-- ================================================================= -- Copyright (C) 2023 by HUAWEI TECHNOLOGIES. All rights reserved -- -- Description: Network Quality Analyse MIB. -- Reference: -- Version: V3.10 -- History: -- V1.0 liyonggang 2006.6.7,publish -- V1.1 -- modified by liyonggang -- ================================================================= NQA-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress FROM RFC1155-SMI InterfaceIndexOrZero -- RFC2863 FROM IF-MIB hwDatacomm FROM HUAWEI-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, Integer32, Gauge32, Counter32, Unsigned32, OBJECT-TYPE,mib-2, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue, TimeStamp, RowStatus, TimeInterval, StorageType,MacAddress, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC2571 Dot1agCfmMepIdOrZero, Dot1agCfmMaintDomainName, Dot1agCfmMaintAssocName FROM IEEE802171-CFM-MIB EnabledStatus FROM P-BRIDGE-MIB VlanIdOrNone FROM Q-BRIDGE-MIB -- [RFC4363] HWDot1agCfmRelayActionFieldValue, HWDot1agCfmIngressActionFieldValue, HWDot1agCfmEgressActionFieldValue FROM HUAWEI-ETHOAM-MIB; nqa MODULE-IDENTITY LAST-UPDATED "202302061059Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "Modify description at 2023-02-06." REVISION "202302061059Z" DESCRIPTION "Modify description at 2023-01-09." REVISION "202301091459Z" DESCRIPTION "Modify description at 2022-10-12." REVISION "202210121459Z" DESCRIPTION "Modify description at 2022-08-28." REVISION "202208281919Z" DESCRIPTION "Modify description at 2022-06-16." REVISION "202206161919Z" DESCRIPTION "Modify description at 2022-06-08." REVISION "202206081919Z" DESCRIPTION "Modify description at 2022-06-06." REVISION "202206061919Z" DESCRIPTION "Modify description at 2022-05-18." REVISION "202205181919Z" DESCRIPTION "Modify description at 2022-05-11." REVISION "202205111919Z" DESCRIPTION "Modify description at 2022-05-04." REVISION "202205041919Z" DESCRIPTION "Modify description at 2020-11-04." REVISION "202011041919Z" DESCRIPTION "Add mib node nqaAdminParaFlexAlgoId at 2020-10-14." REVISION "202010141547Z" DESCRIPTION "Modify nqaAdminParaIcpifAdvFactor range at 2020-09-04." REVISION "202009041109Z" DESCRIPTION "Modify English low-level mistakes at 2020-08-03." REVISION "202008031109Z" DESCRIPTION "Modify mib node nqaAdminParaSrPolicyBindingSid at 2020-6-24." REVISION "202006240917Z" DESCRIPTION "Add mib table nqaLatestStatsTable at 2020-06-05." REVISION "202006051135Z" DESCRIPTION "Modify mib node nqaAdminParaSrPolicyBindingSid at 2020-4-22." REVISION "202004220917Z" DESCRIPTION "Add mib node nqaAdminParaDscp at 2020-1-26." REVISION "202001260917Z" DESCRIPTION "Modify mib node nqaAdminParaSrPolicyEndPointAddrType, nqaAdminParaSrPolicyBindingSid , nqaAdminParaSrPolicyEndPointIpAddress, nqaAdminParaSrPolicyEndPointColor at 2019-4-22." REVISION "201904221935Z" DESCRIPTION "Modify mib node nqaAdminParaSrPolicyEndPointAddrType at 2019-4-22." REVISION "201904221546Z" DESCRIPTION "Modify mib node nqaJitterLatestStatsMaxDelaySD at 2018-9-13." REVISION "201902251546Z" DESCRIPTION "Modify mib node and nqaAdminParaSrPolicyBindingSid at 2019-01-16." REVISION "201901161546Z" DESCRIPTION "Modify mib node and nqaAdminParaSrPolicyBindingSid at 2019-01-16." REVISION "201812261514Z" DESCRIPTION "Modify mib node nqaMultiPathResultsSrPolicyPathType and nqaMultiPathResultsSrPolicyProtocol at 2018-12-26." REVISION "201812071658Z" DESCRIPTION "Add mib node nqaAdminParaSrPolicyName, nqaAdminParaSrPolicyEndPointIpAddress, nqaAdminParaSrPolicyEndPointColor, nqaAdminParaSrPolicyBindingSid and mib table nqaMultiPathResultsTable, nqaMultiPathHistoryTable at 2018-12-7." REVISION "201809131151Z" DESCRIPTION "Add mib node nqaAdminParaLspReplyMode OBJECT-TYPE, specifiedTunnelPath at 2018-8-22." REVISION "201808221051Z" DESCRIPTION "Add mib node nqaAdminParaRmoteFecType, nqaAdminParaRmoteFecMask, nqaAdminParaRmoteFecIpAddress at 2018-7-30." REVISION "201807301548Z" DESCRIPTION "Add mib table nqaJitterLatestStatsTable at 2018-7-28." REVISION "201807281548Z" DESCRIPTION "Add mib node nqaResultsTestResultChangePackedNotification in nqaNotificationsGroup NOTIFICATIONS at 2017-11-15." REVISION "201711151548Z" DESCRIPTION "Modify description of mib node nqaAdminParaTable, nqaScheduleTable, nqaAdminParaExtTable, nqaUdpServerTable, nqaIcmpServerTable, nqaResultsTable, nqaJitterStatsTable, nqaReflectorTable at 2017-11-10." REVISION "201711101616Z" DESCRIPTION "Modify mib node nqaAdminParaEthPriorityStatus at 2017-06-19." REVISION "201706191029Z" DESCRIPTION "Add mib node nqaAdminParaEthPriorityStatus at 2017-06-14." REVISION "201706141609Z" DESCRIPTION "Add mib node nqaAdminParaFragment at 2017-03-27." REVISION "201702272132Z" DESCRIPTION "Add mib node nqaResultsDetail, nqaJitterStatsResultDetail at 2017-02-20." REVISION "201702202132Z" DESCRIPTION "Add mib node nqaAdminParaPathType at 2015-09-16." REVISION "201509161556Z" DESCRIPTION "Add mib node nqaAdminParaLspPathType at 2015-07-17." REVISION "201507171714Z" DESCRIPTION "Add description for mib node nqaAdminParaInterval at 2015-07-10." REVISION "201507101011Z" DESCRIPTION "Add mib node nqaAdminParaSoftwareBased,nqaRtpUdpServerSoftwareBased,nqaRtptestStatsMinDelaySD,nqaRtptestStatsMaxDelaySD,nqaRtptestStatsAvgDelaySD, nqaRtptestStatsMinJitterSD,nqaRtptestStatsMaxJitterSD,nqaRtptestStatsAvgJitterSD,nqaRtptestStatsLossRateSD,nqaRtptestStatsIPDVSD at 2015-03-19." REVISION "201503191711Z" DESCRIPTION "Add mib node nqaTestFlowDstMacModifierType,nqaTestFlowDstMacModifierMask,nqaTestFlowDstMacModifierCount,nqaTestFlowDstMacModifierStep,nqaTestFlowSrcMacModifierType, nqaTestFlowSrcMacModifierMask,nqaTestFlowSrcMacModifierCount,nqaTestFlowSrcMacModifierStep,nqaTestFlowDstIPModifierType,nqaTestFlowDstIPModifierMask, nqaTestFlowDstIPModifierCount,nqaTestFlowDstIPModifierStep,nqaTestFlowSrcIPModifierType,nqaTestFlowSrcIPModifierMask,nqaTestFlowSrcIPModifierCount, nqaTestFlowSrcIPModifierStep at 2015-01-19." REVISION "201501191411Z" DESCRIPTION "Modify mib by ping address poor." REVISION "201501141058Z" DESCRIPTION "HUAWEI service quality detect funcion." REVISION "201501141058Z" DESCRIPTION "Modify mib node nqaAdminParaLspTunnelType 2015-01-14." REVISION "201501081701Z" DESCRIPTION "Modify mib node nqaResultsIndex, nqaResultsHopIndex and nqaJitterStatsIndex at 2015-01-08." REVISION "201412191707Z" DESCRIPTION "Modify mib node nqaAdminParaLspAddressType, and add mib node nqaAdminParaLspIPv4VpnType at 2014-11-17." REVISION "201412121759Z" DESCRIPTION "Modify mib node nqaTestFlowBeginUdpDstPort,nqaTestFlowBeginUdpSrcPort,nqaEthernetServiceParaTestFlowId,nqaEthernetServiceParaPacketSizeValue, nqaEthernetServiceParaDisorderStatistics at 2014-12-12." REVISION "201412081345Z" DESCRIPTION "HUAWEI service quality detect funcion." REVISION "201411121345Z" DESCRIPTION "Add mib node nqaResultsTestResultChange at 2014-11-12." REVISION "201410301357Z" DESCRIPTION "Add some descriptions for mib node:nqaEthernetServiceStatsTestStep, nqaTestFlowDstIPAddrType,nqaTestFlowSrcIPAddrType,nqaTestFlowColorMode,nqaEthernetServiceStatsTestProcess,nqaEthernetServiceStatsTestStatus, nqaEthernetServiceStatsFlowResult,nqaEthernetServiceStatsTestMode,nqaEthernetServiceStatsTestPhase,nqaEthernetServiceStatsFlowFLRPrecision,nqaEthernetServiceStatsFlowAvailPrecision,nqaReflectorDiscardPriority 2014-10-30." REVISION "201410211114Z" DESCRIPTION "Modify mib node nqaAdminParaCeEthType , nqaAdminParaPeEthType 2014-10-21." REVISION "201409201357Z" DESCRIPTION "Add mib table nqaEthernetServiceParaTable, nqaEthernetServiceStatsTable, nqaTestFlowTable, mib node nqaReflectorEndTime, nqaReflectorExchangePort, nqaReflectorTestFlowId 2014-09-20." REVISION "201409091526Z" DESCRIPTION "Add mib node nqaAdminParaSourceMacAddress, nqaAdminParaCeEthType, nqaAdminParaPeEthType, nqaAdminParaDirectionon, nqaReflectorDirection 2014-09-09." REVISION "201406270930Z" DESCRIPTION "Add mib node nqaJitterStatsStartTime, nqaJitterStatsEndTime on 2014-06-27." REVISION "201406270930Z" DESCRIPTION "Add mib node nqaJitterStatsStartTime, nqaJitterStatsEndTime on 2014-06-27." REVISION "201405131606Z" DESCRIPTION "Modify mib node nqaAdminGeneralflowDiscardNonTest and its type, description etc. on 2014-05-13." REVISION "201404221545Z" DESCRIPTION "Add mib node nqaGeneralflowStatsCurrentRateCount, mib table nqaGeneralflowCurrentStatsTable, including mib node: nqaGeneralflowCurrentStatsRateIndex, nqaGeneralflowCurrentStatsThroughput and nqaGeneralflowCurrentStatsFrameLossRate on 2014-04-22." REVISION "201404191612Z" DESCRIPTION "Add mib node nqaAdminGeneralflowDiscardNonTest and nqaReflectorDiscardPriority on 2014-04-19." REVISION "201404171656Z" DESCRIPTION "Modify desdription of those mib nodes nqaJitterStatsTestFailed nqaJitterStatsTestCompleted nqaJitterStatsRTDThresholdNotification nqaJitterStatsOWDThresholdNotificationSD and nqaJitterStatsOWDThresholdNotificationDS at 2014-04-17." REVISION "201403132149Z" DESCRIPTION "Add mib node nqaGeneralflowStatsFrameRate and nqaAdminParaFrameRate, modify nqaGeneralflowStatsActualTestTime to nqaGeneralflowStatsRealTestTime on 2014-03-13." REVISION "201402241904Z" DESCRIPTION "Add mib node nqaGeneralflowStatsEstimatedTestTime and nqaGeneralflowStatsActualTestTime on 2014-02-24." REVISION "201402191653Z" DESCRIPTION "Modify processing(4) to running(4) of the nqaGeneralflowStatsCompletions node on 2014-02-19." REVISION "201402141630Z" DESCRIPTION "Modify desdription of those mib nodes nqaGeneralflowStatsStartTime nqaGeneralflowStatsEndTime nqaGeneralflowStatsTestTotalTime nqaGeneralflowStatsTestRemainingTime and nqaGeneralflowStatsTestTime on 2014-02-14." REVISION "201402080846Z" DESCRIPTION "Add mib nodes nqaGeneralflowStatsStartTime nqaGeneralflowStatsEndTime nqaGeneralflowStatsTestTotalTime nqaGeneralflowStatsTestRemainingTime and nqaGeneralflowStatsTestTime on 2014-02-08." REVISION "201401281109Z" DESCRIPTION "Add mib node nqaGeneralflowStatsFrameLossRatePrecision and nqaGeneralflowStatsFrameLossRatePrecisionValue on 2014-01-28." REVISION "201401131041Z" DESCRIPTION "Add value scope for nqaAdminParaFailRatioPrecision on 2014-01-13." REVISION "201401091830Z" DESCRIPTION "Modify SYNTAX of hwClockCesAcrDomianInfoDomain on 2014-01-09." REVISION "201312301008Z" DESCRIPTION "Modify value of nqaGeneralflowStatsCompletions on 2013-12-16." ::= { hwDatacomm 111 } -- -- Textual conventions -- NqaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Select test type" SYNTAX INTEGER { unknown(0), tcpConnect(1), udpEcho(2), httpAppl(3), ftpAppl(4), jitterAppl(5), icmpAppl(6), snmpAppl(7), traceRoute(8), lspPing(9), lspTraceRoute(10), dnsAppl(11), dhcpAppl(12), dlswAppl(13), pwe3Ping(14), pwe3Tracert(15), mPing(16), mTracert(17), macPing(18), macTunnelPing(19), lspJitter(20), pathMtu(21), icmpJitter(22), pathJitter(23), pppoe(24), vplsmPing(25), vplsmacPing(26), vplsmacTrace(27), vplsMTrace(28), gmacping(29), gmactrace(30), mactrace(31), vplspwping(32), vplspwtrace(33), rtptest(36), rtpsnoop(37), generalflow(38), ethernetService(39) } EnableValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean value." SYNTAX INTEGER { enable(1), disable(2) } NqaDistanceNodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Selection of destination addresses when MACPing is performed." SYNTAX INTEGER { macAddress(1), mepID(2) } HWLldpPortIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "LLDP interface ID sub type" SYNTAX INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } HWLldpPortId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID." SYNTAX OCTET STRING (SIZE (1..255)) NqaOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Paras for specified test." SYNTAX INTEGER { noOperation(1), httpGet(2), httpPost(3), ftpGet(4), ftpPut(5) } ProtocolType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean value." SYNTAX INTEGER { unknown(0), udp(1), tcp(2) } -- -- Node definitions -- nqaBase OBJECT IDENTIFIER ::= { nqa 1 } nqaVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The NQA version (for example, 1.1). It can be used for version management." ::= { nqaBase 1 } nqaEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the switch of enabling NQA client. (The value range: enable:1; disable:2. The default value is enable(1))" ::= { nqaBase 2 } nqaReset OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all the enabled test configurations. (The value range: enable:1; disable:2. The default value is disable(2))" ::= { nqaBase 3 } nqaTimeOfLastSetError OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last configuration error. (0 indicates that the configuration does not fail)." ::= { nqaBase 4 } nqaLastSetError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last configuration error. (0 indicates that the configuration does not fail)." ::= { nqaBase 5 } nqaNumOfCurrentCtrlEntry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of current configuration tests." ::= { nqaBase 6 } nqaMaxConcurrentRequests OBJECT-TYPE SYNTAX Unsigned32 UNITS "requests" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of concurrent active requests that are allowed within an agent implementation." ::= { nqaBase 7 } nqaMaxNumOfRequests OBJECT-TYPE SYNTAX Unsigned32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of requests that are allowed within an agent implementation. " ::= { nqaBase 8 } nqaJitterVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the version of jitter test. (The value range: old version:1, new version:2. The default value is old version(1))" ::= { nqaBase 9 } nqaSupportTestType OBJECT-TYPE SYNTAX BITS { icmp(0), tcp(1), udp(2), http(3), ftp(4), jitter(5), snmp(6), trace(7), lspPing(8), lspTrace(9), dns(10), dhcp(11), dlsw(12), pwe3Ping(13), pwe3Trace(14), mPing(15), mTrace(16), macPing(17), macTunnelPing(18), lspJitter(19), icmpJitter(20), pathJitter(21), pathMtu(22), pppoe(23), vplsmPing(24), vplsmacPing(25), vplsmacTrace(26), vplsMTrace(27), gmacping(28), gmactrace(29), mactrace(30), vplspwping(31), vplspwtrace(32), rtptest(36), rtpsnoop(37), generalflow(38), ethernetService(39) } MAX-ACCESS read-only STATUS current DESCRIPTION "Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type. The mappings between bits and tests are as follows: icmp(0), tcp(1), udp(2), http(3), ftp(4), jitter(5), snmp(6), trace(7), lspPing(8), lspTrace(9), dns(10), dhcp(11), dlsw(12), pwe3Ping(13), pwe3Trace(14), mPing(15), mTrace(16), macPing(17), macTunnelPing(18), lspJitter(19), icmpJitter(20), pathJitter(21), pathMtu(22), pppoe(23), vplsmPing(24), vplsmacPing(25), vplsmacTrace(26), vplsMTrace(27), gmacping(28), gmactrace(29), mactrace(30), vplspwping(31), vplspwtrace(32), rtptest(36), rtpsnoop(37), generalflow(38), ethernetService(39) The value #0x00 indicates don't support all testtypes." ::= { nqaBase 10} nqaSupportServerType OBJECT-TYPE SYNTAX BITS { tcpServer(0), udpServer(1), icmpServer(2), rtpudpServer(3), rtptcpServer(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type. tcpServer(0), udpServer(1), icmpServer(2), rtpudpServer(3), rtptcpServer(4) The value #0x00 indicates don't support all servertypes." ::= { nqaBase 11} nqaRtptestMaxConcurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of concurrent active rtptest requests that are allowed within an agent implementation." ::= { nqaBase 12 } nqaRtpsnoopMaxConcurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of concurrent active rtpsnoop requests that are allowed within an agent implementation." ::= { nqaBase 13 } nqaRtpudpMaxConcurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of concurrent active rtp-udp servers." ::= { nqaBase 14 } nqaRtptcpMaxConcurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of concurrent active rtp-tcp servers." ::= { nqaBase 15 } nqaCtrl OBJECT IDENTIFIER ::= { nqa 2 } nqaAdminCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaAdminCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of NQA monitoring definitions." ::= { nqaCtrl 1 } nqaAdminCtrlEntry OBJECT-TYPE SYNTAX NqaAdminCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaAdminCtrlTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaAdminCtrlTable 1 } NqaAdminCtrlEntry ::= SEQUENCE { nqaAdminCtrlOwnerIndex SnmpAdminString, nqaAdminCtrlTestName SnmpAdminString, nqaAdminCtrlTag DisplayString, nqaAdminCtrlType NqaType, nqaAdminCtrlFrequency Integer32, nqaAdminCtrlTimeOut Integer32, nqaAdminCtrlThreshold1 Integer32, nqaAdminCtrlThreshold2 Integer32, nqaAdminCtrlThreshold3 Integer32, nqaAdminCtrlStatus RowStatus, nqaAdminCtrlJitterThresholdSD Integer32, nqaAdminCtrlJitterThresholdDS Integer32 } nqaAdminCtrlOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'ownerindex'. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index." ::= { nqaAdminCtrlEntry 1 } nqaAdminCtrlTestName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a test. This is locally unique, within the scope of an nqaAdminCtrlOwnerIndex." ::= { nqaAdminCtrlEntry 2 } nqaAdminCtrlTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "A string which is the description of the test instance." ::= { nqaAdminCtrlEntry 3 } nqaAdminCtrlType OBJECT-TYPE SYNTAX NqaType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the test instance." ::= { nqaAdminCtrlEntry 4 } nqaAdminCtrlFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the interval when the test instance repeats." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 5 } nqaAdminCtrlTimeOut OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the duration to wait for the completion of test instance. The default value of DHCP-type and FTP-type test instance is 15s, The default value of PPPoE-type test instance is 30s, and that of other types is 3s." ::= { nqaAdminCtrlEntry 6 } nqaAdminCtrlThreshold1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the threshold of RTD (Round Trip Delay). If the RTT violates the threshold, the corresponding counter will increase. It applies to any type of test instance." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 7 } nqaAdminCtrlThreshold2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the threshold of OWD (One Way Delay) from source to destination. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 8 } nqaAdminCtrlThreshold3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the threshold of OWD (One Way Delay) from destination to source. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 9 } nqaAdminCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To set the value of this object can create or delete the specified test instance and the records belonging to it. Before deleting a test instance, the custom must make sure that the status of the test instance is inactive through nqaScheduleOperStatus. The value can be set to 'CreateAndGo (4)', 'Destroy (6)' and 'Active (1)'." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaAdminCtrlEntry 10 } nqaAdminCtrlJitterThresholdSD OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the threshold of jitter from source to destination. If the jitter violates the threshold, the corresponding counter will increase. It applies only to jitter-type and icmpjitter-type test instances." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 11 } nqaAdminCtrlJitterThresholdDS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the threshold of jitter from destination to source. If the jitter violates the threshold, the corresponding counter will increase. It applies only to jitter-type and icmpjitter-type test instances." DEFVAL { 0 } ::= { nqaAdminCtrlEntry 12 } nqaAdminParaTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaAdminParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: nqaAdminParaTable describes how to configure parameters of a test instance. Creation restrictions: None Modification restrictions: None Deletion restrictions: None Access restrictions: None " ::= { nqaCtrl 2 } nqaAdminParaEntry OBJECT-TYPE SYNTAX NqaAdminParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "set parameter in the nqaAdminParaTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaAdminParaTable 1 } NqaAdminParaEntry ::= SEQUENCE { nqaAdminParaTargetAddressType InetAddressType, nqaAdminParaTargetAddress InetAddress, nqaAdminParaTargetPort InetPortNumber, nqaAdminParaSourceAddressType InetAddressType, nqaAdminParaSourceAddress InetAddress, nqaAdminParaSourcePort InetPortNumber, nqaAdminParaMaxTtl Unsigned32, nqaAdminParaInitialTtl Unsigned32, nqaAdminParaStorageType StorageType, nqaAdminParaMaxFailures Unsigned32, nqaAdminParaDontFragment TruthValue, nqaAdminParaDataSize Unsigned32, nqaAdminParaDataFill OCTET STRING, nqaAdminParaIfIndex InterfaceIndexOrZero, nqaAdminParaByPassRouteTable TruthValue, nqaAdminParaMiscOptions SnmpAdminString, nqaAdminParaProbeCount Unsigned32, nqaAdminParaTrapGeneration BITS, nqaAdminParaTrapProbeFailureFilter Unsigned32, nqaAdminParaTrapTestFailureFilter Unsigned32, nqaAdminParaDSField Integer32, nqaAdminParaDnsServerAddressType InetAddressType, nqaAdminParaDnsServerAddress InetAddress, nqaAdminParaOperation NqaOperation, nqaAdminParaHttpVersion DisplayString, nqaAdminParaHttpOperationString DisplayString, nqaAdminParaTestFailurePercent Unsigned32, nqaAdminParaFtpUserName DisplayString, nqaAdminParaFtpPassword DisplayString, nqaAdminParaFtpFilePath DisplayString, nqaAdminParaFtpFileSize Integer32, nqaAdminParaInterval Integer32, nqaAdminParaNumPackets Integer32, nqaAdminParaVrfName DisplayString, nqaAdminParaLspAddressType INTEGER, nqaAdminParaLspAddressMask Integer32, nqaAdminParaLspIpAddress InetAddress, nqaAdminParaLspPWE3VcId Unsigned32, nqaAdminParaLspPWE3Type INTEGER, nqaAdminParaLspPWE3Option INTEGER, nqaAdminParaLspPWE3RemoteVcId Unsigned32, nqaAdminParaLspPWE3RemoteAddress InetAddress, nqaAdminParaLspExp Unsigned32, nqaAdminParaLspReplyMode INTEGER, nqaAdminParaResultRowMax Integer32, nqaAdminParaHistoryRowMax Integer32, nqaAdminParaCreateHopsEntries EnableValue, nqaAdminParaLspVCType INTEGER, nqaAdminParaMTraceLastHopAddress InetAddress, nqaAdminParaMTraceSourceAddress InetAddress, nqaAdminParaMTraceGroupAddress InetAddress, nqaAdminParaMTraceMaxTtl Unsigned32, nqaAdminParaMTraceSendMode INTEGER, nqaAdminParaMTraceResponseTtl Unsigned32, nqaAdminParaMTraceResponseAddressType InetAddressType, nqaAdminParaMTraceResponseAddress InetAddress, nqaAdminParaDistanceNodeType NqaDistanceNodeType, nqaAdminParaMacAddress MacAddress, nqaAdminParaRMepID Dot1agCfmMepIdOrZero, nqaAdminParaMDName OCTET STRING, nqaAdminParaMAName OCTET STRING, nqaAdminParaMacTunnelName OCTET STRING, nqaAdminParaPathMtuStep Integer32, nqaAdminParaPathMtuDiscoveryPathMtuMax Integer32, nqaAdminParaIcmpJitterMode INTEGER, nqaAdminParaCodecType INTEGER, nqaAdminParaIcpifAdvFactor Integer32, nqaAdminParaFtpMode INTEGER, nqaAdminParaHardwareBased EnabledStatus, nqaAdminParaPppoeUserName OCTET STRING, nqaAdminParaPppoePassword OCTET STRING, nqaAdminParaPppoeVlanIf Integer32, nqaAdminParaPppoeAuthenticationMode INTEGER, nqaAdminParaPppoeRedialUpTimes Integer32, nqaAdminParaPppoeInterval Integer32, nqaAdminParaVsiName OCTET STRING, nqaAdminParaVlanId VlanIdOrNone, nqaAdminParaLspTunnelType INTEGER, nqaAdminParaLspNextHopAddress InetAddress, nqaAdminParaLspVersion INTEGER, nqaAdminParaRemoteAddressType InetAddressType, nqaAdminParaRemoteAddress InetAddress, nqaAdminParaTimeUnit INTEGER, nqaAdminParaProbeRate Unsigned32, nqaAdminParaLifeTime Unsigned32, nqaAdminParaProtocolType ProtocolType, nqaAdminParaSampleFrequency Unsigned32, nqaAdminParaPacketSize Unsigned32, nqaAdminParaPacketInterval Unsigned32, nqaAdminParaNextHopAddressType InetAddressType, nqaAdminParaNextHopAddress InetAddress, nqaAdminParaForwardingSimulationInboundIfIndex InterfaceIndexOrZero, nqaAdminParaMeasure INTEGER, nqaAdminParaEthPriority Unsigned32, nqaAdminParaMinRate Unsigned32, nqaAdminParaMaxRate Unsigned32, nqaAdminParaCevid Unsigned32, nqaAdminParaPevid Unsigned32, nqaAdminParaPrecision Unsigned32, nqaAdminParaSnmpCommunityRead OCTET STRING, nqaAdminParaDatasizeList OCTET STRING, nqaAdminParaFailRatioPrecision Unsigned32, nqaAdminParaFailRatioValue Unsigned32, nqaAdminGeneralflowTestBehavior Unsigned32, nqaAdminParaFrameRate INTEGER, nqaAdminGeneralflowDiscardNonTestPriority Unsigned32, nqaAdminParaSourceMacAddress MacAddress, nqaAdminParaCeEthType SnmpAdminString, nqaAdminParaPeEthType SnmpAdminString, nqaAdminParaDirection Unsigned32, nqaAdminParaLspVpnFrrPathType INTEGER, nqaAdminParaSoftwareBased EnabledStatus, nqaAdminParaLspPathType INTEGER, nqaAdminParaPathType INTEGER, nqaAdminParaFragment TruthValue, nqaAdminParaEthPriorityStatus EnabledStatus, nqaAdminParaRmoteFecType INTEGER, nqaAdminParaRmoteFecMask Integer32, nqaAdminParaRmoteFecIpAddress InetAddress, nqaAdminParaSrPolicyName OCTET STRING, nqaAdminParaSrPolicyEndPointAddrType InetAddressType, nqaAdminParaSrPolicyEndPointIpAddress InetAddress, nqaAdminParaSrPolicyEndPointColor Unsigned32, nqaAdminParaSrPolicyBindingSid Unsigned32, nqaAdminParaDscp TruthValue, nqaAdminParaFlexAlgoId Unsigned32 } nqaAdminParaTargetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address type of destination." DEFVAL { unknown } ::= { nqaAdminParaEntry 1 } nqaAdminParaTargetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address of destination." ::= { nqaAdminParaEntry 2 } nqaAdminParaTargetPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the port number of destination." ::= { nqaAdminParaEntry 3 } nqaAdminParaSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address type of source." DEFVAL { unknown } ::= { nqaAdminParaEntry 4 } nqaAdminParaSourceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address of source." ::= { nqaAdminParaEntry 5 } nqaAdminParaSourcePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the port number of source." ::= { nqaAdminParaEntry 6 } nqaAdminParaMaxTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "time-to-live value" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe." ::= { nqaAdminParaEntry 7 } nqaAdminParaInitialTtl OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the initial value of TTL." DEFVAL { 1 } ::= { nqaAdminParaEntry 8 } nqaAdminParaStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { nqaAdminParaEntry 9 } nqaAdminParaMaxFailures OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "timeouts" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of 255 (maximum hop count/possible TTL value) indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled." DEFVAL { 5 } ::= { nqaAdminParaEntry 10 } nqaAdminParaDontFragment OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a manual PATH MTU test." DEFVAL { false } ::= { nqaAdminParaEntry 11 } nqaAdminParaDataSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "octets" MAX-ACCESS read-write STATUS current DESCRIPTION "The size of data field in packet." DEFVAL { 0 } ::= { nqaAdminParaEntry 12 } nqaAdminParaDataFill OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminParaDataSize." DEFVAL { '00'H } ::= { nqaAdminParaEntry 13 } nqaAdminParaIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Specified the source interface or tunnel, from which probes of the test instance are sent. The value zero implies that the object is disabled." DEFVAL { 0 } ::= { nqaAdminParaEntry 14 } nqaAdminParaByPassRouteTable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the ping/traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed)." DEFVAL { false } ::= { nqaAdminParaEntry 15 } nqaAdminParaMiscOptions OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Enables an application to specify implementation dependent options." DEFVAL { ''H } ::= { nqaAdminParaEntry 16 } nqaAdminParaProbeCount OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "probes" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of packets sent by the test instance, or times of probe repeated, in which may send several packets. In the first case, the range is 1 to 65535 for IAS and 1 to 15 for other products. The second case applies to jitter-type test instances." ::= { nqaAdminParaEntry 17 } nqaAdminParaTrapGeneration OBJECT-TYPE SYNTAX BITS { probeFailure(0), testFailure(1), testCompletion(2), overRtdThreshold(3), overOwdThresholdSd(4), overOwdThresholdDs(5), overJitterThresholdSd(6), overJitterThresholdDs(7), testResultChange(8), resultChangePacked(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a PathChange notification when the current path varies from a previously determined path. - testFailure(1) - Generate a TestFailed notification when the full path to a target cannot be determined. - testCompletion(2) - Generate a TestCompleted notification when the path to a target has been determined. - overRtdThreshold(3) - Generate an Overthreshold of RTD notification when the statistic results exceed threshold. - overOwdThresholdSd(4) - Generate an Overthreshold of OWD-SD notification when the statistic results exceed threshold. - overOwdThresholdDs(5) - Generate an Overthreshold of OWD-DS notification when the statistic results exceed threshold. - overJitterThresholdSd(6) - Generate an Overthreshold of Jitter-SD notification when the statistic results exceed threshold. - overJitterThresholdDs(7) - Generate an Overthreshold of Jitter-DS notification when the statistic results exceed threshold. - testResultChange(8) - Generate a TestResultChange notification when test result is changed. - resultChangePacked(9) - Generate a packed trap when test result is changed. No more than two traps will be sent in one second and each trap contains at most ten records. The value #0x00 indicates disable all notifications." ::= { nqaAdminParaEntry 18 } nqaAdminParaTrapProbeFailureFilter OBJECT-TYPE SYNTAX Unsigned32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates the threshold indicated by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This object is used together with nqaAdminParaTrapGeneration." DEFVAL { 1 } ::= { nqaAdminParaEntry 19 } nqaAdminParaTrapTestFailureFilter OBJECT-TYPE SYNTAX Unsigned32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold indicated by nqaAdminParaTrapTestFailureFilter, a notification will be created. There are usually several probes in each test. This object is used together with nqaAdminParaTrapGeneration." DEFVAL { 1 } ::= { nqaAdminParaEntry 20 } nqaAdminParaDSField OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv6 header." DEFVAL { 0 } ::= { nqaAdminParaEntry 21 } nqaAdminParaDnsServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address type of DNS server." DEFVAL { unknown } ::= { nqaAdminParaEntry 22 } nqaAdminParaDnsServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address of DNS server." ::= { nqaAdminParaEntry 23 } nqaAdminParaOperation OBJECT-TYPE SYNTAX NqaOperation MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The operations of HTTP-type test instance include get and post." DEFVAL { noOperation } ::= { nqaAdminParaEntry 24 } nqaAdminParaHttpVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the version of HTTP." ::= { nqaAdminParaEntry 25 } nqaAdminParaHttpOperationString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string that specifies the HTTP operation which will be sent to the HTTP server." ::= { nqaAdminParaEntry 26 } nqaAdminParaTestFailurePercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the scale over which the test will be regarded as failed." DEFVAL { 100 } ::= { nqaAdminParaEntry 27 } nqaAdminParaFtpUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the user name of the FTP server." ::= { nqaAdminParaEntry 28 } nqaAdminParaFtpPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the password of the user of the FTP server." ::= { nqaAdminParaEntry 29 } nqaAdminParaFtpFilePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the full name of the file which will be transmitted by the FTP-type test instance." ::= { nqaAdminParaEntry 30 } nqaAdminParaFtpFileSize OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the size that the file will be transmitted by the FTP-type test instance. It may be part of the file." ::= { nqaAdminParaEntry 31 } nqaAdminParaInterval OBJECT-TYPE SYNTAX Integer32 (0..60000) UNITS "millseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the interval between two consecutive probe packets. If the test type is JITTER, ICMP JITTER or GENERALFLOW, the interval is restored to the default value when the value is set to 0." ::= { nqaAdminParaEntry 32 } nqaAdminParaNumPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only applies to jitter-type test instance." DEFVAL { 20 } ::= { nqaAdminParaEntry 33 } nqaAdminParaVrfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the VRF name." ::= { nqaAdminParaEntry 34 } nqaAdminParaLspAddressType OBJECT-TYPE SYNTAX INTEGER { ipv4(1), te(3), ipv4vpn(6), srte(8), srbe(9), bgp(12), srtepolicy(13), ring(100) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address type of LSP. The object applies to lspping, lsptrace and lspjitter type test instance." ::= { nqaAdminParaEntry 35 } nqaAdminParaLspAddressMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address mask of LSP. The object applies to lspping, lsptrace and lspjitter type test instance." ::= { nqaAdminParaEntry 36 } nqaAdminParaLspIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address filled in the ip header, must be a 127/8 address." ::= { nqaAdminParaEntry 37 } nqaAdminParaLspPWE3VcId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The local Pseudo wire ID in PWE3 Ping test" ::= { nqaAdminParaEntry 38 } nqaAdminParaLspPWE3Type OBJECT-TYPE SYNTAX INTEGER { fr(1), atmAal5Sdu(2), atmCellTransport(3), vlan(4), ethernet(5), hdlc(6), ppp(7), atmNto1Vcc(9), atmNto1Vpc(10), ipLayer2(11), atm1to1Vcc(12), atm1to1Vpc(13), cep(16), satopE1(17), satopT1(18), satopE3(19), cesopsnBasic(21), ipInterworking(64) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation type of Pseudo wire ID in the PWE3 Ping test" ::= { nqaAdminParaEntry 39 } nqaAdminParaLspPWE3Option OBJECT-TYPE SYNTAX INTEGER { labelAlert(1), controlWord(2), normal(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The label type of PWE3 Ping and PWE3 Tracert