--**MOD+*********************************************************************** --* Module: hpicfBridge.mib --* --* Copyright (C) 2000-2013, 2018, 2020, 2021 Hewlett Packard Enterprise --* Development LP All Rights Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett Packard Enterprise Development LP. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett Packard Enterprise Development LP. --* --* Purpose: This file contains MIB definition of HP-ICF-BRIDGE MIB --* --**MOD-*********************************************************************** HP-ICF-BRIDGE DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32 FROM SNMPv2-SMI TruthValue, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF dot1dBasePortEntry FROM BRIDGE-MIB VlanIndex,VlanId FROM Q-BRIDGE-MIB hpSwitch FROM HP-ICF-OID ConfigStatus FROM HP-ICF-TC dot1qVlanStaticEntry FROM Q-BRIDGE-MIB ifIndex FROM IF-MIB portCopyEntry FROM SMON-MIB VidList FROM HP-ICF-FTRCO; hpicfBridge MODULE-IDENTITY LAST-UPDATED "202011180000Z" -- November 18, 2020 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary extensions to the standard Bridge MIBs." REVISION "202011180000Z" -- November 18, 2020 DESCRIPTION "A new textual convention disableRx(4) is added for the hpicfBridgeLoopProtectPortReceiverAction MIB." REVISION "201811220000Z" -- November 22, 2018 DESCRIPTION "The range of the MIB object hpicfBridgeRstpPortPathCost is modified from 1..200000000 to 0..200000000." REVISION "201310110000Z" -- October 11, 2013 DESCRIPTION "The description of selected MIB objects is modified for clarity and usability." REVISION "201207130000Z" -- Jul 13, 2012 DESCRIPTION "A new textual convention disableTxRx(3) is added for the hpicfBridgeLoopProtectPortReceiverAction MIB." REVISION "201205300000Z" -- Apr 30, 2012 DESCRIPTION "Added 'hpicfBridgeGvrpStateMachineTable'with the following mib objects: hpicfGenericVlanId,hpicfApplicantStateMachine,hpicfApplicantStateMachine. Added hpicfBridgeGvrpPortGroup1, hpicfBridgeComplianceRevFour1 and deprecated hpicfBridgeGvrpPortGroup, hpicfBridgeComplianceRevFour." REVISION "201006260000Z" -- Jun 26, 2010 DESCRIPTION "This MIB module supports loop protect per vlan feature." REVISION "200912150000Z" -- Dec 15, 2009 DESCRIPTION "Added 'hpicfBridgeMirrorSessionType' MIB object." REVISION "200902110000Z" -- Feb 11, 2009 DESCRIPTION "Added 'hpicfBridgeVoiceVlanConfigTable', 'hpicfBridgeJumboInterfaceConfigTable' 'hpicfBridgeManagementInterfaceConfigTable' objects." REVISION "200609300000Z" -- September 30, 2006 DESCRIPTION "Added 'hpicfBridgeMirrorSessionID' MIB object." REVISION "200609260000Z" -- September 26, 2006 DESCRIPTION "Added 'hpicfBridgeRstpAutoEdgePort' MIB object." REVISION "200608131738Z" -- Aug 08, 2006 DESCRIPTION "Added hpicfLoopProtect MIB and updated conformance statements." REVISION "200302200000Z" -- February 20, 2003 DESCRIPTION "Added 'mstpOperation' option to the 'hpicfBridgeRstpForceVersion' MIB object. Added 'ieee8021s' option to the 'hpicfBridgeRstpProtocolVersion' MIB object." REVISION "200205231738Z" -- May 23, 2002 DESCRIPTION "Added conformance information." REVISION "200110032050Z" -- October 3, 2001 DESCRIPTION "Modified hpicfBridgeRstp MIB to contain ConfigStatus." REVISION "200011030642Z" -- November 3, 2000 DESCRIPTION "Initial revision." ::= { hpSwitch 12 } BridgeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Bridge Identifier as used in the Spanning Tree Protocol to uniquely identify a bridge." SYNTAX OCTET STRING (SIZE (8)) hpicfBridgeObjects OBJECT IDENTIFIER ::= { hpicfBridge 1 } hpicfBridgeBase OBJECT IDENTIFIER ::= { hpicfBridgeObjects 1 } -- ********************************************************************** -- VLAN Objects -- ********************************************************************** hpicfBridgeMaxVlans OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the number of VLANs that the switch will support for dynamic use without requiring a reboot." ::= { hpicfBridgeBase 1 } hpicfBridgeVlanEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative status of VLAN support on this switch." ::= { hpicfBridgeBase 2 } hpicfBridgePrimaryVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1Q VLAN ID of the primary VLAN for this switch." ::= { hpicfBridgeBase 3 } hpicfBridgeVlanConfigStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "If