-- -- ASN.1 MIB Definitions -- Output Date: Tue Jul 12 15:00:04 2016 -- IPE-COMMON-MIB DEFINITIONS ::= BEGIN ----------------------------------------------- -- IMPORTS Definitions ----------------------------------------------- IMPORTS BridgeId FROM BRIDGE-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB Counter32, Counter64, enterprises, Gauge32, Integer32, IpAddress, NOTIFICATION-TYPE, OBJECT-TYPE, Opaque, Unsigned32 FROM SNMPv2-SMI DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC; ----------------------------------------------- -- Textual Convention Definitions ----------------------------------------------- AlarmTypeValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm Type (CCITT Rec. X.733)" SYNTAX INTEGER { invalid(0), communicationsAlarm(1), qualityOfServiceAlarm(2), processingErrorAlarm(3), equipmentAlarm(4), environmentalAlarm(5), integrityViolationAlarm(6), operationalViolationAlarm(7), physicalViolationAlarm(8), securityViolationAlarm(9), timeDomainViolationAlarm(10) } EnableDisableValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/Disable Type" SYNTAX INTEGER { invalid(0), disable(1), enable(2) } IpeMepId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Administrative MEP ID value. This value is not same as MEP ID in protocol sense." SYNTAX Integer32 (1..128) IpeStatsInfo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "PMON/RMON monitoring status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." SYNTAX INTEGER { invalid(0), validNoMaint(1), validMaint(2), invalidNoMaint(3), invalidMaint(4) } IpeVlanIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "VLAN ID. Value '4095' is reserved, and cannot set to the system." SYNTAX Integer32 (1..4094) IpeVlanIndexOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "VLAN ID. Value '4095' is reserved, and cannot set to the system. Value '0' is special value, and the definition depends on the object which uses this TEXTUAL-CONVENTION." SYNTAX Integer32 (0..4094) IpeVlanListOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "VLAN List. Each octet represents a set of eight VIDs. The first octet specifying VID 1 through 8, the second octet specifying VID 9 through 16, etc. If that bit has a value of '1' then that VID is included in the set of VIDs; the VID is not included if its bit has a value of '0'." SYNTAX OCTET STRING (SIZE(0..0|512..512)) OffOnValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Off/On Type" SYNTAX INTEGER { invalid(0), off(1), on(2) } ProbableCauseValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Probable Cause (CCITT Rec. X.733)" SYNTAX INTEGER { invalid(0), aIS(1), callSetUpFailure(2), degradedSignal(3), farEndReceiverFailure(4), framingError(5), lossOfFrame(6), lossOfPointer(7), lossOfSignal(8), payloadTypeMismatch(9), transmissionError(10), remoteAlarmInterface(11), excessiveBER(12), pathTraceMismatch(13), unavailable(14), signalLabelMismatch(15), lossOfMultiFrame(16), receiveFailure(17), transmitFailure(18), modulationFailure(19), demodulationFailure(20), broadcastChannelFailure(21), connectionEstablishmentError(22), invalidMessageReceived(23), localNodeTransmissionError(24), remoteNodeTransmissionError(25), routingFailure(26), backplaneFailure(51), dataSetProblem(52), equipmentIdentifierDuplication(53), externalIFDeviceProblem(54), lineCardProblem(55), multiplexerProblem(56), nEIdentifierDuplication(57), powerProblem(58), processorProblem(59), protectionPathFailure(60), receiverFailure(61), replaceableUnitMissing(62), replaceableUnitTypeMismatch(63), synchronizationSourceMismatch(64), terminalProblem(65), timingProblem(66), transmitterFailure(67), trunkCardProblem(68), replaceableUnitProblem(69), realTimeClockFailure(70), antennaFailure(71), batteryChargingFailure(72), diskFailure(73), frequencyHoppingFailure(74), iODeviceError(75), lossOfSynchronisation(76), lossOfRedundancy(77), powerSupplyFailure(78), signalQualityEvaluationFailure(79), tranceiverFailure(80), protectionMechanismFailure(81), protectingResourceFailure(82), airCompressorFailure(101), airConditioningFailure(102), airDryerFailure(103), batteryDischarging(104), batteryFailure(105), commercialPowerFailure(106), coolingFanFailure(107), engineFailure(108), fireDetectorFailure(109), fuseFailure(110), generatorFailure(111), lowBatteryThreshold(112), pumpFailure(113), rectifierFailure(114), rectifierHighVoltage(115), rectifierLowFVoltage(116), ventilationsSystemFailure(117), enclosureDoorOpen(118), explosiveGas(119), fire(120), flood(121), highHumidity(122), highTemperature(123), highWind(124), iceBuildUp(125), intrusionDetection(126), lowFuel(127), lowHumidity(128), lowCablePressure(129), lowTemperatue(130), lowWater(131), smoke(132), toxicGas(133), coolingSystemFailure(134), externalEquipmentFailure(135), externalPointFailure(136), storageCapacityProblem(151), memoryMismatch(152), corruptData(153), outOfCPUCycles(154), sfwrEnvironmentProblem(155), sfwrDownloadFailure(156), lossOfRealTimel(157), applicationSubsystemFailure(158), configurationOrCustomisationError(159), databaseInconsistency(160), fileError(161), outOfMemory(162), softwareError(163), timeoutExpired(164), underlayingResourceUnavailable(165), versionMismatch(166), bandwidthReduced(201), congestion(202), excessiveErrorRate(203), excessiveResponseTime(204), excessiveRetransmissionRate(205), reducedLoggingCapability(206), systemResourcesOverload(207), adapterError(500), applicationSubsystemFailture(501), bandwidthReducedX733(502), callEstablishmentError(503), communicationsProtocolError(504), communicationsSubsystemFailure(505), configurationOrCustomizationError(506), congestionX733(507), coruptData(508), cpuCyclesLimitExceeded(509), dataSetOrModemError(510), degradedSignalX733(511), dteDceInterfaceError(512), enclosureDoorOpenX733(513), equipmentMalfunction(514), excessiveVibration(515), fileErrorX733(516), fireDetected(517), framingErrorX733(518), heatingVentCoolingSystemProblem(519), humidityUnacceptable(520), inputOutputDeviceError(521), inputDeviceError(522), lanError(523), leakDetected(524), localNodeTransmissionErrorX733(525), lossOfFrameX733(526), lossOfSignalX733(527), materialSupplyExhausted(528), multiplexerProblemX733(529), outOfMemoryX733(530), ouputDeviceError(531), performanceDegraded(532), powerProblems(533), pressureUnacceptable(534), processorProblems(535), pumpFailureX733(536), queueSizeExceeded(537), receiveFailureX733(538), receiverFailureX733(539), remoteNodeTransmissionErrorX733(540), resourceAtOrNearingCapacity(541), responseTimeExecessive(542), retransmissionRateExcessive(543), softwareErrorX733(544), softwareProgramAbnormallyTerminated(545), softwareProgramError(546), storageCapacityProblemX733(547), temperatureUnacceptable(548), thresholdCrossed(549), timingProblemX733(550), toxicLeakDetected(551), transmitFailureX733(552), transmiterFailure(553), underlyingResourceUnavailable(554), versionMismatchX733(555), authenticationFailure(600), breachOfConfidentiality(601), cableTamper(602), delayedInformation(603), denialOfService(604), duplicateInformation(605), informationMissing(606), informationModificationDetected(607), informationOutOfSequence(608), keyExpired(609), nonRepudiationFailure(610), outOfHoursActivity(611), outOfService(612), proceduralError(613), unauthorizedAccessAttempt(614), unexpectedInformation(615), other(1024) } ReportNotreportValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/Disable Type" SYNTAX INTEGER { invalid(0), notReport(1), report(2) } SeverityValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Severity (CCITT Rec. X.733)" SYNTAX INTEGER { cleared(1), indetermine(2), critical(3), major(4), minor(5), warning(6) } UsedNotusedValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used/NotUsed Type" SYNTAX INTEGER { invalid(0), notUsed(1), used(2) } ValidInvalidValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid/Invalid Type" SYNTAX INTEGER { invalid(0), valid(1) } ----------------------------------------------- -- Begin User MIB Object Definitions ----------------------------------------------- nec OBJECT IDENTIFIER ::= { enterprises 119 } nec-mib OBJECT IDENTIFIER ::= { nec 2 } necProductDepend OBJECT IDENTIFIER ::= { nec-mib 3 } radioEquipment OBJECT IDENTIFIER ::= { necProductDepend 69 } pasoNeoIpe-common OBJECT IDENTIFIER ::= { radioEquipment 501 } ----------------------------------------------- -- IPE COMMON Group Definitions ----------------------------------------------- summaryGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 1 } trapGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 2 } alarmStatusGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 3 } equipmentSetUpGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 4 } provisioningGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 5 } maintenanceGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 6 } inventoryGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 7 } meteringGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 8 } pmonGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 9 } pmonTxRxLevGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 10 } rmonGroup OBJECT IDENTIFIER ::= { pasoNeoIpe-common 11 } ----------------------------------------------- -- summaryGroup Definitions ----------------------------------------------- alarmSummaryGroup OBJECT IDENTIFIER ::= { summaryGroup 1 } alarmSummaryCommonInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryCommonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summary Table. Alarm Summary objects represents the maximum severity value of raised alarms of the entity." ::= { alarmSummaryGroup 1 } alarmSummaryCommonInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryCommonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryCommonInfoIndex } ::= { alarmSummaryCommonInfoTable 1 } AlarmSummaryCommonInfoEntry ::= SEQUENCE { alarmSummaryCommonInfoIndex Integer32, alarmSummaryCommonInfoNEAddress IpAddress, alarmTotalSummary SeverityValue, alarmIduSummary SeverityValue, alarmCtrlSummary SeverityValue, alarmOduSummary SeverityValue, alarmAuxInputSummary SeverityValue, alarmPmonTcnSummary SeverityValue, alarmRmonTcnSummary SeverityValue, alarmRmonTcnCtrlSummary SeverityValue } alarmSummaryCommonInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryCommonInfoEntry 1 } alarmSummaryCommonInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryCommonInfoEntry 2 } alarmTotalSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Total Summary Alarm." ::= { alarmSummaryCommonInfoEntry 3 } alarmIduSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "IDU Summary Alarm." ::= { alarmSummaryCommonInfoEntry 4 } alarmCtrlSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Summary Alarm (including Equipment clock alarms)" ::= { alarmSummaryCommonInfoEntry 5 } alarmOduSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Summary Alarm." ::= { alarmSummaryCommonInfoEntry 6 } alarmAuxInputSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Input Summary Alarm." ::= { alarmSummaryCommonInfoEntry 7 } alarmPmonTcnSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "PMON TCN Summary Alarm." ::= { alarmSummaryCommonInfoEntry 8 } alarmRmonTcnSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON TCN Summary Alarm." ::= { alarmSummaryCommonInfoEntry 9 } alarmRmonTcnCtrlSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON TCN Main Board / Ctrl Card Summary Alarm." ::= { alarmSummaryCommonInfoEntry 10 } alarmSummaryIduGroup OBJECT IDENTIFIER ::= { alarmSummaryGroup 2 } alarmSummaryIduSlotInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryIduSlotInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summary per IDU Slot." ::= { alarmSummaryIduGroup 1 } alarmSummaryIduSlotInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryIduSlotInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryIduSlotInfoIndex } ::= { alarmSummaryIduSlotInfoTable 1 } AlarmSummaryIduSlotInfoEntry ::= SEQUENCE { alarmSummaryIduSlotInfoIndex Integer32, alarmSummaryIduSlotInfoNEAddress IpAddress, alarmIduSlotSummary SeverityValue } alarmSummaryIduSlotInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryIduSlotInfoEntry 1 } alarmSummaryIduSlotInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryIduSlotInfoEntry 2 } alarmIduSlotSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "IDU Slot Summary Alarm. the maximum severity value of raised alarms per slot." ::= { alarmSummaryIduSlotInfoEntry 3 } alarmSummaryIduSwGrpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryIduSwGrpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summary per MODEM Switch group." ::= { alarmSummaryIduGroup 2 } alarmSummaryIduSwGrpInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryIduSwGrpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryIduSwGrpInfoIndex } ::= { alarmSummaryIduSwGrpInfoTable 1 } AlarmSummaryIduSwGrpInfoEntry ::= SEQUENCE { alarmSummaryIduSwGrpInfoIndex Integer32, alarmSummaryIduSwGrpInfoNEAddress IpAddress, alarmIduSwGrpSummary SeverityValue } alarmSummaryIduSwGrpInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryIduSwGrpInfoEntry 1 } alarmSummaryIduSwGrpInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryIduSwGrpInfoEntry 2 } alarmIduSwGrpSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "IDU SW Group Summary Alarm. the maximum severity value of raised alarms per MODEM Switch group." ::= { alarmSummaryIduSwGrpInfoEntry 3 } alarmSummaryOduInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryOduInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summary per ODU." ::= { alarmSummaryGroup 3 } alarmSummaryOduInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryOduInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryOduInfoIndex } ::= { alarmSummaryOduInfoTable 1 } AlarmSummaryOduInfoEntry ::= SEQUENCE { alarmSummaryOduInfoIndex Integer32, alarmSummaryOduInfoNEAddress IpAddress, alarmOduEachSummary SeverityValue } alarmSummaryOduInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryOduInfoEntry 1 } alarmSummaryOduInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryOduInfoEntry 2 } alarmOduEachSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Each Summary Alarm. the maximum severity value of raised alarms per ODU." ::= { alarmSummaryOduInfoEntry 3 } alarmSummaryPmonTcnInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryPmonTcnInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summay of Threshold Crossing Alarms per Slot." ::= { alarmSummaryGroup 4 } alarmSummaryPmonTcnInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryPmonTcnInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryPmonTcnInfoIndex } ::= { alarmSummaryPmonTcnInfoTable 1 } AlarmSummaryPmonTcnInfoEntry ::= SEQUENCE { alarmSummaryPmonTcnInfoIndex Integer32, alarmSummaryPmonTcnInfoNEAddress IpAddress, alarmPmonTcnSlotSummary SeverityValue } alarmSummaryPmonTcnInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryPmonTcnInfoEntry 1 } alarmSummaryPmonTcnInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryPmonTcnInfoEntry 2 } alarmPmonTcnSlotSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "PMON (TCN) Slot Summary Alarm. the maximum severity value of raised Threshold Crossing Alarms per slot." ::= { alarmSummaryPmonTcnInfoEntry 3 } alarmSummaryCtrlInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryCtrlInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm Summary of Main Board or Ctrl Card." ::= { alarmSummaryGroup 5 } alarmSummaryCtrlInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryCtrlInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryEoamInfoIndex } ::= { alarmSummaryCtrlInfoTable 1 } AlarmSummaryCtrlInfoEntry ::= SEQUENCE { alarmSummaryEoamInfoIndex Integer32, alarmSummaryEoamInfoNEAddress IpAddress, alarmEoamSummary SeverityValue, alarmRmonEoamSummary SeverityValue } alarmSummaryEoamInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryCtrlInfoEntry 1 } alarmSummaryEoamInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryCtrlInfoEntry 2 } alarmEoamSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-OAM including MPLS-TP OAM Summary Alarm. The maximum severity value of raised alarms which are related to EtherOAM functions." ::= { alarmSummaryCtrlInfoEntry 3 } alarmRmonEoamSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON ETH-OAM including MPLS-TP OAM Summary Alarm. The maximum severity value of raised alarms which are related to EtherOAM Threshold Crossing Alarms." ::= { alarmSummaryCtrlInfoEntry 4 } alarmSummaryRmonTcnInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmSummaryRmonTcnInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm summary of RMON Threshold Crossing Alarms per slot." ::= { alarmSummaryGroup 6 } alarmSummaryRmonTcnInfoEntry OBJECT-TYPE SYNTAX AlarmSummaryRmonTcnInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmSummaryRmonTcnInfoIndex } ::= { alarmSummaryRmonTcnInfoTable 1 } AlarmSummaryRmonTcnInfoEntry ::= SEQUENCE { alarmSummaryRmonTcnInfoIndex Integer32, alarmSummaryRmonTcnInfoNEAddress IpAddress, alarmRmonTcnSlotSummary SeverityValue } alarmSummaryRmonTcnInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { alarmSummaryRmonTcnInfoEntry 1 } alarmSummaryRmonTcnInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { alarmSummaryRmonTcnInfoEntry 2 } alarmRmonTcnSlotSummary OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON (TCN) Slot Summary Alarm. The maximum value of raised alarms which are related RMON Threshold Crossing Alarm." ::= { alarmSummaryRmonTcnInfoEntry 3 } maintSummaryGroup OBJECT IDENTIFIER ::= { summaryGroup 2 } maintSummaryCommonInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintSummaryCommonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the status of maintenance functions." ::= { maintSummaryGroup 1 } maintSummaryCommonInfoEntry OBJECT-TYPE SYNTAX MaintSummaryCommonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintSummaryCommonInfoIndex } ::= { maintSummaryCommonInfoTable 1 } MaintSummaryCommonInfoEntry ::= SEQUENCE { maintSummaryCommonInfoIndex Integer32, maintSummaryCommonInfoNEAddress IpAddress, maintTotalSummary OffOnValue } maintSummaryCommonInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintSummaryCommonInfoEntry 1 } maintSummaryCommonInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintSummaryCommonInfoEntry 2 } maintTotalSummary OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "Maintenance Total Summary. Represents the status of maintenance functions. 'on' means some maintenance functions are performed on this equipment." ::= { maintSummaryCommonInfoEntry 3 } ----------------------------------------------- -- trapGroup Definitions ----------------------------------------------- ipeTrapCommon OBJECT IDENTIFIER ::= { trapGroup 1 } ipeTrapCommonVars OBJECT IDENTIFIER ::= { ipeTrapCommon 1 } eventTotalCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of SNMP TRAP/INFORM messages since this equipment was booted" ::= { ipeTrapCommonVars 1 } eventCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of SNMP TRAP/INFORM messages per event type (alarm/status/control) since this equipment was booted." ::= { ipeTrapCommonVars 2 } eventTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The local date and time when the TRAP/INFORM event occurred." ::= { ipeTrapCommonVars 3 } eventType OBJECT-TYPE SYNTAX INTEGER { alarmStateChage(1), statusChange(2), controlEvent(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The event type of TRAP/INFORM message." ::= { ipeTrapCommonVars 4 } eventResourceID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The OBJECT IDENTIFIER of the object which raised the event." ::= { ipeTrapCommonVars 5 } ipeTrapCommonAdditionalVars OBJECT IDENTIFIER ::= { ipeTrapCommon 2 } eventAdditionalText1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional Information about the TRAP/INFORM event." ::= { ipeTrapCommonAdditionalVars 1 } eventAdditionalText2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional Information about the TRAP/INFORM event." ::= { ipeTrapCommonAdditionalVars 2 } eventAdditionalText3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional Information about the TRAP/INFORM event." ::= { ipeTrapCommonAdditionalVars 3 } eventAdditionalText4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional Information about the TRAP/INFORM event." ::= { ipeTrapCommonAdditionalVars 4 } eventAdditionalText5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional Information about the TRAP/INFORM event." ::= { ipeTrapCommonAdditionalVars 5 } ipeTrapAlarmVars OBJECT IDENTIFIER ::= { ipeTrapCommon 3 } eventSeverity OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Severity value of notified alarm event." ::= { ipeTrapAlarmVars 1 } eventAlarmType OBJECT-TYPE SYNTAX AlarmTypeValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the X.733 based event type value for the alarms." ::= { ipeTrapAlarmVars 2 } eventProbableCause OBJECT-TYPE SYNTAX ProbableCauseValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the X.733 based probable cause value for the alarms." ::= { ipeTrapAlarmVars 3 } ipeTrapStatusValueVars OBJECT IDENTIFIER ::= { ipeTrapCommon 4 } eventStatusValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of status object whose syntax is integer. Event object is represented by 'eventResourceID'" ::= { ipeTrapStatusValueVars 1 } eventStatusValueDspStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of status object whose syntax is DISPLAY STRING. Event object is represented by 'eventResourceID'" ::= { ipeTrapStatusValueVars 2 } eventStatusValueOctStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512|32..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of status object whose syntax is OCTET STRING. Event object is represented by 'eventResourceID' SYNTAX: OCTET STRING (SIZE(32..32)) [iPASOLINK200/400/1000series/EX/iX], OCTET STRING (SIZE(0..512)) [iPASOLINK VR series]" ::= { ipeTrapStatusValueVars 3 } eventStatusValueUnsigned32 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of status object whose syntax is unsigned32. Event object is represented by 'eventResourceID'" ::= { ipeTrapStatusValueVars 4 } ipeTrapControlValueVars OBJECT IDENTIFIER ::= { ipeTrapCommon 5 } eventControlValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of control event whose syntax is integer32. Event object is represented by 'eventResourceID'" ::= { ipeTrapControlValueVars 1 } eventControlValueDspStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of control event whose syntax is DISPLAY STRING. Event object is represented by 'eventResourceID'" ::= { ipeTrapControlValueVars 2 } eventControlValueOctStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of control event whose syntax is OCTET STRING. Event object is represented by 'eventResourceID'" ::= { ipeTrapControlValueVars 3 } eventControlValueUnsigned32 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the changed value of control event whose syntax is Unsigned32. Event object is represented by 'eventResourceID'" ::= { ipeTrapControlValueVars 4 } ipeTrapControlVars OBJECT IDENTIFIER ::= { ipeTrapCommon 6 } eventRecordUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the user name who triggered the control event. In SNMPv1/v2 cases, this object reports 'unknown' unless 'ipeAccessUserName' is set within the SNMP SET PDU. In SNMPv3 cases, this object reports user name which is specified in SET-REQUEST." ::= { ipeTrapControlVars 1 } eventRecordAccessType OBJECT-TYPE SYNTAX INTEGER { invalid(0), nms(1), webLct(2), cli(3), internal(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "the access type which triggered the control event. This object reports 'nms' unless 'ipeAccessType' is set within the SNMP SET PDU. Otherwise this object reports the same value of 'ipeAccessType'." ::= { ipeTrapControlVars 2 } eventRecordAccessFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "the ip address which triggered the control event. The ip address is normally recognized by source ip address of SET-REQUEST. But when 'ipeAccessFrom' is set in the SET-REQUEST, this object reports same value of 'ipeAccessFrom'." ::= { ipeTrapControlVars 3 } ipeTrapFileDownloadValueVars OBJECT IDENTIFIER ::= { ipeTrapCommon 7 } eventDownloadModule OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents download module type which triggered download event. The type values are same as 'ipeSysOpFileDownloadModule'." ::= { ipeTrapFileDownloadValueVars 1 } eventDownloadStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents download status. The status values are same as 'ipeSysOpFileDownloadStatus'." ::= { ipeTrapFileDownloadValueVars 2 } eventUpdateDetail OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Represents download file name which is specified by 'ipeFsUpdateFileDetail'." ::= { ipeTrapFileDownloadValueVars 3 } eventUpdateStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents download file progress. The value is same as 'ipeFsUpdateFileStatus'." ::= { ipeTrapFileDownloadValueVars 4 } ipeTrapItemVar OBJECT IDENTIFIER ::= { trapGroup 3 } ipeAlarmTrapItemVar OBJECT IDENTIFIER ::= { ipeTrapItemVar 1 } alarmStateChange NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventSeverity, eventAlarmType, eventProbableCause, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Alarm This notification reports that a processed alarm status may have changed. The object information is recorded in 'eventResourceID' and also changed alarm status is recorded in 'eventSeverity'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeAlarmTrapItemVar 1 } ipeStatusTrapItemVar OBJECT IDENTIFIER ::= { ipeTrapItemVar 2 } statusChange NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventStatusValue, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Status (Integer) This notification reports that the object's status whose SYNTAX is INTEGER type may have changed. The object information is recorded in 'eventResourceID'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeStatusTrapItemVar 1 } statusChangeDspStr NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventStatusValueDspStr, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Status (Display String) This notification reports that the object's status whose SYNTAX is DISPLAY STRING type may have changed. The object information is recorded in 'eventResourceID'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeStatusTrapItemVar 2 } statusChangeOctStr NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventStatusValueOctStr, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Status (Octet String) This notification reports that the object's status whose SYNTAX is OCTET STRING type may have changed. The object information is recorded in 'eventResourceID'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeStatusTrapItemVar 3 } statusChangeUnsigned32 NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventStatusValueUnsigned32, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Status (Unsigned32) This notification reports that the object's status whose SYNTAX is Unsigned type may have changed. The object information is recorded in 'eventResourceID' and also changed alarm status is recorded in 'eventSeverity'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeStatusTrapItemVar 4 } ipeControlTrapItemVar OBJECT IDENTIFIER ::= { ipeTrapItemVar 3 } controlEvent NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventControlValue, eventRecordUserName, eventRecordAccessType, eventRecordAccessFrom, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Control (Integer) This notification reports that the object's value is changed by snmp-set request. The object information is recorded in 'eventResourceID' and also changed value is recorded in 'eventControlValue'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeControlTrapItemVar 1 } controlEventDspStr NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventControlValueDspStr, eventRecordUserName, eventRecordAccessType, eventRecordAccessFrom, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Control (Display String) This notification reports that the object's value is changed by snmp-set request. The object information is recorded in 'eventResourceID' and also changed value is recorded in 'eventControlValueDspStr'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeControlTrapItemVar 2 } controlEventOctStr NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventControlValueOctStr, eventRecordUserName, eventRecordAccessType, eventRecordAccessFrom, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Control (Octet String) This notification reports that the object's value is changed by snmp-set request. The object information is recorded in 'eventResourceID' and also changed value is recorded in 'eventControlValueOctStr'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeControlTrapItemVar 3 } controlEventUnsigned32 NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventControlValueUnsigned32, eventRecordUserName, eventRecordAccessType, eventRecordAccessFrom, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for Control (Unsigned32) This notification reports that the object's value is changed by snmp-set request. The object information is recorded in 'eventResourceID' and also changed value is recorded in 'eventControlValueUnsigned32'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeControlTrapItemVar 4 } ipeFileDownloadTrapItemVar OBJECT IDENTIFIER ::= { ipeTrapItemVar 4 } fileDownloadEvent NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventDownloadModule, eventDownloadStatus, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for File Download This notification reports that the executed download status is changed. Changed value is recorded in 'eventDownloadStatus'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeFileDownloadTrapItemVar 1 } fileUpdateEvent NOTIFICATION-TYPE OBJECTS { eventTotalCount, eventCount, eventTime, eventType, eventResourceID, eventUpdateDetail, eventUpdateStatus, eventAdditionalText1, eventAdditionalText2, eventAdditionalText3, eventAdditionalText4, eventAdditionalText5 } STATUS current DESCRIPTION "Trap for File Update This notification reports that the executed file update status is changed. Changed value is recorded in 'eventUpdateStatus'. The 'eventTotalCount' and 'eventCount' is sequential number. 'eventTotalCount' is notification event count since agent was booted. 'eventAdditionalText' provides some event description." ::= { ipeFileDownloadTrapItemVar 2 } ipeEventGroup OBJECT IDENTIFIER ::= { trapGroup 4 } eventTable OBJECT-TYPE SYNTAX SEQUENCE OF EventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents trap counter value of each event type." ::= { ipeEventGroup 1 } eventEntry OBJECT-TYPE SYNTAX EventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { eventIndex } ::= { eventTable 1 } EventEntry ::= SEQUENCE { eventIndex INTEGER, eventNEAddress IpAddress, eventDescription DisplayString, eventCounter Counter32, eventLastTime DateAndTime } eventIndex OBJECT-TYPE SYNTAX INTEGER { alarmStateChage(1), statusChange(2), controlEvent(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { eventEntry 1 } eventNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { eventEntry 2 } eventDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string information about the event." ::= { eventEntry 3 } eventCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of SNMP TRAP/INFORM messages per event type (alarm/status/control) since this equipment was booted." ::= { eventEntry 4 } eventLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when this event type was last updated." ::= { eventEntry 5 } eventTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF EventTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents event information." ::= { ipeEventGroup 2 } eventTypeEntry OBJECT-TYPE SYNTAX EventTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { eventTypeIndex, eventTypeSourceCategory, eventTypeElemId } ::= { eventTypeTable 1 } EventTypeEntry ::= SEQUENCE { eventTypeIndex Integer32, eventTypeSourceCategory Integer32, eventTypeElemId Integer32, eventTypeNEAddress IpAddress, eventTypeTrapId Integer32, eventTypeDescription DisplayString, eventTypeRowStatus RowStatus } eventTypeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { eventTypeEntry 1 } eventTypeSourceCategory OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. This object represents category of generator of the event." ::= { eventTypeEntry 2 } eventTypeElemId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. Administrative index value of the event which is uniquely identified among the eventTypeSourceCategory." ::= { eventTypeEntry 3 } eventTypeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { eventTypeEntry 4 } eventTypeTrapId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents event type id same as eventTypeIndex. This object indicates which counter will be incremented when this event occurs." ::= { eventTypeEntry 5 } eventTypeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A Textual string information about the event." ::= { eventTypeEntry 6 } eventTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table. This table is created automatically when the agent starts, and cannot create or destroy from manager." ::= { eventTypeEntry 7 } ipeTrapStatusGroup OBJECT IDENTIFIER ::= { trapGroup 5 } ipeTrapCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeTrapCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents event total count." ::= { ipeTrapStatusGroup 1 } ipeTrapCounterEntry OBJECT-TYPE SYNTAX IpeTrapCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipeTrapCounterIndex } ::= { ipeTrapCounterTable 1 } IpeTrapCounterEntry ::= SEQUENCE { ipeTrapCounterIndex Integer32, ipeTrapTotalCounterNEAddress IpAddress, ipeTrapTotalCounter Counter32 } ipeTrapCounterIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeTrapCounterEntry 1 } ipeTrapTotalCounterNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeTrapCounterEntry 2 } ipeTrapTotalCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "represents total counter value which counts all event type of TRAP/INFORM messages." ::= { ipeTrapCounterEntry 3 } ----------------------------------------------- -- alarmStatusGroup Definitions ----------------------------------------------- asOduGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 1 } oduGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF OduGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents alarm and status information." ::= { asOduGroup 1 } oduGroupEntry OBJECT-TYPE SYNTAX OduGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { oduGroupIfIndex } ::= { oduGroupTable 1 } OduGroupEntry ::= SEQUENCE { oduGroupIfIndex InterfaceIndex, oduGroupNEAddress IpAddress, oduAlarm SeverityValue, txPowerAlarm SeverityValue, txInputAlarm SeverityValue, rxLevelAlarm SeverityValue, cpuCableOpenAlarm SeverityValue, loRefAlarm SeverityValue, muteStatus OffOnValue, oduPsAlarm SeverityValue, oduPsSetStatus OffOnValue, oduTypeMismatch SeverityValue, oduTotalAlarm SeverityValue } oduGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { oduGroupEntry 1 } oduGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { oduGroupEntry 2 } oduAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Alarm." ::= { oduGroupEntry 3 } txPowerAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU TX Power Alarm." ::= { oduGroupEntry 4 } txInputAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU TX Input Alarm." ::= { oduGroupEntry 5 } rxLevelAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU RX Level Alarm." ::= { oduGroupEntry 6 } cpuCableOpenAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU CPU / Cable Open Alarm." ::= { oduGroupEntry 7 } loRefAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU LO REF Alarm" ::= { oduGroupEntry 8 } muteStatus OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU mute status." ::= { oduGroupEntry 9 } oduPsAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Power Supply Alarm" ::= { oduGroupEntry 10 } oduPsSetStatus OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Power Supply Status." ::= { oduGroupEntry 11 } oduTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Type Mismatch Alarm." ::= { oduGroupEntry 12 } oduTotalAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Total Alarm." ::= { oduGroupEntry 13 } oduSwGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF OduSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents ODU Switch Group Status." ::= { asOduGroup 2 } oduSwGroupEntry OBJECT-TYPE SYNTAX OduSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { oduSwGroupIfIndex } ::= { oduSwGroupTable 1 } OduSwGroupEntry ::= SEQUENCE { oduSwGroupIfIndex InterfaceIndex, oduSwGroupNEAddress IpAddress, txSWStatus INTEGER, rxSWStatus INTEGER, txSWLockInStatus INTEGER, txSwReverseReqRecvStatus INTEGER } oduSwGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { oduSwGroupEntry 1 } oduSwGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { oduSwGroupEntry 2 } txSWStatus OBJECT-TYPE SYNTAX INTEGER { no1(1), no2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU TX SW Status" ::= { oduSwGroupEntry 3 } rxSWStatus OBJECT-TYPE SYNTAX INTEGER { no1(1), no2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU RX SW Status" ::= { oduSwGroupEntry 4 } txSWLockInStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), lockin(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TX SW Lock-in Status" ::= { oduSwGroupEntry 5 } txSwReverseReqRecvStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), received(2), execute(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TX SW Reverse Request Status." ::= { oduSwGroupEntry 6 } asModemGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 2 } modemGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ModemGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents MODEM Alarm Status information." ::= { asModemGroup 1 } modemGroupEntry OBJECT-TYPE SYNTAX ModemGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { modemGroupIfIndex } ::= { modemGroupTable 1 } ModemGroupEntry ::= SEQUENCE { modemGroupIfIndex InterfaceIndex, modemGroupNEAddress IpAddress, lof SeverityValue, frameID SeverityValue, highBERAlarm SeverityValue, lowBERAlarm SeverityValue, earlyWarningAlarm SeverityValue, modAlarm SeverityValue, ifCableShortAlarm SeverityValue, atpcPowerMode INTEGER, inPhaseStatus INTEGER, amrRangeMismatch SeverityValue, txModulation INTEGER, rxModulation INTEGER, l2SyncLossAlarm SeverityValue, rdiAlarm SeverityValue, uaeAlarm SeverityValue, unlocked SeverityValue, tempAlarm SeverityValue, tdmRangeMismatch SeverityValue, modemPsOff OffOnValue } modemGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { modemGroupEntry 1 } modemGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { modemGroupEntry 2 } lof OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM LOF Alarm" ::= { modemGroupEntry 3 } frameID OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Frame ID Alarm" ::= { modemGroupEntry 4 } highBERAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM High BER Alarm." ::= { modemGroupEntry 5 } lowBERAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Low BER Alarm." ::= { modemGroupEntry 6 } earlyWarningAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Early Warning Alarm" ::= { modemGroupEntry 7 } modAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM MOD Alarm" ::= { modemGroupEntry 8 } ifCableShortAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM IF Cable Short Alarm" ::= { modemGroupEntry 9 } atpcPowerMode OBJECT-TYPE SYNTAX INTEGER { stop(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM ATPC Power Mode Status" ::= { modemGroupEntry 10 } inPhaseStatus OBJECT-TYPE SYNTAX INTEGER { inphase(1), outphase(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Inphase Status" ::= { modemGroupEntry 11 } amrRangeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "obsoleted" ::= { modemGroupEntry 12 } txModulation OBJECT-TYPE SYNTAX INTEGER { invalid(0), qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6), qam512(7), qam1024(8), qam2048(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TX Modulation Status" ::= { modemGroupEntry 13 } rxModulation OBJECT-TYPE SYNTAX INTEGER { invalid(0), qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6), qam512(7), qam1024(8), qam2048(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM RX Modulation Status." ::= { modemGroupEntry 14 } l2SyncLossAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM L2SYNC Loss Alarm." ::= { modemGroupEntry 15 } rdiAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM RDI Alarm" ::= { modemGroupEntry 16 } uaeAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM UAE Alarm" ::= { modemGroupEntry 17 } unlocked OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Unlocked Alarm" ::= { modemGroupEntry 18 } tempAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "MODEM Temperature Alarm" ::= { modemGroupEntry 19 } tdmRangeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TDM / AMR / AMBR Range Mismatch Alarm" ::= { modemGroupEntry 20 } modemPsOff OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "MDOEM Power Supply Status" ::= { modemGroupEntry 21 } modemXpicTable OBJECT-TYPE SYNTAX SEQUENCE OF ModemXpicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents XPIC Alarm and Status" ::= { asModemGroup 2 } modemXpicEntry OBJECT-TYPE SYNTAX ModemXpicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { modemXpicIfIndex } ::= { modemXpicTable 1 } ModemXpicEntry ::= SEQUENCE { modemXpicIfIndex InterfaceIndex, modemXpicNEAddress IpAddress, xIFLevelAlarm SeverityValue, xpicTypeMismatch SeverityValue } modemXpicIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { modemXpicEntry 1 } modemXpicNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { modemXpicEntry 2 } xIFLevelAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM XIF Alarm." ::= { modemXpicEntry 3 } xpicTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM XPIC Mode Mismatch Alarm." ::= { modemXpicEntry 4 } modemCardTable OBJECT-TYPE SYNTAX SEQUENCE OF ModemCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents MODEM Card Alarm Status." ::= { asModemGroup 3 } modemCardEntry OBJECT-TYPE SYNTAX ModemCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { modemCardIndex } ::= { modemCardTable 1 } ModemCardEntry ::= SEQUENCE { modemCardIndex Integer32, modemCardNEAddress IpAddress, modemComFailAlarm SeverityValue, modemUnequipped SeverityValue, modemAlarm SeverityValue, modemBusErrorTx SeverityValue, modemBusErrorRx SeverityValue, modemTypeMismatch SeverityValue, modemCardOnlineStatus INTEGER, modemCardPsAlarm SeverityValue } modemCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { modemCardEntry 1 } modemCardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { modemCardEntry 2 } modemComFailAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Communication FAIL Alarm." ::= { modemCardEntry 3 } modemUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Unequipped Alarm." ::= { modemCardEntry 4 } modemAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Module Alarm." ::= { modemCardEntry 5 } modemBusErrorTx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Tx Bus Error Alarm." ::= { modemCardEntry 6 } modemBusErrorRx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Rx Bus Error Alarm." ::= { modemCardEntry 7 } modemTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Type Mismatch Alarm." ::= { modemCardEntry 8 } modemCardOnlineStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), offline(1), online(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Online Status" ::= { modemCardEntry 9 } modemCardPsAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Power Supply Alarm." ::= { modemCardEntry 10 } asModemHeaderCompressTable OBJECT-TYPE SYNTAX SEQUENCE OF AsModemHeaderCompressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Header Compression Function Status. This table is created automatically when the Modem Card is provisioned, if the F/W supports the new Header Compression function." ::= { asModemGroup 4 } asModemHeaderCompressEntry OBJECT-TYPE SYNTAX AsModemHeaderCompressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asModemHeaderCompressIfIndex } ::= { asModemHeaderCompressTable 1 } AsModemHeaderCompressEntry ::= SEQUENCE { asModemHeaderCompressIfIndex InterfaceIndex, asModemHeaderCompressNEAddress IpAddress, asModemHeaderCompressMismatch SeverityValue, asModemHeaderCompressCurrentMode INTEGER, asModemHeaderCompressVersion Integer32 } asModemHeaderCompressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asModemHeaderCompressEntry 1 } asModemHeaderCompressNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asModemHeaderCompressEntry 2 } asModemHeaderCompressMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Header/Payload* Compression Mismatch Alarm. If the configuration of local and remote header compression mode is different, the alarm will be reported. (*iPASOLINK VR series only)" ::= { asModemHeaderCompressEntry 3 } asModemHeaderCompressCurrentMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), mac(2), macWithIpv4(3), macWithIpv6(4), macWithMpls(5), enhancedMacWithIpv4(6), enhancedMacWithIpv6(7), enhancedMacWithMpls(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Header/Payload* Compression Mode. This value shows same value as 'provModemHeaderCompressMode' usually. But the value will be different from 'provModemHeaderCompressMode', when the new Header Compression Function is configured to the old Modem Card (which does not have new Header Compression capabilities) (*iPASOLINK VR series only)" ::= { asModemHeaderCompressEntry 4 } asModemHeaderCompressVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version of Header/Payload* Compression Function. '1' means the Header Compression is not supported and the Payload* Compression is not supported. '2' means the Header Compression is supported and the Payload* Compression is not supported. '3' means the Header Compression is not supported and the Payload* Compression is supported. '4' means the Header Compression is supported and the Payload* Compression is supported. (*iPASOLINK VR series only)" ::= { asModemHeaderCompressEntry 5 } asModemHeaderCompressRemoteTable OBJECT-TYPE SYNTAX SEQUENCE OF AsModemHeaderCompressRemoteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote Modem Header Compression Function Status. This table is created automatically when the Modem Card is provisioned, if the F/W supports the new Header Compression function." ::= { asModemGroup 5 } asModemHeaderCompressRemoteEntry OBJECT-TYPE SYNTAX AsModemHeaderCompressRemoteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asModemHeaderCompressRemoteIfIndex } ::= { asModemHeaderCompressRemoteTable 1 } AsModemHeaderCompressRemoteEntry ::= SEQUENCE { asModemHeaderCompressRemoteIfIndex InterfaceIndex, asModemHeaderCompressRemoteNEAddress IpAddress, asModemHeaderCompressRemoteMode INTEGER, asModemHeaderCompressRemoteVlanMode INTEGER, asModemHeaderCompressRemoteVersion Integer32 } asModemHeaderCompressRemoteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asModemHeaderCompressRemoteEntry 1 } asModemHeaderCompressRemoteNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asModemHeaderCompressRemoteEntry 2 } asModemHeaderCompressRemoteMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), mac(2), macWithIpv4(3), macWithIpv6(4), macWithMpls(5), enhancedMacWithIpv4(6), enhancedMacWithIpv6(7), enhancedMacWithMpls(8), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Header/Payload* Compression Mode of Remote Modem. When the Radio link is not established, the value will be changed to 'unknown'. (*iPASOLINK VR series only)" ::= { asModemHeaderCompressRemoteEntry 3 } asModemHeaderCompressRemoteVlanMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), dot1q(1), dot1ad(2), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN Mode of Remote equipment. When the Radio link is not established, the object will show the value 'unknown'." ::= { asModemHeaderCompressRemoteEntry 4 } asModemHeaderCompressRemoteVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version of Header/Payload* Compression Function for the Remote Modem. '1' means the Header Compression is not supported and the Payload* Compression is not supported. '2' means the Header Compression is supported and the Payload* Compression is not supported. '3' means the Header Compression is not supported and the Payload* Compression is supported. '4' means the Header Compression is supported and the Payload* Compression is supported. When the Radio link is not established, the object will return '99'. If the object returns other value, the local node cannot recognize the received value from remote node. (*iPASOLINK VR series only)" ::= { asModemHeaderCompressRemoteEntry 5 } asModemTrafficAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF AsModemTrafficAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains alarm and status object for Radio Traffic Aggregation mode." ::= { asModemGroup 6 } asModemTrafficAggrEntry OBJECT-TYPE SYNTAX AsModemTrafficAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asModemTrafficAggrIfIndex } ::= { asModemTrafficAggrTable 1 } AsModemTrafficAggrEntry ::= SEQUENCE { asModemTrafficAggrIfIndex InterfaceIndex, asModemTrafficAggrNEAddress IpAddress, asModemTrafficAggrModeMismatch SeverityValue, asModemTrafficAggrVersion Integer32, asModemTrafficAggrEncapStatus INTEGER } asModemTrafficAggrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asModemTrafficAggrEntry 1 } asModemTrafficAggrNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asModemTrafficAggrEntry 2 } asModemTrafficAggrModeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Traffic Aggregation Mode Mismatch Alarm. This alarm is asserted if the Radio Traffic Aggregation is configured when the H/W and/or F/W does not support the function. And also the alarm is asserted when the configuration is mismatched between local node and peer node." ::= { asModemTrafficAggrEntry 3 } asModemTrafficAggrVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The support version of Radio Traffic Aggreation function. '5' means the physical advanced mode aggregation, physical mode aggregation, and legacy radio traffic aggregation are supported (valid for iPASO VR 10 only) '2' means the physical mode aggregation and legacy radio traffic aggregation are supported '1' means the legacy radio traffic aggregation is supported but physical mode is not supported. '0' means the physical mode and legacy radio traffic aggregation are not supported (license is not installed or Modem card does not have that capability)." ::= { asModemTrafficAggrEntry 4 } asModemTrafficAggrEncapStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Traffic Aggregation Encapsulation Status. When the Modem cannot build frames continuously, the object will assert the 'fail'. The value will change to 'normal' if the condition is cleared." ::= { asModemTrafficAggrEntry 5 } asCtrlGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 3 } ctrlGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CtrlGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Main Board/Ctrl Card Alarm and Status" ::= { asCtrlGroup 1 } ctrlGroupEntry OBJECT-TYPE SYNTAX CtrlGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ctrlGroupIndex } ::= { ctrlGroupTable 1 } CtrlGroupEntry ::= SEQUENCE { ctrlGroupIndex Integer32, ctrlGroupNEAddress IpAddress, ctrlAlarm SeverityValue, usbFailure SeverityValue, svLineAlarm SeverityValue, iduCpuAlarm SeverityValue, iduTotalAlarm SeverityValue, maintenance OffOnValue, busError SeverityValue, memoryFailure SeverityValue, clk2mMount INTEGER, ctrlTempAlarm SeverityValue, ctrlTemperature Integer32 } ctrlGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ctrlGroupEntry 1 } ctrlGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ctrlGroupEntry 2 } ctrlAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Module Alarm" ::= { ctrlGroupEntry 3 } usbFailure OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card USB FAIL Alarm" ::= { ctrlGroupEntry 4 } svLineAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SV Line Alarm" ::= { ctrlGroupEntry 5 } iduCpuAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card IDU CPU Alarm" ::= { ctrlGroupEntry 6 } iduTotalAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card IDU Total Alarm" ::= { ctrlGroupEntry 7 } maintenance OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Maintenance Status. This object shows that some maintenance functions are performed under that equipment." ::= { ctrlGroupEntry 8 } busError OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Bus Error Alarm." ::= { ctrlGroupEntry 9 } memoryFailure OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Memory FAIL Alarm." ::= { ctrlGroupEntry 10 } clk2mMount OBJECT-TYPE SYNTAX INTEGER { unmount(1), mount(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Mount Status." ::= { ctrlGroupEntry 11 } ctrlTempAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Temperature Alarm." ::= { ctrlGroupEntry 12 } ctrlTemperature OBJECT-TYPE SYNTAX Integer32 (-999|-200..900) UNITS "0.1 degree" MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Temperature. if the unexpected condition happened, the object reports value '-999'." ::= { ctrlGroupEntry 13 } sncpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SncpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents E1 SNCP Status." ::= { asCtrlGroup 2 } sncpGroupEntry OBJECT-TYPE SYNTAX SncpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sncpGroupIndex } ::= { sncpGroupTable 1 } SncpGroupEntry ::= SEQUENCE { sncpGroupIndex Integer32, sncpGroupNEAddress IpAddress, ppsFail SeverityValue, sncpProtectionStatusCh1 INTEGER, sncpProtectionStatusCh2 INTEGER, sncpOnlineStatus INTEGER, sncpSwStatus INTEGER } sncpGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..2352) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { sncpGroupEntry 1 } sncpGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { sncpGroupEntry 2 } ppsFail OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card PPS FAIL Alarm." ::= { sncpGroupEntry 3 } sncpProtectionStatusCh1 OBJECT-TYPE SYNTAX INTEGER { fs(1), sf(2), sd(3), ms(4), nr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SNCP Protection Status for Channel 1" ::= { sncpGroupEntry 4 } sncpProtectionStatusCh2 OBJECT-TYPE SYNTAX INTEGER { fs(1), sf(2), sd(3), ms(4), nr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SNCP Protection Status for Channel 2" ::= { sncpGroupEntry 5 } sncpOnlineStatus OBJECT-TYPE SYNTAX INTEGER { work(1), protection(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SNCP Online Status." ::= { sncpGroupEntry 6 } sncpSwStatus OBJECT-TYPE SYNTAX INTEGER { no1(1), no2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SNCP Switch Status." ::= { sncpGroupEntry 7 } asAuxGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 