-- These MIBs were created on 02/04/2004
-- This module defines enterprise  MIBs for VPN tunnel monitoring
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.
--

NETSCREEN-VPN-MON-SA-COUNT-MIB DEFINITIONS ::= BEGIN
IMPORTS

    DisplayString 	FROM RFC1213-MIB 
    netscreenVpn 	FROM NETSCREEN-SMI
    netscreenVpnMon	FROM NETSCREEN-VPN-MON-MIB;
   

-- MODULE-IDENTITY
--  OrgName
--    Juniper Networks, Inc.
--  ContactInfo
--     Customer Support
--     
--     1194 North Mathilda Avenue 
--     Sunnyvale, California 94089-1206
--     USA
--     
--     Tel: 1-800-638-8296
--     E-mail: customerservice@juniper.net
--     HTTP://www.juniper.net"
--
--  Descr
--    This module defines the object that are used to monitor SA count
--    
-- Last modified date: 07/08/2004
--    Added in and out SA counters
--
-- Last modified date: 06/14/2004
--    Modified copyright and contact info         
-- 
-- Last modified date: 02/04/2004
-- 
    
          nsVpnMonSACountTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF NsVpnMonSACountEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "A list of SA count entries. "
              ::= { netscreenVpnMon 2 }

          nsVpnMonSACountEntry OBJECT-TYPE
              SYNTAX  NsVpnMonSACountEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "A SA count entry"
              INDEX   { nsVpnMonSACountType }
              ::= { nsVpnMonSACountTable 1 }

          NsVpnMonSACountEntry ::=
              SEQUENCE {
                  nsVpnMonSACountType
                      INTEGER,
                  nsVpnMonSACountTotal
                      Counter,
                  nsVpnMonSACountAct
                      Counter,
                  nsVpnMonSACountInTotal
                      Counter,
                  nsVpnMonSACountInAct
                      Counter,
                  nsVpnMonSACountOutTotal
                      Counter,
                  nsVpnMonSACountOutAct
                      Counter
            }
            
          nsVpnMonSACountType OBJECT-TYPE
              SYNTAX  INTEGER {
                ipv4(1),
                ipv6(2)
              }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The SA Count type (ipv4(1) or ipv6(2))" 
              ::= { nsVpnMonSACountEntry 1 }

          nsVpnMonSACountTotal OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total count of SA" 
              ::= { nsVpnMonSACountEntry 2 }

          nsVpnMonSACountAct OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The active SA Count."
              ::= { nsVpnMonSACountEntry 3 }

          nsVpnMonSACountInTotal OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The in total SA count" 
              ::= { nsVpnMonSACountEntry 4 }

          nsVpnMonSACountInAct OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The in active SA Count"
              ::= { nsVpnMonSACountEntry 5 }

          nsVpnMonSACountOutTotal OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The out total SA count" 
              ::= { nsVpnMonSACountEntry 6 }

          nsVpnMonSACountOutAct OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The out active SA Count."
              ::= { nsVpnMonSACountEntry 7 }


           

END