one or more variables in this group has been reconfigured since the last reboot in such a way as to require a reboot to take effect, the value of this variable will be set to 'notInService'." ::= { hpicfBridgeBase 4 } -- ********************************************************************** -- GVRP Objects -- ********************************************************************** hpicfBridgeGvrp OBJECT IDENTIFIER ::= { hpicfBridgeObjects 2 } hpicfBridgeGvrpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeGvrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the GVRP port configurations on this switch." ::= { hpicfBridgeGvrp 1 } hpicfBridgeGvrpPortEntry OBJECT-TYPE SYNTAX HpicfBridgeGvrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GVRP information associated with a single port." AUGMENTS { dot1dBasePortEntry } ::= { hpicfBridgeGvrpPortTable 1 } HpicfBridgeGvrpPortEntry ::= SEQUENCE { hpicfBridgeGvrpRestrictedVlanReg TruthValue } hpicfBridgeGvrpRestrictedVlanReg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GVRP will only process protocol packets that concern themselves with known VLANs." ::= { hpicfBridgeGvrpPortEntry 1 } hpicfBridgeGvrpStateMachineTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeGvrpStateMachineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the GVRP state Machine(s) configuration." ::= { hpicfBridgeGvrp 2 } hpicfBridgeGvrpStateMachineEntry OBJECT-TYPE SYNTAX HpicfBridgeGvrpStateMachineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in a table, containing the VLAN ID and Portlist." INDEX {hpicfGenericVlanId, ifIndex} ::= { hpicfBridgeGvrpStateMachineTable 1 } HpicfBridgeGvrpStateMachineEntry ::= SEQUENCE { hpicfGenericVlanId VlanId, hpicfApplicantStateMachine INTEGER, hpicfRegistarStateMachine INTEGER } hpicfGenericVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID to which this entry belongs." ::= { hpicfBridgeGvrpStateMachineEntry 1} hpicfApplicantStateMachine OBJECT-TYPE SYNTAX INTEGER { va(0), aa(1), qa(2), la(3), vp(4), ap(5), qp(6), vo(7), ao(8), qo(9), lo(10), von(11), aon(12), qon(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB provides the Applicant State Machine values of the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa, 3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = qo,10 = lo, 11 = von,12 = aon,13 = qon. Whereas, the first letter indicates the state: V for Very anxious, A for Anxious, Q for Quiet, and L for Leaving. The second letter indicates the membership state: A for Active member,P for Passive member, O for Observer. And the third letter N (if any) stands for Non-participant." ::= { hpicfBridgeGvrpStateMachineEntry 2} hpicfRegistarStateMachine OBJECT-TYPE SYNTAX INTEGER { inn(0), lv(1), l3(2), l2(3), l1(4), mt(5), inr(6), lvr(7), l3r(8), l2r(9), l1r(10), mtr(11), inf(12), lvf(13), l3f(14), l2f(15), l1f(16), mtf(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB provides the Registrar state machine value for the GVRP enabled port as follows,0 = inn,1 = lv,2 = l3,3 = l2, 4 = l1,5 = mt,6 = inr,7 = lvr,8 = l3r,9 = l2r,10 = l1r,11 = mtr, 12 = inf,13 = lvf,14 = l3f,15 = l2f,16 = l1f,17 = mtf . Whereas, the first two letters/numbers indicate the state: IN stands for In; LV, L3, L2, and L1 all stand for Leaving, and L3, L2, L1 are three sub-states of LV; MT stands for Empty. And the third letter indicates the registration mode: N (or the third letter being absent) for normal registration,R for Registration fixed, and F for Registration forbidden.. indicating the fixed registration mode in Empty state." ::= { hpicfBridgeGvrpStateMachineEntry 3} -- ********************************************************************** -- Rapid Reconfiguration Spanning Tree Objects -- ********************************************************************** hpicfBridgeRstp OBJECT IDENTIFIER ::= { hpicfBridgeObjects 4 } hpicfBridgeRstpForceVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatibility(0), rstpOperation(2), mstpOperation(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational mode of the Spanning Tree Protocol. A value of stpCompatibility (0) indicates that the Spanning Tree Protocol operates in IEEE 802.1d mode on all ports. A value of rstpOperation (2) indicates that the Spanning Tree Protocol operates in IEEE 802.1w mode on all ports, except