-- **************************************************************************** -- **************************************************************************** -- -- Copyright(c) 2005 Mediatrix Telecom, Inc. -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- -- **************************************************************************** -- **************************************************************************** MX-DSL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mediatrixMgmt, mediatrixConfig FROM MX-SMI; dslMIB MODULE-IDENTITY LAST-UPDATED "200501050000Z" ORGANIZATION "Mediatrix Telecom, Inc." CONTACT-INFO "Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION "This MIB describes the parameters used by the DSL module." -- ************************************************************************ -- Revision history -- ************************************************************************ REVISION "200501260000Z" DESCRIPTION "Creation." REVISION "200501310000Z" DESCRIPTION "Revision by reviewer." REVISION "200502080000Z" DESCRIPTION "Corrections." ::= { mediatrixConfig 250 } dslMIBObjects OBJECT IDENTIFIER ::= { dslMIB 1 } dslConformance OBJECT IDENTIFIER ::= { dslMIB 2 } dslStatus OBJECT IDENTIFIER ::= { mediatrixMgmt 100 } -- Add the dsl general parameters dslModulation OBJECT-TYPE SYNTAX INTEGER { mMode(1), t1413(2), gDmt(3), gLite(4), adsl2(8), adsl2Delt(9), adsl2Plus(16), adsl2PlusDelt(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the modulation for the DSL modem. The accepted values for the configuration are: mMode: Autodetects the modulation of the DSLAM. t1413: T1.413 modulation mode. Supports the T1.413 standard. gDmt: G.DMT modulation mode. Supports the G992.1 standard. gLite: G.Lite modulation mode. Supports the G992.2 standard. adsl2: ADSL2 modulation mode. Supports the G992.3 standard. adsl2Delt: ADSL2 DELT modulation mode. Supports the G992.3 DELT standard. adsl2Plus: ADSL2+ modulation mode. Supports the G992.5 standard. adsl2PlusDelt: ADSL2+ DELT modulation mode. Supports the G992.5 DELT standard." DEFVAL { mMode } ::= { dslMIBObjects 50 } dslModemState OBJECT-TYPE SYNTAX INTEGER { unconnected(0), connecting(1), connected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current state of the DSL modem. Correct values are: unconnected: The modem is waiting for a connection or a modulation change. connecting: The modem is connected and getting ready to perform with a specific modulation. Training between the modem and DSLAM is taking place. connected: The modem is connected and ready to transmit and receive." ::= { dslStatus 100 } dslTrainedPath OBJECT-TYPE SYNTAX INTEGER { fast(0), interleaved(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the trained path type of the DSL modem. The accepted values for the configuration are: fast: Fast path interleaved: Interleaved path" ::= { dslStatus 150 } dslTrainedModulation OBJECT-TYPE SYNTAX INTEGER { notTrained(0), t1413(2), gDmt(3), gLite(4), adsl2(8), adsl2Delt(9), adsl2Plus(16), adsl2PlusDelt(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the trained modulation of the DSL modem. The values meaning are: notTrained(0): The modem has not trained with the DSLAM. t1413: T1.413 modulation mode. Supports the T1.413 standard. gDmt: G.DMT modulation mode. Supports the G992.1 standard. gLite: G.Lite modulation mode. Supports the G992.2 standard. adsl2: ADSL2 modulation mode. Supports the G992.3 standard. adsl2Delt: ADSL2 DELT modulation mode. Supports the G992.3 DELT standard. adsl2Plus: ADSL2+ modulation mode. Supports the G992.5 standard. adsl2PlusDelt: ADSL2+ DELT modulation mode. Supports the G992.5 DELT standard." ::= { dslStatus 200 } -- ************************************************************************* -- dslModemStats -- ************************************************************************* dslModemStats OBJECT IDENTIFIER ::= { dslStatus 5000 } dslModemTxConnectionRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate (KBps) of the upstream connection." ::= { dslModemStats 50 } dslModemRxConnectionRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate (KBps) of the downstream connection." ::= { dslModemStats 100 } dslModemTxLineAttenuation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream line attenuation (dB). " ::= { dslModemStats 150 } dslModemRxLineAttenuation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream line attenuation (dB)." ::= { dslModemStats 200 } dslModemTxMargin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream line margin (dB). " ::= { dslModemStats 250 } dslModemRxMargin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream line margin (dB)." ::= { dslModemStats 300 } dslModemTxPayload OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream payload size (bytes)." ::= { dslModemStats 350 } dslModemRxPayload OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream payload size (bytes)." ::= { dslModemStats 400 } dslModemTxSuperframeCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of superframes sent since the last reset." ::= { dslModemStats 450 } dslModemRxSuperframeCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of superframes received since the last reset." ::= { dslModemStats 500 } dslModemLossOfSignalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts how many loss of signal occurred since the last reset" ::= { dslModemStats 650 } dslModemSeverlyErroredFrameCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts how many severly errored frames were received since the last reset" ::= { dslModemStats 700 } dslModemTxPeakCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak (ATM) cell rate observed by the modem (cells per second)." ::= { dslModemStats 750 } -- ************************************************************************* -- dslModemStats / interleavedPath -- ************************************************************************* interleavedPath OBJECT IDENTIFIER ::= { dslModemStats 5000 } interleavedPathRxCrcError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of CRC errors received by the interleaved path since the last reset." ::= { interleavedPath 100 } interleavedPathTxCrcError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of CRC errors caused by the modem interleaved path since the last reset." ::= { interleavedPath 50 } -- ************************************************************************* -- dslModemStats / fastPath -- ************************************************************************* fastPath OBJECT IDENTIFIER ::= { dslModemStats 8000 } fastPathTxCrcError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of CRC errors caused by the modem fast path since the last reset." ::= { fastPath 50 } fastPathRxCrcError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of CRC errors received by the fast path since the last reset." ::= { fastPath 100 } -- ************************************************************************* -- Conformance information -- ************************************************************************* dslCompliances OBJECT IDENTIFIER ::= { dslConformance 1 } dslComplVer1 MODULE-COMPLIANCE STATUS current DESCRIPTION "List of groups required to support a DSL Modem." MODULE -- This Module MANDATORY-GROUPS { dslModemVer1, dslStatsVer1 } ::= { dslCompliances 1 } -- ************************************************************************* -- MIB variable grouping -- ************************************************************************* dslGroups OBJECT IDENTIFIER ::= { dslConformance 5 } dslModemVer1 OBJECT-GROUP OBJECTS { dslModulation } STATUS current DESCRIPTION "A collection of objects that defines the characteristics of a DSL modem." ::= { dslGroups 50 } dslStatsVer1 OBJECT-GROUP OBJECTS { dslModemState, dslTrainedPath, dslTrainedModulation, dslModemTxConnectionRate, dslModemRxConnectionRate, dslModemTxLineAttenuation, dslModemRxLineAttenuation, dslModemTxMargin, dslModemRxMargin, dslModemTxPayload, dslModemRxPayload, dslModemTxSuperframeCnt, dslModemRxSuperframeCnt, dslModemLossOfSignalCount, dslModemSeverlyErroredFrameCount, dslModemTxPeakCellRate, interleavedPathRxCrcError, interleavedPathTxCrcError, fastPathTxCrcError, fastPathRxCrcError } STATUS current DESCRIPTION "A collection of objects that defines the statistics of a DSL modem." ::= { dslGroups 100 } END