-- ==================================================================== -- Copyright (c) 2004-2017 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: The MIB is designed to get IPsec tunnels' statistic information. -- Reference: -- Version: 1.1 -- History: -- V1.0: The initial version created by Wanghaisheng and Weiyanheng. -- V1.1: 2017-10-31 Added h3cIPsecTunnelStatByDescripV2Table,h3cIPsecConnectionStopV2, -- h3cIPsecConnectionStartV2,h3cIPsecConnectionStopCntlV2 and -- h3cIPsecConnectionStartCntlV2 by shihaohao -- ===================================================================== H3C-IPSEC-MONITOR-V2-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM RFC1213-MIB InterfaceIndex FROM IF-MIB DisplayString, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC Integer32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, Gauge32, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF h3cCommon FROM HUAWEI-3COM-OID-MIB; h3cIPsecMonitorV2 MODULE-IDENTITY LAST-UPDATED "201710311650Z" ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085" DESCRIPTION "The MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels." REVISION "201710311650Z" DESCRIPTION "Add the objects of h3cIPsecTunnelStatByDescripV2Table,h3cIPsecConnectionStopV2, h3cIPsecConnectionStartV2,h3cIPsecConnectionStopCntlV2 and h3cIPsecConnectionStartCntlV2." REVISION "201206270000Z" DESCRIPTION "Initial version." ::= { h3cCommon 126 } H3cIPsecDiffHellmanGrpV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Diffie Hellman Group used in the IKE and IPsec negotiations. invalidGroup(2147483647) is defined as invalid value." SYNTAX INTEGER { none(0), dhGroup1(1), dhGroup2(2), dhGroup5(5), dhGroup14(14), dhGroup24(24), invalidGroup(2147483647) } H3cIPsecEncapModeV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The encapsulation mode used by an IPsec Phase-2 Tunnel. invalidMode(2147483647) is defined as invalid value." SYNTAX INTEGER { tunnel(1), transport(2), invalidMode(2147483647) } H3cIPsecEncryptAlgoV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The encryption algorithm used in the IKE and IPsec negotiations. invalidAlg(2147483647) is defined as invalid value." SYNTAX INTEGER { none(0), desCbc(1), ideaCbc(2), blowfishCbc(3), rc5R16B64Cbc(4), tripleDesCbc(5), castCbc(6), aesCbc(7), nsaCbc(8), aesCbc128(9), aesCbc192(10), aesCbc256(11), aesCtr(12), aesCamelliaCbc(13), rc4(14), invalidAlg(2147483647) } H3cIPsecAuthAlgoV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication algorithm used in the IKE negotiations. invalidAlg(2147483647) is defined as invalid value." SYNTAX INTEGER { none(0), md5(1), sha1(2), sha256(3), sha384(4), sha512(5), invalidAlg(2147483647) } H3cIPsecSaProtocolV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The protocol of security association." SYNTAX INTEGER { reserved(0), ah(2), esp(3), ipcomp(4) } H3cIPsecIDTypeV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of IPsec Identity." SYNTAX INTEGER { reserved(0), ipv4Addr(1), fqdn(2), -- fully-qualified domain name userFqdn(3), -- fully-qualified username ipv4AddrSubnet(4), ipv6Addr(5), ipv6AddrSubnet(6), ipv4AddrRange(7), ipv6AddrRange(8), derAsn1Dn(9), -- the binary DER encoding of an ASN.1 X.500 Distinguished -- Name [X.501] of the princIPal whose certificates are -- being exchanged to establish the SA. derAsn1Gn(10), -- the binary DER encoding of an ASN.1 X.500 GeneralName -- [X.509] of the princIPal whose certificates are being -- exchanged to establish the SA. keyId(11) -- specifies an opaque byte stream which may be used to -- pass vendor-specific information necessary to identify -- which pre-shared key should be used to authenticate -- Aggressive mode negotiations. } H3cIPsecTrafficTypeV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of the data flow." SYNTAX INTEGER { ipv4Addr(1), ipv4AddrSubnet(4), ipv6Addr(5), ipv6AddrSubnet(6), ipv4AddrRange(7), ipv6AddrRange(8) } H3cIPsecNegoTypeV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of key used by an IPsec Phase-2 Tunnel. invalidType(2147483647) is defined as invalid value." SYNTAX INTEGER { ike(1), manual(2), invalidType(2147483647) } H3cIPsecTunnelStateV2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of IPsec tunnel." SYNTAX INTEGER { active(1), timeout(2) } -- ======================================================================== -- Node definitions -- ======================================================================== -- Begin the node of h3cIPsecObjectsV2. h3cIPsecObjectsV2 OBJECT IDENTIFIER ::= { h3cIPsecMonitorV2 1 } -- ======================================= -- Begin the h3cIPsecScalarObjectsV2. -- ======================================= h3cIPsecScalarObjectsV2 OBJECT IDENTIFIER ::= { h3cIPsecObjectsV2 1 } h3cIPsecMIBVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version string of this MIB." ::= { h3cIPsecScalarObjectsV2 1 } -- =============================================== -- Begin the table of h3cIPsecTunnelV2Table. -- =============================================== h3cIPsecTunnelV2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cIPsecTunnelV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel." ::= { h3cIPsecObjectsV2 2 } h3cIPsecTunnelV2Entry OBJECT-TYPE SYNTAX H3cIPsecTunnelV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about h3cIPsecTunnelV2Table." INDEX { h3cIPsecTunIndexV2 } ::= { h3cIPsecTunnelV2Table 1 } H3cIPsecTunnelV2Entry ::= SEQUENCE { h3cIPsecTunIndexV2 Integer32, h3cIPsecTunIfIndexV2 InterfaceIndex, h3cIPsecTunIKETunnelIndexV2 Integer32, h3cIPsecTunIKETunLocalIDTypeV2 H3cIPsecIDTypeV2, h3cIPsecTunIKETunLocalIDVal1V2 DisplayString, h3cIPsecTunIKETunLocalIDVal2V2 DisplayString, h3cIPsecTunIKETunRemoteIDTypeV2 H3cIPsecIDTypeV2, h3cIPsecTunIKETunRemoteIDVal1V2 DisplayString, h3cIPsecTunIKETunRemoteIDVal2V2 DisplayString, h3cIPsecTunLocalAddrTypeV2 InetAddressType, h3cIPsecTunLocalAddrV2 InetAddress, h3cIPsecTunRemoteAddrTypeV2 InetAddressType, h3cIPsecTunRemoteAddrV2 InetAddress, h3cIPsecTunKeyTypeV2 H3cIPsecNegoTypeV2, h3cIPsecTunEncapModeV2 H3cIPsecEncapModeV2, h3cIPsecTunInitiatorV2 INTEGER, h3cIPsecTunLifeSizeV2 Gauge32, h3cIPsecTunLifeTimeV2 Integer32, h3cIPsecTunRemainTimeV2 Integer32, h3cIPsecTunActiveTimeV2 Integer32, h3cIPsecTunRemainSizeV2 Gauge32, h3cIPsecTunTotalRefreshesV2 Counter32, h3cIPsecTunCurrentSaInstancesV2 Gauge32, h3cIPsecTunInSaEncryptAlgoV2 H3cIPsecEncryptAlgoV2, h3cIPsecTunInSaAhAuthAlgoV2 H3cIPsecAuthAlgoV2, h3cIPsecTunInSaEspAuthAlgoV2 H3cIPsecAuthAlgoV2, h3cIPsecTunDiffHellmanGrpV2 H3cIPsecDiffHellmanGrpV2, h3cIPsecTunOutSaEncryptAlgoV2 H3cIPsecEncryptAlgoV2, h3cIPsecTunOutSaAhAuthAlgoV2 H3cIPsecAuthAlgoV2, h3cIPsecTunOutSaEspAuthAlgoV2 H3cIPsecAuthAlgoV2, h3cIPsecTunPolicyNameV2 OCTET STRING, h3cIPsecTunPolicyNumV2 Integer32, h3cIPsecTunStatusV2 INTEGER, h3cIPsecTunPolicyDescriptionV2 OCTET STRING } h3cIPsecTunIndexV2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2147483647." ::= { h3cIPsecTunnelV2Entry 1 } h3cIPsecTunIfIndexV2 OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index( the ifIndex of ifTable )." ::= { h3cIPsecTunnelV2Entry 2 } h3cIPsecTunIKETunnelIndexV2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the associated IPsec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 3 } h3cIPsecTunIKETunLocalIDTypeV2 OBJECT-TYPE SYNTAX H3cIPsecIDTypeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable)." ::= { h3cIPsecTunnelV2Entry 4 } h3cIPsecTunIKETunLocalIDVal1V2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable). If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer. If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations." ::= { h3cIPsecTunnelV2Entry 5 } h3cIPsecTunIKETunLocalIDVal2V2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The second specification of the local peer's IP address for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the IKETunnelTable). If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the local peer type is others, this is a zero-length string." ::= { h3cIPsecTunnelV2Entry 6 } h3cIPsecTunIKETunRemoteIDTypeV2 OBJECT-TYPE SYNTAX H3cIPsecIDTypeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable)." ::= { h3cIPsecTunnelV2Entry 7 } h3cIPsecTunIKETunRemoteIDVal1V2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable). If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer. If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations." ::= { h3cIPsecTunnelV2Entry 8 } h3cIPsecTunIKETunRemoteIDVal2V2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string." ::= { h3cIPsecTunnelV2Entry 9 } h3cIPsecTunLocalAddrTypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the IP address for the local peer of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 10 } h3cIPsecTunLocalAddrV2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the local peer for the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 11 } h3cIPsecTunRemoteAddrTypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the IP address for the remote peer of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 12 } h3cIPsecTunRemoteAddrV2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the remote peer for the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 13 } h3cIPsecTunKeyTypeV2 OBJECT-TYPE SYNTAX H3cIPsecNegoTypeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The key negotiate mode used by the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 14 } h3cIPsecTunEncapModeV2 OBJECT-TYPE SYNTAX H3cIPsecEncapModeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The encapsulation mode used by the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 15 } h3cIPsecTunInitiatorV2 OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), none(2147483647) } MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator of this IPsec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method." ::= { h3cIPsecTunnelV2Entry 16 } h3cIPsecTunLifeSizeV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 17 } h3cIPsecTunLifeTimeV2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 18 } h3cIPsecTunRemainTimeV2 OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The remain time of SA in seconds. 2147483647 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 19 } h3cIPsecTunActiveTimeV2 OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The duration the IPsec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 20 } h3cIPsecTunRemainSizeV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The remain LifeSize of SA in kilobytes. 