for the ports to which bridges are connected. The ports to which bridges are connected operate in IEEE 802.1d mode for backward compatibility. A value of mstpOperation (3) indicates that the Spanning Tree Protocol operates in IEEE 802.1s mode on all ports, except for the ports to which bridges are connected. The ports to which bridges are connected operate in IEEE 802.1d mode for backward compatibility. This option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'." ::= { hpicfBridgeRstp 1 } hpicfBridgeRstpConfigStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration status of this group of objects. The value of this object is set to 'notInService' if any variable in this group is reconfigured since the last reboot and a system reboot is required for the configuration to take effect." ::= { hpicfBridgeRstp 2 } hpicfBridgeRstpProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ieee8021d(0), ieee8021w(2), ieee8021s(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of Spanning Tree Protocol currently running on the switch. - ieee8021d is the version of Spanning Tree Protocol defined as IEEE 802.1d (STP). - ieee8021w is the version of Spanning Tree Protocol defined as IEEE 802.1w (RSTP). - ieee8021s is the version of Spanning Tree Protocol defined as IEEE 802.1s (MSTP)." ::= { hpicfBridgeRstp 3 } hpicfBridgeRstpAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational status of the Spanning Tree Protocol" ::= { hpicfBridgeRstp 4 } hpicfBridgeRstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about STP configuration on all ports." ::= { hpicfBridgeRstp 5 } hpicfBridgeRstpPortEntry OBJECT-TYPE SYNTAX HpicfBridgeRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfBridgeRstpPortTable which holds the information of STP configuration of a port. An entry is available for each port in this table." INDEX { hpicfBridgeRstpPortIndex } ::= { hpicfBridgeRstpPortTable 1 } HpicfBridgeRstpPortEntry ::= SEQUENCE { hpicfBridgeRstpPortIndex Integer32, hpicfBridgeRstpAdminEdgePort INTEGER, hpicfBridgeRstpOperEdgePort INTEGER, hpicfBridgeRstpAdminPointToPointMac INTEGER, hpicfBridgeRstpOperPointToPointMac TruthValue, hpicfBridgeRstpPortPathCost Integer32, hpicfBridgeRstpForceBpduMigrationCheck TruthValue, hpicfBridgeRstpAutoEdgePort TruthValue, hpicfBridgeRstpPortBpduFiltering TruthValue } hpicfBridgeRstpPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1w" ::= { hpicfBridgeRstpPortEntry 1 } hpicfBridgeRstpAdminEdgePort OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate that port is connected to LAN segment that don't have any bridge connected to it" REFERENCE "IEEE P802.1w Clause 17.3; IEEE P802.1t Clause 18" ::= { hpicfBridgeRstpPortEntry 2 } hpicfBridgeRstpOperEdgePort OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the value of the operEdgePort parameter, as defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this parameter is used by a Designated Port in order to determine how rapidly it may transition to the Forwarding Port State (see 17.23, Port Role Transitions state machine). The Bridge Detection state machine sets this parameter to the value of adminEdgePort (P802.1t 18.1.3) on initialization, and forces its value to FALSE if any BPDUs are received on the Port." REFERENCE "IEEE P802.1w Clause 17.3; IEEE P802.1t Clause 18" ::= { hpicfBridgeRstpPortEntry 3 } hpicfBridgeRstpAdminPointToPointMac OBJECT-TYPE SYNTAX INTEGER { forceTrue(1), forceFalse(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5." REFERENCE "IEEE P802.1w; IEEE P802.1t" ::= { hpicfBridgeRstpPortEntry 4 } hpicfBridgeRstpOperPointToPointMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " true: This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment." REFERENCE "IEEE P802.1w; IEEE P802.1t" ::= { hpicfBridgeRstpPortEntry 5 } hpicfBridgeRstpPortPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read." REFERENCE "IEEE 802.1D-1998: Section 8.5.5.3" DEFVAL { 0 } ::= { hpicfBridgeRstpPortEntry 6 } hpicfBridgeRstpForceBpduMigrationCheck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When operating in RSTP version 2 or later, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object always returns FALSE(2) when read." REFERENCE "IEEE P802.1w" ::= { hpicfBridgeRstpPortEntry 7 } hpicfBridgeRstpAutoEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the