--**MOD+*********************************************************************** --* Module: hpicfSyslog.mib --* --* Copyright (C) 2008-2018 Hewlett Packard Enterprise Development Company LP --* All Right Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett Packard Enterprise Development Company LP. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett Packard Enterprise Development Company LP. --* --*Purpose: This file contains MIB definition of HP-ICF-SYSLOG-MIB --* --**MOD-************************************************************************** HP-ICF-SYSLOG-MIB DEFINITIONS ::= BEGIN IMPORTS hpicfSyslog FROM HP-ICF-OID MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue, DisplayString FROM SNMPv2-TC InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; hpicfSyslogMIB MODULE-IDENTITY LAST-UPDATED "201807100000Z" -- July 10, 2018 ORGANIZATION "HPE Networking" CONTACT-INFO "Hewlett Packard Enterprise Development Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "The MIB module for configuring and monitoring Syslog applications. The HP Syslog application sends Syslog messages." REVISION "201901080000Z" -- January 8, 2019 DESCRIPTION "Added 'estc' entry in HpicfSyslogSystemModule" REVISION "201807100000Z" -- July 10, 2018 DESCRIPTION "Added 'authOrder' entry in HpicfSyslogSystemModule" REVISION "201808220000Z" -- August 22, 2018 DESCRIPTION "Added 'caDownload' entry in HpicfSyslogSystemModule" REVISION "201802140000Z" -- Febrauary 14, 2018 DESCRIPTION "Added 'dfp' entry in HpicfSyslogSystemModule" REVISION "201712110000Z" -- December 11, 2017 DESCRIPTION "Added 'httpProxy' entry in HpicfSyslogSystemModule" REVISION "201710170000Z" -- October 17, 2017 DESCRIPTION "Added 'devOnboard' entry in HpicfSyslogSystemModule" REVISION "201710120000Z" -- October 12, 2017 DESCRIPTION "Added 'cfgRestore' entry in HpicfSyslogSystemModule" REVISION "201709050000Z" -- September 5, 2017 DESCRIPTION "Added 'vlanMad' entry in HpicfSyslogSystemModule" REVISION "201707030000Z" -- Jul 03, 2017 DESCRIPTION "Added hpicfSyslogControlFilterName" REVISION "201607130000Z" -- July 13, 2016 DESCRIPTION "Added SyslogCmdClearLog to hpicfSyslogLogMsgOptions" REVISION "201606140000Z" -- June 14, 2016 DESCRIPTION "Added 'userTnode' to HpicfSyslogSystemModule" REVISION "201605120000Z" -- May 12, 2016 DESCRIPTION "Added 'ztpIpsec' to HpicfSyslogSystemModule" REVISION "201604010000Z" -- April 01, 2016 DESCRIPTION "Added 'central' to HpicfSyslogSystemModule" REVISION "201603230000Z" -- March 23, 2016 DESCRIPTION "Added 'activate' to 'HpicfSyslogSystemModule'." REVISION "201603100000Z" -- March 10, 2016 DESCRIPTION "Added 'hpicfSyslogCommandLogging' to 'hpicfSyslogLogging'." REVISION "201601210526Z" -- January 21, 2016 DESCRIPTION "Added 'tunneledNode' entry in HpicfSyslogSystemModule" REVISION "201509110526Z" -- September 11, 2015 DESCRIPTION "Added 'captivePortal' entry in hpicfSyslogSystemModule" REVISION "201509040000Z" -- September 4, 2015 DESCRIPTION "Added 'lldpmad' entry in hpicfSyslogSystemModule" REVISION "201509030000Z" -- September 03, 2015 DESCRIPTION "Added 'bfd' entry in hpicfSyslogSystemModule" REVISION "201508310000Z" -- August 31, 2015 DESCRIPTION "Added 'rip' entry in hpicfSyslogSystemModule" REVISION "201508280000Z" -- August 28, 2015 DESCRIPTION "Added 'mvrp' entry in hpicfSyslogSystemModule" REVISION "201508070000Z" -- August 7, 2015 DESCRIPTION "Added 'psDetect' entry in hpicfSyslogSystemModule" REVISION "201505200000Z" -- May 20, 2015 DESCRIPTION "Added 'rrpp' entry in hpicfSyslogSystemModule" REVISION "201505090000Z" -- May 09, 2015 DESCRIPTION "Added 'arpthrottle' entry in hpicfSyslogSystemModule" REVISION "201505090000Z" -- May 09, 2015 DESCRIPTION "Added 'dnsfilter' entry in hpicfSyslogSystemModule" REVISION "201505080000Z" -- May 08, 2015 DESCRIPTION "Added 'ipspf' entry in hpicfSyslogSystemModule" REVISION "201504160000Z" -- Apr 16, 2015 DESCRIPTION "Added 'ripng' entry in hpicfSyslogSystemModule" REVISION "201411130000Z" -- Nov 13, 2014 DESCRIPTION "Added hpicfSyslogSecClearLog for securty logging hpicfSyslogLogMsgOptions" REVISION "201407170000Z" -- July 17, 2014 DESCRIPTION "Added acct susbsytem for accounting RMON logging in hpicfSyslogSystemModule" REVISION "201311060000Z" -- November 6, 2013 DESCRIPTION "Added 'tr69' and 'http' entries in hpicfSyslogSystemModule" REVISION "201309240000Z" -- September 24, 2013 DESCRIPTION "Added 'hpicfSyslogOriginId' entry to hpicfSyslogPriority" REVISION "201309140000Z" -- September 14, 2013 DESCRIPTION "Added 'job' entry in hpicfSyslogSystemModule" REVISION "201309050000Z" -- September 05, 2013 DESCRIPTION "Added 'dhcp-server' entry in hpicfSyslogSystemModule" REVISION "201306250000Z" -- June 25, 2013 DESCRIPTION "Added 'tls' entry in hpicfSyslogControlTransportProtocol" REVISION "201308070000Z" -- August 7, 