HP-ENTITY-POWER-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI

    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF

    entPhysicalIndex
        FROM ENTITY-MIB

    hpSwitch
        FROM HP-ICF-OID;

hpEntityPowerMIB  MODULE-IDENTITY
    LAST-UPDATED "201004110000Z"  -- Apr 11, 2010
    ORGANIZATION "HP Networking"
    CONTACT-INFO "Hewlett-Packard Company
                  8000 Foothills Blvd.
                  Roseville, CA - 95747."
    DESCRIPTION  "This MIB defines HP proprietary objects that can be used to
                  set the power status of physical entities and report power
                  usage statistics."

    REVISION     "201004110000Z"  -- Apr 11, 2010
    DESCRIPTION  "Initial version of this MIB"
    ::= { hpSwitch 71 }

-- **********************************************************************
-- Entity Power Objects
-- **********************************************************************

    hpEntPowerObjects OBJECT IDENTIFIER ::= { hpEntityPowerMIB 1 }

    hpEntPowerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpEntPowerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table of information about the power status of entities.
                 This is a sparse augment of the entPhysicalTable.  Entries
                 appear in this table for values of
                 entPhysicalClass [RFC4133] that in this implementation
                 are able to report any of the power state or status stored in
                 this table."
    ::= { hpEntPowerObjects 1 }

    hpEntPowerEntry OBJECT-TYPE
    SYNTAX      HpEntPowerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Power related information about this physical entity."
    INDEX       { entPhysicalIndex }
    ::= { hpEntPowerTable 1 }

    HpEntPowerEntry ::= 
        SEQUENCE {
            hpEntPowerMaxPowerUsage      Unsigned32,
            hpEntPowerMinPowerUsage      Unsigned32,
            hpEntPowerCurrentPowerUsage  Unsigned32
        }

    hpEntPowerMaxPowerUsage OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This MIB object returns the maximum power
                     usage of this entity. This would typically correspond to
                     the maximum power rating of the entity."
        ::= { hpEntPowerEntry 1 }

    hpEntPowerMinPowerUsage OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This MIB object returns the minimum power usage of
                     this entity. This is applicable only to those entities 
                     that can be administratively set to function in a low
                     power state."
        ::= { hpEntPowerEntry 2 }

    hpEntPowerCurrentPowerUsage OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This MIB object returns the current power usage of this
                     entity. For entities that cannot be set to function in a
                     low power mode, the value returned by this object would be
                     the same as that of entPowerMaxPowerUsage. For entities
                     that are set to function in a low power mode, the value
                     returned would be the same as that of 
                     entPowerMinPowerUsage."
        ::= { hpEntPowerEntry 3 }

-- **********************************************************************
-- Conformance and Compliance
-- **********************************************************************

    hpEntPowerConformance OBJECT IDENTIFIER ::= { hpEntityPowerMIB 2 }

    hpEntPowerCompliances OBJECT IDENTIFIER
        ::= { hpEntPowerConformance 1 }

    hpEntPowerCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION "The compliance statement for systems supporting
                the HP Entity Power MIB."
    MODULE -- this module
    MANDATORY-GROUPS {
       hpEntPowerGroup
    }
    ::= { hpEntPowerCompliances 1 }

    hpEntPowerGroups OBJECT IDENTIFIER ::= { hpEntPowerConformance 2 }

    hpEntPowerGroup OBJECT-GROUP
        OBJECTS {
            hpEntPowerMaxPowerUsage,
            hpEntPowerMinPowerUsage,
            hpEntPowerCurrentPowerUsage
        }
    STATUS   current
    DESCRIPTION "HP proprietary Entity Power group."
    ::= { hpEntPowerGroups 1 }

END