test." ::= { nqaAdminParaEntry 40 } nqaAdminParaLspPWE3RemoteVcId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The remote Pseudo wire ID in PWE Ping test." ::= { nqaAdminParaEntry 41 } nqaAdminParaLspPWE3RemoteAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The remote IP address in PWE3 Ping test." ::= { nqaAdminParaEntry 42 } nqaAdminParaLspExp OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The 3bit EXP field of the MPLS echo packet label." DEFVAL { 0 } ::= { nqaAdminParaEntry 43 } nqaAdminParaLspReplyMode OBJECT-TYPE SYNTAX INTEGER { noReply(1), udp(2), udpRouterAlert(3), levelControlChannel(4), udpviaVPLS(5), specifiedTunnelPath(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "ReplyMode Value Meaning ***** ******* 1 Do not reply 2 Reply via an IPv4/IPv6 UDP packet 3 Reply via an IPv4/IPv6 UDP packet with Router Alert 4 Reply via application level control channel 5 Reply via a VPLS IPv4 UDP packet 6 Reply via a SR-MPLS TE tunnel" DEFVAL { udp } ::= { nqaAdminParaEntry 44 } nqaAdminParaResultRowMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of result records." DEFVAL { 5 } ::= { nqaAdminParaEntry 45 } nqaAdminParaHistoryRowMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of history records." DEFVAL { 50 } ::= { nqaAdminParaEntry 46 } nqaAdminParaCreateHopsEntries OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable (1), the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance." DEFVAL { disable } ::= { nqaAdminParaEntry 47 } nqaAdminParaLspVCType OBJECT-TYPE SYNTAX INTEGER { ldp(1), bgp(2), bgpad(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of protocol which establishes PW in the pwe3tracert test" ::= { nqaAdminParaEntry 48 } nqaAdminParaMTraceLastHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The last hop router's IP address in Mtrace test." ::= { nqaAdminParaEntry 49 } nqaAdminParaMTraceSourceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the multicast source for the path being traced in Mtrace test." ::= { nqaAdminParaEntry 50 } nqaAdminParaMTraceGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The group address to be traced in Mtrace test, or zero if no group-specific information is desired." ::= { nqaAdminParaEntry 51 } nqaAdminParaMTraceMaxTtl OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of hops that the requester wants to trace in Mtrace test." DEFVAL { 255 } ::= { nqaAdminParaEntry 52 } nqaAdminParaMTraceSendMode OBJECT-TYPE SYNTAX INTEGER { multicastTree(1), allRouter(2), destination (3), lastHop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sending mode of the Query pamessage in Mtrace test." DEFVAL { multicastTree } ::= { nqaAdminParaEntry 53 } nqaAdminParaMTraceResponseTtl OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address." DEFVAL { 64 } ::= { nqaAdminParaEntry 54 } nqaAdminParaMTraceResponseAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Mtrace response address type" DEFVAL { unknown } ::= { nqaAdminParaEntry 55 } nqaAdminParaMTraceResponseAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a multicast address" ::= { nqaAdminParaEntry 56 } nqaAdminParaDistanceNodeType OBJECT-TYPE SYNTAX NqaDistanceNodeType MAX-ACCESS read-write STATUS current DESCRIPTION "The destination of MAC ping(mac address or rmepid)." ::= { nqaAdminParaEntry 57 } nqaAdminParaMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Mac address of the destination of MAC PING." ::= { nqaAdminParaEntry 58 } nqaAdminParaRMepID OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Rmepid of the destination of MAC PING." ::= { nqaAdminParaEntry 59 } nqaAdminParaMDName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..43)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the MD name in which the MAC Ping operated." ::= { nqaAdminParaEntry 60 } nqaAdminParaMAName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..45)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the MA name in which the MAC Ping operated." ::= { nqaAdminParaEntry 61 } nqaAdminParaMacTunnelName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the MAC Tunnel name in which the MAC Ping operated." ::= { nqaAdminParaEntry 62 } nqaAdminParaPathMtuStep OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the step of the path MTU test. If the last response was received successful,the next packet's length will add the step." ::= { nqaAdminParaEntry 63 } nqaAdminParaPathMtuDiscoveryPathMtuMax OBJECT-TYPE SYNTAX Integer32 (48..9198) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the max value of the discovery field in the path MTU test." ::= { nqaAdminParaEntry 64 } nqaAdminParaIcmpJitterMode OBJECT-TYPE SYNTAX INTEGER { icmpTimestamp(1), icmpEcho(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the type of ICMP packets to be sent in ICMP jitter and path jitter test. The value can be icmpTimestamp(1) or icmpEcho(2)." ::= { nqaAdminParaEntry 65 } nqaAdminParaCodecType OBJECT-TYPE SYNTAX INTEGER { notDefined(1), -- no codec type is defined or codec is unknown g711Alaw(2), -- uses G.711 A-Law g711Ulaw(3), -- uses G.711 muHmm-Law g729A(4) -- uses G.729A } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe." DEFVAL { notDefined } ::= { nqaAdminParaEntry 66 } nqaAdminParaIcpifAdvFactor OBJECT-TYPE SYNTAX Integer32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |***************************************************|*******| | Service |factor | |***************************************************|*******| | conventional wire-line | 0 | |***************************************************|*******| | mobility within Building | 5 | |***************************************************|*******| | mobility within geographical area | 10 | |***************************************************|*******| | access to hard-to-reach location | 20 | |***************************************************|*******| " DEFVAL {0} ::= { nqaAdminParaEntry 67 } nqaAdminParaFtpMode OBJECT-TYPE SYNTAX INTEGER { active(1), -- active mode is defined in ftp test passive(2) -- passive mode is defined in ftp test } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe." DEFVAL { active } ::= { nqaAdminParaEntry 68 } nqaAdminParaHardwareBased OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2))" ::= { nqaAdminParaEntry 69 } nqaAdminParaPppoeUserName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the probe uses PPPoE encapsulation. This parameter accepts the characters in sight only." ::= { nqaAdminParaEntry 70 } nqaAdminParaPppoePassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in sight only." ::= { nqaAdminParaEntry 71 } nqaAdminParaPppoeVlanIf OBJECT-TYPE SYNTAX Integer32(0..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp, udp, ftp, dns, http probes, this parameter indicates that the probe uses PPPoE encapsulation." ::= { nqaAdminParaEntry 72 } nqaAdminParaPppoeAuthenticationMode OBJECT-TYPE SYNTAX INTEGER { chap(1), pap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe." ::= { nqaAdminParaEntry 73 } nqaAdminParaPppoeRedialUpTimes OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe." DEFVAL { 0 } ::= { nqaAdminParaEntry 74 } nqaAdminParaPppoeInterval OBJECT-TYPE SYNTAX Integer32(1..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe." DEFVAL { 60 } ::= { nqaAdminParaEntry 75 } nqaAdminParaVsiName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the name of the VSI(Virtual Switch Instance)" ::= { nqaAdminParaEntry 76 } nqaAdminParaVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the Vlan ID" ::= { nqaAdminParaEntry 77 } nqaAdminParaLspTunnelType OBJECT-TYPE SYNTAX INTEGER { main(0), -- ping/trace the main lsp tunnel hotstandby(1), -- ping/trace the hot-standby lsp tunnel primary(2) -- ping/trace the primary lsp tunnel } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate ping/trace which lsp tunnel." DEFVAL { main } ::= { nqaAdminParaEntry 78 } nqaAdminParaLspNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address of nexthop." ::= { nqaAdminParaEntry 79 } nqaAdminParaLspVersion OBJECT-TYPE SYNTAX INTEGER { draft6(1), rfc4379(2), ptnmode(3), compatiblemode(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode." DEFVAL { draft6 } ::= { nqaAdminParaEntry 80 } nqaAdminParaRemoteAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address type of remote." DEFVAL { unknown } ::= { nqaAdminParaEntry 81 } nqaAdminParaRemoteAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address of remote." ::= { nqaAdminParaEntry 82 } nqaAdminParaTimeUnit OBJECT-TYPE SYNTAX INTEGER { us(1), -- The unit of the timestamp is us ms(2) -- The unit of the timestamp is ms } MAX-ACCESS read-write STATUS current DESCRIPTION "The unit of the timestamp, ms or us." ::= { nqaAdminParaEntry 83 } nqaAdminParaProbeRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate of sending message, bps." ::= { nqaAdminParaEntry 84 } nqaAdminParaLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The life time of test-case, s." ::= { nqaAdminParaEntry 85 } nqaAdminParaProtocolType OBJECT-TYPE SYNTAX ProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown(0), which means unspecified or unused." ::= { nqaAdminParaEntry 86 } nqaAdminParaSampleFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency of rtpsnoop test, khz." ::= { nqaAdminParaEntry 87 } nqaAdminParaPacketSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The packet size of message, byte." ::= { nqaAdminParaEntry 88 } nqaAdminParaPacketInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of sending message, ms." ::= { nqaAdminParaEntry 89 } nqaAdminParaNextHopAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address type of nexthop." DEFVAL { unknown } ::= { nqaAdminParaEntry 90 } nqaAdminParaNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address of nexthop." ::= { nqaAdminParaEntry 91 } nqaAdminParaForwardingSimulationInboundIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the inbound interface to simulate product forwarding." DEFVAL { 0 } ::= { nqaAdminParaEntry 92 } nqaAdminParaMeasure OBJECT-TYPE SYNTAX INTEGER { unknown(0), delay(1), loss(2), throughput(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the test mode for generalflow test." ::= { nqaAdminParaEntry 93 } nqaAdminParaEthPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario." ::= { nqaAdminParaEntry 94 } nqaAdminParaMinRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the minimum transmitting rate, in Kbps." ::= { nqaAdminParaEntry 95 } nqaAdminParaMaxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the maximum transmitting rate, in Kbps." ::= { nqaAdminParaEntry 96 } nqaAdminParaCevid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario. " ::= { nqaAdminParaEntry 97 } nqaAdminParaPevid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario." ::= { nqaAdminParaEntry 98 } nqaAdminParaPrecision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the throughput precision." ::= { nqaAdminParaEntry 99 } nqaAdminParaSnmpCommunityRead OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0." ::= { nqaAdminParaEntry 100 } nqaAdminParaDatasizeList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'." ::= { nqaAdminParaEntry 101 } nqaAdminParaFailRatioPrecision OBJECT-TYPE SYNTAX Unsigned32(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the precision of the threshold for the packet loss ratio. 0 indicates in 10e-4. 1 indicates in 10e-9." ::= { nqaAdminParaEntry 102 } nqaAdminParaFailRatioValue OBJECT-TYPE SYNTAX Unsigned32(0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for the packet loss ratio.The default value is 0." ::= { nqaAdminParaEntry 103 } nqaAdminGeneralflowTestBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the action performed on the non-test frames by the initiator. 0: Non-test frames will be discarded, and test frames will be forwarded. 1: Both non-test frames and test frames will be forwarded." DEFVAL { 0 } ::= { nqaAdminParaEntry 104 } nqaAdminParaFrameRate OBJECT-TYPE SYNTAX INTEGER { l1(1), l2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates an Ethernet frame rate. 1: utilized line rate (L1 rate). 2: information rate (L2 rate)." ::= { nqaAdminParaEntry 105 } nqaAdminGeneralflowDiscardNonTestPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario. The value can range from 0 to 7 if this node was configured, the value will be 0xffffffff if this node was not configured. " ::= { nqaAdminParaEntry 106 } nqaAdminParaSourceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Mac address of the source point." ::= { nqaAdminParaEntry 107 } nqaAdminParaCeEthType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type of Ethernet encapsulation.Default is 0x8100." ::= { nqaAdminParaEntry 108 } nqaAdminParaPeEthType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100." ::= { nqaAdminParaEntry 109 } nqaAdminParaDirection OBJECT-TYPE SYNTAX Unsigned32(1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the test direction. 1 indicates inbound. Send packets in manner of simulate product forwarding. 2 indicates outbound. Send packets in manner of output." ::= { nqaAdminParaEntry 110 } nqaAdminParaLspVpnFrrPathType OBJECT-TYPE SYNTAX INTEGER { main(0), -- ping the main ipv4-vpn lsp backup(1) -- ping the backup ipv4-vpn lsp } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate ping which ipv4-vpn lsp." DEFVAL { main } ::= { nqaAdminParaEntry 111 } nqaAdminParaSoftwareBased OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the software-based test is enabled only when the test case type is rtptest. (The value range: enable:1;disable:2.The default value is disable(2))" ::= { nqaAdminParaEntry 112 } nqaAdminParaLspPathType OBJECT-TYPE SYNTAX INTEGER { main(1), -- ping vpls pw via working lsp bypass(2) -- ping vpls pw via bypass lsp } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate ping vpls pw via which lsp." DEFVAL { main } ::= { nqaAdminParaEntry 113 } nqaAdminParaPathType OBJECT-TYPE SYNTAX INTEGER { main(1), bypass(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To indicate ping request packet via which path." DEFVAL { main } ::= { nqaAdminParaEntry 114 } nqaAdminParaFragment OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables setting of Fragment (F) flag in the IP header for a probe." DEFVAL { false } ::= { nqaAdminParaEntry 115 } nqaAdminParaEthPriorityStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow. Options: 1. enabled(1) -indicates the priority of Ethernet functionality is enabled. 2. disabled(2) -indicates the priority of Ethernet functionality is disabled. Default: disabled(2)." ::= { nqaAdminParaEntry 116 } nqaAdminParaRmoteFecType OBJECT-TYPE SYNTAX INTEGER { null(0), ldp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the remote FEC type. The object applies to lspping and lsptrace type test instance." DEFVAL { null } ::= { nqaAdminParaEntry 117 } nqaAdminParaRmoteFecMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the address mask of remote FEC. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 118 } nqaAdminParaRmoteFecIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPV4 address of remote FEC. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 119 } nqaAdminParaSrPolicyName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Policy name of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 120 } nqaAdminParaSrPolicyEndPointAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address type of destination." DEFVAL { unknown } ::= { nqaAdminParaEntry 121} nqaAdminParaSrPolicyEndPointIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 122 } nqaAdminParaSrPolicyEndPointColor OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The color of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 123 } nqaAdminParaSrPolicyBindingSid OBJECT-TYPE SYNTAX Unsigned32(0 | 16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "The binding sid of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 124 } nqaAdminParaDscp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the DS field is defined as the DSCP in the IP packet." DEFVAL { false } ::= { nqaAdminParaEntry 125 } nqaAdminParaFlexAlgoId OBJECT-TYPE SYNTAX Unsigned32(0 | 128..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The flexible algorithm ID. The object applies to lspping and lsptrace type test instance." ::= { nqaAdminParaEntry 126 } nqaAdminParaExtTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaAdminParaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: Objects in this table are used in pairs. In each pair, the first object is read-only. After the test instance type is specified, the system automatically fills the character string. Its content is the description of the second object, so that the user can learn the description and value range of the second object. The second object is a configurable NQA parameter. Test instances have different descriptions and values. After the test instance type is specified, the user can obtain the information from the first object. The values of the first 15 pairs of objects in this table are numbers, and those of the last 10 pairs of objects are character strings. Creation restrictions: None Modification restrictions: None Deletion restrictions: None Access restrictions: None" ::= { nqaCtrl 5 } nqaAdminParaExtEntry OBJECT-TYPE SYNTAX NqaAdminParaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set parameter in the nqaAdminParaExtTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaAdminParaExtTable 1 } NqaAdminParaExtEntry ::= SEQUENCE { nqaAdminExtPara1 OCTET STRING, nqaAdminExtPara2 Integer32, nqaAdminExtPara3 OCTET STRING, nqaAdminExtPara4 Integer32, nqaAdminExtPara5 OCTET STRING, nqaAdminExtPara6 Integer32, nqaAdminExtPara7 OCTET STRING, nqaAdminExtPara8 Integer32, nqaAdminExtPara9 OCTET STRING, nqaAdminExtPara10 Integer32, nqaAdminExtPara11 OCTET STRING, nqaAdminExtPara12 Integer32, nqaAdminExtPara13 OCTET STRING, nqaAdminExtPara14 Integer32, nqaAdminExtPara15 OCTET STRING, nqaAdminExtPara16 Integer32, nqaAdminExtPara17 OCTET STRING, nqaAdminExtPara18 Integer32, nqaAdminExtPara19 OCTET STRING, nqaAdminExtPara20 Integer32, nqaAdminExtPara21 OCTET STRING, nqaAdminExtPara22 Integer32, nqaAdminExtPara23 OCTET STRING, nqaAdminExtPara24 Integer32, nqaAdminExtPara25 OCTET STRING, nqaAdminExtPara26 Integer32, nqaAdminExtPara27 OCTET STRING, nqaAdminExtPara28 Integer32, nqaAdminExtPara29 OCTET STRING, nqaAdminExtPara30 Integer32, nqaAdminExtPara31 OCTET STRING, nqaAdminExtPara32 OCTET STRING, nqaAdminExtPara33 OCTET STRING, nqaAdminExtPara34 OCTET STRING, nqaAdminExtPara35 OCTET STRING, nqaAdminExtPara36 OCTET STRING, nqaAdminExtPara37 OCTET STRING, nqaAdminExtPara38 OCTET STRING, nqaAdminExtPara39 OCTET STRING, nqaAdminExtPara40 OCTET STRING, nqaAdminExtPara41 OCTET STRING, nqaAdminExtPara42 OCTET STRING, nqaAdminExtPara43 OCTET STRING, nqaAdminExtPara44 OCTET STRING, nqaAdminExtPara45 OCTET STRING, nqaAdminExtPara46 OCTET STRING, nqaAdminExtPara47 OCTET STRING, nqaAdminExtPara48 OCTET STRING, nqaAdminExtPara49 OCTET STRING, nqaAdminExtPara50 OCTET STRING } nqaAdminExtPara1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara2 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 1 } nqaAdminExtPara2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 2 } nqaAdminExtPara3 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara4 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 3 } nqaAdminExtPara4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 4 } nqaAdminExtPara5 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara6 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 5 } nqaAdminExtPara6 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 6 } nqaAdminExtPara7 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara8 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 7 } nqaAdminExtPara8 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 8 } nqaAdminExtPara9 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara10 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 9 } nqaAdminExtPara10 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 10 } nqaAdminExtPara11 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara12 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 11 } nqaAdminExtPara12 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 12 } nqaAdminExtPara13 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara14 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 13 } nqaAdminExtPara14 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 14 } nqaAdminExtPara15 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara16 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 15 } nqaAdminExtPara16 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 16 } nqaAdminExtPara17 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara18 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 17 } nqaAdminExtPara18 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 18 } nqaAdminExtPara19 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara20 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 19 } nqaAdminExtPara20 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 20 } nqaAdminExtPara21 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara22 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 21 } nqaAdminExtPara22 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 22 } nqaAdminExtPara23 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara24 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 23 } nqaAdminExtPara24 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 24 } nqaAdminExtPara25 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara26 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 25 } nqaAdminExtPara26 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 26 } nqaAdminExtPara27 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara28 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 27 } nqaAdminExtPara28 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 28 } nqaAdminExtPara29 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara30 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 29 } nqaAdminExtPara30 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 30 } nqaAdminExtPara31 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara32 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 31 } nqaAdminExtPara32 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 32 } nqaAdminExtPara33 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara34 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 33 } nqaAdminExtPara34 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 34 } nqaAdminExtPara35 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara36 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 35 } nqaAdminExtPara36 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 36 } nqaAdminExtPara37 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara38 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 37 } nqaAdminExtPara38 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 38 } nqaAdminExtPara39 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara40 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 39 } nqaAdminExtPara40 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 40 } nqaAdminExtPara41 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara42 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 41 } nqaAdminExtPara42 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 42 } nqaAdminExtPara43 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara44 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 43 } nqaAdminExtPara44 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 44 } nqaAdminExtPara45 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara46 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 45 } nqaAdminExtPara46 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 46 } nqaAdminExtPara47 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara48 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 47 } nqaAdminExtPara48 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 48 } nqaAdminExtPara49 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the nqaAdminExtPara50 object. The value is automatically assigned by the system after the type of the test case is ascertained." ::= { nqaAdminParaExtEntry 49 } nqaAdminExtPara50 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained." DEFVAL { 0 } ::= { nqaAdminParaExtEntry 50 } nqaEthernetServiceParaTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaEthernetServiceParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameters about Y.1564 test parameters table." ::= { nqaCtrl 6 } nqaEthernetServiceParaEntry OBJECT-TYPE SYNTAX NqaEthernetServiceParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameters about Y.1564 test parameters entry." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaEthernetServiceParaTable 1 } NqaEthernetServiceParaEntry ::= SEQUENCE { nqaEthernetServiceParaFwdSimulationInboundIfIndex InterfaceIndexOrZero, nqaEthernetServiceParaOutboundIfIndex InterfaceIndexOrZero, nqaEthernetServiceParaConfigrationDuration Unsigned32, nqaEthernetServiceParaPerformanceDuration Unsigned32, nqaEthernetServiceParaPacketSizeValue OCTET STRING (SIZE (0..64)), nqaEthernetServiceParaTestFlowId OCTET STRING (SIZE (0..127)), nqaEthernetServiceParaPacketSizeProfile INTEGER, nqaEthernetServiceParaDisorderStatistics INTEGER } nqaEthernetServiceParaFwdSimulationInboundIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the forwarding-simulation inbound interface." DEFVAL { 0 } ::= { nqaEthernetServiceParaEntry 1 } nqaEthernetServiceParaOutboundIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the outbound interface." DEFVAL { 0 } ::= { nqaEthernetServiceParaEntry 2 } nqaEthernetServiceParaConfigrationDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the duration of configration test." DEFVAL { 3 } ::= { nqaEthernetServiceParaEntry 3 } nqaEthernetServiceParaPerformanceDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the duration of performance test." DEFVAL { 15 } ::= { nqaEthernetServiceParaEntry 4 } nqaEthernetServiceParaPacketSizeValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the packet size. The default value is 512." ::= { nqaEthernetServiceParaEntry 5 } nqaEthernetServiceParaTestFlowId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the testflow id." ::= { nqaEthernetServiceParaEntry 6 } nqaEthernetServiceParaPacketSizeProfile OBJECT-TYPE SYNTAX INTEGER{ default(0), simpleImix(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the packet size mode, the default is 0." DEFVAL { default } ::= { nqaEthernetServiceParaEntry 7} nqaEthernetServiceParaDisorderStatistics OBJECT-TYPE SYNTAX INTEGER{ enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether enable packet disorder statistic,the default is disable(1)." DEFVAL { disable } ::= { nqaEthernetServiceParaEntry 8} nqaScheduleTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaScheduleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: nqaScheduleTable describes test instance task scheduling. It implements scheduling of test instances to reduce device burden caused by concurrent tasks. The scheduling content includes the setting of the start time and end time of a single test instance. When several tasks are performed at the same time, the device properly arranges start time and test intervals. Creation restrictions: None Modification restrictions: The Read-create node can be modified when a test instance is in inactive state. Deletion restrictions: None Access restrictions: None " ::= { nqaCtrl 3 } nqaScheduleEntry OBJECT-TYPE SYNTAX NqaScheduleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set start-up in the nqaAdminParaTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaScheduleTable 1 } NqaScheduleEntry ::= SEQUENCE { nqaScheduleStartType INTEGER, nqaScheduleStartTime Unsigned32, nqaScheduleEndType INTEGER, nqaScheduleEndTime Unsigned32, nqaScheduleAgeTime Integer32, nqaScheduleElapsedTime TimeInterval, nqaScheduleNumOfInitiations Integer32, nqaScheduleLastFinishIndex Integer32, nqaScheduleOperStatus INTEGER, nqaScheduleLastCollectIndex Integer32 } nqaScheduleStartType OBJECT-TYPE SYNTAX INTEGER{ default(0), startNow(1), startAt(2), startAfter(3), startDaily(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the start type of the test instance. The object is used together with nqaScheduleStartTime." DEFVAL { default } ::= { nqaScheduleEntry 1 } nqaScheduleStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the start time of the test instance. Setting the value to 0 indicates to start the test instance immediately. After configuring this object, the status of the test instance is active, and the parameters of the test instance cannot be changed." ::= { nqaScheduleEntry 2 } nqaScheduleEndType OBJECT-TYPE SYNTAX INTEGER{ default(0), endAt(1), endAfter(2), endLifetime(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the end type of the test instance. The object is used together with nqaScheduleEndTime." DEFVAL { default } ::= { nqaScheduleEntry 3 } nqaScheduleEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the end time of the test instance." ::= { nqaScheduleEntry 4 } nqaScheduleAgeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the aging time of the test instance, the time how long the test instance will be reserved in NQA, after the test instance is inactive. Setting the value to 0 indicates reserving the test instance eternally." ::= { nqaScheduleEntry 5 } nqaScheduleElapsedTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time (the period of time after task dispatch)." ::= { nqaScheduleEntry 6 } nqaScheduleNumOfInitiations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the times that the test instance has been initialed. This object is used as the index of the result table, HTTP statistics table, jitter statistics table, FTP statistics table and history table." ::= { nqaScheduleEntry 7 } nqaScheduleLastFinishIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the latest finished test of the test instance, which is used as the index of the result table." ::= { nqaScheduleEntry 8 } nqaScheduleOperStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), stop(2), restart(3), active(4), inactive(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the status of dispatching operation: - reset: Clear all the records of the test instance. - stop: Stop the test instance, if it's running. - restart: Stop the test instance, if it's running, and restart the test instance immediately. - active: The test instance is running; the parameters of the test instances cannot be changed. - inactive: The test instance doesn't be scheduled; the parameters of the test instances can be changed." ::= { nqaScheduleEntry 9 } nqaScheduleLastCollectIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the index of the latest collection statistics result record in the collection result table." ::= { nqaScheduleEntry 10 } nqaGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set group for a test." ::= { nqaCtrl 4 } nqaGroupEntry OBJECT-TYPE SYNTAX NqaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set parameters in the nqaGroupTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName } ::= { nqaGroupTable 1 } NqaGroupEntry ::= SEQUENCE { nqaGroupStatusType INTEGER, nqaGroupPeriod Integer32, nqaGroupLeaderOwnerIndex SnmpAdminString, nqaGroupLeaderTestName SnmpAdminString, nqaGroupMemberNum Integer32, nqaGroupMemberFree EnableValue } nqaGroupStatusType OBJECT-TYPE SYNTAX INTEGER { normal(1), leader(2), member(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the group status of the test instance. The value can be normal (1), leader (2) or member (3)." DEFVAL { normal } ::= { nqaGroupEntry 1 } nqaGroupPeriod OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the interval during which all members in the specified group will be executed." DEFVAL { 60 } ::= { nqaGroupEntry 2 } nqaGroupLeaderOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the owner index of the group leader, if the test instance is a member of the group." ::= { nqaGroupEntry 3 } nqaGroupLeaderTestName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the test name of the group leader, if the test instance is a member of the group." ::= { nqaGroupEntry 4 } nqaGroupMemberNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of member in the group." ::= { nqaGroupEntry 5 } nqaGroupMemberFree OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Free all members in the group." ::= { nqaGroupEntry 6 } nqaServer OBJECT IDENTIFIER ::= { nqa 3 } nqaServerEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables NQA server, which can be the echo server of TCP, UDP and jitter type test instance." ::= { nqaServer 1 } nqaTcpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa tcp server configuration information." ::= { nqaServer 2 } nqaTcpServerEntry OBJECT-TYPE SYNTAX NqaTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa tcp server configuration information. This entry is included not only the tcp server ip address but also the tcp server tcp port. If used for VPN it is also included the VPN name." INDEX { nqaTcpServerAddress, nqaTcpServerPort, nqaTcpServerVrfName } ::= { nqaTcpServerTable 1 } NqaTcpServerEntry ::= SEQUENCE { nqaTcpServerAddressType InetAddressType, nqaTcpServerAddress InetAddress, nqaTcpServerPort InetPortNumber, nqaTcpServerVrfName DisplayString, nqaTcpServerStatus RowStatus } nqaTcpServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the address type of TCP server." DEFVAL { unknown } ::= { nqaTcpServerEntry 1 } nqaTcpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address of TCP server." ::= { nqaTcpServerEntry 2 } nqaTcpServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the port number on which TCP server is listening." ::= { nqaTcpServerEntry 3 } nqaTcpServerVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the VRF (VPN Routing & Forwarding) instances name of the TCP server." ::= { nqaTcpServerEntry 4 } nqaTcpServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation of the TCP server, creating or deleting." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaTcpServerEntry 5 } nqaUdpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: This table describes how to configure the NQA UDP service of the server, such as configuring a protocol, IP address, port number, and VRF. Creation restrictions The entries in this table can be created only when the indexes nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName are specified. The nqaUdpServerAddressType index value must be ipv4(1). The nqaUdpServerStatus index value must be CreateAndGo (4). Modification restrictions: The entries in this table cannot be modified. Deletion restrictions The entries in this table can be deleted. Indexes must be specified. The nqaUdpServerStatus index value must be Destroy (6). Access restrictions The entries in this table can be accessed only when the nqaUdpServerStatus index value is active(1) or notInService(2)." ::= { nqaServer 3 } nqaUdpServerEntry OBJECT-TYPE SYNTAX NqaUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa udp server configuration information. This entry is includeed not only the udp server ip address but also the udp server udp port.If used for VPN it is also included the VPN name." INDEX { nqaUdpServerAddress, nqaUdpServerPort, nqaUdpServerVrfName } ::= { nqaUdpServerTable 1 } NqaUdpServerEntry ::= SEQUENCE { nqaUdpServerAddressType InetAddressType, nqaUdpServerAddress InetAddress, nqaUdpServerPort InetPortNumber, nqaUdpServerVrfName DisplayString, nqaUdpServerStatus RowStatus } nqaUdpServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the address type of UDP server." DEFVAL { unknown } ::= { nqaUdpServerEntry 1 } nqaUdpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address of UDP server." ::= { nqaUdpServerEntry 2 } nqaUdpServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the port number on which UDP server is listening." ::= { nqaUdpServerEntry 3 } nqaUdpServerVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the VRF (VPN Routing & Forwarding) instances name of the UDP server." ::= { nqaUdpServerEntry 4 } nqaUdpServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation of the UDP server, creating or deleting." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaUdpServerEntry 5 } nqaIcmpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaIcmpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: This table describes how to configure the NQA ICMP service of the server, such as configuring a server, IP address, and VRF. Creation restrictions The entries in this table can be created only when the indexes nqaIcmpServerAddress and nqaUdpServerVrfName are specified. The nqaIcmpServerAddressType index value must be ipv4(1). The nqaIcmpServerStatus index value must be CreateAndGo (4). Modification restrictions: The entries in this table cannot be modified. Deletion restrictions The entries in this table can be deleted. Indexes must be specified. The nqaIcmpServerStatus index value must be 6(Destroy). Access restrictions If the nqaIcmpServerStatus value returned is active(1), the ICMP server is running. If the nqaIcmpServerStatus value returned is notInService(2), the ICMP server has stopped running." ::= { nqaServer 4 } nqaIcmpServerEntry OBJECT-TYPE SYNTAX NqaIcmpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa ICMP server configuration information. This entry is included the ICMP server IP address. If used for VPN it is also included the VPN name." INDEX { nqaIcmpServerAddress, nqaIcmpServerVrfName } ::= { nqaIcmpServerTable 1 } NqaIcmpServerEntry ::= SEQUENCE { nqaIcmpServerAddress InetAddress, nqaIcmpServerVrfName DisplayString, nqaIcmpServerAddressType InetAddressType, nqaIcmpServerStatus RowStatus } nqaIcmpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address of ICMP server." ::= { nqaIcmpServerEntry 1 } nqaIcmpServerVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the VRF (VPN Routing & Forwarding) instances name of the ICMP server." ::= { nqaIcmpServerEntry 2 } nqaIcmpServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the address type of ICMP server." DEFVAL { unknown } ::= { nqaIcmpServerEntry 3 } nqaIcmpServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation of the ICMP server, creating or deleting." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaIcmpServerEntry 51 } nqaRtpUdpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaRtpUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa rtp-udp server configuration information." ::= { nqaServer 5 } nqaRtpUdpServerEntry OBJECT-TYPE SYNTAX NqaRtpUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of nqa rtp-udp server configuration information. This entry is includeed not only the rtp-udp server ip address but also the rtp-udp server udp port.If used for VPN it is also included the VPN name." INDEX { nqaRtpUdpServerAddress, nqaRtpUdpServerPort, nqaRtpUdpServerVrfName } ::= { nqaRtpUdpServerTable 1 } NqaRtpUdpServerEntry ::= SEQUENCE { nqaRtpUdpServerAddressType InetAddressType, nqaRtpUdpServerAddress InetAddress, nqaRtpUdpServerPort InetPortNumber, nqaRtpUdpServerVrfName DisplayString, nqaRtpUdpServerStatus RowStatus, nqaRtpUdpServerSoftwareBased EnabledStatus } nqaRtpUdpServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the address type of rtp-udp server." DEFVAL { unknown } ::= { nqaRtpUdpServerEntry 1 } nqaRtpUdpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address of rtp-udp server." ::= { nqaRtpUdpServerEntry 2 } nqaRtpUdpServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the port number on which rtp-udp server is listening." ::= { nqaRtpUdpServerEntry 3 } nqaRtpUdpServerVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the VRF (VPN Routing & Forwarding) instances name of the rtp-udp server." ::= { nqaRtpUdpServerEntry 4 } nqaRtpUdpServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation of the rtp-udp server, creating or deleting." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaRtpUdpServerEntry 5 } nqaRtpUdpServerSoftwareBased OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the software-based test is enabled only when the test case type is rtptest. (The value range: enable:1;disable:2.The default value is disable(2))" ::= { nqaRtpUdpServerEntry 6 } -- BEGIN:nqa-rtp nqaRtpTcpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaRtpTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the status of nqa rtp-tcp server configurations." ::= { nqaServer 6 } nqaRtpTcpServerEntry OBJECT-TYPE SYNTAX NqaRtpTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the status of nqa rtp-tcp server configurations. This entry includes not only the rtp-tcp server ip address but also the rtp-tcp server udp port. If it is used for VPN, the VPN name is also included." INDEX { nqaRtpTcpServerAddress, nqaRtpTcpServerPort, nqaRtpTcpServerVrfName } ::= { nqaRtpTcpServerTable 1 } NqaRtpTcpServerEntry ::= SEQUENCE { nqaRtpTcpServerAddressType InetAddressType, nqaRtpTcpServerAddress InetAddress, nqaRtpTcpServerPort InetPortNumber, nqaRtpTcpServerVrfName DisplayString, nqaRtpTcpServerStatus RowStatus } nqaRtpTcpServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the address type of the rtp-tcp server." DEFVAL { unknown } ::= { nqaRtpTcpServerEntry 1 } nqaRtpTcpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address of the rtp-tcp server." ::= { nqaRtpTcpServerEntry 2 } nqaRtpTcpServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the number of the port on which the rtp-tcp server is listening." ::= { nqaRtpTcpServerEntry 3 } nqaRtpTcpServerVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the VRF (VPN Routing & Forwarding) names of the rtp-tcp server." ::= { nqaRtpTcpServerEntry 4 } nqaRtpTcpServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether an rtp-tcp server is created or deleted." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaRtpTcpServerEntry 5 } -- END:nqa-rtp nqaStats OBJECT IDENTIFIER ::= { nqa 4 } nqaResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: This table describes result information of a test instance. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be ICMP, UDP, or TCP. The nqaResultsIndex and nqaResultsHopIndex values must be 0." ::= { nqaStats 1 } nqaResultsEntry OBJECT-TYPE SYNTAX NqaResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, nqaResultsHopIndex } ::= { nqaResultsTable 1 } NqaResultsEntry ::= SEQUENCE { nqaResultsIndex Integer32, nqaResultsHopIndex Integer32, nqaResultsCompletions INTEGER, nqaResultsTestAttempts Counter32, nqaResultsCurHopCount Gauge32, nqaResultsCurProbeCount Gauge32, nqaResultsRTDOverThresholds Counter32, nqaResultsSumCompletionTime Counter32, nqaResultsSumCompletionTime2Low Counter32, nqaResultsSumCompletionTime2High Counter32, nqaResultsCompletionTimeMin Gauge32, nqaResultsCompletionTimeMax Gauge32, nqaResultsDisconnects Counter32, nqaResultsTimeouts Counter32, nqaResultsBusies Counter32, nqaResultsNoConnections Counter32, nqaResultsSequenceErrors Counter32, nqaResultsDrops Counter32, nqaResultsAddressType InetAddressType, nqaResultsAddress InetAddress, nqaResultsProbeResponses Counter32, nqaResultsSentProbes Counter32, nqaResultsLastGoodProbe DateAndTime, nqaResultsLastGoodPath DateAndTime, nqaResultsTestFinished INTEGER , nqaResultsRttAvg Gauge32, nqaResultsLostPacketRatio Gauge32, nqaResultsRingResponseNode Gauge32, nqaResultChangeRecord DisplayString, nqaResultsDetail Unsigned32, nqaResultsChangeToFailureTimes Gauge32, nqaResultsChangeToSuccessTimes Gauge32, nqaResultsChangeToNoResultTimes Gauge32, nqaResultsChangeToNegotiationFailureTimes Gauge32, nqaResultsChangeToAbnormalTimes Gauge32, nqaResultsFailureTimes Gauge32, nqaResultsSuccessTimes Gauge32, nqaResultsNoResultTimes Gauge32, nqaResultsNegotiationFailureTimes Gauge32, nqaResultsAbnormalTimes Gauge32, nqaResultsLastCompletions INTEGER, nqaResultsTestType INTEGER, nqaResultsSourceIP DisplayString, nqaResultsSourceIfName DisplayString, nqaResultsDestinationIP DisplayString } nqaResultsIndex OBJECT-TYPE SYNTAX Integer32 (0..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. " ::= { nqaResultsEntry 1 } nqaResultsHopIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1." ::= { nqaResultsEntry 2 } nqaResultsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2), negotiateFailed(3), abnormal(5), init(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaResultsEntry 3 } nqaResultsTestAttempts OBJECT-TYPE SYNTAX Counter32 UNITS "tests" MAX-ACCESS read-only STATUS current DESCRIPTION "The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0." ::= { nqaResultsEntry 4 } nqaResultsCurHopCount OBJECT-TYPE SYNTAX Gauge32 UNITS "hops" MAX-ACCESS read-only STATUS current DESCRIPTION "It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0." ::= { nqaResultsEntry 5 } nqaResultsCurProbeCount OBJECT-TYPE SYNTAX Gauge32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index." ::= { nqaResultsEntry 6 } nqaResultsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful statistics test RTD (Round Trip Delay) over the threshold." ::= { nqaResultsEntry 7 } nqaResultsSumCompletionTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on." ::= { nqaResultsEntry 8 } nqaResultsSumCompletionTime2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). " ::= { nqaResultsEntry 9 } nqaResultsSumCompletionTime2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. " ::= { nqaResultsEntry 10 } nqaResultsCompletionTimeMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. " ::= { nqaResultsEntry 11 } nqaResultsCompletionTimeMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test." ::= { nqaResultsEntry 12 } nqaResultsDisconnects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of consecutive failures. For connectionless protocol type of test, this number should be zero." ::= { nqaResultsEntry 13 } nqaResultsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaResultsEntry 14 } nqaResultsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of failure to apply resource due to the busy system. such as apply memory or create socket failure." ::= { nqaResultsEntry 15 } nqaResultsNoConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. " ::= { nqaResultsEntry 16 } nqaResultsSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected " ::= { nqaResultsEntry 17 } nqaResultsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending or connecting failure." ::= { nqaResultsEntry 18 } nqaResultsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaResultsEntry 19 } nqaResultsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests)." ::= { nqaResultsEntry 20 } nqaResultsProbeResponses OBJECT-TYPE SYNTAX Counter32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { nqaResultsEntry 21 } nqaResultsSentProbes OBJECT-TYPE SYNTAX Counter32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent." ::= { nqaResultsEntry 22 } nqaResultsLastGoodProbe OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time when the last response was received for a probe." ::= { nqaResultsEntry 23 } nqaResultsLastGoodPath OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the last complete path was determined." ::= { nqaResultsEntry 24 } nqaResultsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaResultsEntry 25 } nqaResultsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaResultsEntry 26} nqaResultsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaResultsEntry 27 } nqaResultsRingResponseNode OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring response node ID, invalid value of 0." ::= { nqaResultsEntry 28 } nqaResultChangeRecord OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangePackedNotification." ::= { nqaResultsEntry 29 } nqaResultsChangeToFailureTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 31 } nqaResultsChangeToSuccessTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 32 } nqaResultsChangeToNoResultTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 33 } nqaResultsChangeToNegotiationFailureTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 34 } nqaResultsChangeToAbnormalTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 35 } nqaResultsFailureTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 36 } nqaResultsSuccessTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 37 } nqaResultsNoResultTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 38 } nqaResultsNegotiationFailureTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 39 } nqaResultsAbnormalTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Records result change information for nqaResultsTestResultChangeNotification." ::= { nqaResultsEntry 40 } nqaResultsLastCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2), negotiateFailed(3), abnormal(5), init(255) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The status of test." ::= { nqaResultsEntry 41 } nqaResultsTestType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2), jitter(5), icmp(6), snmp(7), trace(8), dns(11), pwe3ping(14), pwe3trace(15), macping(18), icmpjitter(22), vplsping(26), vplspwping(32), vplspwtrace(33) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Test type." ::= { nqaResultsEntry 42} nqaResultsSourceIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Source IP." ::= { nqaResultsEntry 43} nqaResultsSourceIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Source interface name." ::= { nqaResultsEntry 44} nqaResultsDestinationIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Destiation IP." ::= { nqaResultsEntry 45} nqaHTTPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaHTTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the HTTP Operations Statistics Table for storing the statistics of a HTTP test." ::= { nqaStats 2 } nqaHTTPStatsEntry OBJECT-TYPE SYNTAX NqaHTTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaHTTPStatsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHTTPStatsIndex } ::= { nqaHTTPStatsTable 1 } NqaHTTPStatsEntry ::= SEQUENCE { nqaHTTPStatsIndex Integer32, nqaHTTPStatsCompletions INTEGER, nqaHTTPStatsRTDOverThresholds Counter32, nqaHTTPStatsRTTSum Counter32, nqaHTTPStatsRTTMin Gauge32, nqaHTTPStatsRTTMax Gauge32, nqaHTTPStatsDNSRTTSum Counter32, nqaHTTPStatsDNSRTTMin Gauge32, nqaHTTPStatsDNSRTTMax Gauge32, nqaHTTPStatsTCPConnectRTTSum Counter32, nqaHTTPStatsTCPConnectRTTMin Gauge32, nqaHTTPStatsTCPConnectRTTMax Gauge32, nqaHTTPStatsTransactionRTTSum Counter32, nqaHTTPStatsTransactionRTTMin Gauge32, nqaHTTPStatsTransactionRTTMax Gauge32, nqaHTTPStatsMessageBodyOctetsSum Counter32, nqaHTTPStatsDNSServerTimeouts Counter32, nqaHTTPStatsTCPConnectTimeouts Counter32, nqaHTTPStatsTransactionTimeouts Counter32, nqaHTTPStatsDNSQueryErrors Counter32, nqaHTTPStatsErrors Counter32, nqaHTTPStatsTcpConnErrors Counter32, nqaHTTPStatsProbeResponses Counter32, nqaHTTPStatsSendProbes Counter32, nqaHTTPStatsBusies Counter32, nqaHTTPStatsTestFinished INTEGER, nqaHTTPStatsRttAvg Gauge32, nqaHTTPStatsLostPacketRatio Gauge32 } nqaHTTPStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The The HTTP statistics table index and times of dispatching dependency tests." ::= { nqaHTTPStatsEntry 1 } nqaHTTPStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of HTTP test." ::= { nqaHTTPStatsEntry 2 } nqaHTTPStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of HTTP operations RTD (Round Trip Delay) that violate threshold." ::= { nqaHTTPStatsEntry 3 } nqaHTTPStatsRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of delay time of successful HTTP probes, including the sum of time of DNS query, TCP establishment and packets transmission." ::= { nqaHTTPStatsEntry 4 } nqaHTTPStatsRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of HTTP probe time." ::= { nqaHTTPStatsEntry 5 } nqaHTTPStatsRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of HTTP probe time." ::= { nqaHTTPStatsEntry 6 } nqaHTTPStatsDNSRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of DNS query time." ::= { nqaHTTPStatsEntry 7 } nqaHTTPStatsDNSRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of DNS query time." ::= { nqaHTTPStatsEntry 8 } nqaHTTPStatsDNSRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of DNS query time." ::= { nqaHTTPStatsEntry 9 } nqaHTTPStatsTCPConnectRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of TCP connection time." ::= { nqaHTTPStatsEntry 10 } nqaHTTPStatsTCPConnectRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of TCP connection time." ::= { nqaHTTPStatsEntry 11 } nqaHTTPStatsTCPConnectRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of TCP connection time." ::= { nqaHTTPStatsEntry 12 } nqaHTTPStatsTransactionRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of transaction time." ::= { nqaHTTPStatsEntry 13 } nqaHTTPStatsTransactionRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of transaction time." ::= { nqaHTTPStatsEntry 14 } nqaHTTPStatsTransactionRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of transaction time." ::= { nqaHTTPStatsEntry 15 } nqaHTTPStatsMessageBodyOctetsSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the size of the message body received as a response to the HTTP request." ::= { nqaHTTPStatsEntry 16 } nqaHTTPStatsDNSServerTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out during DNS query." ::= { nqaHTTPStatsEntry 17 } nqaHTTPStatsTCPConnectTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out during HTTP connection." ::= { nqaHTTPStatsEntry 18 } nqaHTTPStatsTransactionTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out during HTTP transaction." ::= { nqaHTTPStatsEntry 19 } nqaHTTPStatsDNSQueryErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that had DNS query errors." ::= { nqaHTTPStatsEntry 20 } nqaHTTPStatsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of HTTP transaction failures." ::= { nqaHTTPStatsEntry 21 } nqaHTTPStatsTcpConnErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCP connection failures." ::= { nqaHTTPStatsEntry 22 } nqaHTTPStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { nqaHTTPStatsEntry 23 } nqaHTTPStatsSendProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sending probes." ::= { nqaHTTPStatsEntry 24 } nqaHTTPStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a HTTP operation could not be initiated because an internal error." ::= { nqaHTTPStatsEntry 25 } nqaHTTPStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaHTTPStatsEntry 26 } nqaHTTPStatsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaHTTPStatsEntry 27} nqaHTTPStatsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaHTTPStatsEntry 28 } nqaJitterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: nqaJitterStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be ICMP, UDP, or TCP." ::= { nqaStats 3 } nqaJitterStatsEntry OBJECT-TYPE SYNTAX NqaJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterStatsIndex } ::= { nqaJitterStatsTable 1 } NqaJitterStatsEntry ::= SEQUENCE { nqaJitterStatsIndex Integer32, nqaJitterStatsCompletions INTEGER, nqaJitterStatsRTDOverThresholds Counter32, nqaJitterStatsNumOfRTT Counter32, nqaJitterStatsRTTSum Counter32, nqaJitterStatsRTTSum2Low Counter32, nqaJitterStatsRTTSum2High Counter32, nqaJitterStatsRTTMin Gauge32, nqaJitterStatsRTTMax Gauge32, nqaJitterStatsMinOfPositivesSD Gauge32, nqaJitterStatsMaxOfPositivesSD Gauge32, nqaJitterStatsNumOfPositivesSD Counter32, nqaJitterStatsSumOfPositivesSD Counter32, nqaJitterStatsSum2OfPositivesSDLow Counter32, nqaJitterStatsSum2OfPositivesSDHigh Counter32, nqaJitterStatsMinOfNegativesSD Gauge32, nqaJitterStatsMaxOfNegativesSD Gauge32, nqaJitterStatsNumOfNegativesSD Counter32, nqaJitterStatsSumOfNegativesSD Counter32, nqaJitterStatsSum2OfNegativesSDLow Counter32, nqaJitterStatsSum2OfNegativesSDHigh Counter32, nqaJitterStatsMinOfPositivesDS Gauge32, nqaJitterStatsMaxOfPositivesDS Gauge32, nqaJitterStatsNumOfPositivesDS Counter32, nqaJitterStatsSumOfPositivesDS Counter32, nqaJitterStatsSum2OfPositivesDSLow Counter32, nqaJitterStatsSum2OfPositivesDSHigh Counter32, nqaJitterStatsMinOfNegativesDS Gauge32, nqaJitterStatsMaxOfNegativesDS Gauge32, nqaJitterStatsNumOfNegativesDS Counter32, nqaJitterStatsSumOfNegativesDS Counter32, nqaJitterStatsSum2OfNegativesDSLow Counter32, nqaJitterStatsSum2OfNegativesDSHigh Counter32, nqaJitterStatsPacketLossSD Counter32, nqaJitterStatsPacketLossDS Counter32, nqaJitterStatsPacketOutOfSequences Counter32, nqaJitterStatsErrors Counter32, nqaJitterStatsBusies Counter32, nqaJitterStatsTimeouts Counter32, nqaJitterStatsProbeResponses Counter32, nqaJitterStatsSentProbes Counter32, nqaJitterStatsDrops Counter32, nqaJitterStatsTestFinished INTEGER, nqaJitterStatsMaxDelaySD Gauge32, nqaJitterStatsMaxDelayDS Gauge32, nqaJitterStatsRTTAvg Gauge32, nqaJitterStatsPacketLossRatio Gauge32, nqaJitterStatsAvgJitter Gauge32, nqaJitterStatsAvgJitterSD Gauge32, nqaJitterStatsAvgJitterDS Gauge32, nqaJitterStatsJitterOut OCTET STRING, nqaJitterStatsJitterIn OCTET STRING, nqaJitterStatsOWDOverThresholdsSD Counter32, nqaJitterStatsPktLossUnknown Counter32, nqaJitterStatsNumOfOWD Counter32, nqaJitterStatsOWSumSD Counter32, nqaJitterStatsOWSumDS Counter32, nqaJitterStatsOWDOverThresholdsDS Counter32, nqaJitterStatsOperOfIcpif Gauge32, nqaJitterStatsOperOfMos Gauge32, nqaJitterStatsMinDelaySD Gauge32, nqaJitterStatsSum2DelaySDLow Gauge32, nqaJitterStatsSum2DelaySDHigh Counter32, nqaJitterStatsMinDelayDS Gauge32, nqaJitterStatsSum2DelayDSLow Gauge32, nqaJitterStatsSum2DelayDSHigh Counter32, nqaJitterStatsTimeUnit INTEGER, nqaJitterStatsAvgDelaySD Gauge32, nqaJitterStatsAvgDelayDS Gauge32, nqaJitterStatsPktRewriteNum Counter32, nqaJitterStatsPktRewriteRatio Gauge32, nqaJitterStatsPktDisorderNum Counter32, nqaJitterStatsPktDisorderRatio Gauge32, nqaJitterStatsFragPktDisorderNum Counter32, nqaJitterStatsFragPktDisorderRatio Gauge32, nqaJitterStatsJitterOverThresholdsSD Counter32, nqaJitterStatsJitterOverThresholdsDS Counter32, nqaJitterStatsOverallOverThresholds Counter32, nqaJitterStatsStartTime Unsigned32, nqaJitterStatsEndTime Unsigned32, nqaJitterStatsResultDetail Unsigned32 } nqaJitterStatsIndex OBJECT-TYPE SYNTAX Integer32 (0..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The third index of jitter statistics table." ::= { nqaJitterStatsEntry 1 } nqaJitterStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2), negotiateFailed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the test, which value can be noResult (0), success (1), failure (2) or negotiateFailed (3). If the test is still running, the value will be noResult (0)." ::= { nqaJitterStatsEntry 2 } nqaJitterStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate RTD (Round Trip Delay) threshold." ::= { nqaJitterStatsEntry 3 } nqaJitterStatsNumOfRTT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RTTs that are successfully measured by tests." ::= { nqaJitterStatsEntry 4 } nqaJitterStatsRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTTs that are successfully measured." ::= { nqaJitterStatsEntry 5 } nqaJitterStatsRTTSum2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTTs that are successfully measured by tests (low order 32 bits)." ::= { nqaJitterStatsEntry 6 } nqaJitterStatsRTTSum2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTTs that are successfully measured by tests (high order 32 bits)." ::= { nqaJitterStatsEntry 7 } nqaJitterStatsRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of RTTs that were successfully measured by tests." ::= { nqaJitterStatsEntry 8 } nqaJitterStatsRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of RTTs that were successfully measured by tests." ::= { nqaJitterStatsEntry 9 } nqaJitterStatsMinOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterStatsEntry 10 } nqaJitterStatsMaxOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterStatsEntry 11 } nqaJitterStatsNumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all positive jitter values from source to destination." ::= { nqaJitterStatsEntry 12 } nqaJitterStatsSumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterStatsEntry 13 } nqaJitterStatsSum2OfPositivesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits)." ::= { nqaJitterStatsEntry 14 } nqaJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits)." ::= { nqaJitterStatsEntry 15 } nqaJitterStatsMinOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterStatsEntry 16 } nqaJitterStatsMaxOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterStatsEntry 17 } nqaJitterStatsNumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all negative jitter values from source to destination." ::= { nqaJitterStatsEntry 18 } nqaJitterStatsSumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterStatsEntry 19 } nqaJitterStatsSum2OfNegativesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from source to destination (low order 32 bits)." ::= { nqaJitterStatsEntry 20 } nqaJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from source to destination (high order 32 bits)." ::= { nqaJitterStatsEntry 21 } nqaJitterStatsMinOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterStatsEntry 22 } nqaJitterStatsMaxOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterStatsEntry 23 } nqaJitterStatsNumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all positive jitter values from destination to source." ::= { nqaJitterStatsEntry 24 } nqaJitterStatsSumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterStatsEntry 25 } nqaJitterStatsSum2OfPositivesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits)." ::= { nqaJitterStatsEntry 26 } nqaJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits)." ::= { nqaJitterStatsEntry 27 } nqaJitterStatsMinOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterStatsEntry 28 } nqaJitterStatsMaxOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterStatsEntry 29 } nqaJitterStatsNumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all negative jitter values from destination to source." ::= { nqaJitterStatsEntry 30 } nqaJitterStatsSumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterStatsEntry 31 } nqaJitterStatsSum2OfNegativesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from destination to source (low order 32 bits)." ::= { nqaJitterStatsEntry 32 } nqaJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from destination to source (high order 32 bits)." ::= { nqaJitterStatsEntry 33 } nqaJitterStatsPacketLossSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from source to destination." ::= { nqaJitterStatsEntry 34 } nqaJitterStatsPacketLossDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from destination to source." ::= { nqaJitterStatsEntry 35 } nqaJitterStatsPacketOutOfSequences OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets arrived out of sequence." ::= { nqaJitterStatsEntry 36 } nqaJitterStatsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of errors occurred in the test." ::= { nqaJitterStatsEntry 37 } nqaJitterStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a test couldn't be initialized because the previous test has not completed." ::= { nqaJitterStatsEntry 38 } nqaJitterStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses arrived over the time." ::= { nqaJitterStatsEntry 39 } nqaJitterStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses from echo-server for the packets sent by the test." ::= { nqaJitterStatsEntry 40 } nqaJitterStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent in the test." ::= { nqaJitterStatsEntry 41 } nqaJitterStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that were sent failed in the test." ::= { nqaJitterStatsEntry 42 } nqaJitterStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the test, which value can be noFinish (0) or finish (1)." ::= { nqaJitterStatsEntry 43 } nqaJitterStatsMaxDelaySD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from source to destination." ::= { nqaJitterStatsEntry 44 } nqaJitterStatsMaxDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from destination to source." ::= { nqaJitterStatsEntry 45 } nqaJitterStatsRTTAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaJitterStatsEntry 46 } nqaJitterStatsPacketLossRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaJitterStatsEntry 47 } nqaJitterStatsAvgJitter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values that were successfully measured by tests." ::= { nqaJitterStatsEntry 48 } nqaJitterStatsAvgJitterSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from source to destination that were successfully measured by tests." ::= { nqaJitterStatsEntry 49 } nqaJitterStatsAvgJitterDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from destination to source that were successfully measured by tests." ::= { nqaJitterStatsEntry 50 } nqaJitterStatsJitterOut OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter (RFC1889) at responder." ::= { nqaJitterStatsEntry 51 } nqaJitterStatsJitterIn OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter (RFC1889) at sender." ::= { nqaJitterStatsEntry 52 } nqaJitterStatsOWDOverThresholdsSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from source to destination." ::= { nqaJitterStatsEntry 53 } nqaJitterStatsPktLossUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost for which we cannot determine the direction." ::= { nqaJitterStatsEntry 54 } nqaJitterStatsNumOfOWD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OWDs that were successfully measured by tests." ::= { nqaJitterStatsEntry 55 } nqaJitterStatsOWSumSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured by tests from source to destination." ::= { nqaJitterStatsEntry 56 } nqaJitterStatsOWSumDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured by tests from destination to source." ::= { nqaJitterStatsEntry 57 } nqaJitterStatsOWDOverThresholdsDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from destination to source." ::= { nqaJitterStatsEntry 58 } nqaJitterStatsOperOfIcpif OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test." ::= { nqaJitterStatsEntry 59 } nqaJitterStatsOperOfMos OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MOS (Mean Opinion Score) value for the latest jitter test. " ::= { nqaJitterStatsEntry 60} nqaJitterStatsMinDelaySD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all one way time from source to destination." ::= { nqaJitterStatsEntry 61 } nqaJitterStatsSum2DelaySDLow OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the sum of squares of one way time from source to destination." ::= { nqaJitterStatsEntry 62 } nqaJitterStatsSum2DelaySDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of the sum of squares of one way time from source to destination." ::= { nqaJitterStatsEntry 63 } nqaJitterStatsMinDelayDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all one way time from destination to source." ::= { nqaJitterStatsEntry 64 } nqaJitterStatsSum2DelayDSLow OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the sum of squares of one way time from destination to source." ::= { nqaJitterStatsEntry 65 } nqaJitterStatsSum2DelayDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the sum of squares of one way time from destination to source." ::= { nqaJitterStatsEntry 66 } nqaJitterStatsTimeUnit OBJECT-TYPE SYNTAX INTEGER { us(1), -- The unit of the timestamp is us ms(2) -- The unit of the timestamp is ms } MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of the timestamp, ms or us." ::= { nqaJitterStatsEntry 67 } nqaJitterStatsAvgDelaySD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of one way time from source to destination." ::= { nqaJitterStatsEntry 68 } nqaJitterStatsAvgDelayDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of one way time from destination to source." ::= { nqaJitterStatsEntry 69 } nqaJitterStatsPktRewriteNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets have been rewrited." ::= { nqaJitterStatsEntry 70 } nqaJitterStatsPktRewriteRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of packets have been rewrited." ::= { nqaJitterStatsEntry 71 } nqaJitterStatsPktDisorderNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets have been disordered." ::= { nqaJitterStatsEntry 72 } nqaJitterStatsPktDisorderRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of packets have been disordered." ::= { nqaJitterStatsEntry 73 } nqaJitterStatsFragPktDisorderNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets whose fragments have been disordered." ::= { nqaJitterStatsEntry 74 } nqaJitterStatsFragPktDisorderRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of packets whose fragments have been disordered." ::= { nqaJitterStatsEntry 75 } nqaJitterStatsJitterOverThresholdsSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate jitter threshold from source to destination." ::= { nqaJitterStatsEntry 76 } nqaJitterStatsJitterOverThresholdsDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate jitter threshold from destination to source." ::= { nqaJitterStatsEntry 77 } nqaJitterStatsOverallOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that overall violate jitter threshold." ::= { nqaJitterStatsEntry 78 } nqaJitterStatsStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when the Jitter test started." ::= { nqaJitterStatsEntry 79 } nqaJitterStatsEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when the Jitter test ended." ::= { nqaJitterStatsEntry 80 } nqaJitterStatsResultDetail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates detailed result information about the test instance." ::= { nqaJitterStatsEntry 81 } nqaFTPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaFTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the FTP Operations Statistics Table for storing the statistics of a FTP test. " ::= { nqaStats 4 } nqaFTPStatsEntry OBJECT-TYPE SYNTAX NqaFTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaFTPStatsTable. " INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaFTPStatsIndex } ::= { nqaFTPStatsTable 1 } NqaFTPStatsEntry ::= SEQUENCE { nqaFTPStatsIndex Integer32, nqaFTPStatsCompletions INTEGER, nqaFTPStatsRTDOverThresholds Counter32, nqaFTPStatsCtrlConnMaxTime Gauge32, nqaFTPStatsCtrlConnMinTime Gauge32, nqaFTPStatsCtrlConnAveTime Gauge32, nqaFTPStatsDataConnMaxTime Gauge32, nqaFTPStatsDataConnMinTime Gauge32, nqaFTPStatsDataConnAveTime Gauge32, nqaFTPStatsConnectSumTimeMax Gauge32, nqaFTPStatsConnectSumTimeMin Gauge32, nqaFTPStatsConnectSumTimeAve Gauge32, nqaFTPStatsMessageBodyOctetsSum Counter32, nqaFTPStatsErrors Counter32, nqaFTPStatsTimeouts Counter32, nqaFTPStatsDiscontinued Counter32, nqaFTPStatsProbeResponses Counter32, nqaFTPStatsSendProbes Counter32, nqaFTPStatsTestFinished INTEGER, nqaFTPStatsRttAvg Gauge32, nqaFTPStatsLostPacketRatio Gauge32 } nqaFTPStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "FTP statistics table index and times of dispatching dependency tests." ::= { nqaFTPStatsEntry 1 } nqaFTPStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of FTP test." ::= { nqaFTPStatsEntry 2 } nqaFTPStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful statistics test RTD (Round Trip Delay) over the threshold." ::= { nqaFTPStatsEntry 3 } nqaFTPStatsCtrlConnMaxTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the control connection time." ::= { nqaFTPStatsEntry 4 } nqaFTPStatsCtrlConnMinTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of the control connection time." ::= { nqaFTPStatsEntry 5 } nqaFTPStatsCtrlConnAveTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of the control connection time." ::= { nqaFTPStatsEntry 6 } nqaFTPStatsDataConnMaxTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the data connection time." ::= { nqaFTPStatsEntry 7 } nqaFTPStatsDataConnMinTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of the data connection time." ::= { nqaFTPStatsEntry 8 } nqaFTPStatsDataConnAveTime OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of the data connection time." ::= { nqaFTPStatsEntry 9 } nqaFTPStatsConnectSumTimeMax OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the FTP probe time." ::= { nqaFTPStatsEntry 10 } nqaFTPStatsConnectSumTimeMin OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The mininum value of the FTP probe time." ::= { nqaFTPStatsEntry 11 } nqaFTPStatsConnectSumTimeAve OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of the FTP probe time." ::= { nqaFTPStatsEntry 12 } nqaFTPStatsMessageBodyOctetsSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated octets of a FTP test." ::= { nqaFTPStatsEntry 13 } nqaFTPStatsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of some other errors." ::= { nqaFTPStatsEntry 14 } nqaFTPStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a FTP operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaFTPStatsEntry 15 } nqaFTPStatsDiscontinued OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a FTP test was interrupted by the user." ::= { nqaFTPStatsEntry 16 } nqaFTPStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { nqaFTPStatsEntry 17 } nqaFTPStatsSendProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sending probe" ::= { nqaFTPStatsEntry 18 } nqaFTPStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaFTPStatsEntry 19 } nqaFTPStatsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaFTPStatsEntry 20} nqaFTPStatsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaFTPStatsEntry 21 } nqaMpingStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMpingStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the Mping Operations Statistics Table for storing the statistics of a Mping test." ::= { nqaStats 5 } nqaMpingStatsEntry OBJECT-TYPE SYNTAX NqaMpingStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaMpingStatsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingStatsIndex ,nqaMpingStatsReceiverIndex } ::= { nqaMpingStatsTable 1 } NqaMpingStatsEntry ::= SEQUENCE { nqaMpingStatsIndex Integer32, nqaMpingStatsReceiverIndex Integer32, nqaMpingStatsTargetAddressType InetAddressType, nqaMpingStatsTargetAddress InetAddress, nqaMpingStatsReceiverAddress InetAddress, nqaMpingStatsCompletions INTEGER, nqaMpingStatsRTDOverThresholds Counter32, nqaMpingStatsSumCompletionTime Counter32, nqaMpingStatsSumCompletionTime2Low Counter32, nqaMpingStatsSumCompletionTime2High Counter32, nqaMpingStatsCompletionTimeMin Gauge32, nqaMpingStatsCompletionTimeMax Gauge32, nqaMpingStatsTimeouts Counter32, nqaMpingStatsBusies Counter32, nqaMpingStatsSequenceErrors Counter32, nqaMpingStatsDrops Counter32, nqaMpingStatsProbeResponses Counter32, nqaMpingStatsSentProbes Counter32, nqaMpingStatsLastGoodProbe DateAndTime, nqaMpingStatsTestFinished INTEGER, nqaMpingStatsReceiverCount Gauge32, nqaMpingStatsLastFibHit TruthValue, nqaMpingStatsRttAvg Gauge32, nqaMpingStatsLostPacketRatio Gauge32 } nqaMpingStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of mping statistics table, and the times of dispatching dependency tests." ::= { nqaMpingStatsEntry 1 } nqaMpingStatsReceiverIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of receiver ,that received the mping request packet and response the reply packet ." ::= { nqaMpingStatsEntry 2 } nqaMpingStatsTargetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaMpingStatsEntry 3 } nqaMpingStatsTargetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address ." ::= { nqaMpingStatsEntry 4 } nqaMpingStatsReceiverAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of mping receiver" ::= { nqaMpingStatsEntry 5 } nqaMpingStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(1), success(2), failure(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaMpingStatsEntry 6 } nqaMpingStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful statistics test RTD (Round Trip Delay) over the threshold." ::= { nqaMpingStatsEntry 7 } nqaMpingStatsSumCompletionTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT (response time) of sent packets." ::= { nqaMpingStatsEntry 8 } nqaMpingStatsSumCompletionTime2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the sum of squares of RTT (response time) for each packet of test execution. " ::= { nqaMpingStatsEntry 9 } nqaMpingStatsSumCompletionTime2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of the sum of squares of RTT (response time) for each packet of test execution. " ::= { nqaMpingStatsEntry 10 } nqaMpingStatsCompletionTimeMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum RTT of all packets for executing a test. " ::= { nqaMpingStatsEntry 11 } nqaMpingStatsCompletionTimeMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum RTT of all packets in executing a test. " ::= { nqaMpingStatsEntry 12 } nqaMpingStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaMpingStatsEntry 13 } nqaMpingStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of failure to apply resource due to the busy system. such as apply memory or create socket failure." ::= { nqaMpingStatsEntry 14 } nqaMpingStatsSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times that sequence error happends." ::= { nqaMpingStatsEntry 15 } nqaMpingStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending or connecting failure . " ::= { nqaMpingStatsEntry 16 } nqaMpingStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received response packets." ::= { nqaMpingStatsEntry 17 } nqaMpingStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sent packets." ::= { nqaMpingStatsEntry 18 } nqaMpingStatsLastGoodProbe OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time when the last response was received for a probe." ::= { nqaMpingStatsEntry 19 } nqaMpingStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(1), finish(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaMpingStatsEntry 20 } nqaMpingStatsReceiverCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current serial number of receivers." ::= { nqaMpingStatsEntry 21 } nqaMpingStatsLastFibHit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the fib is hit on the device when receiving the last packet." ::= {nqaMpingStatsEntry 22} nqaMpingStatsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaMpingStatsEntry 23} nqaMpingStatsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaMpingStatsEntry 24 } nqaMtracertStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMtracertStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the Mping Operations Statistics Table for storing the statistics of a Mping test." ::= { nqaStats 6 } nqaMtracertStatsEntry OBJECT-TYPE SYNTAX NqaMtracertStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertStatsIndex, nqaMtracertStatsHopIndex } ::= { nqaMtracertStatsTable 1 } NqaMtracertStatsEntry ::= SEQUENCE { nqaMtracertStatsIndex Integer32, nqaMtracertStatsHopIndex Integer32, nqaMtracertStatsAddressType InetAddressType, nqaMtracertStatsAddress InetAddress, nqaMtracertStatsCompletions INTEGER, nqaMtracertStatsCurHopCount Gauge32, nqaMtracertStatsCurProbeCount Gauge32, nqaMtracertStatsRTDOverThresholds Counter32, nqaMtracertStatsTimeouts Counter32, nqaMtracertStatsBusies Counter32, nqaMtracertStatsSequenceErrors Counter32, nqaMtracertStatsDrops Counter32, nqaMtracertStatsProbeResponses Counter32, nqaMtracertStatsSentProbes Counter32, nqaMtracertStatsLastGoodProbe DateAndTime, nqaMtracertStatsLastGoodPath DateAndTime, nqaMtracertStatsTestFinished INTEGER, nqaMtracertStatsCurPathTTL Gauge32, nqaMtracertStatsMaxPathTTL Gauge32, nqaMtracertStatsInPkgLossRate Gauge32, nqaMtracertStatsSGPkgLossRate Gauge32, nqaMtracertStatsInPkgRate Gauge32, nqaMtracertStatsOutPkgRate Gauge32, nqaMtracertStatsTimeDelay Gauge32 } nqaMtracertStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of mping statistics table, and the times of dispatching dependency tests." ::= { nqaMtracertStatsEntry 1 } nqaMtracertStatsHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Mtracert hop " ::= { nqaMtracertStatsEntry 2 } nqaMtracertStatsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaMtracertStatsEntry 3 } nqaMtracertStatsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address (TraceRoute is the source address of the last valuable response package)." ::= { nqaMtracertStatsEntry 4 } nqaMtracertStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(1), success(2), failure(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaMtracertStatsEntry 5 } nqaMtracertStatsCurHopCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is equal to the hop count index executed by current tests. The default value is 0." ::= { nqaMtracertStatsEntry 6 } nqaMtracertStatsCurProbeCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of probe packets in a hop count index." ::= { nqaMtracertStatsEntry 7 } nqaMtracertStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful statistics test RTD (Round Trip Delay) over the threshold." ::= { nqaMtracertStatsEntry 8 } nqaMtracertStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaMtracertStatsEntry 9} nqaMtracertStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of failure to apply resource due to the busy system. such as apply memory or create socket failure." ::= { nqaMtracertStatsEntry 10 } nqaMtracertStatsSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times that sequence error happends." ::= { nqaMtracertStatsEntry 11 } nqaMtracertStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending or connecting failure . " ::= { nqaMtracertStatsEntry 12 } nqaMtracertStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received response packets." ::= { nqaMtracertStatsEntry 13 } nqaMtracertStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sent packets." ::= { nqaMtracertStatsEntry 14 } nqaMtracertStatsLastGoodProbe OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time when the last response was received for a probe." ::= { nqaMtracertStatsEntry 15 } nqaMtracertStatsLastGoodPath OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the last complete path was determined." ::= { nqaMtracertStatsEntry 16 } nqaMtracertStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(1), finish(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaMtracertStatsEntry 17 } nqaMtracertStatsCurPathTTL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL(time to live) of the current path. " ::= { nqaMtracertStatsEntry 18 } nqaMtracertStatsMaxPathTTL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum TTL(time to live) of the path. " ::= { nqaMtracertStatsEntry 19 } nqaMtracertStatsInPkgLossRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The loss rate of the incoming packets." ::= { nqaMtracertStatsEntry 20 } nqaMtracertStatsSGPkgLossRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The loss rate of the packets from source to multicast group." ::= { nqaMtracertStatsEntry 21} nqaMtracertStatsInPkgRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of incoming packets." ::= { nqaMtracertStatsEntry 22 } nqaMtracertStatsOutPkgRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of outgoing packets." ::= { nqaMtracertStatsEntry 23 } nqaMtracertStatsTimeDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time delay of packets from hop to hop." ::= { nqaMtracertStatsEntry 24 } nqaPathMtuStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaPathMtuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the path MTU Operations Statistics Table for storing the statistics of a path MTU test." ::= { nqaStats 7 } nqaPathMtuStatsEntry OBJECT-TYPE SYNTAX NqaPathMtuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaPathMtuStatsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathMtuStatsIndex } ::= { nqaPathMtuStatsTable 1 } NqaPathMtuStatsEntry ::= SEQUENCE { nqaPathMtuStatsIndex Integer32, nqaPathMtuStatsAddressType InetAddressType, nqaPathMtuStatsAddress InetAddress, nqaPathMtuStatsCompletions INTEGER, nqaPathMtuStatsSentProbes Counter32, nqaPathMtuStatsProbeResponses Counter32, nqaPathMtuStatsDiscoveryPathMtuMin Gauge32, nqaPathMtuStatsDiscoveryPathMtuMax Gauge32, nqaPathMtuStatsOptimumFirstStep Gauge32, nqaPathMtuStatsBusies Counter32, nqaPathMtuStatsTimeouts Counter32, nqaPathMtuStatsDrops Counter32, nqaPathMtuStatsPathMtu Gauge32, nqaPathMtuStatsTestFinished INTEGER } nqaPathMtuStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of path MTU statistics table, and the times of dispatching dependency tests." ::= { nqaPathMtuStatsEntry 1 } nqaPathMtuStatsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaPathMtuStatsEntry 2 } nqaPathMtuStatsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address. It is the source address of the ICMP echo reply packet." ::= { nqaPathMtuStatsEntry 3 } nqaPathMtuStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaPathMtuStatsEntry 4 } nqaPathMtuStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sent packets." ::= { nqaPathMtuStatsEntry 5 } nqaPathMtuStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received response packets." ::= { nqaPathMtuStatsEntry 6 } nqaPathMtuStatsDiscoveryPathMtuMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The initial length of packet in the path MTU test. It is the minimal length of a ICMP packet." ::= { nqaPathMtuStatsEntry 7 } nqaPathMtuStatsDiscoveryPathMtuMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximal length of packet in the path MTU test. It is the maximal MTU of local out-interface." ::= { nqaPathMtuStatsEntry 8 } nqaPathMtuStatsOptimumFirstStep OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The optimum first step of the path MTU test. It will take effect if the specified step is lower than it." ::= { nqaPathMtuStatsEntry 9 } nqaPathMtuStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of failure to apply resource due to the busy system. such as apply memory or create socket failure." ::= { nqaPathMtuStatsEntry 10 } nqaPathMtuStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaPathMtuStatsEntry 11 } nqaPathMtuStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending or connecting failure." ::= { nqaPathMtuStatsEntry 12 } nqaPathMtuStatsPathMtu OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of current path MTU." ::= { nqaPathMtuStatsEntry 13 } nqaPathMtuStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { nofinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaPathMtuStatsEntry 14 } nqaPathJitterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaPathJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest path jitter operation." ::= { nqaStats 8 } nqaPathJitterStatsEntry OBJECT-TYPE SYNTAX NqaPathJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest path jitter operation. This entry is created only if the nqaAdminCtrlType is path jitter." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathJitterStatsIndex, nqaPathJitterStatsHopIndex } ::= { nqaPathJitterStatsTable 1 } NqaPathJitterStatsEntry ::= SEQUENCE { nqaPathJitterStatsIndex Integer32, nqaPathJitterStatsHopIndex Integer32, nqaPathJitterStatsCompletions INTEGER, nqaPathJitterStatsAddressType InetAddressType, nqaPathJitterStatsAddress InetAddress, nqaPathJitterStatsRtdOverThresholds Counter32, nqaPathJitterStatsNumOfRtt Counter32, nqaPathJitterStatsRttSum Counter32, nqaPathJitterStatsRttSum2Low Counter32, nqaPathJitterStatsRttSum2High Counter32, nqaPathJitterStatsRttMin Gauge32, nqaPathJitterStatsRttMax Gauge32, nqaPathJitterStatsMinOfPositivesSD Gauge32, nqaPathJitterStatsMaxOfPositivesSD Gauge32, nqaPathJitterStatsNumOfPositivesSD Counter32, nqaPathJitterStatsSumOfPositivesSD Counter32, nqaPathJitterStatsSum2OfPositivesSDLow Counter32, nqaPathJitterStatsSum2OfPositivesSDHigh Counter32, nqaPathJitterStatsMinOfNegativesSD Gauge32, nqaPathJitterStatsMaxOfNegativesSD Gauge32, nqaPathJitterStatsNumOfNegativesSD Counter32, nqaPathJitterStatsSumOfNegativesSD Counter32, nqaPathJitterStatsSum2OfNegativesSDLow Counter32, nqaPathJitterStatsSum2OfNegativesSDHigh Counter32, nqaPathJitterStatsMinOfPositivesDS Gauge32, nqaPathJitterStatsMaxOfPositivesDS Gauge32, nqaPathJitterStatsNumOfPositivesDS Counter32, nqaPathJitterStatsSumOfPositivesDS Counter32, nqaPathJitterStatsSum2OfPositivesDSLow Counter32, nqaPathJitterStatsSum2OfPositivesDSHigh Counter32, nqaPathJitterStatsMinOfNegativesDS Gauge32, nqaPathJitterStatsMaxOfNegativesDS Gauge32, nqaPathJitterStatsNumOfNegativesDS Counter32, nqaPathJitterStatsSumOfNegativesDS Counter32, nqaPathJitterStatsSum2OfNegativesDSLow Counter32, nqaPathJitterStatsSum2OfNegativesDSHigh Counter32, nqaPathJitterStatsPacketLossSD Counter32, nqaPathJitterStatsPacketLossDS Counter32, nqaPathJitterStatsPacketOutOfSequences Counter32, nqaPathJitterStatsErrors Counter32, nqaPathJitterStatsBusies Counter32, nqaPathJitterStatsTimeouts Counter32, nqaPathJitterStatsProbeResponses Counter32, nqaPathJitterStatsSentProbes Counter32, nqaPathJitterStatsDrops Counter32, nqaPathJitterStatsTestFinished INTEGER, nqaPathJitterStatsMaxDelaySD Gauge32, nqaPathJitterStatsMaxDelayDS Gauge32, nqaPathJitterStatsRttAvg Gauge32, nqaPathJitterStatsPacketLossRatio Gauge32, nqaPathJitterStatsAvgJitter Gauge32, nqaPathJitterStatsAvgJitterSD Gauge32, nqaPathJitterStatsAvgJitterDS Gauge32, nqaPathJitterStatsJitterOut OCTET STRING, nqaPathJitterStatsJitterIn OCTET STRING, nqaPathJitterStatsOwdOverThresholdsSD Counter32, nqaPathJitterStatsPktLossUnknown Counter32, nqaPathJitterStatsNumOfOwd Counter32, nqaPathJitterStatsOwdSumSD Counter32, nqaPathJitterStatsOwdSumDS Counter32, nqaPathJitterStatsOwdOverThresholdsDS Counter32 } nqaPathJitterStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of path jitter statistics table, and the times of dispatching dependency tests." ::= { nqaPathJitterStatsEntry 1 } nqaPathJitterStatsHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of path jitter hop." ::= { nqaPathJitterStatsEntry 2 } nqaPathJitterStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of path jitter test." ::= { nqaPathJitterStatsEntry 3 } nqaPathJitterStatsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type in a hop of path jitter test, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaPathJitterStatsEntry 4 } nqaPathJitterStatsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 5 } nqaPathJitterStatsRtdOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful executions who's RTD over the threshold in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 6 } nqaPathJitterStatsNumOfRtt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times that statistics RTT successfully in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 7 } nqaPathJitterStatsRttSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTTs in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 8 } nqaPathJitterStatsRttSum2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 9 } nqaPathJitterStatsRttSum2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 10 } nqaPathJitterStatsRttMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of RTTs that successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 11 } nqaPathJitterStatsRttMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of RTTs that successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 12 } nqaPathJitterStatsMinOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 13 } nqaPathJitterStatsMaxOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 14 } nqaPathJitterStatsNumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 15 } nqaPathJitterStatsSumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 16 } nqaPathJitterStatsSum2OfPositivesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 17 } nqaPathJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 18 } nqaPathJitterStatsMinOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 19 } nqaPathJitterStatsMaxOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 20 } nqaPathJitterStatsNumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 21 } nqaPathJitterStatsSumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 22 } nqaPathJitterStatsSum2OfNegativesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 23 } nqaPathJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 24 } nqaPathJitterStatsMinOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 25 } nqaPathJitterStatsMaxOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 26 } nqaPathJitterStatsNumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 27 } nqaPathJitterStatsSumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 28 } nqaPathJitterStatsSum2OfPositivesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of square sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 29 } nqaPathJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of square sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 30 } nqaPathJitterStatsMinOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 31 } nqaPathJitterStatsMaxOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 32 } nqaPathJitterStatsNumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 33 } nqaPathJitterStatsSumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 34 } nqaPathJitterStatsSum2OfNegativesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 35 } nqaPathJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 36 } nqaPathJitterStatsPacketLossSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 37 } nqaPathJitterStatsPacketLossDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 38 } nqaPathJitterStatsPacketOutOfSequences OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that return out of sequence." ::= { nqaPathJitterStatsEntry 39 } nqaPathJitterStatsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of some other errors type." ::= { nqaPathJitterStatsEntry 40 } nqaPathJitterStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a path jitter operation could not be initiated because an internal error." ::= { nqaPathJitterStatsEntry 41 } nqaPathJitterStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaPathJitterStatsEntry 42 } nqaPathJitterStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { nqaPathJitterStatsEntry 43 } nqaPathJitterStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the number of packets sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent." ::= { nqaPathJitterStatsEntry 44 } nqaPathJitterStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending failure." ::= { nqaPathJitterStatsEntry 45 } nqaPathJitterStatsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaPathJitterStatsEntry 46 } nqaPathJitterStatsMaxDelaySD OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 47 } nqaPathJitterStatsMaxDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 48 } nqaPathJitterStatsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 49 } nqaPathJitterStatsPacketLossRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 50 } nqaPathJitterStatsAvgJitter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values that were successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 51 } nqaPathJitterStatsAvgJitterSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of jitters that measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 52 } nqaPathJitterStatsAvgJitterDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of jitters that measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 53 } nqaPathJitterStatsJitterOut OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "jitter (RFC1889) at responder." ::= { nqaPathJitterStatsEntry 54 } nqaPathJitterStatsJitterIn OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter (RFC1889) at sender." ::= { nqaPathJitterStatsEntry 55 } nqaPathJitterStatsOwdOverThresholdsSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 56 } nqaPathJitterStatsPktLossUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lost packets for which we can't determine the direction in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 57 } nqaPathJitterStatsNumOfOwd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OWDs that were successfully measured in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 58 } nqaPathJitterStatsOwdSumSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured from packets sent from source to destination in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 59 } nqaPathJitterStatsOwdSumDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured from packets sent from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 60 } nqaPathJitterStatsOwdOverThresholdsDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from destination to source in a hop of path jitter test." ::= { nqaPathJitterStatsEntry 61 } nqaPppoeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaPppoeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the rolling accumulated history of the PPPoE operation." ::= { nqaStats 9 } nqaPppoeStatsEntry OBJECT-TYPE SYNTAX NqaPppoeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the rolling accumulated history of the PPPoE operation. This entry is created only if the nqaAdminCtrlType is pppoe." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPppoeStatsIndex, nqaPppoeRedialIndex } ::= { nqaPppoeStatsTable 1 } NqaPppoeStatsEntry ::= SEQUENCE { nqaPppoeStatsIndex Integer32, nqaPppoeRedialIndex Integer32, nqaPppoeStatsCompletions INTEGER, nqaPppoeStatsCurrentPhase INTEGER, nqaPppoeStatsErrorMessage INTEGER, nqaPppoeDiscoveryTimeout Gauge32, nqaPppoeLcpTimeout Gauge32, nqaPppoeAuthorizationTimeout Gauge32, nqaPppoeNcpTimeout Gauge32, nqaPppoeConnectionTime Gauge32, nqaPppoeClientSessionId Gauge32, nqaPppoeClientIpAddress InetAddress, nqaPppoeGatewayIpAddress InetAddress } nqaPppoeStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of PPPoE statistics table, and the executing times of dispatching dependency tests." ::= { nqaPppoeStatsEntry 1 } nqaPppoeRedialIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of PPPoE statistics table, and the redialing times of dispatching dependency tests." ::= { nqaPppoeStatsEntry 2 } nqaPppoeStatsCompletions OBJECT-TYPE SYNTAX INTEGER { dialupSuccess(1), dialupFail(2), stop(3), exceptionStop(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of PPPoE operation." ::= { nqaPppoeStatsEntry 3 } nqaPppoeStatsCurrentPhase OBJECT-TYPE SYNTAX INTEGER { discovery(1), lcp(2), authorization(3), ncp(4), online(5), stop(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current phase of PPPoE operation." ::= { nqaPppoeStatsEntry 4 } nqaPppoeStatsErrorMessage OBJECT-TYPE SYNTAX INTEGER { other(1), timeout(2), paramNegotiateFail(3), userAuthenticationFail(4), peerDownRequest(5), noError(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The error message result of PPPoE operation." ::= { nqaPppoeStatsEntry 5 } nqaPppoeDiscoveryTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time for discovery of PPPoE operation." ::= { nqaPppoeStatsEntry 6 } nqaPppoeLcpTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time for lcp negotiate of PPPoE operation." ::= { nqaPppoeStatsEntry 7 } nqaPppoeAuthorizationTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time for authentication of PPPoE operation." ::= { nqaPppoeStatsEntry 8 } nqaPppoeNcpTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time for ncp negotiate of PPPoE operation." ::= { nqaPppoeStatsEntry 9 } nqaPppoeConnectionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time for connection of PPPoE operation." ::= { nqaPppoeStatsEntry 10 } nqaPppoeClientSessionId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The client sessionID of PPPoE operation." ::= { nqaPppoeStatsEntry 11 } nqaPppoeClientIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The client ip address of PPPoE operation." ::= { nqaPppoeStatsEntry 12 } nqaPppoeGatewayIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway ip address of PPPoE operation." ::= { nqaPppoeStatsEntry 13 } nqaRtptestStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaRtptestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the latest rtptest operation." ::= { nqaStats 10 } nqaRtptestStatsEntry OBJECT-TYPE SYNTAX NqaRtptestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaRtptestStatsIndex } ::= { nqaRtptestStatsTable 1 } NqaRtptestStatsEntry ::= SEQUENCE { nqaRtptestStatsIndex Integer32, nqaRtptestStatsCompletions INTEGER, nqaRtptestStatsIpTargetAddressType InetAddressType, nqaRtptestStatsIpTargetAddress InetAddress, nqaRtptestStatsIpTargetPort InetPortNumber, nqaRtptestStatsSourceAddressType InetAddressType, nqaRtptestStatsIpSourceAddress InetAddress, nqaRtptestStatsIpSourcePort InetPortNumber, nqaRtptestStatsMinRtt Unsigned32, nqaRtptestStatsMaxRtt Unsigned32, nqaRtptestStatsAverageRtt Unsigned32, nqaRtptestStatsProbeResponses Counter32, nqaRtptestStatsSentProbes Counter32, nqaRtptestStatsMaxJitter Unsigned32, nqaRtptestStatsMinJitter Unsigned32, nqaRtptestStatsAvgJitter Unsigned32, nqaRtptestStatsLostPacketRatio Unsigned32, nqaRtptestStatsSumRtt Unsigned32, nqaRtptestStatsMinDelaySD Unsigned32, nqaRtptestStatsMaxDelaySD Unsigned32, nqaRtptestStatsAvgDelaySD Unsigned32, nqaRtptestStatsMinJitterSD Unsigned32, nqaRtptestStatsMaxJitterSD Unsigned32, nqaRtptestStatsAvgJitterSD Unsigned32, nqaRtptestStatsLossRateSD Unsigned32, nqaRtptestStatsIPDVSD Unsigned32 } nqaRtptestStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result table index and times of dispatching dependency tests. Each test can only reserve 1 record. The result table only contains rtptest information. " ::= { nqaRtptestStatsEntry 1 } nqaRtptestStatsCompletions OBJECT-TYPE SYNTAX INTEGER { unknown(0), running(1), finished(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaRtptestStatsEntry 2 } nqaRtptestStatsIpTargetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), and ipv4(1)." ::= { nqaRtptestStatsEntry 3 } nqaRtptestStatsIpTargetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of rtptest." ::= { nqaRtptestStatsEntry 4 } nqaRtptestStatsIpTargetPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The target host port of rtptest." ::= { nqaRtptestStatsEntry 5 } nqaRtptestStatsSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The source address type, and the value range can be unknown(0), and ipv4(1)." ::= { nqaRtptestStatsEntry 6 } nqaRtptestStatsIpSourceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of rtptest." ::= { nqaRtptestStatsEntry 7 } nqaRtptestStatsIpSourcePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The source port of rtptest." ::= { nqaRtptestStatsEntry 8 } nqaRtptestStatsMinRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min of RTT that are successfully measured." ::= { nqaRtptestStatsEntry 9 } nqaRtptestStatsMaxRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max of RTT that are successfully measured." ::= { nqaRtptestStatsEntry 10 } nqaRtptestStatsAverageRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that are successfully measured." ::= { nqaRtptestStatsEntry 11 } nqaRtptestStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses from echo-server for the packets sent by the test." ::= { nqaRtptestStatsEntry 12 } nqaRtptestStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the packets sent by the test." ::= { nqaRtptestStatsEntry 13 } nqaRtptestStatsMaxJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max of jitter value that are successfully measured." ::= { nqaRtptestStatsEntry 14 } nqaRtptestStatsMinJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min of jitter value that are successfully measured." ::= { nqaRtptestStatsEntry 15 } nqaRtptestStatsAvgJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter value that are successfully measured." ::= { nqaRtptestStatsEntry 16 } nqaRtptestStatsLostPacketRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaRtptestStatsEntry 17 } nqaRtptestStatsSumRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTTs that are successfully measured." ::= { nqaRtptestStatsEntry 18 } nqaRtptestStatsMinDelaySD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of One Way Delay from source to destination." ::= { nqaRtptestStatsEntry 19 } nqaRtptestStatsMaxDelaySD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of One Way Delay from source to destination." ::= { nqaRtptestStatsEntry 20 } nqaRtptestStatsAvgDelaySD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of One Way Delay from source to destination." ::= { nqaRtptestStatsEntry 21 } nqaRtptestStatsMinJitterSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of jitter value from source to destination." ::= { nqaRtptestStatsEntry 22 } nqaRtptestStatsMaxJitterSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of jitter value from source to destination." ::= { nqaRtptestStatsEntry 23 } nqaRtptestStatsAvgJitterSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter value from source to destination." ::= { nqaRtptestStatsEntry 24 } nqaRtptestStatsLossRateSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets from source to destination." ::= { nqaRtptestStatsEntry 25 } nqaRtptestStatsIPDVSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IPDV(Inter Packet Delay Variation) value from source to destination." ::= { nqaRtptestStatsEntry 26 } nqaRtplistenStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaRtplistenStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the test Results Extend Table for providing the capability of performing test operations at a middle host. The results of these operations are stored in the nqaRtplistenStatsTable . The operation of this table is same as that of nqaResultsTable." ::= { nqaStats 11 } nqaRtplistenStatsEntry OBJECT-TYPE SYNTAX NqaRtplistenStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaRtplistenStatsIndex } ::= { nqaRtplistenStatsTable 1 } NqaRtplistenStatsEntry ::= SEQUENCE { nqaRtplistenStatsIndex Integer32, nqaRtplistenStatsCompletions INTEGER, nqaRtplistenStatsIpTargetAddressType InetAddressType, nqaRtplistenStatsIpTargetAddress InetAddress, nqaRtplistenStatsIpTargetPort InetPortNumber, nqaRtplistenStatsSourceAddressType InetAddressType, nqaRtplistenStatsIpSourceAddress InetAddress, nqaRtplistenStatsIpSourcePort InetPortNumber, nqaRtplistenStatsDSField Unsigned32, nqaRtplistenStatsMaxJitter Unsigned32, nqaRtplistenStatsMinJitter Unsigned32, nqaRtplistenStatsAvgJitter Unsigned32, nqaRtplistenStatsLostPacketRatio Unsigned32, nqaRtplistenStatsMaxLostPacketNumber Unsigned32 } nqaRtplistenStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result table index and times of dispatching dependency tests. Each test can only reserve 1 records. " ::= { nqaRtplistenStatsEntry 1 } nqaRtplistenStatsCompletions OBJECT-TYPE SYNTAX INTEGER { unknown(0), running(1), finished(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaRtplistenStatsEntry 2 } nqaRtplistenStatsIpTargetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), and ipv4(1)" ::= { nqaRtplistenStatsEntry 3 } nqaRtplistenStatsIpTargetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of rtpsnoop." ::= { nqaRtplistenStatsEntry 4 } nqaRtplistenStatsIpTargetPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The target host port of rtpsnoop." ::= { nqaRtplistenStatsEntry 5 } nqaRtplistenStatsSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The source address type, and the value range can be unknown(0), and ipv4(1)." ::= { nqaRtplistenStatsEntry 6 } nqaRtplistenStatsIpSourceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of rtpsnoop." ::= { nqaRtplistenStatsEntry 7 } nqaRtplistenStatsIpSourcePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The source port of rtpsnoop." ::= { nqaRtplistenStatsEntry 8 } nqaRtplistenStatsDSField OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv6 header." ::= { nqaRtplistenStatsEntry 9 } nqaRtplistenStatsMaxJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max of jitter value that are successfully measured." ::= { nqaRtplistenStatsEntry 10 } nqaRtplistenStatsMinJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min of jitter value that are successfully measured." ::= { nqaRtplistenStatsEntry 11 } nqaRtplistenStatsAvgJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter value that are successfully measured." ::= { nqaRtplistenStatsEntry 12 } nqaRtplistenStatsLostPacketRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaRtplistenStatsEntry 13 } nqaRtplistenStatsMaxLostPacketNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max of lost packet during the test running." ::= { nqaRtplistenStatsEntry 14 } nqaGeneralflowStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaGeneralflowStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the test Results Extend Table for testing throughput of network. The results of these operations are stored in the nqaGeneralflowStatsTable." ::= { nqaStats 12 } nqaGeneralflowStatsEntry OBJECT-TYPE SYNTAX NqaGeneralflowStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaGeneralflowStatsIndex, nqaGenralflowStatsFrameSizeId } ::= { nqaGeneralflowStatsTable 1 } NqaGeneralflowStatsEntry ::= SEQUENCE { nqaGeneralflowStatsIndex Integer32, nqaGenralflowStatsFrameSizeId Integer32, nqaGeneralflowStatsCompletions INTEGER, nqaGeneralflowStatsResultDetail Unsigned32, nqaGeneralflowStatsTxRate Unsigned32, nqaGeneralflowStatsRxRate Unsigned32, nqaGeneralflowStatsMinRtt Unsigned32, nqaGeneralflowStatsMaxRtt Unsigned32, nqaGeneralflowStatsAverageRtt Unsigned32, nqaGeneralflowStatsMaxJitter Unsigned32, nqaGeneralflowStatsMinJitter Unsigned32, nqaGeneralflowStatsAvgJitter Unsigned32, nqaGeneralflowStatsTxCountLow Unsigned32, nqaGeneralflowStatsTxCountHigh Unsigned32, nqaGeneralflowStatsRxCountLow Unsigned32, nqaGeneralflowStatsRxCountHigh Unsigned32, nqaGeneralflowStatsFrameLossRate Unsigned32, nqaGeneralflowStatsPrecision Unsigned32, nqaGeneralflowStatsThroughput Unsigned32, nqaGeneralflowStatsDataSize Unsigned32, nqaGeneralflowStatsTestStatus INTEGER, nqaGeneralflowStatsFrameLossRatePrecision Unsigned32, nqaGeneralflowStatsFrameLossRatePrecisionValue Unsigned32, nqaGeneralflowStatsStartTime Unsigned32, nqaGeneralflowStatsEndTime Unsigned32, nqaGeneralflowStatsTestTotalTime Unsigned32, nqaGeneralflowStatsTestRemainingTime Unsigned32, nqaGeneralflowStatsTestTime Unsigned32, nqaGeneralflowStatsEstimatedTestTime Unsigned32, nqaGeneralflowStatsRealTestTime Unsigned32, nqaGeneralflowStatsFrameRate INTEGER, nqaGeneralflowStatsCurrentRateCount Unsigned32 } nqaGeneralflowStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the index of the result table of the generalflow test." ::= { nqaGeneralflowStatsEntry 1 } nqaGenralflowStatsFrameSizeId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the packet size in the Generalflow statistics table. An index corresponds to a packet size." ::= { nqaGeneralflowStatsEntry 2 } nqaGeneralflowStatsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2), finished(3), running(4), ready(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Generalflow test instance has completed the current packet size test. noResult (0) indicates that the current packet size test is running. success(1) indicates that the current packet size test has completed. failure(2) indicates that the current packet size test failed. finished(3) indicates that the current packet size test finished. running(4) indicates that the current packet size test is running. ready(5) indicates that the current packet size test has not started." ::= { nqaGeneralflowStatsEntry 3 } nqaGeneralflowStatsResultDetail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates detailed information about the current packet size test in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 4 } nqaGeneralflowStatsTxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate at which packets with the current size are sent in the Generalflow test instance, in Kbps." ::= { nqaGeneralflowStatsEntry 5 } nqaGeneralflowStatsRxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate at which packets with the current size are received in the Generalflow test instance, in Kbps." ::= { nqaGeneralflowStatsEntry 6 } nqaGeneralflowStatsMinRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum RTT of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 7 } nqaGeneralflowStatsMaxRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum RTT of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 8 } nqaGeneralflowStatsAverageRtt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the average RTT of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 9 } nqaGeneralflowStatsMaxJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum two-way jitter of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 10 } nqaGeneralflowStatsMinJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum two-way jitter of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 11 } nqaGeneralflowStatsAvgJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the average two-way jitter of the current packet size test in the Generalflow test instance, in us." ::= { nqaGeneralflowStatsEntry 12 } nqaGeneralflowStatsTxCountLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the lower 32 bit of the number of packets with the current packet size sent in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 13 } nqaGeneralflowStatsTxCountHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the higher 32 bit of the number of packets with the current packet size sent in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 14 } nqaGeneralflowStatsRxCountLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the lower 32 bit of the number of packets with the current packet size received in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 15 } nqaGeneralflowStatsRxCountHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the higher 32 bit of the number of packets with the current packet size received in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 16 } nqaGeneralflowStatsFrameLossRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss ratio of the current packet size test in the Generalflow test instance,when precision is 10e-4." ::= { nqaGeneralflowStatsEntry 17 } nqaGeneralflowStatsPrecision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the precision of the current packet size test in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 18 } nqaGeneralflowStatsThroughput OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the throughput of the current packet size test in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 19 } nqaGeneralflowStatsDataSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet size of the current packet size test in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 20 } nqaGeneralflowStatsTestStatus OBJECT-TYPE SYNTAX INTEGER { running(0), finished(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the tests of all packet sizes in the Generalflow test instance have completed." ::= { nqaGeneralflowStatsEntry 21 } nqaGeneralflowStatsFrameLossRatePrecision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss ratio precision of the current packet size test in the Generalflow test instance. 0 indicates in 10e-4. 1 indicates in 10e-9." ::= { nqaGeneralflowStatsEntry 22 } nqaGeneralflowStatsFrameLossRatePrecisionValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss ratio value of the current packet size test in the Generalflow test instance." ::= { nqaGeneralflowStatsEntry 23 } nqaGeneralflowStatsStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when the Generalflow test started." ::= { nqaGeneralflowStatsEntry 24 } nqaGeneralflowStatsEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when the Generalflow test ended." ::= { nqaGeneralflowStatsEntry 25 } nqaGeneralflowStatsTestTotalTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total time (in seconds) used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 26 } nqaGeneralflowStatsTestRemainingTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remaining time (in seconds) used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 27 } nqaGeneralflowStatsTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time (in seconds) used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 28 } nqaGeneralflowStatsEstimatedTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the estimated time (in seconds) used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 29 } nqaGeneralflowStatsRealTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the real time (in seconds) used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 30 } nqaGeneralflowStatsFrameRate OBJECT-TYPE SYNTAX INTEGER { l1(1), l2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates an Ethernet frame rate in the Generalflow test. 1: utilized line rate (L1 rate). 2: information rate (L2 rate)." ::= { nqaGeneralflowStatsEntry 31 } nqaGeneralflowStatsCurrentRateCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the count of current rate for throughput used by the Generalflow test." ::= { nqaGeneralflowStatsEntry 32 } nqaGeneralflowCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaGeneralflowCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the current test results for generalflow test type. The results of these operations are stored in the nqaGeneralflowCurrentStatsTable." ::= { nqaStats 13 } nqaGeneralflowCurrentStatsEntry OBJECT-TYPE SYNTAX NqaGeneralflowCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaGeneralflowStatsIndex, nqaGenralflowStatsFrameSizeId, nqaGeneralflowCurrentStatsRateIndex } ::= { nqaGeneralflowCurrentStatsTable 1 } NqaGeneralflowCurrentStatsEntry ::= SEQUENCE { nqaGeneralflowCurrentStatsRateIndex Unsigned32, nqaGeneralflowCurrentStatsThroughput Unsigned32, nqaGeneralflowCurrentStatsFrameLossRate Unsigned32 } nqaGeneralflowCurrentStatsRateIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the index of the current result table of the generalflow test." ::= { nqaGeneralflowCurrentStatsEntry 1 } nqaGeneralflowCurrentStatsThroughput OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current throughput of each packet size test in the Generalflow test instance." ::= { nqaGeneralflowCurrentStatsEntry 2 } nqaGeneralflowCurrentStatsFrameLossRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current packet loss ratio of each packet size test in the Generalflow test instance, when precision is 10e-4." ::= { nqaGeneralflowCurrentStatsEntry 3 } nqaEthernetServiceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaEthernetServiceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collection database. Defines the Y.1564 Operations Statistics Table for storing the statistics of a Y.1564 test." ::= { nqaStats 14 } nqaEthernetServiceStatsEntry OBJECT-TYPE SYNTAX NqaEthernetServiceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest Y.1564 operation. The operation of this table is same as that of nqaResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaEthernetServiceStatsIndex, nqaEthernetServiceStatsTestFlowId, nqaEthernetServiceStatsTestStep } ::= { nqaEthernetServiceStatsTable 1 } NqaEthernetServiceStatsEntry ::= SEQUENCE { nqaEthernetServiceStatsIndex Unsigned32, nqaEthernetServiceStatsTestFlowId Unsigned32, nqaEthernetServiceStatsTestStep Unsigned32, nqaEthernetServiceStatsTestProcess Unsigned32, nqaEthernetServiceStatsTestStatus Unsigned32, nqaEthernetServiceStatsTestFlowNum Unsigned32, nqaEthernetServiceStatsTestMode Unsigned32, nqaEthernetServiceStatsTestBeginTime Unsigned32, nqaEthernetServiceStatsTestEndTime Unsigned32, nqaEthernetServiceStatsTestTotalTime Unsigned32, nqaEthernetServiceStatsTestRealTime Unsigned32, nqaEthernetServiceStatsResultDetail Unsigned32, nqaEthernetServiceStatsTestPhase Unsigned32, nqaEthernetServiceStatsFlowBeginTime Unsigned32, nqaEthernetServiceStatsFlowEndTime Unsigned32, nqaEthernetServiceStatsDisorderPacketsNum OCTET STRING, nqaEthernetServiceStatsFlowResult Unsigned32, nqaEthernetServiceStatsFlowMinIR Unsigned32, nqaEthernetServiceStatsFlowMaxIR Unsigned32, nqaEthernetServiceStatsFlowMeanIR Unsigned32, nqaEthernetServiceStatsFlowMinFTD Unsigned32, nqaEthernetServiceStatsFlowMaxFTD Unsigned32, nqaEthernetServiceStatsFlowMeanFTD Unsigned32, nqaEthernetServiceStatsFlowMinFDV Unsigned32, nqaEthernetServiceStatsFlowMaxFDV Unsigned32, nqaEthernetServiceStatsFlowMeanFDV Unsigned32, nqaEthernetServiceStatsFlowFlCount OCTET STRING, nqaEthernetServiceStatsFlowFLRPrecision Unsigned32, nqaEthernetServiceStatsFlowFLR Unsigned32, nqaEthernetServiceStatsFlowUnavailCount Unsigned32, nqaEthernetServiceStatsFlowAvailPrecision Unsigned32, nqaEthernetServiceStatsFlowAVAIL Unsigned32 } nqaEthernetServiceStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the result table of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 1 } nqaEthernetServiceStatsTestFlowId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The test flow ID of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 2 } nqaEthernetServiceStatsTestStep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the result table of EthernetService test step. 0: cir simple test. 1: cir step test(25% CIR). 2: cir step test(50% CIR). 3: cir step test(75% CIR). 4: cir step test(100% CIR). 5: cir/eir test with color blind mode. 6: cir/eir test with color aware mode. 7: traffic policing test with color blind mode. 8: traffic policing test with color aware mode. 9: performance test. 10: green flow in cir/eir test step. 11: yellow flow in cir/eir test step. 12: total flow in cir/eir test step. 13: green flow in Traffic policing test step. 14: yellow flow in Traffic policing test step. 15: total flow in Traffic policing test step. 16: initial step ." ::= { nqaEthernetServiceStatsEntry 3 } nqaEthernetServiceStatsTestProcess OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The status of Y.1564 test. 0 indicates running 1 indicates finished 2 indicates unknown" ::= { nqaEthernetServiceStatsEntry 4 } nqaEthernetServiceStatsTestStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The result of Y.1564 test. 0 indicates pass, 1 indicates failed, 2 indicates abort, 3 indicates abnormal, 4 indicates initial" ::= { nqaEthernetServiceStatsEntry 5 } nqaEthernetServiceStatsTestFlowNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of test flow" ::= { nqaEthernetServiceStatsEntry 6 } nqaEthernetServiceStatsTestMode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The test mode of Y.1564 test. 0 indicates roundtrip mode." ::= { nqaEthernetServiceStatsEntry 7 } nqaEthernetServiceStatsTestBeginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The begining time of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 8 } nqaEthernetServiceStatsTestEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ending time of Y.1564 test" ::= { nqaEthernetServiceStatsEntry 9 } nqaEthernetServiceStatsTestTotalTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total time of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 10 } nqaEthernetServiceStatsTestRealTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The real test time of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 11 } nqaEthernetServiceStatsResultDetail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The detailed result of Y.1564 test." ::= { nqaEthernetServiceStatsEntry 12 } nqaEthernetServiceStatsTestPhase OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Phases of Y.1564 test. 0 indicates configuration test. 1 indicates performance test." ::= { nqaEthernetServiceStatsEntry 13 } nqaEthernetServiceStatsFlowBeginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The begining time of the test flow." ::= { nqaEthernetServiceStatsEntry 14 } nqaEthernetServiceStatsFlowEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ending time of the test flow." ::= { nqaEthernetServiceStatsEntry 15 } nqaEthernetServiceStatsDisorderPacketsNum OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of disorder packets." ::= { nqaEthernetServiceStatsEntry 16 } nqaEthernetServiceStatsFlowResult OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the test flow. 0 indicates pass. 1 indicates failed. 2 indicates abort. 3 indicates abnormal. 4 indicates initial." ::= { nqaEthernetServiceStatsEntry 17 } nqaEthernetServiceStatsFlowMinIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min IR of the test flow." ::= { nqaEthernetServiceStatsEntry 18 } nqaEthernetServiceStatsFlowMaxIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max IR of the test flow." ::= { nqaEthernetServiceStatsEntry 19 } nqaEthernetServiceStatsFlowMeanIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean IR of the test flow." ::= { nqaEthernetServiceStatsEntry 20 } nqaEthernetServiceStatsFlowMinFTD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min FTD of the test flow." ::= { nqaEthernetServiceStatsEntry 21 } nqaEthernetServiceStatsFlowMaxFTD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max FTD of the test flow." ::= { nqaEthernetServiceStatsEntry 22 } nqaEthernetServiceStatsFlowMeanFTD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean FTD of the test flow." ::= { nqaEthernetServiceStatsEntry 23 } nqaEthernetServiceStatsFlowMinFDV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min FDV of the test flow." ::= { nqaEthernetServiceStatsEntry 24 } nqaEthernetServiceStatsFlowMaxFDV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max FDV of the test flow." ::= { nqaEthernetServiceStatsEntry 25 } nqaEthernetServiceStatsFlowMeanFDV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean FDV of the test flow." ::= { nqaEthernetServiceStatsEntry 26 } nqaEthernetServiceStatsFlowFlCount OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame loss count of the test flow." ::= { nqaEthernetServiceStatsEntry 27 } nqaEthernetServiceStatsFlowFLRPrecision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The FLR precision of the test flow. 0 indicates in 10e-5." ::= { nqaEthernetServiceStatsEntry 28 } nqaEthernetServiceStatsFlowFLR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The FLR of the test flow." ::= { nqaEthernetServiceStatsEntry 29 } nqaEthernetServiceStatsFlowUnavailCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unavail count of the test flow." ::= { nqaEthernetServiceStatsEntry 30 } nqaEthernetServiceStatsFlowAvailPrecision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The avail precision of the test flow. 0 indicates in 10e-5." ::= { nqaEthernetServiceStatsEntry 31 } nqaEthernetServiceStatsFlowAVAIL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The avail value of the test flow." ::= { nqaEthernetServiceStatsEntry 32 } nqaJitterLatestStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaJitterLatestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nqaJitterLatestStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the test instance type is jitter." ::= { nqaStats 15 } nqaJitterLatestStatsEntry OBJECT-TYPE SYNTAX NqaJitterLatestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest Jitter operation." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName} ::= { nqaJitterLatestStatsTable 1 } NqaJitterLatestStatsEntry ::= SEQUENCE { nqaJitterLatestStatsMaxDelaySD Unsigned32, nqaJitterLatestStatsMaxDelayDS Unsigned32, nqaJitterLatestStatsAvgDelaySD Unsigned32, nqaJitterLatestStatsAvgDelayDS Unsigned32, nqaJitterLatestStatsRTTMin Unsigned32, nqaJitterLatestStatsRTTMax Unsigned32, nqaJitterLatestStatsRTTAvg Unsigned32, nqaJitterLatestStatsPacketLossRatio Unsigned32, nqaJitterLatestStatsAvgJitter Unsigned32, nqaJitterLatestStatsAvgJitterSD Unsigned32, nqaJitterLatestStatsAvgJitterDS Unsigned32 } nqaJitterLatestStatsMaxDelaySD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from source to destination." ::= { nqaJitterLatestStatsEntry 1 } nqaJitterLatestStatsMaxDelayDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from destination to source." ::= { nqaJitterLatestStatsEntry 2 } nqaJitterLatestStatsAvgDelaySD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of one way time from source to destination." ::= { nqaJitterLatestStatsEntry 3 } nqaJitterLatestStatsAvgDelayDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of one way time from destination to source." ::= { nqaJitterLatestStatsEntry 4 } nqaJitterLatestStatsRTTMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of RTTs that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 5 } nqaJitterLatestStatsRTTMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of RTTs that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 6 } nqaJitterLatestStatsRTTAvg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 7 } nqaJitterLatestStatsPacketLossRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaJitterLatestStatsEntry 8 } nqaJitterLatestStatsAvgJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 9 } nqaJitterLatestStatsAvgJitterSD OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from source to destination that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 10 } nqaJitterLatestStatsAvgJitterDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from destination to source that were successfully measured by tests." ::= { nqaJitterLatestStatsEntry 11 } nqaMultiPathResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMultiPathResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: This table describes result information of a test instance. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be LSPPING, or LSPTRACE. The nqaMultiPathResultsIndex , nqaMultiPathResultsPathIndex and nqaMultiPathResultsHopIndex values must be 0." ::= { nqaStats 16 } nqaMultiPathResultsEntry OBJECT-TYPE SYNTAX NqaMultiPathResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaMultiPathResultsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMultiPathResultsIndex, nqaMultiPathResultsPathIndex, nqaMultiPathResultsHopIndex } ::= { nqaMultiPathResultsTable 1 } NqaMultiPathResultsEntry ::= SEQUENCE { nqaMultiPathResultsIndex Integer32, nqaMultiPathResultsPathIndex Integer32, nqaMultiPathResultsHopIndex Integer32, nqaMultiPathResultsCompletions INTEGER, nqaMultiPathResultsTestAttempts Counter32, nqaMultiPathResultsCurHopCount Gauge32, nqaMultiPathResultsCurProbeCount Gauge32, nqaMultiPathResultsRTDOverThresholds Counter32, nqaMultiPathResultsSumCompletionTime Counter32, nqaMultiPathResultsSumCompletionTime2Low Counter32, nqaMultiPathResultsSumCompletionTime2High Counter32, nqaMultiPathResultsCompletionTimeMin Gauge32, nqaMultiPathResultsCompletionTimeMax Gauge32, nqaMultiPathResultsDisconnects Counter32, nqaMultiPathResultsTimeouts Counter32, nqaMultiPathResultsBusies Counter32, nqaMultiPathResultsNoConnections Counter32, nqaMultiPathResultsSequenceErrors Counter32, nqaMultiPathResultsDrops Counter32, nqaMultiPathResultsAddressType InetAddressType, nqaMultiPathResultsAddress InetAddress, nqaMultiPathResultsProbeResponses Counter32, nqaMultiPathResultsSentProbes Counter32, nqaMultiPathResultsLastGoodProbe DateAndTime, nqaMultiPathResultsLastGoodPath DateAndTime, nqaMultiPathResultsTestFinished INTEGER, nqaMultiPathResultsRttAvg Gauge32, nqaMultiPathResultsLostPacketRatio Gauge32, nqaMultiPathResultsSrPolicyPreference Gauge32, nqaMultiPathResultsSrPolicyPathType INTEGER, nqaMultiPathResultsSrPolicyProtocol INTEGER, nqaMultiPathResultsSrPolicyNodeAddress InetAddress, nqaMultiPathResultsSrPolicyDiscriminator Gauge32, nqaMultiPathResultsSrPolicySegListId Gauge32, nqaMultiPathResultsSrPolicyXcIndex Gauge32 } nqaMultiPathResultsIndex OBJECT-TYPE SYNTAX Integer32 (0..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. " ::= { nqaMultiPathResultsEntry 1 } nqaMultiPathResultsPathIndex OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The path index." ::= { nqaMultiPathResultsEntry 2 } nqaMultiPathResultsHopIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1." ::= { nqaMultiPathResultsEntry 3 } nqaMultiPathResultsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test." ::= { nqaMultiPathResultsEntry 4 } nqaMultiPathResultsTestAttempts OBJECT-TYPE SYNTAX Counter32 UNITS "tests" MAX-ACCESS read-only STATUS current DESCRIPTION "The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0." ::= { nqaMultiPathResultsEntry 5 } nqaMultiPathResultsCurHopCount OBJECT-TYPE SYNTAX Gauge32 UNITS "hops" MAX-ACCESS read-only STATUS current DESCRIPTION "It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0." ::= { nqaMultiPathResultsEntry 6 } nqaMultiPathResultsCurProbeCount OBJECT-TYPE SYNTAX Gauge32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index." ::= { nqaMultiPathResultsEntry 7 } nqaMultiPathResultsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of successful statistics test RTD (Round Trip Delay) over the threshold." ::= { nqaMultiPathResultsEntry 8 } nqaMultiPathResultsSumCompletionTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on." ::= { nqaMultiPathResultsEntry 9 } nqaMultiPathResultsSumCompletionTime2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). " ::= { nqaMultiPathResultsEntry 10 } nqaMultiPathResultsSumCompletionTime2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. " ::= { nqaMultiPathResultsEntry 11 } nqaMultiPathResultsCompletionTimeMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. " ::= { nqaMultiPathResultsEntry 12 } nqaMultiPathResultsCompletionTimeMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test." ::= { nqaMultiPathResultsEntry 13 } nqaMultiPathResultsDisconnects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of consecutive failures. For connectionless protocol type of test, this number should be zero." ::= { nqaMultiPathResultsEntry 14 } nqaMultiPathResultsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded." ::= { nqaMultiPathResultsEntry 15 } nqaMultiPathResultsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times of failure to apply resource due to the busy system. such as apply memory or create socket failure." ::= { nqaMultiPathResultsEntry 16 } nqaMultiPathResultsNoConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. " ::= { nqaMultiPathResultsEntry 17 } nqaMultiPathResultsSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected " ::= { nqaMultiPathResultsEntry 18 } nqaMultiPathResultsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The times probes of the test dropped due to sending or connecting failure." ::= { nqaMultiPathResultsEntry 19 } nqaMultiPathResultsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)." ::= { nqaMultiPathResultsEntry 20 } nqaMultiPathResultsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests)." ::= { nqaMultiPathResultsEntry 21 } nqaMultiPathResultsProbeResponses OBJECT-TYPE SYNTAX Counter32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { nqaMultiPathResultsEntry 22 } nqaMultiPathResultsSentProbes OBJECT-TYPE SYNTAX Counter32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent." ::= { nqaMultiPathResultsEntry 23 } nqaMultiPathResultsLastGoodProbe OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time when the last response was received for a probe." ::= { nqaMultiPathResultsEntry 24 } nqaMultiPathResultsLastGoodPath OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the last complete path was determined." ::= { nqaMultiPathResultsEntry 25 } nqaMultiPathResultsTestFinished OBJECT-TYPE SYNTAX INTEGER { noFinish(0), finish(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of test execution." ::= { nqaMultiPathResultsEntry 26 } nqaMultiPathResultsRttAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaMultiPathResultsEntry 27} nqaMultiPathResultsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaMultiPathResultsEntry 28 } nqaMultiPathResultsSrPolicyPreference OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preference of the segment list." ::= { nqaMultiPathResultsEntry 29} nqaMultiPathResultsSrPolicyPathType OBJECT-TYPE SYNTAX INTEGER { main(1), backup(0), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The path type of the segment list." ::= { nqaMultiPathResultsEntry 30} nqaMultiPathResultsSrPolicyProtocol OBJECT-TYPE SYNTAX INTEGER { pecp(10), bgp(20), local(30), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol of the segment list." ::= { nqaMultiPathResultsEntry 31} nqaMultiPathResultsSrPolicyNodeAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of the segment list." ::= { nqaMultiPathResultsEntry 32} nqaMultiPathResultsSrPolicyDiscriminator OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The discriminator of the segment list." ::= { nqaMultiPathResultsEntry 33} nqaMultiPathResultsSrPolicySegListId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of the segment list." ::= { nqaMultiPathResultsEntry 34} nqaMultiPathResultsSrPolicyXcIndex OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The xc index of the segment list." ::= { nqaMultiPathResultsEntry 35} nqaLatestStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaLatestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nqaLatestStatsTable describes statistics about the latest network status detection using probe packets. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the test instance type is icmp." ::= { nqaStats 17 } nqaLatestStatsEntry OBJECT-TYPE SYNTAX NqaLatestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of nqaLatestStatsTable." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName} ::= { nqaLatestStatsTable 1 } NqaLatestStatsEntry ::= SEQUENCE { nqaLatestResultsCompletions INTEGER, nqaLatestResultsDstAddress InetAddress, nqaLatestResultSrcAddress InetAddress, nqaLatestResultsLostPacketRatio Gauge32 } nqaLatestResultsCompletions OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The latest status of the test." ::= { nqaLatestStatsEntry 1 } nqaLatestResultsDstAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The latest destination address in the test." ::= { nqaLatestStatsEntry 2 } nqaLatestResultSrcAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The latest source address in the test." ::= { nqaLatestStatsEntry 3 } nqaLatestResultsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaLatestStatsEntry 4 } nqaHistory OBJECT IDENTIFIER ::= { nqa 5 } nqaHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations test History Table for storing the results of a test operation." ::= { nqaHistory 1 } nqaHistoryEntry OBJECT-TYPE SYNTAX NqaHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHistoryIndex, nqaHistoryHopIndex, nqaHistoryProbeIndex } ::= { nqaHistoryTable 1 } NqaHistoryEntry ::= SEQUENCE { nqaHistoryIndex Integer32, nqaHistoryHopIndex Integer32, nqaHistoryProbeIndex Integer32, nqaHistoryTimeStamp DateAndTime, nqaHistoryAddressType InetAddressType, nqaHistoryAddress InetAddress, nqaHistoryCompletionTime Integer32, nqaHistoryFinishState INTEGER, nqaHistoryLastRC Integer32 } nqaHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The history table index and times for dispatching dependency tests." ::= { nqaHistoryEntry 1 } nqaHistoryHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1." ::= { nqaHistoryEntry 2 } nqaHistoryProbeIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probe index of tests." ::= { nqaHistoryEntry 3 } nqaHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaHistoryEntry 4 } nqaHistoryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of history records." ::= { nqaHistoryEntry 5 } nqaHistoryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of tests. For Traceroute, it is the destination address of each hop. " ::= { nqaHistoryEntry 6 } nqaHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe." ::= { nqaHistoryEntry 7 } nqaHistoryFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a test operation made by a remote host for a particular probe." ::= { nqaHistoryEntry 8 } nqaHistoryLastRC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file." ::= { nqaHistoryEntry 9 } nqaMpingHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMpingHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations Mping test History Table for storing the results of a test operation." ::= { nqaHistory 2 } nqaMpingHistoryEntry OBJECT-TYPE SYNTAX NqaMpingHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingHistoryIndex, nqaMpingHistoryReceiverIndex, nqaMpingHistoryResponseIndex } ::= { nqaMpingHistoryTable 1 } NqaMpingHistoryEntry ::= SEQUENCE { nqaMpingHistoryIndex Integer32, nqaMpingHistoryReceiverIndex Integer32, nqaMpingHistoryResponseIndex Integer32, nqaMpingHistoryAddressType InetAddressType, nqaMpingHistoryAddress InetAddress, nqaMpingHistoryReceiverAddress InetAddress, nqaMpingHistoryTimeStamp DateAndTime, nqaMpingHistoryCompletionTime Integer32, nqaMpingHistoryFinishState INTEGER, nqaMpingHistoryLastRC Integer32, nqaMpingHistoryFibHit TruthValue } nqaMpingHistoryIndex OBJECT-TYPE SYNTAX Integer32(1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mping history table index and times for dispatching dependency tests." ::= { nqaMpingHistoryEntry 1 } nqaMpingHistoryReceiverIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of receiver ,that received mping request packets and response reply packets ." ::= { nqaMpingHistoryEntry 2 } nqaMpingHistoryResponseIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of response packets send by receiver" ::= { nqaMpingHistoryEntry 3 } nqaMpingHistoryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of history records." ::= { nqaMpingHistoryEntry 4 } nqaMpingHistoryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of tests. " ::= { nqaMpingHistoryEntry 5 } nqaMpingHistoryReceiverAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of response package of tests. " ::= { nqaMpingHistoryEntry 6 } nqaMpingHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaMpingHistoryEntry 7 } nqaMpingHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The completion time of a probe in milliseconds." ::= { nqaMpingHistoryEntry 8 } nqaMpingHistoryFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a test operation made by a remote host for a particular probe." ::= { nqaMpingHistoryEntry 9 } nqaMpingHistoryLastRC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last reply code received." ::= { nqaMpingHistoryEntry 10 } nqaMpingHistoryFibHit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the fib is hit on the device which received the packet." ::= { nqaMpingHistoryEntry 11 } nqaMtracertHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMtracertHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote MtracertOperations test History Table for storing the results of a test operation." ::= { nqaHistory 3 } nqaMtracertHistoryEntry OBJECT-TYPE SYNTAX NqaMtracertHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertHistoryIndex, nqaMtracertHistoryHopIndex } ::= { nqaMtracertHistoryTable 1 } NqaMtracertHistoryEntry ::= SEQUENCE { nqaMtracertHistoryIndex Integer32, nqaMtracertHistoryHopIndex Integer32, nqaMtracertHistoryAddressType InetAddressType, nqaMtracertHistoryAddress InetAddress, nqaMtracertHistoryTimeStamp DateAndTime, nqaMtracertHistoryCompletionTime Integer32, nqaMtracertHistoryLastRC Integer32, nqaMtracertHistoryCurQueryMode INTEGER, nqaMtracertHistoryQueryArrivalTime Unsigned32, nqaMtracertHistoryIncomingIfAddress InetAddress, nqaMtracertHistoryOutgoingIfAddress InetAddress, nqaMtracertHistoryPreHopRouterAddress InetAddress, nqaMtracertHistoryInputPacketCount Gauge32, nqaMtracertHistoryOutputPacketCount Gauge32, nqaMtracertHistoryTotalSGPacketCount Gauge32, nqaMtracertHistoryRtgProtocol INTEGER, nqaMtracertHistoryFwdTTL Gauge32, nqaMtracertHistoryFwdCode INTEGER, nqaMtracertHistroyFinishState INTEGER } nqaMtracertHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mtracert history table index and times for dispatching dependency tests." ::= { nqaMtracertHistoryEntry 1 } nqaMtracertHistoryHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Mtracert hop. " ::= { nqaMtracertHistoryEntry 2 } nqaMtracertHistoryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of history records." ::= { nqaMtracertHistoryEntry 3 } nqaMtracertHistoryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of tests. For Traceroute, it is the destination address of each hop. " ::= { nqaMtracertHistoryEntry 4 } nqaMtracertHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaMtracertHistoryEntry 5 } nqaMtracertHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe." ::= { nqaMtracertHistoryEntry 6 } nqaMtracertHistoryLastRC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file." ::= { nqaMtracertHistoryEntry 7 } nqaMtracertHistoryCurQueryMode OBJECT-TYPE SYNTAX INTEGER { maxHops (1) , hopByHop (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current query mode." ::= { nqaMtracertHistoryEntry 8 } nqaMtracertHistoryQueryArrivalTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Query Arrival Time is a 32-bit NTP timestamp specifying the arrival time of the traceroute request packet at this router." ::= { nqaMtracertHistoryEntry 9 } nqaMtracertHistoryIncomingIfAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This field specifies the address of the interface on which packets from this source and group are expected to arrive, or 0 if unknown." ::= { nqaMtracertHistoryEntry 10 } nqaMtracertHistoryOutgoingIfAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This field specifies the address of the interface on which packets from this source and group flow to the specified destination, or 0 if unknown." ::= { nqaMtracertHistoryEntry 11 } nqaMtracertHistoryPreHopRouterAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This field specifies the router from which this router expects packets from this source. " ::= { nqaMtracertHistoryEntry 12 } nqaMtracertHistoryInputPacketCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains the number of multicast packets received for all groups and sources on the incoming interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifInMulticastPkts from the IF-MIB for this interface." ::= { nqaMtracertHistoryEntry 13 } nqaMtracertHistoryOutputPacketCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the outgoing interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifOutMulti-castPkts from the IF-MIB for this interface." ::= { nqaMtracertHistoryEntry 14 } nqaMtracertHistoryTotalSGPacketCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field counts the number of packets from the specified source forwarded by this router to the specified group, or 0xffffffff if no count can be reported. This counter should have the same value as ipMRoutePkts from the IPMROUTE-STD-MIB for this forwarding entry." ::= { nqaMtracertHistoryEntry 15 } nqaMtracertHistoryRtgProtocol OBJECT-TYPE SYNTAX INTEGER { dvmrp(1), mospf(2), pim(3), cbt(4) , pimUsingSpecRteTab(5) , pimUsingStaticRte(6) , dvmrpUsingStaticRte(7), pimUsingMBGPRte(8) , cbtUsingSpecRteTab(9), cbtUsingStaticRte(10) , pimUsingState(11), unknownProtocol(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field describes the routing protocol in use between this router and the previous-hop router." ::= { nqaMtracertHistoryEntry 16 } nqaMtracertHistoryFwdTTL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains the TTL that a packet is required to have before it will be forwarded over the outgoing interface." ::= { nqaMtracertHistoryEntry 17 } nqaMtracertHistoryFwdCode OBJECT-TYPE SYNTAX INTEGER { noError(1), wrongIf(2), pruneSent(3), pruneRCVD(4), scoped(5), noRoute(6), wrongLastHop(7), notForwarding(8) , reachedRP(9) , noMulticast(11), infoHidden(12), noSpace(130), oldRouter(131) , adminProhib(132), unknownError(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains a forwarding information/error code. noError(1): No error wrongIf(2): Traceroute request arrived on an interface to which this router would not forward for this source,group,destination. pruneSent(3): This router has sent a prune upstream which applies to the source and group in the tracer- oute request. pruneRCVD(4): This router has stopped forwarding for this source and group in response to a request from the next hop router. scoped(5): The group is subject to administrative scoping at this hop. noRoute(6): This router has no route for the source or group and no way to determine a potential route. wrongLastHop(7): This router is not the proper last-hop router. notForwarding(8):This router is not forwarding this source,group out the outgoing interface for an unspecified reason. reachedRP(9): Reached Rendez-vous Point or Core rpfIf(10): Traceroute request arrived on the expected RPF interface for this source,group. noMulticast(11): Traceroute request arrived on an interface which is not enabled for multicast. infoHidden(12): One or more hops have been hidden from this trace. noSpace(13): There was not enough room to insert another response data block in the packet. oldRouter(14): The previous hop router does not understand traceroute requests. adminProhib(15): Traceroute is administratively prohibited. " ::= { nqaMtracertHistoryEntry 18 } nqaMtracertHistroyFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), busy(3), drop(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The finish state of a probe." ::= { nqaMtracertHistoryEntry 19 } nqaVplsMacTracertHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the VPLS mac trace Operations test History Table for storing the results of a test operation." ::= { nqaHistory 4 } nqaVplsMacTracertHistoryEntry OBJECT-TYPE SYNTAX NqaVplsMacTracertHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex } ::= { nqaVplsMacTracertHistoryTable 1 } NqaVplsMacTracertHistoryEntry ::= SEQUENCE { nqaVplsMacTracertHistoryIndex Integer32, nqaVplsMacTracertHistoryHopIndex Integer32, nqaVplsMacTracertHistoryResponseIndex Integer32, nqaVplsMacTracertHistoryTimeStamp DateAndTime, nqaVplsMacTracertHistoryAddressType InetAddressType, nqaVplsMacTracertHistoryAddress InetAddress, nqaVplsMacTracertHistoryCompletionTime Integer32, nqaVplsMacTracertHistoryFinishState INTEGER, nqaVplsMacTracertHistoryHitFlag TruthValue, nqaVplsMacTracertHistoryDSCount Integer32, nqaVplsMacTracertHistorySuccessPathNode TruthValue } nqaVplsMacTracertHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VPLS mac trace history table index and times for dispatching dependency tests." ::= { nqaVplsMacTracertHistoryEntry 1 } nqaVplsMacTracertHistoryHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of VPLS mac trace hop. " ::= { nqaVplsMacTracertHistoryEntry 2 } nqaVplsMacTracertHistoryResponseIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of VPLS mac trace reply packet per hop." ::= { nqaVplsMacTracertHistoryEntry 3 } nqaVplsMacTracertHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaVplsMacTracertHistoryEntry 4 } nqaVplsMacTracertHistoryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of history records." ::= { nqaVplsMacTracertHistoryEntry 5 } nqaVplsMacTracertHistoryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of tests. For Traceroute, it is the destination address of each hop. " ::= { nqaVplsMacTracertHistoryEntry 6 } nqaVplsMacTracertHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The completion time of a probe in milliseconds. The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe." ::= { nqaVplsMacTracertHistoryEntry 7 } nqaVplsMacTracertHistoryFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The finish state of a probe." ::= { nqaVplsMacTracertHistoryEntry 8 } nqaVplsMacTracertHistoryHitFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Hit Flag." ::= { nqaVplsMacTracertHistoryEntry 9 } nqaVplsMacTracertHistoryDSCount OBJECT-TYPE SYNTAX Integer32 (0..'7FFFFFFF'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Downstreams." ::= { nqaVplsMacTracertHistoryEntry 10 } nqaVplsMacTracertHistorySuccessPathNode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test." -- DEFVAL { false } ::= { nqaVplsMacTracertHistoryEntry 11 } nqaVplsMacTracertHistoryDSTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the VPLS mac trace Operations test History Downstreanm Table for storing the results of a test operation." ::= { nqaHistory 5 } nqaVplsMacTracertHistoryDSEntry OBJECT-TYPE SYNTAX NqaVplsMacTracertHistoryDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex, nqaVplsMacTracertHistoryDSIndex } ::= { nqaVplsMacTracertHistoryDSTable 1 } NqaVplsMacTracertHistoryDSEntry ::= SEQUENCE { nqaVplsMacTracertHistoryDSIndex Integer32, nqaVplsMacTracertHistoryDSAddress InetAddress } nqaVplsMacTracertHistoryDSIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VPLS mac trace history DS table index." ::= { nqaVplsMacTracertHistoryDSEntry 1 } nqaVplsMacTracertHistoryDSAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "DS address." ::= { nqaVplsMacTracertHistoryDSEntry 2 } nqaVplsMTraceHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaVplsMTraceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the remote vpls multicast trace operations test history table for storing the results of a test operation." ::= { nqaHistory 6 } nqaVplsMTraceHistoryEntry OBJECT-TYPE SYNTAX NqaVplsMTraceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMTraceHistoryIndex, nqaVplsMTraceHistoryHopIndex, nqaVplsMTraceHistoryResponseIndex } ::= { nqaVplsMTraceHistoryTable 1 } NqaVplsMTraceHistoryEntry ::= SEQUENCE { nqaVplsMTraceHistoryIndex Integer32, nqaVplsMTraceHistoryHopIndex Integer32, nqaVplsMTraceHistoryResponseIndex Integer32, nqaVplsMTraceHistoryResponserAddressType InetAddressType, nqaVplsMTraceHistoryResponserAddress InetAddress, nqaVplsMTraceHistoryUpStreamAddressType InetAddressType, nqaVplsMTraceHistoryUpStreamAddress InetAddress, nqaVplsMTraceHistoryReceivedTtl Unsigned32, nqaVplsMTraceHistoryIGMPVersion INTEGER, nqaVplsMTraceHistoryIGMPSnpgEnable EnableValue, nqaVplsMTraceHistoryIGMPProxyEnable EnableValue, nqaVplsMTraceHistoryIGMPRouterPortLearningEnable EnableValue, nqaVplsMTraceHistoryRequireRouterAlertEnable EnableValue, nqaVplsMTraceHistoryForwardMode INTEGER, nqaVplsMTraceHistoryHitFlag TruthValue, nqaVplsMTraceHistoryPWExist TruthValue, nqaVplsMTraceHistoryGroupPolicy INTEGER, nqaVplsMTraceHistoryCACExist INTEGER, nqaVplsMTraceHistoryRcvQueryCount Gauge32, nqaVplsMTraceHistoryRcvReportCount Gauge32, nqaVplsMTraceHistoryRcvLeaveCount Gauge32, nqaVplsMTraceHistoryTimeStamp DateAndTime, nqaVplsMTraceHistoryCompletionTime Integer32, nqaVplsMTraceHistoryLastRC Integer32, nqaVplsMTraceHistoryLastRSC Integer32, nqaVplsMTraceHistoryFinishState INTEGER, nqaVplsMTraceHistorySuccessPathNode INTEGER } nqaVplsMTraceHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vpls multicast trace history table index and times for dispatching dependency tests." ::= { nqaVplsMTraceHistoryEntry 1 } nqaVplsMTraceHistoryHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of vpls multicast trace hop. " ::= { nqaVplsMTraceHistoryEntry 2 } nqaVplsMTraceHistoryResponseIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of vpls multicast trace responser. " ::= { nqaVplsMTraceHistoryEntry 3 } nqaVplsMTraceHistoryResponserAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of history record's Responser address." ::= { nqaVplsMTraceHistoryEntry 4 } nqaVplsMTraceHistoryResponserAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Responser address of tests." ::= { nqaVplsMTraceHistoryEntry 5 } nqaVplsMTraceHistoryUpStreamAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of history records' last hop address." ::= { nqaVplsMTraceHistoryEntry 6 } nqaVplsMTraceHistoryUpStreamAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The last hop address of tests." ::= { nqaVplsMTraceHistoryEntry 7 } nqaVplsMTraceHistoryReceivedTtl OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "time-to-live value" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ttl in the received packet." ::= { nqaVplsMTraceHistoryEntry 8 } nqaVplsMTraceHistoryIGMPVersion OBJECT-TYPE SYNTAX INTEGER { igmpv1(1), igmpv2(2), igmpv3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP protocol version." ::= { nqaVplsMTraceHistoryEntry 9 } nqaVplsMTraceHistoryIGMPSnpgEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP snooping enable state." ::= { nqaVplsMTraceHistoryEntry 10 } nqaVplsMTraceHistoryIGMPProxyEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP proxy enable switch." ::= { nqaVplsMTraceHistoryEntry 11 } nqaVplsMTraceHistoryIGMPRouterPortLearningEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP router port learning enable switch." ::= { nqaVplsMTraceHistoryEntry 12 } nqaVplsMTraceHistoryRequireRouterAlertEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The route alert requirement enable switch." ::= { nqaVplsMTraceHistoryEntry 13 } nqaVplsMTraceHistoryForwardMode OBJECT-TYPE SYNTAX INTEGER { mac(1), ip(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The forward mode value." ::= { nqaVplsMTraceHistoryEntry 14 } nqaVplsMTraceHistoryHitFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the fib is hit on the device which received the packet." ::= { nqaVplsMTraceHistoryEntry 15 } nqaVplsMTraceHistoryPWExist OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the forward PW is exist." ::= { nqaVplsMTraceHistoryEntry 16 } nqaVplsMTraceHistoryGroupPolicy OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ACL judge result." ::= { nqaVplsMTraceHistoryEntry 17 } nqaVplsMTraceHistoryCACExist OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the connection admission control comfiguration of current VSI is exist." ::= { nqaVplsMTraceHistoryEntry 18 } nqaVplsMTraceHistoryRcvQueryCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received query packet number for current IGMP version of current VSI." ::= { nqaVplsMTraceHistoryEntry 19 } nqaVplsMTraceHistoryRcvReportCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received report packet number for current IGMP version of current VSI." ::= { nqaVplsMTraceHistoryEntry 20 } nqaVplsMTraceHistoryRcvLeaveCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received leave packet number for current IGMP version of current VSI." ::= { nqaVplsMTraceHistoryEntry 21 } nqaVplsMTraceHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaVplsMTraceHistoryEntry 22 } nqaVplsMTraceHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe." ::= { nqaVplsMTraceHistoryEntry 23 } nqaVplsMTraceHistoryLastRC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last implementation method specific reply code received." ::= { nqaVplsMTraceHistoryEntry 24 } nqaVplsMTraceHistoryLastRSC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last implementation method specific reply sub code received." ::= { nqaVplsMTraceHistoryEntry 25 } nqaVplsMTraceHistoryFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The finish state of a probe." ::= { nqaVplsMTraceHistoryEntry 26 } nqaVplsMTraceHistorySuccessPathNode OBJECT-TYPE SYNTAX INTEGER { onPath(1), notonPath(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the response router is on the path of a probe. The default value is notonPath(2)." -- DEFVAL { 2 } ::= { nqaVplsMTraceHistoryEntry 27 } nqaMacTraceHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMacTraceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines a list of historical MAC trace test instances for storing the running results of test instances." ::= { nqaHistory 7 } nqaMacTraceHistoryEntry OBJECT-TYPE SYNTAX NqaMacTraceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines a table for storing the running results of test instances. The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax. " INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMacTraceHistoryIndex, nqaMacTraceHistoryReceiveOrder } ::= { nqaMacTraceHistoryTable 1 } NqaMacTraceHistoryEntry ::= SEQUENCE { nqaMacTraceHistoryIndex Integer32, nqaMacTraceHistoryReceiveOrder Integer32, nqaMacTraceHistoryTTL Integer32, nqaMacTraceHistorySeqNumber Unsigned32, nqaMacTraceHistoryCompletionTime Integer32, nqaMacTraceHistoryForwarded TruthValue, nqaMacTraceHistoryTerminalMep TruthValue, nqaMacTraceHistoryRelayAction HWDot1agCfmRelayActionFieldValue, nqaMacTraceHistoryIngressAction HWDot1agCfmIngressActionFieldValue, nqaMacTraceHistoryIngressMac MacAddress, nqaMacTraceHistoryIngressIfName OCTET STRING, nqaMacTraceHistoryEgressAction HWDot1agCfmEgressActionFieldValue, nqaMacTraceHistoryEgressMac MacAddress, nqaMacTraceHistoryEgressIfName OCTET STRING } nqaMacTraceHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests." ::= { nqaMacTraceHistoryEntry 1 } nqaMacTraceHistoryReceiveOrder OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the sequence in which LTRs are received." ::= { nqaMacTraceHistoryEntry 2 } nqaMacTraceHistoryTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the TTL of the LTR." ::= { nqaMacTraceHistoryEntry 3 } nqaMacTraceHistorySeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the sequence number of the LTR." REFERENCE "802.1ag clause 12.14.7.5" ::= { nqaMacTraceHistoryEntry 4 } nqaMacTraceHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the RTT (ms) of the response packet." ::= { nqaMacTraceHistoryEntry 5 } nqaMacTraceHistoryForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the device that sends LTRs continues to forward LTMs." ::= { nqaMacTraceHistoryEntry 6 } nqaMacTraceHistoryTerminalMep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the LTR is sent by an MEP." ::= { nqaMacTraceHistoryEntry 7 } nqaMacTraceHistoryRelayAction OBJECT-TYPE SYNTAX HWDot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the Relay Action field in the LTR." ::= { nqaMacTraceHistoryEntry 8 } nqaMacTraceHistoryIngressAction OBJECT-TYPE SYNTAX HWDot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the Ingress Action field in the LTR." ::= { nqaMacTraceHistoryEntry 9 } nqaMacTraceHistoryIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the physical MAC address carried in the ingress MAC address field in the LTR." ::= { nqaMacTraceHistoryEntry 10 } nqaMacTraceHistoryIngressIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the inbound interface of the LTR." ::= { nqaMacTraceHistoryEntry 11 } nqaMacTraceHistoryEgressAction OBJECT-TYPE SYNTAX HWDot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the Egress Action field in the LTR." ::= { nqaMacTraceHistoryEntry 12 } nqaMacTraceHistoryEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the MAC address in the Egress MAC address field of the LTR." ::= { nqaMacTraceHistoryEntry 13 } nqaMacTraceHistoryEgressIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the interface that forwards the LTR." ::= { nqaMacTraceHistoryEntry 14 } nqaMultiPathHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaMultiPathHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations test History Table for storing the results of a test operation." ::= { nqaHistory 8 } nqaMultiPathHistoryEntry OBJECT-TYPE SYNTAX NqaMultiPathHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMultiPathHistoryIndex, nqaMultiPathHistoryPathIndex, nqaMultiPathHistoryHopIndex, nqaMultiPathHistoryProbeIndex } ::= { nqaMultiPathHistoryTable 1 } NqaMultiPathHistoryEntry ::= SEQUENCE { nqaMultiPathHistoryIndex Integer32, nqaMultiPathHistoryPathIndex Integer32, nqaMultiPathHistoryHopIndex Integer32, nqaMultiPathHistoryProbeIndex Integer32, nqaMultiPathHistoryTimeStamp DateAndTime, nqaMultiPathHistoryAddressType InetAddressType, nqaMultiPathHistoryAddress InetAddress, nqaMultiPathHistoryCompletionTime Integer32, nqaMultiPathHistoryFinishState INTEGER, nqaMultiPathHistoryLastRC Integer32 } nqaMultiPathHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The history table index and times for dispatching dependency tests." ::= { nqaMultiPathHistoryEntry 1 } nqaMultiPathHistoryPathIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The path index." ::= { nqaMultiPathHistoryEntry 2 } nqaMultiPathHistoryHopIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1." ::= { nqaMultiPathHistoryEntry 3 } nqaMultiPathHistoryProbeIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probe index of tests." ::= { nqaMultiPathHistoryEntry 4 } nqaMultiPathHistoryTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time stamp of a probe." ::= { nqaMultiPathHistoryEntry 5 } nqaMultiPathHistoryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of history records." ::= { nqaMultiPathHistoryEntry 6 } nqaMultiPathHistoryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address of tests. For Traceroute, it is the destination address of each hop. " ::= { nqaMultiPathHistoryEntry 7 } nqaMultiPathHistoryCompletionTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe." ::= { nqaMultiPathHistoryEntry 8 } nqaMultiPathHistoryFinishState OBJECT-TYPE SYNTAX INTEGER { success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a test operation made by a remote host for a particular probe." ::= { nqaMultiPathHistoryEntry 9 } nqaMultiPathHistoryLastRC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last implementation method specific reply code received." ::= { nqaMultiPathHistoryEntry 10 } nqaNotifications OBJECT IDENTIFIER ::= { nqa 6} nqaResultsProbeFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaResultsAddressType, nqaResultsAddress, nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsSumCompletionTime, nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High, nqaResultsLastGoodProbe, nqaResultsLastGoodPath } STATUS current DESCRIPTION "Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated. (except for HTTP or Jitter or FTP)" ::= { nqaNotifications 1 } nqaResultsTestFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaResultsAddressType, nqaResultsAddress, nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsSumCompletionTime, nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High, nqaResultsLastGoodProbe, nqaResultsLastGoodPath } STATUS current DESCRIPTION "Generated when a nqa test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed. (Except for HTTP or Jitter or FTP)" ::= { nqaNotifications 2 } nqaResultsTestCompleted NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaResultsAddressType, nqaResultsAddress, nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsSumCompletionTime, nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High, nqaResultsLastGoodProbe, nqaResultsLastGoodPath } STATUS current DESCRIPTION "Generated at the completion of a nqa test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2).(except for HTTP or Jitter or FTP)" ::= { nqaNotifications 3 } nqaResultsThresholdNotification NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaResultsAddressType, nqaResultsAddress, nqaAdminCtrlThreshold1, nqaResultsCompletionTimeMax, nqaResultsRTDOverThresholds } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information.(except for HTTP or Jitter or FTP)" ::= { nqaNotifications 4 } nqaHTTPStatsProbeFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaHTTPStatsDNSRTTSum, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsTcpConnErrors, nqaHTTPStatsErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes } STATUS current DESCRIPTION "Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for HTTP)" ::= { nqaNotifications 5 } nqaHTTPStatsTestFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaHTTPStatsDNSRTTSum, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsTcpConnErrors, nqaHTTPStatsErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes } STATUS current DESCRIPTION "Generated when a HTTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for HTTP)" ::= { nqaNotifications 6 } nqaHTTPStatsTestCompleted NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaHTTPStatsDNSRTTSum, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsTcpConnErrors, nqaHTTPStatsErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes } STATUS current DESCRIPTION "Generated at the completion of a HTTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2)." ::= { nqaNotifications 7 } nqaHTTPStatsThresholdNotification NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlThreshold1, nqaAdminCtrlThreshold2, nqaAdminCtrlThreshold3, nqaHTTPStatsDNSRTTMax, nqaHTTPStatsTCPConnectRTTMax, nqaHTTPStatsTransactionRTTMax, nqaHTTPStatsRTDOverThresholds } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2 or nqaAdminCtrlThreshold3, the system sends trap information.(Only for HTTP)" ::= { nqaNotifications 8 } nqaJitterStatsProbeFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low, nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsPacketOutOfSequences, nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsDrops, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsJitterOut, nqaJitterStatsJitterIn, nqaJitterStatsOWSumSD, nqaJitterStatsOWSumDS } STATUS current DESCRIPTION "Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for Jitter)" ::= { nqaNotifications 9 } nqaJitterStatsTestFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low, nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsPacketOutOfSequences, nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsDrops, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsJitterOut, nqaJitterStatsJitterIn, nqaJitterStatsOWSumSD, nqaJitterStatsOWSumDS } STATUS current DESCRIPTION "Generated when a Jitter test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)" ::= { nqaNotifications 10 } nqaJitterStatsTestCompleted NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low, nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsPacketOutOfSequences, nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsDrops, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsJitterOut, nqaJitterStatsJitterIn, nqaJitterStatsOWSumSD, nqaJitterStatsOWSumDS } STATUS current DESCRIPTION "Generated at the completion of a Jitter test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)" ::= { nqaNotifications 11 } nqaFTPStatsProbeFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsDataConnMaxTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes } STATUS current DESCRIPTION "Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for FTP)" ::= { nqaNotifications 12 } nqaFTPStatsTestFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsDataConnMaxTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes } STATUS current DESCRIPTION "Generated when a FTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for FTP)" ::= { nqaNotifications 13 } nqaFTPStatsTestCompleted NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaScheduleOperStatus, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsDataConnMaxTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes } STATUS current DESCRIPTION "Generated at the completion of a FTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for FTP)" ::= { nqaNotifications 14 } nqaFTPStatsThresholdNotification NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlThreshold1, nqaAdminCtrlThreshold2, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsDataConnMaxTime, nqaFTPStatsRTDOverThresholds } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2, the system sends trap information.