2013 DESCRIPTION "Added 'insysprog' entry in HpicfSyslogSystemModule" REVISION "201203150000Z" -- March 15, 2012 DESCRIPTION "Added 'hpespcm' entry in HpicfSyslogSystemModule" REVISION "201201300000Z" -- Jan 30, 2012 DESCRIPTION "Added 'securemode' entry in HpicfSyslogSystemModule" REVISION "201110110000Z" -- October 11, 2011 DESCRIPTION "Added 'mobility-agent' entry in HpicfSyslogSystemModule" REVISION "201108240000Z" -- August 24, 2011 DESCRIPTION "Added 'ecm' and 'hpespip' entries in HpicfSyslogSystemModule" REVISION "201107190000Z" -- July 19, 2011 DESCRIPTION "Added 'ra-guard' entry in HpicfSyslogSystemModule" REVISION "201106130000Z" -- June 13, 2011 DESCRIPTION "Added 'slp' entries in HpicfSyslogSystemModule" REVISION "201105270000Z" -- May 27, 2011 DESCRIPTION "Added 'rfs', 'crypto' and 'testmode' entries in HpicfSyslogSystemModule" REVISION "201103210000Z" -- March 21, 2011 DESCRIPTION "Added 'stacking' entry in HpicfSyslogSystemModule 'stacking' is applicable only for platforms which support true stacking solution" REVISION "201103050000Z" -- March 05, 2011 DESCRIPTION "Added 'hpicfSyslogAlerts' group of objects. Objects 'hpicfSyslogAlertIndex', 'hpicfSyslogAlertStatus', and 'hpicfSyslogAlertTransmitInterval' added to this group." REVISION "201011090000Z" -- November 09, 2010 DESCRIPTION "Added 'sftp' entry in HpicfSyslogSystemModule" REVISION "201010250000Z" -- October 25, 2010 DESCRIPTION "Added 'dt' entry in HpicfSyslogSystemModule" REVISION "201008110000Z" -- August 11, 2010 DESCRIPTION "Added 'fips' entry in HpicfSyslogSystemModule" REVISION "201006200000Z" -- June 20, 2010 DESCRIPTION "Added 'hpicfSyslogControlTransportProtocol' & 'hpicfSyslogControlDestinationPort' to hpicfSyslogControlEntry." REVISION "201003200000Z" -- March 20, 2010 DESCRIPTION "Added 'bgp' entry in HpicfSyslogSystemModule" REVISION "201003120000Z" -- March 12, 2010 DESCRIPTION "Added 'dhcpv6r' entry in HpicfSyslogSystemModule" REVISION "201001270000Z" -- January 27, 2010 DESCRIPTION "Added an enum for ospf3 in HpicfSyslogSystemModule" REVISION "200908190000Z" -- August 19, 2009 DESCRIPTION "Added 'hpicfSyslogControlSmmLog to hpicfSyslogControlEntry & 'hpicfSyslogLogMsgOptions' to the hpicfSyslogObjects." REVISION "200902180000Z" -- February 18, 2009 DESCRIPTION "Added 'hpicfSyslogControlBindAddrIsOobm' MIB object to 'hpicfSyslogControlTable'. Add an enum for oobm in ''HpicfSyslogSystemModule'. " REVISION "200901300000Z" -- January 30, 2009 DESCRIPTION "Add Syslog statistics hpicfSyslogObjects." REVISION "200811180000Z" -- November 18, 2008 DESCRIPTION "Add 'srcip' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200807090000Z" -- July 9, 2008 DESCRIPTION "Add 'hpsm' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200806260000Z" -- June 26, 2008 DESCRIPTION "Add 'dipld' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200806250000Z" -- June 25, 2008 DESCRIPTION "Correct comments that are not clear or written properly. " REVISION "200801250000Z" -- April 25, 2008 DESCRIPTION "Add 'bridge' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200801011121Z" -- January 1, 2008 DESCRIPTION "The initial version." ::= { hpicfSyslog 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- HpicfSyslogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the facility of a Syslog application. " SYNTAX INTEGER { kern (0), user (1), mail (2), daemon (3), auth (4), syslog (5), lpr (6), news (7), uucp (8), sys9 (9), sys10 (10), sys11 (11), sys12 (12), sys13 (13), sys14 (14), cron (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23) } HpicfSyslogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the severity of a Syslog application. " SYNTAX INTEGER { major (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), debug (7) } HpicfSyslogSystemModule ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the system module (subsystem) of a Syslog application. " SYNTAX INTEGER { all-pass (0), vlan (1), ip (2), igmp (3), ipx (4), stp (5), system (6), chassis (7), console (8), ports (9), dhcp (10), download (11), tcp (12), telnet (13), timep (14), tftp (15), xmodem (16), update (17), mgr (18), bridge (19), snmp (20), addrmgr (21), agp (22), fault (23), ldbal (24), garp (25), gvrp (26), cos (27), lacp (28), dhcpr (29), stack (30), dma (31), sntp (32), ieee8021x (33), cdp (34), auth (35), tacacs (36), radius (37), ssh (38), netinet (39), ospf (40), xrrp (41), ssl (42), ipaddrmgr (43), macauth (44), kms (45), pim (46), maclock (47), acl (48), udpf (49), inst-mon (50), udld (51), hpesp (52), lldp (53), connfilt (54), ratelim (55), idm (56), iplock (57), dhcp-snoop (58), vrrp (59), usb (60), licensing (61), loop-protect (62), sflow (63), arp-protect (64), dhcpv6c (65), mtm (66), mld (67), dca (68), qinq (69), autorun (70), ffi (71), wsm (72), dipld (73), hpsm (74), srcip (75), policy (76), oobm (77), trmode (78), ospf3 (79), dhcpv6r (80), bgp (81), ufd (82), fips (83), dt (84), dcbx (85), sftp (86), stacking (87), rfs (88), testmode (89), crypto (90), slp (91), ra-guard (92), ecm (93), hpespip (94), mobility-agent (95), securemode (96), mSatProxy (97), eSatProxy (98), hpespcm (99), openflow (100), smart-link (101), insysprog (102), dhcp-server (103), job (104), dsnoopv6 (105), dipldv6 (106), servicetunnel (107), tr069 (108), http (109), vxlantunnel (110), bpdu (111), byod-redirect (112), dldp (113), macsec (114), acct (115), tls (116), ripng (117), arpthrottle (120), ndsnoop (122), ntp (123), ipsla (124), psDetect (125), mdns (126), mvrp (127), rip (128), bfd (129), lldpmad (130), captive-portal (131), profile-manager (132), vsf (133), tunneledNode (134), amp-server (135), activate (136), central (137), ztpIpsec (138), greTunnel (139), userTnode (140), vlanMad (141), ---------------------- -- internalRsvdID (142) -- Add new system Id above internalRsvdID(142) ---------------------- cfgRestore (143), devOnboard (144), httpProxy (145), dfp (146), authOrder (147), caDownload (148), estc (149) } HpicfSyslogOriginId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the origin identifier of syslog message. " SYNTAX INTEGER { ip-address (1), hostname (2), none (3) } -- hpicfSyslogMIB - the main groups -- ------------------------------------------------------------- hpicfSyslogNotifications OBJECT IDENTIFIER ::= { hpicfSyslogMIB 0 } hpicfSyslogObjects OBJECT IDENTIFIER ::= { hpicfSyslogMIB 1 } hpicfSyslogConformance OBJECT IDENTIFIER ::= { hpicfSyslogMIB 3 } -- ------------------------------------------------------------- -- syslog application configuration info table -- ------------------------------------------------------------- hpicfSyslogControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent. " ::= { hpicfSyslogObjects 1 } hpicfSyslogControlEntry OBJECT-TYPE SYNTAX HpicfSyslogControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration parameters pertaining to a Syslog application. " INDEX { hpicfSyslogControlIndex } ::= { hpicfSyslogControlTable 1 } HpicfSyslogControlEntry ::= SEQUENCE { hpicfSyslogControlIndex Integer32, hpicfSyslogControlDescr SnmpAdminString, hpicfSyslogControlBindAddrType InetAddressType, hpicfSyslogControlBindAddr InetAddress, hpicfSyslogControlRowStatus RowStatus, hpicfSyslogControlBindAddrIsOobm TruthValue, hpicfSyslogControlSmmLog INTEGER, hpicfSyslogControlTransportProtocol INTEGER, hpicfSyslogControlDestinationPort InetPortNumber, hpicfSyslogControlFilterName SnmpAdminString } hpicfSyslogControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index that uniquely identifies the Syslog application in the hpicfSyslogControlTable. The value of the index for a Syslog application may not be the same across system reboots. Users and applications will need to determine the index of a Syslog application after system reboots. Initial implementation allows integers (1..6). " ::= { hpicfSyslogControlEntry 1 } hpicfSyslogControlDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A user definable description of the Syslog application. This description could be used by Syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations. " ::= { hpicfSyslogControlEntry 2 } hpicfSyslogControlBindAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported. " ::= { hpicfSyslogControlEntry 3 } hpicfSyslogControlBindAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The specific address the Syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object. " ::= { hpicfSyslogControlEntry 4 } hpicfSyslogControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'. " ::= { hpicfSyslogControlEntry 5 } hpicfSyslogControlBindAddrIsOobm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the specific address to which Syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device. " DEFVAL {false} ::= { hpicfSyslogControlEntry 6 } hpicfSyslogControlSmmLog OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the Syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the Syslog server. By default, this is disabled." DEFVAL { disabled } ::= { hpicfSyslogControlEntry 7 } hpicfSyslogControlTransportProtocol OBJECT-TYPE SYNTAX INTEGER { udp (1), tcp (2), tls (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The transport protocol used for the connection to the Syslog server associated with this row. The default value is UDP." DEFVAL { udp } ::= { hpicfSyslogControlEntry 8 } hpicfSyslogControlDestinationPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The socket port used by the transport protocol to connect to the Syslog server associated with this row. The default Syslog port for UDP is 514, for TCP is 1470, and for TLS is 6514." ::= { hpicfSyslogControlEntry 9 } hpicfSyslogControlFilterName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The