INFINET-EXTCES-UNIT0-DS1-MIB DEFINITIONS ::= BEGIN IMPORTS transmission, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI -- [RFC2578] DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC -- [RFC2579] InterfaceIndex, ifIndex FROM IF-MIB -- [RFC2863] PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB -- [RFC3593] cesOverWlanUnit0 FROM INFINET-EXTCES-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; cesOverWlanUnit0Ds1 MODULE-IDENTITY LAST-UPDATED "200706181910Z" ORGANIZATION "Infinet Wireless Ltd." CONTACT-INFO "Dmitry Petukhov Postal: Infinet Wireless Ltd, Russia, Ekaterinburg, Serafimi Deryabinoi st, 24 Phone: +7 343 217 9317 Email: d.petukhov@infinetwireless.com" DESCRIPTION "The mib module, containing various WanFlex options." REVISION "200408161910Z" DESCRIPTION "The mib module, containing DS1 objects for CesOverWlan unit. (adapted from rfc4805.txt)" ::= { cesOverWlanUnit0 2 } cesOverWlanUnit0Dsx1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CesOverWlanUnit0Dsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Configuration table." ::= { cesOverWlanUnit0Ds1 6 } cesOverWlanUnit0Dsx1ConfigEntry OBJECT-TYPE SYNTAX CesOverWlanUnit0Dsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Configuration table." INDEX { cesOverWlanUnit0Dsx1LineIndex } ::= { cesOverWlanUnit0Dsx1ConfigTable 1 } CesOverWlanUnit0Dsx1ConfigEntry ::= SEQUENCE { cesOverWlanUnit0Dsx1LineIndex InterfaceIndex, cesOverWlanUnit0Dsx1IfIndex InterfaceIndex, cesOverWlanUnit0Dsx1TimeElapsed INTEGER, cesOverWlanUnit0Dsx1ValidIntervals INTEGER, cesOverWlanUnit0Dsx1LineType INTEGER, cesOverWlanUnit0Dsx1LineCoding INTEGER, cesOverWlanUnit0Dsx1SendCode INTEGER, cesOverWlanUnit0Dsx1CircuitIdentifier DisplayString, cesOverWlanUnit0Dsx1LoopbackConfig INTEGER, cesOverWlanUnit0Dsx1LineStatus INTEGER, cesOverWlanUnit0Dsx1SignalMode INTEGER, cesOverWlanUnit0Dsx1TransmitClockSource INTEGER, cesOverWlanUnit0Dsx1Fdl INTEGER, cesOverWlanUnit0Dsx1InvalidIntervals INTEGER, cesOverWlanUnit0Dsx1LineLength INTEGER, cesOverWlanUnit0Dsx1LineStatusLastChange TimeStamp, cesOverWlanUnit0Dsx1LineStatusChangeTrapEnable INTEGER, cesOverWlanUnit0Dsx1LoopbackStatus INTEGER, cesOverWlanUnit0Dsx1Ds1ChannelNumber INTEGER, cesOverWlanUnit0Dsx1Channelization INTEGER, cesOverWlanUnit0Dsx1LineMode INTEGER, cesOverWlanUnit0Dsx1LineBuildOut INTEGER, cesOverWlanUnit0Dsx1LineImpedance INTEGER } cesOverWlanUnit0Dsx1LineIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of the ifStackTable and ds0/ds0bundle MIBs. Previously, this object was the identifier of a DS1 interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, number the dsx1LineIndices with a unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers." ::= { cesOverWlanUnit0Dsx1ConfigEntry 1 } cesOverWlanUnit0Dsx1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This value for this object is equal to the value of ifIndex from the Interfaces table (RFC 2863)." ::= { cesOverWlanUnit0Dsx1ConfigEntry 2 } cesOverWlanUnit0Dsx1TimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the near-end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { cesOverWlanUnit0Dsx1ConfigEntry 3 } cesOverWlanUnit0Dsx1ValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous near-end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15-minute near-end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { cesOverWlanUnit0Dsx1ConfigEntry 4 } cesOverWlanUnit0Dsx1LineType OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1Unframed(8), dsx1E1Unframed(9), dsx1DS2M12(10), dsx1E2(11), dsx1E1Q50(12), dsx1E1Q50CRC(13), dsx1J1ESF(14), dsx1J1Unframed(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107) dsx1E1 ITU-T G.704, (Table 5A) dsx1E1-CRC ITU-T G.704, (Table 5B) dsxE1-MF G.704 (Table 5A) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 5B) with TS16 multiframing enabled dsx1Unframed DS1 with No Framing dsx1E1Unframed E1 with No Framing (G.703) dsx1DS2M12 DS2 frame format (T1.107) dsx1E2 E2 frame format (G.704) dsx1E1Q50 TS16 bits 5,7,8 set to 101, [in all other cases it is set to 111.] (G.704, table 