HP-ICF-RELOAD-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF entPhysicalIndex FROM ENTITY-MIB hpicfBasic FROM HP-ICF-BASIC; hpicfReloadMIB MODULE-IDENTITY LAST-UPDATED "200912030000Z" -- December 3, 2009 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line." REVISION "200912030000Z" -- December 3, 2009 DESCRIPTION "Added object hpicfReloadTable " REVISION "200910010000Z" -- October 1, 2009 DESCRIPTION "Added objects hpicfReloadState, hpicfReloadAfter, hpicfReloadAt" ::= { hpicfBasic 20 } -- hpicfReloadMIB - the main groups -- ------------------------------------------------------------- hpicfReloadObjects OBJECT IDENTIFIER ::= { hpicfReloadMIB 1 } hpicfEntityReload OBJECT IDENTIFIER ::= { hpicfReloadMIB 2 } hpicfReloadConformance OBJECT IDENTIFIER ::= { hpicfReloadMIB 3 } -- RELOAD MIB Textual Conventions -- ******************************************************************** ReloadControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value which provides an indication of the reload control." SYNTAX INTEGER { reloadSlotNone(1), fullPowerCycleReload(2) } -- The HP ICF Reload Group hpicfReloadState OBJECT-TYPE SYNTAX INTEGER{ notScheduled(1), reloadAfter(2), reloadAt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1). NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively." ::= { hpicfReloadObjects 1 } hpicfReloadAfter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the time in seconds after which reload will occur.If no reload is scheduled it returns -1. To schedule a reload/reboot, time in seconds is entered and 0 for immediate reload. When hpicfReloadAfter is scheduled the state of hpicfReloadState is changed to reloadAfter automatically. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAfter is scheduled." ::= { hpicfReloadObjects 2 } hpicfReloadAt OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the time and date at which reload will occur. To schedule a reload in the future, the time and date at which reload needs to occur should be given. When hpicfReloadAt is scheduled it will change the state of hpicfReloadState to reloadAt. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAt is scheduled." ::= { hpicfReloadObjects 3 } -- ******************************************************************** hpicfReloadTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a row for different entities and shows the control operation and the latest reload time for that entity." ::= { hpicfEntityReload 2 } hpicfReloadEntry OBJECT-TYPE SYNTAX HpicfReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about Reload table." INDEX { entPhysicalIndex } ::= { hpicfReloadTable 1 } HpicfReloadEntry ::= SEQUENCE { hpicfReloadControl ReloadControl, hpicfReloadDateTime DateAndTime } hpicfReloadControl OBJECT-TYPE SYNTAX ReloadControl MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the control action for this entity" ::= { hpicfReloadEntry 1 } hpicfReloadDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the time and date at which the last reload will occured" ::= { hpicfReloadEntry 2 } -- ******************************************************************** -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- hpicfReloadGroups OBJECT IDENTIFIER ::= { hpicfReloadConformance 1 } hpicfReloadCompliances OBJECT IDENTIFIER ::= { hpicfReloadConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- hpicfReloadGroup OBJECT-GROUP OBJECTS { hpicfReloadState, hpicfReloadAfter, hpicfReloadAt, hpicfReloadControl, hpicfReloadDateTime } STATUS current DESCRIPTION "A collection of objects for reload command." ::= { hpicfReloadGroups 1} -- -------------------------------------------------------------- -- Compliance statements for hpicfReloadMIB Group -- -------------------------------------------------------------- hpicfReloadFullCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Reload application. " MODULE -- this module MANDATORY-GROUPS { hpicfReloadGroup } ::= { hpicfReloadCompliances 1 } hpicfReloadFullCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. " MODULE -- this module MANDATORY-GROUPS { hpicfReloadGroup } ::= { hpicfReloadCompliances 2 } hpicfReloadReadOnlyCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the hpicfReload MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfReloadGroup } OBJECT hpicfReloadAt MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfReloadAfter MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfReloadState MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfReloadControl MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfReloadDateTime MIN-ACCESS read-only DESCRIPTION "Write access is not required. " ::= { hpicfReloadCompliances 3 } END