filter Name connected to the Syslog server." ::= { hpicfSyslogControlEntry 10 } -- ------------------------------------------------------------- -- hpicfSyslogOperations -- ------------------------------------------------------------- hpicfSyslogOperations OBJECT IDENTIFIER ::= { hpicfSyslogObjects 2 } hpicfSyslogOperationsMsgsTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages transmitted by the Syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. " ::= { hpicfSyslogOperations 1 } hpicfSyslogOperationsMsgsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that could not be queued for transmission by the Syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. " ::= { hpicfSyslogOperations 2 } hpicfSyslogOperationsLastMsgTransmittedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this Syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 3 } hpicfSyslogOperationsStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this Syslog application was started. " ::= { hpicfSyslogOperations 4 } hpicfSyslogOperationsLastError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the last error related to sending a Syslog message that was encountered by this Syslog application. If no error has been encountered by this Syslog application then the value of this object will be a zero-length string. If no error has been encountered by this Syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string. " ::= { hpicfSyslogOperations 5 } hpicfSyslogOperationsLastErrorTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last error was encountered. If no error has been encountered by this Syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 6 } hpicfSyslogOperationsCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this Syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 7 } hpicfSyslogOperationsStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), started (2), suspended(3), stopped (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the Syslog application. " DEFVAL { unknown } ::= { hpicfSyslogOperations 8 } -- ------------------------------------------------------------- -- hpicfSyslogPriority -- ------------------------------------------------------------- hpicfSyslogPriority OBJECT IDENTIFIER ::= { hpicfSyslogObjects 3 } hpicfSyslogPriorityFacility OBJECT-TYPE SYNTAX HpicfSyslogFacility MAX-ACCESS read-write STATUS current DESCRIPTION "The facility value of this entry. This value will be returned in all Syslog message, regardless of the process/daemon that originates the message. " DEFVAL { user } ::= { hpicfSyslogPriority 1 } hpicfSyslogPrioritySeverity OBJECT-TYPE SYNTAX HpicfSyslogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "The severity value of this entry. Used to filter 'event' messages. " DEFVAL { debug } ::= { hpicfSyslogPriority 2 } hpicfSyslogPriorityDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "A textual description of this priority entry. " ::= { hpicfSyslogPriority 3 } hpicfSyslogSystemModule OBJECT-TYPE SYNTAX HpicfSyslogSystemModule MAX-ACCESS read-write STATUS current DESCRIPTION "A system module value of this entry. Used to filter 'event' messages. " DEFVAL { all-pass } ::= { hpicfSyslogPriority 4 } hpicfSyslogOriginId OBJECT-TYPE SYNTAX HpicfSyslogOriginId MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the content of a HOSTNAME field in the HEADER of a syslog message. This content can be either an IP address, a hostname or none. A value of (1) indicates the IP address of the outgoing interface. A value of (2) indicates the hostname of the device. A value of (3) indicates NILVALUE. Here, NILVALUE is defined as '-'. " DEFVAL { ip-address } ::= { hpicfSyslogPriority 5 } hpicfSyslogPrefixString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-write STATUS current DESCRIPTION "A user definable string identifier to be added to the messages. This string could be used by the Syslog management applications or users to classify and group entries." ::= { hpicfSyslogPriority 6 } -- ------------------------------------------------------------- -- hpicfSyslogStatistics -- ------------------------------------------------------------- hpicfSyslogStatistics OBJECT IDENTIFIER ::= { hpicfSyslogObjects 4 } -- ------------------------------------------------------------- -- hpicfSyslogGeneralStatistics -- ------------------------------------------------------------- hpicfSyslogGeneralStatistics OBJECT IDENTIFIER ::= { hpicfSyslogStatistics 1 } hpicfSyslogGeneralLogSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages sent by the Syslog sender." ::= { hpicfSyslogGeneralStatistics 1 } hpicfSyslogGeneralLogRecv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages received by the Syslog Server." ::= { hpicfSyslogGeneralStatistics 2 } hpicfSyslogGeneralLogRelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages processed by the Syslog relay." ::= { hpicfSyslogGeneralStatistics 3 } hpicfSyslogGeneralSendError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process." ::= { hpicfSyslogGeneralStatistics 4 } hpicfSyslogGeneralLogResend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages re-transmitted successfully." ::= { hpicfSyslogGeneralStatistics 5} hpicfSyslogGeneralResendError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitting the buffered Syslog messages." ::= { hpicfSyslogGeneralStatistics 6} hpicfSyslogGeneralLogBuffered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of buffered Syslog messages that are ready to be transmitted. " ::= { hpicfSyslogGeneralStatistics 7 } -- ------------------------------------------------------------- -- hpicfSyslogSeverityStatistics -- ------------------------------------------------------------- hpicfSyslogSeverityStatistics OBJECT IDENTIFIER ::= { hpicfSyslogStatistics 2 } -- ------------------------------------------------------------- -- syslog severity counter info table -- ------------------------------------------------------------- hpicfSyslogSeverityCounterInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogSeverityCounterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table containing the Syslog severity statistics counter value." ::= { hpicfSyslogSeverityStatistics 1 } hpicfSyslogSeverityCounterInfoEntry OBJECT-TYPE SYNTAX HpicfSyslogSeverityCounterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The configuration parameters pertaining to a Syslog severity statistics." INDEX { hpicfSyslogSeverityTypeIndex } ::= { hpicfSyslogSeverityCounterInfoTable 1 } HpicfSyslogSeverityCounterInfoEntry ::= SEQUENCE { hpicfSyslogSeverityTypeIndex Integer32, hpicfSyslogSeverityType HpicfSyslogSeverity, hpicfSyslogSeverityCounter Counter32 } hpicfSyslogSeverityTypeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Index that uniquely identifies the Syslog severity type." ::= { hpicfSyslogSeverityCounterInfoEntry 1 } hpicfSyslogSeverityType OBJECT-TYPE SYNTAX HpicfSyslogSeverity MAX-ACCESS read-only STATUS current DESCRIPTION " The severity type for all the Syslog messages." ::= { hpicfSyslogSeverityCounterInfoEntry 2 } hpicfSyslogSeverityCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages transmitted per severity." ::= { hpicfSyslogSeverityCounterInfoEntry 3 } -- ------------------------------------------------------------- -- hpicfSyslogFacilityStatistics -- ------------------------------------------------------------- hpicfSyslogFacilityStatistics OBJECT IDENTIFIER ::= { hpicfSyslogStatistics 3 } -- ------------------------------------------------------------- -- syslog facility counter info table -- ------------------------------------------------------------- hpicfSyslogFacilityCounterInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogFacilityCounterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the Syslog facility statistics counter values." ::= { hpicfSyslogFacilityStatistics 1 } hpicfSyslogFacilityCounterInfoEntry OBJECT-TYPE SYNTAX HpicfSyslogFacilityCounterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration parameters pertaining to a Syslog facility statistics." INDEX { hpicfSyslogfacilityCounterIndex } ::= { hpicfSyslogFacilityCounterInfoTable 1 } HpicfSyslogFacilityCounterInfoEntry ::= SEQUENCE { hpicfSyslogfacilityCounterIndex Integer32, hpicfSyslogfacilityType HpicfSyslogFacility , hpicfSyslogfacilityCounter Counter32 } hpicfSyslogfacilityCounterIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Index that uniquely identifies the Syslog facility." ::= { hpicfSyslogFacilityCounterInfoEntry 1 } hpicfSyslogfacilityType OBJECT-TYPE SYNTAX HpicfSyslogFacility MAX-ACCESS read-only STATUS current DESCRIPTION " The facility type for all the Syslog messages." ::= { hpicfSyslogFacilityCounterInfoEntry 2 } hpicfSyslogfacilityCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of Syslog messages transmitted per facilty." ::= { hpicfSyslogFacilityCounterInfoEntry 3 } hpicfSyslogLogMsgOptions OBJECT IDENTIFIER ::= { hpicfSyslogObjects 5 } hpicfSyslogClearLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to TRUE will erase all event log messages. This object always return FALSE when read." ::= { hpicfSyslogLogMsgOptions 1 } hpicfSyslogSecClearLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to TRUE will erase all security-related log messages. This object always return FALSE when read." ::= { hpicfSyslogLogMsgOptions 2 } hpicfSyslogCmdClearLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to TRUE will erase all command-related log messages. This object always returns FALSE when it is read." ::= { hpicfSyslogLogMsgOptions 3 } ------------------------------------------------------------------- hpicfSyslogServerStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogServerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the statistical information pertaining to each Syslog server indexed by hpicfSyslogControlIndex. " ::= { hpicfSyslogObjects 6 } hpicfSyslogServerStatisticsEntry OBJECT-TYPE SYNTAX HpicfSyslogServerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration parameters pertaining to a Syslog application. " INDEX { hpicfSyslogControlIndex } ::= { hpicfSyslogServerStatisticsTable 1 } HpicfSyslogServerStatisticsEntry ::= SEQUENCE { hpicfSyslogServerLogSent Counter32, hpicfSyslogServerLogRecv Counter32, hpicfSyslogServerLogRelay Counter32, hpicfSyslogServerSendError Counter32, hpicfSyslogServerLogResend Counter32, hpicfSyslogServerResendError Counter32, hpicfSyslogServerLogBuffered Counter32 } hpicfSyslogServerLogSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages sent by the Syslog sender." ::= { hpicfSyslogServerStatisticsEntry 1 } hpicfSyslogServerLogRecv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages received by the Syslog Server." ::= { hpicfSyslogServerStatisticsEntry 2 } hpicfSyslogServerLogRelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages processed by the Syslog relay." ::= { hpicfSyslogServerStatisticsEntry 3 } hpicfSyslogServerSendError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process." ::= { hpicfSyslogServerStatisticsEntry 4 } hpicfSyslogServerLogResend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages re-transmitted successfully." ::= { hpicfSyslogServerStatisticsEntry 5} hpicfSyslogServerResendError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitting the buffered Syslog messages." ::= { hpicfSyslogServerStatisticsEntry 6} hpicfSyslogServerLogBuffered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of buffered Syslog messages that are ready to be transmitted. " ::= { hpicfSyslogServerStatisticsEntry 7 } -- ------------------------------------------------------------- -- hpicfSyslogAlerts -- ------------------------------------------------------------- hpicfSyslogAlerts OBJECT IDENTIFIER ::= { hpicfSyslogObjects 7 } hpicfSyslogAlertsTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogAlertsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries containing configuration information for transmitting alerts in Syslog messages." ::= { hpicfSyslogAlerts 1 } hpicfSyslogAlertsEntry OBJECT-TYPE SYNTAX HpicfSyslogAlertsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the 'hpicfSyslogAlertsTable'." INDEX { hpicfSyslogAlertIndex } ::= { hpicfSyslogAlertsTable 1 } HpicfSyslogAlertsEntry ::= SEQUENCE { hpicfSyslogAlertIndex INTEGER, hpicfSyslogAlertAdminStatus INTEGER, hpicfSyslogAlertTransmitInterval Unsigned32 } hpicfSyslogAlertIndex OBJECT-TYPE SYNTAX INTEGER { runningCfgChg(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch's running configuration." ::= { hpicfSyslogAlertsEntry 1 } hpicfSyslogAlertAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Syslog application is permitted to generate given type of alerts in transmitted Syslog messages. Default is disabled." DEFVAL { 2 } ::= { hpicfSyslogAlertsEntry 2 } hpicfSyslogAlertTransmitInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the transmission interval in seconds for sending alerts in Syslog messages. Only one Syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit for alerts transmission." DEFVAL { 0 } ::= { hpicfSyslogAlertsEntry 3} -- ------------------------------------------------------------- -- hpicfSyslogLogging -- ------------------------------------------------------------- hpicfSyslogLogging OBJECT IDENTIFIER ::= { hpicfSyslogObjects 8 } hpicfSyslogCommandLogging OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure whether switch should log user entered commands. If this is set, commands are locally logged, else the commands are not logged. By default, this functionality is disabled." DEFVAL { false } ::= { hpicfSyslogLogging 1} -- ------------------------------------------------------------- -- Notification Information -- ------------------------------------------------------------- hpicfSyslogStatusChanged NOTIFICATION-TYPE OBJECTS { hpicfSyslogControlIndex, hpicfSyslogControlDescr, hpicfSyslogControlBindAddrType, hpicfSyslogControlBindAddr, hpicfSyslogControlRowStatus, hpicfSyslogPriorityDescr, hpicfSyslogPrioritySeverity, hpicfSyslogPriorityFacility, hpicfSyslogSystemModule, hpicfSyslogOperationsStatus } STATUS current DESCRIPTION "This notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSyslogOperationsStatus is ''started'' ]. When the last server address is removed, the Syslog application stops [hpicfSyslogOperationsStatus is ''stopped'']. The value of hpicfSyslogOperationsStatus will be the new status of the Syslog application after the change. Another example, when a server