0 is defined as invalid value." ::= { h3cIPsecTunnelV2Entry 21 } h3cIPsecTunTotalRefreshesV2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of security association refreshing performed." ::= { h3cIPsecTunnelV2Entry 22 } h3cIPsecTunCurrentSaInstancesV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of security associations which are currently active or expiring." ::= { h3cIPsecTunnelV2Entry 23 } h3cIPsecTunInSaEncryptAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecEncryptAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 24 } h3cIPsecTunInSaAhAuthAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecAuthAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 25 } h3cIPsecTunInSaEspAuthAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecAuthAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 26 } h3cIPsecTunDiffHellmanGrpV2 OBJECT-TYPE SYNTAX H3cIPsecDiffHellmanGrpV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The Diffie Hellman Group used by the security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 27 } h3cIPsecTunOutSaEncryptAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecEncryptAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 28 } h3cIPsecTunOutSaAhAuthAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecAuthAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 29 } h3cIPsecTunOutSaEspAuthAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecAuthAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelV2Entry 30 } h3cIPsecTunPolicyNameV2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The policy name used by this IPsec tunnel." ::= { h3cIPsecTunnelV2Entry 31 } h3cIPsecTunPolicyNumV2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of policy used by this IPsec tunnel." ::= { h3cIPsecTunnelV2Entry 32 } h3cIPsecTunStatusV2 OBJECT-TYPE SYNTAX INTEGER { initial(1), ready(2), rekeyed(3), closed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the IPsec Tunnel." ::= { h3cIPsecTunnelV2Entry 33 } h3cIPsecTunPolicyDescriptionV2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPsec policy description of an IPsec tunne." ::= { h3cIPsecTunnelV2Entry 34 } -- =============================================== -- Begin the table of h3cIPsecTunnelStatV2Table. -- =============================================== h3cIPsecTunnelStatV2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cIPsecTunnelStatV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPsec Phase-2 Tunnel Statistics Table." ::= { h3cIPsecObjectsV2 3 } h3cIPsecTunnelStatV2Entry OBJECT-TYPE SYNTAX H3cIPsecTunnelStatV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about h3cIPsecTunnelStatV2Table." INDEX { h3cIPsecTunIndexV2 } ::= { h3cIPsecTunnelStatV2Table 1 } H3cIPsecTunnelStatV2Entry ::= SEQUENCE { h3cIPsecTunInOctetsV2 Counter64, h3cIPsecTunInDecompOctetsV2 Counter64, h3cIPsecTunInPktsV2 Counter64, h3cIPsecTunInDropPktsV2 Counter64, h3cIPsecTunInReplayDropPktsV2 Counter64, h3cIPsecTunInAuthFailsV2 Counter64, h3cIPsecTunInDecryptFailsV2 Counter64, h3cIPsecTunOutOctetsV2 Counter64, h3cIPsecTunOutUncompOctetsV2 Counter64, h3cIPsecTunOutPktsV2 Counter64, h3cIPsecTunOutDropPktsV2 Counter64, h3cIPsecTunOutEncryptFailsV2 Counter64, h3cIPsecTunNoMemoryDropPktsV2 Counter64, h3cIPsecTunQueueFullDropPktsV2 Counter64, h3cIPsecTunInvalidLenDropPktsV2 Counter64, h3cIPsecTunTooLongDropPktsV2 Counter64, h3cIPsecTunInvalidSaDropPktsV2 Counter64 } h3cIPsecTunInOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed." ::= { h3cIPsecTunnelStatV2Entry 1 } h3cIPsecTunInDecompOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed." ::= { h3cIPsecTunnelStatV2Entry 2 } h3cIPsecTunInPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 3 } h3cIPsecTunInDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during receiving process by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 4 } h3cIPsecTunInReplayDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during receiving process due to Anti-Replay process by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 5 } h3cIPsecTunInAuthFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 6 } h3cIPsecTunInDecryptFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 7 } h3cIPsecTunOutOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed." ::= { h3cIPsecTunnelStatV2Entry 8 } h3cIPsecTunOutUncompOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed." ::= { h3cIPsecTunnelStatV2Entry 9 } h3cIPsecTunOutPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 10 } h3cIPsecTunOutDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during sending process by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 11 } h3cIPsecTunOutEncryptFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 12 } h3cIPsecTunNoMemoryDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to no enough memory by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 13 } h3cIPsecTunQueueFullDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to queue full by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 14 } h3cIPsecTunInvalidLenDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to invalid length packet by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 15 } h3cIPsecTunTooLongDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to too long packet by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 16 } h3cIPsecTunInvalidSaDropPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to invalid SA by this IPsec Phase-2 Tunnel." ::= { h3cIPsecTunnelStatV2Entry 17 } -- =============================================== -- Begin