identification of edge ports. When set to TRUE, it is used by the bridge detection state machine for automatic identification of edge ports. The default value is FALSE." REFERENCE "IEEE 802.1D-2004" ::= { hpicfBridgeRstpPortEntry 8 } hpicfBridgeRstpPortBpduFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This objects determines the BPDU filtering on ports. When set to TRUE, the port does not transmit any BPDU and all the received BPDUs are dropped. When set to FALSE, all the BPDUs are processed normally. The default is false." REFERENCE "IEEE P802.1w" ::= { hpicfBridgeRstpPortEntry 9 } hpicfBridgeStpBpduThrottleConfig OBJECT IDENTIFIER ::= { hpicfBridgeRstp 6 } hpicfBridgeStpBpduThrottleStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the BPDU Throttling feature on the device." DEFVAL { enable } ::= { hpicfBridgeStpBpduThrottleConfig 1 } hpicfBridgeStpBpduThrottleValue OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the inbound rate limit value to throttle the MSTP BPDUs on the device. The valid throttle values are 64, 128, and 256 packets per second (pps). The default throttle value is 256 pps" DEFVAL { 256 } ::= { hpicfBridgeStpBpduThrottleConfig 2 } -- ********************************************************************** -- Loop Protection Objects -- ********************************************************************** -- Port Remediation Textual Convention LoopProtectReceiverAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " This TC describes the actions a port that receives a Loop Protection Protocol packet can take. The disableTx(1) enumeration indicates that the sender of the Loop Protect packet will be disabled. The noDisable(2) enumeration indicates that no port is to be disabled. The disableTxRx(3) enumeration indicates that the senders and receivers of the Loop Protect packets will be disabled. The disableRx(4) enumeration indicates that the receiver of the Loop Protect packet will be disabled." SYNTAX INTEGER { disableTx(1), noDisable(2), disableTxRx(3), disableRx(4) } hpicfBridgeLoopProtect OBJECT IDENTIFIER ::= { hpicfBridgeObjects 5 } hpicfBridgeLoopProtectNotifications OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 0 } hpicfBridgeLoopProtectBase OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 1 } hpicfBridgeLoopProtectPort OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 2 } hpicfBridgeLoopProtectInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds at which Loop Protection packets are transmitted. The default value is 5 seconds." ::= { hpicfBridgeLoopProtectBase 1 } hpicfBridgeLoopProtectTrapLoopDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2)." ::= { hpicfBridgeLoopProtectBase 2 } hpicfBridgeLoopProtectEnableTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port is initialized. If the re-enable timer value is specified as zero seconds the port remains disabled, else the port is re-enabled after the specified time." ::= { hpicfBridgeLoopProtectBase 3 } hpicfBridgeLoopProtectMode OBJECT-TYPE SYNTAX INTEGER { port (1), vlan (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the operational mode of Loop Protection feature. The Loop Protection feature can be configured to operate in port mode or VLAN mode." DEFVAL { port } ::= { hpicfBridgeLoopProtectBase 4 } hpicfBridgeLoopProtectVIDList OBJECT-TYPE SYNTAX VidList MAX-ACCESS read-write STATUS current DESCRIPTION "A list of VLANs on which Loop Protection is enabled." ::= { hpicfBridgeLoopProtectBase 5 } hpicfBridgeLoopProtectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeLoopProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per-interface configuration for Loop Protection." ::= { hpicfBridgeLoopProtectPort 1 } hpicfBridgeLoopProtectPortEntry OBJECT-TYPE SYNTAX HpicfBridgeLoopProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Loop Protection configuration information for a single port." INDEX { ifIndex } ::= { hpicfBridgeLoopProtectPortTable 1 } HpicfBridgeLoopProtectPortEntry ::= SEQUENCE { hpicfBridgeLoopProtectPortEnable TruthValue, hpicfBridgeLoopProtectPortLoopDetected TruthValue, hpicfBridgeLoopProtectPortLastLoopTime TimeStamp, hpicfBridgeLoopProtectPortLoopCount Counter32, hpicfBridgeLoopProtectPortReceiverAction LoopProtectReceiverAction, hpicfBridgeLoopDetectedVlan Integer32 } hpicfBridgeLoopProtectPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the Loop Protection is enabled on a port. The default value is FALSE" ::= { hpicfBridgeLoopProtectPortEntry 1 } hpicfBridgeLoopProtectPortLoopDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's hpicfBridgeLoopProtectPortEnable is set to FALSE." ::= { hpicfBridgeLoopProtectPortEntry 2 } hpicfBridgeLoopProtectPortLastLoopTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set." ::= { hpicfBridgeLoopProtectPortEntry 3 } hpicfBridgeLoopProtectPortLoopCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the number of loops detected on a Loop Protection enabled port. The value of this object is set to zero when Loop Protection is disabled on a port." ::= { hpicfBridgeLoopProtectPortEntry 4 } hpicfBridgeLoopProtectPortReceiverAction OBJECT-TYPE SYNTAX LoopProtectReceiverAction MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. When set to 'noDisable' the transmitting port is not disabled. When set to 'disableTxRx' the ports transmitting and receiving the packets are disabled. When set to 'disableRx' the port that received the packet is disabled." ::= { hpicfBridgeLoopProtectPortEntry 5 } hpicfBridgeLoopDetectedVlan OBJECT-TYPE SYNTAX Integer32(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Refers to this object for the port on which loop is detected." ::= { hpicfBridgeLoopProtectPortEntry 6 } -- ********************************************************************** -- hpicfBridgeLoopProtect Notifications -- ********************************************************************** hpicfBridgeLoopProtectLoopDetectedNotification NOTIFICATION-TYPE OBJECTS { ifIndex, hpicfBridgeLoopProtectPortLoopCount, hpicfBridgeLoopProtectPortReceiverAction } STATUS current DESCRIPTION "A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection Protocol. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later." ::= { hpicfBridgeLoopProtectNotifications 1 } hpicfBridgeVlanLoopProtectLoopDetectedNotification NOTIFICATION-TYPE OBJECTS { ifIndex, hpicfBridgeLoopProtectPortLoopCount, hpicfBridgeLoopProtectPortReceiverAction, hpicfBridgeLoopDetectedVlan } STATUS current DESCRIPTION "A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection feature while operating in VLAN mode. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later." ::= { hpicfBridgeLoopProtectNotifications 2 } -- ********************************************************************** -- Local Mirror Session Objects -- ********************************************************************** hpicfBridgeMirrorSession OBJECT IDENTIFIER ::= { hpicfBridgeObjects 6 } hpicfBridgeMirrorSessionBase OBJECT IDENTIFIER ::= { hpicfBridgeMirrorSession 1 } hpicfBridgeMirrorSessionDestination OBJECT IDENTIFIER ::= { hpicfBridgeMirrorSession 2 } hpicfBridgeMirrorSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeMirrorSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains mirror session information related to a given specified destination. A mirror session is a group of one or more portCopyEntries all having the same specified destination. A given specified destination may be associated with more then one mirror session." ::= { hpicfBridgeMirrorSessionDestination 1 } hpicfBridgeMirrorSessionEntry OBJECT-TYPE SYNTAX HpicfBridgeMirrorSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfBridgeMirrorSessionEntry contains mirror session specific identification information." AUGMENTS { portCopyEntry } ::= { hpicfBridgeMirrorSessionTable 1 } HpicfBridgeMirrorSessionEntry ::= SEQUENCE { hpicfBridgeMirrorSessionID Integer32, hpicfBridgeDontTagWithVlan INTEGER, hpicfBridgeMirrorSessionType INTEGER } hpicfBridgeMirrorSessionID OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1 destination. However, multiple sources may be related to the same hpicfBridgeMirrorSessionID. To ensure that the hpicfBridgeMirrorSessionID is properly assigned, it can only be updated when the respective portCopyEntry object is in the notReady state. For non-mirroring transfers, the value should be set to 0. " DEFVAL { 1 } ::= { hpicfBridgeMirrorSessionEntry 1 } hpicfBridgeDontTagWithVlan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This objects determines whether to include IEEE 802.1Q tag in the mirrored copy of the packet. When the value of this