--**MOD+*********************************************************************** --* Module: hpicfDSnoopV6.mib --* -- Copyright (C) 2017 Hewlett-Packard Development Company, L.P. --* All Rights Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett Packard Enterprise Development LP. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett Packard Enterprise Development LP. --* --* Purpose: This file contains MIB definition of HP-ICF-DHCPv6-SNOOP-MIB --* --**MOD-*********************************************************************** HP-ICF-DHCPv6-SNOOP-MIB DEFINITIONS ::= BEGIN IMPORTS hpSwitch FROM HP-ICF-OID InetAddressType, InetAddress FROM INET-ADDRESS-MIB VlanIndex FROM Q-BRIDGE-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex FROM IF-MIB VidList FROM HP-ICF-TC OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, RowStatus, MacAddress, DateAndTime FROM SNMPv2-TC hpicfSaviObjectsPortEntry, hpicfSaviObjectsBindingEntry FROM HPICF-SAVI-MIB; hpicfDSnoopV6 MODULE-IDENTITY LAST-UPDATED "201711080000Z" -- Nov 08, 2017 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary objects for managing DHCPV6 Snooping." REVISION "201711080000Z" DESCRIPTION "Importing hpicfSaviObjectsBindingEntry and hpicfSaviObjectsPortEntry from HPICF-SAVI-MIB and augmenting them instead of saviObjectsBindingEntry and saviObjectsPortEntry. Updated hpicfDSnoopV6AuthorizedServerStatus mib to specify not supported row status states." REVISION "201501280000Z" DESCRIPTION "Added hpicfDsnoopV6DatabaseFTPort, hpicfDSnoopV6DatabaseSFTPUsername, hpicfDSnoopV6DatabaseSFTPPassword, hpicfDSnoopV6DatabaseValidateSFTPServer" REVISION "201310060000Z" DESCRIPTION "Changed syntax type for hpicfDSnoopV6VlanEnable from OctetString to Vidlist." REVISION "201304300000Z" DESCRIPTION "Initial Version." ::= { hpSwitch 102} -- -- Node definitions -- hpicfDSnoopV6Notifications OBJECT IDENTIFIER ::= { hpicfDSnoopV6 0 } hpicfDSnoopV6Objects OBJECT IDENTIFIER ::= { hpicfDSnoopV6 1 } hpicfDSnoopV6Config OBJECT IDENTIFIER ::= { hpicfDSnoopV6Objects 1 } hpicfDSnoopV6GlobalCfg OBJECT IDENTIFIER ::= { hpicfDSnoopV6Config 1 } hpicfDSnoopV6Enable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the administrative status of the DHCPv6 Snooping feature. This status must be enabled for DHCPv6 snooping to work." ::= { hpicfDSnoopV6GlobalCfg 1 } hpicfDSnoopV6VlanEnable OBJECT-TYPE SYNTAX VidList MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains vid map for vlans on which DHCPV6 Snooping is enabled. A bit that is on (equal to 1) indicates that DHCPV6 snooping is enabled on corresponding vlan ." ::= { hpicfDSnoopV6GlobalCfg 2 } hpicfDSnoopV6DatabaseFile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "A location to store the lease database or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The permissible character sets and the encoding rules defined in RFC 2396 section 2 apply." ::= { hpicfDSnoopV6GlobalCfg 3 } hpicfDSnoopV6DatabaseWriteDelay OBJECT-TYPE SYNTAX Unsigned32 (15..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " The number of seconds to delay writing the DHCPv6 lease database file after a database change. This allows grouping multiple database changes into a single write. The default value is 300 seconds." ::= { hpicfDSnoopV6GlobalCfg 4 } hpicfDSnoopV6DatabaseWriteTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait for the database file transfer to finish. If file transfer is not over within this period, a file transfer failure message is displayed. To continue trying indefinitely, specify a value of 0. The default value is 300 