address is added, a notification is sent indicating the index used to store the row information, as well as the address type, the address itself, the description if given , and the row status. " ::= { hpicfSyslogNotifications 1 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- hpicfSyslogGroups OBJECT IDENTIFIER ::= { hpicfSyslogConformance 1 } hpicfSyslogCompliances OBJECT IDENTIFIER ::= { hpicfSyslogConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- hpicfSyslogOperationsGroup OBJECT-GROUP OBJECTS { hpicfSyslogOperationsMsgsTransmitted, hpicfSyslogOperationsMsgsDropped, hpicfSyslogOperationsLastMsgTransmittedTime, hpicfSyslogOperationsStartTime, hpicfSyslogOperationsLastError, hpicfSyslogOperationsLastErrorTime, hpicfSyslogOperationsCounterDiscontinuityTime, hpicfSyslogOperationsStatus } STATUS current DESCRIPTION "A collection of objects providing message related statistics." ::= { hpicfSyslogGroups 1} hpicfSyslogControlGroup OBJECT-GROUP OBJECTS { hpicfSyslogControlDescr, hpicfSyslogControlBindAddrType, hpicfSyslogControlBindAddr, hpicfSyslogControlRowStatus } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the Syslog applications. " ::= { hpicfSyslogGroups 2} hpicfSyslogPriorityGroup OBJECT-GROUP OBJECTS { hpicfSyslogPriorityDescr } STATUS current DESCRIPTION "A collection of objects representing the priority groupings of hpicfSyslog messages. " ::= { hpicfSyslogGroups 3} hpicfSyslogNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfSyslogStatusChanged } STATUS current DESCRIPTION "A collection of notifications about the operational state of a Syslog application. " ::= { hpicfSyslogGroups 5} hpicfSyslogControlGroupOobm OBJECT-GROUP OBJECTS { hpicfSyslogControlBindAddr, hpicfSyslogControlBindAddrIsOobm } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the OOBM aware Syslog applications. " ::= { hpicfSyslogGroups 6} hpicfSyslogGeneralStatisticsGroup OBJECT-GROUP OBJECTS { hpicfSyslogGeneralLogSent, hpicfSyslogGeneralLogRecv, hpicfSyslogGeneralLogRelay, hpicfSyslogGeneralSendError, hpicfSyslogGeneralLogResend, hpicfSyslogGeneralResendError, hpicfSyslogGeneralLogBuffered } STATUS current DESCRIPTION "A collection of objects representing the general statistics counter information." ::= { hpicfSyslogGroups 7} hpicfSyslogSeverityStatisticsGroup OBJECT-GROUP OBJECTS { hpicfSyslogSeverityType, hpicfSyslogSeverityCounter } STATUS current DESCRIPTION "A collection of objects representing the severity statistics counter information." ::= { hpicfSyslogGroups 8} hpicfSyslogFacilityStatisticsGroup OBJECT-GROUP OBJECTS { hpicfSyslogfacilityType, hpicfSyslogfacilityCounter } STATUS current DESCRIPTION "A collection of objects representing the facility statistics counter information." ::= { hpicfSyslogGroups 9} hpicfSyslogControlGroupSmm OBJECT-GROUP OBJECTS { hpicfSyslogControlBindAddr, hpicfSyslogControlSmmLog } STATUS current DESCRIPTION "A collection of objects representing the log message for the standby module." ::= { hpicfSyslogGroups 10} hpicfSyslogLogMsgOptionsGroup OBJECT-GROUP OBJECTS { hpicfSyslogClearLog } STATUS deprecated DESCRIPTION "A collection of objects representing the log message information." ::= { hpicfSyslogGroups 11} hpicfSyslogControlTransportGroup OBJECT-GROUP OBJECTS { hpicfSyslogControlTransportProtocol, hpicfSyslogControlDestinationPort } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the transport applications. " ::= { hpicfSyslogGroups 12} hpicfSyslogServerStatisticsGroup OBJECT-GROUP OBJECTS { hpicfSyslogServerLogSent, hpicfSyslogServerLogRecv, hpicfSyslogServerLogRelay, hpicfSyslogServerSendError, hpicfSyslogServerLogResend, hpicfSyslogServerResendError, hpicfSyslogServerLogBuffered } STATUS current DESCRIPTION "A collection of objects representing the server specific statistics counter information." ::= { hpicfSyslogGroups 13} hpicfSyslogPriorityGroup1 OBJECT-GROUP OBJECTS { hpicfSyslogPriorityFacility, hpicfSyslogPrioritySeverity, hpicfSyslogSystemModule } STATUS current DESCRIPTION "A collection of object for Syslog priority." ::= { hpicfSyslogGroups 14 } hpicfSyslogAlertsGroup OBJECT-GROUP OBJECTS { hpicfSyslogAlertAdminStatus, hpicfSyslogAlertTransmitInterval } STATUS current DESCRIPTION "A collection of objects representing Syslog alerts information." ::= { hpicfSyslogGroups 15} hpicfSyslogOriginIdGroup1 OBJECT-GROUP OBJECTS { hpicfSyslogOriginId } STATUS current DESCRIPTION "An object for syslog origin ID." ::= { hpicfSyslogGroups 16 } hpicfSyslogLogMsgOptionsGroup1 OBJECT-GROUP OBJECTS { hpicfSyslogClearLog, hpicfSyslogSecClearLog } STATUS deprecated DESCRIPTION "A collection of objects representing the log message information." ::= { hpicfSyslogGroups 17} hpicfSyslogCommandLoggingGroup1 OBJECT-GROUP OBJECTS { hpicfSyslogCommandLogging } STATUS deprecated DESCRIPTION "A collection of objects