(Only for FTP)" ::= { nqaNotifications 15 } nqaJitterStatsRTDThresholdNotification NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlThreshold1, nqaJitterStatsRTTMax, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsRTDOverThresholds } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)" ::= { nqaNotifications 16 } nqaJitterStatsOWDThresholdNotificationSD NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlThreshold2, nqaJitterStatsRTTMax, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsOWDOverThresholdsSD } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold2 the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing)" ::= { nqaNotifications 17 } nqaJitterStatsOWDThresholdNotificationDS NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlThreshold3, nqaJitterStatsRTTMax, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsOWDOverThresholdsDS } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlThreshold3 the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing)" ::= { nqaNotifications 18 } nqaNegotiateFailed NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminParaTargetPort, nqaAdminParaVrfName } STATUS current DESCRIPTION "If negotiation between client and server failed,the system sends trap information." ::= { nqaNotifications 19 } nqaRisingAlarmNotification NOTIFICATION-TYPE OBJECTS { nqaAlarmVariable, nqaAlarmSampleType, nqaAlarmValue, nqaAlarmRisingThreshold, nqaAlarmDescription } STATUS current DESCRIPTION "Sending trap messages when the value of the monitored object exceeds nqaAlarmUpperThreshold." ::= { nqaNotifications 20} nqaFallingAlarmNotification NOTIFICATION-TYPE OBJECTS { nqaAlarmVariable, nqaAlarmSampleType, nqaAlarmValue, nqaAlarmFallingThreshold, nqaAlarmDescription } STATUS current DESCRIPTION "Sending trap messages when the value of the monitored object is under nqaAlarmLowerThreshold." ::= { nqaNotifications 21} nqaFtpSaveRecordNotification NOTIFICATION-TYPE OBJECTS { nqaFtpSaveRecordLastFileName } STATUS current DESCRIPTION "Sending trap messages when saving a test result to the FTP server is completed." ::= { nqaNotifications 22 } nqaPppoeStatsTestFailed NOTIFICATION-TYPE OBJECTS { nqaPppoeStatsCompletions, nqaPppoeStatsCurrentPhase, nqaPppoeStatsErrorMessage, nqaPppoeDiscoveryTimeout, nqaPppoeLcpTimeout, nqaPppoeAuthorizationTimeout, nqaPppoeNcpTimeout, nqaPppoeConnectionTime, nqaPppoeClientSessionId, nqaPppoeClientIpAddress, nqaPppoeGatewayIpAddress } STATUS current DESCRIPTION "Generated when a PPPoE test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). (Only for PPPoE))" ::= { nqaNotifications 23 } nqaPppoeStatsTestCompleted NOTIFICATION-TYPE OBJECTS { nqaPppoeStatsCompletions, nqaPppoeStatsCurrentPhase, nqaPppoeStatsErrorMessage, nqaPppoeDiscoveryTimeout, nqaPppoeLcpTimeout, nqaPppoeAuthorizationTimeout, nqaPppoeNcpTimeout, nqaPppoeConnectionTime, nqaPppoeClientSessionId, nqaPppoeClientIpAddress, nqaPppoeGatewayIpAddress } STATUS current DESCRIPTION "Generated at the completion of a PPPoE test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for PPPoE)" ::= { nqaNotifications 24 } nqaJitterStatsJitterThresholdNotificationSD NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlJitterThresholdSD, nqaJitterStatsRTTMax, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsJitterOverThresholdsSD } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdSD the system sends trap information. (Only for jitter)" ::= { nqaNotifications 25 } nqaJitterStatsJitterThresholdNotificationDS NOTIFICATION-TYPE OBJECTS { nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminCtrlJitterThresholdDS, nqaJitterStatsRTTMax, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsJitterOverThresholdsDS } STATUS current DESCRIPTION "If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdDS the system sends trap information. (Only for jitter)" ::= { nqaNotifications 26 } nqaReflectorStateChangeNotification NOTIFICATION-TYPE OBJECTS { nqaReflectorID, nqaReflectorState } STATUS current DESCRIPTION "If the status of the reflector changes, the system sends trap information (only for the reflector)." ::= { nqaNotifications 27 } nqaResultsTestResultChange NOTIFICATION-TYPE OBJECTS { nqaResultsCompletions, nqaResultsCompletions } STATUS current DESCRIPTION "If the test result changes, the system sends trap information. " ::= { nqaNotifications 28 } nqaResultsTestResultChangePackedNotification NOTIFICATION-TYPE OBJECTS { nqaResultChangeRecord } STATUS current DESCRIPTION "If the test result changes, the system sends packed trap information. No more than two traps will be sent in one second and each trap contains at most ten records." ::= { nqaNotifications 29 } nqaResultsTestResultStatusChange NOTIFICATION-TYPE OBJECTS { nqaResultsTestType, nqaResultsSourceIP, nqaResultsSourceIfName, nqaResultsDestinationIP, nqaResultsLastCompletions, nqaResultsCompletions, nqaResultsChangeToFailureTimes, nqaResultsChangeToSuccessTimes, nqaResultsChangeToNoResultTimes, nqaResultsChangeToNegotiationFailureTimes, nqaResultsChangeToAbnormalTimes, nqaResultsFailureTimes, nqaResultsSuccessTimes, nqaResultsNoResultTimes, nqaResultsNegotiationFailureTimes, nqaResultsAbnormalTimes } STATUS current DESCRIPTION "If the test result changes, the system sends trap information. " ::= { nqaNotifications 30 } nqaResultsDetail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates detailed result information about the test instance." ::= { nqaResultsEntry 30 } nqaConformance OBJECT IDENTIFIER ::= { nqa 7 } nqaGroups OBJECT IDENTIFIER ::= { nqaConformance 1 } nqaBaseGroup OBJECT-GROUP OBJECTS { nqaVersion, nqaReset, nqaTimeOfLastSetError, nqaLastSetError, nqaEnable, nqaNumOfCurrentCtrlEntry, nqaMaxConcurrentRequests, nqaMaxNumOfRequests, nqaJitterVersion,nqaSupportTestType,nqaSupportServerType} STATUS current DESCRIPTION "Description." ::= { nqaGroups 1 } nqaAdminGroup OBJECT-GROUP OBJECTS {nqaAdminCtrlTag, nqaAdminCtrlType, nqaAdminCtrlFrequency, nqaAdminCtrlTimeOut, nqaAdminCtrlThreshold1, nqaAdminCtrlThreshold2,nqaAdminCtrlThreshold3,nqaAdminCtrlStatus, nqaAdminCtrlJitterThresholdSD, nqaAdminCtrlJitterThresholdDS, nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress, nqaAdminParaTargetPort, nqaAdminParaSourceAddressType, nqaAdminParaSourceAddress, nqaAdminParaSourcePort, nqaAdminParaMaxTtl, nqaAdminParaInitialTtl, nqaAdminParaStorageType, nqaAdminParaMaxFailures, nqaAdminParaDontFragment, nqaAdminParaDataSize, nqaAdminParaDataFill, nqaAdminParaIfIndex, nqaAdminParaByPassRouteTable, nqaAdminParaMiscOptions, nqaAdminParaProbeCount, nqaAdminParaTrapGeneration, nqaAdminParaTrapProbeFailureFilter, nqaAdminParaTrapTestFailureFilter, nqaAdminParaDSField, nqaAdminParaDnsServerAddressType, nqaAdminParaDnsServerAddress, nqaAdminParaOperation, nqaAdminParaHttpVersion, nqaAdminParaHttpOperationString, nqaAdminParaTestFailurePercent, nqaAdminParaFtpUserName, nqaAdminParaFtpPassword, nqaAdminParaFtpFilePath, nqaAdminParaFtpFileSize,nqaAdminParaInterval, nqaAdminParaNumPackets, nqaAdminParaVrfName, nqaAdminParaLspAddressType, nqaAdminParaLspAddressMask, nqaAdminParaLspIpAddress, nqaAdminParaLspPWE3VcId, nqaAdminParaLspPWE3Type, nqaAdminParaLspPWE3Option, nqaAdminParaLspPWE3RemoteVcId, nqaAdminParaLspPWE3RemoteAddress, nqaAdminParaLspExp, nqaAdminParaLspReplyMode, nqaAdminParaResultRowMax, nqaAdminParaHistoryRowMax, nqaAdminParaCreateHopsEntries, nqaAdminParaLspVCType, nqaAdminParaMTraceLastHopAddress,nqaAdminParaMTraceSourceAddress,nqaAdminParaMTraceGroupAddress,nqaAdminParaMTraceMaxTtl, nqaAdminParaMTraceSendMode,nqaAdminParaMTraceResponseTtl,nqaAdminParaMTraceResponseAddressType,nqaAdminParaMTraceResponseAddress, nqaAdminParaDistanceNodeType, nqaAdminParaMacAddress, nqaAdminParaRMepID, nqaAdminParaMDName, nqaAdminParaMAName, nqaAdminParaMacTunnelName, nqaAdminParaCodecType, nqaAdminParaIcpifAdvFactor, nqaAdminParaFtpMode, nqaAdminParaNextHopAddressType, nqaAdminParaNextHopAddress,nqaAdminParaForwardingSimulationInboundIfIndex, nqaAdminParaMeasure, nqaAdminParaEthPriority, nqaAdminParaMinRate, nqaAdminParaMaxRate, nqaAdminParaCevid, nqaAdminParaPevid,nqaAdminParaPrecision,nqaAdminParaSnmpCommunityRead, nqaAdminParaDatasizeList, nqaAdminParaFailRatioPrecision,nqaAdminParaFailRatioValue,nqaAdminGeneralflowTestBehavior,nqaAdminParaFrameRate,nqaAdminGeneralflowDiscardNonTestPriority, nqaAdminParaSourceMacAddress, nqaAdminParaCeEthType, nqaAdminParaPeEthType, nqaAdminParaDirection, nqaAdminParaLspVpnFrrPathType, nqaAdminParaSoftwareBased, nqaAdminParaLspPathType, nqaAdminParaPathType,nqaAdminParaEthPriorityStatus, nqaScheduleStartType, nqaScheduleStartTime, nqaScheduleEndType, nqaScheduleEndTime,nqaScheduleAgeTime, nqaScheduleNumOfInitiations, nqaAdminParaIcmpJitterMode, nqaAdminParaPathMtuDiscoveryPathMtuMax, nqaAdminParaPathMtuStep, nqaScheduleOperStatus, nqaScheduleElapsedTime,nqaScheduleLastFinishIndex,nqaScheduleLastCollectIndex,nqaGroupStatusType,nqaGroupPeriod, nqaGroupLeaderOwnerIndex,nqaGroupLeaderTestName,nqaGroupMemberNum,nqaGroupMemberFree,nqaAdminParaHardwareBased,nqaAdminParaPppoeUserName, nqaAdminParaPppoePassword,nqaAdminParaPppoeVlanIf,nqaAdminParaPppoeAuthenticationMode,nqaAdminParaPppoeRedialUpTimes,nqaAdminParaPppoeInterval,nqaAdminParaVsiName, nqaAdminParaVlanId,nqaAdminParaLspTunnelType,nqaAdminParaLspNextHopAddress,nqaAdminParaLspVersion,nqaAdminParaRemoteAddressType,nqaAdminParaRemoteAddress,nqaAdminParaTimeUnit,nqaAdminParaFragment,nqaAdminParaRmoteFecType,nqaAdminParaRmoteFecMask,nqaAdminParaRmoteFecIpAddress, nqaAdminParaSrPolicyName,nqaAdminParaSrPolicyEndPointAddrType ,nqaAdminParaSrPolicyEndPointIpAddress,nqaAdminParaSrPolicyEndPointColor,nqaAdminParaSrPolicyBindingSid,nqaAdminParaDscp,nqaAdminParaFlexAlgoId, nqaAdminExtPara1,nqaAdminExtPara2,nqaAdminExtPara3,nqaAdminExtPara4,nqaAdminExtPara5,nqaAdminExtPara6,nqaAdminExtPara7,nqaAdminExtPara8,nqaAdminExtPara9,nqaAdminExtPara10, nqaAdminExtPara11,nqaAdminExtPara12,nqaAdminExtPara13,nqaAdminExtPara14,nqaAdminExtPara15,nqaAdminExtPara16,nqaAdminExtPara17,nqaAdminExtPara18,nqaAdminExtPara19,nqaAdminExtPara20, nqaAdminExtPara21,nqaAdminExtPara22,nqaAdminExtPara23,nqaAdminExtPara24,nqaAdminExtPara25,nqaAdminExtPara26,nqaAdminExtPara27,nqaAdminExtPara28,nqaAdminExtPara29,nqaAdminExtPara30, nqaAdminExtPara31,nqaAdminExtPara32,nqaAdminExtPara33,nqaAdminExtPara34,nqaAdminExtPara35,nqaAdminExtPara36,nqaAdminExtPara37,nqaAdminExtPara38,nqaAdminExtPara39,nqaAdminExtPara40, nqaAdminExtPara41,nqaAdminExtPara42,nqaAdminExtPara43,nqaAdminExtPara44,nqaAdminExtPara45,nqaAdminExtPara46,nqaAdminExtPara47,nqaAdminExtPara48,nqaAdminExtPara49,nqaAdminExtPara50 } STATUS current DESCRIPTION "Description." ::= { nqaGroups 2 } nqaServerGroup OBJECT-GROUP OBJECTS { nqaTcpServerAddressType, nqaTcpServerStatus, nqaUdpServerAddressType, nqaUdpServerStatus, nqaIcmpServerAddressType, nqaIcmpServerStatus, nqaServerEnable } STATUS current DESCRIPTION "Description." ::= { nqaGroups 3 } nqaStatsGroup OBJECT-GROUP OBJECTS { nqaResultsCompletions, nqaResultsTestAttempts, nqaResultsCurHopCount, nqaResultsCurProbeCount, nqaResultsRTDOverThresholds, nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsDisconnects, nqaResultsTimeouts, nqaResultsBusies, nqaResultsNoConnections, nqaResultsSequenceErrors, nqaResultsDrops, nqaResultsAddressType, nqaResultsAddress, nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsLastGoodProbe, nqaResultsLastGoodPath, nqaResultsTestFinished, nqaHTTPStatsCompletions, nqaHTTPStatsRTDOverThresholds, nqaHTTPStatsRTTSum, nqaHTTPStatsRTTMin, nqaHTTPStatsRTTMax, nqaHTTPStatsDNSRTTSum, nqaHTTPStatsDNSRTTMin, nqaHTTPStatsDNSRTTMax, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTCPConnectRTTMin, nqaHTTPStatsTCPConnectRTTMax, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsTransactionRTTMin, nqaHTTPStatsTransactionRTTMax, nqaHTTPStatsMessageBodyOctetsSum, nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsErrors, nqaHTTPStatsTcpConnErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes, nqaHTTPStatsBusies, nqaHTTPStatsTestFinished, nqaJitterStatsCompletions, nqaJitterStatsRTDOverThresholds, nqaJitterStatsNumOfRTT, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low, nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsMinOfPositivesSD, nqaJitterStatsMaxOfPositivesSD, nqaJitterStatsNumOfPositivesSD, nqaJitterStatsSumOfPositivesSD, nqaJitterStatsSum2OfPositivesSDLow, nqaJitterStatsSum2OfPositivesSDHigh, nqaJitterStatsMinOfNegativesSD, nqaJitterStatsMaxOfNegativesSD, nqaJitterStatsNumOfNegativesSD, nqaJitterStatsSumOfNegativesSD, nqaJitterStatsSum2OfNegativesSDLow, nqaJitterStatsSum2OfNegativesSDHigh, nqaJitterStatsMinOfPositivesDS, nqaJitterStatsMaxOfPositivesDS, nqaJitterStatsNumOfPositivesDS, nqaJitterStatsSumOfPositivesDS, nqaJitterStatsSum2OfPositivesDSLow, nqaJitterStatsSum2OfPositivesDSHigh, nqaJitterStatsMinOfNegativesDS, nqaJitterStatsMaxOfNegativesDS, nqaJitterStatsNumOfNegativesDS, nqaJitterStatsSumOfNegativesDS, nqaJitterStatsSum2OfNegativesDSLow, nqaJitterStatsSum2OfNegativesDSHigh, nqaJitterStatsPacketLossSD, nqaJitterStatsPacketLossDS, nqaJitterStatsPacketOutOfSequences, nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes, nqaJitterStatsDrops, nqaJitterStatsTestFinished, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsRTTAvg, nqaJitterStatsPacketLossRatio, nqaJitterStatsAvgJitter, nqaJitterStatsAvgJitterSD, nqaJitterStatsAvgJitterDS, nqaJitterStatsJitterOut, nqaJitterStatsJitterIn, nqaJitterStatsOWDOverThresholdsSD, nqaJitterStatsOWDOverThresholdsDS, nqaJitterStatsPktLossUnknown, nqaJitterStatsNumOfOWD, nqaJitterStatsOWSumSD, nqaPathJitterStatsCompletions, nqaPathJitterStatsAddressType, nqaPathJitterStatsAddress, nqaPathJitterStatsRtdOverThresholds, nqaPathJitterStatsNumOfRtt, nqaPathJitterStatsRttSum, nqaJitterStatsOperOfIcpif, nqaJitterStatsOperOfMos, nqaJitterStatsMinDelaySD, nqaJitterStatsSum2DelaySDLow, nqaJitterStatsSum2DelaySDHigh, nqaJitterStatsMinDelayDS, nqaJitterStatsSum2DelayDSLow, nqaJitterStatsSum2DelayDSHigh,nqaJitterStatsTimeUnit,nqaJitterStatsAvgDelaySD,nqaJitterStatsAvgDelayDS, nqaJitterStatsPktRewriteNum, nqaJitterStatsPktRewriteRatio, nqaJitterStatsPktDisorderNum, nqaJitterStatsPktDisorderRatio, nqaJitterStatsFragPktDisorderNum, nqaJitterStatsFragPktDisorderRatio, nqaJitterStatsJitterOverThresholdsSD, nqaJitterStatsJitterOverThresholdsDS, nqaJitterStatsOverallOverThresholds, nqaJitterStatsStartTime, nqaJitterStatsEndTime, nqaJitterStatsResultDetail, nqaPathJitterStatsRttSum2Low, nqaPathJitterStatsRttSum2High, nqaPathJitterStatsRttMin, nqaPathJitterStatsRttMax, nqaPathJitterStatsMinOfPositivesSD, nqaPathJitterStatsMaxOfPositivesSD, nqaPathJitterStatsNumOfPositivesSD, nqaPathJitterStatsSumOfPositivesSD, nqaPathJitterStatsSum2OfPositivesSDLow, nqaPathJitterStatsSum2OfPositivesSDHigh, nqaPathJitterStatsMinOfNegativesSD, nqaPathJitterStatsMaxOfNegativesSD, nqaPathJitterStatsNumOfNegativesSD, nqaPathJitterStatsSumOfNegativesSD, nqaPathJitterStatsSum2OfNegativesSDLow, nqaPathJitterStatsSum2OfNegativesSDHigh, nqaPathJitterStatsMinOfPositivesDS, nqaPathJitterStatsMaxOfPositivesDS, nqaPathJitterStatsNumOfPositivesDS, nqaPathJitterStatsSumOfPositivesDS, nqaPathJitterStatsSum2OfPositivesDSLow, nqaPathJitterStatsSum2OfPositivesDSHigh, nqaPathJitterStatsMinOfNegativesDS, nqaPathJitterStatsMaxOfNegativesDS, nqaPathJitterStatsNumOfNegativesDS, nqaPathJitterStatsSumOfNegativesDS, nqaPathJitterStatsSum2OfNegativesDSLow, nqaPathJitterStatsSum2OfNegativesDSHigh, nqaPathJitterStatsPacketLossSD, nqaPathJitterStatsPacketLossDS, nqaPathJitterStatsPacketOutOfSequences, nqaPathJitterStatsErrors, nqaPathJitterStatsBusies, nqaPathJitterStatsTimeouts, nqaPathJitterStatsProbeResponses, nqaPathJitterStatsSentProbes, nqaPathJitterStatsDrops, nqaPathJitterStatsTestFinished, nqaPathJitterStatsMaxDelaySD, nqaPathJitterStatsMaxDelayDS, nqaPathJitterStatsRttAvg, nqaPathJitterStatsPacketLossRatio, nqaPathJitterStatsAvgJitter, nqaPathJitterStatsAvgJitterSD, nqaPathJitterStatsAvgJitterDS, nqaPathJitterStatsJitterOut, nqaPathJitterStatsJitterIn, nqaPathJitterStatsOwdOverThresholdsSD, nqaPathJitterStatsPktLossUnknown, nqaPathJitterStatsNumOfOwd, nqaPathJitterStatsOwdSumSD, nqaPathJitterStatsOwdSumDS, nqaPathJitterStatsOwdOverThresholdsDS, nqaPathMtuStatsAddressType, nqaPathMtuStatsAddress, nqaPathMtuStatsCompletions, nqaPathMtuStatsSentProbes, nqaPathMtuStatsDiscoveryPathMtuMin, nqaPathMtuStatsDiscoveryPathMtuMax, nqaPathMtuStatsOptimumFirstStep, nqaPathMtuStatsBusies, nqaPathMtuStatsTimeouts, nqaPathMtuStatsDrops, nqaPathMtuStatsProbeResponses, nqaPathMtuStatsPathMtu, nqaPathMtuStatsTestFinished, nqaJitterStatsOWSumDS, nqaResultsSumCompletionTime, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High, nqaFTPStatsCompletions, nqaFTPStatsRTDOverThresholds, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsCtrlConnMinTime, nqaFTPStatsCtrlConnAveTime, nqaFTPStatsDataConnMaxTime, nqaFTPStatsDataConnMinTime, nqaFTPStatsDataConnAveTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsConnectSumTimeMin, nqaFTPStatsConnectSumTimeAve, nqaFTPStatsMessageBodyOctetsSum, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsDiscontinued, nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes, nqaFTPStatsTestFinished, nqaMpingStatsTargetAddressType, nqaMpingStatsTargetAddress, nqaMpingStatsReceiverAddress, nqaMpingStatsCompletions, nqaMpingStatsRTDOverThresholds, nqaMpingStatsSumCompletionTime, nqaMpingStatsSumCompletionTime2Low, nqaMpingStatsSumCompletionTime2High, nqaMpingStatsCompletionTimeMin, nqaMpingStatsCompletionTimeMax, nqaMpingStatsTimeouts, nqaMpingStatsBusies, nqaMpingStatsSequenceErrors, nqaMpingStatsDrops, nqaMpingStatsProbeResponses, nqaMpingStatsSentProbes, nqaMpingStatsLastGoodProbe, nqaMpingStatsTestFinished, nqaMpingStatsReceiverCount, nqaMpingStatsLastFibHit, nqaMpingStatsRttAvg, nqaMpingStatsLostPacketRatio, nqaMtracertStatsAddressType, nqaMtracertStatsAddress, nqaMtracertStatsCompletions, nqaMtracertStatsCurHopCount, nqaMtracertStatsCurProbeCount, nqaMtracertStatsRTDOverThresholds, nqaMtracertStatsTimeouts, nqaMtracertStatsBusies, nqaMtracertStatsSequenceErrors, nqaMtracertStatsDrops, nqaMtracertStatsProbeResponses, nqaMtracertStatsSentProbes, nqaMtracertStatsLastGoodProbe, nqaMtracertStatsLastGoodPath, nqaMtracertStatsTestFinished, nqaMtracertStatsCurPathTTL, nqaMtracertStatsMaxPathTTL, nqaMtracertStatsInPkgLossRate, nqaMtracertStatsSGPkgLossRate, nqaMtracertStatsInPkgRate, nqaMtracertStatsOutPkgRate, nqaMtracertStatsTimeDelay,nqaResultsRttAvg,nqaResultsLostPacketRatio,nqaResultsRingResponseNode,nqaResultChangeRecord,nqaResultsDetail, nqaHTTPStatsRttAvg,nqaHTTPStatsLostPacketRatio,nqaFTPStatsRttAvg,nqaFTPStatsLostPacketRatio, nqaPppoeStatsCompletions, nqaPppoeStatsCurrentPhase, nqaPppoeStatsErrorMessage, nqaPppoeDiscoveryTimeout, nqaPppoeLcpTimeout, nqaPppoeAuthorizationTimeout, nqaPppoeNcpTimeout, nqaPppoeConnectionTime, nqaPppoeClientSessionId, nqaPppoeClientIpAddress, nqaPppoeGatewayIpAddress, nqaRtptestStatsCompletions, nqaRtptestStatsIpTargetAddressType, nqaRtptestStatsIpTargetAddress, nqaRtptestStatsSourceAddressType, nqaRtptestStatsIpSourceAddress, nqaRtptestStatsMinRtt, nqaRtptestStatsMaxRtt, nqaRtptestStatsAverageRtt, nqaRtptestStatsProbeResponses, nqaRtptestStatsSentProbes, nqaRtptestStatsMaxJitter, nqaRtptestStatsMinJitter, nqaRtptestStatsAvgJitter,nqaRtptestStatsLostPacketRatio,nqaRtptestStatsSumRtt,nqaRtptestStatsMinDelaySD,nqaRtptestStatsMaxDelaySD,nqaRtptestStatsAvgDelaySD,nqaRtptestStatsMinJitterSD,nqaRtptestStatsMaxJitterSD,nqaRtptestStatsAvgJitterSD,nqaRtptestStatsLossRateSD,nqaRtptestStatsIPDVSD, nqaRtplistenStatsCompletions, nqaRtplistenStatsIpTargetAddressType, nqaRtplistenStatsIpTargetAddress, nqaRtplistenStatsIpTargetPort, nqaRtplistenStatsSourceAddressType, nqaRtplistenStatsIpSourceAddress, nqaRtplistenStatsIpSourcePort, nqaRtplistenStatsDSField, nqaRtplistenStatsMaxJitter, nqaRtplistenStatsMinJitter, nqaRtplistenStatsAvgJitter, nqaRtplistenStatsLostPacketRatio, nqaRtplistenStatsMaxLostPacketNumber, nqaGeneralflowStatsCompletions, nqaGeneralflowStatsResultDetail, nqaGeneralflowStatsTxRate, nqaGeneralflowStatsRxRate, nqaGeneralflowStatsMinRtt, nqaGeneralflowStatsMaxRtt, nqaGeneralflowStatsAverageRtt, nqaGeneralflowStatsMaxJitter, nqaGeneralflowStatsMinJitter, nqaGeneralflowStatsAvgJitter, nqaGeneralflowStatsTxCountLow, nqaGeneralflowStatsTxCountHigh, nqaGeneralflowStatsRxCountLow, nqaGeneralflowStatsRxCountHigh, nqaGeneralflowStatsFrameLossRate, nqaGeneralflowStatsPrecision, nqaGeneralflowStatsThroughput, nqaGeneralflowStatsDataSize,nqaGeneralflowStatsTestStatus, nqaGeneralflowStatsFrameLossRatePrecision,nqaGeneralflowStatsFrameLossRatePrecisionValue,nqaGeneralflowStatsStartTime,nqaGeneralflowStatsEndTime,nqaGeneralflowStatsTestTotalTime,nqaGeneralflowStatsTestRemainingTime,nqaGeneralflowStatsTestTime,nqaGeneralflowStatsEstimatedTestTime, nqaGeneralflowStatsRealTestTime,nqaGeneralflowStatsFrameRate,nqaGeneralflowStatsCurrentRateCount, nqaGeneralflowCurrentStatsThroughput, nqaGeneralflowCurrentStatsFrameLossRate, nqaEthernetServiceStatsTestProcess, nqaEthernetServiceStatsTestStatus, nqaEthernetServiceStatsTestFlowNum, nqaEthernetServiceStatsTestMode, nqaEthernetServiceStatsTestBeginTime, nqaEthernetServiceStatsTestEndTime, nqaEthernetServiceStatsTestTotalTime, nqaEthernetServiceStatsTestRealTime, nqaEthernetServiceStatsResultDetail, nqaEthernetServiceStatsTestPhase, nqaEthernetServiceStatsFlowBeginTime, nqaEthernetServiceStatsFlowEndTime, nqaEthernetServiceStatsDisorderPacketsNum, nqaEthernetServiceStatsFlowResult, nqaEthernetServiceStatsFlowMinIR, nqaEthernetServiceStatsFlowMaxIR, nqaEthernetServiceStatsFlowMeanIR, nqaEthernetServiceStatsFlowMinFTD, nqaEthernetServiceStatsFlowMaxFTD, nqaEthernetServiceStatsFlowMeanFTD, nqaEthernetServiceStatsFlowMinFDV, nqaEthernetServiceStatsFlowMaxFDV, nqaEthernetServiceStatsFlowMeanFDV, nqaEthernetServiceStatsFlowFlCount, nqaEthernetServiceStatsFlowFLRPrecision, nqaEthernetServiceStatsFlowFLR, nqaEthernetServiceStatsFlowUnavailCount, nqaEthernetServiceStatsFlowAvailPrecision, nqaEthernetServiceStatsFlowAVAIL, nqaMultiPathResultsCompletions, nqaMultiPathResultsTestAttempts, nqaMultiPathResultsCurHopCount, nqaMultiPathResultsCurProbeCount, nqaMultiPathResultsRTDOverThresholds, nqaMultiPathResultsSumCompletionTime, nqaMultiPathResultsSumCompletionTime2Low, nqaMultiPathResultsSumCompletionTime2High, nqaMultiPathResultsCompletionTimeMin,nqaMultiPathResultsCompletionTimeMax, nqaMultiPathResultsDisconnects, nqaMultiPathResultsTimeouts, nqaMultiPathResultsBusies, nqaMultiPathResultsNoConnections, nqaMultiPathResultsSequenceErrors, nqaMultiPathResultsDrops, nqaMultiPathResultsAddressType, nqaMultiPathResultsAddress, nqaMultiPathResultsProbeResponses, nqaMultiPathResultsSentProbes, nqaMultiPathResultsLastGoodProbe, nqaMultiPathResultsLastGoodPath, nqaMultiPathResultsTestFinished, nqaMultiPathResultsRttAvg, nqaMultiPathResultsLostPacketRatio, nqaMultiPathResultsSrPolicyPreference, nqaMultiPathResultsSrPolicyPathType, nqaMultiPathResultsSrPolicyProtocol, nqaMultiPathResultsSrPolicyNodeAddress, nqaMultiPathResultsSrPolicyDiscriminator, nqaMultiPathResultsSrPolicySegListId, nqaMultiPathResultsSrPolicyXcIndex, nqaResultsChangeToFailureTimes, nqaResultsChangeToSuccessTimes, nqaResultsChangeToNoResultTimes, nqaResultsChangeToNegotiationFailureTimes, nqaResultsChangeToAbnormalTimes, nqaResultsFailureTimes, nqaResultsSuccessTimes, nqaResultsNoResultTimes, nqaResultsNegotiationFailureTimes, nqaResultsAbnormalTimes, nqaResultsLastCompletions,nqaResultsTestType,nqaResultsSourceIP,nqaResultsSourceIfName,nqaResultsDestinationIP } STATUS current DESCRIPTION "Description." ::= { nqaGroups 4 } nqaHistoryGroup OBJECT-GROUP OBJECTS { nqaHistoryTimeStamp, nqaHistoryAddressType, nqaHistoryAddress, nqaHistoryCompletionTime, nqaHistoryFinishState, nqaHistoryLastRC, nqaMpingHistoryAddressType, nqaMpingHistoryAddress, nqaMpingHistoryReceiverAddress, nqaMpingHistoryTimeStamp, nqaMpingHistoryCompletionTime, nqaMpingHistoryFinishState, nqaMpingHistoryLastRC, nqaMpingHistoryFibHit, nqaMtracertHistoryAddressType, nqaMtracertHistoryAddress, nqaMtracertHistoryTimeStamp, nqaMtracertHistoryCompletionTime, nqaMtracertHistoryLastRC, nqaMtracertHistoryCurQueryMode, nqaMtracertHistoryQueryArrivalTime, nqaMtracertHistoryIncomingIfAddress, nqaMtracertHistoryOutgoingIfAddress, nqaMtracertHistoryPreHopRouterAddress, nqaMtracertHistoryInputPacketCount, nqaMtracertHistoryOutputPacketCount, nqaMtracertHistoryTotalSGPacketCount, nqaMtracertHistoryRtgProtocol, nqaMtracertHistoryFwdTTL, nqaMtracertHistoryFwdCode, nqaMtracertHistroyFinishState, nqaVplsMacTracertHistoryTimeStamp, nqaVplsMacTracertHistoryAddressType, nqaVplsMacTracertHistoryAddress, nqaVplsMacTracertHistoryCompletionTime, nqaVplsMacTracertHistoryFinishState, nqaVplsMacTracertHistoryHitFlag, nqaVplsMacTracertHistoryDSCount, nqaVplsMacTracertHistorySuccessPathNode, nqaVplsMacTracertHistoryDSAddress, nqaVplsMTraceHistoryResponserAddressType, nqaVplsMTraceHistoryResponserAddress, nqaVplsMTraceHistoryUpStreamAddressType, nqaVplsMTraceHistoryUpStreamAddress, nqaVplsMTraceHistoryReceivedTtl, nqaVplsMTraceHistoryIGMPVersion, nqaVplsMTraceHistoryIGMPSnpgEnable, nqaVplsMTraceHistoryIGMPProxyEnable, nqaVplsMTraceHistoryIGMPRouterPortLearningEnable, nqaVplsMTraceHistoryRequireRouterAlertEnable, nqaVplsMTraceHistoryForwardMode, nqaVplsMTraceHistoryHitFlag, nqaVplsMTraceHistoryPWExist, nqaVplsMTraceHistoryGroupPolicy, nqaVplsMTraceHistoryRcvQueryCount, nqaVplsMTraceHistoryRcvReportCount, nqaVplsMTraceHistoryRcvLeaveCount, nqaVplsMTraceHistoryTimeStamp, nqaVplsMTraceHistoryCompletionTime, nqaVplsMTraceHistoryLastRC, nqaVplsMTraceHistoryLastRSC, nqaVplsMTraceHistoryFinishState, nqaVplsMTraceHistorySuccessPathNode,nqaMacTraceHistoryTTL,nqaMacTraceHistorySeqNumber,nqaMacTraceHistoryForwarded,nqaMacTraceHistoryCompletionTime, nqaMacTraceHistoryTerminalMep,nqaMacTraceHistoryRelayAction,nqaMacTraceHistoryIngressAction,nqaMacTraceHistoryIngressMac,nqaMacTraceHistoryIngressIfName,nqaMacTraceHistoryEgressAction, nqaMacTraceHistoryEgressMac,nqaMacTraceHistoryEgressIfName,nqaMultiPathHistoryTimeStamp,nqaMultiPathHistoryAddressType,nqaMultiPathHistoryAddress,nqaMultiPathHistoryCompletionTime, nqaMultiPathHistoryFinishState,nqaMultiPathHistoryLastRC } STATUS current DESCRIPTION "Description." ::= { nqaGroups 5 } nqaNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { nqaResultsProbeFailed, nqaResultsTestFailed, nqaResultsTestCompleted, nqaResultsThresholdNotification, nqaHTTPStatsProbeFailed, nqaHTTPStatsTestFailed, nqaHTTPStatsTestCompleted, nqaHTTPStatsThresholdNotification, nqaJitterStatsProbeFailed, nqaJitterStatsTestFailed, nqaJitterStatsTestCompleted, nqaFTPStatsProbeFailed, nqaFTPStatsTestFailed, nqaFTPStatsTestCompleted, nqaFTPStatsThresholdNotification, nqaJitterStatsRTDThresholdNotification, nqaJitterStatsOWDThresholdNotificationSD, nqaJitterStatsOWDThresholdNotificationDS, nqaNegotiateFailed , nqaRisingAlarmNotification, nqaFallingAlarmNotification, nqaFtpSaveRecordNotification, nqaPppoeStatsTestFailed, nqaPppoeStatsTestCompleted, nqaJitterStatsJitterThresholdNotificationSD, nqaJitterStatsJitterThresholdNotificationDS, nqaReflectorStateChangeNotification, nqaResultsTestResultChange, nqaResultsTestResultChangePackedNotification, nqaResultsTestResultStatusChange } STATUS current DESCRIPTION "The notification which are required to be supported by implementations of this MIB." ::= { nqaGroups 6 } nqaCollectStatsGroup OBJECT-GROUP OBJECTS { nqaJitterCollectStatsCompletions,nqaJitterCollectStatsRTDOverThresholds,nqaJitterCollectStatsOWDOverThresholdsSD,nqaJitterCollectStatsOWDOverThresholdsDS,nqaJitterCollectStatsNumOfRTT,nqaJitterCollectStatsRTTSum, nqaJitterCollectStatsRTTSum2Low,nqaJitterCollectStatsRTTSum2High,nqaJitterCollectStatsRTTMin,nqaJitterCollectStatsRTTMax,nqaJitterCollectStatsMinOfPositivesSD,nqaJitterCollectStatsMaxOfPositivesSD, nqaJitterCollectStatsNumOfPositivesSD,nqaJitterCollectStatsSumOfPositivesSD,nqaJitterCollectStatsSum2OfPositivesSDLow,nqaJitterCollectStatsSum2OfPositivesSDHigh,nqaJitterCollectStatsMinOfNegativesSD, nqaJitterCollectStatsMaxOfNegativesSD,nqaJitterCollectStatsNumOfNegativesSD,nqaJitterCollectStatsSumOfNegativesSD,nqaJitterCollectStatsSum2OfNegativesSDLow,nqaJitterCollectStatsSum2OfNegativesSDHigh, nqaJitterCollectStatsMinOfPositivesDS,nqaJitterCollectStatsMaxOfPositivesDS,nqaJitterCollectStatsNumOfPositivesDS,nqaJitterCollectStatsSumOfPositivesDS,nqaJitterCollectStatsSum2OfPositivesDSLow, nqaJitterCollectStatsSum2OfPositivesDSHigh,nqaJitterCollectStatsMinOfNegativesDS,nqaJitterCollectStatsMaxOfNegativesDS,nqaJitterCollectStatsNumOfNegativesDS,nqaJitterCollectStatsSumOfNegativesDS, nqaJitterCollectStatsSum2OfNegativesDSLow,nqaJitterCollectStatsSum2OfNegativesDSHigh,nqaJitterCollectStatsMaxDelaySD,nqaJitterCollectStatsMaxDelayDS,nqaJitterCollectStatsNumOfOWD,nqaJitterCollectStatsOWSumSD, nqaJitterCollectStatsOWSumDS,nqaJitterCollectStatsPacketLossSD,nqaJitterCollectStatsPacketLossDS,nqaJitterCollectStatsPacketLossUnknown,nqaJitterCollectStatsPacketOutOfSequences,nqaJitterCollectStatsPacketLossRatio, nqaJitterCollectStatsErrors,nqaJitterCollectStatsBusies,nqaJitterCollectStatsTimeouts,nqaJitterCollectStatsProbeResponses,nqaJitterCollectStatsSentProbes,nqaJitterCollectStatsDrops,nqaJitterCollectStatsRTTAvg, nqaJitterCollectStatsAvgJitter,nqaJitterCollectStatsAvgJitterSD,nqaJitterCollectStatsAvgJitterDS,nqaJitterCollectStatsJitterOut,nqaJitterCollectStatsJitterIn, nqaJitterCollectStatsMinDelaySD,nqaJitterCollectStatsMinDelayDS,nqaJitterCollectStatsAvgDelaySD,nqaJitterCollectStatsAvgDelayDS, nqaJitterCollectStatsPktRewriteNum, nqaJitterCollectStatsPktRewriteRatio, nqaJitterCollectStatsPktDisorderNum, nqaJitterCollectStatsPktDisorderRatio, nqaJitterCollectStatsFragPktDisorderNum, nqaJitterCollectStatsFragPktDisorderRatio } STATUS current DESCRIPTION "Description." ::= { nqaGroups 7 } nqaAlarmGroup OBJECT-GROUP OBJECTS { nqaMaxAlarmNum,nqaMaxEventNum,nqaAlarmVariable,nqaAlarmSampleType,nqaAlarmValue,nqaAlarmStartUpNqaAlarm,nqaAlarmRisingThreshold,nqaAlarmDescription, nqaAlarmFallingThreshold,nqaAlarmRisingEventIndex,nqaAlarmFallingEventIndex,nqaAlarmStatus,nqaEventDescription,nqaEventAdminName,nqaEventOperationTag,nqaEventType,nqaEventStatus} STATUS current DESCRIPTION "Description." ::= { nqaGroups 8 } nqaFtpSaveRecordGroup OBJECT-GROUP OBJECTS { nqaFtpSaveRecordEnable,nqaFtpSaveRecordIpAddr,nqaFtpSaveRecordVrfName,nqaFtpSaveRecordUserName,nqaFtpSaveRecordPassword,nqaFtpSaveRecordFileName,nqaFtpSaveRecordItemNum,nqaFtpSaveRecordTime,nqaFtpSaveRecordNotificationEnable,nqaFtpSaveRecordLastFileName} STATUS current DESCRIPTION "Description." ::= { nqaGroups 9 } nqaReflectorGroup OBJECT-GROUP OBJECTS { nqaReflectorID,nqaReflectorIfIndex,nqaReflectorMacAddress, nqaReflectorIPAddressType,nqaReflectorIPAddress,nqaReflectorSimulationIPAddressType,nqaReflectorSimulationIPAddress,nqaReflectorPevid,nqaReflectorCevid,nqaReflectorAgeTime,nqaReflectorSourcePort, nqaReflectorDestinationPort,nqaReflectorState,nqaReflectorSurvivalTime,nqaReflectorRecommendedTestMacAddress,nqaReflectorTestBehavior,nqaReflectorDiscardPriority,nqaReflectorDirection,nqaReflectorEndTime,nqaReflectorExchangePort,nqaReflectorTestFlowId,nqaReflectorRowStatus} STATUS current DESCRIPTION "Description." ::= { nqaGroups 10 } nqaTestFlowGroup OBJECT-GROUP OBJECTS { nqaTestFlowId,nqaTestFlowBeginDstMAC,nqaTestFlowEndDstMAC, nqaTestFlowBeginSrcMAC,nqaTestFlowEndSrcMAC,nqaTestFlowDstIPAddrType,nqaTestFlowBeginDstIP,nqaTestFlowEndDstIP,nqaTestFlowSrcIPAddrType,nqaTestFlowBeginSrcIP,nqaTestFlowEndSrcIP, nqaTestFlowPevid,nqaTestFlowBeginCevid,nqaTestFlowEndCevid,nqaTestFlowBeginUdpDstPort,nqaTestFlowEndUdpDstPort,nqaTestFlowBeginUdpSrcPort,nqaTestFlowEndUdpSrcPort,nqaTestFlowCir,nqaTestFlowEir,nqaTestFlowFlr,nqaTestFlowFtd,nqaTestFlowFdv, nqaTestFlowCirSimpleTest,nqaTestFlowTrafficPolicing,nqaTestFlowDescription,nqaTestFlowColorMode,nqaTestFlowPriorityType,nqaTestFlowGreenBeginValue,nqaTestFlowGreenEndValue,nqaTestFlowYellowBeginValue,nqaTestFlowYellowEndValue, nqaTestFlowRowStatus,nqaTestFlowDstMacModifierType,nqaTestFlowDstMacModifierMask,nqaTestFlowDstMacModifierCount,nqaTestFlowDstMacModifierStep,nqaTestFlowSrcMacModifierType,nqaTestFlowSrcMacModifierMask,nqaTestFlowSrcMacModifierCount, nqaTestFlowSrcMacModifierStep,nqaTestFlowDstIPModifierType,nqaTestFlowDstIPModifierMask,nqaTestFlowDstIPModifierCount,nqaTestFlowDstIPModifierStep,nqaTestFlowSrcIPModifierType,nqaTestFlowSrcIPModifierMask,nqaTestFlowSrcIPModifierCount, nqaTestFlowSrcIPModifierStep} STATUS current DESCRIPTION "Description." ::= { nqaGroups 11 } nqaCompliances OBJECT IDENTIFIER ::= { nqaConformance 2 } nqaCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { nqaBaseGroup, nqaAdminGroup, nqaStatsGroup,nqaAlarmGroup,nqaFtpSaveRecordGroup,nqaReflectorGroup} ::= { nqaCompliances 1 } nqaCollectStats OBJECT IDENTIFIER ::= { nqa 8 } nqaJitterCollectStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaJitterCollectStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the rolling accumulated history of the Jitter operation." ::= { nqaCollectStats 1 } nqaJitterCollectStatsEntry OBJECT-TYPE SYNTAX NqaJitterCollectStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the rolling accumulated history of the Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterCollectStatsIndex } ::= { nqaJitterCollectStatsTable 1 } NqaJitterCollectStatsEntry ::= SEQUENCE { nqaJitterCollectStatsIndex Integer32, nqaJitterCollectStatsCompletions Counter32, nqaJitterCollectStatsRTDOverThresholds Counter32, nqaJitterCollectStatsOWDOverThresholdsSD Counter32, nqaJitterCollectStatsOWDOverThresholdsDS Counter32, nqaJitterCollectStatsNumOfRTT Counter32, nqaJitterCollectStatsRTTSum Counter32, nqaJitterCollectStatsRTTSum2Low