seconds." ::= { hpicfDSnoopV6GlobalCfg 5 } hpicfDSnoopV6OutOfResourcesTrapCtrl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object provides the operational status of DSNOOPv6 out of resource control trap. The default value is enabled. This notification trap is sent when the number of bindings exceed the maximum limit of 8192 bindings. Configuration of this object requires SNMPv3 authentication." DEFVAL{1} ::= { hpicfDSnoopV6GlobalCfg 6 } hpicfDSnoopV6ErrantReplyTrapCtrl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the operational status of DSNOOPv6 errant repy control trap. The default value is enabled. This notification trap is sent when a DHCPv6 reply packet is received on an untrusted port or from an un-authorized server. Configuration of this object requires SNMPv3 authentication." DEFVAL{enabled} ::= { hpicfDSnoopV6GlobalCfg 7 } hpicfDSnoopV6DatabaseFTPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP." ::= { hpicfDSnoopV6GlobalCfg 8 } hpicfDSnoopV6DatabaseSFTPUsername OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "A location to store the Username of the SFTP Server. The default value of username is root." ::= { hpicfDSnoopV6GlobalCfg 9 } hpicfDSnoopV6DatabaseSFTPPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "A location to store the Password of the SFTP Server." ::= { hpicfDSnoopV6GlobalCfg 10 } hpicfDSnoopV6DatabaseValidateSFTPServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public key is accepted automatically." ::= { hpicfDSnoopV6GlobalCfg 11 } hpicfDSnoopV6RateLimit OBJECT-TYPE SYNTAX Unsigned32 (100..500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the DHCPV6 packet transfer rate. This rate limit is applicable only when DHCPV6 snooping is enabled. The default rate is 100 packets per sec." DEFVAL { 100 } ::= { hpicfDSnoopV6GlobalCfg 12 } hpicfDSnoopV6AuthorizedServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDSnoopV6AuthorizedServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of authorized DHCP server addresses." ::= { hpicfDSnoopV6Config 2 } -- 1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1 hpicfDSnoopV6AuthorizedServerEntry OBJECT-TYPE SYNTAX HpicfDSnoopV6AuthorizedServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table, containing the address of a single authorized DHCP server." INDEX { hpicfDSnoopV6AuthorizedServerAddrType, hpicfDSnoopV6AuthorizedServerAddress } ::= { hpicfDSnoopV6AuthorizedServerTable 1 } HpicfDSnoopV6AuthorizedServerEntry ::= SEQUENCE { hpicfDSnoopV6AuthorizedServerAddrType InetAddressType, hpicfDSnoopV6AuthorizedServerAddress InetAddress, hpicfDSnoopV6AuthorizedServerStatus RowStatus } -- 1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.1 hpicfDSnoopV6AuthorizedServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of authorized DHCPv6 server." ::= { hpicfDSnoopV6AuthorizedServerEntry 1 } -- 1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.2 hpicfDSnoopV6AuthorizedServerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(16 |20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of a known valid DHCP server. The type of address contained in this object is indicated by hpicfDSnoopV6AuthorizedServerAddrType. To allow a server packet to be forwarded to a client, it must be received on a trusted port from a server address in this table. If this table is empty, all addresses are trusted. Note that this feature compares the source address of the received DHCPv6 server packet against the addresses in this table. Therefore, this table must contain trusted server addresses and trusted DHCPv6 relays that a server