-- ***************************************************************** -- FS-AP-MIB.mib: FS AP MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by FS.COM Inc.. -- All rights reserved. -- -- ***************************************************************** -- FS-AP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI PortList FROM Q-BRIDGE-MIB DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- ConfigStatus, MemberMap, IfIndex FROM FS-TC fsMgmt FROM FS-SMI; fsApMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "FS.COM Inc.." CONTACT-INFO " Tel: 400-865-2852 E-mail: https://www.fs.com/live_chat_service_mail.html" DESCRIPTION "This module defines fs aggregate port(AP) mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { fsMgmt 7} fsApMIBObjects OBJECT IDENTIFIER ::= { fsApMIB 1 } fsApMaxNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MAX aggregate ports this system supported." ::= { fsApMIBObjects 1 } fsApCurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current aggregate ports this system have." ::= { fsApMIBObjects 2 } fsApPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FSApPortConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "aggregate port table." ::= { fsApMIBObjects 3 } fsApPortConfigEntry OBJECT-TYPE SYNTAX FSApPortConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of aggregate port and it's port group table." INDEX { fsApPortConfigPortIndex } ::= { fsApPortConfigTable 1 } FSApPortConfigEntry ::= SEQUENCE { fsApPortConfigPortIndex IfIndex, fsApPortConfigApIndex IfIndex } fsApPortConfigPortIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION " " ::= { fsApPortConfigEntry 1 } fsApPortConfigApIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Set this value to 1 กซ fsApMaxNumber indicate that add this value to that aggregate port which this aggregate port must be valid. It separates this port from aggregate port to set this value to 0 " ::= { fsApPortConfigEntry 2 } fsApTable OBJECT-TYPE SYNTAX SEQUENCE OF FSApEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Aggregate ports table." ::= { fsApMIBObjects 4 } fsApEntry OBJECT-TYPE SYNTAX FSApEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of aggregate ports and it's distribution table." INDEX { fsApIndex } ::= { fsApTable 1 } FSApEntry ::= SEQUENCE { fsApIndex IfIndex, fsApMemberAction MemberMap, fsApPossibleMember MemberMap, fsApMaxPtNumber Integer32 -- fsApEntryStatus ConfigStatus } fsApIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Aggregate ports index." ::= { fsApEntry 1 } fsApMemberAction OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicates the port is not in the aggregate port. this object can be modified only when the status of this entry is invalid." ::= { fsApEntry 2 } fsApPossibleMember OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect can be set in the aggregate port. and 0 indicates the port is not possible be set in the aggregate port." ::= { fsApEntry 3 } fsApMaxPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Max number of ports this aggregate port can include." ::= { fsApEntry 4 } --fsApEntryStatus OBJECT-TYPE -- SYNTAX ConfigStatus -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "Status of this entry, set this object to valid will create a aggregate port, -- and set its value to invalid will delete the aggregate port of this entry." -- ::= { fsApEntry 5 } fsApFlowBalance OBJECT-TYPE SYNTAX INTEGER { unknown(0), source-mac(1), destination-mac(2), src-dest-mac(3), source-ip(4), destination-ip(5), src-dest-ip(6), src-dest-port(7), src-dst-ip-l4port(8), enhanced-profile(9), src-l4port(10), dest-l4port(11), src-dest-l4port(12), src-ip-l4port(13), dest-ip-l4port(14), src-ip-dest-l4port(15), dest-ip-src-l4port(16), src-dest-ip-src-l4port(17), src-dest-ip-dest-l4port(18), src-ip-src-dest-l4port(19), dest-ip-src-dest-l4port(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the AP traffic balancing algorithm.You can choose enhanced-profile after create a Enhanced mode profile" ::= { fsApMIBObjects 5 } -- fsApConfigTable from the 10.3(5) was started to support. fsApConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FSApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate ports table." ::= { fsApMIBObjects 6 } fsApConfigEntry OBJECT-TYPE SYNTAX FSApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of aggregate ports