G6-PORT-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, enterprises,NOTIFICATION-TYPE
		FROM SNMPv2-SMI
	DisplayString, MacAddress
		FROM SNMPv2-TC
	g6	FROM MICROSENS-G6-MIB
	;

device MODULE-IDENTITY --Category
	LAST-UPDATED "201802121619Z"
	ORGANIZATION "MICROSENS GmbH & Co. KG"
	CONTACT-INFO
		"Kueferstrasse 16
		D-59067 Hamm
		Germany
		support@microsens.de
		http://www.microsens.de"
	DESCRIPTION
		"Microsens private MIB for Generation 6 Ethernet Switches"

	REVISION "201802121619Z"
	DESCRIPTION
		"File creation"
	::= { g6 1 }

port  OBJECT IDENTIFIER ::= { device 81 }



-- *************************** CONFIGURATION SECTION ********************************


-- ******************* Begin of configTable *************************

configTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF ConfigEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"This section defines the basic configuration parameter for each port."
	::= { port 1 }

configEntry	OBJECT-TYPE
	SYNTAX ConfigEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { configPortIndex }
	::= { configTable 1 }


	ConfigEntry ::= SEQUENCE {
	configPortIndex INTEGER,
	configAlias DisplayString,
	configPortOperation INTEGER ,
	configRole INTEGER ,
	configSpeed INTEGER ,
	configMtu INTEGER ,
	configLoopProtection INTEGER ,
	configAutoNegotiation INTEGER ,
	configFullDuplex INTEGER ,
	configFlowcontrol INTEGER ,
	configMdiMode INTEGER ,
	configEnergyEfficiency INTEGER ,
	configDualMediaMode INTEGER ,
	configAllowedOutgoingPorts INTEGER
	}

configPortIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..24)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { configEntry 1 }

configAlias OBJECT-TYPE   -- alias
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Alternative descriptive port name, user defineable."
	::= { configEntry 2 }

configPortOperation OBJECT-TYPE   -- port_operation
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Enables the port for operation. When disabled, port is shut down."
	::= { configEntry 3 }

configRole OBJECT-TYPE   -- role
	SYNTAX INTEGER 
		{
		default (0),
		local (1),
		uplink (2),
		downlink (3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in doubt leave at default setting."
	::= { configEntry 4 }

configSpeed OBJECT-TYPE   -- speed
	SYNTAX INTEGER 
		{
		ms10Mbit (0),
		ms100Mbit (1),
		ms1000Mbit (2),
		sfpAuto (3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertised on port."
	::= { configEntry 5 }

configMtu OBJECT-TYPE   -- mtu
	SYNTAX INTEGER 
		{
		ms1522Byte (0),
		ms2048Byte (1),
		ms10240Byte (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"MTU used only to have a place holder for SNMP ifTable"
	::= { configEntry 6 }

configLoopProtection OBJECT-TYPE   -- loop_protection
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port. This will result in a data loop of endless packets. Such a loop condition seriously affects network performance and must be avoided."
	::= { configEntry 7 }

configAutoNegotiation OBJECT-TYPE   -- auto_negotiation
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites. When Auto-Negotiation is disabled, the parameters speed, full_duplex and flow_control determine the fixed port configuration. Auto-Negotiation is not available for fiber ports in 100 Mbps mode and must be switched off."
	::= { configEntry 8 }

configFullDuplex OBJECT-TYPE   -- full_duplex
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determines the advertisement of full duplex capability."
	::= { configEntry 9 }

configFlowcontrol OBJECT-TYPE   -- flowcontrol
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capability. Flow control is only supported when port is in full duplex mode."
	::= { configEntry 10 }

configMdiMode OBJECT-TYPE   -- mdi_mode
	SYNTAX INTEGER 
		{
		auto (0),
		forceMdiStd (1),
		forceMdix (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed."
	::= { configEntry 11 }

configEnergyEfficiency OBJECT-TYPE   -- energy_efficiency
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode."
	::= { configEntry 12 }

configDualMediaMode OBJECT-TYPE   -- dual_media_mode
	SYNTAX INTEGER 
		{
		fiberPriority (0),
		copperPriority (1),
		forceFiber (2),
		forceCopper (3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Define media selection for dual media ports. This function is only available on ports with dual media Phy."
	::= { configEntry 13 }

configAllowedOutgoingPorts OBJECT-TYPE   -- allowed_outgoing_ports
	SYNTAX INTEGER
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)"
	::= { configEntry 14 }