object is set to 1 ('enabled'), the IEEE 802.1Q VLAN tag is not included in the mirrored packet. When the value of this object is set to 2 ('disabled'), the IEEE 802.1Q VLAN tag is included in the mirrored packet. After this value is set, it is retained even after system reboot." DEFVAL { 2 } ::= { hpicfBridgeMirrorSessionEntry 2 } hpicfBridgeMirrorSessionType OBJECT-TYPE SYNTAX INTEGER { noMirror(1), mirrorAddresses(2), mirrorPolicies(3), mirrorPorts(4), mirrorVlan(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This oid mentions what is the source type of traffic associated with mirror session. noMirror Not associated with any mirroring. mirrorAddresses Mirror traffic based on addresses mirrorPolicies Mirror traffic based on policies. mirrorPorts Mirror traffic based on ports. mirrorVlan Mirror traffic based on vlan. " DEFVAL { 1 } ::= { hpicfBridgeMirrorSessionEntry 3 } -- ********************************************************************** -- Objects for enabling/disabling voice on vlan -- ********************************************************************** hpicfBridgeVoiceVlanConfig OBJECT IDENTIFIER ::= { hpicfBridgeObjects 7 } hpicfBridgeVoiceVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeVoiceVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An HP proprietary extension to the dot1qVlanStaticTable to configure a Voice VLAN." ::= { hpicfBridgeVoiceVlanConfig 1 } hpicfBridgeVoiceVlanConfigEntry OBJECT-TYPE SYNTAX HpicfBridgeVoiceVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for HP Specific extension table." AUGMENTS { dot1qVlanStaticEntry } ::= { hpicfBridgeVoiceVlanConfigTable 1 } HpicfBridgeVoiceVlanConfigEntry ::= SEQUENCE { hpicfBridgeVoiceVlanEnable TruthValue } hpicfBridgeVoiceVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Labels the VLAN as a Voice VLAN which allows to separate, prioritize, and authenticate voice traffic moving through the network." DEFVAL {false} ::= { hpicfBridgeVoiceVlanConfigEntry 1 } -- ********************************************************************** -- Objects for enabling/disabling JUMBO on interface -- ********************************************************************** hpicfBridgeJumboInterfaceConfig OBJECT IDENTIFIER ::= { hpicfBridgeObjects 8 } hpicfBridgeJumboInterfaceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeJumboInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the jumbo frame configuration of all interfaces." ::= { hpicfBridgeJumboInterfaceConfig 1 } hpicfBridgeJumboInterfaceConfigEntry OBJECT-TYPE SYNTAX HpicfBridgeJumboInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfBridgeJumboInterfaceConfigTable, which contains the jumbo frame configuration of an interface." INDEX { ifIndex } ::= { hpicfBridgeJumboInterfaceConfigTable 1 } HpicfBridgeJumboInterfaceConfigEntry ::= SEQUENCE { hpicfBridgeJumboInterfaceEnable TruthValue } hpicfBridgeJumboInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the support for jumbo frames. This configuration is supported only on VLAN interfaces." DEFVAL {false} ::= { hpicfBridgeJumboInterfaceConfigEntry 1 } -- ********************************************************************** -- Objects for manangement interface configuration -- ********************************************************************** hpicfBridgeManagementInterfaceConfig OBJECT IDENTIFIER ::= { hpicfBridgeObjects 9 } hpicfBridgeManagementInterfaceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeManagementInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects for configuring interface as Management interface." ::= { hpicfBridgeManagementInterfaceConfig 1 } hpicfBridgeManagementInterfaceConfigEntry OBJECT-TYPE SYNTAX HpicfBridgeManagementInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfBridgeManagementInterfaceConfigEntry contains objects for configuring interface as management interface." INDEX { ifIndex } ::= { hpicfBridgeManagementInterfaceConfigTable 1 } HpicfBridgeManagementInterfaceConfigEntry ::= SEQUENCE { hpicfBridgeManagementInterfaceEnable TruthValue } hpicfBridgeManagementInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures a VLAN as a Secure Management VLAN. When the value of this object is set to TRUE, a VLAN acts as a Secure Management VLAN. The default value of this object is FALSE for all VLANs. For VLAN