-- **************************************************************************** -- **************************************************************************** -- Copyright(c) 2004 Mediatrix Telecom, Inc. -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- **************************************************************************** -- **************************************************************************** MX-SNMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState, MxActivationState, MxIpHostName, MxIpAddress, MxIpPort, MxAdvancedIpPort, MxIpSubnetMask, MxDigitMap FROM MX-TC MxUInt64, MxFloat32, MxIpHostNamePort, MxIpAddr, MxIpAddrPort, MxIpAddrMask, MxUri, MxUrl FROM MX-TC2 mediatrixServices FROM MX-SMI2; snmpMIB MODULE-IDENTITY LAST-UPDATED "1910210000Z" ORGANIZATION " Mediatrix Telecom, Inc. " CONTACT-INFO " Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION " Simple Network Management Protocol The Simple Network Management Protocol (SNMP) service allows the administrator to manage the unit using the SNMP protocol. " ::= { mediatrixServices 900 } snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 } -- **************************************************************************** -- Group:SNMP Protocol -- Contains parameters for selecting the SNMP protocol with associated -- authentication and privacy settings. -- **************************************************************************** protocolGroup OBJECT IDENTIFIER ::= { snmpMIBObjects 200 } -- Scalar:Enable SNMPv1 enableSnmpV1 OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Enable SNMPv1 Specifies if a user can connect to the system by using SNMPv1. Please note that a 'public' user might be granted (unsecure) access by using v1 while an 'admin' user should rather be granted a v3 access. " DEFVAL { disable } ::= { protocolGroup 200 } -- Scalar:Enable SNMPv2 enableSnmpV2 OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Enable SNMPv2 Specifies if a user can connect to the system by using SNMPv2. Please note that a 'public' user might be granted (unsecure) access by using v2 while an 'admin' user should rather be granted a v3 access. " DEFVAL { disable } ::= { protocolGroup 300 } -- Scalar:Enable SNMPv3 enableSnmpV3 OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Enable SNMPv3 Specifies if a user can connect to the system by using SNMPv3. Please note that a 'public' user might be granted (unsecure) access by using v1 while an 'admin' user should rather be granted a v3 access. " DEFVAL { enable } ::= { protocolGroup 400 } -- Scalar:Authentication Protocol authProtocol OBJECT-TYPE SYNTAX INTEGER { md5(100) , sha1(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Authentication Protocol Protocol to use with SNMPv3. * Md5: MD5 encoding is used. * Sha1: SHA1 encoding is used. " DEFVAL { md5 } ::= { protocolGroup 500 } -- Scalar:Privacy Protocol privProtocol OBJECT-TYPE SYNTAX INTEGER { none(0) , des(100) } MAX-ACCESS read-write STATUS current DESCRIPTION " Privacy Protocol Protocol to use with SNMPv3. * None: No encryption is used. The PrivPassword parameter is ignored. * DES: DES encryption is used. " DEFVAL { none } ::= { protocolGroup 600 } -- Scalar:Privacy Password privPassword OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Privacy Password Password to use with SNMPv3 when using DES privacy. If 'None' is used, the PrivPassword parameter is ignored. " DEFVAL { "PrivPassword" } ::= { protocolGroup 700 } -- Scalar:Community community OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(1..32) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Community String to use for the community field of SNMPv1 and SNMPv2 read-write commands and traps. It must not be empty. The use of a community name provides context for agents receiving requests and initiating traps. An SNMP agent won't respond to a request from a management system outside its configured community. " DEFVAL { "public" } ::= { protocolGroup 800 } -- Scalar:Snmp User snmpUser OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Snmp User User name used by the SNMP v1/v2 to access the configuration. If this parameter is empty, the community name is used as the user name (see the Community parameter). Note: In both cases, if the provided user name does not exist in the AAA.UsersStatus table, the SNMP access will fail. " DEFVAL { "" } ::= { protocolGroup 900 } -- End of group:SNMP Protocol -- **************************************************************************** -- Group:Standard Traps -- Contains parameters that configure the behaviour of the standard traps. -- **************************************************************************** standardTrapsGroup OBJECT IDENTIFIER ::= { snmpMIBObjects 300 } -- Scalar:Trap Destination trapDest OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Trap Destination Addresses/FQDNs and ports where to send traps. Up to 5 comma-separated destinations can be specified. The port numbers are optional. Note that the traps are sent simultaneously to all resolved destinations. If an FQDN cannot be resolved, this destination will be skipped and will not receive the traps. " DEFVAL { "192.168.10.10:162" } ::= { standardTrapsGroup 100 } -- Scalar:Trap Enable enableTrap OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Trap Enable Specifies if traps can be sent. " DEFVAL { enable } ::= { standardTrapsGroup 200 } -- End of group:Standard Traps -- Scalar:Listen Port port OBJECT-TYPE SYNTAX MxIpPort MAX-ACCESS read-write STATUS current DESCRIPTION " Listen Port Port on which the SNMP service should listen for incoming SNMP requests. " DEFVAL { 161 } ::= { snmpMIBObjects 400 } -- *********************************************************************** -- Group:Statistics -- *********************************************************************** statisticsGroup OBJECT IDENTIFIER ::= { snmpMIBObjects 10000 } -- Scalar:Number of GET Requests statsGetRequest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of GET Requests Number of GET Requests handled by the service. " ::= { statisticsGroup 100 } -- Scalar:Number of GET-NEXT requests statsGetNextRequest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of GET-NEXT requests Number of GET-NEXT requests handled by the service. " ::= { statisticsGroup 200 } -- Scalar:Number of SET Requests statsSetRequest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of SET Requests Number of SET requests handled by the service. " ::= { statisticsGroup 300 } -- End of group:Statistics -- **************************************************************************** -- Group:Notification Messages Configuration -- **************************************************************************** notificationsGroup OBJECT IDENTIFIER ::= { snmpMIBObjects 60010 } -- Scalar:Minimal Severity of Notification minSeverity OBJECT-TYPE SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) , error(400) , critical (500) } MAX-ACCESS read-write STATUS current DESCRIPTION " Minimal Severity of Notification Sets the minimal severity to issue a notification message incoming from this service. * Disable: No notification is issued. * Debug: All notification messages are issued. * Info: Notification messages with a 'Informational' and higher severity are issued. * Warning: Notification messages with a 'Warning' and higher severity are issued. * Error: Notification messages with an 'Error' and higher severity are issued. * Critical: Notification messages with a 'Critical' severity are issued. " DEFVAL { warning } ::= { notificationsGroup 100 } -- End of group:Notification Messages Configuration -- **************************************************************************** -- Group:Configuration Settings -- **************************************************************************** configurationGroup OBJECT IDENTIFIER ::= { snmpMIBObjects 60020 } -- Scalar:Need Restart needRestartInfo OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " Need Restart Indicates if the service needs to be restarted for the configuration to fully take effect. * Yes: Service needs to be restarted. * No: Service does not need to be restarted. Services can be restarted by using the Scm.ServiceCommands.Restart command. " ::= { configurationGroup 100 } -- End of group:Configuration Settings END