-- ********************* End of configTable ***********************


-- ******************* Begin of monitorTable *************************

monitorTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF MonitorEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Port monitoring is a test tool which permits reading data from on port on another port for trouble shooting purposes."
	::= { port 2 }

monitorEntry	OBJECT-TYPE
	SYNTAX MonitorEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { monitorIndex }
	::= { monitorTable 1 }


	MonitorEntry ::= SEQUENCE {
	monitorIndex INTEGER,
	monitorMode INTEGER ,
	monitorSource INTEGER,
	monitorDestination Integer32 
	}

monitorIndex	OBJECT-TYPE
	SYNTAX INTEGER (0)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { monitorEntry 1 }

monitorMode OBJECT-TYPE   -- mode
	SYNTAX INTEGER 
		{
		disabled (0),
		txOnly (1),
		rxOnly (2),
		rxAndTx (3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines in which mode of port monitoring operation is used. Default is DISABLED for normal operation."
	::= { monitorEntry 2 }

monitorSource OBJECT-TYPE   -- source
	SYNTAX INTEGER
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Source port(2) of which the traffic is to be monitored. CLI Syntax: 1/1 for first port. 1/1,1/3 for first and third port"
	::= { monitorEntry 3 }

monitorDestination OBJECT-TYPE   -- destination
	SYNTAX Integer32 (0..65535)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Port on which the traffic monitored on the source port shall be copied to. Normally a network sniffer is connected to this port. Please observe that possibly the VLAN setting of the destination port must match the that of the monitored ports. CLI Syntax: 1/1 for first port."
	::= { monitorEntry 4 }


-- ********************* End of monitorTable ***********************


portRestartPort OBJECT-TYPE   -- restart_port
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"This function may be used to briefly disabled and enable the port. This may be used to restart port authentication for example. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: restart_port = 1/2,1/5.   "
	::= { port 3 }



-- ****************************** STATUS SECTION ********************************


portUplinkPorts OBJECT-TYPE   -- uplink_ports
	SYNTAX INTEGER
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates which port(s) are connected to the network. The setting is derived from default setting and may be overridden by port.role setting."
	::= { port 100 }


portDownlinkPorts OBJECT-TYPE   -- downlink_ports
	SYNTAX INTEGER
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates to which port(s) a downstream switch is connected. The setting is derived from default setting and may be overridden by port.role setting."
	::= { port 101 }


-- ******************* Begin of statusTable *************************

statusTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF StatusEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"This status table indicates current port status and (negotiated) settings. It also displays if a port is logically blocked due to a certain protocol condition."
	::= { port 102 }

statusEntry	OBJECT-TYPE
	SYNTAX StatusEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { statusPortIndex }
	::= { statusTable 1 }


	StatusEntry ::= SEQUENCE {
	statusPortIndex INTEGER,
	statusLinkUp INTEGER ,
	statusLastLinkChange DisplayString,
	statusLinkState INTEGER ,
	statusRxActivity INTEGER ,
	statusTxActivity INTEGER ,
	statusMediaUsed INTEGER ,
	statusSpeedUsed INTEGER ,
	statusLoopedPort INTEGER,
	statusFullDuplexUsed INTEGER ,
	statusFlowcontrolUsed INTEGER ,
	statusMdiUsed INTEGER ,
	statusEeeActive INTEGER ,
	statusBlockingAlgorithm BITS ,
	statusLearningAlgorithm BITS ,
	statusForwardingAlgorithm BITS ,
	statusUnauthorizedAlgorithm BITS 
	}

statusPortIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..31)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { statusEntry 1 }

statusLinkUp OBJECT-TYPE   -- link_up
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"False: Link is down, True: Link is up. For dual media ports this indicates the status of the active media."
	::= { statusEntry 2 }

statusLastLinkChange OBJECT-TYPE   -- last_link_change
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Time when the link_up status changed the last time. Value may appear illogical if the system time is not properly set."
	::= { statusEntry 3 }