14) dsx1E1Q50CRC E1Q50 with CRC dsx1J1ESF J1 according to (JT-G704, JT-G706, and JT-I431) dsx1J1Unframed J1 with No Framing For clarification, the capacity for each E1 type is as listed below: dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k dsx1E1 or dsx1E1CRC - E1, with framing, no signalling = 31 x 64k = 1984k dsx1E1MF or dsx1E1CRCMF - E1, with framing, signalling = 30 x 64k = 1920k" REFERENCE "American National Standard for telecommunications - digital hierarchy - formats specification, ANSI T1.107- 1988. ITU-T G.703: Physical/Electrical Characteristics of Hierarchical Digital Interfaces, November 2001. ITU-T G.704: Synchronous frame structures used at 1544, 6312, 2048, 8488 and 44 736 kbit/s Hierarchical Levels, July 1995. JT-G704: Synchronous frame structures used at Primary and Secondary Hierarchical Levels,2002. JT-G706. Frame Alignment and Cyclic Redundancy Check (CRC) Procedures. JT-I431. ISDN Primary Rate User-Network Interface, Layer 1 Specifications, 2002" ::= { cesOverWlanUnit0Dsx1ConfigEntry 5 } cesOverWlanUnit0Dsx1LineCoding OBJECT-TYPE SYNTAX INTEGER { dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1ZBTSI(4), dsx1AMI(5), other(6), dsx1B6ZS(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8-bit period is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only 7 bits per channel, or 1.344 Mbps, are available for data. dsx1B8ZS refers to the use of a specified pattern of normal bits and bipolar violations that are used to replace a sequence of 8 zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no Zero Code Suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data that meets or exceeds the pulse density requirements, such as inverting HDLC data. dsx1B6ZS refers to the user of a specified pattern of normal bits and bipolar violations that are used to replace a sequence of 6 zero bits. Used for DS2. For more information about line coding see [ANSI-T1.102]" ::= { cesOverWlanUnit0Dsx1ConfigEntry 6 } cesOverWlanUnit0Dsx1SendCode OBJECT-TYPE SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS1 interface by the device. The values mean the following: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern dsx1Send511Pattern sending a 511-bit fixed test pattern dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 dsx1SendOtherTestPattern sending a test pattern other than those described by this object" ::= { cesOverWlanUnit0Dsx1ConfigEntry 7 } cesOverWlanUnit0Dsx1CircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." REFERENCE "ITU-T M.1400" ::= { cesOverWlanUnit0Dsx1ConfigEntry 8 } cesOverWlanUnit0Dsx1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4), dsx1InwardLoop(5), dsx1DualLoop(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. dsx1PayloadLoop the received signal at this interface is looped through the device. Typically, the received signal is looped back for retransmission after it has passed through the device's framing function. dsx1LineLoop the received signal at this interface does not go through the device (minimum penetration) but is looped back out. dsx1OtherLoop loopbacks that are not defined here. dsx1InwardLoop the transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dsx1DualLoop both dsx1LineLoop and dsx1InwardLoop will be active simultaneously." ::= { cesOverWlanUnit0Dsx1ConfigEntry 9 } cesOverWlanUnit0Dsx1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the line status of the interface. It contains loopback, failure, received alarm and transmitted alarms information. The cesOverWlanUnit0Dsx1LineStatus is a bitmap represented as a sum; therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm must be set if and only if no other flag is set. If the dsx1loopbackState bit is set, the loopback in effect can be determined from the dsx1loopbackConfig object. The various bit positions are as follows: 1 dsx1NoAlarm No alarm present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a. Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a. Red Alarm) 64 dsx1LossOfSignal Near end Loss of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far end sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near end sending TS16 LOMF 2048 dsx1RcvTestCode Near end detects a test code 4096 dsx1OtherFailure Any line status not defined here 8192 dsx1UnavailSigState Near end in unavailable signal state 16384 dsx1NetEquipOOS Carrier equipment out of service 32768 dsx1RcvPayloadAIS DS2 payload AIS 65536 dsx1Ds2PerfThreshold DS2 performance threshold exceeded" ::= { cesOverWlanUnit0Dsx1ConfigEntry 10 } cesOverWlanUnit0Dsx1SignalMode OBJECT-TYPE SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3), messageOriented(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated Signaling is in use. 'messageOriented' indicates that Common Channel Signaling is in use on either channel 16 of an E1 link or channel 24 of a DS1." ::= { cesOverWlanUnit0Dsx1ConfigEntry 11 } cesOverWlanUnit0Dsx1TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), throughTiming(3), adaptive(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of transmit clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock. 'adaptive' indicates that the clock is recovered based on the data flow and not based on the physical layer" ::= { cesOverWlanUnit0Dsx1ConfigEntry 12 } cesOverWlanUnit0Dsx1Fdl OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmap describes the use of the facilities data link and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), dsx1Att54016(4), dsx1FdlNone(8) 'other' indicates that a protocol other than one of the following is used. 'dsx1AnsiT1403' refers to the FDL exchange recommended by ANSI. 'dsx1Att54016' refers to ESF FDL exchanges. 'dsx1FdlNone' indicates that the device does not use the FDL." ::= { cesOverWlanUnit0Dsx1ConfigEntry 13 } cesOverWlanUnit0Dsx1InvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to cesOverWlanUnit0Dsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals is not available (e.g., in proxy situations)." ::= { cesOverWlanUnit0Dsx1ConfigEntry 14 } cesOverWlanUnit0Dsx1LineLength OBJECT-TYPE SYNTAX INTEGER (0..64000) UNITS "meters" MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the DS1 line in meters. This object provides information for line build-out circuitry. This object is only useful if the interface has configurable line build-out circuitry." ::= { cesOverWlanUnit0Dsx1ConfigEntry 15 } cesOverWlanUnit0Dsx1LineStatusLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value." ::= { cesOverWlanUnit0Dsx1ConfigEntry 16 } cesOverWlanUnit0Dsx1LineStatusChangeTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether cesOverWlanUnit0Dsx1LineStatusChange traps should be generated for this interface." DEFVAL { disabled } ::= { cesOverWlanUnit0Dsx1ConfigEntry 17 } cesOverWlanUnit0Dsx1LoopbackStatus OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The cesOverWlanUnit0Dsx1LoopbackStatus is a bitmap represented as a sum; therefore, it can represent multiple loopbacks simultaneously. The various bit positions are as follows: 1 dsx1NoLoopback 2 dsx1NearEndPayloadLoopback 4 dsx1NearEndLineLoopback 8 dsx1NearEndOtherLoopback 16 dsx1NearEndInwardLoopback 32 dsx1FarEndPayloadLoopback 64 dsx1FarEndLineLoopback" ::= { cesOverWlanUnit0Dsx1ConfigEntry 18 } cesOverWlanUnit0Dsx1Ds1ChannelNumber OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicates that this DS1/E1 does not have a parent DS3/E3." ::= { cesOverWlanUnit0Dsx1ConfigEntry 19 } cesOverWlanUnit0Dsx1Channelization OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabledDs0(2), enabledDs1(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this DS1/E1 or DS2 is channelized or unchannelized. The value of enabledDs0(2) indicates that this is a DS1 channelized into DS0s. Setting this value will cause the creation, and resetting it to disabled(1) will cause the deletion of entries in the ifTable for the DS0s that are within the DS1. The value of enabledDs1(3) indicates that this is a DS2 channelized into DS1s. Setting this value will cause the creation, and resetting it to disabled(1) will cause the deletion of entries in the ifTable for the DS1s that are