the table of h3cIPsecSaV2Table. -- =============================================== h3cIPsecSaV2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cIPsecSaV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association." ::= { h3cIPsecObjectsV2 4 } h3cIPsecSaV2Entry OBJECT-TYPE SYNTAX H3cIPsecSaV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about h3cIPsecSaV2Table." INDEX { h3cIPsecTunIndexV2,h3cIPsecSaIndexV2 } ::= { h3cIPsecSaV2Table 1 } H3cIPsecSaV2Entry ::= SEQUENCE { h3cIPsecSaIndexV2 Integer32, h3cIPsecSaDirectionV2 INTEGER, h3cIPsecSaSpiValueV2 Unsigned32, h3cIPsecSaSecProtocolV2 H3cIPsecSaProtocolV2, h3cIPsecSaEncryptAlgoV2 H3cIPsecEncryptAlgoV2, h3cIPsecSaAuthAlgoV2 H3cIPsecAuthAlgoV2, h3cIPsecSaStatusV2 INTEGER } h3cIPsecSaIndexV2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647." ::= { h3cIPsecSaV2Entry 1 } h3cIPsecSaDirectionV2 OBJECT-TYPE SYNTAX INTEGER { in(1), out(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the SA." ::= { h3cIPsecSaV2Entry 2 } h3cIPsecSaSpiValueV2 OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the SPI." ::= { h3cIPsecSaV2Entry 3 } h3cIPsecSaSecProtocolV2 OBJECT-TYPE SYNTAX H3cIPsecSaProtocolV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The security protocol of the SA." ::= { h3cIPsecSaV2Entry 4 } h3cIPsecSaEncryptAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecEncryptAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used by the security association of the IPsec Phase-2 Tunnel." ::= { h3cIPsecSaV2Entry 5 } h3cIPsecSaAuthAlgoV2 OBJECT-TYPE SYNTAX H3cIPsecAuthAlgoV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication algorithm used by the SA." ::= { h3cIPsecSaV2Entry 6 } h3cIPsecSaStatusV2 OBJECT-TYPE SYNTAX INTEGER { active(1), expiring(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the SA." ::= { h3cIPsecSaV2Entry 7 } -- =============================================== -- Begin the table of h3cIPsecTrafficV2Table. -- =============================================== h3cIPsecTrafficV2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cIPsecTrafficV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPsec Phase-2 Tunnel Traffic Table." ::= { h3cIPsecObjectsV2 5 } h3cIPsecTrafficV2Entry OBJECT-TYPE SYNTAX H3cIPsecTrafficV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about h3cIPsecTrafficV2Table." INDEX { h3cIPsecTunIndexV2 } ::= { h3cIPsecTrafficV2Table 1 } H3cIPsecTrafficV2Entry ::= SEQUENCE { h3cIPsecTrafficLocalTypeV2 H3cIPsecTrafficTypeV2, h3cIPsecTrafficLocalAddr1TypeV2 InetAddressType, h3cIPsecTrafficLocalAddr1V2 InetAddress, h3cIPsecTrafficLocalAddr2TypeV2 InetAddressType, h3cIPsecTrafficLocalAddr2V2 InetAddress, h3cIPsecTrafficLocalProtocol1V2 Integer32, h3cIPsecTrafficLocalProtocol2V2 Integer32, h3cIPsecTrafficLocalPort1V2 Integer32, h3cIPsecTrafficLocalPort2V2 Integer32, h3cIPsecTrafficRemoteTypeV2 H3cIPsecTrafficTypeV2, h3cIPsecTrafficRemAddr1TypeV2 InetAddressType, h3cIPsecTrafficRemAddr1V2 InetAddress, h3cIPsecTrafficRemAddr2TypeV2 InetAddressType, h3cIPsecTrafficRemAddr2V2 InetAddress, h3cIPsecTrafficRemoPro1V2 Integer32, h3cIPsecTrafficRemoPro2V2 Integer32, h3cIPsecTrafficRemPort1V2 Integer32, h3cIPsecTrafficRemPort2V2 Integer32 } h3cIPsecTrafficLocalTypeV2 OBJECT-TYPE SYNTAX H3cIPsecTrafficTypeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the local peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet" ::= { h3cIPsecTrafficV2Entry 1 } h3cIPsecTrafficLocalAddr1TypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the first IP address specification for the local peer's traffic." ::= { h3cIPsecTrafficV2Entry 2 } h3cIPsecTrafficLocalAddr1V2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The first IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet address. If the local peer's traffic type is IP address range, this is the beginning IP address of the range." ::= { h3cIPsecTrafficV2Entry 3 } h3cIPsecTrafficLocalAddr2TypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the second IP address specification for the local peer's traffic." ::= { h3cIPsecTrafficV2Entry 4 } h3cIPsecTrafficLocalAddr2V2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet mask. If the local peer's traffic type is IP address range, this is the ending IP address of the range." ::= { h3cIPsecTrafficV2Entry 5 } h3cIPsecTrafficLocalProtocol1V2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The first protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the beginning protocol number of the range." ::= { h3cIPsecTrafficV2Entry 6 } h3cIPsecTrafficLocalProtocol2V2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The second protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the ending protocol number of the range." ::= { h3cIPsecTrafficV2Entry 7 } h3cIPsecTrafficLocalPort1V2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The first port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the beginning port number of the range." ::= { h3cIPsecTrafficV2Entry 8 } h3cIPsecTrafficLocalPort2V2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The second port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the ending port number of the range." ::= { h3cIPsecTrafficV2Entry 9 } h3cIPsecTrafficRemoteTypeV2 OBJECT-TYPE SYNTAX H3cIPsecTrafficTypeV2 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the remote peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet" ::= { h3cIPsecTrafficV2Entry 10 } h3cIPsecTrafficRemAddr1TypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the first IP address specification for the remote peer's traffic." ::= { h3cIPsecTrafficV2Entry 11 } h3cIPsecTrafficRemAddr1V2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The first IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet address. If the remote traffic type is IP address range, this is the beginning IP address of the range." ::= { h3cIPsecTrafficV2Entry 12 } h3cIPsecTrafficRemAddr2TypeV2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the second IP address specification for the remote peer's traffic." ::= { h3cIPsecTrafficV2Entry 13 } h3cIPsecTrafficRemAddr2V2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet mask. If the remote traffic type is IP address range, this is the ending IP address of the range." ::= { h3cIPsecTrafficV2Entry 14 } h3cIPsecTrafficRemoPro1V2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The first protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the beginning protocol number of the range." ::= { h3cIPsecTrafficV2Entry 15 } h3cIPsecTrafficRemoPro2V2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The second protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the ending protocol number of the range." ::= { h3cIPsecTrafficV2Entry 16 } h3cIPsecTrafficRemPort1V2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The first port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the beginning port number of the range." ::= { h3cIPsecTrafficV2Entry 17 } h3cIPsecTrafficRemPort2V2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The second port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the ending port number of the range." ::= { h3cIPsecTrafficV2Entry 18 } -- =============================================== -- Begin the h3cIPsecGlobalStatsV2. -- =============================================== h3cIPsecGlobalStatsV2 OBJECT IDENTIFIER ::= { h3cIPsecObjectsV2 6 } h3cIPsecGlobalActiveTunnelsV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of currently active IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 1 } h3cIPsecGlobalActiveSasV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of currently active or expiring IPsec Phase-2 SA." ::= { h3cIPsecGlobalStatsV2 2 } h3cIPsecGlobalInOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed." ::= { h3cIPsecGlobalStatsV2 3 } h3cIPsecGlobalInDecompOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed." ::= { h3cIPsecGlobalStatsV2 4 } h3cIPsecGlobalInPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 5 } h3cIPsecGlobalInDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during receiving process by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 6 } h3cIPsecGlobalInReplayDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 7 } h3cIPsecGlobalInAuthFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 8 } h3cIPsecGlobalInDecryptFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 9 } h3cIPsecGlobalOutOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed." ::= { h3cIPsecGlobalStatsV2 10 } h3cIPsecGlobalOutUncompOctetsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed." ::= { h3cIPsecGlobalStatsV2 11 } h3cIPsecGlobalOutPktsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 12 } h3cIPsecGlobalOutDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped during sending process by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 13 } h3cIPsecGlobalOutEncryptFailsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 14 } h3cIPsecGlobalNoMemoryDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to no enough memory by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 15 } h3cIPsecGlobalNoFindSaDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to not find SA by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 16 } h3cIPsecGlobalQueueFullDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to queue full by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 17 } h3cIPsecGlobalInvalidLenDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to invalid packet length by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 18 } h3cIPsecGlobalTooLongDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to too long packet by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 19 } h3cIPsecGlobalInvalidSaDropsV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to invalid SA by all current and previous IPsec Phase-2 Tunnels." ::= { h3cIPsecGlobalStatsV2 20 } -- =============================================== -- Begin the h3cIPsecTrapObjectV2. -- =============================================== h3cIPsecTrapObjectV2 OBJECT IDENTIFIER ::= { h3cIPsecObjectsV2 7 } h3cIPsecPolicyNameV2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..63)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPsec policy name with a trap." ::= { h3cIPsecTrapObjectV2 1 } h3cIPsecPolicySeqNumV2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPsec policy sequence number with a trap." ::= { h3cIPsecTrapObjectV2 2 } h3cIPsecPolicySizeV2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of IPsec policies with a trap." ::= { h3cIPsecTrapObjectV2 3 } -- =============================================== -- Begin the