packet may be relayed through." ::= { hpicfDSnoopV6AuthorizedServerEntry 2 } -- 1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.3 hpicfDSnoopV6AuthorizedServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this DHCP server address entry. Only 'active' entries are used when validating DHCP server packets. Row statuses createAndWait(5), notReady(3) and notInService(2) are not supported." ::= {hpicfDSnoopV6AuthorizedServerEntry 3 } hpicfDSnoopV6GlobalStats OBJECT IDENTIFIER ::= { hpicfDSnoopV6Objects 2 } hpicfDSnoopV6CSForwards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 packets that were successfully forwarded from untrusted client ports towards trusted DHCPv6 server ports." ::= { hpicfDSnoopV6GlobalStats 1 } hpicfDSnoopV6CSMACMismatches OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 client packets that were discarded due to MAC verification check failure." ::= { hpicfDSnoopV6GlobalStats 2 } hpicfDSnoopV6CSBadReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 client packets that were discarded because they were RELEASE packets received on a port different from the port that the address was leased to." ::= { hpicfDSnoopV6GlobalStats 3 } hpicfDSnoopV6CSUntrustedDestPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 client unicast packets that were discarded because they were destined to untrusted ports." ::= { hpicfDSnoopV6GlobalStats 4 } hpicfDSnoopV6SCForwards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 packets that were successfully forwarded from trusted DHCPv6 server ports to untrusted client ports." ::= { hpicfDSnoopV6GlobalStats 5 } hpicfDSnoopV6SCUntrustedPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 server packets that were dropped because they were received on untrusted ports." ::= { hpicfDSnoopV6GlobalStats 6 } hpicfDSnoopV6SCRelayReplyUntrustedPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of relay reply packets that were dropped by the switch because they were received on untrusted ports." ::= { hpicfDSnoopV6GlobalStats 7 } hpicfDSnoopV6SCUnauthorizedServers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of snooped DHCPv6 server packets that were discarded because they were received from unauthorized DHCPv6 server" ::= { hpicfDSnoopV6GlobalStats 8 } hpicfDSnoopV6DBFileWriteAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of attempts that have been made to write the DHCPv6 lease database to a configured file location." ::= { hpicfDSnoopV6GlobalStats 9 } hpicfDSnoopV6DBFileWriteFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times that an attempt to write the DHCPv6 lease database to a configured file location has failed." ::= { hpicfDSnoopV6GlobalStats 10 } hpicfDSnoopV6DBFileReadStatus OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), inProgress(2), succeeded(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object indicates whether the DHCPv6 lease database from configured location is loaded successfully after the last reboot." ::= { hpicfDSnoopV6GlobalStats 11 } hpicfDSnoopV6DBFileWriteStatus OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), delaying(2), inProgress(3), succeeded(4), failed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the DHCPv6 lease database is currently synchronized with the the configured file server. 'notConfigured' means that the switch is not configured with a server location. 'delaying' means the switch is waiting for the write delay to expire before writing the current database. 'inProgress' means that a lease database transfer is active. 'succeeded' means that all leases in our database have been written to the server. 