4 } auxGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents AUX Card Alarm / Status." ::= { asAuxGroup 1 } auxGroupEntry OBJECT-TYPE SYNTAX AuxGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { auxGroupIndex } ::= { auxGroupTable 1 } AuxGroupEntry ::= SEQUENCE { auxGroupIndex Integer32, auxGroupNEAddress IpAddress, auxUnequipped SeverityValue, auxTypeMismatch SeverityValue, auxAlarm SeverityValue, auxComFailAlarm SeverityValue, auxBusErrorTx SeverityValue, auxBusErrorRx SeverityValue } auxGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { auxGroupEntry 1 } auxGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { auxGroupEntry 2 } auxUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Unequipped Alarm" ::= { auxGroupEntry 3 } auxTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Type Mismatch Alarm." ::= { auxGroupEntry 4 } auxAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Module Alarm." ::= { auxGroupEntry 5 } auxComFailAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Communication FAIL Alarm." ::= { auxGroupEntry 6 } auxBusErrorTx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Tx Bus Error Alarm" ::= { auxGroupEntry 7 } auxBusErrorRx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX Rx Bus Error Alarm" ::= { auxGroupEntry 8 } asClkGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 5 } clkCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF ClkCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Main Board / Ctrl Card CLK Status." ::= { asClkGroup 1 } clkCommonEntry OBJECT-TYPE SYNTAX ClkCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { clkCommonIndex } ::= { clkCommonTable 1 } ClkCommonEntry ::= SEQUENCE { clkCommonIndex INTEGER, clkCommonNEAddress IpAddress, ltiAlarm SeverityValue, refClkChange INTEGER, extClkLoop SeverityValue, currentTimingSource INTEGER, timingSourceCondition INTEGER, timingSourceControlStatus INTEGER } clkCommonIndex OBJECT-TYPE SYNTAX INTEGER { clk(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { clkCommonEntry 1 } clkCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { clkCommonEntry 2 } ltiAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card LTI Alarm." ::= { clkCommonEntry 3 } refClkChange OBJECT-TYPE SYNTAX INTEGER { lockedRef1(1), lockedRef2(2), lockedRef3(3), holdover(4), freerun(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card CLK Status." ::= { clkCommonEntry 4 } extClkLoop OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Timing Loop Alarm." ::= { clkCommonEntry 5 } currentTimingSource OBJECT-TYPE SYNTAX INTEGER { selectRef1(1), selectRef2(2), selectRef3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Current Timing Source." ::= { clkCommonEntry 6 } timingSourceCondition OBJECT-TYPE SYNTAX INTEGER { locked(1), holdover(2), freerun(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Timing Source Status." ::= { clkCommonEntry 7 } timingSourceControlStatus OBJECT-TYPE SYNTAX INTEGER { auto(1), manualSelect(2), forcedSelect(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Timing Source Switch Status." ::= { clkCommonEntry 8 } clkRefTable OBJECT-TYPE SYNTAX SEQUENCE OF ClkRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Timing Source Status." ::= { asClkGroup 2 } clkRefEntry OBJECT-TYPE SYNTAX ClkRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { clkRefIndex } ::= { clkRefTable 1 } ClkRefEntry ::= SEQUENCE { clkRefIndex INTEGER, clkRefNEAddress IpAddress, clkFailedAlarm SeverityValue, clkDriftAlarm SeverityValue, clkRefFailedAlarm SeverityValue, refLockoutStatus INTEGER, refQL INTEGER } clkRefIndex OBJECT-TYPE SYNTAX INTEGER { refclk1(1), refclk2(2), refclk3(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { clkRefEntry 1 } clkRefNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { clkRefEntry 2 } clkFailedAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card CLK FAIL Alarm per CLK Reference." ::= { clkRefEntry 3 } clkDriftAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card CLK Drift Alarm per CLK Reference." ::= { clkRefEntry 4 } clkRefFailedAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card SSM FAIL Alarm per CLK Reference." ::= { clkRefEntry 5 } refLockoutStatus OBJECT-TYPE SYNTAX INTEGER { lockout(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Lockout Status per CLK Reference." ::= { clkRefEntry 6 } refQL OBJECT-TYPE SYNTAX INTEGER { qlPrc(1), qlSsuA(2), qlSsuB(3), qlOriginal(4), qlSec(5), qlDnu(6), qlInvx(7), qlFailed(8), notAvail(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Quality level per CLK Reference." ::= { clkRefEntry 7 } asExtClkGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 6 } extClkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtClkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Ext CLK Alarm / Status." ::= { asExtClkGroup 1 } extClkGroupEntry OBJECT-TYPE SYNTAX ExtClkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { extClkGroupIndex } ::= { extClkGroupTable 1 } ExtClkGroupEntry ::= SEQUENCE { extClkGroupIndex INTEGER, extClkGroupNEAddress IpAddress, clk2mLosAlarm SeverityValue, aisAlarm SeverityValue, lofAlarm SeverityValue, clk2mUnequipped SeverityValue, extClkOutputStatus INTEGER, extClkOutputQlValue INTEGER, squelch INTEGER, clk2mTypeMismatch SeverityValue } extClkGroupIndex OBJECT-TYPE SYNTAX INTEGER { extclk(1), extclk2(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { extClkGroupEntry 1 } extClkGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { extClkGroupEntry 2 } clk2mLosAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK LOS Alarm." ::= { extClkGroupEntry 3 } aisAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK AIS Alarm." ::= { extClkGroupEntry 4 } lofAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK LOF Alarm." ::= { extClkGroupEntry 5 } clk2mUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Unequipped Alarm." ::= { extClkGroupEntry 6 } extClkOutputStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), ais(2), shutdown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Output Status." ::= { extClkGroupEntry 7 } extClkOutputQlValue OBJECT-TYPE SYNTAX INTEGER { qlPrc(1), qlSsuA(2), qlSsuB(3), qlOriginal(4), qlSec(5), qlDnu(6), qlInvx(7), qlFailed(8), notAvail(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Quality Level." ::= { extClkGroupEntry 8 } squelch OBJECT-TYPE SYNTAX INTEGER { normal(1), squelch(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Squelch Status." ::= { extClkGroupEntry 9 } clk2mTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card EXT CLK Type Mismatch Alarm." ::= { extClkGroupEntry 10 } asFanGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 7 } fanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF FanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents FAN Card Alarm / Status." ::= { asFanGroup 1 } fanGroupEntry OBJECT-TYPE SYNTAX FanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { fanGroupIndex } ::= { fanGroupTable 1 } FanGroupEntry ::= SEQUENCE { fanGroupIndex Integer32, fanGroupNEAddress IpAddress, fanAlarm SeverityValue, fanUnequipped SeverityValue } fanGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { fanGroupEntry 1 } fanGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { fanGroupEntry 2 } fanAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "FAN FAIL Alarm." ::= { fanGroupEntry 3 } fanUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "FAN Unequipped Alarm." ::= { fanGroupEntry 4 } asPsGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 8 } psGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF PsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Main Board / Ctrl Card Power Supply Alarm / Status." ::= { asPsGroup 1 } psGroupEntry OBJECT-TYPE SYNTAX PsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { psGroupIndex } ::= { psGroupTable 1 } PsGroupEntry ::= SEQUENCE { psGroupIndex Integer32, psGroupNEAddress IpAddress, psPowerSupply SeverityValue, psUnequipped SeverityValue } psGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { psGroupEntry 1 } psGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { psGroupEntry 2 } psPowerSupply OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Power Supply Alarm." ::= { psGroupEntry 3 } psUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Power Supply Unequipped Alarm." ::= { psGroupEntry 4 } asTCNGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 9 } tcn15minDataRadioGroup OBJECT IDENTIFIER ::= { asTCNGroup 1 } tcn15minDataRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threashold Crossing Alarm Status of 15 minutes PMON for Radio." ::= { tcn15minDataRadioGroup 1 } tcn15minDataRadioEntry OBJECT-TYPE SYNTAX Tcn15minDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minDataModemIfIndex, tcn15minDataModemMonitorName } ::= { tcn15minDataRadioTable 1 } Tcn15minDataRadioEntry ::= SEQUENCE { tcn15minDataModemIfIndex InterfaceIndex, tcn15minDataModemMonitorName INTEGER, tcn15minDataRadioNEAddress IpAddress, tcn15minDataRf SeverityValue } tcn15minDataModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataRadioEntry 1 } tcn15minDataModemMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minDataRadioEntry 2 } tcn15minDataRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataRadioEntry 3 } tcn15minDataRf OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN MODEM 15 minutes RF Monitoring Alarm per counting item." ::= { tcn15minDataRadioEntry 4 } tcn15minRxLevTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minRxLevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm Status of 15 minutes Rx Level Alarm." ::= { tcn15minDataRadioGroup 2 } tcn15minRxLevEntry OBJECT-TYPE SYNTAX Tcn15minRxLevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minRxLevIfIndex } ::= { tcn15minRxLevTable 1 } Tcn15minRxLevEntry ::= SEQUENCE { tcn15minRxLevIfIndex InterfaceIndex, tcn15minRxLevNEAddress IpAddress, tcn15minRxLev SeverityValue } tcn15minRxLevIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minRxLevEntry 1 } tcn15minRxLevNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minRxLevEntry 2 } tcn15minRxLev OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN MODEM 15 minutes RX Level (Min) Alarm." ::= { tcn15minRxLevEntry 3 } tcn15minDataCableGroup OBJECT IDENTIFIER ::= { asTCNGroup 2 } tcn15minDataThroughModeGroup OBJECT IDENTIFIER ::= { tcn15minDataCableGroup 1 } tcn15minDataTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes PMON for RS Layer of through mode STM-1." ::= { tcn15minDataThroughModeGroup 1 } tcn15minDataTmRsEntry OBJECT-TYPE SYNTAX Tcn15minDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minDataTmRsIfIndex, tcn15minDataTmRsMonitorName } ::= { tcn15minDataTmRsTable 1 } Tcn15minDataTmRsEntry ::= SEQUENCE { tcn15minDataTmRsIfIndex InterfaceIndex, tcn15minDataTmRsMonitorName INTEGER, tcn15minDataTmRsNEAddress IpAddress, tcn15minDataTmRs SeverityValue } tcn15minDataTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataTmRsEntry 1 } tcn15minDataTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minDataTmRsEntry 2 } tcn15minDataTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataTmRsEntry 3 } tcn15minDataTmRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 15 minutes (Through Mode) RS Monitoring Alarm." ::= { tcn15minDataTmRsEntry 4 } tcn15minDataTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes PMON for DMR RS Layer of STM-1" ::= { tcn15minDataThroughModeGroup 2 } tcn15minDataTmDMRRsEntry OBJECT-TYPE SYNTAX Tcn15minDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minDataTmDMRRsIfIndex, tcn15minDataTmDMRRsMonitorName } ::= { tcn15minDataTmDMRRsTable 1 } Tcn15minDataTmDMRRsEntry ::= SEQUENCE { tcn15minDataTmDMRRsIfIndex InterfaceIndex, tcn15minDataTmDMRRsMonitorName INTEGER, tcn15minDataTmDMRRsNEAddress IpAddress, tcn15minDataTmDMRRs SeverityValue } tcn15minDataTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataTmDMRRsEntry 1 } tcn15minDataTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minDataTmDMRRsEntry 2 } tcn15minDataTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataTmDMRRsEntry 3 } tcn15minDataTmDMRRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 15 minutes (Through Mode)DMR RS Monitoring Alarm." ::= { tcn15minDataTmDMRRsEntry 4 } tcn15minDataChannelizedModeGroup OBJECT IDENTIFIER ::= { tcn15minDataCableGroup 2 } tcn15minDataChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes PMON for Channelized Mode RS Layer of STM-1." ::= { tcn15minDataChannelizedModeGroup 1 } tcn15minDataChRsEntry OBJECT-TYPE SYNTAX Tcn15minDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minDataChRsIfIndex, tcn15minDataChRsMonitorName } ::= { tcn15minDataChRsTable 1 } Tcn15minDataChRsEntry ::= SEQUENCE { tcn15minDataChRsIfIndex InterfaceIndex, tcn15minDataChRsMonitorName INTEGER, tcn15minDataChRsNEAddress IpAddress, tcn15minDataChRs SeverityValue } tcn15minDataChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataChRsEntry 1 } tcn15minDataChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minDataChRsEntry 2 } tcn15minDataChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataChRsEntry 3 } tcn15minDataChRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 15 minutes (Channelized Mode) RS Monitoring Alarm per counting item." ::= { tcn15minDataChRsEntry 4 } tcn15minDataChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes PMON for Channelized Mode MS Layer of STM-1." ::= { tcn15minDataChannelizedModeGroup 2 } tcn15minDataChMsEntry OBJECT-TYPE SYNTAX Tcn15minDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minDataChMsIfIndex, tcn15minDataChMsMonitorName } ::= { tcn15minDataChMsTable 1 } Tcn15minDataChMsEntry ::= SEQUENCE { tcn15minDataChMsIfIndex InterfaceIndex, tcn15minDataChMsMonitorName INTEGER, tcn15minDataChMsNEAddress IpAddress, tcn15minDataChMs SeverityValue } tcn15minDataChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataChMsEntry 1 } tcn15minDataChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minDataChMsEntry 2 } tcn15minDataChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataChMsEntry 3 } tcn15minDataChMs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 15 minutes (Channelized Mode) MS Monitoring Alarm." ::= { tcn15minDataChMsEntry 4 } tcn15minData16E1Group OBJECT IDENTIFIER ::= { tcn15minDataCableGroup 3 } tcn15minData16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes PMON for E1 Channel." ::= { tcn15minData16E1Group 1 } tcn15minData16E1PdhEntry OBJECT-TYPE SYNTAX Tcn15minData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minData16E1PdhIfIndex, tcn15minData16E1PdhMonitorName } ::= { tcn15minData16E1PdhTable 1 } Tcn15minData16E1PdhEntry ::= SEQUENCE { tcn15minData16E1PdhIfIndex InterfaceIndex, tcn15minData16E1PdhMonitorName INTEGER, tcn15minData16E1PdhNEAddress IpAddress, tcn15minData16E1Pdh SeverityValue } tcn15minData16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minData16E1PdhEntry 1 } tcn15minData16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { cv(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn15minData16E1PdhEntry 2 } tcn15minData16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minData16E1PdhEntry 3 } tcn15minData16E1Pdh OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN 15 minutes E1 CV Alarm." ::= { tcn15minData16E1PdhEntry 4 } tcn1dayDataRadioGroup OBJECT IDENTIFIER ::= { asTCNGroup 3 } tcn1dayDataRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threashold Crossing Alarm Status of 1 day PMON for Radio." ::= { tcn1dayDataRadioGroup 1 } tcn1dayDataRadioEntry OBJECT-TYPE SYNTAX Tcn1dayDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayDataModemIfIndex, tcn1dayDataModemMonitorName } ::= { tcn1dayDataRadioTable 1 } Tcn1dayDataRadioEntry ::= SEQUENCE { tcn1dayDataModemIfIndex InterfaceIndex, tcn1dayDataModemMonitorName INTEGER, tcn1dayDataRadioNEAddress IpAddress, tcn1dayDataRf SeverityValue } tcn1dayDataModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataRadioEntry 1 } tcn1dayDataModemMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayDataRadioEntry 2 } tcn1dayDataRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataRadioEntry 3 } tcn1dayDataRf OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN MODEM 1 day RF Monitoring Alarm per counting item." ::= { tcn1dayDataRadioEntry 4 } tcn1dayRxLevTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayRxLevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm Status of 1 day Rx Level Alarm." ::= { tcn1dayDataRadioGroup 2 } tcn1dayRxLevEntry OBJECT-TYPE SYNTAX Tcn1dayRxLevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayRxLevIfIndex } ::= { tcn1dayRxLevTable 1 } Tcn1dayRxLevEntry ::= SEQUENCE { tcn1dayRxLevIfIndex InterfaceIndex, tcn1dayRxLevNEAddress IpAddress, tcn1dayRxLev SeverityValue } tcn1dayRxLevIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayRxLevEntry 1 } tcn1dayRxLevNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayRxLevEntry 2 } tcn1dayRxLev OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN MODEM 1 day RX Level (Min) Alarm." ::= { tcn1dayRxLevEntry 3 } tcn1dayDataCableGroup OBJECT IDENTIFIER ::= { asTCNGroup 4 } tcn1dayDataThroughModeGroup OBJECT IDENTIFIER ::= { tcn1dayDataCableGroup 1 } tcn1dayDataTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day PMON for RS Layer of through mode STM-1." ::= { tcn1dayDataThroughModeGroup 1 } tcn1dayDataTmRsEntry OBJECT-TYPE SYNTAX Tcn1dayDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayDataTmRsIfIndex, tcn1dayDataTmRsMonitorName } ::= { tcn1dayDataTmRsTable 1 } Tcn1dayDataTmRsEntry ::= SEQUENCE { tcn1dayDataTmRsIfIndex InterfaceIndex, tcn1dayDataTmRsMonitorName INTEGER, tcn1dayDataTmRsNEAddress IpAddress, tcn1dayDataTmRs SeverityValue } tcn1dayDataTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataTmRsEntry 1 } tcn1dayDataTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayDataTmRsEntry 2 } tcn1dayDataTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataTmRsEntry 3 } tcn1dayDataTmRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 1 day (Through Mode) RS Monitoring Alarm." ::= { tcn1dayDataTmRsEntry 4 } tcn1dayDataTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day PMON for DMR RS Layer of STM-1" ::= { tcn1dayDataThroughModeGroup 2 } tcn1dayDataTmDMRRsEntry OBJECT-TYPE SYNTAX Tcn1dayDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayDataTmDMRRsIfIndex, tcn1dayDataTmDMRRsMonitorName } ::= { tcn1dayDataTmDMRRsTable 1 } Tcn1dayDataTmDMRRsEntry ::= SEQUENCE { tcn1dayDataTmDMRRsIfIndex InterfaceIndex, tcn1dayDataTmDMRRsMonitorName INTEGER, tcn1dayDataTmDMRRsNEAddress IpAddress, tcn1dayDataTmDMRRs SeverityValue } tcn1dayDataTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataTmDMRRsEntry 1 } tcn1dayDataTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayDataTmDMRRsEntry 2 } tcn1dayDataTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataTmDMRRsEntry 3 } tcn1dayDataTmDMRRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 1 day (Through Mode)DMR RS Monitoring Alarm." ::= { tcn1dayDataTmDMRRsEntry 4 } tcn1dayDataChannelizedModeGroup OBJECT IDENTIFIER ::= { tcn1dayDataCableGroup 2 } tcn1dayDataChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day PMON for Channelized Mode RS Layer of STM-1." ::= { tcn1dayDataChannelizedModeGroup 1 } tcn1dayDataChRsEntry OBJECT-TYPE SYNTAX Tcn1dayDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayDataChRsIfIndex, tcn1dayDataChRsMonitorName } ::= { tcn1dayDataChRsTable 1 } Tcn1dayDataChRsEntry ::= SEQUENCE { tcn1dayDataChRsIfIndex InterfaceIndex, tcn1dayDataChRsMonitorName INTEGER, tcn1dayDataChRsNEAddress IpAddress, tcn1dayDataChRs SeverityValue } tcn1dayDataChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataChRsEntry 1 } tcn1dayDataChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayDataChRsEntry 2 } tcn1dayDataChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataChRsEntry 3 } tcn1dayDataChRs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 1 day (Channelized Mode) RS Monitoring Alarm per counting item." ::= { tcn1dayDataChRsEntry 4 } tcn1dayDataChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day PMON for Channelized Mode MS Layer of STM-1." ::= { tcn1dayDataChannelizedModeGroup 2 } tcn1dayDataChMsEntry OBJECT-TYPE SYNTAX Tcn1dayDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayDataChMsIfIndex, tcn1dayDataChMsMonitorName } ::= { tcn1dayDataChMsTable 1 } Tcn1dayDataChMsEntry ::= SEQUENCE { tcn1dayDataChMsIfIndex InterfaceIndex, tcn1dayDataChMsMonitorName INTEGER, tcn1dayDataChMsNEAddress IpAddress, tcn1dayDataChMs SeverityValue } tcn1dayDataChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataChMsEntry 1 } tcn1dayDataChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayDataChMsEntry 2 } tcn1dayDataChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataChMsEntry 3 } tcn1dayDataChMs OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN STM-1 1 day (Channelized Mode) MS Monitoring Alarm." ::= { tcn1dayDataChMsEntry 4 } tcn1dayData16E1Group OBJECT IDENTIFIER ::= { tcn1dayDataCableGroup 3 } tcn1dayData16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day PMON for E1 Channel." ::= { tcn1dayData16E1Group 1 } tcn1dayData16E1PdhEntry OBJECT-TYPE SYNTAX Tcn1dayData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayData16E1PdhIfIndex, tcn1dayData16E1PdhMonitorName } ::= { tcn1dayData16E1PdhTable 1 } Tcn1dayData16E1PdhEntry ::= SEQUENCE { tcn1dayData16E1PdhIfIndex InterfaceIndex, tcn1dayData16E1PdhMonitorName INTEGER, tcn1dayData16E1PdhNEAddress IpAddress, tcn1dayData16E1Pdh SeverityValue } tcn1dayData16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayData16E1PdhEntry 1 } tcn1dayData16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { cv(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The index value shows counting item." ::= { tcn1dayData16E1PdhEntry 2 } tcn1dayData16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayData16E1PdhEntry 3 } tcn1dayData16E1Pdh OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "TCN 1 day E1 CV Alarm." ::= { tcn1dayData16E1PdhEntry 4 } tcn15minDataRmonGroup OBJECT IDENTIFIER ::= { asTCNGroup 5 } tcn15minDataRmonTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn15minDataRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 15 minutes RMON for Ethernet Port." ::= { tcn15minDataRmonGroup 1 } tcn15minDataRmonEntry OBJECT-TYPE SYNTAX Tcn15minDataRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn15minRmonIfIndex } ::= { tcn15minDataRmonTable 1 } Tcn15minDataRmonEntry ::= SEQUENCE { tcn15minRmonIfIndex InterfaceIndex, tcn15minRmonNEAddress IpAddress, tcn15minHCRxEthStatsDropEvents SeverityValue, tcn15minHCRxEthStatsUndersizePkts SeverityValue, tcn15minHCRxEthStatsFragments SeverityValue, tcn15minHCRxEthStatsCRCAlignErrors SeverityValue, tcn15minHCRxEthStatsOversizePkts SeverityValue, tcn15minHCTxEthStatsCollisions SeverityValue } tcn15minRmonIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn15minDataRmonEntry 1 } tcn15minRmonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn15minDataRmonEntry 2 } tcn15minHCRxEthStatsDropEvents OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes RX Drop Events Alarm" ::= { tcn15minDataRmonEntry 3 } tcn15minHCRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes RX Undersize Packets Alarm." ::= { tcn15minDataRmonEntry 4 } tcn15minHCRxEthStatsFragments OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes RX Fragments Alarm." ::= { tcn15minDataRmonEntry 5 } tcn15minHCRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes RX CRC Alignment Errors Alarm." ::= { tcn15minDataRmonEntry 6 } tcn15minHCRxEthStatsOversizePkts OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes RX Oversize Packets Alarm." ::= { tcn15minDataRmonEntry 7 } tcn15minHCTxEthStatsCollisions OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 15 minutes TX Collisions Alarm." ::= { tcn15minDataRmonEntry 8 } tcn1dayDataRmonGroup OBJECT IDENTIFIER ::= { asTCNGroup 6 } tcn1dayDataRmonTable OBJECT-TYPE SYNTAX SEQUENCE OF Tcn1dayDataRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Threshold Crossing Alarm of 1 day RMON for Ethernet Port" ::= { tcn1dayDataRmonGroup 1 } tcn1dayDataRmonEntry OBJECT-TYPE SYNTAX Tcn1dayDataRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tcn1dayRmonIfIndex } ::= { tcn1dayDataRmonTable 1 } Tcn1dayDataRmonEntry ::= SEQUENCE { tcn1dayRmonIfIndex InterfaceIndex, tcn1dayRmonNEAddress IpAddress, tcn1dayHCRxEthStatsDropEvents SeverityValue, tcn1dayHCRxEthStatsUndersizePkts SeverityValue, tcn1dayHCRxEthStatsFragments SeverityValue, tcn1dayHCRxEthStatsCRCAlignErrors SeverityValue, tcn1dayHCRxEthStatsOversizePkts SeverityValue, tcn1dayHCTxEthStatsCollisions SeverityValue } tcn1dayRmonIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { tcn1dayDataRmonEntry 1 } tcn1dayRmonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { tcn1dayDataRmonEntry 2 } tcn1dayHCRxEthStatsDropEvents OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day RX Drop Events Alarm" ::= { tcn1dayDataRmonEntry 3 } tcn1dayHCRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day RX Undersize Packets Alarm." ::= { tcn1dayDataRmonEntry 4 } tcn1dayHCRxEthStatsFragments OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day RX Fragments Alarm." ::= { tcn1dayDataRmonEntry 5 } tcn1dayHCRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day RX CRC Alignment Errors Alarm." ::= { tcn1dayDataRmonEntry 6 } tcn1dayHCRxEthStatsOversizePkts OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day RX Oversize Packets Alarm." ::= { tcn1dayDataRmonEntry 7 } tcn1dayHCTxEthStatsCollisions OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "RMON(Ethernet Port) TCN 1 day TX Collisions Alarm." ::= { tcn1dayDataRmonEntry 8 } asHkGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 10 } hkInputStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HkInputStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AUX HK Input Status" ::= { asHkGroup 1 } hkInputStatusEntry OBJECT-TYPE SYNTAX HkInputStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hkInputStatusIndex } ::= { hkInputStatusTable 1 } HkInputStatusEntry ::= SEQUENCE { hkInputStatusIndex INTEGER, hkInputStatusNEAddress IpAddress, hkInputAlarm SeverityValue, hkInputStatus INTEGER } hkInputStatusIndex OBJECT-TYPE SYNTAX INTEGER { hkInput1(1), hkInput2(2), hkInput3(3), hkInput4(4), hkInput5(5), hkInput6(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { hkInputStatusEntry 1 } hkInputStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { hkInputStatusEntry 2 } hkInputAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX HK IN Alarm." ::= { hkInputStatusEntry 3 } hkInputStatus OBJECT-TYPE SYNTAX INTEGER { eventOff(1), eventOn(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "AUX HK IN Status." ::= { hkInputStatusEntry 4 } hkOutputStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HkOutputStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AUX HK Output Status" ::= { asHkGroup 2 } hkOutputStatusEntry OBJECT-TYPE SYNTAX HkOutputStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hkOutputStatusIndex } ::= { hkOutputStatusTable 1 } HkOutputStatusEntry ::= SEQUENCE { hkOutputStatusIndex INTEGER, hkOutputStatusNEAddress IpAddress, hkOutputStatusValue OffOnValue } hkOutputStatusIndex OBJECT-TYPE SYNTAX INTEGER { hkOutput1(1), hkOutput2(2), hkOutput3(3), hkOutput4(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { hkOutputStatusEntry 1 } hkOutputStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { hkOutputStatusEntry 2 } hkOutputStatusValue OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "AUX HK OUT Status" ::= { hkOutputStatusEntry 3 } clusterAlarmGroup OBJECT IDENTIFIER ::= { asHkGroup 3 } clusterAlarmInTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusterAlarmInEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Cluster Alarm Input (Cluster Alarm to Peer Equipment) Status" ::= { clusterAlarmGroup 1 } clusterAlarmInEntry OBJECT-TYPE SYNTAX ClusterAlarmInEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { clusterAlarmInIfIndex } ::= { clusterAlarmInTable 1 } ClusterAlarmInEntry ::= SEQUENCE { clusterAlarmInIfIndex InterfaceIndex, clusterAlarmInNEAddress IpAddress, clusterAlarmInStatus INTEGER } clusterAlarmInIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { clusterAlarmInEntry 1 } clusterAlarmInNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { clusterAlarmInEntry 2 } clusterAlarmInStatus OBJECT-TYPE SYNTAX INTEGER { alarm(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Cluster Alarm Input Status." ::= { clusterAlarmInEntry 3 } clusterAlarmOutTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusterAlarmOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Cluster Alarm Output (Cluster Alarm from Peer Equipment) Status" ::= { clusterAlarmGroup 2 } clusterAlarmOutEntry OBJECT-TYPE SYNTAX ClusterAlarmOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { clusterAlarmOutIndex } ::= { clusterAlarmOutTable 1 } ClusterAlarmOutEntry ::= SEQUENCE { clusterAlarmOutIndex Integer32, clusterAlarmOutNEAddress IpAddress, clusterAlarmOutStatus INTEGER } clusterAlarmOutIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { clusterAlarmOutEntry 1 } clusterAlarmOutNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { clusterAlarmOutEntry 2 } clusterAlarmOutStatus OBJECT-TYPE SYNTAX INTEGER { alarm(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM Cluster Alarm Out." ::= { clusterAlarmOutEntry 3 } asStm1Group OBJECT IDENTIFIER ::= { alarmStatusGroup 11 } asStm1ChPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AsStm1ChPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status Information of STM-1 Channelized Mode. This table is not used when the STM-1 Port is running on Through Mode." ::= { asStm1Group 1 } asStm1ChPortEntry OBJECT-TYPE SYNTAX AsStm1ChPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asStm1ChPortIfIndex } ::= { asStm1ChPortTable 1 } AsStm1ChPortEntry ::= SEQUENCE { asStm1ChPortIfIndex InterfaceIndex, asStm1ChPortNEAddress IpAddress, msAisAlarm SeverityValue, msRdiAlarm SeverityValue, pjeStatus INTEGER, auAisAlarm SeverityValue, auLopAlarm SeverityValue, hpUnequipedAlarm SeverityValue, hpTimAlarm SeverityValue, hpPlmAlarm SeverityValue, hpRdiAlarm SeverityValue, lomAlarm SeverityValue, higherOrderPathTraceReceivedValue DisplayString, lowerOrderPathTraceReceivedValue DisplayString } asStm1ChPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asStm1ChPortEntry 1 } asStm1ChPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asStm1ChPortEntry 2 } msAisAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 MS AIS Alarm." ::= { asStm1ChPortEntry 3 } msRdiAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 MS RDI Alarm." ::= { asStm1ChPortEntry 4 } pjeStatus OBJECT-TYPE SYNTAX INTEGER { noDetected(1), detected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 PJE Status." ::= { asStm1ChPortEntry 5 } auAisAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 AU AIS Alarm." ::= { asStm1ChPortEntry 6 } auLopAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 AU LOP Alarm." ::= { asStm1ChPortEntry 7 } hpUnequipedAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 HP UNEQ Alarm." ::= { asStm1ChPortEntry 8 } hpTimAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 HP TIM Alarm" ::= { asStm1ChPortEntry 9 } hpPlmAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 HP PLM Alarm" ::= { asStm1ChPortEntry 10 } hpRdiAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 HP RDI Alarm" ::= { asStm1ChPortEntry 11 } lomAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LOM Alarm." ::= { asStm1ChPortEntry 12 } higherOrderPathTraceReceivedValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 HP Trace Received Value." ::= { asStm1ChPortEntry 13 } lowerOrderPathTraceReceivedValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LP Trace Received Value." ::= { asStm1ChPortEntry 14 } asStm1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF AsStm1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status Information of STM-1 Interface." ::= { asStm1Group 2 } asStm1PortEntry OBJECT-TYPE SYNTAX AsStm1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asStm1PortIfIndex } ::= { asStm1PortTable 1 } AsStm1PortEntry ::= SEQUENCE { asStm1PortIfIndex InterfaceIndex, asStm1PortNEAddress IpAddress, portTypeMismatchAlarm SeverityValue, portRemovedAlarm SeverityValue, stm1LosAlarm SeverityValue, tfAlarm SeverityValue, rsLofAlarm SeverityValue, rsTimAlarm SeverityValue, rsExcAlarm SeverityValue, rsDegAlarm SeverityValue, rsUasStatus INTEGER, sectionTraceReceivedValue DisplayString, alsStatus OffOnValue, sdhAisGenStatus INTEGER, stm1LoopbackStatus INTEGER, stm1LaserShutdownStatus OffOnValue } asStm1PortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asStm1PortEntry 1 } asStm1PortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asStm1PortEntry 2 } portTypeMismatchAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 SFP Type Mismatch Alarm." ::= { asStm1PortEntry 3 } portRemovedAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 SFP Removed Alarm." ::= { asStm1PortEntry 4 } stm1LosAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LOS Alarm." ::= { asStm1PortEntry 5 } tfAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Transmit FAIL Alarm." ::= { asStm1PortEntry 6 } rsLofAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RS LOF Alarm." ::= { asStm1PortEntry 7 } rsTimAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RS TIM Alarm." ::= { asStm1PortEntry 8 } rsExcAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RS EXC Alarm." ::= { asStm1PortEntry 9 } rsDegAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RS DEG Alarm." ::= { asStm1PortEntry 10 } rsUasStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), uas(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RS UAS Status" ::= { asStm1PortEntry 11 } sectionTraceReceivedValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Section Trace Received Value." ::= { asStm1PortEntry 12 } alsStatus OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 ALS Status" ::= { asStm1PortEntry 13 } sdhAisGenStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), generated(2), shutdown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 AIS Generated Status." ::= { asStm1PortEntry 14 } stm1LoopbackStatus OBJECT-TYPE SYNTAX INTEGER { ne(1), fe(2), normal(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Loopback Status." ::= { asStm1PortEntry 15 } stm1LaserShutdownStatus OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Laser Shutdown status." ::= { asStm1PortEntry 16 } asStm1ChTable OBJECT-TYPE SYNTAX SEQUENCE OF AsStm1ChEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status Information of STM-1 Channelized. This table is created per E1 channel allocated to the STM-1 interface." ::= { asStm1Group 3 } asStm1ChEntry OBJECT-TYPE SYNTAX AsStm1ChEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asStm1ChIfIndex } ::= { asStm1ChTable 1 } AsStm1ChEntry ::= SEQUENCE { asStm1ChIfIndex InterfaceIndex, asStm1ChNEAddress IpAddress, tuAisAlarm SeverityValue, tuLopAlarm SeverityValue, lpUnequipedAlarm SeverityValue, lpRdiAlarm SeverityValue, lpPlmAlarm SeverityValue, slpAisGenStatus INTEGER } asStm1ChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asStm1ChEntry 1 } asStm1ChNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asStm1ChEntry 2 } tuAisAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 TU AIS Alarm." ::= { asStm1ChEntry 3 } tuLopAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 TU LOP Alarm." ::= { asStm1ChEntry 4 } lpUnequipedAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LP UNEQ Alarm." ::= { asStm1ChEntry 5 } lpRdiAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LP RDI Alarm." ::= { asStm1ChEntry 6 } lpPlmAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 LP PLM Alarm." ::= { asStm1ChEntry 7 } slpAisGenStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), generated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 E1 AIS Generated Status." ::= { asStm1ChEntry 8 } asStm1CardTable OBJECT-TYPE SYNTAX SEQUENCE OF AsStm1CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status information of STM-1 Card." ::= { asStm1Group 4 } asStm1CardEntry OBJECT-TYPE SYNTAX AsStm1CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asStm1CardIndex } ::= { asStm1CardTable 1 } AsStm1CardEntry ::= SEQUENCE { asStm1CardIndex Integer32, asStm1CardNEAddress IpAddress, stm1Alarm SeverityValue, stm1ComFailAlarm SeverityValue, stm1Unequipped SeverityValue, stm1TypeMismatch SeverityValue, stm1BusErrorTx SeverityValue, stm1BusErrorRx SeverityValue } asStm1CardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asStm1CardEntry 1 } asStm1CardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asStm1CardEntry 2 } stm1Alarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Module Alarm." ::= { asStm1CardEntry 3 } stm1ComFailAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Communication FAIL Alarm." ::= { asStm1CardEntry 4 } stm1Unequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Unequipped Alarm." ::= { asStm1CardEntry 5 } stm1TypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 Type Mismatch Alarm." ::= { asStm1CardEntry 6 } stm1BusErrorTx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 TX Bus Error Alarm." ::= { asStm1CardEntry 7 } stm1BusErrorRx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "STM-1 RX Bus Error Alarm." ::= { asStm1CardEntry 8 } asE1Group OBJECT IDENTIFIER ::= { alarmStatusGroup 12 } asE1CardTable OBJECT-TYPE SYNTAX SEQUENCE OF AsE1CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status information of 16E1 Card." ::= { asE1Group 1 } asE1CardEntry OBJECT-TYPE SYNTAX AsE1CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asE1CardIndex } ::= { asE1CardTable 1 } AsE1CardEntry ::= SEQUENCE { asE1CardIndex Integer32, asE1CardNEAddress IpAddress, e1Alarm SeverityValue, e1ComFailAlarm SeverityValue, e1Unequipped SeverityValue, e1TypeMismatch SeverityValue, e1BusErrorTx SeverityValue, e1BusErrorRx SeverityValue } asE1CardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asE1CardEntry 1 } asE1CardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asE1CardEntry 2 } e1Alarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 Module Alarm." ::= { asE1CardEntry 3 } e1ComFailAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 Communication FAIL Alarm." ::= { asE1CardEntry 4 } e1Unequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 Unequipped Alarm." ::= { asE1CardEntry 5 } e1TypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 Type Mismatch Alarm." ::= { asE1CardEntry 6 } e1BusErrorTx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 TX Bus Error Alarm." ::= { asE1CardEntry 7 } e1BusErrorRx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "16E1 RX Bus Error Alarm." ::= { asE1CardEntry 8 } asE1ChTable OBJECT-TYPE SYNTAX SEQUENCE OF AsE1ChEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status information of E1 Channel." ::= { asE1Group 2 } asE1ChEntry OBJECT-TYPE SYNTAX AsE1ChEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asE1ChIfIndex } ::= { asE1ChTable 1 } AsE1ChEntry ::= SEQUENCE { asE1ChIfIndex InterfaceIndex, asE1ChNEAddress IpAddress, chUsageAlarm SeverityValue, e1LosAlarm SeverityValue, ppiAisAlarm SeverityValue, e1AisGenStatus INTEGER, e1LoopbackStatus INTEGER, ppiAisStatus INTEGER } asE1ChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asE1ChEntry 1 } asE1ChNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asE1ChEntry 2 } chUsageAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel Usage Error Alarm." ::= { asE1ChEntry 3 } e1LosAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel LOS Alarm." ::= { asE1ChEntry 4 } ppiAisAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel AIS Alarm." ::= { asE1ChEntry 5 } e1AisGenStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), generated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel AIS Generated Status." ::= { asE1ChEntry 6 } e1LoopbackStatus OBJECT-TYPE SYNTAX INTEGER { ne(1), fe(2), normal(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel Loopback Status." ::= { asE1ChEntry 7 } ppiAisStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), ais(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Channel AIS Status." ::= { asE1ChEntry 8 } asETHGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 13 } asRstpGroup OBJECT IDENTIFIER ::= { asETHGroup 2 } asRstpBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF AsRstpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status information of RSTP." ::= { asRstpGroup 1 } asRstpBridgeEntry OBJECT-TYPE SYNTAX AsRstpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asRstpBridgeIndex } ::= { asRstpBridgeTable 1 } AsRstpBridgeEntry ::= SEQUENCE { asRstpBridgeIndex Integer32, asRstpBridgeNEAddress IpAddress, asRstpBridgeDesignatedRoot BridgeId, asRstpBridgeTopChanges Integer32 } asRstpBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asRstpBridgeEntry 1 } asRstpBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asRstpBridgeEntry 2 } asRstpBridgeDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the root of the spanning tree." ::= { asRstpBridgeEntry 3 } asRstpBridgeTopChanges OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP Topology Changed Status. The total number of topology chagnes detected by this bridge since the equipment was last initialized." ::= { asRstpBridgeEntry 4 } asRstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AsRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm / Status information of RSTP per Ethernet Port." ::= { asRstpGroup 2 } asRstpPortEntry OBJECT-TYPE SYNTAX AsRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asRstpIfIndex } ::= { asRstpPortTable 1 } AsRstpPortEntry ::= SEQUENCE { asRstpIfIndex InterfaceIndex, asRstpPortNEAddress IpAddress, asRstpPortRole INTEGER, asRstpPortState INTEGER, asRstpPortNewRootBridgeDetectedBridgePriority BridgeId, asRstpPortProtocolMigrationVersion INTEGER, asRstpPortPathCost Integer32, asRstpPortInvalidBpduCause INTEGER, asRstpPortDesignatedCost Integer32, asRstpPortDesignatedBridge BridgeId, asRstpPortDesignatedPort OCTET STRING, asRstpPortForwardTransitions Counter32, asRstpPortOperEdgePort INTEGER, asRstpPortOperPointToPoint EnableDisableValue } asRstpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asRstpPortEntry 1 } asRstpPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asRstpPortEntry 2 } asRstpPortRole OBJECT-TYPE SYNTAX INTEGER { disabledPort(1), alternatePort(2), backupPort(3), rootPort(4), designatedPort(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP Port Role. The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame." ::= { asRstpPortEntry 3 } asRstpPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6), discarding(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP Port Status. The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame." ::= { asRstpPortEntry 4 } asRstpPortNewRootBridgeDetectedBridgePriority OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP New Bridge Detect Status. The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs." ::= { asRstpPortEntry 5 } asRstpPortProtocolMigrationVersion OBJECT-TYPE SYNTAX INTEGER { stp(1), rstp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP Protocol Migration. The port's operating protocol version." ::= { asRstpPortEntry 6 } asRstpPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The port's path cost, defined by application depends on its port speed." ::= { asRstpPortEntry 7 } asRstpPortInvalidBpduCause OBJECT-TYPE SYNTAX INTEGER { restore(0), protocolID(1), bpduType(2), tcnLength(3), rstpLength(4), configLength(5), maxAge(6), fwdDelay(7), helloTime(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "RSTP Invalid BPDU Received. The event status of invalid BPDU received." ::= { asRstpPortEntry 8 } asRstpPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The path cost of the Designated Port of the segment connected to this port." ::= { asRstpPortEntry 9 } asRstpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the bridge that this port considers to be the designated Bridge for this port's segment." ::= { asRstpPortEntry 10 } asRstpPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The port identifier of the port on the designated bridge for this port's segment." ::= { asRstpPortEntry 11 } asRstpPortForwardTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this port has transitioned from the learning state to the forwarding state." ::= { asRstpPortEntry 12 } asRstpPortOperEdgePort OBJECT-TYPE SYNTAX INTEGER { alarmOff(0), alarmOn(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the edge port parameter. This object is initialized to 'alarmOff'. This object will be changed to 'alarmOn' on reception of a BPDU if the corresponding 'provRstpExtPortAdminEdgePort' is set to 'enabled'." ::= { asRstpPortEntry 13 } asRstpPortOperPointToPoint OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the point-to-point port parameter." ::= { asRstpPortEntry 14 } asEthOamGroup OBJECT IDENTIFIER ::= { asETHGroup 3 } asEthOamCcGroup OBJECT IDENTIFIER ::= { asEthOamGroup 1 } asEthOamMepCcmFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF AsEthOamMepCcmFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-CC Fault Management Table" ::= { asEthOamCcGroup 1 } asEthOamMepCcmFaultEntry OBJECT-TYPE SYNTAX AsEthOamMepCcmFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asEthOamMepCcmIndex } ::= { asEthOamMepCcmFaultTable 1 } AsEthOamMepCcmFaultEntry ::= SEQUENCE { asEthOamMepCcmIndex IpeMepId, asEthOamMepCcmFaultNEAddress IpAddress, asEthOamMepCcmLOC SeverityValue, asEthOamMepCcmRdiReceived SeverityValue, asEthOamMepCcmMismergeCondition SeverityValue, asEthOamMepCcmUnexpectedMepCondition SeverityValue } asEthOamMepCcmIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asEthOamMepCcmFaultEntry 1 } asEthOamMepCcmFaultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asEthOamMepCcmFaultEntry 2 } asEthOamMepCcmLOC OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-OAM LOC Alarm. The MEP is not receiveing valid CCM from at least one of the remote MEP." ::= { asEthOamMepCcmFaultEntry 3 } asEthOamMepCcmRdiReceived OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-OAM RDI Alarm. A remote MEP is reported the RDI in is last CCM." ::= { asEthOamMepCcmFaultEntry 4 } asEthOamMepCcmMismergeCondition OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "obsoleted" ::= { asEthOamMepCcmFaultEntry 5 } asEthOamMepCcmUnexpectedMepCondition OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "obsoleted" ::= { asEthOamMepCcmFaultEntry 6 } asEthOamMepCcmDbTable OBJECT-TYPE SYNTAX SEQUENCE OF AsEthOamMepCcmDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-CCM Database Table" ::= { asEthOamCcGroup 2 } asEthOamMepCcmDbEntry OBJECT-TYPE SYNTAX AsEthOamMepCcmDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asEthOamMepCcmDbPeerMepIndex } ::= { asEthOamMepCcmDbTable 1 } AsEthOamMepCcmDbEntry ::= SEQUENCE { asEthOamMepCcmDbPeerMepIndex IpeMepId, asEthOamMepCcmDbNEAddress IpAddress, asEthOamMepCcmDbMepIndex IpeMepId, asEthOamMepCcmDbPeerMepId Integer32, asEthOamMepCcmDbMepId Integer32, asEthOamMepCcmDbCondition TruthValue, asEthOamMepCcmDbRdiReceived TruthValue } asEthOamMepCcmDbPeerMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asEthOamMepCcmDbEntry 1 } asEthOamMepCcmDbNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asEthOamMepCcmDbEntry 2 } asEthOamMepCcmDbMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative Mep Index of own MEP." ::= { asEthOamMepCcmDbEntry 3 } asEthOamMepCcmDbPeerMepId OBJECT-TYPE SYNTAX Integer32 (0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "this object represents protocol sense MEP ID of peer MEP." ::= { asEthOamMepCcmDbEntry 4 } asEthOamMepCcmDbMepId OBJECT-TYPE SYNTAX Integer32 (0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "this object represents protocol sense MEP ID of local MEP." ::= { asEthOamMepCcmDbEntry 5 } asEthOamMepCcmDbCondition OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of LOC detection per Peer MEP." ::= { asEthOamMepCcmDbEntry 6 } asEthOamMepCcmDbRdiReceived OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of RDI receive status per peer MEP." ::= { asEthOamMepCcmDbEntry 7 } asEthOamMegCcmFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF AsEthOamMegCcmFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-CC Fault Management Table(MEG)" ::= { asEthOamCcGroup 3 } asEthOamMegCcmFaultEntry OBJECT-TYPE SYNTAX AsEthOamMegCcmFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asEthOamMegCcmIndex } ::= { asEthOamMegCcmFaultTable 1 } AsEthOamMegCcmFaultEntry ::= SEQUENCE { asEthOamMegCcmIndex Integer32, asEthOamMegCcmFaultNEAddress IpAddress, asEthOamMegCcmMismergeCondition SeverityValue, asEthOamMegCcmUnexpectedMepCondition SeverityValue } asEthOamMegCcmIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asEthOamMegCcmFaultEntry 1 } asEthOamMegCcmFaultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asEthOamMegCcmFaultEntry 2 } asEthOamMegCcmMismergeCondition OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-OAM Mismerge Alarm. The MEP received a CCM frame with correct MEG level but an incorrect MEG ID (Maintenance Domain Name)." ::= { asEthOamMegCcmFaultEntry 3 } asEthOamMegCcmUnexpectedMepCondition OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-OAM Unexpected MEP Alarm. The MEP Received a CCM frame with the correct MEG level and MEG ID, but unexpected MEP ID." ::= { asEthOamMegCcmFaultEntry 4 } asEthOamAisGroup OBJECT IDENTIFIER ::= { asEthOamGroup 2 } asEthOamAisTable OBJECT-TYPE SYNTAX SEQUENCE OF AsEthOamAisEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "ETH-AIS Status Table" ::= { asEthOamAisGroup 1 } asEthOamAisEntry OBJECT-TYPE SYNTAX AsEthOamAisEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { asEthOamAisMepIndex } ::= { asEthOamAisTable 1 } AsEthOamAisEntry ::= SEQUENCE { asEthOamAisMepIndex IpeMepId, asEthOamAisNEAddress IpAddress, asEthOamAisCondition SeverityValue, asEthOamAisPeriod INTEGER } asEthOamAisMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { asEthOamAisEntry 1 } asEthOamAisNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { asEthOamAisEntry 2 } asEthOamAisCondition OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "obsoleted" ::= { asEthOamAisEntry 3 } asEthOamAisPeriod OBJECT-TYPE SYNTAX INTEGER { invalid(0), period-1s(4), period-1min(6) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "obsoleted" ::= { asEthOamAisEntry 4 } asFdbGroup OBJECT IDENTIFIER ::= { asETHGroup 6 } asFdbEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF AsFdbEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding Database Status per Equipment." ::= { asFdbGroup 1 } asFdbEquipmentEntry OBJECT-TYPE SYNTAX AsFdbEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asFdbEquipmentIndex } ::= { asFdbEquipmentTable 1 } AsFdbEquipmentEntry ::= SEQUENCE { asFdbEquipmentIndex Integer32, asFdbEquipmentNEAddress IpAddress, asFdbEquipmentLearningCount Gauge32, asFdbEquipmentLearningLimitOver INTEGER } asFdbEquipmentIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asFdbEquipmentEntry 1 } asFdbEquipmentNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asFdbEquipmentEntry 2 } asFdbEquipmentLearningCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total FDB Dynamic Entry Count. the number of forwarding entries which is learned currently." ::= { asFdbEquipmentEntry 3 } asFdbEquipmentLearningLimitOver OBJECT-TYPE SYNTAX INTEGER { notReached(1), reached(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Total FDB Full. learning limit status. When 'asFdbEquipmentLearningCount' reaches 'provFdbEquipmentNumberOfLearningEntry', this object will be changed to 'reached'." ::= { asFdbEquipmentEntry 4 } asFdbPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AsFdbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { asFdbGroup 2 } asFdbPortEntry OBJECT-TYPE SYNTAX AsFdbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding Database Status per port." INDEX { asFdbPortIfIndex } ::= { asFdbPortTable 1 } AsFdbPortEntry ::= SEQUENCE { asFdbPortIfIndex InterfaceIndex, asFdbPortNEAddress IpAddress, asFdbPortLearningCount Gauge32, asFdbPortLearningLimitOver INTEGER } asFdbPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asFdbPortEntry 1 } asFdbPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asFdbPortEntry 2 } asFdbPortLearningCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "FDB Dynamic Entry Count. The number of forwarding entries which is learned currently." ::= { asFdbPortEntry 3 } asFdbPortLearningLimitOver OBJECT-TYPE SYNTAX INTEGER { notReached(1), reached(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "FDB Full. learning limit status. When 'asFdbPortLearningCount' reaches corresponding 'provFdbPortLearningLimit', this object will be changed to 'reached'." ::= { asFdbPortEntry 4 } asFdbVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF AsFdbVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding Database status per VLAN." ::= { asFdbGroup 3 } asFdbVlanEntry OBJECT-TYPE SYNTAX AsFdbVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asFdbVlanIndex } ::= { asFdbVlanTable 1 } AsFdbVlanEntry ::= SEQUENCE { asFdbVlanIndex Integer32, asFdbVlanNEAddress IpAddress, asFdbVlanLearningCount Gauge32, asFdbVlanLearningLimitOver INTEGER } asFdbVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asFdbVlanEntry 1 } asFdbVlanNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asFdbVlanEntry 2 } asFdbVlanLearningCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "FDB Dynamic Entry Count per VLAN. The number of forwarding entries which is learned currently." ::= { asFdbVlanEntry 3 } asFdbVlanLearningLimitOver OBJECT-TYPE SYNTAX INTEGER { notReached(1), reached(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "FDB Full Per VLAN. Learning limit status. When 'asFdbVlanLearningCount' reaches corresponding 'provFdbVlanNumberOfLearningEntry', this object will be changed to 'reached'." ::= { asFdbVlanEntry 4 } asLlfGroup OBJECT IDENTIFIER ::= { asETHGroup 7 } asLlfGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AsLlfGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Loss Forwarding(LLF) Status per LLF Group." ::= { asLlfGroup 1 } asLlfGroupEntry OBJECT-TYPE SYNTAX AsLlfGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asLlfGroupIndex } ::= { asLlfGroupTable 1 } AsLlfGroupEntry ::= SEQUENCE { asLlfGroupIndex Integer32, asLlfGroupNEAddress IpAddress, asLlfGroupForceClose INTEGER, asLlfGroupTimeout INTEGER } asLlfGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asLlfGroupEntry 1 } asLlfGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asLlfGroupEntry 2 } asLlfGroupForceClose OBJECT-TYPE SYNTAX INTEGER { not-forceclose(1), forceclose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "LLF close status. 