPimNgBierPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiRootAddrType indicates the address type of vRtrPimNgBierPmsiRootAddr." ::= { vRtrPimNgBierPmsiEntry 1 } vRtrPimNgBierPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiRootAddr indicates the tunnel root address of the PMSI." ::= { vRtrPimNgBierPmsiEntry 2 } vRtrPimNgBierPmsiSubDomainId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiSubDomainId indicates the BIER sub-domain ID." ::= { vRtrPimNgBierPmsiEntry 3 } vRtrPimNgBierBfrId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierBfrId indicates the BFR ID." ::= { vRtrPimNgBierPmsiEntry 4 } vRtrPimNgBierPmsiMplsLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiMplsLabel indicates the MPLS service Label for the PMSI." ::= { vRtrPimNgBierPmsiEntry 5 } vRtrPimNgBierPmsiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiIfIndex indicates the interface index of the BIER PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgBierPmsiEntry 6 } vRtrPimNgBierPmsiUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiUptime indicates the time since this BIER PMSI entry got created." ::= { vRtrPimNgBierPmsiEntry 7 } vRtrPimNgBierPmsiNumVpnSGs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI." ::= { vRtrPimNgBierPmsiEntry 8 } vRtrPimNgBierPmsiIfType OBJECT-TYPE SYNTAX INTEGER { rx (0), tx (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiIfType indicates whether this PMSI interface is of type transmitter or receiver." ::= { vRtrPimNgBierPmsiEntry 9 } vRtrPimNgBierPmsiOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiOperState indicates the current operational state of this multi stream SPMSI." ::= { vRtrPimNgBierPmsiEntry 10 } vRtrPimNgBierPmsiMultiStreamId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiMultiStreamId indicates the stream Id of this multi stream SPMSI." ::= { vRtrPimNgBierPmsiEntry 11 } vRtrPimNgBierPmsiCGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgBierPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the C-(S,G) mapped to the BIER Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgBierPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and Bier PMSI is removed." ::= { vRtrPimNgIfObjs 20 } vRtrPimNgBierPmsiCGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgBierPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgBierPmsiCGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgBierPmsiRootAddrType, vRtrPimNgBierPmsiRootAddr, vRtrPimNgBierPmsiSubDomainId, vRtrPimNgBierPmsiMplsLbl, vRtrPimNgBierBfrId, vRtrPimBierPmsiCGrpSrcGrpAdType, vRtrPimBierPmsiCGrpSrcGrpAddr, vRtrPimBierPmsiCGrpSrcSrcAdType, vRtrPimBierPmsiCGrpSrcSrcAddr } ::= { vRtrPimNgBierPmsiCGrpSrcTable 1 } VRtrPimNgBierPmsiCGrpSrcEntry ::= SEQUENCE { vRtrPimNgBierPmsiMplsLbl Unsigned32, vRtrPimBierPmsiCGrpSrcGrpAdType InetAddressType, vRtrPimBierPmsiCGrpSrcGrpAddr InetAddress, vRtrPimBierPmsiCGrpSrcSrcAdType InetAddressType, vRtrPimBierPmsiCGrpSrcSrcAddr InetAddress, vRtrPimBierPmsiCGrpSrcState INTEGER, vRtrPimBierPmsiCGrpSrcJoinTimer Unsigned32, vRtrPimBierPmsiCGrpSrcHldDnTimer Unsigned32, vRtrPimBierPmsiCGrpSrcExpTimer Unsigned32, vRtrPimBierPmsiCGrpSrcUptime Unsigned32, vRtrPimBierDataMtCGrpSrcDataTh Unsigned32, vRtrPimBierPmsiCGrpSrcIfIndex InterfaceIndex, vRtrPimBierPmsiCGrpSrcRxThEnbl TruthValue, vRtrPimBierPmsiCGrpSrcRxCount Unsigned32 } vRtrPimNgBierPmsiMplsLbl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgBierPmsiMplsLbl indicates the MPLS service label for the PMSI." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 1 } vRtrPimBierPmsiCGrpSrcGrpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimBierPmsiCGrpSrcGrpAddr." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 2 } vRtrPimBierPmsiCGrpSrcGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 3 } vRtrPimBierPmsiCGrpSrcSrcAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimBierPmsiCGrpSrcSrcAddr." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 4 } vRtrPimBierPmsiCGrpSrcSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 5 } vRtrPimBierPmsiCGrpSrcState OBJECT-TYPE SYNTAX INTEGER { txJoinPending (0), txJoined (1), rxNotJoined (2), rxJoined (3), rxJoinedTracking (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a BIER PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI. Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD with no tunnel information." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 6 } vRtrPimBierPmsiCGrpSrcJoinTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PEs to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 7 } vRtrPimBierPmsiCGrpSrcHldDnTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 8 } vRtrPimBierPmsiCGrpSrcExpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 9 } vRtrPimBierPmsiCGrpSrcUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcUptime indicates the time since the entry was created." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 10 } vRtrPimBierDataMtCGrpSrcDataTh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierDataMtCGrpSrcDataTh indicates the threshold in kilobits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 11 } vRtrPimBierPmsiCGrpSrcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcIfIndex indicates the interface index of the BIER S-PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 12 } vRtrPimBierPmsiCGrpSrcRxThEnbl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcRxThEnbl indicates if receiver threshold is enabled for this s-pmsi. The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or vRtrPimNgDataMtSpmsiDelRxThd has a non default value." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 13 } vRtrPimBierPmsiCGrpSrcRxCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimBierPmsiCGrpSrcRxCount indicates the current receiver count for this s-pmsi. The value of this object is applicable only when the value of vRtrPimBierPmsiCGrpSrcRxThEnbl is 'true'." ::= { vRtrPimNgBierPmsiCGrpSrcEntry 14 } vRtrPimNgBierIPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgBierIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the Bier Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSIs are used for transmitting the MVPN's multicast data from one PE to others." ::= { vRtrPimNgIfObjs 21 } vRtrPimNgBierIPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgBierIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgBierIPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrPimNgBierIPmsiTable 1 } VRtrPimNgBierIPmsiEntry ::= SEQUENCE { vRtrPimNgBierIPmsiRootAddrType InetAddressType, vRtrPimNgBierIPmsiRootAddr InetAddress, vRtrPimNgBierIPmsiSubDomainId Unsigned32, vRtrPimNgBierIPmsiMplsLbl Unsigned32, vRtrPimNgBierIPmsiBfrId Unsigned32 } vRtrPimNgBierIPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierIPmsiRootAddrType indicates the address type of vRtrPimNgBierIPmsiRootAddr." ::= { vRtrPimNgBierIPmsiEntry 1 } vRtrPimNgBierIPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierIPmsiRootAddr indicates the tunnel root address of the IPMSI." ::= { vRtrPimNgBierIPmsiEntry 2 } vRtrPimNgBierIPmsiSubDomainId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierIPmsiSubDomainId indicates the BIER sub-domain ID." ::= { vRtrPimNgBierIPmsiEntry 3 } vRtrPimNgBierIPmsiMplsLbl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierIPmsiMplsLbl indicates the MPLS service label for the IPMSI." ::= { vRtrPimNgBierIPmsiEntry 4 } vRtrPimNgBierIPmsiBfrId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgBierIPmsiBfrId indicates the BFR ID." ::= { vRtrPimNgBierIPmsiEntry 5 } vRtrPimNgTSidPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgTSidPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the Tree SID Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted." ::= { vRtrPimNgIfObjs 22 } vRtrPimNgTSidPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgTSidPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgTSidPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgTSidPmsiRootAddrType, vRtrPimNgTSidPmsiRootAddr, vRtrPimNgTSidPmsiTreeIdx } ::= { vRtrPimNgTSidPmsiTable 1 } VRtrPimNgTSidPmsiEntry ::= SEQUENCE { vRtrPimNgTSidPmsiRootAddrType InetAddressType, vRtrPimNgTSidPmsiRootAddr InetAddress, vRtrPimNgTSidPmsiTreeIdx Unsigned32, vRtrPimNgTSidPmsiIfIndex InterfaceIndex, vRtrPimNgTSidPmsiUptime Unsigned32, vRtrPimNgTSidPmsiNumVpnSGs Unsigned32, vRtrPimNgTSidPmsiIfType INTEGER, vRtrPimNgTSidPmsiOperState TmnxOperState, vRtrPimNgTSidPmsiMultiStreamId Unsigned32 } vRtrPimNgTSidPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiRootAddrType indicates the address type of vRtrPimNgTSidPmsiRootAddr." ::= { vRtrPimNgTSidPmsiEntry 1 } vRtrPimNgTSidPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiRootAddr indicates the extended tunnel address for a PMSI." ::= { vRtrPimNgTSidPmsiEntry 2 } vRtrPimNgTSidPmsiTreeIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiTreeIdx indicates the LSP Identifier for a PMSI." ::= { vRtrPimNgTSidPmsiEntry 3 } vRtrPimNgTSidPmsiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiIfIndex indicates the interface index of the TSid PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgTSidPmsiEntry 4 } vRtrPimNgTSidPmsiUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiUptime indicates the time since the TSid PMSI entry was created." ::= { vRtrPimNgTSidPmsiEntry 5 } vRtrPimNgTSidPmsiNumVpnSGs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI." ::= { vRtrPimNgTSidPmsiEntry 6 } vRtrPimNgTSidPmsiIfType OBJECT-TYPE SYNTAX INTEGER { rx (0), tx (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiIfType indicates whether this PMSI interface is of type transmitter or receiver." ::= { vRtrPimNgTSidPmsiEntry 7 } vRtrPimNgTSidPmsiOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiOperState indicates the current