-- ***************************************************************** -- RBN-ICR-MIB Ericsson Inter Chassis Resilience(ICR) MIB -- -- Copyright (c) 2011 Ericsson AB. -- All rights reserved. -- -- ***************************************************************** RBN-ICR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus FROM SNMPv2-TC InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB rbnMgmt FROM RBN-SMI; rbnIcrMIB MODULE-IDENTITY LAST-UPDATED "201101100000Z" -- Jan 10, 2011 ORGANIZATION "Ericsson AB." CONTACT-INFO " Ericsson, Inc. Postal: 100 Headquarters Drive San Jose, CA 95134-1370 USA Phone: +1 408 750 5000 Fax: +1 408 750 5599" DESCRIPTION "This MIB describes objects used for managing Inter Chassis Resilience(ICR)." REVISION "201101100000Z" -- Jan 10, 2011 DESCRIPTION "Initial Version." ::= { rbnMgmt 101 } rbnIcrNotifications OBJECT IDENTIFIER ::= { rbnIcrMIB 0 } rbnIcrMIBObjects OBJECT IDENTIFIER ::= { rbnIcrMIB 1 } rbnIcrMIBConformance OBJECT IDENTIFIER ::= { rbnIcrMIB 2 } -- -- Inter Chassis Resilience(ICR) Table -- rbnIcrTable OBJECT-TYPE SYNTAX SEQUENCE OF RbnIcrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of ICR management objects." ::= { rbnIcrMIBObjects 1 } rbnIcrEntry OBJECT-TYPE SYNTAX RbnIcrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains management objects of an ICR node." INDEX { rbnIcrId } ::= { rbnIcrTable 1 } RbnIcrEntry ::= SEQUENCE { rbnIcrId Integer32, rbnIcrLocalAddressType InetAddressType, rbnIcrLocalAddress InetAddress, rbnIcrLocalPort InetPortNumber, rbnIcrPeerAddressType InetAddressType, rbnIcrPeerAddress InetAddress, rbnIcrPeerPort InetPortNumber, rbnIcrPriority INTEGER, rbnIcrKeepAliveInterval Integer32, rbnIcrHoldTime Integer32, rbnIcrState INTEGER, rbnIcrAdminStatus INTEGER, rbnIcrRowStatus RowStatus } rbnIcrId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the ICR node." ::= { rbnIcrEntry 1 } rbnIcrLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of 'rbnIcrLocalAddress'." DEFVAL { unknown } ::= { rbnIcrEntry 2 } rbnIcrLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the local address used to send/receive ICR messages. The type of the address is determined by the corresponding 'rbnIcrLocalAddressType'." DEFVAL { ''H } ::= { rbnIcrEntry 3 } rbnIcrLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the local port number used to send/receive ICR messages." DEFVAL { 0 } ::= { rbnIcrEntry 4 } rbnIcrPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of 'rbnIcrPeerAddress'." DEFVAL { unknown } ::= { rbnIcrEntry 5 } rbnIcrPeerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the address used by the peer ICR node to send/receive ICR messages. The type of the address is determined by the corresponding 'rbnIcrPeerAddressType'." DEFVAL { ''H } ::= { rbnIcrEntry 6 } rbnIcrPeerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the port number used by the peer ICR node to send/receive ICR messages." DEFVAL { 0 } ::= { rbnIcrEntry 7 } rbnIcrPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ICR priority. The priority is used for setting the initial preference level when the prefixes are advertised and is used for tie-break in case both the local ICR node and its peer node are booted up at the same time. The local and the peer ICR nodes MUST configure different priorities" DEFVAL { low } ::= { rbnIcrEntry 8 } rbnIcrKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the interval that the node sends ICR keep alive messages to its peer node." DEFVAL { 1 } ::= { rbnIcrEntry 9 } rbnIcrHoldTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the time, after which, if the node has not received a ICR keep alive message from its peer node, it declares the peer loss." DEFVAL { 10 } ::= { rbnIcrEntry 10 } rbnIcrState OBJECT-TYPE SYNTAX INTEGER { initialize(1), active(2), standby(3), pendingStandby(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current ICR state: - 'initialize', which indicates that the node is in the process of deciding its role(active or standby). - 'active', which indicates that the node operates as ICR active node. - 'standby', which indicates that the node operates as ICR standby node. - 'pendingStandby', which indicates that the node(previously in 'active' state) is waiting for operator intervention to transit to 'standby' state after ICR switchover." ::= { rbnIcrEntry 11 } rbnIcrAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls ICR node. Setting this object to 'up' will enable the ICR node. The node will transition from 'initialize' state