with VID 1, which is the Secure Management VLAN of the switch by default, the value is TRUE. Only one VLAN can be configured as a Secure Management VLAN at any given time." DEFVAL {false} ::= { hpicfBridgeManagementInterfaceConfigEntry 1 } -- ********************************************************************** -- Conformance information -- ********************************************************************** hpicfBridgeConformance OBJECT IDENTIFIER ::= { hpicfBridge 2 } hpicfBridgeGroups OBJECT IDENTIFIER ::= { hpicfBridgeConformance 1 } hpicfBridgeCompliances OBJECT IDENTIFIER ::= { hpicfBridgeConformance 2 } hpicfBridgeNotGroups OBJECT IDENTIFIER ::= { hpicfBridgeConformance 3 } hpicfBridgeVlanBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeMaxVlans, hpicfBridgeVlanEnable, hpicfBridgePrimaryVlan, hpicfBridgeVlanConfigStatus } STATUS current DESCRIPTION "Basic VLAN configuration information that is not in the standard 802.1Q Bridge MIB." ::= { hpicfBridgeGroups 1 } hpicfBridgeGvrpPortGroup OBJECT-GROUP OBJECTS { hpicfBridgeGvrpRestrictedVlanReg } STATUS deprecated DESCRIPTION "********* THIS GROUP IS DEPRECATED ********* GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated. This object has been deprecated and replaced with hpicfBridgeGvrpPortGroup1" ::= { hpicfBridgeGroups 2 } hpicfBridgeRstpBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeRstpForceVersion, hpicfBridgeRstpConfigStatus, hpicfBridgeRstpProtocolVersion, hpicfBridgeRstpAdminStatus } STATUS current DESCRIPTION "Rapid Spanning Tree Protocol (RSTP) configuration information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP improves compatibility, some objects in this MIB will likely be deprecated." ::= {hpicfBridgeGroups 3 } hpicfBridgeLoopProtectBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeLoopProtectInterval, hpicfBridgeLoopProtectEnableTimer, hpicfBridgeLoopProtectTrapLoopDetectEnable, hpicfBridgeLoopProtectPortEnable, hpicfBridgeLoopProtectPortLoopDetected, hpicfBridgeLoopProtectPortLastLoopTime, hpicfBridgeLoopProtectPortLoopCount, hpicfBridgeLoopProtectPortReceiverAction } STATUS current DESCRIPTION "A collection of objects providing basic instrumentation and control of the HP Loop protection entity." ::= {hpicfBridgeGroups 4 } hpicfBridgeVoiceVlanConfigGroup OBJECT-GROUP OBJECTS { hpicfBridgeVoiceVlanEnable } STATUS current DESCRIPTION "A collection of objects for voice configuration on vlan." ::= {hpicfBridgeGroups 7 } hpicfBridgeJumboInterfaceConfigGroup OBJECT-GROUP OBJECTS { hpicfBridgeJumboInterfaceEnable } STATUS current DESCRIPTION "A collection of objects providing Jumbo configuration on a interface." ::= {hpicfBridgeGroups 8 } hpicfBridgeManagementInterfaceConfigGroup OBJECT-GROUP OBJECTS { hpicfBridgeManagementInterfaceEnable } STATUS current DESCRIPTION "A collection of objects for management interface configuration." ::= {hpicfBridgeGroups 9 } hpicfBridgeLoopProtectVLANGroup OBJECT-GROUP OBJECTS { hpicfBridgeLoopProtectMode, hpicfBridgeLoopProtectVIDList, hpicfBridgeLoopDetectedVlan } STATUS current DESCRIPTION "A collection of objects providing support for Loop Protect per VLAN feature." ::= {hpicfBridgeGroups 10 } hpicfBridgeRstpPortEntryGroup OBJECT-GROUP OBJECTS { hpicfBridgeRstpAdminEdgePort, hpicfBridgeRstpOperEdgePort, hpicfBridgeRstpAdminPointToPointMac, hpicfBridgeRstpOperPointToPointMac, hpicfBridgeRstpPortPathCost, hpicfBridgeRstpForceBpduMigrationCheck, hpicfBridgeRstpAutoEdgePort, hpicfBridgeRstpPortBpduFiltering } STATUS current DESCRIPTION "A collection of objects providing support for Rstp." ::= {hpicfBridgeGroups 11 } hpicfBridgeMirrorSessionEntryGroup OBJECT-GROUP OBJECTS { hpicfBridgeDontTagWithVlan, hpicfBridgeMirrorSessionType } STATUS current DESCRIPTION "A collection of objects providing mirror session information related to a given specific destination." ::= {hpicfBridgeGroups 12 } hpicfBridgeRstpPortEntryGroup1 OBJECT-GROUP OBJECTS { hpicfBridgeRstpPortIndex} STATUS current DESCRIPTION "A collection of objects providing support for Rstp." ::= {hpicfBridgeGroups 13 } hpicfBridgeGvrpPortGroup1 OBJECT-GROUP OBJECTS { hpicfBridgeGvrpRestrictedVlanReg, hpicfApplicantStateMachine, hpicfRegistarStateMachine } STATUS current DESCRIPTION "GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated." ::= { hpicfBridgeGroups 