and it's distribution table." INDEX { fsApConfigNumber } ::= { fsApConfigTable 1 } FSApConfigEntry ::= SEQUENCE { fsApConfigNumber Integer32, fsApConfigIndex IfIndex, fsApConfigMaxPtNumber Integer32, fsApConfigCurrentPtNumber Integer32, fsApConfigPortMember PortList, fsApConfigAction Integer32 } fsApConfigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregate ports number.Set this value to 1 กซ fsApMaxNumber." ::= { fsApConfigEntry 1 } fsApConfigIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate ports index." ::= { fsApConfigEntry 2 } fsApConfigMaxPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MAX aggregate ports this system supported." ::= { fsApConfigEntry 3 } fsApConfigCurrentPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current ports this aggregate port have." ::= { fsApConfigEntry 4 } fsApConfigPortMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicates the port is not in the aggregate port. this object can be modified only when the status of this entry is invalid." ::= { fsApConfigEntry 5 } fsApConfigAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 1 to add an aggregate port, 0 to delete an aggregate port." ::= { fsApConfigEntry 6 } -- fsApPortMemberTable from the 10.3(5) was started to support. fsApPortMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF FSApPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate port table." ::= { fsApMIBObjects 7 } fsApPortMemberEntry OBJECT-TYPE SYNTAX FSApPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of aggregate port and it's port group table." INDEX { fsApPortMemberPortIndex } ::= { fsApPortMemberTable 1 } FSApPortMemberEntry ::= SEQUENCE { fsApPortMemberPortIndex IfIndex, fsApPortMemberApNumber Integer32, fsApPortMemberAction Integer32, fsApPortMemberLacpStatus Integer32 } fsApPortMemberPortIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION " a switch port index. " ::= { fsApPortMemberEntry 1 } fsApPortMemberApNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set this value to 1 กซ fsApMaxNumber indicate that add this value to that aggregate port." ::= { fsApPortMemberEntry 2 } fsApPortMemberAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 1 indcate add to an aggregate port, 0 to delete from an aggregate port." ::= { fsApPortMemberEntry 3 } fsApPortMemberLacpStatus OBJECT-TYPE SYNTAX INTEGER { not-lacp-member(0), down(1), bndl(2), susp(3), individual(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value indicates lacp status of aggregateport member." ::= { fsApPortMemberEntry 4 } -- fsApBalcProfName from the 10.4(3b17) was started to support. fsApBalcProfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enhanced mode profile name." ::= { fsApMIBObjects 8 } -- fsApProfTable from the 10.4(3b17) was started to support. fsApProfTable OBJECT-TYPE SYNTAX SEQUENCE OF FSApProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the enhanced mode profile." ::= { fsApMIBObjects 9 } fsApProfEntry OBJECT-TYPE SYNTAX FSApProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enhanced mode profile configuration entry." INDEX { fsApProfIdx } ::= { fsApProfTable 1 } FSApProfEntry ::= SEQUENCE { fsApProfIdx Integer32, fsApProfName DisplayString, -- L2 field fsApProfL2SrcMac TruthValue, fsApProfL2DestMac TruthValue, fsApProfL2Pro TruthValue, fsApProfL2Vlan TruthValue, fsApProfL2SrcPort TruthValue, -- Ipv4 field fsApProfIpv4SrcIp TruthValue, fsApProfIpv4DestIp TruthValue, fsApProfIpv4Pro TruthValue, fsApProfIpv4L4SrcPort TruthValue, fsApProfIpv4L4DestPort TruthValue, fsApProfIpv4Vlan TruthValue, fsApProfIpv4SrcPort TruthValue, -- Ipv6 field fsApProfIpv6SrcIp TruthValue, fsApProfIpv6DestIp TruthValue, fsApProfIpv6Pro TruthValue, fsApProfIpv6L4SrcPort TruthValue, fsApProfIpv6L4DestPort TruthValue, fsApProfIpv6Vlan TruthValue, fsApProfIpv6SrcPort TruthValue, -- mpls field fsApProfMplsTopLabel TruthValue, fsApProfMpls2ndLabel TruthValue, fsApProfMplsSrcIp TruthValue, fsApProfMplsDestIp TruthValue, fsApProfMplsVlan TruthValue, fsApProfMplsSrcPort TruthValue } fsApProfIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enhanced mode profile index." ::= { fsApProfEntry 1 } fsApProfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Enhanced mode profile name." ::= { fsApProfEntry 2 } -- L2 field fsApProfL2SrcMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source MAC address