'failed' means that the last attempt to write our lease database failed." ::= { hpicfDSnoopV6GlobalStats 12 } hpicfDSnoopV6DBFileLastWriteTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " Time at which the switch last successfully wrote the lease database to the server. This object contains a value of all zeroes if lease database is not written since the last reboot." ::= { hpicfDSnoopV6GlobalStats 13 } hpicfDSnoopV6MaxbindPktsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the total number of DHCPv6 snooping packets dropped by the switch. A switch drops the DHCPv6 snooping packets on a port when the port exceeds maximum binding limit configured on it." ::= { hpicfDSnoopV6GlobalStats 14 } hpicfDSnoopV6ClearStatsOptions OBJECT IDENTIFIER ::= {hpicfDSnoopV6Objects 3} hpicfDSnoopV6ClearStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object clears the DSNOOPv6 statistics when set to TRUE. A write operation of FALSE leads to a no operation and a get request for this object always returns FALSE." ::= { hpicfDSnoopV6ClearStatsOptions 1 } -- AUGMENT hpicfSaviObjectsPortTable for max_bindings hpicfDSnoopV6PortMaxBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDSnoopV6PortMaxBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the maximum binding information of port." ::= { hpicfDSnoopV6Config 3} hpicfDSnoopV6PortMaxBindingEntry OBJECT-TYPE SYNTAX HpicfDSnoopV6PortMaxBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The maximum number of bindings on the Port." AUGMENTS { hpicfSaviObjectsPortEntry } ::= { hpicfDSnoopV6PortMaxBindingTable 1 } HpicfDSnoopV6PortMaxBindingEntry ::= SEQUENCE { hpicfDSnoopV6PortStaticBinding Unsigned32, hpicfDSnoopV6PortDynamicBinding Unsigned32 } hpicfDSnoopV6PortStaticBinding OBJECT-TYPE SYNTAX Unsigned32 (0..8192) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the static bindings configured on this port." ::= { hpicfDSnoopV6PortMaxBindingEntry 2 } hpicfDSnoopV6PortDynamicBinding OBJECT-TYPE SYNTAX Unsigned32 (0..8192) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of dynamic bindings on this port." ::= { hpicfDSnoopV6PortMaxBindingEntry 3 } -- AUGMENTS hpicfSaviObjectsBindingEntry for VlanID hpicfDSnoopV6StaticBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfDSnoopV6StaticBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VLAN ID for binding entry." ::= { hpicfDSnoopV6Config 4 } hpicfDSnoopV6StaticBindingEntry OBJECT-TYPE SYNTAX HpicfDSnoopV6StaticBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension of VLAN ID in hpicfSaviObjectsBindingTable." AUGMENTS { hpicfSaviObjectsBindingEntry } ::= { hpicfDSnoopV6StaticBindingTable 1 } HpicfDSnoopV6StaticBindingEntry ::= SEQUENCE { hpicfDSnoopV6BindingVlanId VlanIndex, hpicfDSnoopV6BindingLLAddress InetAddress, hpicfDSnoopV6BindingSecVlan Unsigned32 } hpicfDSnoopV6BindingVlanId OBJECT-TYPE SYNTAX VlanIndex (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN on which this client is discovered." ::= { hpicfDSnoopV6StaticBindingEntry 1 } hpicfDSnoopV6BindingLLAddress OBJECT-TYPE SYNTAX InetAddress ( SIZE (4|16) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN on which this client is discovered." ::= { hpicfDSnoopV6StaticBindingEntry 2 } hpicfDSnoopV6BindingSecVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary VLAN on which this client is discovered. if binding is learned on primary or normal VLAN, this object will be zero. " ::= { hpicfDSnoopV6StaticBindingEntry 3 } hpicfDSnoopV6SourceBindingOutOfResources NOTIFICATION-TYPE OBJECTS { hpicfDsnoopV6SourceBindingPort, hpicfDsnoopV6SourceBindingMacAddress, hpicfDsnoopV6SourceBindingIpAddressType, hpicfDsnoopV6SourceBindingIpAddress, hpicfDsnoopV6SourceBindingVlan} STATUS current DESCRIPTION "This trap indicates that the number of bindings exceeded the maximum limit of 8192 bindings. This notification trap is controlled by the state of ' hpicfDSnoopV6OutOfResourcesTrapCtrl' object. Implementation of this trap is optional." ::= { hpicfDSnoopV6Notifications 1 } hpicfDsnoopV6SourceBindingOutOfResourcesObjects OBJECT IDENTIFIER ::= { hpicfDSnoopV6Notifications 2} hpicfDsnoopV6SourceBindingPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The port of failed binding entry. Maximum binding limit is reached." ::= { hpicfDsnoopV6SourceBindingOutOfResourcesObjects 1 } hpicfDsnoopV6SourceBindingMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MAC address of failed binding entry. Maximum binding limit is reached." ::= { hpicfDsnoopV6SourceBindingOutOfResourcesObjects 2 } hpicfDsnoopV6SourceBindingIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPv6 address type of failed binding entry. Maximum binding limit is reached." ::= { hpicfDsnoopV6SourceBindingOutOfResourcesObjects 3 } hpicfDsnoopV6SourceBindingIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPv6 address of failed binding entry. Maximum binding limit is reached." ::= { hpicfDsnoopV6SourceBindingOutOfResourcesObjects 4 } hpicfDsnoopV6SourceBindingVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN of failed binding entry. Maximum binding limit is reached." ::= { hpicfDsnoopV6SourceBindingOutOfResourcesObjects 5 } hpicfDSnoopV6SourceBindingErrantReply NOTIFICATION-TYPE OBJECTS {hpicfDSnoopV6SourceBindingNotifyCount, hpicfDSnoopV6SourceBindingErrantSrcMAC, hpicfDSnoopV6SourceBindingErrantSrcIPType, hpicfDSnoopV6SourceBindingErrantSrcIP} STATUS current DESCRIPTION "An hpicfDSnoopV6SourceBindingErrantReply notification signifies that the DHCPV6 snooping entity has detected and dropped an errant DHCPv6 reply packet. This notification trap is controlled by the state of 'hpicfDSnoopV6ErrantReplyTrapCtrl' object " ::= { hpicfDSnoopV6Notifications 3 } hpicfDSnoopV6SourceBindingNotifyObjects OBJECT IDENTIFIER ::= { hpicfDSnoopV6Notifications 4 } hpicfDSnoopV6SourceBindingNotifyCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A count of the DHCPV6 snooping notification sent from the DHCPv6 snooping entity to the SNMP entity. This count may be greater than the count of notifications actually transmitted by the SNMP entity due to rate limiting or configuration." ::= { hpicfDSnoopV6SourceBindingNotifyObjects 1 } hpicfDSnoopV6SourceBindingErrantSrcMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MAC address received in the errant DHCPv6 reply packet." ::= { hpicfDSnoopV6SourceBindingNotifyObjects 2 } hpicfDSnoopV6SourceBindingErrantSrcIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of address reported in hpicfDhcpSnoopSourceBindingErrantSrcIP." ::= { hpicfDSnoopV6SourceBindingNotifyObjects 3 } hpicfDSnoopV6SourceBindingErrantSrcIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPv6 address received in the errant DHCPv6 reply packet." ::= { hpicfDSnoopV6SourceBindingNotifyObjects 4 } hpicfDSnoopV6Conformance OBJECT IDENTIFIER ::= { hpicfDSnoopV6 2 } hpicfDSnoopV6Groups OBJECT IDENTIFIER ::= { hpicfDSnoopV6Conformance 1 } hpicfDSnoopV6BaseGroup OBJECT-GROUP OBJECTS {hpicfDSnoopV6Enable, hpicfDSnoopV6VlanEnable, hpicfDSnoopV6CSForwards, hpicfDSnoopV6CSBadReleases, hpicfDSnoopV6CSUntrustedDestPorts, hpicfDSnoopV6CSMACMismatches, hpicfDSnoopV6SCForwards, hpicfDSnoopV6SCUnauthorizedServers, hpicfDSnoopV6SCUntrustedPorts,hpicfDSnoopV6SCRelayReplyUntrustedPorts} STATUS