h3cIPsecTrapCntlV2. -- =============================================== h3cIPsecTrapCntlV2 OBJECT IDENTIFIER ::= { h3cIPsecObjectsV2 8 } h3cIPsecTrapGlobalCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether all IPsec traps should be generated." ::= { h3cIPsecTrapCntlV2 1 } h3cIPsecTunnelStartTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecTunnelStartV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 2 } h3cIPsecTunnelStopTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecTunnelStopV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 3 } h3cIPsecNoSaTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecNoSaFailureV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 4 } h3cIPsecAuthFailureTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecAuthFailFailureV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 5 } h3cIPsecEncryFailureTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecEncryFailFailureV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 6 } h3cIPsecDecryFailureTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecDecryFailFailureV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 7 } h3cIPsecInvalidSaTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecInvalidSaFailureV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 8 } h3cIPsecPolicyAddTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecPolicyAddV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 9 } h3cIPsecPolicyDelTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecPolicyDelV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 10 } h3cIPsecPolicyAttachTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecPolicyAttachV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 11 } h3cIPsecPolicyDetachTrapCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecPolicyDetachV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 12 } h3cIPsecConnectionStartCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecConnectionStartV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 13 } h3cIPsecConnectionStopCntlV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether h3cIPsecConnectionStopV2 traps should be generated." ::= { h3cIPsecTrapCntlV2 14 } -- =============================================== -- definition of traps. -- =============================================== h3cIPsecTrapV2 OBJECT IDENTIFIER ::= { h3cIPsecObjectsV2 9 } h3cIPsecNotificationsV2 OBJECT IDENTIFIER ::= { h3cIPsecTrapV2 0 } h3cIPsecTunnelStartV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2, h3cIPsecTunLifeTimeV2, h3cIPsecTunLifeSizeV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec Phase-2 Tunnel is created." ::= { h3cIPsecNotificationsV2 1 } h3cIPsecTunnelStopV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2, h3cIPsecTunActiveTimeV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec Phase-2 Tunnel is deleted." ::= { h3cIPsecNotificationsV2 2 } h3cIPsecNoSaFailureV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec Phase-2 non-existent SA error occurs." ::= { h3cIPsecNotificationsV2 3 } h3cIPsecAuthFailFailureV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2 } STATUS current DESCRIPTION "This notification is generated when the IPsec phase-2 authentication failure occurs." ::= { h3cIPsecNotificationsV2 4 } h3cIPsecEncryFailFailureV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2 } STATUS current DESCRIPTION "This notification is generated when the IPsec phase-2 tunnel has an encrypting failure." ::= { h3cIPsecNotificationsV2 5 } h3cIPsecDecryFailFailureV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2 } STATUS current DESCRIPTION "This notification is generated when the IPsec phase-2 tunnel has a decrypting failure." ::= { h3cIPsecNotificationsV2 6 } h3cIPsecInvalidSaFailureV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecTunIndexV2, h3cIPsecSaIndexV2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2, h3cIPsecSaSpiValueV2 } STATUS current DESCRIPTION "This notification is generated when the IPsec phase-2 invalid SA failure occurs." ::= { h3cIPsecNotificationsV2 7 } h3cIPsecPolicyAddV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyNameV2, h3cIPsecPolicySeqNumV2, h3cIPsecPolicySizeV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec policy is added." ::= { h3cIPsecNotificationsV2 8 } h3cIPsecPolicyDelV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyNameV2, h3cIPsecPolicySeqNumV2, h3cIPsecPolicySizeV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec policy is deleted." ::= { h3cIPsecNotificationsV2 9 } h3cIPsecPolicyAttachV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyNameV2, h3cIPsecPolicySizeV2, ifIndex } STATUS current DESCRIPTION "This notification is generated when an IPsec policy is attached with one interface." ::= { h3cIPsecNotificationsV2 10 } h3cIPsecPolicyDetachV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyNameV2, h3cIPsecPolicySizeV2, ifIndex } STATUS current DESCRIPTION "This notification is generated when an IPsec policy is detached with one interface." ::= { h3cIPsecNotificationsV2 11 } h3cIPsecConnectionStartV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyDescripV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec connection is created." ::= { h3cIPsecNotificationsV2 12 } h3cIPsecConnectionStopV2 NOTIFICATION-TYPE OBJECTS { h3cIPsecPolicyDescripV2 } STATUS current DESCRIPTION "This