-- ========================================================================== -- File : oasfp.mib -- Description : Private MIB for SFP Modules -- -- By : Ilan Weber -- Version : Revision: 0.12 -- Original Date : May 26, 2005 -- Last Change : Date: September 16, 2010 -- ========================================================================== -- -- -- Copyright (c) 2005 MRV. All Rights Reserved. -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This MRV SNMP MIB Specification -- embodies MRV proprietary intellectual property. MRV -- retains all title and ownership in the specification, including any -- revisions. -- -- It is MRV's intent to encourage the widespread use of this -- specification in connection with the management of MRV's -- products. MRV grants vendor, end-users, and other interested -- parties a non-exclusive license to use this specification in -- connection with the management of MRV's products. -- -- This specification is supplied "AS IS," and MRV makes no -- warranty, either express or implied, as to the use, operation, -- condition, or performance of the specification. -- -- MRV retains the right to change this MIB without notification. -- OA-SFP-MIB DEFINITIONS ::= BEGIN IMPORTS oaDevTrapsPortsIfAlias FROM OA-TRAP-MESSAGES-MIB enterprises, OBJECT-TYPE FROM SNMPv2-SMI Integer32, Unsigned32 FROM SNMPv2-SMI NOTIFICATION-TYPE FROM SNMPv2-SMI -- TRAP-TYPE FROM RFC-1215 DisplayString FROM SNMPv2-TC MODULE-IDENTITY FROM SNMPv2-SMI oaccess FROM OS-COMMON-TC-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF; ------------------------------------------------------------------------------ -- Object Identifier Definition ------------------------------------------------------------------------------ oaSfpMib MODULE-IDENTITY LAST-UPDATED "200505260000Z" -- 26 May, 2005 ORGANIZATION "MRV Communications" CONTACT-INFO "For technical support, please contact your service channel" DESCRIPTION "This MIB defines objects of pluggable modules (such as SFP modules). The MIB objects defined in this MIB are based on the Small Form Factor Pluggable (SFP) Transceiver MultiSource Agreement(MSA)." REVISION "200505260000Z" -- 26 May, 2005 DESCRIPTION "Initial MIB Creation" ::= { oaManagement 18 } -- oaccess OBJECT IDENTIFIER ::= { enterprises 6926 } oaManagement OBJECT IDENTIFIER ::= { oaccess 1 } oaAlarmNotifications OBJECT IDENTIFIER ::= { oaSfpMib 0 } oaSfp OBJECT IDENTIFIER ::= { oaSfpMib 1 } oaSfpMIBObjects OBJECT IDENTIFIER ::= { oaSfp 1 } oaXfpMIBObjects OBJECT IDENTIFIER ::= { oaSfp 2 } oaDsfpMIBObjects OBJECT IDENTIFIER ::= { oaSfp 3 } oaMsa300PinMIBObjects OBJECT IDENTIFIER ::= { oaSfp 4 } ------------------------------------------------------------------------------ -- SFP MIB Definitions ------------------------------------------------------------------------------ oaSfpCompatibleInterfaceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in the system which are sfp compatible" ::= { oaSfpMIBObjects 1 } ------------------------------------------------------------------------------ -- SFP Info Table ------------------------------------------------------------------------------ oaSfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OaSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sfp information table." ::= { oaSfpMIBObjects 2 } oaSfpInfoEntry OBJECT-TYPE SYNTAX OaSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SFP Information Table" INDEX { oaSfpInfoSlotIndex, oaSfpInfoPortIndex } ::= { oaSfpInfoTable 1 } OaSfpInfoEntry ::= SEQUENCE { oaSfpInfoSlotIndex Integer32, oaSfpInfoPortIndex Integer32, oaSfpInfoIdentifier INTEGER, oaSfpInfoVendorSpecificIdentifier DisplayString, oaSfpInfoConnector INTEGER, oaSfpInfoVendorSpecificConnector DisplayString, oaSfpInfoTransceiver10GigaEth DisplayString, oaSfpInfoTransceiverInfiniband DisplayString, oaSfpInfoTransceiverEscon DisplayString, oaSfpInfoTransceiverSonet DisplayString, oaSfpInfoTransceiverEthernet DisplayString, oaSfpInfoTransceiverFibreChannel DisplayString, oaSfpInfoVendorName DisplayString, oaSfpInfoVendorOUI DisplayString, oaSfpInfoVendorPN DisplayString, oaSfpInfoVendorRev DisplayString, oaSfpInfoLaserWavelength Integer32, oaSfpTunability INTEGER, oaSfpInfoVendorSN DisplayString, oaSfpInfoVendorDate DisplayString, oaSfpInfoVendorSpecificLotCode DisplayString, oaSfpInfoVendorSpecificData OCTET STRING, oaSfpInfoDiagnosticPowerType INTEGER, oaSfpInfoDigitalDiagnostic INTEGER, oaSfpInfoDiagnosticCalibration INTEGER, oaSfpInfoInstalledStatus INTEGER, oaSfpInfofaultStatus INTEGER, oaSfpInfoEnableStatus INTEGER, oaSfpInfoUnitName DisplayString, oaSfpInfoFiberType DisplayString, oaSfpInfoReach DisplayString, oaSfpInfoConnectorType DisplayString, oaSfpInfoItemNum DisplayString, oaSfpInfoHWRev DisplayString, oaSfpInfoCleiCode DisplayString, oaSfpInfoPageA2hSN DisplayString, oaSfpInfoManufactureDate DisplayString, oaSfpInfoManufactureID DisplayString } oaSfpInfoSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SFP slot number" ::= { oaSfpInfoEntry 1 } oaSfpInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SFP port number" ::= { oaSfpInfoEntry 2 } oaSfpInfoIdentifier OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), gbic(3), fixed(4), sfp(5), xbi300pin(6), xenpak(7), xfp(8), xff(9), xfpE(10), xpak(11), x2(12), dsfp(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of serial