'forceclose' means that edge port which is assigned to the LLF group is closed because of LLF." ::= { asLlfGroupEntry 3 } asLlfGroupTimeout OBJECT-TYPE SYNTAX INTEGER { received(1), timeout(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "LLF Timeout Status. The periodic LLF messages is not received." ::= { asLlfGroupEntry 4 } asLlfReceiveInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AsLlfReceiveInfoEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Link Loss Forwarding (LLF) Status per port." ::= { asLlfGroup 2 } asLlfReceiveInfoEntry OBJECT-TYPE SYNTAX AsLlfReceiveInfoEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { asLlfReceiveInfoIfIndex, asLlfReceiveInfoGroupIndex } ::= { asLlfReceiveInfoTable 1 } AsLlfReceiveInfoEntry ::= SEQUENCE { asLlfReceiveInfoIfIndex InterfaceIndex, asLlfReceiveInfoGroupIndex Integer32, asLlfReceiveInfoNEAddress IpAddress, asLlfReceiveInfoLinkSts INTEGER } asLlfReceiveInfoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { asLlfReceiveInfoEntry 1 } asLlfReceiveInfoGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { asLlfReceiveInfoEntry 2 } asLlfReceiveInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { asLlfReceiveInfoEntry 3 } asLlfReceiveInfoLinkSts OBJECT-TYPE SYNTAX INTEGER { down(1), up(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "LLF Link Information which is received from peer." ::= { asLlfReceiveInfoEntry 4 } asETHPortGroup OBJECT IDENTIFIER ::= { asETHGroup 8 } asETHPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AsETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Port Status Table." ::= { asETHPortGroup 1 } asETHPortEntry OBJECT-TYPE SYNTAX AsETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asETHPortIfIndex } ::= { asETHPortTable 1 } AsETHPortEntry ::= SEQUENCE { asETHPortIfIndex InterfaceIndex, asETHPortNEAddress IpAddress, asETHPortInterfaceType INTEGER, asETHPortSpeedDuplex INTEGER, asETHPortFlowControl INTEGER, asETHPortMDIMDIX INTEGER, asETHPortLinkStatus SeverityValue, asETHPortAdminStatus INTEGER, asETHPortSFPEquip SeverityValue, asETHPortSFPLos SeverityValue, asETHPortSFPTxError SeverityValue, asETHPortSFPTypeMismatch SeverityValue, asETHPortOperStatus INTEGER, asETHPortLlfOamReceived INTEGER } asETHPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asETHPortEntry 1 } asETHPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asETHPortEntry 2 } asETHPortInterfaceType OBJECT-TYPE SYNTAX INTEGER { invalid(0), fiber(1), copper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE SFP Port Type Status. This object represents interface type which is installed currently." ::= { asETHPortEntry 3 } asETHPortSpeedDuplex OBJECT-TYPE SYNTAX INTEGER { invalid(0), s10M-HALF(1), s10M-FULL(2), s100M-HALF(3), s100M-FULL(4), s1000M-FULL(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Speed & Duplex Status." ::= { asETHPortEntry 4 } asETHPortFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Flow Control Status." ::= { asETHPortEntry 5 } asETHPortMDIMDIX OBJECT-TYPE SYNTAX INTEGER { invalid(0), mdi(1), mdi-x(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE MDI / MDI-X Status." ::= { asETHPortEntry 6 } asETHPortLinkStatus OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE LAN Link Alarm." ::= { asETHPortEntry 7 } asETHPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), force(2), oamSend(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE LLF Status. When the port is closed by LLF, the object will be changed to 'force'. But if 'provLlfPortMode' is configured to 'edgeOamSend', this object will be changed to 'oamSend' when the port is controlled by LLF." ::= { asETHPortEntry 8 } asETHPortSFPEquip OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE SFP Removed Alarm." ::= { asETHPortEntry 9 } asETHPortSFPLos OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE ETH LOS Alarm." ::= { asETHPortEntry 10 } asETHPortSFPTxError OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE ETH TF (Transmit FAIL) Alarm." ::= { asETHPortEntry 11 } asETHPortSFPTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE SFP Type Mismatch Alarm. This object reports that the provisioned interface type and the installed media type are inconsistent." ::= { asETHPortEntry 12 } asETHPortOperStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), linkDown(1), linkUp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE ETH LAN Link Status. This object is not suppressed by the lower layer alarms." ::= { asETHPortEntry 13 } asETHPortLlfOamReceived OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), receive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GbE LLF message receive status. When the port received LLF request messages, the object will return the value 'receive'." ::= { asETHPortEntry 14 } asSyncETHGroup OBJECT IDENTIFIER ::= { asETHGroup 9 } asSyncETHTable OBJECT-TYPE SYNTAX SEQUENCE OF AsSyncETHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sync Ethernet Status table." ::= { asSyncETHGroup 2 } asSyncETHEntry OBJECT-TYPE SYNTAX AsSyncETHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asSyncETHIfIndex } ::= { asSyncETHTable 1 } AsSyncETHEntry ::= SEQUENCE { asSyncETHIfIndex InterfaceIndex, asSyncETHNEAddress IpAddress, asSyncETHPortCLKSts Integer32 } asSyncETHIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this table." ::= { asSyncETHEntry 1 } asSyncETHNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "reserved." ::= { asSyncETHEntry 2 } asSyncETHPortCLKSts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync ETH Port CLK Status." ::= { asSyncETHEntry 3 } asQosGroup OBJECT IDENTIFIER ::= { asETHGroup 10 } asQosTable OBJECT-TYPE SYNTAX SEQUENCE OF AsQosEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Qos Information per port." ::= { asQosGroup 1 } asQosEntry OBJECT-TYPE SYNTAX AsQosEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { asQosPortindex } ::= { asQosTable 1 } AsQosEntry ::= SEQUENCE { asQosPortindex InterfaceIndex, asQosNEAddress IpAddress, asQosAmrBandWidth Integer32 } asQosPortindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { asQosEntry 1 } asQosNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { asQosEntry 2 } asQosAmrBandWidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of Qos bandwidth which is determined by the smaller value of the followings. AMR bandwidth - E1 bandwidth - total EIR bandwidth. Or AMR bandwidth - E1 bandwidth - total CIR bandwidth." ::= { asQosEntry 3 } asETHCardGroup OBJECT IDENTIFIER ::= { asETHGroup 32 } asETHCardTable OBJECT-TYPE SYNTAX SEQUENCE OF AsETHCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH Card Status table." ::= { asETHCardGroup 1 } asETHCardEntry OBJECT-TYPE SYNTAX AsETHCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asETHCardIndex } ::= { asETHCardTable 1 } AsETHCardEntry ::= SEQUENCE { asETHCardIndex Integer32, asETHCardNEAddress IpAddress, ethAlarm SeverityValue, ethComFailAlarm SeverityValue, ethUnequipped SeverityValue, ethTypeMismatch SeverityValue, ethBusErrorTx SeverityValue, ethBusErrorRx SeverityValue } asETHCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asETHCardEntry 1 } asETHCardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asETHCardEntry 2 } ethAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Module Alarm." ::= { asETHCardEntry 3 } ethComFailAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Communication FAIL Alarm." ::= { asETHCardEntry 4 } ethUnequipped OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Unequipped Alarm." ::= { asETHCardEntry 5 } ethTypeMismatch OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE Type Mismatch Alarm." ::= { asETHCardEntry 6 } ethBusErrorTx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE TX Bus Error Alarm." ::= { asETHCardEntry 7 } ethBusErrorRx OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "GbE RX Bus Error Alarm." ::= { asETHCardEntry 8 } asCommonGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 14 } iduCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF IduCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Configuration Status Table." ::= { asCommonGroup 1 } iduCommonEntry OBJECT-TYPE SYNTAX IduCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { iduCommonIndex } ::= { iduCommonTable 1 } IduCommonEntry ::= SEQUENCE { iduCommonIndex INTEGER, iduCommonNEAddress IpAddress, equipConfigStatus Integer32 } iduCommonIndex OBJECT-TYPE SYNTAX INTEGER { iduCommon(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { iduCommonEntry 1 } iduCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { iduCommonEntry 2 } equipConfigStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment Configuration Status. The object is used for determining the status synchronization method for the manager entity." ::= { iduCommonEntry 3 } asCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF AsCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Installed Card Status table." ::= { asCommonGroup 2 } asCommonEntry OBJECT-TYPE SYNTAX AsCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asCommonIndex } ::= { asCommonTable 1 } AsCommonEntry ::= SEQUENCE { asCommonIndex Integer32, asCommonNEAddress IpAddress, asUserInterface INTEGER, asConfigStatus INTEGER, asClk2mType INTEGER, asClk2mConfigStatus INTEGER } asCommonIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asCommonEntry 1 } asCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asCommonEntry 2 } asUserInterface OBJECT-TYPE SYNTAX INTEGER { invalid(0), notUsed(1), modem(2), e1(3), gbex4p(6), mse(9), aux(11), stm1x2p(12), clk2m(13), ps(14), fan(15), term(16), main(17), modemE(19), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Installed card type." ::= { asCommonEntry 3 } asConfigStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), unequipped(1), configured(2), unconfigured(3), mismatch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration status of installed card. The value is determined from provisioned card type and installed card type." ::= { asCommonEntry 4 } asClk2mType OBJECT-TYPE SYNTAX INTEGER { invalid(0), notUsed(1), clk2m(2), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Installed CLK type." ::= { asCommonEntry 5 } asClk2mConfigStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), unequipped(1), configured(2), unconfigured(3), mismatch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration status of CLK card. The value is determined from provisioned CLK type and installed CLK type." ::= { asCommonEntry 6 } asProtectionGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 33 } asStm1ApsTable OBJECT-TYPE SYNTAX SEQUENCE OF AsStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "APS Status Table. This table is created automatically when the APS is configured." ::= { asProtectionGroup 1 } asStm1ApsEntry OBJECT-TYPE SYNTAX AsStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asStm1ApsIfIndex } ::= { asStm1ApsTable 1 } AsStm1ApsEntry ::= SEQUENCE { asStm1ApsIfIndex InterfaceIndex, asStm1ApsNEAddress IpAddress, apsProtectionStatusCh1 INTEGER, apsProtectionStatusCh2 INTEGER, apsOnlineStatus INTEGER, apsLockinStatus INTEGER, apsSwStatus INTEGER } asStm1ApsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asStm1ApsEntry 1 } asStm1ApsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asStm1ApsEntry 2 } apsProtectionStatusCh1 OBJECT-TYPE SYNTAX INTEGER { fs(1), sf(2), sd(3), ms(4), nr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Protection Status for Ch1" ::= { asStm1ApsEntry 3 } apsProtectionStatusCh2 OBJECT-TYPE SYNTAX INTEGER { fs(1), sf(2), sd(3), ms(4), nr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Protection Status for Ch2" ::= { asStm1ApsEntry 4 } apsOnlineStatus OBJECT-TYPE SYNTAX INTEGER { work(1), protection(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Online Status" ::= { asStm1ApsEntry 5 } apsLockinStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), lockin(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Lockin Status" ::= { asStm1ApsEntry 6 } apsSwStatus OBJECT-TYPE SYNTAX INTEGER { work(1), protection(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Switch Status" ::= { asStm1ApsEntry 7 } asLicenseGroup OBJECT IDENTIFIER ::= { alarmStatusGroup 45 } asLicenseAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF AsLicenseAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "License Alarm Table." ::= { asLicenseGroup 1 } asLicenseAlarmEntry OBJECT-TYPE SYNTAX AsLicenseAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { asLicenseAlarmIndex } ::= { asLicenseAlarmTable 1 } AsLicenseAlarmEntry ::= SEQUENCE { asLicenseAlarmIndex Integer32, asLicenseAlarmNEAddress IpAddress, asLicenseAlarm SeverityValue } asLicenseAlarmIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { asLicenseAlarmEntry 1 } asLicenseAlarmNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { asLicenseAlarmEntry 2 } asLicenseAlarm OBJECT-TYPE SYNTAX SeverityValue MAX-ACCESS read-only STATUS current DESCRIPTION "License Alarm. The alarm will be asserted when the configuration and install license are mismatch. The following operations can be trigger the alarm. - license downgrade - multiple chassis configuration (2U XPIC) The alarm will be cleared when the conditions mentioned above are cleared." ::= { asLicenseAlarmEntry 3 } esCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF EsCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure Card information." ::= { equipmentSetUpGroup 1 } esCommonEntry OBJECT-TYPE SYNTAX EsCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries are created automatically per each slot when the agent boots." INDEX { esCommonIndex } ::= { esCommonTable 1 } EsCommonEntry ::= SEQUENCE { esCommonIndex Integer32, esCommonNEAddress IpAddress, esUserInterface INTEGER, esClk2mType INTEGER } esCommonIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { esCommonEntry 1 } esCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { esCommonEntry 2 } esUserInterface OBJECT-TYPE SYNTAX INTEGER { invalid(0), notUsed(1), modem(2), e1(3), gbex4p(6), mse(9), aux(11), stm1x2p(12), clk2m(13), ps(14), fan(15), term(16), main(17), modemE(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Equipment Configuration. This object configures card type to use. If the object is set to 'notUsed' from other value, the related objects are automatically removed. For example, the crossconnect whose end point is located on the removed card, the Ethernt OAM MEP entities, the clock reference on the card, and so on." ::= { esCommonEntry 3 } esClk2mType OBJECT-TYPE SYNTAX INTEGER { invalid(0), notUsed(1), clk2m(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "EXT CLK Type. This object configures Clock card information. This object is available only for SLOT whose card type is ctrl." ::= { esCommonEntry 4 } esModemTable OBJECT-TYPE SYNTAX SEQUENCE OF EsModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure Radio Parameters." ::= { equipmentSetUpGroup 2 } esModemEntry OBJECT-TYPE SYNTAX EsModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { esModemIfIndex } ::= { esModemTable 1 } EsModemEntry ::= SEQUENCE { esModemIfIndex InterfaceIndex, esModemNEAddress IpAddress, esModemTxFreq DisplayString, esModemRxFreq DisplayString, esModemTxPowerCont INTEGER, esModemFrameID Integer32, esModemModulation INTEGER, esModemChSpacing INTEGER, esModemAmrOperation OffOnValue, esModemAmrRangeQPSK OffOnValue, esModemAmrRange16QAM OffOnValue, esModemAmrRange32QAM OffOnValue, esModemAmrRange64QAM OffOnValue, esModemAmrRange128QAM OffOnValue, esModemAmrRange256QAM OffOnValue, esModemConfiguration INTEGER, esModemGroupSetting INTEGER, esModemRadioMode INTEGER, esTdmEtherMapping Integer32, esTdmEtherMappingAmrQPSK Integer32, esTdmEtherMappingAmr16QAM Integer32, esTdmEtherMappingAmr32QAM Integer32, esTdmEtherMappingAmr64QAM Integer32, esTdmEtherMappingAmr128QAM Integer32, esTdmEtherMappingAmr256QAM Integer32, esTdmEtherMappingRst Integer32, esTdmEtherMappingRstAmrQPSK Integer32, esTdmEtherMappingRstAmr16QAM Integer32, esTdmEtherMappingRstAmr32QAM Integer32, esTdmEtherMappingRstAmr64QAM Integer32, esTdmEtherMappingRstAmr128QAM Integer32, esTdmEtherMappingRstAmr256QAM Integer32, esModemAmrRange512QAM OffOnValue, esModemAmrRange1024QAM OffOnValue, esTdmEtherMappingAmr512QAM Integer32, esTdmEtherMappingAmr1024QAM Integer32, esTdmEtherMappingRstAmr512QAM Integer32, esTdmEtherMappingRstAmr1024QAM Integer32, esModemGroupMode INTEGER, esModemAmrRange2048QAM OffOnValue, esTdmEtherMappingAmr2048QAM Integer32, esTdmEtherMappingRstAmr2048QAM Integer32, esModemEthTransparentClockPath Integer32 } esModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { esModemEntry 1 } esModemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { esModemEntry 2 } esModemTxFreq OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) MAX-ACCESS read-write STATUS current DESCRIPTION "Tx RF Frequency." ::= { esModemEntry 3 } esModemRxFreq OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) MAX-ACCESS read-write STATUS current DESCRIPTION "Rx RF Frequency." ::= { esModemEntry 4 } esModemTxPowerCont OBJECT-TYPE SYNTAX INTEGER { invalid(0), mtpc(1), atpc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tx Power Control." ::= { esModemEntry 5 } esModemFrameID OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Frame ID." ::= { esModemEntry 6 } esModemModulation OBJECT-TYPE SYNTAX INTEGER { invalid(0), qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6), qam512(7), qam1024(8), qam2048(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reference Modulation. If the provisioned card does not support the specified modulation or the installed license is not enough, the agent will reject the request. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 7 } esModemChSpacing OBJECT-TYPE SYNTAX INTEGER { invalid(0), cs7m(2), cs14m(3), cs28m(4), cs56m(5), cs40m(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Spacing. If the card does not support the specified parameter, the agent will reject the request. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 8 } esModemAmrOperation OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Operation. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 9 } esModemAmrRangeQPSK OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (QPSK). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 10 } esModemAmrRange16QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Ragne (16QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 11 } esModemAmrRange32QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (32QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 12 } esModemAmrRange64QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (64QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 13 } esModemAmrRange128QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (128QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 14 } esModemAmrRange256QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (256QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 15 } esModemConfiguration OBJECT-TYPE SYNTAX INTEGER { ivalid(0), notUsed(1), used(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configure the MODEM usage. When the object is set to 'notUsed', the corresponding modem will be disabled. This function is available only for the iPASOLINK200." ::= { esModemEntry 16 } esModemGroupSetting OBJECT-TYPE SYNTAX INTEGER { notUsed(0), group1(1), group2(2), group3(3), group4(4), group5(5), group6(6), group7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radio Traffic Aggregation. The modem ports whose 'esModemGroupSetting' has same value construct the Radio Link Aggregation. This configuration is automatically cleared when the SWG configuration ('esSWGConfiguration') is changed." ::= { esModemEntry 17 } esModemRadioMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), highCapacity(1), highSystemGain(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radio Mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 18 } esTdmEtherMapping OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping. This object configures the E1 channel count which is mapped to the radio link. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 19 } esTdmEtherMappingAmrQPSK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (QPSK). This object configures the E1 channel count which is mapped to the radio link running on QPSK on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 20 } esTdmEtherMappingAmr16QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (16QAM). This object configures the E1 channel count which is mapped to the radio link running on 16QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 21 } esTdmEtherMappingAmr32QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (32QAM). This object configures the E1 channel count which is mapped to the radio link running on 32QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 22 } esTdmEtherMappingAmr64QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (64QAM). This object configures the E1 channel count which is mapped to the radio link running on 64QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 23 } esTdmEtherMappingAmr128QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (128QAM). This object configures the E1 channel count which is mapped to the radio link running on 128QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 24 } esTdmEtherMappingAmr256QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (256QAM). This object configures the E1 channel count which is mapped to the radio link running on 256QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 25 } esTdmEtherMappingRst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping. This object configures the STM-1 channel count which is mapped to the radio link. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 26 } esTdmEtherMappingRstAmrQPSK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (QPSK). This object configures the STM-1 channel count which is mapped to the radio link running on QPSK on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 27 } esTdmEtherMappingRstAmr16QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (16QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 16QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 28 } esTdmEtherMappingRstAmr32QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (32QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 32QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 29 } esTdmEtherMappingRstAmr64QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (64QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 64QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 30 } esTdmEtherMappingRstAmr128QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (128QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 128QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 31 } esTdmEtherMappingRstAmr256QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (256QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 256QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 32 } esModemAmrRange512QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (512QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 33 } esModemAmrRange1024QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (1024QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 34 } esTdmEtherMappingAmr512QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (512QAM). This object configures the E1 channel count which is mapped to the radio link running on 512QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 35 } esTdmEtherMappingAmr1024QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (1024QAM). This object configures the E1 channel count which is mapped to the radio link running on 1024QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 36 } esTdmEtherMappingRstAmr512QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (512QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 512QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 37 } esTdmEtherMappingRstAmr1024QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (1024QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 1024QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 38 } esModemGroupMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), phyMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Radio Traffic Aggregation Mode. When the 'normal' mode aggregation is configured, Ethernet frames are distributed to the multiple radio links based on usual Link aggregation behaviour. when the 'phyMode' mode, Ethernet frames are distributed to the multiple radio links based on the ratio for the radio link speed. 'phyMode' must be configured to the modem cards which are belonging to the same radio traffic aggregation group. And 'phyMode' must be configured to continuous 2 slots (lower slot is odd number). If 'phyMode' is configured to the single modem or 3 or more slots, the agent will reject the request. 'phyAdvancedMode' must be configured to the modem cards which are belonging to the same radio traffic aggregation group. And 'phyAdvancedMode' must be configured to continuous 3 or more slots (lower slot is odd number). If 'phyAdvancedMode' is configured to the one or 2 modems, the agent will reject the request. 'phyAdvancedMode' is valid for iPASO VR 10 only." ::= { esModemEntry 39 } esModemAmrRange2048QAM OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Range (2048QAM). When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 40 } esTdmEtherMappingAmr2048QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Mapping (2048QAM). This object configures the E1 channel count which is mapped to the radio link running on 2048QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 41 } esTdmEtherMappingRstAmr2048QAM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mapping (2048QAM). This object configures the STM-1 channel count which is mapped to the radio link running on 2048QAM on the AMR mode. When this parameter changes, the agent will adjust the E1/RST mappings according to this parameter. And the XCs whose channel number is exceeded to the E1/RST mapping number are automatically deleted." ::= { esModemEntry 42 } esModemEthTransparentClockPath OBJECT-TYPE SYNTAX Integer32 UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the bandwidth for Transparent Clock path. The configuration step is 0 (notUsed), 2, 4, 8 Mbps." ::= { esModemEntry 43 } esModemSwGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF EsModemSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the MODEM Switch group and XPIC group." ::= { equipmentSetUpGroup 3 } esModemSwGroupEntry OBJECT-TYPE SYNTAX EsModemSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { esModemSwGroupIfIndex } ::= { esModemSwGroupTable 1 } EsModemSwGroupEntry ::= SEQUENCE { esModemSwGroupIfIndex InterfaceIndex, esModemSwGroupNEAddress IpAddress, esModemSwRowStatus INTEGER, esSWGConfiguration INTEGER } esModemSwGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { esModemSwGroupEntry 1 } esModemSwGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { esModemSwGroupEntry 2 } esModemSwRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { esModemSwGroupEntry 3 } esSWGConfiguration OBJECT-TYPE SYNTAX INTEGER { invalid(0), notUsed(1), hs1plus1(2), tp1plus1(3), xpic1plus0(4), xpic1plus1HsMaster(5), xpic1plus1HsSlave(6), xpic1plus1TpMaster(7), xpic1plus1TpSlave(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "MODEM SW/XPIC Group Configuration. Configures the type of MODEM Switch group and XPIC group. Changing the SW/XPIC Group configuration will remove the CrossConnections and VLANs which are configured to the protection port." ::= { esModemSwGroupEntry 4 } esStm1ApsTable OBJECT-TYPE SYNTAX SEQUENCE OF EsStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "STM1 APS configuration." ::= { equipmentSetUpGroup 4 } esStm1ApsEntry OBJECT-TYPE SYNTAX EsStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { esStm1ApsIfIndex } ::= { esStm1ApsTable 1 } EsStm1ApsEntry ::= SEQUENCE { esStm1ApsIfIndex InterfaceIndex, esStm1ApsNEAddress IpAddress, esApsSwRowStauts RowStatus, esApsConfiguration INTEGER } esStm1ApsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { esStm1ApsEntry 1 } esStm1ApsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { esStm1ApsEntry 2 } esApsSwRowStauts OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { esStm1ApsEntry 3 } esApsConfiguration OBJECT-TYPE SYNTAX INTEGER { invalid(0), sameCard(1), diffCard(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "STM-1 APS Group Configuration. This object indicates the STM1 APS configuration. When the row is created, either sameCard or diffCard must be specified. The value cannot be changed to other type once esStm1ApsTable is created." ::= { esStm1ApsEntry 4 } esStm1PortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF EsStm1PortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the STM-1 Channel mode." ::= { equipmentSetUpGroup 9 } esStm1PortModeEntry OBJECT-TYPE SYNTAX EsStm1PortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { esStm1PortModeIfIndex } ::= { esStm1PortModeTable 1 } EsStm1PortModeEntry ::= SEQUENCE { esStm1PortModeIfIndex InterfaceIndex, esStm1PortModeNEAddress IpAddress, esStm1PortMode INTEGER } esStm1PortModeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { esStm1PortModeEntry 1 } esStm1PortModeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { esStm1PortModeEntry 2 } esStm1PortMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), through(1), channelized(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Port Mode. Changing the port mode to other will remove the CrossConnections and Clock reference setting which are configured to that port." ::= { esStm1PortModeEntry 3 } ----------------------------------------------- -- provisioningGroup Definitions ----------------------------------------------- provAlarmGroup OBJECT IDENTIFIER ::= { provisioningGroup 1 } provAlarmCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAlarmCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the system alarm mode." ::= { provAlarmGroup 1 } provAlarmCommonEntry OBJECT-TYPE SYNTAX ProvAlarmCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAlarmCommonIndex } ::= { provAlarmCommonTable 1 } ProvAlarmCommonEntry ::= SEQUENCE { provAlarmCommonIndex INTEGER, provAlarmCommonNEAddress IpAddress, alarmCorrelation OffOnValue, alarmDelay Integer32, alarmStretch Integer32 } provAlarmCommonIndex OBJECT-TYPE SYNTAX INTEGER { alarm(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAlarmCommonEntry 1 } provAlarmCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAlarmCommonEntry 2 } alarmCorrelation OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Correlation Setting. Enables/Disables alarm correlation function." ::= { provAlarmCommonEntry 3 } alarmDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay Setting." ::= { provAlarmCommonEntry 4 } alarmStretch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Stretch Setting." ::= { provAlarmCommonEntry 5 } provAlarmEventTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAlarmEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "configures the alarm severity value." ::= { provAlarmGroup 2 } provAlarmEventEntry OBJECT-TYPE SYNTAX ProvAlarmEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alarmEventIndex, alarmEventSourceCategory, alarmEventElemId } ::= { provAlarmEventTable 1 } ProvAlarmEventEntry ::= SEQUENCE { alarmEventIndex INTEGER, alarmEventSourceCategory Integer32, alarmEventElemId Integer32, provAlarmEventNEAddress IpAddress, alarmEventSeverity INTEGER, alarmEventAlarmType AlarmTypeValue, alarmEventProbableCause ProbableCauseValue, alarmEventDelayStretchUsage UsedNotusedValue } alarmEventIndex OBJECT-TYPE SYNTAX INTEGER { alarmStateChange(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAlarmEventEntry 1 } alarmEventSourceCategory OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "index of this table. Each alarm is categorized depending on the generator of that alarm." ::= { provAlarmEventEntry 2 } alarmEventElemId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "index of this table. This object is administrative value which can distinguish the alarm among the alarmEventSourceCategory." ::= { provAlarmEventEntry 3 } provAlarmEventNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAlarmEventEntry 4 } alarmEventSeverity OBJECT-TYPE SYNTAX INTEGER { invalid(0), critical(1), major(2), minor(3), warning(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the alarm severity. Once the alarm severity is changed, the system changes the alarm severity of all raised alarms, but the corresponding notifications are suppressed. The manager must synchronize the alarm status after receiving the equipConfigStatus change notification." ::= { provAlarmEventEntry 5 } alarmEventAlarmType OBJECT-TYPE SYNTAX AlarmTypeValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configures the alarm type based on the X.733 definitions." ::= { provAlarmEventEntry 6 } alarmEventProbableCause OBJECT-TYPE SYNTAX ProbableCauseValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configures the probable cause based on the X.733 definitions." ::= { provAlarmEventEntry 7 } alarmEventDelayStretchUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Delay Stretch Usage. Configures the usage of the delay/stretch behaviour." ::= { provAlarmEventEntry 8 } provAlsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Confgiures Automatic Laser Shutdown mode." ::= { provisioningGroup 2 } provAlsEntry OBJECT-TYPE SYNTAX ProvAlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAlsIfIndex } ::= { provAlsTable 1 } ProvAlsEntry ::= SEQUENCE { provAlsIfIndex InterfaceIndex, provAlsNEAddress IpAddress, alsUsage EnableDisableValue, alsInterval INTEGER } provAlsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAlsEntry 1 } provAlsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAlsEntry 2 } alsUsage OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "ALS Usage. Enables/Disables ALS function of the STM-1 port." ::= { provAlsEntry 3 } alsInterval OBJECT-TYPE SYNTAX INTEGER { invalid(0), sec60(1), sec180(2), sec300(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "ALS Interval." ::= { provAlsEntry 4 } provE1Group OBJECT IDENTIFIER ::= { provisioningGroup 3 } provE1ChSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvE1ChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure E1 Channel Parameters." ::= { provE1Group 1 } provE1ChSetEntry OBJECT-TYPE SYNTAX ProvE1ChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provE1ChSetIfIndex } ::= { provE1ChSetTable 1 } ProvE1ChSetEntry ::= SEQUENCE { provE1ChSetIfIndex InterfaceIndex, provE1ChSetNEAddress IpAddress, e1PortName DisplayString, chUsage UsedNotusedValue, chUsageErrorReport ReportNotreportValue, impedanceSetting INTEGER } provE1ChSetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provE1ChSetEntry 1 } provE1ChSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provE1ChSetEntry 2 } e1PortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Name." ::= { provE1ChSetEntry 3 } chUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "CH Usage." ::= { provE1ChSetEntry 4 } chUsageErrorReport OBJECT-TYPE SYNTAX ReportNotreportValue MAX-ACCESS read-write STATUS current DESCRIPTION "CH Usage Error Report." ::= { provE1ChSetEntry 5 } impedanceSetting OBJECT-TYPE SYNTAX INTEGER { invalid(0), ohm120(1), ohm75(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impedance." ::= { provE1ChSetEntry 6 } provE1AisCondTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvE1AisCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures E1 AIS Usage." ::= { provE1Group 2 } provE1AisCondEntry OBJECT-TYPE SYNTAX ProvE1AisCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provE1AisCondIndex } ::= { provE1AisCondTable 1 } ProvE1AisCondEntry ::= SEQUENCE { provE1AisCondIndex Integer32, provE1AisCondNEAddress IpAddress, e1AisActivationCond EnableDisableValue } provE1AisCondIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provE1AisCondEntry 1 } provE1AisCondNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provE1AisCondEntry 2 } e1AisActivationCond OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables E1 AIS Report." ::= { provE1AisCondEntry 3 } provE1CardSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvE1CardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures E1 Card Parameters." ::= { provE1Group 3 } provE1CardSetEntry OBJECT-TYPE SYNTAX ProvE1CardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provE1CardSetIndex } ::= { provE1CardSetTable 1 } ProvE1CardSetEntry ::= SEQUENCE { provE1CardSetIndex Integer32, provE1CardSetNEAddress IpAddress, e1CardLineClkSelect Integer32 } provE1CardSetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provE1CardSetEntry 1 } provE1CardSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provE1CardSetEntry 2 } e1CardLineClkSelect OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the timing source from 16 E1 channels." ::= { provE1CardSetEntry 3 } provAisGroup OBJECT IDENTIFIER ::= { provisioningGroup 4 } provAisGenerationTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAisGenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures AIS Generation Mode of STM-1 Port." ::= { provAisGroup 1 } provAisGenerationEntry OBJECT-TYPE SYNTAX ProvAisGenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAisGenerationIfIndex } ::= { provAisGenerationTable 1 } ProvAisGenerationEntry ::= SEQUENCE { provAisGenerationIfIndex InterfaceIndex, provAisGenerationNEAddress IpAddress, msAisGeneration INTEGER } provAisGenerationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAisGenerationEntry 1 } provAisGenerationNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAisGenerationEntry 2 } msAisGeneration OBJECT-TYPE SYNTAX INTEGER { invalid(0), shutdown(1), output(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "MS-AIS Generation. This object configures the behaviour of STM-1 Port on receiving AIS from Radio link." ::= { provAisGenerationEntry 3 } provAisSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAisSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures AIS Generate condition." ::= { provAisGroup 2 } provAisSettingEntry OBJECT-TYPE SYNTAX ProvAisSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAisSettingIndex } ::= { provAisSettingTable 1 } ProvAisSettingEntry ::= SEQUENCE { provAisSettingIndex Integer32, provAisSettingNEAddress IpAddress, aisActivationDelay OffOnValue, aisActivationCond INTEGER, aisGeneratedReport ReportNotreportValue, aisReceivedReport ReportNotreportValue, aisReceivedCondSet INTEGER } provAisSettingIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAisSettingEntry 1 } provAisSettingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAisSettingEntry 2 } aisActivationDelay OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Activation Delay." ::= { provAisSettingEntry 3 } aisActivationCond OBJECT-TYPE SYNTAX INTEGER { invalid(0), lofHighber(1), lof(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Activation Condition." ::= { provAisSettingEntry 4 } aisGeneratedReport OBJECT-TYPE SYNTAX ReportNotreportValue MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Generated Report (E1/STM-1). This object enables the notification on generating the AIS on the E1 channel/STM-1 port." ::= { provAisSettingEntry 5 } aisReceivedReport OBJECT-TYPE SYNTAX ReportNotreportValue MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Received Report (E1). This object enables the notification on receiving the AIS on the E1 channel." ::= { provAisSettingEntry 6 } aisReceivedCondSet OBJECT-TYPE SYNTAX INTEGER { invalid(0), alarm(1), status(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Received Condition (E1). When the object is set to 'alarm', the AIS receive event will be reported as alarm event." ::= { provAisSettingEntry 7 } provRadioSettingGroup OBJECT IDENTIFIER ::= { provisioningGroup 5 } provModemSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvModemSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures MODEM Port parameters." ::= { provRadioSettingGroup 1 } provModemSettingEntry OBJECT-TYPE SYNTAX ProvModemSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provModemSettingIfIndex } ::= { provModemSettingTable 1 } ProvModemSettingEntry ::= SEQUENCE { provModemSettingIfIndex InterfaceIndex, provModemSettingNEAddress IpAddress, modemPortName DisplayString, headerCompress EnableDisableValue } provModemSettingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provModemSettingEntry 1 } provModemSettingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provModemSettingEntry 2 } modemPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Name." ::= { provModemSettingEntry 3 } headerCompress OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables Header compression." ::= { provModemSettingEntry 4 } provSWCondTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSWCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures Tx/Rx Sw Conditions." ::= { provRadioSettingGroup 2 } provSWCondEntry OBJECT-TYPE SYNTAX ProvSWCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSWCondIfIndex } ::= { provSWCondTable 1 } ProvSWCondEntry ::= SEQUENCE { provSWCondIfIndex InterfaceIndex, provSWCondNEAddress IpAddress, txSwPriority INTEGER, rxSwPriority INTEGER, txSwLockinUsage UsedNotusedValue, txSwDetectionTime Integer32, txSwDetectionCounter Integer32, txSwClearLockinTime Integer32, reverseFunctionUsage UsedNotusedValue, rxSwEwCondition INTEGER } provSWCondIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSWCondEntry 1 } provSWCondNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSWCondEntry 2 } txSwPriority OBJECT-TYPE SYNTAX INTEGER { invalid(0), no1(1), nonPriority(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Priority." ::= { provSWCondEntry 3 } rxSwPriority OBJECT-TYPE SYNTAX INTEGER { invalid(0), no1(1), nonPriority(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Rx SW Priority." ::= { provSWCondEntry 4 } txSwLockinUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Lock-in Usage." ::= { provSWCondEntry 5 } txSwDetectionTime OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Detection Time." ::= { provSWCondEntry 6 } txSwDetectionCounter OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Detection Counter." ::= { provSWCondEntry 7 } txSwClearLockinTime OBJECT-TYPE SYNTAX Integer32 (1..48) MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Clear Lock-in Time." ::= { provSWCondEntry 8 } reverseFunctionUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Tx SW Reverse Function Usage." ::= { provSWCondEntry 9 } rxSwEwCondition OBJECT-TYPE SYNTAX INTEGER { invalid(0), include(1), exclude(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Rx SW Condition Early Warning. This object determines the Early Warning is included as Rx Sw trigger or not." ::= { provSWCondEntry 10 } provAmrSWCondTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAmrSWCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure AMR modulation switch condition." ::= { provRadioSettingGroup 4 } provAmrSWCondEntry OBJECT-TYPE SYNTAX ProvAmrSWCondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAmrSWCondIfIndex } ::= { provAmrSWCondTable 1 } ProvAmrSWCondEntry ::= SEQUENCE { provAmrSWCondIfIndex InterfaceIndex, provAmrSWCondNEAddress IpAddress, amrSwitchCondition INTEGER, amrSwitchTransition INTEGER } provAmrSWCondIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAmrSWCondEntry 1 } provAmrSWCondNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAmrSWCondEntry 2 } amrSwitchCondition OBJECT-TYPE SYNTAX INTEGER { invalid(0), cnrRsl(1), cnr(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Switch Condition. This object determines the AMR modulation switch condition includes Receive Signal Level or not." ::= { provAmrSWCondEntry 3 } amrSwitchTransition OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), sensitive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Switch Transition." ::= { provAmrSWCondEntry 4 } provModemHeaderCompressTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvModemHeaderCompressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table configures Header Compression Function. This table is created automatically when the Modem Card is provisioned, if the F/W supports the new Header Compression function." ::= { provRadioSettingGroup 5 } provModemHeaderCompressEntry OBJECT-TYPE SYNTAX ProvModemHeaderCompressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provModemHeaderCompressIfIndex } ::= { provModemHeaderCompressTable 1 } ProvModemHeaderCompressEntry ::= SEQUENCE { provModemHeaderCompressIfIndex InterfaceIndex, provModemHeaderCompressNEAddress IpAddress, provModemHeaderCompressMode INTEGER } provModemHeaderCompressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provModemHeaderCompressEntry 1 } provModemHeaderCompressNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provModemHeaderCompressEntry 2 } provModemHeaderCompressMode OBJECT-TYPE SYNTAX INTEGER { disable(1), mac(2), macWithIpv4(3), macWithIpv6(4), macWithMpls(5), enhancedMacWithIpv4(6), enhancedMacWithIpv6(7), enhancedMacWithMpls(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Modem Header/Payload* Compression. The previous header compress object 'headerCompress' acts as read-only object, when this object is supported. And this object is set to other than 'mac', the value of 'headerCompress' will be changed to 'disable'. (*iPASOLINK VR series only)" DEFVAL { disable } ::= { provModemHeaderCompressEntry 3 } provTxPowerContTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTxPowerContEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the Tx Power Control." ::= { provisioningGroup 6 } provTxPowerContEntry OBJECT-TYPE SYNTAX ProvTxPowerContEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTxPowerContIfIndex } ::= { provTxPowerContTable 1 } ProvTxPowerContEntry ::= SEQUENCE { provTxPowerContIfIndex InterfaceIndex, provTxPowerContNEAddress IpAddress, atpcRangeMax Integer32, atpcRangeMin Integer32, atpcHysteresis Integer32, mtpcTxPower Integer32, rxThresholdLevel Integer32 } provTxPowerContIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTxPowerContEntry 1 } provTxPowerContNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTxPowerContEntry 2 } atpcRangeMax OBJECT-TYPE SYNTAX Integer32 (-380..400) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum range of ATPC Power." ::= { provTxPowerContEntry 3 } atpcRangeMin OBJECT-TYPE SYNTAX Integer32 (-380..400) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum range of ATPC Power." ::= { provTxPowerContEntry 4 } atpcHysteresis OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Hysterisis of the ATPC." ::= { provTxPowerContEntry 5 } mtpcTxPower OBJECT-TYPE SYNTAX Integer32 (-380..400) MAX-ACCESS read-write STATUS current DESCRIPTION "Power Setting of MTPC Mode." ::= { provTxPowerContEntry 6 } rxThresholdLevel OBJECT-TYPE SYNTAX Integer32 (-90..-30) MAX-ACCESS read-write STATUS current DESCRIPTION "The RX Threshold Level of ATPC Mode." ::= { provTxPowerContEntry 7 } provAlmModeTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAlmModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provisioningGroup 7 } provAlmModeEntry OBJECT-TYPE SYNTAX ProvAlmModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAlmModeIfIndex } ::= { provAlmModeTable 1 } ProvAlmModeEntry ::= SEQUENCE { provAlmModeIfIndex InterfaceIndex, provAlmModeNEAddress IpAddress, atpcPowerModeSet INTEGER, oduCommAlmModeSet INTEGER } provAlmModeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAlmModeEntry 1 } provAlmModeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAlmModeEntry 2 } atpcPowerModeSet OBJECT-TYPE SYNTAX INTEGER { invalid(0), max(1), min(2), hold(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "ATPC Power Mode." ::= { provAlmModeEntry 3 } oduCommAlmModeSet OBJECT-TYPE SYNTAX INTEGER { invalid(0), mute(1), hold(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ODU Communication Alarm Mode." ::= { provAlmModeEntry 4 } provBERThresholdGroup OBJECT IDENTIFIER ::= { provisioningGroup 8 } provRadioBERThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvRadioBERThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provBERThresholdGroup 1 } provRadioBERThresholdEntry OBJECT-TYPE SYNTAX ProvRadioBERThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provRadioBERThresholdIfIndex } ::= { provRadioBERThresholdTable 1 } ProvRadioBERThresholdEntry ::= SEQUENCE { provRadioBERThresholdIfIndex InterfaceIndex, provRadioBERThresholdNEAddress IpAddress, highBER INTEGER, lowBER INTEGER } provRadioBERThresholdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provRadioBERThresholdEntry 1 } provRadioBERThresholdNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provRadioBERThresholdEntry 2 } highBER OBJECT-TYPE SYNTAX INTEGER { invalid(0), ber1e2(1), ber1e3(2), ber1e4(3), ber1e5(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold configuration of High BER alarm." ::= { provRadioBERThresholdEntry 3 } lowBER OBJECT-TYPE SYNTAX INTEGER { invalid(0), ber1e6(1), ber1e7(2), ber1e8(3), ber1e9(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold configuration of Low BER alarm." ::= { provRadioBERThresholdEntry 4 } provStm1BERThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStm1BERThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provBERThresholdGroup 2 } provStm1BERThresholdEntry OBJECT-TYPE SYNTAX ProvStm1BERThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provStm1BERThresholdIfIndex } ::= { provStm1BERThresholdTable 1 } ProvStm1BERThresholdEntry ::= SEQUENCE { provStm1BERThresholdIfIndex InterfaceIndex, provStm1BERThresholdNEAddress IpAddress, eBER INTEGER, sd INTEGER } provStm1BERThresholdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provStm1BERThresholdEntry 1 } provStm1BERThresholdNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provStm1BERThresholdEntry 2 } eBER OBJECT-TYPE SYNTAX INTEGER { invalid(0), ber1e3(1), ber1e4(2), ber1e5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold configuration of eBER alarm." ::= { provStm1BERThresholdEntry 3 } sd OBJECT-TYPE SYNTAX INTEGER { invalid(0), ber1e5(1), ber1e6(2), ber1e7(3), ber1e8(4), ber1e9(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold configuration of Signal Degrade." ::= { provStm1BERThresholdEntry 4 } provPMONSelectTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvPMONSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provisioningGroup 9 } provPMONSelectEntry OBJECT-TYPE SYNTAX ProvPMONSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provPMONSelectIfIndex } ::= { provPMONSelectTable 1 } ProvPMONSelectEntry ::= SEQUENCE { provPMONSelectIfIndex Integer32, provPMONSelectNEAddress IpAddress, pmonRxLevelTCNThreshold Integer32 } provPMONSelectIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provPMONSelectEntry 1 } provPMONSelectNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provPMONSelectEntry 2 } pmonRxLevelTCNThreshold OBJECT-TYPE SYNTAX Integer32 (-99..