-- ***************************************************************** -- HP-ICF-DLDP-MIB : DLDP MIB file -- Copyright (c) 2014 Hewlett-Packard Development Company, L.P. -- All Rights Reserved. -- ***************************************************************** HP-ICF-DLDP-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MacAddress, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB hpSwitch FROM HP-ICF-OID; hpicfDldpMIB MODULE-IDENTITY LAST-UPDATED "201403070000Z" --March 07, 2014 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes objects to configure the Device Link Detection (DLDP) feature." REVISION "201403070000Z" -- March 07 ,2014 DESCRIPTION "Initial revision." ::= { hpSwitch 108 } -- --- MIB objects -- hpicfDldpNotifications OBJECT IDENTIFIER ::= {hpicfDldpMIB 0} hpicfDldpConfigurationObjects OBJECT IDENTIFIER ::= {hpicfDldpMIB 1} hpicfDldpStatisticsObjects OBJECT IDENTIFIER ::= {hpicfDldpMIB 2} hpicfDldpConformance OBJECT IDENTIFIER ::= {hpicfDldpMIB 3} hpicfDldpScalars OBJECT IDENTIFIER ::= {hpicfDldpConfigurationObjects 1} hpicfDldpScalarStats OBJECT IDENTIFIER ::= {hpicfDldpStatisticsObjects 1} -- scalars objects of DLDP hpicfDldpGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the status of Device Link Detection Protocol on the device. A value of TRUE enables the DLDP feature on the device. A value of FALSE disables the DLDP feature on the device." ::= { hpicfDldpScalars 1 } hpicfDldpInterval OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the interval(seconds) at which the DLDP packets are advertised." DEFVAL { 5 } ::= { hpicfDldpScalars 2 } hpicfDldpAuthMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), none(2), simple(3), md5(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the authentication mechanism used in DLDP. A value of unknown(1) indicates that the authentication mode cannot be determined. This value cannot be set. A value of none(2) indicates that no authentication mode is selected for DLDP. A value of simple(3) indicates that a clear text password is used for authentication. A value of md5(4) indicates that MD5 encrypted password is used for authentication." DEFVAL { none } ::= { hpicfDldpScalars 3 } hpicfDldpAuthPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the authentication password. To delete a password, set the object to a zero-length octet string." ::= { hpicfDldpScalars 4 } hpicfDldpAuthPasswordEncrypted OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides an encrypted form of the DLDP authentication password. For SET requests, the encrypted value must be obtained from a compatible HP Networking device or generated using the 'encrypt-credentials' CLI command. This object can only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than 'none'." ::= { hpicfDldpScalars 5 } hpicfDldpUniShutdown OBJECT-TYPE SYNTAX INTEGER { unknown(1), auto(2), manual(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the shutdown mode for a port when a unidirectional link is detected. A value of unknown(1) indicates that the shutdown mode cannot be determined. This value cannot be set. A value of auto (2) indicates that the port will be shut down automatically by DLDP after the detection of unidirectional link on that port. A value of manual(3) indicates that the port must be shut down manually after the detection of unidirectional link on that port. When this mode is selected, DLDP generates log and trap messages to prompt the user to shut down the unidirectional port manually." DEFVAL { auto } ::= { hpicfDldpScalars 6 } hpicfDldpDelayDownInterval OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the DelayDown timer for DLDP in seconds. When the status of a DLDP enabled port changes to down, DLDP starts the DelayDown timer. When the DelayDown timer expires, the device removes the corresponding neighbor information from the database. Some devices may only allow a more restricted range of values 1..5. The default value is 1 second." DEFVAL { 1 } ::= { hpicfDldpScalars 7 } -- port config table hpicfDldpPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDldpPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all ports that support DLDP." ::= { hpicfDldpConfigurationObjects 2 } hpicfDldpPortConfigEntry OBJECT-TYPE SYNTAX HpicfDldpPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry describes a port that supports DLDP." INDEX { ifIndex } ::= { hpicfDldpPortConfigTable 1 } HpicfDldpPortConfigEntry ::= SEQUENCE { hpicfDldpPortEnable TruthValue } hpicfDldpPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the status of DLDP on ports. A value of TRUE indicates that DLDP is enabled on the port. A value of FALSE indicates that DLDP is disabled on the port." ::= { hpicfDldpPortConfigEntry 1 } -- port status table hpicfDldpPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDldpPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the information about all the DLDP enabled ports." ::= { hpicfDldpConfigurationObjects 3 } hpicfDldpPortStatusEntry OBJECT-TYPE SYNTAX HpicfDldpPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table that provides the information about a single DLDP enabled port." INDEX { ifIndex } ::= { hpicfDldpPortStatusTable 1 } HpicfDldpPortStatusEntry ::= SEQUENCE { hpicfDldpPortOperStatus INTEGER, hpicfDldpPortLinkStatus INTEGER } hpicfDldpPortOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), initial(2), inactive(3), unidirectional(4), bidirectional(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the operating status of DLDP on ports. A value of unknown (1) indicates that the operating status of DLDP cannot be determined. A value of initial (2) indicates that DLDP is enabled on port but disabled globally. A value of inactive (3) indicates that DLDP is enabled but the physical status of the port is down. A value of unidirectional (4) indicates that a unidirectional link is detected on the port. A value of bidirectional (5) indicates that a bidirectional link is detected on the port." ::= { hpicfDldpPortStatusEntry 1 } hpicfDldpPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), down(2), up(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the link status of DLDP enabled ports. A value of unknown (1) indicates that the status of the link cannot be determined. A value of down (2) indicates that the status of the link is down. A value of up (3) indicates that the status of the link is up." ::= { hpicfDldpPortStatusEntry 2 } -- port statistics table . hpicfDldpPortStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDldpPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the statistics of DLDP ports." ::= { hpicfDldpConfigurationObjects 4 } hpicfDldpPortStatEntry OBJECT-TYPE SYNTAX HpicfDldpPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table that provides the statistics of a single DLDP port." INDEX { ifIndex } ::= { hpicfDldpPortStatTable 1 } HpicfDldpPortStatEntry ::= SEQUENCE { hpicfDldpRxPackets Counter64, hpicfDldpTxPackets Counter64, hpicfDldpRxValidPackets Counter64, hpicfDldpRxInvalidPackets Counter64, hpicfDldpAuthFailedPackets Counter64, hpicfDldpStatClear TruthValue } hpicfDldpRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides number of DLDP packets received on the port." ::= { hpicfDldpPortStatEntry 1 } hpicfDldpTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides number of DLDP packets sent on the port." ::= { hpicfDldpPortStatEntry 2 } hpicfDldpRxValidPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides number of valid DLDP packets received on the port." ::= { hpicfDldpPortStatEntry 3 } hpicfDldpRxInvalidPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides number of invalid DLDP packets received on the port." ::= { hpicfDldpPortStatEntry 4 } hpicfDldpAuthFailedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides number of DLDP authentication failed packets received on the port." ::= { hpicfDldpPortStatEntry 5 } hpicfDldpStatClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object clears DLDP statistics when set to TRUE. A GET request for this object always returns FALSE." ::= { hpicfDldpPortStatEntry 6 } -- neighbor table hpicfDldpNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDldpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the information about the devices connected on the DLDP enabled ports." ::= { hpicfDldpConfigurationObjects 5 } hpicfDldpNeighborEntry OBJECT-TYPE SYNTAX HpicfDldpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table that provides the information about each neighbor device connected on a DLDP enabled port." INDEX { ifIndex, hpicfDldpNeighborPortId } ::= { hpicfDldpNeighborTable 1 } HpicfDldpNeighborEntry ::= SEQUENCE { hpicfDldpNeighborPortId Integer32, hpicfDldpNeighborBridgeMac MacAddress, hpicfDldpNeighborPortIndex Integer32, hpicfDldpNeighborStatus INTEGER, hpicfDldpNeighborAgingTime Integer32 } hpicfDldpNeighborPortId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the neighbor ID." ::= { hpicfDldpNeighborEntry 1 } hpicfDldpNeighborBridgeMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the bridge MAC address of a neighbor." ::= { hpicfDldpNeighborEntry 2 } hpicfDldpNeighborPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the port index of a neighbor." ::= { hpicfDldpNeighborEntry 3 } hpicfDldpNeighborStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), unconfirmed(2), confirmed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the status of a neighbor. A value of unknown(1) indicates that the status of the neighbor cannot be determined. A value of unconfirmed(2) indicates that the neighbor is connected on a unidirectional link. A value of confirmed(3) indicates that the neighbor is connected on a bidirectional link." ::= { hpicfDldpNeighborEntry 4 } hpicfDldpNeighborAgingTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the aging time of a neighbor. This object returns a value of zero if the neighbor status is unconfirmed or unknown." ::= { hpicfDldpNeighborEntry 5 } -- trap hpicfDldpTrapUniLink NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap is generated when DLDP detects a unidirectional link." ::= { hpicfDldpNotifications 1 } hpicfDldpTrapBidLink NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap is generated when DLDP detects a bidirectional link." ::= { hpicfDldpNotifications 2 } -- conformance information hpicfDldpCompliances OBJECT IDENTIFIER ::= { hpicfDldpConformance 1 } hpicfDldpGroups OBJECT IDENTIFIER ::= { hpicfDldpConformance 2 } hpicfDldpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Dldp MIB." MODULE -- this module MANDATORY-GROUPS { hpicfDldpScalarsGroup, hpicfDldpPortGroup, hpicfDldpNeighborGroup, hpicfDldpStatsGroup, hpicfDldpNotificationGroup } ::= { hpicfDldpCompliances 1 } hpicfDldpScalarsGroup OBJECT-GROUP OBJECTS { hpicfDldpGlobalEnable, hpicfDldpInterval, hpicfDldpAuthMode, hpicfDldpAuthPassword, hpicfDldpAuthPasswordEncrypted, hpicfDldpUniShutdown, hpicfDldpDelayDownInterval } STATUS current DESCRIPTION "The collection of scalr objects providing information about DLDP." ::= { hpicfDldpGroups 1 } hpicfDldpPortGroup OBJECT-GROUP OBJECTS { hpicfDldpPortEnable, hpicfDldpPortOperStatus, hpicfDldpPortLinkStatus } STATUS current DESCRIPTION "The collection of port objects providing information about DLDP." ::= { hpicfDldpGroups 2 } hpicfDldpNeighborGroup OBJECT-GROUP OBJECTS { hpicfDldpNeighborBridgeMac, hpicfDldpNeighborPortIndex, hpicfDldpNeighborStatus, hpicfDldpNeighborAgingTime } STATUS current DESCRIPTION "The collection of neighbor objects providing information about DLDP." ::= { hpicfDldpGroups 3} hpicfDldpStatsGroup OBJECT-GROUP OBJECTS { hpicfDldpRxPackets, hpicfDldpTxPackets, hpicfDldpRxValidPackets, hpicfDldpRxInvalidPackets, hpicfDldpAuthFailedPackets, hpicfDldpStatClear } STATUS current DESCRIPTION "The collection of statistic objects providing information about DLDP." ::= { hpicfDldpGroups 4 } hpicfDldpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfDldpTrapUniLink, hpicfDldpTrapBidLink } STATUS current DESCRIPTION "A collection of trap objects providing information about DLDP." ::= { hpicfDldpGroups 5 } END