transceiver unknown - Unknown or unspecified other - Vendor specific gbic - GBIC fixed - Module/connector soldered to motherboard sfp - SFP transceiver xbi300pin - 300 pin XBI xenpak - XENPAK transceiver xfp - XFP transceiver xff - XFF transceiver xfpE - XFP-E transceiver xpak - XPAK transceiver x2 - X2 transceiver dsfp - DWDM SFP transceiver" ::= { oaSfpInfoEntry 3 } oaSfpInfoVendorSpecificIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor specific identifier. This Object will be set to value other than null only if oaSfpInfoIdentifier returns a value of other" ::= { oaSfpInfoEntry 4 } oaSfpInfoConnector OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), sc(3), fcs1cc(4), fcs2cc(5), bnctnc(6), fcch(7), fiberJack(8), lc(9), mtrj(10), mu(11), sg(12), opticalPigtail(13), hssdcii(34), copperPigtail(35) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of external connector provided unknown - Unknown or unspecified other - Vendor specific sc - SC fcs1cc - Fibre Channel Style 1 copper connector fcs2cc - Fibre Channel Style 2 copper connector bnctnc - BNC/TNC fcch - Fibre Channel coaxial headers fiberJack - Fiber Jack lc --LC mtrj - MT-RJ mu - MU sg - SG opticalPigtail - Optical Pigtail hssdcii - HSSDC II copperPigtail - Copper Pigtail" ::= { oaSfpInfoEntry 8 } oaSfpInfoVendorSpecificConnector OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of vendor specific Connector. This Object will be set to value other than null only if oaSfpInfoConnector returns a value of other" ::= { oaSfpInfoEntry 9 } oaSfpInfoTransceiver10GigaEth OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The 10 Giga Ethernet type of optic transceiver compliance code." ::= { oaSfpInfoEntry 18 } oaSfpInfoTransceiverInfiniband OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Infiniband type of optic transceiver compliance code." ::= { oaSfpInfoEntry 19 } oaSfpInfoTransceiverEscon OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ESCON type of optic transceiver compliance code." ::= { oaSfpInfoEntry 20 } oaSfpInfoTransceiverSonet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SONET type of optic transceiver compliance code." ::= { oaSfpInfoEntry 21 } oaSfpInfoTransceiverEthernet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Ethernet type of optic transceiver compliance code." ::= { oaSfpInfoEntry 22 } oaSfpInfoTransceiverFibreChannel OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Fibre Channel type of optic transceiver compliance code." ::= { oaSfpInfoEntry 23 } oaSfpInfoVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp vendor name which is the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company code for the corporation, or the stock exchange code for the corporation." ::= { oaSfpInfoEntry 24 } oaSfpInfoVendorOUI OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp vendor organizationally unique identifier field (vendor OUI) that contains the IEEE company identifier for the vendor. A value of all zero in the 3 octet field indicates that the vendor OUI is unspecified" ::= { oaSfpInfoEntry 25 } oaSfpInfoVendorPN OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp vendor part number (Vendor PN) or product name if the Vendor PN is unspecified, the null string will be returned" ::= { oaSfpInfoEntry 26 } oaSfpInfoVendorRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The transceiver vendor's product revision number (Vendor Rev) if the Vendor Rev is unspecified, the null string will be returned" ::= { oaSfpInfoEntry 27 } oaSfpInfoLaserWavelength OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 Nano Meter(nm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Nominal Transmitter output wavelength at room temperature. Units: 0.01 Nano Meter(nm)" ::= { oaSfpInfoEntry 28 } oaSfpTunability OBJECT-TYPE SYNTAX INTEGER { unknown(1), tunable(2), nonTunable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tunability of SFP/XFP transceiver. unknown - Unknown about tunability feature; tunable - Wavelength tunability feature is implemented; nonTunable - Wavelength tunability feature is not implemented." ::= { oaSfpInfoEntry 29 } -- Extended ID Fields -- oaSfpInfoVendorSN OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Sfp vendor serial number (Vendor SN) if the Vendor SN is unspecified, the null string will be returned" ::= { oaSfpInfoEntry 32 } oaSfpInfoVendorDate OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vendor's date. Formated: YY MM DD " ::= { oaSfpInfoEntry 33 } oaSfpInfoVendorSpecificLotCode OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vendor Specific Lot code. A null value indicates that the lot code is unspecified." ::= { oaSfpInfoEntry 34 } oaSfpInfoVendorSpecificData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor Specific Information which can be read from the SFP transceiver (Reference: SFF-8472, revision 9.3 - Registers 96-127 )" ::= { oaSfpInfoEntry 35 } oaSfpInfoDiagnosticPowerType OBJECT-TYPE SYNTAX INTEGER { unknown(1), average(2), oma(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The diagnostic monitoring receive power type in the SFP transceiver. unknown - Unknown avarage - Received power measurement type is avarage oma - Received power measurement type is OMA" ::= { oaSfpInfoEntry 36 } oaSfpInfoDigitalDiagnostic OBJECT-TYPE SYNTAX INTEGER { unknown(1), digitalDiagnostic(2), noDigitalDiagnostic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The diagnostic monitoring implemented in the SFP transceiver. unknown - Unknown digitalDiagMonitoring - Digital diagnostic monitoring implemented. noDigitalDiagMonitoring - Digital diagnostic monitoring not implemented." ::= { oaSfpInfoEntry 37 } oaSfpInfoDiagnosticCalibration OBJECT-TYPE SYNTAX INTEGER { unknown(1), externalCalibration(2), internalCalibration(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The diagnostic calibration in the SFP transceiver. unknown - Unknown ExternalCalibration - External Calibration InternalCalibration - Internal Calibration" ::= { oaSfpInfoEntry 38 } oaSfpInfoInstalledStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notInstalled(2), installed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current installed state of the sfp transceiver unknown - Unknown notInstalled - the SFP transceiver is not installed installed - the sfp transceiver is installed" ::= { oaSfpInfoEntry 40 } oaSfpInfofaultStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), faulty(2), operational(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current fault state of the sfp transceiver unknown - Unknown fault - the sfp transceiver is faulty operational - the sfp transceiver is working properly" ::= { oaSfpInfoEntry 41 } oaSfpInfoEnableStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current enable state of the sfp transceiver unknown - Unknown enabled - the sfp transceiver has been enabled disabled - the sfp transceiver has been diabled" ::= { oaSfpInfoEntry 42 } oaSfpInfoUnitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp unit name" ::= { oaSfpInfoEntry 43 } oaSfpInfoFiberType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..9)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp fiber type multi/single mode." ::= { oaSfpInfoEntry 44 } oaSfpInfoReach OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp info reach." ::= { oaSfpInfoEntry 45 } oaSfpInfoConnectorType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp connector type" ::= { oaSfpInfoEntry 46 } oaSfpInfoItemNum OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp item number." ::= { oaSfpInfoEntry 47 } oaSfpInfoHWRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp hardware revision." ::= { oaSfpInfoEntry 48 } oaSfpInfoCleiCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp clei code" ::= { oaSfpInfoEntry 49 } oaSfpInfoPageA2hSN OBJECT-TYPE SYNTAX DisplayString (SIZE(0..26)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp serial number taken from A2h eeprom page" ::= { oaSfpInfoEntry 50 } oaSfpInfoManufactureDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp manufacture date." ::= { oaSfpInfoEntry 51 } oaSfpInfoManufactureID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..119)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sfp manufacture ID" ::= { oaSfpInfoEntry 52 } ------------------------------------------------------------------------------ -- SFP Diagnostics Table ------------------------------------------------------------------------------ oaSfpDiagnosticTable OBJECT-TYPE SYNTAX SEQUENCE OF OaSfpDiagnosticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sfp real time diagnostic table." ::= { oaSfpMIBObjects 3 } oaSfpDiagnosticEntry OBJECT-TYPE SYNTAX OaSfpDiagnosticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SFP Real Time Diagnostic Table" INDEX { oaSfpDiagnosticSlotIndex, oaSfpDiagnosticPortIndex } ::= { oaSfpDiagnosticTable 1 } OaSfpDiagnosticEntry ::= SEQUENCE { oaSfpDiagnosticSlotIndex Integer32, oaSfpDiagnosticPortIndex Integer32, -- Real Time Readouts oaSfpDiagnosticTemperature Integer32, oaSfpDiagnosticVcc Integer32, oaSfpDiagnosticTxBias Integer32, oaSfpDiagnosticTxPower Integer32, oaSfpDiagnosticRxPower Integer32 } oaSfpDiagnosticSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SFP slot number" ::= { oaSfpDiagnosticEntry 1 } oaSfpDiagnosticPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SFP port number" ::= { oaSfpDiagnosticEntry 2 } oaSfpDiagnosticTemperature OBJECT-TYPE SYNTAX Integer32 UNITS "1/10 degrees Celsius (C)" MAX-ACCESS read-only STATUS current DESCRIPTION "Internaly measured module temperature. Units: 1/10 degrees Celsius (C)" ::= { oaSfpDiagnosticEntry 3 } oaSfpDiagnosticVcc OBJECT-TYPE SYNTAX Integer32 UNITS "100 micro Volts (V)" MAX-ACCESS read-only STATUS current DESCRIPTION "Internaly measured supply voltage in transceiver. Units: 100 micro Volts (V)" ::= { oaSfpDiagnosticEntry 4 } oaSfpDiagnosticTxBias OBJECT-TYPE SYNTAX Integer32 UNITS "1 micro Amperes (A)" MAX-ACCESS read-only STATUS current DESCRIPTION "Internaly measured Tx Bias current. Units: 1 micro Amperes (A)" ::= { oaSfpDiagnosticEntry 5 } oaSfpDiagnosticTxPower OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 decibel (dBm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Internaly measured Tx output power. Units: 0.01 decibel (dBm)" ::= { oaSfpDiagnosticEntry 6 } oaSfpDiagnosticRxPower OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 decibel (dBm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Internaly measured Rx input power. Units: 0.01 decibel (dBm)" ::= { oaSfpDiagnosticEntry 7 } ------------------------------------------------------------------------------ -- SFP Rates Supported Table ------------------------------------------------------------------------------ oaSfpRatesSupportedTable OBJECT-TYPE SYNTAX SEQUENCE OF OaSfpRatesSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sfp supported rates." ::= { oaSfpMIBObjects 4 } oaSfpRatesSupportedEntry OBJECT-TYPE SYNTAX OaSfpRatesSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SFP Supported rates list" INDEX { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaSfpRatesSupportedIndex } ::= { oaSfpRatesSupportedTable 1 } OaSfpRatesSupportedEntry ::= SEQUENCE { oaSfpRatesSupportedIndex Unsigned32, oaSfpRatesSupportedValue Unsigned32 } oaSfpRatesSupportedIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of rates database the SFP support." ::= { oaSfpRatesSupportedEntry 3 } oaSfpRatesSupportedValue OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate value the SFP support - unit are in 100m." ::= { oaSfpRatesSupportedEntry 4 } ------------------------------------------------------------------------------ -- XFP MIB Definitions ------------------------------------------------------------------------------ oaXfpCompatibleInterfaceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in the system which are xfp compatible" ::= { oaXfpMIBObjects 1 } ------------------------------------------------------------------------------ -- XFP Info Table ------------------------------------------------------------------------------ oaXfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OaXfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The XFP information table." ::= { oaXfpMIBObjects 2 } oaXfpInfoEntry OBJECT-TYPE SYNTAX OaXfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the XFP Information Table" INDEX { oaXfpInfoSlotIndex, oaXfpInfoPortIndex } ::= { oaXfpInfoTable 1 } OaXfpInfoEntry ::= SEQUENCE { oaXfpInfoSlotIndex Integer32, oaXfpInfoPortIndex Integer32, oaXfpInfoLaserWavelengthTolerance Integer32 } oaXfpInfoSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The XFP slot number" ::= { oaXfpInfoEntry 1 } oaXfpInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The XFP port number" ::= { oaXfpInfoEntry 2 } oaXfpInfoLaserWavelengthTolerance OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 Nano Meter(nm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Guaranteed +/- range of transmitter output wavelength under all normal operating conditions. Units: 0.001 Nano Meter(nm)" ::= { oaXfpInfoEntry 28 } ------------------------------------------------------------------------------ -- XFP Tunability Table ------------------------------------------------------------------------------ oaXfpTunTable OBJECT-TYPE SYNTAX SEQUENCE OF OaXfpTunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The XFP Tunability Parameters table." ::= { oaXfpMIBObjects 3 } oaXfpTunEntry OBJECT-TYPE SYNTAX OaXfpTunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the XFP Tunability Parameters Table" INDEX { oaXfpTunSlotIndex, oaXfpTunPortIndex } ::= { oaXfpTunTable 1 } OaXfpTunEntry ::= SEQUENCE { oaXfpTunSlotIndex Integer32, oaXfpTunPortIndex Integer32, oaXfpTunLaserFirstFrequency Integer32, oaXfpTunLaserLastFrequency Integer32, oaXfpTunGridSpacing INTEGER, oaXfpTunLaserItuBand INTEGER, oaXfpTunLaserItuCh Integer32 } oaXfpTunSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Tunable XFP slot number" ::= { oaXfpTunEntry 1 } oaXfpTunPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Tunable XFP port number" ::= { oaXfpTunEntry 2 } oaXfpTunLaserFirstFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 Terahertz(THz)" MAX-ACCESS read-only STATUS current DESCRIPTION "First Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz)" ::= { oaXfpTunEntry 3 } oaXfpTunLaserLastFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 Terahertz(THz)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz)" ::= { oaXfpTunEntry 4 } oaXfpTunGridSpacing OBJECT-TYPE SYNTAX INTEGER { unknown(1), g200(2), g100(3), g50(4), g25(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Tunable XFP port spacing. The port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz" ::= { oaXfpTunEntry 5 } oaXfpTunLaserItuBand OBJECT-TYPE SYNTAX INTEGER { unknown(1), cBand(2), lBand(3), sBand(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "ITU Band setting supported by the Tunable XFP port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band" ::= { oaXfpTunEntry 6 } oaXfpTunLaserItuCh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "ITU Channel number of the Tunable XFP port * 1000." ::= { oaXfpTunEntry 7 } ------------------------------------------------------------------------------ -- DWDM SFP MIB Definitions ------------------------------------------------------------------------------ oaDsfpCompatibleInterfaceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in the system which are DWDM sfp compatible" ::= { oaDsfpMIBObjects 1 } ------------------------------------------------------------------------------ -- DWDM SFP Info Table ------------------------------------------------------------------------------ oaDsfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OaDsfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DWDM SFP information table." ::= { oaDsfpMIBObjects 2 } oaDsfpInfoEntry OBJECT-TYPE SYNTAX OaDsfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the XFP Information Table" INDEX { oaDsfpInfoSlotIndex, oaDsfpInfoPortIndex } ::= { oaDsfpInfoTable 1 } OaDsfpInfoEntry ::= SEQUENCE { oaDsfpInfoSlotIndex Integer32, oaDsfpInfoPortIndex Integer32, oaDsfpInfoChannelSpacing INTEGER, oaDsfpInfoChannelTuning Integer32 } oaDsfpInfoSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DWDM SFP slot number" ::= { oaDsfpInfoEntry 1 } oaDsfpInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DWDM SFP port number" ::= { oaDsfpInfoEntry 2 } oaDsfpInfoChannelSpacing OBJECT-TYPE SYNTAX INTEGER { unknown(1), g200(2), g100(3), g50(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The densest channel spacing the modle is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz" ::= { oaDsfpInfoEntry 4 } oaDsfpInfoChannelTuning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of channel over which the module may be tuned by user command (1 - 63)." ::= { oaDsfpInfoEntry 5 } ------------------------------------------------------------------------------ -- MSA 300 Pin MIB Definitions ------------------------------------------------------------------------------ oaMsa300PinCompatibleIfCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in the system which are MSA 300 Pin compatible" ::= { oaMsa300PinMIBObjects 1 } ------------------------------------------------------------------------------ -- MSA 300 Pin Identifier Table ------------------------------------------------------------------------------ oaMsa300PinIdTable OBJECT-TYPE SYNTAX SEQUENCE OF OaMsa300PinIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Msa300Pin Identifier table." ::= { oaMsa300PinMIBObjects 2 } oaMsa300PinIdEntry OBJECT-TYPE SYNTAX OaMsa300PinIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Msa300Pin Identifier Table" INDEX { oaMsa300PinIdSlotIndex, oaMsa300PinIdPortIndex } ::= { oaMsa300PinIdTable 1 } OaMsa300PinIdEntry ::= SEQUENCE { oaMsa300PinIdSlotIndex Integer32, oaMsa300PinIdPortIndex Integer32, oaMsa300PinIdModuleTypeCode INTEGER, oaMsa300PinIdFirstLaserItuBand INTEGER, oaMsa300PinIdFirstLaserItuCh Integer32, oaMsa300PinIdLastLaserItuBand INTEGER, oaMsa300PinIdLastLaserItuCh Integer32, oaMsa300PinIdLaserItuChSpacing INTEGER, oaMsa300PinIdModuleDistanceType INTEGER, oaMsa300PinIdMinDispDist Integer32, oaMsa300PinIdMaxDispDist Integer32 } oaMsa300PinIdSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin slot number" ::= { oaMsa300PinIdEntry 1 } oaMsa300PinIdPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin port number" ::= { oaMsa300PinIdEntry 2 } oaMsa300PinIdModuleTypeCode OBJECT-TYPE SYNTAX INTEGER { unknown(1), msa10Gb(6), msa10GbWdm(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port Type code. unknown - Unknown msa10Gb - 10Gb MSA msa10GbWdm - 10Gb MSA WDM" ::= { oaMsa300PinIdEntry 4 } oaMsa300PinIdFirstLaserItuBand OBJECT-TYPE SYNTAX INTEGER { unknown(1), cBand(2), lBand(3), sBand(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "First ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band" ::= { oaMsa300PinIdEntry 6 } oaMsa300PinIdFirstLaserItuCh OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 Nano Meter(nm)" MAX-ACCESS read-only STATUS current DESCRIPTION "First ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm)" ::= { oaMsa300PinIdEntry 7 } oaMsa300PinIdLastLaserItuBand OBJECT-TYPE SYNTAX INTEGER { unknown(1), cBand(2), lBand(3), sBand(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Last ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band" ::= { oaMsa300PinIdEntry 8 } oaMsa300PinIdLastLaserItuCh OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 Nano Meter(nm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm)" ::= { oaMsa300PinIdEntry 9 } oaMsa300PinIdLaserItuChSpacing OBJECT-TYPE SYNTAX INTEGER { unknown(1), g200(2), g100(3), g50(4), g25(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The MSA 300 Pin port spacing the port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz" ::= { oaMsa300PinIdEntry 10 } oaMsa300PinIdModuleDistanceType OBJECT-TYPE SYNTAX INTEGER { unknown(1), msa40Km(2), msa80Km(3), msa120Km(4), msa160Km(5), msa200Km(6), msa340Km(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "MSA Module Distance Type. unknown - Unknown msa40Km(2) - 40 km distance, msa80Km(3) - 80 km distance, msa120Km(4) - 120 km distance, msa160Km(5) - 160 km distance, msa200Km(6) - 200 km distance, msa340Km(7) - 340 km distance." ::= { oaMsa300PinIdEntry 11 } oaMsa300PinIdMinDispDist OBJECT-TYPE SYNTAX Integer32 UNITS "ps/nm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm" ::= { oaMsa300PinIdEntry 12 } oaMsa300PinIdMaxDispDist OBJECT-TYPE SYNTAX Integer32 UNITS "ps/nm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm" ::= { oaMsa300PinIdEntry 13 } ------------------------------------------------------------------------------ -- MSA 300 Pin Measurement Table ------------------------------------------------------------------------------ oaMsa300PinMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF OaMsa300PinMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin Measurement table." ::= { oaMsa300PinMIBObjects 3 } oaMsa300PinMeasEntry OBJECT-TYPE SYNTAX OaMsa300PinMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MSA 300 Pin Measurement Table" INDEX { oaMsa300PinMeasSlotIndex, oaMsa300PinMeasPortIndex } ::= { oaMsa300PinMeasTable 1 } OaMsa300PinMeasEntry ::= SEQUENCE { oaMsa300PinMeasSlotIndex Integer32, oaMsa300PinMeasPortIndex