for local command logging." ::= { hpicfSyslogGroups 18 } hpicfSyslogLogMsgOptionsGroup2 OBJECT-GROUP OBJECTS { hpicfSyslogClearLog, hpicfSyslogSecClearLog, hpicfSyslogCmdClearLog } STATUS current DESCRIPTION "A collection of objects representing the log message information." ::= { hpicfSyslogGroups 19} hpicfSyslogControlFilterNameGroup OBJECT-GROUP OBJECTS { hpicfSyslogControlFilterName } STATUS current DESCRIPTION "Objects representing the filter name." ::= { hpicfSyslogGroups 20} hpicfSyslogPrefixStringGroup1 OBJECT-GROUP OBJECTS { hpicfSyslogPrefixString } STATUS current DESCRIPTION "Object representing the prefix string." ::= { hpicfSyslogGroups 23} -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- hpicfSyslogFullCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup, hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } ::= { hpicfSyslogCompliances 1 } hpicfSyslogFullCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } ::= { hpicfSyslogCompliances 2 } hpicfSyslogReadOnlyCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the Syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup, hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } OBJECT hpicfSyslogControlDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required. " ::= { hpicfSyslogCompliances 4 } hpicfSyslogReadOnlyCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } OBJECT hpicfSyslogControlDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogPriorityDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " --OBJECT hpicfSyslogPriorityDestinationIndex --MIN-ACCESS read-only --DESCRIPTION --"Write access is not required. -- " ::= { hpicfSyslogCompliances 5 } hpicfSyslogNotificationCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a Syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup } ::= { hpicfSyslogCompliances 7 } hpicfSyslogFullComplianceOobm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog server configuration with support for OOBM. " MODULE -- this module GROUP hpicfSyslogControlGroupOobm DESCRIPTION "This group is optional if there is no OOBM port on device." ::= { hpicfSyslogCompliances 8 } hpicfSyslogStatisticsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the Syslog statistics." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogGeneralStatisticsGroup, hpicfSyslogSeverityStatisticsGroup, hpicfSyslogFacilityStatisticsGroup } ::= { hpicfSyslogCompliances 9 } hpicfSyslogSmmLogMsgCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for Syslog log messages for standby module." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogControlGroupSmm, hpicfSyslogLogMsgOptionsGroup } ::= { hpicfSyslogCompliances 10 } hpicfSyslogTransportCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog transport ." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogControlTransportGroup } ::= { hpicfSyslogCompliances 11 } hpicfSyslogPriorityCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog priority ." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogPriorityGroup1 } ::= { hpicfSyslogCompliances 12 } hpicfSyslogServerStatisticsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for syslog server statistics ." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogServerStatisticsGroup } ::= { hpicfSyslogCompliances 13 } hpicfSyslogAlertsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog alerts." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogAlertsGroup } ::= { hpicfSyslogCompliances 14 } hpicfSyslogOriginIdCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for syslog origin id." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogOriginIdGroup1 } ::= { hpicfSyslogCompliances 15 } hpicfSyslogSmmLogMsgCompliance1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for Syslog log messages for standby module." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogControlGroupSmm, hpicfSyslogLogMsgOptionsGroup1 } ::= { hpicfSyslogCompliances 16 } hpicfSyslogCommandLoggingCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for Syslog command logging ." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogCommandLoggingGroup1 } ::= { hpicfSyslogCompliances 17 } hpicfSyslogSmmLogMsgCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog log messages for standby module." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogControlGroupSmm, hpicfSyslogLogMsgOptionsGroup2 } ::= { hpicfSyslogCompliances 18 } hpicfSyslogTransportFilterNameCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog Filter Name ." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogControlFilterNameGroup } ::= { hpicfSyslogCompliances 19 } hpicfSyslogPrefixStringCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Syslog Prefix String." MODULE -- this module MANDATORY-GROUPS { hpicfSyslogPrefixStringGroup1 } ::= { hpicfSyslogCompliances 22 } END