within the DS2." ::= { cesOverWlanUnit0Dsx1ConfigEntry 20 } cesOverWlanUnit0Dsx1LineMode OBJECT-TYPE SYNTAX INTEGER { csu(1), dsu(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This setting puts the T1 framer into either long-haul (CSU) mode or short-haul (DSU) mode." ::= { cesOverWlanUnit0Dsx1ConfigEntry 21 } cesOverWlanUnit0Dsx1LineBuildOut OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), neg75dB(2), neg15dB(3), neg225dB(4), zerodB(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation setting for T1 framer in long haul (CSU) mode. The optional values are -7.5dB, -15dB, -22.5dB, and 0dB." ::= { cesOverWlanUnit0Dsx1ConfigEntry 22 } cesOverWlanUnit0Dsx1LineImpedance OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), unbalanced75ohms(2), balanced100ohms(3), balanced120ohms(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Nominal line impedance. For T1 and J1 lines, the value is typically balanced100ohms(3). For E1 lines, the value is typically unbalanced75ohms(2) and balanced120ohms(4). When this object does not apply, or when the appropriate value is not known, the value should be set to notApplicable(1)." ::= { cesOverWlanUnit0Dsx1ConfigEntry 23 } -- The DS1 Current Table cesOverWlanUnit0Dsx1CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF CesOverWlanUnit0Dsx1CurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Current table contains various statistics being collected for the current 15-minute interval." ::= { cesOverWlanUnit0Ds1 7 } cesOverWlanUnit0Dsx1CurrentEntry OBJECT-TYPE SYNTAX CesOverWlanUnit0Dsx1CurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Current table." INDEX { cesOverWlanUnit0Dsx1CurrentIndex } ::= { cesOverWlanUnit0Dsx1CurrentTable 1 } CesOverWlanUnit0Dsx1CurrentEntry ::= SEQUENCE { cesOverWlanUnit0Dsx1CurrentIndex InterfaceIndex, cesOverWlanUnit0Dsx1CurrentESs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentSESs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentSEFSs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentUASs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentCSSs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentPCVs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentLESs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentBESs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentDMs PerfCurrentCount, cesOverWlanUnit0Dsx1CurrentLCVs PerfCurrentCount } cesOverWlanUnit0Dsx1CurrentIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a cesOverWlanUnit0Dsx1LineIndex object instance." ::= { cesOverWlanUnit0Dsx1CurrentEntry 1 } cesOverWlanUnit0Dsx1CurrentESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 2 } cesOverWlanUnit0Dsx1CurrentSESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 3 } cesOverWlanUnit0Dsx1CurrentSEFSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 4 } cesOverWlanUnit0Dsx1CurrentUASs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 5 } cesOverWlanUnit0Dsx1CurrentCSSs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 6 } cesOverWlanUnit0Dsx1CurrentPCVs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations." ::= { cesOverWlanUnit0Dsx1CurrentEntry 7 } cesOverWlanUnit0Dsx1CurrentLESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 8 } cesOverWlanUnit0Dsx1CurrentBESs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds." ::= { cesOverWlanUnit0Dsx1CurrentEntry 9 } cesOverWlanUnit0Dsx1CurrentDMs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of Degraded Minutes." ::= { cesOverWlanUnit0Dsx1CurrentEntry 10 } cesOverWlanUnit0Dsx1CurrentLCVs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations (LCVs)." ::= { cesOverWlanUnit0Dsx1CurrentEntry 11 } -- The DS1 Interval Table cesOverWlanUnit0Dsx1IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF CesOverWlanUnit0Dsx1IntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Interval table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15-minute intervals. Each row in this table represents one such interval (identified by cesOverWlanUnit0Dsx1IntervalNumber) for one specific instance (identified