--**MOD+**************************************************************************** --* Module: hpicfConfig.mib --* --* Copyright (C) 2017 Hewlett Packard Enterprise Development LP --* All Rights Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett Packard Enterprise Development LP. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett Packard Enterprise Development LP. --* --* Purpose: This file contains MIB definition of HP-ICF-CFGRESTORE-MIB --* --**MOD-**************************************************************************** HP-ICF-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS hpSwitch FROM HP-ICF-OID OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Unsigned32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC; hpicfConfig MODULE-IDENTITY LAST-UPDATED "201710070000Z" -- October 07, 2017 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett Packard Enterprise Development LP. 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HPE proprietary objects for handling the Configuration Restore feature." REVISION "201710070000Z" -- October 07, 2017 DESCRIPTION "Removed default value field of recovery mode." REVISION "201704190000Z" -- April 19, 2017 DESCRIPTION "Added recovery mode for config restore." REVISION "201703080000Z" -- March 08, 2017 DESCRIPTION "Initial version." ::= { hpSwitch 136 } -- ---------------------------------------------------------------------- -- Starting node of config restore feature is "hpicfConfig". -- hpicfConfig is added to 136th position of "hpSwitch". -- OID of "hpicfConfig" -- 1.3.6.1.4.1.11.2.14.11.5.1.136 -- -- ---------------------------------------------------------------------- -- Node definitions. -- ---------------------------------------------------------------------- -- Node zero of hpicfConfig is reserved for notifications. -- Node one of hpicfConfig is reserved for scalars. -- Node two of hpicfConfig is reserved for globals. -- Node three of hpicfConfig is for conformance. -- Node four of hpicfConfig is for config restoring. -- ---------------------------------------------------------------------- hpicfConfigNotifications OBJECT IDENTIFIER ::= { hpicfConfig 0 } hpicfConfigScalar OBJECT IDENTIFIER ::= { hpicfConfig 1 } hpicfConfigGlobals OBJECT IDENTIFIER ::= { hpicfConfig 2 } hpicfConfigConformance OBJECT IDENTIFIER ::= { hpicfConfig 3 } hpicfConfigConfig OBJECT IDENTIFIER ::= { hpicfConfig 4 } -- --------------------------------------------------------------------- -- "hpicfConfigConfig" is the 4th node of "hpicfConfig" -- and has 2 child nodes. -- 1 for config restore objects. -- 2 for config backup objects. -- --------------------------------------------------------------------- -- --------------------------------------------------------------------- -- 1st member of hpicfConfigConfig. -- This is for storing config restore attributes -- --------------------------------------------------------------------- hpicfConfigObjects OBJECT IDENTIFIER ::= { hpicfConfigConfig 1 } hpicfConfigRestoreFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the configuration file name to be restored." ::= { hpicfConfigObjects 1 } hpicfConfigRunningConfigSHA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the SHA ID of running configuration." ::= { hpicfConfigObjects 2 } hpicfConfigStartupConfigSHA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the SHA ID of startup configuration." ::= { hpicfConfigObjects 3 } hpicfConfigRestoreStatus OBJECT-TYPE SYNTAX INTEGER { notYetRun(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the status of cfg-restore." DEFVAL{ notYetRun } ::= { hpicfConfigObjects 4 } hpicfConfigRecoveryMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the recovery mode for cfg-restore. Default value of RecoveryMode is enabled." ::= { hpicfConfigObjects 5 } -- --------------------------------------------------------------------- -- 2nd member of hpicfConfigConfig. -- This is for storing config backup attributes -- --------------------------------------------------------------------- hpicfConfigFilesObjects OBJECT IDENTIFIER ::= { hpicfConfigConfig 2 } hpicfConfigFilesTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfConfigFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration backup files table" ::= { hpicfConfigFilesObjects 1 } hpicfConfigFilesEntry OBJECT-TYPE SYNTAX HpicfConfigFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table specifies the list of configuration files in the flash. " INDEX { hpicfConfigFilePos } ::= { hpicfConfigFilesTable 1 } HpicfConfigFilesEntry ::= SEQUENCE { hpicfConfigFilePos Unsigned32, hpicfConfigFileName OCTET STRING, hpicfConfigTimestamp DateAndTime } hpicfConfigFilePos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Backup file sequence number." ::= { hpicfConfigFilesEntry 1 } hpicfConfigFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration file name." ::= { hpicfConfigFilesEntry 2 } hpicfConfigTimestamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Backup file creation time." ::= { hpicfConfigFilesEntry 3 } ------------------------------------------------------------------------------- -- "hpicfConfigConformance" is the 3rd node of "hpicfConfig" -- and has two child nodes. -- 1 for Group Declarations -- 2 for Compliance Statements ------------------------------------------------------------------------------- hpicfConfigGroups OBJECT IDENTIFIER ::= {hpicfConfigConformance 1} hpicfConfigMIBCompliances OBJECT IDENTIFIER ::= {hpicfConfigConformance 2} ------------------------------------------------------------------------------- -- Compliance Statements ------------------------------------------------------------------------------- hpicfConfigMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement Config Restore." MODULE -- this module MANDATORY-GROUPS { hpicfConfigScalarsGroup, hpicfConfigFilesGroup } ::= {hpicfConfigMIBCompliances 1} ------------------------------------------------------------------------------ -- MIB Groupings ------------------------------------------------------------------------------ hpicfConfigScalarsGroup OBJECT-GROUP OBJECTS { hpicfConfigRestoreFileName, hpicfConfigRunningConfigSHA, hpicfConfigStartupConfigSHA, hpicfConfigRestoreStatus, hpicfConfigRecoveryMode } STATUS current DESCRIPTION "A collection of HPE proprietary objects to support Configuration restore" ::= { hpicfConfigGroups 1 } hpicfConfigFilesGroup OBJECT-GROUP OBJECTS { hpicfConfigFileName, hpicfConfigTimestamp } STATUS current DESCRIPTION "A collection of HPE proprietary objects to support Configuration restore" ::= { hpicfConfigGroups 2 } ------------------------------------------------------------------------------ END