Integer32, oaMsa300PinMeasLaserOutputPwrMon Integer32, oaMsa300PinMeasLaserTempMon Integer32, oaMsa300PinMeasRecSigAvrOptPower Integer32, oaMsa300PinMeasLaserWlengthMon Integer32, oaMsa300PinMeasTransTempMon Integer32 } oaMsa300PinMeasSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin slot number" ::= { oaMsa300PinMeasEntry 1 } oaMsa300PinMeasPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin port number" ::= { oaMsa300PinMeasEntry 2 } oaMsa300PinMeasLaserOutputPwrMon OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 decibel (dBm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Laser output power. Units: 0.01 decibel (dBm)" ::= { oaMsa300PinMeasEntry 4 } oaMsa300PinMeasLaserTempMon OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 degrees Celsius (C)" MAX-ACCESS read-only STATUS current DESCRIPTION "Laser temperature. Units: 0.001 degrees Celsius (C)" ::= { oaMsa300PinMeasEntry 5 } oaMsa300PinMeasRecSigAvrOptPower OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 decibel (dBm)" MAX-ACCESS read-only STATUS current DESCRIPTION "Average received optical power. Units: 0.01 decibel (dBm)" ::= { oaMsa300PinMeasEntry 7 } oaMsa300PinMeasLaserWlengthMon OBJECT-TYPE SYNTAX Integer32 UNITS "Mega Hertz (MHz)" MAX-ACCESS read-only STATUS current DESCRIPTION "The offset of the exact ITU channel wavelength. Units: Mega Hertz (MHz)" ::= { oaMsa300PinMeasEntry 8 } oaMsa300PinMeasTransTempMon OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 degrees Celsius (C)" MAX-ACCESS read-only STATUS current DESCRIPTION "Transponder Temperature. Units: 0.001 degrees Celsius (C)" ::= { oaMsa300PinMeasEntry 9 } ------------------------------------------------------------------------------ -- MSA 300 Pin Alarm Table ------------------------------------------------------------------------------ oaMsa300PinAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF OaMsa300PinAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin Alarm table." ::= { oaMsa300PinMIBObjects 4 } oaMsa300PinAlarmEntry OBJECT-TYPE SYNTAX OaMsa300PinAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MSA 300 Pin Alarm Table" INDEX { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex } ::= { oaMsa300PinAlarmTable 1 } OaMsa300PinAlarmEntry ::= SEQUENCE { oaMsa300PinAlarmSlotIndex Integer32, oaMsa300PinAlarmPortIndex Integer32, oaMsa300PinAlarmTxAlarm OCTET STRING, oaMsa300PinAlarmRxAlarm OCTET STRING, oaMsa300PinAlarmPsAlarm OCTET STRING } oaMsa300PinAlarmSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MSA 300 Pin slot number" ::= { oaMsa300PinAlarmEntry 1 } oaMsa300PinAlarmPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MSA 300 Pin port number" ::= { oaMsa300PinAlarmEntry 2 } oaMsa300PinAlarmTxAlarm OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x000000 ('0000 0000 0000 0000 0000 0000'B) - Normal (No alarm) 0x000001 ('0000 0000 0000 0000 0000 0001'B) - TxALM INT - Tx Summary alarm 0x000002 ('0000 0000 0000 0000 0000 0010'B) - Tunable DCM Not Ready alarm 0x000004 ('0000 0000 0000 0000 0000 0100'B) - LsTEMPALM - Laser temperature alarm 0x000008 ('0000 0000 0000 0000 0000 1000'B) - TxLOCKERR - Loss of TxPLL lock indicator 0x000020 ('0000 0000 0000 0000 0010 0000'B) - LsPOWALM - Laser power alarm 0x000200 ('0000 0000 0000 0010 0000 0000'B) - ModTEMPALM - Modulator temperature alarm 0x002000 ('0000 0000 0010 0000 0000 0000'B) - LsWAVALM - Laser Wavelength alarm Any combination of the bits represent the combination of the alarms" ::= { oaMsa300PinAlarmEntry 3 } oaMsa300PinAlarmRxAlarm OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x0000 ('0000 0000 0000 0000'B) - Normal (No alarm) 0x0001 ('0000 0000 0000 0001'B) - RxALM INT - Rx Summary alarm 0x0002 ('0000 0000 0000 0010'B) - RxPOWALM - Loss average optical power alarm Any combination of the bits represent the combination of the alarms" ::= { oaMsa300PinAlarmEntry 4} oaMsa300PinAlarmPsAlarm OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x00 ('0000 0000'B) - Normal (No alarm) 0x01 ('0000 0001'B) - PSUMMARY (poerw summary) 0x02 ('0000 0010'B) - P5VANALOG (+5V analog) 0x04 ('0000 0100'B) - N5P2VANALOG (-5.2V analog) 0x08 ('0000 1000'B) - P3P3VANALOG (_3.3V analog) 0x10 ('0001 0000'B) - P3P3VDIGITAL (+3.3V digital) 0x20 ('0010 0000'B) - LVDIGITAL (+1.8V digital) 0x40 ('0100 0000'B) - N5P2VDIGITAL (-5.2V digital) Any combination of the bits represent the combination of the alarms" ::= { oaMsa300PinAlarmEntry 5} ------------------------------------------------------------------------------ -- MSA 300 Pin Command Table ------------------------------------------------------------------------------ oaMsa300PinComTable OBJECT-TYPE SYNTAX SEQUENCE OF OaMsa300PinComEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin Command table." ::= { oaMsa300PinMIBObjects 5 } oaMsa300PinComEntry OBJECT-TYPE SYNTAX OaMsa300PinComEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MSA 300 Pin Command Table" INDEX { oaMsa300PinComSlotIndex, oaMsa300PinComPortIndex } ::= { oaMsa300PinComTable 1 } OaMsa300PinComEntry ::= SEQUENCE { oaMsa300PinComSlotIndex Integer32, oaMsa300PinComPortIndex Integer32, oaMsa300PinComLaserItuBand INTEGER, oaMsa300PinComLaserItuCh Integer32, oaMsa300PinComDispDist Integer32, oaMsa300PinComPolarityInversion INTEGER } oaMsa300PinComSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin slot