14 } hpicfBridgeStpBpduThrottleConfigGroup OBJECT-GROUP OBJECTS { hpicfBridgeStpBpduThrottleStatus, hpicfBridgeStpBpduThrottleValue } STATUS current DESCRIPTION "A group of objects that are used to configure the BPDU Throttling feature." ::= { hpicfBridgeGroups 15} -- ********************************************************************** -- Notification groups -- ********************************************************************** hpicfBridgeLoopProtectNotGrp NOTIFICATION-GROUP NOTIFICATIONS { hpicfBridgeLoopProtectLoopDetectedNotification } STATUS current DESCRIPTION "Notifications for Loop protection." ::= { hpicfBridgeNotGroups 1 } hpicfBridgeVlanLoopProtectNotGrp NOTIFICATION-GROUP NOTIFICATIONS { hpicfBridgeVlanLoopProtectLoopDetectedNotification } STATUS current DESCRIPTION "Notifications for Loop protect per VLAN" ::= { hpicfBridgeNotGroups 2 } hpicfBridgeMirrorSessionBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeMirrorSessionID } STATUS current DESCRIPTION "A collection of objects providing identification of a mirroring session entity." ::= {hpicfBridgeGroups 5 } -- ********************************************************************** -- Compliance statements -- ********************************************************************** hpicfBridgeCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1Q VLAN support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 1 } hpicfBridgeComplianceRevTwo MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 2 } hpicfBridgeComplianceRevThree MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 3 } hpicfBridgeComplianceRevFour MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeMirrorSessionBaseGroup DESCRIPTION "Support for this group is mandatory for switches that implement the multi session mirroring (intelligent mirroring) feature." ::= { hpicfBridgeCompliances 4 } hpicfBridgeLoopProtectCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches with support for hpicfBridge loop protection objects." MODULE MANDATORY-GROUPS { hpicfBridgeLoopProtectBaseGroup, hpicfBridgeLoopProtectNotifications } GROUP hpicfBridgeLoopProtectBaseGroup DESCRIPTION "Support for this group is mandatory for switches that implement the loop protection feature." GROUP hpicfBridgeLoopProtectNotifications DESCRIPTION "Implementation of this group is mandatory for switches that implement the loop protection feature." ::= { hpicfBridgeCompliances 5 } hpicfBridgeVlanBaseConfigCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support basic vlan configuration." MODULE MANDATORY-GROUPS { hpicfBridgeVoiceVlanConfigGroup } ::= { hpicfBridgeCompliances 6 } hpicfBridgeInterfaceConfigCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support basic interface configuration." MODULE MANDATORY-GROUPS { hpicfBridgeJumboInterfaceConfigGroup, hpicfBridgeManagementInterfaceConfigGroup } ::= { hpicfBridgeCompliances 7 } hpicfBridgeVlanLoopProtConfigCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support loop protect per VLAN feature." MODULE MANDATORY-GROUPS { hpicfBridgeLoopProtectVLANGroup, hpicfBridgeVlanLoopProtectNotGrp, hpicfBridgeLoopProtectNotGrp } ::= { hpicfBridgeCompliances 8 } hpicfBridgeRstpPortEntryCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support Rstp." MODULE MANDATORY-GROUPS { hpicfBridgeRstpPortEntryGroup } ::= { hpicfBridgeCompliances 9 } hpicfBridgeMirrorSessionEntryCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support mirror sessions." MODULE MANDATORY-GROUPS { hpicfBridgeMirrorSessionEntryGroup } ::= { hpicfBridgeCompliances 10 } hpicfBridgeRstpPortEntryCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches that support Rstp." MODULE MANDATORY-GROUPS { hpicfBridgeRstpPortEntryGroup1 } ::= { hpicfBridgeCompliances 11 } hpicfBridgeComplianceRevFour1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup1 DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeMirrorSessionBaseGroup DESCRIPTION "Support for this group is mandatory for switches that implement the multi session mirroring (intelligent mirroring) feature." ::= { hpicfBridgeCompliances 12 } hpicfBridgeStpBpduThrottleConfigCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the MSTP BPDU Throttling feature." MODULE MANDATORY-GROUPS { hpicfBridgeStpBpduThrottleConfigGroup } ::= {hpicfBridgeCompliances 13} END