notification is generated when an IPsec connection is terminated." ::= { h3cIPsecNotificationsV2 13 } -- =============================================== -- Begin the table of h3cIPsecTunnelStatByDescripV2Table. -- =============================================== h3cIPsecTunnelStatByDescripV2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cIPsecTunnelStatByDescripV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IPsec phase-2 tunnel statistics by description." ::= { h3cIPsecObjectsV2 10 } h3cIPsecTunnelStatByDescripV2Entry OBJECT-TYPE SYNTAX H3cIPsecTunnelStatByDescripV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of IPsec phase-2 tunnels statistics by description table." INDEX { h3cIPsecPolicyDescripV2 } ::= { h3cIPsecTunnelStatByDescripV2Table 1 } H3cIPsecTunnelStatByDescripV2Entry ::= SEQUENCE { h3cIPsecPolicyDescripV2 OCTET STRING, h3cIPsecTunInOctetsByDescripV2 Counter64, h3cIPsecTunInDecompOctetsByDescripV2 Counter64, h3cIPsecTunInPktsByDescripV2 Counter64, h3cIPsecTunInDropPktsByDescripV2 Counter64, h3cIPsecTunInReplayDropPktsByDescripV2 Counter64, h3cIPsecTunInAuthFailsByDescripV2 Counter64, h3cIPsecTunInDecryptFailsByDescripV2 Counter64, h3cIPsecTunOutOctetsByDescripV2 Counter64, h3cIPsecTunOutUncompOctetsByDescripV2 Counter64, h3cIPsecTunOutPktsByDescripV2 Counter64, h3cIPsecTunOutDropPktsByDescripV2 Counter64, h3cIPsecTunOutEncryptFailsByDescripV2 Counter64, h3cIPsecTunNoMemoryDropPktsByDescripV2 Counter64, h3cIPsecTunQueueFullDropPktsByDescripV2 Counter64, h3cIPsecTunInvalidLenDropPktsByDescripV2 Counter64, h3cIPsecTunTooLongDropPktsByDescripV2 Counter64, h3cIPsecTunInvalidSaDropPktsByDescripV2 Counter64 } h3cIPsecPolicyDescripV2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..80)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPsec policy's description." ::= { h3cIPsecTunnelStatByDescripV2Entry 1 } h3cIPsecTunInOctetsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received by IPsec phase-2 tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed." ::= { h3cIPsecTunnelStatByDescripV2Entry 2 } h3cIPsecTunInDecompOctetsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decompressed octets received by IPsec phase-2 tunnels. This value is accumulated AFTER the packet is decompressed." ::= { h3cIPsecTunnelStatByDescripV2Entry 3 } h3cIPsecTunInPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received by IPsec phase-2 tunnels." ::= { h3cIPsecTunnelStatByDescripV2Entry 4 } h3cIPsecTunInDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels during receiving process." ::= { h3cIPsecTunnelStatByDescripV2Entry 5 } h3cIPsecTunInReplayDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of receive packets dropped by IPsec phase-2 tunnels due to Anti-Replay processing." ::= { h3cIPsecTunnelStatByDescripV2Entry 6 } h3cIPsecTunInAuthFailsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound authentication failures on IPsec phase-2 tunnels." ::= { h3cIPsecTunnelStatByDescripV2Entry 7 } h3cIPsecTunInDecryptFailsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound decryption failures on IPsec phase-2 tunnels." ::= { h3cIPsecTunnelStatByDescripV2Entry 8 } h3cIPsecTunOutOctetsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets sent by IPsec phase-2 tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed." ::= { h3cIPsecTunnelStatByDescripV2Entry 9 } h3cIPsecTunOutUncompOctetsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uncompressed octets sent by IPsec phase-2 tunnels. This value is accumulated BEFORE the packet is compressed." ::= { h3cIPsecTunnelStatByDescripV2Entry 10 } h3cIPsecTunOutPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by IPsec phase-2 tunnels." ::= { h3cIPsecTunnelStatByDescripV2Entry 11 } h3cIPsecTunOutDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels during sending process." ::= { h3cIPsecTunnelStatByDescripV2Entry 12 } h3cIPsecTunOutEncryptFailsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound encryption failures on IPsec Phase-2 Tunnels." ::= { h3cIPsecTunnelStatByDescripV2Entry 13 } h3cIPsecTunNoMemoryDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels due to no enough memory." ::= { h3cIPsecTunnelStatByDescripV2Entry 14 } h3cIPsecTunQueueFullDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels due to queue full." ::= { h3cIPsecTunnelStatByDescripV2Entry 15 } h3cIPsecTunInvalidLenDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels due to invalid length packet." ::= { h3cIPsecTunnelStatByDescripV2Entry 16 } h3cIPsecTunTooLongDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels due to packet." ::= { h3cIPsecTunnelStatByDescripV2Entry 17 } h3cIPsecTunInvalidSaDropPktsByDescripV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped by IPsec phase-2 tunnels due to invalid SA." ::= { h3cIPsecTunnelStatByDescripV2Entry 18 } -- =============================================== -- Conformance Information -- =============================================== h3cIPsecConformanceV2 OBJECT IDENTIFIER ::= { h3cIPsecMonitorV2 2 } h3cIPsecCompliancesV2 OBJECT IDENTIFIER ::= { h3cIPsecConformanceV2 1 } h3cIPsecGroupsV2 OBJECT IDENTIFIER ::= { h3cIPsecConformanceV2 2 } -- =============================================== -- Compliance Statements -- =============================================== h3cIPsecComplianceV2 MODULE-COMPLIANCE STATUS current DESCRIPTION " " MODULE -- this module MANDATORY-GROUPS { h3cIPsecScalarObjectsGroupV2, h3cIPsecTunnelTableGroupV2, h3cIPsecTunnelStatGroupV2, h3cIPsecSaGroupV2, h3cIPsecTrafficTableGroupV2, h3cIPsecGlobalStatsGroupV2, h3cIPsecTrapObjectGroupV2, h3cIPsecTrapCntlGroupV2, h3cIPsecTrapGroupV2 } ::= { h3cIPsecCompliancesV2 1 } h3cIPsecScalarObjectsGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecMIBVersion } STATUS current DESCRIPTION "The group contains all of scalar objects of the MIB." ::= { h3cIPsecGroupsV2 1 } h3cIPsecTunnelTableGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecTunIfIndexV2, h3cIPsecTunIKETunnelIndexV2, h3cIPsecTunIKETunLocalIDTypeV2, h3cIPsecTunIKETunLocalIDVal1V2, h3cIPsecTunIKETunLocalIDVal2V2, h3cIPsecTunIKETunRemoteIDTypeV2, h3cIPsecTunIKETunRemoteIDVal1V2, h3cIPsecTunIKETunRemoteIDVal2V2, h3cIPsecTunLocalAddrTypeV2, h3cIPsecTunLocalAddrV2, h3cIPsecTunRemoteAddrTypeV2, h3cIPsecTunRemoteAddrV2, h3cIPsecTunKeyTypeV2, h3cIPsecTunEncapModeV2, h3cIPsecTunInitiatorV2, h3cIPsecTunLifeSizeV2, h3cIPsecTunLifeTimeV2, h3cIPsecTunRemainTimeV2, h3cIPsecTunActiveTimeV2, h3cIPsecTunRemainSizeV2, h3cIPsecTunTotalRefreshesV2, h3cIPsecTunCurrentSaInstancesV2, h3cIPsecTunInSaEncryptAlgoV2, h3cIPsecTunInSaAhAuthAlgoV2, h3cIPsecTunInSaEspAuthAlgoV2, h3cIPsecTunDiffHellmanGrpV2, h3cIPsecTunOutSaEncryptAlgoV2, h3cIPsecTunOutSaAhAuthAlgoV2, h3cIPsecTunOutSaEspAuthAlgoV2, h3cIPsecTunPolicyNameV2, h3cIPsecTunPolicyNumV2, h3cIPsecTunStatusV2, h3cIPsecTunPolicyDescriptionV2 } STATUS current DESCRIPTION "The group contains the IPsec tunnel's property information." ::= { h3cIPsecGroupsV2 2 } h3cIPsecTunnelStatGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecTunInOctetsV2, h3cIPsecTunInDecompOctetsV2, h3cIPsecTunInPktsV2, h3cIPsecTunInDropPktsV2, h3cIPsecTunInReplayDropPktsV2, h3cIPsecTunInAuthFailsV2, h3cIPsecTunInDecryptFailsV2, h3cIPsecTunOutOctetsV2, h3cIPsecTunOutUncompOctetsV2, h3cIPsecTunOutPktsV2, h3cIPsecTunOutDropPktsV2, h3cIPsecTunOutEncryptFailsV2, h3cIPsecTunNoMemoryDropPktsV2, h3cIPsecTunQueueFullDropPktsV2, h3cIPsecTunInvalidLenDropPktsV2, h3cIPsecTunTooLongDropPktsV2, h3cIPsecTunInvalidSaDropPktsV2 } STATUS current DESCRIPTION "The group contains the IPsec tunnel's statistic information." ::= { h3cIPsecGroupsV2 3 } h3cIPsecSaGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecSaDirectionV2, h3cIPsecSaSpiValueV2, h3cIPsecSaSecProtocolV2, h3cIPsecSaEncryptAlgoV2, h3cIPsecSaAuthAlgoV2, h3cIPsecSaStatusV2 } STATUS current DESCRIPTION "The group contains the SA's property information." ::= { h3cIPsecGroupsV2 4 } h3cIPsecTrafficTableGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecTrafficLocalTypeV2, h3cIPsecTrafficLocalAddr1TypeV2, h3cIPsecTrafficLocalAddr1V2, h3cIPsecTrafficLocalAddr2TypeV2, h3cIPsecTrafficLocalAddr2V2, h3cIPsecTrafficLocalProtocol1V2, h3cIPsecTrafficLocalProtocol2V2, h3cIPsecTrafficLocalPort1V2, h3cIPsecTrafficLocalPort2V2, h3cIPsecTrafficRemoteTypeV2, h3cIPsecTrafficRemAddr1TypeV2, h3cIPsecTrafficRemAddr1V2, h3cIPsecTrafficRemAddr2TypeV2, h3cIPsecTrafficRemAddr2V2, h3cIPsecTrafficRemoPro1V2, h3cIPsecTrafficRemoPro2V2, h3cIPsecTrafficRemPort1V2, h3cIPsecTrafficRemPort2V2 } STATUS current DESCRIPTION "The group contains the property information of the data flow protected by IPsec tunnel." ::= { h3cIPsecGroupsV2 5 } h3cIPsecGlobalStatsGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecGlobalActiveTunnelsV2, h3cIPsecGlobalActiveSasV2, h3cIPsecGlobalInOctetsV2, h3cIPsecGlobalInDecompOctetsV2, h3cIPsecGlobalInPktsV2, h3cIPsecGlobalInDropsV2, h3cIPsecGlobalInReplayDropsV2, h3cIPsecGlobalInAuthFailsV2, h3cIPsecGlobalInDecryptFailsV2, h3cIPsecGlobalOutOctetsV2, h3cIPsecGlobalOutUncompOctetsV2, h3cIPsecGlobalOutPktsV2, h3cIPsecGlobalOutDropsV2, h3cIPsecGlobalOutEncryptFailsV2, h3cIPsecGlobalNoMemoryDropsV2, h3cIPsecGlobalNoFindSaDropsV2, h3cIPsecGlobalQueueFullDropsV2, h3cIPsecGlobalInvalidLenDropsV2, h3cIPsecGlobalTooLongDropsV2, h3cIPsecGlobalInvalidSaDropsV2 } STATUS current DESCRIPTION "The group contains all of the IPsec tunnel's statistic information." ::= { h3cIPsecGroupsV2 6 } h3cIPsecTrapObjectGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecPolicyNameV2, h3cIPsecPolicySeqNumV2, h3cIPsecPolicySizeV2 } STATUS current DESCRIPTION "The group contains all of trap objects of IPsec tunnels." ::= { h3cIPsecGroupsV2 7 } h3cIPsecTrapCntlGroupV2 OBJECT-GROUP OBJECTS { h3cIPsecTrapGlobalCntlV2, h3cIPsecTunnelStartTrapCntlV2, h3cIPsecTunnelStopTrapCntlV2, h3cIPsecNoSaTrapCntlV2, h3cIPsecAuthFailureTrapCntlV2, h3cIPsecEncryFailureTrapCntlV2, h3cIPsecDecryFailureTrapCntlV2, h3cIPsecInvalidSaTrapCntlV2, h3cIPsecPolicyAddTrapCntlV2, h3cIPsecPolicyDelTrapCntlV2, h3cIPsecPolicyAttachTrapCntlV2, h3cIPsecPolicyDetachTrapCntlV2 } STATUS current DESCRIPTION "The group contains all of trap switches of IPsec tunnels." ::= { h3cIPsecGroupsV2 8 } h3cIPsecTrapGroupV2 NOTIFICATION-GROUP NOTIFICATIONS { h3cIPsecTunnelStartV2, h3cIPsecTunnelStopV2, h3cIPsecNoSaFailureV2, h3cIPsecAuthFailFailureV2, h3cIPsecEncryFailFailureV2, h3cIPsecDecryFailFailureV2, h3cIPsecInvalidSaFailureV2, h3cIPsecPolicyAddV2, h3cIPsecPolicyDelV2, h3cIPsecPolicyAttachV2, h3cIPsecPolicyDetachV2, h3cIPsecConnectionStartV2, h3cIPsecConnectionStopV2 } STATUS current DESCRIPTION "The group contains all of trap of IPsec tunnels." ::= { h3cIPsecGroupsV2 9 } END