-- **************************************************************************** -- **************************************************************************** -- Copyright(c) 2004 Mediatrix Telecom, Inc. -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- **************************************************************************** -- **************************************************************************** MX-LLDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState, MxActivationState, MxIpHostName, MxIpAddress, MxIpPort, MxAdvancedIpPort, MxIpSubnetMask, MxDigitMap FROM MX-TC MxUInt64, MxFloat32, MxIpHostNamePort, MxIpAddr, MxIpAddrPort, MxIpAddrMask, MxUri, MxUrl FROM MX-TC2 mediatrixServices FROM MX-SMI2; lldpMIB MODULE-IDENTITY LAST-UPDATED "1910210000Z" ORGANIZATION " Mediatrix Telecom, Inc. " CONTACT-INFO " Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION " Link Layer Discovery Protocol The Link Layer Discovery Protocol (LLDP) service manages the IEEE 802.1ab protocol used for advertising the unit's capabilities on the network. " ::= { mediatrixServices 4100 } lldpMIBObjects OBJECT IDENTIFIER ::= { lldpMIB 1 } -- **************************************************************************** -- Group:Status Group -- **************************************************************************** statusGroup OBJECT IDENTIFIER ::= { lldpMIBObjects 100 } -- *************************************************************************** -- Table:Remote Media Policy State -- *************************************************************************** remoteMediaPolicyStateTable OBJECT-TYPE SYNTAX SEQUENCE OF RemoteMediaPolicyStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Remote Media Policy State This table holds the LLDP network policies received. " ::= { statusGroup 100 } remoteMediaPolicyStateEntry OBJECT-TYPE SYNTAX RemoteMediaPolicyStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Remote Media Policy State. " INDEX { remoteMediaPolicyStateAppType } ::= { remoteMediaPolicyStateTable 1 } RemoteMediaPolicyStateEntry ::= SEQUENCE { remoteMediaPolicyStateAppType INTEGER, remoteMediaPolicyStateVlanId Unsigned32, remoteMediaPolicyStatePriority Unsigned32, remoteMediaPolicyStateDscp Unsigned32, remoteMediaPolicyStatePolicyFlag INTEGER, remoteMediaPolicyStateTaggedFlag INTEGER } -- Index:Application Type remoteMediaPolicyStateAppType OBJECT-TYPE SYNTAX INTEGER { unknown(0) , voice(1) , voiceSignaling(2) , guestVoice(3) , guestVoiceSignaling(4) , softPhoneVoice(5) , videoConferencing(6) , streamingVideo(7) , videoSignaling(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " Application Type The type of application. The supported types currently are: * Voice * VoiceSignaling All the other types received are ignored. " ::= { remoteMediaPolicyStateEntry 100 } -- Columnar:VLAN ID remoteMediaPolicyStateVlanId OBJECT-TYPE SYNTAX Unsigned32 ( 0..4094 ) MAX-ACCESS read-only STATUS current DESCRIPTION " VLAN ID VLAN ID. " ::= { remoteMediaPolicyStateEntry 200 } -- Columnar:802.1Q User Priority remoteMediaPolicyStatePriority OBJECT-TYPE SYNTAX Unsigned32 ( 0..7 ) MAX-ACCESS read-only STATUS current DESCRIPTION " 802.1Q User Priority 802.1Q User Priority. " ::= { remoteMediaPolicyStateEntry 300 } -- Columnar:DSCP (DiffServ) remoteMediaPolicyStateDscp OBJECT-TYPE SYNTAX Unsigned32 ( 0..255 ) MAX-ACCESS read-only STATUS current DESCRIPTION " DSCP (DiffServ) DSCP (DiffServ). " ::= { remoteMediaPolicyStateEntry 400 } -- Columnar:Policy Flag remoteMediaPolicyStatePolicyFlag OBJECT-TYPE SYNTAX INTEGER { defined(100) , unknown(200) } MAX-ACCESS read-only STATUS current DESCRIPTION " Policy Flag The Policy Flag. This flag indicates if an Endpoint Device wants to explicitly advertise that the network policy for a specific application type is required but is currently unknown. * Defined: The network policy is defined. * Unknown: The network policy for the specified application type is currently unknown. In this case, the VLAN ID, Layer 2 priority and DSCP values fields are ignored. " ::= { remoteMediaPolicyStateEntry 500 } -- Columnar:Tagged Flag remoteMediaPolicyStateTaggedFlag OBJECT-TYPE SYNTAX INTEGER { untagged(100) , tagged(200) } MAX-ACCESS read-only STATUS current DESCRIPTION " Tagged Flag The Tagged flag. * Untagged: An untagged value indicates that the device is using an untagged frame format and does not include a tag header. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance. * Tagged: A tagged value indicates that the device is using the tagged frame format and the that both the VLAN ID and the Layer 2 priority values are being used, as well as the DSCP value. " ::= { remoteMediaPolicyStateEntry 600 } -- End of table:Remote Media Policy State -- End of group:Status Group -- Scalar:Network Interface networkInterface OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Network Interface The network interface name on which LLDP should be enabled. Note that LLDP cannot be activated on multiple network interfaces simultaneously. " DEFVAL { "" } ::= { lldpMIBObjects 200 } -- Scalar:Chassis ID chassisId OBJECT-TYPE SYNTAX INTEGER { macAddress(100) , networkAddress(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Chassis ID The address type to populate the chassis ID. * MacAddress: The MAC address. * NetworkAddress: The IP address (or 0.0.0.0 if DHCP is not obtained yet). " DEFVAL { networkAddress } ::= { lldpMIBObjects 300 } -- Scalar:Override Network Policy Enable overrideNetworkPolicyEnable OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Override Network Policy Enable Enables the LLDP-MED protocol override of the VLAN ID, User Priority and DiffServ values. * Enable: The service listens for LLDP advertisements, and overrides the previously configured VLAN ID, User Priority and DiffServ with the values received. When a new VLAN ID is received, the LLDP service dynamically replaces the link of the network configured in the Lldp.NetworkInterface parameter. * Disable: The service only publishes its characteristics and configurations by LLDP, and does not override anything. " DEFVAL { disable } ::= { lldpMIBObjects 400 } -- Scalar:Refresh the applied Network Policy overrideNetworkPolicyRefresh OBJECT-TYPE SYNTAX INTEGER { disable(100) , onNetworkPolicyChanges(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Refresh the applied Network Policy Allows received Network Policies to refresh the VLAN ID, User Priority and DiffServ values of an overridden network. * Disable: The service applies only the first received Network Policy TLV. If a change occurs, the current Network Policy still applies. * OnNetworkPolicyChanges: The service applies the newly received Network Policy TLV, but only if the LLDPDU shares the same Chassis ID and Port ID. This parameter has no effect if the OverrideNetworkPolicyEnable parameter is set to 'Disable'. " DEFVAL { disable } ::= { lldpMIBObjects 410 } -- **************************************************************************** -- Group:Notification Messages Configuration -- **************************************************************************** notificationsGroup OBJECT IDENTIFIER ::= { lldpMIBObjects 60010 } -- Scalar:Minimal Severity of Notification minSeverity OBJECT-TYPE SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) , error(400) , critical (500) } MAX-ACCESS read-write STATUS current DESCRIPTION " Minimal Severity of Notification Sets the minimal severity to issue a notification message incoming from this service. * Disable: No notification is issued. * Debug: All notification messages are issued. * Info: Notification messages with a 'Informational' and higher severity are issued. * Warning: Notification messages with a 'Warning' and higher severity are issued. * Error: Notification messages with an 'Error' and higher severity are issued. * Critical: Notification messages with a 'Critical' severity are issued. " DEFVAL { warning } ::= { notificationsGroup 100 } -- End of group:Notification Messages Configuration -- **************************************************************************** -- Group:Configuration Settings -- **************************************************************************** configurationGroup OBJECT IDENTIFIER ::= { lldpMIBObjects 60020 } -- Scalar:Need Restart needRestartInfo OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " Need Restart Indicates if the service needs to be restarted for the configuration to fully take effect. * Yes: Service needs to be restarted. * No: Service does not need to be restarted. Services can be restarted by using the Scm.ServiceCommands.Restart command. " ::= { configurationGroup 100 } -- End of group:Configuration Settings END