operational state of this multi stream SPMSI." ::= { vRtrPimNgTSidPmsiEntry 9 } vRtrPimNgTSidPmsiMultiStreamId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidPmsiMultiStreamId indicates the stream Id of this multi stream SPMSI." ::= { vRtrPimNgTSidPmsiEntry 10 } vRtrPimNgTSidPmsiCGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgTSidPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the C-(S,G) mapped to the TSid Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgTSidPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and TSid PMSI is removed." ::= { vRtrPimNgIfObjs 23 } vRtrPimNgTSidPmsiCGrpSrcEntry OBJECT-TYPE SYNTAX VRtrPimNgTSidPmsiCGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgTSidPmsiCGrpSrcTable. This is a read-only table." INDEX { vRtrID, vRtrPimNgTSidPmsiRootAddrType, vRtrPimNgTSidPmsiRootAddr, vRtrPimNgTSidPmsiTreeIdx, vRtrPimTSidPmsiCGrpSrcGrpAdType, vRtrPimTSidPmsiCGrpSrcGrpAddr, vRtrPimTSidPmsiCGrpSrcSrcAdType, vRtrPimTSidPmsiCGrpSrcSrcAddr } ::= { vRtrPimNgTSidPmsiCGrpSrcTable 1 } VRtrPimNgTSidPmsiCGrpSrcEntry ::= SEQUENCE { vRtrPimTSidPmsiCGrpSrcGrpAdType InetAddressType, vRtrPimTSidPmsiCGrpSrcGrpAddr InetAddress, vRtrPimTSidPmsiCGrpSrcSrcAdType InetAddressType, vRtrPimTSidPmsiCGrpSrcSrcAddr InetAddress, vRtrPimTSidPmsiCGrpSrcState INTEGER, vRtrPimTSidPmsiCGrpSrcJoinTimer Unsigned32, vRtrPimTSidPmsiCGrpSrcHldDnTimer Unsigned32, vRtrPimTSidPmsiCGrpSrcExpTimer Unsigned32, vRtrPimTSidPmsiCGrpSrcUptime Unsigned32, vRtrPimTSidDataMtCGrpSrcDataTh Unsigned32, vRtrPimTSidPmsiCGrpSrcIfIndex InterfaceIndex, vRtrPimTSidPmsiCGrpSrcRxThEnbl TruthValue, vRtrPimTSidPmsiCGrpSrcRxCount Unsigned32 } vRtrPimTSidPmsiCGrpSrcGrpAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimTSidPmsiCGrpSrcGrpAddr." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 1 } vRtrPimTSidPmsiCGrpSrcGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 2 } vRtrPimTSidPmsiCGrpSrcSrcAdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimTSidPmsiCGrpSrcSrcAddr." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 3 } vRtrPimTSidPmsiCGrpSrcSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 4 } vRtrPimTSidPmsiCGrpSrcState OBJECT-TYPE SYNTAX INTEGER { txJoinPending (0), txJoined (1), rxNotJoined (2), rxJoined (3), rxJoinedTracking (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a TSid PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI. Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD with no tunnel information." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 5 } vRtrPimTSidPmsiCGrpSrcJoinTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PEs to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 6 } vRtrPimTSidPmsiCGrpSrcHldDnTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 7 } vRtrPimTSidPmsiCGrpSrcExpTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 8 } vRtrPimTSidPmsiCGrpSrcUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcUptime indicates the time since the entry was created." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 9 } vRtrPimTSidDataMtCGrpSrcDataTh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidDataMtCGrpSrcDataTh indicates the threshold in kilobits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 10 } vRtrPimTSidPmsiCGrpSrcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcIfIndex indicates the interface index of the TSid S-PMSI. This value will be non-zero integer value specific to the router." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 11 } vRtrPimTSidPmsiCGrpSrcRxThEnbl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcRxThEnbl indicates if receiver threshold is enabled for this s-pmsi. The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or vRtrPimNgDataMtSpmsiDelRxThd has a non default value." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 12 } vRtrPimTSidPmsiCGrpSrcRxCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimTSidPmsiCGrpSrcRxCount indicates the current receiver count for this s-pmsi. The value of this object is applicable only when the value of vRtrPimTSidPmsiCGrpSrcRxThEnbl is 'true'." ::= { vRtrPimNgTSidPmsiCGrpSrcEntry 13 } vRtrPimNgTSidIPmsiTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPimNgTSidIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the TSid Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSIs are used for transmitting the MVPN's multicast data from one PE to others." ::= { vRtrPimNgIfObjs 24 } vRtrPimNgTSidIPmsiEntry OBJECT-TYPE SYNTAX VRtrPimNgTSidIPmsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrPimNgTSidIPmsiTable. This is a read-only table." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrPimNgTSidIPmsiTable 1 } VRtrPimNgTSidIPmsiEntry ::= SEQUENCE { vRtrPimNgTSidIPmsiRootAddrType InetAddressType, vRtrPimNgTSidIPmsiRootAddr InetAddress, vRtrPimNgTSidIPmsiTreeIdx Unsigned32, vRtrPimNgTSidIPmsiLspName TNamedItem } vRtrPimNgTSidIPmsiRootAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidIPmsiRootAddrType indicates the address type of vRtrPimNgTSidIPmsiRootAddr." ::= { vRtrPimNgTSidIPmsiEntry 1 } vRtrPimNgTSidIPmsiRootAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidIPmsiRootAddr indicates the root address for the IPMSI." ::= { vRtrPimNgTSidIPmsiEntry 2 } vRtrPimNgTSidIPmsiTreeIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidIPmsiTreeIdx indicates the lsp identifier associated with the IPMSI." ::= { vRtrPimNgTSidIPmsiEntry 3 } vRtrPimNgTSidIPmsiLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgTSidIPmsiLspName indicates the lsp name associated with the IPMSI. In case of terminating IPMSIs the value of vRtrPimNgTSidIPmsiLspName indicates the name of the tunnel interface." ::= { vRtrPimNgTSidIPmsiEntry 4 } vRtrPimNgNotificationObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 3 } vRtrPimNgNotifySourceIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifySourceIpType indicates the type of the address from which the PIM message originated." ::= { vRtrPimNgNotificationObjs 1 } vRtrPimNgNotifySourceIp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifySourceIp indicates the address from which the PIM message originated." ::= { vRtrPimNgNotificationObjs 2 } vRtrPimNgNotifyGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyGroupAddrType indicates the type of the group address in the PIM message." ::= { vRtrPimNgNotificationObjs 3 } vRtrPimNgNotifyGroupAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyGroupAddr indicates the group address in the PIM message." ::= { vRtrPimNgNotificationObjs 4 } vRtrPimNgNotifyRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyRPAddrType indicates the type of the RP address on the router corresponding to the group address in the PIM message." ::= { vRtrPimNgNotificationObjs 5 } vRtrPimNgNotifyRPAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyRPAddr indicates the RP address on the router corresponding to the group address in the PIM message." ::= { vRtrPimNgNotificationObjs 6 } vRtrPimNgNotifyWrongRPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyWrongRPAddrType indicates the type of the RP address in the PIM message corresponding to the group address in the message." ::= { vRtrPimNgNotificationObjs 7 } vRtrPimNgNotifyWrongRPAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyWrongRPAddr indicates the RP address in the PIM message corresponding to the group address in the message. Whenever there is an disagreement between the RP address on the router and the RP address in the PIM message, this object is used by the notifications to send the RP address in the PIM message." ::= { vRtrPimNgNotificationObjs 8 } vRtrPimNgNotifyMsgType OBJECT-TYPE SYNTAX INTEGER { hello (0), register (1), registerStop (2), joinPrune (3), bootstrap (4), assert (5), graft (6), graftAck (7), crpAdv (8), igmpLocalMembership (9) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyMsgType indicates the types of PIM message. This object is used by vRtrPimNgGrpInSSMRange notification to identify the type of PIM message." ::= { vRtrPimNgNotificationObjs 9 } vRtrPimNgWrongMdtDefGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongMdtDefGrpAddrType indicates the type of address represented by vRtrPimNgWrongMdtDefGrpAddr." ::= { vRtrPimNgNotificationObjs 10 } vRtrPimNgWrongMdtDefGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongMdtDefGrpAddr indicates the default core group address of the Multicast Distribution Tree(MDT) in the PIM message. Whenever there is a disagreement between the default core group address on the router and the default core group address in the PIM message, this object is used by the notifications to send the default core group address in the the PIM message." ::= { vRtrPimNgNotificationObjs 11 } vRtrPimNgWrongPmsiType OBJECT-TYPE SYNTAX INTEGER { pimSsm (0), pimSm (1), rsvp (2), ldp (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiType indicates the type of tunnel received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the tunnel type received in the PIM message." ::= { vRtrPimNgNotificationObjs 12 } vRtrPimNgWrongPmsiP2mpId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiP2mpId indicates the P2MP Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier received in the PIM message." ::= { vRtrPimNgNotificationObjs 13 } vRtrPimNgWrongPmsiTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiTunnelId indicates the Source RSVP Tunnel Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the Tunnel Identifier received in the PIM message." ::= { vRtrPimNgNotificationObjs 14 } vRtrPimNgWrongPmsiExtTunlAdrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiExtTunlAdrTyp indicates the address type of vRtrPimNgWrongPmsiExtTunlAddr." ::= { vRtrPimNgNotificationObjs 15 } vRtrPimNgWrongPmsiExtTunlAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiExtTunlAddr indicates the Extended Tunnel address for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the Extended Tunnel address received in the PIM message." ::= { vRtrPimNgNotificationObjs 16 } vRtrPimNgWrongVprnId OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongVprnId indicates the VPRN of the PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the VPRN of the received PIM message." ::= { vRtrPimNgNotificationObjs 17 } vRtrPimNgWrongPmsiLdpLspId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiLdpLspId indicates the LSP Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier received in the PIM message." ::= { vRtrPimNgNotificationObjs 18 } vRtrPimNgWrongPmsiSenderAdrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiSenderAdrTyp indicates the address type of vRtrPimNgWrongPmsiSenderAddr." ::= { vRtrPimNgNotificationObjs 19 } vRtrPimNgWrongPmsiSenderAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgWrongPmsiSenderAddr indicates the extended tunnel address for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the sender address received in the PIM message." ::= { vRtrPimNgNotificationObjs 20 } vRtrPimNgNotifySourceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifySourceAddrType indicates the type of the source address in the PIM message." ::= { vRtrPimNgNotificationObjs 21 } vRtrPimNgNotifySourceAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrPimNgNotifySourceAddr indicates an IP multicast source address." ::= { vRtrPimNgNotificationObjs 22 } vRtrPimNgNotifyDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object vRtrPimNgNotifyDescription is a printable character string." ::= { vRtrPimNgNotificationObjs 23 } vRtrPimNgNumGraftRetriesExcd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object vRtrPimNgNumGraftRetriesExcd indicates the number of graft retries after which graft retry was aborted." ::= { vRtrPimNgNotificationObjs 24 } vRtrPimNgNotifyBierInbInvSDId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyBierInbInvSDId indicates the unsupported sub-domain id received in bier inband PDU and the Join/Prune PDU is dropped." ::= { vRtrPimNgNotificationObjs 25 } vRtrPimNgNotifyBierInbInvBfrId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyBierInbInvBfrId indicates the unsupported bfr id is received in bier inband PDU and the Join/Prune PDU is dropped." ::= { vRtrPimNgNotificationObjs 26 } vRtrPimNgNotifyBierInbSAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyBierInbSAddrTyp ndicates the type of the source address in the PIM message." ::= { vRtrPimNgNotificationObjs 27 } vRtrPimNgNotifyBierInbSAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrPimNgNotifyBierInbSAddr indicates an IP multicast source address." ::= { vRtrPimNgNotificationObjs 28 } vRtrPimNgNotifyBierInbGAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyBierInbGAddrTyp ndicates the type of the group address in the PIM message." ::= { vRtrPimNgNotificationObjs 29 } vRtrPimNgNotifyBierInbGAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrPimNgNotifyBierInbGAddr indicates an IP multicast group address." ::= { vRtrPimNgNotificationObjs 30 } vRtrPimNgNotifyBierInbIAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrPimNgNotifyBierInbIAddrTyp ndicates the type of the IBBR address in the PIM message." ::= { vRtrPimNgNotificationObjs 31 } vRtrPimNgNotifyBierInbIAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrPimNgNotifyBierInbIAddr indicates an IP multicast bier inband IBBR address." ::= { vRtrPimNgNotificationObjs 32 } tmnxPimNgConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 50 } tmnxPimNgCompliances OBJECT IDENTIFIER ::= { tmnxPimNgConformance 1 } tmnxPimNgCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGroup, tmnxPimNgGlobalGrpSrcGroup, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group } ::= { tmnxPimNgCompliances 1 } tmnxPimNgV7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcGroup, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgMvpnV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgGlobalGroupV7v0, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group } ::= { tmnxPimNgCompliances 2 } tmnxPimNgV8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 8.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcGroup, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgMvpnV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0 } ::= { tmnxPimNgCompliances 3 } tmnxPimNgV9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 9.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group } ::= { tmnxPimNgCompliances 4 } tmnxPimNgV10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 10.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV10v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0 } ::= { tmnxPimNgCompliances 5 } tmnxPimNgV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 11.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV10v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0, tmnxPimNgGlobalGrpSrcV10v0Group, tmnxPimNgMVPNSndrRecvV11v0Group, tmnxPimNgFastFailover11v0Group, tmnxPimNgInterASMvpnV11v0Group } ::= { tmnxPimNgCompliances 6 } tmnxPimNgV12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 12.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgNotifyObjsV12v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV10v0Group, tmnxPimNgIfV12v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0, tmnxPimNgGlobalGrpSrcV10v0Group, tmnxPimNgMVPNSndrRecvV11v0Group, tmnxPimNgFastFailover11v0Group, tmnxPimNgInterASMvpnV11v0Group, tmnxPimNgCDV12v0Grp, tmnxPimNgMvpnSrcPrefixV12v0Grp, tmnxPimNgSgStatcExtrntV12v0Grp, tmnxPimNgUnicastRtRemV12v0Group } ::= { tmnxPimNgCompliances 7 } tmnxPimNgV13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 13.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgNotifyObjsV12v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV12v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0, tmnxPimNgGlobalGrpSrcV10v0Group, tmnxPimNgMVPNSndrRecvV11v0Group, tmnxPimNgFastFailover11v0Group, tmnxPimNgInterASMvpnV11v0Group, tmnxPimNgCDV12v0Grp, tmnxPimNgMvpnSrcPrefixV12v0Grp, tmnxPimNgSgStatcExtrntV12v0Grp, tmnxPimNgUnicastRtRemV12v0Group, tmnxPimNgMcastInbandSigV13v0Grp, tmnxPimNgMulticastSpmsiV13v0Grp, tmnxPimAsmExtranetV13v0Grp, tmnxPimNgIfV13v0Group, tmnxPimNgObsoletedV13v0Group } ::= { tmnxPimNgCompliances 8 } tmnxPimNgV14v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 14.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgIfV14v0Group, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgNotifyObjsV12v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV12v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0, tmnxPimNgGlobalGrpSrcV10v0Group, tmnxPimNgMVPNSndrRecvV11v0Group, tmnxPimNgFastFailover11v0Group, tmnxPimNgInterASMvpnV11v0Group, tmnxPimNgCDV12v0Grp, tmnxPimNgMvpnSrcPrefixV12v0Grp, tmnxPimNgSgStatcExtrntV12v0Grp, tmnxPimNgUnicastRtRemV12v0Group, tmnxPimNgMcastInbandSigV13v0Grp, tmnxPimNgMulticastSpmsiV13v0Grp, tmnxPimAsmExtranetV13v0Grp, tmnxPimNgIfV13v0Group, tmnxPimNgObsoletedV13v0Group, tmnxPimNgGenV14v0Group, tmnxPimNgDataMtPlcyV14v0Group, tmnxPimNgGenStatMdtsV14v0Group, tmnxPimNgDMAutoRpV14v0Group, tmnxPimNgNotifyObjsV14v0Group, tmnxPimNgNotificationV14v0Group } ::= { tmnxPimNgCompliances 9 } tmnxPimNgV15v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 15.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGrpSrcV9v0Group, tmnxPimNgIfGroup, tmnxPimNgIfV14v0Group, tmnxPimNgNotificationGroup, tmnxPimIfSecNbrV6v0Group, tmnxPimNgEmbeddedRPV7v0Group, tmnxPimNgV7v0Group, tmnxPimNgIfStatsV7v0Group, tmnxPimNgNotificationV7v0Group, tmnxPimNgNotifyObjsV7v0Group, tmnxPimNgNotifyObjsV12v0Group, tmnxPimNgMvpnV8v0Group, tmnxPimNgEchoGroup, tmnxPimNgIfV8v0Group, tmnxPimNgGlobalSSMV6v1Group, tmnxPimNgGlobalGroupV8v0, tmnxPimNgIfIpv6BfdV9v0Group, tmnxPimNgMvpnV9v0Group, tmnxPimNgIfStatsV9v0Group, tmnxPimNgIfIPMSIV9v0Group, tmnxPimNgMvpnV9v0R4Group, tmnxPimNgLdpEntryV10v0Group, tmnxPimNgIfV12v0Group, tmnxPimNgGlobalGroupV10v0, tmnxPimNgIfStatsV10v0Group, tmnxPimNgMvpnExtranetGroupV10v0, tmnxPimNgGlobalGrpSrcV10v0Group, tmnxPimNgMVPNSndrRecvV11v0Group, tmnxPimNgFastFailover11v0Group, tmnxPimNgInterASMvpnV11v0Group, tmnxPimNgCDV12v0Grp, tmnxPimNgMvpnSrcPrefixV12v0Grp, tmnxPimNgSgStatcExtrntV12v0Grp, tmnxPimNgUnicastRtRemV12v0Group, tmnxPimNgMcastInbandSigV13v0Grp, tmnxPimNgMulticastSpmsiV13v0Grp, tmnxPimAsmExtranetV13v0Grp, tmnxPimNgIfV13v0Group, tmnxPimNgObsoletedV13v0Group, tmnxPimNgGenV14v0Group, tmnxPimNgDataMtPlcyV14v0Group, tmnxPimNgGenStatMdtsV14v0Group, tmnxPimNgDMAutoRpV14v0Group, tmnxPimNgNotifyObjsV14v0Group, tmnxPimNgNotificationV14v0Group, tmnxPimNgVRRPAwarePim15v0Group, tmnxPimNotifyObjsV19v0Group, tmnxPimNgNotificationV19v0Group } ::= { tmnxPimNgCompliances 10 } tmnxPimNgV16v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 16.0." MODULE MANDATORY-GROUPS { tmnxPimNgDataMtPlcyV16v0Group, tmnxPimNgBIERV16v0Group } ::= { tmnxPimNgCompliances 11 } tmnxPimNgV19v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 19.