by cesOverWlanUnit0Dsx1IntervalIndex)." ::= { cesOverWlanUnit0Ds1 8 } cesOverWlanUnit0Dsx1IntervalEntry OBJECT-TYPE SYNTAX CesOverWlanUnit0Dsx1IntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Interval table." INDEX { cesOverWlanUnit0Dsx1IntervalIndex, cesOverWlanUnit0Dsx1IntervalNumber } ::= { cesOverWlanUnit0Dsx1IntervalTable 1 } CesOverWlanUnit0Dsx1IntervalEntry ::= SEQUENCE { cesOverWlanUnit0Dsx1IntervalIndex InterfaceIndex, cesOverWlanUnit0Dsx1IntervalNumber INTEGER, cesOverWlanUnit0Dsx1IntervalESs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalSESs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalSEFSs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalUASs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalCSSs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalPCVs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalLESs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalBESs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalDMs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalLCVs PerfIntervalCount, cesOverWlanUnit0Dsx1IntervalValidData TruthValue } cesOverWlanUnit0Dsx1IntervalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a cesOverWlanUnit0Dsx1LineIndex object instance." ::= { cesOverWlanUnit0Dsx1IntervalEntry 1 } cesOverWlanUnit0Dsx1IntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the 15-minute interval completed 23 hours and 45 minutes prior to interval 1." ::= { cesOverWlanUnit0Dsx1IntervalEntry 2 } cesOverWlanUnit0Dsx1IntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 3 } cesOverWlanUnit0Dsx1IntervalSESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 4 } cesOverWlanUnit0Dsx1IntervalSEFSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 5 } cesOverWlanUnit0Dsx1IntervalUASs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds. This object may decrease if the occurrence of unavailable seconds occurs across an interval boundary." ::= { cesOverWlanUnit0Dsx1IntervalEntry 6 } cesOverWlanUnit0Dsx1IntervalCSSs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 7 } cesOverWlanUnit0Dsx1IntervalPCVs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations." ::= { cesOverWlanUnit0Dsx1IntervalEntry 8 } cesOverWlanUnit0Dsx1IntervalLESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 9 } cesOverWlanUnit0Dsx1IntervalBESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds." ::= { cesOverWlanUnit0Dsx1IntervalEntry 10 } cesOverWlanUnit0Dsx1IntervalDMs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of Degraded Minutes." ::= { cesOverWlanUnit0Dsx1IntervalEntry 11 } cesOverWlanUnit0Dsx1IntervalLCVs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations." ::= { cesOverWlanUnit0Dsx1IntervalEntry 12 } cesOverWlanUnit0Dsx1IntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether the data for this interval is valid." ::= { cesOverWlanUnit0Dsx1IntervalEntry 13 } -- The DS1 Total Table cesOverWlanUnit0Dsx1TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF CesOverWlanUnit0Dsx1TotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Total table contains the cumulative sum of the various statistics for the 24-hour period preceding the current interval." ::= { cesOverWlanUnit0Ds1 9 } cesOverWlanUnit0Dsx1TotalEntry OBJECT-TYPE SYNTAX CesOverWlanUnit0Dsx1TotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Total table." INDEX { cesOverWlanUnit0Dsx1TotalIndex } ::= { cesOverWlanUnit0Dsx1TotalTable 1 } CesOverWlanUnit0Dsx1TotalEntry ::= SEQUENCE { cesOverWlanUnit0Dsx1TotalIndex InterfaceIndex, cesOverWlanUnit0Dsx1TotalESs PerfTotalCount, cesOverWlanUnit0Dsx1TotalSESs PerfTotalCount, cesOverWlanUnit0Dsx1TotalSEFSs PerfTotalCount, cesOverWlanUnit0Dsx1TotalUASs PerfTotalCount, cesOverWlanUnit0Dsx1TotalCSSs PerfTotalCount, cesOverWlanUnit0Dsx1TotalPCVs PerfTotalCount, cesOverWlanUnit0Dsx1TotalLESs PerfTotalCount, cesOverWlanUnit0Dsx1TotalBESs PerfTotalCount, cesOverWlanUnit0Dsx1TotalDMs PerfTotalCount, cesOverWlanUnit0Dsx1TotalLCVs PerfTotalCount } cesOverWlanUnit0Dsx1TotalIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a