-- =========================================================================================================== -- Copyright (C) 2013 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing, -- MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet -- if certain network adapters have the same MAC address. -- Reference: -- Version: V1.22 -- ============================================================================================================ HUAWEI-IPDSLAM-VMAC-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM IF-MIB OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI PhysAddress ,RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC huaweiUtility FROM HUAWEI-MIB; hwIpDslamVmac MODULE-IDENTITY LAST-UPDATED "201312240000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing, MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet if certain network adapters have the same MAC address. " -- Revision history REVISION "201312240000Z" DESCRIPTION "V1.22, modified the value range of hwIPoESmacUserIndex." REVISION "201210100000Z" DESCRIPTION "V1.21, Add variable type: IpAddress " REVISION "201208250000Z" DESCRIPTION "V1.20, modified the value range of hwIpDslamVmacSlotNumbering and hwIpDslamVmacPortBegin." REVISION "201205220000Z" DESCRIPTION "V1.19, added hwIPoESmacCurrentUserTable, hwIPoESmacCurrentUserEntry, hwIPoESmacUserIndex, hwIPoESmacUserFlowId, hwIPoESmacUserIPAdress, hwIPoESmacSessionUserMac, hwIPoESmacVlanID." REVISION "201203120000Z" DESCRIPTION "V1.18, added hwIpDslamVmacSlotNumbering, hwIpDslamVmacPortBegin." REVISION "201108110000Z" DESCRIPTION "V1.17, modified the default value of hwIpDslamVmacDslamId." REVISION "201107290000Z" DESCRIPTION "V1.16, modified the description." REVISION "201106090000Z" DESCRIPTION "V1.15, added hwIpDslamVmacControlprotocolIpv6oeStatus." REVISION "201105040000Z" DESCRIPTION "V1.14, added hwOltVmacUmacMappingTable, hwIpDslamVmacOntVmacNum and hwIpDslamVmacOltId to support GPON board." REVISION "201011090000Z" DESCRIPTION "V1.13, modified description of leaves." REVISION "201004260000Z" DESCRIPTION "V1.12, modified description of leaves." REVISION "201004040000Z" DESCRIPTION "V1.11, modified description of leaves." REVISION "201003040000Z" DESCRIPTION "V1.10, modified multi-mac to multiMac, modified single-mac to singleMac." REVISION "201002020000Z" DESCRIPTION "V1.09, modified the hwIpDslamVmacStatus to solve a problem that enum value cannot display correctly." REVISION "201001120000Z" DESCRIPTION "V1.08, formated the mib file.NTEGER to Integer32, DisplayString to OCTET STRING,D EFVAL move into description." REVISION "200911200000Z" DESCRIPTION "V1.07, added hwIpDslamIPoEMacMode,It is used for dynamic IPoE access." REVISION "200906250000Z" DESCRIPTION "V1.06, modified hwIpDslamVmacDslamId value range,between 0x0 and 0xFFFFFFFF." REVISION "200607310000Z" DESCRIPTION "V1.00, initial version." ::= { huaweiUtility 110} hwIpDslamVmacStatus OBJECT-TYPE SYNTAX INTEGER { macpoolMode(1), disabled(2), dslamIdMode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the global status of the VMAC function. Options: 1. macpoolMode(1) -indicates the global status of the VMAC function is macpoolMode 2. disabled(2) -indicates the global status of the VMAC function is disabled 3. dslamIdMode(3) -indicates the global status of the VMAC function is dslamIdMode Default: disabled(2) It is used to query and set the VMAC status. " ::= { hwIpDslamVmac 1 } hwIpDslamVmacPortVmacNum OBJECT-TYPE SYNTAX Integer32(1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the number of VMAC addresses of each port, which is used for setting or querying the number of VMAC addresses of a port. Range: 1-32 Default: 32 " ::= { hwIpDslamVmac 2 } hwIpDslamVmacAllocationTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIpDslamVmacAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VMAC allocation mapping table. The indexes of this table are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac and hwIpDslamVmacAllocationScope. " ::= { hwIpDslamVmac 3 } hwIpDslamVmacAllocationEntry OBJECT-TYPE SYNTAX HwIpDslamVmacAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VMAC allocation mapping table. The indexes of this entry are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac and hwIpDslamVmacAllocationScope. " INDEX { hwIpDslamVmacAllocationIfIndex } ::= { hwIpDslamVmacAllocationTable 1 } HwIpDslamVmacAllocationEntry ::= SEQUENCE { hwIpDslamVmacAllocationIfIndex Integer32, hwIpDslamVmacAllocationStartmac PhysAddress, hwIpDslamVmacAllocationScope Integer32 } hwIpDslamVmacAllocationIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object uniquely identifies this VMAC allocation mapping table entry. " ::= { hwIpDslamVmacAllocationEntry 1 } hwIpDslamVmacAllocationStartmac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The start MAC of VMAC allocation mapping table. " ::= { hwIpDslamVmacAllocationEntry 2 } hwIpDslamVmacAllocationScope OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The scope of VMAC allocation mapping table. " ::= { hwIpDslamVmacAllocationEntry 3 } hwIpDslamVmacUmacMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIpDslamVmacUmacMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping relation between the VMAC address and the UMAC address, which is used to query the mapping relation between the VMAC address and the UMAC address. The index of this table is hwIpDslamVmacUmacMappingIfIndex. " ::= { hwIpDslamVmac 4 } hwIpDslamVmacUmacMappingEntry OBJECT-TYPE SYNTAX HwIpDslamVmacUmacMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping relation between the VMAC address and the UMAC address, which is used to query the mapping relation between the VMAC address and the UMAC address. The index of this entry is hwIpDslamVmacUmacMappingIfIndex. " INDEX { hwIpDslamVmacUmacMappingIfIndex } ::= { hwIpDslamVmacUmacMappingTable 1 } HwIpDslamVmacUmacMappingEntry ::= SEQUENCE { hwIpDslamVmacUmacMappingIfIndex Integer32, hwIpDslamVmacUmacMappingVmacAddress OCTET STRING, hwIpDslamVmacUmacMappingUmacAddress OCTET STRING } hwIpDslamVmacUmacMappingIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of hwIpDslamVmacUmacMappingTable, which is used for specifying the VMAC address and the UMAC address of a port. It is determined by the shelf ID, slot ID, and port ID. " ::= { hwIpDslamVmacUmacMappingEntry 1 } hwIpDslamVmacUmacMappingVmacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VMAC address in hwIpDslamVmacUmacMappingTable. It is a character string consisting of 1-32 VMAC addresses of a port. " ::= { hwIpDslamVmacUmacMappingEntry 2 } hwIpDslamVmacUmacMappingUmacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..192)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UMAC address in hwIpDslamVmacUmacMappingTable. It is a character string consisting of 1-32 VMAC addresses of a port. " ::= { hwIpDslamVmacUmacMappingEntry 3 } hwIpDslamVmacDslamId OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the DSLAM ID, which is used for setting or querying the DSLAM ID. Range: 0x0-0xFFFFFFFF Default: 0x7FFFF When the VMAC function is enabled based on DSLAM ID, the DSLAM ID and the reserved bits must be configured, and the DSLAM ID must be smaller than or equal to 0x7FFFF. " ::= { hwIpDslamVmac 5 } hwIpDslamVmacReserveBits OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the reserved bits in a VMAC address, which occupies 6 bits. " ::= { hwIpDslamVmac 6} hwIpDslamIPoEMacMode OBJECT-TYPE SYNTAX INTEGER { multiMac(1), singleMac(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used for setting and querying the MAC address mode of a dynamic IPoE user. Options: 1. multiMac(1) -indicates the MAC address mode is multiMac 2. singleMac(2) -indicates the MAC address mode is singleMac Default: multiMac(1) " ::= { hwIpDslamVmac 7 } hwIpDslamVmacOltId OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the OLT ID, which is used for setting or querying the OLT ID. Range: 0x0-0xFFFF Default: 0xFFFF When the VMAC function is enabled based on OLT ID, the OLT ID and the reserved bits must be configured. " ::= { hwIpDslamVmac 8 } hwIpDslamVmacOntVmacNum OBJECT-TYPE SYNTAX Integer32(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the number of VMAC addresses of each ONT, which is used for setting or querying the number of VMAC addresses of an ONT. Range: 1-8 Default: 8 " ::= { hwIpDslamVmac 9 } hwOltVmacUmacMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOltVmacUmacMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping relation between the VMAC address and the UMAC address, which is used to query the mapping relation between the VMAC address and the UMAC address. The indexes of this table are hwOltVmacUmacMappingIfIndex and hwOltVmacUmacMappingOntID. " ::= { hwIpDslamVmac 10 } hwOltVmacUmacMappingEntry OBJECT-TYPE SYNTAX HwOltVmacUmacMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping relation between the VMAC address and the UMAC address, which is used to query the mapping relation between the VMAC address and the UMAC address. The indexes of this entry are hwOltVmacUmacMappingIfIndex and hwOltVmacUmacMappingOntID. " INDEX { hwOltVmacUmacMappingIfIndex, hwOltVmacUmacMappingOntID } ::= { hwOltVmacUmacMappingTable 1 } HwOltVmacUmacMappingEntry ::= SEQUENCE { hwOltVmacUmacMappingIfIndex Integer32, hwOltVmacUmacMappingOntID Integer32, hwOltVmacUmacMappingVmacAddress OCTET STRING, hwOltVmacUmacMappingUmacAddress OCTET STRING } hwOltVmacUmacMappingIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates one index of hwOltVmacUmacMappingTable, which is used for specifying the VMAC address and the UMAC address of an ONT. It is determined by the shelf ID, slot ID, and port ID. " ::= { hwOltVmacUmacMappingEntry 1 } hwOltVmacUmacMappingOntID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates one index of hwOltVmacUmacMappingTable, which is used for specifying the VMAC address and the UMAC address of an ONT. " ::= { hwOltVmacUmacMappingEntry 2 } hwOltVmacUmacMappingVmacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VMAC address in hwOltVmacUmacMappingTable. It is a character string consisting of 1-8 VMAC addresses of an ONT. " ::= { hwOltVmacUmacMappingEntry 3 } hwOltVmacUmacMappingUmacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UMAC address in hwOltVmacUmacMappingTable. It is a character string consisting of 1-8 VMAC addresses of an ONT. " ::= { hwOltVmacUmacMappingEntry 4 } hwIpDslamVmacControlprotocolIpv6oeStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to query and set the VMAC control protocol of IPv6oE status. Options: 1. disable(1) -indicates the VMAC control protocol of IPv6oE status disable 2. enable(2) -indicates the VMAC control protocol of IPv6oE status enable Default: disable(1) " ::= { hwIpDslamVmac 11 } hwIpDslamVmacSlotNumbering OBJECT-TYPE SYNTAX INTEGER { logical(1), physical(2), default(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to query and set the VMAC slot number format. Options: 1. logical(1) -indicates the VMAC slot number format is logical 2. physical(2) -indicates the VMAC slot number format is physical 3. default(3) -Indicates that the slot number for the port-based VMAC address is a physical slot number. However, the slot number for the ONT-based VMAC address is equal to the physical slot number + 1. That is, for the ONT-based VMAC address, this parameter does not indicate the physical slot number or the logical slot number. Default: default(3) " ::= { hwIpDslamVmac 12 } hwIpDslamVmacPortBegin OBJECT-TYPE SYNTAX Unsigned32(0..1 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to query and set the starting portid of VMAC. Range: 0-1, 4294967295 Default: 4294967295 The value 4294967295 indicates that the port-based VMAC starting portid is 0, but the ONT-based VMAC starting portid is 1 " ::= { hwIpDslamVmac 13 } hwIPoESmacCurrentUserTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPoESmacCurrentUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the information about a IPoE single-MAC user. The indexes of this table are ifIndex and hwIPoESmacUserIndex. " ::= { hwIpDslamVmac 14 } hwIPoESmacCurrentUserEntry OBJECT-TYPE SYNTAX HwIPoESmacCurrentUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the information about a IPoE single-MAC user. The indexes of this entry are ifIndex and hwIPoESmacUserIndex. " INDEX { ifIndex, hwIPoESmacUserIndex } ::= { hwIPoESmacCurrentUserTable 1 } HwIPoESmacCurrentUserEntry ::= SEQUENCE { hwIPoESmacUserIndex Integer32, hwIPoESmacUserFlowId Integer32, hwIPoESmacUserIPAdress IpAddress, hwIPoESmacSessionUserMac OCTET STRING, hwIPoESmacVlanID Integer32 } hwIPoESmacUserIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPoE SMAC user index. " ::= { hwIPoESmacCurrentUserEntry 1 } hwIPoESmacUserFlowId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPoE user flow ID. " ::= { hwIPoESmacCurrentUserEntry 2 } hwIPoESmacUserIPAdress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPoE SMAC user IpAddress. " ::= { hwIPoESmacCurrentUserEntry 3 } hwIPoESmacSessionUserMac OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPoE SMAC user MAC address. " ::= { hwIPoESmacCurrentUserEntry 4 } hwIPoESmacVlanID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "IPoE SMAC user VLAN. " ::= { hwIPoESmacCurrentUserEntry 5 } END