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGroupV19v0, tmnxPimNgIfV19v0Group, tmnxPimNgSsmScalingV19v0Group, tmnxPimNgIfBierSigV19v0Group, tmnxPimNgIfTSidV19v0Group, tmnxPimNgMulticastSpmsiV19v0Grp } ::= { tmnxPimNgCompliances 12 } tmnxPimNgV20v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended PIM protocol on Nokia SROS series systems release 20.0." MODULE MANDATORY-GROUPS { tmnxPimNgGlobalGroupV20v0, tmnxPimNgMulticastSpmsiV20v0Grp, tmnxPimNgMsSpmsiTreeSidV20v0Grp, tmnxPimNgAfGenAutoRPV20v0Grp } ::= { tmnxPimNgCompliances 13 } tmnxPimNgGroups OBJECT IDENTIFIER ::= { tmnxPimNgConformance 2 } tmnxPimNgGlobalGroup OBJECT-GROUP OBJECTS { vRtrPimNgGeneralTableLstChanged, vRtrPimNgGenRowLastChanged, vRtrPimNgGenAdminState, vRtrPimNgGenOperState, vRtrPimNgGenCreateInterfaces, vRtrPimNgGenMaxMdts, vRtrPimNgGenNonDrAttractTraffic, vRtrPimNgGenEcmpBalance, vRtrPimNgGenEcmpBalanceHoldTime, vRtrPimNgGenEcmpReBlncInProg, vRtrPimNgGenEcmpLastReBlncTime, vRtrPimNgGenEcmpRebalanceType, vRtrPimNgGenEcmpOptThreshold, vRtrPimNgGenEcmpNextBalanceTime, vRtrPimNgGenLagUsageOptimize, vRtrPimNgAFGenTableLstChanged, vRtrPimNgAFGenAdminState, vRtrPimNgAFGenOperState, vRtrPimNgAFGenCBSRPriority, vRtrPimNgAFGenCBSRAddressType, vRtrPimNgAFGenCBSRAddress, vRtrPimNgAFGenCBSRAdminState, vRtrPimNgAFGenCBSROperState, vRtrPimNgAFGenBSRAddressType, vRtrPimNgAFGenBSRAddress, vRtrPimNgAFGenBSRPriority, vRtrPimNgAFGenBSRExpiryTime, vRtrPimNgAFGenBSRState, vRtrPimNgAFGenBSRUpTime, vRtrPimNgAFGenCRPAddressType, vRtrPimNgAFGenCRPAddress, vRtrPimNgAFGenCRPAdminState, vRtrPimNgAFGenCRPOperState, vRtrPimNgAFGenCRPHoldtime, vRtrPimNgAFGenCRPPriority, vRtrPimNgAFGenMdtDefGrpAddrType, vRtrPimNgAFGenMdtDefGrpAddress, vRtrPimNgAFGenMTIfIndex, vRtrPimNgAFGenCBSRHashMaskLen, vRtrPimNgAFGenBSRHashMaskLen, vRtrPimNgAFGenBSRRpfIfIndex, vRtrPimNgAFGenRpfLookupSequence, vRtrPimNgAFGenMdtDataPrefixType, vRtrPimNgAFGenMdtDataPrefix, vRtrPimNgAFGenMdtDataPrefixMask, vRtrPimNgAFGenMdtDataDlayIntrvl, vRtrPimNgAFGenMdtDataJoinTlvPck, vRtrPimNgAFGenRowLastChanged, vRtrPimNgStaticRPTableLstChnged, vRtrPimNgStaticRPRowStatus, vRtrPimNgStaticRPRowLastChanged, vRtrPimNgStaticRPOverride, vRtrPimNgStGrptoRPTableLstChngd, vRtrPimNgStGrpToRPRowStatus, vRtrPimNgStGrpToRPRowLstChanged, vRtrPimNgCRPGrpPrfxTblLstChnged, vRtrPimNgCRPGrpPrefixRowStatus, vRtrPimNgCRPGrpPrfixRowLstChngd, vRtrPimNgCRPHoldtime, vRtrPimNgCRPPriority, vRtrPimNgCRPExpiryTime, vRtrPimNgRPSetHoldtime, vRtrPimNgRPSetPriority, vRtrPimNgRPSetExpiryTime, vRtrPimNgGenStatTxCrpaPdus, vRtrPimNgGenStatTxCrpaPduErrs, vRtrPimNgGenStatRxCrpaPdus, vRtrPimNgGenStatRxCrpaPduDrops, vRtrPimNgGenStatStarStarRPTypes, vRtrPimNgGenStatStarGTypes, vRtrPimNgGenStatSGTypes, vRtrPimNgGenStatTxRegisters, vRtrPimNgGenStatTxRegisterErrs, vRtrPimNgGenStatTxNullRegisters, vRtrPimNgGenStatTxRegTTLDrops, vRtrPimNgGenStatForwardCrpaPdus, vRtrPimNgGenStatFwdCrpaDrops, vRtrPimNgGenStatTxMdtJoinTlvs, vRtrPimNgGenStatRxMdtJoinTlvs, vRtrPimNgGenStatTxMdtJnTlvErrs, vRtrPimNgGenStatRxMdtJnTlvErrs, vRtrPimNgGenStatTxActiveMdts, vRtrPimNgGenStatRxActiveMdts, vRtrPimNgImportJoinPrunePolicy1, vRtrPimNgImportJoinPrunePolicy2, vRtrPimNgImportJoinPrunePolicy3, vRtrPimNgImportJoinPrunePolicy4, vRtrPimNgImportJoinPrunePolicy5, vRtrPimNgImportRegisterPolicy1, vRtrPimNgImportRegisterPolicy2, vRtrPimNgImportRegisterPolicy3, vRtrPimNgImportRegisterPolicy4, vRtrPimNgImportRegisterPolicy5, vRtrPimNgImportBootstrapPolicy1, vRtrPimNgImportBootstrapPolicy2, vRtrPimNgImportBootstrapPolicy3, vRtrPimNgImportBootstrapPolicy4, vRtrPimNgImportBootstrapPolicy5, vRtrPimNgExportBootstrapPolicy1, vRtrPimNgExportBootstrapPolicy2, vRtrPimNgExportBootstrapPolicy3, vRtrPimNgExportBootstrapPolicy4, vRtrPimNgExportBootstrapPolicy5, vRtrPimNgSSMGroupTableLstChngd, vRtrPimNgSSMGroupRowStatus, vRtrPimNgSSMGroupRowLastChanged, vRtrPimNgAnycastRPTableLstChngd, vRtrPimNgAnycastRPRowStatus, vRtrPimNgAnycastRPRowLstChanged, vRtrPimNgSptSwOvrThdTabLstChngd, vRtrPimNgSptSwovrThdRowStatus, vRtrPimNgSptSwovrThdRowLstChngd, vRtrPimNgSptSwitchoverThd, vRtrPimNgDataMtThdTableLstChngd, vRtrPimNgDataMtThdRowStatus, vRtrPimNgDataMtThdRowLstChngd, vRtrPimNgDataMtThd } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series systems." ::= { tmnxPimNgGroups 1 } tmnxPimNgGlobalGrpSrcGroup OBJECT-GROUP OBJECTS { vRtrPimNgGrpSrcType, vRtrPimNgGrpSrcRPAddrType, vRtrPimNgGrpSrcRPAddr, vRtrPimNgGrpSrcRpfNbrAddrType, vRtrPimNgGrpSrcRpfNbrAddr, vRtrPimNgGrpSrcRpfIfIndex, vRtrPimNgGrpSrcRptRpfNbrAdrType, vRtrPimNgGrpSrcRptRpfNbrAddr, vRtrPimNgGrpSrcMRIBNHopAddrType, vRtrPimNgGrpSrcMRIBNextHopAddr, vRtrPimNgGrpSrcMRIBSrcFlags, vRtrPimNgGrpSrcFlags, vRtrPimNgGrpSrcUpstreamJpState, vRtrPimNgGrpSrcUpstreamJpTimer, vRtrPimNgGrpSrcUstrmRptJpState, vRtrPimNgGrpSrcUstrmRptOvrdeTmr, vRtrPimNgGrpSrcRegisterState, vRtrPimNgGrpSrcRegisterStopTmr, vRtrPimNgGrpSrcKeepaliveTimer, vRtrPimNgGrpSrcNumImmediateOif, vRtrPimNgGrpSrcNumInheritedOif, vRtrPimNgGrpSrcNumInherRptOif, vRtrPimNgGrpSrcNumLclRxInclIf, vRtrPimNgGrpSrcNumLclRxExclIf, vRtrPimNgGrpSrcNumJoinPruneIf, vRtrPimNgGrpSrcNumLostAssertIf, vRtrPimNgGrpSrcUpTime, vRtrPimNgGrpSrcNumSGRptPruneOif, vRtrPimNgGrpSrcRxRegFrmAnycstRP, vRtrPimNgGrpSrcRslvdByRtTblType, vRtrPimNgGrpSrcCurrFwdingRate, vRtrPimNgGrpSrcCurrFwdingOFRate, vRtrPimNgGrpSrcCurrFwdingHCRate, vRtrPimNgGrpSrcGrpSptThreshold, vRtrPimNgGrpSrcIfFlags, vRtrPimNgGrpSrcStatFrwdedPkts, vRtrPimNgGrpSrcStatOFFrwdedPkts, vRtrPimNgGrpSrcStatHCFrwdedPkts, vRtrPimNgGrpSrcStatDscrdPkts, vRtrPimNgGrpSrcStatOFDscrdPkts, vRtrPimNgGrpSrcStatHCDscrdPkts, vRtrPimNgGrpSrcStatRPFMsmtch, vRtrPimNgGrpSrcStatOFRPFMsmtch, vRtrPimNgGrpSrcStatHCRPFMsmtch, vRtrPimNgGrpSrcStatFrdedOct, vRtrPimNgGrpSrcStatOFFrdedOct, vRtrPimNgGrpSrcStatHCFrdedOct, vRtrPimNgGrpSrcGrpAdminBw, vRtrPimNgGrpSrcGrpEcmpOptThresh, vRtrPimNgGrpSrcHostFlags } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series systems." ::= { tmnxPimNgGroups 2 } tmnxPimNgIfGroup OBJECT-GROUP OBJECTS { vRtrPimNgIfTableLastChanged, vRtrPimNgIfRowStatus, vRtrPimNgIfLastChangeTime, vRtrPimNgIfAdminState, vRtrPimNgIfOperState, vRtrPimNgIfHelloInterval, vRtrPimNgIfTrackingSupport, vRtrPimNgIfMulticastSenders, vRtrPimNgIfAutoCreated, vRtrPimNgIfBSMCheckRouterAlert, vRtrPimNgIfHelloMultiplier, vRtrPimNgIfImprovedAssert, vRtrPimNgIfStickyDR, vRtrPimNgIfStickyDRPriority, vRtrPimNgIfMaxGroups, vRtrPimNgIfEnableBfd, vRtrPimNgIfThreeWayHello, vRtrPimNgIfMcacPolicyName, vRtrPimNgIfMcacUnconstrainedBW, vRtrPimNgIfMcacConstAdminState, vRtrPimNgIfMcacPreRsvdMandBW, vRtrPimNgIfMcacinUseMandBw, vRtrPimNgIfMcacinUseOpnlBw, vRtrPimNgIfMcacAvailMandBw, vRtrPimNgIfMcacAvailOpnlBw, vRtrPimNgIfMcacValuesInTransit, vRtrPimNgIfDRPriority, vRtrPimNgIfAssertPeriod, vRtrPimNgAFIfAdminState, vRtrPimNgAFIfOperState, vRtrPimNgAFIfMdtDefGrpAddrType, vRtrPimNgAFIfMdtDefGrpAddress, vRtrPimNgAFIfNextHelloTime, vRtrPimNgAFIfOperDRPriority, vRtrPimNgAFIfCurrentGroups, vRtrPimNgAFIfMaxGroupsTillNow, vRtrPimNgAFIfDRType, vRtrPimNgAFIfDR, vRtrPimNgAFIfTrackSprtOperState, vRtrPimNgIfNeighborUpTime, vRtrPimNgIfNeighborExpiryTime, vRtrPimNgIfNeighborGenId, vRtrPimNgIfNeighborDrPriority, vRtrPimNgIfNeighborDrPriorPrsnt, vRtrPimNgIfNeighborLanDelay, vRtrPimNgIfNeighborLanDlayPrsnt, vRtrPimNgIfNeighborTrckngSpprt, vRtrPimNgIfNeighborHoldTime, vRtrPimNgIfNeighborOvrdeIntrvl, vRtrPimNgIfGrpSrcRPAddrType, vRtrPimNgIfGrpSrcRPAddress, vRtrPimNgIfGrpSrcJPState, vRtrPimNgIfGrpSrcPrunePendTimer, vRtrPimNgIfGrpSrcJoinPruneTimer, vRtrPimNgIfGrpSrcJPRptState, vRtrPimNgIfGrpSrcRptPrnePendTmr, vRtrPimNgIfGrpSrcRptJoinPrneTmr, vRtrPimNgIfGrpSrcAssertState, vRtrPimNgIfGrpSrcAssertTimer, vRtrPimNgIfGrpSrcAssertMetric, vRtrPimNgIfGrpSrcAsrtMetricPref, vRtrPimNgIfGrpSrcAssertRPTBit, vRtrPimNgIfGrpSrcAsrtWinnerMtrc, vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf, vRtrPimNgIfGrpSrcAsrtWnrRPTBit, vRtrPimNgIfGrpSrcAsrtWnrAddrTyp, vRtrPimNgIfGrpSrcAsrtWinnerAddr, vRtrPimNgIfGrpSrcUpTime, vRtrPimNgIfGrpSrcDataMtIfIndex, vRtrPimNgIfTxPkts, vRtrPimNgIfTxHellos, vRtrPimNgIfTxAsserts, vRtrPimNgIfTxRegisterStops, vRtrPimNgIfTxRegisterStopErrs, vRtrPimNgIfTxBsmPdus, vRtrPimNgIfTxBsmErrs, vRtrPimNgIfRxPkts, vRtrPimNgIfRxHellos, vRtrPimNgIfRxHellosDropped, vRtrPimNgIfRxNbrUnknown, vRtrPimNgIfRxBadChecksumDiscard, vRtrPimNgIfRxBadVersionDiscard, vRtrPimNgIfRxBadEncodings, vRtrPimNgIfRxAsserts, vRtrPimNgIfRxAssertErrs, vRtrPimNgIfRxRegisters, vRtrPimNgIfRxRegisterErrs, vRtrPimNgIfRxNullRegisters, vRtrPimNgIfRxRegisterStops, vRtrPimNgIfRxRegisterStopErrs, vRtrPimNgIfRxCRPAdvNoRtrAlert, vRtrPimNgIfRxBsmPdus, vRtrPimNgIfRxBsmPduDrops, vRtrPimNgIfStarStarRPTypes, vRtrPimNgIfStarGTypes, vRtrPimNgIfSGTypes, vRtrPimNgIfJoinPolicyDrops, vRtrPimNgIfRegisterPolicyDrops, vRtrPimNgIfBtrImpPolicyDrops, vRtrPimNgIfBtrExpPolicyDrops, vRtrPimNgIfTxJoinPrunes, vRtrPimNgIfRxJoinPrunes, vRtrPimNgIfRxInvalidJoinPrunes, vRtrPimNgIfRxInvalidRegisters, vRtrPimNgIfRxUnknownPdus, vRtrPimNgIfRxJoinPruneErrs, vRtrPimNgIfRxBSMNoRouterAlertDrops, vRtrPimNgIfRxBSMWrongIfDrops, vRtrPimNgDataMtIfIndex, vRtrPimNgDataMtUptime, vRtrPimNgDataMtNumVpnSGs, vRtrPimNgDataMtCGrpSrcState, vRtrPimNgDataMtCGrpSrcJoinTimer, vRtrPimNgDataMtCGrpSrcHolddownTimer, vRtrPimNgDataMtCGrpSrcExpiryTimer, vRtrPimNgDataMtCGrpSrcUptime, vRtrPimNgDataMtCGrpSrcDataMtThreshold, vRtrPimNgDataMtCGrpSrcIfIndex, vRtrPimNgIfMcacPolicyDrops, vRtrPimNgIfMcacLevelTblLstChngd, vRtrPimNgIfMcacLevelRowStatus, vRtrPimNgIfMcacLvlRowLstChngd, vRtrPimNgIfMcacLevelBW, vRtrPimNgIfMcacLagTableLstChngd, vRtrPimNgIfMcacLagRowStatus, vRtrPimNgIfMcacLagRowLstChngd, vRtrPimNgIfMcacLagLevel } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS series systems." ::= { tmnxPimNgGroups 3 } tmnxPimNgNotifyObjsGroup OBJECT-GROUP OBJECTS { vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifyRPAddrType, vRtrPimNgNotifyRPAddr, vRtrPimNgNotifyWrongRPAddrType, vRtrPimNgNotifyWrongRPAddr, vRtrPimNgNotifyMsgType } STATUS current DESCRIPTION "The group of objects supporting PIM notifications on Nokia SROS series systems." ::= { tmnxPimNgGroups 4 } tmnxPimNgNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vRtrPimNgIfNeighborLoss, vRtrPimNgIfNeighborUp, vRtrPimNgInvalidJoinPrune, vRtrPimNgInvalidRegister, vRtrPimNgGrpInSSMRange, vRtrPimNgBSRStateChange, vRtrPimNgHelloDropped, vRtrPimNgSGLimitExceeded, vRtrPimNgReplicationLmtExceeded, vRtrPimNgMDTLimitExceeded, vRtrPimNgMaxGrpsLimitExceeded, vRtrPimNgDataMtReused, vRtrPimNgMcacPlcyDropped } STATUS current DESCRIPTION "The