cesOverWlanUnit0Dsx1LineIndex object instance." ::= { cesOverWlanUnit0Dsx1TotalEntry 1 } cesOverWlanUnit0Dsx1TotalESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 2 } cesOverWlanUnit0Dsx1TotalSESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 3 } cesOverWlanUnit0Dsx1TotalSEFSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 4 } cesOverWlanUnit0Dsx1TotalUASs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 5 } cesOverWlanUnit0Dsx1TotalCSSs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 6 } cesOverWlanUnit0Dsx1TotalPCVs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 7 } cesOverWlanUnit0Dsx1TotalLESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 8 } cesOverWlanUnit0Dsx1TotalBESs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 9 } cesOverWlanUnit0Dsx1TotalDMs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 10 } cesOverWlanUnit0Dsx1TotalLCVs OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations (LCVs) encountered by a DS1 interface in the current 15-minute interval. Invalid 15-minute intervals count as 0." ::= { cesOverWlanUnit0Dsx1TotalEntry 11 } cesOverWlanUnit0Ds1TrapsPrefix OBJECT IDENTIFIER ::= { cesOverWlanUnit0Ds1 15 } -- DS1 TRAPS cesOverWlanUnit0Ds1Traps OBJECT IDENTIFIER ::= { cesOverWlanUnit0Ds1TrapsPrefix 0 } cesOverWlanUnit0Dsx1LineStatusChange NOTIFICATION-TYPE OBJECTS { cesOverWlanUnit0Dsx1LineStatus, cesOverWlanUnit0Dsx1LineStatusLastChange} STATUS current DESCRIPTION "A cesOverWlanUnit0Dsx1LineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an Network Management Station (NMS) to trigger polls. When the line status change results from a higher-level line status change (i.e., DS3), then no traps for the DS1 are sent." ::= { cesOverWlanUnit0Ds1Traps 1 } cesOverWlanUnit0MIBConformance OBJECT IDENTIFIER ::= { cesOverWlanUnit0Ds1 16 } cesOverWlanUnit0Group OBJECT-GROUP OBJECTS { cesOverWlanUnit0Dsx1LineIndex, cesOverWlanUnit0Dsx1IfIndex, cesOverWlanUnit0Dsx1TimeElapsed, cesOverWlanUnit0Dsx1ValidIntervals, cesOverWlanUnit0Dsx1LineType, cesOverWlanUnit0Dsx1LineCoding, cesOverWlanUnit0Dsx1SendCode, cesOverWlanUnit0Dsx1CircuitIdentifier, cesOverWlanUnit0Dsx1LoopbackConfig, cesOverWlanUnit0Dsx1LineStatus, cesOverWlanUnit0Dsx1SignalMode, cesOverWlanUnit0Dsx1TransmitClockSource, cesOverWlanUnit0Dsx1Fdl, cesOverWlanUnit0Dsx1InvalidIntervals, cesOverWlanUnit0Dsx1LineLength, cesOverWlanUnit0Dsx1LineStatusLastChange, cesOverWlanUnit0Dsx1LineStatusChangeTrapEnable, cesOverWlanUnit0Dsx1LoopbackStatus, cesOverWlanUnit0Dsx1Ds1ChannelNumber, cesOverWlanUnit0Dsx1Channelization, cesOverWlanUnit0Dsx1LineMode, cesOverWlanUnit0Dsx1LineBuildOut, cesOverWlanUnit0Dsx1LineImpedance, cesOverWlanUnit0Dsx1CurrentIndex, cesOverWlanUnit0Dsx1CurrentESs, cesOverWlanUnit0Dsx1CurrentSESs, cesOverWlanUnit0Dsx1CurrentSEFSs, cesOverWlanUnit0Dsx1CurrentUASs, cesOverWlanUnit0Dsx1CurrentCSSs, cesOverWlanUnit0Dsx1CurrentPCVs, cesOverWlanUnit0Dsx1CurrentLESs, cesOverWlanUnit0Dsx1CurrentBESs, cesOverWlanUnit0Dsx1CurrentDMs, cesOverWlanUnit0Dsx1CurrentLCVs, cesOverWlanUnit0Dsx1IntervalIndex, cesOverWlanUnit0Dsx1IntervalNumber, cesOverWlanUnit0Dsx1IntervalESs, cesOverWlanUnit0Dsx1IntervalSESs, cesOverWlanUnit0Dsx1IntervalSEFSs, cesOverWlanUnit0Dsx1IntervalUASs, cesOverWlanUnit0Dsx1IntervalCSSs, cesOverWlanUnit0Dsx1IntervalPCVs, cesOverWlanUnit0Dsx1IntervalLESs, cesOverWlanUnit0Dsx1IntervalBESs, cesOverWlanUnit0Dsx1IntervalDMs, cesOverWlanUnit0Dsx1IntervalLCVs, cesOverWlanUnit0Dsx1IntervalValidData, cesOverWlanUnit0Dsx1TotalIndex, cesOverWlanUnit0Dsx1TotalESs, cesOverWlanUnit0Dsx1TotalSESs, cesOverWlanUnit0Dsx1TotalSEFSs, cesOverWlanUnit0Dsx1TotalUASs, cesOverWlanUnit0Dsx1TotalCSSs, cesOverWlanUnit0Dsx1TotalPCVs, cesOverWlanUnit0Dsx1TotalLESs, cesOverWlanUnit0Dsx1TotalBESs, cesOverWlanUnit0Dsx1TotalDMs, cesOverWlanUnit0Dsx1TotalLCVs } STATUS current DESCRIPTION "" ::= { cesOverWlanUnit0MIBConformance 2 } cesOverWlanUnit0Notifications NOTIFICATION-GROUP NOTIFICATIONS { cesOverWlanUnit0Dsx1LineStatusChange } STATUS current DESCRIPTION "" ::= { cesOverWlanUnit0MIBConformance 1 } END