-30) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum threshold of Rx Level Alarm." ::= { provPMONSelectEntry 3 } provTCNThresholdGroup OBJECT IDENTIFIER ::= { provisioningGroup 10 } provTCNThreshold15minRadioGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 1 } provTCNThreshold15minRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains threshold configuration for monitoring of Radio Link. For high capacity radio equipment, if provTCNThreshold15minRadio2Table is instantiated, this table acts as read-only and this table returns same value of provTCNThreshold15minRadio2Table." ::= { provTCNThreshold15minRadioGroup 1 } provTCNThreshold15minRadioEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minModemIfIndex, provTCNThreshold15minModemMonitorName } ::= { provTCNThreshold15minRadioTable 1 } ProvTCNThreshold15minRadioEntry ::= SEQUENCE { provTCNThreshold15minModemIfIndex InterfaceIndex, provTCNThreshold15minModemMonitorName INTEGER, provTCNThreshold15minRadioNEAddress IpAddress, provTCNThreshold15minRfOccurValue Integer32, provTCNThreshold15minRfRecoverValue Integer32 } provTCNThreshold15minModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minRadioEntry 1 } provTCNThreshold15minModemMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. This object represents the monitoring item." ::= { provTCNThreshold15minRadioEntry 2 } provTCNThreshold15minRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minRadioEntry 3 } provTCNThreshold15minRfOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection per 15 minutes monitoring item of the Radio Link." ::= { provTCNThreshold15minRadioEntry 4 } provTCNThreshold15minRfRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing per 15minites monitoring item of the Radio Link." ::= { provTCNThreshold15minRadioEntry 5 } provTCNThreshold15minCableGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 2 } provTCNThreshold15minThroughModeGroup OBJECT IDENTIFIER ::= { provTCNThreshold15minCableGroup 1 } provTCNThreshold15minTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold15minThroughModeGroup 1 } provTCNThreshold15minTmRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minTmRsIfIndex, provTCNThreshold15minTmRsMonitorName } ::= { provTCNThreshold15minTmRsTable 1 } ProvTCNThreshold15minTmRsEntry ::= SEQUENCE { provTCNThreshold15minTmRsIfIndex InterfaceIndex, provTCNThreshold15minTmRsMonitorName INTEGER, provTCNThreshold15minTmRsNEAddress IpAddress, provTCNThreshold15minTmRsOccurValue Integer32, provTCNThreshold15minTmRsRecoverValue Integer32 } provTCNThreshold15minTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minTmRsEntry 1 } provTCNThreshold15minTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the montioring item." ::= { provTCNThreshold15minTmRsEntry 2 } provTCNThreshold15minTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minTmRsEntry 3 } provTCNThreshold15minTmRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection per 15 minutes monitoring item of the Throughmode STM-1 RS layer." ::= { provTCNThreshold15minTmRsEntry 4 } provTCNThreshold15minTmRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the threshold of alarm clearing per 15 minutes monitoring item of the throughmode STM-1 RS layer." ::= { provTCNThreshold15minTmRsEntry 5 } provTCNThreshold15minTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold15minThroughModeGroup 2 } provTCNThreshold15minTmDMRRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minTmDMRRsIfIndex, provTCNThreshold15minTmDMRRsMonitorName } ::= { provTCNThreshold15minTmDMRRsTable 1 } ProvTCNThreshold15minTmDMRRsEntry ::= SEQUENCE { provTCNThreshold15minTmDMRRsIfIndex InterfaceIndex, provTCNThreshold15minTmDMRRsMonitorName INTEGER, provTCNThreshold15minTmDMRRsNEAddress IpAddress, provTCNThreshold15minTmDMRRsOccurValue Integer32, provTCNThreshold15minTmDMRRsRecoverValue Integer32 } provTCNThreshold15minTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minTmDMRRsEntry 1 } provTCNThreshold15minTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table. The object represents the monintoring item." ::= { provTCNThreshold15minTmDMRRsEntry 2 } provTCNThreshold15minTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minTmDMRRsEntry 3 } provTCNThreshold15minTmDMRRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection per 15 minute montioring item of DMR Mode STM-1 RS layer." ::= { provTCNThreshold15minTmDMRRsEntry 4 } provTCNThreshold15minTmDMRRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing per 15 minute monitoring item of DMR Mode STM-1 Rs layer." ::= { provTCNThreshold15minTmDMRRsEntry 5 } provTCNThreshold15minChannelizedModeGroup OBJECT IDENTIFIER ::= { provTCNThreshold15minCableGroup 2 } provTCNThreshold15minChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold15minChannelizedModeGroup 1 } provTCNThreshold15minChRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minChRsIfIndex, provTCNThreshold15minChRsMonitorName } ::= { provTCNThreshold15minChRsTable 1 } ProvTCNThreshold15minChRsEntry ::= SEQUENCE { provTCNThreshold15minChRsIfIndex InterfaceIndex, provTCNThreshold15minChRsMonitorName INTEGER, provTCNThreshold15minChRsNEAddress IpAddress, provTCNThreshold15minChRsOccurValue Integer32, provTCNThreshold15minChRsRecoverValue Integer32 } provTCNThreshold15minChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minChRsEntry 1 } provTCNThreshold15minChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold15minChRsEntry 2 } provTCNThreshold15minChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minChRsEntry 3 } provTCNThreshold15minChRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection of 15 minute monitoring of Channerized mode of STM-1 RS layer." ::= { provTCNThreshold15minChRsEntry 4 } provTCNThreshold15minChRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing of 15 minute monitoring of Channerized mode of STM-1 RS layer." ::= { provTCNThreshold15minChRsEntry 5 } provTCNThreshold15minChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold15minChannelizedModeGroup 2 } provTCNThreshold15minChMsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minChMsIfIndex, provTCNThreshold15minChMsMonitorName } ::= { provTCNThreshold15minChMsTable 1 } ProvTCNThreshold15minChMsEntry ::= SEQUENCE { provTCNThreshold15minChMsIfIndex InterfaceIndex, provTCNThreshold15minChMsMonitorName INTEGER, provTCNThreshold15minChMsNEAddress IpAddress, provTCNThreshold15minChMsOccurValue Integer32, provTCNThreshold15minChMsRecoverValue Integer32 } provTCNThreshold15minChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minChMsEntry 1 } provTCNThreshold15minChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table. The object represents the monitoring item." ::= { provTCNThreshold15minChMsEntry 2 } provTCNThreshold15minChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minChMsEntry 3 } provTCNThreshold15minChMsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection of 15 minutes monitoring of Channelized STM-1 MS layer." ::= { provTCNThreshold15minChMsEntry 4 } provTCNThreshold15minChMsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing of 15 minutes monitoring of Channelized STM-1 MS layer." ::= { provTCNThreshold15minChMsEntry 5 } provTCNThreshold15min16E1Group OBJECT IDENTIFIER ::= { provTCNThreshold15minCableGroup 3 } provTCNThreshold15min16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15min16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold15min16E1Group 1 } provTCNThreshold15min16E1PdhEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15min16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15min16E1PdhIfIndex, provTCNThreshold15min16E1PdhMonitorName } ::= { provTCNThreshold15min16E1PdhTable 1 } ProvTCNThreshold15min16E1PdhEntry ::= SEQUENCE { provTCNThreshold15min16E1PdhIfIndex InterfaceIndex, provTCNThreshold15min16E1PdhMonitorName INTEGER, provTCNThreshold15min16E1PdhNEAddress IpAddress, provTCNThreshold15min16E1PdhOccurValue Unsigned32, provTCNThreshold15min16E1PdhRecoverValue Unsigned32 } provTCNThreshold15min16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15min16E1PdhEntry 1 } provTCNThreshold15min16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { cv(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold15min16E1PdhEntry 2 } provTCNThreshold15min16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15min16E1PdhEntry 3 } provTCNThreshold15min16E1PdhOccurValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of the alarm detection of 15 minutes monitoring of 16E1." ::= { provTCNThreshold15min16E1PdhEntry 4 } provTCNThreshold15min16E1PdhRecoverValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of the alarm clearing of 15 minutes monitoring of 16E1." ::= { provTCNThreshold15min16E1PdhEntry 5 } provTCNThreshold1dayRadioGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 3 } provTCNThreshold1dayRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains threshold configuration for monitoring of Radio Link. For high capacity radio equipment, if provTCNThreshold1dayRadio2Table is instantiated, this table acts as read-only and this table returns same value of provTCNThreshold1dayRadio2Table." ::= { provTCNThreshold1dayRadioGroup 1 } provTCNThreshold1dayRadioEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1dayModemIfIndex, provTCNThreshold1dayModemMonitorName } ::= { provTCNThreshold1dayRadioTable 1 } ProvTCNThreshold1dayRadioEntry ::= SEQUENCE { provTCNThreshold1dayModemIfIndex InterfaceIndex, provTCNThreshold1dayModemMonitorName INTEGER, provTCNThreshold1dayRadioNEAddress IpAddress, provTCNThreshold1dayRfOccurValue Integer32, provTCNThreshold1dayRfRecoverValue Integer32 } provTCNThreshold1dayModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayRadioEntry 1 } provTCNThreshold1dayModemMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold1dayRadioEntry 2 } provTCNThreshold1dayRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1dayRadioEntry 3 } provTCNThreshold1dayRfOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection of 1 day montioring of Radio Link." ::= { provTCNThreshold1dayRadioEntry 4 } provTCNThreshold1dayRfRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing of 1 day monitoring of Radio Link." ::= { provTCNThreshold1dayRadioEntry 5 } provTCNThreshold1dayCableGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 4 } provTCNThreshold1dayThroughModeGroup OBJECT IDENTIFIER ::= { provTCNThreshold1dayCableGroup 1 } provTCNThreshold1dayTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold1dayThroughModeGroup 1 } provTCNThreshold1dayTmRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1dayTmRsIfIndex, provTCNThreshold1dayTmRsMonitorName } ::= { provTCNThreshold1dayTmRsTable 1 } ProvTCNThreshold1dayTmRsEntry ::= SEQUENCE { provTCNThreshold1dayTmRsIfIndex InterfaceIndex, provTCNThreshold1dayTmRsMonitorName INTEGER, provTCNThreshold1dayTmRsNEAddress IpAddress, provTCNThreshold1dayTmRsOccurValue Integer32, provTCNThreshold1dayTmRsRecoverValue Integer32 } provTCNThreshold1dayTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayTmRsEntry 1 } provTCNThreshold1dayTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object of the monitoring item." ::= { provTCNThreshold1dayTmRsEntry 2 } provTCNThreshold1dayTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1dayTmRsEntry 3 } provTCNThreshold1dayTmRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection of 1 day monitoring of Throughmode of STM-1 RS layer." ::= { provTCNThreshold1dayTmRsEntry 4 } provTCNThreshold1dayTmRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing of 1 day monitoring of Throughmode of STM-1 RS layer." ::= { provTCNThreshold1dayTmRsEntry 5 } provTCNThreshold1dayTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold1dayThroughModeGroup 2 } provTCNThreshold1dayTmDMRRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1dayTmDMRRsIfIndex, provTCNThreshold1dayTmDMRRsMonitorName } ::= { provTCNThreshold1dayTmDMRRsTable 1 } ProvTCNThreshold1dayTmDMRRsEntry ::= SEQUENCE { provTCNThreshold1dayTmDMRRsIfIndex InterfaceIndex, provTCNThreshold1dayTmDMRRsMonitorName INTEGER, provTCNThreshold1dayTmDMRRsNEAddress IpAddress, provTCNThreshold1dayTmDMRRsOccurValue Integer32, provTCNThreshold1dayTmDMRRsRecoverValue Integer32 } provTCNThreshold1dayTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayTmDMRRsEntry 1 } provTCNThreshold1dayTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. This object represents the monitoring item." ::= { provTCNThreshold1dayTmDMRRsEntry 2 } provTCNThreshold1dayTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1dayTmDMRRsEntry 3 } provTCNThreshold1dayTmDMRRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection of 1 day monitoring of DMR Mode STM-1 RS Layer." ::= { provTCNThreshold1dayTmDMRRsEntry 4 } provTCNThreshold1dayTmDMRRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing of 1 day monitoring of DMR Mode STM-1 RS Layer." ::= { provTCNThreshold1dayTmDMRRsEntry 5 } provTCNThreshold1dayChannelizedModeGroup OBJECT IDENTIFIER ::= { provTCNThreshold1dayCableGroup 2 } provTCNThreshold1dayChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold1dayChannelizedModeGroup 1 } provTCNThreshold1dayChRsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1dayChRsIfIndex, provTCNThreshold1dayChRsMonitorName } ::= { provTCNThreshold1dayChRsTable 1 } ProvTCNThreshold1dayChRsEntry ::= SEQUENCE { provTCNThreshold1dayChRsIfIndex InterfaceIndex, provTCNThreshold1dayChRsMonitorName INTEGER, provTCNThreshold1dayChRsNEAddress IpAddress, provTCNThreshold1dayChRsOccurValue Integer32, provTCNThreshold1dayChRsRecoverValue Integer32 } provTCNThreshold1dayChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayChRsEntry 1 } provTCNThreshold1dayChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5), ofs(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold1dayChRsEntry 2 } provTCNThreshold1dayChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1dayChRsEntry 3 } provTCNThreshold1dayChRsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection per 1 day monitoring item of Channelized mode of STM-1 RS layer." ::= { provTCNThreshold1dayChRsEntry 4 } provTCNThreshold1dayChRsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the threshold of alarm clearing per 1 day monitoring item of Channelized mode of STM-1 RS layer." ::= { provTCNThreshold1dayChRsEntry 5 } provTCNThreshold1dayChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold1dayChannelizedModeGroup 2 } provTCNThreshold1dayChMsEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1dayChMsIfIndex, provTCNThreshold1dayChMsMonitorName } ::= { provTCNThreshold1dayChMsTable 1 } ProvTCNThreshold1dayChMsEntry ::= SEQUENCE { provTCNThreshold1dayChMsIfIndex InterfaceIndex, provTCNThreshold1dayChMsMonitorName INTEGER, provTCNThreshold1dayChMsNEAddress IpAddress, provTCNThreshold1dayChMsOccurValue Integer32, provTCNThreshold1dayChMsRecoverValue Integer32 } provTCNThreshold1dayChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayChMsEntry 1 } provTCNThreshold1dayChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { bbe(1), es(2), ses(3), sep(4), uas(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold1dayChMsEntry 2 } provTCNThreshold1dayChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1dayChMsEntry 3 } provTCNThreshold1dayChMsOccurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the threshold of alarm detection per 1 day monitoring of Channelized mode STM-1 MS layer." ::= { provTCNThreshold1dayChMsEntry 4 } provTCNThreshold1dayChMsRecoverValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the threshold of alarm clearing per 1 day monitoring of Channelized mode STM-1 MS layer." ::= { provTCNThreshold1dayChMsEntry 5 } provTCNThreshold1day16E1Group OBJECT IDENTIFIER ::= { provTCNThreshold1dayCableGroup 3 } provTCNThreshold1day16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1day16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTCNThreshold1day16E1Group 1 } provTCNThreshold1day16E1PdhEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1day16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold1day16E1PdhIfIndex, provTCNThreshold1day16E1PdhMonitorName } ::= { provTCNThreshold1day16E1PdhTable 1 } ProvTCNThreshold1day16E1PdhEntry ::= SEQUENCE { provTCNThreshold1day16E1PdhIfIndex InterfaceIndex, provTCNThreshold1day16E1PdhMonitorName INTEGER, provTCNThreshold1day16E1PdhNEAddress IpAddress, provTCNThreshold1day16E1PdhOccurValue Unsigned32, provTCNThreshold1day16E1PdhRecoverValue Unsigned32 } provTCNThreshold1day16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1day16E1PdhEntry 1 } provTCNThreshold1day16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { cv(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The object represents the monitoring item." ::= { provTCNThreshold1day16E1PdhEntry 2 } provTCNThreshold1day16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold1day16E1PdhEntry 3 } provTCNThreshold1day16E1PdhOccurValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm detection per the 1 day monitoring of 16E1." ::= { provTCNThreshold1day16E1PdhEntry 4 } provTCNThreshold1day16E1PdhRecoverValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of alarm clearing per the 1 day monitoring of 16E1." ::= { provTCNThreshold1day16E1PdhEntry 5 } provTCNThreshold15minRmonGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 5 } provTCNThreshold15minRmonTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold15minRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Threshold configuration of 15 min RMON items." ::= { provTCNThreshold15minRmonGroup 1 } provTCNThreshold15minRmonEntry OBJECT-TYPE SYNTAX ProvTCNThreshold15minRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTCNThreshold15minRmonIndex } ::= { provTCNThreshold15minRmonTable 1 } ProvTCNThreshold15minRmonEntry ::= SEQUENCE { provTCNThreshold15minRmonIndex Integer32, provTCNThreshold15minRmonNEAddress IpAddress, provTCNThreshold15minHCRxEthStatsDropEvents Unsigned32, provTCNThreshold15minHCRxEthStatsUndersizePkts Unsigned32, provTCNThreshold15minHCRxEthStatsFragments Unsigned32, provTCNThreshold15minHCRxEthStatsCRCAlignErrors Unsigned32, provTCNThreshold15minHCRxEthStatsOversizePkts Unsigned32, provTCNThreshold15minHCTxEthStatsCollisions Unsigned32 } provTCNThreshold15minRmonIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold15minRmonEntry 1 } provTCNThreshold15minRmonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTCNThreshold15minRmonEntry 2 } provTCNThreshold15minHCRxEthStatsDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN DropEvent Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 3 } provTCNThreshold15minHCRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN UndersizePkts Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 4 } provTCNThreshold15minHCRxEthStatsFragments OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN Fragments Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 5 } provTCNThreshold15minHCRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN CRCAlignErrors Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 6 } provTCNThreshold15minHCRxEthStatsOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN OversizePkts Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 7 } provTCNThreshold15minHCTxEthStatsCollisions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN Collisions Threshold - 15min value range :0-133929000 Default :133929000" ::= { provTCNThreshold15minRmonEntry 8 } provTCNThreshold1dayRmonGroup OBJECT IDENTIFIER ::= { provTCNThresholdGroup 6 } provTCNThreshold1dayRmonTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvTCNThreshold1dayRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TCN Threshold 1day" ::= { provTCNThreshold1dayRmonGroup 1 } provTCNThreshold1dayRmonEntry OBJECT-TYPE SYNTAX ProvTCNThreshold1dayRmonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TCN Threshold 1day" INDEX { provTCNThreshold1dayRmonIndex } ::= { provTCNThreshold1dayRmonTable 1 } ProvTCNThreshold1dayRmonEntry ::= SEQUENCE { provTCNThreshold1dayRmonIndex Integer32, provTCNThreshold1dayRmonNEAddress IpAddress, provTCNThreshold1dayHCRxEthStatsDropEvents Unsigned32, provTCNThreshold1dayHCRxEthStatsUndersizePkts Unsigned32, provTCNThreshold1dayHCRxEthStatsFragments Unsigned32, provTCNThreshold1dayHCRxEthStatsCRCAlignErrors Unsigned32, provTCNThreshold1dayHCRxEthStatsOversizePkts Unsigned32, provTCNThreshold1dayHCTxEthStatsCollisions Unsigned32 } provTCNThreshold1dayRmonIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTCNThreshold1dayRmonEntry 1 } provTCNThreshold1dayRmonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provTCNThreshold1dayRmonEntry 2 } provTCNThreshold1dayHCRxEthStatsDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN DropEvent Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 3 } provTCNThreshold1dayHCRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN UndersizePkts Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 4 } provTCNThreshold1dayHCRxEthStatsFragments OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN Fragments Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 5 } provTCNThreshold1dayHCRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN CRCAlignErrors Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 6 } provTCNThreshold1dayHCRxEthStatsOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN OversizePkts Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 7 } provTCNThreshold1dayHCTxEthStatsCollisions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "TCN Collisions Threshold - 1day value range :0-4294967294 Default :4294967294" ::= { provTCNThreshold1dayRmonEntry 8 } provDXCGroup OBJECT IDENTIFIER ::= { provisioningGroup 11 } provDXCTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvDXCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provDXCGroup 1 } provDXCEntry OBJECT-TYPE SYNTAX ProvDXCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provDXCIndex } ::= { provDXCTable 1 } ProvDXCEntry ::= SEQUENCE { provDXCIndex Integer32, provDXCNEAddress IpAddress, dxcRowStatus INTEGER, serviceName DisplayString, aTermProtection INTEGER, aTerm1 InterfaceIndexOrZero, aTerm2 InterfaceIndexOrZero, bTermProtection INTEGER, bTerm1 InterfaceIndexOrZero, bTerm2 InterfaceIndexOrZero, dxcMode INTEGER } provDXCIndex OBJECT-TYPE SYNTAX Integer32 (1..2352) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provDXCEntry 1 } provDXCNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provDXCEntry 2 } dxcRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { provDXCEntry 3 } serviceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Service Name" ::= { provDXCEntry 4 } aTermProtection OBJECT-TYPE SYNTAX INTEGER { nonProtection(1), protection(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.A Protection" ::= { provDXCEntry 5 } aTerm1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.A Term1" ::= { provDXCEntry 6 } aTerm2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.A Term2" ::= { provDXCEntry 7 } bTermProtection OBJECT-TYPE SYNTAX INTEGER { nonProtection(1), protection(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.B Protection" ::= { provDXCEntry 8 } bTerm1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.B Term1" ::= { provDXCEntry 9 } bTerm2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Edge.B Term2" ::= { provDXCEntry 10 } dxcMode OBJECT-TYPE SYNTAX INTEGER { e1(1), rst(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cross Connect Type" ::= { provDXCEntry 11 } provE1SncpTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvE1SncpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provDXCGroup 2 } provE1SncpEntry OBJECT-TYPE SYNTAX ProvE1SncpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provE1SncpIndex } ::= { provE1SncpTable 1 } ProvE1SncpEntry ::= SEQUENCE { provE1SncpIndex Integer32, provE1SncpNEAddress IpAddress, holdOff UsedNotusedValue } provE1SncpIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provE1SncpEntry 1 } provE1SncpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provE1SncpEntry 2 } holdOff OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Hold Off Timer" ::= { provE1SncpEntry 3 } provDXCNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvDXCNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provDXCGroup 5 } provDXCNumberEntry OBJECT-TYPE SYNTAX ProvDXCNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provDXCNumberIndex } ::= { provDXCNumberTable 1 } ProvDXCNumberEntry ::= SEQUENCE { provDXCNumberIndex Integer32, provDXCNumberNEAddress IpAddress, provDXCTotalNumber Integer32, provDXCEdgeNumOnRestrictedSlots Integer32 } provDXCNumberIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provDXCNumberEntry 1 } provDXCNumberNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provDXCNumberEntry 2 } provDXCTotalNumber OBJECT-TYPE SYNTAX Integer32 (0..2352) MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Number of Cross Connect" ::= { provDXCNumberEntry 3 } provDXCEdgeNumOnRestrictedSlots OBJECT-TYPE SYNTAX Integer32 (0..336) MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Number of Channels for Restricted Slot" ::= { provDXCNumberEntry 4 } provXPICGroup OBJECT IDENTIFIER ::= { provisioningGroup 12 } provXPICTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvXPICEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provXPICGroup 1 } provXPICEntry OBJECT-TYPE SYNTAX ProvXPICEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provXPICIfIndex } ::= { provXPICTable 1 } ProvXPICEntry ::= SEQUENCE { provXPICIfIndex InterfaceIndex, provXPICNEAddress IpAddress, xpicCondLoSignalFail INTEGER, xdemDelayAdjust INTEGER, xdemDelayAdjustNo2 INTEGER } provXPICIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provXPICEntry 1 } provXPICNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provXPICEntry 2 } xpicCondLoSignalFail OBJECT-TYPE SYNTAX INTEGER { invalid(0), mute(1), refloSelflo(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "XPIC Local Fail" ::= { provXPICEntry 3 } xdemDelayAdjust OBJECT-TYPE SYNTAX INTEGER { invalid(0), m32ToM24(2), m24ToM16(3), m16ToM8(4), m8ToP8(5), p8ToP16(6), p16ToP24(7), p24ToP32(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "X-DEM Delay Adjust" ::= { provXPICEntry 4 } xdemDelayAdjustNo2 OBJECT-TYPE SYNTAX INTEGER { invalid(0), m32ToM24(2), m24ToM16(3), m16ToM8(4), m8ToP8(5), p8ToP16(6), p16ToP24(7), p24ToP32(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "X-DEM Delay Adjust" ::= { provXPICEntry 5 } provStm1Group OBJECT IDENTIFIER ::= { provisioningGroup 13 } provStm1PortSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStm1PortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provStm1Group 1 } provStm1PortSetEntry OBJECT-TYPE SYNTAX ProvStm1PortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provStm1PortSetIfIndex } ::= { provStm1PortSetTable 1 } ProvStm1PortSetEntry ::= SEQUENCE { provStm1PortSetIfIndex InterfaceIndex, provStm1PortSetNEAddress IpAddress, stm1PortName DisplayString, stm1PortUsage UsedNotusedValue, stm1PathTraceTxValueJ0 DisplayString, stm1PathTraceRxExpValueJ0 DisplayString } provStm1PortSetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provStm1PortSetEntry 1 } provStm1PortSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provStm1PortSetEntry 2 } stm1PortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Name" ::= { provStm1PortSetEntry 3 } stm1PortUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Port Usage" ::= { provStm1PortSetEntry 4 } stm1PathTraceTxValueJ0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Section Trace Send Value" ::= { provStm1PortSetEntry 5 } stm1PathTraceRxExpValueJ0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected Section Trace Value" ::= { provStm1PortSetEntry 6 } provStm1ChPortSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStm1ChPortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provStm1Group 2 } provStm1ChPortSetEntry OBJECT-TYPE SYNTAX ProvStm1ChPortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provStm1ChPortSetIfIndex } ::= { provStm1ChPortSetTable 1 } ProvStm1ChPortSetEntry ::= SEQUENCE { provStm1ChPortSetIfIndex InterfaceIndex, provStm1ChPortSetNEAddress IpAddress, stm1ModeSetting INTEGER, stm1LowOrderPathTrace Integer32, stm1PathTraceTxValueJ1 DisplayString, stm1PathTraceRxExpValueJ1 DisplayString } provStm1ChPortSetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provStm1ChPortSetEntry 1 } provStm1ChPortSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provStm1ChPortSetEntry 2 } stm1ModeSetting OBJECT-TYPE SYNTAX INTEGER { invalid(0), through(1), channelized(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "STM-1 Mode" ::= { provStm1ChPortSetEntry 3 } stm1LowOrderPathTrace OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Low Order Path Trace Send Value" ::= { provStm1ChPortSetEntry 4 } stm1PathTraceTxValueJ1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "High Order Path Trace Send Value" ::= { provStm1ChPortSetEntry 5 } stm1PathTraceRxExpValueJ1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected High Order Path Trace Value" ::= { provStm1ChPortSetEntry 6 } provStm1CardSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStm1CardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provStm1Group 3 } provStm1CardSetEntry OBJECT-TYPE SYNTAX ProvStm1CardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provStm1CardSetIndex } ::= { provStm1CardSetTable 1 } ProvStm1CardSetEntry ::= SEQUENCE { provStm1CardSetIndex Integer32, provStm1CardSetNEAddress IpAddress, stm1TraceUsageSelect INTEGER, stm1TraceMismatchAction EnableDisableValue, stm1SfAlarmTransfer OffOnValue, stm1SdAlarmTransfer OffOnValue, stm1CardLineClkSelect Integer32 } provStm1CardSetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provStm1CardSetEntry 1 } provStm1CardSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provStm1CardSetEntry 2 } stm1TraceUsageSelect OBJECT-TYPE SYNTAX INTEGER { invalid(0), j0(1), j1(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trace Mode" ::= { provStm1CardSetEntry 3 } stm1TraceMismatchAction OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Trace Mismatch AIS Generation Action" ::= { provStm1CardSetEntry 4 } stm1SfAlarmTransfer OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Signal Fail is transferred as TU-AIS. New definition for 400." ::= { provStm1CardSetEntry 5 } stm1SdAlarmTransfer OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Signal Degrade is transferred by N2 byte. New definition for 400." ::= { provStm1CardSetEntry 6 } stm1CardLineClkSelect OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the timing source from two STM1 channels. New definition for 400." ::= { provStm1CardSetEntry 7 } provExtClockGroup OBJECT IDENTIFIER ::= { provisioningGroup 14 } provTimingSourceGroup OBJECT IDENTIFIER ::= { provExtClockGroup 2 } provClkSelect400Table OBJECT-TYPE SYNTAX SEQUENCE OF ProvClkSelect400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTimingSourceGroup 11 } provClkSelect400Entry OBJECT-TYPE SYNTAX ProvClkSelect400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provClkSelect400Index } ::= { provClkSelect400Table 1 } ProvClkSelect400Entry ::= SEQUENCE { provClkSelect400Index Integer32, provClkSelect400NEAddress IpAddress, e1LineClkSelect400 Integer32, gbeLineClkSelect400 Integer32, mbTimingSourceSelect400 INTEGER, waitToRestore400 INTEGER, clockSourceSelectiveMode400 INTEGER, gbeLineClkSelect2 Integer32 } provClkSelect400Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provClkSelect400Entry 1 } provClkSelect400NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provClkSelect400Entry 2 } e1LineClkSelect400 OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Line Clock Select" ::= { provClkSelect400Entry 3 } gbeLineClkSelect400 OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the timing source from GbE channels on Main Card. range : 1 - 8 [iPASOLINK VR 4] 1 - 6 [iPASOLINK 400A/VR 2] 1 - 4 [iPASOLINK 400/1000/EX] 1 - 2, 5 - 6[iPASOLINK 200A/iX] 1 - 3[iPASOLINK EX/A]" ::= { provClkSelect400Entry 4 } mbTimingSourceSelect400 OBJECT-TYPE SYNTAX INTEGER { invalid(0), internal(1), dmrLineclk1(2), dmrLineclk2(3), auto(4), dmrLineclk3(5), dmrLineclk4(6), dmrLineclk5(7), dmrLineclk6(8), dmrLineclk7(9), dmrLineclk8(10), dmrLineclk9(11), dmrLineclk10(12), dmrLineclk11(13), dmrLineclk12(14), dmrLineclk13(15), dmrLineclk14(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Timing Source." ::= { provClkSelect400Entry 5 } waitToRestore400 OBJECT-TYPE SYNTAX INTEGER { invalid(0), sec0(1), sec10(2), sec20(3), sec30(4), min1(5), min2(6), min3(7), min4(8), min5(9), min6(10), min7(11), min8(12), min9(13), min10(14), min11(15), min12(16), min13(17), min14(18), min15(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wait To Restore Timer" ::= { provClkSelect400Entry 6 } clockSourceSelectiveMode400 OBJECT-TYPE SYNTAX INTEGER { qlMode(1), plMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clock Source Selective Mode" ::= { provClkSelect400Entry 7 } gbeLineClkSelect2 OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the timing source from GbE channels on Main Card. range : 1 - 6 [iPASOLINK 400A] 1 - 4 [iPASOLINK 400/1000/EX/VR 4/VR 2] 1 - 2, 5 - 6[iPASOLINK 200A/iX] 1 [iPASOLINK EX/A]" ::= { provClkSelect400Entry 8 } provTimingSourceSelect400Table OBJECT-TYPE SYNTAX SEQUENCE OF ProvTimingSourceSelect400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provTimingSourceGroup 12 } provTimingSourceSelect400Entry OBJECT-TYPE SYNTAX ProvTimingSourceSelect400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provTimingSourceSelect400Index } ::= { provTimingSourceSelect400Table 1 } ProvTimingSourceSelect400Entry ::= SEQUENCE { provTimingSourceSelect400Index Integer32, provTimingSourceSelect400NEAddress IpAddress, clk2MTimingSource400Select INTEGER, clk2MTimingSource400Priority Integer32, forcedSsmValue400 INTEGER, ssmUsage400 UsedNotusedValue } provTimingSourceSelect400Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provTimingSourceSelect400Entry 1 } provTimingSourceSelect400NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provTimingSourceSelect400Entry 2 } clk2MTimingSource400Select OBJECT-TYPE SYNTAX INTEGER { noEntry(0), extClk1(1), extClk2(2), lineClk1(3), lineClk2(4), lineClk3(5), lineClk4(6), lineClk5(7), lineClk6(8), lineClk7(9), lineClk8(10), lineClk9(11), lineClk10(12), lineClk11(13), lineClk12(14), lineClk13(15), lineClk14(16), gbeLineClk1(17), gbeLineClk2(18), e1LineClk(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Timing Source Select" ::= { provTimingSourceSelect400Entry 3 } clk2MTimingSource400Priority OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Timing Source Priority Level" ::= { provTimingSourceSelect400Entry 4 } forcedSsmValue400 OBJECT-TYPE SYNTAX INTEGER { qlPrc(1), qlSsuA(2), qlSsuB(3), qlSec(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forced SSM Value" ::= { provTimingSourceSelect400Entry 5 } ssmUsage400 OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "SSM Usage" ::= { provTimingSourceSelect400Entry 6 } provExtClock400Table OBJECT-TYPE SYNTAX SEQUENCE OF ProvExtClock400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provExtClockGroup 11 } provExtClock400Entry OBJECT-TYPE SYNTAX ProvExtClock400Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provExtClock400Index } ::= { provExtClock400Table 1 } ProvExtClock400Entry ::= SEQUENCE { provExtClock400Index INTEGER, provExtClock400NEAddress IpAddress, provExtClock400ExtImpedance INTEGER, provExtClock400ExtInterface INTEGER, provExtClock400Crc OffOnValue, provExtClock400Ssm INTEGER, provExtClock400SaBit INTEGER, provExtClock400MessagePathThrough OffOnValue, provExtClock400QlThreshold INTEGER, provExtClock400ThresholdAisGen UsedNotusedValue, provExtClock400ExtClkSel INTEGER, provExtClock400AisHizSelect INTEGER, provExtClock400DnuIns OffOnValue, provExtClock400InsQlValue INTEGER } provExtClock400Index OBJECT-TYPE SYNTAX INTEGER { extclk(1), extclk2(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provExtClock400Entry 1 } provExtClock400NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provExtClock400Entry 2 } provExtClock400ExtImpedance OBJECT-TYPE SYNTAX INTEGER { invalid(0), ohm120(1), ohm75(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "External Clock Impedance" ::= { provExtClock400Entry 3 } provExtClock400ExtInterface OBJECT-TYPE SYNTAX INTEGER { invalid(0), bps(1), hz(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "External Clock Interface" ::= { provExtClock400Entry 4 } provExtClock400Crc OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "CRC On / Off" ::= { provExtClock400Entry 5 } provExtClock400Ssm OBJECT-TYPE SYNTAX INTEGER { invalid(0), notSupport(1), support(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSM Support" ::= { provExtClock400Entry 6 } provExtClock400SaBit OBJECT-TYPE SYNTAX INTEGER { invalid(0), sa4(1), sa5(2), sa6(3), sa7(4), sa8(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sa Bit" ::= { provExtClock400Entry 7 } provExtClock400MessagePathThrough OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Message Pass Through" ::= { provExtClock400Entry 8 } provExtClock400QlThreshold OBJECT-TYPE SYNTAX INTEGER { qlPrc(1), qlSsuA(2), qlSsuB(3), qlSec(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "QL Threshold" ::= { provExtClock400Entry 9 } provExtClock400ThresholdAisGen OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold AIS Generation Mode" ::= { provExtClock400Entry 10 } provExtClock400ExtClkSel OBJECT-TYPE SYNTAX INTEGER { notSelect(0), neClk(1), lineClk1(2), lineClk2(3), lineClk3(4), lineClk4(5), lineClk5(6), lineClk6(7), lineClk7(8), lineClk8(9), lineClk9(10), lineClk10(11), lineClk11(12), lineClk12(13), lineClk13(14), lineClk14(15), gbeLineClk1(16), gbeLineClk2(17), e1LineClk(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "External Clock Out Select" ::= { provExtClock400Entry 11 } provExtClock400AisHizSelect OBJECT-TYPE SYNTAX INTEGER { invalid(0), hiZ(1), ais(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Generation Mode" ::= { provExtClock400Entry 12 } provExtClock400DnuIns OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Timing Loop Prevention" ::= { provExtClock400Entry 13 } provExtClock400InsQlValue OBJECT-TYPE SYNTAX INTEGER { qlPrc(1), qlSsuA(2), qlSsuB(3), qlOriginal(4), qlSec(5), qlDnu(6), qlInvx(7), qlFailed(8), notAvail(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forced SSM Send Value" ::= { provExtClock400Entry 14 } provRelayGroup OBJECT IDENTIFIER ::= { provisioningGroup 15 } provRelayConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvRelayConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains relay control and alarm output configuration." ::= { provRelayGroup 1 } provRelayConfigEntry OBJECT-TYPE SYNTAX ProvRelayConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provRelayConfigIndex } ::= { provRelayConfigTable 1 } ProvRelayConfigEntry ::= SEQUENCE { provRelayConfigIndex INTEGER, provRelayConfigNEAddress IpAddress, provRelayConfigData OCTET STRING, provRelayConfigData2 OCTET STRING } provRelayConfigIndex OBJECT-TYPE SYNTAX INTEGER { rl1(1), rl2(2), rl3(3), rl4(4), rl5(5), rl6(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provRelayConfigEntry 1 } provRelayConfigNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provRelayConfigEntry 2 } provRelayConfigData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(560..560)) MAX-ACCESS read-write STATUS current DESCRIPTION "configure alarms to be outputted to relay." ::= { provRelayConfigEntry 3 } provRelayConfigData2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(100..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "configure alarms to be outputted to relay." ::= { provRelayConfigEntry 4 } provClusterAssignInputTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvClusterAssignInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Cluster Alarm Input assignment." ::= { provRelayGroup 2 } provClusterAssignInputEntry OBJECT-TYPE SYNTAX ProvClusterAssignInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provClusterAssignInputIfIndex } ::= { provClusterAssignInputTable 1 } ProvClusterAssignInputEntry ::= SEQUENCE { provClusterAssignInputIfIndex InterfaceIndex, provClusterAssignInputNEAddress IpAddress, relayClusterAssignInput Integer32 } provClusterAssignInputIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provClusterAssignInputEntry 1 } provClusterAssignInputNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provClusterAssignInputEntry 2 } relayClusterAssignInput OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Cluster Alarm Input assign" ::= { provClusterAssignInputEntry 3 } provClusterAssignOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvClusterAssignOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Cluster Alarm Output assignment." ::= { provRelayGroup 3 } provClusterAssignOutputEntry OBJECT-TYPE SYNTAX ProvClusterAssignOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provClusterAssignOutputIndex } ::= { provClusterAssignOutputTable 1 } ProvClusterAssignOutputEntry ::= SEQUENCE { provClusterAssignOutputIndex Integer32, provClusterAssignOutputNEAddress IpAddress, relayClusterAssignOutput Integer32, provHkcOutputSetting INTEGER } provClusterAssignOutputIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provClusterAssignOutputEntry 1 } provClusterAssignOutputNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provClusterAssignOutputEntry 2 } relayClusterAssignOutput OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Cluster Alarm Output assignment." ::= { provClusterAssignOutputEntry 3 } provHkcOutputSetting OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), alarm(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "House Keeping Control Output setting." ::= { provClusterAssignOutputEntry 4 } provEOWGroup OBJECT IDENTIFIER ::= { provisioningGroup 16 } provEOWCallPolarityTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEOWCallPolarityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains EOW Call Polarity setting." ::= { provEOWGroup 1 } provEOWCallPolarityEntry OBJECT-TYPE SYNTAX ProvEOWCallPolarityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEOWCallPolaritySlotIndex } ::= { provEOWCallPolarityTable 1 } ProvEOWCallPolarityEntry ::= SEQUENCE { provEOWCallPolaritySlotIndex Integer32, provEOWCallPolarityNEAddress IpAddress, provCallPolarity INTEGER } provEOWCallPolaritySlotIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEOWCallPolarityEntry 1 } provEOWCallPolarityNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provEOWCallPolarityEntry 2 } provCallPolarity OBJECT-TYPE SYNTAX INTEGER { invalid(0), low(1), high(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "EOW Call Polarity setting." ::= { provEOWCallPolarityEntry 3 } provEOWDscTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEOWDscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains EOW DSC setting." ::= { provEOWGroup 2 } provEOWDscEntry OBJECT-TYPE SYNTAX ProvEOWDscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEOWDscIfIndex } ::= { provEOWDscTable 1 } ProvEOWDscEntry ::= SEQUENCE { provEOWDscIfIndex InterfaceIndex, provEOWDscNEAddress IpAddress, provEOWDscUsage UsedNotusedValue } provEOWDscIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEOWDscEntry 1 } provEOWDscNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provEOWDscEntry 2 } provEOWDscUsage OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "EOW DSC setting." ::= { provEOWDscEntry 3 } provSCAssignGroup OBJECT IDENTIFIER ::= { provisioningGroup 17 } provSCAssignSetGroup OBJECT IDENTIFIER ::= { provSCAssignGroup 1 } provSCAssignV11Table OBJECT-TYPE SYNTAX SEQUENCE OF ProvSCAssignV11Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains V11 Interface Direction setting and assignment." ::= { provSCAssignSetGroup 1 } provSCAssignV11Entry OBJECT-TYPE SYNTAX ProvSCAssignV11Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSCAssignV11Index } ::= { provSCAssignV11Table 1 } ProvSCAssignV11Entry ::= SEQUENCE { provSCAssignV11Index INTEGER, provSCAssignV11NEAddress IpAddress, v11Interface INTEGER, v11Assign Integer32 } provSCAssignV11Index OBJECT-TYPE SYNTAX INTEGER { port1(1), port2(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSCAssignV11Entry 1 } provSCAssignV11NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSCAssignV11Entry 2 } v11Interface OBJECT-TYPE SYNTAX INTEGER { invalid(0), co(1), contra(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "V11 Interface Direction setting." ::= { provSCAssignV11Entry 3 } v11Assign OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "V11 assignment." ::= { provSCAssignV11Entry 4 } provSCAssignRs232cTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSCAssignRs232cEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains RS232C Interface assignment." ::= { provSCAssignSetGroup 2 } provSCAssignRs232cEntry OBJECT-TYPE SYNTAX ProvSCAssignRs232cEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSCAssignRs232cIndex } ::= { provSCAssignRs232cTable 1 } ProvSCAssignRs232cEntry ::= SEQUENCE { provSCAssignRs232cIndex INTEGER, provSCAssignRs232cNEAddress IpAddress, rs232cAssign Integer32 } provSCAssignRs232cIndex OBJECT-TYPE SYNTAX INTEGER { port1(1), port2(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSCAssignRs232cEntry 1 } provSCAssignRs232cNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSCAssignRs232cEntry 2 } rs232cAssign OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RS232C assignment." ::= { provSCAssignRs232cEntry 3 } provScSohThroughSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvScSohThroughSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains SOH Through setting." ::= { provSCAssignGroup 2 } provScSohThroughSetEntry OBJECT-TYPE SYNTAX ProvScSohThroughSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provScSohThroughSetIfIndex } ::= { provScSohThroughSetTable 1 } ProvScSohThroughSetEntry ::= SEQUENCE { provScSohThroughSetIfIndex InterfaceIndex, provScSohThroughSetNEAddress IpAddress, scSohThroughSetting Integer32 } provScSohThroughSetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provScSohThroughSetEntry 1 } provScSohThroughSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provScSohThroughSetEntry 2 } scSohThroughSetting OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "SOH Through setting." ::= { provScSohThroughSetEntry 3 } provSCAssignNoteTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSCAssignNoteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains V11 setting for log/trap." ::= { provSCAssignGroup 3 } provSCAssignNoteEntry OBJECT-TYPE SYNTAX ProvSCAssignNoteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSCAssignNoteIndex } ::= { provSCAssignNoteTable 1 } ProvSCAssignNoteEntry ::= SEQUENCE { provSCAssignNoteIndex Integer32, provSCAssignNoteNEAddress IpAddress, provSCAssignNoteV11Interface DisplayString, provSCAssignNoteV11SCAssign DisplayString } provSCAssignNoteIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSCAssignNoteEntry 1 } provSCAssignNoteNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSCAssignNoteEntry 2 } provSCAssignNoteV11Interface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "V11 Interface setting." ::= { provSCAssignNoteEntry 3 } provSCAssignNoteV11SCAssign OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "V11 assignment setting." ::= { provSCAssignNoteEntry 4 } provAmrOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvAmrOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains AMR Operation control." ::= { provisioningGroup 18 } provAmrOperationEntry OBJECT-TYPE SYNTAX ProvAmrOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provAmrOperationIfIndex } ::= { provAmrOperationTable 1 } ProvAmrOperationEntry ::= SEQUENCE { provAmrOperationIfIndex InterfaceIndex, provAmrOperationNEAddress IpAddress, cnThresholdOffset Integer32, cnHysteresysOffset Integer32, rslThresholdOffset Integer32, rslHysteresysOffset Integer32, atpcThresholdOffset Integer32, decisionInterval Integer32, holdProtction Integer32, promoteProtection Integer32, degradeProtection Integer32 } provAmrOperationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provAmrOperationEntry 1 } provAmrOperationNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provAmrOperationEntry 2 } cnThresholdOffset OBJECT-TYPE SYNTAX Integer32 (-3..3) MAX-ACCESS read-write STATUS current DESCRIPTION "CNR Threshold Offset" ::= { provAmrOperationEntry 3 } cnHysteresysOffset OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "CNR Hysteresis Offset" ::= { provAmrOperationEntry 4 } rslThresholdOffset OBJECT-TYPE SYNTAX Integer32 (-3..3) MAX-ACCESS read-write STATUS current DESCRIPTION "RSL Threshold Offset" ::= { provAmrOperationEntry 5 } rslHysteresysOffset OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "RSL Hysteresis Offset" ::= { provAmrOperationEntry 6 } atpcThresholdOffset OBJECT-TYPE SYNTAX Integer32 (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ATPC Threshold Offset" ::= { provAmrOperationEntry 7 } decisionInterval OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Decision Interval" ::= { provAmrOperationEntry 8 } holdProtction OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Hold Protection" ::= { provAmrOperationEntry 9 } promoteProtection OBJECT-TYPE SYNTAX Integer32 (1..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Promote Protection" ::= { provAmrOperationEntry 10 } degradeProtection OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "AMR Degrade Protection" ::= { provAmrOperationEntry 11 } provSoftkeyTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSoftkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provisioningGroup 19 } provSoftkeyEntry OBJECT-TYPE SYNTAX ProvSoftkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSoftkeyIndex } ::= { provSoftkeyTable 1 } ProvSoftkeyEntry ::= SEQUENCE { provSoftkeyIndex Integer32, provSoftkeyNEAddress IpAddress, provRadioCapacity INTEGER, provSfpUseAssign INTEGER } provSoftkeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSoftkeyEntry 1 } provSoftkeyNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSoftkeyEntry 2 } provRadioCapacity OBJECT-TYPE SYNTAX INTEGER { invalid(0), notAssign(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radio Capacity" ::= { provSoftkeyEntry 3 } provSfpUseAssign OBJECT-TYPE SYNTAX INTEGER { invalid(0), notAssign(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "SFP Port Usage" ::= { provSoftkeyEntry 4 } provVlanGroup OBJECT IDENTIFIER ::= { provisioningGroup 20 } provVlanEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN EQUIPMENT TABLE" ::= { provVlanGroup 1 } provVlanEquipmentEntry OBJECT-TYPE SYNTAX ProvVlanEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN EQUIPMENT ENTRY" INDEX { provVlanEquipmentIndex } ::= { provVlanEquipmentTable 1 } ProvVlanEquipmentEntry ::= SEQUENCE { provVlanEquipmentIndex Integer32, provVlanEquipmentNEAddress IpAddress, provVlanEquipmentMode INTEGER, provVlanEquipmentDefaultVid Integer32, provVlanEquipmentDefaultTpid OCTET STRING } provVlanEquipmentIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanEquipmentEntry 1 } provVlanEquipmentNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanEquipmentEntry 2 } provVlanEquipmentMode OBJECT-TYPE SYNTAX INTEGER { dot1q(1), dot1ad(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Mode 1. 802.1q mode 2. 