group of notifications supporting PIM protocol on Nokia SROS series systems." ::= { tmnxPimNgGroups 5 } tmnxPimNgEmbeddedRPV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenERP, vRtrPimNgAFGenERPAdminState, vRtrPimNgERPGrpPrfxTblLstChnged, vRtrPimNgERPGrpPrefixRowStatus } STATUS current DESCRIPTION "The group of objects supporting embedded RP feature for PIM protocol on Nokia SROS series systems." ::= { tmnxPimNgGroups 6 } tmnxPimNgMvpnV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenMvpnAutoDiscovery, vRtrPimNgAFGenMvpnCMcastSignal, vRtrPimNgAFGenMvpnGrpAddrMode, vRtrPimNgAFGenMvpnSpmsiAutoDisc } STATUS obsolete DESCRIPTION "The group of objects supporting PIM protocol MVPN feature on Nokia SROS series systems." ::= { tmnxPimNgGroups 7 } tmnxPimNgV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgRsvpIfRowStatus, vRtrPimNgRsvpIfIndex, vRtrPimNgRsvpIfOperState } STATUS current DESCRIPTION "The group of objects supporting PIM protocol tunnel interfaces on Nokia SROS series systems." ::= { tmnxPimNgGroups 8 } tmnxPimNgGlobalGroupV7v0 OBJECT-GROUP OBJECTS { vRtrPimNgGeneralTableLstChanged, vRtrPimNgGenRowLastChanged, vRtrPimNgGenAdminState, vRtrPimNgGenOperState, vRtrPimNgGenCreateInterfaces, vRtrPimNgGenMaxMdts, vRtrPimNgGenNonDrAttractTraffic, vRtrPimNgGenEcmpBalance, vRtrPimNgGenEcmpBalanceHoldTime, vRtrPimNgGenEcmpReBlncInProg, vRtrPimNgGenEcmpLastReBlncTime, vRtrPimNgGenEcmpRebalanceType, vRtrPimNgGenEcmpNextBalanceTime, vRtrPimNgGenLagUsageOptimize, vRtrPimNgAFGenTableLstChanged, vRtrPimNgAFGenAdminState, vRtrPimNgAFGenOperState, vRtrPimNgAFGenCBSRPriority, vRtrPimNgAFGenCBSRAddressType, vRtrPimNgAFGenCBSRAddress, vRtrPimNgAFGenCBSRAdminState, vRtrPimNgAFGenCBSROperState, vRtrPimNgAFGenBSRAddressType, vRtrPimNgAFGenBSRAddress, vRtrPimNgAFGenBSRPriority, vRtrPimNgAFGenBSRExpiryTime, vRtrPimNgAFGenBSRState, vRtrPimNgAFGenBSRUpTime, vRtrPimNgAFGenCRPAddressType, vRtrPimNgAFGenCRPAddress, vRtrPimNgAFGenCRPAdminState, vRtrPimNgAFGenCRPOperState, vRtrPimNgAFGenCRPHoldtime, vRtrPimNgAFGenCRPPriority, vRtrPimNgAFGenMdtDefGrpAddrType, vRtrPimNgAFGenMdtDefGrpAddress, vRtrPimNgAFGenMTIfIndex, vRtrPimNgAFGenCBSRHashMaskLen, vRtrPimNgAFGenBSRHashMaskLen, vRtrPimNgAFGenBSRRpfIfIndex, vRtrPimNgAFGenRpfLookupSequence, vRtrPimNgAFGenMdtDataPrefixType, vRtrPimNgAFGenMdtDataPrefix, vRtrPimNgAFGenMdtDataPrefixMask, vRtrPimNgAFGenMdtDataDlayIntrvl, vRtrPimNgAFGenMdtDataJoinTlvPck, vRtrPimNgAFGenRowLastChanged, vRtrPimNgStaticRPTableLstChnged, vRtrPimNgStaticRPRowStatus, vRtrPimNgStaticRPRowLastChanged, vRtrPimNgStaticRPOverride, vRtrPimNgStGrptoRPTableLstChngd, vRtrPimNgStGrpToRPRowStatus, vRtrPimNgStGrpToRPRowLstChanged, vRtrPimNgGenStatTxCrpaPdus, vRtrPimNgGenStatTxCrpaPduErrs, vRtrPimNgGenStatRxCrpaPdus, vRtrPimNgGenStatRxCrpaPduDrops, vRtrPimNgGenStatStarStarRPTypes, vRtrPimNgGenStatStarGTypes, vRtrPimNgGenStatSGTypes, vRtrPimNgGenStatTxRegisters, vRtrPimNgGenStatTxRegisterErrs, vRtrPimNgGenStatTxNullRegisters, vRtrPimNgGenStatTxRegTTLDrops, vRtrPimNgGenStatForwardCrpaPdus, vRtrPimNgGenStatFwdCrpaDrops, vRtrPimNgGenStatTxMdtJoinTlvs, vRtrPimNgGenStatRxMdtJoinTlvs, vRtrPimNgGenStatTxMdtJnTlvErrs, vRtrPimNgGenStatRxMdtJnTlvErrs, vRtrPimNgGenStatTxActiveMdts, vRtrPimNgGenStatRxActiveMdts, vRtrPimNgImportJoinPrunePolicy1, vRtrPimNgImportJoinPrunePolicy2, vRtrPimNgImportJoinPrunePolicy3, vRtrPimNgImportJoinPrunePolicy4, vRtrPimNgImportJoinPrunePolicy5, vRtrPimNgImportRegisterPolicy1, vRtrPimNgImportRegisterPolicy2, vRtrPimNgImportRegisterPolicy3, vRtrPimNgImportRegisterPolicy4, vRtrPimNgImportRegisterPolicy5, vRtrPimNgImportBootstrapPolicy1, vRtrPimNgImportBootstrapPolicy2, vRtrPimNgImportBootstrapPolicy3, vRtrPimNgImportBootstrapPolicy4, vRtrPimNgImportBootstrapPolicy5, vRtrPimNgExportBootstrapPolicy1, vRtrPimNgExportBootstrapPolicy2, vRtrPimNgExportBootstrapPolicy3, vRtrPimNgExportBootstrapPolicy4, vRtrPimNgExportBootstrapPolicy5, vRtrPimNgSSMGroupTableLstChngd, vRtrPimNgSSMGroupRowStatus, vRtrPimNgSSMGroupRowLastChanged, vRtrPimNgAnycastRPTableLstChngd, vRtrPimNgAnycastRPRowStatus, vRtrPimNgAnycastRPRowLstChanged, vRtrPimNgSptSwOvrThdTabLstChngd, vRtrPimNgSptSwovrThdRowStatus, vRtrPimNgSptSwovrThdRowLstChngd, vRtrPimNgSptSwitchoverThd, vRtrPimNgDataMtThdTableLstChngd, vRtrPimNgDataMtThdRowStatus, vRtrPimNgDataMtThdRowLstChngd, vRtrPimNgDataMtThd, vRtrPimNgCRPGpPfxInetTblLstChngd, vRtrPimNgCRPGrpPrfxInetRowStatus, vRtrPimNgCRPGrpPfxInetRowLstChgd, vRtrPimNgCRPInetHoldtime, vRtrPimNgCRPInetPriority, vRtrPimNgCRPInetExpiryTime, vRtrPimNgRPSetInetHoldtime, vRtrPimNgRPSetInetPriority, vRtrPimNgRPSetInetExpiryTime } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series systems." ::= { tmnxPimNgGroups 9 } tmnxPimNgObsoleteV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgCRPGrpPrfxTblLstChnged, vRtrPimNgCRPGrpPrefixRowStatus, vRtrPimNgCRPGrpPrfixRowLstChngd, vRtrPimNgCRPHoldtime, vRtrPimNgCRPPriority, vRtrPimNgCRPExpiryTime, vRtrPimNgRPSetHoldtime, vRtrPimNgRPSetPriority, vRtrPimNgRPSetExpiryTime } STATUS current DESCRIPTION "The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in Nokia SROS 7.0 series systems." ::= { tmnxPimNgGroups 10 } tmnxPimIfSecNbrV6v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfSecNbrTblLstChanged, vRtrPimNgIfSecNbrAddrType, vRtrPimNgIfSecNbrAddress } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interface neighbors on Nokia SROS 6.0 series systems." ::= { tmnxPimNgGroups 11 } tmnxPimNgIfStatsV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfTxIntraASAD, vRtrPimNgIfRxIntraASAD, vRtrPimNgIfRxIntraASADErrs, vRtrPimNgIfTxInterASAD, vRtrPimNgIfRxInterASAD, vRtrPimNgIfRxInterASADErrs, vRtrPimNgIfTxSpmsiAD, vRtrPimNgIfRxSpmsiAD, vRtrPimNgIfRxSpmsiADErrs, vRtrPimNgIfTxLeafAD, vRtrPimNgIfRxLeafAD, vRtrPimNgIfRxLeafADErrs, vRtrPimNgIfTxSrcActAD, vRtrPimNgIfRxSrcActAD, vRtrPimNgIfTxSrcActADErrs, vRtrPimNgIfTxSharedTreeJoin, vRtrPimNgIfRxSharedTreeJoin, vRtrPimNgIfRxSharedTreeJoinErrs, vRtrPimNgIfTxSrcTreeJoin, vRtrPimNgIfRxSrcTreeJoin, vRtrPimNgIfRxSrcTreeJoinErrs, vRtrPimNgIfTxBgpPkts, vRtrPimNgIfRxBgpPkts } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interface statistics on Nokia SROS series systems." ::= { tmnxPimNgGroups 12 } tmnxPimNgObsoleteV6v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGenEcmpOptThreshold } STATUS current DESCRIPTION "The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in Nokia SROS series systems." ::= { tmnxPimNgGroups 13 } tmnxPimNgNotificationV7v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrPimNgInvalidIPmsiTunnel } STATUS current DESCRIPTION "The group of notifications supporting PIM protocol on 7.0 release of Nokia SROS series systems." ::= { tmnxPimNgGroups 14 } tmnxPimNgNotifyObjsV7v0Group OBJECT-GROUP OBJECTS { vRtrPimNgWrongMdtDefGrpAddrType, vRtrPimNgWrongMdtDefGrpAddr } STATUS current DESCRIPTION "The group of objects added in the 7.0 release to support PIM notifications." ::= { tmnxPimNgGroups 15 } tmnxPimNgMvpnV8v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenMvpnUMHSelection, vRtrPimNgAFGenMvpnIntersiteShrd } STATUS current DESCRIPTION "The group of objects supporting PIM protocol MVPN feature on Nokia SROS 8.0 series systems." ::= { tmnxPimNgGroups 16 } tmnxPimNgEchoGroup OBJECT-GROUP OBJECTS { vRtrPimNgIfInstantPruneEcho } STATUS current DESCRIPTION "The group of objects supporting the management of extended PIM Instant Prune Echo capabilities on Nokia SROS systems." ::= { tmnxPimNgGroups 17 } tmnxPimNgIfV8v0Group OBJECT-GROUP OBJECTS { vRtrPimNgRsvpPmsiIfIndex, vRtrPimNgRsvpPmsiUptime, vRtrPimNgRsvpPmsiNumVpnSGs, vRtrPimRsvpPmsiCGrpSrcState, vRtrPimRsvpPmsiCGrpSrcJoinTimer, vRtrPimRsvpPmsiCGrpSrcHldDnTimer, vRtrPimRsvpPmsiCGrpSrcExpTimer, vRtrPimRsvpPmsiCGrpSrcUptime, vRtrPimDataMtCGrpSrcDataThresh, vRtrPimRsvpPmsiCGrpSrcIfIndex } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 8.0 series systems." ::= { tmnxPimNgGroups 19 } tmnxPimNgGlobalSSMV6v1Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenSSMDefRangeDisabl } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS 6.1 series systems." ::= { tmnxPimNgGroups 20 } tmnxPimNgGlobalGroupV8v0 OBJECT-GROUP OBJECTS { vRtrPimNgGeneralTableLstChanged, vRtrPimNgGenRowLastChanged, vRtrPimNgGenAdminState, vRtrPimNgGenOperState, vRtrPimNgGenCreateInterfaces, vRtrPimNgGenMaxMdts, vRtrPimNgGenNonDrAttractTraffic, vRtrPimNgGenEcmpBalance, vRtrPimNgGenEcmpBalanceHoldTime, vRtrPimNgGenEcmpReBlncInProg, vRtrPimNgGenEcmpLastReBlncTime, vRtrPimNgGenEcmpRebalanceType, vRtrPimNgGenEcmpNextBalanceTime, vRtrPimNgGenLagUsageOptimize, vRtrPimNgAFGenTableLstChanged, vRtrPimNgAFGenAdminState, vRtrPimNgAFGenOperState, vRtrPimNgAFGenCBSRPriority, vRtrPimNgAFGenCBSRAddressType, vRtrPimNgAFGenCBSRAddress, vRtrPimNgAFGenCBSRAdminState, vRtrPimNgAFGenCBSROperState, vRtrPimNgAFGenBSRAddressType, vRtrPimNgAFGenBSRAddress, vRtrPimNgAFGenBSRPriority, vRtrPimNgAFGenBSRExpiryTime, vRtrPimNgAFGenBSRState, vRtrPimNgAFGenBSRUpTime, vRtrPimNgAFGenCRPAddressType, vRtrPimNgAFGenCRPAddress, vRtrPimNgAFGenCRPAdminState, vRtrPimNgAFGenCRPOperState, vRtrPimNgAFGenCRPHoldtime, vRtrPimNgAFGenCRPPriority, vRtrPimNgAFGenMdtDefGrpAddrType, vRtrPimNgAFGenMdtDefGrpAddress, vRtrPimNgAFGenMTIfIndex, vRtrPimNgAFGenCBSRHashMaskLen, vRtrPimNgAFGenBSRHashMaskLen, vRtrPimNgAFGenBSRRpfIfIndex, vRtrPimNgAFGenRpfLookupSequence, vRtrPimNgAFGenMdtDataPrefixType, vRtrPimNgAFGenMdtDataPrefix, vRtrPimNgAFGenMdtDataPrefixMask, vRtrPimNgAFGenMdtDataDlayIntrvl, vRtrPimNgAFGenMdtDataJoinTlvPck, vRtrPimNgAFGenRowLastChanged, vRtrPimNgStaticRPTableLstChnged, vRtrPimNgStaticRPRowStatus, vRtrPimNgStaticRPRowLastChanged, vRtrPimNgStaticRPOverride, vRtrPimNgStGrptoRPTableLstChngd, vRtrPimNgStGrpToRPRowStatus, vRtrPimNgStGrpToRPRowLstChanged, vRtrPimNgGenStatTxCrpaPdus, vRtrPimNgGenStatTxCrpaPduErrs, vRtrPimNgGenStatRxCrpaPdus, vRtrPimNgGenStatRxCrpaPduDrops, vRtrPimNgGenStatStarStarRPTypes, vRtrPimNgGenStatStarGTypes, vRtrPimNgGenStatSGTypes, vRtrPimNgGenStatTxRegisters, vRtrPimNgGenStatTxRegisterErrs, vRtrPimNgGenStatTxNullRegisters, vRtrPimNgGenStatTxRegTTLDrops, vRtrPimNgGenStatForwardCrpaPdus, vRtrPimNgGenStatFwdCrpaDrops, vRtrPimNgGenStatTxMdtJoinTlvs, vRtrPimNgGenStatRxMdtJoinTlvs, vRtrPimNgGenStatTxMdtJnTlvErrs, vRtrPimNgGenStatRxMdtJnTlvErrs, vRtrPimNgGenStatTxActiveMdts, vRtrPimNgGenStatRxActiveMdts, vRtrPimNgImportJoinPrunePolicy1, vRtrPimNgImportJoinPrunePolicy2, vRtrPimNgImportJoinPrunePolicy3, vRtrPimNgImportJoinPrunePolicy4, vRtrPimNgImportJoinPrunePolicy5, vRtrPimNgImportRegisterPolicy1, vRtrPimNgImportRegisterPolicy2, vRtrPimNgImportRegisterPolicy3, vRtrPimNgImportRegisterPolicy4, vRtrPimNgImportRegisterPolicy5, vRtrPimNgImportBootstrapPolicy1, vRtrPimNgImportBootstrapPolicy2, vRtrPimNgImportBootstrapPolicy3, vRtrPimNgImportBootstrapPolicy4, vRtrPimNgImportBootstrapPolicy5, vRtrPimNgExportBootstrapPolicy1, vRtrPimNgExportBootstrapPolicy2, vRtrPimNgExportBootstrapPolicy3, vRtrPimNgExportBootstrapPolicy4, vRtrPimNgExportBootstrapPolicy5, vRtrPimNgSSMGroupTableLstChngd, vRtrPimNgSSMGroupRowStatus, vRtrPimNgSSMGroupRowLastChanged, vRtrPimNgAnycastRPTableLstChngd, vRtrPimNgAnycastRPRowStatus, vRtrPimNgAnycastRPRowLstChanged, vRtrPimNgSptSwOvrThdTabLstChngd, vRtrPimNgSptSwovrThdRowStatus, vRtrPimNgSptSwovrThdRowLstChngd, vRtrPimNgSptSwitchoverThd, vRtrPimNgDataMtThdTableLstChngd, vRtrPimNgDataMtThdRowStatus, vRtrPimNgDataMtThdRowLstChngd, vRtrPimNgDataMtThd, vRtrPimNgCRPGpPfxInetTblLstChngd, vRtrPimNgCRPGrpPrfxInetRowStatus, vRtrPimNgCRPGrpPfxInetRowLstChgd, vRtrPimNgCRPInetHoldtime, vRtrPimNgCRPInetPriority, vRtrPimNgCRPInetExpiryTime, vRtrPimNgRPSetInetHoldtime, vRtrPimNgRPSetInetPriority, vRtrPimNgRPSetInetExpiryTime, vRtrPimNgGenEcmpHashingEnabled, vRtrPimNgGenEnableMdtSpt, vRtrPimNgGenStatTxSpmsiLimitHits } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series systems." ::= { tmnxPimNgGroups 21 } tmnxPimNgGlobalGrpSrcV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGrpSrcType, vRtrPimNgGrpSrcRPAddrType, vRtrPimNgGrpSrcRPAddr, vRtrPimNgGrpSrcRpfNbrAddrType, vRtrPimNgGrpSrcRpfNbrAddr, vRtrPimNgGrpSrcRpfIfIndex, vRtrPimNgGrpSrcRptRpfNbrAdrType, vRtrPimNgGrpSrcRptRpfNbrAddr, vRtrPimNgGrpSrcMRIBNHopAddrType, vRtrPimNgGrpSrcMRIBNextHopAddr, vRtrPimNgGrpSrcMRIBSrcFlags, vRtrPimNgGrpSrcFlags, vRtrPimNgGrpSrcUpstreamJpState, vRtrPimNgGrpSrcUpstreamJpTimer, vRtrPimNgGrpSrcUstrmRptJpState, vRtrPimNgGrpSrcUstrmRptOvrdeTmr, vRtrPimNgGrpSrcRegisterState, vRtrPimNgGrpSrcRegisterStopTmr, vRtrPimNgGrpSrcKeepaliveTimer, vRtrPimNgGrpSrcNumImmediateOif, vRtrPimNgGrpSrcNumInheritedOif, vRtrPimNgGrpSrcNumInherRptOif, vRtrPimNgGrpSrcNumLclRxInclIf, vRtrPimNgGrpSrcNumLclRxExclIf, vRtrPimNgGrpSrcNumJoinPruneIf, vRtrPimNgGrpSrcNumLostAssertIf, vRtrPimNgGrpSrcUpTime, vRtrPimNgGrpSrcNumSGRptPruneOif, vRtrPimNgGrpSrcRxRegFrmAnycstRP, vRtrPimNgGrpSrcRslvdByRtTblType, vRtrPimNgGrpSrcCurrFwdingRate, vRtrPimNgGrpSrcCurrFwdingOFRate, vRtrPimNgGrpSrcCurrFwdingHCRate, vRtrPimNgGrpSrcGrpSptThreshold, vRtrPimNgGrpSrcIfFlags, vRtrPimNgGrpSrcStatFrwdedPkts, vRtrPimNgGrpSrcStatOFFrwdedPkts, vRtrPimNgGrpSrcStatHCFrwdedPkts, vRtrPimNgGrpSrcStatDscrdPkts, vRtrPimNgGrpSrcStatOFDscrdPkts, vRtrPimNgGrpSrcStatHCDscrdPkts, vRtrPimNgGrpSrcStatRPFMsmtch, vRtrPimNgGrpSrcStatOFRPFMsmtch, vRtrPimNgGrpSrcStatHCRPFMsmtch, vRtrPimNgGrpSrcStatFrdedOct, vRtrPimNgGrpSrcStatOFFrdedOct, vRtrPimNgGrpSrcStatHCFrdedOct, vRtrPimNgGrpSrcGrpAdminBw, vRtrPimNgGrpSrcGrpEcmpOptThresh, vRtrPimNgGrpSrcHostFlags, vRtrPimNgGrpSrcGrpIfFlags, vRtrPimNgGenStatRxCtrlPduIfDrops, vRtrPimNgGenStatP2mpPmsiReqFails, vRtrPimNgGenStatP2mpPmsiCrtFails, vRtrPimNgGrpSrcSpmsiRpfIfIndex, vRtrPimNgGrpSrcSpmsiIfIndex, vRtrPimNgGenStatTxMdts, vRtrPimNgGenStatRxMdts } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 9.0 systems." ::= { tmnxPimNgGroups 22 } tmnxPimNgIfIpv6BfdV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfIpv6EnableBfd } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 9.0 series systems." ::= { tmnxPimNgGroups 23 } tmnxPimNgNotifyObjsV8v0Group OBJECT-GROUP OBJECTS { vRtrPimNgWrongPmsiType, vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId, vRtrPimNgWrongPmsiExtTunlAdrTyp, vRtrPimNgWrongPmsiExtTunlAddr, vRtrPimNgWrongVprnId } STATUS current DESCRIPTION "The group of objects added in the 8.0 R5 release to support PIM notifications." ::= { tmnxPimNgGroups 24 } tmnxPimNgLdpEntryV10v0Group OBJECT-GROUP OBJECTS { vRtrPimNgLdpPmsiIfIndex, vRtrPimNgLdpPmsiUptime, vRtrPimNgLdpPmsiNumVpnSGs, vRtrPimLdpPmsiCGrpSrcState, vRtrPimLdpPmsiCGrpSrcJoinTimer, vRtrPimLdpPmsiCGrpSrcHldDnTimer, vRtrPimLdpPmsiCGrpSrcExpTimer, vRtrPimLdpPmsiCGrpSrcUptime, vRtrPimLdpDataMtCGrpSrcDataThres, vRtrPimLdpPmsiCGrpSrcIfIndex, vRtrPimNgLdpPmsiIfType } STATUS current DESCRIPTION "The group of objects supporting management of mLDP PMSI interfaces on Nokia SROS 10.0 series systems." ::= { tmnxPimNgGroups 25 } tmnxPimNgNotifyObjsV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp, vRtrPimNgWrongPmsiSenderAddr } STATUS current DESCRIPTION "The group of objects added in the 9.0 release to support PIM notifications." ::= { tmnxPimNgGroups 26 } tmnxPimNgObsoletedV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenMvpnAutoDiscovery } STATUS current DESCRIPTION "The group of objects obsoleted in release 9.0 of Nokia SROS series systems." ::= { tmnxPimNgGroups 27 } tmnxPimNgMvpnV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFGenMvpnCMcastSignal, vRtrPimNgAFGenMvpnGrpAddrMode, vRtrPimNgAFGenMvpnSpmsiAutoDisc, vRtrPimNgAFGenMvpnAD } STATUS current DESCRIPTION "The group of objects supporting PIM protocol MVPN feature on Nokia SROS series systems." ::= { tmnxPimNgGroups 28 } tmnxPimNgIfStatsV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfTxMdtSafi, vRtrPimNgIfRxMdtSafi, vRtrPimNgIfRxMdtSafiErrs } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interface statistics on Nokia SROS 9.0 series systems." ::= { tmnxPimNgGroups 29 } tmnxPimNgIfV10v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfP2mpLdpTreeJoin, vRtrPimNgIfExtranetType, vRtrPimNgIfExtranetMvpnId, vRtrPimNgRsvpPmsiIfType } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 10.0 series systems." ::= { tmnxPimNgGroups 30 } tmnxPimNgIfIPMSIV9v0Group OBJECT-GROUP OBJECTS { vRtrPimNgRsvpIPmsiExtTunlAdrType, vRtrPimNgRsvpIPmsiExtTunnelAddr, vRtrPimNgRsvpIPmsiLspName, vRtrPimNgRsvpIPmsiP2MPId, vRtrPimNgRsvpIPmsiTunnelId, vRtrPimNgLdpIPmsiRootAddrType, vRtrPimNgLdpIPmsiRootAddr, vRtrPimNgLdpIPmsiLspId, vRtrPimNgLdpIPmsiLspName } STATUS current DESCRIPTION "The group of objects supporting management of IPMSI interfaces on Nokia SROS 9.0 series systems." ::= { tmnxPimNgGroups 31 } tmnxPimNgMvpnV9v0R4Group OBJECT-GROUP OBJECTS { vRtrPimNgMvpnUMHPETblLastChg, vRtrPimNgMvpnUMHPERowStatus, vRtrPimNgMvpnUMHPELastChanged, vRtrPimNgMvpnUMHPEStandbyAdrTyp, vRtrPimNgMvpnUMHPEStandbyAddr, vRtrPimNgGrpSrcRpfSecNbrAddrTyp, vRtrPimNgGrpSrcRpfSecNbrAddr, vRtrPimNgGrpSrcRpfSecIfIndex, vRtrPimNgAFGenMdtDataGrpAddrMode, vRtrPimNgAFGenEnableAsmDataMdt } STATUS current DESCRIPTION "The group of objects supporting PIM protocol MVPN feature on version 9.0R4 Nokia SROS series systems." ::= { tmnxPimNgGroups 32 } tmnxPimNgGlobalGroupV10v0 OBJECT-GROUP OBJECTS { vRtrPimNgAfGenAutoRPDiscovery, vRtrPimNgAfGenSSMAsrtCompMode } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series systems." ::= { tmnxPimNgGroups 33 } tmnxPimNgIfStatsV10v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfRxAutoRpGenErrs, vRtrPimNgIfRxAutoRpAnnounce, vRtrPimNgIfTxAutoRpAnnounce, vRtrPimNgIfRxAutoRpAnnounceErrs, vRtrPimNgIfTxAutoRpAnnounceErrs, vRtrPimNgIfRxAutoRpMapping, vRtrPimNgIfTxAutoRpMapping, vRtrPimNgIfRxAutoRpMappingErrs, vRtrPimNgIfTxAutoRpMappingErrs } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interface statistics on Nokia SROS 10.0 series systems." ::= { tmnxPimNgGroups 34 } tmnxPimNgMvpnExtranetGroupV10v0 OBJECT-GROUP OBJECTS { vRtrPimNgMvpnExtranetRecvRefCnt } STATUS current DESCRIPTION "The group of objects supporting PIM protocol MVPN feature on Nokia SROS series systems." ::= { tmnxPimNgGroups 35 } tmnxPimNgGlobalGrpSrcV10v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGrpSrcAdvtAddrType, vRtrPimNgGrpSrcAdvtAddr } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 10.0 systems" ::= { tmnxPimNgGroups 37 } tmnxPimNgMVPNSndrRecvV11v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAfGenMdtType } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 11.0 systems." ::= { tmnxPimNgGroups 38 } tmnxPimNgFastFailover11v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAfGenMcastFastFailover, vRtrPimNgGrpSrcStdbyMRIBSrcFlags, vRtrPimNgGrpSrcStdbyUpJpState, vRtrPimNgGrpSrcStdbyUpJpTimer } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 11.0 systems." ::= { tmnxPimNgGroups 39 } tmnxPimNgInterASMvpnV11v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGenRpfVectorFlags, vRtrPimNgIfNeighborJASupport, vRtrPimNgIfRxJoinPrunesMvpnRpfv, vRtrPimNgIfTxJoinPrunesMvpnRpfv, vRtrPimNgIfRxInvalidJPMvpnRpfv, vRtrPimNgGrpSrcStdbyUpJpTimer, vRtrPimNgGrpSrcDSRpfvNbrType, vRtrPimNgGrpSrcDSRpfvNbr, vRtrPimNgGrpSrcDSRpfvProxyType, vRtrPimNgGrpSrcDSRpfvProxy, vRtrPimNgGrpSrcDSRpfvRD, vRtrPimNgGrpSrcDSRpfvType, vRtrPimNgGrpSrcUPRpfvNbrType, vRtrPimNgGrpSrcUPRpfvNbr, vRtrPimNgGrpSrcUPRpfvProxyType, vRtrPimNgGrpSrcUPRpfvProxy, vRtrPimNgGrpSrcUPRpfvRD, vRtrPimNgGrpSrcUPRpfvType, vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp, vRtrPimNgIfGrpSrcRpfvProxyAddr, vRtrPimNgIfGrpSrcRpfvRD, vRtrPimNgIfGrpSrcRpfvType, vRtrPimNgIfGrpSrcRpfvIfWinner, vRtrPimNgIfGrpSrcRpfvNbrWinner, vRtrPimNgGrpSrcRpfvFlags } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 11.0 systems." ::= { tmnxPimNgGroups 40 } tmnxPimNgCDV12v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgAFGenSourceAddressType, vRtrPimNgAFGenSourceAddress } STATUS current DESCRIPTION "The group of objects supporting Core Diversity feature on Nokia SROS series 12.0 systems." ::= { tmnxPimNgGroups 41 } tmnxPimNgMvpnSrcPrefixV12v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgMvpnSrcPrefixRowStatus, vRtrPimNgMvpnSrcPrefixRowLastChg, vRtrPimNgMvpnSrcPrefixTblLstChg, vRtrPimNgGrpSrcState, vRtrPimNgAfGenMvpnPersistSA } STATUS current DESCRIPTION "The group of objects supporting source selection per multicast group feature on Nokia SROS series 12.0 systems." ::= { tmnxPimNgGroups 42 } tmnxPimNgSgStatcExtrntV12v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgExtranetCDRowLstChg, vRtrPimNgExtranetCDTblLstChg, vRtrPimNgExtranetCDMvpnId, vRtrPimNgExtranetCDRowStatus, vRtrPimNgAFGenGrpPrefixAny } STATUS current DESCRIPTION "The group of objects supporting Core Diversity feature on Nokia SROS series 12.0 r4 systems." ::= { tmnxPimNgGroups 43 } tmnxPimNgNotifyObjsV12v0Group OBJECT-GROUP OBJECTS { vRtrPimNgNotifySourceAddrType, vRtrPimNgNotifySourceAddr, vRtrPimNgNotifyDescription } STATUS current DESCRIPTION "The group of objects added in the 12.0 release to support PIM notifications." ::= { tmnxPimNgGroups 44 } tmnxPimNgIfV12v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfMcacUseLagPortWeight } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces added in release 12.0 of Nokia SROS." ::= { tmnxPimNgGroups 45 } tmnxPimNgUnicastRtRemV12v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAfGenUnicastRtRemoval } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces added in release 12.0 of Nokia SROS." ::= { tmnxPimNgGroups 46 } tmnxPimNgMcastInbandSigV13v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgIfP2mpLdpTreeJoinType, vRtrPimNgAFGenMvpnOperCMcastSig } STATUS current DESCRIPTION "The group of objects supporting multicast inband signalling feature on Nokia SROS series 13.0 systems." ::= { tmnxPimNgGroups 47 } tmnxPimNgMulticastSpmsiV13v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgIfPmsiType, vRtrPimNgDataMtSpmsiAddRxThd, vRtrPimNgDataMtSpmsiDelRxThd, vRtrPimLdpPmsiCGrpSrcRxCount, vRtrPimRsvpPmsiCGrpSrcRxCount, vRtrPimLdpPmsiCGrpSrcRxThresEnbl, vRtrPimRsvpPmsiCGrpSrcRxThresEn } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements on Nokia SROS series 13.0 systems." ::= { tmnxPimNgGroups 48 } tmnxPimAsmExtranetV13v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgExtranetCDStarGFlag } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements on Nokia SROS series 13.0 systems." ::= { tmnxPimNgGroups 49 } tmnxPimNgIfV13v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfExtranetType, vRtrPimNgIfExtranetMvpnId, vRtrPimNgRsvpPmsiIfType } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 13.0 series systems." ::= { tmnxPimNgGroups 50 } tmnxPimNgObsoletedV13v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfP2mpLdpTreeJoin } STATUS current DESCRIPTION "The group of objects obsoleted in release 13.0 of Nokia SROS series systems." ::= { tmnxPimNgGroups 51 } tmnxPimNgIfV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfMcacIfPolicyName } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 14.0 series systems." ::= { tmnxPimNgGroups 52 } tmnxPimNgGenV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGenEcmpHashRebalance } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS 14.0 series systems." ::= { tmnxPimNgGroups 53 } tmnxPimNgDataMtPlcyV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgDataMtPlcyTblLstChg, vRtrPimNgDataMtPlcyLspTemplate, vRtrPimNgDataMtPlcyAdminState, vRtrPimNgDataMtPlcyRowStatus, vRtrPimNgDataMtPlcyRowLastChg, vRtrPimNgDataMtPlcySGTblLstChg, vRtrPimNgDataMtPlcySGRowStatus, vRtrPimNgDataMtPlcySGRowLstChg, vRtrPimNgRsvpPmsiOperState, vRtrPimNgRsvpPmsiMultiStreamId, vRtrPimNgLdpPmsiOperState, vRtrPimNgLdpPmsiMultiStreamId, vRtrPimNgGenMultiStreamSpmsi } STATUS current DESCRIPTION "The group of objects supporting management of Multistream SPMSI on Nokia SROS 14.0 series systems." ::= { tmnxPimNgGroups 54 } tmnxPimNgGenStatMdtsV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGenStatRxActvPsuedoMdts, vRtrPimNgGenStatTxMsActiveMdts } STATUS current DESCRIPTION "The object supports statistic counters for SPMSI on Nokia SROS 14.0 series systems." ::= { tmnxPimNgGroups 55 } tmnxPimNgDMAutoRpV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfGraftsRx, vRtrPimNgIfGraftsTx, vRtrPimNgIfGraftsRxErrors, vRtrPimNgIfGraftsAckRx, vRtrPimNgIfGraftsAckTx, vRtrPimNgIfGraftsAckRxErrors, vRtrPimNgIfRxAutoRpMappingRpfMM, vRtrPimNgIfRxAutoRpAnnounceRpfMM, vRtrPimNgGrpSrcMode, vRtrPimNgGrpSrcPruneLimitTimer, vRtrPimNgGrpSrcGraftRetryTimer } STATUS current DESCRIPTION "The group of objects supports statistic counters for PIM Dense Mode Auto RP feature on Nokia SROS 14.0 series systems." ::= { tmnxPimNgGroups 56 } tmnxPimNgNotifyObjsV14v0Group OBJECT-GROUP OBJECTS { vRtrPimNgNumGraftRetriesExcd } STATUS current DESCRIPTION "The group of objects added in the 14.0 release to support PIM notifications for PIM Dense Mode Auto RP feature." ::= { tmnxPimNgGroups 57 } tmnxPimNgNotificationV14v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrPimNgMaxGraftRetry } STATUS current DESCRIPTION "The group of notifications supporting PIM protocol for PIM Dense Mode Auto RP feature on 14.0 release of Nokia SROS series systems." ::= { tmnxPimNgGroups 58 } tmnxPimNgVRRPAwarePim15v0Group OBJECT-GROUP OBJECTS { vRtrPimNgAFIfOperGroup, vRtrPimNgAFIfOperGroupDPAction, vRtrPimNgAFIfOpGrpDeltaPriority } STATUS current DESCRIPTION "The group of objects supports VRRP Aware PIM feature on Nokia SROS 15.0 series systems." ::= { tmnxPimNgGroups 59 } tmnxPimNgDataMtPlcyV16v0Group OBJECT-GROUP OBJECTS { vRtrPimNgDataMtPlcyGrpAddrMode, vRtrPimNgDataMtPlcyGrpAddrType, vRtrPimNgDataMtPlcyGrpAddr, vRtrPimNgDataMtMultiStreamId } STATUS current DESCRIPTION "The group of objects supporting management of Multistream SPMSI for Rosen on Nokia SROS 16.0 series systems." ::= { tmnxPimNgGroups 60 } tmnxPimNgBIERV16v0Group OBJECT-GROUP OBJECTS { vRtrPimNgBierPmsiIfIndex, vRtrPimNgBierPmsiUptime, vRtrPimNgBierPmsiNumVpnSGs, vRtrPimNgBierPmsiIfType, vRtrPimNgBierPmsiOperState, vRtrPimNgBierPmsiMultiStreamId, vRtrPimBierPmsiCGrpSrcState, vRtrPimBierPmsiCGrpSrcJoinTimer, vRtrPimBierPmsiCGrpSrcHldDnTimer, vRtrPimBierPmsiCGrpSrcExpTimer, vRtrPimBierPmsiCGrpSrcUptime, vRtrPimBierDataMtCGrpSrcDataTh, vRtrPimBierPmsiCGrpSrcIfIndex, vRtrPimBierPmsiCGrpSrcRxThEnbl, vRtrPimBierPmsiCGrpSrcRxCount, vRtrPimNgBierIPmsiRootAddrType, vRtrPimNgBierIPmsiRootAddr, vRtrPimNgBierIPmsiSubDomainId, vRtrPimNgBierIPmsiMplsLbl, vRtrPimNgBierIPmsiBfrId } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 16.0 systems." ::= { tmnxPimNgGroups 61 } tmnxPimNgGlobalGroupV19v0 OBJECT-GROUP OBJECTS { vRtrPimNgGenBgpNhOverride } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 19.0 systems." ::= { tmnxPimNgGroups 62 } tmnxPimNgIfV19v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfBierSignalingType } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM interfaces on Nokia SROS 19.0 series systems." ::= { tmnxPimNgGroups 63 } tmnxPimNgSsmScalingV19v0Group OBJECT-GROUP OBJECTS { vRtrPimNgGenPimSsmScaling } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities for ssm scaling objects on Nokia SROS series 19.0 systems." ::= { tmnxPimNgGroups 64 } tmnxPimNgIfBierSigV19v0Group OBJECT-GROUP OBJECTS { vRtrPimNgIfBierSigTransportType } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities for ssm scaling objects on Nokia SROS series 19.0 systems." ::= { tmnxPimNgGroups 65 } tmnxPimNgIfTSidV19v0Group OBJECT-GROUP OBJECTS { vRtrPimNgTSidPmsiIfIndex, vRtrPimNgTSidPmsiUptime, vRtrPimNgTSidPmsiNumVpnSGs, vRtrPimNgTSidPmsiIfType, vRtrPimNgTSidPmsiOperState, vRtrPimNgTSidPmsiMultiStreamId, vRtrPimTSidPmsiCGrpSrcState, vRtrPimTSidPmsiCGrpSrcJoinTimer, vRtrPimTSidPmsiCGrpSrcHldDnTimer, vRtrPimTSidPmsiCGrpSrcExpTimer, vRtrPimTSidPmsiCGrpSrcUptime, vRtrPimTSidDataMtCGrpSrcDataTh, vRtrPimTSidPmsiCGrpSrcIfIndex, vRtrPimTSidPmsiCGrpSrcRxThEnbl, vRtrPimTSidPmsiCGrpSrcRxCount, vRtrPimNgTSidIPmsiRootAddrType, vRtrPimNgTSidIPmsiRootAddr, vRtrPimNgTSidIPmsiTreeIdx, vRtrPimNgTSidIPmsiLspName } STATUS current DESCRIPTION "The group of objects supporting manangement of extended PIM general capabilities for TREE SID objects on Nokia SROS series 19.0 systems." ::= { tmnxPimNgGroups 66 } tmnxPimNotifyObjsV19v0Group OBJECT-GROUP OBJECTS { vRtrPimNgNotifyBierInbInvSDId, vRtrPimNgNotifyBierInbInvBfrId, vRtrPimNgNotifyBierInbSAddrTyp, vRtrPimNgNotifyBierInbSAddr, vRtrPimNgNotifyBierInbGAddrTyp, vRtrPimNgNotifyBierInbGAddr, vRtrPimNgNotifyBierInbIAddrTyp, vRtrPimNgNotifyBierInbIAddr } STATUS current DESCRIPTION "The group of notification objects added in the 19.0 release to support PIM notifications for PIM BIER Inband feature." ::= { tmnxPimNgGroups 67 } tmnxPimNgNotificationV19v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrPimNgBierInbInvSD, vRtrPimNgBierInbInvBfrId } STATUS current DESCRIPTION "The group of notifications supporting PIM BIER inband feature in 19.0 release." ::= { tmnxPimNgGroups 68 } tmnxPimNgMulticastSpmsiV19v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgDataMtSpmsiStaticPlcy } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements on Nokia SROS series 19.0 systems." ::= { tmnxPimNgGroups 69 } tmnxPimNgGlobalGroupV20v0 OBJECT-GROUP OBJECTS { vRtrPimNgGenMtuOverHead } STATUS current DESCRIPTION "The group of objects supporting management of extended PIM general capabilities on Nokia SROS series 20.0 