deprecated DESCRIPTION "A collection of objects for configuring and monitoring the base DHCPv6 snooping functionality." ::= { hpicfDSnoopV6Groups 1 } hpicfDSnoopV6ServersGroup OBJECT-GROUP OBJECTS {hpicfDSnoopV6AuthorizedServerStatus} STATUS current DESCRIPTION "A collection of objects for configuring and monitoring DHCP snooping trusted servers." ::= { hpicfDSnoopV6Groups 2 } hpicfDSnoopV6DbaseFileGroup OBJECT-GROUP OBJECTS {hpicfDSnoopV6DatabaseFile, hpicfDSnoopV6DatabaseWriteDelay, hpicfDSnoopV6DatabaseWriteTimeout, hpicfDSnoopV6DBFileWriteAttempts, hpicfDSnoopV6DBFileWriteFailures, hpicfDSnoopV6DBFileReadStatus, hpicfDSnoopV6DBFileWriteStatus, hpicfDSnoopV6DBFileLastWriteTime} STATUS deprecated DESCRIPTION "A collection of objects for configuring and monitoring DHCP snooping database file management." ::= { hpicfDSnoopV6Groups 3 } hpicfDSnoopV6MaxBindingsGroup OBJECT-GROUP OBJECTS { hpicfDSnoopV6MaxbindPktsDropped,hpicfDSnoopV6PortStaticBinding, hpicfDSnoopV6PortDynamicBinding} STATUS current DESCRIPTION "A collection of objects for monitoring the binding limits on a port." ::={hpicfDSnoopV6Groups 4} hpicfDSnoopV6StaticBindingsGroup OBJECT-GROUP OBJECTS {hpicfDSnoopV6BindingVlanId,hpicfDSnoopV6BindingLLAddress, hpicfDSnoopV6BindingSecVlan} STATUS current DESCRIPTION "A collection of objects used to configure static binding for a VLAN." ::={hpicfDSnoopV6Groups 5} hpicfDSnoopV6ClearStatsOptionsGroup OBJECT-GROUP OBJECTS { hpicfDSnoopV6ClearStats } STATUS current DESCRIPTION "A collection of objects used to clear DSNOOPv6 statistics." ::= { hpicfDSnoopV6Groups 6} hpicfDSnoopV6TrapObjectsGroup OBJECT-GROUP OBJECTS {hpicfDSnoopV6SourceBindingNotifyCount, hpicfDSnoopV6SourceBindingErrantSrcMAC, hpicfDSnoopV6SourceBindingErrantSrcIPType, hpicfDSnoopV6SourceBindingErrantSrcIP, hpicfDsnoopV6SourceBindingPort, hpicfDsnoopV6SourceBindingMacAddress, hpicfDsnoopV6SourceBindingIpAddressType, hpicfDsnoopV6SourceBindingIpAddress, hpicfDsnoopV6SourceBindingVlan, hpicfDSnoopV6OutOfResourcesTrapCtrl, hpicfDSnoopV6ErrantReplyTrapCtrl} STATUS current DESCRIPTION "A collection of objects used in the DSNOOPv6 notification." ::= { hpicfDSnoopV6Groups 7 } hpicfDSnoopV6TrapsGroup NOTIFICATION-GROUP NOTIFICATIONS {hpicfDSnoopV6SourceBindingOutOfResources, hpicfDSnoopV6SourceBindingErrantReply} STATUS current DESCRIPTION "A collection of trap objects that provide DSNOOPv6 notifications." ::= { hpicfDSnoopV6Groups 8 } hpicfDSnoopV6DbaseFileGroup1 OBJECT-GROUP OBJECTS {hpicfDSnoopV6DatabaseFile, hpicfDSnoopV6DatabaseWriteDelay, hpicfDSnoopV6DatabaseWriteTimeout, hpicfDSnoopV6DBFileWriteAttempts, hpicfDSnoopV6DBFileWriteFailures, hpicfDSnoopV6DBFileReadStatus, hpicfDSnoopV6DBFileWriteStatus, hpicfDSnoopV6DBFileLastWriteTime, hpicfDSnoopV6DatabaseFTPort, hpicfDSnoopV6DatabaseSFTPUsername, hpicfDSnoopV6DatabaseSFTPPassword, hpicfDSnoopV6DatabaseValidateSFTPServer} STATUS current DESCRIPTION "A collection of objects for configuring and monitoring DHCP snooping database file management." ::= { hpicfDSnoopV6Groups 9 } hpicfDSnoopV6BaseGroup1 OBJECT-GROUP OBJECTS {hpicfDSnoopV6Enable, hpicfDSnoopV6VlanEnable, hpicfDSnoopV6CSForwards, hpicfDSnoopV6CSBadReleases, hpicfDSnoopV6CSUntrustedDestPorts, hpicfDSnoopV6CSMACMismatches, hpicfDSnoopV6SCForwards, hpicfDSnoopV6SCUnauthorizedServers, hpicfDSnoopV6SCUntrustedPorts,hpicfDSnoopV6SCRelayReplyUntrustedPorts, hpicfDSnoopV6RateLimit} STATUS current DESCRIPTION "A collection of objects for configuring and