Counter32, nqaJitterCollectStatsRTTSum2High Counter32, nqaJitterCollectStatsRTTMin Gauge32, nqaJitterCollectStatsRTTMax Gauge32, nqaJitterCollectStatsMinOfPositivesSD Gauge32, nqaJitterCollectStatsMaxOfPositivesSD Gauge32, nqaJitterCollectStatsNumOfPositivesSD Counter32, nqaJitterCollectStatsSumOfPositivesSD Counter32, nqaJitterCollectStatsSum2OfPositivesSDLow Counter32, nqaJitterCollectStatsSum2OfPositivesSDHigh Counter32, nqaJitterCollectStatsMinOfNegativesSD Gauge32, nqaJitterCollectStatsMaxOfNegativesSD Gauge32, nqaJitterCollectStatsNumOfNegativesSD Counter32, nqaJitterCollectStatsSumOfNegativesSD Counter32, nqaJitterCollectStatsSum2OfNegativesSDLow Counter32, nqaJitterCollectStatsSum2OfNegativesSDHigh Counter32, nqaJitterCollectStatsMinOfPositivesDS Gauge32, nqaJitterCollectStatsMaxOfPositivesDS Gauge32, nqaJitterCollectStatsNumOfPositivesDS Counter32, nqaJitterCollectStatsSumOfPositivesDS Counter32, nqaJitterCollectStatsSum2OfPositivesDSLow Counter32, nqaJitterCollectStatsSum2OfPositivesDSHigh Counter32, nqaJitterCollectStatsMinOfNegativesDS Gauge32, nqaJitterCollectStatsMaxOfNegativesDS Gauge32, nqaJitterCollectStatsNumOfNegativesDS Counter32, nqaJitterCollectStatsSumOfNegativesDS Counter32, nqaJitterCollectStatsSum2OfNegativesDSLow Counter32, nqaJitterCollectStatsSum2OfNegativesDSHigh Counter32, nqaJitterCollectStatsMaxDelaySD Gauge32, nqaJitterCollectStatsMaxDelayDS Gauge32, nqaJitterCollectStatsNumOfOWD Counter32, nqaJitterCollectStatsOWSumSD Counter32, nqaJitterCollectStatsOWSumDS Counter32, nqaJitterCollectStatsPacketLossSD Counter32, nqaJitterCollectStatsPacketLossDS Counter32, nqaJitterCollectStatsPacketLossUnknown Counter32, nqaJitterCollectStatsPacketOutOfSequences Counter32, nqaJitterCollectStatsPacketLossRatio Gauge32, nqaJitterCollectStatsErrors Counter32, nqaJitterCollectStatsBusies Counter32, nqaJitterCollectStatsTimeouts Counter32, nqaJitterCollectStatsProbeResponses Counter32, nqaJitterCollectStatsSentProbes Counter32, nqaJitterCollectStatsDrops Counter32, nqaJitterCollectStatsRTTAvg Gauge32, nqaJitterCollectStatsAvgJitter Gauge32, nqaJitterCollectStatsAvgJitterSD Gauge32, nqaJitterCollectStatsAvgJitterDS Gauge32, nqaJitterCollectStatsJitterOut OCTET STRING, nqaJitterCollectStatsJitterIn OCTET STRING, nqaJitterCollectStatsMinDelaySD Gauge32, nqaJitterCollectStatsMinDelayDS Gauge32, nqaJitterCollectStatsAvgDelaySD Gauge32, nqaJitterCollectStatsAvgDelayDS Gauge32, nqaJitterCollectStatsPktRewriteNum Counter32, nqaJitterCollectStatsPktRewriteRatio Gauge32, nqaJitterCollectStatsPktDisorderNum Counter32, nqaJitterCollectStatsPktDisorderRatio Gauge32, nqaJitterCollectStatsFragPktDisorderNum Counter32, nqaJitterCollectStatsFragPktDisorderRatio Gauge32 } nqaJitterCollectStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The third index of jitter collection statistics table." ::= { nqaJitterCollectStatsEntry 1 } nqaJitterCollectStatsCompletions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the tests that have completed successfully." ::= { nqaJitterCollectStatsEntry 2 } nqaJitterCollectStatsRTDOverThresholds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate RTD (Round Trip Delay) threshold." ::= { nqaJitterCollectStatsEntry 3 } nqaJitterCollectStatsOWDOverThresholdsSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from source to destination." ::= { nqaJitterCollectStatsEntry 4 } nqaJitterCollectStatsOWDOverThresholdsDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tests that violate OWD (One Way Delay) threshold from destination to source." ::= { nqaJitterCollectStatsEntry 5 } nqaJitterCollectStatsNumOfRTT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RTTs that are successfully measured by tests." ::= { nqaJitterCollectStatsEntry 6 } nqaJitterCollectStatsRTTSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTTs that are successfully measured." ::= { nqaJitterCollectStatsEntry 7 } nqaJitterCollectStatsRTTSum2Low OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTTs that are successfully measured by tests (low order 32 bits)." ::= { nqaJitterCollectStatsEntry 8 } nqaJitterCollectStatsRTTSum2High OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTTs that are successfully measured by tests (high order 32 bits)." ::= { nqaJitterCollectStatsEntry 9 } nqaJitterCollectStatsRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of RTTs that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 10 } nqaJitterCollectStatsRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of RTTs that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 11 } nqaJitterCollectStatsMinOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 12 } nqaJitterCollectStatsMaxOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 13 } nqaJitterCollectStatsNumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all positive jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 14 } nqaJitterCollectStatsSumOfPositivesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all positive jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 15 } nqaJitterCollectStatsSum2OfPositivesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits)." ::= { nqaJitterCollectStatsEntry 16 } nqaJitterCollectStatsSum2OfPositivesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits)." ::= { nqaJitterCollectStatsEntry 17 } nqaJitterCollectStatsMinOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 18 } nqaJitterCollectStatsMaxOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 19 } nqaJitterCollectStatsNumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all negative jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 20 } nqaJitterCollectStatsSumOfNegativesSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all negative jitter values from source to destination." ::= { nqaJitterCollectStatsEntry 21 } nqaJitterCollectStatsSum2OfNegativesSDLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from source to destination (low order 32 bits)." ::= { nqaJitterCollectStatsEntry 22 } nqaJitterCollectStatsSum2OfNegativesSDHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from source to destination (high order 32 bits)." ::= { nqaJitterCollectStatsEntry 23 } nqaJitterCollectStatsMinOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 24 } nqaJitterCollectStatsMaxOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 25 } nqaJitterCollectStatsNumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all positive jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 26 } nqaJitterCollectStatsSumOfPositivesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all positive jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 27 } nqaJitterCollectStatsSum2OfPositivesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits)." ::= { nqaJitterCollectStatsEntry 28 } nqaJitterCollectStatsSum2OfPositivesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits)." ::= { nqaJitterCollectStatsEntry 29 } nqaJitterCollectStatsMinOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 30 } nqaJitterCollectStatsMaxOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 31 } nqaJitterCollectStatsNumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all negative jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 32 } nqaJitterCollectStatsSumOfNegativesDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute value of all negative jitter values from destination to source." ::= { nqaJitterCollectStatsEntry 33 } nqaJitterCollectStatsSum2OfNegativesDSLow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from destination to source (low order 32 bits)." ::= { nqaJitterCollectStatsEntry 34 } nqaJitterCollectStatsSum2OfNegativesDSHigh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of absolute value of all negative values from destination to source (high order 32 bits)." ::= { nqaJitterCollectStatsEntry 35 } nqaJitterCollectStatsMaxDelaySD OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from source to destination." ::= { nqaJitterCollectStatsEntry 36 } nqaJitterCollectStatsMaxDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all OWD (One Way Delay) from destination to source." ::= { nqaJitterCollectStatsEntry 37 } nqaJitterCollectStatsNumOfOWD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OWDs that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 38 } nqaJitterCollectStatsOWSumSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured by tests from source to destination." ::= { nqaJitterCollectStatsEntry 39 } nqaJitterCollectStatsOWSumDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of OWDs that were successfully measured by tests from destination to source." ::= { nqaJitterCollectStatsEntry 40 } nqaJitterCollectStatsPacketLossSD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from source to destination." ::= { nqaJitterCollectStatsEntry 41 } nqaJitterCollectStatsPacketLossDS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from destination to source." ::= { nqaJitterCollectStatsEntry 42 } nqaJitterCollectStatsPacketLossUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost for which we cannot determine the direction." ::= { nqaJitterCollectStatsEntry 43 } nqaJitterCollectStatsPacketOutOfSequences OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets arrived out of sequence." ::= { nqaJitterCollectStatsEntry 44 } nqaJitterCollectStatsPacketLossRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the packets lost to all packets sent in the test." ::= { nqaJitterCollectStatsEntry 45 } nqaJitterCollectStatsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of errors occurred in the test." ::= { nqaJitterCollectStatsEntry 46 } nqaJitterCollectStatsBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a test couldn't be initialized because the previous test has not completed." ::= { nqaJitterCollectStatsEntry 47 } nqaJitterCollectStatsTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses arrived over the time." ::= { nqaJitterCollectStatsEntry 48 } nqaJitterCollectStatsProbeResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses from echo-server for the packets sent by the test." ::= { nqaJitterCollectStatsEntry 49 } nqaJitterCollectStatsSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent in the test." ::= { nqaJitterCollectStatsEntry 50 } nqaJitterCollectStatsDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that were sent failed in the test." ::= { nqaJitterCollectStatsEntry 51 } nqaJitterCollectStatsRTTAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTTs that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 52 } nqaJitterCollectStatsAvgJitter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 53 } nqaJitterCollectStatsAvgJitterSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from source to destination that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 54 } nqaJitterCollectStatsAvgJitterDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of jitter values from destination to source that were successfully measured by tests." ::= { nqaJitterCollectStatsEntry 55 } nqaJitterCollectStatsJitterOut OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter (RFC1889) at responder." ::= { nqaJitterCollectStatsEntry 56 } nqaJitterCollectStatsJitterIn OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter (RFC1889) at sender." ::= { nqaJitterCollectStatsEntry 57 } nqaJitterCollectStatsMinDelaySD OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all OWD (One Way Delay) from source to destination." ::= { nqaJitterCollectStatsEntry 58 } nqaJitterCollectStatsMinDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all OWD (One Way Delay) from destination to source." ::= { nqaJitterCollectStatsEntry 59 } nqaJitterCollectStatsAvgDelaySD OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average of all OWD (One Way Delay) from source to destination." ::= { nqaJitterCollectStatsEntry 60 } nqaJitterCollectStatsAvgDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average of all OWD (One Way Delay) from destination to source." ::= { nqaJitterCollectStatsEntry 61 } nqaJitterCollectStatsPktRewriteNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all the packets have been rewrited." ::= { nqaJitterCollectStatsEntry 62 } nqaJitterCollectStatsPktRewriteRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of all the packets have been rewrited." ::= { nqaJitterCollectStatsEntry 63 } nqaJitterCollectStatsPktDisorderNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all the packets have been disordered." ::= { nqaJitterCollectStatsEntry 64 } nqaJitterCollectStatsPktDisorderRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of all the packets have been disordered." ::= { nqaJitterCollectStatsEntry 65 } nqaJitterCollectStatsFragPktDisorderNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of all the packets whose fragments have been disordered." ::= { nqaJitterCollectStatsEntry 66 } nqaJitterCollectStatsFragPktDisorderRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of all the packets whose fragments have been disordered." ::= { nqaJitterCollectStatsEntry 67 } nqaAlarm OBJECT IDENTIFIER ::= { nqa 9 } nqaMaxAlarmNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of alarms." ::= { nqaAlarm 1 } nqaMaxEventNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of events that alarms can trigger." ::= { nqaAlarm 2} nqaAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of alarm entries." ::= { nqaAlarm 3 } nqaAlarmEntry OBJECT-TYPE SYNTAX NqaAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that set up a periodic checking for alarm conditions." INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaAlarmIndex } ::= { nqaAlarmTable 1 } NqaAlarmEntry ::= SEQUENCE { nqaAlarmIndex Integer32, nqaAlarmVariable INTEGER, nqaAlarmSampleType INTEGER, nqaAlarmValue Integer32, nqaAlarmStartUpNqaAlarm INTEGER, nqaAlarmRisingThreshold Integer32, nqaAlarmFallingThreshold Integer32, nqaAlarmRisingEventIndex Integer32, nqaAlarmFallingEventIndex Integer32, nqaAlarmDescription OCTET STRING, nqaAlarmStatus RowStatus } nqaAlarmIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a row in the nqaAlarmTable." ::= { nqaAlarmEntry 1 } nqaAlarmVariable OBJECT-TYPE SYNTAX INTEGER { rttAvg(1), lostPacketRatio(2), packetLossSd(3), packetLossDs(4), jitterRavg(5), jitterSdAvg(6), jitterDsAvg(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the particular variable to be sampled." ::= { nqaAlarmEntry 11 } nqaAlarmSampleType OBJECT-TYPE SYNTAX INTEGER { delta(1), absolute(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "delta(1): relative value absolute(2): absolute value Relative value: indicates the relative value to the last sampling. Currently, only absolute(2) is supported." ::= { nqaAlarmEntry 12 } nqaAlarmValue OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of the monitored object is compared with the upper limit and lower limit." ::= { nqaAlarmEntry 13 } nqaAlarmStartUpNqaAlarm OBJECT-TYPE SYNTAX INTEGER { risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated." ::= { nqaAlarmEntry 14 } nqaAlarmRisingThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Set the upper limit of the alarm." ::= { nqaAlarmEntry 15 } nqaAlarmFallingThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Set the lower limit of the alarm." ::= { nqaAlarmEntry 16 } nqaAlarmRisingEventIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of the event triggered when the node value exceeds the upper limit." ::= { nqaAlarmEntry 17 } nqaAlarmFallingEventIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of the event triggered when the node value is under the lower limit." ::= { nqaAlarmEntry 18 } nqaAlarmDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm Description." ::= { nqaAlarmEntry 19} nqaAlarmStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the alarm row." ::= { nqaAlarmEntry 51 } nqaEventTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of events to be generated." ::= { nqaAlarm 4 } nqaEventEntry OBJECT-TYPE SYNTAX NqaEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of parameters that describe an event to be generated when certain conditions are met. " INDEX { nqaEventIndex } ::= { nqaEventTable 1 } NqaEventEntry ::= SEQUENCE { nqaEventIndex Integer32, nqaEventType INTEGER, nqaEventDescription OCTET STRING, nqaEventAdminName OCTET STRING, nqaEventOperationTag OCTET STRING, nqaEventStatus RowStatus } nqaEventIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a row in the nqaEventTable." ::= { nqaEventEntry 1 } nqaEventType OBJECT-TYPE SYNTAX INTEGER { none(1), log(2), trap(3), logAndTrap(4), linkage(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Event type, that is, behaviors for processing events: none(1): no behavior log(2): keeping logs trap(3): sending trap messages logandtrap(4): keeping logs and sending trap messages linkage(5): start the linkaged test-instance." ::= { nqaEventEntry 11 } nqaEventDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "Event description." ::= { nqaEventEntry 12 } nqaEventAdminName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Administrator name of event test instance." ::= { nqaEventEntry 13 } nqaEventOperationTag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Operation tag of event test instance." ::= { nqaEventEntry 14 } nqaEventStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the event row." ::= { nqaEventEntry 51} nqaSaveRecord OBJECT IDENTIFIER ::= { nqa 10} nqaFtpSaveRecordEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies whether saving test results to the FTP server through FTP is enabled. enable(1) disable(2) By default, the value is disable(2)." ::= { nqaSaveRecord 1} nqaFtpSaveRecordIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IP address of the FTP server to which test results are saved." ::= { nqaSaveRecord 2} nqaFtpSaveRecordVrfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the name of the VRF instance for the FTP server to which test results are saved." ::= { nqaSaveRecord 3} nqaFtpSaveRecordUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the user name of the FTP server to which test results are saved." ::= { nqaSaveRecord 4} nqaFtpSaveRecordPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the password used when the test results are saved to the FTP server." ::= { nqaSaveRecord 5} nqaFtpSaveRecordFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the file name of used by the FTP server to save test results." ::= { nqaSaveRecord 6} nqaFtpSaveRecordItemNum OBJECT-TYPE SYNTAX Integer32 (10000..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the number of NQA test results that can be saved in a file created on the FTP server. The default value is 100000." -- DEFVAL { 100000 } ::= { nqaSaveRecord 7} nqaFtpSaveRecordTime OBJECT-TYPE SYNTAX Integer32 (1..43200) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the duration that NQA test results can be saved in a file created on the FTP server. The default duration is 60 minutes." -- DEFVAL { 60} ::= { nqaSaveRecord 8} nqaFtpSaveRecordNotificationEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether to send trap messages when saving test results to the FTP server is completed. By default, the value is disable(2)." ::= { nqaSaveRecord 9} nqaFtpSaveRecordLastFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..220)) MAX-ACCESS read-only STATUS current DESCRIPTION "Set the name of the file used to save the last test record to the FTP server." ::= { nqaSaveRecord 10} nqaReflector OBJECT IDENTIFIER ::= { nqa 11 } nqaReflectorTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description: nqaReflectorTable describes how to configure an NQA reflector. Creation restrictions: None Modification restrictions: This table is generated after a reflector is created. The entries in this table can be modified when nqaReflectorID is specified. The reflector cannot be modified after being created. Deletion restrictions: None Access restrictions: None" ::= { nqaReflector 1 } nqaReflectorEntry OBJECT-TYPE SYNTAX NqaReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaReflectorTable." INDEX { nqaReflectorID } ::= { nqaReflectorTable 1 } NqaReflectorEntry ::= SEQUENCE { nqaReflectorID Integer32, nqaReflectorIfIndex Integer32, nqaReflectorMacAddress MacAddress, nqaReflectorIPAddressType InetAddressType, nqaReflectorIPAddress InetAddress, nqaReflectorSimulationIPAddressType InetAddressType, nqaReflectorSimulationIPAddress InetAddress, nqaReflectorPevid Integer32, nqaReflectorCevid Integer32, nqaReflectorAgeTime Integer32, nqaReflectorSourcePort Integer32, nqaReflectorDestinationPort Integer32, nqaReflectorState INTEGER, nqaReflectorSurvivalTime Integer32, nqaReflectorRecommendedTestMacAddress MacAddress, nqaReflectorTestBehavior Unsigned32, nqaReflectorDiscardPriority Unsigned32, nqaReflectorDirection Unsigned32, nqaReflectorEndTime Integer32, nqaReflectorExchangePort INTEGER, nqaReflectorTestFlowId OCTET STRING, nqaReflectorRowStatus RowStatus } nqaReflectorID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the reflector ID, which is also the index of this table." ::= { nqaReflectorEntry 1 } nqaReflectorIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the index of the reflector interface." ::= { nqaReflectorEntry 2 } nqaReflectorMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MAC address." ::= { nqaReflectorEntry 3 } nqaReflectorIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of an IP address." DEFVAL { unknown } ::= { nqaReflectorEntry 4 } nqaReflectorIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP address." ::= { nqaReflectorEntry 5 } nqaReflectorSimulationIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of an simulated IP address." DEFVAL { unknown } ::= { nqaReflectorEntry 6 } nqaReflectorSimulationIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the simulated IP address." ::= { nqaReflectorEntry 7 } nqaReflectorPevid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the PE VLAN ID." ::= { nqaReflectorEntry 8 } nqaReflectorCevid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the CE VLAN ID." ::= { nqaReflectorEntry 9 } nqaReflectorAgeTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the aging time, in seconds. Setting the value to 0 indicates reserving the reflector eternally." ::= { nqaReflectorEntry 10 } nqaReflectorSourcePort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked" ::= { nqaReflectorEntry 11 } nqaReflectorDestinationPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked" ::= { nqaReflectorEntry 12 } nqaReflectorState OBJECT-TYPE SYNTAX INTEGER { active(1), notinservice(2), unknown(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the reflector. 1: active 2: not in service" DEFVAL { active } ::= { nqaReflectorEntry 13 } nqaReflectorSurvivalTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the survival time of the reflector, in seconds." ::= { nqaReflectorEntry 14 } nqaReflectorRecommendedTestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the recommended test MAC address." ::= { nqaReflectorEntry 15 } nqaReflectorTestBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the action performed on the non-test frames by the reflector. 0: default value for 2544 reflector. 1: sharemode for 2544 reflector. 2: exclusive mode for Y.1564 reflector. 3: test flow mode for Y.1564 reflector." DEFVAL { 0 } ::= { nqaReflectorEntry 16 } nqaReflectorDiscardPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario. The default is 4294967295." ::= { nqaReflectorEntry 17 } nqaReflectorDirection OBJECT-TYPE SYNTAX Unsigned32(1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the reflect direction. 1 indicates inbound. Reflect packets in manner of simulate product forwarding. 2 indicates outbound. Reflect packets in manner of output." ::= { nqaReflectorEntry 18 } nqaReflectorEndTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the end time of the reflector, in seconds." ::= { nqaReflectorEntry 19 } nqaReflectorExchangePort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether exchange port. 0: disable 1: enable" DEFVAL { disable } ::= { nqaReflectorEntry 20 } nqaReflectorTestFlowId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ID of test flow." ::= { nqaReflectorEntry 21 } nqaReflectorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of a row, which can be created or deleted but not modified. The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { nqaReflectorEntry 50} nqaTestFlow OBJECT IDENTIFIER ::= { nqa 12 } nqaTestFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF NqaTestFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of NQA testflow definitions." ::= { nqaTestFlow 1 } nqaTestFlowEntry OBJECT-TYPE SYNTAX NqaTestFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the nqaTestFlowTable." INDEX { nqaTestFlowId } ::= { nqaTestFlowTable 1 } NqaTestFlowEntry ::= SEQUENCE { nqaTestFlowId Unsigned32, nqaTestFlowBeginDstMAC MacAddress, nqaTestFlowEndDstMAC MacAddress, nqaTestFlowBeginSrcMAC MacAddress, nqaTestFlowEndSrcMAC MacAddress, nqaTestFlowDstIPAddrType InetAddressType, nqaTestFlowBeginDstIP InetAddress, nqaTestFlowEndDstIP InetAddress, nqaTestFlowSrcIPAddrType InetAddressType, nqaTestFlowBeginSrcIP InetAddress, nqaTestFlowEndSrcIP InetAddress, nqaTestFlowPevid Unsigned32, nqaTestFlowBeginCevid Unsigned32, nqaTestFlowEndCevid Unsigned32, nqaTestFlowBeginUdpDstPort Unsigned32, nqaTestFlowEndUdpDstPort Unsigned32, nqaTestFlowBeginUdpSrcPort Unsigned32, nqaTestFlowEndUdpSrcPort Unsigned32, nqaTestFlowCir Unsigned32, nqaTestFlowEir Unsigned32, nqaTestFlowFlr Unsigned32, nqaTestFlowFtd Unsigned32, nqaTestFlowFdv Unsigned32, nqaTestFlowCirSimpleTest INTEGER, nqaTestFlowTrafficPolicing INTEGER, nqaTestFlowDescription OCTET STRING, nqaTestFlowColorMode INTEGER, nqaTestFlowPriorityType INTEGER, nqaTestFlowGreenBeginValue Unsigned32, nqaTestFlowGreenEndValue Unsigned32, nqaTestFlowYellowBeginValue Unsigned32, nqaTestFlowYellowEndValue Unsigned32, nqaTestFlowRowStatus RowStatus, nqaTestFlowDstMacModifierType INTEGER, nqaTestFlowDstMacModifierMask MacAddress, nqaTestFlowDstMacModifierCount Unsigned32, nqaTestFlowDstMacModifierStep Unsigned32, nqaTestFlowSrcMacModifierType INTEGER, nqaTestFlowSrcMacModifierMask MacAddress, nqaTestFlowSrcMacModifierCount Unsigned32, nqaTestFlowSrcMacModifierStep Unsigned32, nqaTestFlowDstIPModifierType INTEGER, nqaTestFlowDstIPModifierMask InetAddress, nqaTestFlowDstIPModifierCount Unsigned32, nqaTestFlowDstIPModifierStep Unsigned32, nqaTestFlowSrcIPModifierType INTEGER, nqaTestFlowSrcIPModifierMask InetAddress, nqaTestFlowSrcIPModifierCount Unsigned32, nqaTestFlowSrcIPModifierStep Unsigned32 } nqaTestFlowId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the testflow ID, which is also the index of this table." ::= { nqaTestFlowEntry 1 } nqaTestFlowBeginDstMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of destination MAC address." ::= { nqaTestFlowEntry 2 } nqaTestFlowEndDstMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of destination MAC address." ::= { nqaTestFlowEntry 3 } nqaTestFlowBeginSrcMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of source MAC address." ::= { nqaTestFlowEntry 4 } nqaTestFlowEndSrcMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of source MAC address." ::= { nqaTestFlowEntry 5 } nqaTestFlowDstIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of destination IP address." DEFVAL { ipv4 } ::= { nqaTestFlowEntry 6 } nqaTestFlowBeginDstIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the beginning of destination IP address." ::= { nqaTestFlowEntry 7 } nqaTestFlowEndDstIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the end of destination IP address." ::= { nqaTestFlowEntry 8 } nqaTestFlowSrcIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of source IP address." DEFVAL { ipv4 } ::= { nqaTestFlowEntry 9 } nqaTestFlowBeginSrcIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the beginning of source IP address." ::= { nqaTestFlowEntry 10 } nqaTestFlowEndSrcIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the end of source IP address." ::= { nqaTestFlowEntry 11 } nqaTestFlowPevid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the PE VLAN ID." ::= { nqaTestFlowEntry 12 } nqaTestFlowBeginCevid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of CE VLAN ID." ::= { nqaTestFlowEntry 13 } nqaTestFlowEndCevid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of CE VLAN ID." ::= { nqaTestFlowEntry 14 } nqaTestFlowBeginUdpDstPort OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of UDP destination port. The default value is 7." ::= { nqaTestFlowEntry 15 } nqaTestFlowEndUdpDstPort OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of UDP destination port." ::= { nqaTestFlowEntry 16 } nqaTestFlowBeginUdpSrcPort OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of UDP source port. The default value is 49184." ::= { nqaTestFlowEntry 17 } nqaTestFlowEndUdpSrcPort OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of UDP source port." ::= { nqaTestFlowEntry 18 } nqaTestFlowCir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates value of Committed Information Rate." ::= { nqaTestFlowEntry 19 } nqaTestFlowEir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates value of Excess Information Rate." ::= { nqaTestFlowEntry 20 } nqaTestFlowFlr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates value of Frame Loss Rate." ::= { nqaTestFlowEntry 21 } nqaTestFlowFtd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates value of Frame Transfer Delay." ::= { nqaTestFlowEntry 22 } nqaTestFlowFdv OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates value of Frame Delay Variation." ::= { nqaTestFlowEntry 23 } nqaTestFlowCirSimpleTest OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'enable (1)', cir simple test is enabled.The default is disable(0)." DEFVAL { disable } ::= { nqaTestFlowEntry 24 } nqaTestFlowTrafficPolicing OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'enable (1)', traffic policing is enabled.The default is disable(0)." DEFVAL { disable } ::= { nqaTestFlowEntry 25 } nqaTestFlowDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the description information for testflow." ::= { nqaTestFlowEntry 26 } nqaTestFlowColorMode OBJECT-TYPE SYNTAX INTEGER { colorblind(0), colorware(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the color mode for testflow, the default value is colorblind(0)." DEFVAL { colorblind } ::= { nqaTestFlowEntry 27 } nqaTestFlowPriorityType OBJECT-TYPE SYNTAX INTEGER { unknown(0), eth8021p(1), dscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the priority type of color mode." ::= { nqaTestFlowEntry 28 } nqaTestFlowGreenBeginValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of priority value of Green." ::= { nqaTestFlowEntry 29 } nqaTestFlowGreenEndValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of priority value of Green." ::= { nqaTestFlowEntry 30 } nqaTestFlowYellowBeginValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the beginning of priority value of Yellow." ::= { nqaTestFlowEntry 31 } nqaTestFlowYellowEndValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the end of priority value of Yellow." ::= { nqaTestFlowEntry 32 } nqaTestFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of a row, which can be created or deleted but not modified. The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'." ::= { nqaTestFlowEntry 33} nqaTestFlowDstMacModifierType OBJECT-TYPE SYNTAX INTEGER { singleORrange(0), increment(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values." ::= { nqaTestFlowEntry 34 } nqaTestFlowDstMacModifierMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0." ::= { nqaTestFlowEntry 35 } nqaTestFlowDstMacModifierCount OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of MAC address modifier values. The invalid value is 0." ::= { nqaTestFlowEntry 36 } nqaTestFlowDstMacModifierStep OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates MAC address modifier step. The invalid value is 0." ::= { nqaTestFlowEntry 37 } nqaTestFlowSrcMacModifierType OBJECT-TYPE SYNTAX INTEGER { singleORrange(0), increment(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values." ::= { nqaTestFlowEntry 38 } nqaTestFlowSrcMacModifierMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0." ::= { nqaTestFlowEntry 39 } nqaTestFlowSrcMacModifierCount OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of MAC address modifier values. The invalid value is 0." ::= { nqaTestFlowEntry 40 } nqaTestFlowSrcMacModifierStep OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates MAC address modifier step. The invalid value is 0." ::= { nqaTestFlowEntry 41 } nqaTestFlowDstIPModifierType OBJECT-TYPE SYNTAX INTEGER { singleORrange(0), increment(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values." ::= { nqaTestFlowEntry 42 } nqaTestFlowDstIPModifierMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address modifier bits of value that applied to add the step value. " ::= { nqaTestFlowEntry 43 } nqaTestFlowDstIPModifierCount OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of IP address modifier values. The invalid value is 0." ::= { nqaTestFlowEntry 44 } nqaTestFlowDstIPModifierStep OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates IP address modifier step. The invalid value is 0." ::= { nqaTestFlowEntry 45 } nqaTestFlowSrcIPModifierType OBJECT-TYPE SYNTAX INTEGER { singleORrange(0), increment(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values." ::= { nqaTestFlowEntry 46 } nqaTestFlowSrcIPModifierMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address modifier bits of value that applied to add the step value. " ::= { nqaTestFlowEntry 47 } nqaTestFlowSrcIPModifierCount OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of IP address modifier values. The invalid value is 0." ::= { nqaTestFlowEntry 48 } nqaTestFlowSrcIPModifierStep OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates IP address modifier step. The invalid value is 0." ::= { nqaTestFlowEntry 49 } END -- -- NQA-MIB.mib --