of incoming layer2 packet." ::= { fsApProfEntry 3 } fsApProfL2DestMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination MAC address of incoming layer2 packet." ::= { fsApProfEntry 4 } fsApProfL2Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the Ethernet type of the incoming layer2 packet." ::= { fsApProfEntry 5 } fsApProfL2Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming layer2 packet." ::= { fsApProfEntry 6 } fsApProfL2SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming layer2 packet." ::= { fsApProfEntry 7 } -- Ipv4 field fsApProfIpv4SrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming IPv4 packet." ::= { fsApProfEntry 8 } fsApProfIpv4DestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming IPv4 packet." ::= { fsApProfEntry 9 } fsApProfIpv4Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to protocol type of the incoming IPv4 packet." ::= { fsApProfEntry 10 } fsApProfIpv4L4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer source port of incoming IPv4 packet." ::= { fsApProfEntry 11 } fsApProfIpv4L4DestPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv4 packet." ::= { fsApProfEntry 12 } fsApProfIpv4Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming IPv4 packet." ::= { fsApProfEntry 13 } fsApProfIpv4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming IPv4 packet." ::= { fsApProfEntry 14 } -- IPv6 field fsApProfIpv6SrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming IPv6 packet." ::= { fsApProfEntry 15 } fsApProfIpv6DestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming IPv6 packet." ::= { fsApProfEntry 16 } fsApProfIpv6Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to protocol type of the incoming IPv6 packet." ::= { fsApProfEntry 17 } fsApProfIpv6L4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer source port of incoming IPv6 packet." ::= { fsApProfEntry 18 } fsApProfIpv6L4DestPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv6 packet." ::= { fsApProfEntry 19 } fsApProfIpv6Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming IPv6 packet." ::= { fsApProfEntry 20 } fsApProfIpv6SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming IPv6 packet." ::= { fsApProfEntry 21 } -- mpls field fsApProfMplsTopLabel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the top-label of the incoming mpls packet." ::= { fsApProfEntry 22 } fsApProfMpls2ndLabel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the 2nd-label of the incoming mpls packet." ::= { fsApProfEntry 23 } fsApProfMplsSrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming mpls packet." ::= { fsApProfEntry 24 } fsApProfMplsDestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming mpls packet." ::= { fsApProfEntry 25 } fsApProfMplsVlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming mpls packet." ::= { fsApProfEntry 26 } fsApProfMplsSrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming mpls packet." ::= { fsApProfEntry 27 } fsApMIBConformance OBJECT IDENTIFIER ::= { fsApMIB 2 } fsApMIBCompliances OBJECT IDENTIFIER ::= { fsApMIBConformance 1 } fsApMIBGroups OBJECT IDENTIFIER ::= { fsApMIBConformance 2 } -- compliance statements fsApMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the FS Ap MIB" MODULE -- this module MANDATORY-GROUPS { fsApMIBGroup } ::= { fsApMIBCompliances 1 } -- units of conformance fsApMIBGroup OBJECT-GROUP OBJECTS { fsApMaxNumber, fsApCurrentNumber, fsApPortConfigApIndex, fsApIndex, fsApMemberAction, fsApMaxPtNumber, fsApFlowBalance, -- fsApEntryStatus, fsApConfigNumber, fsApConfigIndex, fsApConfigMaxPtNumber, fsApConfigCurrentPtNumber, fsApConfigPortMember, fsApConfigAction, fsApPortMemberPortIndex, fsApPortMemberApNumber, fsApPortMemberAction, fsApPortMemberLacpStatus, fsApProfL2SrcMac, fsApProfL2DestMac, fsApProfL2Pro, fsApProfL2Vlan, fsApProfL2SrcPort, fsApProfIpv4SrcIp, fsApProfIpv4DestIp, fsApProfIpv4Pro, fsApProfIpv4L4SrcPort, fsApProfIpv4L4DestPort, fsApProfIpv4Vlan, fsApProfIpv4SrcPort, fsApProfIpv6SrcIp, fsApProfIpv6DestIp, fsApProfIpv6Pro, fsApProfIpv6L4SrcPort, fsApProfIpv6L4DestPort, fsApProfIpv6Vlan, fsApProfIpv6SrcPort, fsApProfMplsTopLabel, fsApProfMpls2ndLabel, fsApProfMplsSrcIp, fsApProfMplsDestIp, fsApProfMplsVlan, fsApProfMplsSrcPort } STATUS current DESCRIPTION "A collection of objects providing aggregate port configure." ::= { fsApMIBGroups 1 } END