number" ::= { oaMsa300PinComEntry 1 } oaMsa300PinComPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSA 300 Pin port number" ::= { oaMsa300PinComEntry 2 } oaMsa300PinComLaserItuBand OBJECT-TYPE SYNTAX INTEGER { unknown(1), cBand(2), lBand(3), sBand(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "ITU Band of the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band" ::= { oaMsa300PinComEntry 7 } oaMsa300PinComLaserItuCh OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 Nano Meter(nm)" MAX-ACCESS read-write STATUS current DESCRIPTION "ITU Channel wavelength of the port Units: 0.01 Nano Meter(nm)" ::= { oaMsa300PinComEntry 8 } oaMsa300PinComDispDist OBJECT-TYPE SYNTAX Integer32 UNITS "ps/nm" MAX-ACCESS read-write STATUS current DESCRIPTION "Dispersion distance of integrated TODC. Units: ps/nm" ::= { oaMsa300PinComEntry 9 } oaMsa300PinComPolarityInversion OBJECT-TYPE SYNTAX INTEGER { unknown(1), on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Polarity Inversion feature of the port. Supported for TM-DXFPT modules only, if this feature is defined for module." ::= { oaMsa300PinComEntry 10 } ------------------------------------------------------------------------------ -- conformance information ------------------------------------------------------------------------------ oaSfpConformance OBJECT IDENTIFIER ::= { oaSfpMib 2 } oaSfpGroups OBJECT IDENTIFIER ::= { oaSfpConformance 1 } oaSfpCompliances OBJECT IDENTIFIER ::= { oaSfpConformance 2 } ------------------------------------------------------------------------------ -- compliance statements ------------------------------------------------------------------------------ oaSfpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have SFP/DSFP/XFP/MSA300Pin module interfaces." MODULE -- this module MANDATORY-GROUPS { oaSfpCompatibleIfCountGroup, oaMsa300PinNotificationsGroup, oaPlugConnNotificationsGroup } GROUP oaSfpGroup DESCRIPTION "This group is mandatory for those port interfaces which are SFP ports." GROUP oaXfpGroup DESCRIPTION "This group is mandatory for those port interfaces which are XFP ports." GROUP oaDsfpGroup DESCRIPTION "This group is mandatory for those port interfaces which are DSFP ports." GROUP oaMsa300PinGroup DESCRIPTION "This group is mandatory for those port interfaces which are MSA 300 Pin ports." GROUP oaXfpTunGroup DESCRIPTION "This group is mandatory for those port interfaces which are Tunable XFP ports." ::= { oaSfpCompliances 1 } ------------------------------------------------------------------------------ -- units of conformance ------------------------------------------------------------------------------ oaSfpCompatibleIfCountGroup OBJECT-GROUP OBJECTS { oaSfpCompatibleInterfaceCount, oaXfpCompatibleInterfaceCount, oaDsfpCompatibleInterfaceCount, oaMsa300PinCompatibleIfCount } STATUS current DESCRIPTION "A collection of objects providing information on number of specific compatible ports." ::= { oaSfpGroups 1 } oaSfpGroup OBJECT-GROUP OBJECTS { oaSfpInfoIdentifier, oaSfpInfoVendorSpecificIdentifier, oaSfpInfoConnector, oaSfpInfoVendorSpecificConnector, oaSfpInfoTransceiver10GigaEth, oaSfpInfoTransceiverInfiniband, oaSfpInfoTransceiverEscon, oaSfpInfoTransceiverSonet, oaSfpInfoTransceiverEthernet, oaSfpInfoTransceiverFibreChannel, oaSfpInfoVendorName, oaSfpInfoVendorOUI, oaSfpInfoVendorPN, oaSfpInfoVendorRev, oaSfpInfoLaserWavelength, oaSfpTunability, oaSfpInfoVendorSN, oaSfpInfoVendorDate, oaSfpInfoVendorSpecificLotCode, oaSfpInfoVendorSpecificData, oaSfpInfoDiagnosticPowerType, oaSfpInfoDigitalDiagnostic, oaSfpInfoDiagnosticCalibration, oaSfpInfoInstalledStatus, oaSfpInfofaultStatus, oaSfpInfoEnableStatus, oaSfpDiagnosticTemperature, oaSfpDiagnosticVcc, oaSfpDiagnosticTxBias, oaSfpDiagnosticTxPower, oaSfpDiagnosticRxPower, oaSfpInfoSlotIndex, oaSfpInfoPortIndex } STATUS current DESCRIPTION "A collection of objects providing information on SFP compatible ports." ::= { oaSfpGroups 2 } oaXfpGroup OBJECT-GROUP OBJECTS { oaXfpInfoLaserWavelengthTolerance } STATUS current DESCRIPTION "A collection of objects providing information on XFP compatible ports." ::= { oaSfpGroups 3 } oaDsfpGroup OBJECT-GROUP OBJECTS { oaDsfpInfoChannelSpacing, oaDsfpInfoChannelTuning } STATUS current DESCRIPTION "A collection of objects providing information on DSFP compatible ports." ::= { oaSfpGroups 4 } oaMsa300PinGroup OBJECT-GROUP OBJECTS { oaMsa300PinIdModuleTypeCode, oaMsa300PinIdFirstLaserItuBand, oaMsa300PinIdFirstLaserItuCh, oaMsa300PinIdLastLaserItuBand, oaMsa300PinIdLastLaserItuCh, oaMsa300PinIdLaserItuChSpacing, oaMsa300PinIdModuleDistanceType, oaMsa300PinIdMinDispDist, oaMsa300PinIdMaxDispDist, oaMsa300PinMeasLaserOutputPwrMon, oaMsa300PinMeasLaserTempMon, oaMsa300PinMeasRecSigAvrOptPower, oaMsa300PinMeasLaserWlengthMon, oaMsa300PinMeasTransTempMon, oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaMsa300PinAlarmTxAlarm, oaMsa300PinAlarmRxAlarm, oaMsa300PinAlarmPsAlarm, oaMsa300PinComLaserItuBand, oaMsa300PinComLaserItuCh, oaMsa300PinComDispDist, oaMsa300PinComPolarityInversion } STATUS current DESCRIPTION "A collection of objects providing information on MSA 300 Pin compatible ports." ::= { oaSfpGroups 5 } oaMsa300PinNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { msaPortRxLossAlarmOn, msaPortRxLossAlarmOff, msaPortTxLaserWlAlarmOn, msaPorTxLaserWltAlarmOff, msaPortTxModulatorTempAlarmOn, msaPortTxModulatorTempAlarmOff, msaPortTxLaserPowerAlarmOn, msaPortTxLaserPowerAlarmOff, msaPortTxPllLockAlarmOn, msaPortTxPllLockAlarmOff, msaPortTxLaserTempAlarmOn, msaPortTxLaserTempAlarmOff } STATUS current DESCRIPTION "The notifications which are required to be supported by implementations of this MIB." ::= { oaSfpGroups 6 } oaPlugConnNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { pluggableConnectorInserted, pluggableConnectorRemoved, sfpXfpPortTempHighAlarmOn, sfpXfpPortTempHighAlarmOff, sfpXfpPortTempLowAlarmOn, sfpXfpPortTempLowAlarmOff, sfpXfpPortTxPowerHighAlarmOn, sfpXfpPortTxPowerHighAlarmOff, sfpXfpPortTxPowerLowAlarmOn, sfpXfpPortTxPowerLowAlarmOff, sfpXfpPortRxPowerHighAlarmOn, sfpXfpPortRxPowerHighAlarmOff, sfpXfpPortRxPowerLowAlarmOn, sfpXfpPortRxPowerLowAlarmOff } STATUS current DESCRIPTION "The notifications which are required to be supported by implementations of this MIB." ::= { oaSfpGroups 7 } oaXfpTunGroup OBJECT-GROUP OBJECTS { oaXfpTunLaserFirstFrequency, oaXfpTunLaserLastFrequency, oaXfpTunGridSpacing, oaXfpTunLaserItuBand, oaXfpTunLaserItuCh } STATUS current DESCRIPTION "A collection of objects providing information on Tunable XFP compatible ports." ::= { oaSfpGroups 8 } -- ******************************************************************* -- Notification Definition section -- ******************************************************************* msaPortRxLossAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been raised." ::= { oaAlarmNotifications 68 } msaPortRxLossAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been lowered." ::= { oaAlarmNotifications 69 } msaPortTxLaserWlAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been raised." ::= { oaAlarmNotifications 70 } msaPorTxLaserWltAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been lowered." ::= { oaAlarmNotifications 71 } msaPortTxModulatorTempAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been raised." ::= { oaAlarmNotifications 72 } msaPortTxModulatorTempAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been lowered." ::= { oaAlarmNotifications 73 } msaPortTxLaserPowerAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been raised." ::= { oaAlarmNotifications 74 } msaPortTxLaserPowerAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been lowered." ::= { oaAlarmNotifications 75 } msaPortTxPllLockAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been raised." ::= { oaAlarmNotifications 76 } msaPortTxPllLockAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been lowered." ::= { oaAlarmNotifications 77 } msaPortTxLaserTempAlarmOn NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been raised." ::= { oaAlarmNotifications 78 } msaPortTxLaserTempAlarmOff NOTIFICATION-TYPE OBJECTS { oaMsa300PinAlarmSlotIndex, oaMsa300PinAlarmPortIndex, oaDevTrapsPortsIfAlias } STATUS current DESCRIPTION "The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been lowered." ::= { oaAlarmNotifications 79 } pluggableConnectorInserted NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a pluggable connector/device is inserted into the specified slot and port." ::= { oaAlarmNotifications 80 } pluggableConnectorRemoved NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a pluggable connector/device is removed from the specified slot and port." ::= { oaAlarmNotifications 81 } sfpXfpPortTempHighAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's internal temperature exceeds high alarm level." ::= { oaAlarmNotifications 82 } sfpXfpPortTempHighAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's internal temperature returns below high alarm level." ::= { oaAlarmNotifications 83 } sfpXfpPortTempLowAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's internal temperature is below low alarm level." ::= { oaAlarmNotifications 84 } sfpXfpPortTempLowAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's internal temperature returns up low alarm level." ::= { oaAlarmNotifications 85 } sfpXfpPortTxPowerHighAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's TX output power exceeds high alarm level." ::= { oaAlarmNotifications 86 } sfpXfpPortTxPowerHighAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's TX output power returns below high alarm level." ::= { oaAlarmNotifications 87 } sfpXfpPortTxPowerLowAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's TX output power is below low alarm level." ::= { oaAlarmNotifications 88 } sfpXfpPortTxPowerLowAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's TX output power returns up low alarm level." ::= { oaAlarmNotifications 89 } sfpXfpPortRxPowerHighAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's Received power exceeds high alarm level." ::= { oaAlarmNotifications 90 } sfpXfpPortRxPowerHighAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's Received power returns below high alarm level." ::= { oaAlarmNotifications 91 } sfpXfpPortRxPowerLowAlarmOn NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's Received power is below low alarm level." ::= { oaAlarmNotifications 92 } sfpXfpPortRxPowerLowAlarmOff NOTIFICATION-TYPE OBJECTS { oaSfpInfoSlotIndex, oaSfpInfoPortIndex, oaDevTrapsPortsIfAlias} STATUS current DESCRIPTION "The SNMP trap that is generated when a SFP/XFP port's Received power returns up low alarm level." ::= { oaAlarmNotifications 93 } END