802.1ad mode Note) It is possible to set in ADV/4, ADV/10(STD Read Only-support). (only 802.1q mode in STD)" ::= { provVlanEquipmentEntry 3 } provVlanEquipmentDefaultVid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Default VLAN-ID value range : 1-4094 default : 1 FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provVlanEquipmentEntry 4 } provVlanEquipmentDefaultTpid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2..2)) MAX-ACCESS read-write STATUS current DESCRIPTION "TPID value which is used to identify the frame as an IEEE 802.1Q or 802.1ad tagged frame." ::= { provVlanEquipmentEntry 5 } provVlanCustomerTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanCustomerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CUSTOMER VLAN TABLE" ::= { provVlanGroup 2 } provVlanCustomerEntry OBJECT-TYPE SYNTAX ProvVlanCustomerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CUSTOMER VLAN PORT ENTRY" INDEX { provVlanCustomerIfIndex, provVlanCustomerVlanIndex } ::= { provVlanCustomerTable 1 } ProvVlanCustomerEntry ::= SEQUENCE { provVlanCustomerIfIndex InterfaceIndex, provVlanCustomerVlanIndex Integer32, provVlanCustomerNEAddress IpAddress, provVlanCustomerPort INTEGER, provVlanCustomerRowstatus RowStatus } provVlanCustomerIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCustomerEntry 1 } provVlanCustomerVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCustomerEntry 2 } provVlanCustomerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanCustomerEntry 3 } provVlanCustomerPort OBJECT-TYPE SYNTAX INTEGER { access(1), tunnel(2), trunk(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN TYPE 1. Access(default) 2. Tunnel 3. Trunk FLAG=TRAP|EVLOG" ::= { provVlanCustomerEntry 4 } provVlanCustomerRowstatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP|EVLOG" ::= { provVlanCustomerEntry 5 } provVlanServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provVlanGroup 3 } provVlanServiceEntry OBJECT-TYPE SYNTAX ProvVlanServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provVlanServiceIfIndex, provVlanServiceVlanIndex } ::= { provVlanServiceTable 1 } ProvVlanServiceEntry ::= SEQUENCE { provVlanServiceIfIndex InterfaceIndex, provVlanServiceVlanIndex Integer32, provVlanServiceNEAddress IpAddress, provVlanServicePortType INTEGER, provVlanServiceRowStatus RowStatus } provVlanServiceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanServiceEntry 1 } provVlanServiceVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanServiceEntry 2 } provVlanServiceNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanServiceEntry 3 } provVlanServicePortType OBJECT-TYPE SYNTAX INTEGER { invalid(0), cAccess(1), sTrunk(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Port Type(VLAN ID)" ::= { provVlanServiceEntry 4 } provVlanServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { provVlanServiceEntry 5 } provVlanCBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanCBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provVlanGroup 4 } provVlanCBridgeEntry OBJECT-TYPE SYNTAX ProvVlanCBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provVlanCBridgeIfIndex, provVlanCBridgeSVlanIndex, provVlanCBridgeCVlanIndex } ::= { provVlanCBridgeTable 1 } ProvVlanCBridgeEntry ::= SEQUENCE { provVlanCBridgeIfIndex InterfaceIndex, provVlanCBridgeSVlanIndex Integer32, provVlanCBridgeCVlanIndex Integer32, provVlanCBridgeNEAddress IpAddress, provVlanCBridgePortType INTEGER, provVlanCBridgeRowStatus RowStatus } provVlanCBridgeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCBridgeEntry 1 } provVlanCBridgeSVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCBridgeEntry 2 } provVlanCBridgeCVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCBridgeEntry 3 } provVlanCBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanCBridgeEntry 4 } provVlanCBridgePortType OBJECT-TYPE SYNTAX INTEGER { invalid(0), cBridge(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Port Type(C-VLAN ID)" ::= { provVlanCBridgeEntry 5 } provVlanCBridgeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { provVlanCBridgeEntry 6 } provVlanNameTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN NAME TABLE" ::= { provVlanGroup 5 } provVlanNameEntry OBJECT-TYPE SYNTAX ProvVlanNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN NAME ENTRY" INDEX { provVlanNameVlanIndex } ::= { provVlanNameTable 1 } ProvVlanNameEntry ::= SEQUENCE { provVlanNameVlanIndex Integer32, provVlanNameNEAddress IpAddress, provVlanName DisplayString, provVlanNameRowstatus RowStatus } provVlanNameVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanNameEntry 1 } provVlanNameNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanNameEntry 2 } provVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Service Name" ::= { provVlanNameEntry 3 } provVlanNameRowstatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { provVlanNameEntry 4 } provVlanCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN COUNTER TABLE" ::= { provVlanGroup 7 } provVlanCounterEntry OBJECT-TYPE SYNTAX ProvVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN COUNTER ENTRY" INDEX { provVlanCounterIndex } ::= { provVlanCounterTable 1 } ProvVlanCounterEntry ::= SEQUENCE { provVlanCounterIndex Integer32, provVlanCounterNEAddress IpAddress, provVlanCounterEntryPort InterfaceIndex, provVlanCounterEntryVid Integer32, provVlanCounterRowstatus RowStatus } provVlanCounterIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provVlanCounterEntry 1 } provVlanCounterNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provVlanCounterEntry 2 } provVlanCounterEntryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Port Number" ::= { provVlanCounterEntry 3 } provVlanCounterEntryVid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN ID which becomes a counter target value range : 1-4094 Note) it is possible to set it When the specified VLAN ID exists in specified port. FLAG=TRAP|EVLOG" ::= { provVlanCounterEntry 4 } provVlanCounterRowstatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP|EVLOG" ::= { provVlanCounterEntry 5 } provDot1qPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvDot1qPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port base VLAN Information Table for 802.1q mode. This table provides summarized assigned VLAN information for the specified port. MAX-ACCESS of the object inside of this table is writable. But provisioning function (VLAN assign function through this table) is future support. These objects act as read-only object currently." ::= { provVlanGroup 10 } provDot1qPortVlanEntry OBJECT-TYPE SYNTAX ProvDot1qPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provDot1qPortVlanIfIndex } ::= { provDot1qPortVlanTable 1 } ProvDot1qPortVlanEntry ::= SEQUENCE { provDot1qPortVlanIfIndex InterfaceIndex, provDot1qPortVlanNEAddress IpAddress, provDot1qPortVlanPortType INTEGER, provDot1qPortVlanList IpeVlanListOrZero, provDot1qPortAccessVid IpeVlanIndexOrZero } provDot1qPortVlanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provDot1qPortVlanEntry 1 } provDot1qPortVlanNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provDot1qPortVlanEntry 2 } provDot1qPortVlanPortType OBJECT-TYPE SYNTAX INTEGER { invalid(0), tunnel(1), trunk(2), trunkWithAccess(3), accessOnly(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Port Type. When the port is configured as 'tunnel' port, the object returns value as 'tunnel'. If trunk VLANs are assigned to the port, the object returns value as 'trunk'. Trunk VLANs and Access VLANs are assigned to the port, the value becomes 'trunkWithAccess'. If the port has only access vlan, the value becomes 'accessOnly'." ::= { provDot1qPortVlanEntry 3 } provDot1qPortVlanList OBJECT-TYPE SYNTAX IpeVlanListOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN List. When the 'provDot1qPortVlanPortType' is 'tunnel' port, the object shows tunnel VLANs assigned to the port. The other port type, the object shows trunk VLANs assigned to the port." ::= { provDot1qPortVlanEntry 4 } provDot1qPortAccessVid OBJECT-TYPE SYNTAX IpeVlanIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Access VLAN ID. When the 'provDot1qPortVlanPortType' is 'trunkWithAccess' or 'accessOnly', the object returns access VLAN ID. Otherwise the object returns '0'." ::= { provDot1qPortVlanEntry 5 } provDot1adPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvDot1adPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port base VLAN Information Table for 802.1ad mode. This table provides summarized assigned VLAN information for the specified port. MAX-ACCESS of the object inside of this table is writable. But provisioning function (VLAN assign function through this table) is future support. These objects act as read-only object currently." ::= { provVlanGroup 11 } provDot1adPortVlanEntry OBJECT-TYPE SYNTAX ProvDot1adPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provDot1adPortVlanIfIndex } ::= { provDot1adPortVlanTable 1 } ProvDot1adPortVlanEntry ::= SEQUENCE { provDot1adPortVlanIfIndex InterfaceIndex, provDot1adPortVlanNEAddress IpAddress, provDot1adPortVlanPortType INTEGER, provDot1adPortVlanList IpeVlanListOrZero, provDot1adPortCAccessVid IpeVlanIndexOrZero } provDot1adPortVlanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provDot1adPortVlanEntry 1 } provDot1adPortVlanNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provDot1adPortVlanEntry 2 } provDot1adPortVlanPortType OBJECT-TYPE SYNTAX INTEGER { invalid(0), bridge(1), trunk(2), trunkWithAccess(3), accessOnly(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Port Type. When the port is configured as C-Bridge port, the object returns 'bridge'. If s-trunk VLANs are assigned to the port, the object returns value as 'trunk'. S-Trunk VLANs and C-Access VLANs are assigned to the port, the value becomes 'trunkWithAccess'. If the port has only C-Access vlan, the value becomes 'accessOnly'." ::= { provDot1adPortVlanEntry 3 } provDot1adPortVlanList OBJECT-TYPE SYNTAX IpeVlanListOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN List. When the 'provDot1adPortVlanPortType' is 'bridge' port, the object returns empty value (length 0 string). The other port type, the object shows S-trunk VLANs assigned to the port." ::= { provDot1adPortVlanEntry 4 } provDot1adPortCAccessVid OBJECT-TYPE SYNTAX IpeVlanIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "C-Access VLAN ID. When the 'provDot1adPortVlanPortType' is 'trunkWithAccess' or 'accessOnly', the object returns access VLAN ID. Otherwise the object returns '0'." ::= { provDot1adPortVlanEntry 5 } provQosGroup OBJECT IDENTIFIER ::= { provisioningGroup 21 } provQosEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Equipment Table" ::= { provQosGroup 1 } provQosEquipmentEntry OBJECT-TYPE SYNTAX ProvQosEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Equipment Entry" INDEX { provQosEquipmentIndex } ::= { provQosEquipmentTable 1 } ProvQosEquipmentEntry ::= SEQUENCE { provQosEquipmentIndex Integer32, provQosEquipmentNEAddress IpAddress, provQosEquipmentClassifyProfile Integer32, provQosEquipmentClassMode INTEGER, provQosEquipmentClassificationMode INTEGER } provQosEquipmentIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosEquipmentEntry 1 } provQosEquipmentNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosEquipmentEntry 2 } provQosEquipmentClassifyProfile OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Classify Profile Index value range : 0 - 3" ::= { provQosEquipmentEntry 3 } provQosEquipmentClassMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), qos4class(1), qos8class(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the Equipment QoS Class mode. When the object is changed, provQosEgressPortSchedMode is initialized depends on the QoS Class mode. provQosEgressPortSchedMode is changed to sp4, when the qos mode is set to qos4class, and provQosEgressPortSchedMode is changed to sp1dwrr7, when the qos mode is set to qos8class." ::= { provQosEquipmentEntry 4 } provQosEquipmentClassificationMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), qosequipmode(1), qosportmode(2), qosequipvlanmode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Classification Mode" ::= { provQosEquipmentEntry 5 } provQosClassifyTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Qos Classify Table. This table defines classifier for the input frames. The frames whose 'provQosClassifyField' is 'provQosClassifyPriority' are mapped to Internal Priority 'provQosClassifyPriority'." ::= { provQosGroup 2 } provQosClassifyEntry OBJECT-TYPE SYNTAX ProvQosClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosClassifyProfileIndex, provQosClassifyEntryIndex } ::= { provQosClassifyTable 1 } ProvQosClassifyEntry ::= SEQUENCE { provQosClassifyProfileIndex Integer32, provQosClassifyEntryIndex Integer32, provQosClassifyNEAddress IpAddress, provQosClassifyField INTEGER, provQosClassifyPriority Integer32, provQosClassifyInternalPriority Integer32, provQosClassifyRowstatus RowStatus } provQosClassifyProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosClassifyEntry 1 } provQosClassifyEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosClassifyEntry 2 } provQosClassifyNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosClassifyEntry 3 } provQosClassifyField OBJECT-TYPE SYNTAX INTEGER { unuse(-1), vlanCos(1), ipv4Precedence(2), ipv4Dscp(3), ipv6Dscp(4), mplsExp(5), other(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "QoS Classify Field. This object specifies classify field such as CoS value, DSCP value. If the value of this object is 'other', the entry acts as default entry. i.e. the 'other' entry matches all frames which are not matched to the other entries. And 'other' entry cannot be created by the manager, 'other' entry is created as 64th entry by the agent." ::= { provQosClassifyEntry 4 } provQosClassifyPriority OBJECT-TYPE SYNTAX Integer32 (-1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "QoS Classify Priority (value)." ::= { provQosClassifyEntry 5 } provQosClassifyInternalPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "QoS Classify Internal Priority. The frames which are matched to the entry are mapped to the internal prioiry specified by this object." ::= { provQosClassifyEntry 6 } provQosClassifyRowstatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table. The entry whose 'provQosClassifyEntryIndex' is 64 is created automatically by the agent, and cannot be created and deleted by manager." ::= { provQosClassifyEntry 7 } provQosIngressPolicingProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosIngressPolicingProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Policer Profile Table" ::= { provQosGroup 3 } provQosIngressPolicingProfileEntry OBJECT-TYPE SYNTAX ProvQosIngressPolicingProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Policer Profile Entry" INDEX { provQosIngressPolicingProfileProfileIndex } ::= { provQosIngressPolicingProfileTable 1 } ProvQosIngressPolicingProfileEntry ::= SEQUENCE { provQosIngressPolicingProfileProfileIndex Integer32, provQosIngressPolicingProfileNEAddress IpAddress, provQosIngressPolicingProfileEir Integer32, provQosIngressPolicingProfileCir Integer32, provQosIngressPolicingProfileEbs Integer32, provQosIngressPolicingProfileCbs Integer32 } provQosIngressPolicingProfileProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosIngressPolicingProfileEntry 1 } provQosIngressPolicingProfileNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosIngressPolicingProfileEntry 2 } provQosIngressPolicingProfileEir OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "range : 0 - 1000000 (iPASOLINK200/400/1000series/EX/iX)" ::= { provQosIngressPolicingProfileEntry 3 } provQosIngressPolicingProfileCir OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "range : 0 - 1000000 (iPASOLINK200/400/1000series/EX/iX)" ::= { provQosIngressPolicingProfileEntry 4 } provQosIngressPolicingProfileEbs OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "EBS value range : 0Kbyte - 128KByte Default : 0KBy" ::= { provQosIngressPolicingProfileEntry 5 } provQosIngressPolicingProfileCbs OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "CBS value range : 1Kbyte - 64KByte Default : 24Kbyte" ::= { provQosIngressPolicingProfileEntry 6 } provQosIngressPolicingTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosIngressPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Policer Table" ::= { provQosGroup 4 } provQosIngressPolicingEntry OBJECT-TYPE SYNTAX ProvQosIngressPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Policer Entry" INDEX { provQosIngressPolicingEntryIndex } ::= { provQosIngressPolicingTable 1 } ProvQosIngressPolicingEntry ::= SEQUENCE { provQosIngressPolicingEntryIndex Integer32, provQosIngressPolicingEntryNEAddress IpAddress, provQosIngressPolicingEntryPortNumber Integer32, provQosIngressPolicingEntryVlanNumber Integer32, provQosIngressPolicingEntryPriorityNumber Integer32, provQosIngressPolicingEntryProfileNumber Integer32, provQosIngressPolicingEntryMplsLabel Integer32, provQosIngressPolicingEntryReserve2 Integer32, provQosIngressPolicingEntryReserve3 Integer32, provQosIngressPolicingEntryRowstatus RowStatus } provQosIngressPolicingEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosIngressPolicingEntry 1 } provQosIngressPolicingEntryNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosIngressPolicingEntry 2 } provQosIngressPolicingEntryPortNumber OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Port Number value range : 0 - 0x7FFFFFFF, unuse(-1) FLAG=TRAP|EVLOG" ::= { provQosIngressPolicingEntry 3 } provQosIngressPolicingEntryVlanNumber OBJECT-TYPE SYNTAX Integer32 (-1..-1|1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Number value range : 1 - 4094, unuse(-1) FLAG=TRAP|EVLOG" ::= { provQosIngressPolicingEntry 4 } provQosIngressPolicingEntryPriorityNumber OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Internal Priority value range : 0 - 7, unuse(-1) FLAG=TRAP|EVLOG" ::= { provQosIngressPolicingEntry 5 } provQosIngressPolicingEntryProfileNumber OBJECT-TYPE SYNTAX Integer32 (-1..-1|1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "Policer Profile Number value range : 1 - 16 (iPASOLINK200/400/1000series/EX/iX) 1 - 64 (iPASOLINK VR series) unuse(-1) FLAG=TRAP|EVLOG" ::= { provQosIngressPolicingEntry 6 } provQosIngressPolicingEntryMplsLabel OBJECT-TYPE SYNTAX Integer32 (-1..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "QoS Ingress Policing Entry MPLS Label" ::= { provQosIngressPolicingEntry 7 } provQosIngressPolicingEntryReserve2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "reserved." ::= { provQosIngressPolicingEntry 8 } provQosIngressPolicingEntryReserve3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "reserved." ::= { provQosIngressPolicingEntry 9 } provQosIngressPolicingEntryRowstatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table." ::= { provQosIngressPolicingEntry 10 } provQosEgressPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosEgressPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Egress Port Table" ::= { provQosGroup 5 } provQosEgressPortEntry OBJECT-TYPE SYNTAX ProvQosEgressPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Egress Port Entry" INDEX { provQosEgressPortIfIndex } ::= { provQosEgressPortTable 1 } ProvQosEgressPortEntry ::= SEQUENCE { provQosEgressPortIfIndex InterfaceIndex, provQosEgressPortNEAddress IpAddress, provQosEgressPortSchedMode INTEGER, provQosEgressPortDropMode INTEGER, provQosEgressPortInternalPriority0Class Integer32, provQosEgressPortInternalPriority1Class Integer32, provQosEgressPortInternalPriority2Class Integer32, provQosEgressPortInternalPriority3Class Integer32, provQosEgressPortInternalPriority4Class Integer32, provQosEgressPortInternalPriority5Class Integer32, provQosEgressPortInternalPriority6Class Integer32, provQosEgressPortInternalPriority7Class Integer32, provQosEgressPortPortShaperRate Integer32 } provQosEgressPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosEgressPortEntry 1 } provQosEgressPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 2 } provQosEgressPortSchedMode OBJECT-TYPE SYNTAX INTEGER { sp2(1), sp4(2), sp1-dwrr3(3), dwrr4(4), sp1dwrr7(5), sp2dwrr6(6), sp8(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Scheduling Mode Changing provQosEgressPortSchedMode, provQosEgressPort- InternalPriority0Class to provQosEgressPortInternal- Priority7Class will change. FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 3 } provQosEgressPortDropMode OBJECT-TYPE SYNTAX INTEGER { wtd(1), wred(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Egress Drop Mode 1. WTD(Weighted Tail Drop) 2. WRED FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 4 } provQosEgressPortInternalPriority0Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 0 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 5 } provQosEgressPortInternalPriority1Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 1 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 6 } provQosEgressPortInternalPriority2Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 2 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 7 } provQosEgressPortInternalPriority3Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 3 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 8 } provQosEgressPortInternalPriority4Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 4 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 9 } provQosEgressPortInternalPriority5Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 5 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 10 } provQosEgressPortInternalPriority6Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 6 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 11 } provQosEgressPortInternalPriority7Class OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of internal priority 7 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP|EVLOG" ::= { provQosEgressPortEntry 12 } provQosEgressPortPortShaperRate OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures Port base shaper rate. The acceptable range depends on physical bandwidth." ::= { provQosEgressPortEntry 13 } provQosEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Egress Class Table" ::= { provQosGroup 6 } provQosEgressEntry OBJECT-TYPE SYNTAX ProvQosEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Egress Class Entry" INDEX { provQosEgressIfIndex, provQosEgressClassIndex } ::= { provQosEgressTable 1 } ProvQosEgressEntry ::= SEQUENCE { provQosEgressIfIndex InterfaceIndex, provQosEgressClassIndex Integer32, provQosEgressClassNEAddress IpAddress, provQosEgressClassShaperRate Integer32, provQosEgressClassMinimumRate Integer32, provQosEgressClassDWRRWeight Integer32, provQosEgressQueueLength Integer32, provQosEgressWtdYellowFrameThreshold Integer32, provQosEgressWredYellowFrameThreshold Integer32, provQosEgressWredGreenFrameThreshold Integer32 } provQosEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosEgressEntry 1 } provQosEgressClassIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosEgressEntry 2 } provQosEgressClassNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosEgressEntry 3 } provQosEgressClassShaperRate OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the Class based shaper rate. The acceptable range depends on the physical port type." ::= { provQosEgressEntry 4 } provQosEgressClassMinimumRate OBJECT-TYPE SYNTAX Integer32 (0..1000000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object configures the Class based minimum rate." ::= { provQosEgressEntry 5 } provQosEgressClassDWRRWeight OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Class Shaper Weight value range : 1 - 127 Default : 1 FLAG=TRAP|EVLOG" ::= { provQosEgressEntry 6 } provQosEgressQueueLength OBJECT-TYPE SYNTAX Integer32 (16..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "Queue Length per Class." ::= { provQosEgressEntry 7 } provQosEgressWtdYellowFrameThreshold OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WTD Yellow Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP|EVLOG" ::= { provQosEgressEntry 8 } provQosEgressWredYellowFrameThreshold OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Yellow Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP|EVLOG" ::= { provQosEgressEntry 9 } provQosEgressWredGreenFrameThreshold OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Green Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP|EVLOG" ::= { provQosEgressEntry 10 } provQosFloodControlEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosFloodControlEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provQosGroup 7 } provQosFloodControlEquipmentEntry OBJECT-TYPE SYNTAX ProvQosFloodControlEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosFloodControlEquipmentIndex } ::= { provQosFloodControlEquipmentTable 1 } ProvQosFloodControlEquipmentEntry ::= SEQUENCE { provQosFloodControlEquipmentIndex Integer32, provQosFloodControlEquipmentNEAddress IpAddress, provQosFloodControlEquipmentFrameType INTEGER, provQosFloodControlEquipmentRate Integer32 } provQosFloodControlEquipmentIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosFloodControlEquipmentEntry 1 } provQosFloodControlEquipmentNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosFloodControlEquipmentEntry 2 } provQosFloodControlEquipmentFrameType OBJECT-TYPE SYNTAX INTEGER { unknownUnicast(1), multicast(2), broadcast(3) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Frame Type Values: unknownUnicast(1), multicast(2), broadcast(3)" ::= { provQosFloodControlEquipmentEntry 3 } provQosFloodControlEquipmentRate OBJECT-TYPE SYNTAX Integer32 (1000..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Class Shaper Rate value range : 1Mbps - 1000Mbps" DEFVAL { 1000000 } ::= { provQosFloodControlEquipmentEntry 4 } provQosFloodControlTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosFloodControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provQosGroup 8 } provQosFloodControlEntry OBJECT-TYPE SYNTAX ProvQosFloodControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosFloodControlIfIndex } ::= { provQosFloodControlTable 1 } ProvQosFloodControlEntry ::= SEQUENCE { provQosFloodControlIfIndex InterfaceIndex, provQosFloodControlNEAddress IpAddress, provQosFloodControlFrameType INTEGER, provQosFloodControlEnabled EnableDisableValue } provQosFloodControlIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosFloodControlEntry 1 } provQosFloodControlNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosFloodControlEntry 2 } provQosFloodControlFrameType OBJECT-TYPE SYNTAX INTEGER { unknownUnicast(1), multicast(2), broadcast(3) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Frame Type Values: unknownUnicast(1), multicast(2), broadcast(3)" ::= { provQosFloodControlEntry 3 } provQosFloodControlEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flood Control Enable/Disable Values: invalid(0), disable(1), enable(2)" DEFVAL { disable } ::= { provQosFloodControlEntry 4 } provQosPortClassifyTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosPortClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the classify mode for port base QoS." ::= { provQosGroup 9 } provQosPortClassifyEntry OBJECT-TYPE SYNTAX ProvQosPortClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosPortClassifyIfIndex } ::= { provQosPortClassifyTable 1 } ProvQosPortClassifyEntry ::= SEQUENCE { provQosPortClassifyIfIndex InterfaceIndex, provQosPortClassifyNEAddress IpAddress, provQosPortClassifyField INTEGER, provQosPortClassifyPriority Integer32 } provQosPortClassifyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosPortClassifyEntry 1 } provQosPortClassifyNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosPortClassifyEntry 2 } provQosPortClassifyField OBJECT-TYPE SYNTAX INTEGER { unuse(-1), port(1), ctagCos(2), stagCos(3), v4v6Dscp(4), v4Precedence(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the port base QoS mode. when the object is configured as 'port' mode, the system classifies all frames which are received on the port as 'provQosPortClassifyPriority'. On 'ctagCos' mode, the system classifies received frames based on the CoS value of C-tag. 'stagCos' mode is similar to 'ctagCos', but this mode is not available on dot1q mode. On 'v4v6Dscp' mode, the system classifies frames based on the DSCP value. On the 'mplsExp' mode, the system classifies MPLS frames based on MPLS Exp value." ::= { provQosPortClassifyEntry 3 } provQosPortClassifyPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Internal Priority for port base Qos. When the classifying schema is not applicable to received frames, the frames are classified as 'provQosPortClassifyPriority'." ::= { provQosPortClassifyEntry 4 } provQosPortClassifyDscpTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosPortClassifyDscpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the mapping of DSCP value to internal Priority. This configuration is applicable only when the system is running on the port base QoS mode." ::= { provQosGroup 10 } provQosPortClassifyDscpEntry OBJECT-TYPE SYNTAX ProvQosPortClassifyDscpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosPortClassifyDscpProfileIndex, provQosPortClassifyDscpEntryIndex } ::= { provQosPortClassifyDscpTable 1 } ProvQosPortClassifyDscpEntry ::= SEQUENCE { provQosPortClassifyDscpProfileIndex Integer32, provQosPortClassifyDscpEntryIndex Integer32, provQosPortClassifyDscpNEAddress IpAddress, provQosPortClassifyDscpPriority Integer32, provQosPortClassifyDscpInternalPriority Integer32 } provQosPortClassifyDscpProfileIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosPortClassifyDscpEntry 1 } provQosPortClassifyDscpEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosPortClassifyDscpEntry 2 } provQosPortClassifyDscpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosPortClassifyDscpEntry 3 } provQosPortClassifyDscpPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the DSCP value for DCSP to internal priority mapping. And this object acts as read-only object, this means the system cannot accept the change request to this object." ::= { provQosPortClassifyDscpEntry 4 } provQosPortClassifyDscpInternalPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Internal Priority value which is assigned to frames whose DSCP value is 'provQosPortClassifyPortDscpPriority'." ::= { provQosPortClassifyDscpEntry 5 } provQosVlanClassifyDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosVlanClassifyDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Default internal priority for VLAN base QoS mode." ::= { provQosGroup 11 } provQosVlanClassifyDefaultEntry OBJECT-TYPE SYNTAX ProvQosVlanClassifyDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosVlanClassifyDefaultIndex } ::= { provQosVlanClassifyDefaultTable 1 } ProvQosVlanClassifyDefaultEntry ::= SEQUENCE { provQosVlanClassifyDefaultIndex Integer32, provQosVlanClassifyDefaultNEAddress IpAddress, provQosVlanClassifyDefaultPriority Integer32 } provQosVlanClassifyDefaultIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosVlanClassifyDefaultEntry 1 } provQosVlanClassifyDefaultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosVlanClassifyDefaultEntry 2 } provQosVlanClassifyDefaultPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Internal priority which is assigned to the untag frames. Note) tagged frames whose VLAN ID is not configured in 'provVlanClassifyTable' are assigned based on its Cos value." DEFVAL { 0 } ::= { provQosVlanClassifyDefaultEntry 3 } provQosVlanClassifyTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvQosVlanClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the mapping of VLAN ID to Internal priority. This configuration is applicable only when the system is running on VLAN base QoS mode." ::= { provQosGroup 12 } provQosVlanClassifyEntry OBJECT-TYPE SYNTAX ProvQosVlanClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provQosVlanClassifyProfileIndex, provQosVlanClassifyEntryIndex } ::= { provQosVlanClassifyTable 1 } ProvQosVlanClassifyEntry ::= SEQUENCE { provQosVlanClassifyProfileIndex Integer32, provQosVlanClassifyEntryIndex Integer32, provQosVlanClassifyNEAddress IpAddress, provQosVlanClassifyVlanIndex IpeVlanIndex, provQosVlanClassifyInternalPriority Integer32, provQosVlanClassifyRowStatus RowStatus } provQosVlanClassifyProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosVlanClassifyEntry 1 } provQosVlanClassifyEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provQosVlanClassifyEntry 2 } provQosVlanClassifyNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provQosVlanClassifyEntry 3 } provQosVlanClassifyVlanIndex OBJECT-TYPE SYNTAX IpeVlanIndex MAX-ACCESS read-create STATUS current DESCRIPTION "this object configures the VLAN ID for VLAN ID to internal priority mapping." ::= { provQosVlanClassifyEntry 4 } provQosVlanClassifyInternalPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Internal priority which is assigned to the frames whose VLAN ID is 'provQosVlanClassifyEntryIndex'." ::= { provQosVlanClassifyEntry 5 } provQosVlanClassifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for create a new row or delete an existing row." ::= { provQosVlanClassifyEntry 6 } provRstpGroup OBJECT IDENTIFIER ::= { provisioningGroup 23 } provRstpExtBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvRstpExtBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provRstpGroup 1 } provRstpExtBridgeEntry OBJECT-TYPE SYNTAX ProvRstpExtBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provRstpExtBridgeIndex } ::= { provRstpExtBridgeTable 1 } ProvRstpExtBridgeEntry ::= SEQUENCE { provRstpExtBridgeIndex Integer32, provRstpExtBridgeNEAddress IpAddress, provRstpExtBridgeEnable EnableDisableValue, provRstpExtBridgeRstpMstpVersion INTEGER, provRstpExtBridgeMaxAge Integer32, provRstpExtBridgeHelloTime Integer32, provRstpExtBridgeForwardDelay Integer32, provRstpExtBridgePriority Integer32, provRstpExtBridgeTxHoldCount Integer32 } provRstpExtBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provRstpExtBridgeEntry 1 } provRstpExtBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provRstpExtBridgeEntry 2 } provRstpExtBridgeEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "RSTP enable/disable" ::= { provRstpExtBridgeEntry 3 } provRstpExtBridgeRstpMstpVersion OBJECT-TYPE SYNTAX INTEGER { rstp(1), mstp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "STP Mode" ::= { provRstpExtBridgeEntry 4 } provRstpExtBridgeMaxAge OBJECT-TYPE SYNTAX Integer32 (6..40) MAX-ACCESS read-write STATUS current DESCRIPTION "Max Age Timer" ::= { provRstpExtBridgeEntry 5 } provRstpExtBridgeHelloTime OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Hello Timer" ::= { provRstpExtBridgeEntry 6 } provRstpExtBridgeForwardDelay OBJECT-TYPE SYNTAX Integer32 (4..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Forwarding Delay Timer" ::= { provRstpExtBridgeEntry 7 } provRstpExtBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION "Bridgw Priority" ::= { provRstpExtBridgeEntry 8 } provRstpExtBridgeTxHoldCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "STP TX Hold Count (RSTP)" ::= { provRstpExtBridgeEntry 9 } provRstpExtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvRstpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provRstpGroup 2 } provRstpExtPortEntry OBJECT-TYPE SYNTAX ProvRstpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provRstpExtPortifIndex } ::= { provRstpExtPortTable 1 } ProvRstpExtPortEntry ::= SEQUENCE { provRstpExtPortifIndex InterfaceIndex, provRstpExtPortNEAddress IpAddress, provRstpExtPortPriority Integer32, provRstpExtPortEnable EnableDisableValue, provRstpExtPortAdminEdgePort EnableDisableValue, provRstpExtPortAdminPointToPoint INTEGER, provRstpExtPortAdminPathCost Integer32 } provRstpExtPortifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provRstpExtPortEntry 1 } provRstpExtPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provRstpExtPortEntry 2 } provRstpExtPortPriority OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION "STP Port Priority (RSTP)" ::= { provRstpExtPortEntry 3 } provRstpExtPortEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "RSTP Enable" ::= { provRstpExtPortEntry 4 } provRstpExtPortAdminEdgePort OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Edge Port (RSTP)" ::= { provRstpExtPortEntry 5 } provRstpExtPortAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PtoP Port (RSTP)" ::= { provRstpExtPortEntry 6 } provRstpExtPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "STP Port Path Cost (RSTP)" ::= { provRstpExtPortEntry 7 } provEthOamGroup OBJECT IDENTIFIER ::= { provisioningGroup 24 } provEthOamMegTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamMegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Meg Setting Table" ::= { provEthOamGroup 1 } provEthOamMegEntry OBJECT-TYPE SYNTAX ProvEthOamMegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamMegIndex } ::= { provEthOamMegTable 1 } ProvEthOamMegEntry ::= SEQUENCE { provEthOamMegIndex IpeMepId, provEthOamMegNEAddress IpAddress, provEthOamMegID OCTET STRING, provEthOamMegLevel INTEGER, provEthOamMegPeriod INTEGER, provEthOamMegRowStatus RowStatus, provEthOamMegShortID OCTET STRING, provEthOamMegCcmEnabled EnableDisableValue, provEthOamMegCcmPriority Integer32 } provEthOamMegIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMegEntry 1 } provEthOamMegNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamMegEntry 2 } provEthOamMegID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..43)) MAX-ACCESS read-create STATUS current DESCRIPTION "Meg ID(0-43 Octet String)" ::= { provEthOamMegEntry 3 } provEthOamMegLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Meg Level(0-7)" ::= { provEthOamMegEntry 4 } provEthOamMegPeriod OBJECT-TYPE SYNTAX INTEGER { invalid(0), period-3ms(1), period-10ms(2), period-100ms(3), period-1s(4), period-10s(5), period-1min(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "CCM Frame Transmit Period(1-6)" ::= { provEthOamMegEntry 5 } provEthOamMegRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Entry Status" ::= { provEthOamMegEntry 6 } provEthOamMegShortID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..43)) MAX-ACCESS read-create STATUS current DESCRIPTION "Short Meg ID(0-43 Octet String)" ::= { provEthOamMegEntry 7 } provEthOamMegCcmEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS current DESCRIPTION "CCM Transmit/Receive Setting" ::= { provEthOamMegEntry 8 } provEthOamMegCcmPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "CCM Frame Priority" ::= { provEthOamMegEntry 9 } provEthOamMipTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mip Setting Table" ::= { provEthOamGroup 2 } provEthOamMipEntry OBJECT-TYPE SYNTAX ProvEthOamMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamMipIndex, provEthOamMipIfIndex, provEthOamMipVld, provEthOamMipMegLevel } ::= { provEthOamMipTable 1 } ProvEthOamMipEntry ::= SEQUENCE { provEthOamMipIndex Integer32, provEthOamMipIfIndex InterfaceIndex, provEthOamMipVld Integer32, provEthOamMipMegLevel INTEGER, provEthOamMipNEAddress IpAddress, provEthOamMipRowStatus RowStatus } provEthOamMipIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMipEntry 1 } provEthOamMipIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMipEntry 2 } provEthOamMipVld OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan Id(1-4094, Untag=0)" ::= { provEthOamMipEntry 3 } provEthOamMipMegLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Meg Level(0-7)" ::= { provEthOamMipEntry 4 } provEthOamMipNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamMipEntry 5 } provEthOamMipRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Entry Status" ::= { provEthOamMipEntry 6 } provEthOamMepTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mep Setting Table" ::= { provEthOamGroup 3 } provEthOamMepEntry OBJECT-TYPE SYNTAX ProvEthOamMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamMepIndex } ::= { provEthOamMepTable 1 } ProvEthOamMepEntry ::= SEQUENCE { provEthOamMepIndex IpeMepId, provEthOamMepNEAddress IpAddress, provEthOamMepIfIndex InterfaceIndex, provEthOamMepVld Integer32, provEthOamMepMegIndex IpeMepId, provEthOamMepDirection INTEGER, provEthOamMepId Integer32, provEthOamMepCcmTransmitEnabled EnableDisableValue, provEthOamMepCcmReceiveEnabled EnableDisableValue, provEthOamMepCcmPriority Integer32, provEthOamMepAisTransmitEnabled EnableDisableValue, provEthOamMepAisReceiveEnabled EnableDisableValue, provEthOamMepAisPeriod INTEGER, provEthOamMepAisMegIndex IpeMepId, provEthOamMepAisPriority Integer32, provEthOamMepRowStatus RowStatus } provEthOamMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMepEntry 1 } provEthOamMepNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamMepEntry 2 } provEthOamMepIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Ifindex" ::= { provEthOamMepEntry 3 } provEthOamMepVld OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Vlan Id(1-4094, Untag=0)" ::= { provEthOamMepEntry 4 } provEthOamMepMegIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-create STATUS current DESCRIPTION "Meg Index(1-128)" ::= { provEthOamMepEntry 5 } provEthOamMepDirection OBJECT-TYPE SYNTAX INTEGER { inside(0), outside(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Mep Direction. range: outside(iPASOLINK200/400/1000series/EX/iX), outside,inside(iPASOLINK VR series)" DEFVAL { outside } ::= { provEthOamMepEntry 6 } provEthOamMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Mep Id(1-8191)" ::= { provEthOamMepEntry 7 } provEthOamMepCcmTransmitEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "CCM Transmit Setting" ::= { provEthOamMepEntry 8 } provEthOamMepCcmReceiveEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "CCM Receive Setting" ::= { provEthOamMepEntry 9 } provEthOamMepCcmPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "CCM Frame Priority" ::= { provEthOamMepEntry 10 } provEthOamMepAisTransmitEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "ETH-AIS Transmit Setting" ::= { provEthOamMepEntry 11 } provEthOamMepAisReceiveEnabled OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "ETH-AIS Receive Setting" ::= { provEthOamMepEntry 12 } provEthOamMepAisPeriod OBJECT-TYPE SYNTAX INTEGER { invalid(0), period-1s(4), period-1min(6) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "ETH-AIS Frame Transmit Period" ::= { provEthOamMepEntry 13 } provEthOamMepAisMegIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-create STATUS obsolete DESCRIPTION "ETH-AIS Frame Transmit MEG" ::= { provEthOamMepEntry 14 } provEthOamMepAisPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "ETH-AIS Frame Priority" ::= { provEthOamMepEntry 15 } provEthOamMepRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Entry Status" ::= { provEthOamMepEntry 16 } provEthOamPeerListTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamPeerListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer Mep Setting Table" ::= { provEthOamGroup 4 } provEthOamPeerListEntry OBJECT-TYPE SYNTAX ProvEthOamPeerListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamPeerListIndex } ::= { provEthOamPeerListTable 1 } ProvEthOamPeerListEntry ::= SEQUENCE { provEthOamPeerListIndex IpeMepId, provEthOamPeerListNEAddress IpAddress, provEthOamPeerListMepIndex IpeMepId, provEthOamPeerListPeerMepId Integer32, provEthOamPeerListCheckStatusEnable EnableDisableValue, provEthOamPeerListRowStatus RowStatus } provEthOamPeerListIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamPeerListEntry 1 } provEthOamPeerListNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamPeerListEntry 2 } provEthOamPeerListMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-create STATUS current DESCRIPTION "Own Mep Index(1-128)" ::= { provEthOamPeerListEntry 3 } provEthOamPeerListPeerMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Mep Id(1-8191)" ::= { provEthOamPeerListEntry 4 } provEthOamPeerListCheckStatusEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Peer Mep CCM Receive setting" ::= { provEthOamPeerListEntry 5 } provEthOamPeerListRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Entry Status" ::= { provEthOamPeerListEntry 6 } provEthOamMipMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamMipMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MIP Mapping Table" ::= { provEthOamGroup 5 } provEthOamMipMappingEntry OBJECT-TYPE SYNTAX ProvEthOamMipMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamMipMappingIfIndex, provEthOamMipMappingVld, provEthOamMipMappingMegLevel } ::= { provEthOamMipMappingTable 1 } ProvEthOamMipMappingEntry ::= SEQUENCE { provEthOamMipMappingIfIndex InterfaceIndex, provEthOamMipMappingVld Integer32, provEthOamMipMappingMegLevel INTEGER, provEthOamMipMappingNEAddress IpAddress, provEthOamMipMappingMipIndex Integer32 } provEthOamMipMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMipMappingEntry 1 } provEthOamMipMappingVld OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan Id(1-4094, Untag=0)" ::= { provEthOamMipMappingEntry 2 } provEthOamMipMappingMegLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Meg Level(0-7)" ::= { provEthOamMipMappingEntry 3 } provEthOamMipMappingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamMipMappingEntry 4 } provEthOamMipMappingMipIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Mip Index(1-32)" ::= { provEthOamMipMappingEntry 5 } provEthOamMepMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvEthOamMepMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEP Mapping Table" ::= { provEthOamGroup 6 } provEthOamMepMappingEntry OBJECT-TYPE SYNTAX ProvEthOamMepMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provEthOamMepMappingIfIndex, provEthOamMepMappingVld, provEthOamMepMappingMegIndex } ::= { provEthOamMepMappingTable 1 } ProvEthOamMepMappingEntry ::= SEQUENCE { provEthOamMepMappingIfIndex InterfaceIndex, provEthOamMepMappingVld Integer32, provEthOamMepMappingMegIndex IpeMepId, provEthOamMepMappingNEAddress IpAddress, provEthOamMepMappingMepIndex IpeMepId } provEthOamMepMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMepMappingEntry 1 } provEthOamMepMappingVld OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan Id(1-4094, Untag=0)" ::= { provEthOamMepMappingEntry 2 } provEthOamMepMappingMegIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provEthOamMepMappingEntry 3 } provEthOamMepMappingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provEthOamMepMappingEntry 4 } provEthOamMepMappingMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Index(1-128)" ::= { provEthOamMepMappingEntry 5 } provFdbGroup OBJECT IDENTIFIER ::= { provisioningGroup 27 } provFdbEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFdbEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the equipment level configuration for FDB learning behaviours." ::= { provFdbGroup 1 } provFdbEquipmentEntry OBJECT-TYPE SYNTAX ProvFdbEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFdbEquipmentIndex } ::= { provFdbEquipmentTable 1 } ProvFdbEquipmentEntry ::= SEQUENCE { provFdbEquipmentIndex Integer32, provFdbEquipmentNEAddress IpAddress, provFdbEquipmentNumberOfLearningEntry Integer32, provFdbEquipmentLearningLimitEnable EnableDisableValue, provFdbEquipmentAgingTime Integer32, provFdbEquipmentAgingEnable EnableDisableValue, provFdbEquipmentLearningLimitMode INTEGER } provFdbEquipmentIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFdbEquipmentEntry 1 } provFdbEquipmentNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provFdbEquipmentEntry 2 } provFdbEquipmentNumberOfLearningEntry OBJECT-TYPE SYNTAX Integer32 (1..32384) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of maximum learning entries." ::= { provFdbEquipmentEntry 3 } provFdbEquipmentLearningLimitEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling notification for learning limit over." ::= { provFdbEquipmentEntry 4 } provFdbEquipmentAgingTime OBJECT-TYPE SYNTAX Integer32 (5..163680) MAX-ACCESS read-write STATUS current DESCRIPTION "The aging time. When the aging time for the destination address is expired, the entry will be cleared." ::= { provFdbEquipmentEntry 5 } provFdbEquipmentAgingEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling FDB Aging. When the object is set to 'disable', the aging function is disabled, and the learned entries are never aged-out. Rebooting agent or FDB clearing request can clear all entries." ::= { provFdbEquipmentEntry 6 } provFdbEquipmentLearningLimitMode OBJECT-TYPE SYNTAX INTEGER { normal(1), protect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Learning limit mode. On 'normal' mode, when the learned entries exceed the value of provFdbEquipmentNumberOfLearningEntry, the exceeded entries are not learned and unknown frames are flooded to all ports. On 'protect' mode, the unknown frames are discarded when the learning entries are full." ::= { provFdbEquipmentEntry 7 } provFdbVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFdbVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "this table contains the vlan level configurations." ::= { provFdbGroup 2 } provFdbVlanEntry OBJECT-TYPE SYNTAX ProvFdbVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFdbVlanIndex } ::= { provFdbVlanTable 1 } ProvFdbVlanEntry ::= SEQUENCE { provFdbVlanIndex Integer32, provFdbVlanNEAddress IpAddress, provFdbVlanNumberOfLearningEntry Integer32, provFdbVlanLearningLimitMode INTEGER, provFdbVlanLearningLimitModeEnable EnableDisableValue } provFdbVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFdbVlanEntry 1 } provFdbVlanNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provFdbVlanEntry 2 } provFdbVlanNumberOfLearningEntry OBJECT-TYPE SYNTAX Integer32 (1..32384) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of maximum learning entries per VLAN." ::= { provFdbVlanEntry 3 } provFdbVlanLearningLimitMode OBJECT-TYPE SYNTAX INTEGER { normal(1), protect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Learning limit mode. On 'normal' mode, when the learned entries exceed the value of provFdbEquipmentNumberOfLearningEntry, the exceeded entries are not learned and unknown frames are flooded to all ports. On 'protect' mode, the unknown frames are discarded when the learning entries are full." ::= { provFdbVlanEntry 4 } provFdbVlanLearningLimitModeEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling the learning limitation per VLAN. When the value is set to 'disable', the available learning entries for that VLAN are up to the amount of system entries, and the limit mode is configured to the 'normal' mode. Note) if the other limitation (per system or per port) is enabled, the learning limitation is performed by the configuration." ::= { provFdbVlanEntry 5 } provFdbStaticEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFdbStaticEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFdbGroup 3 } provFdbStaticEntryEntry OBJECT-TYPE SYNTAX ProvFdbStaticEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFdbStaticEntryIndex, provFdbStaticVlanId, provFdbStaticPortIfIndex } ::= { provFdbStaticEntryTable 1 } ProvFdbStaticEntryEntry ::= SEQUENCE { provFdbStaticEntryIndex Integer32, provFdbStaticVlanId Integer32, provFdbStaticPortIfIndex InterfaceIndex, provFdbStaticNEAddress IpAddress, provFdbStaticMacAddress MacAddress, provFdbStaticRowStatus RowStatus } provFdbStaticEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFdbStaticEntryEntry 1 } provFdbStaticVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID Value Range : 1-4094 FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFdbStaticEntryEntry 2 } provFdbStaticPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFdbStaticEntryEntry 3 } provFdbStaticNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provFdbStaticEntryEntry 4 } provFdbStaticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MAC Address Valude Range : 00:00:00:00:00:00-FF:FF:FF:FF:FF:FF FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFdbStaticEntryEntry 5 } provFdbStaticRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFdbStaticEntryEntry 6 } provFdbPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFdbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "this table contains the port level configurations." ::= { provFdbGroup 4 } provFdbPortEntry OBJECT-TYPE SYNTAX ProvFdbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFdbPortIfIndex } ::= { provFdbPortTable 1 } ProvFdbPortEntry ::= SEQUENCE { provFdbPortIfIndex InterfaceIndex, provFdbPortNEAddress IpAddress, provFdbPortLearningLimit Integer32, provFdbPortLimitMode INTEGER, provFdbPortLimitEnable EnableDisableValue } provFdbPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFdbPortEntry 1 } provFdbPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { provFdbPortEntry 2 } provFdbPortLearningLimit OBJECT-TYPE SYNTAX Integer32 (1..32384) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of maximum learning entries per port." DEFVAL { 32384 } ::= { provFdbPortEntry 3 } provFdbPortLimitMode OBJECT-TYPE SYNTAX INTEGER { normal(1), protect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Learning limit mode. On 'normal' mode, when the learned entries exceed the value of provFdbEquipmentNumberOfLearningEntry, the exceeded entries are not learned and unknown frames are flooded to all ports. On 'protect' mode, the unknown frames are discarded when the learning entries are full." DEFVAL { protect } ::= { provFdbPortEntry 4 } provFdbPortLimitEnable OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling the learning limitation per port. When the value is set to 'disable', the available learning entries for that port are up to the amount of system entries, and the limit mode is configured to the 'normal' mode. Note) if the other limitation (per system or per VLAN) is enabled, the learning limitation is performed by the configuration." DEFVAL { disable } ::= { provFdbPortEntry 5 } provLlfGroup OBJECT IDENTIFIER ::= { provisioningGroup 28 } provLlfGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvLlfGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provLlfGroup 1 } provLlfGroupEntry OBJECT-TYPE SYNTAX ProvLlfGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provLlfGroupIndex, provLlfGroupIfIndex } ::= { provLlfGroupTable 1 } ProvLlfGroupEntry ::= SEQUENCE { provLlfGroupIndex Integer32, provLlfGroupIfIndex InterfaceIndex, provLlfGroupNEAddress IpAddress, provLlfGroupPortEnable INTEGER, provLlfGroupRowStatus RowStatus } provLlfGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provLlfGroupEntry 1 } provLlfGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provLlfGroupEntry 2 } provLlfGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provLlfGroupEntry 3 } provLlfGroupPortEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "LLF Group Enable FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provLlfGroupEntry 4 } provLlfGroupRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus 1. active 4. createAndGo 6. destroy FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provLlfGroupEntry 5 } provLlfPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvLlfPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provLlfGroup 2 } provLlfPortEntry OBJECT-TYPE SYNTAX ProvLlfPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provLlfPortIfIndex } ::= { provLlfPortTable 1 } ProvLlfPortEntry ::= SEQUENCE { provLlfPortIfIndex InterfaceIndex, provLlfPortNEAddress IpAddress, provLlfPortMode INTEGER, provLlfPortInfoForwarding INTEGER } provLlfPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provLlfPortEntry 1 } provLlfPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provLlfPortEntry 2 } provLlfPortMode OBJECT-TYPE SYNTAX INTEGER { trunk(1), edgeShutdown(2), edgeOamSend(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "LLF Port Mode. 'trunk' means the port is connected to the peer, 'trunk' port only transfers the LLF request messages, the port status will not be changed by LLF. 'edgeShutdown' and 'edegOamSend' means the port will be act as edge port of LLF group. The port which is configured as 'edgeShutdown' will be closed when the LLF control is activated, on the other hand, the 'edgeOamSend' port will send the OAM messages when the LLF control is activated. The modem port cannot be configured as 'edgeShutdown' or 'edgeOamSend', can be configured as 'trunk'. And default value depends on the port type. The default value of the modem port is 'trunk', and that of the other port is 'edgeShutdown'." ::= { provLlfPortEntry 3 } provLlfPortInfoForwarding OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LLF Info Fowarding Enable Default : enable FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provLlfPortEntry 4 } provLlfGroupIgnoreTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvLlfGroupIgnoreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provLlfGroup 3 } provLlfGroupIgnoreEntry OBJECT-TYPE SYNTAX ProvLlfGroupIgnoreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provLlfGroupIgnoreIndex } ::= { provLlfGroupIgnoreTable 1 } ProvLlfGroupIgnoreEntry ::= SEQUENCE { provLlfGroupIgnoreIndex Integer32, provLlfGroupIgnoreNEAddress IpAddress, provLlfGroupIgnoreEnable INTEGER } provLlfGroupIgnoreIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provLlfGroupIgnoreEntry 1 } provLlfGroupIgnoreNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provLlfGroupIgnoreEntry 2 } provLlfGroupIgnoreEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LLF Info Ignore Enable Default : disable FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provLlfGroupIgnoreEntry 3 } provFilterGroup OBJECT IDENTIFIER ::= { provisioningGroup 29 } provFilterProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFilterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFilterGroup 1 } provFilterProfileEntry OBJECT-TYPE SYNTAX ProvFilterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFilterProfileIndex } ::= { provFilterProfileTable 1 } ProvFilterProfileEntry ::= SEQUENCE { provFilterProfileIndex Integer32, provFilterProfileNEAddress IpAddress, provFilterEntryIndex1 Integer32, provFilterEntryIndex2 Integer32, provFilterEntryIndex3 Integer32, provFilterEntryIndex4 Integer32, provFilterEntryIndex5 Integer32, provFilterEntryIndex6 Integer32, provFilterEntryIndex7 Integer32, provFilterEntryIndex8 Integer32, provFilterEntryIndex9 Integer32, provFilterEntryIndex10 Integer32, provFilterProfileName DisplayString, provFilterRowStatus RowStatus } provFilterProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFilterProfileEntry 1 } provFilterProfileNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provFilterProfileEntry 2 } provFilterEntryIndex1 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 3 } provFilterEntryIndex2 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 4 } provFilterEntryIndex3 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 5 } provFilterEntryIndex4 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 6 } provFilterEntryIndex5 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 7 } provFilterEntryIndex6 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 8 } provFilterEntryIndex7 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 9 } provFilterEntryIndex8 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 10 } provFilterEntryIndex9 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 11 } provFilterEntryIndex10 OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry from the profile, set 0 to the object." DEFVAL { 0 } ::= { provFilterProfileEntry 12 } provFilterProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative Name for the Filter Profile" ::= { provFilterProfileEntry 68 } provFilterRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this table. This object controls create and delete filter profile." ::= { provFilterProfileEntry 69 } provFilterEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFilterEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFilterGroup 2 } provFilterEntryEntry OBJECT-TYPE SYNTAX ProvFilterEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFilterEntryIndex } ::= { provFilterEntryTable 1 } ProvFilterEntryEntry ::= SEQUENCE { provFilterEntryIndex Integer32, provFilterEntryNEAddress IpAddress, provFilterEntryMode INTEGER, provFilterEntryTarget INTEGER, provFilterEntryDestMac MacAddress, provFilterEntryDestMacMask MacAddress, provFilterEntrySrcMac MacAddress, provFilterEntrySrcMacMask MacAddress, provFilterEntryEthertype OCTET STRING, provFilterEntryEthertypeMask OCTET STRING, provFilterEntryCos OCTET STRING, provFilterEntryCosMask OCTET STRING, provFilterEntryVlan Integer32, provFilterEntryVlanMask Integer32, provFilterEntryRowStatus RowStatus } provFilterEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFilterEntryEntry 1 } provFilterEntryNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterEntryEntry 2 } provFilterEntryMode OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Filter entry action:deny(1), permit(2) default:deny(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { deny } ::= { provFilterEntryEntry 3 } provFilterEntryTarget OBJECT-TYPE SYNTAX INTEGER { invalid(0), l2filter(1) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Filter Type:L2(1), L3(2) default:L2(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { l2filter } ::= { provFilterEntryEntry 4 } provFilterEntryDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '000000000000'h } ::= { provFilterEntryEntry 5 } provFilterEntryDestMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC Address mask value FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '000000000000'h } ::= { provFilterEntryEntry 6 } provFilterEntrySrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '000000000000'h } ::= { provFilterEntryEntry 7 } provFilterEntrySrcMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC Address mask value FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '000000000000'h } ::= { provFilterEntryEntry 8 } provFilterEntryEthertype OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2..2)) MAX-ACCESS read-create STATUS current DESCRIPTION "EthetType FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '0000'h } ::= { provFilterEntryEntry 9 } provFilterEntryEthertypeMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2..2)) MAX-ACCESS read-create STATUS current DESCRIPTION "EthetType mask value FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '0000'h } ::= { provFilterEntryEntry 10 } provFilterEntryCos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1)) MAX-ACCESS read-create STATUS current DESCRIPTION "CoS FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '00'h } ::= { provFilterEntryEntry 11 } provFilterEntryCosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1)) MAX-ACCESS read-create STATUS current DESCRIPTION "CoS mask value FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { '00'h } ::= { provFilterEntryEntry 12 } provFilterEntryVlan OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN-ID FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { 1 } ::= { provFilterEntryEntry 13 } provFilterEntryVlanMask OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN-ID mask value FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" DEFVAL { 0 } ::= { provFilterEntryEntry 14 } provFilterEntryRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus 1. active 4. createAndGo 6. destroy FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterEntryEntry 53 } provFilterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFilterGroup 3 } provFilterPortEntry OBJECT-TYPE SYNTAX ProvFilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFilterPortIndex } ::= { provFilterPortTable 1 } ProvFilterPortEntry ::= SEQUENCE { provFilterPortIndex Integer32, provFilterPortNEAddress IpAddress, provFilterIngressProfile Integer32, provFilterEgressProfile Integer32 } provFilterPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFilterPortEntry 1 } provFilterPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { provFilterPortEntry 2 } provFilterIngressProfile OBJECT-TYPE SYNTAX Integer32 (0..