statusLinkState OBJECT-TYPE   -- link_state
	SYNTAX INTEGER 
		{
		linkDown (0),
		blocking (1),
		learning (2),
		forwarding (3),
		unauthVlan (4)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Logical port status."
	::= { statusEntry 4 }

statusRxActivity OBJECT-TYPE   -- rx_activity
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates true when data activity on the receiver is detected."
	::= { statusEntry 5 }

statusTxActivity OBJECT-TYPE   -- tx_activity
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates true when data activity on the transmitter is detected."
	::= { statusEntry 6 }

statusMediaUsed OBJECT-TYPE   -- media_used
	SYNTAX INTEGER 
		{
		none (0),
		copper (1),
		fiber (2)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"indicates which media is used for dual media ports"
	::= { statusEntry 7 }

statusSpeedUsed OBJECT-TYPE   -- speed_used
	SYNTAX INTEGER 
		{
		down (0),
		ms10Mbit (1),
		ms100Mbit (2),
		ms1000Mbit (3)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Actual (negotiated) port data rate."
	::= { statusEntry 8 }

statusLoopedPort OBJECT-TYPE   -- looped_port
	SYNTAX INTEGER
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Usually empty. When a port loop is detected through loop protection function then the looped port is indicated here."
	::= { statusEntry 9 }

statusFullDuplexUsed OBJECT-TYPE   -- full_duplex_used
	SYNTAX INTEGER 
		{
		none (0),
		full (1),
		half (2)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"False: Half duplex, True: Full duplex."
	::= { statusEntry 10 }

statusFlowcontrolUsed OBJECT-TYPE   -- flowcontrol_used
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"False: No flow control, True: Use flow control."
	::= { statusEntry 11 }

statusMdiUsed OBJECT-TYPE   -- mdi_used
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"False: MDI pinout, True: MDI-X pinout."
	::= { statusEntry 12 }

statusEeeActive OBJECT-TYPE   -- eee_active
	SYNTAX INTEGER { false(0), true(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"When true Energy Efficent Ethernet is supported by both ends of the link and is active."
	::= { statusEntry 13 }

statusBlockingAlgorithm OBJECT-TYPE   -- blocking_algorithm
	SYNTAX BITS 
		{
		portIsEnabled (0),
		ms8021xApplies (1),
		rstpApplies (2),
		ringApplies (3),
		couplingApplies (4),
		loopPreventionApplies (5),
		macAuthApplies (6),
		bpduGuardApplies (7),
		dhcpFilterApplies (8)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Flags indicate blocking request by which algorithm per port."
	::= { statusEntry 14 }

statusLearningAlgorithm OBJECT-TYPE   -- learning_algorithm
	SYNTAX BITS 
		{
		portIsEnabled (0),
		ms8021xApplies (1),
		rstpApplies (2),
		ringApplies (3),
		couplingApplies (4),
		loopPreventionApplies (5),
		macAuthApplies (6),
		bpduGuardApplies (7),
		dhcpFilterApplies (8)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Flags indicate learning request by which algorithm per port."
	::= { statusEntry 15 }

statusForwardingAlgorithm OBJECT-TYPE   -- forwarding_algorithm
	SYNTAX BITS 
		{
		portIsEnabled (0),
		ms8021xApplies (1),
		rstpApplies (2),
		ringApplies (3),
		couplingApplies (4),
		loopPreventionApplies (5),
		macAuthApplies (6),
		bpduGuardApplies (7),
		dhcpFilterApplies (8)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Flags indicate forwarding request by which algorithm per port."
	::= { statusEntry 16 }

statusUnauthorizedAlgorithm OBJECT-TYPE   -- unauthorized_algorithm
	SYNTAX BITS 
		{
		portIsEnabled (0),
		ms8021xApplies (1),
		rstpApplies (2),
		ringApplies (3),
		couplingApplies (4),
		loopPreventionApplies (5),
		macAuthApplies (6),
		bpduGuardApplies (7),
		dhcpFilterApplies (8)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Flags indicate use of unauthorized vlan request by which algorithm per port."
	::= { statusEntry 17 }


-- ********************* End of statusTable ***********************



END