to 'active' or 'standby' state depending on the value of 'rbnIcrPriority'. Setting this object to 'down' will disable the ICR node. The node will transition from its current state to 'initialize'. To modify other 'read-create' objects in the conceptual row, the 'rbnIcrAdminStatus' object must be set to 'down'. The value of the 'rbnIcrRowStatus' object must be 'active' in order for this object to be set to 'up'." DEFVAL { down } ::= { rbnIcrEntry 12 } rbnIcrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create and delete 'rbnIcrEntry' conceptual rows. Except 'rbnIcrAdminStatus', 'read-create' objects in the conceptual row cannot be modified when rbnIcrRowStatus is set to active(1). To change 'rbnIcrRowStatus' from 'active' to a different value, the 'rbnIcrAdminStatus' object must be 'down'. To create a row in this table, 'rbnIcrRowStatus' could be set to either 'createAndGo(4)' or 'createAndWait(5)'. Until all objects in the conceptual row are appropriately configured, 'rbnIcrRowStatus' will transit to 'notReady(3)'." ::= { rbnIcrEntry 13 } -- -- ICR Notifications -- rbnIcrInconsistencyError OBJECT-TYPE SYNTAX INTEGER { peerLoss(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the ICR inconsistency error code." ::= { rbnIcrMIBObjects 2 } rbnIcrNewActive NOTIFICATION-TYPE OBJECTS { rbnIcrLocalAddressType, rbnIcrLocalAddress, rbnIcrLocalPort, rbnIcrState } STATUS current DESCRIPTION "This notification is sent when the state of the ICR node has changed to active." ::= { rbnIcrNotifications 1 } rbnIcrNewStandby NOTIFICATION-TYPE OBJECTS { rbnIcrLocalAddressType, rbnIcrLocalAddress, rbnIcrLocalPort, rbnIcrPeerAddressType, rbnIcrPeerAddress, rbnIcrPeerPort, rbnIcrState } STATUS current DESCRIPTION "This notification is sent when the state of the ICR node has changed to standby." ::= { rbnIcrNotifications 2 } rbnIcrNewPendingStandby NOTIFICATION-TYPE OBJECTS { rbnIcrLocalAddressType, rbnIcrLocalAddress, rbnIcrLocalPort, rbnIcrPeerAddressType, rbnIcrPeerAddress, rbnIcrPeerPort, rbnIcrState } STATUS current DESCRIPTION "This notification is sent when the state of the ICR node has changed to pendingStandby." ::= { rbnIcrNotifications 3 } rbnIcrInconsistency NOTIFICATION-TYPE OBJECTS { rbnIcrLocalAddressType, rbnIcrLocalAddress, rbnIcrLocalPort, rbnIcrPeerAddressType, rbnIcrPeerAddress, rbnIcrPeerPort, rbnIcrInconsistencyError } STATUS current DESCRIPTION "This notification is sent when an ICR inconsistency error is encountered." ::= { rbnIcrNotifications 4 } -- -- Conformance Information -- rbnIcrMIBCompliances OBJECT IDENTIFIER ::= { rbnIcrMIBConformance 1 } rbnIcrMIBGroups OBJECT IDENTIFIER ::= { rbnIcrMIBConformance 2 } rbnIcrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for ICR MIB implementations." MODULE -- this module MANDATORY-GROUPS { rbnIcrGroup, rbnIcrNotificationObjectGroup, rbnIcrNotificationGroup } OBJECT rbnIcrLocalAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only IPv4 and IPv6 addresses require to support." OBJECT rbnIcrLocalAddress SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only IPv4 and IPv6 addresses require to support." OBJECT rbnIcrLocalPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrPeerAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only IPv4 and IPv6 addresses require to support." OBJECT rbnIcrPeerAddress SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only IPv4 and IPv6 addresses require to support." OBJECT rbnIcrPeerPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrKeepAliveInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrHoldTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT rbnIcrRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { rbnIcrMIBCompliances 1 } rbnIcrGroup OBJECT-GROUP OBJECTS { rbnIcrLocalAddressType, rbnIcrLocalAddress, rbnIcrLocalPort, rbnIcrPeerAddressType, rbnIcrPeerAddress, rbnIcrPeerPort, rbnIcrPriority, rbnIcrKeepAliveInterval, rbnIcrHoldTime, rbnIcrState, rbnIcrAdminStatus, rbnIcrRowStatus } STATUS current DESCRIPTION "Conformance group for ICR objects." ::= { rbnIcrMIBGroups 1 } rbnIcrNotificationObjectGroup OBJECT-GROUP OBJECTS { rbnIcrInconsistencyError } STATUS current DESCRIPTION "Conformance group for objects contained in ICR notifications." ::= { rbnIcrMIBGroups 2 } rbnIcrNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnIcrNewActive, rbnIcrNewStandby, rbnIcrNewPendingStandby, rbnIcrInconsistency } STATUS current DESCRIPTION "Conformance group for ICR notifications." ::= { rbnIcrMIBGroups 3 } END