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress Filter Profile Number. To assign the filter profile to this port, set the appropriate filter profile index to this object. To unassign the filter profile from this port, set 0. For iPASOLINK VR series, this object can be set to non-zero value up to 16 ports in total." DEFVAL { 0 } ::= { provFilterPortEntry 3 } provFilterEgressProfile OBJECT-TYPE SYNTAX Integer32 (0..64) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Egress Filter Profile Number. To assign the filter profile to this port, set the appropriate filter profile index to this object. To unassign the filter profile from this port, set 0. For iPASOLINK VR series, this object can be set to non-zero value up to 16 ports in total." DEFVAL { 0 } ::= { provFilterPortEntry 4 } provFilterL2ProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvFilterL2ProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFilterGroup 4 } provFilterL2ProtoEntry OBJECT-TYPE SYNTAX ProvFilterL2ProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provFilterL2ProtoIfIndex } ::= { provFilterL2ProtoTable 1 } ProvFilterL2ProtoEntry ::= SEQUENCE { provFilterL2ProtoIfIndex InterfaceIndex, provFilterL2ProtoNEAddress IpAddress, provFilterL2ProtoBpduAction INTEGER, provFilterL2ProtoLacpAction INTEGER, provFilterL2ProtoPortAutheAction INTEGER, provFilterL2ProtoPBAction INTEGER, provFilterL2ProtoLldpAction INTEGER, provFilterL2ProtoOtherMacAction INTEGER, provFilterL2ProtoGarpAction INTEGER } provFilterL2ProtoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provFilterL2ProtoEntry 1 } provFilterL2ProtoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 2 } provFilterL2ProtoBpduAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(BPDU) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 3 } provFilterL2ProtoLacpAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(LACP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 4 } provFilterL2ProtoPortAutheAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(Port Authe) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 5 } provFilterL2ProtoPBAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(PB) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 6 } provFilterL2ProtoLldpAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(LLDP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 7 } provFilterL2ProtoOtherMacAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(Other Mac) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 8 } provFilterL2ProtoGarpAction OBJECT-TYPE SYNTAX INTEGER { discard(1), transparent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2 Protocol Fream(GARP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provFilterL2ProtoEntry 9 } provETHPortFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvETHPortFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provFilterGroup 5 } provETHPortFwdEntry OBJECT-TYPE SYNTAX ProvETHPortFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provETHPortFwdIfIndex } ::= { provETHPortFwdTable 1 } ProvETHPortFwdEntry ::= SEQUENCE { provETHPortFwdIfIndex InterfaceIndex, provETHPortFwdNEAddress IpAddress, provETHPortFwdIsolation EnableDisableValue } provETHPortFwdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provETHPortFwdEntry 1 } provETHPortFwdNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { provETHPortFwdEntry 2 } provETHPortFwdIsolation OBJECT-TYPE SYNTAX EnableDisableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Port Isolate" ::= { provETHPortFwdEntry 3 } provETHPortSetGroup OBJECT IDENTIFIER ::= { provisioningGroup 30 } provETHPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provETHPortSetGroup 1 } provETHPortEntry OBJECT-TYPE SYNTAX ProvETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provETHIfIndex } ::= { provETHPortTable 1 } ProvETHPortEntry ::= SEQUENCE { provETHIfIndex InterfaceIndex, provETHPortNEAddress IpAddress, provETHPortInterfaceType INTEGER, provETHPortSpeed INTEGER, provETHPortDuplex INTEGER, provETHPortFlowControl INTEGER, provETHPortMDIMDIX INTEGER, provETHPortPortClose INTEGER, provETHPortMirroring INTEGER, provETHPortDirection INTEGER, provETHPortName DisplayString } provETHIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provETHPortEntry 1 } provETHPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provETHPortEntry 2 } provETHPortInterfaceType OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SFP type:fiber(1),copper(2) default:fiber(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 3 } provETHPortSpeed OBJECT-TYPE SYNTAX INTEGER { autonego(1), s10M(2), s100M(3), s1000M(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to autonego will cause the interface which has the auto-negotiation signalling ability to be enabled. The other values represent the administratively-configured speed of the Medium." ::= { provETHPortEntry 4 } provETHPortDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the administratively-configured operation-mode of the Medium when auto-negotiation is disable." ::= { provETHPortEntry 5 } provETHPortFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flowcontrol setting:disable(1),enable(2) default:enable(2) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 6 } provETHPortMDIMDIX OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdi-x(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "MDI setting:mdi(1),mdi-x(2) default:mdi(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 7 } provETHPortPortClose OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the interface." ::= { provETHPortEntry 8 } provETHPortMirroring OBJECT-TYPE SYNTAX INTEGER { none(1), monitoring(2), mirror(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mirror port type:none(1),mirroring(2),mirror(3) default:none(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 9 } provETHPortDirection OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mirror fream direction:ingress(1),egress(2),both(3) default:ingress(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 10 } provETHPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Name(0-32 characters) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortEntry 11 } provETHPortMtuTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvETHPortMtuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provETHPortSetGroup 2 } provETHPortMtuEntry OBJECT-TYPE SYNTAX ProvETHPortMtuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provETHPortMtuIndex } ::= { provETHPortMtuTable 1 } ProvETHPortMtuEntry ::= SEQUENCE { provETHPortMtuIndex Integer32, provETHPortMtuNEAddress IpAddress, provETHPortMtuFeMaxFrameSize Integer32, provETHPortMtuGbeMaxFrameSize Integer32 } provETHPortMtuIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provETHPortMtuEntry 1 } provETHPortMtuNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortMtuEntry 2 } provETHPortMtuFeMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (64..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "FE Port MTU size FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortMtuEntry 3 } provETHPortMtuGbeMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "GbE/XGbE Port MTU size FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provETHPortMtuEntry 4 } provSyncETHSetGroup OBJECT IDENTIFIER ::= { provisioningGroup 31 } provSyncETHTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSyncETHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provSyncETHSetGroup 1 } provSyncETHEntry OBJECT-TYPE SYNTAX ProvSyncETHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSyncETHIndex } ::= { provSyncETHTable 1 } ProvSyncETHEntry ::= SEQUENCE { provSyncETHIndex Integer32, provSyncETHNEAddress IpAddress, provSyncETHEnable INTEGER } provSyncETHIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSyncETHEntry 1 } provSyncETHNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provSyncETHEntry 2 } provSyncETHEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SyncEther setting:disable(1),enable(2) default:disable(1) FLAG=TRAP|EVLOG LOGITEM='%s' LOGSTATUS='%s'" ::= { provSyncETHEntry 3 } provSyncETHPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvSyncETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provSyncETHSetGroup 2 } provSyncETHPortEntry OBJECT-TYPE SYNTAX ProvSyncETHPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provSyncETHPortIfIndex } ::= { provSyncETHPortTable 1 } ProvSyncETHPortEntry ::= SEQUENCE { provSyncETHPortIfIndex InterfaceIndex, provSyncETHPortNEAddress IpAddress, provSyncETHPortEnable INTEGER } provSyncETHPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provSyncETHPortEntry 1 } provSyncETHPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provSyncETHPortEntry 2 } provSyncETHPortEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), enable(2), enableMaster(3), enableSlave(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sync ETHER Enable" DEFVAL { disable } ::= { provSyncETHPortEntry 3 } provETHCardGroup OBJECT IDENTIFIER ::= { provisioningGroup 32 } provETHCardSetTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvETHCardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provETHCardGroup 1 } provETHCardSetEntry OBJECT-TYPE SYNTAX ProvETHCardSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provETHCardSetIndex } ::= { provETHCardSetTable 1 } ProvETHCardSetEntry ::= SEQUENCE { provETHCardSetIndex Integer32, provETHCardSetNEAddress IpAddress, ethCardLineClkSelect Integer32 } provETHCardSetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provETHCardSetEntry 1 } provETHCardSetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provETHCardSetEntry 2 } ethCardLineClkSelect OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Clock Select" ::= { provETHCardSetEntry 3 } provProtectionGroup OBJECT IDENTIFIER ::= { provisioningGroup 33 } provStm1ApsTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provProtectionGroup 1 } provStm1ApsEntry OBJECT-TYPE SYNTAX ProvStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provStm1ApsIfIndex } ::= { provStm1ApsTable 1 } ProvStm1ApsEntry ::= SEQUENCE { provStm1ApsIfIndex InterfaceIndex, provStm1ApsNEAddress IpAddress, apsLockinSetting UsedNotusedValue, apsDetectionTime Integer32, apsDetectionCount Integer32, apsClearLockinTime Integer32 } provStm1ApsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provStm1ApsEntry 1 } provStm1ApsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provStm1ApsEntry 2 } apsLockinSetting OBJECT-TYPE SYNTAX UsedNotusedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Lock-in Usage" ::= { provStm1ApsEntry 3 } apsDetectionTime OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Detection Time" ::= { provStm1ApsEntry 4 } apsDetectionCount OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Detection Count" ::= { provStm1ApsEntry 5 } apsClearLockinTime OBJECT-TYPE SYNTAX Integer32 (1..288) UNITS "10 minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Clear Lock-in Timer" ::= { provStm1ApsEntry 6 } provCtrlGroup OBJECT IDENTIFIER ::= { provisioningGroup 34 } provCtrlExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvCtrlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { provCtrlGroup 1 } provCtrlExtEntry OBJECT-TYPE SYNTAX ProvCtrlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provCtrlExtIndex } ::= { provCtrlExtTable 1 } ProvCtrlExtEntry ::= SEQUENCE { provCtrlExtIndex Integer32, provCtrlExtNEAddress IpAddress, provCtrlExtOverTempAlarmRaise Integer32, provCtrlExtOverTempAlarmClear Integer32, provCtrlExtUnderTempAlarmRaise Integer32, provCtrlExtUnderTempAlarmClear Integer32 } provCtrlExtIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provCtrlExtEntry 1 } provCtrlExtNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provCtrlExtEntry 2 } provCtrlExtOverTempAlarmRaise OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 degree" MAX-ACCESS read-write STATUS current DESCRIPTION "Upper Limit Over Temperature of Alarm Raise" ::= { provCtrlExtEntry 3 } provCtrlExtOverTempAlarmClear OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 degree" MAX-ACCESS read-write STATUS current DESCRIPTION "Upper Limit Over Temperature of Alarm Clear" ::= { provCtrlExtEntry 4 } provCtrlExtUnderTempAlarmRaise OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 degree" MAX-ACCESS read-write STATUS current DESCRIPTION "Lower Limit Under Temperature of Alarm Raise" ::= { provCtrlExtEntry 5 } provCtrlExtUnderTempAlarmClear OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 degree" MAX-ACCESS read-write STATUS current DESCRIPTION "Lower Limit Under Temperature of Alarm Clear" ::= { provCtrlExtEntry 6 } provLicenseGroup OBJECT IDENTIFIER ::= { provisioningGroup 45 } provLicenseAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvLicenseAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure License Alarm Detection Delay. This table is only for internal use." ::= { provLicenseGroup 1 } provLicenseAlarmEntry OBJECT-TYPE SYNTAX ProvLicenseAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { provLicenseAlarmIndex } ::= { provLicenseAlarmTable 1 } ProvLicenseAlarmEntry ::= SEQUENCE { provLicenseAlarmIndex Integer32, provLicenseAlarmNEAddress IpAddress, provLicenseAlarmDetectionDelay Integer32 } provLicenseAlarmIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { provLicenseAlarmEntry 1 } provLicenseAlarmNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { provLicenseAlarmEntry 2 } provLicenseAlarmDetectionDelay OBJECT-TYPE SYNTAX Integer32 (0..5) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "License Alarm Detection Delay." DEFVAL { 3 } ::= { provLicenseAlarmEntry 3 } ----------------------------------------------- -- maintenanceGroup Definitions ----------------------------------------------- maintCommonGroup OBJECT IDENTIFIER ::= { maintenanceGroup 1 } maintCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintCommonGroup 1 } maintCommonEntry OBJECT-TYPE SYNTAX MaintCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintCommonIndex } ::= { maintCommonTable 1 } MaintCommonEntry ::= SEQUENCE { maintCommonIndex Integer32, maintCommonNEAddress IpAddress, maintMode OffOnValue, maintLANDeviceReset INTEGER, maintShipment INTEGER } maintCommonIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintCommonEntry 1 } maintCommonNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintCommonEntry 2 } maintMode OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='MAINTENANCE' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintCommonEntry 3 } maintLANDeviceReset OBJECT-TYPE SYNTAX INTEGER { invalid(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='LAN DEVICE RESET' LOGSTATUS='NOT SELECTED(1),RESET(2)' TRAP=controlEvent" ::= { maintCommonEntry 4 } maintShipment OBJECT-TYPE SYNTAX INTEGER { invalid(0), rfFrequencyClear(1), provisioningClear(2), allClearWoSoftkeyAndConfig(3), allClearWoSoftkey(4), allClear(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides function for restoring factory defaults. This object behaves as 'writeOnly', and the returned value is not guaranteed. 'provisioningClear' will clear provisioning data without softkey, user/network config, and internal data." ::= { maintCommonEntry 5 } maintCardTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintCommonGroup 2 } maintCardEntry OBJECT-TYPE SYNTAX MaintCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintCardIndex } ::= { maintCardTable 1 } MaintCardEntry ::= SEQUENCE { maintCardIndex Integer32, maintCardNEAddress IpAddress, maintCardReset INTEGER } maintCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintCardEntry 1 } maintCardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintCardEntry 2 } maintCardReset OBJECT-TYPE SYNTAX INTEGER { invalid(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Card Reset Control. When set 'reset' to this object, the card will reset itself. if the card has firmware, the card can accept the 'revert' request, and if set, the card will restart with the firmware installed in other side." ::= { maintCardEntry 3 } maintOduResetTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintOduResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintCommonGroup 3 } maintOduResetEntry OBJECT-TYPE SYNTAX MaintOduResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintOduResetIfIndex } ::= { maintOduResetTable 1 } MaintOduResetEntry ::= SEQUENCE { maintOduResetIfIndex InterfaceIndex, maintOduResetNEAddress IpAddress, maintOduReset INTEGER } maintOduResetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintOduResetEntry 1 } maintOduResetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintOduResetEntry 2 } maintOduReset OBJECT-TYPE SYNTAX INTEGER { invalid(0), resetNormal(1), resetRevert(2), resetNone(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='MAINTENANCE' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintOduResetEntry 3 } maintIduResetTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintIduResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintCommonGroup 4 } maintIduResetEntry OBJECT-TYPE SYNTAX MaintIduResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintIduResetIndex } ::= { maintIduResetTable 1 } MaintIduResetEntry ::= SEQUENCE { maintIduResetIndex Integer32, maintIduResetNEAddress IpAddress, maintIduReset INTEGER } maintIduResetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintIduResetEntry 1 } maintIduResetNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintIduResetEntry 2 } maintIduReset OBJECT-TYPE SYNTAX INTEGER { invalid(0), resetNormal(1), resetRevert(2), resetNone(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='MAINTENANCE' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintIduResetEntry 3 } maintModemTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintenanceGroup 2 } maintModemEntry OBJECT-TYPE SYNTAX MaintModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintModemIfIndex } ::= { maintModemTable 1 } MaintModemEntry ::= SEQUENCE { maintModemIfIndex InterfaceIndex, maintModemNEAddress IpAddress, maintModemATPCManualControl INTEGER, maintModemATPCManualContPower Integer32, maintModemTxMuteControl OffOnValue, maintModemTxMuteContReleaseTime Integer32, maintModemCW OffOnValue, maintModemCWReleaseTime Integer32, maintModemIFLoopback OffOnValue, maintModemIFLoopbackReleaseTime Integer32, maintModemRFLoopback OffOnValue, maintModemRFLoopbackReleaseTime Integer32, maintModemForcedXPICCont INTEGER, maintModemTxModulationManualControl INTEGER, maintModemRFSubBandSelect DisplayString, maintModemL2Loopback1 OffOnValue, maintModemL2Loopback1ReleaseTime Integer32, maintModemL2Loopback2 OffOnValue, maintModemL2Loopback2ReleaseTime Integer32 } maintModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintModemEntry 1 } maintModemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintModemEntry 2 } maintModemATPCManualControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), auto(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='ATPC MANUAL CONTROL' LOGSTATUS='AUTO(1),MANUAL(2)' TRAP=controlEvent" ::= { maintModemEntry 3 } maintModemATPCManualContPower OBJECT-TYPE SYNTAX Integer32 (-380..400) MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='ATPC MANUAL POWER[dB]' LOGSTATUS='%d' TRAP=controlEvent" ::= { maintModemEntry 4 } maintModemTxMuteControl OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TX MUTE CONTROL' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintModemEntry 5 } maintModemTxMuteContReleaseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TX MUTE OFF TIMER' LOGSTATUS='%d' TRAP=controlEvent" ::= { maintModemEntry 6 } maintModemCW OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='CW CONTROL' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintModemEntry 7 } maintModemCWReleaseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TX MUTE OFF TIMER' LOGSTATUS='%d' TRAP=controlEvent" ::= { maintModemEntry 8 } maintModemIFLoopback OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='IF LOOPBACK' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintModemEntry 9 } maintModemIFLoopbackReleaseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TX MUTE OFF TIMER' LOGSTATUS='%d' TRAP=controlEvent" ::= { maintModemEntry 10 } maintModemRFLoopback OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='RF LOOPBACK' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintModemEntry 11 } maintModemRFLoopbackReleaseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TX MUTE OFF TIMER' LOGSTATUS='%d' TRAP=controlEvent" ::= { maintModemEntry 12 } maintModemForcedXPICCont OBJECT-TYPE SYNTAX INTEGER { invalid(0), auto(1), forcedReset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='XPIC CONTROL' LOGSTATUS='AUTO(1),FORCED RESET(2)' TRAP=controlEvent" ::= { maintModemEntry 13 } maintModemTxModulationManualControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), auto(1), qpsk(2), qam16(3), qam32(4), qam64(5), qam128(6), qam256(7), qam512(8), qam1024(9), qam2048(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls Tx Modulation. The value 'psk8' is available only for the iPASOLINK EX. This value is valid only when esModemChSpacing is 'cs500m'." ::= { maintModemEntry 14 } maintModemRFSubBandSelect OBJECT-TYPE SYNTAX DisplayString (SIZE(1..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='RF SUB BAND SELECT' LOGSTATUS='A(65),B(66),C(67),D(68),E(69),F(70),G(71),H(72),J(74),K(75),L(76),M(77),N(78),P(80),R(82),X(88)' TRAP=controlEvent" ::= { maintModemEntry 15 } maintModemL2Loopback1 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls Loopback function for L2 frames. When the object is set to 'On', the L2 frames received from the Radio Link are loopbacked." ::= { maintModemEntry 16 } maintModemL2Loopback1ReleaseTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls Release Time for L2 loopback1 function. L2 loopback function will be released automatically when the timer which is configured by this object is expired." ::= { maintModemEntry 17 } maintModemL2Loopback2 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls Loopback function for L2 frames. When the object is set to 'On', the L2 frames transmitted to the Radio Link are loopbacked." ::= { maintModemEntry 18 } maintModemL2Loopback2ReleaseTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls Release Time for L2 loopback2 function. L2 loopback function will be released automatically when the timer which is configured by this object is expired." ::= { maintModemEntry 19 } maintSwGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintenanceGroup 3 } maintSwGroupEntry OBJECT-TYPE SYNTAX MaintSwGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintSwGroupIfIndex } ::= { maintSwGroupTable 1 } MaintSwGroupEntry ::= SEQUENCE { maintSwGroupIfIndex InterfaceIndex, maintSwGroupNEAddress IpAddress, maintTxSWControl INTEGER, maintTxSWMode INTEGER, maintRxSWControl INTEGER, maintRxSWMode INTEGER, maintDADEAdjust INTEGER, maintDADEAdjustEnable OffOnValue } maintSwGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintSwGroupEntry 1 } maintSwGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintSwGroupEntry 2 } maintTxSWControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), forcedNo1(2), forcedNo2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "TX SW Manual Control" ::= { maintSwGroupEntry 3 } maintTxSWMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), clear2(2), forcedNo1(3), forcedNo2(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX SW Manual Control Status" ::= { maintSwGroupEntry 4 } maintRxSWControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), manualNo1(2), manualNo2(3), forcedNo1(4), forcedNo2(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "RX SW Manual Control" ::= { maintSwGroupEntry 5 } maintRxSWMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), clear2(2), manualNo1(3), manualNo2(4), forcedNo1(5), forcedNo2(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "RX SW Manual Control Status" ::= { maintSwGroupEntry 6 } maintDADEAdjust OBJECT-TYPE SYNTAX INTEGER { invalid(0), dade(1), offsetDade(2), dadeOff(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='DADE ADJUST' LOGSTATUS='DADE(1),OFFSET DADE(2),DADE OFF(3)' TRAP=controlEvent" ::= { maintSwGroupEntry 7 } maintDADEAdjustEnable OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-only STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='DADE ADJUST ENABLE' LOGSTATUS='OFF(1),ON(EXECUTING)(2)' TRAP=statusChange" ::= { maintSwGroupEntry 8 } maintE1SystemTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintE1SystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintenanceGroup 4 } maintE1SystemEntry OBJECT-TYPE SYNTAX MaintE1SystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintE1SystemIfIndex } ::= { maintE1SystemTable 1 } MaintE1SystemEntry ::= SEQUENCE { maintE1SystemIfIndex InterfaceIndex, maintE1SystemNEAddress IpAddress, maintE1ChLoopback1 OffOnValue, maintE1ChLoopback2 OffOnValue } maintE1SystemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintE1SystemEntry 1 } maintE1SystemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintE1SystemEntry 2 } maintE1ChLoopback1 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='E1 CH LOOPBACK1' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintE1SystemEntry 3 } maintE1ChLoopback2 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='E1 CH LOOPBACK2' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintE1SystemEntry 4 } maintStm1Group OBJECT IDENTIFIER ::= { maintenanceGroup 5 } maintStm1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintStm1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintStm1Group 1 } maintStm1PortEntry OBJECT-TYPE SYNTAX MaintStm1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintStm1PortIfIndex } ::= { maintStm1PortTable 1 } MaintStm1PortEntry ::= SEQUENCE { maintStm1PortIfIndex InterfaceIndex, maintStm1PortNEAddress IpAddress, maintStm1ChLoopback1 OffOnValue, maintStm1ChLoopback2 OffOnValue, maintStm1ForcedLSCont OffOnValue, maintStm1ALSMuanualRestart INTEGER } maintStm1PortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintStm1PortEntry 1 } maintStm1PortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintStm1PortEntry 2 } maintStm1ChLoopback1 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintStm1PortEntry 3 } maintStm1ChLoopback2 OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintStm1PortEntry 4 } maintStm1ForcedLSCont OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintStm1PortEntry 5 } maintStm1ALSMuanualRestart OBJECT-TYPE SYNTAX INTEGER { invalid(0), off(1), shortOn(2), longOn(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintStm1PortEntry 6 } maintTimingSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintTimingSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintenanceGroup 6 } maintTimingSourceEntry OBJECT-TYPE SYNTAX MaintTimingSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintTimingSourceIndex } ::= { maintTimingSourceTable 1 } MaintTimingSourceEntry ::= SEQUENCE { maintTimingSourceIndex INTEGER, maintTimingSourceNEAddress IpAddress, maintTimingSourceSwControl INTEGER, maintTimingSourceLockOut OffOnValue } maintTimingSourceIndex OBJECT-TYPE SYNTAX INTEGER { timingSource1(1), timingSource2(2), timingSource3(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintTimingSourceEntry 1 } maintTimingSourceNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintTimingSourceEntry 2 } maintTimingSourceSwControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), normal(1), manualSw(2), forcedSw(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGITEM='TIMING SOURCE SW CONTROL' LOGSTATUS='NORMAL(1),MANUAL SW(2),FORCED SW(3)' TRAP=controlEvent" ::= { maintTimingSourceEntry 3 } maintTimingSourceLockOut OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintTimingSourceEntry 4 } maintSncpSwTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintSncpSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintenanceGroup 8 } maintSncpSwEntry OBJECT-TYPE SYNTAX MaintSncpSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintSncpSwIndex } ::= { maintSncpSwTable 1 } MaintSncpSwEntry ::= SEQUENCE { maintSncpSwIndex Integer32, maintSncpSwNEAddress IpAddress, maintSncpSwControl INTEGER, maintSncpSwMode INTEGER } maintSncpSwIndex OBJECT-TYPE SYNTAX Integer32 (1..2352) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintSncpSwEntry 1 } maintSncpSwNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintSncpSwEntry 2 } maintSncpSwControl OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), forcedSwToProtection(2), forcedSwToWork(3), manualSwToProtection(4), manualSwToWork(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNCP Manual SW Control" ::= { maintSncpSwEntry 3 } maintSncpSwMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), clear(1), clear2(2), forcedSwToProtection(3), forcedSwToWork(4), manualSwToProtection(5), manualSwToWork(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "SNCP Manual SW Control Status" ::= { maintSncpSwEntry 4 } maintETHGroup OBJECT IDENTIFIER ::= { maintenanceGroup 9 } maintFdbGroup OBJECT IDENTIFIER ::= { maintETHGroup 1 } maintFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the maintenance functions for FDB entries." ::= { maintFdbGroup 1 } maintFdbEntry OBJECT-TYPE SYNTAX MaintFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintFdbIndex } ::= { maintFdbTable 1 } MaintFdbEntry ::= SEQUENCE { maintFdbIndex Integer32, maintFdbNEAddress IpAddress, maintFdbTableClearAll OffOnValue, maintFdbTableClearPort InterfaceIndex, maintFdbTableClearVlan Integer32, maintFdbGetLearningInfoExecute OffOnValue, maintFdbClearLearningInfoExecute OffOnValue } maintFdbIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintFdbEntry 1 } maintFdbNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintFdbEntry 2 } maintFdbTableClearAll OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "FDB clear request. When the object is set to 'on', the all forwarding database entries will be cleared." ::= { maintFdbEntry 3 } maintFdbTableClearPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "FDB clear request per port. Setting to interface index of target port, the forwarding database entries for the specified port will be cleared." ::= { maintFdbEntry 4 } maintFdbTableClearVlan OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "FDB clear request per VLAN. Setting to VLAN ID of target VLAN, the forwarding database entries for the specified VLAN will be cleared." ::= { maintFdbEntry 5 } maintFdbGetLearningInfoExecute OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Request to export dynamic FDB entries. The system provides the file interface for dynamic FDB entries. The agent start to export dynamic FDB entries to file, when the object is set to 'on'. After completing to export, the object will be changed to 'off' and the manager can retrieve the file using usual file transferring method." ::= { maintFdbEntry 6 } maintFdbClearLearningInfoExecute OBJECT-TYPE SYNTAX OffOnValue MAX-ACCESS read-write STATUS current DESCRIPTION "Request to delete the exported FDB file. The exported FDB file is created on the internal file system, the manager should delete that file using this object." ::= { maintFdbEntry 7 } maintEthOamGroup OBJECT IDENTIFIER ::= { maintETHGroup 2 } maintEthOamLbTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LB Execution Management Table" ::= { maintEthOamGroup 1 } maintEthOamLbEntry OBJECT-TYPE SYNTAX MaintEthOamLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLbMepIndex } ::= { maintEthOamLbTable 1 } MaintEthOamLbEntry ::= SEQUENCE { maintEthOamLbMepIndex IpeMepId, maintEthOamLbNEAddress IpAddress, maintEthOamLbExecute INTEGER, maintEthOamLbDesAddress MacAddress, maintEthOamLbCount Integer32, maintEthOamLbPeriod Integer32, maintEthOamLbSize Integer32, maintEthOamLbPriority Integer32 } maintEthOamLbMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLbEntry 1 } maintEthOamLbNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLbEntry 2 } maintEthOamLbExecute OBJECT-TYPE SYNTAX INTEGER { invalid(0), run(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-LB Execution" ::= { maintEthOamLbEntry 3 } maintEthOamLbDesAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamLbEntry 4 } maintEthOamLbCount OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit Count(1-127)" ::= { maintEthOamLbEntry 5 } maintEthOamLbPeriod OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit Period(1-10)" ::= { maintEthOamLbEntry 6 } maintEthOamLbSize OBJECT-TYPE SYNTAX Integer32 (64..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "PDU Size(64-9600)" ::= { maintEthOamLbEntry 7 } maintEthOamLbPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority(0-7)" ::= { maintEthOamLbEntry 8 } maintEthOamLbResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLbResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LB Result Table" ::= { maintEthOamGroup 2 } maintEthOamLbResultEntry OBJECT-TYPE SYNTAX MaintEthOamLbResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLbResultMepIndex } ::= { maintEthOamLbResultTable 1 } MaintEthOamLbResultEntry ::= SEQUENCE { maintEthOamLbResultMepIndex IpeMepId, maintEthOamLbResultNEAddress IpAddress, maintEthOamLbResultIfIndex InterfaceIndex, maintEthOamLbResultMacAddress MacAddress, maintEthOamLbResultVid Integer32, maintEthOamLbResultMegId OCTET STRING, maintEthOamLbResultMepId Integer32, maintEthOamLbResultMegLevel Integer32, maintEthOamLbResultDaType INTEGER, maintEthOamLbResultSuccess Integer32, maintEthOamLbResultFail Integer32, maintEthOamLbResultMinTime Integer32, maintEthOamLbResultMaxTime Integer32, maintEthOamLbResultAveTime Integer32, maintEthOamLbResultDevTime Integer32, maintEthOamLbResultLastUpTime DateAndTime, maintEthOamLbResultExecStatus INTEGER } maintEthOamLbResultMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLbResultEntry 1 } maintEthOamLbResultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLbResultEntry 2 } maintEthOamLbResultIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ifindex" ::= { maintEthOamLbResultEntry 3 } maintEthOamLbResultMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamLbResultEntry 4 } maintEthOamLbResultVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Vlan Id" ::= { maintEthOamLbResultEntry 5 } maintEthOamLbResultMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..43)) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's MEG ID" ::= { maintEthOamLbResultEntry 6 } maintEthOamLbResultMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Id" ::= { maintEthOamLbResultEntry 7 } maintEthOamLbResultMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Meg Level" ::= { maintEthOamLbResultEntry 8 } maintEthOamLbResultDaType OBJECT-TYPE SYNTAX INTEGER { multicast(0), unicast(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address Type(Multicast or Unicast)" ::= { maintEthOamLbResultEntry 9 } maintEthOamLbResultSuccess OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LB Success Count" ::= { maintEthOamLbResultEntry 10 } maintEthOamLbResultFail OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LB Fail Count(for UnicastLB only)" ::= { maintEthOamLbResultEntry 11 } maintEthOamLbResultMinTime OBJECT-TYPE SYNTAX Integer32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Round Trip Time(for UnicastLB only)" ::= { maintEthOamLbResultEntry 12 } maintEthOamLbResultMaxTime OBJECT-TYPE SYNTAX Integer32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Round Trip Time(for UnicastLB only)" ::= { maintEthOamLbResultEntry 13 } maintEthOamLbResultAveTime OBJECT-TYPE SYNTAX Integer32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average Round Trip Time(for UnicastLB only)" ::= { maintEthOamLbResultEntry 14 } maintEthOamLbResultDevTime OBJECT-TYPE SYNTAX Integer32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Deflection Round Trip Time(for UnicastLB only)" ::= { maintEthOamLbResultEntry 15 } maintEthOamLbResultLastUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LB Start Time" ::= { maintEthOamLbResultEntry 16 } maintEthOamLbResultExecStatus OBJECT-TYPE SYNTAX INTEGER { none(0), running(1), stop(2), complete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LB Execution Status" ::= { maintEthOamLbResultEntry 17 } maintEthOamLbResultMacTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLbResultMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LB Result MAC Address Table" ::= { maintEthOamGroup 3 } maintEthOamLbResultMacEntry OBJECT-TYPE SYNTAX MaintEthOamLbResultMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLbResultMacMepIndex, maintEthOamLbResultMacNumber } ::= { maintEthOamLbResultMacTable 1 } MaintEthOamLbResultMacEntry ::= SEQUENCE { maintEthOamLbResultMacMepIndex IpeMepId, maintEthOamLbResultMacNumber Integer32, maintEthOamLbResultMacNEAddress IpAddress, maintEthOamLbResultMac INTEGER, maintEthOamLbResultMacSrcAddress MacAddress, maintEthOamLbResultMacTime Integer32 } maintEthOamLbResultMacMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLbResultMacEntry 1 } maintEthOamLbResultMacNumber OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LBR Receive Number" ::= { maintEthOamLbResultMacEntry 2 } maintEthOamLbResultMacNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLbResultMacEntry 3 } maintEthOamLbResultMac OBJECT-TYPE SYNTAX INTEGER { invalid(0), receive(1), timeout(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LB Result(for UnicastLB only)" ::= { maintEthOamLbResultMacEntry 4 } maintEthOamLbResultMacSrcAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamLbResultMacEntry 5 } maintEthOamLbResultMacTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Round Trip Time" ::= { maintEthOamLbResultMacEntry 6 } maintEthOamLtTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LT Execution Management Table" ::= { maintEthOamGroup 4 } maintEthOamLtEntry OBJECT-TYPE SYNTAX MaintEthOamLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLtMepIndex } ::= { maintEthOamLtTable 1 } MaintEthOamLtEntry ::= SEQUENCE { maintEthOamLtMepIndex IpeMepId, maintEthOamLtNEAddress IpAddress, maintEthOamLtExecute INTEGER, maintEthOamLtTargetAddress MacAddress, maintEthOamLtTtl Integer32, maintEthOamLtPriority Integer32 } maintEthOamLtMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLtEntry 1 } maintEthOamLtNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLtEntry 2 } maintEthOamLtExecute OBJECT-TYPE SYNTAX INTEGER { invalid(0), run(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-LT Execution" ::= { maintEthOamLtEntry 3 } maintEthOamLtTargetAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Target MAC Address" ::= { maintEthOamLtEntry 4 } maintEthOamLtTtl OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Time To Live(1-255)" ::= { maintEthOamLtEntry 5 } maintEthOamLtPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority(0-7)" ::= { maintEthOamLtEntry 6 } maintEthOamLtResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLtResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LT Result Table" ::= { maintEthOamGroup 5 } maintEthOamLtResultEntry OBJECT-TYPE SYNTAX MaintEthOamLtResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLtResultMepIndex } ::= { maintEthOamLtResultTable 1 } MaintEthOamLtResultEntry ::= SEQUENCE { maintEthOamLtResultMepIndex IpeMepId, maintEthOamLtResultNEAddress IpAddress, maintEthOamLtResultIfIndex InterfaceIndex, maintEthOamLtResultMacAddress MacAddress, maintEthOamLtResultVid Integer32, maintEthOamLtResultMegId OCTET STRING, maintEthOamLtResultMepId Integer32, maintEthOamLtResultMegLevel Integer32, maintEthOamLtResultTtl Integer32, maintEthOamLtResultReceive Integer32, maintEthOamLtResultLastUpTime DateAndTime, maintEthOamLtResultExecStatus INTEGER } maintEthOamLtResultMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLtResultEntry 1 } maintEthOamLtResultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLtResultEntry 2 } maintEthOamLtResultIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ifindex" ::= { maintEthOamLtResultEntry 3 } maintEthOamLtResultMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamLtResultEntry 4 } maintEthOamLtResultVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Vlan Id" ::= { maintEthOamLtResultEntry 5 } maintEthOamLtResultMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..43)) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's MEG ID" ::= { maintEthOamLtResultEntry 6 } maintEthOamLtResultMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Id" ::= { maintEthOamLtResultEntry 7 } maintEthOamLtResultMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Meg Level" ::= { maintEthOamLtResultEntry 8 } maintEthOamLtResultTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "TTL" ::= { maintEthOamLtResultEntry 9 } maintEthOamLtResultReceive OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LTR Receive Count" ::= { maintEthOamLtResultEntry 10 } maintEthOamLtResultLastUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LT Start Time" ::= { maintEthOamLtResultEntry 11 } maintEthOamLtResultExecStatus OBJECT-TYPE SYNTAX INTEGER { none(0), running(1), stop(2), complete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LT Execution Status" ::= { maintEthOamLtResultEntry 12 } maintEthOamLtResultMacTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLtResultMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LT Result MAC Address Table" ::= { maintEthOamGroup 6 } maintEthOamLtResultMacEntry OBJECT-TYPE SYNTAX MaintEthOamLtResultMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLtResultMacMepIndex, maintEthOamLtResultMacNumber } ::= { maintEthOamLtResultMacTable 1 } MaintEthOamLtResultMacEntry ::= SEQUENCE { maintEthOamLtResultMacMepIndex IpeMepId, maintEthOamLtResultMacNumber Integer32, maintEthOamLtResultMacNEAddress IpAddress, maintEthOamLtResultMacTtl Integer32, maintEthOamLtResultMacSrcAddress MacAddress, maintEthOamLtResultMacRlyAct INTEGER } maintEthOamLtResultMacMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLtResultMacEntry 1 } maintEthOamLtResultMacNumber OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LTR Receive Number" ::= { maintEthOamLtResultMacEntry 2 } maintEthOamLtResultMacNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLtResultMacEntry 3 } maintEthOamLtResultMacTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Time To Live" ::= { maintEthOamLtResultMacEntry 4 } maintEthOamLtResultMacSrcAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamLtResultMacEntry 5 } maintEthOamLtResultMacRlyAct OBJECT-TYPE SYNTAX INTEGER { invalid(0), relayHit(1), relayFDB(2), relayNFDB(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RelayAction" ::= { maintEthOamLtResultMacEntry 6 } maintEthOamDmTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-DM Execution Management Table" ::= { maintEthOamGroup 7 } maintEthOamDmEntry OBJECT-TYPE SYNTAX MaintEthOamDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamDmMepIndex } ::= { maintEthOamDmTable 1 } MaintEthOamDmEntry ::= SEQUENCE { maintEthOamDmMepIndex IpeMepId, maintEthOamDmNEAddress IpAddress, maintEthOamDmExecute INTEGER, maintEthOamDmDesAddress MacAddress, maintEthOamDmCount Integer32, maintEthOamDmPeriodS Integer32, maintEthOamDmPriority Integer32 } maintEthOamDmMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamDmEntry 1 } maintEthOamDmNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamDmEntry 2 } maintEthOamDmExecute OBJECT-TYPE SYNTAX INTEGER { invalid(0), run(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-DM Execution" ::= { maintEthOamDmEntry 3 } maintEthOamDmDesAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamDmEntry 4 } maintEthOamDmCount OBJECT-TYPE SYNTAX Integer32 (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-DM Transmit Count(1-500)" ::= { maintEthOamDmEntry 5 } maintEthOamDmPeriodS OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-DM Transmit Period Second" ::= { maintEthOamDmEntry 6 } maintEthOamDmPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority(0-7)" ::= { maintEthOamDmEntry 7 } maintEthOamDmResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamDmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-DM Result Table" ::= { maintEthOamGroup 8 } maintEthOamDmResultEntry OBJECT-TYPE SYNTAX MaintEthOamDmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamDmResultMepIndex } ::= { maintEthOamDmResultTable 1 } MaintEthOamDmResultEntry ::= SEQUENCE { maintEthOamDmResultMepIndex IpeMepId, maintEthOamDmResultNEAddress IpAddress, maintEthOamDmResultIfIndex InterfaceIndex, maintEthOamDmResultSrcMacAddress MacAddress, maintEthOamDmResultVid Integer32, maintEthOamDmResultMegId OCTET STRING, maintEthOamDmResultMepId Integer32, maintEthOamDmResultMegLevel Integer32, maintEthOamDmResultDesMacAddress MacAddress, maintEthOamDmResultRequest Integer32, maintEthOamDmResultReceive Integer32, maintEthOamDmResultMinTime Integer32, maintEthOamDmResultMaxTime Integer32, maintEthOamDmResultAveTime Integer32, maintEthOamDmResultDevTime Integer32, maintEthOamDmResultErrCount Integer32, maintEthOamDmResultLastUpTime DateAndTime, maintEthOamDmResultExecStatus INTEGER } maintEthOamDmResultMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamDmResultEntry 1 } maintEthOamDmResultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamDmResultEntry 2 } maintEthOamDmResultIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ifindex" ::= { maintEthOamDmResultEntry 3 } maintEthOamDmResultSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamDmResultEntry 4 } maintEthOamDmResultVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Vlan Id" ::= { maintEthOamDmResultEntry 5 } maintEthOamDmResultMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..43)) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's MEG ID" ::= { maintEthOamDmResultEntry 6 } maintEthOamDmResultMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID" ::= { maintEthOamDmResultEntry 7 } maintEthOamDmResultMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Meg Level" ::= { maintEthOamDmResultEntry 8 } maintEthOamDmResultDesMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamDmResultEntry 9 } maintEthOamDmResultRequest OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-DMM Transmit Count" ::= { maintEthOamDmResultEntry 10 } maintEthOamDmResultReceive OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-DMR Receive Count" ::= { maintEthOamDmResultEntry 11 } maintEthOamDmResultMinTime OBJECT-TYPE SYNTAX Integer32 (0..8388608) UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Round Trip Time" ::= { maintEthOamDmResultEntry 12 } maintEthOamDmResultMaxTime OBJECT-TYPE SYNTAX Integer32 (0..8388608) UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Round Trip Time" ::= { maintEthOamDmResultEntry 13 } maintEthOamDmResultAveTime OBJECT-TYPE SYNTAX Integer32 (0..8388608) UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Average Round Trip Time" ::= { maintEthOamDmResultEntry 14 } maintEthOamDmResultDevTime OBJECT-TYPE SYNTAX Integer32 (0..8388608) UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Deflection Round Trip Time" ::= { maintEthOamDmResultEntry 15 } maintEthOamDmResultErrCount OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Error Count" ::= { maintEthOamDmResultEntry 16 } maintEthOamDmResultLastUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-DM Start Time" ::= { maintEthOamDmResultEntry 17 } maintEthOamDmResultExecStatus OBJECT-TYPE SYNTAX INTEGER { none(0), running(1), stop(2), complete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-DM Execution Status" ::= { maintEthOamDmResultEntry 18 } maintEthOamLmTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LM Execution Management Table" ::= { maintEthOamGroup 9 } maintEthOamLmEntry OBJECT-TYPE SYNTAX MaintEthOamLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLmMepIndex } ::= { maintEthOamLmTable 1 } MaintEthOamLmEntry ::= SEQUENCE { maintEthOamLmMepIndex IpeMepId, maintEthOamLmNEAddress IpAddress, maintEthOamLmExecute INTEGER, maintEthOamLmDesAddress MacAddress, maintEthOamLmCount Integer32, maintEthOamLmPeriodS Integer32, maintEthOamLmPriority Integer32, maintEthOamLmTargetFrmPriority Integer32 } maintEthOamLmMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLmEntry 1 } maintEthOamLmNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLmEntry 2 } maintEthOamLmExecute OBJECT-TYPE SYNTAX INTEGER { invalid(0), run(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-DM Execution" ::= { maintEthOamLmEntry 3 } maintEthOamLmDesAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamLmEntry 4 } maintEthOamLmCount OBJECT-TYPE SYNTAX Integer32 (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-LM Transmit Count(1-500)" ::= { maintEthOamLmEntry 5 } maintEthOamLmPeriodS OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "ETH-LM Transmit Period Second" ::= { maintEthOamLmEntry 6 } maintEthOamLmPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority(0-7)" ::= { maintEthOamLmEntry 7 } maintEthOamLmTargetFrmPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Target Frame Priority" ::= { maintEthOamLmEntry 8 } maintEthOamLmResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamLmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ETH-LM Result Table" ::= { maintEthOamGroup 10 } maintEthOamLmResultEntry OBJECT-TYPE SYNTAX MaintEthOamLmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamLmResultMepIndex } ::= { maintEthOamLmResultTable 1 } MaintEthOamLmResultEntry ::= SEQUENCE { maintEthOamLmResultMepIndex IpeMepId, maintEthOamLmResultNEAddress IpAddress, maintEthOamLmResultIfIndex InterfaceIndex, maintEthOamLmResultSrcMacAddress MacAddress, maintEthOamLmResultVid Integer32, maintEthOamLmResultMegId OCTET STRING, maintEthOamLmResultMepId Integer32, maintEthOamLmResultMegLevel Integer32, maintEthOamLmResultDesMacAddress MacAddress, maintEthOamLmResultRequest Integer32, maintEthOamLmResultReceive Integer32, maintEthOamLmResultTxFramesNearEnd Counter32, maintEthOamLmResultRxFramesFarEnd Counter32, maintEthOamLmResultTxFramesFarEnd Counter32, maintEthOamLmResultRxFramesNearEnd Counter32, maintEthOamLmResultTxFrameLoss Counter32, maintEthOamLmResultTxFLR Integer32, maintEthOamLmResultRxFrameLoss Counter32, maintEthOamLmResultRxFLR Integer32, maintEthOamLmResultErrCount Integer32, maintEthOamLmResultLastUpTime DateAndTime, maintEthOamLmResultExecStatus INTEGER } maintEthOamLmResultMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamLmResultEntry 1 } maintEthOamLmResultNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamLmResultEntry 2 } maintEthOamLmResultIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ifindex" ::= { maintEthOamLmResultEntry 3 } maintEthOamLmResultSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { maintEthOamLmResultEntry 4 } maintEthOamLmResultVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Vlan Id" ::= { maintEthOamLmResultEntry 5 } maintEthOamLmResultMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..43)) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's MEG ID" ::= { maintEthOamLmResultEntry 6 } maintEthOamLmResultMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID" ::= { maintEthOamLmResultEntry 7 } maintEthOamLmResultMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Mep's Meg Level" ::= { maintEthOamLmResultEntry 8 } maintEthOamLmResultDesMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamLmResultEntry 9 } maintEthOamLmResultRequest OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LMM Transmit Count" ::= { maintEthOamLmResultEntry 10 } maintEthOamLmResultReceive OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LMR Receive Count" ::= { maintEthOamLmResultEntry 11 } maintEthOamLmResultTxFramesNearEnd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Frame Near Count" ::= { maintEthOamLmResultEntry 12 } maintEthOamLmResultRxFramesFarEnd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Frame Far Count" ::= { maintEthOamLmResultEntry 13 } maintEthOamLmResultTxFramesFarEnd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Frame Far Count" ::= { maintEthOamLmResultEntry 14 } maintEthOamLmResultRxFramesNearEnd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Frame Near Count" ::= { maintEthOamLmResultEntry 15 } maintEthOamLmResultTxFrameLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Frame Loss Count" ::= { maintEthOamLmResultEntry 16 } maintEthOamLmResultTxFLR OBJECT-TYPE SYNTAX Integer32 (0..1000) UNITS "0.1 percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Frame Loss Rate" ::= { maintEthOamLmResultEntry 17 } maintEthOamLmResultRxFrameLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Frame Loss Count" ::= { maintEthOamLmResultEntry 18 } maintEthOamLmResultRxFLR OBJECT-TYPE SYNTAX Integer32 (0..1000) UNITS "0.1 percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Frame Loss Rate" ::= { maintEthOamLmResultEntry 19 } maintEthOamLmResultErrCount OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Error Count" ::= { maintEthOamLmResultEntry 20 } maintEthOamLmResultLastUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LM Start Time" ::= { maintEthOamLmResultEntry 21 } maintEthOamLmResultExecStatus OBJECT-TYPE SYNTAX INTEGER { none(0), running(1), stop(2), complete(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ETH-LM Execution Status" ::= { maintEthOamLmResultEntry 22 } maintEthOamExecutionHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEthOamExecutionHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Execution History Table" ::= { maintEthOamGroup 11 } maintEthOamExecutionHistoryEntry OBJECT-TYPE SYNTAX MaintEthOamExecutionHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEthOamExecutionHistoryIndex } ::= { maintEthOamExecutionHistoryTable 1 } MaintEthOamExecutionHistoryEntry ::= SEQUENCE { maintEthOamExecutionHistoryIndex Integer32, maintEthOamExecutionHistoryNEAddress IpAddress, maintEthOamExecutionMepIndex IpeMepId, maintEthOamExecutionType INTEGER, maintEthOamExecutionDesAddress MacAddress, maintEthOamExecutionCount Integer32, maintEthOamExecutionPduSize Integer32, maintEthOamExecutionTtl Integer32, maintEthOamExecutionPeriodS Integer32, maintEthOamExecutionPriority Integer32, maintEthOamExecutionTime DateAndTime } maintEthOamExecutionHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEthOamExecutionHistoryEntry 1 } maintEthOamExecutionHistoryNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address" ::= { maintEthOamExecutionHistoryEntry 2 } maintEthOamExecutionMepIndex OBJECT-TYPE SYNTAX IpeMepId MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Index(1-128) 0 is Non use." ::= { maintEthOamExecutionHistoryEntry 3 } maintEthOamExecutionType OBJECT-TYPE SYNTAX INTEGER { invalid(0), loop-back(1), link-trace(2), delay-measurement(3), loss-measurement(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Execution Type(1:LB, 2:LT, 3:DM, 4:LM)" ::= { maintEthOamExecutionHistoryEntry 4 } maintEthOamExecutionDesAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination MAC Address" ::= { maintEthOamExecutionHistoryEntry 5 } maintEthOamExecutionCount OBJECT-TYPE SYNTAX Integer32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Count(LB:1-127, LT:Not Use, DM:1-500, LM:1-500)" ::= { maintEthOamExecutionHistoryEntry 6 } maintEthOamExecutionPduSize OBJECT-TYPE SYNTAX Integer32 (0..9600) MAX-ACCESS read-only STATUS current DESCRIPTION "PDU Size(LB:60-9600, LT/DM/LM:Not Use)" ::= { maintEthOamExecutionHistoryEntry 7 } maintEthOamExecutionTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Time To live(LT:1-255, LB/DM/LM:Not Use)" ::= { maintEthOamExecutionHistoryEntry 8 } maintEthOamExecutionPeriodS OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Period Second(LB/DM/LM:1-10, LT:Not Use)" ::= { maintEthOamExecutionHistoryEntry 9 } maintEthOamExecutionPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority(0-7)" ::= { maintEthOamExecutionHistoryEntry 10 } maintEthOamExecutionTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Execution Start Time" ::= { maintEthOamExecutionHistoryEntry 11 } maintRstpGroup OBJECT IDENTIFIER ::= { maintETHGroup 3 } maintRstpTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintRstpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintRstpGroup 1 } maintRstpEntry OBJECT-TYPE SYNTAX MaintRstpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintRstpBridgeIndex } ::= { maintRstpTable 1 } MaintRstpEntry ::= SEQUENCE { maintRstpBridgeIndex Integer32, maintRstpNEAddress IpAddress, maintRstpModeClearStatus Integer32 } maintRstpBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintRstpEntry 1 } maintRstpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintRstpEntry 2 } maintRstpModeClearStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "mode clear" ::= { maintRstpEntry 3 } maintLogGroup OBJECT IDENTIFIER ::= { maintenanceGroup 10 } maintClearLogTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintClearLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintLogGroup 1 } maintClearLogEntry OBJECT-TYPE SYNTAX MaintClearLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintClearLogIndex } ::= { maintClearLogTable 1 } MaintClearLogEntry ::= SEQUENCE { maintClearLogIndex Integer32, maintLogGroupNEAddress IpAddress, localLogClear INTEGER } maintClearLogIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintClearLogEntry 1 } maintLogGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintClearLogEntry 2 } localLogClear OBJECT-TYPE SYNTAX INTEGER { cmd(0), evt(1), alm(2), all(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FLAG=TRAP|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent" ::= { maintClearLogEntry 3 } maintModemCardGroup OBJECT IDENTIFIER ::= { maintenanceGroup 12 } maintModemCardTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintModemCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintModemCardGroup 1 } maintModemCardEntry OBJECT-TYPE SYNTAX MaintModemCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintModemCardIndex } ::= { maintModemCardTable 1 } MaintModemCardEntry ::= SEQUENCE { maintModemCardIndex Integer32, maintModemCardNEAddress IpAddress, maintModemCardLockinRequest INTEGER } maintModemCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintModemCardEntry 1 } maintModemCardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintModemCardEntry 2 } maintModemCardLockinRequest OBJECT-TYPE SYNTAX INTEGER { invalid(0), none(1), lockin(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lock-in Control" ::= { maintModemCardEntry 3 } maintEOWGroup OBJECT IDENTIFIER ::= { maintenanceGroup 16 } maintEOWTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEOWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains EOW Call SW Control." ::= { maintEOWGroup 1 } maintEOWEntry OBJECT-TYPE SYNTAX MaintEOWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEOWIndex } ::= { maintEOWTable 1 } MaintEOWEntry ::= SEQUENCE { maintEOWIndex Integer32, maintEOWNEAddress IpAddress, maintCallSwControl INTEGER } maintEOWIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEOWEntry 1 } maintEOWNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintEOWEntry 2 } maintCallSwControl OBJECT-TYPE SYNTAX INTEGER { off(0), modemSlotNo1(1), modemSlotNo2(2), modemSlotNo3(3), modemSlotNo4(4), modemSlotNo5(5), modemSlotNo6(6), modemSlotNo7(7), modemSlotNo8(8), modemSlotNo9(9), modemSlotNo10(10), modemSlotNo11(11), modemSlotNo12(12), modemSlotNo13(13), modemSlotNo14(14) } MAX-ACCESS read-write STATUS current DESCRIPTION "Call SW Control." ::= { maintEOWEntry 3 } maintEOWIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintEOWIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains EOW Buzzer Contorl." ::= { maintEOWGroup 2 } maintEOWIfEntry OBJECT-TYPE SYNTAX MaintEOWIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintEOWIfIndex } ::= { maintEOWIfTable 1 } MaintEOWIfEntry ::= SEQUENCE { maintEOWIfIndex InterfaceIndex, maintEOWIfNEAddress IpAddress, maintEOWIfSwControl INTEGER } maintEOWIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintEOWIfEntry 1 } maintEOWIfNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintEOWIfEntry 2 } maintEOWIfSwControl OBJECT-TYPE SYNTAX INTEGER { off(0), call(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "EOW Buzzer Contorl" ::= { maintEOWIfEntry 3 } maintProtectionGroup OBJECT IDENTIFIER ::= { maintenanceGroup 33 } maintStm1ApsTable OBJECT-TYPE SYNTAX SEQUENCE OF MaintStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { maintProtectionGroup 1 } maintStm1ApsEntry OBJECT-TYPE SYNTAX MaintStm1ApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { maintStm1ApsIfIndex } ::= { maintStm1ApsTable 1 } MaintStm1ApsEntry ::= SEQUENCE { maintStm1ApsIfIndex InterfaceIndex, maintStm1ApsNEAddress IpAddress, maintApsSwControl INTEGER, maintApsSwMode INTEGER } maintStm1ApsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { maintStm1ApsEntry 1 } maintStm1ApsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { maintStm1ApsEntry 2 } maintApsSwControl OBJECT-TYPE SYNTAX INTEGER { clear(1), forcedSwToProtection(2), forcedSwToWork(3), manualSwToProtection(4), manualSwToWork(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "APS Manual SW Control" ::= { maintStm1ApsEntry 3 } maintApsSwMode OBJECT-TYPE SYNTAX INTEGER { clear(1), forcedSwToProtection(2), forcedSwToWork(3), manualSwToProtection(4), manualSwToWork(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "APS Manual SW Control Status" ::= { maintStm1ApsEntry 4 } ----------------------------------------------- -- inventoryGroup Definitions ----------------------------------------------- invCardInfoGroup OBJECT IDENTIFIER ::= { inventoryGroup 1 } invMainInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvMainInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - Main Board / Ctrl Card" ::= { invCardInfoGroup 1 } invMainInfoEntry OBJECT-TYPE SYNTAX InvMainInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invMainInfoIndex } ::= { invMainInfoTable 1 } InvMainInfoEntry ::= SEQUENCE { invMainInfoIndex Integer32, invMainInfoNEAddress IpAddress, invMainName DisplayString, invMainCodeNo DisplayString, invMainSerialNo DisplayString, invMainManufacturedDate DisplayString, invMainFirmVersion DisplayString, invMainFirmVersionUncurrent DisplayString, invMainCardHardVersion DisplayString } invMainInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1|17..18) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invMainInfoEntry 1 } invMainInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invMainInfoEntry 2 } invMainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Name." ::= { invMainInfoEntry 3 } invMainCodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Code No." ::= { invMainInfoEntry 4 } invMainSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Main Board / Ctrl Card Serial No." ::= { invMainInfoEntry 5 } invMainManufacturedDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Manufactured Date" ::= { invMainInfoEntry 6 } invMainFirmVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Firmware Version." ::= { invMainInfoEntry 7 } invMainFirmVersionUncurrent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Firmware Version (Uncurrent)." ::= { invMainInfoEntry 8 } invMainCardHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Main Board / Ctrl Card Hardware Version." ::= { invMainInfoEntry 9 } invCardInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvCardInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - Option / Universal Card" ::= { invCardInfoGroup 2 } invCardInfoEntry OBJECT-TYPE SYNTAX InvCardInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invCardInfoIndex } ::= { invCardInfoTable 1 } InvCardInfoEntry ::= SEQUENCE { invCardInfoIndex Integer32, invCardInfoNEAddress IpAddress, invCardName DisplayString, invCardCodeNo DisplayString, invCardSerialNo DisplayString, invCardManufacturedDate DisplayString, invCardFirmVersion DisplayString, invCardHardVersion DisplayString } invCardInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invCardInfoEntry 1 } invCardInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invCardInfoEntry 2 } invCardName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Name. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 3 } invCardCodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Code No. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 4 } invCardSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Serial No. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 5 } invCardManufacturedDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Manufactured Date. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 6 } invCardFirmVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Firmware Version. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 7 } invCardHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Card Hardware Version. when the card is removed, the value will be changed to '**'." ::= { invCardInfoEntry 8 } invFPGAInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvFPGAInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - FPGA" ::= { inventoryGroup 2 } invFPGAInfoEntry OBJECT-TYPE SYNTAX InvFPGAInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invFPGAInfoIndex } ::= { invFPGAInfoTable 1 } InvFPGAInfoEntry ::= SEQUENCE { invFPGAInfoIndex Integer32, invFPGAInfoNEAddress IpAddress, invFPGAName DisplayString, invFPGACodeNo DisplayString, invFPGAHardVersion DisplayString } invFPGAInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invFPGAInfoEntry 1 } invFPGAInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invFPGAInfoEntry 2 } invFPGAName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Name. when the card is removed, the value will be changed to '**'." ::= { invFPGAInfoEntry 3 } invFPGACodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Code No. when the card is removed, the value will be changed to '**'." ::= { invFPGAInfoEntry 4 } invFPGAHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Version. when the card is removed, the value will be changed to '**'." ::= { invFPGAInfoEntry 5 } invModuleInfoOduTable OBJECT-TYPE SYNTAX SEQUENCE OF InvModuleInfoOduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (ODU)" ::= { inventoryGroup 3 } invModuleInfoOduEntry OBJECT-TYPE SYNTAX InvModuleInfoOduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invModuleInfoOduIfIndex } ::= { invModuleInfoOduTable 1 } InvModuleInfoOduEntry ::= SEQUENCE { invModuleInfoOduIfIndex InterfaceIndex, invModuleInfoOduNEAddress IpAddress, invOduCardName DisplayString, invOduCardCodeNo DisplayString, invOduCardHardVersion DisplayString, invOduCardSerialNo DisplayString, invOduCardManufacturedDate DisplayString, invOduCardFirmCurrentVersion DisplayString, invOduCardFirmUncurrentVersion DisplayString, invOduProvRangeATPCMax Integer32, invOduProvRangeATPCMin Integer32, invOduProvRangeMTPCMax Integer32, invOduProvRangeMTPCMin Integer32, invOduProvRangeRxThresholdMax Integer32, invOduProvRangeRxThresholdMin Integer32, invOduProvRangeHysteresisPermit INTEGER, invOduProvRangeHysteresisMax Integer32, invOduProvRangeHysteresisMin Integer32, invOduFreqInfoTxStartFrequency DisplayString, invOduFreqInfoTxStopFrequency DisplayString, invOduFreqInfoRxStartFrequency DisplayString, invOduFreqInfoRxStopFrequency DisplayString, invOduFreqInfoFrequencyStep DisplayString, invOduFreqInfoShiftFrequency DisplayString, invOduFreqInfoUpperLower INTEGER, invOduFreqInfoTxPhase INTEGER, invOduFreqInfoRxPhase INTEGER, invOduFreqInfoSubBand DisplayString, invOduFreqInfoTxRxIndependence INTEGER, invOduFreqInfoSupportedIpe INTEGER, invOduFreqInfoSubBand1 DisplayString, invOduFreqInfoSubBand2 DisplayString, invOduFreqInfoSubBand3 DisplayString, invOduFreqInfoSubBand4 DisplayString, invOduFreqInfoSubBand5 DisplayString, invOduFreqInfoSubBand6 DisplayString, invOduFreqInfoSubBand7 DisplayString, invOduFreqInfoSubBand8 DisplayString, invOduFreqInfoSubBand9 DisplayString, invOduFreqInfoSubBand10 DisplayString } invModuleInfoOduIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invModuleInfoOduEntry 1 } invModuleInfoOduNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invModuleInfoOduEntry 2 } invOduCardName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Name. when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 3 } invOduCardCodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Code Name. when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 4 } invOduCardHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Hardware version. when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 5 } invOduCardSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Serial No. when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 6 } invOduCardManufacturedDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Manufactured Date. when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 7 } invOduCardFirmCurrentVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Firmware information (current). when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 8 } invOduCardFirmUncurrentVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Firmware information (uncurrent). when the ODU is removed or disconnected, the value will be changed to '**'." ::= { invModuleInfoOduEntry 9 } invOduProvRangeATPCMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range ATPC MAX (dbm)" ::= { invModuleInfoOduEntry 10 } invOduProvRangeATPCMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range ATPC MIN (dbm)" ::= { invModuleInfoOduEntry 11 } invOduProvRangeMTPCMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range MTPC MAX (dbm)" ::= { invModuleInfoOduEntry 12 } invOduProvRangeMTPCMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range MTPC MIN (dbm)" ::= { invModuleInfoOduEntry 13 } invOduProvRangeRxThresholdMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range RX Threshold MAX (dbm)" ::= { invModuleInfoOduEntry 14 } invOduProvRangeRxThresholdMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range RX Threshold MIN (dbm)" ::= { invModuleInfoOduEntry 15 } invOduProvRangeHysteresisPermit OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Range Hysteresis Permit" ::= { invModuleInfoOduEntry 16 } invOduProvRangeHysteresisMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Range Hysteresis MAX (dB)" ::= { invModuleInfoOduEntry 17 } invOduProvRangeHysteresisMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Range Hysteresis MIN (dB)" ::= { invModuleInfoOduEntry 18 } invOduFreqInfoTxStartFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - TX Start Frequency (MHz)" ::= { invModuleInfoOduEntry 19 } invOduFreqInfoTxStopFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - TX Stop Frequency (MHz)" ::= { invModuleInfoOduEntry 20 } invOduFreqInfoRxStartFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - RX Start Frequency (MHz)" ::= { invModuleInfoOduEntry 21 } invOduFreqInfoRxStopFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - RX Stop Frequency (MHz)" ::= { invModuleInfoOduEntry 22 } invOduFreqInfoFrequencyStep OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Frequency Step (MHz)" ::= { invModuleInfoOduEntry 23 } invOduFreqInfoShiftFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Shift Frequency (MHz)" ::= { invModuleInfoOduEntry 24 } invOduFreqInfoUpperLower OBJECT-TYPE SYNTAX INTEGER { lower(1), upper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Upper / Lower" ::= { invModuleInfoOduEntry 25 } invOduFreqInfoTxPhase OBJECT-TYPE SYNTAX INTEGER { forward(1), reverse(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - TX Phase" ::= { invModuleInfoOduEntry 26 } invOduFreqInfoRxPhase OBJECT-TYPE SYNTAX INTEGER { forward(1), reverse(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - RX Phase" ::= { invModuleInfoOduEntry 27 } invOduFreqInfoSubBand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band" ::= { invModuleInfoOduEntry 28 } invOduFreqInfoTxRxIndependence OBJECT-TYPE SYNTAX INTEGER { notIndependence(1), independence(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - TX / RX Independence" ::= { invModuleInfoOduEntry 29 } invOduFreqInfoSupportedIpe OBJECT-TYPE SYNTAX INTEGER { notSupported(1), supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Supported iPASOLINK" ::= { invModuleInfoOduEntry 30 } invOduFreqInfoSubBand1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 01" ::= { invModuleInfoOduEntry 31 } invOduFreqInfoSubBand2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 02" ::= { invModuleInfoOduEntry 32 } invOduFreqInfoSubBand3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 03" ::= { invModuleInfoOduEntry 33 } invOduFreqInfoSubBand4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 04" ::= { invModuleInfoOduEntry 34 } invOduFreqInfoSubBand5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 05" ::= { invModuleInfoOduEntry 35 } invOduFreqInfoSubBand6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 06" ::= { invModuleInfoOduEntry 36 } invOduFreqInfoSubBand7 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 07" ::= { invModuleInfoOduEntry 37 } invOduFreqInfoSubBand8 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 08" ::= { invModuleInfoOduEntry 38 } invOduFreqInfoSubBand9 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 09" ::= { invModuleInfoOduEntry 39 } invOduFreqInfoSubBand10 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ODU Frequency Information - Sub Band 10" ::= { invModuleInfoOduEntry 40 } invUpdateInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvUpdateInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inventory Update Information" ::= { inventoryGroup 4 } invUpdateInfoEntry OBJECT-TYPE SYNTAX InvUpdateInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invUpdateInfoIndex } ::= { invUpdateInfoTable 1 } InvUpdateInfoEntry ::= SEQUENCE { invUpdateInfoIndex Integer32, invUpdateInfoNEAddress IpAddress, invUpdateInfoSummary OCTET STRING } invUpdateInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invUpdateInfoEntry 1 } invUpdateInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invUpdateInfoEntry 2 } invUpdateInfoSummary OBJECT-TYPE SYNTAX OCTET STRING (SIZE(12..12|20..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory Update Information Summary" ::= { invUpdateInfoEntry 3 } invSfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SFP / XFP Information" ::= { inventoryGroup 5 } invSfpInfoEntry OBJECT-TYPE SYNTAX InvSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invSfpInfoIfIndex } ::= { invSfpInfoTable 1 } InvSfpInfoEntry ::= SEQUENCE { invSfpInfoIfIndex InterfaceIndex, invSfpInfoNEAddress IpAddress, invSfpVendorName DisplayString, invSfpVendorPn DisplayString, invSfpVendorVer DisplayString, invSfpVendorSn DisplayString, invSfpType DisplayString, invSfpManufacturedDate DisplayString, invSfpSupportedWavelength DisplayString, invSfpSupportedLinkLength DisplayString } invSfpInfoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invSfpInfoEntry 1 } invSfpInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invSfpInfoEntry 2 } invSfpVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor Name" ::= { invSfpInfoEntry 3 } invSfpVendorPn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Part Number" ::= { invSfpInfoEntry 4 } invSfpVendorVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor Revision Number" ::= { invSfpInfoEntry 5 } invSfpVendorSn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor Serial Number" ::= { invSfpInfoEntry 6 } invSfpType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SFP Type" ::= { invSfpInfoEntry 7 } invSfpManufacturedDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SFP Manufactured Date" ::= { invSfpInfoEntry 8 } invSfpSupportedWavelength OBJECT-TYPE SYNTAX DisplayString UNITS "nm" MAX-ACCESS read-only STATUS current DESCRIPTION "Wavelength supported by SFP/XFP/SFP+. If the SFP media type is not optical, this object will show the value '0'." ::= { invSfpInfoEntry 9 } invSfpSupportedLinkLength OBJECT-TYPE SYNTAX DisplayString UNITS "km" MAX-ACCESS read-only STATUS current DESCRIPTION "Link length supported by SFP/XFP/SFP+." ::= { invSfpInfoEntry 10 } invSoftkeyInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvSoftkeyInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Software Key Information." ::= { inventoryGroup 6 } invSoftkeyInfoEntry OBJECT-TYPE SYNTAX InvSoftkeyInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invSoftkeyInfoIndex } ::= { invSoftkeyInfoTable 1 } InvSoftkeyInfoEntry ::= SEQUENCE { invSoftkeyInfoIndex Integer32, invSoftkeyInfoNEAddress IpAddress, invSoftkeySerialNo DisplayString, invSupportabilityInfoFw OCTET STRING, invSupportabilityInfoKey OCTET STRING, invSupportabilityInfoValid OCTET STRING, invCapa10MaxE1Rst OCTET STRING, invCapa20MaxE1Rst OCTET STRING, invCapa50MaxE1Rst OCTET STRING, invCapa100MaxE1Rst OCTET STRING, invCapa150MaxE1Rst OCTET STRING, invCapa200MaxE1Rst OCTET STRING, invCapa300MaxE1Rst OCTET STRING, invCapa400MaxE1Rst OCTET STRING, invSoftkeyEquipmentSerialNo DisplayString } invSoftkeyInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invSoftkeyInfoEntry 1 } invSoftkeyInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invSoftkeyInfoEntry 2 } invSoftkeySerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software Key Serial No." ::= { invSoftkeyInfoEntry 3 } invSupportabilityInfoFw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32..32|40..40|52..52|68..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "Supportability (Firmware)" ::= { invSoftkeyInfoEntry 4 } invSupportabilityInfoKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32..32|40..40|52..52|68..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "Supportability (Software Key)" ::= { invSoftkeyInfoEntry 5 } invSupportabilityInfoValid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32..32|40..40|52..52|68..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "Supportability (Current)" ::= { invSoftkeyInfoEntry 6 } invCapa10MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 10M Capacity." ::= { invSoftkeyInfoEntry 7 } invCapa20MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 20M Capacity." ::= { invSoftkeyInfoEntry 8 } invCapa50MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 50M Capacity." ::= { invSoftkeyInfoEntry 9 } invCapa100MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 100M Capacity." ::= { invSoftkeyInfoEntry 10 } invCapa150MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 150M Capacity." ::= { invSoftkeyInfoEntry 11 } invCapa200MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 200M Capacity." ::= { invSoftkeyInfoEntry 12 } invCapa300MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 300M Capacity." ::= { invSoftkeyInfoEntry 13 } invCapa400MaxE1Rst OBJECT-TYPE SYNTAX OCTET STRING (SIZE(160..160|192..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Available E1/RST Connections for 400M Capacity." ::= { invSoftkeyInfoEntry 14 } invSoftkeyEquipmentSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment Serial Number." ::= { invSoftkeyInfoEntry 15 } invClk2mInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvClk2mInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - Main Board / Ctrl Card (EXT CLK)" ::= { inventoryGroup 7 } invClk2mInfoEntry OBJECT-TYPE SYNTAX InvClk2mInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invClk2mInfoIndex } ::= { invClk2mInfoTable 1 } InvClk2mInfoEntry ::= SEQUENCE { invClk2mInfoIndex INTEGER, invClk2mInfoNEAddress IpAddress, invClk2mCardName DisplayString, invClk2mCardCodeNo DisplayString, invClk2mCardSerialNo DisplayString, invClk2mCardManufacturedDate DisplayString, invClk2mFPGAName DisplayString, invClk2mFPGACodeNo DisplayString, invClk2mFPGAHardVersion DisplayString, invClk2mCardHardVersion DisplayString } invClk2mInfoIndex OBJECT-TYPE SYNTAX INTEGER { extclk(1), extclk2(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invClk2mInfoEntry 1 } invClk2mInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invClk2mInfoEntry 2 } invClk2mCardName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name" ::= { invClk2mInfoEntry 3 } invClk2mCardCodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Code No." ::= { invClk2mInfoEntry 4 } invClk2mCardSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial No." ::= { invClk2mInfoEntry 5 } invClk2mCardManufacturedDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufactured Date" ::= { invClk2mInfoEntry 6 } invClk2mFPGAName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Name" ::= { invClk2mInfoEntry 7 } invClk2mFPGACodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Code No." ::= { invClk2mInfoEntry 8 } invClk2mFPGAHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Version." ::= { invClk2mInfoEntry 9 } invClk2mCardHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Version." ::= { invClk2mInfoEntry 10 } invMacAddressInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvMacAddressInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information - Mac Address Information" ::= { inventoryGroup 8 } invMacAddressInfoEntry OBJECT-TYPE SYNTAX InvMacAddressInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invMacAddressInfoIfIndex } ::= { invMacAddressInfoTable 1 } InvMacAddressInfoEntry ::= SEQUENCE { invMacAddressInfoIfIndex InterfaceIndex, invMacAddressInfoNEAddress IpAddress, invMacAddress MacAddress } invMacAddressInfoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invMacAddressInfoEntry 1 } invMacAddressInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invMacAddressInfoEntry 2 } invMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address which assigned to that port." ::= { invMacAddressInfoEntry 3 } invModemParamInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvModemParamInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - MODEM Parameter" ::= { inventoryGroup 9 } invModemParamInfoEntry OBJECT-TYPE SYNTAX InvModemParamInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invModemParamInfoIfIndex } ::= { invModemParamInfoTable 1 } InvModemParamInfoEntry ::= SEQUENCE { invModemParamInfoIfIndex InterfaceIndex, invModemParamInfoNEAddress IpAddress, invModemParamVersion DisplayString } invModemParamInfoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invModemParamInfoEntry 1 } invModemParamInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invModemParamInfoEntry 2 } invModemParamVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Parameter Information MIB format of invModemParamVersion is xx.yy." ::= { invModemParamInfoEntry 3 } invChassisInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InvChassisInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Equipment Inventory Information (IDU) - Chassis" ::= { inventoryGroup 10 } invChassisInfoEntry OBJECT-TYPE SYNTAX InvChassisInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { invChassisInfoIndex } ::= { invChassisInfoTable 1 } InvChassisInfoEntry ::= SEQUENCE { invChassisInfoIndex Integer32, invChassisInfoNEAddress IpAddress, invChassisName DisplayString, invChassisCodeNo DisplayString, invChassisSerialNo DisplayString, invChassisManufacturedDate DisplayString, invChassisFirmVersion DisplayString, invChassisHardVersion DisplayString } invChassisInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { invChassisInfoEntry 1 } invChassisInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { invChassisInfoEntry 2 } invChassisName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name" ::= { invChassisInfoEntry 3 } invChassisCodeNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Code No." ::= { invChassisInfoEntry 4 } invChassisSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Serial No. Note: For VR 2, this object cannot be modified, acting as read-only object." ::= { invChassisInfoEntry 5 } invChassisManufacturedDate OBJECT-TYPE SYNTAX DisplayString (SIZE(1..7)) MAX-ACCESS read-write STATUS current DESCRIPTION "Manufactured Date Note: For VR 2, this object cannot be modified, acting as read-only object." ::= { invChassisInfoEntry 6 } invChassisFirmVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware Version" ::= { invChassisInfoEntry 7 } invChassisHardVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Version" ::= { invChassisInfoEntry 8 } meteringTable OBJECT-TYPE SYNTAX SEQUENCE OF MeteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MODEM TX / RX Metering Table." ::= { meteringGroup 1 } meteringEntry OBJECT-TYPE SYNTAX MeteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { meteringIfIndex } ::= { meteringTable 1 } MeteringEntry ::= SEQUENCE { meteringIfIndex InterfaceIndex, meteringNEAddress IpAddress, metSysTxPowerStatus ValidInvalidValue, metSysTxPowerValue DisplayString, metSysRxLevelStatus ValidInvalidValue, metSysRxLevelValue DisplayString, metSysPSVoltageStatus ValidInvalidValue, metSysPSVoltageValue DisplayString, metSysTempODUStatus ValidInvalidValue, metSysTempODUValue DisplayString, metSysTempIDUStatus ValidInvalidValue, metSysTempIDUValue DisplayString, metSysBitErrorRateStatus Integer32, metSysBitErrorRateValue DisplayString } meteringIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { meteringEntry 1 } meteringNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { meteringEntry 2 } metSysTxPowerStatus OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TX Power Status." ::= { meteringEntry 3 } metSysTxPowerValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM TX Power" ::= { meteringEntry 4 } metSysRxLevelStatus OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM RX Power Status" ::= { meteringEntry 5 } metSysRxLevelValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM RX Power" ::= { meteringEntry 6 } metSysPSVoltageStatus OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM ODU Power Supply Status" ::= { meteringEntry 7 } metSysPSVoltageValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM ODU Power Supply" ::= { meteringEntry 8 } metSysTempODUStatus OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM ODU Temperature Status" ::= { meteringEntry 9 } metSysTempODUValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM ODU Temperature" ::= { meteringEntry 10 } metSysTempIDUStatus OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "IDU Temperature Status" ::= { meteringEntry 11 } metSysTempIDUValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IDU Temperature" ::= { meteringEntry 12 } metSysBitErrorRateStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM BER Status" ::= { meteringEntry 13 } metSysBitErrorRateValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MODEM BER" ::= { meteringEntry 14 } meteringFanTable OBJECT-TYPE SYNTAX SEQUENCE OF MeteringFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FAN Metering Table." ::= { meteringGroup 3 } meteringFanEntry OBJECT-TYPE SYNTAX MeteringFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { meteringFanSlotIndex } ::= { meteringFanTable 1 } MeteringFanEntry ::= SEQUENCE { meteringFanSlotIndex Integer32, meteringFanNEAddress IpAddress, meteringFanSpeed1 DisplayString, meteringFanSpeed1Status ValidInvalidValue, meteringFanSpeed2 DisplayString, meteringFanSpeed2Status ValidInvalidValue, meteringFanSpeed3 DisplayString, meteringFanSpeed3Status ValidInvalidValue } meteringFanSlotIndex OBJECT-TYPE SYNTAX Integer32 (8..8|22..23) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { meteringFanEntry 1 } meteringFanNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { meteringFanEntry 2 } meteringFanSpeed1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FAN1 Rotation Speed" ::= { meteringFanEntry 3 } meteringFanSpeed1Status OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "FAN1 Rotation Speed Status" ::= { meteringFanEntry 4 } meteringFanSpeed2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FAN2 Rotation Speed" ::= { meteringFanEntry 5 } meteringFanSpeed2Status OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "FAN2 Rotation Speed Status" ::= { meteringFanEntry 6 } meteringFanSpeed3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FAN3 Rotation Speed" ::= { meteringFanEntry 7 } meteringFanSpeed3Status OBJECT-TYPE SYNTAX ValidInvalidValue MAX-ACCESS read-only STATUS current DESCRIPTION "FAN3 Rotation Speed Status" ::= { meteringFanEntry 8 } ----------------------------------------------- -- pmonGroup Definitions ----------------------------------------------- pmon15minDataRadioGroup OBJECT IDENTIFIER ::= { pmonGroup 1 } pmon15minDataRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON MODEM 15min RF Monitoring Table" ::= { pmon15minDataRadioGroup 1 } pmon15minDataRadioEntry OBJECT-TYPE SYNTAX Pmon15minDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minDataModemIfIndex, pmon15minDataModemMonitorName } ::= { pmon15minDataRadioTable 1 } Pmon15minDataRadioEntry ::= SEQUENCE { pmon15minDataModemIfIndex InterfaceIndex, pmon15minDataModemMonitorName INTEGER, pmon15minDataRadioNEAddress IpAddress, pmon15minDataModemStatusInfo IpeStatsInfo, pmon15minDataRfValue Integer32 } pmon15minDataModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minDataRadioEntry 1 } pmon15minDataModemMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item." ::= { pmon15minDataRadioEntry 2 } pmon15minDataRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minDataRadioEntry 3 } pmon15minDataModemStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON MODEM 15min RF Monitoring Status" ::= { pmon15minDataRadioEntry 4 } pmon15minDataRfValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON MODEM 15min RF Monitoring Value" ::= { pmon15minDataRadioEntry 5 } pmon15minDataCableGroup OBJECT IDENTIFIER ::= { pmonGroup 2 } pmon15minDataThroughModeGroup OBJECT IDENTIFIER ::= { pmon15minDataCableGroup 1 } pmon15minDataTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) RS Monitoring Table" ::= { pmon15minDataThroughModeGroup 1 } pmon15minDataTmRsEntry OBJECT-TYPE SYNTAX Pmon15minDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minDataTmRsIfIndex, pmon15minDataTmRsMonitorName } ::= { pmon15minDataTmRsTable 1 } Pmon15minDataTmRsEntry ::= SEQUENCE { pmon15minDataTmRsIfIndex InterfaceIndex, pmon15minDataTmRsMonitorName INTEGER, pmon15minDataTmRsNEAddress IpAddress, pmon15minDataTmRsStatusInfo IpeStatsInfo, pmon15minDataTmRsValue Integer32 } pmon15minDataTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minDataTmRsEntry 1 } pmon15minDataTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "index of this table. The value represents the monitoring item." ::= { pmon15minDataTmRsEntry 2 } pmon15minDataTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minDataTmRsEntry 3 } pmon15minDataTmRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) RS Monitoring Status." ::= { pmon15minDataTmRsEntry 4 } pmon15minDataTmRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) RS Monitoring Status" ::= { pmon15minDataTmRsEntry 5 } pmon15minDataTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) DMR RS Monitoring Table" ::= { pmon15minDataThroughModeGroup 2 } pmon15minDataTmDMRRsEntry OBJECT-TYPE SYNTAX Pmon15minDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minDataTmDMRRsIfIndex, pmon15minDataTmDMRRsMonitorName } ::= { pmon15minDataTmDMRRsTable 1 } Pmon15minDataTmDMRRsEntry ::= SEQUENCE { pmon15minDataTmDMRRsIfIndex InterfaceIndex, pmon15minDataTmDMRRsMonitorName INTEGER, pmon15minDataTmDMRRsNEAddress IpAddress, pmon15minDataTmDMRRsStatusInfo IpeStatsInfo, pmon15minDataTmDMRRsValue Integer32 } pmon15minDataTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minDataTmDMRRsEntry 1 } pmon15minDataTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item." ::= { pmon15minDataTmDMRRsEntry 2 } pmon15minDataTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minDataTmDMRRsEntry 3 } pmon15minDataTmDMRRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) DMR RS Monitoring Status" ::= { pmon15minDataTmDMRRsEntry 4 } pmon15minDataTmDMRRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Through Mode) DMR RS Monitoring Value" ::= { pmon15minDataTmDMRRsEntry 5 } pmon15minDataChannelizedModeGroup OBJECT IDENTIFIER ::= { pmon15minDataCableGroup 2 } pmon15minDataChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) RS Monitoring Table" ::= { pmon15minDataChannelizedModeGroup 1 } pmon15minDataChRsEntry OBJECT-TYPE SYNTAX Pmon15minDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minDataChRsIfIndex, pmon15minDataChRsMonitorName } ::= { pmon15minDataChRsTable 1 } Pmon15minDataChRsEntry ::= SEQUENCE { pmon15minDataChRsIfIndex InterfaceIndex, pmon15minDataChRsMonitorName INTEGER, pmon15minDataChRsNEAddress IpAddress, pmon15minDataChRsStatusInfo IpeStatsInfo, pmon15minDataChRsValue Integer32 } pmon15minDataChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minDataChRsEntry 1 } pmon15minDataChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item." ::= { pmon15minDataChRsEntry 2 } pmon15minDataChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minDataChRsEntry 3 } pmon15minDataChRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) RS Monitoring Status" ::= { pmon15minDataChRsEntry 4 } pmon15minDataChRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) RS Monitoring Value" ::= { pmon15minDataChRsEntry 5 } pmon15minDataChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) MS Monitoring Table." ::= { pmon15minDataChannelizedModeGroup 2 } pmon15minDataChMsEntry OBJECT-TYPE SYNTAX Pmon15minDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minDataChMsIfIndex, pmon15minDataChMsMonitorName } ::= { pmon15minDataChMsTable 1 } Pmon15minDataChMsEntry ::= SEQUENCE { pmon15minDataChMsIfIndex InterfaceIndex, pmon15minDataChMsMonitorName INTEGER, pmon15minDataChMsNEAddress IpAddress, pmon15minDataChMsStatusInfo IpeStatsInfo, pmon15minDataChMsValue Integer32 } pmon15minDataChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minDataChMsEntry 1 } pmon15minDataChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEP(4), pmonUAS(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon15minDataChMsEntry 2 } pmon15minDataChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minDataChMsEntry 3 } pmon15minDataChMsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) MS Monitoring Status." ::= { pmon15minDataChMsEntry 4 } pmon15minDataChMsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 15min (Channelized Mode) MS Monitoring Value" ::= { pmon15minDataChMsEntry 5 } pmon15minData16E1Group OBJECT IDENTIFIER ::= { pmon15minDataCableGroup 3 } pmon15minData16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon15minData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON E1 15min Monitoring Table" ::= { pmon15minData16E1Group 1 } pmon15minData16E1PdhEntry OBJECT-TYPE SYNTAX Pmon15minData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon15minData16E1PdhIfIndex, pmon15minData16E1PdhMonitorName } ::= { pmon15minData16E1PdhTable 1 } Pmon15minData16E1PdhEntry ::= SEQUENCE { pmon15minData16E1PdhIfIndex InterfaceIndex, pmon15minData16E1PdhMonitorName INTEGER, pmon15minData16E1PdhNEAddress IpAddress, pmon15minData16E1PdhStatusInfo IpeStatsInfo, pmon15minData16E1PdhValue Counter32 } pmon15minData16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon15minData16E1PdhEntry 1 } pmon15minData16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonCV(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon15minData16E1PdhEntry 2 } pmon15minData16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon15minData16E1PdhEntry 3 } pmon15minData16E1PdhStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON E1 15min Monitoring Status" ::= { pmon15minData16E1PdhEntry 4 } pmon15minData16E1PdhValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON E1 15min Monitoring Value" ::= { pmon15minData16E1PdhEntry 5 } pmon1dayDataRadioGroup OBJECT IDENTIFIER ::= { pmonGroup 3 } pmon1dayDataRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON MODEM 1 day RF Monitoring Table" ::= { pmon1dayDataRadioGroup 1 } pmon1dayDataRadioEntry OBJECT-TYPE SYNTAX Pmon1dayDataRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayDataModemIfIndex, pmon1dayDataModemMonitorName } ::= { pmon1dayDataRadioTable 1 } Pmon1dayDataRadioEntry ::= SEQUENCE { pmon1dayDataModemIfIndex InterfaceIndex, pmon1dayDataModemMonitorName INTEGER, pmon1dayDataRadioNEAddress IpAddress, pmon1dayDataModemStatusInfo IpeStatsInfo, pmon1dayDataRfValue Integer32 } pmon1dayDataModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayDataRadioEntry 1 } pmon1dayDataModemMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon1dayDataRadioEntry 2 } pmon1dayDataRadioNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayDataRadioEntry 3 } pmon1dayDataModemStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON MODEM 1 day RF Monitoring Status." ::= { pmon1dayDataRadioEntry 4 } pmon1dayDataRfValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON MODEM 1 day RF Monitoring Value" ::= { pmon1dayDataRadioEntry 5 } pmon1dayDataCableGroup OBJECT IDENTIFIER ::= { pmonGroup 4 } pmon1dayDataThroughModeGroup OBJECT IDENTIFIER ::= { pmon1dayDataCableGroup 1 } pmon1dayDataTmRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) RS Monitoring Table" ::= { pmon1dayDataThroughModeGroup 1 } pmon1dayDataTmRsEntry OBJECT-TYPE SYNTAX Pmon1dayDataTmRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayDataTmRsIfIndex, pmon1dayDataTmRsMonitorName } ::= { pmon1dayDataTmRsTable 1 } Pmon1dayDataTmRsEntry ::= SEQUENCE { pmon1dayDataTmRsIfIndex InterfaceIndex, pmon1dayDataTmRsMonitorName INTEGER, pmon1dayDataTmRsNEAddress IpAddress, pmon1dayDataTmRsStatusInfo IpeStatsInfo, pmon1dayDataTmRsValue Integer32 } pmon1dayDataTmRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayDataTmRsEntry 1 } pmon1dayDataTmRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon1dayDataTmRsEntry 2 } pmon1dayDataTmRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayDataTmRsEntry 3 } pmon1dayDataTmRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) RS Monitoring Status" ::= { pmon1dayDataTmRsEntry 4 } pmon1dayDataTmRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) RS Monitoring Value" ::= { pmon1dayDataTmRsEntry 5 } pmon1dayDataTmDMRRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) DMR RS Monitoring Table" ::= { pmon1dayDataThroughModeGroup 2 } pmon1dayDataTmDMRRsEntry OBJECT-TYPE SYNTAX Pmon1dayDataTmDMRRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayDataTmDMRRsIfIndex, pmon1dayDataTmDMRRsMonitorName } ::= { pmon1dayDataTmDMRRsTable 1 } Pmon1dayDataTmDMRRsEntry ::= SEQUENCE { pmon1dayDataTmDMRRsIfIndex InterfaceIndex, pmon1dayDataTmDMRRsMonitorName INTEGER, pmon1dayDataTmDMRRsNEAddress IpAddress, pmon1dayDataTmDMRRsStatusInfo IpeStatsInfo, pmon1dayDataTmDMRRsValue Integer32 } pmon1dayDataTmDMRRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayDataTmDMRRsEntry 1 } pmon1dayDataTmDMRRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item." ::= { pmon1dayDataTmDMRRsEntry 2 } pmon1dayDataTmDMRRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayDataTmDMRRsEntry 3 } pmon1dayDataTmDMRRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) DMR RS Monitoring Status" ::= { pmon1dayDataTmDMRRsEntry 4 } pmon1dayDataTmDMRRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Through Mode) DMR RS Monitoring Value" ::= { pmon1dayDataTmDMRRsEntry 5 } pmon1dayDataChannelizedModeGroup OBJECT IDENTIFIER ::= { pmon1dayDataCableGroup 2 } pmon1dayDataChRsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) RS Monitoring Table" ::= { pmon1dayDataChannelizedModeGroup 1 } pmon1dayDataChRsEntry OBJECT-TYPE SYNTAX Pmon1dayDataChRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayDataChRsIfIndex, pmon1dayDataChRsMonitorName } ::= { pmon1dayDataChRsTable 1 } Pmon1dayDataChRsEntry ::= SEQUENCE { pmon1dayDataChRsIfIndex InterfaceIndex, pmon1dayDataChRsMonitorName INTEGER, pmon1dayDataChRsNEAddress IpAddress, pmon1dayDataChRsStatusInfo IpeStatsInfo, pmon1dayDataChRsValue Integer32 } pmon1dayDataChRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayDataChRsEntry 1 } pmon1dayDataChRsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEF(4), pmonUAS(5), pmonOFS(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon1dayDataChRsEntry 2 } pmon1dayDataChRsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayDataChRsEntry 3 } pmon1dayDataChRsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) RS Monitoring Status" ::= { pmon1dayDataChRsEntry 4 } pmon1dayDataChRsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) RS Monitoring Value" ::= { pmon1dayDataChRsEntry 5 } pmon1dayDataChMsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) MS Monitoring Table" ::= { pmon1dayDataChannelizedModeGroup 2 } pmon1dayDataChMsEntry OBJECT-TYPE SYNTAX Pmon1dayDataChMsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayDataChMsIfIndex, pmon1dayDataChMsMonitorName } ::= { pmon1dayDataChMsTable 1 } Pmon1dayDataChMsEntry ::= SEQUENCE { pmon1dayDataChMsIfIndex InterfaceIndex, pmon1dayDataChMsMonitorName INTEGER, pmon1dayDataChMsNEAddress IpAddress, pmon1dayDataChMsStatusInfo IpeStatsInfo, pmon1dayDataChMsValue Integer32 } pmon1dayDataChMsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayDataChMsEntry 1 } pmon1dayDataChMsMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonBBE(1), pmonES(2), pmonSES(3), pmonSEP(4), pmonUAS(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item" ::= { pmon1dayDataChMsEntry 2 } pmon1dayDataChMsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayDataChMsEntry 3 } pmon1dayDataChMsStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) MS Monitoring Status" ::= { pmon1dayDataChMsEntry 4 } pmon1dayDataChMsValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON STM-1 1day (Channelized Mode) MS Monitoring Value" ::= { pmon1dayDataChMsEntry 5 } pmon1dayData16E1Group OBJECT IDENTIFIER ::= { pmon1dayDataCableGroup 3 } pmon1dayData16E1PdhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmon1dayData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON E1 1day Monitoring Table" ::= { pmon1dayData16E1Group 1 } pmon1dayData16E1PdhEntry OBJECT-TYPE SYNTAX Pmon1dayData16E1PdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmon1dayData16E1PdhIfIndex, pmon1dayData16E1PdhMonitorName } ::= { pmon1dayData16E1PdhTable 1 } Pmon1dayData16E1PdhEntry ::= SEQUENCE { pmon1dayData16E1PdhIfIndex InterfaceIndex, pmon1dayData16E1PdhMonitorName INTEGER, pmon1dayData16E1PdhNEAddress IpAddress, pmon1dayData16E1PdhStatusInfo IpeStatsInfo, pmon1dayData16E1PdhValue Counter32 } pmon1dayData16E1PdhIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmon1dayData16E1PdhEntry 1 } pmon1dayData16E1PdhMonitorName OBJECT-TYPE SYNTAX INTEGER { pmonCV(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table. The value represents the monitoring item." ::= { pmon1dayData16E1PdhEntry 2 } pmon1dayData16E1PdhNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmon1dayData16E1PdhEntry 3 } pmon1dayData16E1PdhStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON E1 1day Monitoring Status" ::= { pmon1dayData16E1PdhEntry 4 } pmon1dayData16E1PdhValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "PMON E1 1day Monitoring Value" ::= { pmon1dayData16E1PdhEntry 5 } pmonTxRxLev15minCurrentDataTable OBJECT-TYPE SYNTAX SEQUENCE OF PmonTxRxLev15minCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON ODU 15min Tx/RX Level Monitoring Table" ::= { pmonTxRxLevGroup 1 } pmonTxRxLev15minCurrentDataEntry OBJECT-TYPE SYNTAX PmonTxRxLev15minCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmonTxRxLev15minCurrentDataIfIndex } ::= { pmonTxRxLev15minCurrentDataTable 1 } PmonTxRxLev15minCurrentDataEntry ::= SEQUENCE { pmonTxRxLev15minCurrentDataIfIndex InterfaceIndex, pmonTxRxLev15minCurrentDataNEAddress IpAddress, pmonTxRxLev15minCurrentDataStatusInfo IpeStatsInfo, pmonTxRxLev15minRxLevelMaxCurrentData DisplayString, pmonTxRxLev15minRxLevelMinCurrentData DisplayString } pmonTxRxLev15minCurrentDataIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmonTxRxLev15minCurrentDataEntry 1 } pmonTxRxLev15minCurrentDataNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmonTxRxLev15minCurrentDataEntry 2 } pmonTxRxLev15minCurrentDataStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 15min RX Level Status" ::= { pmonTxRxLev15minCurrentDataEntry 3 } pmonTxRxLev15minRxLevelMaxCurrentData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 15min RX Level (MAX)" ::= { pmonTxRxLev15minCurrentDataEntry 4 } pmonTxRxLev15minRxLevelMinCurrentData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 15min RX Level (MIN)" ::= { pmonTxRxLev15minCurrentDataEntry 5 } pmonTxRxLev1dayCurrentDataTable OBJECT-TYPE SYNTAX SEQUENCE OF PmonTxRxLev1dayCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PMON ODU 1day Tx/RX Level Monitoring Table" ::= { pmonTxRxLevGroup 2 } pmonTxRxLev1dayCurrentDataEntry OBJECT-TYPE SYNTAX PmonTxRxLev1dayCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { pmonTxRxLev1dayCurrentDataIfIndex } ::= { pmonTxRxLev1dayCurrentDataTable 1 } PmonTxRxLev1dayCurrentDataEntry ::= SEQUENCE { pmonTxRxLev1dayCurrentDataIfIndex InterfaceIndex, pmonTxRxLev1dayCurrentDataNEAddress IpAddress, pmonTxRxLev1dayCurrentDataStatusInfo IpeStatsInfo, pmonTxRxLev1dayRxLevelMaxCurrentData DisplayString, pmonTxRxLev1dayRxLevelMinCurrentData DisplayString } pmonTxRxLev1dayCurrentDataIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { pmonTxRxLev1dayCurrentDataEntry 1 } pmonTxRxLev1dayCurrentDataNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { pmonTxRxLev1dayCurrentDataEntry 2 } pmonTxRxLev1dayCurrentDataStatusInfo OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 1day RX Level Status" ::= { pmonTxRxLev1dayCurrentDataEntry 3 } pmonTxRxLev1dayRxLevelMaxCurrentData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 1day RX Level (MAX)" ::= { pmonTxRxLev1dayCurrentDataEntry 4 } pmonTxRxLev1dayRxLevelMinCurrentData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PMON ODU 1day RX Level (MIN)" ::= { pmonTxRxLev1dayCurrentDataEntry 5 } ----------------------------------------------- -- rmonGroup Definitions ----------------------------------------------- rmonEthGroup OBJECT IDENTIFIER ::= { rmonGroup 1 } rmon15minPortGroup OBJECT IDENTIFIER ::= { rmonEthGroup 1 } rmon15minPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon15minPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 15min Port Monitoring Table." ::= { rmon15minPortGroup 1 } rmon15minPortEntry OBJECT-TYPE SYNTAX Rmon15minPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon15minIfIndex } ::= { rmon15minPortTable 1 } Rmon15minPortEntry ::= SEQUENCE { rmon15minIfIndex InterfaceIndex, rmon15minNEAddress IpAddress, rmon15minHCRxEthStatsOctets Counter64, rmon15minHCRxEthStatsOctetsStatusInfo INTEGER, rmon15minHCTxEthStatsOctets Counter64, rmon15minHCTxEthStatsOctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts Counter32, rmon15minRxEthStatsPktsStatusInfo INTEGER, rmon15minTxEthStatsPkts Counter32, rmon15minTxEthStatsPktsStatusInfo INTEGER, rmon15minRxEthStatsDropEvents Counter32, rmon15minRxEthStatsDropEventsStatusInfo INTEGER, rmon15minRxEthStatsUndersizePkts Counter32, rmon15minRxEthStatsUndersizePktsStatusInfo INTEGER, rmon15minRxEthStatsFragments Counter32, rmon15minRxEthStatsFragmentsStatusInfo INTEGER, rmon15minRxEthStatsPkts64Octets Counter32, rmon15minRxEthStatsPkts64OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts64Octets Counter32, rmon15minTxEthStatsPkts64OctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts65to127Octets Counter32, rmon15minRxEthStatsPkts65to127OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts65to127Octets Counter32, rmon15minTxEthStatsPkts65to127OctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts128to255Octets Counter32, rmon15minRxEthStatsPkts128to255OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts128to255Octets Counter32, rmon15minTxEthStatsPkts128to255OctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts256to511Octets Counter32, rmon15minRxEthStatsPkts256to511OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts256to511Octets Counter32, rmon15minTxEthStatsPkts256to511OctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts512to1023Octets Counter32, rmon15minRxEthStatsPkts512to1023OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts512to1023Octets Counter32, rmon15minTxEthStatsPkts512to1023OctetsStatusInfo INTEGER, rmon15minRxEthStatsPkts1024to1518Octets Counter32, rmon15minRxEthStatsPkts1024to1518OctetsStatusInfo INTEGER, rmon15minTxEthStatsPkts1024to1518Octets Counter32, rmon15minTxEthStatsPkts1024to1518OctetsStatusInfo INTEGER, rmon15minRxEthStatsCRCAlignErrors Counter32, rmon15minRxEthStatsCRCAlignErrorsStatusInfo INTEGER, rmon15minRxEthStatsOversizePkts Counter32, rmon15minRxEthStatsOversizePktsStatusInfo INTEGER, rmon15minRxEthStatsJabbers Counter32, rmon15minRxEthStatsJabbersStatusInfo INTEGER, rmon15minRxEthStatsMulticastPkts