monitoring the base DHCPv6 snooping functionality." ::= { hpicfDSnoopV6Groups 10 } hpicfDSnoopV6Compliances OBJECT IDENTIFIER ::= { hpicfDSnoopV6Conformance 3 } hpicfDSnoopV6Compliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Routing switches that support DHCPv6 Snooping." MODULE -- this module MANDATORY-GROUPS { hpicfDSnoopV6BaseGroup } GROUP hpicfDSnoopV6ServersGroup DESCRIPTION "This group is mandatory for implementations that support a DHCPv6 trusted server list." GROUP hpicfDSnoopV6DbaseFileGroup DESCRIPTION "This group is mandatory for implementations that support saving the DHCPv6 lease database to a remote server." GROUP hpicfDSnoopV6MaxBindingsGroup DESCRIPTION "This group is mandatory for implementations that supports monitoring the max-bindings on a port." GROUP hpicfDSnoopV6StaticBindingsGroup DESCRIPTION "This group is mandatory for implementations that support adding static binding entries into Binding Table." GROUP hpicfDSnoopV6ClearStatsOptionsGroup DESCRIPTION "This group is mandatory for implementations that support clearing of DSNOOPv6 statistics." GROUP hpicfDSnoopV6TrapObjectsGroup DESCRIPTION "Group of objects used in DHCPV6 Snooping notifications." GROUP hpicfDSnoopV6TrapsGroup DESCRIPTION "DHCPV6 Snooping notifications." ::= { hpicfDSnoopV6Compliances 1 } hpicfDSnoopV6Compliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Routing switches that support DHCPv6 Snooping." MODULE -- this module MANDATORY-GROUPS { hpicfDSnoopV6BaseGroup } GROUP hpicfDSnoopV6ServersGroup DESCRIPTION "This group is mandatory for implementations that support a DHCPv6 trusted server list." GROUP hpicfDSnoopV6MaxBindingsGroup DESCRIPTION "This group is mandatory for implementations that supports monitoring the max-bindings on a port." GROUP hpicfDSnoopV6StaticBindingsGroup DESCRIPTION "This group is mandatory for implementations that support adding static binding entries into Binding Table." GROUP hpicfDSnoopV6ClearStatsOptionsGroup DESCRIPTION "This group is mandatory for implementations that support clearing of DSNOOPv6 statistics." GROUP hpicfDSnoopV6TrapObjectsGroup DESCRIPTION "Group of objects used in DHCPV6 Snooping notifications." GROUP hpicfDSnoopV6TrapsGroup DESCRIPTION "DHCPV6 Snooping notifications." GROUP hpicfDSnoopV6DbaseFileGroup1 DESCRIPTION "This group is mandatory for implementations that support saving the DHCPv6 lease database to a remote server." ::= { hpicfDSnoopV6Compliances 2 } hpicfDSnoopV6Compliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches that support DHCPv6 Snooping." MODULE -- this module MANDATORY-GROUPS { hpicfDSnoopV6BaseGroup1 } GROUP hpicfDSnoopV6ServersGroup DESCRIPTION "This group is mandatory for implementations that support a DHCPv6 trusted server list." GROUP hpicfDSnoopV6MaxBindingsGroup DESCRIPTION "This group is mandatory for implementations that supports monitoring the max-bindings on a port." GROUP hpicfDSnoopV6StaticBindingsGroup DESCRIPTION "This group is mandatory for implementations that support adding static binding entries into Binding Table." GROUP hpicfDSnoopV6ClearStatsOptionsGroup DESCRIPTION "This group is mandatory for implementations that support clearing of DSNOOPv6 statistics." GROUP hpicfDSnoopV6TrapObjectsGroup DESCRIPTION "Group of objects used in DHCPV6 Snooping notifications." GROUP hpicfDSnoopV6TrapsGroup DESCRIPTION "DHCPV6 Snooping notifications." GROUP hpicfDSnoopV6DbaseFileGroup1 DESCRIPTION "This group is mandatory for implementations that support saving the DHCPv6 lease database to a remote server." ::= { hpicfDSnoopV6Compliances 3 } END