systems." ::= { tmnxPimNgGroups 70 } tmnxPimNgMulticastSpmsiV20v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgIfPmsiType } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements on Nokia SROS series 20.0 systems." ::= { tmnxPimNgGroups 71 } tmnxPimNgMsSpmsiTreeSidV20v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgDataMtSpmsiSRPlcy } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements for Tree Sid feature on Nokia SROS series 20.0 systems." ::= { tmnxPimNgGroups 72 } tmnxPimNgAfGenAutoRPV20v0Grp OBJECT-GROUP OBJECTS { vRtrPimNgAfGenAutoRPCandidate, vRtrPimNgAfGenAutoRPMappingAgent, vRtrPimNgAfGenAutoRPMAIUAddrType, vRtrPimNgAfGenAutoRPMAIUAddress } STATUS current DESCRIPTION "The group of objects supporting the multicast enhancements for auto-rp feature on Nokia SROS series 20.0 systems." ::= { tmnxPimNgGroups 73 } vRtrPimNgNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 50 } vRtrPimNgNotifications OBJECT IDENTIFIER ::= { vRtrPimNgNotifyPrefix 0 } vRtrPimNgIfNeighborLoss NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfNeighborUpTime } STATUS current DESCRIPTION "A vRtrPimNgIfNeighborLoss notification is generated when the PIM adjacency with a neighbor is lost." ::= { vRtrPimNgNotifications 1 } vRtrPimNgIfNeighborUp NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfNeighborUpTime } STATUS current DESCRIPTION "A vRtrPimNgIfNeighborUp notification is generated when the PIM adjacency with a new neighbor is established." ::= { vRtrPimNgNotifications 2 } vRtrPimNgInvalidJoinPrune NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfRxInvalidJoinPrunes, vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifyRPAddrType, vRtrPimNgNotifyRPAddr, vRtrPimNgNotifyWrongRPAddrType, vRtrPimNgNotifyWrongRPAddr } STATUS current DESCRIPTION "A vRtrPimNgInvalidJoinPrune notification is generated when an invalid Join Prune message is received. A Join Prune message is deemed invalid when there is an RP address disagreement between the router and the PIM Join Prune message." ::= { vRtrPimNgNotifications 3 } vRtrPimNgInvalidRegister NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfRxInvalidRegisters, vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifyRPAddrType, vRtrPimNgNotifyRPAddr, vRtrPimNgNotifyWrongRPAddrType, vRtrPimNgNotifyWrongRPAddr } STATUS current DESCRIPTION "A vRtrPimNgInvalidRegister notification is generated when an invalid PIM Register message is received. A Register message is deemed invalid when there is an RP address disagreement between the router and the PIM Register message." ::= { vRtrPimNgNotifications 4 } vRtrPimNgGrpInSSMRange NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfRxPkts, vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifyMsgType } STATUS current DESCRIPTION "A vRtrPimNgGrpInSSMRange notification is generated when the router receives a register message, a (*,G) assert message, a (*,G) Join Prune message or a IGMP local membership message for the group defined in the SSM address range." ::= { vRtrPimNgNotifications 5 } vRtrPimNgBSRStateChange NOTIFICATION-TYPE OBJECTS { vRtrPimNgAFGenBSRState } STATUS current DESCRIPTION "A vRtrPimNgBSRStateChange notification is generated whenever there is a change in the BSR state on the router. vRtrPimNgAFGenBSRState will indicate the current BSR state." ::= { vRtrPimNgNotifications 6 } vRtrPimNgHelloDropped NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfNeighborUpTime } STATUS current DESCRIPTION "A vRtrPimNgHelloDropped notification is generated whenever a hello is dropped because the vRtrPimNgIfMulticastSenders flag is set to 'always'. " ::= { vRtrPimNgNotifications 7 } vRtrPimNgSGLimitExceeded NOTIFICATION-TYPE OBJECTS { tmnxCardHwIndex } STATUS current DESCRIPTION "A vRtrPimNgSGLimitExceeded notification is generated when a (S,G) record is failed to be programmed to an IOM because the supported (S,G) limit is exceeded. This limit is currently at 16000 (S,G) entries." ::= { vRtrPimNgNotifications 8 } vRtrPimNgReplicationLmtExceeded NOTIFICATION-TYPE OBJECTS { vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, tmnxCardHwIndex } STATUS current DESCRIPTION "A vRtrPimNgReplicationLmtExceeded notification is generated when an IOM fails to program an OIF for an (S,G) record because the replication limit for that (S,G) on that IOM has been reached. The replication limit per (S,G) entry on an IOM is currently 127." ::= { vRtrPimNgNotifications 9 } vRtrPimNgMDTLimitExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrPimNgGenMaxMdts } STATUS current DESCRIPTION "A vRtrPimNgMDTLimitExceeded notification is generated when the configuration exceeds the maximum number of Multicast Distribution Trees (MDTs) supported on the system." ::= { vRtrPimNgNotifications 10 } vRtrPimNgMaxGrpsLimitExceeded NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfMaxGroups } STATUS current DESCRIPTION "The vRtrPimNgMaxGrpsLimitExceeded event is generated when an attempt is made to configure a group when vRtrPimNgAFIfCurrentGroups, the number of groups configured on the PIM interface, is equal to vRtrPimNgIfMaxGroups, the maximum number of groups supported on the system." ::= { vRtrPimNgNotifications 11 } vRtrPimNgDataMtReused NOTIFICATION-TYPE OBJECTS { vRtrPimNgDataMtIfIndex, vRtrPimNgDataMtNumVpnSGs } STATUS current DESCRIPTION "The vRtrPimNgDataMtReused event is generated when a data MDT is reused, i.e. a C (S,G) is mapped to a data MDT that is already in use by another C (S,G)." ::= { vRtrPimNgNotifications 12 } vRtrPimNgMcacPlcyDropped NOTIFICATION-TYPE OBJECTS { vRtrPimNgIfMcacPolicyName, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifySourceAddrType, vRtrPimNgNotifySourceAddr, vRtrPimNgNotifyDescription } STATUS current DESCRIPTION "The vRtrPimNgMcacPlcyDropped event is generated when a PIM group is dropped on a given interface because of applying a multicast CAC policy given by vRtrPimNgIfMcacPolicyName." ::= { vRtrPimNgNotifications 13 } vRtrPimNgInvalidIPmsiTunnel NOTIFICATION-TYPE OBJECTS { vRtrPimNgAFGenMdtDefGrpAddrType, vRtrPimNgAFGenMdtDefGrpAddress, vRtrPimNgNotifySourceIpType, vRtrPimNgNotifySourceIp, vRtrPimNgWrongMdtDefGrpAddrType, vRtrPimNgWrongMdtDefGrpAddr, vRtrPimNgWrongPmsiType, vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId, vRtrPimNgWrongPmsiExtTunlAdrTyp, vRtrPimNgWrongPmsiExtTunlAddr, vRtrPimNgWrongVprnId, vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp, vRtrPimNgWrongPmsiSenderAddr } STATUS current DESCRIPTION "[CAUSE1] The vRtrPimNgInvalidIPmsiTunnel event is generated when an invalid default core group address specified by vRtrPimNgWrongMdtDefGrpAddr of the Multicast Distribution Tree(MDT) is received in PIM message from vRtrPimNgNotifySourceIp, instead of the expected address specified by vRtrPimNgAFGenMdtDefGrpAddress. It is considered to be a misconfiguration and the message will be dropped. This trap is intended to help network operators recognize the misconfiguration and adjust their configurations accordingly. [CAUSE2] This event is also generated when the tunnel type specified by vRtrPimNgWrongPmsiType is received in PIM message from vRtrPimNgNotifySourceIp which is different from the configured tunnel type. [EFFECT] The PMSI received in the PIM message from vRtrPimNgNotifySourceIp is not processed by PIM. [RECOVERY]: Operator needs to look and adjust the configuration of vRtrPimNgNotifySourceIp in the VPRN specified by vRtrPimNgWrongVprnId. The objects vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId and vRtrPimNgWrongPmsiExtTunlAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is 'rsvp (2)'. The objects vRtrPimNgWrongMdtDefGrpAddrType and vRtrPimNgWrongMdtDefGrpAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is either 'pimSsm (0)' or 'pimSm (1)'. The objects vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp and vRtrPimNgWrongPmsiSenderAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is 'ldp (3)'." ::= { vRtrPimNgNotifications 14 } vRtrPimNgMaxGraftRetry NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrPimNgNotifyGroupAddrType, vRtrPimNgNotifyGroupAddr, vRtrPimNgNotifySourceAddrType, vRtrPimNgNotifySourceAddr, vRtrPimNgNumGraftRetriesExcd } STATUS current DESCRIPTION "[CAUSE] The vRtrPimNgMaxGraftRetry is generated when the number of graft retries has exceeded 10. [EFFECT] We will stop retrying sending of graft messages and remain in ack-pending state. [RECOVERY] The recovery is caused by a subsequent graft ack or data which will move the state to forwarding." ::= { vRtrPimNgNotifications 15 } vRtrPimNgBierInbInvSD NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrPimNgNotifyBierInbInvSDId, vRtrPimNgNotifyBierInbSAddrTyp, vRtrPimNgNotifyBierInbSAddr, vRtrPimNgNotifyBierInbGAddrTyp, vRtrPimNgNotifyBierInbGAddr, vRtrPimNgNotifyBierInbIAddrTyp, vRtrPimNgNotifyBierInbIAddr } STATUS current DESCRIPTION "[CAUSE] The vRtrPimNgBierInbInvSD is generated when PIM receives a JP Pdu with unsupported sub-domain id. [EFFECT] PIM will stop processing the Join/Prune PDU. [RECOVERY] The operator must ensure that downstream routers must have the same sub-domain id. " ::= { vRtrPimNgNotifications 16 } vRtrPimNgBierInbInvBfrId NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrPimNgNotifyBierInbInvBfrId, vRtrPimNgNotifyBierInbSAddrTyp, vRtrPimNgNotifyBierInbSAddr, vRtrPimNgNotifyBierInbGAddrTyp, vRtrPimNgNotifyBierInbGAddr, vRtrPimNgNotifyBierInbIAddrTyp, vRtrPimNgNotifyBierInbIAddr } STATUS current DESCRIPTION "[CAUSE] The vRtrPimNgBierInbInvSD is generated when PIM receives a JP PDU with unsupported BFR id. [EFFECT] PIM will stop processing the Join/Prune PDU. [RECOVERY] The operator must ensure that downstream routers must have the bfr-id within 1..4096 range. " ::= { vRtrPimNgNotifications 17 } END