Counter32, rmon15minRxEthStatsMulticastPktsStatusInfo INTEGER, rmon15minTxEthStatsMulticastPkts Counter32, rmon15minTxEthStatsMulticastPktsStatusInfo INTEGER, rmon15minRxEthStatsBroadcastPkts Counter32, rmon15minRxEthStatsBroadcastPktsStatusInfo INTEGER, rmon15minTxEthStatsBroadcastPkts Counter32, rmon15minTxEthStatsBroadcastPktsStatusInfo INTEGER, rmon15minTxEthStatsCollisions Counter32, rmon15minTxEthStatsCollisionsStatusInfo INTEGER, rmon15minHCRxUnknownTPID Counter64, rmon15minHCRxUnknownTPIDStatusInfo INTEGER, rmon15minHCRxUnknownVID Counter64, rmon15minHCRxUnknownVIDStatusInfo INTEGER, rmon15minHCRxMAClimit Counter64, rmon15minHCRxMAClimitStatusInfo INTEGER, rmon15minHCRxFilterDiscard Counter64, rmon15minHCRxFilterDiscardStatusInfo INTEGER, rmon15minHCRxQoSDiscard Counter64, rmon15minHCRxQoSDiscardStatusInfo INTEGER, rmon15minHCTxQueue0Discard Counter64, rmon15minHCTxQueue0DiscardStatusInfo INTEGER, rmon15minHCTxQueue1Discard Counter64, rmon15minHCTxQueue1DiscardStatusInfo INTEGER, rmon15minHCTxQueue2Discard Counter64, rmon15minHCTxQueue2DiscardStatusInfo INTEGER, rmon15minHCTxQueue3Discard Counter64, rmon15minHCTxQueue3DiscardStatusInfo INTEGER, rmon15minHCTxQueue4Discard Counter64, rmon15minHCTxQueue4DiscardStatusInfo INTEGER, rmon15minHCTxQueue5Discard Counter64, rmon15minHCTxQueue5DiscardStatusInfo INTEGER, rmon15minHCTxQueue6Discard Counter64, rmon15minHCTxQueue6DiscardStatusInfo INTEGER, rmon15minHCTxQueue7Discard Counter64, rmon15minHCTxQueue7DiscardStatusInfo INTEGER, rmon15minTxEthStatsOversizePkts Counter32, rmon15minTxEthStatsOversizePktsStatusInfo INTEGER } rmon15minIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon15minPortEntry 1 } rmon15minNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon15minPortEntry 2 } rmon15minHCRxEthStatsOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Octs" ::= { rmon15minPortEntry 3 } rmon15minHCRxEthStatsOctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 4 } rmon15minHCTxEthStatsOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Octs" ::= { rmon15minPortEntry 5 } rmon15minHCTxEthStatsOctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 6 } rmon15minRxEthStatsPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Pkts" ::= { rmon15minPortEntry 7 } rmon15minRxEthStatsPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 8 } rmon15minTxEthStatsPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Pkts" ::= { rmon15minPortEntry 9 } rmon15minTxEthStatsPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 10 } rmon15minRxEthStatsDropEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Drop Events" ::= { rmon15minPortEntry 11 } rmon15minRxEthStatsDropEventsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 12 } rmon15minRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Undersize Pkts" ::= { rmon15minPortEntry 13 } rmon15minRxEthStatsUndersizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 14 } rmon15minRxEthStatsFragments OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Fragments" ::= { rmon15minPortEntry 15 } rmon15minRxEthStatsFragmentsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 16 } rmon15minRxEthStatsPkts64Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 64 Octs" ::= { rmon15minPortEntry 17 } rmon15minRxEthStatsPkts64OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 18 } rmon15minTxEthStatsPkts64Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 64 Octs" ::= { rmon15minPortEntry 19 } rmon15minTxEthStatsPkts64OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 20 } rmon15minRxEthStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 65 to 127 Octs" ::= { rmon15minPortEntry 21 } rmon15minRxEthStatsPkts65to127OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 22 } rmon15minTxEthStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 65 to 127 Octs" ::= { rmon15minPortEntry 23 } rmon15minTxEthStatsPkts65to127OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 24 } rmon15minRxEthStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 128 to 255 Octs" ::= { rmon15minPortEntry 25 } rmon15minRxEthStatsPkts128to255OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 26 } rmon15minTxEthStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 128 to 255 Octs" ::= { rmon15minPortEntry 27 } rmon15minTxEthStatsPkts128to255OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 28 } rmon15minRxEthStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 256 to 511 Octs" ::= { rmon15minPortEntry 29 } rmon15minRxEthStatsPkts256to511OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 30 } rmon15minTxEthStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 256 to 511 Octs" ::= { rmon15minPortEntry 31 } rmon15minTxEthStatsPkts256to511OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 32 } rmon15minRxEthStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 512 to 1023 Octs" ::= { rmon15minPortEntry 33 } rmon15minRxEthStatsPkts512to1023OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 34 } rmon15minTxEthStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 512 to 1023 Octs" ::= { rmon15minPortEntry 35 } rmon15minTxEthStatsPkts512to1023OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 36 } rmon15minRxEthStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 1024 to 1518 Octs" ::= { rmon15minPortEntry 37 } rmon15minRxEthStatsPkts1024to1518OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 38 } rmon15minTxEthStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 1024 to 1518 Octs" ::= { rmon15minPortEntry 39 } rmon15minTxEthStatsPkts1024to1518OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 40 } rmon15minRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX CRC Alignment Errors" ::= { rmon15minPortEntry 41 } rmon15minRxEthStatsCRCAlignErrorsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 42 } rmon15minRxEthStatsOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Oversize Pkts" ::= { rmon15minPortEntry 43 } rmon15minRxEthStatsOversizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 44 } rmon15minRxEthStatsJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Jabbers" ::= { rmon15minPortEntry 45 } rmon15minRxEthStatsJabbersStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 46 } rmon15minRxEthStatsMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Multicast Pkts" ::= { rmon15minPortEntry 47 } rmon15minRxEthStatsMulticastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 48 } rmon15minTxEthStatsMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Multicast Pkts" ::= { rmon15minPortEntry 49 } rmon15minTxEthStatsMulticastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 50 } rmon15minRxEthStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Broadcast Pkts" ::= { rmon15minPortEntry 51 } rmon15minRxEthStatsBroadcastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 52 } rmon15minTxEthStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Broadcast Pkts" ::= { rmon15minPortEntry 53 } rmon15minTxEthStatsBroadcastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 54 } rmon15minTxEthStatsCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Collisions" ::= { rmon15minPortEntry 55 } rmon15minTxEthStatsCollisionsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Collisions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 56 } rmon15minHCRxUnknownTPID OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown TPID" ::= { rmon15minPortEntry 57 } rmon15minHCRxUnknownTPIDStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 58 } rmon15minHCRxUnknownVID OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown VID" ::= { rmon15minPortEntry 59 } rmon15minHCRxUnknownVIDStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 60 } rmon15minHCRxMAClimit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX MAC Limit" ::= { rmon15minPortEntry 61 } rmon15minHCRxMAClimitStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 62 } rmon15minHCRxFilterDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Filter Discard" ::= { rmon15minPortEntry 63 } rmon15minHCRxFilterDiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 64 } rmon15minHCRxQoSDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard" ::= { rmon15minPortEntry 65 } rmon15minHCRxQoSDiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 66 } rmon15minHCTxQueue0Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue0 Discard" ::= { rmon15minPortEntry 67 } rmon15minHCTxQueue0DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 68 } rmon15minHCTxQueue1Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue1 Discard" ::= { rmon15minPortEntry 69 } rmon15minHCTxQueue1DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 70 } rmon15minHCTxQueue2Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue2 Discard" ::= { rmon15minPortEntry 71 } rmon15minHCTxQueue2DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 72 } rmon15minHCTxQueue3Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue3 Discard" ::= { rmon15minPortEntry 73 } rmon15minHCTxQueue3DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 74 } rmon15minHCTxQueue4Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPortEntry 75 } rmon15minHCTxQueue4DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 76 } rmon15minHCTxQueue5Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPortEntry 77 } rmon15minHCTxQueue5DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 78 } rmon15minHCTxQueue6Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPortEntry 79 } rmon15minHCTxQueue6DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 80 } rmon15minHCTxQueue7Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPortEntry 81 } rmon15minHCTxQueue7DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 82 } rmon15minTxEthStatsOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Oversize Pkts." ::= { rmon15minPortEntry 83 } rmon15minTxEthStatsOversizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPortEntry 84 } rmon15minPort2Table OBJECT-TYPE SYNTAX SEQUENCE OF Rmon15minPort2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 15min Port Monitoring Table." ::= { rmon15minPortGroup 2 } rmon15minPort2Entry OBJECT-TYPE SYNTAX Rmon15minPort2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon15minPort2IfIndex } ::= { rmon15minPort2Table 1 } Rmon15minPort2Entry ::= SEQUENCE { rmon15minPort2IfIndex InterfaceIndex, rmon15minPort2NEAddress IpAddress, rmon15minHCRxEthStatsOctets2 Counter64, rmon15minHCRxEthStatsOctets2Status IpeStatsInfo, rmon15minHCTxEthStatsOctets2 Counter64, rmon15minHCTxEthStatsOctets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts2 Counter64, rmon15minHCRxEthStatsPkts2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts2 Counter64, rmon15minHCTxEthStatsPkts2Status IpeStatsInfo, rmon15minRxEthStatsDropEvents2 Counter32, rmon15minRxEthStatsDropEvents2Status IpeStatsInfo, rmon15minRxEthStatsUndersizePkts2 Counter32, rmon15minRxEthStatsUndersizePkts2Status IpeStatsInfo, rmon15minRxEthStatsFragments2 Counter32, rmon15minRxEthStatsFragments2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts64Octets2 Counter64, rmon15minHCRxEthStatsPkts64Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts64Octets2 Counter64, rmon15minHCTxEthStatsPkts64Octets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts65to127Octets2 Counter64, rmon15minHCRxEthStatsPkts65to127Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts65to127Octets2 Counter64, rmon15minHCTxEthStatsPkts65to127Octets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts128to255Octets2 Counter64, rmon15minHCRxEthStatsPkts128to255Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts128to255Octets2 Counter64, rmon15minHCTxEthStatsPkts128to255Octets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts256to511Octets2 Counter64, rmon15minHCRxEthStatsPkts256to511Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts256to511Octets2 Counter64, rmon15minHCTxEthStatsPkts256to511Octets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts512to1023Octets2 Counter64, rmon15minHCRxEthStatsPkts512to1023Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts512to1023Octets2 Counter64, rmon15minHCTxEthStatsPkts512to1023Octets2Status IpeStatsInfo, rmon15minHCRxEthStatsPkts1024to1518Octets2 Counter64, rmon15minHCRxEthStatsPkts1024to1518Octets2Status IpeStatsInfo, rmon15minHCTxEthStatsPkts1024to1518Octets2 Counter64, rmon15minHCTxEthStatsPkts1024to1518Octets2Status IpeStatsInfo, rmon15minRxEthStatsCRCAlignErrors2 Counter32, rmon15minRxEthStatsCRCAlignErrors2Status IpeStatsInfo, rmon15minRxEthStatsOversizePkts2 Counter32, rmon15minRxEthStatsOversizePkts2Status IpeStatsInfo, rmon15minRxEthStatsJabbers2 Counter32, rmon15minRxEthStatsJabbers2Status IpeStatsInfo, rmon15minRxEthStatsMulticastPkts2 Counter32, rmon15minRxEthStatsMulticastPkts2Status IpeStatsInfo, rmon15minTxEthStatsMulticastPkts2 Counter32, rmon15minTxEthStatsMulticastPkts2Status IpeStatsInfo, rmon15minRxEthStatsBroadcastPkts2 Counter32, rmon15minRxEthStatsBroadcastPkts2Status IpeStatsInfo, rmon15minTxEthStatsBroadcastPkts2 Counter32, rmon15minTxEthStatsBroadcastPkts2Status IpeStatsInfo, rmon15minTxEthStatsCollisions2 Counter32, rmon15minTxEthStatsCollisions2Status IpeStatsInfo, rmon15minHCRxUnknownTPID2 Counter64, rmon15minHCRxUnknownTPID2Status IpeStatsInfo, rmon15minHCRxUnknownVID2 Counter64, rmon15minHCRxUnknownVID2Status IpeStatsInfo, rmon15minHCRxMAClimit2 Counter64, rmon15minHCRxMAClimit2Status IpeStatsInfo, rmon15minHCRxFilterDiscard2 Counter64, rmon15minHCRxFilterDiscard2Status IpeStatsInfo, rmon15minHCRxQoSDiscard2 Counter64, rmon15minHCRxQoSDiscard2Status IpeStatsInfo, rmon15minHCTxQueue0Discard2 Counter64, rmon15minHCTxQueue0Discard2Status IpeStatsInfo, rmon15minHCTxQueue1Discard2 Counter64, rmon15minHCTxQueue1Discard2Status IpeStatsInfo, rmon15minHCTxQueue2Discard2 Counter64, rmon15minHCTxQueue2Discard2Status IpeStatsInfo, rmon15minHCTxQueue3Discard2 Counter64, rmon15minHCTxQueue3Discard2Status IpeStatsInfo, rmon15minHCTxQueue4Discard2 Counter64, rmon15minHCTxQueue4Discard2Status IpeStatsInfo, rmon15minHCTxQueue5Discard2 Counter64, rmon15minHCTxQueue5Discard2Status IpeStatsInfo, rmon15minHCTxQueue6Discard2 Counter64, rmon15minHCTxQueue6Discard2Status IpeStatsInfo, rmon15minHCTxQueue7Discard2 Counter64, rmon15minHCTxQueue7Discard2Status IpeStatsInfo, rmon15minTxEthStatsOversizePkts2 Counter32, rmon15minTxEthStatsOversizePkts2Status IpeStatsInfo } rmon15minPort2IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon15minPort2Entry 1 } rmon15minPort2NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon15minPort2Entry 2 } rmon15minHCRxEthStatsOctets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Octs" ::= { rmon15minPort2Entry 3 } rmon15minHCRxEthStatsOctets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 4 } rmon15minHCTxEthStatsOctets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Octs" ::= { rmon15minPort2Entry 5 } rmon15minHCTxEthStatsOctets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 6 } rmon15minHCRxEthStatsPkts2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Pkts" ::= { rmon15minPort2Entry 7 } rmon15minHCRxEthStatsPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 8 } rmon15minHCTxEthStatsPkts2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Pkts" ::= { rmon15minPort2Entry 9 } rmon15minHCTxEthStatsPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 10 } rmon15minRxEthStatsDropEvents2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Drop Events" ::= { rmon15minPort2Entry 11 } rmon15minRxEthStatsDropEvents2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 12 } rmon15minRxEthStatsUndersizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Undersize Pkts" ::= { rmon15minPort2Entry 13 } rmon15minRxEthStatsUndersizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 14 } rmon15minRxEthStatsFragments2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Fragments" ::= { rmon15minPort2Entry 15 } rmon15minRxEthStatsFragments2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 16 } rmon15minHCRxEthStatsPkts64Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 64 Octs" ::= { rmon15minPort2Entry 17 } rmon15minHCRxEthStatsPkts64Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 18 } rmon15minHCTxEthStatsPkts64Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 64 Octs" ::= { rmon15minPort2Entry 19 } rmon15minHCTxEthStatsPkts64Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 20 } rmon15minHCRxEthStatsPkts65to127Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 65 to 127 Octs" ::= { rmon15minPort2Entry 21 } rmon15minHCRxEthStatsPkts65to127Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 22 } rmon15minHCTxEthStatsPkts65to127Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 65 to 127 Octs" ::= { rmon15minPort2Entry 23 } rmon15minHCTxEthStatsPkts65to127Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 24 } rmon15minHCRxEthStatsPkts128to255Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 128 to 255 Octs" ::= { rmon15minPort2Entry 25 } rmon15minHCRxEthStatsPkts128to255Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 26 } rmon15minHCTxEthStatsPkts128to255Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 128 to 255 Octs" ::= { rmon15minPort2Entry 27 } rmon15minHCTxEthStatsPkts128to255Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 28 } rmon15minHCRxEthStatsPkts256to511Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 256 to 511 Octs" ::= { rmon15minPort2Entry 29 } rmon15minHCRxEthStatsPkts256to511Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 30 } rmon15minHCTxEthStatsPkts256to511Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 256 to 511 Octs" ::= { rmon15minPort2Entry 31 } rmon15minHCTxEthStatsPkts256to511Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 32 } rmon15minHCRxEthStatsPkts512to1023Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 512 to 1023 Octs" ::= { rmon15minPort2Entry 33 } rmon15minHCRxEthStatsPkts512to1023Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 34 } rmon15minHCTxEthStatsPkts512to1023Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 512 to 1023 Octs" ::= { rmon15minPort2Entry 35 } rmon15minHCTxEthStatsPkts512to1023Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 36 } rmon15minHCRxEthStatsPkts1024to1518Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 1024 to 1518 Octs" ::= { rmon15minPort2Entry 37 } rmon15minHCRxEthStatsPkts1024to1518Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 38 } rmon15minHCTxEthStatsPkts1024to1518Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 1024 to 1518 Octs" ::= { rmon15minPort2Entry 39 } rmon15minHCTxEthStatsPkts1024to1518Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 40 } rmon15minRxEthStatsCRCAlignErrors2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX CRC Alignment Errors" ::= { rmon15minPort2Entry 41 } rmon15minRxEthStatsCRCAlignErrors2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 42 } rmon15minRxEthStatsOversizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Oversize Pkts" ::= { rmon15minPort2Entry 43 } rmon15minRxEthStatsOversizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 44 } rmon15minRxEthStatsJabbers2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Jabbers" ::= { rmon15minPort2Entry 45 } rmon15minRxEthStatsJabbers2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 46 } rmon15minRxEthStatsMulticastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Multicast Pkts" ::= { rmon15minPort2Entry 47 } rmon15minRxEthStatsMulticastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 48 } rmon15minTxEthStatsMulticastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Multicast Pkts" ::= { rmon15minPort2Entry 49 } rmon15minTxEthStatsMulticastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 50 } rmon15minRxEthStatsBroadcastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Broadcast Pkts" ::= { rmon15minPort2Entry 51 } rmon15minRxEthStatsBroadcastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 52 } rmon15minTxEthStatsBroadcastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Broadcast Pkts" ::= { rmon15minPort2Entry 53 } rmon15minTxEthStatsBroadcastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 54 } rmon15minTxEthStatsCollisions2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Collisions" ::= { rmon15minPort2Entry 55 } rmon15minTxEthStatsCollisions2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Collisions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 56 } rmon15minHCRxUnknownTPID2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown TPID" ::= { rmon15minPort2Entry 57 } rmon15minHCRxUnknownTPID2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 58 } rmon15minHCRxUnknownVID2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown VID" ::= { rmon15minPort2Entry 59 } rmon15minHCRxUnknownVID2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 60 } rmon15minHCRxMAClimit2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX MAC Limit" ::= { rmon15minPort2Entry 61 } rmon15minHCRxMAClimit2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 62 } rmon15minHCRxFilterDiscard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Filter Discard" ::= { rmon15minPort2Entry 63 } rmon15minHCRxFilterDiscard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 64 } rmon15minHCRxQoSDiscard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard" ::= { rmon15minPort2Entry 65 } rmon15minHCRxQoSDiscard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 66 } rmon15minHCTxQueue0Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue0 Discard" ::= { rmon15minPort2Entry 67 } rmon15minHCTxQueue0Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 68 } rmon15minHCTxQueue1Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue1 Discard" ::= { rmon15minPort2Entry 69 } rmon15minHCTxQueue1Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 70 } rmon15minHCTxQueue2Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue2 Discard" ::= { rmon15minPort2Entry 71 } rmon15minHCTxQueue2Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 72 } rmon15minHCTxQueue3Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue3 Discard" ::= { rmon15minPort2Entry 73 } rmon15minHCTxQueue3Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 74 } rmon15minHCTxQueue4Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPort2Entry 75 } rmon15minHCTxQueue4Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 76 } rmon15minHCTxQueue5Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPort2Entry 77 } rmon15minHCTxQueue5Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 78 } rmon15minHCTxQueue6Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPort2Entry 79 } rmon15minHCTxQueue6Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 80 } rmon15minHCTxQueue7Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon15minPort2Entry 81 } rmon15minHCTxQueue7Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 82 } rmon15minTxEthStatsOversizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Oversize Pkts." ::= { rmon15minPort2Entry 83 } rmon15minTxEthStatsOversizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minPort2Entry 84 } rmon1dayportGroup OBJECT IDENTIFIER ::= { rmonEthGroup 2 } rmon1dayPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon1dayPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 1day Port Monitoring Table." ::= { rmon1dayportGroup 1 } rmon1dayPortEntry OBJECT-TYPE SYNTAX Rmon1dayPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon1dayIfIndex } ::= { rmon1dayPortTable 1 } Rmon1dayPortEntry ::= SEQUENCE { rmon1dayIfIndex InterfaceIndex, rmon1dayNEAddress IpAddress, rmon1dayHCRxEthStatsOctets Counter64, rmon1dayHCRxEthStatsOctetsStatusInfo INTEGER, rmon1dayHCTxEthStatsOctets Counter64, rmon1dayHCTxEthStatsOctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts Counter32, rmon1dayRxEthStatsPktsStatusInfo INTEGER, rmon1dayTxEthStatsPkts Counter32, rmon1dayTxEthStatsPktsStatusInfo INTEGER, rmon1dayRxEthStatsDropEvents Counter32, rmon1dayRxEthStatsDropEventsStatusInfo INTEGER, rmon1dayRxEthStatsUndersizePkts Counter32, rmon1dayRxEthStatsUndersizePktsStatusInfo INTEGER, rmon1dayRxEthStatsFragments Counter32, rmon1dayRxEthStatsFragmentsStatusInfo INTEGER, rmon1dayRxEthStatsPkts64Octets Counter32, rmon1dayRxEthStatsPkts64OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts64Octets Counter32, rmon1dayTxEthStatsPkts64OctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts65to127Octets Counter32, rmon1dayRxEthStatsPkts65to127OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts65to127Octets Counter32, rmon1dayTxEthStatsPkts65to127OctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts128to255Octets Counter32, rmon1dayRxEthStatsPkts128to255OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts128to255Octets Counter32, rmon1dayTxEthStatsPkts128to255OctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts256to511Octets Counter32, rmon1dayRxEthStatsPkts256to511OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts256to511Octets Counter32, rmon1dayTxEthStatsPkts256to511OctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts512to1023Octets Counter32, rmon1dayRxEthStatsPkts512to1023OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts512to1023Octets Counter32, rmon1dayTxEthStatsPkts512to1023OctetsStatusInfo INTEGER, rmon1dayRxEthStatsPkts1024to1518Octets Counter32, rmon1dayRxEthStatsPkts1024to1518OctetsStatusInfo INTEGER, rmon1dayTxEthStatsPkts1024to1518Octets Counter32, rmon1dayTxEthStatsPkts1024to1518OctetsStatusInfo INTEGER, rmon1dayRxEthStatsCRCAlignErrors Counter32, rmon1dayRxEthStatsCRCAlignErrorsStatusInfo INTEGER, rmon1dayRxEthStatsOversizePkts Counter32, rmon1dayRxEthStatsOversizePktsStatusInfo INTEGER, rmon1dayRxEthStatsJabbers Counter32, rmon1dayRxEthStatsJabbersStatusInfo INTEGER, rmon1dayRxEthStatsMulticastPkts Counter32, rmon1dayRxEthStatsMulticastPktsStatusInfo INTEGER, rmon1dayTxEthStatsMulticastPkts Counter32, rmon1dayTxEthStatsMulticastPktsStatusInfo INTEGER, rmon1dayRxEthStatsBroadcastPkts Counter32, rmon1dayRxEthStatsBroadcastPktsStatusInfo INTEGER, rmon1dayTxEthStatsBroadcastPkts Counter32, rmon1dayTxEthStatsBroadcastPktsStatusInfo INTEGER, rmon1dayTxEthStatsCollisions Counter32, rmon1dayTxEthStatsCollisionsStatusInfo INTEGER, rmon1dayHCRxUnknownTPID Counter64, rmon1dayHCRxUnknownTPIDStatusInfo INTEGER, rmon1dayHCRxUnknownVID Counter64, rmon1dayHCRxUnknownVIDStatusInfo INTEGER, rmon1dayHCRxMAClimit Counter64, rmon1dayHCRxMAClimitStatusInfo INTEGER, rmon1dayHCRxFilterDiscard Counter64, rmon1dayHCRxFilterDiscardStatusInfo INTEGER, rmon1dayHCRxQoSDiscard Counter64, rmon1dayHCRxQoSDiscardStatusInfo INTEGER, rmon1dayHCTxQueue0Discard Counter64, rmon1dayHCTxQueue0DiscardStatusInfo INTEGER, rmon1dayHCTxQueue1Discard Counter64, rmon1dayHCTxQueue1DiscardStatusInfo INTEGER, rmon1dayHCTxQueue2Discard Counter64, rmon1dayHCTxQueue2DiscardStatusInfo INTEGER, rmon1dayHCTxQueue3Discard Counter64, rmon1dayHCTxQueue3DiscardStatusInfo INTEGER, rmon1dayHCTxQueue4Discard Counter64, rmon1dayHCTxQueue4DiscardStatusInfo INTEGER, rmon1dayHCTxQueue5Discard Counter64, rmon1dayHCTxQueue5DiscardStatusInfo INTEGER, rmon1dayHCTxQueue6Discard Counter64, rmon1dayHCTxQueue6DiscardStatusInfo INTEGER, rmon1dayHCTxQueue7Discard Counter64, rmon1dayHCTxQueue7DiscardStatusInfo INTEGER, rmon1dayTxEthStatsOversizePkts Counter32, rmon1dayTxEthStatsOversizePktsStatusInfo INTEGER } rmon1dayIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon1dayPortEntry 1 } rmon1dayNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon1dayPortEntry 2 } rmon1dayHCRxEthStatsOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Octs" ::= { rmon1dayPortEntry 3 } rmon1dayHCRxEthStatsOctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 4 } rmon1dayHCTxEthStatsOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Octs" ::= { rmon1dayPortEntry 5 } rmon1dayHCTxEthStatsOctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 6 } rmon1dayRxEthStatsPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Pkts" ::= { rmon1dayPortEntry 7 } rmon1dayRxEthStatsPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 8 } rmon1dayTxEthStatsPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Pkts" ::= { rmon1dayPortEntry 9 } rmon1dayTxEthStatsPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 10 } rmon1dayRxEthStatsDropEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Drop Events" ::= { rmon1dayPortEntry 11 } rmon1dayRxEthStatsDropEventsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 12 } rmon1dayRxEthStatsUndersizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Undersize Pkts" ::= { rmon1dayPortEntry 13 } rmon1dayRxEthStatsUndersizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 14 } rmon1dayRxEthStatsFragments OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Fragments" ::= { rmon1dayPortEntry 15 } rmon1dayRxEthStatsFragmentsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 16 } rmon1dayRxEthStatsPkts64Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 64 Octs" ::= { rmon1dayPortEntry 17 } rmon1dayRxEthStatsPkts64OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 18 } rmon1dayTxEthStatsPkts64Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 64 Octs" ::= { rmon1dayPortEntry 19 } rmon1dayTxEthStatsPkts64OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 20 } rmon1dayRxEthStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 65 to 127 Octs" ::= { rmon1dayPortEntry 21 } rmon1dayRxEthStatsPkts65to127OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 22 } rmon1dayTxEthStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 65 to 127 Octs" ::= { rmon1dayPortEntry 23 } rmon1dayTxEthStatsPkts65to127OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 24 } rmon1dayRxEthStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 128 to 255 Octs." ::= { rmon1dayPortEntry 25 } rmon1dayRxEthStatsPkts128to255OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 26 } rmon1dayTxEthStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 128 to 255 Octs" ::= { rmon1dayPortEntry 27 } rmon1dayTxEthStatsPkts128to255OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 28 } rmon1dayRxEthStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 256 to 511 Octs." ::= { rmon1dayPortEntry 29 } rmon1dayRxEthStatsPkts256to511OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 30 } rmon1dayTxEthStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 256 to 511 Octs." ::= { rmon1dayPortEntry 31 } rmon1dayTxEthStatsPkts256to511OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 32 } rmon1dayRxEthStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 512 to 1023 Octs" ::= { rmon1dayPortEntry 33 } rmon1dayRxEthStatsPkts512to1023OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 34 } rmon1dayTxEthStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 512 to 1023 Octs" ::= { rmon1dayPortEntry 35 } rmon1dayTxEthStatsPkts512to1023OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 36 } rmon1dayRxEthStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 1024 to 1518 Octs." ::= { rmon1dayPortEntry 37 } rmon1dayRxEthStatsPkts1024to1518OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 38 } rmon1dayTxEthStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 1024 to 1518 Octs." ::= { rmon1dayPortEntry 39 } rmon1dayTxEthStatsPkts1024to1518OctetsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 40 } rmon1dayRxEthStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX CRC Alignment Errors" ::= { rmon1dayPortEntry 41 } rmon1dayRxEthStatsCRCAlignErrorsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 42 } rmon1dayRxEthStatsOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Oversize Pkts" ::= { rmon1dayPortEntry 43 } rmon1dayRxEthStatsOversizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 44 } rmon1dayRxEthStatsJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Jabbers" ::= { rmon1dayPortEntry 45 } rmon1dayRxEthStatsJabbersStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 46 } rmon1dayRxEthStatsMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Multicast Pkts" ::= { rmon1dayPortEntry 47 } rmon1dayRxEthStatsMulticastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 48 } rmon1dayTxEthStatsMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Multicast Pkts." ::= { rmon1dayPortEntry 49 } rmon1dayTxEthStatsMulticastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 50 } rmon1dayRxEthStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Broadcast Pkts." ::= { rmon1dayPortEntry 51 } rmon1dayRxEthStatsBroadcastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 52 } rmon1dayTxEthStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Broadcast Pkts." ::= { rmon1dayPortEntry 53 } rmon1dayTxEthStatsBroadcastPktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 54 } rmon1dayTxEthStatsCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Collisions." ::= { rmon1dayPortEntry 55 } rmon1dayTxEthStatsCollisionsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Collistions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 56 } rmon1dayHCRxUnknownTPID OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown TPID." ::= { rmon1dayPortEntry 57 } rmon1dayHCRxUnknownTPIDStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 58 } rmon1dayHCRxUnknownVID OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown VID." ::= { rmon1dayPortEntry 59 } rmon1dayHCRxUnknownVIDStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 60 } rmon1dayHCRxMAClimit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX MAC Limit." ::= { rmon1dayPortEntry 61 } rmon1dayHCRxMAClimitStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 62 } rmon1dayHCRxFilterDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Filter Discard." ::= { rmon1dayPortEntry 63 } rmon1dayHCRxFilterDiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 64 } rmon1dayHCRxQoSDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard." ::= { rmon1dayPortEntry 65 } rmon1dayHCRxQoSDiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 66 } rmon1dayHCTxQueue0Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue0 Discard." ::= { rmon1dayPortEntry 67 } rmon1dayHCTxQueue0DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 68 } rmon1dayHCTxQueue1Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue1 Discard." ::= { rmon1dayPortEntry 69 } rmon1dayHCTxQueue1DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 70 } rmon1dayHCTxQueue2Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue2 Discard." ::= { rmon1dayPortEntry 71 } rmon1dayHCTxQueue2DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 72 } rmon1dayHCTxQueue3Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue3 Discard." ::= { rmon1dayPortEntry 73 } rmon1dayHCTxQueue3DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 74 } rmon1dayHCTxQueue4Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPortEntry 75 } rmon1dayHCTxQueue4DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 76 } rmon1dayHCTxQueue5Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPortEntry 77 } rmon1dayHCTxQueue5DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 78 } rmon1dayHCTxQueue6Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPortEntry 79 } rmon1dayHCTxQueue6DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 80 } rmon1dayHCTxQueue7Discard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPortEntry 81 } rmon1dayHCTxQueue7DiscardStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 82 } rmon1dayTxEthStatsOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Oversize Pkts." ::= { rmon1dayPortEntry 83 } rmon1dayTxEthStatsOversizePktsStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPortEntry 84 } rmon1dayPort2Table OBJECT-TYPE SYNTAX SEQUENCE OF Rmon1dayPort2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 1day Port Monitoring Table." ::= { rmon1dayportGroup 2 } rmon1dayPort2Entry OBJECT-TYPE SYNTAX Rmon1dayPort2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon1dayPort2IfIndex } ::= { rmon1dayPort2Table 1 } Rmon1dayPort2Entry ::= SEQUENCE { rmon1dayPort2IfIndex InterfaceIndex, rmon1dayPort2NEAddress IpAddress, rmon1dayHCRxEthStatsOctets2 Counter64, rmon1dayHCRxEthStatsOctets2Status IpeStatsInfo, rmon1dayHCTxEthStatsOctets2 Counter64, rmon1dayHCTxEthStatsOctets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts2 Counter64, rmon1dayHCRxEthStatsPkts2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts2 Counter64, rmon1dayHCTxEthStatsPkts2Status IpeStatsInfo, rmon1dayRxEthStatsDropEvents2 Counter32, rmon1dayRxEthStatsDropEvents2Status IpeStatsInfo, rmon1dayRxEthStatsUndersizePkts2 Counter32, rmon1dayRxEthStatsUndersizePkts2Status IpeStatsInfo, rmon1dayRxEthStatsFragments2 Counter32, rmon1dayRxEthStatsFragments2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts64Octets2 Counter64, rmon1dayHCRxEthStatsPkts64Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts64Octets2 Counter64, rmon1dayHCTxEthStatsPkts64Octets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts65to127Octets2 Counter64, rmon1dayHCRxEthStatsPkts65to127Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts65to127Octets2 Counter64, rmon1dayHCTxEthStatsPkts65to127Octets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts128to255Octets2 Counter64, rmon1dayHCRxEthStatsPkts128to255Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts128to255Octets2 Counter64, rmon1dayHCTxEthStatsPkts128to255Octets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts256to511Octets2 Counter64, rmon1dayHCRxEthStatsPkts256to511Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts256to511Octets2 Counter64, rmon1dayHCTxEthStatsPkts256to511Octets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts512to1023Octets2 Counter64, rmon1dayHCRxEthStatsPkts512to1023Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts512to1023Octets2 Counter64, rmon1dayHCTxEthStatsPkts512to1023Octets2Status IpeStatsInfo, rmon1dayHCRxEthStatsPkts1024to1518Octets2 Counter64, rmon1dayHCRxEthStatsPkts1024to1518Octets2Status IpeStatsInfo, rmon1dayHCTxEthStatsPkts1024to1518Octets2 Counter64, rmon1dayHCTxEthStatsPkts1024to1518Octets2Status IpeStatsInfo, rmon1dayRxEthStatsCRCAlignErrors2 Counter32, rmon1dayRxEthStatsCRCAlignErrors2Status IpeStatsInfo, rmon1dayRxEthStatsOversizePkts2 Counter32, rmon1dayRxEthStatsOversizePkts2Status IpeStatsInfo, rmon1dayRxEthStatsJabbers2 Counter32, rmon1dayRxEthStatsJabbers2Status IpeStatsInfo, rmon1dayRxEthStatsMulticastPkts2 Counter32, rmon1dayRxEthStatsMulticastPkts2Status IpeStatsInfo, rmon1dayTxEthStatsMulticastPkts2 Counter32, rmon1dayTxEthStatsMulticastPkts2Status IpeStatsInfo, rmon1dayRxEthStatsBroadcastPkts2 Counter32, rmon1dayRxEthStatsBroadcastPkts2Status IpeStatsInfo, rmon1dayTxEthStatsBroadcastPkts2 Counter32, rmon1dayTxEthStatsBroadcastPkts2Status IpeStatsInfo, rmon1dayTxEthStatsCollisions2 Counter32, rmon1dayTxEthStatsCollisions2Status IpeStatsInfo, rmon1dayHCRxUnknownTPID2 Counter64, rmon1dayHCRxUnknownTPID2Status IpeStatsInfo, rmon1dayHCRxUnknownVID2 Counter64, rmon1dayHCRxUnknownVID2Status IpeStatsInfo, rmon1dayHCRxMAClimit2 Counter64, rmon1dayHCRxMAClimit2Status IpeStatsInfo, rmon1dayHCRxFilterDiscard2 Counter64, rmon1dayHCRxFilterDiscard2Status IpeStatsInfo, rmon1dayHCRxQoSDiscard2 Counter64, rmon1dayHCRxQoSDiscard2Status IpeStatsInfo, rmon1dayHCTxQueue0Discard2 Counter64, rmon1dayHCTxQueue0Discard2Status IpeStatsInfo, rmon1dayHCTxQueue1Discard2 Counter64, rmon1dayHCTxQueue1Discard2Status IpeStatsInfo, rmon1dayHCTxQueue2Discard2 Counter64, rmon1dayHCTxQueue2Discard2Status IpeStatsInfo, rmon1dayHCTxQueue3Discard2 Counter64, rmon1dayHCTxQueue3Discard2Status IpeStatsInfo, rmon1dayHCTxQueue4Discard2 Counter64, rmon1dayHCTxQueue4Discard2Status IpeStatsInfo, rmon1dayHCTxQueue5Discard2 Counter64, rmon1dayHCTxQueue5Discard2Status IpeStatsInfo, rmon1dayHCTxQueue6Discard2 Counter64, rmon1dayHCTxQueue6Discard2Status IpeStatsInfo, rmon1dayHCTxQueue7Discard2 Counter64, rmon1dayHCTxQueue7Discard2Status IpeStatsInfo, rmon1dayTxEthStatsOversizePkts2 Counter32, rmon1dayTxEthStatsOversizePkts2Status IpeStatsInfo } rmon1dayPort2IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon1dayPort2Entry 1 } rmon1dayPort2NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon1dayPort2Entry 2 } rmon1dayHCRxEthStatsOctets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Octs" ::= { rmon1dayPort2Entry 3 } rmon1dayHCRxEthStatsOctets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 4 } rmon1dayHCTxEthStatsOctets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Octs" ::= { rmon1dayPort2Entry 5 } rmon1dayHCTxEthStatsOctets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 6 } rmon1dayHCRxEthStatsPkts2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Pkts" ::= { rmon1dayPort2Entry 7 } rmon1dayHCRxEthStatsPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 8 } rmon1dayHCTxEthStatsPkts2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Pkts" ::= { rmon1dayPort2Entry 9 } rmon1dayHCTxEthStatsPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 10 } rmon1dayRxEthStatsDropEvents2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Drop Events" ::= { rmon1dayPort2Entry 11 } rmon1dayRxEthStatsDropEvents2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 12 } rmon1dayRxEthStatsUndersizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Undersize Pkts" ::= { rmon1dayPort2Entry 13 } rmon1dayRxEthStatsUndersizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 14 } rmon1dayRxEthStatsFragments2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Fragments" ::= { rmon1dayPort2Entry 15 } rmon1dayRxEthStatsFragments2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 16 } rmon1dayHCRxEthStatsPkts64Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 64 Octs" ::= { rmon1dayPort2Entry 17 } rmon1dayHCRxEthStatsPkts64Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 18 } rmon1dayHCTxEthStatsPkts64Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 64 Octs" ::= { rmon1dayPort2Entry 19 } rmon1dayHCTxEthStatsPkts64Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 20 } rmon1dayHCRxEthStatsPkts65to127Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 65 to 127 Octs" ::= { rmon1dayPort2Entry 21 } rmon1dayHCRxEthStatsPkts65to127Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 22 } rmon1dayHCTxEthStatsPkts65to127Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 65 to 127 Octs" ::= { rmon1dayPort2Entry 23 } rmon1dayHCTxEthStatsPkts65to127Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 24 } rmon1dayHCRxEthStatsPkts128to255Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 128 to 255 Octs." ::= { rmon1dayPort2Entry 25 } rmon1dayHCRxEthStatsPkts128to255Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 26 } rmon1dayHCTxEthStatsPkts128to255Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 128 to 255 Octs" ::= { rmon1dayPort2Entry 27 } rmon1dayHCTxEthStatsPkts128to255Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 28 } rmon1dayHCRxEthStatsPkts256to511Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 256 to 511 Octs." ::= { rmon1dayPort2Entry 29 } rmon1dayHCRxEthStatsPkts256to511Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 30 } rmon1dayHCTxEthStatsPkts256to511Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 256 to 511 Octs." ::= { rmon1dayPort2Entry 31 } rmon1dayHCTxEthStatsPkts256to511Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 32 } rmon1dayHCRxEthStatsPkts512to1023Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 512 to 1023 Octs" ::= { rmon1dayPort2Entry 33 } rmon1dayHCRxEthStatsPkts512to1023Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 34 } rmon1dayHCTxEthStatsPkts512to1023Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 512 to 1023 Octs" ::= { rmon1dayPort2Entry 35 } rmon1dayHCTxEthStatsPkts512to1023Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 36 } rmon1dayHCRxEthStatsPkts1024to1518Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 1024 to 1518 Octs." ::= { rmon1dayPort2Entry 37 } rmon1dayHCRxEthStatsPkts1024to1518Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 38 } rmon1dayHCTxEthStatsPkts1024to1518Octets2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 1024 to 1518 Octs." ::= { rmon1dayPort2Entry 39 } rmon1dayHCTxEthStatsPkts1024to1518Octets2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 40 } rmon1dayRxEthStatsCRCAlignErrors2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX CRC Alignment Errors" ::= { rmon1dayPort2Entry 41 } rmon1dayRxEthStatsCRCAlignErrors2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 42 } rmon1dayRxEthStatsOversizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Oversize Pkts" ::= { rmon1dayPort2Entry 43 } rmon1dayRxEthStatsOversizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 44 } rmon1dayRxEthStatsJabbers2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Jabbers" ::= { rmon1dayPort2Entry 45 } rmon1dayRxEthStatsJabbers2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 46 } rmon1dayRxEthStatsMulticastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Multicast Pkts" ::= { rmon1dayPort2Entry 47 } rmon1dayRxEthStatsMulticastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 48 } rmon1dayTxEthStatsMulticastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Multicast Pkts." ::= { rmon1dayPort2Entry 49 } rmon1dayTxEthStatsMulticastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 50 } rmon1dayRxEthStatsBroadcastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Broadcast Pkts." ::= { rmon1dayPort2Entry 51 } rmon1dayRxEthStatsBroadcastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 52 } rmon1dayTxEthStatsBroadcastPkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Broadcast Pkts." ::= { rmon1dayPort2Entry 53 } rmon1dayTxEthStatsBroadcastPkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 54 } rmon1dayTxEthStatsCollisions2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Collisions." ::= { rmon1dayPort2Entry 55 } rmon1dayTxEthStatsCollisions2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Collistions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 56 } rmon1dayHCRxUnknownTPID2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown TPID." ::= { rmon1dayPort2Entry 57 } rmon1dayHCRxUnknownTPID2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 58 } rmon1dayHCRxUnknownVID2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown VID." ::= { rmon1dayPort2Entry 59 } rmon1dayHCRxUnknownVID2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 60 } rmon1dayHCRxMAClimit2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX MAC Limit." ::= { rmon1dayPort2Entry 61 } rmon1dayHCRxMAClimit2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 62 } rmon1dayHCRxFilterDiscard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Filter Discard." ::= { rmon1dayPort2Entry 63 } rmon1dayHCRxFilterDiscard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 64 } rmon1dayHCRxQoSDiscard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard." ::= { rmon1dayPort2Entry 65 } rmon1dayHCRxQoSDiscard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 66 } rmon1dayHCTxQueue0Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue0 Discard." ::= { rmon1dayPort2Entry 67 } rmon1dayHCTxQueue0Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 68 } rmon1dayHCTxQueue1Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue1 Discard." ::= { rmon1dayPort2Entry 69 } rmon1dayHCTxQueue1Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 70 } rmon1dayHCTxQueue2Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue2 Discard." ::= { rmon1dayPort2Entry 71 } rmon1dayHCTxQueue2Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 72 } rmon1dayHCTxQueue3Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue3 Discard." ::= { rmon1dayPort2Entry 73 } rmon1dayHCTxQueue3Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 74 } rmon1dayHCTxQueue4Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPort2Entry 75 } rmon1dayHCTxQueue4Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 76 } rmon1dayHCTxQueue5Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPort2Entry 77 } rmon1dayHCTxQueue5Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 78 } rmon1dayHCTxQueue6Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPort2Entry 79 } rmon1dayHCTxQueue6Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 80 } rmon1dayHCTxQueue7Discard2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0." ::= { rmon1dayPort2Entry 81 } rmon1dayHCTxQueue7Discard2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 82 } rmon1dayTxEthStatsOversizePkts2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Oversize Pkts." ::= { rmon1dayPort2Entry 83 } rmon1dayTxEthStatsOversizePkts2Status OBJECT-TYPE SYNTAX IpeStatsInfo MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayPort2Entry 84 } rmon15minVlanGroup OBJECT IDENTIFIER ::= { rmonEthGroup 3 } rmon15minVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon15minVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 15min VLAN Counter Table." ::= { rmon15minVlanGroup 1 } rmon15minVlanEntry OBJECT-TYPE SYNTAX Rmon15minVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon15minVlanCounterIndex } ::= { rmon15minVlanTable 1 } Rmon15minVlanEntry ::= SEQUENCE { rmon15minVlanCounterIndex Integer32, rmon15minVlanCounterNEAddress IpAddress, rmon15minHCRxFrame Counter64, rmon15minHCRxFrameStatusInfo INTEGER, rmon15minHCTxFrame Counter64, rmon15minHCTxFrameStatusInfo INTEGER, rmon15minHCRxQoSDiscardFrame Counter64, rmon15minHCRxQoSDiscardFrameStatusInfo INTEGER } rmon15minVlanCounterIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon15minVlanEntry 1 } rmon15minVlanCounterNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon15minVlanEntry 2 } rmon15minHCRxFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min VLAN RX Frames" ::= { rmon15minVlanEntry 3 } rmon15minHCRxFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min VLAN RX Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minVlanEntry 4 } rmon15minHCTxFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min VLAN TX Frames" ::= { rmon15minVlanEntry 5 } rmon15minHCTxFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min VLAN TX Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minVlanEntry 6 } rmon15minHCRxQoSDiscardFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard Frames" ::= { rmon15minVlanEntry 7 } rmon15minHCRxQoSDiscardFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 15min RX QoS Discard Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon15minVlanEntry 8 } rmon15minVlanPortMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon15minVlanPortMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "If the VLAN Counter is enabled to the port, this object will show the corresponding VLAN Counter Index." ::= { rmon15minVlanGroup 2 } rmon15minVlanPortMappingEntry OBJECT-TYPE SYNTAX Rmon15minVlanPortMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon15minVlanPortMappingIfIndex, rmon15minVlanMappingVlanIndex } ::= { rmon15minVlanPortMappingTable 1 } Rmon15minVlanPortMappingEntry ::= SEQUENCE { rmon15minVlanPortMappingIfIndex InterfaceIndex, rmon15minVlanMappingVlanIndex Integer32, rmon15minVlanMappingNEAddress IpAddress, rmon15minVlanCounterId Integer32 } rmon15minVlanPortMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon15minVlanPortMappingEntry 1 } rmon15minVlanMappingVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon15minVlanPortMappingEntry 2 } rmon15minVlanMappingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon15minVlanPortMappingEntry 3 } rmon15minVlanCounterId OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN Counter ID which is assigned to the port. value range : 1 - 8 (iPASOLINK200/400/1000series/EX/iX) : 1 - 256 (iPASOLINK VR 2/VR 4/VR 10)" ::= { rmon15minVlanPortMappingEntry 4 } rmon1dayVlanGroup OBJECT IDENTIFIER ::= { rmonEthGroup 4 } rmon1dayVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon1dayVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RMON 1day VLAN Counter Table." ::= { rmon1dayVlanGroup 1 } rmon1dayVlanEntry OBJECT-TYPE SYNTAX Rmon1dayVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon1dayVlanCounterIndex } ::= { rmon1dayVlanTable 1 } Rmon1dayVlanEntry ::= SEQUENCE { rmon1dayVlanCounterIndex Integer32, rmon1dayVlanCounterNEAddress IpAddress, rmon1dayHCRxFrame Counter64, rmon1dayHCRxFrameStatusInfo INTEGER, rmon1dayHCTxFrame Counter64, rmon1dayHCTxFrameStatusInfo INTEGER, rmon1dayHCRxQoSDiscardFrame Counter64, rmon1dayHCRxQoSDiscardFrameStatusInfo INTEGER } rmon1dayVlanCounterIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon1dayVlanEntry 1 } rmon1dayVlanCounterNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon1dayVlanEntry 2 } rmon1dayHCRxFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day VLAN RX Frames" ::= { rmon1dayVlanEntry 3 } rmon1dayHCRxFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day VLAN RX Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayVlanEntry 4 } rmon1dayHCTxFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day VLAN TX Frames" ::= { rmon1dayVlanEntry 5 } rmon1dayHCTxFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day VLAN TX Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayVlanEntry 6 } rmon1dayHCRxQoSDiscardFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard Frames" ::= { rmon1dayVlanEntry 7 } rmon1dayHCRxQoSDiscardFrameStatusInfo OBJECT-TYPE SYNTAX INTEGER { invalid(0), valid-no-maintenance(1), valid-maintenance(2), invalid-no-maintenance(3), invalid-maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "RMON 1day RX QoS Discard Frames Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interval." ::= { rmon1dayVlanEntry 8 } rmon1dayVlanPortMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF Rmon1dayVlanPortMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "If the VLAN Counter is enabled to the port, this object will show the corresponding VLAN Counter Index." ::= { rmon1dayVlanGroup 2 } rmon1dayVlanPortMappingEntry OBJECT-TYPE SYNTAX Rmon1dayVlanPortMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rmon1dayVlanPortMappingIfIndex, rmon1dayVlanMappingVlanIndex } ::= { rmon1dayVlanPortMappingTable 1 } Rmon1dayVlanPortMappingEntry ::= SEQUENCE { rmon1dayVlanPortMappingIfIndex InterfaceIndex, rmon1dayVlanMappingVlanIndex Integer32, rmon1dayVlanMappingNEAddress IpAddress, rmon1dayVlanCounterId Integer32 } rmon1dayVlanPortMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon1dayVlanPortMappingEntry 1 } rmon1dayVlanMappingVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { rmon1dayVlanPortMappingEntry 2 } rmon1dayVlanMappingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { rmon1dayVlanPortMappingEntry 3 } rmon1dayVlanCounterId OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN Counter ID which is assigned to the port. value range : 1 - 8 (iPASOLINK200/400/1000series/EX/iX) : 1 - 256 (iPASOLINK VR 2/VR 4/VR 10)" ::= { rmon1dayVlanPortMappingEntry 4 } ----------------------------------------------- -- End User MIB Object Definitions ----------------------------------------------- END